Local undefined weak symbol should always be resolved to 0.
* elf32-i386.c (UNDEFINED_WEAK_RESOLVED_TO_ZERO): Resolve
local undefined weak symbol to 0.
* elf64-x86-64.c (UNDEFINED_WEAK_RESOLVED_TO_ZERO): Likewise.
The self tests which compare pre-generated target descriptions and
dynamically created target descriptions fail, and it turns out that two
pre-generated target descriptions are wrong, so regenerate them.
gdb:
2017-06-22 Yao Qi <yao.qi@linaro.org>
* regformats/i386/amd64-avx-mpx-avx512-pku-linux.dat: Regenerated.
* regformats/i386/amd64-avx-mpx-avx512-pku.dat: Regenerated.
To support IBT in Intel Control-flow Enforcement Technology (CET)
instructions:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
#define GNU_PROPERTY_X86_FEATURE_1_AND 0xc0000002
#define GNU_PROPERTY_X86_FEATURE_1_IBT (1U << 0)
are added to GNU program properties to indicate that all executable
sections are compatible with IBT when ENDBR instruction starts each
valid target where an indirect branch instruction can land.
GNU_PROPERTY_X86_FEATURE_1_IBT is set on output only if it is set on
all relocatable inputs.
The followings changes are made to the Procedure Linkage Table (PLT):
1. For 64-bit x86-64, PLT is changed to
PLT0: push GOT[1]
bnd jmp *GOT[2]
nop
...
PLTn: endbr64
push namen_reloc_index
bnd jmp PLT0
together with the second PLT section:
PLTn: endbr64
bnd jmp *GOT[namen_index]
nop
BND prefix is also added so that IBT-enabled PLT is compatible with MPX.
2. For 32-bit x86-64 (x32) and i386, PLT is changed to
PLT0: push GOT[1]
jmp *GOT[2]
nop
...
PLTn: endbr64 # endbr32 for i386.
push namen_reloc_index
jmp PLT0
together with the second PLT section:
PLTn: endbr64 # endbr32 for i386.
jmp *GOT[namen_index]
nop
BND prefix isn't used since MPX isn't supported on x32 and BND registers
aren't used in parameter passing on i386.
GOT is an array of addresses. Initially, GOT[namen_index] is filled
with the address of the ENDBR instruction of the corresponding entry
in the first PLT section. The function, namen, is called via the
ENDBR instruction in the second PLT entry. GOT[namen_index] is updated
to the actual address of the function, namen, at run-time.
2 linker command line options are added:
1. -z ibtplt: Generate IBT-enabled PLT.
2. -z ibt: Generate GNU_PROPERTY_X86_FEATURE_1_IBT in GNU program
properties as well as IBT-enabled PLT.
bfd/
* elf32-i386.c (elf_i386_lazy_ibt_plt0_entry): New.
(elf_i386_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_lazy_ibt_plt0_entry): Likewise.
(elf_i386_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_eh_frame_lazy_ibt_plt): Likewise.
(elf_i386_lazy_plt_layout): Likewise.
(elf_i386_non_lazy_plt_layout): Likewise.
(elf_i386_link_hash_entry): Add plt_second.
(elf_i386_link_hash_table): Add plt_second and
plt_second_eh_frame.
(elf_i386_allocate_dynrelocs): Use the second PLT if needed.
(elf_i386_size_dynamic_sections): Use .plt.got unwind info for
the second PLT. Check the second PLT.
(elf_i386_relocate_section): Use the second PLT to resolve
PLT reference if needed.
(elf_i386_finish_dynamic_symbol): Fill and use the second PLT if
needed.
(elf_i386_finish_dynamic_sections): Set sh_entsize on the
second PLT. Generate unwind info for the second PLT.
(elf_i386_plt_type): Add plt_second.
(elf_i386_get_synthetic_symtab): Support the second PLT.
(elf_i386_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_i386_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_i386_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
* elf64-x86-64.c (elf_x86_64_lazy_ibt_plt_entry): New.
(elf_x32_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_non_lazy_ibt_plt_entry): Likewise.
