Currently "maint time" will print the amount of time a command took.
Sometimes, though, it's useful to have a timestamp as well -- for
example if one is correlating a gdb log with some other log.
This patch adds a timestamp to the start and end of each command when
this setting is in effect.
This also removes a "//" comment and changes scoped_command_stats to
use DISABLE_COPY_AND_ASSIGN; two minor things I noticed while working
on the patch.
Tested on x86-64 Fedora 29.
gdb/ChangeLog
2019-06-06 Tom Tromey <tromey@adacore.com>
* maint.h (class scoped_command_stats): Use
DISABLE_COPY_AND_ASSIGN.
<print_time>: New method.
* maint.c (scoped_command_stats, ~scoped_command_stats): Call
print_time.
(scoped_command_stats::print_time): New method.
gdb/testsuite/ChangeLog
2019-06-06 Tom Tromey <tromey@adacore.com>
* gdb.base/maint.exp: Expect command started/finished output.
If the new GNU property section was being created by the linker
(this will happen only if none of the inputs have any GNU property
section but the command line to the linker forces a bti with
--force-bti), the alignment of the section and hence the program
header of PT_GNU_PROPERTY type was not being set correctly. This
patch fixes this issue.
bfd/ChangeLog:
2019-06-06 Sudakshina Das <sudi.das@arm.com>
* elfxx-aarch64.c (_bfd_aarch64_elf_link_setup_gnu_properties): Set
alignment of the new gnu property section.
ld/ChangeLog:
2019-06-06 Sudakshina Das <sudi.das@arm.com>
* testsuite/ld-aarch64/aarch64-elf.exp: Add new tests.
* testsuite/ld-aarch64/property-bti-pac4-a.d: New test.
* testsuite/ld-aarch64/property-bti-pac4-b.d: New test.
* testsuite/ld-aarch64/property-bti-pac4.s: New test.
Too many platforms don't support it, and we can always safely use %lu or
%li anyway, because the only uses are in debugging output.
libctf/
* ctf-archive.c (ctf_arc_write): Eschew %zi format specifier.
(ctf_arc_open_by_offset): Likewise.
* ctf-create.c (ctf_add_type): Likewise.
Remove the use of 'I' within some comments in a recently added test.
gdb/testsuite/ChangeLog:
* gdb.arch/riscv-unwind-long-insn-6.s: Remove use of 'I' in
comment.
* gdb.arch/riscv-unwind-long-insn-8.s: Likewise.
If the RISC-V prologue scanner finds a 6 or 8 byte instruction we
currently throw an internal error, which is not great for the user.
A mechanism already exists in the prologue scanner to leave
instructions marked as unknown so that we can stop the prologue scan
without raising an error, this is used for all 2 and 4 byte
instructions that are not part of the small set the prologue scanner
actually understands.
This commit changes GDB so that all 6 and 8 byte instructions are
marked as unknown, rather than causing an error.
gdb/ChangeLog:
* riscv-tdep.c (riscv_insn::decode): Gracefully ignore
instructions of lengths 6 or 8 bytes.
gdb/testsuite/ChangeLog:
* gdb.arch/riscv-unwind-long-insn-6.s: New file.
* gdb.arch/riscv-unwind-long-insn-8.s: New file.
* gdb.arch/riscv-unwind-long-insn.c: New file.
* gdb.arch/riscv-unwind-long-insn.exp: New file.
Adds an utility function to make it shorter to write the common case
of wrapping an xstrdup with a unique_xmalloc_ptr, and uses it
throughout.
Note: I tried to put this in common/common-utils.h near skip_spaces,
etc. but that is included in common/common-defs.h before
common/gdb_unique_ptr.h is included, so it would fail to compile
because gdb::unique_xmalloc_ptr isn't defined at that point yet. I
tried moving the gdb_unique_ptr.h inclusion before common-utils.h, but
that doesn't work because gdb_unique_ptr.h depends on common-utils.h
for xfree.
gdb/ChangeLog:
2019-06-04 Pedro Alves <palves@redhat.com>
* common/gdb_unique_ptr.h (make_unique_xstrdup): New.
* ada-lang.c (catch_ada_completer): Use make_unique_xstrdup.
* breakpoint.c (condition_completer): Likewise.
