doesn't always mean you need to define a function symbol on plt code.
If all references are in read-write sections, then using dynamic relocs
is OK.
bfd/
* elf32-ppc.c (ppc_elf_adjust_dynamic_symbol): Clear
pointer_equality_needed when !readonly_dynrelocs.
* elf64-ppc.c (ppc64_elf_adjust_dynamic_symbol): Likewise.
ld/testsuite/
* ld-powerpc/ambiguousv1.d: Match symbol table too.
* ld-powerpc/ambiguousv2.d: Likewise.
* ld-powerpc/ambiguousv1b.d: New.
* ld-powerpc/ambiguousv2b.d: New.
* ld-powerpc/powerpc.exp: Run new tests.
If we can dlopen an object then DF_STATIC_TLS is relevant.
* elf32-ppc.c (ppc_elf_check_relocs): Set DF_STATIC_TLS for PIEs too.
* elf64-ppc.c (ppc64_elf_check_relocs): Likewise.
for better packing. Removes a field and a flag that are never set.
bfd/
* bfd.c (struct bfd): Reorganise for better packing. Delete
"ifd" field. Make "format", "direction" and "flags" bitfields.
(HAS_LOAD_PAGE): Delete, renumber following flags.
* bfd-in2.h: Regenerate.
* coff-tic4x.c: Remove HAS_LOAD_PAGE from extra flags in target vecs.
binutils/
* objdump.c (dump_bfd_header): Don't print HAS_LOAD_PAGE.
The undefined function symbols (with non-zero value) on global entry
stubs are discarded by objdump when disassembling, so give objdump
another symbol to mark the stubs.
Also fixes a couple of bugs:
- entry_section was set to .opd for ELFv2, which meant a hard error
rather than a warning when _start wasn't defined.
- global entry stubs were not built if they were the only type of
stub in an executable.
bfd/
* elf64-ppc.c (ppc_stub_type): Add ppc_stub_global_entry.
(struct ppc_link_hash_table): Increase size of stub_count array.
(build_global_entry_stubs): Emit symbol on global entry stub.
(ppc64_elf_build_stubs): NULL check htab->brlt. Add global entry
stub stats.
ld/
* emultempl/ppc64elf.em (stub_added): Delete.
(gld${EMULATION_NAME}_finish): Call ppc64_elf_build_stubs even when
none of the usual stubs have been added. Only change entry_section
for ELFv1.
Makes the ld srec tests pass. Uses a horrible scan through symbols to
find ELF fields for symbol definitions, but the generic linker doesn't
offer anything better. Might be slow. Anyway, sane people will link
to ELF output then objcopy to convert formats.
* elf64-ppc.c (abiversion, set_abiversion): Move earlier.
(ppc64_elf_branch_reloc): Adjust addend for ELFv2 local offset.
(ppc64_elf_set_toc): Set ".TOC." symbol value when using
generic linker.
(ppc64_elf_relocate_section): Disable ELFv2 function entry
optimisation when --traditional-format.
* archures.c: add avrtiny architecture for avr target.
* bfd-in2.h: Regenerate.
* cpu-avr.c (arch_info_struct): add avrtiny arch info.
* elf32-avr.c (elf_avr_howto_table): new relocation R_AVR_LDS_STS_16
added for 16 bit LDS/STS instruction of avrtiny arch.
(avr_reloc_map): reloc R_AVR_LDS_STS_16 is mapped to
BFD_RELOC_AVR_LDS_STS_16.
(bfd_elf_avr_final_write_processing): select machine number avrtiny arch.
(elf32_avr_object_p): set machine number for avrtiny arch.
* libbfd.h: Regenerate.
* reloc.c: Add documentation for BFD_RELOC_AVR_LDS_STS_16 reloc.
* config/tc-avr.c (mcu_types): Add avrtiny arch.
Add avrtiny arch devices attiny4, attiny5, attiny9, attiny10, attiny20
and attiny40.
(md_show_usage): Add avrtiny arch in usage message.
(avr_operand): validate and issue error for invalid register for avrtiny.
add new reloc exp for 16 bit lds/sts instruction.
(md_apply_fix): check 16 bit lds/sts operand for out of range and encode.
(md_assemble): check ISA for arch and issue diagnostic.
* include/elf/avr.h (E_AVR_MACH_AVRTINY): define avrtiny machine number.
(R_AVR_LDS_STS_16): define 16 bit lds/sts reloc number.
* include/opcode/avr.h (AVR_ISA_TINY): define avrtiny specific ISA.
(AVR_ISA_2xxxa): define ISA without LPM.
(AVR_ISA_AVRTINY): define avrtiny arch ISA.
Add doc for contraint used in 16 bit lds/sts.
Adjust ISA group for icall, ijmp, pop and push.
Add 16 bit lds/sts encoding and update 32 bit lds/sts constraints.
* opcodes/avr-dis.c (avr_operand): Handle constraint j for 16 bit lds/sts.
(print_insn_avr): do not select opcode if insn ISA is avrtiny and machine
is not avrtiny.
* Makefile.am (ALL_EMULATION_SOURCES): add avrtiny emulation source.
(eavrtiny.c): add rules for avrtiny emulation source.
* Makefile.in: Regenerate.
* configure.tgt: Add avrtiny to avr target emulations.
* scripttempl/avrtiny.sc: New file.
linker script template for avrtiny arch.
* emulparams/avrtiny.sh: New file.
emulation parameters for avrtiny arch.
information, specifically a DW_AT_MIPS_linkage_name attribute that has a numeric
value rather than a string value.
PR binutils/16949
* dwarf2.c (is_str_attr): New function.
(find_abstract_instance_name): Use it to determine when an
attribute has a string value.
Prior to 93d1b056 _SDA_BASE_ used to be defined in a linker script
output section. Now _SDA_BASE_ is defined in an input section that is
subject to being stripped. If the section is stripped we don't output
the symbol, which results in --emit-relocs trying to emit relocs with
dangling references to _SDA_BASE_.
* elf32-ppc.c (ppc_elf_size_dynamic_sections): Arrange to keep
.sdata/.sdata2 when _SDA_BASE_/_SDA2_BASE_ should be output
for --emit-relocs.
other architectures when we emit IE relocs in a shared library.
* elf32-arm.c (elf32_arm_check_relocs): Set DF_STATIC_TLS when
emitting initial-exec relocs when not linking an executable.
Combining TLS descriptors and GNU indirect functions in the same
object could lead to assertions or multiple dynamic relocations
for the same GOT slot. Fix the bookkeeping so this doesn't happen.
This allows building and make checking glibc with -mtls-dialect=gnu2.
bfd/ChangeLog:
2014-06-16 Will Newton <will.newton@linaro.org>
* elf32-arm.c (elf32_arm_allocate_plt_entry): Increment
htab->next_tls_desc_index in the non-IPLT case.
Calculate GOT offset correctly for the non-IPLT case.
(allocate_dynrelocs_for_symbol): Don't increment
htab->next_tls_desc_index here.
ld/testsuite/ChangeLog:
2014-06-16 Will Newton <will.newton@linaro.org>
* ld-arm/arm-elf.exp: Add ifunc-gdesc test.
* ld-arm/ifunc-gdesc.r: New file.
* ld-arm/ifunc-gdesc.s: Likewise.
* ld-arm/ifunc-gdesc.ver: Likewise.
Cures these failures with MALLOC_PERTURB_=1
FAIL: GOT test (executable)
FAIL: GOT test (shared library)
FAIL: VAX export class call relocation test
FAIL: VAX export class data relocation test
* elf32-vax.c (elf_vax_size_dynamic_sections): Clear linker
created sections.
There are legitimate reasons to allow a signed value in a cmpli insn
field, for example to test for a "stw r1,lock@sdarel(r13)" instruction
in user code, a kernel might use
subis r3,r3,STW_R1_0R13@ha # subtract off high part
cmplwi r3,lock@sdarel # is low part accessing lock?
Since the lock@sdarel may take a range of -32768 to 32767,
the allowed range of cmpli immediate must be at least [-32768,65535].
bfd/
* elf32-ppc.c (ppc_elf_relocate_section): Treat field of cmpli
insn as a bitfield; Use complain_overflow_bitfield.
* elf64-ppc.c (ppc64_elf_relocate_section): Likewise.
opcodes/
* ppc-opc.c (UISIGNOPT): Define and use with cmpli.
gas/
* config/tc-ppc.c (ppc_insert_operand): Handle PPC_OPERAND_SIGNOPT
on unsigned fields. Comment on PPC_OPERAND_SIGNOPT signed fields
in 64-bit mode.
gold/
* powerpc.cc (relocate): Treat field of cmpli insn as a bitfield.
The goal of this patch is to provide an easy way to make
--disable-werror the default when building binutils, or the parts
of binutils that need to get built when building GDB. In development
mode, we want to continue making -Werror the default with GCC.
But, when making releases, I think we want to make it as easy as
possible for regular users to successfully build from sources.
GDB already has this kind of feature to turn -Werror as well as
the use of the libmcheck library. As GDB Release Manager, I take
advantage of it to turn those off after having cut the branch.
I'd like to be able to do the same for the binutils bits. And
perhaps Tristan will want to do the same for his releases too
(not sure, binutils builders might be a little savvier than GDB
builders).
This patch introduces a new file, called development.sh, which
just sets a variable called $development. In our development branches
(Eg. "master"), it's set to true. But setting it to false would allow
us to change the default behavior of various development-related
features to be turned off; in this case, it turns off the use of
-Werror by default (use --enable-werror to turn it back on).
bfd/ChangeLog:
* development.sh: New file.
* warning.m4 (AM_BINUTILS_WARNINGS): Source bfd/development.sh.
Make -Werror the default with GCC only if DEVELOPMENT is true.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add
$(srcdir)/development.sh.
* Makefile.in, configure: Regenerate.
binutils/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gas/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gold/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): New.
* Makefile.in, configure: Regenerate.
gprof/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
ld/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
opcodes/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gdb/ChangeLog:
* development.sh: Delete.
* Makefile.in (config.status): Adjust dependency on development.sh.
* configure.ac: Adjust development.sh source call.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
* configure.ac: Adjust development.sh source call.
* Makefile.in (config.status): Adjust dependency on development.sh.
* configure: Regenerate.
Tested on x86_64-linux by building two ways: One with DEVELOPMENT
set to true, and one with DEVELOPMENT set to false. In the first
case, I could see the use of -Werror, while it disappeared in
the second case.
Add an assert and remove an unused line of code.
bfd/ChangeLog:
2014-06-04 Will Newton <will.newton@linaro.org>
* elfnn-aarch64.c (tpoff_base): Make test of tls_sec
being non-NULL into an assert.
(elfNN_aarch64_tls_relax): Remove unused code.
out that the section is supposed to be page-aligned, but the newly merged
section was not being padded out to a page boundary. This meant that when
the executable was stripped a badly sized .rsrc section was written out.
PR ld/16807
* peXXigen.c (rsrc_process_section): Page align the new contents
befgore writing out.
Power8 fuses addis,addi and addis,ld sequences when the target of the
addis is the same as the addi/ld. Thus
addis r12,r2,xxx@ha
addi r12,r12,xxx@l / ld r12,xxx@l(r12)
is faster than
addis r11,r2,xxx@ha
addi r12,r11,xxx@l / ld r12,xxx@l(r11)
So use the form that allows fusion in plt call and branch stubs.
bfd/
* elf64-ppc.c (ADDIS_R12_R2): Define.
(build_plt_stub): Support fusion on ELFv2 stub.
(ppc_build_one_stub): Likewise for plt branch stubs.
gold/
* powerpc.cc (addis_12_2): Define.
(Stub_table::do_write): Support fusion on ELFv2 stubs.
ld/testsuite/
* ld-powerpc/elfv2exe.d: Update for changed plt call stubs.
gdb/
* ppc64-tdep.c (ppc64_standard_linkage8): New.
(ppc64_skip_trampoline_code): Recognise ELFv2 stub supporting fusion.
2014-05-28 Tristan Gingold <gingold@adacore.com>
* dwarf2.c (lookup_address_in_function_table): Add best_fit_len
to keep the length of the best fit range.
(lookup_symbol_in_function_table, info_hash_lookup_funcinfo):
Likewise.
1) _SDA_BASE_ and _SDA2_BASE_ and defined automatically, in a similar
manner to the way _GLOBAL_OFFSET_TABLE_ is handled. It's a little
more complicated to remove the symbols because _SDA_BASE_ needs to
be there if either .sdata or .sbss is present, and similarly for
_SDA2_BASE.
2) The linker created .sdata and .sdata2 sections used for
R_PPC_EMB_SDAI16 and R_PPC_EMB_SDA2I16 pointers are created early.
Nowadays we strip unneeded sections from the output, so it isn't
necessary to delay creating the sections.
3) The output section for targets of various SDA relocs is now checked
as per the ABI(s). We previously allowed .sdata.foo and similar,
most likely because at some stage we were checking input sections.
Also, the patch fixes a long-standing bug in size_input_sections
that affects the values of symbols defined in stripped input
sections.
PR 16952
bfd/
* elf32-ppc.c (ppc_elf_create_linker_section): Move earlier.
Remove redundant setting of htab->elf.dynobj. Don't align.
