This patch teaches GDB to support gnu vector in inferior calls. As a
result, fails in gdb.base/gnu_vector.exp are fixed. The calling
convention of gnu vector isn't documented in the AAPCS, because it
is the GCC extension. I checked the gcc/config/arm/arm.c, understand
how GCC pass arguments and return values, and do the same in GDB side.
The patch is tested with both hard float and soft float on arm-linux.
gdb:
2015-11-13 Yao Qi <yao.qi@linaro.org>
PR tdep/19051
* arm-tdep.c (arm_type_align): Return the right alignment
value for vector.
(arm_vfp_cprc_sub_candidate): Return true for 64-bit and
128-bit vector types.
(arm_return_in_memory): Handel vector type.
Current arm_return_in_memory isn't friendly to adding new things in it.
Moreover, a lot of stuff are about APCS, which is not used nowadays (AAPCS
is being used). This patch is to refactor arm_return_in_memory, so that
some code can be shared for both APCS and AAPCS at the beginning of
arm_return_in_memory, and then each ABI (APCS and AAPCS) are processed
separately.
gdb:
2015-11-13 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c (arm_return_in_memory): Rewrite it.
(arm_return_value): Call arm_return_in_memory for
TYPE_CODE_COMPLEX.
This patch removes the leftover of the d10v stuff in the testsuite
directory. The d10v port was removed in GDB 6.7, but I happen to see
that there are still some leftovers about d10v in testsuite.
gdb/testsuite:
2015-11-13 Yao Qi <yao.qi@linaro.org>
* gdb.base/call-sc.exp (test_scalar_returns): Remove the
comments about d10v.
(test_scalar_returns): Likewise.
* gdb.base/d10v.ld: Remove.
* gdb.base/overlays.exp: Remove the target triplet checking for
d10v-*-*.
* gdb.base/structs.exp (test_struct_returns): Remove the
comments about d10v.
(test_struct_calls): Likewise.
gdb.base/gnu_vector.c printf the vector and gdb.base/gnu_vector.exp
expects the output by gdb_test_multiple. Nowadays, the test doesn't
expect the output from inferior_spawn_id, which is wrong. Even we
change the test to expect from inferior_spawn_id for the inferior
output, it is still possible the inferior exit before tcl/expect gets
the inferior output. We see this fail on both s390x-linux and
ppc-linux on buildbot,
FAIL: gdb.base/gnu_vector.exp: verify vector return value (the program exited)
https://sourceware.org/ml/gdb-testers/2015-q4/msg04922.htmlhttps://sourceware.org/ml/gdb-testers/2015-q4/msg04952.html
In order to address these two shortcomings above in gnu_vector.exp,
this patch rewrites the test a little bit. Get rid of checking the
inferior output, and instead checking them by printing them. In this
way, the test can also be run on the target without inferior io
(gdb,noinferiorio is set in the board file).
gdb/testsuite:
2015-11-13 Yao Qi <yao.qi@linaro.org>
* gdb.base/gnu_vector.exp: Check the return value by "p res".
* gdb.base/gnu_vector.c: Don't include stdio.h.
(main): Don't print res and call add_some_intvecs.
This patch adds support to the AArch64 back-end for the Cortex-A35
processor, as recently announced by ARM. The ARM Cortex-A35 provides
full support for the ARMv8-A architecture, including the CRC extension,
with optional Advanced-SIMD and Floating-Point support. We therefore set
feature flags for this CPU to AARCH64_ARCH_V8 and AARCH64_FEATURE_CRC, in
the same fashion as Cortex-A53 and Cortex-A57.
Tested in a cross environment for AArch64 with no issues.
2015-11-11 Matthew Wahab <matthew.wahab@arm.com>
PR gas/19217
* config/tc-arm.c (move_or_literal_pool): Remove redundant feature
check. Fix some code formatting. Drop use of MOVT. Add some
comments.
2015-11-11 Matthew Wahab <matthew.wahab@arm.com>
PR gas/19217
* gas/arm/thumb2_ldr_immediate_armv6t2.d: Update expected output.
The assembly code for emitting the proper tracepointable instruction
was duplicated in many places. Keep it in one place, to reduce work
needed for new targets.
gdb/testsuite/ChangeLog:
* gdb.trace/change-loc.h: include "trace-common.h", remove SYMBOL
macro.
(func5): Removed.
(func4): Use FAST_TRACEPOINT_LABEL.
* gdb.trace/ftrace-lock.c: include "trace-common.h", remove SYMBOL
macro.
(func): Removed.
(thread_function): Use FAST_TRACEPOINT_LABEL.
* gdb.trace/ftrace.c: include "trace-common.h", remove SYMBOL macro.
(func): Remove.
(marker): Use FAST_TRACEPOINT_LABEL.
* gdb.trace/pendshr1.c: include "trace-common.h", remove SYMBOL macro.
(pendfunc1): Remove.
(pendfunc): Use FAST_TRACEPOINT_LABEL.
* gdb.trace/pendshr2.c: include "trace-common.h", remove SYMBOL macro.
