* config.bfd (mips*el*-*-linux-gnu*): Use traditional little
endian MIPS ELF target.
* config.bfd (mips*-*-linux-gnu*): Use traditional big endian
MIPS ELF target.
* configure.in (bfd_elf64_tradbigmips_vec): New. Traditional
64bit big endian MIPS ELF target.
(bfd_elf64_tradlittlemips_vec): New. Traditional 64bit little
endian MIPS ELF target.
* configure: Regenerated.
* elf32-mips.c (IRIX_COMPAT): Handle traditional 64bit and
little endian targets.
(mips_elf_sym_is_global): Handle traditional targets.
* elf64-mips.c (bfd_elf64_tradbigmips_vec): New. Traditional
64bit big endian MIPS ELF target.
(bfd_elf64_tradlittlemips_vec): New. Traditional 64bit little
endian MIPS ELF target.
* targets.c: (_bfd_target_vector): Add bfd_elf64_tradbigmips_vec
and bfd_elf64_tradlittlemips_vec.
* configure.in: Recognize FreeBSD/arm, FreeBSD/PowerPC, and treat
FreeBSD/i386-CURRENT differently until I can figure out the needed
corefile changes.
* configure: Regenerate.
* config.bfd: Recognize FreeBSD/x86-64, FreeBSD/ia64, FreeBSD/arm,
FreeBSD/PowerPC, and FreeBSD/sparc64.
Approved by: Philip Blundell <philb@gnu.org>
Message-Id: <E14URxF-00023n-00@kings-cross.london.uk.eu.org>
as _bfd_XXi_only_swap_filehdr_out.
(pe_mkobject) [PEI_FORCE_MINIMUM_ALIGNMENT]: Set
pe->force_minimum_alignment to TRUE.
(pe_mkobject) [PEI_TARGET_SUBSYSTEM]: Set pe->target_subsystem to
PEI_TARGET_SUBSYSTEM.
(pe_print_private_bfd_data): Call
_bfd_XX_print_private_bfd_data_common() instead of
_bfd_pe_print_private_bfd_data_common().
(pe_bfd_copy_private_bfd_data): Call
_bfd_XX_bfd_copy_private_bfd_data_common() instead of
_bfd_pe_bfd_copy_private_bfd_data_common().
(coff_bfd_copy_private_section_data): Define as
_bfd_XX_bfd_copy_private_section_data instead of
_bfd_pe_bfd_copy_private_section_data.
(coff_get_symbol_info): Define as _bfd_XX_get_symbol_info instead
of a _bfd_pe_get_symbol_info.
* peigen.c: Delete.
* peXXigen.c: Renamed from peigen.c.
(COFF_WITH_XX): Define this macro (will get expanded into
COFF_WITH_pep or COFF_WITH_pe, depending on whether this is being
compiled as peigen.c or pepigen.c.
[COFF_WITH_pep]: Include "coff/ia64.h" instead of "coff/i386.h" to
define the canonical PEP structures and definitions.
(_bfd_XXi_swap_aouthdr_out): If pe->force_minimum_alignment is in
effect, enforce minimum file and section alignments. If
extra->Subsystem is IMAGE_SUBSYSTEM_UNKNOWN, set it to
pe->target_subsystem (this defaults to IMAGE_SUBSYSTEM_UNKNOWN,
so, by default, this is a no-op).
* libpei.h: Rename COFF_WITH_PEP to COFF_WITH_pep.
(_bfd_XX_bfd_copy_private_bfd_data_common): Add macros to map
_bfd_XXfoo to _bfd_pepfoo if COFF_WIT_PEP is defined and to
_bfd_pefoo if it's not defined. Use these macros to define
coff swap macros.
* libcoff.h (pe_tdata): Add members target_subsystem and
force_minimum_alignment.
* efi-app-ia64.c (COFF_WITH_pep): Rename COFF_WITH_PEP to
COFF_WITH_pep.
(PEI_TARGET_SUBSYSTEM): Rename from PEI_DEFAULT_TARGET_SUBSYSTEM.
* configure.in (bfd_efi_app_ia64_vec): Use pepigen.lo instead of
peigen.lo.
* coff-ia64.c: Rename COFF_WITH_PEP to COFF_WITH_pep.
(AOUTSZ): Rename PEP64AOUTSZ and PEP64AOUTHDR to PEPAOUTSZ and
PEPAOUTHDR.