Define .sdata symbols using _bfd_elf_define_linkage_sym.
(ppc_elf_create_glink): Call ppc_elf_create_linker_section.
(create_sdata_sym): Delete.
(elf_allocate_pointer_linker_section): Rename from
elf_create_pointer_linker_section. Align section.
(ppc_elf_check_relocs): Don't call ppc_elf_creat_linker_section
directly here, or create_sdata_sym. Set ref_regular on _SDA_BASE_
and _SDA2_BASE_.
(ppc_elf_size_dynamic_sections): Remove ATTRIBUTE_UNUSED on param.
Remove unnecessary tests on _SDA_BASE_ sym.
(maybe_strip_sdasym, ppc_elf_maybe_strip_sdata_syms): New functions.
(ppc_elf_relocate_section): Tighten SDA reloc symbol section checks.
* elf32-ppc.h (ppc_elf_set_sdata_syms): Delete.
(ppc_elf_maybe_strip_sdata_syms): Declare.
ld/
* emulparams/elf32ppccommon.sh (_SDA_BASE_, _SDA2_BASE_): Delete.
* emultempl/ppc32elf.em (ppc_before_allocation): Call
ppc_elf_maybe_strip_sdata_syms.
* ldlang.c (size_input_section): Correct output_offset value
for excluded input sections.
original patches were posted:
pe/coff: Display GUID build-id in the conventional way
pe/coff: Don't interpret debug directory in section with no contents
pe/coff: Keep .build-id with --only-keep-debug
pe/coff: Don't break .build-id with objcopy/strip
* peXXigen.c (pe_print_debugdata): Don't interpret debug directory
in a section with no contents.
(is_vma_in_section, find_section_by_vma): New functions.
(_bfd_XX_bfd_copy_private_bfd_data_common): Recalculate file
offsets in the debug directory.
(_bfd_XXi_slurp_codeview_record, _bfd_XXi_write_codeview_record):
Byte-swap GUID from little-endian to big-endian order for
consistent and conventional display.
* objcopy.c (is_nondebug_keep_contents_section): New function.
(setup_section): Use it.
or 64-bit doubles. It also makes the linker complain if the user attempts
to link together binaries with different sized doubles.
* elf32-rl78.c (rl78_elf_merge_private_bfd_data): Complain if
64-bit doubles objects mix with 32-bit doubles objects.
(rl78_elf_print_private_bfd_data): Describe 64-bit doubles flag.
* readelf.c (get_machine_flags): Handle RL78 64-bit doubles flag.
* config/tc-rl78.c (enum options): Add OPTION_32BIT_DOUBLES
and OPTION_64BIT_DOUBLES.
(md_longopts): Add -m32bit-doubles and -m64bit-doubles.
(md_parse_option): Parse -m32bit-doubles and -m64bit-doubles.
(md_show_usage): Show all of the RL78 options.
(rl78_float_cons): New static functions.
(md_pseudo_table): Update handler for "double".
R_XTENSA_DIFF relocation offsets are in fact signed. Treat them as such.
Add testcase that examines ld behaviour on R_XTENSA_DIFF relocation
changing sign during relaxation.
2014-05-02 Volodymyr Arbatov <arbatov@cadence.com>
David Weatherford <weath@cadence.com>
Max Filippov <jcmvbkbc@gmail.com>
bfd/
* elf32-xtensa.c (relax_section): treat R_XTENSA_DIFF* relocations as
signed.
gas/
* config/tc-xtensa.c (md_apply_fix): mark BFD_RELOC_XTENSA_DIFF*
fixups as signed.
ld/testsuite/
* ld-xtensa/diff_overflow.exp, * ld-xtensa/diff_overflow1.s,
* ld-xtensa/diff_overflow2.s: Add test for DIFF* relocation
signedness and overflow checking.
This patch firstly adds support for mips32r3 mips32r5, mips64r3
and mips64r5. Secondly it adds support for the eretnc instruction.
ChangeLog:
bfd/
* aoutx.h (NAME (aout, machine_type)): Add mips32r3, mips64r3,
mips32r5 and mips64r5.
* archures.c (bfd_architecture): Likewise.
* bfd-in2.h (bfd_architecture): Likewise.
* cpu-mips.c (arch_info_struct): Likewise.
* elfxx-mips.c (mips_set_isa_flags): Likewise.
gas/
* tc-mips.c (ISA_SUPPORTS_MIPS16E): Add mips32r3, mips32r5, mips64r3
and mips64r5.
(ISA_HAS_64BIT_FPRS): Likewise.
(ISA_HAS_ROR): Likewise.
(ISA_HAS_ODD_SINGLE_FPR): Likewise.
(ISA_HAS_MXHC1): Likewise.
(hilo_interlocks): Likewise.
(md_longopts): Likewise.
(ISA_HAS_64BIT_REGS): Add mips64r3 and mips64r5.
(ISA_HAS_DROR): Likewise.
(options): Add OPTION_MIPS32R3, OPTION_MIPS32R5, OPTION_MIPS64R3, and
OPTION_MIPS64R5.
(mips_isa_rev): Add support for mips32r3, mips32r5, mips64r3 and
mips64r5.
(md_parse_option): Likewise.
(s_mipsset): Likewise.
(mips_cpu_info_table): Add entries for mips32r3, mips32r5, mips64r3
and mips64r5. Also change p5600 entry to be mips32r5.
* configure.in: Add support for mips32r3, mips32r5, mips64r3 and
mips64r5.
* configure: Regenerate.
* doc/c-mips.texi: Document the -mips32r3, -mips32r5, -mips64r3 and
-mips64r5 command line options.
* doc/as.texinfo: Likewise.
gas/testsuite/
* gas/mips/mips.exp: Add MIPS32r5 tests. Also add the mips32r3,
mips32r5, mips64r3 and mips64r5 isas to the testsuite.
* gas/mips/r5.s: New test.
* gas/mips/r5.d: Likewise.
include/opcode/
* mips.h (INSN_ISA_MASK): Updated.
(INSN_ISA32R3): New define.
(INSN_ISA32R5): New define.
(INSN_ISA64R3): New define.
(INSN_ISA64R5): New define.
(INSN_ISA64, INSN_ISA64R2, INSN_ISA3_32, INSN_ISA3_32R2, INSN_ISA4_32
INSN_ISA4_32R2, INSN_ISA5_32R2): Renumbered.
(mips_isa_table): Add entries for mips32r3, mips32r5, mips64r3 and
mips64r5.
(INSN_UPTO32R3): New define.
(INSN_UPTO32R5): New define.
(INSN_UPTO64R3): New define.
(INSN_UPTO64R5): New define.
(ISA_MIPS32R3): New define.
(ISA_MIPS32R5): New define.
(ISA_MIPS64R3): New define.
(ISA_MIPS64R5): New define.
(CPU_MIPS32R3): New define.
(CPU_MIPS32R5): New define.
(CPU_MIPS64R3): New define.
(CPU_MIPS64R5): New define.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Add MIPS32r5 eretnc instruction.
(I34): New define.
(I36): New define.
(I66): New define.
(I68): New define.
* mips-dis.c (mips_arch_choices): Add mips32r3, mips32r5, mips64r3 and
mips64r5.
(parse_mips_dis_option): Update MSA and virtualization support to
allow mips64r3 and mips64r5.
* elfxx-mips.h (elfxx-mips.h): Declare.
* elfxx-mips.c (mips_elf_merge_obj_attributes): Use it to report
Tag_GNU_MIPS_ABI_FP mismatches.
(_bfd_mips_fp_abi_string): New function.
of address.
(mmo_write_chunk): When handling data remainder, assert that
previous remaining data is flushed.
(mmo_write_loc_chunk): Only look for trailing and leading zeros
when dealing with an aligned VMA and for aligned lengths. Don't skip
the last 32-bit-word of zeros.
(mmo_write_loc_chunk): Emit an error if the VMA is not aligned.
(mmo_scan) <case LOP_QUOTE>: Move re-alignment of vma before
emitting data, not after updating it.
<case LOP_LOC>: Call mmo_decide_section with aligned vma.
thought that an uncompressed .debug_str section was compressed.
* compress.c (bfd_is_section_compressed): When checking the
.debug_str section, also check the fifth byte in the section is
not part of a string.
* binutils-all/debug_str.s: New test.
* binutils-all/debug_str.d: New test control file.
* binutils-all/compress.exp: Run debug_str test.
This is all we should need to be able to run the eh_frame parts of
bfd_elf_discard_info before bfd_elf_size_dynamic_sections
* elf-eh-frame.c (struct cie.personality): Replace val with sym.
(find_merged_cie): Identify personality functions by (bfd_id,index)
pair when a local sym is used.
Outgoing section for relocations was computed by setting a shared
pointer to which section should be used. For TLS this was overriden to
use .rela.got since they use GOT entries but since the pointer is per
section that whole section was relocated to .rela.got, even non-TLS
relocations.
* elf32-or1k.c: Fix a bug where non-TLS relocations would be forced
into .rela.got if it contained TLS relocations as well.
versions of gcc complain about part of a conditional expression always
evaluating to false because of the size of the operands involved, even when
the entire expression is already known to be false.
* peXXigen.c (_bfd_XXi_swap_sym_out): Another fix for building on
a 342-bit host. This time for older versions of gcc.
This teaches the DWARF2 find_line functions how to deal with separate
debug relocatable object files. Also fixes a major bug:
When _bfd_dwarf2_slurp_debug_info was split out, place_sections ran
after .debug_info was relocated. This defeated the whole purpose of
place_sections. See the comment I added before place_sections.
Fixes some minor bugs too:
- place_sections didn't set VMA for alloc but non-load sections (bss).
- zero size sections can have symbols, so they need their VMA set too.
- last_vma was incorrectly adjusted.
- my last change to place_sections left VMA unchanged for .debug_info
when the linker has mapped input to output sections, but this is
wrong since bfd_simple_get_relocated_section_contents unmaps debug
sections.
PR 16867
* dwarf2.c: Formatting.
(struct dwarf2_debug): Make adjusted_section_count signed.
(unset_sections): Make i signed.
(set_debug_vma): New function.
(place_sections): Handle separate debug object file. Set VMA
on debug sections, even if they have an output section. Also
set VMA on zero size sections, and non-load but alloc sections.
Set adjusted_section_count to -1 when no section adjustment.
Malloc adjusted_sections. Don't double last_vma. Transfer
alloc section VMAs to separate debug file.
(_bfd_dwarf2_cleanup_debug_info): Free adjusted_sections.
(_bfd_dwarf2_slurp_debug_info): Add do_place parameter. Drop
test on symbols being the same before using old stash. Read
and use separate debug file symbols. Call place_sections.
(find_line): Don't call place_sections here.
* libbfd-in.h (_bfd_dwarf2_slurp_debug_info): Update proto.
* libbfd.h: Regenerate.
* mach-o.c (bfd_mach_o_find_nearest_line): Adjust
_bfd_dwarf2_slurp_debug_info call.
* simple.c (simple_save_output_info): Clarify comment.
1. Strings (and then resource data) must follow immediately after
the end of the tables.
2. Units of resource data must be 8-byte aligned.
PR ld/16807
* peXXigen.c (struct rsrc_regions): New structure.
(rsrc_print_resource_directory): Use new structure. Include
offset of directory in listing.
(rsrc_print_resource_entry): Likewise.
(rsrc_print_section): Likewise.
(rsrc_count_entries): Do not increment sizeof_strings or
sizeof_leaves.
(rsrc_count_directory): Do not increment sizeof_tables.
(rsrc_compute_region_sizes): New function.
(rsrc_write_leaf): Maintain 8-byte alignment for resource data.
(rsrc_process_section): Compute size of regions after merging
entries.
Throw away the dwarf2 stash if it becomes invalid due to section
VMAs changing. It would be nice to reclaim all the bfd_alloc
memory here when we throw away the stash, perhaps by putting
everything we alloc on a private dwarf2 objalloc, but I haven't done
that with this patch.
I've also fixed a problem with bfd_perform_relocation losing reloc
addends, which meant a second or subsequent look at debug info
sections did not properly relocate the sections. I can't see why
bfd_perform_relocation should need to change addends except for ld -r,
and the history (985fca12, e98e6ec1) doesn't help much.
Finally, the patch tweaks place_sections to avoid unnecessary work.
If we've mapped input to output sections, then input section VMA
isn't used so there's not much point in adjusting it. Incidentally,
this also means place_sections isn't effective in all cases.
PR ld/16787
* dwarf2.c (struct dwarf2_debug): Add sec_vma field.
(place_sections): Do not modify VMA of sections when called from
linker after sections have been placed in output sections. Short
circuit single section case.
(save_section_vma, section_vma_same): New functions.
(_bfd_dwarf2_slurp_debug_info): Throw away stash if section VMAs
change.
* reloc.c (bfd_perform_relocation): Do not modify reloc addend
when non-relocatable.
This function seems to be a left over from some previous
functionality that no longer exists - the comment above seems to
make no sense with the current code. Remove the function as it
breaks handling of SystemTap static probe note sections.
bfd/ChangeLog:
2014-04-22 Will Newton <will.newton@linaro.org>
* elfnn-aarch64.c (elfNN_aarch64_section_flags): Remove
function. (elf_backend_section_flags): Remove define.
ld/
* emultempl/alphaelf.em (alpha_after_parse): Enable 2 relax passes.
bfd/
* elf64-alpha.c (elf64_alpha_size_got_sections): New may_merge
parameter; honor it and disable got merging when false.
