and other tidies. I think it's better to default to passing the
section to bfd_octets_per_byte, even in cases where we know it won't
make a difference.
A number of the coff reloc functions used bfd_octets_per_byte wrongly,
not factoring it into the offset into the data buffer. As it happens,
the targets using those files always had bfd_octets_per_byte equal to
one, so there wasn't any detectable wrong behaviour. However, it is
wrong in the source and might cause trouble for anyone creating a new
target. Besides fixing that, the patch also defines OCTETS_PER_BYTE
as one in target files where that is appropriate.
bfd/
* archures.c (bfd_octets_per_byte): Tail call
bfd_arch_mach_octets_per_byte.
* coff-arm.c (OCTETS_PER_BYTE): Define.
(coff_arm_reloc): Introduce new "octets" temp. Use OCTETS_PER_BYTE
with section. Correct "addr". Remove ATTRIBUTE_UNUSED.
* coff-i386.c (coff_i386_reloc): Similarly.
* coff-mips.c (mips_reflo_reloc): Similarly.
* coff-x86_64.c (coff_amd64_reloc): Similarly.
* elf32-msp430.c (OCTETS_PER_BYTE): Define.
(rl78_sym_diff_handler): Use OCTETS_PER_BYTE, with section.
* elf32-nds32.c (nds32_elf_get_relocated_section_contents): Similarly.
* elf32-ppc.c (ppc_elf_addr16_ha_reloc): Similarly.
* elf32-pru.c (pru_elf32_do_ldi32_relocate): Similarly.
* elf32-s12z.c (opru18_reloc): Similarly.
* elf32-sh.c (sh_elf_reloc): Similarly.
* elf32-spu.c (spu_elf_rel9): Similarly.
* elf32-xtensa.c (bfd_elf_xtensa_reloc): Similarly.
* elf64-ppc.c (ppc64_elf_ha_reloc, ppc64_elf_brtaken_reloc),
(ppc64_elf_toc64_reloc): Similarly.
* bfd.c (bfd_get_section_limit): Pass section to bfd_octets_per_byte.
* cofflink.c (_bfd_coff_link_input_bfd),
(_bfd_coff_reloc_link_order): Likewise.
* elf.c (_bfd_elf_section_offset): Likewise.
* elflink.c (resolve_section, bfd_elf_perform_complex_relocation),
(elf_link_input_bfd, elf_reloc_link_order, elf_fixup_link_order),
(bfd_elf_final_link): Likewise.
* elf.c (_bfd_elf_make_section_from_shdr): Don't strncmp twice
to set SEC_ELF_OCTETS.
* reloc.c (bfd_perform_relocation): Tidy SEC_ELF_OCTETS special case.
(bfd_install_relocation): Likewise.
(_bfd_final_link_relocate): Don't recalculate octets.
* syms.c (_bfd_stab_section_find_nearest_line): Introduc new
"octets" temp.
* bfd-in2.h: Regenerate.
ld/
* ldexp.c (fold_name): Pass section to bfd_octets_per_byte.
* ldlang.c (init_opb): Don't call bfd_arch_mach_octets_per_byte
unnecessarily.
All symbols, sizes and relocations in this section are octets instead of
bytes. Required for DWARF debug sections as DWARF information is
organized in octets, not bytes.
bfd/
* section.c (struct bfd_section): New flag SEC_ELF_OCTETS.
* archures.c (bfd_octets_per_byte): New parameter sec.
If section is not NULL and SEC_ELF_OCTETS is set, one octet es
returned [ELF targets only].
* bfd.c (bfd_get_section_limit): Provide section parameter to
bfd_octets_per_byte.
* bfd-in2.h: regenerate.
* binary.c (binary_set_section_contents): Move call to
bfd_octets_per_byte into section loop. Provide section parameter
to bfd_octets_per_byte.
* coff-arm.c (coff_arm_reloc): Provide section parameter
to bfd_octets_per_byte.
* coff-i386.c (coff_i386_reloc): likewise.
* coff-mips.c (mips_reflo_reloc): likewise.
* coff-x86_64.c (coff_amd64_reloc): likewise.
* cofflink.c (_bfd_coff_link_input_bfd): likewise.
(_bfd_coff_reloc_link_order): likewise.
* elf.c (_bfd_elf_section_offset): likewise.