* Makefile.in (BFD64_BACKENDS): Mention pepigen.lo.
(BFD64_BACKENDS_CFILES): Mention pepigen.c
(peigen.c): Add rule to generate from peXXigen.c.
(pepigen.c): Ditto.
(pepigen.lo): List dependencies for pepigen.lo.
* unwind-ia64.c (unw_decode_x1): Declare code arg with
ATTRIBUTE_UNUSED.
(unw_decode_x2): Ditto.
(unw_decode_x3): Ditto.
(unw_decode_x4): Ditto.
* pe.h (PEPAOUTSZ): Rename from PEP64AOUTSZ.
Rename from PEPAOUTHDR.
* configure.in: Recognize alpha-*-freebsd*.
* configure: Regenerate.
I had this in my local tree for along time and had gotten approval for this
on Mon, 22 May 2000 15:45:01 -0700 but somehow managed to never commit it.
Approved by: Nick Clifton <nickc@cygnus.com>
Message-Id: <200005222245.PAA14600@elmo.cygnus.com>
underscore on symbols. Make sure to only link same kind.
* elf32-cris.c (cris_elf_object_p,
cris_elf_final_write_processing, cris_elf_print_private_bfd_data,
cris_elf_merge_private_bfd_data): New.
(elf_backend_object_p, elf_backend_final_write_processing,
bfd_elf32_bfd_print_private_bfd_data,
bfd_elf32_bfd_merge_private_bfd_data): Define.
<Target vector definition>: Include elf32-target.h twice with
different macro settings:
(TARGET_LITTLE_SYM): First as bfd_elf32_cris_vec, then as
bfd_elf32_us_cris_vec.
(TARGET_LITTLE_NAME): First as "elf32-cris", then "elf32-us-cris".
(elf_symbol_leading_char): First as 0, then '_'.
(INCLUDED_TARGET_FILE): Define for second include of elf32-target.h.
* config.bfd (cris-*-*): Add bfd_elf32_us_cris_vec to targ_selvecs.
* configure.in (bfd_elf32_cris_vec, cris_aout_vec): New vector.
* configure: Regenerate.
* targets.c: Declare bfd_elf32_us_cris_vec.
* po/bfd.pot: Regenerate.
* include/opcode/i860.h (btne, bte, bla): Changed these opcodes
to use sbroff ('r') instead of split16 ('s').
(J, K, L, M): New operand types for 16-bit aligned fields.
(ld.x, {p}fld.x, fst.x, pst.d): Changed these opcodes to
use I, J, K, L, M instead of just I.
(T, U): New operand types for split 16-bit aligned fields.
(st.x): Changed these opcodes to use S, T, U instead of just S.
(andh, andnoth, orh, xorh): Deleted 3-register forms as they do not
exist on the i860.
(pfgt.sd, pfle.sd): Deleted these as they do not exist on the i860.
(pfeq.ss, pfeq.dd): New opcodes.
(st.s): Fixed incorrect mask bits.
(fmlow): Fixed incorrect mask bits.
(fzchkl, pfzchkl): Fixed incorrect mask bits.
(faddz, pfaddz): Fixed incorrect mask bits.
(form, pform): Fixed incorrect mask bits.
(pfld.l): Fixed incorrect mask bits.
(fst.q): Fixed incorrect mask bits.
(all floating point opcodes): Fixed incorrect mask bits for
handling of dual bit.
* include/elf/i860.h: New file.
(elf_i860_reloc_type): Defined ELF32 i860 relocations.
* bfd/cpu-i860.c: Added comments.
* bfd/elf32-i860.c (TARGET_LITTLE_SYM): Defined to
bfd_elf32_i860_little_vec.
(TARGET_LITTLE_NAME): Defined to "elf32-i860-little".
(ELF_MAXPAGESIZE): Changed to 4096.
* bfd/targets.c (bfd_elf32_i860_little_vec): Declaration of
new target.
(bfd_target_vector): Added bfd_elf32_i860_little_vec.
* bfd/config.bfd (i860-stardent-sysv4*, i860-stardent-elf*): Added
config for little endian elf32 i860.
(targ_defvec): Define for the new config above
as "bfd_elf32_i860_little_vec".
(targ_selvecs): Define for the new config above
as "bfd_elf32_i860_vec bfd_elf32_i860_little_vec"
* bfd/configure.in (bfd_elf32_i860_little_vec): Added recognition
of new target vec.