(elf_x32_non_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_eh_frame_lazy_ibt_plt): Likewise.
(elf_x32_eh_frame_lazy_ibt_plt): Likewise.
(elf_x86_64_lazy_ibt_plt): Likewise.
(elf_x32_lazy_ibt_plt): Likewise.
(elf_x86_64_non_lazy_ibt_plt): Likewise.
(elf_x32_non_lazy_ibt_plt): Likewise.
(elf_x86_64_get_synthetic_symtab): Support the second PLT.
(elf_x86_64_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_x86_64_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_x86_64_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
binutils/
* readelf.c (decode_x86_feature): New.
(print_gnu_property_note): Call decode_x86_feature on
GNU_PROPERTY_X86_FEATURE_1_AND.
* testsuite/binutils-all/i386/empty.d: New file.
* testsuite/binutils-all/i386/empty.s: Likewise.
* testsuite/binutils-all/i386/ibt.d: Likewise.
* testsuite/binutils-all/i386/ibt.s: Likewise.
* testsuite/binutils-all/x86-64/empty-x32.d: Likewise.
* testsuite/binutils-all/x86-64/empty.d: Likewise.
* testsuite/binutils-all/x86-64/empty.s: Likewise.
* testsuite/binutils-all/x86-64/ibt-x32.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.s: Likewise.
include/
* bfdlink.h (bfd_link_info): Add ibtplt and ibt.
* elf/common.h (GNU_PROPERTY_X86_FEATURE_1_AND): New.
(GNU_PROPERTY_X86_FEATURE_1_IBT): Likewise.
ld/
* Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emulparams/cet.sh.
* Makefile.in: Regenerated.
* NEWS: Mention GNU_PROPERTY_X86_FEATURE_1_IBT, -z ibtplt
and -z ibt.
* emulparams/cet.sh: New file.
* testsuite/ld-i386/ibt-plt-1.d: Likewise.
* testsuite/ld-i386/ibt-plt-1.s: Likewise.
* testsuite/ld-i386/ibt-plt-2.s: Likewise.
* testsuite/ld-i386/ibt-plt-2a.d: Likewise.
* testsuite/ld-i386/ibt-plt-2b.d: Likewise.
* testsuite/ld-i386/ibt-plt-2c.d: Likewise.
* testsuite/ld-i386/ibt-plt-2d.d: Likewise.
* testsuite/ld-i386/ibt-plt-3.s: Likewise.
* testsuite/ld-i386/ibt-plt-3a.d: Likewise.
* testsuite/ld-i386/ibt-plt-3b.d: Likewise.
* testsuite/ld-i386/ibt-plt-3c.d: Likewise.
* testsuite/ld-i386/ibt-plt-3d.d: Likewise.
* testsuite/ld-i386/plt-main-ibt.dd: Likewise.
* testsuite/ld-i386/plt-pie-ibt.dd: Likewise.
* testsuite/ld-i386/property-x86-empty.s: Likewise.
* testsuite/ld-i386/property-x86-ibt.s: Likewise.
* testsuite/ld-i386/property-x86-ibt1a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt1b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt2.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt4.d: Likewise.
* testsuite/ld-i386/property-x86-ibt5.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d.d: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-now.rd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt.dd: Likewise.
* testsuite/ld-x86-64/property-x86-empty.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5.d: Likewise.
* emulparams/elf32_x86_64.sh: Source emulparams/cet.sh.
(TINY_READONLY_SECTION): Add .plt.sec.
* emulparams/elf_i386.sh: Likewise.
* emulparams/elf_x86_64.sh: Source emulparams/cet.sh.
* ld.texinfo: Document -z ibtplt and -z ibt.
* testsuite/ld-i386/i386.exp: Run IBT and IBT PLT tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-x86-64/pr21481b.S (check): Updated for x32.
clang gives this warning:
..../gdb/unittests/environ-selftests.c:139:7: error: explicitly moving variable of type 'gdb_environ' to itself [-Werror,-Wself-move]
env = std::move (env);
~~~ ^ ~~~
Ignoring the warning locally is the right thing to do, since it warns
about behavior we want to unit test, while an explicit self-move in
real code would likely be a mistake that we'd want to catch.