(_bfd_elf_make_section_from_shdr): likewise.
Set SEC_ELF_OCTETS for sections with names .gnu.build.attributes,
.debug*, .zdebug* and .note.gnu*.
* elf32-msp430.c (rl78_sym_diff_handler): Provide section parameter
to bfd_octets_per_byte.
* elf32-nds.c (nds32_elf_get_relocated_section_contents): likewise.
* elf32-ppc.c (ppc_elf_addr16_ha_reloc): likewise.
* elf32-pru.c (pru_elf32_do_ldi32_relocate): likewise.
* elf32-s12z.c (opru18_reloc): likewise.
* elf32-sh.c (sh_elf_reloc): likewise.
* elf32-spu.c (spu_elf_rel9): likewise.
* elf32-xtensa.c (bfd_elf_xtensa_reloc): likewise
* elf64-ppc.c (ppc64_elf_brtaken_reloc): likewise.
(ppc64_elf_addr16_ha_reloc): likewise.
(ppc64_elf_toc64_reloc): likewise.
* elflink.c (bfd_elf_final_link): likewise.
(bfd_elf_perform_complex_relocation): likewise.
(elf_fixup_link_order): likewise.
(elf_link_input_bfd): likewise.
(elf_link_sort_relocs): likewise.
(elf_reloc_link_order): likewise.
(resolve_section): likewise.
* linker.c (_bfd_generic_reloc_link_order): likewise.
(bfd_generic_define_common_symbol): likewise.
(default_data_link_order): likewise.
(default_indirect_link_order): likewise.
* srec.c (srec_set_section_contents): likewise.
(srec_write_section): likewise.
* syms.c (_bfd_stab_section_find_nearest_line): likewise.
* reloc.c (_bfd_final_link_relocate): likewise.
(bfd_generic_get_relocated_section_contents): likewise.
(bfd_install_relocation): likewise.
For section which have SEC_ELF_OCTETS set, multiply output_base
and output_offset with bfd_octets_per_byte.
(bfd_perform_relocation): likewise.
include/
* coff/ti.h (GET_SCNHDR_SIZE, PUT_SCNHDR_SIZE, GET_SCN_SCNLEN),
(PUT_SCN_SCNLEN): Adjust bfd_octets_per_byte calls.
binutils/
* objdump.c (disassemble_data): Provide section parameter to
bfd_octets_per_byte.
(dump_section): likewise
(dump_section_header): likewise. Show SEC_ELF_OCTETS flag if set.
gas/
* as.h: Define SEC_OCTETS as SEC_ELF_OCTETS if OBJ_ELF.
* dwarf2dbg.c: (dwarf2_finish): Set section flag SEC_OCTETS for
.debug_line, .debug_info, .debug_abbrev, .debug_aranges, .debug_str
and .debug_ranges sections.
* write.c (maybe_generate_build_notes): Set section flag
SEC_OCTETS for .gnu.build.attributes section.
* frags.c (frag_now_fix): Don't divide by OCTETS_PER_BYTE if
SEC_OCTETS is set.
* symbols.c (resolve_symbol_value): Likewise.
ld/
* ldexp.c (fold_name): Provide section parameter to
bfd_octets_per_byte.
* ldlang (init_opb): New argument s. Set opb_shift to 0 if
SEC_ELF_OCTETS for the current section is set.
(print_input_section): Pass current section to init_opb.
(print_data_statement,print_reloc_statement,
print_padding_statement): Likewise.
(lang_check_section_addresses): Call init_opb for each
section.
(lang_size_sections_1,lang_size_sections_1,
lang_do_assignments_1): Likewise.
(lang_process): Pass NULL to init_opb.
This patch introduces a new "sorry, cannot handle this file" bfd error
status. The idea is to use this error in cases where bfd hasn't found
a bfd_bad_value error, ie. an input file or set of options that are
invalid, but rather an input file that is simply too difficult to
process. Typically this might happen with fuzzed object files such as
the one in the PR, a wildly improbable core file. Some things are
just not worth wasting time over to fix "properly".
PR 25196
* bfd.c (bfd_error_type): Add bfd_error_sorry.
(bfd_errmsgs): Likewise.
* elf.c (rewrite_elf_program_header): Don't abort on confused
lma/alignment. Replace bfd_error_bad_value with bfd_error_sorry.
