This sets up the sim_state structure and the cpu member to match what we
do in most other sims, and what the common code suggests. This is a step
to unifying on the sim-cpu.o object.
On Windows, a recent gnulib update imported the lstat module, and
this caused a remote-sim.c build failure in struct host_callback_struct:
In file included from /[...]/gdb/remote-sim.c:34:0:
/[...]/gdb/../include/gdb/callback.h:93:9: error: duplicate member '_stati64'
int (*lstat) (host_callback *, const char *, struct stat *);
^
What happens it that gnulib's stat.h makes the following defines:
/* Large File Support on native Windows. */
#if 1
# define stat _stati64
#endif
and then:
#if 1
# if ! 0
/* mingw does not support symlinks, therefore it does not have lstat. But
without links, stat does just fine. */
# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
# define lstat stat
# endif
So, the following fields in struct host_callback_struct...
int (*stat) (host_callback *, const char *, struct stat *);
int (*fstat) (host_callback *, int, struct stat *);
int (*lstat) (host_callback *, const char *, struct stat *);
... get translated to...
int (*_stati64) (host_callback *, const char *, struct _stati64 *);
int (*_fstati64) (host_callback *, int, struct _stati64 *);
int (*_stati64) (host_callback *, const char *, struct _stati64 *);
... which causes two fields to have the same name.
This patch fixes the issue by renaming the stat-related fields
by adding a "to_" prefix, similar to what is done in GDB's
target_ops vector.
include/gdb/ChangeLog:
* callback.h (struct host_callback_struct) <to_stat>: Renamed
from "stat".
<to_fstat>: Renamed from "fstat".
<to_lstat>: Renamed from "lstat".
sim/common/ChangeLog:
* sim-io.c (sim_io_stat, sim_io_fstat): Adjust calls to "stat"
and "fstat" callbacks by calls to "to_stat" and "to_fstat" (resp)
callbacks following renaming in callback.h.
* syscall.c (cb_syscall): Likewise. Adjust calls to "lstat"
callback by call to "to_lstat" callback
sim/cris/ChangeLog:
* traps.c (cris_break_13_handler): Adjust call to "fstat" callback
by call to "to_fstat" following renaming in callback.h.
sim/h8300/ChangeLog:
* compile.c (sim_resume): Adjust calls to "stat" and "fstat"
callbacks by calls to "to_stat" and "to_fstat" (resp) callbacks
following renaming in callback.h.
Many of the simulators change the SIGINT handler.
E.g., moxie/interp.c:
sigsave = signal (SIGINT, interrupt);
However, this is unnecessary.
remote-sim.h already provides an API for asynchronously stopping
a sim; and both gdb and the drivers (run.c and nrun.c at least,
I didn't check the others) install a SIGINT handler which
calls this method.
URL: https://sourceware.org/bugzilla/show_bug.cgi?id=16450
Reported-by: Tom Tromey <tromey@redhat.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* wrapper.c: Include config.h before system header files.
* callback.c: Include config.h before system header files.
* cgen-trace.c: Likewise.
* cgen-utils.c: Likewise.
* gentmap.c: Likewise.
* sim-if.c: Include config.h before system header files.
* compile.c: Include config.h before system header files.
* sim-main.h: Likewise.
* gdb-if.c: Include config.h before system header files.
* load.c: Likewise.
* syscalls.c: Likewise.
* trace.c: Likewise.
* interp.c: Include config.h before system header files.
Since sim_do_command for many people simply calls sim_args_command, start
a unified version of it. For people who handle their own options, they
could switch to this by using sim_add_option_table instead.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
gdb/ChangeLog
* remote-sim.c (gdbsim_store_register): Update API to
sim_store_register to check more error conditions.
include/gdb/ChangeLog
* remote-sim.h (sim_store_register): Update the API
documentation for this function.
sim/erc32/ChangeLog
sim/h8300/ChangeLog
sim/m32c/ChangeLog
sim/mn10300/ChangeLog
sim/ppc/ChangeLog
sim/rx/ChangeLog
sim/v850/ChangeLog
* ???.c (sim_store_register): Update return value to
match new API.