(foo): Remove.
(pendfunc2): Use FAST_TRACEPOINT_LABEL.
* gdb.trace/trace-break.c: include "trace-common.h", remove SYMBOL
macro.
(func): Remove.
(marker): Use FAST_TRACEPOINT_LABEL.
* gdb.trace/trace-common.h: New header.
* gdb.trace/trace-condition.c: include "trace-common.h", remove SYMBOL
macro.
(func): Remove.
(marker): Use FAST_TRACEPOINT_LABEL.
* gdb.trace/trace-mt.c: include "trace-common.h", remove SYMBOL macro.
(func): Remove.
(thread_function): Use FAST_TRACEPOINT_LABEL.
These casts uses the typedef target type (long int *) instead of the
typedef name. This was a little mistake in one of the big C++ cast
patches.
gdb/ChangeLog:
* inf-ptrace.c (inf_ptrace_fetch_register): Change long int *
cast to PTRACE_TYPE_RET *.
(inf_ptrace_store_register): Likewise.
Switch to using 'add_info' function for creating basic info
sub-commands.
gdb/ChangeLog:
* avr-tdep.c (_initialize_avr_tdep): Switch to 'add_info' for creating
info sub-commands.
* gnu-nat.c (add_task_commands): Likewise.
* macrocmd.c (_initialize_macrocmd): Likewise.
The 'add_info' function is used for creating info commands, these
commands should be created as 'class_info' rather than 'no_class'.
gdb/ChangeLog:
* cli/cli-decode.c (add_info): Switch to class_info.
These variables were used in many gdb.trace tests. Keep them in one place,
to reduce work needed for new targets.
gdb/testsuite/ChangeLog:
* gdb.trace/backtrace.exp: Use global fpreg/spreg definition, add $
in front.
* gdb.trace/change-loc.exp: Use global pcreg definition.
* gdb.trace/collection.exp: Use global pcreg/fpreg/spreg definition.
* gdb.trace/entry-values.exp: Use global spreg definition, add $
in front.
* gdb.trace/mi-trace-frame-collected.exp: Use global pcreg definition.
* gdb.trace/pending.exp: Likewise.
* gdb.trace/report.exp: Use global pcreg/fpreg/spreg definition.
* gdb.trace/trace-break.exp: Likewise.
* gdb.trace/trace-condition.exp: Use global pcreg definition, add $
in front.
* gdb.trace/unavailable.exp: Use global pcreg/fpreg/spreg definition.
* gdb.trace/while-dyn.exp: Use global fpreg definition, add $
in front.
* lib/trace-support.exp: Define fpreg, spreg, pcreg variables.
Similar fix to "commit c316a17c40e44e8798b34ff84130904f2e7a53de".
* elf32-i386.c (elf_i386_relocate_section): Use read and write
pointers to reloc array, rather than memmove when deleting a
reloc. Don't use RELOC_AGAINST_DISCARDED_SECTION. Adjust
reloc counts at end of loop.
* elf64-x86-64.c (elf_x86_64_relocate_section): Likewise.
The idea here is that instead of using memmove to shuffle the relocs
array every time one is deleted, to add a "wrel" pointer and copy from
rel[0] to wrel[0] as we go.
* elf64-ppc.c (ppc64_elf_relocate_section): Use read and write
pointers to reloc array, rather than memmove when deleting a
reloc. Don't use RELOC_AGAINST_DISCARDED_SECTION. Adjust
reloc counts at end of loop.
* elf32-ppc.c (ppc_elf_relocate_section): Likewise.
Consider a function with the following signature...
function F (R : out Rec_Type) return Enum_Type;
... where Rec_Type is a simple record:
type Rec_Type is record
Cur : Integer;
end record;
Trying to "finish" from that function causes GDB to SEGV:
(gdb) fin
Run till exit from #0 bar.f (r=...) at bar.adb:5
0x00000000004022fe in foo () at foo.adb:5
5 I : Enum_Type := F (R);
[1] 18949 segmentation fault (core dumped) /[..]/gdb
This is related to the fact that funtion F has a parameter (R)
which is an "out" parameter being passed by copy. For those,
GNAT transforms the return value to be a record with multiple
fields: The first one is called "RETVAL" and contains the return
value shown in the source, and the remaining fields have the same
name as the "out" or "in out" parameters which are passed by copy.
So, in the example above, function F returns a struct that has
one field who name is "r".