(_bfd_elf_validate_reloc): Use bfd_error_sorry.
(_bfd_elf_final_write_processing): Likewise.
* bfd-in2.h: Regenerate.
I think it is past time to remove CR16C support. CR16C was added in
2004, and only for ld. gas and binutils support is lacking, and there
have been no commits to bfd/elf32-cr16c.c other than warning fixes or
global maintainers making changes to all targets. I see no maintainer
listed for CR16C, and no commits from anyone at NSC supporting the
target. Furthermore, at the time the CR16 support was added in 2007,
config.sub was changed upstream to no longer recognise cr16c as a
valid cpu. That means the CR16C ld support is only available as a
secondary target by configuring with, for example,
--enable-targets=all or --enable-targets=cr16c-unknown-elf. No
testing of the CR16C target is possible.
include/
* elf/cr16c.h: Delete.
bfd/
* cpu-cr16c.c: Delete.
* elf32-cr16c.c: Delete.
* Makefile.am,
* archures.c,
* config.bfd,
* configure.ac,
* reloc.c,
* targets.c: Remove cr16c support.
* Makefile.in,
* bfd-in2.h,
* configure,
* libbfd.h,
* po/SRC-POTFILES.in: Regenerate.
ld/
* emulparams/elf32cr16c.sh: Delete.
* scripttempl/elf32cr16c.sc: Delete.
* Makefile.am,
* configure.tgt: Remove cr16c support.
* NEWS: Mention removal of cr16c.
* Makefile.in,
* po/BLD-POTFILES.in: Regenerate.
This patch extends "ar P" to allow creation of normal (as distinct
from thin) archives with full path names.
PR 452
PR 25104
bfd/
* archive.c (normalize): Return file unchanged when
BFD_ARCHIVE_FULL_PATH.
(_bfd_construct_extended_name_table): Pass abfd, the output
bfd, to normalize.
(_bfd_archive_bsd44_construct_extended_name_table): Likewise.
* bfd.c (struct bfd): Make flags a full flagword.
(BFD_ARCHIVE_FULL_PATH): Define.
* bfd-in2.h: Regenerate.
binutils/
* ar.c (write_archive): Set BFD_ARCHIVE_FULL_PATH.
* doc/binutils.texi (extract from archive): Mention
restrictions when extracting from archives with full paths.
(ar P): Update to current P support.
(ar -X32_64): Fix spelling.
bfd/
* bfd-in.h: Move arm declaraions..
* cpu-arm.h: ..to here, new file..
* coff-arm.h: ..and here, new file..
* elf32-arm.h: ..and here, new file.
* cpu-arm.c: Include cpu-arm.h.
* coff-arm.c: Include cpu-arm.h and coff-arm.h.
* elf32-arm.c: Include cpu-arm.h and elf32-arm.h.
* pe-arm.c: Move function rename defines later.
* pe-arm-wince.c: Likewise and include sysdep.h and bfd.h early.
* bfd-in2.h: Regenerate.
gas/
* config/tc-arm.c: Include cpu-arm.h.
ld/
* emultempl/armelf.em: Include elf32-arm.h.
* emultempl/pe.em: Move func defines later and include coff-arm.h.
This one exposed a bug in tic6x gas, found with inline function
parameter type checking. struct bfd_section and struct bfd_symbol
both have a flags field, so bfd_is_com_section (symbol) compiled OK
when bfd_is_com_section was a macro but didn't special case common
symbols.
bfd/
* bfd-in.h (bfd_section_name, bfd_section_size, bfd_section_vma),
(bfd_section_lma, bfd_section_alignment, bfd_section_flags),
(bfd_section_userdata, bfd_is_com_section, discarded_section),
(bfd_get_section_limit_octets, bfd_get_section_limit): Delete macros.
* bfd.c (bfd_get_section_limit_octets, bfd_get_section_limit),
(bfd_section_list_remove, bfd_section_list_append),
(bfd_section_list_prepend, bfd_section_list_insert_after),
(bfd_section_list_insert_before, bfd_section_removed_from_list):
New inline functions.
* section.c (bfd_is_und_section, bfd_is_abs_section),
(bfd_is_ind_section, bfd_is_const_section, bfd_section_list_remove),
(bfd_section_list_append, bfd_section_list_prepend),
(bfd_section_list_insert_after, bfd_section_list_insert_before),
(bfd_section_removed_from_list): Delete macros.