(elf64_alpha_relax_got_load): Do not relax to GPREL relocs during
the first pass of relaxation.
(elf64_alpha_relax_with_lituse): Likewise. Move relaxed relocs to
the end of the LITERAL+LITUSE chain.
(elf64_alpha_relax_section): Only process LITERAL relocs during the
second pass of relaxation.
bfd/
* mach-o.h (bfd_mach_o_dyld_info_command): Add rebase_content,
bind_content, weak_bind_content, lazy_bind_content,
export_content.
(bfd_mach_o_load_command): Add comments, add next field.
(mach_o_data_struct): Replace commands field by first_command
and last_command.
* mach-o.c (bfd_mach_o_append_command): New function.
(bfd_mach_o_bfd_copy_private_symbol_data): Add blank lines.
(bfd_mach_o_bfd_copy_private_section_data): Check flavour,
copy fields.
(bfd_mach_o_bfd_copy_private_header_data): Copy load commands.
(bfd_mach_o_pad4, bfd_mach_o_pad_command): New functions.
(bfd_mach_o_write_thread): Use macro instead of literal.
(bfd_mach_o_write_dylinker, bfd_mach_o_write_dylib)
(bfd_mach_o_write_main, bfd_mach_o_write_dyld_info): New
functions.
(bfd_mach_o_write_symtab_content): New function (extracted
from bfd_mach_o_write_symtab).
(bfd_mach_o_write_symtab): Split.
(bfd_mach_o_count_indirect_symbols): Move
(bfd_mach_o_build_dysymtab): Remove layout code.
(bfd_mach_o_write_contents): Rewritten to build commands in order.
(bfd_mach_o_count_sections_for_seg): Remove.
(bfd_mach_o_build_obj_seg_command): New function (extracted from
bfd_mach_o_build_seg_command).
(bfd_mach_o_build_exec_seg_command): New function.
(bfd_mach_o_build_dysymtab_command): Remove.
(bfd_mach_o_layout_commands): New function.
(bfd_mach_o_init_segment): New function.
(bfd_mach_o_build_commands): Major rework to handle non-object
files.
(bfd_mach_o_alloc_and_read, bfd_mach_o_read_dyld_content): New
function.
(bfd_mach_o_read_dyld_info): Clear content fields.
(bfd_mach_o_read_segment): Adjust call.
(bfd_mach_o_flatten_sections): Adjust as now load commands are
chained.
(bfd_mach_o_scan_start_address, bfd_mach_o_scan)
(bfd_mach_o_mkobject_init, bfd_mach_o_get_base_address)
(bfd_mach_o_lookup_command, bfd_mach_o_core_fetch_environment):
Likewise.
binutils/
* od-macho.c (dump_section_map): Adjust as load commands
are now chained.
(dump_load_command, dump_section_content): Likewise.
be placed towards the front of local GOT space, while entries addressed
via a 32-bit index are placed towards the rear.
Provided that there are fewer than ~16K local GOT entries addressed via
a 16-bit index in total, this should eliminate any relocation overflows
caused by such GOT entries being allocated beyond the addressable range.
bfd/
* elfxx-mips.c (struct mips_got_info): Delete assigned_gotno
field. Add assigned_low_gotno and assigned_high_gotno fields.
(mips_elf_create_local_got_entry): Update out-of-space condition.
Set index of new GOT entry to assigned_low_gotno if required by
the current relocation, else set it to assigned_high_gotno.
(mips_elf_set_global_gotidx): Replace uses of assigned_gotno
with assigned_low_gotno.
(mips_elf_multi_got): Initialize assigned_low_gotno and
assigned_high_gotno in secondary GOTs. Use assigned_low_gotno
in place of assigned_gotno when handling global GOT entries.
(mips_elf_lay_out_got): Initialize assigned_low_gotno and
assigned_high_gotno.
(_bfd_mips_elf_finish_dynamic_sections): Account for a possible
gap in the middle of local GOT space.
ld/testsuite/
* ld-mips-elf/elf-rel-xgot-n32.d: Update for new GOT layout.
* ld-mips-elf/elf-rel-xgot-n32-embed.d: Likewise.
* ld-mips-elf/elf-rel-xgot-n64.d: Likewise.
* ld-mips-elf/elf-rel-xgot-n64-embed.d: Likewise.
* ld-mips-elf/elf-rel-xgot-n64-linux.d: Likewise.
PR 16846
* elflink.c (_bfd_elf_merge_symbol): Ignore TLS mismatch when
current bfd is a plugin. Don't always set type_change_ok
when old bfd is a plugin.
The AArch64 TLSDESC to IE relaxation code uses a bit mask intended to
ensure that destination register in a relaxed ldr instruction is
always X0. The mask has an off by one error resulting in the most
significant bit of the destination register being retained in the
relaxed instruction. The issue generally appears when the compiler
emits TLS accesses code under high register pressure resulting in a
broken code sequence.
Fuss over bctr in call stubs.
* elf32-ppc.c (BA): Define
(ppc_elf_link_hash_table_create): Correct default_params.
(write_glink_stub): Pad small plt call stub with "ba 0" rather
than "nop" for ppc476_workaround.
(ppc_elf_finish_dynamic_sections): Likewise for branch table
and __glink_PLTresolve. Ensure plt call stub at end of page
doesn't allow fall-thru prefetch.
converts some address expressions into absolute values, but the PE format
only stores absolutes as 32-bits. This is a partial solution which attempts
to convert such absolute values back to section relative ones instead. It
fails for symbols like __image_base and ImageBase__, but it is unclear as to
whether these values are ever actually used by applications.
PR ld/16821
* peXXigen.c (abs_finder): New function.
(_bfd_XXi_swap_sym_out): For absolute symbols with values larger
than 1^32 try to convert them into section relative values
instead.
I got the ppc476 workaround wrong. bctr (and bctrl) as the last
instruction in a page can hit the icache bug if the preceding mtctr
insn is close by, and the destination is in the first few instructions
on the next page. This scenario can occur with code generated by gcc
to implement switch statements, or in code generated to call by
function pointer.
To prevent the bctr problem it is also necessary to remove other
instructions that otherwise would be safe.
bfd/
* elf32-ppc.c (ppc_elf_relocate_section): Remove bctr from list
of safe ppc476 insns at end of page. Also remove non-branch insns.
Expand comments.
ld/
* emultempl/ppc32elf.em (no_zero_padding, ppc_finish): New functions.
(LDEMUL_FINISH): Define.
The testcase in pr16417 comment #6 produces a map file showing
libpthread.so.0 (write@@GLIBC_2.2.5)
ie. missing the file referencing the symbol.
* elflink.c (_bfd_elf_add_default_symbol): Pass poldbfd when
merging non-default sym.
bfd/
* mach-o-i386.c (bfd_mach_o_i386_swap_reloc_out): Use target index
of output_section.
* mach-o-x86-64.c (bfd_mach_o_x86_64_swap_reloc_out): Ditto.
section before dereferencing.
(pe_print_idata, pe_print_edata, pe_print_reloc)
(rsrc_print_section): Don't bother interpreting the contents
of sections which have no contents.
long type instead of long long meant that bfd_seek (SET) could be called with a
negative offset.
PR ld/16803
* elf.c (_bfd_elf_set_section_contents): Use correct type to hold
file position.
When a VDSO gets large enough that it doesn't entirely fit in one page,
but not so large that the part described by the program header exceeds
one page, then gdb/BFD doesn't read the section headers and symbol
table information. This patch cures that by passing the size of the
vdso to BFD, and fixes a number of other issues in the BFD code.
bfd/
* elfcode.h (bfd_from_remote_memory): Add "size" parameter.
Consolidate code handling possible section headers past end of
segment. Don't use p_align for page size guess, instead use
minpagesize. Take note of ld.so clearing section headers when
p_memsz > p_filesz. Handle file header specifying no section
headers. Handle zero p_align throughout. Default loadbase to
zero. Add comments. Rename contents_size to high_offset, and
make it a bfd_vma. Delete unnecessary bfd_set_error calls.
* bfd-in.h (bfd_elf_bfd_from_remote_memory): Update prototpe.
* elf-bfd.h (struct elf_backend_data <elf_backend_from_remote_memory>):
Likewise.
(_bfd_elf32_bfd_from_remote_memory): Likewise.
(_bfd_elf64_bfd_from_remote_memory): Likewise.
* elf.c (bfd_elf_bfd_from_remote_memory): Adjust.
* bfd-in2.h: Regnerate.
gdb/
* symfile-mem.c (symbol_file_add_from_memory): Add size parameter.
Pass to bfd_elf_bfd_from_remote_memory. Adjust all callers.
(struct symbol_file_add_from_memory_args): Add size field.
(find_vdso_size): New function.
(add_vsyscall_page): Attempt to find vdso size.
produce spurious errors about truncated relocations. The relocations are
only truncated because they are being made against sections which are going
to be discarded so that base address is zero instead of the expected 64-bit
base value.
* cofflink.c (_bfd_coff_generic_relocate_section): Skip
relocations in discarded sections.
ELFv2 needs to create plt entries in a non-PIC executable for an
address reference to a function defined in a shared object. It's
possible that an object file has no features that distinguish it as
ELFv1 or ELFv2, eg. an object only containing data. Such files need
to be handled like those that are known to be ELFv2.
However, this unnecessarily creates plt entries for the analogous
ELFv1 case, so arrange to set output abi version earlier, and use the
output abi version to further distinguish ambiguous input files.
bfd/
* elf64-ppc.c (ppc64_elf_check_relocs): Account for possibly
needed plt entries when taking the address of functions for
abiversion == 0 (ie. unknown) as well as abiversion == 2.
Move opd setup and abiversion checks to..
(ppc64_elf_before_check_relocs): ..here. Renamed from
ppc64_elf_process_dot_syms. Set output abiversion from input and
input abiversion from output, if either is not set.
(ppc64_elf_merge_private_bfd_data): Don't merge flags here.
(elf_backend_check_directives): Update.
ld/testsuite/
* ld-powerpc/startv1.s, * ld-powerpc/startv2.s, * ld-powerpc/funref.s,
* ld-powerpc/funv1.s, * ld-powerpc/funv2.s,
* ld-powerpc/ambiguousv1.d, * ld-powerpc/ambiguousv2.d: New test files.
* ld-powerpc/powerpc.exp: Run new tests.
The current code subtracts the size of the output section containing
relplt from RELASZ. In some cases this will be the same output
section as the dynamic relocs causing a value of zero to be output.
Calculating the size from input sections seems to make more sense.
bfd/ChangeLog:
2014-03-25 Will Newton <will.newton@linaro.org>
* elfnn-aarch64.c (elfNN_aarch64_finish_dynamic_sections):
Set value of DT_PLTRELSZ and DT_RELASZ based on the size
of input sections rather than output sections.
ld/testsuite/ChangeLog:
2014-03-25 Will Newton <will.newton@linaro.org>
* ld-aarch64/aarch64-elf.exp: Add relasz dump test.
* ld-aarch64/relasz.d: New file.
* ld-aarch64/relasz.s: Likewise.
Unless pointer_equality_needed is set then set st_value to be zero
for undefined symbols.
bfd/ChangeLog:
2014-03-20 Will Newton <will.newton@linaro.org>
PR ld/16715
* elf32-arm.c (elf32_arm_check_relocs): Set
pointer_equality_needed for absolute references within
executable links.
(elf32_arm_finish_dynamic_symbol): Set st_value to zero
unless pointer_equality_needed is set.
ld/testsuite/ChangeLog:
2014-03-20 Will Newton <will.newton@linaro.org>
* ld-arm/ifunc-14.rd: Update symbol values.
should work for all types of input .rsrc section.
* peXXigen.c (rsrc_process_section): Add code to scan input
sections and record their lengths. Use these lengths to find the
start of each merged .rsrc section.
* scripttempl/pe.sc (R_RSRC): Fix default-manifest exclusion.
(.rsrc): Add SUBALIGN(4). Remove SORT.
* scripttempl/pep.sc: Likewise.
bfd/
* peicode.h (pe_ILF_object_p): Adjust, as the version number
has been read.
(pe_bfd_object_p): Also read version number to detect ILF.
* pe-x86_64.c (COFF_WITH_PE_BIGOBJ): Define.
(x86_64pe_bigobj_vec): Define
* coffcode.h (bfd_coff_backend_data): Add _bfd_coff_max_nscns field.
(bfd_coff_max_nscns): New macro.
(coff_compute_section_file_positions): Use unsigned int for
target_index. Compare with bfd_coff_max_nscns.
(bfd_coff_std_swap_table, ticoff0_swap_table, ticoff1_swap_table):
Set a value for _bfd_coff_max_nscns.
(header_bigobj_classid): New constant.
(coff_bigobj_swap_filehdr_in, coff_bigobj_swap_filehdr_out)
(coff_bigobj_swap_sym_in, coff_bigobj_swap_sym_out)
(coff_bigobj_swap_aux_in, coff_bigobj_swap_aux_out): New
functions.
