This commit:
commit 3922b30264
Author: Pedro Alves <palves@redhat.com>
AuthorDate: Thu Jun 18 21:28:37 2020 +0100
Decouple inferior_ptid/inferior_thread(); dup ptids in thread list (PR 25412)
caused a regression for gdb.gdb/unittest.exp when GDB is configured
with --enable-targets=all. The failure is:
gdb/thread.c:95: internal-error: thread_info* inferior_thread(): Assertion `current_thread_ != nullptr' failed.
The problem is in this line in regcache.c:cooked_read_test:
/* Switch to the mock thread. */
scoped_restore restore_inferior_ptid
= make_scoped_restore (&inferior_ptid, mock_ptid);
Both gdbarch-selftest.c and regcache.c set up a similar mock context,
but the series the patch above belongs to only updated the
gdbarch-selftest.c context to not write to inferior_ptid directly, and
missed updating regcache.c's.
Instead of copying the fix over to regcache.c, share the mock context
setup code in a new RAII class, based on gdbarch-selftest.c's version.
Also remove the "target already pushed" error from regcache.c, like it
had been removed from gdbarch-selftest.c in the multi-target series.
That check is unnecessary because each inferior now has its own target
stack, and the unit test pushes a target on a separate (mock)
inferior, not the current inferior on entry.
gdb/ChangeLog:
2020-06-23 Pedro Alves <palves@redhat.com>
* gdbarch-selftests.c: Don't include inferior.h, gdbthread.h or
progspace-and-thread.h. Include scoped-mock-context.h instead.
(register_to_value_test): Use scoped_mock_context.
* regcache.c: Include "scoped-mock-context.h".
(cooked_read_test): Don't error out if a target is already pushed.
Use scoped_mock_context. Adjust.
* scoped-mock-context.h: New file.
Remove `TYPE_NAME`, changing all the call sites to use `type::name`
directly. This is quite a big diff, but this was mostly done using sed
and coccinelle. A few call sites were done by hand.
gdb/ChangeLog:
* gdbtypes.h (TYPE_NAME): Remove. Change all cal sites to use
type::name instead.
Remove TYPE_CODE, changing all the call sites to use type::code
directly. This is quite a big diff, but this was mostly done using sed
and coccinelle. A few call sites were done by hand.
gdb/ChangeLog:
* gdbtypes.h (TYPE_CODE): Remove. Change all call sites to use
type::code instead.
It possible that a thread whose PC we attempt to read is already dead.
In this case, 'regcache_read_pc' errors out. This impacts the
"proceed" execution flow, where GDB quits early before having a chance
to check if there exists a pending event. To remedy, keep going with
a 0 value for the PC if 'regcache_read_pc' fails. Because the value
of PC before resuming a thread is mostly used for storing and checking
the next time the thread stops, this tolerance is expected to be
harmless for a dead thread/process.
gdb/ChangeLog:
2020-05-14 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* regcache.c (regcache_read_pc_protected): New function
implementation that returns 0 if the PC cannot read via
'regcache_read_pc'.
* infrun.c (proceed): Call 'regcache_read_pc_protected'
instead of 'regcache_read_pc'.
(keep_going_pass_signal): Ditto.
gdbsupport/ChangeLog:
2020-05-14 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* common-regcache.h (regcache_read_pc_protected): New function
declaration.
This commit adds multi-target support to GDB. What this means is that
with this commit, GDB can now be connected to different targets at the
same time. E.g., you can debug a live native process and a core dump
at the same time, connect to multiple gdbservers, etc.
Actually, the word "target" is overloaded in gdb. We already have a
target stack, with pushes several target_ops instances on top of one
another. We also have "info target" already, which means something
completely different to what this patch does.
So from here on, I'll be using the "target connections" term, to mean
an open process_stratum target, pushed on a target stack. This patch
makes gdb have multiple target stacks, and multiple process_stratum
targets open simultaneously. The user-visible changes / commands will
also use this terminology, but of course it's all open to debate.
User-interface-wise, not that much changes. The main difference is
that each inferior may have its own target connection.
A target connection (e.g., a target extended-remote connection) may
support debugging multiple processes, just as before.
Say you're debugging against gdbserver in extended-remote mode, and
you do "add-inferior" to prepare to spawn a new process, like:
(gdb) target extended-remote :9999
...
(gdb) start
...
(gdb) add-inferior
Added inferior 2
(gdb) inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) file a.out
...
(gdb) start
...
At this point, you have two inferiors connected to the same gdbserver.
With this commit, GDB will maintain a target stack per inferior,
instead of a global target stack.
To preserve the behavior above, by default, "add-inferior" makes the
new inferior inherit a copy of the target stack of the current
inferior. Same across a fork - the child inherits a copy of the
target stack of the parent. While the target stacks are copied, the
targets themselves are not. Instead, target_ops is made a
refcounted_object, which means that target_ops instances are
refcounted, which each inferior counting for a reference.
What if you want to create an inferior and connect it to some _other_
target? For that, this commit introduces a new "add-inferior
-no-connection" option that makes the new inferior not share the
current inferior's target. So you could do:
(gdb) target extended-remote :9999
Remote debugging using :9999
...
(gdb) add-inferior -no-connection
[New inferior 2]
Added inferior 2
(gdb) inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) info inferiors
Num Description Executable
1 process 18401 target:/home/pedro/tmp/main
* 2 <null>
(gdb) tar extended-remote :10000
Remote debugging using :10000
...
(gdb) info inferiors
Num Description Executable
1 process 18401 target:/home/pedro/tmp/main
* 2 process 18450 target:/home/pedro/tmp/main
(gdb)
A following patch will extended "info inferiors" to include a column
indicating which connection an inferior is bound to, along with a
couple other UI tweaks.
Other than that, debugging is the same as before. Users interact with
inferiors and threads as before. The only difference is that
inferiors may be bound to processes running in different machines.
That's pretty much all there is to it in terms of noticeable UI
changes.
On to implementation.
Since we can be connected to different systems at the same time, a
ptid_t is no longer a unique identifier. Instead a thread can be
identified by a pair of ptid_t and 'process_stratum_target *', the
later being the instance of the process_stratum target that owns the
process/thread. Note that process_stratum_target inherits from
target_ops, and all process_stratum targets inherit from
process_stratum_target. In earlier patches, many places in gdb were
converted to refer to threads by thread_info pointer instead of
ptid_t, but there are still places in gdb where we start with a
pid/tid and need to find the corresponding inferior or thread_info
objects. So you'll see in the patch many places adding a
process_stratum_target parameter to functions that used to take only a
ptid_t.
Since each inferior has its own target stack now, we can always find
the process_stratum target for an inferior. That is done via a
inf->process_target() convenience method.
Since each inferior has its own target stack, we need to handle the
"beneath" calls when servicing target calls. The solution I settled
with is just to make sure to switch the current inferior to the
inferior you want before making a target call. Not relying on global
context is just not feasible in current GDB. Fortunately, there
aren't that many places that need to do that, because generally most
code that calls target methods already has the current context
pointing to the right inferior/thread. Note, to emphasize -- there's
no method to "switch to this target stack". Instead, you switch the
current inferior, and that implicitly switches the target stack.
In some spots, we need to iterate over all inferiors so that we reach
all target stacks.
Native targets are still singletons. There's always only a single
instance of such targets.
Remote targets however, we'll have one instance per remote connection.
The exec target is still a singleton. There's only one instance. I
did not see the point of instanciating more than one exec_target
object.
After vfork, we need to make sure to push the exec target on the new
inferior. See exec_on_vfork.
For type safety, functions that need a {target, ptid} pair to identify
a thread, take a process_stratum_target pointer for target parameter
instead of target_ops *. Some shared code in gdb/nat/ also need to
gain a target pointer parameter. This poses an issue, since gdbserver
doesn't have process_stratum_target, only target_ops. To fix this,
this commit renames gdbserver's target_ops to process_stratum_target.
I think this makes sense. There's no concept of target stack in
gdbserver, and gdbserver's target_ops really implements a
process_stratum-like target.
The thread and inferior iterator functions also gain
process_stratum_target parameters. These are used to be able to
iterate over threads and inferiors of a given target. Following usual
conventions, if the target pointer is null, then we iterate over
threads and inferiors of all targets.
I tried converting "add-inferior" to the gdb::option framework, as a
preparatory patch, but that stumbled on the fact that gdb::option does
not support file options yet, for "add-inferior -exec". I have a WIP
patchset that adds that, but it's not a trivial patch, mainly due to
need to integrate readline's filename completion, so I deferred that
to some other time.
In infrun.c/infcmd.c, the main change is that we need to poll events
out of all targets. See do_target_wait. Right after collecting an
event, we switch the current inferior to an inferior bound to the
target that reported the event, so that target methods can be used
while handling the event. This makes most of the code transparent to
multi-targets. See fetch_inferior_event.
infrun.c:stop_all_threads is interesting -- in this function we need
to stop all threads of all targets. What the function does is send an
asynchronous stop request to all threads, and then synchronously waits
for events, with target_wait, rinse repeat, until all it finds are
stopped threads. Now that we have multiple targets, it's not
efficient to synchronously block in target_wait waiting for events out
of one target. Instead, we implement a mini event loop, with
interruptible_select, select'ing on one file descriptor per target.
For this to work, we need to be able to ask the target for a waitable
file descriptor. Such file descriptors already exist, they are the
descriptors registered in the main event loop with add_file_handler,
inside the target_async implementations. This commit adds a new
target_async_wait_fd target method that just returns the file
descriptor in question. See wait_one / stop_all_threads in infrun.c.
The 'threads_executing' global is made a per-target variable. Since
it is only relevant to process_stratum_target targets, this is where
it is put, instead of in target_ops.
You'll notice that remote.c includes some FIXME notes. These refer to
the fact that the global arrays that hold data for the remote packets
supported are still globals. For example, if we connect to two
different servers/stubs, then each might support different remote
protocol features. They might even be different architectures, like
e.g., one ARM baremetal stub, and a x86 gdbserver, to debug a
host/controller scenario as a single program. That isn't going to
work correctly today, because of said globals. I'm leaving fixing
that for another pass, since it does not appear to be trivial, and I'd
rather land the base work first. It's already useful to be able to
debug multiple instances of the same server (e.g., a distributed
cluster, where you have full control over the servers installed), so I
think as is it's already reasonable incremental progress.
Current limitations:
- You can only resume more that one target at the same time if all
targets support asynchronous debugging, and support non-stop mode.
It should be possible to support mixed all-stop + non-stop
backends, but that is left for another time. This means that
currently in order to do multi-target with gdbserver you need to
issue "maint set target-non-stop on". I would like to make that
mode be the default, but we're not there yet. Note that I'm
talking about how the target backend works, only. User-visible
all-stop mode works just fine.
- As explained above, connecting to different remote servers at the
same time is likely to produce bad results if they don't support the
exact set of RSP features.
FreeBSD updates courtesy of John Baldwin.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
John Baldwin <jhb@FreeBSD.org>
* aarch64-linux-nat.c
(aarch64_linux_nat_target::thread_architecture): Adjust.
* ada-tasks.c (print_ada_task_info): Adjust find_thread_ptid call.
(task_command_1): Likewise.
* aix-thread.c (sync_threadlists, aix_thread_target::resume)
(aix_thread_target::wait, aix_thread_target::fetch_registers)
(aix_thread_target::store_registers)
(aix_thread_target::thread_alive): Adjust.
* amd64-fbsd-tdep.c: Include "inferior.h".
(amd64fbsd_get_thread_local_address): Pass down target.
* amd64-linux-nat.c (ps_get_thread_area): Use ps_prochandle
thread's gdbarch instead of target_gdbarch.
* break-catch-sig.c (signal_catchpoint_print_it): Adjust call to
get_last_target_status.
* break-catch-syscall.c (print_it_catch_syscall): Likewise.
* breakpoint.c (breakpoints_should_be_inserted_now): Consider all
inferiors.
(update_inserted_breakpoint_locations): Skip if inferiors with no
execution.
(update_global_location_list): When handling moribund locations,
find representative inferior for location's pspace, and use thread
count of its process_stratum target.
* bsd-kvm.c (bsd_kvm_target_open): Pass target down.
* bsd-uthread.c (bsd_uthread_target::wait): Use
as_process_stratum_target and adjust thread_change_ptid and
add_thread calls.
(bsd_uthread_target::update_thread_list): Use
as_process_stratum_target and adjust find_thread_ptid,
thread_change_ptid and add_thread calls.
* btrace.c (maint_btrace_packet_history_cmd): Adjust
find_thread_ptid call.
* corelow.c (add_to_thread_list): Adjust add_thread call.
(core_target_open): Adjust add_thread_silent and thread_count
calls.
(core_target::pid_to_str): Adjust find_inferior_ptid call.
* ctf.c (ctf_target_open): Adjust add_thread_silent call.
* event-top.c (async_disconnect): Pop targets from all inferiors.
* exec.c (add_target_sections): Push exec target on all inferiors
sharing the program space.
(remove_target_sections): Remove the exec target from all
inferiors sharing the program space.
(exec_on_vfork): New.
* exec.h (exec_on_vfork): Declare.
* fbsd-nat.c (fbsd_add_threads): Add fbsd_nat_target parameter.
Pass it down.
(fbsd_nat_target::update_thread_list): Adjust.
(fbsd_nat_target::resume): Adjust.
(fbsd_handle_debug_trap): Add fbsd_nat_target parameter. Pass it
down.
(fbsd_nat_target::wait, fbsd_nat_target::post_attach): Adjust.
* fbsd-tdep.c (fbsd_corefile_thread): Adjust
get_thread_arch_regcache call.
* fork-child.c (gdb_startup_inferior): Pass target down to
startup_inferior and set_executing.
* gdbthread.h (struct process_stratum_target): Forward declare.
(add_thread, add_thread_silent, add_thread_with_info)
(in_thread_list): Add process_stratum_target parameter.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(find_thread_ptid, thread_change_ptid): Add process_stratum_target
parameter.
(all_threads()): Delete overload.
(all_threads, all_non_exited_threads): Add process_stratum_target
parameter.
(all_threads_safe): Use brace initialization.
(thread_count): Add process_stratum_target parameter.
(set_resumed, set_running, set_stop_requested, set_executing)
(threads_are_executing, finish_thread_state): Add
process_stratum_target parameter.
(switch_to_thread): Use is_current_thread.
* i386-fbsd-tdep.c: Include "inferior.h".
(i386fbsd_get_thread_local_address): Pass down target.
* i386-linux-nat.c (i386_linux_nat_target::low_resume): Adjust.
* inf-child.c (inf_child_target::maybe_unpush_target): Remove
have_inferiors check.
* inf-ptrace.c (inf_ptrace_target::create_inferior)
(inf_ptrace_target::attach): Adjust.
* infcall.c (run_inferior_call): Adjust.
* infcmd.c (run_command_1): Pass target to
scoped_finish_thread_state.
(proceed_thread_callback): Skip inferiors with no execution.
(continue_command): Rename 'all_threads' local to avoid hiding
'all_threads' function. Adjust get_last_target_status call.
(prepare_one_step): Adjust set_running call.
(signal_command): Use user_visible_resume_target. Compare thread
pointers instead of inferior_ptid.
(info_program_command): Adjust to pass down target.
(attach_command): Mark target's 'thread_executing' flag.
(stop_current_target_threads_ns): New, factored out from ...
(interrupt_target_1): ... this. Switch inferior before making
target calls.
* inferior-iter.h
(struct all_inferiors_iterator, struct all_inferiors_range)
(struct all_inferiors_safe_range)
(struct all_non_exited_inferiors_range): Filter on
process_stratum_target too. Remove explicit.
* inferior.c (inferior::inferior): Push dummy target on target
stack.
(find_inferior_pid, find_inferior_ptid, number_of_live_inferiors):
Add process_stratum_target parameter, and pass it down.
(have_live_inferiors): Adjust.
(switch_to_inferior_and_push_target): New.
(add_inferior_command, clone_inferior_command): Handle
"-no-connection" parameter. Use
switch_to_inferior_and_push_target.
(_initialize_inferior): Mention "-no-connection" option in
the help of "add-inferior" and "clone-inferior" commands.
* inferior.h: Include "process-stratum-target.h".
(interrupt_target_1): Use bool.
(struct inferior) <push_target, unpush_target, target_is_pushed,
find_target_beneath, top_target, process_target, target_at,
m_stack>: New.
(discard_all_inferiors): Delete.
(find_inferior_pid, find_inferior_ptid, number_of_live_inferiors)
(all_inferiors, all_non_exited_inferiors): Add
process_stratum_target parameter.
* infrun.c: Include "gdb_select.h" and <unordered_map>.
(target_last_proc_target): New global.
(follow_fork_inferior): Push target on new inferior. Pass target
to add_thread_silent. Call exec_on_vfork. Handle target's
reference count.
(follow_fork): Adjust get_last_target_status call. Also consider
target.
(follow_exec): Push target on new inferior.
(struct execution_control_state) <target>: New field.
(user_visible_resume_target): New.
(do_target_resume): Call target_async.
(resume_1): Set target's threads_executing flag. Consider resume
target.
(commit_resume_all_targets): New.
(proceed): Also consider resume target. Skip threads of inferiors
with no execution. Commit resumtion in all targets.
(start_remote): Pass current inferior to wait_for_inferior.
(infrun_thread_stop_requested): Consider target as well. Pass
thread_info pointer to clear_inline_frame_state instead of ptid.
(infrun_thread_thread_exit): Consider target as well.
(random_pending_event_thread): New inferior parameter. Use it.
(do_target_wait): Rename to ...
(do_target_wait_1): ... this. Add inferior parameter, and pass it
down.
(threads_are_resumed_pending_p, do_target_wait): New.
(prepare_for_detach): Adjust calls.