(bfd_section_name, bfd_section_size, bfd_section_vma),
(bfd_section_lma, bfd_section_alignment, bfd_section_flags),
(bfd_section_userdata, bfd_is_com_section, bfd_is_und_section),
(bfd_is_abs_section, bfd_is_ind_section, bfd_is_const_section),
(discarded_section): New inline functions.
* bfd-in2.h: Regenerate.
gas/
* config/tc-tic6x.c (tc_gen_reloc): Correct common symbol check.
ld/
* emultempl/xtensaelf.em (xtensa_get_section_deps): Comment.
Use bfd_section_userdata.
(xtensa_set_section_deps): Use bfd_set_section_userdata.
* ldlang.c (lang_output_section_get): Use bfd_section_userdata.
(sort_def_symbol): Likewise, and bfd_set_section_userdata.
(init_os): Use bfd_set_section_userdata.
(print_all_symbols): Use bfd_section_userdata.
* ldlang.h (get_userdata): Delete.
This introduces a new bfd_set_filename function, which is then used in
various spots in gdb. This allows for the removal of some casts.
bfd/ChangeLog
2019-09-11 Tom Tromey <tom@tromey.com>
* opncls.c (bfd_set_filename): New function.
* bfd-in2.h: Regenerate.
gdb/ChangeLog
2019-09-11 Tom Tromey <tom@tromey.com>
* symfile-mem.c (symbol_file_add_from_memory): Use
bfd_set_filename.
* solib-darwin.c (darwin_bfd_open): Use bfd_set_filename.
* solib-aix.c (solib_aix_bfd_open): Use bfd_set_filename.
BFD was leaking memory in bfd_check_format_matches. As part of
deciding the proper format of an archive, BFD looks at the format of
the first file stored. That file's bfd was left open for reasons
given in a comment removed in git commit 0e71e4955c that said:
/* We ought to close `first' here, but we can't, because
we have no way to remove it from the archive cache.
It's close to impossible to figure out when we can
release bfd_ardata. FIXME. */
Well, things have changed since that comment was true and we now can
remove files from the archive cache. Closing the first file is good
and cures some of the leaks. Other leaks are caused by
bfd_check_format_matches throwing away bfd tdata before trying a new
match. That lost the element cache set up when format checking the
first element in the archive. The easiest and cleanest fix is to
simply disable the caching when checking the first element.
PR 24891
* bfd.c (struct bfd): Add no_element_cache.
* archive.c (_bfd_get_elt_at_filepos): Don't add element to
archive cache when no_element_cache.
(bfd_generic_archive_p): Set no_element_cache when opening first
element to check format. Close first element too.
(do_slurp_bsd_armap): Don't zero ardata->cache here.
* bfd-in2.h: Regenerate.
This patch supports using pcrel instructions in TLS code sequences. A
number of new relocations are needed, gas operand modifiers to
generate those relocations, and new TLS optimisation. For
optimisation it turns out that the new pcrel GD and LD sequences can
be distinguished from the non-pcrel GD and LD sequences by there being
different relocations on the new sequence. The final "add ra,rb,13"
on IE sequences similarly needs a new relocation, or as I chose, a
modification of R_PPC64_TLS. On pcrel IE code, the R_PPC64_TLS points
one byte into the "add" instruction rather than being on the
instruction boundary.
GD:
pla 3,z@got@tlsgd@pcrel # R_PPC64_GOT_TLSGD34
bl __tls_get_addr@notoc(z@tlsgd) # R_PPC64_TLSGD and R_PPC64_REL24_NOTOC
edited to IE
pld 3,z@got@tprel@pcrel
add 3,3,13
edited to LE
paddi 3,13,z@tprel
nop
LD:
pla 3,z@got@tlsld@pcrel # R_PPC64_GOT_TLSLD34
bl __tls_get_addr@notoc(z@tlsld) # R_PPC64_TLSLD and R_PPC64_REL24_NOTOC
..