* bfd/configure: Regenerated.
* opcodes/i860-dis.c: New file.
(print_insn_i860): New function.
(print_br_address): New function.
(sign_extend): New function.
(BITWISE_OP): New macro.
(I860_REG_PREFIX): New macro.
(grnames, frnames, crnames): New structures.
* opcodes/disassemble.c (ARCH_i860): Define.
(disassembler): Add check for bfd_arch_i860 to set disassemble
function to print_insn_i860.
* include/dis-asm.h (print_insn_i860): Add prototype.
* opcodes/Makefile.in (CFILES): Added i860-dis.c.
(ALL_MACHINES): Added i860-dis.lo.
(i860-dis.lo): New dependences.
* opcodes/configure.in: New bits for bfd_i860_arch.
* opcodes/configure: Regenerated.
* config.bfd: Change targ_defvec and targ_selvecs for mips*-*-sysv4*
to add a new target for traditional mips i.e
bfd_elf32_tradbigmips_vec and bfd_elf32_tradlittlemips_vec.
* configure.in: Likewise.
* configure: Rebuild.
* targets.c (bfd_elf32_tradbigmips_vec): Declare and put in
bfd_target_vector.
(bfd_elf32_tradlittlemips_vec): Likewise.
* elfxx-target.h: Add macro INCLUDED_TARGET_FILE which is more a test
to see that elfNN_bed does not get redefined even if the target file
is included twice for a chip. See elf32-mips.c.
bfd:
* Makefile.am (coff64-rs6000.lo): New rule.
* Makefile.in: Regenerate.
* coff-rs6000.c (xcoff_mkobject, xcoff_copy_private_bfd_data,
xcoff_is_local_label_name, xcoff_rtype2howto,
xcoff_reloc_type_lookup, xcoff_slurp_armap, xcoff_archive_p,
xcoff_read_ar_hdr, xcoff_openr_next_archived_file, xcoff_write_armap,
xcoff_write_archive_contents): No longer static, and prefix with _bfd_.
(NO_COFF_SYMBOLS): Define.
(xcoff64_swap_sym_in, xcoff64_swap_sym_out, xcoff64_swap_aux_in,
xcoff64_swap_aux_out): New functions; handle xcoff symbol tables
internally.
(MINUS_ONE): New macro.
(xcoff_howto_tabl, xcoff_reloc_type_lookup): Add 64 bit POS
relocation.
(coff_SWAP_sym_in, coff_SWAP_sym_out, coff_SWAP_aux_in,
coff_SWAP_aux_out): Map to the new functions.
* coff64-rs6000.c: New file.
* libcoff.h (bfd_coff_backend_data): Add new fields
_bfd_coff_force_symnames_in_strings and
_bfd_coff_debug_string_prefix_length.
(bfd_coff_force_symnames_in_strings,
bfd_coff_debug_string_prefix_length): New macros for above fields.
* coffcode.h (coff_set_arch_mach_hook): Handle XCOFF64 magic.
Set machine to 620 for XCOFF64. Use bfd_coff_swap_sym_in instead
of using coff_swap_sym_in directly.
(FORCE_SYMNAMES_IN_STRINGS): New macro, defined for XCOFF64.
(coff_set_flags) Set magic for XCOFF64.
(coff_compute_section_file_positions): Add symbol name length to
string section length if bfd_coff_debug_string_prefix_length is
true.
(coff_write_object_contents): Don't do reloc overflow for XCOFF64.
(coff_slurp_line_table): Use bfd_coff_swap_lineno_in instead of
using coff_swap_lineno_in directly.
(bfd_coff_backend_data): Add _bfd_coff_force_symnames_in_strings
and _bfd_coff_debug_string_prefix_length fields.
* coffgen.c (coff_fix_symbol_name, coff_write_symbols): Force
symbol names into strings table when
bfd_coff_force_symnames_in_strings is true.
* coffswap.h (MAX_SCNHDR_NRELOC, MAX_SCNHDR_NLNNO, GET_RELOC_VADDR,
SET_RELOC_VADDR): New macros.
(coff_swap_reloc_in, coff_swap_reloc_out): Use above macros.
(coff_swap_aux_in, coff_swap_aux_out): Remove RS6000COFF_C
code.