To avoid cluttering the code with preprocessor conditionals, this
commit adds the file common/diagnostics.h, in which we can put macros
used to control compiler diagnostics.
GCC enhancement request here:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81159
gdb/ChangeLog:
2017-06-22 Pedro Alves <palves@redhat.com>
Simon Marchi <simon.marchi@ericsson.com>
* unittests/environ-selftests.c (run_tests): Ignore -Wself-move
warning.
* common/diagnostics.h: New file.
We have several copies of this common idiom under gdb/ currently.
This commit moves them / factors them out to gdb/common/preprocessor.h.
gdb/ChangeLog:
2017-06-22 Pedro Alves <palves@redhat.com>
* common/agent.h: Include "common/preprocessor.h".
(STRINGIZE_1, STRINGIZE): Delete.
(IPA_SYM): Use STRINGIFY instead.
* common/preprocessor.h (STRINGIFY_1, STRINGIFY): New.
* compile/compile-c-support.c: Include "common/preprocessor.h".
(STR, STRINGIFY): Delete.
* ia64-libunwind-tdep.c: Include "common/preprocessor.h".
(STRINGIFY2, STRINGIFY): Delete.
PR binutils/21649
* som.c (setup_sections): NUL terminate the space_strings buffer.
Check that the space.name field does not index beyond the end of
the space_strings buffer.
Use DWARF_VMA_FMT to report error to work for both 32-bit and 64-bit
builds.
* dwarf.c (READ_ULEB): Use DWARF_VMA_FMT to report error.
(READ_SLEB): Likewise.
This is the portion of gdb_test which performs the match against
the RE (regular expression) passed to it:
return [gdb_test_multiple $command $message {
-re "\[\r\n\]*($pattern)\[\r\n\]+$gdb_prompt $" {
if ![string match "" $message] then {
pass "$message"
}
}
In a test that I've been working on recently, I wanted to use
a backreference - that's the \1 in the the RE below:
gdb_test "info threads" \
{.*[\r\n]+\* +([0-9]+) +Thread[^\r\n]* do_something \(n=\1\) at.*}
Put into English, I wanted to make sure that the value of n passed to
do_something() is the same as the thread number shown in the "info
threads" Id column. (I've structured the test case so that this
*should* be the case.)
It didn't work though. It turned out that ($pattern) in the RE
noted above is capturing the attempted backreference. So, in this
case, the backreference does not refer to ([0-9]+) as intended, but
instead refers to ($pattern). This is wrong because it's not what I
intended, but is also wrong because, if allowed, it could only match a
string of infinite length.
This problem can be fixed by using parens for a "noncapturing
subpattern". The way that this is done, syntactically, is to use
(?:$pattern) instead of ($pattern).
My research shows that this feature has been present since tcl8.1 which
was released in 1999.
The current tcl version is 8.6 - at least that's what I have on my
machine. It appears to me that mingw uses some subversion of tcl8.4
which will also have this feature (since 8.4 > 8.1).
So it seems to me that any platform upon which we might wish to test
GDB will have a version of tcl which has this feature. That being the
case, my hope is that there won't be any objections to its use.
When I looked at the implementation of gdb_test, I wondered whether
the parens were needed at all. I've concluded that they are. In the
event that $pattern is an RE which uses alternation at the top level,
e.g. a|b, we need to make $pattern a subpattern (via parens) to limit
the extend of the alternation. I.e, we don't want the alternation to
extend to the other portions of the RE which gdb_test uses to match
potential blank lines at the beginning of the pattern or the gdb
prompt at the end.
gdb/testsuite/ChangeLog:
* gdb.exp (gdb_test): Using noncapturing parens for the $pattern
subpattern.
PR binutils/21648
* dwarf.c (LEB): Rename to SKIP_ULEB and READ_ULEB. Add check for
reading a value that is too big for the containing variable.
(SLEB): Rename to SKIP_SLEB and READ_SLEB. Add similar check.
Replace uses of LEB and SLEB with appropriate new macro.