* cli/cli-dump.c (scan_expression): Likewise.
* common/filestuff.c (mkdir_recursive): Likewise.
* common/gdb_tilde_expand.c (gdb_tilde_expand_up)
* common/pathstuff.c (gdb_realpath, gdb_realpath_keepfile)
(gdb_abspath): Likewise.
* compile/compile-cplus-types.c
(compile_cplus_instance::decl_name): Likewise.
* completer.c (complete_explicit_location):
(signal_completer, reg_or_group_completer_1): Likewise.
* cp-support.c (cp_remove_params_if_any): Likewise.
* fbsd-tdep.c (fbsd_core_vnode_path): Likewise.
* guile/scm-safe-call.c (gdbscm_safe_eval_string): Likewise.
* infcmd.c (strip_bg_char): Likewise.
* linespec.c (copy_token_string): Likewise.
* mi/mi-main.c (output_cores): Likewise.
* psymtab.c (psymtab_search_name):
* symfile.c (test_set_ext_lang_command): Likewise.
* target.c (target_fileio_read_stralloc): Likewise.
* tui/tui-regs.c (tui_reggroup_completer): Likewise.
* value.c (complete_internalvar): Likewise.
gdb/gdbserver/ChangeLog:
2019-06-04 Pedro Alves <palves@redhat.com>
* server.c (captured_main): Use make_unique_xstrdup.
On x86-64 Fedora 29, I tried to build a mingw-hosted gdb that targets
ppc-linux. You can do this with:
../binutils-gdb/configure --host=i686-w64-mingw32 --target=ppc-linux \
--disable-{binutils,gas,gold,gprof,ld}
The build failed with these errors in libctf:
In file included from ../../binutils-gdb/libctf/ctf-create.c:20:
../../binutils-gdb/libctf/ctf-create.c: In function 'ctf_add_encoded':
../../binutils-gdb/libctf/ctf-create.c:803:59: error: 'NBBY' undeclared (first use in this function)
dtd->dtd_data.ctt_size = clp2 (P2ROUNDUP (ep->cte_bits, NBBY) / NBBY);
^~~~
../../binutils-gdb/libctf/ctf-impl.h:254:42: note: in definition of macro 'P2ROUNDUP'
#define P2ROUNDUP(x, align) (-(-(x) & -(align)))
^~~~~
../../binutils-gdb/libctf/ctf-create.c:803:59: note: each undeclared identifier is reported only once for each function it appears in
dtd->dtd_data.ctt_size = clp2 (P2ROUNDUP (ep->cte_bits, NBBY) / NBBY);
^~~~
../../binutils-gdb/libctf/ctf-impl.h:254:42: note: in definition of macro 'P2ROUNDUP'
#define P2ROUNDUP(x, align) (-(-(x) & -(align)))
^~~~~
../../binutils-gdb/libctf/ctf-create.c: In function 'ctf_add_slice':
../../binutils-gdb/libctf/ctf-create.c:862:59: error: 'NBBY' undeclared (first use in this function)
dtd->dtd_data.ctt_size = clp2 (P2ROUNDUP (ep->cte_bits, NBBY) / NBBY);
^~~~
../../binutils-gdb/libctf/ctf-impl.h:254:42: note: in definition of macro 'P2ROUNDUP'
#define P2ROUNDUP(x, align) (-(-(x) & -(align)))
^~~~~
../../binutils-gdb/libctf/ctf-create.c: In function 'ctf_add_member_offset':
../../binutils-gdb/libctf/ctf-create.c:1341:21: error: 'NBBY' undeclared (first use in this function)
off += lsize * NBBY;
^~~~
../../binutils-gdb/libctf/ctf-create.c: In function 'ctf_add_type':
../../binutils-gdb/libctf/ctf-create.c:1822:16: warning: unknown conversion type character 'z' in format [-Wformat=]
ctf_dprintf ("Conflict for type %s against ID %lx: "
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../binutils-gdb/libctf/ctf-create.c:1823:35: note: format string is defined here
"union size differs, old %zi, new %zi\n",
^
../../binutils-gdb/libctf/ctf-create.c:1822:16: warning: unknown conversion type character 'z' in format [-Wformat=]
ctf_dprintf ("Conflict for type %s against ID %lx: "
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../binutils-gdb/libctf/ctf-create.c:1823:44: note: format string is defined here
"union size differs, old %zi, new %zi\n",
^
../../binutils-gdb/libctf/ctf-create.c:1822:16: warning: too many arguments for format [-Wformat-extra-args]
ctf_dprintf ("Conflict for type %s against ID %lx: "
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This patch fixes the actual errors in here. I did not try to fix the
printf warnings, though I think someone ought to.
