EIST transition, T-states, C1E, or Adaptive Thermal Throttling (AAJ122).
This results in sporadic test fails. Disable btrace on those processors.
gdb/
* common/linux-btrace.c: Include sys/ptrace, sys/types, sys/wait.h,
and signal.h.
(linux_supports_btrace): Add kernel and
cpuid check.
(kernel_supports_btrace): New function.
(cpu_supports_btrace): New function.
(intel_supports_btrace): New function.
We define the following packets:
Qbtrace:bts enable branch tracing for the current thread
returns "OK" or "Enn"
Qbtrace:off disable branch tracing for the current thread
returns "OK" or "Enn"
qXfer:btrace:read read the full branch trace data for the current thread
gdb/
* target.h (enum target_object): Add TARGET_OBJECT_BTRACE.
* remote.c: Include btrace.h.
(struct btrace_target_info): New struct.
(remote_supports_btrace): New function.
(send_Qbtrace): New function.
(remote_enable_btrace): New function.
(remote_disable_btrace): New function.
(remote_teardown_btrace): New function.
(remote_read_btrace): New function.
(init_remote_ops): Add btrace ops.
(enum <unnamed>): Add btrace packets.
(struct protocol_feature remote_protocol_features[]): Add btrace packets.
(_initialize_remote): Add packet configuration for branch tracing.
gdbserver/
* target.h (struct target_ops): Add btrace ops.
(target_supports_btrace): New macro.
(target_enable_btrace): New macro.
(target_disable_btrace): New macro.
(target_read_btrace): New macro.
* gdbthread.h (struct thread_info): Add btrace field.
* server.c: Include btrace-common.h.
(handle_btrace_general_set): New function.
(handle_btrace_enable): New function.
(handle_btrace_disable): New function.
(handle_general_set): Call handle_btrace_general_set.
(handle_qxfer_btrace): New function.
(struct qxfer qxfer_packets[]): Add btrace entry.
* inferiors.c (remove_thread): Disable btrace.
* linux-low: Include linux-btrace.h.
(linux_low_enable_btrace): New function.
(linux_low_read_btrace): New function.
(linux_target_ops): Add btrace ops.
* configure.srv (i[34567]86-*-linux*): Add linux-btrace.o.
Add srv_linux_btrace=yes.
(x86_64-*-linux*): Add linux-btrace.o.
Add srv_linux_btrace=yes.
* configure.ac: Define HAVE_LINUX_BTRACE.
* config.in: Regenerated.
* configure: Regenerated.
Add a function to parse a btrace xml document into a vector of branch trace
blocks.
gdb/
* features/btrace.dtd: New file.
* Makefile.in (XMLFILES): Add btrace.dtd.
* btrace.h (parse_xml_btrace): New declaration.
* btrace.c: Include xml-support.h.
(parse_xml_btrace): New function.
(parse_xml_btrace_block): New function.
(block_attributes): New struct.
(btrace_attributes): New struct.
(btrace_children): New struct.
(btrace_elements): New struct.
* common/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Call also kill
for CHILD, ignore PTRACE_KILL errors, move the inner block variable
kill_status to outer block.
Fix entry-values if the callee called a noreturn function.
* dwarf2-frame-tailcall.c (dwarf2_tailcall_sniffer_first): Use
get_frame_address_in_block. Add new comment.
gdb/testsuite/
Fix entry-values if the callee called a noreturn function.
* gdb.arch/amd64-tailcall-noret.S: New file.
* gdb.arch/amd64-tailcall-noret.c: New file.
* gdb.arch/amd64-tailcall-noret.exp: New file.
Fix entry-values in C++ across CUs.
* dwarf2loc.c (call_site_to_target_addr) <FIELD_LOC_KIND_PHYSNAME>: Use
lookup_minimal_symbol. Add a comment.
* dwarf2read.c
(read_call_site_scope) <is_ref_attr> <die_is_declaration>: Prefer
DW_AT_linkage_name.
gdb/testsuite/
Fix entry-values in C++ across CUs.
* gdb.arch/amd64-tailcall-cxx.exp: New file.
* gdb.arch/amd64-tailcall-cxx1.S: New file.
* gdb.arch/amd64-tailcall-cxx1.cc: New file.