(display_debug_frames): Use an unsigned int for the 'reg'
variable. Use a signed long for the 'l' variable.
=== Context ===
This patch is part of a patch series to add support for ARMv8-R
architecture. Its purpose is to rework the Tag_CPU_arch build attribute
value selection to (i) match architecture or CPU if specified by user
without any need for hack and (ii) match an architecture with all the
features used if in autodetection mode or return an error.
=== Motivation ===
Currently, Tag_CPU_arch build attribute value selection assumes that an
architecture is always a superset of architectures released earlier. As
such, the logic is to browse architectures in chronological order of
release and selecting the Tag_CPU_arch value of the last one to
contribute a feature used[1]/requested[2] not contributed by earlier
architectures.
[1] in case of autodetection mode
[2] otherwise, ie. in case of -mcpu/-march or associated directives
This logic fails the two objectives mentionned in the Context section.
First, due to the assumption it does an architecture can be selected
while not having all the features used/requested which fails the second
objective. Second, not doing an exact match when an architecture or CPU
is selected by the user means the wrong value is chosen when a later
architecture provides a subset of the feature bits of an earlier
architecture. This is the case for the implementation of ARMv8-R (see
later patch).
An added benefit of this patch is that it is possible to easily generate
more consistent build attribute by setting the feature bits from the
architecture matched in aeabi_set_public_attributes in autodetection
mode. This is better done as a separate patch because lots of testcase'
expected results must then be updated accordingly.
=== Patch description ===
The patch changes the main logic for Tag_CPU_arch and
Tag_CPU_arch_profile
values selection to:
- look for an exact match in case an architecture or CPU was specified
on the command line or in a directive
- select the first released architecture that provides a superset of the
feature used in the autodetection case
- select the most featureful architecture in case of -march=all
The array cpu_arch_ver is updated to include all architectures in order
to make the first point work.
Note that when looking for an exact match, the architecture with
selected extension is tried first and then only the architecture. This
is because some architectures are exactly equivalent to an earlier
architecture with its extensions selected. ARMv6S-M (= ARMv6-M + OS
extension) and ARMv6KZ (ARMv6K + security extension) are two such
examples.
Other adjustments are also necessary in aeabi_set_public_attributes to
make this change work.
1) The logic to set Tag_ARM_ISA_use and Tag_THUMB_ISA_use must check the
absence of feature bit used/requested to decide whether to give the
default value for empty files (see EABI attribute defaults test). It was
previously checking that arch == 0 which would only happen if no feature
bit could be matched by any architecture, ie there is no feature bit to
match.
2) A fallback to a superset match must exist when no_cpu_selected ()
returns true. This is because aeabi_set_public_attributes is called
again after relaxation and at this point selected_cpu is set from the
previous execution of that function. There is therefore no way to check
whether the user specified an architecture or CPU.
3) Tag_CPU_arch lines are removed from expected output when the
detected architecture should be pre-ARMv4, since 0 is the Tag_CPU_arch
value for pre-ARMv4 architectures and default value for an absent entry
is 0.
2017-06-21 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (fpu_any): Defined from FPU_ANY.
(cpu_arch_ver): Add all architectures and sort by release date.
(have_ext_for_needed_feat_p): New.
(get_aeabi_cpu_arch_from_fset): New.
(aeabi_set_public_attributes): Call above function to determine
Tag_CPU_arch and Tag_CPU_arch_profile values. Adapt Tag_ARM_ISA_use
and Tag_THUMB_ISA_use selection logic to check absence of feature bit
accordingly.
* testsuite/gas/arm/attr-march-armv1.d: Fix expected Tag_CPU_arch build
attribute value.
* testsuite/gas/arm/attr-march-armv2.d: Likewise.
* testsuite/gas/arm/attr-march-armv2a.d: Likewise.
* testsuite/gas/arm/attr-march-armv2s.d: Likewise.
* testsuite/gas/arm/attr-march-armv3.d: Likewise.
* testsuite/gas/arm/attr-march-armv3m.d: Likewise.
* testsuite/gas/arm/pr12198-2.d: Likewise.
include/
* opcode/arm.h (FPU_ANY): New macro.