(wait_for_inferior): New inferior parameter. Handle it. Use
do_target_wait_1 instead of do_target_wait.
(fetch_inferior_event): Adjust. Switch to representative
inferior. Pass target down.
(set_last_target_status): Add process_stratum_target parameter.
Save target in global.
(get_last_target_status): Add process_stratum_target parameter and
handle it.
(nullify_last_target_wait_ptid): Clear 'target_last_proc_target'.
(context_switch): Check inferior_ptid == null_ptid before calling
inferior_thread().
(get_inferior_stop_soon): Pass down target.
(wait_one): Rename to ...
(poll_one_curr_target): ... this.
(struct wait_one_event): New.
(wait_one): New.
(stop_all_threads): Adjust.
(handle_no_resumed, handle_inferior_event): Adjust to consider the
event's target.
(switch_back_to_stepped_thread): Also consider target.
(print_stop_event): Update.
(normal_stop): Update. Also consider the resume target.
* infrun.h (wait_for_inferior): Remove declaration.
(user_visible_resume_target): New declaration.
(get_last_target_status, set_last_target_status): New
process_stratum_target parameter.
* inline-frame.c (clear_inline_frame_state(ptid_t)): Add
process_stratum_target parameter, and use it.
(clear_inline_frame_state (thread_info*)): New.
* inline-frame.c (clear_inline_frame_state(ptid_t)): Add
process_stratum_target parameter.
(clear_inline_frame_state (thread_info*)): Declare.
* linux-fork.c (delete_checkpoint_command): Pass target down to
find_thread_ptid.
(checkpoint_command): Adjust.
* linux-nat.c (linux_nat_target::follow_fork): Switch to thread
instead of just tweaking inferior_ptid.
(linux_nat_switch_fork): Pass target down to thread_change_ptid.
(exit_lwp): Pass target down to find_thread_ptid.
(attach_proc_task_lwp_callback): Pass target down to
add_thread/set_running/set_executing.
(linux_nat_target::attach): Pass target down to
thread_change_ptid.
(get_detach_signal): Pass target down to find_thread_ptid.
Consider last target status's target.
(linux_resume_one_lwp_throw, resume_lwp)
(linux_handle_syscall_trap, linux_handle_extended_wait, wait_lwp)
(stop_wait_callback, save_stop_reason, linux_nat_filter_event)
(linux_nat_wait_1, resume_stopped_resumed_lwps): Pass target down.
(linux_nat_target::async_wait_fd): New.
(linux_nat_stop_lwp, linux_nat_target::thread_address_space): Pass
target down.
* linux-nat.h (linux_nat_target::async_wait_fd): Declare.
* linux-tdep.c (get_thread_arch_regcache): Pass target down.
* linux-thread-db.c (struct thread_db_info::process_target): New
field.
(add_thread_db_info): Save target.
(get_thread_db_info): New process_stratum_target parameter. Also
match target.
(delete_thread_db_info): New process_stratum_target parameter.
Also match target.
(thread_from_lwp): Adjust to pass down target.
(thread_db_notice_clone): Pass down target.
(check_thread_db_callback): Pass down target.
(try_thread_db_load_1): Always push the thread_db target.
(try_thread_db_load, record_thread): Pass target down.
(thread_db_target::detach): Pass target down. Always unpush the
thread_db target.
(thread_db_target::wait, thread_db_target::mourn_inferior): Pass
target down. Always unpush the thread_db target.
(find_new_threads_callback, thread_db_find_new_threads_2)
(thread_db_target::update_thread_list): Pass target down.
(thread_db_target::pid_to_str): Pass current inferior down.
(thread_db_target::get_thread_local_address): Pass target down.
(thread_db_target::resume, maintenance_check_libthread_db): Pass
target down.
* nto-procfs.c (nto_procfs_target::update_thread_list): Adjust.
* procfs.c (procfs_target::procfs_init_inferior): Declare.
(proc_set_current_signal, do_attach, procfs_target::wait): Adjust.
(procfs_init_inferior): Rename to ...
(procfs_target::procfs_init_inferior): ... this and adjust.
(procfs_target::create_inferior, procfs_notice_thread)
(procfs_do_thread_registers): Adjust.
* ppc-fbsd-tdep.c: Include "inferior.h".
(ppcfbsd_get_thread_local_address): Pass down target.
* proc-service.c (ps_xfer_memory): Switch current inferior and
program space as well.
(get_ps_regcache): Pass target down.
* process-stratum-target.c
(process_stratum_target::thread_address_space)
(process_stratum_target::thread_architecture): Pass target down.
* process-stratum-target.h
(process_stratum_target::threads_executing): New field.
(as_process_stratum_target): New.
* ravenscar-thread.c
(ravenscar_thread_target::update_inferior_ptid): Pass target down.
(ravenscar_thread_target::wait, ravenscar_add_thread): Pass target
down.
* record-btrace.c (record_btrace_target::info_record): Adjust.
(record_btrace_target::record_method)
(record_btrace_target::record_is_replaying)
(record_btrace_target::fetch_registers)
(get_thread_current_frame_id, record_btrace_target::resume)
(record_btrace_target::wait, record_btrace_target::stop): Pass
target down.
* record-full.c (record_full_wait_1): Switch to event thread.
Pass target down.
* regcache.c (regcache::regcache)
(get_thread_arch_aspace_regcache, get_thread_arch_regcache): Add
process_stratum_target parameter and handle it.
(current_thread_target): New global.
(get_thread_regcache): Add process_stratum_target parameter and
handle it. Switch inferior before calling target method.
(get_thread_regcache): Pass target down.
(get_thread_regcache_for_ptid): Pass target down.
(registers_changed_ptid): Add process_stratum_target parameter and
handle it.
(registers_changed_thread, registers_changed): Pass target down.
(test_get_thread_arch_aspace_regcache): New.
(current_regcache_test): Define a couple local test_target_ops
instances and use them for testing.
(readwrite_regcache): Pass process_stratum_target parameter.
(cooked_read_test, cooked_write_test): Pass mock_target down.
* regcache.h (get_thread_regcache, get_thread_arch_regcache)
(get_thread_arch_aspace_regcache): Add process_stratum_target
parameter.
(regcache::target): New method.
(regcache::regcache, regcache::get_thread_arch_aspace_regcache)
(regcache::registers_changed_ptid): Add process_stratum_target
parameter.
(regcache::m_target): New field.
(registers_changed_ptid): Add process_stratum_target parameter.
* remote.c (remote_state::supports_vCont_probed): New field.
(remote_target::async_wait_fd): New method.
(remote_unpush_and_throw): Add remote_target parameter.
(get_current_remote_target): Adjust.
(remote_target::remote_add_inferior): Push target.
(remote_target::remote_add_thread)
(remote_target::remote_notice_new_inferior)
(get_remote_thread_info): Pass target down.
(remote_target::update_thread_list): Skip threads of inferiors
bound to other targets. (remote_target::close): Don't discard
inferiors. (remote_target::add_current_inferior_and_thread)
(remote_target::process_initial_stop_replies)
(remote_target::start_remote)
(remote_target::remote_serial_quit_handler): Pass down target.
(remote_target::remote_unpush_target): New remote_target
parameter. Unpush the target from all inferiors.
(remote_target::remote_unpush_and_throw): New remote_target
parameter. Pass it down.
(remote_target::open_1): Check whether the current inferior has
execution instead of checking whether any inferior is live. Pass
target down.
(remote_target::remote_detach_1): Pass down target. Use
remote_unpush_target.
(extended_remote_target::attach): Pass down target.
(remote_target::remote_vcont_probe): Set supports_vCont_probed.
(remote_target::append_resumption): Pass down target.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc, remote_target::resume)
(remote_target::commit_resume): Pass down target.
(remote_target::remote_stop_ns): Check supports_vCont_probed.
(remote_target::interrupt_query)
(remote_target::remove_new_fork_children)
(remote_target::check_pending_events_prevent_wildcard_vcont)
(remote_target::remote_parse_stop_reply)
(remote_target::process_stop_reply): Pass down target.
(first_remote_resumed_thread): New remote_target parameter. Pass
it down.
(remote_target::wait_as): Pass down target.
(unpush_and_perror): New remote_target parameter. Pass it down.
(remote_target::readchar, remote_target::remote_serial_write)
(remote_target::getpkt_or_notif_sane_1)
(remote_target::kill_new_fork_children, remote_target::kill): Pass
down target.
(remote_target::mourn_inferior): Pass down target. Use
remote_unpush_target.
(remote_target::core_of_thread)
(remote_target::remote_btrace_maybe_reopen): Pass down target.
(remote_target::pid_to_exec_file)
(remote_target::thread_handle_to_thread_info): Pass down target.
(remote_target::async_wait_fd): New.
* riscv-fbsd-tdep.c: Include "inferior.h".
(riscv_fbsd_get_thread_local_address): Pass down target.
* sol2-tdep.c (sol2_core_pid_to_str): Pass down target.
* sol-thread.c (sol_thread_target::wait, ps_lgetregs, ps_lsetregs)
(ps_lgetfpregs, ps_lsetfpregs, sol_update_thread_list_callback):
Adjust.
* solib-spu.c (spu_skip_standalone_loader): Pass down target.
* solib-svr4.c (enable_break): Pass down target.
* spu-multiarch.c (parse_spufs_run): Pass down target.
* spu-tdep.c (spu2ppu_sniffer): Pass down target.
* target-delegates.c: Regenerate.
* target.c (g_target_stack): Delete.
(current_top_target): Return the current inferior's top target.
(target_has_execution_1): Refer to the passed-in inferior's top
target.
(target_supports_terminal_ours): Check whether the initial
inferior was already created.
(decref_target): New.
(target_stack::push): Incref/decref the target.
(push_target, push_target, unpush_target): Adjust.
(target_stack::unpush): Defref target.
(target_is_pushed): Return bool. Adjust to refer to the current
inferior's target stack.
(dispose_inferior): Delete, and inline parts ...
(target_preopen): ... here. Only dispose of the current inferior.
(target_detach): Hold strong target reference while detaching.
Pass target down.
(target_thread_name): Add assertion.
(target_resume): Pass down target.
(target_ops::beneath, find_target_at): Adjust to refer to the
current inferior's target stack.
(get_dummy_target): New.
(target_pass_ctrlc): Pass the Ctrl-C to the first inferior that
has a thread running.
(initialize_targets): Rename to ...
(_initialize_target): ... this.
* target.h: Include "gdbsupport/refcounted-object.h".
(struct target_ops): Inherit refcounted_object.
(target_ops::shortname, target_ops::longname): Make const.
(target_ops::async_wait_fd): New method.
(decref_target): Declare.
(struct target_ops_ref_policy): New.
(target_ops_ref): New typedef.
(get_dummy_target): Declare function.
(target_is_pushed): Return bool.
* thread-iter.c (all_matching_threads_iterator::m_inf_matches)
(all_matching_threads_iterator::all_matching_threads_iterator):
Handle filter target.
* thread-iter.h (struct all_matching_threads_iterator, struct
all_matching_threads_range, class all_non_exited_threads_range):
Filter by target too. Remove explicit.
* thread.c (threads_executing): Delete.
(inferior_thread): Pass down current inferior.
(clear_thread_inferior_resources): Pass down thread pointer
instead of ptid_t.
(add_thread_silent, add_thread_with_info, add_thread): Add
process_stratum_target parameter. Use it for thread and inferior
searches.
(is_current_thread): New.
(thread_info::deletable): Use it.
(find_thread_ptid, thread_count, in_thread_list)
(thread_change_ptid, set_resumed, set_running): New
process_stratum_target parameter. Pass it down.
(set_executing): New process_stratum_target parameter. Pass it
down. Adjust reference to 'threads_executing'.
(threads_are_executing): New process_stratum_target parameter.
Adjust reference to 'threads_executing'.
(set_stop_requested, finish_thread_state): New
process_stratum_target parameter. Pass it down.
(switch_to_thread): Also match inferior.
(switch_to_thread): New process_stratum_target parameter. Pass it
down.
(update_threads_executing): Reimplement.
* top.c (quit_force): Pop targets from all inferior.
(gdb_init): Don't call initialize_targets.
* windows-nat.c (windows_nat_target) <get_windows_debug_event>:
Declare.
(windows_add_thread, windows_delete_thread): Adjust.
(get_windows_debug_event): Rename to ...
(windows_nat_target::get_windows_debug_event): ... this. Adjust.
* tracefile-tfile.c (tfile_target_open): Pass down target.
* gdbsupport/common-gdbthread.h (struct process_stratum_target):
Forward declare.
(switch_to_thread): Add process_stratum_target parameter.
* mi/mi-interp.c (mi_on_resume_1): Add process_stratum_target
parameter. Use it.
(mi_on_resume): Pass target down.
* nat/fork-inferior.c (startup_inferior): Add
process_stratum_target parameter. Pass it down.
* nat/fork-inferior.h (startup_inferior): Add
process_stratum_target parameter.
* python/py-threadevent.c (py_get_event_thread): Pass target down.
gdb/gdbserver/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* fork-child.c (post_fork_inferior): Pass target down to
startup_inferior.
* inferiors.c (switch_to_thread): Add process_stratum_target
parameter.
* lynx-low.c (lynx_target_ops): Now a process_stratum_target.
* nto-low.c (nto_target_ops): Now a process_stratum_target.
* linux-low.c (linux_target_ops): Now a process_stratum_target.
* remote-utils.c (prepare_resume_reply): Pass the target to
switch_to_thread.
* target.c (the_target): Now a process_stratum_target.
(done_accessing_memory): Pass the target to switch_to_thread.
(set_target_ops): Ajust to use process_stratum_target.
* target.h (struct target_ops): Rename to ...
(struct process_stratum_target): ... this.
(the_target, set_target_ops): Adjust.
(prepare_to_access_memory): Adjust comment.
* win32-low.c (child_xfer_memory): Adjust to use
process_stratum_target.
(win32_target_ops): Now a process_stratum_target.
When running the regcache::cooked_read_test selftest in an all targets
build, I get the following internal error:
/home/simark/src/binutils-gdb/gdb/thread.c:95: internal-error: thread_info* inferior_thread(): Assertion `tp' failed.
The stack trace is the followiing:
#9 0x000055fe25584a52 in internal_error (file=0x55fe27a25fe0 "/home/simark/src/binutils-gdb/gdb/thread.c", line=95, fmt=0x55fe27a25c80 "%s: Assertion `%s' failed.")
at /home/simark/src/binutils-gdb/gdb/gdbsupport/errors.c:55
#10 0x000055fe260674bc in inferior_thread () at /home/simark/src/binutils-gdb/gdb/thread.c:95
#11 0x000055fe25c62f0f in get_current_regcache () at /home/simark/src/binutils-gdb/gdb/regcache.c:372
#12 0x000055fe2594fcf1 in current_options () at /home/simark/src/binutils-gdb/gdb/mep-tdep.c:873
#13 0x000055fe2594ff08 in mep_register_name (gdbarch=0x62100056f510, regnr=152) at /home/simark/src/binutils-gdb/gdb/mep-tdep.c:958
#14 0x000055fe25950112 in mep_register_reggroup_p (gdbarch=0x62100056f510, regnum=152, group=0x55fe2924d540 <save_group>) at /home/simark/src/binutils-gdb/gdb/mep-tdep.c:1029
#15 0x000055fe2555ad87 in gdbarch_register_reggroup_p (gdbarch=0x62100056f510, regnum=152, reggroup=0x55fe2924d540 <save_group>) at /home/simark/src/binutils-gdb/gdb/gdbarch.c:3622
#16 0x000055fe25c61d45 in reg_buffer::save(gdb::function_view<register_status (int, unsigned char*)>) (this=0x7ffc61a0ed90, cooked_read=...)
at /home/simark/src/binutils-gdb/gdb/regcache.c:247
#17 0x000055fe2552ac60 in readonly_detached_regcache::readonly_detached_regcache(gdbarch*, gdb::function_view<register_status (int, unsigned char*)>) (this=0x7ffc61a0ed90,
gdbarch=0x62100056f510, cooked_read=...) at /home/simark/src/binutils-gdb/gdb/regcache.h:444
#18 0x000055fe25c61867 in readonly_detached_regcache::readonly_detached_regcache (this=0x7ffc61a0ed90, src=...) at /home/simark/src/binutils-gdb/gdb/regcache.c:212
#19 0x000055fe25c6a5ca in selftests::cooked_read_test (gdbarch=0x62100056f510) at /home/simark/src/binutils-gdb/gdb/regcache.c:1613
The problems is that mep's code ends up calling inferior_thread, which
calls find_thread_ptid. find_thread_ptid searches for a thread by ptid
in the thread list of the inferior that is expected to contain that
thread.
However, the thread list of the mock inferior set up in cooked_read_test
is never initialized. So find_thread_ptid doesn't find the thread,
which is an unexpected situation for inferior_thread.
This is failing since this commit:
0803633106
Per-inferior thread list, thread ranges/iterators, down with ALL_THREADS, etc.
Fix it by putting the mock thread in the thread list of the mock
inferior in cooked_read_test.
gdb/ChangeLog:
* regcache.c (cooked_read_test): Initialize thread list of
mock_inferior.
With this patch, the help docs now respect 2 invariants:
* The first line of a command help is terminated by a '.' character.
* The last character of a command help is not a newline character.
Note that the changes for the last invariant were done by Tom, as part of :
[PATCH] Remove trailing newlines from help text
https://sourceware.org/ml/gdb-patches/2019-06/msg00050.html
but some occurrences have been re-introduced since then.
Some help docs had to be rephrased/restructured to respect the above
invariants.
Before this patch, print_doc_line was printing the first line
of a command help documentation, but stopping at the first '.'
or ',' character.
This was giving inconsistent results :
* The first line of command helps was sometimes '.' terminated,
sometimes not.