paddi 9,3,z2@dtprel
pld 10,z3@got@dtprel@pcrel
add 10,10,3
edited to LE
paddi 3,13,0x1000
nop
IE:
pld 9,z@got@tprel@pcrel # R_PPC64_GOT_TPREL34
add 3,9,z@tls@pcrel # R_PPC64_TLS at insn+1
ldx 4,9,z@tls@pcrel
lwax 5,9,z@tls@pcrel
stdx 5,9,z@tls@pcrel
edited to LE
paddi 9,13,z@tprel
nop
ld 4,0(9)
lwa 5,0(9)
std 5,0(9)
LE:
paddi 10,13,z@tprel
include/
* elf/ppc64.h (R_PPC64_TPREL34, R_PPC64_DTPREL34),
(R_PPC64_GOT_TLSGD34, R_PPC64_GOT_TLSLD34),
(R_PPC64_GOT_TPREL34, R_PPC64_GOT_DTPREL34): Define.
(IS_PPC64_TLS_RELOC): Include new tls relocs.
bfd/
* reloc.c (BFD_RELOC_PPC64_TPREL34, BFD_RELOC_PPC64_DTPREL34),
(BFD_RELOC_PPC64_GOT_TLSGD34, BFD_RELOC_PPC64_GOT_TLSLD34),
(BFD_RELOC_PPC64_GOT_TPREL34, BFD_RELOC_PPC64_GOT_DTPREL34),
(BFD_RELOC_PPC64_TLS_PCREL): New pcrel tls relocs.
* elf64-ppc.c (ppc64_elf_howto_raw): Add howtos for pcrel tls relocs.
(ppc64_elf_reloc_type_lookup): Translate pcrel tls relocs.
(must_be_dyn_reloc, dec_dynrel_count): Add R_PPC64_TPREL64.
(ppc64_elf_check_relocs): Support pcrel tls relocs.
(ppc64_elf_tls_optimize, ppc64_elf_relocate_section): Likewise.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
gas/
* config/tc-ppc.c (ppc_elf_suffix): Map "tls@pcrel", "got@tlsgd@pcrel",
"got@tlsld@pcrel", "got@tprel@pcrel", and "got@dtprel@pcrel".
(fixup_size, md_assemble): Handle pcrel tls relocs.
(ppc_force_relocation, ppc_fix_adjustable): Likewise.
(md_apply_fix, tc_gen_reloc): Likewise.
ld/
* testsuite/ld-powerpc/tlsgd.d,
* testsuite/ld-powerpc/tlsgd.s,
* testsuite/ld-powerpc/tlsie.d,
* testsuite/ld-powerpc/tlsie.s,
* testsuite/ld-powerpc/tlsld.d,
* testsuite/ld-powerpc/tlsld.s: New tests.
* testsuite/ld-powerpc/powerpc.exp: Run them.
The Cortex-A53 erratum currently has two ways it can resolve the erratum when
using the flag --fix-cortex-a53-843419:
1) If the address is within the range of an ADR instruction it rewrites the ADRP
into an ADR, and those doesn't need the use of a veneer.
2) If the address is not within range, it adds a branch to a veneer which will
execute the final bit of the erratum workaround and branch back to the call
site.
When we do this we always generate the veneers and we always align the size of
the text section to 4KB. This is because we only know which workaround we can
use after all linking has finished and all addresses are known. This means even
though the veneers are not used, we still generate the section and we still
change the size of the input section.
This is problematic for small memory devices as this would require the user to
take about a ~4KB hit in memory even though it's not even used.
Since there's no real way to restart the linking process from the final write
phase this patch solves the issue by allowing the user more control over which
erratum workaround gets used.
Concretely this changes the option --fix-cortex-a53-843419 to take optional
arguments --fix-cortex-a53-843419[=full|adr|adrp]
- full (default): Use both ADRP and ADR workaround. This is equivalent to not
specifying any options and is the default behavior before this
patch.
- adr: Only use the ADR workaround, this will not cause any increase in binary
size but linking will fail if the referenced address is out of range of
an ADR instruction.
- adrp: Use only the ADRP workaround, this will never rewrite your ADRP.
In the cases where the user knows how big their binaries are the `adr` option
would prevent the unneeded overhead.
bfd/ChangeLog:
PR ld/24373
* bfd-in.h (enum erratum_84319_opts): New
(bfd_elf64_aarch64_set_options, bfd_elf32_aarch64_set_options): Change
int to enum erratum_84319_opts.
* bfd-in2.h: Regenerate.