Ok?
libctf/ChangeLog
2019-06-04 Tom Tromey <tromey@adacore.com>
* ctf-create.c (ctf_add_encoded, ctf_add_slice)
(ctf_add_member_offset): Use CHAR_BIT, not NBBY.
If VEX.vvvv and EVEX.vvvv are reserved, they must be all 1s, which are
all 0s in inverted form. Add check for unused VEX.vvvv and EVEX.vvvv
when disassembling VEX and EVEX instructions.
gas/
PR binutils/24626
* testsuite/gas/i386/disassem.s: Add tests for reserved VEX.vvvv
and EVEX.vvvv.
* testsuite/gas/i386/x86-64-disassem.s: Likewise.
* testsuite/gas/i386/disassem.d: Updated.
* testsuite/gas/i386/x86-64-disassem.d: Likewise.
opcodes/
PR binutils/24626
* i386-dis.c (print_insn): Check for unused VEX.vvvv and
EVEX.vvvv when disassembling VEX and EVEX instructions.
(OP_VEX): Set vex.register_specifier to 0 after readding
vex.register_specifier.
(OP_Vex_2src_1): Likewise.
(OP_Vex_2src_2): Likewise.
(OP_LWP_E): Likewise.
(OP_EX_Vex): Don't check vex.register_specifier.
(OP_XMM_Vex): Likewise.
(Not tested on any such platforms, since I don't have access to any at
the moment. Testing encouraged.)
libctf/
* configure.ac: Check for O_CLOEXEC.
* ctf-decls.h (O_CLOEXEC): Define (to 0), if need be.
* config.h.in: Regenerate.
We cannot just look for any declaration of qsort_r, because some
operating systems have a qsort_r that has a different prototype
but which still has a pair of pointers in the right places (the last two
args are interchanged): so use AC_LINK_IFELSE to check for both
known variants of qsort_r(), and swap their args into a consistent order
in a suitable inline function. (The code for this is taken almost
unchanged from gnulib.)
(Now we are not using AC_LIBOBJ any more, we can use a better name for
the qsort_r replacement as well.)
libctf/
* qsort_r.c: Rename to...
* ctf-qsort_r.c: ... this.
(_quicksort): Define to ctf_qsort_r.
* ctf-decls.h (qsort_r): Remove.
(ctf_qsort_r): Add.
(struct ctf_qsort_arg): New, transport the real ARG and COMPAR.
(ctf_qsort_compar_thunk): Rearrange the arguments to COMPAR.
* Makefile.am (libctf_a_LIBADD): Remove.
(libctf_a_SOURCES): New, add ctf-qsort_r.c.
* ctf-archive.c (ctf_arc_write): Call ctf_qsort_r, not qsort_r.
* ctf-create.c (ctf_update): Likewise.
* configure.ac: Check for BSD versus GNU qsort_r signature.
* Makefile.in: Regenerate.
* config.h.in: Likewise.
* configure: Likewise.
This stops the file format from depending on the size of the host int.
(It does mean that we cannot encode enums with a value > 2^32 on
platforms with an int > 2^32: this will be fixed in the next format
revision.)
include/
* ctf.h (ctf_enum.cte_value): Fix type to int32_t.
This allows users of the Python API to find the objfile where a type
was defined.
gdb/ChangeLog:
gdb/ChangeLog
2019-06-04 Christian Biesinger <cbiesinger@google.com>
Add objfile property to gdb.Type.
* gdb/NEWS: Mention Python API addition.
* gdb/python/py-type.c (typy_get_objfile): New method.
gdb/doc/ChangeLog
2019-06-04 Christian Biesinger <cbiesinger@google.com>
* gdb/doc/python.texi: Document new gdb.Type.objfile property.
gdb/testsuite/ChangeLog
2019-06-04 Christian Biesinger <cbiesinger@google.com>
* gdb/testsuite/gdb.python/py-type.exp: Test for new
gdb.Type.objfile property.