(bigobj_swap_table): New table.
* libcoff.h: Regenerate.
* coff-sh.c (bfd_coff_small_swap_table): Likewise.
* coff-alpha.c (alpha_ecoff_backend_data): Add value for
_bfd_coff_max_nscns.
* coff-mips.c (mips_ecoff_backend_data): Likewise.
* coff-rs6000.c (bfd_xcoff_backend_data)
(bfd_pmac_xcoff_backend_data): Likewise.
* coff64-rs6000.c (bfd_xcoff_backend_data)
(bfd_xcoff_aix5_backend_data): Likewise.
* targets.c (x86_64pe_bigobj_vec): Declare.
* configure.in (x86_64pe_bigobj_vec): New vector.
* configure: Regenerate.
* config.bfd: Add bigobj object format for Windows targets.
gas/
* config/tc-i386.c (use_big_obj): Declare.
(OPTION_MBIG_OBJ): Define.
(md_longopts): Add -mbig-obj option.
(md_parse_option): Handle it.
(md_show_usage): Display help for this option.
(i386_target_format): Use bigobj for x86-64 if -mbig-obj.
* doc/c-i386.texi: Document the option.
gas/testsuite/
* gas/pe/big-obj.d, gas/pe/big-obj.s: Add test.
* gas/pe/pe.exp: Add test.
include/coff/
* pe.h (struct external_ANON_OBJECT_HEADER_BIGOBJ): Declare.
(FILHSZ_BIGOBJ): Define.
(struct external_SYMBOL_EX): Declare.
(SYMENT_BIGOBJ, SYMESZ_BIGOBJ): Define.
(union external_AUX_SYMBOL_EX): Declare.
(AUXENT_BIGOBJ, AUXESZ_BIGOBJ): Define.
* internal.h (struct internal_filehdr): Change type
of f_nscns.
an ARM ELF binary into an AARCH64 ELF executable.
PR ld/16671
* elf32-arm.c (elf32_arm_add_symbol_hook): Check for ARM format
before testing for vxworks.
copy_elf_program_header has logic to reject non-alloc sections when
calculating p_vaddr offset for padding, but blithely assumed the
first section in a segment was allocated.
PR 16690
* elf.c (copy_elf_program_header): Ignore first section lma if
non-alloc.
coffcode.h uses an intptr_t cast inside an #ifdef RS6000COFF_C, so
ensure that intptr_t is defined. We don't see this when
cross-compiling from linux due to intptr_t being provided by
unistd.h.
PR 16686
* coff-rs6000.c: Include stdint.h.
* coff64-rs6000.c: Likewise.
Similar to the powerpc64 patch, this improves overflow checking in
elf32-ppc.c. Many reloc "howto" entries needed fixes, some just
cosmetic.
The patch also fixes the R_PPC_VLE_SDA21 reloc application code, which
was horribly broken. In fact, it may still be broken since Power ISA
2.07 says e_li behaves as
RT <- EXTS(li20 1:4 || li20 5:8 || li20 0 || li20 9:19)
where li20 is a field taken from bits 17..20, 11..15, 21..31 of the
instruction. Freescale VLEPEM says differently, and I assume
correctly, that
RT <- EXTS(li20 0:3 || li20 4:8 || li20 9:19)
The VLE_SDA21 relocation description matches this too.
Now the VLE_SDA21 relocation specifies in the case where e_addi16 is
converted to e_li for symbols in .PPC.EMB.sdata0 or .PPC.EMB.sbss0
(no base register), that the field is restricted to 16 bits, with the
sign bit being propagated to the top 4 bits. I don't see the sense in
restricting the value like this, so have allowed the full 20 bit
signed value. This of course is compatible with the reloc description
in that values in the 16 bit signed range will result in exactly the
same insn field as when the reloc description is followed to the
letter.
* elf32-ppc.c (ppc_elf_howto_raw): Correct overflow check for
many relocations. Correct bitsize and rightshift too for a number
of VLE relocs. Describe R_PPC_VLE_SDA21 and R_PPC_VLE_SDA21_LO.
Correct dst_mask on R_PPC_VLE_SDA21_LO.
(ppc_elf_vle_split16): Tidy, delete unnecessary prototype.
(ppc_elf_relocate_section): Modify overflow test for 16-bit
fields in instructions to signed/unsigned according to whether
the field takes a signed or unsigned value. Tidy vle split16 code.
Correct R_PPC_VLE_SDA21 and R_PPC_VLE_SDA21_LO handling.
R_PPC64_ADDR16 is used in three contexts:
- .short data relocation
- 16-bit signed insn fields, eg. addi
- 16-bit unsigned insn fields, eg. ori
In the first case we want to allow both signed and unsigned 16-bit
values, the latter two ought to error if the field exceeds the range
of values allowed for 16-bit signed and unsigned integers
respectively. These conflicting requirements meant that ld had to
choose the least restrictive overflow checks, and thus it is possible
to construct testcases where an addi field overflows but is not
reported by ld. Many relocations dealing with 16-bit insn fields have
this problem. What's more, some relocations that are only ever used
for signed fields of instructions woodenly copied the lax overflow
checking of R_PPC64_ADDR16.
bfd/
* elf64-ppc.c (ppc64_elf_howto_raw): Use complain_overflow_signed
for R_PPC64_ADDR14, R_PPC64_ADDR14_BRTAKEN, R_PPC64_ADDR14_BRNTAKEN,
R_PPC64_SECTOFF, R_PPC64_ADDR16_DS, R_PPC64_SECTOFF_DS,
R_PPC64_REL16 entries. Use complain_overflow_dont for R_PPC64_TOC.
(ppc64_elf_relocate_section): Modify overflow test for 16-bit
fields in instructions to signed/unsigned according to whether
the field takes a signed or unsigned value.
gold/
* powerpc.cc (Powerpc_relocate_functions::Overflow_check): Add
CHECK_UNSIGNED, CHECK_LOW_INSN, CHECK_HIGH_INSN.
(Powerpc_relocate_functions::has_overflow_unsigned): New function.
(Powerpc_relocate_functions::has_overflow_bitfield,
overflowed): Use the above.
(Target_powerpc::Relocate::relocate): Correct overflow checking
for a number of relocations. Modify overflow test for 16-bit
fields in instructions to signed/unsigned according to whether
the field takes a signed or unsigned value.
I noticed GDB was failing to enable threading support for 32-bit AIX
cores. I traced it to failure to read variables from libpthreads.a.
The issue is that data for that library is loaded at a high address,
and bfd is sign extending the section addresses:
(gdb) info files
Symbols from "/home/palves/crash".
Local core dump file:
`/home/palves/core', file type aixcoff-rs6000.
0x2ff22000 - 0x2ff23000 is .stack
0x20000000 - 0x200316e0 is .data
0x20000e90 - 0x200016c0 is .data
0xfffffffff0254000 - 0xfffffffff0297920 is .data
0xfffffffff07b46a8 - 0xfffffffff07b47c8 is .data
0xfffffffff0298000 - 0xfffffffff029bfcc is .data
0xfffffffff06dafe0 - 0xfffffffff07b3838 is .data
Local exec file:
`/home/palves/crash', file type aixcoff-rs6000.
Entry point: 0x20001394
0x10000150 - 0x10000e90 is .text
0x20000e90 - 0x2000149c is .data
0x2000149c - 0x200016c0 is .bss
0xd053b124 - 0xd053e15f is .text in /usr/lib/libpthreads.a(shr_comm.o)
0xf0254000 - 0xf0297920 is .data in /usr/lib/libpthreads.a(shr_comm.o)
0xf0254450 - 0xf0297920 is .bss in /usr/lib/libpthreads.a(shr_comm.o)
0xd053a280 - 0xd053aabe is .text in /usr/lib/libcrypt.a(shr.o)
0xf07b46a8 - 0xf07b47c8 is .data in /usr/lib/libcrypt.a(shr.o)
0xf07b47c8 - 0xf07b47c8 is .bss in /usr/lib/libcrypt.a(shr.o)
0xd04fb180 - 0xd053917e is .text in /usr/lib/libpthreads.a(shr_xpg5.o)
0xf0298000 - 0xf029bfcc is .data in /usr/lib/libpthreads.a(shr_xpg5.o)
0xf029bf64 - 0xf029bfcc is .bss in /usr/lib/libpthreads.a(shr_xpg5.o)
0xd0100900 - 0xd04fa39c is .text in /usr/lib/libc.a(shr.o)
0xf06dafe0 - 0xf07b3838 is .data in /usr/lib/libc.a(shr.o)
0xf0751e94 - 0xf07b3838 is .bss in /usr/lib/libc.a(shr.o)
Notice:
...
0xfffffffff0298000 - 0xfffffffff029bfcc is .data
...
Those are the bfd section start/end addresses. It't not visible here:
...
0xf0298000 - 0xf029bfcc is .data in /usr/lib/libpthreads.a(shr_xpg5.o)
...
... just because GDB trims that number to 32-bit when printing.
GDB then fails to find the memory for libpthreads.a variables in the
core, and falls back to reading it directly from the executable (which
yields the values as originally initialized in the code).
E.g.:
(gdb) p &__n_pthreads
$2 = (<data variable, no debug info> *) 0xf074fda8 <__n_pthreads>
(gdb) p __n_pthreads
$1 = -1
That should have returned 2 instead of -1.
bfd/
2014-03-07 Pedro Alves <palves@redhat.com>
* rs6000-core.c (rs6000coff_core_p): Cast pointers to bfd_vma
through ptr_to_uint instead of through long.
This adds support for "func@localentry", an expression that returns the
ELFv2 local entry point address of function "func". I've excluded
dynamic relocation support because that obviously would require glibc
changes.
include/elf/
* ppc64.h (R_PPC64_REL24_NOTOC, R_PPC64_ADDR64_LOCAL): Define.
bfd/
* elf64-ppc.c (ppc64_elf_howto_raw): Add R_PPC64_ADDR64_LOCAL entry.
(ppc64_elf_reloc_type_lookup): Support R_PPC64_ADDR64_LOCAL.
(ppc64_elf_check_relocs): Likewise.
(ppc64_elf_relocate_section): Likewise.
* Add BFD_RELOC_PPC64_ADDR64_LOCAL.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
gas/
* config/tc-ppc.c (ppc_elf_suffix): Support @localentry.
(md_apply_fix): Support R_PPC64_ADDR64_LOCAL.
ld/testsuite/
* ld-powerpc/elfv2-2a.s, ld-powerpc/elfv2-2b.s: New files.
* ld-powerpc/elfv2-2exe.d, ld-powerpc/elfv2-2so.d: New files.
* ld-powerpc/powerpc.exp: Run new test.
elfcpp/
* powerpc.h (R_PPC64_REL24_NOTOC, R_PPC64_ADDR64_LOCAL): Define.
gold/
* powerpc.cc (Target_powerpc::Scan::local, global): Support
R_PPC64_ADDR64_LOCAL.
(Target_powerpc::Relocate::relocate): Likewise.
2014-02-04 Heiher <r@hev.cc>
* elfxx-mips.c (mips_set_isa_flags): Use E_MIPS_ARCH_64R2 for
Loongson-3A.
(mips_mach_extensions): Make bfd_mach_mips_loongson_3a an
extension of bfd_mach_mipsisa64r2.
opcodes/
2014-02-04 Heiher <r@hev.cc>
* mips-dis.c (mips_arch_choices): Usee ISA_MIPS64R2 for Loongson-3A.
gas/
2014-02-04 Heiher <r@hev.cc>
* config/tc-mips.c (mips_cpu_info_table): Use ISA_MIPS64R2 for
Loongson-3A.
using Thumb2 instructions for those cores which do not support the ARM ISA.
* elf32-arm.c (elf32_thumb2_plt0_entry): New array.
(elf32_thumb2_plt_entry): New array.
(elf32_arm_create_dynamic_sections): Set PLT entry sizes when
using thumb2 based PLT.
(elf32_arm_populate_plt_entry): Handle generating Thumb2 based PLT
entries.
(elf32_arm_final_link_relocate): Do not bias jumps to Thumb based
PLT entries.
(elf32_arm_finish_dynamic_sections): Handle creation of Thumb2
based PLT 0-entry.
(elf32_arm_output_plt_map_1): Handle creation of local symbols for
Thumb2 based PLT 0-entry.
(elf32_arm_output_arch_local_syms): Handle creation of local
symbols for Thumb2 based PLT entries.
Enabled via the use of a new linker command line option: --long-plt.
* bfd-in.h: Add export of bfd_elf32_arm_use_long_plt.
* bfd-in2.h: Regenerate.
* elf32-arm.c (elf32_arm_plt_entry_long): New array.
(elf32_arm_link_hash_table_create): Set plt_entry_size to 16 if
using long PLT entries.
(bfd_elf32_arm_use_long_plt): New function.
(elf32_arm_populate_plt_entry): Add support for long PLT entries.
* emultempl/armelf.em (OPTION_LONG_PLT): Define.
(PARSE_AND_LIST_LONGOPTS): Add long-plt.
(PARSE_AND_LIST_OPTIONS): Likewise.
(PARSE_AND_LIST_ARGS_CASES): Handle long-plt.
* ld.texinfo: Document --long-plt.
* ld-arm/long-plt-format.s: New test case.