Update x86 assembler and disassembler for CET v2.0:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
1. incsspd and incsspq are changed to take a register opeand with a
different opcode.
2. setssbsy is changed to take no opeand with a different opcode.
gas/
* testsuite/gas/i386/cet-intel.d: Updated.
* testsuite/gas/i386/cet.d: Likewise.
* testsuite/gas/i386/x86-64-cet-intel.d: Likewise.
* testsuite/gas/i386/x86-64-cet.d: Likewise.
* testsuite/gas/i386/cet.s: Update incsspd and setssbsy tests.
* testsuite/gas/i386/x86-64-cet.s: Likewise.
opcodes/
* i386-dis.c (RM_0FAE_REG_5): Removed.
(PREFIX_MOD_3_0F01_REG_5_RM_1): Likewise.
(PREFIX_MOD_3_0F01_REG_5_RM_0): New.
(PREFIX_MOD_3_0FAE_REG_5): Likewise.
(prefix_table): Remove PREFIX_MOD_3_0F01_REG_5_RM_1. Add
PREFIX_MOD_3_0F01_REG_5_RM_0.
(prefix_table): Update PREFIX_MOD_0_0FAE_REG_5. Add
PREFIX_MOD_3_0FAE_REG_5.
(mod_table): Update MOD_0FAE_REG_5.
(rm_table): Update RM_0F01_REG_5. Remove RM_0FAE_REG_5.
* i386-opc.tbl: Update incsspd, incsspq and setssbsy.
* i386-tbl.h: Regenerated.
PR binutils/21639
* vms-misc.c (_bfd_vms_save_sized_string): Use unsigned int as
type of the size parameter.
(_bfd_vms_save_counted_string): Add second parameter - the maximum
length of the counted string.
* vms.h (_bfd_vms_save_sized_string): Update prototype.
(_bfd_vms_save_counted_string): Likewise.
* vms-alpha.c (_bfd_vms_slurp_eisd): Update calls to
_bfd_vms_save_counted_string.
(_bfd_vms_slurp_ehdr): Likewise.
(_bfd_vms_slurp_egsd): Likewise.
(Parse_module): Likewise.
=== Context ===
This patch is part of a patch series to add support for ARMv8-R
architecture. Its purpose is to allow ARMv7 to be selected in automatic
architecture selection in presence of Thumb division instructions.
=== Motivation ===
any-idiv.d and automatic-sdiv.d testcases in GAS testsuite expect
autodetection code to select ARMv7 in presence of Thumb integer
division. However, the definition of ARM_AEXT_V7 and thus ARM_ARCH_V7 do
not contain these instructions and the idiv extension is only available
for ARMv7-A and ARMv7-R. Therefore, under the stricter automatic
detection code proposed in the subsequent patch of the series ARMv7 is
refused if a Thumb division instruction is present.
=== Patch description ===
This patch adds a new "idiv" extension after the existing one that is
available to all ARMv7 targets. This new entry is ignored by all current
code parsing arm_extensions such that it would be unavailable on the
command-line and remain a purely internal hack, easily removed in favor
of a better solution later. This is considered though by the subsequent
patch reworking automatic detection of build attributes such that ARMv7
is allowed to match in present of Thumb division instructions. For good
measure, comments are added in all instances of code browsing
arm_extensions to mention the expected behavior in case of duplicate
entries as well as a new testcase.
2017-06-20 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (arm_extensions): New duplicate idiv entry to enable
Thumb division for ARMv7 architecture.
(arm_parse_extension): Document expected behavior for duplicate
entries.
(s_arm_arch_extension): Likewise.
* testsuite/gas/arm/forbid-armv7-idiv-ext.d: New test.
* testsuite/gas/arm/forbid-armv7-idiv-ext.l: New expected output for
above test.
=== Context ===
This patch is part of a patch series to add support for ARMv8-R
architecture. Its purpose is to set the feature bits on which to decide
what the build attributes should be according to the mode
(autodetection, user specified architecture or CPU, or
-march/-mcpu=all).