The "help" command can output long list of command names or classes.
Use the title style to style the command names or classes to make
the output more readable.
Similarly, change "apropos" command to also style the command names.
It is sometimes unclear why "apropos REGEXP" lists some commands,
and then the user has to manually do 'help command' for all commands
listed by "apropos" to see more details about the matching commands.
=> Add an optional flag -v so that "apropos -v REGEXP":
* outputs the full documentation of matching commands.
* highlights the documentation parts matching REGEXP.
Have 'show style' and its subcommands using a style to style its output.
This allows the GDB user or developer to use 'show style' to visually see
with one command how all the current styles look like.
Add 2 new styles highlight style, title style and fputs_highlighted function.
Highlight style is used by fputs_highlighted to highlight the parts of
its char *STR argument that match a HIGHLIGHT regexp.
This (and the title style) will be used in a following patch.
Revert:
binutls 2019-05-29 Nick Clifton <nickc@redhat.com>
* configure.ac (LIBCTF): Export. Set to empty for non-ELF based
targets.
(HAVE_LIBCTF): Define if libctf support is available.
* Makefile.am (LIBCTF): Set value to @LIBCTF@.
* objdump.c: Make CTF code conditional upon HAVE_LIBCTF being
defined.
* readelf.c: Likewise.
* configure: Regenerate.
* Makefile.in: Regenerate.
* config.in: Regenerate.
top 2019-05-29 Nick Clifton <nickc@redhat.com>
* configure.ac (noconfigdirs): Add libctf if the target does not use
the ELF file format.
* configure: Regenerate.
gdbreplay had its own implementation of fromhex. This patch changes
it to use the one in common/.
gdb/gdbserver/ChangeLog
2019-06-02 Tom Tromey <tom@tromey.com>
* gdbreplay.c (fromhex): Remove.
* Makefile.in (GDBREPLAY_OBS): Add rsp-low.o.
gdb/testsuite/ChangeLog
2019-05-31 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/shell.exp: Test pipe command, $_shell_exitcode,
$_shell_exitsignal.
* gdb.base/default.exp: Update for new convenience variables.
The pipe command allows to run a GDB command, and pipe its output
to a shell command:
(gdb) help pipe
Send the output of a gdb command to a shell command.
Usage: | [COMMAND] | SHELL_COMMAND
Usage: | -d DELIM COMMAND DELIM SHELL_COMMAND
Usage: pipe [COMMAND] | SHELL_COMMAND
Usage: pipe -d DELIM COMMAND DELIM SHELL_COMMAND
Executes COMMAND and sends its output to SHELL_COMMAND.
The -d option indicates to use the string DELIM to separate COMMAND
from SHELL_COMMAND, in alternative to |. This is useful in
case COMMAND contains a | character.
With no COMMAND, repeat the last executed command
and send its output to SHELL_COMMAND.
(gdb)
For example:
(gdb) pipe print some_data_structure | grep -B3 -A3 something
The pipe character is defined as an alias for pipe command, so that
the above can be typed as:
(gdb) | print some_data_structure | grep -B3 -A3 something
If no GDB COMMAND is given, then the previous command is relaunched,
and its output is sent to the given SHELL_COMMAND.
This also defines convenience vars $_shell_exitcode and $_shell_exitsignal
to record the exit code and exit signal of the last shell command
launched by GDB e.g. by "shell", "pipe", ...
gdb/ChangeLog
2019-05-31 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* cli/cli-cmds.c (pipe_command): New function.
(_initialize_cli_cmds): Call add_com for pipe_command.
Define | as an alias for pipe.
(exit_status_set_internal_vars): New function.
(shell_escape): Call exit_status_set_internal_vars.
cli/cli-decode.c (find_command_name_length): Recognize | as
a single character command.
2019-05-31 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdbcmd.h (execute_command_to_ui_file): New declaration.
top.c (execute_command_to_ui_file): New function, mostly a copy
of execute_command_to_string.
(execute_command_to_string): Implement by calling
execute_command_to_ui_file.