* gdb.arch/amd64-tailcall-cxx2.S: New file.
* gdb.arch/amd64-tailcall-cxx2.cc: New file.
gc-section support.
(elf64_aarch64_gc_sweep_hook): Handle GOT, TLS and PLT related relocs.
* lib/ld-lib.exp (check_gc_sections_available): Remove aarch64
from list of
targets that don't support gc-section.
* elf.c (elfcore_write_s390_tdb): New function.
(elfcore_write_register_note): Call it.
(elfcore_grok_s390_tdb): New function.
(elfcore_grok_note): Call it.
* readelf.c (get_note_type): Add NT_S390_TDB.
From: Pedro Alves <palves@redhat.com>
The find command's patter/buffer that is passed to the target is a
binary blob, not a string.
$ make WERROR_CFLAGS="-Wpointer-sign -Werror" findcmd.o -k 2>&1 1>/dev/null
../../src/gdb/findcmd.c: In function ‘find_command’:
../../src/gdb/findcmd.c:278:6: error: pointer targets in passing argument 3 of ‘target_search_memory’ differ in signedness [-Werror=pointer-sign]
In file included from ../../src/gdb/findcmd.c:26:0:
../../src/gdb/target.h:1582:12: note: expected ‘const gdb_byte *’ but argument is of type ‘char *’
gdb/
2013-03-08 Pedro Alves <palves@redhat.com>
* findcmd.c (put_bits): Change type of parameter to 'gdb_byte *'.
(parse_find_args, find_command): Change type of pattern buffer
locals to 'gdb_byte *'.
Hafiz Abid Qadeer <abidh@codesourcery.com>
gdb/
* NEWS: Mention set and show trace-buffer-size commands.
Mention new packet.
* target.h (struct target_ops): New method
to_set_trace_buffer_size.
(target_set_trace_buffer_size): New macro.
* target.c (update_current_target): Set up new method.
* tracepoint.c (trace_buffer_size): New global.
(start_tracing): Send it to the target.
(set_trace_buffer_size): New function.
(_initialize_tracepoint): Add new setshow for trace-buffer-size.
* remote.c (remote_set_trace_buffer_size): New function.
(_initialize_remote): Use it.
(QTBuffer:size) New remote command.
(PACKET_QTBuffer_size): New enum.
(remote_protocol_features): Add an entry for
PACKET_QTBuffer_size.
gdb/gdbserver/
* tracepoint.c (trace_buffer_size): New global.
(DEFAULT_TRACE_BUFFER_SIZE): New define.
(init_trace_buffer): Change to one-argument function. Allocate
trace buffer memory.
(handle_tracepoint_general_set): Call cmd_bigqtbuffer_size to
handle QTBuffer:size packet.
(cmd_bigqtbuffer_size): New function.
(initialize_tracepoint): Call init_trace_buffer with
DEFAULT_TRACE_BUFFER_SIZE.
* server.c (handle_query): Add QTBuffer:size in the
supported packets.
gdb/doc/
* gdb.texinfo (Starting and Stopping Trace Experiments): Document
trace-buffer-size set and show commands.
(Tracepoint Packets): Document QTBuffer:size.
(General Query Packets): Document QTBuffer:size.
gdb/testsuite/
* gdb.trace/trace-buffer-size.exp: New file.
* gdb.trace/trace-buffer-size.c: New file.
* write.h (struct fix): Add fx_dot_frag field.
(dot_frag): Declare.
* write.c (dot_frag): New variable.
(fix_new_internal): Set fx_dot_frag field with dot_frag.
(fixup_segment): Base calculation of fx_offset with fx_dot_frag.
* expr.c (expr): Save value of frag_now in dot_frag when setting
dot_value.
* read.c (emit_expr): Likewise. Delete comments.
$ make WERROR_CFLAGS="-Wpointer-sign -Werror" target.o -k 2>&1 1>/dev/null
../../src/gdb/target.c: In function ‘target_read_stralloc’:
../../src/gdb/target.c:2376:3: error: pointer targets in passing argument 1 of ‘strlen’ differ in signedness [-Werror=pointer-sign]
In file included from build-gnulib/import/string.h:27:0,
from ../../src/gdb/common/gdb_string.h:24,
from ../../src/gdb/target.c:24:
/usr/include/string.h:399:15: note: expected ‘const char *’ but argument is of type ‘gdb_byte *’
...