=== Motivation ===
Currently, the flags variable which is used to determine the build
attribute is constructed from the instruction used (arm_arch_used and
thumb_arch_used) as well as the user specified architecture or CPU
(selected_cpu). This means when several .arch are specified the
resulting feature bits can be such that no architecture provide them
all and can thus result in incorrect Tag_CPU_arch. See for instance
what having both .arch armv8-a and .arch armv8-m.base would result in.
This is not caught by the testsuite because of further bugs in the
Tag_CPU_arch build attribute value selection logic (see next patch in
the series).
=== Patch description ===
As one would expect, this patch solves the problem by setting flags
from feature bits used if in autodetection mode [1] and from
selected_cpu otherwise. The logic to set arm_ext_v1, arm_ext_v4t and
arm_ext_os feature bits is also moved to only run in autodetection mode
since otherwise the architecture or CPU would have a consistent set of
feature bits already.
[1] No architecture or CPU was specified by the user
2017-06-21 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (aeabi_set_public_attributes): Populate flags from
feature bits used or selected_cpu depending on whether a CPU was
selected by the user.
I was lazy when adding indx_ to Plt_stub_ent. The field isn't part of
the key, so ought to be part of the mapped type. Make it so.
* powerpc.cc (Plt_stub_key): Rename from Plt_stub_ent. Remove indx_.
(Plt_stub_key_hash): Rename from Plt_stub_ent_hash.
(struct Plt_stub_ent): New.
(Plt_stub_entries): Map from Plt_stub_key to Plt_stub_ent. Adjust
use throughout file.
These don't need a following nop. Also, a localentry:0 plt call
marked with an R_PPC64_TOCSAVE reloc should ignore the tocsave.
There's no need to save r2 in the prologue for such calls.
* elf64-ppc.c (ppc64_elf_size_stubs): Test for localentry:0 plt
calls before tocsave calls.
(ppc64_elf_relocate_section): Allow localentry:0 plt calls without
following nop.
=== Context ===
This patch is part of a patch series to add support for ARMv8-R
architecture. Its purpose is to simplify the logic to decide whether to
set Tag_DSP_extension.
=== Motivation ===
To decide whether to set Tag_DSP_extension, the current code was
checking whether the flags had DSP instruction but the architecture
selected for Tag_CPU_arch did not have any. This was necessary because
extension feature bit were not available separately. This is no longer
necessary and can be simplified.
=== Patch description ===
The patch change the logic to set Tag_DSP_extension to check whether any
DSP feature bit is set in the extension feature bit, as per the
definition of that build attribute. The patch also removes all
definitions of arm_arch which is now unneeded.
2017-06-21 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (aeabi_set_public_attributes): Test *mcpu_ext_opt to
decide whether to set Tag_DSP_extension build attribute value. Remove
now useless arm_arch variable.
=== Context ===
This patch is part of a patch series to add support for ARMv8-R
architecture. Its purpose is to keep the distinction between
architecture feature bits and extension ones after parsing has occured.
=== Motivation ===
This distinction is necessary to allow the Tag_CPU_arch build attribute
value to be exactly as per the architecture of the selected CPU. With
mixed architecture and extension feature bit, it is impossible to find
an architecture with an exact match of feature bit and the build
attribute value logic must then select the closest match which might not
be the right architecture. The previous patch in the patch series makes
the distinction possible when parsing -mcpu and .cpu directives but the
distinction gets lost after. Similarly feature bits contributed by
extensions in -march or .arch_extensions directive are mixed together
with architecture extensions.
=== Patch description ===
The patch adds new feature bit pointer for extension feature bits.
Information from the parsing regarding extensions can then be kept
separate in those. This requires adapting arm_parse_extension to deal
with two feature bits, allowing the architecture bits to be marked as
const. It also requires extra care when setting cpu_variant and
selected_cpu because the extension bits are optional since there might
not be any extension in use.
Note that contrary to cpu feature bits, the extension feature bits are
made read/write and are always dynamically allocated. This allows to
unconditionally free them in arm_md_post_relax added for this occasion,
thereby fixing a longstanding memory leak when arm_parse_extension was
invoked (XNEW of ext_fset without corresponding XDELETE).