* The first line of command helps was not always designed to be
readable/understandable/unambiguous when stopping at the first
'.' or ',' character.
This e.g. created the following inconsistencies/problems:
< catch exception -- Catch Ada exceptions
< catch handlers -- Catch Ada exceptions
< catch syscall -- Catch system calls by their names
< down-silently -- Same as the `down' command
while the new help is:
> catch exception -- Catch Ada exceptions, when raised.
> catch handlers -- Catch Ada exceptions, when handled.
> catch syscall -- Catch system calls by their names, groups and/or numbers.
> down-silently -- Same as the `down' command, but does not print anything.
Also, the command help doc should not be terminated by a newline
character, but this was not respected by all commands.
The cli-option -OPT framework re-introduced some occurences.
So, the -OPT build help framework was changed to not output newlines at the
end of %OPTIONS% replacement.
This patch changes the help documentations to ensure the 2 invariants
given above.
It implied to slightly rephrase or restructure some help docs.
Based on the above invariants, print_doc_line (called by
'apropos' and 'help' commands to print the first line of a command
help) now outputs the full first line of a command help.
This all results in a lot of small changes in the produced help docs.
There are less code changes than changes in the help docs, as a lot
of docs are produced by some code (e.g. the remote packet usage settings).
gdb/ChangeLog
2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* cli/cli-decode.h (print_doc_line): Add for_value_prefix argument.
* cli/cli-decode.c (print_doc_line): Likewise. It now prints
the full first line, except when FOR_VALUE_PREFIX. In this case,
the trailing '.' is not output, and the first character is uppercased.
(print_help_for_command): Update call to print_doc_line.
(print_doc_of_command): Likewise.
* cli/cli-setshow.c (deprecated_show_value_hack): Likewise.
* cli/cli-option.c (append_indented_doc): Do not append newline.
(build_help_option): Append newline after first appended_indented_doc
only if a second call is done.
(build_help): Append 2 new lines before each option, except the first
one.
* compile/compile.c (_initialize_compile): Add new lines after
%OPTIONS%, when not at the end of the help.
Change help doc or code
producing the help doc to respect the invariants.
* maint-test-options.c (_initialize_maint_test_options): Likewise.
Also removed the new line after 'Options:', as all other commands
do not put an empty line between 'Options:' and the first option.
* printcmd.c (_initialize_printcmd): Likewise.
* stack.c (_initialize_stack): Likewise.
* interps.c (interpreter_exec_cmd): Fix "Usage:" line that was
incorrectly telling COMMAND is optional.
* ada-lang.c (_initialize_ada_language): Change help doc or code
producing the help doc to respect the invariants.
* ada-tasks.c (_initialize_ada_tasks): Likewise.
* breakpoint.c (_initialize_breakpoint): Likewise.
* cli/cli-cmds.c (_initialize_cli_cmds): Likewise.
* cli/cli-logging.c (_initialize_cli_logging): Likewise.
* cli/cli-setshow.c (_initialize_cli_setshow): Likewise.
* cli/cli-style.c (cli_style_option::add_setshow_commands,
_initialize_cli_style): Likewise.
* corelow.c (core_target_info): Likewise.
* dwarf-index-cache.c (_initialize_index_cache): Likewise.
* dwarf2read.c (_initialize_dwarf2_read): Likewise.
* filesystem.c (_initialize_filesystem): Likewise.
* frame.c (_initialize_frame): Likewise.
* gnu-nat.c (add_task_commands): Likewise.
* infcall.c (_initialize_infcall): Likewise.
* infcmd.c (_initialize_infcmd): Likewise.
* interps.c (_initialize_interpreter): Likewise.
* language.c (_initialize_language): Likewise.
* linux-fork.c (_initialize_linux_fork): Likewise.
* maint-test-settings.c (_initialize_maint_test_settings): Likewise.
* maint.c (_initialize_maint_cmds): Likewise.
* memattr.c (_initialize_mem): Likewise.
* printcmd.c (_initialize_printcmd): Likewise.
* python/lib/gdb/function/strfns.py (_MemEq, _StrLen, _StrEq,
_RegEx): Likewise.
* ravenscar-thread.c (_initialize_ravenscar): Likewise.
* record-btrace.c (_initialize_record_btrace): Likewise.
* record-full.c (_initialize_record_full): Likewise.
* record.c (_initialize_record): Likewise.
* regcache-dump.c (_initialize_regcache_dump): Likewise.
* regcache.c (_initialize_regcache): Likewise.
* remote.c (add_packet_config_cmd, init_remote_threadtests,
_initialize_remote): Likewise.
* ser-tcp.c (_initialize_ser_tcp): Likewise.
* serial.c (_initialize_serial): Likewise.
* skip.c (_initialize_step_skip): Likewise.
* source.c (_initialize_source): Likewise.
* stack.c (_initialize_stack): Likewise.
* symfile.c (_initialize_symfile): Likewise.
* symtab.c (_initialize_symtab): Likewise.
* target-descriptions.c (_initialize_target_descriptions): Likewise.
* top.c (init_main): Likewise.
* tracefile-tfile.c (tfile_target_info): Likewise.
* tracepoint.c (_initialize_tracepoint): Likewise.
* tui/tui-win.c (_initialize_tui_win): Likewise.
* utils.c (add_internal_problem_command): Likewise.
* valprint.c (value_print_option_defs): Likewise.
gdb/testsuite/ChangeLog
2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/style.exp: Update tests for help doc new invariants.
* gdb.base/help.exp: Likewise.
PR gdb/24653 points out that a gcc snapshot will complain about the
calls to alloca(0) in gdb.
These calls are only needed when using the C alloca. I'm inclined to
think that no current platform needs this, so this patch removes the
calls.
Let me know what you think.
gdb/ChangeLog
2019-06-14 Tom Tromey <tromey@adacore.com>
PR gdb/24653:
* regcache.c (registers_changed): Don't call alloca.
* top.c (execute_command): Don't call alloca.
This removes the regcache_invalidator class in favor of a scope_exit.
This seems like an improvement (albeit a minor one) because
regcache_invalidator is only used in a single spot.
gdb/ChangeLog:
2019-01-23 Tom Tromey <tom@tromey.com>
Pedro Alves <palves@redhat.com>
* regcache.c (class regcache_invalidator): Remove.
(regcache::raw_write): Use make_scope_exit.
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
Given that a target's stratum is a property of the type, and not of an
instance of the type, get rid of to_stratum data field and replace it
with a virtual method.
I.e., when we have e.g., 10 target remote instances active, there's no
need for each of the instances to have their own to_stratum copy.
gdb/ChangeLog:
2018-11-30 Pedro Alves <palves@redhat.com>
* aix-thread.c (aix_thread_target) <aix_thread_target>: Delete.
<stratum>: New override.
* bfd-target.c (aix_thread_target) <aix_thread_target>: Delete.
<stratum>: New override.
* bsd-uthread.c (bsd_uthread_target) <bsd_uthread_target>: Delete.
<stratum>: New override.
* exec.c (exec_target) <exec_target>: Delete.
<stratum>: New override.
* gdbarch-selftests.c (register_to_value_test): Adjust to use the
stratum method instead of the to_stratum field.
* linux-thread-db.c (thread_db_target) <thread_db_target>: Delete.
<stratum>: New override.
(thread_db_target::thread_db_target): Delete.
* make-target-delegates (print_class): Don't print a ctor
declaration. Print a stratum method override declaration.
* process-stratum-target.h (process_stratum_target)
<process_stratum_target>: Delete.
<stratum>: New override.
* ravenscar-thread.c (ravenscar_thread_target)
<ravenscar_thread_target>: Delete.
<stratum>: New override.
* record-btrace.c (record_btrace_target)
<record_btrace_target>: Delete.
<stratum>: New override.
* record-full.c (record_full_base_target)
<record_full_base_target>: Delete.
<stratum>: New override.
* record.c (record_disconnect, record_detach)
(record_mourn_inferior, record_kill): Adjust to use the stratum
method instead of the to_stratum field.
* regcache.c (cooked_read_test, cooked_write_test): Likewise.
* sol-thread.c (sol_thread_target)
<sol_thread_target>: Delete.
<stratum>: New override.
* spu-multiarch.c (spu_multiarch_target)
<spu_multiarch_target>: Delete.
<stratum>: New override.
* target-delegates.c: Regenerate.
* target.c (target_stack::push, target_stack::unpush)
(pop_all_targets_above, pop_all_targets_at_and_above)
(info_target_command, target_require_runnable)
(target_stack::find_beneath): Adjust to use the stratum method
instead of the to_stratum field.
(dummy_target::dummy_target): Delete.
(dummy_target::stratum): New.
(debug_target::debug_target): Delete.
(debug_target::stratum): New.
(maintenance_print_target_stack): Adjust to use the stratum method
instead of the to_stratum field.
* target.h (struct target_ops) <stratum>: New method.
<to_stratum>: Delete.
<is_pushed>: Adjust to use the stratum method
instead of the to_stratum field.
There's no need to have all target.h users seeing this type.
Also helps with a follow up patch.
gdb/ChangeLog:
2018-11-30 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_SFILES): Add test-target.c.
* gdbarch-selftests.c: Include "test-target.h".
* regcache.c: Include "test-target.h".
* target.c (test_target_info, test_target_ops::info): Move to ...
* test-target.c: ... this new file.
* target.h (test_target_ops): Move to ...
* test-target.h: ... this new file.
As preparation for multi-target, this patch makes each inferior have
its own thread list.
This isn't absolutely necessary for multi-target, but simplifies
things. It originally stemmed from the desire to eliminate the
init_thread_list calls sprinkled around, plus it makes it more
efficient to iterate over threads of a given inferior (no need to
always iterate over threads of all inferiors).
We still need to iterate over threads of all inferiors in a number of
places, which means we'd need adjust the ALL_THREADS /
ALL_NON_EXITED_THREADS macros. However, naively tweaking those macros
to have an extra for loop, like:
#define ALL_THREADS (thr, inf) \
for (inf = inferior_list; inf; inf = inf->next) \
for (thr = inf->thread_list; thr; thr = thr->next)
causes problems with code that does "break" or "continue" within the
ALL_THREADS loop body. Plus, we need to declare the extra "inf" local
variable in order to pass it as temporary variable to ALL_THREADS
(etc.)
It gets even trickier when we consider extending the macros to filter
out threads matching a ptid_t and a target. The macros become tricker
to read/write. Been there.
An alternative (which was my next attempt), is to replace the
ALL_THREADS etc. iteration style with for_each_all_threads,
for_each_non_exited_threads, etc. functions which would take a
callback as parameter, which would usually be passed a lambda.
However, I did not find that satisfactory at all, because the
resulting code ends up a little less natural / more noisy to read,
write and debug/step-through (due to use of lambdas), and in many
places where we use "continue;" to skip to the next thread now need to
use "return;". (I ran into hard to debug bugs caused by a
continue/return confusion.)
I.e., before:
ALL_NON_EXITED_THREADS (tp)
{
if (tp->not_what_I_want)
continue;
// do something
}
would turn into:
for_each_non_exited_thread ([&] (thread_info *tp)
{
if (tp->not_what_I_want)
return;
// do something
});
Lastly, the solution I settled with was to replace the ALL_THREADS /
ALL_NON_EXITED_THREADS / ALL_INFERIORS macros with (C++20-like) ranges
and iterators, such that you can instead naturaly iterate over
threads/inferiors using range-for, like e.g,.:
// all threads, including THREAD_EXITED threads.
for (thread_info *tp : all_threads ())
{ .... }
// all non-exited threads.
for (thread_info *tp : all_non_exited_threads ())
{ .... }
// all non-exited threads of INF inferior.
for (thread_info *tp : inf->non_exited_threads ())
{ .... }
The all_non_exited_threads() function takes an optional filter ptid_t as
parameter, which is quite convenient when we need to iterate over
threads matching that filter. See e.g., how the
set_executing/set_stop_requested/finish_thread_state etc. functions in
thread.c end up being simplified.
Most of the patch thus is about adding the infrustructure for allowing
the above. Later on when we get to actual multi-target, these
functions/ranges/iterators will gain a "target_ops *" parameter so
that e.g., we can iterate over all threads of a given target that
match a given filter ptid_t.
The only entry points users needs to be aware of are the
all_threads/all_non_exited_threads etc. functions seen above. Thus,
those functions are declared in gdbthread.h/inferior.h. The actual
iterators/ranges are mainly "internals" and thus are put out of view
in the new thread-iter.h/thread-iter.c/inferior-iter.h files. That
keeps the gdbthread.h/inferior.h headers quite a bit more readable.
A common/safe-iterator.h header is added which adds a template that
can be used to build "safe" iterators, which are forward iterators
that can be used to replace the ALL_THREADS_SAFE macro and other
instances of the same idiom in future.
There's a little bit of shuffling of code between
gdbthread.h/thread.c/inferior.h in the patch. That is necessary in
order to avoid circular dependencies between the
gdbthread.h/inferior.h headers.
As for the init_thread_list calls sprinkled around, they're all
eliminated by this patch, and a new, central call is added to
inferior_appeared. Note how also related to that, there's a call to
init_wait_for_inferior in remote.c that is eliminated.
init_wait_for_inferior is currently responsible for discarding skipped
inline frames, which had to be moved elsewhere. Given that nowadays
we always have a thread even for single-threaded processes, the
natural place is to delete a frame's inline frame info when we delete
the thread. I.e., from clear_thread_inferior_resources.
gdb/ChangeLog:
2018-11-22 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_SFILES): Add thread-iter.c.
* breakpoint.c (breakpoints_should_be_inserted_now): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
(print_one_breakpoint_location): Replace ALL_INFERIORS with
all_inferiors.
* bsd-kvm.c: Include inferior.h.
* btrace.c (btrace_free_objfile): Replace ALL_NON_EXITED_THREADS
with all_non_exited_threads.
* common/filtered-iterator.h: New.
* common/safe-iterator.h: New.
* corelow.c (core_target_open): Don't call init_thread_list here.
* darwin-nat.c (thread_info_from_private_thread_info): Replace
ALL_THREADS with all_threads.
* fbsd-nat.c (fbsd_nat_target::resume): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fbsd-tdep.c (fbsd_make_corefile_notes): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fork-child.c (postfork_hook): Don't call init_thread_list here.
* gdbarch-selftests.c (register_to_value_test): Adjust.
* gdbthread.h: Don't include "inferior.h" here.
(struct inferior): Forward declare.
(enum step_over_calls_kind): Moved here from inferior.h.
(thread_info::deletable): Definition moved to thread.c.
(find_thread_ptid (inferior *, ptid_t)): Declare.
(ALL_THREADS, ALL_THREADS_BY_INFERIOR, ALL_THREADS_SAFE): Delete.
Include "thread-iter.h".
(all_threads, all_non_exited_threads, all_threads_safe): New.
(any_thread_p): Declare.
(thread_list): Delete.
* infcmd.c (signal_command): Replace ALL_NON_EXITED_THREADS with
all_non_exited_threads.
(proceed_after_attach_callback): Delete.
(proceed_after_attach): Take an inferior pointer instead of an
integer PID. Adjust to use range-for.
(attach_post_wait): Pass down inferior pointer instead of pid.
Use range-for instead of ALL_NON_EXITED_THREADS.
(detach_command): Remove init_thread_list call.
* inferior-iter.h: New.
* inferior.c (struct delete_thread_of_inferior_arg): Delete.
(delete_thread_of_inferior): Delete.
(delete_inferior, exit_inferior_1): Use range-for with
inf->threads_safe() instead of iterate_over_threads.
(inferior_appeared): Call init_thread_list here.
(discard_all_inferiors): Use all_non_exited_inferiors.
(find_inferior_id, find_inferior_pid): Use all_inferiors.
(iterate_over_inferiors): Use all_inferiors_safe.
(have_inferiors, number_of_live_inferiors): Use
all_non_exited_inferiors.
(number_of_inferiors): Use all_inferiors and std::distance.
(print_inferior): Use all_inferiors.
* inferior.h: Include gdbthread.h.
(enum step_over_calls_kind): Moved to gdbthread.h.
(struct inferior) <thread_list>: New field.
<threads, non_exited_threads, threads_safe>: New methods.
(ALL_INFERIORS): Delete.
Include "inferior-iter.h".
(ALL_NON_EXITED_INFERIORS): Delete.
(all_inferiors_safe, all_inferiors, all_non_exited_inferiors): New
functions.
* inflow.c (child_interrupt, child_pass_ctrlc): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
* infrun.c (follow_exec): Use all_threads_safe.
(clear_proceed_status, proceed): Use all_non_exited_threads.
(init_wait_for_inferior): Don't clear inline frame state here.
(infrun_thread_stop_requested, for_each_just_stopped_thread): Use
all_threads instead of ALL_NON_EXITED_THREADS.
(random_pending_event_thread): Use all_non_exited_threads instead
of ALL_NON_EXITED_THREADS. Use a lambda for repeated code.
(clean_up_just_stopped_threads_fsms): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(handle_no_resumed): Use all_non_exited_threads instead of
ALL_NON_EXITED_THREADS. Use all_inferiors instead of
ALL_INFERIORS.
(restart_threads, switch_back_to_stepped_thread): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-nat.c (check_zombie_leaders): Replace ALL_INFERIORS with
all_inferiors.
(kill_unfollowed_fork_children): Use inf->non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* linux-tdep.c (linux_make_corefile_notes): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-thread-db.c (thread_db_target::update_thread_list):
Replace ALL_INFERIORS with all_inferiors.
(thread_db_target::thread_handle_to_thread_info): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* mi/mi-interp.c (multiple_inferiors_p): New.
(mi_on_resume_1): Simplify using all_non_exited_threads and
multiple_inferiors_p.
* mi/mi-main.c (mi_cmd_thread_list_ids): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* nto-procfs.c (nto_procfs_target::open): Don't call
init_thread_list here.