* ld-arm/long-plt-format.d: Expected disassembly.
* ld-arm/arm-elf.exp: Run the new test.
5446cbdf82 broke powerpc-lynxos,
powerpc-netware, powerpc-windiss and powerpc-vxworks.
bfd/
* elf32-ppc.c (ppc_elf_link_hash_table_create): Provide default
params for targets that don't use ppc32elf.em.
ld/
* emulparams/elf32ppcvxworks.sh: Source plt_unwind.sh and
use ppc32elf.em.
* emultempl/ppc32elf.em (ppc_after_open): Don't compile for
vxworks.
(LDEMUL_AFTER_OPEN): Don't set for vxworks.
(PARSE_AND_LIST_LONGOPTS, PARSE_AND_LIST_OPTIONS): Exclude
-secure-plt, -bss-plt and -sdata-got when vxworks.
Intel MPX introduces 4 bound registers, which will be used for parameter
passing in x86-64. Bound registers are cleared by branch instructions.
Branch instructions with BND prefix will keep bound register contents.
This leads to 2 requirements to 64-bit MPX run-time:
1. Dynamic linker (ld.so) should save and restore bound registers during
symbol lookup.
2. Change the current 16-byte PLT0:
ff 35 08 00 00 00 pushq GOT+8(%rip)
ff 25 00 10 00 jmpq *GOT+16(%rip)
0f 1f 40 00 nopl 0x0(%rax)
and 16-byte PLT1:
ff 25 00 00 00 00 jmpq *name@GOTPCREL(%rip)
68 00 00 00 00 pushq $index
e9 00 00 00 00 jmpq PLT0
which clear bound registers, to preserve bound registers.
We use 2 new relocations:
to mark branch instructions with BND prefix.
When linker sees any R_X86_64_PC32_BND or R_X86_64_PLT32_BND relocations,
it switches to a different PLT0:
ff 35 08 00 00 00 pushq GOT+8(%rip)
f2 ff 25 00 10 00 bnd jmpq *GOT+16(%rip)
0f 1f 00 nopl (%rax)
to preserve bound registers for symbol lookup and it also creates an
external PLT section, .pl.bnd. Linker will create a BND PLT1 entry
in .plt:
68 00 00 00 00 pushq $index
f2 e9 00 00 00 00 bnd jmpq PLT0
0f 1f 44 00 00 nopl 0(%rax,%rax,1)
and a 8-byte BND PLT entry in .plt.bnd:
f2 ff 25 00 00 00 00 bnd jmpq *name@GOTPCREL(%rip)
90 nop
Otherwise, linker will create a legacy PLT1 entry in .plt:
68 00 00 00 00 pushq $index
e9 00 00 00 00 jmpq PLT0
66 0f 1f 44 00 00 nopw 0(%rax,%rax,1)
and a 8-byte legacy PLT in .plt.bnd:
ff 25 00 00 00 00 jmpq *name@GOTPCREL(%rip)
66 90 xchg %ax,%ax
The initial value of the GOT entry for "name" will be set to the the
"pushq" instruction in the corresponding entry in .plt. Linker will
resolve reference of symbol "name" to the entry in the second PLT,
.plt.bnd.
Prelink stores the offset of pushq of PLT1 (plt_base + 0x10) in GOT[1]
and GOT[1] is stored in GOT[3]. We can undo prelink in GOT by computing
the corresponding the pushq offset with
GOT[1] + (GOT offset - &GOT[3]) * 2
Since for each entry in .plt except for PLT0 we create a 8-byte entry in
.plt.bnd, there is extra 8-byte per PLT symbol.
We also investigated the 16-byte entry for .plt.bnd. We compared the
8-byte entry vs the the 16-byte entry for .plt.bnd on Sandy Bridge.
There are no performance differences in SPEC CPU 2000/2006 as well as
micro benchmarks.
Pros:
No change to undo prelink in dynamic linker.
Only 8-byte memory overhead for each PLT symbol.
Cons:
Extra .plt.bnd section is needed.
Extra 8 byte for legacy branches to PLT.
GDB is unware of the new layout of .plt and .plt.bnd.
bfd/
* elf64-x86-64.c (elf_x86_64_bnd_plt0_entry): New.
(elf_x86_64_legacy_plt_entry): Likewise.
(elf_x86_64_bnd_plt_entry): Likewise.
(elf_x86_64_legacy_plt2_entry): Likewise.
(elf_x86_64_bnd_plt2_entry): Likewise.
(elf_x86_64_bnd_arch_bed): Likewise.
(elf_x86_64_link_hash_entry): Add has_bnd_reloc and plt_bnd.
(elf_x86_64_link_hash_table): Add plt_bnd.
(elf_x86_64_link_hash_newfunc): Initialize has_bnd_reloc and
plt_bnd.
(elf_x86_64_copy_indirect_symbol): Also copy has_bnd_reloc.
(elf_x86_64_check_relocs): Create the second PLT for Intel MPX
in 64-bit mode.
(elf_x86_64_allocate_dynrelocs): Handle the second PLT for IFUNC
symbols. Resolve call to the second PLT if it is created.
(elf_x86_64_size_dynamic_sections): Keep the second PLT section.
(elf_x86_64_relocate_section): Resolve PLT references to the
second PLT if it is created.
(elf_x86_64_finish_dynamic_symbol): Use BND PLT0 and fill the
second PLT entry for BND relocation.
(elf_x86_64_finish_dynamic_sections): Use MPX backend data if
the second PLT is created.
(elf_x86_64_get_synthetic_symtab): New.
(bfd_elf64_get_synthetic_symtab): Likewise. Undefine for NaCl.
ld/
* emulparams/elf_x86_64.sh (TINY_READONLY_SECTION): New.
ld/testsuite/
* ld-x86-64/mpx.exp: Run bnd-ifunc-1 and bnd-plt-1.
* ld-x86-64/bnd-ifunc-1.d: New file.
* ld-x86-64/bnd-ifunc-1.s: Likewise.
* ld-x86-64/bnd-plt-1.d: Likewise.
This patch allows the user to override powerpc64-ld's default for
providing linker generated register save and restore functions as used
by gcc -Os code. Normally these are not provided by ld -r, so Linux
kernel modules have needed to include their own copies.
bfd/
* elf64-ppc.h (struct ppc64_elf_params): Add save_restore_funcs.
* elf64-ppc.c (ppc64_elf_func_desc_adjust): Use it to control
provision of out-of-line register save/restore routines.
ld/
* emultempl/ppc64elf.em (params): Init new field.
(ppc_create_output_section_statements): Set params.save_restore_funcs
default.
(PARSE_AND_LIST_*): Add support for --save-restore-funcs and
--no-save-restore-funcs.
execute permission regardless of the underlying PT_LOAD segment permissions.
Deleting this code allows the default linker behavior which is to set the
dynamic segment to the same permissions as the sections that make it up.
This change alters one existing test case to check the segment flags for
PT_DYNAMIC.
bfd/ChangeLog
* elfxx-mips.c(_bfd_mips_elf_modify_segment_map): Deleted hard coding of
PT_DYNAMIC segment flags.
ld/testsuite/ChangeLog
* ld-mips-elf/pic-and-nonpic-3a.sd: Check DYNAMIC segment flags.
abfd->section_count unexpectedly changes between 218 and 248 in:
150 bfd_simple_get_relocated_section_contents (bfd *abfd,
[...]
218 saved_offsets = malloc (sizeof (struct saved_output_info)
219 * abfd->section_count);
[...]
230 _bfd_generic_link_add_symbols (abfd, &link_info);
[...]
248 bfd_map_over_sections (abfd, simple_restore_output_info, saved_offsets);
_bfd_generic_link_add_symbols increases section_count
and simple_restore_output_info later reads unallocated part of saved_offsets.
READ of size 8 at 0x601c0000c5c0 thread T0
#0 0x1124770 in simple_restore_output_info (.../gdb/gdb+0x1124770)
#1 0x10ecd51 in bfd_map_over_sections (.../gdb/gdb+0x10ecd51)
#2 0x1125150 in bfd_simple_get_relocated_section_contents (.../gdb/gdb+0x1125150)
bfd/
2014-02-17 Jan Kratochvil <jan.kratochvil@redhat.com>
PR binutils/16595
* simple.c (struct saved_offsets): New.
(simple_save_output_info): Use it for ptr.
(simple_restore_output_info): Use it for ptr. Check section_count.
(bfd_simple_get_relocated_section_contents): Use it for saved_offsets.
Moves assorted variables used to communicate between ld and bfd into
a struct, hooks it into the bfd link_hash_table early, and removes
all other places where such variables were passed piecemeal.
bfd/
* elf64-ppc.h (struct ppc64_elf_params): Define.
(ppc64_elf_init_stub_bfd, ppc64_elf_edit_opd, ppc64_elf_tls_setup,
ppc64_elf_setup_section_lists, ppc64_elf_size_stubs,
ppc64_elf_build_stubs): Update prototype.
* elf64-ppp.c (struct ppc_link_hash_table): Add params, delete other
fields now in params. Adjust code throughout file.
(ppc64_elf_init_stub_bfd): Delete "abfd" parameter, add "params".
Save params pointer in htab.
(ppc64_elf_edit_opd, ppc64_elf_tls_setup,
ppc64_elf_setup_section_lists, ppc64_elf_size_stubs,
ppc64_elf_build_stubs): Remove parameters now in "params".
ld/
* emultemps/ppc64elf.em (params): New static struct replacing
various other static vars. Adjust code throughout file.
This fixes the glaring error that the ppc476 workaround wasn't
actually enabled for ld -r, and adjusts relocations to match moved
code.
bfd/
* elf32-ppc.c (ppc_elf_relocate_section): Move relocs on insns
patched for ppc476 workaround. Reapply branch taken/not taken
relocs.
ld/
* emultempl/ppc32elf.em (ppc_after_open_output): Really enable
ppc476 workaround for ld -r.
Adding long-branch stubs for __tls_get_addr calls that are optimised
away is silly. It also causes assertion failures on newer object files
that use R_PPC_TLSGD and R_PPC_TLSLD marker relocs, and half-optimised
(ie. broken) code for older object files.
PR 16546
* elf32-ppc.c (ppc_elf_relax_section): Don't build long-branch
stubs for calls to __tls_get_addr that we know will later be
optimised away.
The Linux kernel builds modules using ld -r. These might need the
ppc476 workaround, so enable it for ld -r if sections have sufficient
alignment to tell location within a page.
bfd/
* elf32-ppc.c (ppc_elf_relax_section): Enable ppc476 workaround
for ld -r, when code sections are sufficiently aligned.
* elf32-ppc.h (struct ppc_elf_params): Delete pagesize. Add
pagesize_p2.
ld/
* emultempl/ppc32elf.em (pagesize): New static var.
(ppc_after_open_output): Set params.pagesize_p2 from pagesize.
(PARSE_AND_LIST_ARGS_CASES): Adjust to use pagesize.
For powerpc64 as HJ did earlier for other ELF targets, and a tidy.
PR gold/15530
* elf64-ppc.c (ppc64_elf_gc_mark_dynamic_ref): Support
--export-dynamic and --dynamic-list marking of symbols.
* elflink.c (bfd_elf_gc_mark_dynamic_ref_symbol): Reorder
cheap tests first.
This patch provides a means for backend relax_section support to
increase the size of a section without needing to reallocate
section contents. This helps reduce memory usage when the added space
does not need to be written in relax_section, as is the case for
powerpc. Writing the stubs later means a few tweaks are needed in the
powerpc relocate_section function, but also removes some code
duplication since the extra ld -r relocs can be written there too.
* elf-bfd.h (struct elf_backend_data): Add caches_rawsize.
* elfxx-target.h (elf_backend_caches_rawsize): Define.
(elfNN_bed): Init new field.
* elflink.c (elf_link_input_bfd): Handle caches_rawsize.
* elf32-ppc.c (shared_stub_entry): Zero addi offset.
(ppc_elf_relax_section): Don't reallocate section here, write
stubs, or write out relocs for ld -r here..
(ppc_elf_relocate_section): ..instead write stubs here, and use
existing code to write out relocs for ld -r. Fix offset
adjustment on reloc for little-endian.
(elf_backend_caches_rawsize): Define.
bfd/
2014-02-04 Jan Kratochvil <jan.kratochvil@redhat.com>
* coff-rs6000.c (xcoff_write_archive_contents_big): Free OFFSETS in
return paths. Three times.
* elf64-ppc.c (ppc64_elf_link_hash_table_create): Free HTAB in all
return paths.
(ppc64_elf_tls_optimize): Free TOC_REF in return path.
(ppc64_elf_edit_toc): Free USED in return path.
This implements a work-around for an icache bug on 476 that can cause
execution of stale instructions when control falls through from one
page to the next. The idea is to prevent such fall-through by
replacing the last instruction on a page with a branch to a patch
area containing the instruction, then branch to the next page.
The patch also fixes a number of bugs in the existing support for long
branch trampolines.
bfd/
* elf32-ppc.c (struct ppc_elf_link_hash_table): Add params.
Delete emit_stub_syms, no_tls_get_addr_opt. Update all uses.
(ppc_elf_link_params): New function.
(ppc_elf_create_glink): Align .glink to 64 bytes for ppc476
workaround.