Currently, a previous command can be repeated when the user types an
empty line. This is implemented in handle_line_of_input by
returning saved_command_line in case an empty line has been input.
If we want a command to repeat the previous command, we need to save
the previous saved_command_line, as when a command runs, the saved_command_line
already contains the current command line of the command being executed.
As suggested by Tom, the previous_saved_command_line is made static.
At the same time, saved_command_line is also made static.
The support functions/variables for the repeat command logic are now all
located inside top.c.
gdb/ChangeLog
2019-05-31 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* top.h (saved_command_line): Remove declaration.
* top.c (previous_saved_command_line, previous_repeat_arguments):
New variables.
(saved_command_line): Make static, define together with other
'repeat variables'.
(dont_repeat): Clear repeat_arguments.
(repeat_previous, get_saved_command_line, save_command_line):
New functions.
(gdb_init): Initialize saved_command_line
and previous_saved_command_line.
* main.c (captured_main_1): Remove saved_command_line initialization.
* event-top.c (handle_line_of_input): Update to use
the new 'repeat' related functions instead of direct access to
saved_command_line.
* command.h (repeat_previous, get_saved_command_line,
save_command_line): New declarations.
(dont_repeat): Add comment.
- Use of nonportable <endian.h>
- Use of qsort_r
- Use of zlib without appropriate magic to pull in the binutils zlib
- Use of off64_t without checking (fixed by dropping the unused fields
that need off64_t entirely)
- signedness problems due to long being too short a type on 32-bit
platforms: ctf_id_t is now 'unsigned long', and CTF_ERR must be
used only for functions that return ctf_id_t
- One lingering use of bzero() and of <sys/errno.h>
All fixed, using code from gnulib where possible.
Relatedly, set cts_size in a couple of places it was missed
(string table and symbol table loading upon ctf_bfdopen()).
binutils/
* objdump.c (make_ctfsect): Drop cts_type, cts_flags, and
cts_offset.
* readelf.c (shdr_to_ctf_sect): Likewise.
include/
* ctf-api.h (ctf_sect_t): Drop cts_type, cts_flags, and cts_offset.
(ctf_id_t): This is now an unsigned type.
(CTF_ERR): Cast it to ctf_id_t. Note that it should only be used
for ctf_id_t-returning functions.
libctf/
* Makefile.am (ZLIB): New.
(ZLIBINC): Likewise.
(AM_CFLAGS): Use them.
(libctf_a_LIBADD): New, for LIBOBJS.
* configure.ac: Check for zlib, endian.h, and qsort_r.
* ctf-endian.h: New, providing htole64 and le64toh.
* swap.h: Code style fixes.
(bswap_identity_64): New.
* qsort_r.c: New, from gnulib (with one added #include).
* ctf-decls.h: New, providing a conditional qsort_r declaration,
and unconditional definitions of MIN and MAX.
* ctf-impl.h: Use it. Do not use <sys/errno.h>.
(ctf_set_errno): Now returns unsigned long.
* ctf-util.c (ctf_set_errno): Adjust here too.
* ctf-archive.c: Use ctf-endian.h.
(ctf_arc_open_by_offset): Use memset, not bzero. Drop cts_type,
cts_flags and cts_offset.
(ctf_arc_write): Drop debugging dependent on the size of off_t.
* ctf-create.c: Provide a definition of roundup if not defined.
(ctf_create): Drop cts_type, cts_flags and cts_offset.
(ctf_add_reftype): Do not check if type IDs are below zero.
(ctf_add_slice): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_member_offset): Cast error-returning ssize_t's to size_t
when known error-free. Drop CTF_ERR usage for functions returning
int.
(ctf_add_member_encoded): Drop CTF_ERR usage for functions returning
int.
(ctf_add_variable): Likewise.
(enumcmp): Likewise.
(enumadd): Likewise.
(membcmp): Likewise.
(ctf_add_type): Likewise. Cast error-returning ssize_t's to size_t
when known error-free.
* ctf-dump.c (ctf_is_slice): Drop CTF_ERR usage for functions
returning int: use CTF_ERR for functions returning ctf_type_id.
(ctf_dump_label): Likewise.
(ctf_dump_objts): Likewise.