* record-btrace.c (record_btrace_target_open)
(record_btrace_target::stop_recording)
(record_btrace_target::close)
(record_btrace_target::record_is_replaying)
(record_btrace_target::resume, record_btrace_target::wait)
(record_btrace_target::record_stop_replaying): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* record-full.c (record_full_wait_1): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* regcache.c (cooked_read_test): Remove reference to global
thread_list.
* remote-sim.c (gdbsim_target::create_inferior): Don't call
init_thread_list here.
* remote.c (remote_target::update_thread_list): Use
all_threads_safe instead of ALL_NON_EXITED_THREADS.
(remote_target::process_initial_stop_replies): Replace
ALL_INFERIORS with all_non_exited_inferiors and use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
(remote_target::open_1): Don't call init_thread_list here.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::commit_resume)
(remote_target::remove_new_fork_children): Replace ALL_INFERIORS
with all_non_exited_inferiors and use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::kill_new_fork_children): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Remove
init_thread_list and init_wait_for_inferior calls.
(remote_target::remote_btrace_maybe_reopen)
(remote_target::thread_handle_to_thread_info): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* target.c (target_terminal::restore_inferior)
(target_terminal_is_ours_kind): Replace ALL_INFERIORS with
all_non_exited_inferiors.
* thread-iter.c: New file.
* thread-iter.h: New file.
* thread.c: Include "inline-frame.h".
(thread_list): Delete.
(clear_thread_inferior_resources): Call clear_inline_frame_state.
(init_thread_list): Use all_threads_safe instead of
ALL_THREADS_SAFE. Adjust to per-inferior thread lists.
(new_thread): Adjust to per-inferior thread lists.
(add_thread_silent): Pass inferior to find_thread_ptid.
(thread_info::deletable): New, moved from the header.
(delete_thread_1): Adjust to per-inferior thread lists.
(find_thread_global_id): Use inf->threads().
(find_thread_ptid): Use find_inferior_ptid and pass inferior to
find_thread_ptid.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(iterate_over_threads): Use all_threads_safe.
(any_thread_p): New.
(thread_count): Use all_threads and std::distance.
(live_threads_count): Use all_non_exited_threads and
std::distance.
(valid_global_thread_id): Use all_threads.
(in_thread_list): Use find_thread_ptid.
(first_thread_of_inferior): Adjust to per-inferior thread lists.
(any_thread_of_inferior, any_live_thread_of_inferior): Use
inf->non_exited_threads().
(prune_threads, delete_exited_threads): Use all_threads_safe.
(thread_change_ptid): Pass inferior pointer to find_thread_ptid.
(set_resumed, set_running): Use all_non_exited_threads.
(is_thread_state, is_stopped, is_exited, is_running)
(is_executing): Delete.
(set_executing, set_stop_requested, finish_thread_state): Use
all_non_exited_threads.
(print_thread_info_1): Use all_inferiors and all_threads.
(thread_apply_all_command): Use all_non_exited_threads.
(thread_find_command): Use all_threads.
(update_threads_executing): Use all_non_exited_threads.
* tid-parse.c (parse_thread_id): Use inf->threads.
* x86-bsd-nat.c (x86bsd_dr_set): Use inf->non_exited_threads ().
The problem was discussed and approved in
https://sourceware.org/ml/gdb-patches/2018-10/msg00514.html
2018-10-23 Hafiz Abid Qadeer <abidh@codesourcery.com>
* regcache.c (cooked_read_test): Add CSKY to the list of
architectures with a save_reggroup
This fixes all the straightforward -Wshadow=local warnings in gdb. A
few standard approaches are used here:
* Renaming an inner (or outer, but more commonly inner) variable;
* Lowering a declaration to avoid a clash;
* Moving a declaration into a more inner scope to avoid a clash,
including the special case of moving a declaration into a loop header.
I did not consider any of the changes in this patch to be particularly
noteworthy, though of course they should all still be examined.
gdb/ChangeLog
2018-10-04 Tom Tromey <tom@tromey.com>
* ctf.c (SET_ARRAY_FIELD): Rename "u32".
* p-valprint.c (pascal_val_print): Split inner "i" variable.
* xtensa-tdep.c (xtensa_push_dummy_call): Declare "i" in loop
header.
* xstormy16-tdep.c (xstormy16_push_dummy_call): Declare "val" in
more inner scope.
* xcoffread.c (read_xcoff_symtab): Rename inner "symbol".
* varobj.c (varobj_update): Rename inner "newobj",
"type_changed".
* valprint.c (generic_emit_char): Rename inner "buf".
* valops.c (find_overload_match): Rename inner "temp".
(value_struct_elt_for_reference): Declare "v" in more inner
scope.
* v850-tdep.c (v850_push_dummy_call): Rename "len".
* unittests/array-view-selftests.c (run_tests): Rename inner
"vec".
* tui/tui-stack.c (tui_show_frame_info): Declare "i" in loop
header.
* tracepoint.c (merge_uploaded_trace_state_variables): Declare
"tsv" in more inner scope.
(print_one_static_tracepoint_marker): Rename inner
"tuple_emitter".
* tic6x-tdep.c (tic6x_analyze_prologue): Declare "inst" lower.
(tic6x_push_dummy_call): Don't redeclare "addr".
* target-float.c: Declare "dto" lower.
* symtab.c (lookup_local_symbol): Rename inner "sym".
(find_pc_sect_line): Rename inner "pc".
* stack.c (print_frame): Don't redeclare "gdbarch".
(return_command): Rename inner "gdbarch".
* s390-tdep.c (s390_prologue_frame_unwind_cache): Renam inner
"sp".
* rust-lang.c (rust_internal_print_type): Declare "i" in loop
header.
* rs6000-tdep.c (ppc_process_record): Rename inner "addr".
* riscv-tdep.c (riscv_push_dummy_call): Declare "info" in inner
scope.
* remote.c (remote_target::update_thread_list): Don't redeclare
"tp".
(remote_target::process_initial_stop_replies): Rename inner
"thread".
(remote_target::remote_parse_stop_reply): Don't redeclare "p".
(remote_target::wait_as): Don't redeclare "stop_reply".
(remote_target::get_thread_local_address): Rename inner
"result".
(remote_target::get_tib_address): Likewise.
This avoids assert failures when the register is bigger than the
slot size. This happens on Aarch64 when truncating Z registers
into an fpsimd structure. This can be triggered by running
gdb command "generate-core-file".
Also, when the register is smaller then the slot size, then
zero pad when writing to the slot, and truncate when writing
to the regcache. This happens on Aarch64 with the CPSR register.
Continue to ensure registers are invalidated when both buffers
are null.
gdb/
* regcache.c (readable_regcache::read_part): Fix asserts.
(reg_buffer::raw_collect_part): New function.
(regcache::write_part): Fix asserts.
(reg_buffer::raw_supply_part): New function.
(regcache::transfer_regset_register): New helper function.
(regcache::transfer_regset): Call new functions.
(regcache_supply_regset): Use gdb_byte*.
(regcache::supply_regset): Likewise.
(regcache_collect_regset): Likewise.
(regcache::collect_regset): Likewise.
* regcache.h (reg_buffer::raw_collect_part): New declaration.
(reg_buffer::raw_supply_part): Likewise.
(regcache::transfer_regset_register): Likewise.
(regcache::transfer_regset): Use gdb_byte*.
This is more preparation bits for multi-target support.
In a multi-target scenario, we need to address the case of different
processes/threads running on different targets that happen to have the
same PID/PTID. E.g., we can have both process 123 in target 1, and
process 123 in target 2, while they're in reality different processes
running on different machines. Or maybe we've loaded multiple
instances of the same core file. Etc.
To address this, in my WIP multi-target branch, threads and processes
are uniquely identified by the (process_stratum target_ops *, ptid_t)
and (process_stratum target_ops *, pid) tuples respectively. I.e.,
each process_stratum instance has its own thread/process number space.
As you can imagine, that requires passing around target_ops * pointers
in a number of functions where we're currently passing only a ptid_t
or an int. E.g., when we look up a thread_info object by ptid_t in
find_thread_ptid, the ptid_t alone isn't sufficient.
In many cases though, we already have the thread_info or inferior
pointer handy, but we "lose" it somewhere along the call stack, only
to look it up again by ptid_t/pid. Since thread_info or inferior
objects know their parent target, if we pass around thread_info or
inferior pointers when possible, we avoid having to add extra
target_ops parameters to many functions, and also, we eliminate a
number of by ptid_t/int lookups.
So that's what this patch does. In a bit more detail:
- Changes a number of functions and methods to take a thread_info or
inferior pointer instead of a ptid_t or int parameter.
- Changes a number of structure fields from ptid_t/int to inferior or
thread_info pointers.
- Uses the inferior_thread() function whenever possible instead of
inferior_ptid.
- Uses thread_info pointers directly when possible instead of the
is_running/is_stopped etc. routines that require a lookup.
- A number of functions are eliminated along the way, such as:
int valid_gdb_inferior_id (int num);
int pid_to_gdb_inferior_id (int pid);
int gdb_inferior_id_to_pid (int num);
int in_inferior_list (int pid);
- A few structures and places hold a thread_info pointer across
inferior execution, so now they take a strong reference to the
(refcounted) thread_info object to avoid the thread_info pointer
getting stale. This is done in enable_thread_stack_temporaries and
in the infcall.c code.
- Related, there's a spot in infcall.c where using a RAII object to
handle the refcount would be handy, so a gdb::ref_ptr specialization
for thread_info is added (thread_info_ref, in gdbthread.h), along
with a gdb_ref_ptr policy that works for all refcounted_object types
(in common/refcounted-object.h).
gdb/ChangeLog:
2018-06-21 Pedro Alves <palves@redhat.com>
* ada-lang.h (ada_get_task_number): Take a thread_info pointer
instead of a ptid_t. All callers adjusted.
* ada-tasks.c (ada_get_task_number): Likewise. All callers
adjusted.
(print_ada_task_info, display_current_task_id, task_command_1):
Adjust.
* breakpoint.c (watchpoint_in_thread_scope): Adjust to use
inferior_thread.
(breakpoint_kind): Adjust.
(remove_breakpoints_pid): Rename to ...
(remove_breakpoints_inf): ... this. Adjust to take an inferior
pointer. All callers adjusted.
(bpstat_clear_actions): Use inferior_thread.
(get_bpstat_thread): New.
(bpstat_do_actions): Use it.
(bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust
to take a thread_info pointer. All callers adjusted.
(set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint)
(breakpoint_re_set_thread): Use inferior_thread.
* breakpoint.h (struct inferior): Forward declare.
(bpstat_stop_status): Update.
(remove_breakpoints_pid): Delete.
(remove_breakpoints_inf): New.
* bsd-uthread.c (bsd_uthread_target::wait)
(bsd_uthread_target::update_thread_list): Use find_thread_ptid.
* btrace.c (btrace_add_pc, btrace_enable, btrace_fetch)
(maint_btrace_packet_history_cmd)
(maint_btrace_clear_packet_history_cmd): Adjust.
(maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use
inferior_thread.
* cli/cli-interp.c: Include "inferior.h".
* common/refcounted-object.h (struct
refcounted_object_ref_policy): New.
* compile/compile-object-load.c: Include gdbthread.h.
(store_regs): Use inferior_thread.
* corelow.c (core_target::close): Use current_inferior.
(core_target_open): Adjust to use first_thread_of_inferior and use
the current inferior.
* ctf.c (ctf_target::close): Adjust to use current_inferior.
* dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ...
<thread>: ... this new field. All references adjusted.
(dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor):
Take a thread_info pointer instead of a ptid_t.
* dummy-frame.h (dummy_frame_push, dummy_frame_pop)
(dummy_frame_discard, register_dummy_frame_dtor): Take a
thread_info pointer instead of a ptid_t.
* elfread.c: Include "inferior.h".
(elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop):
Use inferior_thread.
* eval.c (evaluate_subexp): Likewise.
* frame.c (frame_pop, has_stack_frames, find_frame_sal): Use
inferior_thread.
* gdb_proc_service.h (struct thread_info): Forward declare.
(struct ps_prochandle) <ptid>: Delete, replaced by ...
<thread>: ... this new field. All references adjusted.
* gdbarch.h, gdbarch.c: Regenerate.
* gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a
'thread' parameter. All implementations and callers adjusted.
* gdbthread.h (thread_info) <set_running>: New method.
(delete_thread, delete_thread_silent): Take a thread_info pointer
instead of a ptid.
(global_thread_id_to_ptid, ptid_to_global_thread_id): Delete.
(first_thread_of_process): Delete, replaced by ...
(first_thread_of_inferior): ... this new function. All callers
adjusted.
(any_live_thread_of_process): Delete, replaced by ...
(any_live_thread_of_inferior): ... this new function. All callers
adjusted.
(switch_to_thread, switch_to_no_thread): Declare.
(is_executing): Delete.
(enable_thread_stack_temporaries): Update comment.
<enable_thread_stack_temporaries>: Take a thread_info pointer
instead of a ptid_t. Incref the thread.
<~enable_thread_stack_temporaries>: Decref the thread.
<m_ptid>: Delete
<m_thr>: New.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(get_last_thread_stack_temporary)
(value_in_thread_stack_temporaries, can_access_registers_thread):
Take a thread_info pointer instead of a ptid_t. All callers
adjusted.
* infcall.c (get_call_return_value): Use inferior_thread.
(run_inferior_call): Work with thread pointers instead of ptid_t.
(call_function_by_hand_dummy): Work with thread pointers instead
of ptid_t. Use thread_info_ref.
* infcmd.c (proceed_thread_callback): Access thread's state
directly.
(ensure_valid_thread, ensure_not_running): Use inferior_thread,
access thread's state directly.
(continue_command): Use inferior_thread.
(info_program_command): Use find_thread_ptid and access thread
state directly.
(proceed_after_attach_callback): Use thread state directly.
(notice_new_inferior): Take a thread_info pointer instead of a
ptid_t. All callers adjusted.
(exit_inferior): Take an inferior pointer instead of a pid. All
callers adjusted.
(exit_inferior_silent): New.
(detach_inferior): Delete.
(valid_gdb_inferior_id, pid_to_gdb_inferior_id)
(gdb_inferior_id_to_pid, in_inferior_list): Delete.
(detach_inferior_command, kill_inferior_command): Use
find_inferior_id instead of valid_gdb_inferior_id and
gdb_inferior_id_to_pid.
(inferior_command): Use inferior and thread pointers.
* inferior.h (struct thread_info): Forward declare.
(notice_new_inferior): Take a thread_info pointer instead of a
ptid_t. All callers adjusted.
(detach_inferior): Delete declaration.
(exit_inferior, exit_inferior_silent): Take an inferior pointer
instead of a pid. All callers adjusted.
(gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list)
(valid_gdb_inferior_id): Delete.
* infrun.c (follow_fork_inferior, proceed_after_vfork_done)
(handle_vfork_child_exec_or_exit, follow_exec): Adjust.
(struct displaced_step_inferior_state) <pid>: Delete, replaced by
...
<inf>: ... this new field.
<step_ptid>: Delete, replaced by ...
<step_thread>: ... this new field.
(get_displaced_stepping_state): Take an inferior pointer instead
of a pid. All callers adjusted.
(displaced_step_in_progress_any_inferior): Adjust.
(displaced_step_in_progress_thread): Take a thread pointer instead
of a ptid_t. All callers adjusted.
(displaced_step_in_progress, add_displaced_stepping_state): Take
an inferior pointer instead of a pid. All callers adjusted.
(get_displaced_step_closure_by_addr): Adjust.
(remove_displaced_stepping_state): Take an inferior pointer
instead of a pid. All callers adjusted.
(displaced_step_prepare_throw, displaced_step_prepare)
(displaced_step_fixup): Take a thread pointer instead of a ptid_t.
All callers adjusted.
(start_step_over): Adjust.
(infrun_thread_ptid_changed): Remove bit updating ptids in the
displaced step queue.
(do_target_resume): Adjust.
(fetch_inferior_event): Use inferior_thread.
(context_switch, get_inferior_stop_soon): Take an
execution_control_state pointer instead of a ptid_t. All callers
adjusted.
(switch_to_thread_cleanup): Delete.
(stop_all_threads): Use scoped_restore_current_thread.
* inline-frame.c: Include "gdbthread.h".
(inline_state) <inline_state>: Take a thread pointer instead of a
ptid_t. All callers adjusted.
<ptid>: Delete, replaced by ...
<thread>: ... this new field.
(find_inline_frame_state): Take a thread pointer instead of a
ptid_t. All callers adjusted.
(skip_inline_frames, step_into_inline_frame)
(inline_skipped_frames, inline_skipped_symbol): Take a thread
pointer instead of a ptid_t. All callers adjusted.
* inline-frame.h (skip_inline_frames, step_into_inline_frame)
(inline_skipped_frames, inline_skipped_symbol): Likewise.
* linux-fork.c (delete_checkpoint_command): Adjust to use thread
pointers directly.
* linux-nat.c (get_detach_signal): Likewise.
* linux-thread-db.c (thread_from_lwp): New 'stopped' parameter.
(thread_db_notice_clone): Adjust.
(thread_db_find_new_threads_silently)
(thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take
a thread pointer instead of a ptid_t. All callers adjusted.
* mi/mi-cmd-var.c: Include "inferior.h".
(mi_cmd_var_update_iter): Update to use thread pointers.
* mi/mi-interp.c (mi_new_thread): Update to use the thread's
inferior directly.
(mi_output_running_pid, mi_inferior_count): Delete, bits factored
out to ...
(mi_output_running): ... this new function.
(mi_on_resume_1): Adjust to use it.
(mi_user_selected_context_changed): Adjust to use inferior_thread.
* mi/mi-main.c (proceed_thread): Adjust to use thread pointers
directly.