(ppc_elf_select_plt_layout): Remove plt_style and emit_stub_syms
parameters. Use htab->params instead.
(ppc_elf_tls_setup): Remove no_tls_get_addr_opt parameter.
(ppc_elf_size_dynamic_sections): Align __glink_PLTresolve to
64 bytes for ppc476 workaround.
(struct ppc_elf_relax_info): New.
(ppc_elf_relax_section): Exclude linker created sections and
those too small to hold one instruction. Don't add another
branch around trampolines on later relax passes. Don't
generate trampolines for undefined symbols when !relocatable,
nor for plugin symbols. Allocate space for ppc476 workaround
patch area. Free fixups on error return path.
(ppc_elf_relocate_section): Handle ppc476 workaround patching.
* elf32-ppc.h (struct ppc_elf_params): New.
(ppc_elf_select_plt_layout, ppc_elf_tls_setup): Update prototype.
(ppc_elf_link_params): Declare.
* section.c (SEC_INFO_TYPE_TARGET): Define.
* bfd-in2.h: Regenerate.
ld/
* emultempl/ppc32elf.em (no_tls_get_addr_opt, emit_stub_syms)
plt_style): Delete. Adjust all refs to instead use..
(params): ..this. New variable.
(ppc_after_open_output): New function. Tweak params and pass to
ppc_elf_link_params.
(ppc_after_open): Adjust ppc_elf_select_plt_layout call.
(ppc_before_allocation): Adjust ppc_elf_tls_setup call. Enable
relaxation for ppc476 workaround.
(PARSE_AND_LIST_*): Add --{no-,}ppc476-workaround support.
(LDEMUL_CREATE_OUTPUT_SECTION_STATEMENTS): Define.
ELFOSABI_GNU for binaries containing unique symbols. So I am reverting that patch and
instead applying the patch below to fix up the targets that were triggering the test failure.
bfd/ChangeLog
2014-01-29 Nick Clifton <nickc@redhat.com>
* elf32-metag.c (elf_metag_post_process_headers): Call
_bfd_elf_post_process_headers.
* elf32-sh64.c (sh64_elf_copy_private_data): Call
_bfd_elf_copy_private_data.
* elf64-sh64.c (sh_elf64_copy_private_data_internal): Likewise.
binutils/testsuite/ChangeLog
2014-01-29 Nick Clifton <nickc@redhat.com>
* binutils-all/strip-10.d: Revert previous delta.
abbreviation may not be the current CU. Thus we need to make sure
that when we read the abbreviation we use the correct CU.
* dwarf2.c (find_abstract_instance_name): For DW_FORM_ref_addr
attributes select the CU containing the abbreviation, which may not
be the current CU.
ELFv2 needs fewer relocs to annotate plt call stubs. I correctly
allocated a smaller buffer and wrote the proper relocs, but stupidly
bumped the reloc count as for ELFv1.
* elf64-ppc.c (ppc_build_one_stub): Correct reloc count passed
to get_relocs for ELFv2.
Bad linker script may lead to TLS sections separated by non-TLS sections
in output. This patch changes linker assert to a linker error to
provide better linker diagnosis.
PR ld/16498
* elf.c (_bfd_elf_map_sections_to_segments): Issue a linker error
if TLS sections are not adjacent.
Adds a section for --as-needed libraries to a linker map file, similar
to what we do for archive libraries.
bfd/
* elflink.c (elf_link_add_object_symbols): Call minfo for --as-needed.
ld/
* ldlang.c (asneeded_list_head, asneeded_list_tail): New vars.
(lang_init): Initialise them.
(lang_print_asneeded): New function.
(lang_process): Call lang_print_asneeded.
* ldlang.h (struct asneeded_minfo): New.
(asneeded_list_tail): Declare.
* ldmain.c (add_archive_element): Improve archive map heading.
* ldmisc.c (minfo): Stash --as-needed info.
After resolving a versioned reference, foo@VER1, to a default versioned
definition, foo@@VER1, from a shared object, we also merge it with
the existing regular default symbol definition, foo. When foo is IFUNC
and foo@@VER1 aren't, we will merge 2 incompatible definitions. This
patch avoids merging foo@@VER1 definition with foo definition if
one is IFUNC and the other isn't.
There is nothing linker can do when a type mismatched default definition
are made dynamic by info->shared, info->export_dynamic or h->ref_dynamic.
But we do want to avoid exporting it when building PIE. Let's remove
those checks.
bfd/
PR ld/2404
* elflink.c (_bfd_elf_merge_symbol): Don't check info->shared,
info->export_dynamic, nor !h->ref_dynamic for type mismatch when
adding the default version.
ld/testsuite/
PR ld/2404
* ld-elf/shared.exp: Add a PIE test for PR ld/2404.
When a symbol is absolute, this code in mips_elf_record_got_page_entry
entry = bfd_zalloc (sec->owner, sizeof (*entry));
segfaults. sec == bfd_abs_section_ptr and sec->owner == NULL.
* elfxx-mips.c (mips_elf_record_got_page_entry): Pass in a
mips_elf_traverse_got_arg* rather than mips_got_info*.
Adjust caller. Alloc on output_bfd rather than symbol section
owner.
It has been fixed by
commit 4199e3b866
Author: Alan Modra <amodra@gmail.com>
Date: Wed Jan 15 21:50:55 2014 +1030
non-PIC references to __ehdr_start in pie and shared
Rather than hacking every backend to not discard dynamic relocations
against an undefined hidden __ehdr_start, make it appear to be defined
early. We want __ehdr_start hidden before size_dynamic_sections so
that it isn't put in .dynsym, but we do need the dynamic relocations
for a PIE or shared library with a non-PIC reference. Defining it
early is wrong if we don't actually define the symbol later to its
proper value. (In some cases we want to leave the symbol undefined,
for example, when the ELF header isn't loaded, and we don't have this
infomation available in before_allocation.)
* elf32-i386.c (elf_i386_allocate_dynrelocs): Revert the last
change.
* elf64-x86-64.c (elf_x86_64_allocate_dynrelocs): Likewise.
__ehdr_start will be defined by assign_file_positions_for_non_load_sections
later.
PR ld/16428
* elf32-i386.c (elf_i386_allocate_dynrelocs): Don't discard relocs
against __ehdr_start.
* elf64-x86-64.c (elf_x86_64_allocate_dynrelocs): Likewise.
PR ld/16428
* elf32-i386.c (elf_i386_allocate_dynrelocs): Don't update reloc
count if there are any non pc-relative relocs.
* elf64-x86-64.c (elf_x86_64_allocate_dynrelocs): Likewise.
bfd/
2014-01-09 Tristan Gingold <gingold@adacore.com>
* coff-rs6000.c (rs6000coff_vec, pmac_xcoff_vec): use jump
table macros and add macros to initializa the structure.
This patch fixes 2 GNU_RELRO segment bugs:
1. lang_size_sections didn't properly align base to the maximum
alignment power of sections between DATA_SEGMENT_ALIGN and
DATA_SEGMENT_RELRO_END.
2. ld failed to adjust LOAD segment to generate GNU_RELRO segment
when LOAD segment doesn't fit GNU_RELRO segment. This is
https://sourceware.org/bugzilla/show_bug.cgi?id=14207
We "fixed" ld by not generating GNU_RELRO segment. This patch
adjusts LOAD segment to generate GNU_RELRO segment. It fixes
PR ld/16322 and at the same time it also fixes PR binutils/16323
since now we can adjust LOAD segment if it is too small.
bfd/
PR ld/14207
PR ld/16322
PR binutils/16323
* elf.c (_bfd_elf_map_sections_to_segments): Don't check section
size for PT_GNU_RELRO segment.
(assign_file_positions_for_load_sections): If PT_LOAD segment
doesn't fit PT_GNU_RELRO segment, adjust its p_filesz and p_memsz.
ld/
PR ld/14207
PR ld/16322
PR binutils/16323
* ldlang.c (lang_size_sections): Properly align RELRO base.
ld/testsuite/
PR ld/14207
PR ld/16322
PR binutils/16323
* ld-elf/pr16322.d: New file.
* ld-elf/pr16322.s: Likewise.
* ld-x86-64/pr14207.d: Expect PT_GNU_RELRO segment.
This removes the last uses of the obsolete VA_* macros from binutils.
All the binutils and bfd changes were tested by rebuilding.
I didn't rebuild the gas change but I think it is obviously correct.
2014-01-07 Tom Tromey <tromey@redhat.com>
* elf32-xtensa.c (vsprint_msg): Don't use old VA_* compatibility
wrappers.
2014-01-07 Tom Tromey <tromey@redhat.com>
* bucomm.c (fatal, non_fatal): Replace obsolete VA_* macros with
stdarg macros.
* dlltool.c (inform): Replace obsolete VA_* macros with stdarg
macros.
* dllwrap.c (inform, warn): Replace obsolete VA_* macros with
stdarg macros.
2014-01-07 Tom Tromey <tromey@redhat.com>
* config/tc-tic30.c (debug): Avoid old VA_* compatibility
wrappers.
Don't attempt to merge CIEs with a larger number of insns than will
fit in the buffer.
* elf-eh-frame.c (cie_eq): Return false when initial_insn_length
is too large.
(cie_compute_hash): Don't exceed bounds of initial_instructions.
(_bfd_elf_parse_eh_frame): Always set initial_insn_length, and
save as much of insns to initial_instructions[] as will fit.
It is a good pratice to set the SHF_INFO_LINK bit when the sh_info field
represents a section header index.
bfd/
PR binutils/16317
* elf.c (assign_section_numbers): Set the SHF_INFO_LINK bit for
SHT_REL/SHT_RELA sections when setting the sh_info field.
binutils/testsuite/
PR binutils/16317
* binutils-all/readelf.s: Updated.
* binutils-all/readelf.s-64: Likewise.
ld/testsuite/
PR binutils/16317
* ld-elf/linkinfo1.s: New file.
* ld-elf/linkinfo1a.d: Likewise.
* ld-elf/linkinfo1b.d: Likewise.
__CYGWIN__ or __MINGW32__ macro is defined.
(rsrc_cmp): Fix Windows host version and version without wchar header.
[__CYGWIN__, __MINGW32__]: Introduce rsrccmp macro.
Fix coding standard issues.
Include safe-ctype.h.
(HighBitSet, SetHighBit, WithoutHighBit): New macros.
(pe_print_resource_entries): Rename to
rsrc_print_resource_entries. Handle names that are not RVAs.
(pe_print_resource_directory): Rename to
rsrc_print_resource_directory.
(pe_print_rsrc): Rename to rsrc_print_section. Corrupt
computation of RVA bias.
(rsrc_count_entries): New function.
(rsrc_count_directory): New function.
(rsrc_parse_entry): New function.
(rsrc_parse_entries): New function.
(rsrc_parse_directory): New function.
(rsrc_write_string): New function.
(rsrc_compute_rva): New function.
(rsrc_write_leaf): New function.
(rsrc_write_entry): New function.
(rsrc_write_directory): New function.
(u16_mbtouc): New function.
(rsrc_cmp): New function.
(rsrc_print_name): New function.
(rsrc_resource_name): New function.
(rsrc_merge_string_entries): New function.
(rsrc_sort_entries): New function.
(rsrc_attach_chain): New function.
(rsrc_merge): New function.
(rsrc_process_section): New function - merges the contents of a
.rsrc section.
(_bfd_XXi_final_link_postscript): Call rsrc_process_section.
* configure.in (AC_CHECK_HEADERS): Add wchar.h
* config.in: Regenerate.
* configure: Regenerate.
bfd/
* elf.c (assign_file_positions_except_relocs): Set e_type in ELF
header to ET_EXEC for -pie -Ttext-segment=.
2013-12-10 H.J. Lu <hongjiu.lu@intel.com>
* ld-pie/vaddr-0.d: New file.
* ld-pie/vaddr-1.d: Likewise.
* ld-pie/vaddr.s: Likewise.
libx.so refers to some_sym, liby.so provides some_sym@some_version
wasn't seen as satisfying the reference.
* elf64-ppc.c (_bfd_elf_add_default_symbol): Set dynamic_def
and ref_dynamic_nonweak when chaining together indirect
symbols.
an entry in a .rsrc section.
(pe_print_resource_directory): New function: Displays a directory
in a .rsrc section.
(pe_print_rsrc): New function: Displays the contents of .rsrc
section.
(_bfd_XX_print_private_bfd_data_common): Call pe_print_rsrc.
* binutils-all/windres/windres.exp: Run for x86_64-pc-cygwin.
Add test of "objump -p" output.
I don't know what I was thinking here to omit the save of r2.
Possibly I was looking at -msave-toc-indirect code at the time, where
r2 is saved in the function prologue.
* elf64-ppc.c (ppc_build_one_stub <ppc_stub_plt_branch_r2off>):
Don't omit saving of r2 for ELFv2. Don't addi 2,2,0.
(ppc_size_one_stub <ppc_stub_plt_branch_r2off>): Adjust to suit.
With -mcmodel=medium we can't assume that a -R object doesn't use
toc-relative addressing if there's no toc. Lots of things are
accessed via r2, not just the toc/got section. Also, testing for
.opd is plain wrong for ELFv2.