* elfnn-aarch64.c (struct elf_aarch64_link_hash_table): Change
fix_erratum_843419 to use new enum, remove fix_erratum_843419_adr.
(_bfd_aarch64_add_stub_entry_after): Conditionally create erratum stub.
(aarch64_size_one_stub): Conditionally size erratum 843419 stubs.
(_bfd_aarch64_resize_stubs): Amend comment.
(elfNN_aarch64_size_stubs): Don't generate stubs when no workaround
requested.
(bfd_elfNN_aarch64_set_options): Use new fix_erratum_843419 enum.
(_bfd_aarch64_erratum_843419_branch_to_stub): Implement selection of
erratum workaround.
(clear_erratum_843419_entry): Update erratum conditional.
ld/ChangeLog:
PR ld/24373
* emultempl/aarch64elf.em (PARSE_AND_LIST_LONGOPTS): Add optional args
to flags.
* NEWS: Add changes to flag.
(PARSE_AND_LIST_OPTIONS): Update help descriptions.
(PARSE_AND_LIST_ARGS_CASES): Add new options to parser.
* testsuite/ld-aarch64/aarch64-elf.exp: Add new run_dump_tests.
* testsuite/ld-aarch64/erratum843419-adr.d: New test.
* testsuite/ld-aarch64/erratum843419-adrp.d: New test.
* testsuite/ld-aarch64/erratum843419-far-adr.d: New test.
* testsuite/ld-aarch64/erratum843419-far-full.d: New test.
* testsuite/ld-aarch64/erratum843419-far.s: New test.
* testsuite/ld-aarch64/erratum843419-full.d: New test.
* testsuite/ld-aarch64/erratum843419-near.s: New test.
* testsuite/ld-aarch64/erratum843419-no-args.d: New test.
GOT and PLT relocs shouldn't have their symbols replaced with a
section symbol plus added. Nor should the HIGHA TLS relocations,
which failed to be caught by the range test in ppc_fix_adjustable.
bfd/
* reloc.c (BFD_RELOC_PPC64_TPREL16_HIGH, BFD_RELOC_PPC64_TPREL16_HIGHA),
(BFD_RELOC_PPC64_DTPREL16_HIGH, BFD_RELOC_PPC64_DTPREL16_HIGHA):
Sort before BFD_RELOC_PPC64_DTPREL16_HIGHESTA entry.
gas/
* config/tc-ppc.c (ppc_fix_adjustable): Exclude all GOT and PLT
relocs, and VLE sdarel relocs.
* testsuite/gas/ppc/power4.d: Adjust.
GNU as' Arm backend assumes each mnemonic has a single entry in the instruction table but VLDR (system register) and VSTR (system register) are different instructions than VLDR and VSTR. It is thus necessary to add some form of demultiplexing in the parser. It starts by creating a new operand type OP_VLDR which indicate that the operand is either the existing OP_RVSD operand or a system register. The function parse_operands () then tries these two cases in order, calling the new parse_sys_vldr_vstr for the second case.
Since the encoding function is specified in the instruction table entry, it also need to have some sort of demultiplexing. This is done in do_vldr_vstr which either calls the existing do_neon_ldr_str () or calls the new do_t_vldr_vstr_sysreg ().
A new internal relocation is needed as well since the offset has a shorter range than in other Thumb coprocessor instructions. Disassembly also requires special care since VSTR (system register) reuse the STC encoding with the coprocessor number 15. Armv8.1-M Mainline ARM manual states that coprocessor 8, 14 and 15 are reserved for floating-point and MVE instructions a feature bit check is added if the coprocessor number is one of this value and we are trying to match a coprocessor instruction (eg. STC) to forbid the match.
ChangeLog entries are as follows:
*** bfd/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* reloc.c (BFD_RELOC_ARM_T32_VLDR_VSTR_OFF_IMM): New internal
relocation.
* bfd-in2.h: Regenerate.
* libbfd.h: Likewise.
*** gas/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/tc-arm.c (parse_sys_vldr_vstr): New function.
(OP_VLDR): New enum operand_parse_code enumerator.
(parse_operands): Add logic for OP_VLDR.
(do_t_vldr_vstr_sysreg): New function.
(do_vldr_vstr): Likewise.
(insns): Guard VLDR and VSTR by arm_ext_v4t for Thumb mode.