(interrupt_thread_callback): : Adjust to use thread and inferior
pointers.
* proc-service.c: Include "gdbthread.h".
(ps_pglobal_lookup): Adjust to use the thread's inferior directly.
* progspace-and-thread.c: Include "inferior.h".
* progspace.c: Include "inferior.h".
* python/py-exitedevent.c (create_exited_event_object): Adjust to
hold a reference to an inferior_object.
* python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use
inferior_thread.
* python/py-inferior.c (struct inferior_object): Give the type a
tag name instead of a typedef.
(python_on_normal_stop): No need to check if the current thread is
listed.
(inferior_to_inferior_object): Change return type to
inferior_object. All callers adjusted.
(find_thread_object): Delete, bits factored out to ...
(thread_to_thread_object): ... this new function.
* python/py-infthread.c (create_thread_object): Use
inferior_to_inferior_object.
(thpy_is_stopped): Use thread pointer directly.
(gdbpy_selected_thread): Use inferior_thread.
* python/py-record-btrace.c (btpy_list_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(btpy_insn_or_gap_new): Drop const.
(btpy_list_new): Take a thread pointer instead of a ptid_t. All
callers adjusted.
* python/py-record.c: Include "gdbthread.h".
(recpy_insn_new, recpy_func_new): Take a thread pointer instead of
a ptid_t. All callers adjusted.
(gdbpy_current_recording): Use inferior_thread.
* python/py-record.h (recpy_record_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(recpy_element_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(recpy_insn_new, recpy_func_new): Take a thread pointer instead of
a ptid_t. All callers adjusted.
* python/py-threadevent.c: Include "gdbthread.h".
(get_event_thread): Use thread_to_thread_object.
* python/python-internal.h (struct inferior_object): Forward
declare.
(find_thread_object, find_inferior_object): Delete declarations.
(thread_to_thread_object, inferior_to_inferior_object): New
declarations.
* record-btrace.c: Include "inferior.h".
(require_btrace_thread): Use inferior_thread.
(record_btrace_frame_sniffer)
(record_btrace_tailcall_frame_sniffer): Use inferior_thread.
(get_thread_current_frame): Use scoped_restore_current_thread and
switch_to_thread.
(get_thread_current_frame): Use thread pointer directly.
(record_btrace_replay_at_breakpoint): Use thread's inferior
pointer directly.
* record-full.c: Include "inferior.h".
* regcache.c: Include "gdbthread.h".
(get_thread_arch_regcache): Use the inferior's address space
directly.
(get_thread_regcache, registers_changed_thread): New.
* regcache.h (get_thread_regcache(thread_info *thread)): New
overload.
(registers_changed_thread): New.
(remote_target) <remote_detach_1>: Swap order of parameters.
(remote_add_thread): <remote_add_thread>: Return the new thread.
(get_remote_thread_info(ptid_t)): New overload.
(remote_target::remote_notice_new_inferior): Use thread pointers
directly.
(remote_target::process_initial_stop_replies): Use
thread_info::set_running.
(remote_target::remote_detach_1, remote_target::detach)
(extended_remote_target::detach): Adjust.
* stack.c (frame_show_address): Use inferior_thread.
* target-debug.h (target_debug_print_thread_info_pp): New.
* target-delegates.c: Regenerate.
* target.c (default_thread_address_space): Delete.
(memory_xfer_partial_1): Use current_inferior.
(target_detach): Use current_inferior.
(target_thread_address_space): Delete.
(generic_mourn_inferior): Use current_inferior.
* target.h (struct target_ops) <thread_address_space>: Delete.
(target_thread_address_space): Delete.
* thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread
pointers directly.
(delete_thread_1, delete_thread, delete_thread_silent): Take a
thread pointer instead of a ptid_t. Adjust all callers.
(ptid_to_global_thread_id, global_thread_id_to_ptid): Delete.
(first_thread_of_process): Delete, replaced by ...
(first_thread_of_inferior): ... this new function. All callers
adjusted.
(any_thread_of_process): Rename to ...
(any_thread_of_inferior): ... this, and take an inferior pointer.
(any_live_thread_of_process): Rename to ...
(any_live_thread_of_inferior): ... this, and take an inferior
pointer.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(value_in_thread_stack_temporaries)
(get_last_thread_stack_temporary): Take a thread pointer instead
of a ptid_t. Adjust all callers.
(thread_info::set_running): New.
(validate_registers_access): Use inferior_thread.
(can_access_registers_ptid): Rename to ...
(can_access_registers_thread): ... this, and take a thread
pointer.
(print_thread_info_1): Adjust to compare thread pointers instead
of ptids.
(switch_to_no_thread, switch_to_thread): Make extern.
(scoped_restore_current_thread::~scoped_restore_current_thread):
Use m_thread pointer directly.
(scoped_restore_current_thread::scoped_restore_current_thread):
Use inferior_thread.
(thread_command): Use thread pointer directly.
(thread_num_make_value_helper): Use inferior_thread.
* top.c (execute_command): Use inferior_thread.
* tui/tui-interp.c: Include "inferior.h".
* varobj.c (varobj_create): Use inferior_thread.
(value_of_root_1): Use find_thread_global_id instead of
global_thread_id_to_ptid.
regcache_cooked_read_ftype can be converted to a function_view, which
allows us to use lambda functions and therefore avoid having to pass an
opaque pointer parameter.
Adjusting the fallouts showed that the "const regcache &" passed to the
readonly_detached_regcache constructor is cast to non-const in
do_cooked_read. I changed the constructor parameter to be non-const.
Finally, I renamed the typedef from regcache_cooked_read_ftype to
register_read_ftype, since there is nothing that forces us to use it
only for regcaches nor cooked registers.
gdb/ChangeLog:
* regcache.h (regcache_cooked_read_ftype): Rename to...
(register_read_ftype): ...this, change type to function_view.
(class reg_buffer) <save>: Remove src parameter.
(readonly_detached_regcache) <readonly_detached_regcache>: Make
parameter non-const in first overload. Remove src parameter in
second overload.
* regcache.c (do_cooked_read): Remove.
(readonly_detached_regcache::readonly_detached_regcache): Make
parameter non-const, adjust call to other constructor.
(reg_buffer::save): Remove src parameter.
* frame.c (do_frame_register_read): Remove.
(frame_save_as_regcache): Use lambda function.
* ppc-linux-tdep.c (ppu2spu_unwind_register): Change type of src
parameter to ppu2spu_data *.
(ppu2spu_sniffer): Use lambda function.
A purely virtual class containing functions from gdb/regcache.h
Both the gdb regcache structures and gdbserver regcache inherit
directly from reg_buffer_common. This will allow for common
functions which require the use of a regcache.
gdb/
* common/common-regcache.h (reg_buffer_common): New structure.
* regcache.c (reg_buffer::invalidate): Move from detached_regcache.
(reg_buffer::raw_supply): Likewise.
(reg_buffer::raw_supply_integer): Likewise.
(reg_buffer::raw_supply_zeroed): Likewise.
(reg_buffer::raw_collect): Likewise.
(reg_buffer::raw_collect_integer): Likewise.
* regcache.h (reg_buffer::invalidate): Move from detached_regcache.
(reg_buffer::raw_supply): Likewise.
(reg_buffer::raw_supply_integer): Likewise.
(reg_buffer::raw_supply_zeroed): Likewise.
(reg_buffer::raw_collect): Likewise.
(reg_buffer::raw_collect_integer): Likewise.
gdbserver/
* regcache.c (new_register_cache): Use new.
(free_register_cache): Use delete.
(register_data): Use const.
(supply_register): Move body inside regcache.
(regcache::raw_supply): New override function.
(collect_register): Move body inside regcache.
(regcache::raw_collect): New override function.
(regcache::get_register_status): New override function.
* regcache.h (struct regcache): Inherit from reg_buffer_common.
Using std::unique_ptr allows to remove the manual xfree in the
destructor.
If I understand correctly, using the () after the new operator will make
sure the allocated objects will be value initialized, which for scalars
means they are zero-initialized. So it should have the same behavior as
XCNEWVEC.
gdb/ChangeLog:
* regcache.h (reg_buffer) <~reg_buffer>: Use default destructor.
<m_registers, m_register_status>: Change type to
std::unique_ptr.
* regcache.c (reg_buffer::reg_buffer): Use new instead of
XCNEWVEC.
The type of reg_buffer::m_register_status is an array of signed char,
probably to ensure that each element takes up only one byte. Instead,
since we use C++11, we can force the underlying type of register_status
to be signed char and use the enum type.
gdb/ChangeLog:
* common/common-regcache.h (enum register_status): Add
underlying type "signed char".
* regcache.h (reg_buffer) <m_register_status>: Change type to
register_status *.
* regcache.c (reg_buffer::reg_buffer): Alocate arrays of
register_status instead of signed char.
(reg_buffer::save): Use REG_UNKNOWN instead of 0.
(reg_buffer::get_register_status): Remove cast.
(readable_regcache::raw_read): Remove cast.
(readable_regcache::cooked_read): Remove cast.
The recent C++ification of target_ops replaced references to the old
"current_target" squashed target throughout with references to a
"target_stack" pointer. I had picked the "target_stack" name very
early in the multi-target work, and managed to stick with it, even
though it's a bit of a misnomer, since it isn't really a "target
stack" object, but a pointer into the current top target in the stack.
As I'm splitting more pieces off of the multi-target branch, I've come
to think that it's better to rename it now. A following patch will
introduce a new class to represent a target stack, and "target_stack"
would be _its_ ideal name. (In the branch, the class is called
a_target_stack to work around the clash.)
Thus this commit renames target_stack to current_top_target and
replaces all references throughout. Also, while at it,
current_top_target is made a function instead of a pointer, to make it
possible to change its internal implementation without leaking
implementation details out. In a couple patches, the implementation
of the function will change to refer to a target stack object, and
then further down the multi-target work, it'll change again to find
the right target stack for the current inferior.
gdb/ChangeLog:
2018-06-07 Pedro Alves <palves@redhat.com>
* target.h (target_stack): Delete.
(current_top_target): Declare function.
* target.c (target_stack): Delete.
(g_current_top_target): New.
(current_top_target): New function.
* auxv.c: Use current_top_target instead of target_stack
throughout.
* avr-tdep.c: Likewise.
* breakpoint.c: Likewise.
* corefile.c: Likewise.
* elfread.c: Likewise.
* eval.c: Likewise.
* exceptions.c: Likewise.
* frame.c: Likewise.
* gdbarch-selftests.c: Likewise.
* gnu-v3-abi.c: Likewise.
* ia64-tdep.c: Likewise.
* ia64-vms-tdep.c: Likewise.
* infcall.c: Likewise.
* infcmd.c: Likewise.
* infrun.c: Likewise.
* linespec.c: Likewise.
* linux-tdep.c: Likewise.
* minsyms.c: Likewise.
* ppc-linux-nat.c: Likewise.
* ppc-linux-tdep.c: Likewise.
* procfs.c: Likewise.
* regcache.c: Likewise.
* remote.c: Likewise.
* rs6000-tdep.c: Likewise.
* s390-linux-nat.c: Likewise.
* s390-tdep.c: Likewise.
* solib-aix.c: Likewise.
* solib-darwin.c: Likewise.
* solib-dsbt.c: Likewise.
* solib-spu.c: Likewise.
* solib-svr4.c: Likewise.
* solib-target.c: Likewise.
* sparc-tdep.c: Likewise.
* sparc64-tdep.c: Likewise.
* spu-tdep.c: Likewise.
* symfile.c: Likewise.
* symtab.c: Likewise.
* target-descriptions.c: Likewise.
* target-memory.c: Likewise.
* target.c: Likewise.
* target.h: Likewise.
* tracefile-tfile.c: Likewise.
* tracepoint.c: Likewise.
* valops.c: Likewise.
* valprint.c: Likewise.
* value.c: Likewise.
* windows-tdep.c: Likewise.
* mi/mi-main.c: Likewise.
Remove regcache_raw_write, update all callers to use regcache::raw_write
instead.
gdb/ChangeLog:
* regcache.h (regcache_raw_write): Remove, update callers to use
regcache::raw_write instead.
* regcache.c (regcache_raw_write): Remove.
Remove regcache_raw_read, update all callers to use
readable_regcache::raw_read instead.
gdb/ChangeLog:
* regcache.h (regcache_raw_read): Remove, update callers to use
readable_regcache::raw_read instead.
* regcache.c (regcache_raw_read): Remove.
I.e., use C++ virtual methods and inheritance instead of tables of
function pointers.
Unfortunately, there's no way to do a smooth transition. ALL native
targets in the tree must be converted at the same time. I've tested
all I could with cross compilers and with help from GCC compile farm,
but naturally I haven't been able to test many of the ports. Still, I
made a best effort to port everything over, and while I expect some
build problems due to typos and such, which should be trivial to fix,
I don't expect any design problems.
* Implementation notes:
- The flattened current_target is gone. References to current_target
or current_target.beneath are replaced with references to
target_stack (the top of the stack) directly.
- To keep "set debug target" working, this adds a new debug_stratum
layer that sits on top of the stack, prints the debug, and delegates
to the target beneath.
In addition, this makes the shortname and longname properties of
target_ops be virtual methods instead of data fields, and makes the
debug target defer those to the target beneath. This is so that
debug code sprinkled around that does "if (debugtarget) ..." can
transparently print the name of the target beneath.
A patch later in the series actually splits out the
shortname/longname methods to a separate structure, but I preferred
to keep that chance separate as it is associated with changing a bit
the design of how targets are registered and open.
- Since you can't check whether a C++ virtual method is overridden,
the old method of checking whether a target_ops implements a method
by comparing the function pointer must be replaced with something
else.
Some cases are fixed by adding a parallel "can_do_foo" target_ops
methods. E.g.,:
+ for (t = target_stack; t != NULL; t = t->beneath)
{
- if (t->to_create_inferior != NULL)
+ if (t->can_create_inferior ())
break;
}
Others are fixed by changing void return type to bool or int return
type, and have the default implementation return false or -1, to
indicate lack of support.
- make-target-delegates was adjusted to generate C++ classes and
methods.
It needed tweaks to grok "virtual" in front of the target method
name, and for the fact that methods are no longer function pointers.
(In particular, the current code parsing the return type was simple
because it could simply parse up until the '(' in '(*to_foo)'.
It now generates a couple C++ classes that inherit target_ops:
dummy_target and debug_target.
Since we need to generate the class declarations as well, i.e., we
need to emit methods twice, we now generate the code in two passes.
- The core_target global is renamed to avoid conflict with the
"core_target" class.
- ctf/tfile targets
init_tracefile_ops is replaced by a base class that is inherited by
both ctf and tfile.
- bsd-uthread
The bsd_uthread_ops_hack hack is gone. It's not needed because
nothing was extending a target created by bsd_uthread_target.
- remote/extended-remote targets
This is a first pass, just enough to C++ify target_ops.
A later pass will convert more free functions to methods, and make
remote_state be truly per remote instance, allowing multiple
simultaneous instances of remote targets.
- inf-child/"native" is converted to an actual base class
(inf_child_target), that is inherited by all native targets.
- GNU/Linux
The old weird double-target linux_ops mechanism in linux-nat.c, is
gone, replaced by adding a few virtual methods to linux-nat.h's
target_ops, called low_XXX, that the concrete linux-nat
implementations override. Sort of like gdbserver's
linux_target_ops, but simpler, for requiring only one
target_ops-like hierarchy, which spares implementing the same method
twice when we need to forward the method to a low implementation.
The low target simply reimplements the target_ops method directly in
that case.
There are a few remaining linux-nat.c hooks that would be better
converted to low_ methods like above too. E.g.:
linux_nat_set_new_thread (t, x86_linux_new_thread);
linux_nat_set_new_fork (t, x86_linux_new_fork);
linux_nat_set_forget_process
That'll be done in a follow up patch.
- We can no longer use functions like x86_use_watchpoints to install
custom methods on an arbitrary base target.
The patch replaces instances of such a pattern with template mixins.
For example memory_breakpoint_target defined in target.h, or
x86_nat_target in x86-nat.h.
- linux_trad_target, MIPS and Alpha GNU/Linux
The code in the new linux-nat-trad.h/c files which was split off of
inf-ptrace.h/c recently, is converted to a C++ base class, and used
by the MIPS and Alpha GNU/Linux ports.
- BSD targets
The
$architecture x NetBSD/OpenBSD/FreeBSD
support matrix complicates things a bit. There's common BSD target
code, and there's common architecture-specific code shared between
the different BSDs. Currently, all that is stiched together to form
a final target, via the i386bsd_target, x86bsd_target,
fbsd_nat_add_target functions etc.
This introduces new fbsd_nat_target, obsd_nat_target and
nbsd_nat_target classes that serve as base/prototype target for the
corresponding BSD variant.
And introduces generic i386/AMD64 BSD targets, to be used as
template mixin to build a final target. Similarly, a generic SPARC
target is added, used by both BSD and Linux ports.
- bsd_kvm_add_target, BSD libkvm target
I considered making bsd_kvm_supply_pcb a virtual method, and then
have each port inherit bsd_kvm_target and override that method, but
that was resulting in lots of unjustified churn, so I left the
function pointer mechanism alone.
gdb/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
John Baldwin <jhb@freebsd.org>
* target.h (enum strata) <debug_stratum>: New.
(struct target_ops) <all delegation methods>: Replace by C++
virtual methods, and drop "to_" prefix. All references updated
throughout.
<to_shortname, to_longname, to_doc, to_data,
to_have_steppable_watchpoint, to_have_continuable_watchpoint,
to_has_thread_control, to_attach_no_wait>: Delete, replaced by
virtual methods. All references updated throughout.
<can_attach, supports_terminal_ours, can_create_inferior,
get_thread_control_capabilities, attach_no_wait>: New
virtual methods.
