(tmp-gencode, gencode.o, gencode): Delete targets.
(simops.h): New file.
($(BUILT_SRC_FROM_IGEN)): Do not depend on simops.h.
* gencode.c: Delete file.
* hw_htab.c (htab_map_binary): Don't try to map the text section
when it is empty.
* emul_chirp.c (map_over_chirp_note): Default load-base to -1 not
CHIRP_LOAD_BASE.
(emul_chirp_create): Map in the interrupt table.
* lib/sim-defs.exp (run_sim_test): Include a description such as
"assembling" or "linking" that identifies the phase a test fails
in, for easier analysis of failures.
* interp.c (sim_resume): New function from sim-resume.c, install
the stepping event after having processed the pending ticks.
(has_stepped): Likewise.
(sim_info): Produce an output only if verbose or STATE_VERBOSE_P.
pending interrupts.
* interrupts.c (interrupts_process): Keep track of the last number
of masked insn cycles.
(interrupts_initialize): Clear last number of masked insn cycles.
(interrupts_info): Report them.
(interrupts_update_pending): Compute clear and set masks of
interrupts and clear the interrupt bits before setting them
(due to SCI interrupt sharing).
* interrupts.h (struct interrupts): New members last_mask_cycles
and xirq_last_mask_cycles.
2001-04-18 matthew green <mrg@redhat.com>
* armcopro.c (write_cp15_reg): Set CHANGEMODE if endianness changes.
(read_cp15_reg): Make non-static.
(XScale_cp15_LDC): Update for write_cp15_reg() change.
(XScale_cp15_MCR): Likewise.
(XScale_cp15_write_reg): Likewise.
(XScale_check_memacc): New function. Check for breakpoints being
activated by memory accesses. Does not support the Branch Target
Buffer.
(XScale_set_fsr_far): New function. Set FSR and FAR for XScale.
(XScale_debug_moe): New function. Set the debug Method Of Entry,
if configured.
(write_cp14_reg): Reset count counter if requested.
* armdefs.h (struct ARMul_State): New members `LastTime' and
`CP14R0_CCD' used for the timer/counters.
(ARMul_CP13_R0_FIQ, ARMul_CP13_R0_IRQ, ARMul_CP13_R8_PMUS,
ARMul_CP14_R0_ENABLE, ARMul_CP14_R0_CLKRST, ARMul_CP14_R0_CCD,
ARMul_CP14_R0_INTEN0, ARMul_CP14_R0_INTEN1, ARMul_CP14_R0_INTEN2,
ARMul_CP14_R0_FLAG0, ARMul_CP14_R0_FLAG1, ARMul_CP14_R0_FLAG2,
ARMul_CP14_R10_MOE_IB, ARMul_CP14_R10_MOE_DB, ARMul_CP14_R10_MOE_BT,
ARMul_CP15_R1_ENDIAN, ARMul_CP15_R1_ALIGN, ARMul_CP15_R5_X,
ARMul_CP15_R5_ST_ALIGN, ARMul_CP15_R5_IMPRE, ARMul_CP15_R5_MMU_EXCPT,
ARMul_CP15_DBCON_M, ARMul_CP15_DBCON_E1, ARMul_CP15_DBCON_E0): New
defines for XScale registers.
(XScale_check_memacc, XScale_set_fsr_far, XScale_debug_moe): Prototype.
(ARMul_Emulate32, ARMul_Emulate26): Clean up function definition.
(ARMul_Emulate32): Handle the clock counter and hardware instruction
breakpoints. Call XScale_set_fsr_far() for software breakpoints and
software interrupts.
(LoadMult): Call XScale_set_fsr_far() for data aborts.
(LoadSMult): Likewise.
(StoreMult): Likewise.
(StoreSMult): Likewise.
* armemu.h (write_cp15_reg): Update prototype.
* arminit.c (ARMul_NewState): Initialise CP14R0_CCD and LastTime.
(ARMul_Abort): If XScale, check for FIQ and IRQ being enabled in CP13
register 0.
* armvirt.c (GetWord): Call XScale_check_memacc().
(PutWord): Likewise.
PENDING_FILL. Use PENDING_SCHED directly to handle the pending
set of the FCSR.
* sim-main.h (COCIDX): Remove definition; this isn't supported by
PENDING_FILL, and you can get the intended effect gracefully by
calling PENDING_SCHED directly.
2001-03-16 Frank Ch. Eigler <fche@redhat.com>
Add support for mmap-based memory regions.
* sim-memopt.c (mmap_next_fd): New global.
(sim_memory_init): Reinitialize it.
(OPTION_MEMORY_MAPFILE, memory_option_handler): Support new
"--memory-mapfile FILE" option. Check for some errors.
(do_memopt_add): Conditionally do mmap instead of malloc for
backing store of simulated memory. Check for more errors.
(do_simopt_delete, sim_memory_uninstall): Corresponding cleanup.
* sim-memopt.h (munmap_length): New member of _sim_memopt.
* configure.in: Look for mmap/fstat related functions and headers.
* config.in, configure: Regenerated.
2001-02-09 Ben Elliston <bje@redhat.com>
* (profile_print_pc): Write header out in target byte order.
2001-02-09 Ben Elliston <bje@redhat.com>
* sim-profile.c (profile_pc_init): Correct bug in loop logic when
adjusting the pc shift value.
Andrew Cagney