* elf64-ppc.c (ppc64_elf_link_just_syms): Remove .got check.
Handle ELFv2.
The code for handling GOT references to ifunc symbols in static links
was missing.
bfd/ChangeLog:
2013-11-26 Will Newton <will.newton@linaro.org>
* elfnn-aarch64.c (elfNN_aarch64_finish_dynamic_symbol):
Handle STT_GNU_IFUNC symbols correctly in static links.
ld/testsuite/ChangeLog:
2013-11-26 Will Newton <will.newton@linaro.org>
* ld-aarch64/aarch64-elf.exp: Add ifunc-22.
* ld-aarch64/ifunc-22.d: New file.
* ld-aarch64/ifunc-22.s: Likewise.
The .got.plt header size was not being correctly taken into account
when calculating the offset for relocations against ifunc symbols.
bfd/ChangeLog:
2013-11-26 Will Newton <will.newton@linaro.org>
* elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Ensure
PLT_INDEX is calculated using correct header size.
ld/testsuite/ChangeLog:
2013-11-26 Will Newton <will.newton@linaro.org>
* ld-aarch64/aarch64-elf.exp: Add ifunc-21 test.
* ld-aarch64/ifunc-21.d: New file.
* ld-aarch64/ifunc-21.s: Likewise.
output deterministic. time.h include is no longer needed.
* resres.c (res_append_resource): Likewise.
* pe-dll.c (fill_edata): Only use a real timestamp if
--insert-timestamp was used.
* emultempl/pe.em: Add the --insert-timestamp option.
* emultempl/pep.em: Likewise for 64bit.
* ld.texinfo: Document the --insert-timestamp option.
* libcoff-in.h: Add insert_timestamp flag to the pe_data struct.
* libcoff.h: Regenerate.
* peXXigen.c (_bfd_XXi_only_swap_filehdr_out): Only use a real
timestamp if --insert-timestamp was used.
* elf32-arm.c (elf32_arm_populate_plt_entry): Return a boolean
value, TRUE for success, FALSE for failure.
Fail if attempting to create a PLT entry for a thumb only target.
(elf32_arm_final_link_relocate): Check result of calling
elf32_arm_populate_plt_entry.
(elf32_arm_finish_dynamic_symbol): Likewise.
* elfnn-aarch64.c (elfNN_aarch64_howto_table): Use
R_AARCH64_TLS_DTPMOD64 instead of R_AARCH64_TLS_DTPMOD;
likewise for R_AARCH64_TLS_DTPREL and R_AARCH64_TLS_TPREL.
include/elf/
* aarch64.h: Define R_AARCH64_TLS_DTPMOD64,
R_AARCH64_TLS_DTPREL64 and R_AARCH64_TLS_TPREL64; guard
R_AARCH64_TLS_DTPMOD, R_AARCH64_TLS_DTPREL and
R_AARCH64_TLS_TPREL with RELOC_MACROS_GEN_FUNC.
Some places in elf64-ppc.c carelessly used SYMBOL_CALLS_LOCAL when
the proper test is SYMBOL_REFERENCES_LOCAL for cases where we take the
address of a protected symbol. This works OK for function descriptors
but not for ELFv2. Setting symbols to their global entry stub a
little earlier is to ensure _bfd_elf_hash_symbol allows such symbols
in .gnu.hash.
* elf64-ppc.c (ppc64_elf_edit_toc): Use SYMBOL_REFERENCES_LOCAL
here, not SYMBOL_CALLS_LOCAL.
(ppc64_elf_relocate_section): Likewise.
(size_global_entry_stubs): Set undefined symbols on their global
entry stubs here..
(build_global_entry_stubs): ..rather than here.
(ppc64_elf_build_stubs): Don't reset glink->size before calling
build_global_entry_stubs.
bfd/
* archures.c (bfd_mach_i386_nacl): Fix definition so it doesn't
collide with bfd_mach_l1om.
* bfd-in2.h: Regenerate.
* elf32-i386.c (elf32_i386_nacl_elf_object_p): New function.
(elf_backend_object_p): Use that in elf32-i386-nacl definition.
* elf64-x86-64.c (elf64_x86_64_nacl_elf_object_p): New function.
(elf_backend_object_p): Use that in elf64-x86-64-nacl definition.
(elf32_x86_64_nacl_elf_object_p): New function.
(elf_backend_object_p): Use that in elf32-x86-64-nacl definition.
binutils/
* objdump.c (dump_dwarf): Grok bfd_mach_x86_64_nacl and
bfd_mach_x64_32_nacl as equivalent to bfd_mach_x86_64.
ld/testsuite/
* ld-x86-64/x86-64.exp (mixed1, mixed2): Loosen error string match
so it accepts "i386:nacl" in place of "i386".
* ld-x86-64/ilp32-2.d: Likewise.
* ld-x86-64/ilp32-3.d: Likewise.
* ld-x86-64/lp64-2.d: Likewise.
* ld-x86-64/lp64-3.d: Likewise.
I can't see any good reason why anyone would want a dynamic .TOC., so
hide it in a way that is respected by _bfd_elf_export_symbol. This
also fixes an abort in relocate_section on not finding sreloc for .TOC.
* elf64-ppc.c (ppc64_elf_func_desc_adjust): Make .TOC. defined and
hidden.
(ppc64_elf_set_toc): Adjust.
These shortcuts to dynamic sections in ppc_link_hash_table predated
their geneneric elf hash table equivalents.
* elf64-ppc.c (struct ppc_link_hash_table): Remove got, plt, relplt,
iplt, reliplt. Update all references to use elf.sgot, elf.splt,
elf.srelplt, elf.iplt and elf.irelplt.
Changing addis r2,r12,..; addi r2,r2,.. to lis r2,..; addi r2,r2..
in non-PIC executables has the benefit of removing a dependency on r12.
bfd/
* elf64-ppc.c (ppc64_elf_relocate_section): Edit global entry
prologue to non-PIC in non-PIC executables.
ld/testsuite/
* ld-powerpc/elfv2exe.d: Adjust for non-PIC global entry.
In a non-pic executable, ELFv2 like other targets, needs to emit a plt
entry even for non-call references to functions defined in shared
libraries, and define the function on the plt code.
* elf64-ppc.c (ppc64_elf_copy_indirect_symbol): Copy
pointer_equality_needed flag.
(ppc64_elf_check_relocs): For ELFv2 arrange to emit plt
entries for references to functions in shared libraries on
non-call relocs.
(readonly_dynrelocs): Split into function of the same name and..
(maybe_set_textrel): ..this new function. Update call.
(ppc64_elf_adjust_dynamic_symbol): Don't emit dynrelocs for
ELFv2 in most cases if we have a plt entry. Use new
readonly_relocs.
(allocate_dynrelocs): For ELFv2, don't allocate dynreloc space
for ifunc in static executables.
(size_global_entry_stubs): New function.
(ppc64_elf_size_dynamic_sections): Call size_global_entry_stubs.
Save end of glink branch table.
(ppc64_elf_hash_symbol): New function.
(build_global_entry_stubs): New function.
(ppc64_elf_build_stubs): Call build_global_entry_stubs. Adjust
glink sizing.
(ppc64_elf_relocate_section): Tidy plt16/32/64 reloc code.
(ppc64_elf_finish_dynamic_symbol): For ELFv2, adjust symbols
defined on plt code.
Every function has a nominal toc pointer value, even if it isn't used,
so set toc_off for every code section to the value used in that object
file. The thinking here was that if a code section didn't use the toc
it could use the previous object file's toc pointer value. It can,
but doing so is only a gain if functions in that section are called
mostly from previous objects sharing the same toc. We lose if the
functions in question are called mostly from the current object or
following objects, and it's a good bet they will probably mostly be
called from the current object.
* elf64-ppc.c (ppc64_elf_next_input_section): Always set toc_off
to value for object file.
bfd/
* elf-nacl.c (segment_eligible_for_headers): Drop requirement that
some section have SEC_HAS_CONTENTS set. It's not set for
.note.gnu.build-id, and a segment of only read-only SHT_NOBITS
sections is implausible and not really supportable anyway.
This removes the DT_PPC_TLSOPT/DT_PPC64_TLSOPT dynamic tag and replaces
it with DT_PPC_OPT/DT_PPC64_OPT tag to provide the same functionality
and more. This isn't backwards compatible, but the TLSOPT tag hasn't
been used since the tls optimisation support was never submitted to
glibc.
/include/elf/
* ppc.h (DT_PPC_TLSOPT): Delete.
(DT_PPC_OPT, PPC_OPT_TLS): Define.
* ppc64.h (DT_PPC64_TLSOPT): Delete.
(DT_PPC64_OPT, PPC64_OPT_TLS, PPC64_OPT_MULTI_TOC): Define.
bfd/
* elf32-ppc.c (ppc_elf_size_dynamic_sections): Use new DT_PPC_OPT
tag to specify tls optimisation.
* elf64-ppc.c (ppc64_elf_size_dynamic_sections): Likewise.
(ppc64_elf_finish_dynamic_sections): Specify whether multiple
toc pointers are used via DT_PPC64_OPT.
binutils/
* readelf.c (get_ppc_dynamic_type): Replace PPC_TLSOPT with PPC_OPT.
(get_ppc64_dynamic_type): Replace PPC64_TLSOPT with PPC64_OPT.
The toc pointer save slot changes on ELFv2 from 40(1) to 24(1).
* elf64-ppc.c (STK_LR, STK_TOC, STK_LINKER): Define.
(savegpr0_tail, restgpr0_tail, savefpr0_tail, restfpr0_tail)
build_plt_stub, build_tls_get_addr_stub, ppc_build_one_stub,
ppc64_elf_relocate_section): Use new defines.
An ELFv2 PLT entry is simply the address of the target function rather
than three (or two) words to specify entry, toc and static chain. PLT
call stubs are correspondingly simpler and need no thread safety
barrier. The glink resolver stub and branch table also is simplified,
a change that could be applied to ELFv1 too, but isn't as yet.
* elf64-ppc.c (PLT_ENTRY_SIZE, PLT_INITIAL_ENTRY_SIZE): Add htab
parameter and adjust for ELFv2. Update all uses.
(PLT_CALL_STUB_SIZE): Delete.
(ppc64_elf_get_synthetic_symtab): Support new glink layout.
(allocate_dynrelocs): Likewise.
(plt_stub_size, build_plt_stub): Adjust for ELFv2.
(get_r2off): Return 0 for ELFv2 -R.
(ppc_build_one_stub, ppc_size_one_stub): Adjust for ELFv2.
(ppc64_elf_size_stubs): Likewise.
(ppc64_elf_build_stubs): Add new ELFv2 glink.
This defines the ELF symbol st_other field used to encode the number
of instructions between a function "global entry" and its "local entry",
and adds support related to the local entry offset.
include/elf/
* ppc64.h (STO_PPC64_LOCAL_BIT, STO_PPC64_LOCAL_MASK): Define.
(ppc64_decode_local_entry, ppc64_encode_local_entry): New functions.
(PPC64_LOCAL_ENTRY_OFFSET, PPC64_SET_LOCAL_ENTRY_OFFSET): Define.
bfd/
* elf64-ppc.c (struct ppc_stub_hash_entry): Add "other".
(stub_hash_newfunc): Init new ppc_stub_hash_entry field, and one
we forgot, "plt_ent".
(ppc64_elf_add_symbol_hook): Check ELFv1 objects don't have
st_other bits only valid in ELFv2.
(ppc64_elf_merge_symbol_attribute): New function.
(ppc_type_of_stub): Add local_off param to test branch range.
(ppc_build_one_stub): Adjust destinations for ELFv2 locals.
(ppc_size_one_stub, toc_adjusting_stub_needed): Similarly.
(ppc64_elf_size_stubs): Pass local_off to ppc_type_of_stub.
Set "other" field.
(ppc64_elf_relocate_section): Adjust destination for ELFv2 local
calls.
gas/
* config/tc-ppc.c (md_pseudo_table): Add .localentry.
(ppc_elf_localentry): New function.
(ppc_force_relocation): Force relocs on all branches to localenty
symbols.
(ppc_fix_adjustable): Don't reduce such symbols to section+offset.
binutils/
* readelf.c (get_ppc64_symbol_other): New function.
(get_symbol_other): Use it for EM_PPC64.
Defines bits in ELF e_flags to differentiate ELFv2 objects from ELFv2,
adds .abiversion directive to explicitly choose the ABI, and code to
check and automatically select ABI.
include/elf/
* ppc64.h (EF_PPC64_ABI): Define.
bfd/
* elf64-ppc.c (abiversion, set_abiversion): New functions.
(ppc64_elf_get_synthetic_symtab): Handle ELFv2 objects without .opd.
(struct ppc_link_hash_table): Add opd_abi.
(ppc64_elf_check_relocs): Check no .opd with ELFv2.
(ppc64_elf_merge_private_bfd_data): New function.
(ppc64_elf_print_private_bfd_data): New function.
(ppc64_elf_tls_setup): Set htab->opd_abi.
(ppc64_elf_size_dynamic_sections): Don't emit OPD related dynamic
tags for ELFv2.
(ppc_build_one_stub): Use R_PPC64_IRELATIVE for ELFv2 ifunc.