As pointed out by Sandra Loosemore, a bunch of targets define sim_write
themselves instead of using the common/ code. So constify them too.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* compile.c(fetch_1): Fix pre-dec, pre-inc, post-dec and post-inc.
Index registers not masked memory areas.
Only simply increment or decrement.
* compile.c(store_1): Ditto.
2003-07-23 Richard Sandiford <rsandifo@redhat.com>
* compile.c (sim_resume): Make sure that dst.reg refers to the
right register byte in mova/sz.l @(dd,RnL),ERn.
2003-07-21 Richard Sandiford <rsandifo@redhat.com>
* compile.c (sim_resume): Zero-extend immediate to muls, mulsu,
mulxs, divs and divxs.
sim/testsuite/sim/h8300/ChangeLog:
2003-07-22 Michael Snyder <msnyder@redhat.com>
* mul.s: Don't try to use negative immediate (it's always
unsigned).
* div.s: Ditto.
* h8300/compile.c : Addition of extern variable h8300_normal_mode
(SP) : Handle normal mode
(bitfrom) : Use normal mode flag to return suitable value
(lvalue) : Use normal mode flag to return command line location
(decode) : Decode instruction correctly for normal mode
(init_pointers) : Initialise memory correctly for normal mode
(sim_resume) : Handle cases for normal mode using h8300_normal_mode flag
(sim_store_register) : Handle 2 byte PC for normal mode
(sim_fetch_register) : Handle 2 byte PC for normal mode
(set_h8300h) : Set normal mode flag as per architechture
(sim_load) : Allocate 64K for normal mode instead of bigger memory
* compile.c (decode): Enhancements for mova.
Initialize cst, reg, and rdisp inside the loop, for each
new instruction. Defer correction of the disp2 values until
later, and then adjust them by the size of the first operand,
rather than the size of the instruction.
(sim_resume): For mova, adjust the size of the second operand
according to the type of the first operand (INDEXB vs. INDEXW).
In cases where there is only one operand, the other two must
both be composed on the fly.
* compile.c: Replace "Hitachi" with "Renesas".
(decode): Distinguish AV_H8S from AV_H8H.
(sim_resume): H8SX can use any register for TAS.
(decode): Add support for VECIND.
(sim_resume): Implement rte/l and rts/l.
(GETSR): New macro (actually old macro reincarnated).
(decode): Add handling for IMM2.
(sim_resume): Drop extra block around jmp, jsr, rts.
Add handling for trapa and rte.
For divxu.b, change 0xffff mask to 0xff.
(set_h8300h): Add bfd_mach_h8300sxn machine.
* compile.c (sim_info): Fix typo in output.
* h8300/compile.c (set_h8300h): Replace 'flag' arguments
with a bfd_machine argument, and decode it inline.
Check for bfd_mach_h8300hn and bfd_mach_h8300sn.
2003-03-20 D.Venkatasubramanian <dvenkat@noida.hcltech.com>
* compile.c (cmdline_location): Added function to
return the location of 8-bit (256 locations) where the
Command Line arguments would be stored.
(decode): Added a TRAP to 0xcc for Commandline
processing using pseudo opcode O_SYS_CMDLINE.
(sim_resume): Added handling of O_SYS_CMDLINE Trap.
(sim_create_inferior): Setting a pointer to
Commandline Args array.
* inst.h: Added a new variable ptr_command_line for
storing pointer to Commandline array.
2003-03-14 D.Venkatasubramanian <dvenkat@noida.hcltech.com>
* compile.c (decode): Added code for some more magic traps.
* compile.c (sim_resume): Added support for File I/O system
calls through callback to host_system.
System calls provided support for :
open, read, write, lseek, close, stat, fstat
Only basic support for stat and fstat.
Mike Frysinger
Joel Brobecker
Nick Clifton
Andrew Burgess
Yoshinori Sato
Joel Sherrill
Daniel Jacobowitz
Alexandre Oliva
Michael Snyder
Dhananjay Deshpande
Shrinivas Atre
D.Venkatasubramanian
Andrew Cagney
Kazu Hirata
Andrey Volkov