<insert_breakpoint, remove_breakpoint>: Now
TARGET_DEFAULT_NORETURN methods.
<info_proc>: Now returns bool.
<to_magic>: Delete.
(OPS_MAGIC): Delete.
(current_target): Delete. All references replaced by references
to ...
(target_stack): ... this. New.
(target_shortname, target_longname): Adjust.
(target_can_run): Now a function declaration.
(default_child_has_all_memory, default_child_has_memory)
(default_child_has_stack, default_child_has_registers)
(default_child_has_execution): Remove target_ops parameter.
(complete_target_initialization): Delete.
(memory_breakpoint_target): New template class.
(test_target_ops): Refactor as a C++ class with virtual methods.
* make-target-delegates (NAME_PART): Tighten.
(POINTER_PART, CP_SYMBOL): New.
(SIMPLE_RETURN_PART): Reimplement.
(VEC_RETURN_PART): Expect less.
(RETURN_PART, VIRTUAL_PART): New.
(METHOD): Adjust to C++ virtual methods.
(scan_target_h): Remove reference to C99.
(dname): Output "target_ops::" prefix.
(write_function_header): Adjust to output a C++ class method.
(write_declaration): New.
(write_delegator): Adjust to output a C++ class method.
(tdname): Output "dummy_target::" prefix.
(write_tdefault, write_debugmethod): Adjust to output a C++ class
method.
(tdefault_names, debug_names): Delete.
(return_types, tdefaults, styles, argtypes_array): New.
(top level): All methods are delegators.
(print_class): New.
(top level): Print dummy_target and debug_target classes.
* target-delegates.c: Regenerate.
* target-debug.h (target_debug_print_enum_info_proc_what)
(target_debug_print_thread_control_capabilities)
(target_debug_print_thread_info_p): New.
* target.c (dummy_target): Delete.
(the_dummy_target, the_debug_target): New.
(target_stack): Now extern.
(set_targetdebug): Push/unpush debug target.
(default_child_has_all_memory, default_child_has_memory)
(default_child_has_stack, default_child_has_registers)
(default_child_has_execution): Remove target_ops parameter.
(complete_target_initialization): Delete.
(add_target_with_completer): No longer call
complete_target_initialization.
(target_supports_terminal_ours): Use regular delegation.
(update_current_target): Delete.
(push_target): No longer check magic number. Don't call
update_current_target.
(unpush_target): Don't call update_current_target.
(target_is_pushed): No longer check magic number.
(target_require_runnable): Skip for all stratums over
process_stratum.
(target_ops::info_proc): New.
(target_info_proc): Use find_target_at and
find_default_run_target.
(target_supports_disable_randomization): Use regular delegation.
(target_get_osdata): Use find_target_at.
(target_ops::open, target_ops::close, target_ops::can_attach)
(target_ops::attach, target_ops::can_create_inferior)
(target_ops::create_inferior, target_ops::can_run)
(target_can_run): New.
(default_fileio_target): Use regular delegation.
(target_ops::fileio_open, target_ops::fileio_pwrite)
(target_ops::fileio_pread, target_ops::fileio_fstat)
(target_ops::fileio_close, target_ops::fileio_unlink)
(target_ops::fileio_readlink): New.
(target_fileio_open_1, target_fileio_unlink)
(target_fileio_readlink): Always call the target method. Handle
FILEIO_ENOSYS.
(return_zero, return_zero_has_execution): Delete.
(init_dummy_target): Delete.
(dummy_target::dummy_target, dummy_target::shortname)
(dummy_target::longname, dummy_target::doc)
(debug_target::debug_target, debug_target::shortname)
(debug_target::longname, debug_target::doc): New.
(target_supports_delete_record): Use regular delegation.
(setup_target_debug): Delete.
(maintenance_print_target_stack): Skip debug_stratum.
(initialize_targets): Instantiate the_dummy_target and
the_debug_target.
* auxv.c (target_auxv_parse): Remove 'ops' parameter. Adjust to
use target_stack.
(target_auxv_search, fprint_target_auxv): Adjust.
(info_auxv_command): Adjust to use target_stack.
* auxv.h (target_auxv_parse): Remove 'ops' parameter.
* exceptions.c (print_flush): Handle a NULL target_stack.
* regcache.c (target_ops_no_register): Refactor as class with
virtual methods.
* exec.c (exec_target): New class.
(exec_ops): Now an exec_target.
(exec_open, exec_close_1, exec_get_section_table)
(exec_xfer_partial, exec_files_info, exec_has_memory)
(exec_make_note_section): Refactor as exec_target methods.
(exec_file_clear, ignore, exec_remove_breakpoint, init_exec_ops):
Delete.
(exec_target::find_memory_regions): New.
(_initialize_exec): Don't call init_exec_ops.
* gdbcore.h (exec_file_clear): Delete.
* corefile.c (core_target): Delete.
(core_file_command): Adjust.
* corelow.c (core_target): New class.
(the_core_target): New.
(core_close): Remove target_ops parameter.
(core_close_cleanup): Adjust.
(core_target::close): New.
(core_open, core_detach, get_core_registers, core_files_info)
(core_xfer_partial, core_thread_alive, core_read_description)
(core_pid_to_str, core_thread_name, core_has_memory)
(core_has_stack, core_has_registers, core_info_proc): Rework as
core_target methods.
(ignore, core_remove_breakpoint, init_core_ops): Delete.
(_initialize_corelow): Initialize the_core_target.
* gdbcore.h (core_target): Delete.
(the_core_target): New.
* ctf.c: (ctf_target): New class.
(ctf_ops): Now a ctf_target.
(ctf_open, ctf_close, ctf_files_info, ctf_fetch_registers)
(ctf_xfer_partial, ctf_get_trace_state_variable_value)
(ctf_trace_find, ctf_traceframe_info): Refactor as ctf_target
methods.
(init_ctf_ops): Delete.
(_initialize_ctf): Don't call it.
* tracefile-tfile.c (tfile_target): New class.
(tfile_ops): Now a tfile_target.
(tfile_open, tfile_close, tfile_files_info)
(tfile_get_tracepoint_status, tfile_trace_find)
(tfile_fetch_registers, tfile_xfer_partial)
(tfile_get_trace_state_variable_value, tfile_traceframe_info):
Refactor as tfile_target methods.
(tfile_xfer_partial_features): Remove target_ops parameter.
(init_tfile_ops): Delete.
(_initialize_tracefile_tfile): Don't call it.
* tracefile.c (tracefile_has_all_memory, tracefile_has_memory)
(tracefile_has_stack, tracefile_has_registers)
(tracefile_thread_alive, tracefile_get_trace_status): Refactor as
tracefile_target methods.
(init_tracefile_ops): Delete.
(tracefile_target::tracefile_target): New.
* tracefile.h: Include "target.h".
(tracefile_target): New class.
(init_tracefile_ops): Delete.
* spu-multiarch.c (spu_multiarch_target): New class.
(spu_ops): Now a spu_multiarch_target.
(spu_thread_architecture, spu_region_ok_for_hw_watchpoint)
(spu_fetch_registers, spu_store_registers, spu_xfer_partial)
(spu_search_memory, spu_mourn_inferior): Refactor as
spu_multiarch_target methods.
(init_spu_ops): Delete.
(_initialize_spu_multiarch): Remove references to init_spu_ops,
complete_target_initialization.
* ravenscar-thread.c (ravenscar_thread_target): New class.
(ravenscar_ops): Now a ravenscar_thread_target.
(ravenscar_resume, ravenscar_wait, ravenscar_update_thread_list)
(ravenscar_thread_alive, ravenscar_pid_to_str)
(ravenscar_fetch_registers, ravenscar_store_registers)
(ravenscar_prepare_to_store, ravenscar_stopped_by_sw_breakpoint)
(ravenscar_stopped_by_hw_breakpoint)
(ravenscar_stopped_by_watchpoint, ravenscar_stopped_data_address)
(ravenscar_mourn_inferior, ravenscar_core_of_thread)
(ravenscar_get_ada_task_ptid): Refactor as ravenscar_thread_target
methods.
(init_ravenscar_thread_ops): Delete.
(_initialize_ravenscar): Remove references to
init_ravenscar_thread_ops and complete_target_initialization.
* bsd-uthread.c (bsd_uthread_ops_hack): Delete.
(bsd_uthread_target): New class.
(bsd_uthread_ops): Now a bsd_uthread_target.
(bsd_uthread_activate): Adjust to refer to bsd_uthread_ops.
(bsd_uthread_close, bsd_uthread_mourn_inferior)
(bsd_uthread_fetch_registers, bsd_uthread_store_registers)
(bsd_uthread_wait, bsd_uthread_resume, bsd_uthread_thread_alive)
(bsd_uthread_update_thread_list, bsd_uthread_extra_thread_info)
(bsd_uthread_pid_to_str): Refactor as bsd_uthread_target methods.
(bsd_uthread_target): Delete function.
(_initialize_bsd_uthread): Remove reference to
complete_target_initialization.
* bfd-target.c (target_bfd_data): Delete. Fields folded into ...
(target_bfd): ... this new class.
(target_bfd_xfer_partial, target_bfd_get_section_table)
(target_bfd_close): Refactor as target_bfd methods.
(target_bfd::~target_bfd): New.
(target_bfd_reopen): Adjust.
(target_bfd::close): New.
* record-btrace.c (record_btrace_target): New class.
(record_btrace_ops): Now a record_btrace_target.
(record_btrace_open, record_btrace_stop_recording)
(record_btrace_disconnect, record_btrace_close)
(record_btrace_async, record_btrace_info)
(record_btrace_insn_history, record_btrace_insn_history_range)
(record_btrace_insn_history_from, record_btrace_call_history)
(record_btrace_call_history_range)
(record_btrace_call_history_from, record_btrace_record_method)
(record_btrace_is_replaying, record_btrace_will_replay)
(record_btrace_xfer_partial, record_btrace_insert_breakpoint)
(record_btrace_remove_breakpoint, record_btrace_fetch_registers)
(record_btrace_store_registers, record_btrace_prepare_to_store)
(record_btrace_to_get_unwinder)
(record_btrace_to_get_tailcall_unwinder, record_btrace_resume)
(record_btrace_commit_resume, record_btrace_wait)
(record_btrace_stop, record_btrace_can_execute_reverse)
(record_btrace_stopped_by_sw_breakpoint)
(record_btrace_supports_stopped_by_sw_breakpoint)
(record_btrace_stopped_by_hw_breakpoint)
(record_btrace_supports_stopped_by_hw_breakpoint)
(record_btrace_update_thread_list, record_btrace_thread_alive)
(record_btrace_goto_begin, record_btrace_goto_end)
(record_btrace_goto, record_btrace_stop_replaying_all)
(record_btrace_execution_direction)
(record_btrace_prepare_to_generate_core)
(record_btrace_done_generating_core): Refactor as
record_btrace_target methods.
(init_record_btrace_ops): Delete.
(_initialize_record_btrace): Remove reference to
init_record_btrace_ops.
* record-full.c (RECORD_FULL_IS_REPLAY): Adjust to always refer to
the execution_direction global.
(record_full_base_target, record_full_target)
(record_full_core_target): New classes.
(record_full_ops): Now a record_full_target.
(record_full_core_ops): Now a record_full_core_target.
(record_full_target::detach, record_full_target::disconnect)
(record_full_core_target::disconnect)
(record_full_target::mourn_inferior, record_full_target::kill):
New.
(record_full_open, record_full_close, record_full_async): Refactor
as methods of the record_full_base_target class.
(record_full_resume, record_full_commit_resume): Refactor
as methods of the record_full_target class.
(record_full_wait, record_full_stopped_by_watchpoint)
(record_full_stopped_data_address)
(record_full_stopped_by_sw_breakpoint)
(record_full_supports_stopped_by_sw_breakpoint)
(record_full_stopped_by_hw_breakpoint)
(record_full_supports_stopped_by_hw_breakpoint): Refactor as
methods of the record_full_base_target class.
(record_full_store_registers, record_full_xfer_partial)
(record_full_insert_breakpoint, record_full_remove_breakpoint):
Refactor as methods of the record_full_target class.
(record_full_can_execute_reverse, record_full_get_bookmark)
(record_full_goto_bookmark, record_full_execution_direction)
(record_full_record_method, record_full_info, record_full_delete)
(record_full_is_replaying, record_full_will_replay)
(record_full_goto_begin, record_full_goto_end, record_full_goto)
(record_full_stop_replaying): Refactor as methods of the
record_full_base_target class.
(record_full_core_resume, record_full_core_kill)
(record_full_core_fetch_registers)
(record_full_core_prepare_to_store)
(record_full_core_store_registers, record_full_core_xfer_partial)
(record_full_core_insert_breakpoint)
(record_full_core_remove_breakpoint)
(record_full_core_has_execution): Refactor
as methods of the record_full_core_target class.
(record_full_base_target::supports_delete_record): New.
(init_record_full_ops): Delete.
(init_record_full_core_ops): Delete.
(record_full_save): Refactor as method of the
record_full_base_target class.
(_initialize_record_full): Remove references to
init_record_full_ops and init_record_full_core_ops.
* remote.c (remote_target, extended_remote_target): New classes.
(remote_ops): Now a remote_target.
(extended_remote_ops): Now an extended_remote_target.
(remote_insert_fork_catchpoint, remote_remove_fork_catchpoint)
(remote_insert_vfork_catchpoint, remote_remove_vfork_catchpoint)
(remote_insert_exec_catchpoint, remote_remove_exec_catchpoint)
(remote_pass_signals, remote_set_syscall_catchpoint)
(remote_program_signals, )
(remote_thread_always_alive): Remove target_ops parameter.
(remote_thread_alive, remote_thread_name)
(remote_update_thread_list, remote_threads_extra_info)
(remote_static_tracepoint_marker_at)
(remote_static_tracepoint_markers_by_strid)
(remote_get_ada_task_ptid, remote_close, remote_start_remote)
(remote_open): Refactor as methods of remote_target.
(extended_remote_open, extended_remote_detach)
(extended_remote_attach, extended_remote_post_attach):
(extended_remote_supports_disable_randomization)
(extended_remote_create_inferior): : Refactor as method of
extended_remote_target.
(remote_set_permissions, remote_open_1, remote_detach)
(remote_follow_fork, remote_follow_exec, remote_disconnect)
(remote_resume, remote_commit_resume, remote_stop)
(remote_interrupt, remote_pass_ctrlc, remote_terminal_inferior)
(remote_terminal_ours, remote_wait, remote_fetch_registers)
(remote_prepare_to_store, remote_store_registers)
(remote_flash_erase, remote_flash_done, remote_files_info)
(remote_kill, remote_mourn, remote_insert_breakpoint)
(remote_remove_breakpoint, remote_insert_watchpoint)
(remote_watchpoint_addr_within_range)
(remote_remove_watchpoint, remote_region_ok_for_hw_watchpoint)
(remote_check_watch_resources, remote_stopped_by_sw_breakpoint)
(remote_supports_stopped_by_sw_breakpoint)
(remote_stopped_by_hw_breakpoint)
(remote_supports_stopped_by_hw_breakpoint)
(remote_stopped_by_watchpoint, remote_stopped_data_address)
(remote_insert_hw_breakpoint, remote_remove_hw_breakpoint)
(remote_verify_memory): Refactor as methods of remote_target.
(remote_write_qxfer, remote_read_qxfer): Remove target_ops
parameter.
(remote_xfer_partial, remote_get_memory_xfer_limit)
(remote_search_memory, remote_rcmd, remote_memory_map)
(remote_pid_to_str, remote_get_thread_local_address)
(remote_get_tib_address, remote_read_description): Refactor as
methods of remote_target.
(remote_target::fileio_open, remote_target::fileio_pwrite)
(remote_target::fileio_pread, remote_target::fileio_close): New.
(remote_hostio_readlink, remote_hostio_fstat)
(remote_filesystem_is_local, remote_can_execute_reverse)
(remote_supports_non_stop, remote_supports_disable_randomization)
(remote_supports_multi_process, remote_supports_cond_breakpoints)
(remote_supports_enable_disable_tracepoint)
(remote_supports_string_tracing)
(remote_can_run_breakpoint_commands, remote_trace_init)
(remote_download_tracepoint, remote_can_download_tracepoint)
(remote_download_trace_state_variable, remote_enable_tracepoint)
(remote_disable_tracepoint, remote_trace_set_readonly_regions)
(remote_trace_start, remote_get_trace_status)
(remote_get_tracepoint_status, remote_trace_stop)
(remote_trace_find, remote_get_trace_state_variable_value)
(remote_save_trace_data, remote_get_raw_trace_data)
(remote_set_disconnected_tracing, remote_core_of_thread)
(remote_set_circular_trace_buffer, remote_traceframe_info)
(remote_get_min_fast_tracepoint_insn_len)
(remote_set_trace_buffer_size, remote_set_trace_notes)
(remote_use_agent, remote_can_use_agent, remote_enable_btrace)
(remote_disable_btrace, remote_teardown_btrace)
(remote_read_btrace, remote_btrace_conf)
(remote_augmented_libraries_svr4_read, remote_load)
(remote_pid_to_exec_file, remote_can_do_single_step)
(remote_execution_direction, remote_thread_handle_to_thread_info):
Refactor as methods of remote_target.
(init_remote_ops, init_extended_remote_ops): Delete.
(remote_can_async_p, remote_is_async_p, remote_async)
(remote_thread_events, remote_upload_tracepoints)
(remote_upload_trace_state_variables): Refactor as methods of
remote_target.
(_initialize_remote): Remove references to init_remote_ops and
init_extended_remote_ops.
* remote-sim.c (gdbsim_target): New class.