(coff_swap_aouthdr_in, coff_swap_aouthdr_out): Handle XCOFF64
changes within RS6000COFF_C specific code.
(coff_swap_scnhdr_out): Use PUT_SCNHDR_NLNNO, PUT_SCNHDR_NRELOC,
MAX_SCNHDR_NRELOC, and MAX_SCNHDR_NLNNO.
* reloc.c (bfd_perform_relocation, bfd_install_relocation):
Extend existing hack on target name.
* xcofflink.c (XCOFF_XVECP): Extend existing hack on
target name.
* coff-tic54x.c (ticof): Keep up to date with new fields
in bfd_coff_backend_data.
* config.bfd: Add bfd_powerpc_64_arch to targ_arch and define
targ_selvecs to include rs6000coff64_vec for rs6000.
* configure.in: Add rs6000coff64_vec case.
* cpu-powerpc.c: New bfd_arch_info_type.
gas:
* as.c (parse_args): Allow md_parse_option to override -a listing
option.
* config/obj-coff.c (add_lineno): Change type of offset parameter
from "int" to "bfd_vma."
* config/tc-ppc.c (md_pseudo_table): Add "llong" and "machine."
(ppc_mach, ppc_subseg_align, ppc_target_format): New.
(ppc_change_csect): Align correctly for XCOFF64.
(ppc_machine): New function, which discards "ppc_machine" line.
(ppc_tc): Cons for 8 when code is 64 bit.
(md_apply_fix3): Don't check operand->insert. Handle 64 bit
relocations.
(md_parse_option): Handle -a64 and -a32.
(ppc_xcoff64): New.
* config/tc-ppc.h (TARGET_MACH): Define.
(TARGET_FORMAT): Move to function.
(SUB_SEGMENT_ALIGN): Use ppc_subseg_align.
include:
* include/coff/rs6k64.h: New file.
opcodes:
* configure.in: Add bfd_powerpc_64_arch.
* disassemble.c (disassembler): Use print_insn_big_powerpc for
64 bit code.
Add ``-W -Wall'' to sub-directories bfd, binutils, gas gprof, ld and
opcodes by the addition of WARN_CFLAGS to Makefile.am and configury to
set it. Add configure option --enable-build-warnings.
Re-generate all and sundry using auto*-000227.
* targets.c (cisco_core_vec): Replaced with two new vecs ...
(cisco_core_big_vec): Add new bigendian vec.
(cisco_core_little_vec): Add new little endian vec.
* cisco-core.c (CRASH_INFO): Fixed offset replaced with ...
(crash_info_locs): Add array of possible offsets.
(MASK_ADDR): Mask to apply to crash info offset.
(crashinfo_external): Add textbase, database, bssbase and
turn into a typedef.
(cisco_core_file_validate): Renamed from cisco_core_file_p.
Many small changes to account for additional hardware versions.
Pick a reasonable size for ".reg" section. Add a ".crash"
section to allow access to crashinfo_external struct.
(cisco_core_file_p): New version of this function that
iterates over crash_info_locs, calling cisco_core_file_validate.
(cisco_core_vec): Old big endian only vec replaced with ...
(cisco_core_big_vec): Add big endian version.
(cisco_core_little_vec): Add little endian version.
* configure.in (cisco_core_vec): Split to two new vectors ...
(cisco_core_big_vec): New target vector.
(cisco_core_little_vec): New target vector.
* configure: Regenerate.
* config.bfd (targ): For m68*-*-aout* targ, change cisco_core_vec
to cisco_core_big_vec in targ_selvecs.
* libpei.h: New file, broken out of peicode.h.
* peigen.c: New file, broken out of peicode.h.
* peicode.h: A bunch of code moved out to libpei.h and peigen.c.
* configure.in: Add peigen.lo to list of files required for each
PE target.
* Makefile.am: Rebuild dependencies.
(BFD32_BACKENDS): Add peigen.lo.
(BFD32_BACKENDS_CFILES): Add peigen.c.
(SOURCE_HFILES): Add libpei.h.
* configure, Makefile.in: Rebuild.
* archive.c: Define getuid and getgid as macros if HAVE_GETUID or
HAVE_GETGID are not defined, respectively.
(bfd_write_armap): Don't special case on _WIN32 for getuid and
getgid.
* configure.host: Set ac_cv_func_get{ug}id for *-*-windows*.
* configure, config.in: Rebuild.