* ctf-labels.c (ctf_label_topmost): Likewise.
(ctf_label_iter): Likewise.
(ctf_label_info): Likewise.
* ctf-lookup.c (ctf_func_args): Likewise.
* ctf-open.c (upgrade_types): Cast to size_t where appropriate.
(ctf_bufopen): Likewise. Use zlib types as needed.
* ctf-types.c (ctf_member_iter): Drop CTF_ERR usage for functions
returning int.
(ctf_enum_iter): Likewise.
(ctf_type_size): Likewise.
(ctf_type_align): Likewise. Cast to size_t where appropriate.
(ctf_type_kind_unsliced): Likewise.
(ctf_type_kind): Likewise.
(ctf_type_encoding): Likewise.
(ctf_member_info): Likewise.
(ctf_array_info): Likewise.
(ctf_enum_value): Likewise.
(ctf_type_rvisit): Likewise.
* ctf-open-bfd.c (ctf_bfdopen): Drop cts_type, cts_flags and
cts_offset.
(ctf_simple_open): Likewise.
(ctf_bfdopen_ctfsect): Likewise. Set cts_size properly.
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.h: Likewise.
* configure: Likewise.
This fixes a bug reported on the riscv.org sw-dev mailing list. This
rejects "lui x1,symbol", as a symbol should only be accepted here when
used inside %hi(). Without the fix, this gets assembled as "lui x1,0"
with no relocation which is clearly wrong.
gas/
* config/tc-riscv.c (riscv_ip) <'u'>: Move O_constant check inside if
statement. Delete O_symbol and O_constant check after if statement.
* testsuite/gas/riscv/auipc-parsing.s: Test lui with missing %hi.
* testsuite/gas/riscv/auipc-parsing.l: Update.
This fixes a couple of comments in gdbtypes.h. One comment had a
typo; and another comment referred to "Moto", which is presumably some
long-gone Motorola-related project.
Tested by rebuilding.
gdb/ChangeLog
2019-05-30 Tom Tromey <tromey@adacore.com>
* gdbtypes.h (struct range_bounds) <flag_upper_bound_is_count>:
Fix comment.
(TYPE_ARRAY_UPPER_BOUND_IS_UNDEFINED): Rewrite comment.
The complete function should set parameter word to the end of the
word to complete. However, completion_find_completion_word may fail,
leaving word uninitialized.
To make sure word is always set, initialize it to the completion point
which is the end of the line parameter.
gdb/Changelog
PR cli/24587
* completer.c (complete): Initialize variable word.
Ref.: https://bugzilla.redhat.com/show_bug.cgi?id=1715008
On commit 7bede82892a06e6c26989803e70f53697392dcf9 ("Don't crash if
dwarf_decode_macro_bytes's 'body' is NULL"), I was too strict when
checking if 'body' is NULL: the check only comprised the case when
'is_define' is true. However, the corruption of .debug_macro by
rpmbuild's "debugedit" also affects the case when 'is_define' is
false, i.e., when the macro is being undefined.
This commit improves the check and covers both cases now. This has
been tested on Fedora 30 with a problematic debuginfo, and I don't see
a segfault anymore.
OK to push?
gdb/ChangeLog:
2019-05-29 Sergio Durigan Junior <sergiodj@redhat.com>
Ref.: https://bugzilla.redhat.com/show_bug.cgi?id=1708192
Ref.: https://bugzilla.redhat.com/show_bug.cgi?id=1715008
* dwarf2read.c (dwarf_decode_macro_bytes): Move check to see if
'body' is NULL to the outter 'if', protecting the '!is_define'
situation as well.
I noticed a failure in gdb.ada/complete.exp when testing locally:
FAIL: gdb.ada/complete.exp: complete break ada
This failed due to this output:
[...]
break ada/generated/gnatvsn.ads
break ada/libgnat/s-excmac.ads
break ada/sdefault.adb
break ada/snames.adb
break ada/snames.ads
This patch updates the regexp to allow "/" and "-" to appear.
gdb/testsuite/ChangeLog
2019-05-29 Tom Tromey <tromey@adacore.com>
* gdb.ada/complete.exp (test_gdb_no_completion): Add "/" and "-"
to "break complete ada" test case's regexp.