(gdbsim_fetch_register, gdbsim_store_register, gdbsim_kill)
(gdbsim_load, gdbsim_create_inferior, gdbsim_open, gdbsim_close)
(gdbsim_detach, gdbsim_resume, gdbsim_interrupt)
(gdbsim_wait, gdbsim_prepare_to_store, gdbsim_xfer_partial)
(gdbsim_files_info, gdbsim_mourn_inferior, gdbsim_thread_alive)
(gdbsim_pid_to_str, gdbsim_has_all_memory, gdbsim_has_memory):
Refactor as methods of gdbsim_target.
(gdbsim_ops): Now a gdbsim_target.
(init_gdbsim_ops): Delete.
(gdbsim_cntrl_c): Adjust.
(_initialize_remote_sim): Remove reference to init_gdbsim_ops.
* amd64-linux-nat.c (amd64_linux_nat_target): New class.
(the_amd64_linux_nat_target): New.
(amd64_linux_fetch_inferior_registers)
(amd64_linux_store_inferior_registers): Refactor as methods of
amd64_linux_nat_target.
(_initialize_amd64_linux_nat): Adjust. Set linux_target.
* i386-linux-nat.c: Don't include "linux-nat.h".
(i386_linux_nat_target): New class.
(the_i386_linux_nat_target): New.
(i386_linux_fetch_inferior_registers)
(i386_linux_store_inferior_registers, i386_linux_resume): Refactor
as methods of i386_linux_nat_target.
(_initialize_i386_linux_nat): Adjust. Set linux_target.
* inf-child.c (inf_child_ops): Delete.
(inf_child_fetch_inferior_registers)
(inf_child_store_inferior_registers): Delete.
(inf_child_post_attach, inf_child_prepare_to_store): Refactor as
methods of inf_child_target.
(inf_child_target::supports_terminal_ours)
(inf_child_target::terminal_init)
(inf_child_target::terminal_inferior)
(inf_child_target::terminal_ours_for_output)
(inf_child_target::terminal_ours, inf_child_target::interrupt)
(inf_child_target::pass_ctrlc, inf_child_target::terminal_info):
New.
(inf_child_open, inf_child_disconnect, inf_child_close)
(inf_child_mourn_inferior, inf_child_maybe_unpush_target)
(inf_child_post_startup_inferior, inf_child_can_run)
(inf_child_pid_to_exec_file): Refactor as methods of
inf_child_target.
(inf_child_follow_fork): Delete.
(inf_child_target::can_create_inferior)
(inf_child_target::can_attach): New.
(inf_child_target::has_all_memory, inf_child_target::has_memory)
(inf_child_target::has_stack, inf_child_target::has_registers)
(inf_child_target::has_execution): New.
(inf_child_fileio_open, inf_child_fileio_pwrite)
(inf_child_fileio_pread, inf_child_fileio_fstat)
(inf_child_fileio_close, inf_child_fileio_unlink)
(inf_child_fileio_readlink, inf_child_use_agent)
(inf_child_can_use_agent): Refactor as methods of
inf_child_target.
(return_zero, inf_child_target): Delete.
(inf_child_target::inf_child_target): New.
* inf-child.h: Include "target.h".
(inf_child_target): Delete function prototype.
(inf_child_target): New class.
(inf_child_open_target, inf_child_mourn_inferior)
(inf_child_maybe_unpush_target): Delete.
* inf-ptrace.c (inf_ptrace_target::~inf_ptrace_target): New.
(inf_ptrace_follow_fork, inf_ptrace_insert_fork_catchpoint)
(inf_ptrace_remove_fork_catchpoint, inf_ptrace_create_inferior)
(inf_ptrace_post_startup_inferior, inf_ptrace_mourn_inferior)
(inf_ptrace_attach, inf_ptrace_post_attach, inf_ptrace_detach)
(inf_ptrace_detach_success, inf_ptrace_kill, inf_ptrace_resume)
(inf_ptrace_wait, inf_ptrace_xfer_partial)
(inf_ptrace_thread_alive, inf_ptrace_files_info)
(inf_ptrace_pid_to_str, inf_ptrace_auxv_parse): Refactor as
methods of inf_ptrace_target.
(inf_ptrace_target): Delete function.
* inf-ptrace.h: Include "inf-child.h".
(inf_ptrace_target): Delete function declaration.
(inf_ptrace_target): New class.
(inf_ptrace_trad_target, inf_ptrace_detach_success): Delete.
* linux-nat.c (linux_target): New.
(linux_ops, linux_ops_saved, super_xfer_partial): Delete.
(linux_nat_target::~linux_nat_target): New.
(linux_child_post_attach, linux_child_post_startup_inferior)
(linux_child_follow_fork, linux_child_insert_fork_catchpoint)
(linux_child_remove_fork_catchpoint)
(linux_child_insert_vfork_catchpoint)
(linux_child_remove_vfork_catchpoint)
(linux_child_insert_exec_catchpoint)
(linux_child_remove_exec_catchpoint)
(linux_child_set_syscall_catchpoint, linux_nat_pass_signals)
(linux_nat_create_inferior, linux_nat_attach, linux_nat_detach)
(linux_nat_resume, linux_nat_stopped_by_watchpoint)
(linux_nat_stopped_data_address)
(linux_nat_stopped_by_sw_breakpoint)
(linux_nat_supports_stopped_by_sw_breakpoint)
(linux_nat_stopped_by_hw_breakpoint)
(linux_nat_supports_stopped_by_hw_breakpoint, linux_nat_wait)
(linux_nat_kill, linux_nat_mourn_inferior)
(linux_nat_xfer_partial, linux_nat_thread_alive)
(linux_nat_update_thread_list, linux_nat_pid_to_str)
(linux_nat_thread_name, linux_child_pid_to_exec_file)
(linux_child_static_tracepoint_markers_by_strid)
(linux_nat_is_async_p, linux_nat_can_async_p)
(linux_nat_supports_non_stop, linux_nat_always_non_stop_p)
(linux_nat_supports_multi_process)
(linux_nat_supports_disable_randomization, linux_nat_async)
(linux_nat_stop, linux_nat_close, linux_nat_thread_address_space)
(linux_nat_core_of_thread, linux_nat_filesystem_is_local)
(linux_nat_fileio_open, linux_nat_fileio_readlink)
(linux_nat_fileio_unlink, linux_nat_thread_events): Refactor as
methods of linux_nat_target.
(linux_nat_wait_1, linux_xfer_siginfo, linux_proc_xfer_partial)
(linux_proc_xfer_spu, linux_nat_xfer_osdata): Remove target_ops
parameter.
(check_stopped_by_watchpoint): Adjust.
(linux_xfer_partial): Delete.
(linux_target_install_ops, linux_target, linux_nat_add_target):
Delete.
(linux_nat_target::linux_nat_target): New.
* linux-nat.h: Include "inf-ptrace.h".
(linux_nat_target): New.
(linux_target, linux_target_install_ops, linux_nat_add_target):
Delete function declarations.
(linux_target): Declare global.
* linux-thread-db.c (thread_db_target): New.
(thread_db_target::thread_db_target): New.
(thread_db_ops): Delete.
(the_thread_db_target): New.
(thread_db_detach, thread_db_wait, thread_db_mourn_inferior)
(thread_db_update_thread_list, thread_db_pid_to_str)
(thread_db_extra_thread_info)
(thread_db_thread_handle_to_thread_info)
(thread_db_get_thread_local_address, thread_db_get_ada_task_ptid)
(thread_db_resume): Refactor as methods of thread_db_target.
(init_thread_db_ops): Delete.
(_initialize_thread_db): Remove reference to init_thread_db_ops.
* x86-linux-nat.c: Don't include "linux-nat.h".
(super_post_startup_inferior): Delete.
(x86_linux_nat_target::~x86_linux_nat_target): New.
(x86_linux_child_post_startup_inferior)
(x86_linux_read_description, x86_linux_enable_btrace)
(x86_linux_disable_btrace, x86_linux_teardown_btrace)
(x86_linux_read_btrace, x86_linux_btrace_conf): Refactor as
methods of x86_linux_nat_target.
(x86_linux_create_target): Delete. Bits folded ...
(x86_linux_add_target): ... here. Now takes a linux_nat_target
pointer.
* x86-linux-nat.h: Include "linux-nat.h" and "x86-nat.h".
(x86_linux_nat_target): New class.
(x86_linux_create_target): Delete.
(x86_linux_add_target): Now takes a linux_nat_target pointer.
* x86-nat.c (x86_insert_watchpoint, x86_remove_watchpoint)
(x86_region_ok_for_watchpoint, x86_stopped_data_address)
(x86_stopped_by_watchpoint, x86_insert_hw_breakpoint)
(x86_remove_hw_breakpoint, x86_can_use_hw_breakpoint)
(x86_stopped_by_hw_breakpoint): Remove target_ops parameter and
make extern.
(x86_use_watchpoints): Delete.
* x86-nat.h: Include "breakpoint.h" and "target.h".
(x86_use_watchpoints): Delete.
(x86_can_use_hw_breakpoint, x86_region_ok_for_hw_watchpoint)
(x86_stopped_by_watchpoint, x86_stopped_data_address)
(x86_insert_watchpoint, x86_remove_watchpoint)
(x86_insert_hw_breakpoint, x86_remove_hw_breakpoint)
(x86_stopped_by_hw_breakpoint): New declarations.
(x86_nat_target): New template class.
* ppc-linux-nat.c (ppc_linux_nat_target): New class.
(the_ppc_linux_nat_target): New.
(ppc_linux_fetch_inferior_registers)
(ppc_linux_can_use_hw_breakpoint)
(ppc_linux_region_ok_for_hw_watchpoint)
(ppc_linux_ranged_break_num_registers)
(ppc_linux_insert_hw_breakpoint, ppc_linux_remove_hw_breakpoint)
(ppc_linux_insert_mask_watchpoint)
(ppc_linux_remove_mask_watchpoint)
(ppc_linux_can_accel_watchpoint_condition)
(ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint)
(ppc_linux_stopped_data_address, ppc_linux_stopped_by_watchpoint)
(ppc_linux_watchpoint_addr_within_range)
(ppc_linux_masked_watch_num_registers)
(ppc_linux_store_inferior_registers, ppc_linux_auxv_parse)
(ppc_linux_read_description): Refactor as methods of
ppc_linux_nat_target.
(_initialize_ppc_linux_nat): Adjust. Set linux_target.
* procfs.c (procfs_xfer_partial): Delete forward declaration.
(procfs_target): New class.
(the_procfs_target): New.
(procfs_target): Delete function.
(procfs_auxv_parse, procfs_attach, procfs_detach)
(procfs_fetch_registers, procfs_store_registers, procfs_wait)
(procfs_xfer_partial, procfs_resume, procfs_pass_signals)
(procfs_files_info, procfs_kill_inferior, procfs_mourn_inferior)
(procfs_create_inferior, procfs_update_thread_list)
(procfs_thread_alive, procfs_pid_to_str)
(procfs_can_use_hw_breakpoint, procfs_stopped_by_watchpoint)
(procfs_stopped_data_address, procfs_insert_watchpoint)
(procfs_remove_watchpoint, procfs_region_ok_for_hw_watchpoint)
(proc_find_memory_regions, procfs_info_proc)
(procfs_make_note_section): Refactor as methods of procfs_target.
(_initialize_procfs): Adjust.
* sol-thread.c (sol_thread_target): New class.
(sol_thread_ops): Now a sol_thread_target.
(sol_thread_detach, sol_thread_resume, sol_thread_wait)
(sol_thread_fetch_registers, sol_thread_store_registers)
(sol_thread_xfer_partial, sol_thread_mourn_inferior)
(sol_thread_alive, solaris_pid_to_str, sol_update_thread_list)
(sol_get_ada_task_ptid): Refactor as methods of sol_thread_target.
(init_sol_thread_ops): Delete.
(_initialize_sol_thread): Adjust. Remove references to
init_sol_thread_ops and complete_target_initialization.
* windows-nat.c (windows_nat_target): New class.
(windows_fetch_inferior_registers)
(windows_store_inferior_registers, windows_resume, windows_wait)
(windows_attach, windows_detach, windows_pid_to_exec_file)
(windows_files_info, windows_create_inferior)
(windows_mourn_inferior, windows_interrupt, windows_kill_inferior)
(windows_close, windows_pid_to_str, windows_xfer_partial)
(windows_get_tib_address, windows_get_ada_task_ptid)
(windows_thread_name, windows_thread_alive): Refactor as
windows_nat_target methods.
(do_initial_windows_stuff): Adjust.
(windows_target): Delete function.
(_initialize_windows_nat): Adjust.
* darwin-nat.c (darwin_resume, darwin_wait_to, darwin_interrupt)
(darwin_mourn_inferior, darwin_kill_inferior)
(darwin_create_inferior, darwin_attach, darwin_detach)
(darwin_pid_to_str, darwin_thread_alive, darwin_xfer_partial)
(darwin_pid_to_exec_file, darwin_get_ada_task_ptid)
(darwin_supports_multi_process): Refactor as darwin_nat_target
methods.
(darwin_resume_to, darwin_files_info): Delete.
(_initialize_darwin_inferior): Rename to ...
(_initialize_darwin_nat): ... this. Adjust to C++ification.
* darwin-nat.h: Include "inf-child.h".
(darwin_nat_target): New class.
(darwin_complete_target): Delete.
* i386-darwin-nat.c (i386_darwin_nat_target): New class.
(darwin_target): New.
(i386_darwin_fetch_inferior_registers)
(i386_darwin_store_inferior_registers): Refactor as methods of
darwin_nat_target.
(darwin_complete_target): Delete, with ...
(_initialize_i386_darwin_nat): ... bits factored out here.
* alpha-linux-nat.c (alpha_linux_nat_target): New class.
(the_alpha_linux_nat_target): New.
(alpha_linux_register_u_offset): Refactor as
alpha_linux_nat_target method.
(_initialize_alpha_linux_nat): Adjust.
* linux-nat-trad.c (inf_ptrace_register_u_offset): Delete.
(inf_ptrace_fetch_register, inf_ptrace_fetch_registers)
(inf_ptrace_store_register, inf_ptrace_store_registers): Refact as
methods of linux_nat_trad_target.
(linux_trad_target): Delete.
* linux-nat-trad.h (linux_trad_target): Delete function.
(linux_nat_trad_target): New class.
* mips-linux-nat.c (mips_linux_nat_target): New class.
(super_fetch_registers, super_store_registers, super_close):
Delete.
(the_mips_linux_nat_target): New.
(mips64_linux_regsets_fetch_registers)
(mips64_linux_regsets_store_registers)
(mips64_linux_fetch_registers, mips64_linux_store_registers)
(mips_linux_register_u_offset, mips_linux_read_description)
(mips_linux_can_use_hw_breakpoint)
(mips_linux_stopped_by_watchpoint)
(mips_linux_stopped_data_address)
(mips_linux_region_ok_for_hw_watchpoint)
(mips_linux_insert_watchpoint, mips_linux_remove_watchpoint)
(mips_linux_close): Refactor as methods of mips_linux_nat.
(_initialize_mips_linux_nat): Adjust to C++ification.
* aix-thread.c (aix_thread_target): New class.
(aix_thread_ops): Now an aix_thread_target.
(aix_thread_detach, aix_thread_resume, aix_thread_wait)
(aix_thread_fetch_registers, aix_thread_store_registers)
(aix_thread_xfer_partial, aix_thread_mourn_inferior)
(aix_thread_thread_alive, aix_thread_pid_to_str)
(aix_thread_extra_thread_info, aix_thread_get_ada_task_ptid):
Refactor as methods of aix_thread_target.
(init_aix_thread_ops): Delete.
(_initialize_aix_thread): Remove references to init_aix_thread_ops
and complete_target_initialization.
* rs6000-nat.c (rs6000_xfer_shared_libraries): Delete.
(rs6000_nat_target): New class.
(the_rs6000_nat_target): New.
(rs6000_fetch_inferior_registers, rs6000_store_inferior_registers)
(rs6000_xfer_partial, rs6000_wait, rs6000_create_inferior)
(rs6000_xfer_shared_libraries): Refactor as rs6000_nat_target methods.
(super_create_inferior): Delete.
(_initialize_rs6000_nat): Adjust to C++ification.
* arm-linux-nat.c (arm_linux_nat_target): New class.
(the_arm_linux_nat_target): New.
(arm_linux_fetch_inferior_registers)
(arm_linux_store_inferior_registers, arm_linux_read_description)
(arm_linux_can_use_hw_breakpoint, arm_linux_insert_hw_breakpoint)
(arm_linux_remove_hw_breakpoint)
(arm_linux_region_ok_for_hw_watchpoint)
(arm_linux_insert_watchpoint, arm_linux_remove_watchpoint)
(arm_linux_stopped_data_address, arm_linux_stopped_by_watchpoint)
(arm_linux_watchpoint_addr_within_range): Refactor as methods of
arm_linux_nat_target.
(_initialize_arm_linux_nat): Adjust to C++ification.
* aarch64-linux-nat.c (aarch64_linux_nat_target): New class.
(the_aarch64_linux_nat_target): New.
(aarch64_linux_fetch_inferior_registers)
(aarch64_linux_store_inferior_registers)
(aarch64_linux_child_post_startup_inferior)
(aarch64_linux_read_description)
(aarch64_linux_can_use_hw_breakpoint)
(aarch64_linux_insert_hw_breakpoint)
(aarch64_linux_remove_hw_breakpoint)
(aarch64_linux_insert_watchpoint, aarch64_linux_remove_watchpoint)
(aarch64_linux_region_ok_for_hw_watchpoint)
(aarch64_linux_stopped_data_address)
(aarch64_linux_stopped_by_watchpoint)
(aarch64_linux_watchpoint_addr_within_range)
(aarch64_linux_can_do_single_step): Refactor as methods of
aarch64_linux_nat_target.
(super_post_startup_inferior): Delete.
(_initialize_aarch64_linux_nat): Adjust to C++ification.