Because "RETVAL" starts with "R", GDB thinks it's a wrapper field,
because it looks like the encoding used for variant records:
-- member_name ::= {choice} | others_choice
-- choice ::= simple_choice | range_choice
-- simple_choice ::= S number
-- range_choice ::= R number T number <<<<<----- here
-- number ::= {decimal_digit} [m]
-- others_choice ::= O (upper case letter O)
See ada_is_wrapper_field:
return (name != NULL
&& (startswith (name, "PARENT")
|| strcmp (name, "REP") == 0
|| startswith (name, "_parent")
|| name[0] == 'S' || name[0] == 'R' || name[0] == 'O'));
As a result of this, when trying to print the RETURN value,
we think that RETVAL is a wrapper, and thus recurse into
print_field_values...
if (ada_is_wrapper_field (type, i))
{
comma_needed =
print_field_values (TYPE_FIELD_TYPE (type, i),
valaddr,
(offset
+ TYPE_FIELD_BITPOS (type, i) / HOST_CHAR_BIT),
stream, recurse, val, options,
comma_needed, type, offset, language);
... which is a problem since print_field_values assumes that
the type it is given ("TYPE_FIELD_TYPE (type, i)" here), is also
a record type. However, that's not the case, since RETVAL is
an enum. That eventually leads GDB to a NULL type when trying to
extract fields out of the enum, which then leads to a SEGV when
trying to dereference it.
Ideally, we'd want to be a little more careful in identifying
wrapper fields, by enhancing ada_is_wrapper_field to be a little
more complete in its analysis of the field name before declaring
it a variant record wrapper. However, it's not super easy to do
so, considering that the choices can be combined together when
complex choices are used. Eg:
-- [...] the choice 1 .. 4 | 7 | -10 would be represented by
-- R1T4S7S10m
Given that we are working towards getting rid of GNAT encodings,
which means that the above will eventually disappear, we took
the more pragmatic approach is just treating RETVAL as a special
case.
gdb/ChangeLog:
* ada-lang.c (ada_is_wrapper_field): Add special handling
for fields called "RETVAL".
gdb/testsuite/ChangeLog:
* gdb.ada/fin_fun_out: New testcase.
This patch fixes all occurences of left-shifting negative constants in C code
which is undefined by the C standard.
binutils/ChangeLog:
* dwarf.c (read_leb128): Fix left shift of negative value.
This patch fixes all occurences of left-shifting negative constants in C code
which is undefined by the C standard.
bfd/ChangeLog:
* elf64-ppc.c (ppc64_elf_size_stubs, ppc64_elf_build_stubs): Fix left
shift of negative value.
* libbfd.c (safe_read_leb128): Likewise.
* dwarf2.c (place_sections): Likewise.
* bfd-in.h (align_power): Likewise.
* bfd-in2.h (align_power): Likewise.
We've already has the definition like this,
#define ELF_STRING_ARM_unwind ".ARM.exidx"
so it is better to use the macro rather than the string.
gdb:
2015-11-09 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c (arm_exidx_new_objfile): Use
ELF_STRING_ARM_unwind.
This patch adds a new function displaced_step_in_progress_thread,
which returns whether the thread is in progress of displaced
stepping.
gdb:
2015-11-09 Yao Qi <yao.qi@linaro.org>
* infrun.c (displaced_step_in_progress_thread): New function.
(handle_inferior_event_1): Call it.
Provides defines used to determine whether glibc obstacks are
compatible. Generally speaking, 32-bit targets won't need to use
obstack.o from libiberty if glibc is used, while 64-bit targets will,
until glibc gets the new obstack code.
libiberty/
* configure.ac: Get size of size_t.
* config.in: Regenerate.
* configure: Regenerate.
Fixes
warning: request for implicit conversion from ‘void *’ to ‘struct _obstack_chunk *’ not permitted in C++ [-Wc++-compat]
I moved the assignment to h->chunk to fix an overlong line, then
decided it would be better after the alloc failure check just to do
things the same way as in _obstack_newchunk.
* obstack.c (_obstack_newchunk): Silence -Wc++compat warning.
(_obstack_begin_worker): Likewise. Move assignment to h->chunk
after alloc failure check.
Using the standard gnulib obstack source requires importing quite a
lot of other files from gnulib, and requires build changes.
include/
PR gdb/17133
* obstack.h (__attribute_pure__): Expand _GL_ATTRIBUTE_PURE.
libiberty/
PR gdb/17133
* obstack.c (__alignof__): Expand alignof_type from alignof.h.
(obstack_exit_failure): Don't use exitfail.h.
(_): Include libintl.h when HAVE_LIBINTL_H and nls enabled.
Provide default. Don't include gettext.h.
(_Noreturn): Define.
* obstacks.texi: Adjust node references to external libc info files.
This copies obstack.[ch] from gnulib, and updates the docs. The next
patch should be applied if someone repeats the import at a later date.
include/
PR gdb/17133
* obstack.h: Import current gnulib file.
libiberty/
PR gdb/17133
* obstack.c: Import current gnulib file.
* obstacks.texi: Updated doc, from glibc's manual/memory.texi.
GDB Administrator
Cary Coutant
Yao Qi
Tristan Gingold
Marcus Shawcroft
James Greenhalgh
Ramana Radhakrishnan
Peter Bergner
Marcin Kościelnicki
Simon Marchi
Andrew Burgess
Jim Wilson
Nick Clifton
H.J. Lu
Mike Frysinger
Alan Modra
Vladimir Radosavljevic
Joel Brobecker
Dominik Vogt
Robert Suchanek
Kevin Buettner