2013-02-09 Jürgen Urban <JuergenUrban@gmx.de>
* config/tc-mips.c (CPU_HAS_LDC1_SDC1): New macro.
(macro): Use it. Assert that trunc.w.s is not used for r5900.
opcodes/
2013-02-09 Jürgen Urban <JuergenUrban@gmx.de>
* mips-opc.c (mips_builtin_opcodes): Enable l.d and s.d macros for
single-float. Disable ll, lld, sc and scd for EE. Disable the
trunc.w.s macro for EE.
gas/testsuite/
2013-02-09 Jürgen Urban <JuergenUrban@gmx.de>
* gas/mips/24k-triple-stores-2.d, gas/mips/24k-triple-stores-2.s,
gas/mips/micromips@24k-triple-stores-2.d: Move "sc" tests to...
* gas/mips/24k-triple-stores-2-llsc.d,
gas/mips/24k-triple-stores-2-llsc.s,
gas/mips/micromips@24k-triple-stores-2-llsc.d: ...these new tests.
* gas/mips/r5900-full.d, gas/mips/r5900-full.s: Verify that the
MIPS ISA level can be upgraded to support ll, sc, lld and scd.
* gas/mips/l_d-single.d, gas/mips/s_d-single.d,
gas/mips/r5900-nollsc.l, gas/mips/r5900-nollsc.s: New tests.
* gas/mips/mips.exp: Update accordingly. Add "nollsc" to r5900
properties.
2013-01-17 Yufeng Zhang <yufeng.zhang@arm.com>
* aarch64.h (aarch64_op): Remove OP_V_MOVI_B.
opcodes/
2013-01-17 Yufeng Zhang <yufeng.zhang@arm.com>
* aarch64-asm.c (aarch64_ins_advsimd_imm_modified): Handle 8-bit MOVI.
* aarch64-dis.c (aarch64_ext_advsimd_imm_modified): Likewise.
* aarch64-opc.c (operand_general_constraint_met_p): For
AARCH64_MOD_LSL, move the range check on the shift amount before the
alignment check; change to call set_sft_amount_out_of_range_error
instead of set_imm_out_of_range_error.
* aarch64-tbl.h (QL_SIMD_IMM_B): Replace NIL with LSL.
(aarch64_opcode_table): Remove the OP enumerator from the asimdimm
8-bit MOVI entry; change the 2nd operand from SIMD_IMM to
SIMD_IMM_SFT.
gas/
2013-01-17 Yufeng Zhang <yufeng.zhang@arm.com>
* config/tc-aarch64.c (output_operand_error_record): Change to output
the out-of-range error message as value-expected message if there is
only one single value in the expected range.
(programmer_friendly_fixup): Remove the handling of 8-bit MOVI with
LSL #0 as a programmer-friendly feature.
gas/testsuite/
2013-01-17 Yufeng Zhang <yufeng.zhang@arm.com>
* gas/aarch64/diagnostic.l: Update.
* gas/aarch64/movi.s: Add tests.
* gas/aarch64/movi.d: Update.
* gas/aarch64/programmer-friendly.s: Add comment.
* metag.h: New file.
* dis-asm.h (print_insn_metag): New declaration.
* metag.h: New file.
* Makefile.am: Add Meta.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.in: Add Meta.
* disassemble.c: Add Meta support.
* metag-dis.c: New file.
* Makefile.am: Add Meta.
* Makefile.in: Regenerate.
* archures.c (bfd_mach_metag): New.
* bfd-in2.h: Regenerate.
* config.bfd: Add Meta.
* configure: Regenerate.
* configure.in: Add Meta.
* cpu-metag.c: New file.
* elf-bfd.h: Add Meta.
* elf32-metag.c: New file.
* elf32-metag.h: New file.
* libbfd.h: Regenerate.
* reloc.c: Add Meta relocations.
* targets.c: Add Meta.
* Makefile.am: Add Meta.
* Makefile.in: Regenerate.
* config/tc-metag.c: New file.
* config/tc-metag.h: New file.
* configure.tgt: Add Meta.
* doc/Makefile.am: Add Meta.
* doc/Makefile.in: Regenerate.
* doc/all.texi: Add Meta.
* doc/as.texiinfo: Document Meta options.
* doc/c-metag.texi: New file.
* gas/metag/labelarithmetic.d: New file.
* gas/metag/labelarithmetic.s: New file.
* gas/metag/metacore12.d: New file.
* gas/metag/metacore12.s: New file.
* gas/metag/metacore21-invalid.l: New file.
* gas/metag/metacore21-invalid.s: New file.
* gas/metag/metacore21.d: New file.
* gas/metag/metacore21.s: New file.
* gas/metag/metacore21ext.d: New file.
* gas/metag/metacore21ext.s: New file.
* gas/metag/metadsp21-invalid.l: New file.
* gas/metag/metadsp21-invalid.s: New file.
* gas/metag/metadsp21.d: New file.
* gas/metag/metadsp21.s: New file.
* gas/metag/metadsp21ext.d: New file.
* gas/metag/metadsp21ext.s: New file.
* gas/metag/metafpu21.d: New file.
* gas/metag/metafpu21.s: New file.
* gas/metag/metafpu21ext.d: New file.
* gas/metag/metafpu21ext.s: New file.
* gas/metag/metag.exp: New file.
* gas/metag/tls.d: New file.
* gas/metag/tls.s: New file.
* Makefile.am: Add Meta.
* Makefile.in: Regenerate.
* configure.tgt: Add Meta.
* emulparams/elf32metag.sh: New file.
* emultempl/metagelf.em: New file.
* ld-elf/merge.d: Mark Meta as xfail.
* ld-gc/start.d: Skip this test on Meta.