Introduction of arm_md_post_relax is necessary to only free the
extension feature bits after aeabi_set_attribute_string has been called
for the last time.
2017-06-21 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (dyn_mcpu_ext_opt): New static variable.
(dyn_march_ext_opt): Likewise.
(md_begin): Copy extension feature bits alongside architecture ones.
Merge extensions feature bits in selected_cpu and cpu_variant if there
is some.
(arm_parse_extension): Pass architecture and extension feature bits in
separate parameters, with architecture bits being read only. Update
**opt_p directly rather than *ext_set and initialize it if needed.
(arm_parse_cpu): Stop merging architecture and extension feature bits
and instead use mcpu_cpu_opt and dyn_mcpu_ext_opt to memorize them
respectively. Adapt to change in parameters of arm_parse_extension.
(arm_parse_arch): Adapt to change in parameters of arm_parse_extension.
(aeabi_set_attribute_string): Make function static.
(arm_md_post_relax): New function.
(s_arm_cpu): Stop merging architecture and extension feature bits and
instead use mcpu_cpu_opt and dyn_mcpu_ext_opt to memorize them
respectively. Merge extension feature bits in cpu_variant
if there is any.
(s_arm_arch): Reset extension feature bit. Set selected_cpu from
*mcpu_cpu_opt and cpu_variant from selected_cpu and *mfpu_opt for
consistency with s_arm_cpu.
(s_arm_arch_extension): Update *dyn_mcpu_ext_opt rather than
selected_cpu, allocating it before hand if needed. Set selected_cpu
from it and then cpu_variant.
(s_arm_fpu): Merge *mcpu_ext_opt feature bits if any in cpu_variant.
* config/tc-arm.h (md_post_relax_hook): Set to arm_md_post_relax.
(aeabi_set_public_attributes): Delete external declaration.
(arm_md_post_relax): Declare externally.
=== Context ===
This patch is part of a patch series to add support for ARMv8-R
architecture. Its purpose is to distinguish for a CPU the feature bits
coming from its architecture from the feature bits coming from
extension(s) available in this CPU.
=== Motivation ===
This distinction is necessary to allow the Tag_CPU_arch build attribute
value to be exactly as per the architecture of the selected CPU. With
mixed architecture and extension feature bit, it is impossible to find
an architecture with an exact match of feature bit and the build
attribute value logic must then select the closest match which might not
be the right architecture.
=== Patch description ===
The patch creates a new field in the arm_cpus table to hold the feature
set for the extensions available in each CPU. The existing architecture
feature set is then updated to remove those feature bit. The patch also
takes advantage of all the lines being changed to reindent the whole
table.
Note: This patch *adds* a memory leak due to mcpu_cpu_opt sometimes
pointing to dynamically allocated feature bits which is never freeed.
The subsequent patch in the series solves this issue as well as a
preexisting identical issue in arm_parse_extension. The patches are kept
separate for ease of review since they are both big enough already.
2017-06-21 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (struct arm_cpu_option_table): New ext field.
(ARM_CPU_OPT): Add parameter to set new ext field and reorder canonical
name field just after the name field.
(arm_cpus): Move extension feature bit from value field to ext field,
reorder parameter according to changes in ARM_CPU_OPT and reindent.
(arm_parse_cpu): Point mcpu_cpu_opt to a bitfield merging the value and
ext field from the selected arm_cpus entry.
(s_arm_cpu): Likewise.
The commit
d309493 target: consider addressable unit size when reading/writing memory
introduced the possibility of reading memory of targets with
non-8-bit-bytes (e.g. memories that store 16 bits at each address).
The documentation of target_read and target_write was updated
accordingly, but to_xfer_partial, which is very related, wasn't updated.
This commit fixes that.
gdb/ChangeLog:
* target.h (struct target_ops) <to_xfer_partial>: Update doc to
talk about addressable units instead of bytes.
PR binutils/21640
* elf.c (setup_group): Zero the group section pointer list after
allocation so that loops can be caught. Check for NULL pointers
when processing a group list.