(ppc64_elf_finish_dynamic_symbol): Likewise
binutils/
* readelf.c (get_machine_flags): Display ABI version for EM_PPC64.
gas/
* config/tc-ppc.c: Include elf/ppc64.h.
(ppc_abiversion): New variable.
(md_pseudo_table): Add .abiversion.
(ppc_elf_abiversion, ppc_elf_end): New functions.
* config/tc-ppc.h (md_end): Define.
This change is to support the new ELFv2 ABI, which uses the value in
r12 on function entry to calculate the got/toc pointer.
bfd/
* elf64-ppc.c (build_plt_stub): Switch stubs to use r11 as base
reg and r12 as destination.
(ppc_build_one_stub): Likewise.
(ppc64_elf_build_stubs): Likewise for glink.
ld/testsuite/
* ld-powerpc/tls.s: Add proper .opd entry for _start.
* ld-powerpc/tlstoc.s: Likewise.
* ld-powerpc/relbrlt.d: Update for changed stubs.
* ld-powerpc/tls.d: Update for changed stubs and _start .opd entry.
* ld-powerpc/tls.g: Likewise.
* ld-powerpc/tlsexe.d: Likewise.
* ld-powerpc/tlsexe.g: Likewise.
* ld-powerpc/tlsexe.r: Likewise.
* ld-powerpc/tlsexetoc.d: Likewise.
* ld-powerpc/tlsexetoc.g: Likewise.
* ld-powerpc/tlsexetoc.r: Likewise.
* ld-powerpc/tlsso.d: Likewise.
* ld-powerpc/tlsso.g: Likewise.
* ld-powerpc/tlsso.r: Likewise.
* ld-powerpc/tlstoc.d: Likewise.
* ld-powerpc/tlstoc.g: Likewise.
* ld-powerpc/tlstocso.d: Likewise.
* ld-powerpc/tlstocso.g: Likewise.
* ld-powerpc/tlstocso.r: Likewise.
This changes the behaviour of @h and @ha on PowerPC64 to report errors
on 32-bit overflow. The motivation for this change is that on
PowerPC64, most uses of @h and @ha modifiers and their corresponding
relocations are to build up 32-bit offsets. We'd like to know when
such offsets overflow. Only rarely do people use @h or @ha with the
high 32-bit modifiers to build a 64-bit constant. Those uses will now
need to use two new modifiers, @high and @higha, if the constant isn't
known at assembly time. For now, we won't report overflow at assembly
time..
This also fixes an error when applying some of the HIGHER and HIGHEST
relocations.
include/elf/
* ppc64.h (R_PPC64_ADDR16_HIGH, R_PPC64_ADDR16_HIGHA,
R_PPC64_TPREL16_HIGH, R_PPC64_TPREL16_HIGHA,
R_PPC64_DTPREL16_HIGH, R_PPC64_DTPREL16_HIGHA): New.
(IS_PPC64_TLS_RELOC): Match new tls relocs.
bfd/
* reloc.c (BFD_RELOC_PPC64_ADDR16_HIGH, BFD_RELOC_PPC64_ADDR16_HIGHA,
BFD_RELOC_PPC64_TPREL16_HIGH, BFD_RELOC_PPC64_TPREL16_HIGHA,
BFD_RELOC_PPC64_DTPREL16_HIGH, BFD_RELOC_PPC64_DTPREL16_HIGHA): New.
* elf64-ppc.c (ppc64_elf_howto_raw): Add entries for new relocs.
Make all _HA and _HI relocs report signed overflow.
(ppc64_elf_reloc_type_lookup): Handle new relocs.
(must_be_dyn_reloc, ppc64_elf_check_relocs): Likewise.
(dec_dynrel_count, ppc64_elf_relocate_section): Likewise.
(ppc64_elf_relocate_section): Don't apply 0x8000 adjust to
R_PPC64_TPREL16_HIGHER, R_PPC64_TPREL16_HIGHEST,
R_PPC64_DTPREL16_HIGHER, and R_PPC64_DTPREL16_HIGHEST.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
gas/
* config/tc-ppc.c (SEX16): Don't mask.
(REPORT_OVERFLOW_HI): Define as zero.
(ppc_elf_suffix): Support @high, @higha, @dtprel@high, @dtprel@higha,
@tprel@high, and @tprel@higha modifiers.
(md_assemble): Ignore X_unsigned when applying 16-bit insn fields.
Add (disabled) code to check @h and @ha reloc overflow for powerpc64.
Handle new relocs.
(md_apply_fix): Similarly.
elfcpp/
* powerpc.h (R_PPC64_ADDR16_HIGH, R_PPC64_ADDR16_HIGHA,
R_PPC64_TPREL16_HIGH, R_PPC64_TPREL16_HIGHA,
R_PPC64_DTPREL16_HIGH, R_PPC64_DTPREL16_HIGHA): Define.
gold/
* powerpc.cc (Target_powerpc::Scan::check_non_pic): Handle new relocs.
(Target_powerpc::Scan::global, local): Likewise.
(Target_powerpc::Relocate::relocate): Likewise. Check for overflow
on all ppc64 @h and @ha relocs.
There's no real need to emit these always: They're needed only if we
indeed want to emit a localized symbol. Hence defer emission until we
at least did the basic early checks that would lead to no such symbol
getting emitted. This in particular avoids emitting such a symbol in
the majority of (if not all) "ld -r" cases.
I hope my set of cross build tests caught all the test cases needing
adjustment - please forgive if I missed a few.
bfd/
2013-10-29 Jan Beulich <jbeulich@suse.com>
* elflink.c (struct elf_outext_info): Add field file_sym_done.
(bfd_elf_final_link): Initialize new field. Move fake STT_FILE
symbol emission from here ...
(elf_link_output_extsym): ... to here.
gas/testsuite/
2013-10-29 Jan Beulich <jbeulich@suse.com>
* gas/microblaze/relax_size.elf: Drop expectation of no longer
present STT_FILE symbol.
* gas/microblaze/relax_size2.elf: Likewise.
ld/testsuite/
2013-10-29 Jan Beulich <jbeulich@suse.com>
* ld-cris/tls-e-tpoffcomm1.d: Drop expectation of no longer
present STT_FILE symbol.
* ld-mmix/bpo-18.d: Likewise.
* ld-mmix/bpo-22.d: Likewise.
* ld-mmix/greg-6.d: Likewise.
* ld-mmix/greg-7.d: Likewise.
* ld-mmix/loc4.d: Likewise.
* ld-mmix/local1.d: Likewise.
* ld-mmix/local3.d: Likewise.
* ld-mmix/local5.d: Likewise.
* ld-mmix/local7.d: Likewise.
* ld-mmix/loct-1.d: Likewise.
* ld-sh/sh64/abi32.xd: Likewise.
* ld-sh/sh64/abi64.xd: Likewise.
* ld-sh/sh64/cmpct1.xd: Likewise.
* ld-sh/sh64/crange1.rd: Likewise.
* ld-sh/sh64/crange2.rd: Likewise.
* ld-sh/sh64/crange3-cmpct.rd: Likewise.
* ld-sh/sh64/crange3-media.rd: Likewise.
* ld-sh/sh64/crange3.rd: Likewise.
* ld-sh/sh64/crangerel1.rd: Likewise.
* ld-sh/sh64/crangerel2.rd: Likewise.
* ld-sh/sh64/mix1.xd: Likewise.
* ld-sh/sh64/mix2.xd: Likewise.
* ld-sh/sh64/shdl32.xd: Likewise.
* ld-sh/sh64/shdl64.xd: Likewise.
* dwarf2.c (lookup_address_in_line_info_table): Change return type
to be the range of addresses covered by the table.
(comp_unit_find_nearest_line): Likewise.
(find_line): Search all CUs. Select the one that matches and
covers the smallest address range.
* elfxx-mips.c (mips_elf_obj_tdata): Add abi_msa_bfd.
(mips_elf_merge_obj_attributes): Set abi_msa_bfd to the first object
file that has a Tag_GNU_MIPS_ABI_MSA attribute.
Merge Tag_GNU_MIPS_ABI_MSA attributes.
* elfxx-mips.c (mips_use_local_got_p): New function.
(mips_elf_count_got_symbols, mips_elf_calculate_relocation): Use it.
(_bfd_mips_elf_check_relocs): Set pointer_equality_needed for
GOT and absolute references.
ld/testsuite/
* ld-mips-elf/pic-and-nonpic-6-n32.ad,
ld-mips-elf/pic-and-nonpic-6-n32.dd,
ld-mips-elf/pic-and-nonpic-6-n32.gd,
ld-mips-elf/pic-and-nonpic-6-n32.nd,
ld-mips-elf/pic-and-nonpic-6-n32.rd,
ld-mips-elf/pic-and-nonpic-6-n64.ad,
ld-mips-elf/pic-and-nonpic-6-n64.dd,
ld-mips-elf/pic-and-nonpic-6-n64.gd,
ld-mips-elf/pic-and-nonpic-6-n64.nd,
ld-mips-elf/pic-and-nonpic-6-n64.rd,
ld-mips-elf/pic-and-nonpic-6-o32.ad,
ld-mips-elf/pic-and-nonpic-6-o32.dd,
ld-mips-elf/pic-and-nonpic-6-o32.gd,
ld-mips-elf/pic-and-nonpic-6-o32.nd,
ld-mips-elf/pic-and-nonpic-6-o32.rd: Fix symbol value of extf4.
No longer expect extf3, extf4 and extd2 to be in the global GOT.
* bfd-in2.h: Rebuild.
* opncls.c (bfd_get_alt_debug_link_info): Change type of
buildid_len to bfd_size_type.
gdb
* dwarf2read.c (dwarf2_get_dwz_file): Update for type change in
bfd_get_alt_debug_link_info.
This patch fixes gdb PR symtab/15597.
The bug is that the .gnu_debugaltlink section includes the build-id of
the alt file, but gdb does not use it.
This patch fixes the problem by changing gdb to do what it ought to
always have done: verify the build id of the file found using the
filename in .gnu_debugaltlink; and if that does not match, try to find
the correct debug file using the build-id and debug-file-directory.
This patch touches BFD. Previously, gdb had its own code for parsing
.gnu_debugaltlink; I changed it to use the BFD functions after those
were introduced. However, the BFD functions are incorrect -- they
assume that .gnu_debugaltlink is formatted like .gnu_debuglink.
However, it it is not. Instead, it consists of a file name followed
by the build-id -- no alignment, and the build-id is not a CRC.
Fixing this properly is a bit of a pain. But, because
separate_alt_debug_file_exists just has a FIXME for the build-id case,
I did not fix it properly. Instead I introduced a hack. This leaves
BFD working just as well as it did before my patch.
I'm willing to do something better here but I could use some guidance
as to what. It seems that the build-id code in BFD is largely punted
on.
FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of
BFD itself.
I moved the build-id logic out of elfread.c and into a new file.
This seemed cleanest to me.
Writing a test case was a bit of a pain. I added a couple new
features to the DWARF assembler to handle this.
Built and regtested on x86-64 Fedora 18.
* bfd-in2.h: Rebuild.
* opncls.c (bfd_get_alt_debug_link_info): Add buildid_len
parameter. Change type of buildid_out. Update.
(get_alt_debug_link_info_shim): New function.
(bfd_follow_gnu_debuglink): Use it.
* Makefile.in (SFILES): Add build-id.c.
(HFILES_NO_SRCDIR): Add build-id.h.
* build-id.c: New file, largely from elfread.c. Modified
most functions.
* build-id.h: New file.
* dwarf2read.c (dwarf2_get_dwz_file): Update for change to
bfd_get_alt_debug_link_info. Verify dwz file's build-id.
Search for dwz file using build-id.
* elfread.c (build_id_bfd_get, build_id_verify)
(build_id_to_debug_filename, find_separate_debug_file): Remove.
* gdb.dwarf2/dwzbuildid.exp: New file.
* lib/dwarf.exp (Dwarf::_section): Add "flags" and "type"
parameters.
(Dwarf::_defer_output): Change "section" parameter to
"section_spec"; update.
(Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New
procs.
Alan Modra
Barney Stratford
Nick Clifton
Philippe De Muyter
Kyle McMartin
Will Newton
Omair Javaid
Kai Tietz
Joel Brobecker
DJ Delorie
Tristan Gingold
Ryan Mansfield
Jon Turney
Kaushik Phata
Hans-Peter Nilsson
Volodymyr Arbatov
Andreas Tobler
Andrew Bennett
Richard Sandiford
Christian Svensson
Yuanhui Zhang
Richard Henderson
Kwok Cheung Yeung
Marcus Shawcroft
Sandra Loosemore
Denis Chertykov
Maria Guseva
Yury Gribov
Tristan Gingold
Pedro Alves
Chung-Lin Tang
H.J. Lu
Jack Carter
Jan Kratochvil
Rainer Orth
Christophe Lyon
Ma Jiang
Tom Tromey
Ilya Tocar
Pierre Muller
Pierre Muller
Andreas Schwab
Kuan-Lin Chen
Cory Fields
Roland McGrath
Yufeng Zhang
Jan Beulich
Hans-Peter Nilsson
Chao-ying Fu
Roland McGrath
Sergio Durigan Junior
Andreas Schwab
Jan-Benedict Glaw
Will Newton
Andrew Pinski