* ld-gc/personality.d: Skip this test on Meta.
* ld-metag/external.s: New file.
* ld-metag/metag.exp: New file.
* ld-metag/pcrel.d: New file.
* ld-metag/pcrel.s: New file.
* ld-metag/shared.d: New file.
* ld-metag/shared.r: New file.
* ld-metag/shared.s: New file.
* ld-metag/stub.d: New file.
* ld-metag/stub.s: New file.
* ld-metag/stub_pic_app.d: New file.
* ld-metag/stub_pic_app.r: New file.
* ld-metag/stub_pic_app.s: New file.
* ld-metag/stub_pic_shared.d: New file.
* ld-metag/stub_pic_shared.s: New file.
* ld-metag/stub_shared.d: New file.
* ld-metag/stub_shared.r: New file.
* ld-metag/stub_shared.s: New file.
* binutils/readelf.c: (guess_is_rela): Add EM_METAG.
(dump_relocations): Add EM_METAG.
(get_machine_name): Correct case for Meta.
(is_32bit_abs_reloc): Add support for Meta ADDR32 reloc.
(is_none_reloc): Add support for Meta NONE reloc.
* bfd-in2.h: Add support for MIPS r5900
* config.bfd: Add support for Sony Playstation 2
* cpu-mips.c: Add support for MIPS r5900
* elfxx-mips.c: Add support for MIPS r5900 (extension of r4000)
* config/tc-mips.c: Add support for MIPS r5900
Add M_LQ_AB and M_SQ_AB to support large values for instructions lq and sq.
* config/tc-mips.c (can_swap_branch_p, get_append_method): Detect some conditional short loops to fix a bug on the r5900 by NOP in the branch delay slot.
* config/tc-mips.c (M_MUL): Support 3 operands in multu on r5900.
* config/tc-mips.c (M_TRUNCWS): Support trunc.w.s on r5900 in MIPS ISA I.
* config/tc-mips.c (s_mipsset): Force 32 bit floating point on r5900.
* configure.in: Detect CPU type when target string contains r5900 (e.g. mips64r5900el-linux-gnu).
* config/tc-mips.c (mips_ip): Check parameter range of instructions mfps and mtps on r5900.
* elf/mips.h: Add MIPS machine variant number for r5900 which is compatible with old Playstation 2 software.
* opcode/mips.h: Add support for r5900 instructions including lq and sq.
* configure.tgt: Support ELF files for Sony Playstation 2 (for ps2dev and ps2sdk).
* emulparams/elf32lr5900n32.sh: Create linker script for Sony Playstation 2 ELF files using MIPS ABI n32.
* emulparams/elf32lr5900.sh: Create linker script for Sony Playstation 2 ELF files using MIPS ABI o32.
* Makefile.am: Add linker scripts for Sony Playstation 2 ELF files.
* opcodes/mips-dis.c: Add names for CP0 registers of r5900.
* opcodes/mips-opc.c: Add M_SQ_AB and M_LQ_AB to support larger range for instructions sq and lq.
* opcodes/mips-opc.c: Add support for MIPS r5900 CPU.
Add support for 128 bit MMI (Multimedia Instructions).
Add support for EE instructions (Emotion Engine).
Disable unsupported floating point instructions (64 bit and undefined compare operations).
Enable instructions of MIPS ISA IV which are supported by r5900.
Disable 64 bit co processor instructions.
Disable 64 bit multiplication and division instructions.
Disable instructions for co-processor 2 and 3, because these are not supported (preparation for later VU0 support (Vector Unit)).
Disable cvt.w.s because this behaves like trunc.w.s and the correct execution can't be ensured on r5900.
Add trunc.w.s using the opcode encoding of cvt.w.s on r5900. This will confuse less developers and compilers.
binutils/
2013-01-02 H.J. Lu <hongjiu.lu@intel.com>
* version.c (print_version): Update copyright year to 2013.
gas/
2013-01-02 H.J. Lu <hongjiu.lu@intel.com>
* as.c (parse_args): Update copyright year to 2013.
ld/
2013-01-02 H.J. Lu <hongjiu.lu@intel.com>
* ldver.c (ldversion): Update copyright year to 2013.
opcodes/
2013-01-02 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (process_copyright): Update copyright year to 2013.
* gas/i386/rex.s: Add test of REX prefix before fsave (i.e. fwait).
* gas/i386/rex.d: Update.
opcodes/
* i386-dis.c (ckprefix): When bailing out for fwait with prefixes,
set rex_used to rex.
value with a default.
(do_special_encoding): Likewise.
(aarch64_ins_ldst_elemlist): Pre-initialize QSsize, and opcodeh2
variables with default.
* arc-dis.c (write_comments_): Don't use strncat due
size of state->commentBuffer pointer isn't predictable.
opcodes/
* aarch64-opc.c (operand_general_constraint_met_p): Change to check
the alignment of addr.offset.imm instead of that of shifter.amount for
operand type AARCH64_OPND_ADDR_UIMM12.
gas/testsuite/
* gas/aarch64/illegal-2.s: Add test case.
* gas/aarch64/illegal-2.l: Likewise.
* arm-dis.c: Use preferred form of vrint instruction variants
for disassembly.
2012-10-11 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
* gas/arm/armv8-a+fp.d: Use preferred form of vrint instruction
variants for disassembly.
* gas/arm/armv8-a+fp.s: Likewise.
* gas/arm/armv8-a+simd.d: Likewise.
* gas/arm/armv8-a+simd.s: Likewise.
register operand of clr1, not1, set1 and tst1 instructions.
* config/tc-v850.c (v850_insert_operand): Use a static buffer for
the error message.
* gas/v850/v850e1.d: Fix expected disassembly of clr1, not1, set1
and tst1 insns.