(md_apply_fix): Add bound check for VLDR and VSTR co-processor offset.
Add masking logic for BFD_RELOC_ARM_T32_VLDR_VSTR_OFF_IMM relocation.
* testsuite/gas/arm/archv8m_1m-cmse-main-bad.s: Add examples of bad
uses of VLDR and VSTR.
* testsuite/gas/arm/archv8m_1m-cmse-main-bad.l: Add error messages for
above bad uses.
* testsuite/gas/arm/archv8m_1m-cmse-main.s: Add examples of VLDR and
VSTR valid uses.
* testsuite/gas/arm/archv8m_1m-cmse-main.d: Add disassembly for the
above examples.
*** opcodes/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* arm-dis.c (coprocessor_opcodes): Document new %J and %K format
specifier. Add entries for VLDR and VSTR of system registers.
(print_insn_coprocessor): Forbid coprocessor numbers 8, 14 and 15 in
coprocessor instructions on Armv8.1-M Mainline targets. Add handling
of %J and %K format specifier.
s patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils.
This patch adds support to the Scalar low overhead loop instructions:
LE
WLS
DLS
We also add a new assembler resolvable relocation bfd_reloc_code_real enum for the 12-bit branch offset used in these instructions.
ChangeLog entries are as follows:
*** bfd/ChnageLog ***
2019-04-12 Sudakshina Das <sudi.das@arm.com>
* reloc.c (BFD_RELOC_ARM_THUMB_LOOP12): New.
* bfd-in2.h: Regenerated.
* libbfd.h: Regenerated.
*** gas/ChangeLog ***
2019-04-12 Sudakshina Das <sudi.das@arm.com>
Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (operand_parse_code): Add OP_LR and OP_oLR
for the LR operand and optional LR operand.
(parse_operands): Add switch cases for OP_LR and OP_oLR for
both type checking and value checking.
(encode_thumb32_addr_mode): New entries for DLS, WLS and LE.
(v8_1_loop_reloc): New helper function for handling labels
for the low overhead loop instructions.
(do_t_loloop): New function to encode DLS, WLS and LE.
(insns): New entries for WLS, DLS and LE.
(md_pcrel_from_section): New switch case
for BFD_RELOC_ARM_THUMB_LOOP12.
(md_appdy_fix): Likewise.
(tc_gen_reloc): Likewise.
* testsuite/gas/arm/armv8_1-m-tloop.s: New.
* testsuite/gas/arm/armv8_1-m-tloop.d: New.
* testsuite/gas/arm/armv8_1-m-tloop-bad.s: New.
* testsuite/gas/arm/armv8_1-m-tloop-bad.d: New.
* testsuite/gas/arm/armv8_1-m-tloop-bad.l: New.
*** opcodes/ChangeLog ***
2019-04-12 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (print_insn_thumb32): Updated to accept new %P
and %Q patterns.
s patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils.
This patch adds the BFCSEL instruction. It also adds a local relocation with a new bfd_reloc_code_real enum.
ChangeLog entries are as follows:
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* reloc.c (BFD_RELOC_THUMB_PCREL_BFCSEL): New relocation.
* bfd-in2.h: Regenerated.
* libbfd.h: Likewise.
*** gas/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (T16_32_TAB): New entriy for bfcsel.
(do_t_v8_1_branch): New switch case for bfcsel.
(toU): Define.
(insns): New instruction for bfcsel.
(md_pcrel_from_section): New switch case
for BFD_RELOC_THUMB_PCREL_BFCSEL.
(md_appdy_fix): Likewise
(tc_gen_reloc): Likewise.
* testsuite/gas/arm/armv8_1-m-bfcsel.d: New.
* testsuite/gas/arm/armv8_1-m-bfcsel.s: New.
*** ld/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* testsuite/ld-arm/bfcsel.s: New.
* testsuite/ld-arm/bfcsel.d: New.
* testsuite/ld-arm/arm-elf.exp: Add above test.
*** opcodes/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (thumb32_opcodes): New instruction bfcsel.
(print_insn_thumb32): Edit the switch case for %Z.
Alan Modra
Christian Eggers
Tom Tromey
Nick Clifton
Martin Liska
Sudakshina Das
Jose E. Marchesi
Tamar Christina
Andre Vieira