* hppa-linux-nat.c (hppa_linux_nat_target): New class.
(the_hppa_linux_nat_target): New.
(hppa_linux_fetch_inferior_registers)
(hppa_linux_store_inferior_registers): Refactor as methods of
hppa_linux_nat_target.
(_initialize_hppa_linux_nat): Adjust to C++ification.
* ia64-linux-nat.c (ia64_linux_nat_target): New class.
(the_ia64_linux_nat_target): New.
(ia64_linux_insert_watchpoint, ia64_linux_remove_watchpoint)
(ia64_linux_stopped_data_address)
(ia64_linux_stopped_by_watchpoint, ia64_linux_fetch_registers)
(ia64_linux_store_registers, ia64_linux_xfer_partial): Refactor as
ia64_linux_nat_target methods.
(super_xfer_partial): Delete.
(_initialize_ia64_linux_nat): Adjust to C++ification.
* m32r-linux-nat.c (m32r_linux_nat_target): New class.
(the_m32r_linux_nat_target): New.
(m32r_linux_fetch_inferior_registers)
(m32r_linux_store_inferior_registers): Refactor as
m32r_linux_nat_target methods.
(_initialize_m32r_linux_nat): Adjust to C++ification.
* m68k-linux-nat.c (m68k_linux_nat_target): New class.
(the_m68k_linux_nat_target): New.
(m68k_linux_fetch_inferior_registers)
(m68k_linux_store_inferior_registers): Refactor as
m68k_linux_nat_target methods.
(_initialize_m68k_linux_nat): Adjust to C++ification.
* s390-linux-nat.c (s390_linux_nat_target): New class.
(the_s390_linux_nat_target): New.
(s390_linux_fetch_inferior_registers)
(s390_linux_store_inferior_registers, s390_stopped_by_watchpoint)
(s390_insert_watchpoint, s390_remove_watchpoint)
(s390_can_use_hw_breakpoint, s390_insert_hw_breakpoint)
(s390_remove_hw_breakpoint, s390_region_ok_for_hw_watchpoint)
(s390_auxv_parse, s390_read_description): Refactor as methods of
s390_linux_nat_target.
(_initialize_s390_nat): Adjust to C++ification.
* sparc-linux-nat.c (sparc_linux_nat_target): New class.
(the_sparc_linux_nat_target): New.
(_initialize_sparc_linux_nat): Adjust to C++ification.
* sparc-nat.c (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers): Remove target_ops parameter.
* sparc-nat.h (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers): Remove target_ops parameter.
* sparc64-linux-nat.c (sparc64_linux_nat_target): New class.
(the_sparc64_linux_nat_target): New.
(_initialize_sparc64_linux_nat): Adjust to C++ification.
* spu-linux-nat.c (spu_linux_nat_target): New class.
(the_spu_linux_nat_target): New.
(spu_child_post_startup_inferior, spu_child_post_attach)
(spu_child_wait, spu_fetch_inferior_registers)
(spu_store_inferior_registers, spu_xfer_partial)
(spu_can_use_hw_breakpoint): Refactor as spu_linux_nat_target
methods.
(_initialize_spu_nat): Adjust to C++ification.
* tilegx-linux-nat.c (tilegx_linux_nat_target): New class.
(the_tilegx_linux_nat_target): New.
(fetch_inferior_registers, store_inferior_registers):
Refactor as methods.
(_initialize_tile_linux_nat): Adjust to C++ification.
* xtensa-linux-nat.c (xtensa_linux_nat_target): New class.
(the_xtensa_linux_nat_target): New.
(xtensa_linux_fetch_inferior_registers)
(xtensa_linux_store_inferior_registers): Refactor as
xtensa_linux_nat_target methods.
(_initialize_xtensa_linux_nat): Adjust to C++ification.
* fbsd-nat.c (USE_SIGTRAP_SIGINFO): Delete.
(fbsd_pid_to_exec_file, fbsd_find_memory_regions)
(fbsd_find_memory_regions, fbsd_info_proc, fbsd_xfer_partial)
(fbsd_thread_alive, fbsd_pid_to_str, fbsd_thread_name)
(fbsd_update_thread_list, fbsd_resume, fbsd_wait)
(fbsd_stopped_by_sw_breakpoint)
(fbsd_supports_stopped_by_sw_breakpoint, fbsd_follow_fork)
(fbsd_insert_fork_catchpoint, fbsd_remove_fork_catchpoint)
(fbsd_insert_vfork_catchpoint, fbsd_remove_vfork_catchpoint)
(fbsd_post_startup_inferior, fbsd_post_attach)
(fbsd_insert_exec_catchpoint, fbsd_remove_exec_catchpoint)
(fbsd_set_syscall_catchpoint)
(super_xfer_partial, super_resume, super_wait)
(fbsd_supports_stopped_by_hw_breakpoint): Delete.
(fbsd_handle_debug_trap): Remove target_ops parameter.
(fbsd_nat_add_target): Delete.
* fbsd-nat.h: Include "inf-ptrace.h".
(fbsd_nat_add_target): Delete.
(USE_SIGTRAP_SIGINFO): Define.
(fbsd_nat_target): New class.
* amd64-bsd-nat.c (amd64bsd_fetch_inferior_registers)
(amd64bsd_store_inferior_registers): Remove target_ops parameter.
(amd64bsd_target): Delete.
* amd64-bsd-nat.h: New file.
* amd64-fbsd-nat.c: Include "amd64-bsd-nat.h" instead of
"x86-bsd-nat.h".
(amd64_fbsd_nat_target): New class.
(the_amd64_fbsd_nat_target): New.
(amd64fbsd_read_description): Refactor as method of
amd64_fbsd_nat_target.
(amd64_fbsd_nat_target::supports_stopped_by_hw_breakpoint): New.
(_initialize_amd64fbsd_nat): Adjust to C++ification.
* amd64-nat.h (amd64bsd_target): Delete function declaration.
* i386-bsd-nat.c (i386bsd_fetch_inferior_registers)
(i386bsd_store_inferior_registers): Remove target_ops parameter.
(i386bsd_target): Delete.
* i386-bsd-nat.h (i386bsd_target): Delete function declaration.
(i386bsd_fetch_inferior_registers)
(i386bsd_store_inferior_registers): Declare.
(i386_bsd_nat_target): New class.
* i386-fbsd-nat.c (i386_fbsd_nat_target): New class.
(the_i386_fbsd_nat_target): New.
(i386fbsd_resume, i386fbsd_read_description): Refactor as
i386_fbsd_nat_target methods.
(i386_fbsd_nat_target::supports_stopped_by_hw_breakpoint): New.
(_initialize_i386fbsd_nat): Adjust to C++ification.
* x86-bsd-nat.c (super_mourn_inferior): Delete.
(x86bsd_mourn_inferior, x86bsd_target): Delete.
(_initialize_x86_bsd_nat): Adjust to C++ification.
* x86-bsd-nat.h: Include "x86-nat.h".
(x86bsd_target): Delete declaration.
(x86bsd_nat_target): New class.
* aarch64-fbsd-nat.c (aarch64_fbsd_nat_target): New class.
(the_aarch64_fbsd_nat_target): New.
(aarch64_fbsd_fetch_inferior_registers)
(aarch64_fbsd_store_inferior_registers): Refactor as methods of
aarch64_fbsd_nat_target.
(_initialize_aarch64_fbsd_nat): Adjust to C++ification.
* alpha-bsd-nat.c (alpha_bsd_nat_target): New class.
(the_alpha_bsd_nat_target): New.
(alphabsd_fetch_inferior_registers)
(alphabsd_store_inferior_registers): Refactor as
alpha_bsd_nat_target methods.
(_initialize_alphabsd_nat): Refactor as methods of
alpha_bsd_nat_target.
* amd64-nbsd-nat.c: Include "amd64-bsd-nat.h".
(the_amd64_nbsd_nat_target): New.
(_initialize_amd64nbsd_nat): Adjust to C++ification.
* amd64-obsd-nat.c: Include "amd64-bsd-nat.h".
(the_amd64_obsd_nat_target): New.
(_initialize_amd64obsd_nat): Adjust to C++ification.
* arm-fbsd-nat.c (arm_fbsd_nat_target): New.
(the_arm_fbsd_nat_target): New.
(arm_fbsd_fetch_inferior_registers)
(arm_fbsd_store_inferior_registers, arm_fbsd_read_description):
(_initialize_arm_fbsd_nat): Refactor as methods of
arm_fbsd_nat_target.
(_initialize_arm_fbsd_nat): Adjust to C++ification.
* arm-nbsd-nat.c (arm_netbsd_nat_target): New class.
(the_arm_netbsd_nat_target): New.
(armnbsd_fetch_registers, armnbsd_store_registers): Refactor as
arm_netbsd_nat_target.
(_initialize_arm_netbsd_nat): Adjust to C++ification.
* hppa-nbsd-nat.c (hppa_nbsd_nat_target): New class.
(the_hppa_nbsd_nat_target): New.
(hppanbsd_fetch_registers, hppanbsd_store_registers): Refactor as
hppa_nbsd_nat_target methods.
(_initialize_hppanbsd_nat): Adjust to C++ification.
* hppa-obsd-nat.c (hppa_obsd_nat_target): New class.
(the_hppa_obsd_nat_target): New.
(hppaobsd_fetch_registers, hppaobsd_store_registers): Refactor as
methods of hppa_obsd_nat_target.
(_initialize_hppaobsd_nat): Adjust to C++ification. Use
add_target.
* i386-nbsd-nat.c (the_i386_nbsd_nat_target): New.
(_initialize_i386nbsd_nat): Adjust to C++ification. Use
add_target.
* i386-obsd-nat.c (the_i386_obsd_nat_target): New.
(_initialize_i386obsd_nat): Use add_target.
* m68k-bsd-nat.c (m68k_bsd_nat_target): New class.
(the_m68k_bsd_nat_target): New.
(m68kbsd_fetch_inferior_registers)
(m68kbsd_store_inferior_registers): Refactor as methods of
m68k_bsd_nat_target.
(_initialize_m68kbsd_nat): Adjust to C++ification.
* mips-fbsd-nat.c (mips_fbsd_nat_target): New class.
(the_mips_fbsd_nat_target): New.
(mips_fbsd_fetch_inferior_registers)
(mips_fbsd_store_inferior_registers): Refactor as methods of
mips_fbsd_nat_target.
(_initialize_mips_fbsd_nat): Adjust to C++ification. Use
add_target.
* mips-nbsd-nat.c (mips_nbsd_nat_target): New class.
(the_mips_nbsd_nat_target): New.
(mipsnbsd_fetch_inferior_registers)
(mipsnbsd_store_inferior_registers): Refactor as methods of
mips_nbsd_nat_target.
(_initialize_mipsnbsd_nat): Adjust to C++ification.
* mips64-obsd-nat.c (mips64_obsd_nat_target): New class.
(the_mips64_obsd_nat_target): New.
(mips64obsd_fetch_inferior_registers)
(mips64obsd_store_inferior_registers): Refactor as methods of
mips64_obsd_nat_target.
(_initialize_mips64obsd_nat): Adjust to C++ification. Use
add_target.
* nbsd-nat.c (nbsd_pid_to_exec_file): Refactor as method of
nbsd_nat_target.
* nbsd-nat.h: Include "inf-ptrace.h".
(nbsd_nat_target): New class.
* obsd-nat.c (obsd_pid_to_str, obsd_update_thread_list)
(obsd_wait): Refactor as methods of obsd_nat_target.
(obsd_add_target): Delete.
* obsd-nat.h: Include "inf-ptrace.h".
(obsd_nat_target): New class.
* ppc-fbsd-nat.c (ppc_fbsd_nat_target): New class.
(the_ppc_fbsd_nat_target): New.
(ppcfbsd_fetch_inferior_registers)
(ppcfbsd_store_inferior_registers): Refactor as methods of
ppc_fbsd_nat_target.
(_initialize_ppcfbsd_nat): Adjust to C++ification. Use
add_target.
* ppc-nbsd-nat.c (ppc_nbsd_nat_target): New class.
(the_ppc_nbsd_nat_target): New.
(ppcnbsd_fetch_inferior_registers)
(ppcnbsd_store_inferior_registers): Refactor as methods of
ppc_nbsd_nat_target.
(_initialize_ppcnbsd_nat): Adjust to C++ification.
* ppc-obsd-nat.c (ppc_obsd_nat_target): New class.
(the_ppc_obsd_nat_target): New.
(ppcobsd_fetch_registers, ppcobsd_store_registers): Refactor as
methods of ppc_obsd_nat_target.
(_initialize_ppcobsd_nat): Adjust to C++ification. Use
add_target.
* sh-nbsd-nat.c (sh_nbsd_nat_target): New class.
(the_sh_nbsd_nat_target): New.
(shnbsd_fetch_inferior_registers)
(shnbsd_store_inferior_registers): Refactor as methods of
sh_nbsd_nat_target.
(_initialize_shnbsd_nat): Adjust to C++ification.
* sparc-nat.c (sparc_xfer_wcookie): Make extern.
(inf_ptrace_xfer_partial): Delete.
(sparc_xfer_partial, sparc_target): Delete.
* sparc-nat.h (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers, sparc_xfer_wcookie): Declare.
(sparc_target): Delete function declaration.
(sparc_target): New template class.
* sparc-nbsd-nat.c (the_sparc_nbsd_nat_target): New.
(_initialize_sparcnbsd_nat): Adjust to C++ification.
* sparc64-fbsd-nat.c (the_sparc64_fbsd_nat_target): New.
(_initialize_sparc64fbsd_nat): Adjust to C++ification. Use
add_target.
* sparc64-nbsd-nat.c (the_sparc64_nbsd_nat_target): New.
(_initialize_sparc64nbsd_nat): Adjust to C++ification.
* sparc64-obsd-nat.c (the_sparc64_obsd_nat_target): New.
(_initialize_sparc64obsd_nat): Adjust to C++ification. Use
add_target.
* vax-bsd-nat.c (vax_bsd_nat_target): New class.
(the_vax_bsd_nat_target): New.
(vaxbsd_fetch_inferior_registers)
(vaxbsd_store_inferior_registers): Refactor as vax_bsd_nat_target
methods.
(_initialize_vaxbsd_nat): Adjust to C++ification.
* bsd-kvm.c (bsd_kvm_target): New class.
(bsd_kvm_ops): Now a bsd_kvm_target.
(bsd_kvm_open, bsd_kvm_close, bsd_kvm_xfer_partial)
(bsd_kvm_files_info, bsd_kvm_fetch_registers)
(bsd_kvm_thread_alive, bsd_kvm_pid_to_str): Refactor as methods of
bsd_kvm_target.
(bsd_kvm_return_one): Delete.
(bsd_kvm_add_target): Adjust to C++ification.
* nto-procfs.c (nto_procfs_target, nto_procfs_target_native)
(nto_procfs_target_procfs): New classes.
(procfs_open_1, procfs_thread_alive, procfs_update_thread_list)
(procfs_files_info, procfs_pid_to_exec_file, procfs_attach)
(procfs_post_attach, procfs_wait, procfs_fetch_registers)
(procfs_xfer_partial, procfs_detach, procfs_insert_breakpoint)
(procfs_remove_breakpoint, procfs_insert_hw_breakpoint)
(procfs_remove_hw_breakpoint, procfs_resume)
(procfs_mourn_inferior, procfs_create_inferior, procfs_interrupt)
(procfs_kill_inferior, procfs_store_registers)
(procfs_pass_signals, procfs_pid_to_str, procfs_can_run): Refactor
as methods of nto_procfs_target.
(nto_procfs_ops): Now an nto_procfs_target_procfs.
(nto_native_ops): Delete.
(procfs_open, procfs_native_open): Delete.
(nto_native_ops): Now an nto_procfs_target_native.
(init_procfs_targets): Adjust to C++ification.
(procfs_can_use_hw_breakpoint, procfs_remove_hw_watchpoint)
(procfs_insert_hw_watchpoint, procfs_stopped_by_watchpoint):
Refactor as methods of nto_procfs_target.
* go32-nat.c (go32_nat_target): New class.
(the_go32_nat_target): New.
(go32_attach, go32_resume, go32_wait, go32_fetch_registers)
(go32_store_registers, go32_xfer_partial, go32_files_info)
(go32_kill_inferior, go32_create_inferior, go32_mourn_inferior)
(go32_terminal_init, go32_terminal_info, go32_terminal_inferior)
(go32_terminal_ours, go32_pass_ctrlc, go32_thread_alive)
(go32_pid_to_str): Refactor as methods of go32_nat_target.
(go32_target): Delete.
(_initialize_go32_nat): Adjust to C++ification.
* gnu-nat.c (gnu_wait, gnu_resume, gnu_kill_inferior)
(gnu_mourn_inferior, gnu_create_inferior, gnu_attach, gnu_detach)
(gnu_stop, gnu_thread_alive, gnu_xfer_partial)
(gnu_find_memory_regions, gnu_pid_to_str): Refactor as methods of
gnu_nat_target.
(gnu_target): Delete.
* gnu-nat.h (gnu_target): Delete.
(gnu_nat_target): New class.
* i386-gnu-nat.c (gnu_base_target): New.
(i386_gnu_nat_target): New class.
(the_i386_gnu_nat_target): New.
(_initialize_i386gnu_nat): Adjust to C++ification.
gdb/testsuite/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
* gdb.base/breakpoint-in-ro-region.exp: Adjust to to_resume and
to_log_command renames.
* gdb.base/sss-bp-on-user-bp-2.exp: Likewise.
Pedro Alves
Simon Marchi
Tankut Baris Aktemur
Joel Brobecker
Simon Marchi
Ulrich Weigand
Philippe Waroquiers
Tom Tromey
Tom Tromey
Hafiz Abid Qadeer
Simon Marchi
Alan Hayward