This is about the same as the previous patch.
Functions that take or return ascii-ish string arguments usually use
char* for parameters/return. That means that at points we call into
target methods that work with binary blobs, we need casts to/from
gdb_byte*/char*. To choose which type for the variables, I usually go
based on which requires the fewer casts, and what the contents of the
variable are supposed to hold, which often gives the same answer.
gdb/
2013-03-07 Pedro Alves <palves@redhat.com>
* target.c (target_read_stralloc, target_fileio_read_alloc):
*Cast pointer to 'gdb_byte *' in target call.
$ make WERROR_CFLAGS="-Wpointer-sign -Werror" corefile.o -k 2>&1 1>/dev/null
../../src/gdb/corefile.c: In function ‘read_memory_string’:
../../src/gdb/corefile.c:334:7: error: pointer targets in passing argument 2 of ‘read_memory’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/corefile.c:217:1: note: expected ‘gdb_byte *’ but argument is of type ‘char *’
Functions that take or return ascii-ish string arguments usually use
char* for parameters/return. That means that at points we call into
target methods that work with binary blobs, we need casts to
gdb_byte*.
gdb/
2013-03-07 Pedro Alves <palves@redhat.com>
* corefile.c (read_memory_string): Cast pointer to gdb_byte* in
call.
(trace_pass_command): Likewise.
* cli/cli-cmds.c: Include cli/cli-utils.h.
(source_command): Use skip-spaces.
(disassemble_command): Likewise.
* findcmd.c: Include cli/cli-utils.h.
(parse_find_args): Use skip_spaces.
* go32-nat.c: Include cli/cli-utils.h.
(go32_sldt): Use skip_spaces.
(go32_sgdt): Likewise.
(go32_sidt): Likewise.
(go32_pde): Likewise.
(go32_pte): Likewise.
(go32_pte_for_address): Likewise.
* infcmd.c: Include cli/cli-utils.h.
(registers_info): Use skip_spaces.
* linux-tdep.c (read_mapping): Use skip_spaces_const.
(linux_info_proc): Likewise.
* linux-thread-db.c: Include cli/cli-utils.h.
(info_auto_load_libthread_db): Use skip_spaces_const.
* m32r-rom.c: Include cli/cli-utils.h.
(m32r_upload_command): Use skip_spaces.
* maint.c: Include cli/cli-utils.h.
(maintenance_translate_address): Use skip_spaces.
* mi/mi-parse.c: Include cli/cli-utils.h.
(mi_parse_argv): Use skip_spaces.
(mi_parse): Likewise.
* minsyms.c: Include cli/cli-utils.h.
(msymbol_hash_iw): Use skip_spaces_const.
* objc-lang.c: Include cli/cli-utils.h.
(parse_selector): Use skip_spaces.
(parse_method): Likewise.
* python/python.c: Include cli/cli-utils.h.
(python_interactive_command)[HAVE_PYTHON]: Use skip_spaces.
(python_command)[HAVE_PYTHON]: Likewise.
(python_interactive_command)[!HAVE_PYTHON]: Likewise.
* remote-m32r-sdi.c: Include cli/cli-utils.h.
(m32r_load): Use skip_spaces.
* serial.c: Include cli/cli-utils.h.
(serial_open): Use skip_spaces_const.
* stack.c: Include cli/cli-utils.h.
(parse_frame_specification_1): Use skip_spaces_const.
* symfile.c: Include cli/cli-utils.h.
(set_ext_lang_command): Use skip_spaces.
* symtab.c: Include cli/cli-utils.h.
(rbreak_command): Use skip_spaces.
* thread.c (thread_name_command): Use skip_spaces.
* tracepoint.c (validate_actionline): Use skip_spaces.
(encode_actions_1): Likewise.
(trace_find_range_command): Likewise.
(trace_find_outside_command): Likewise.
(trace_dump_actions): Likewise.
Trimmed for brevity:
$ make WERROR_CFLAGS="-Wpointer-sign -Werror" c-lang.o expprint.o utils.o valprint.o varobj.o -k 2>&1 1>/dev/null
../../src/gdb/c-lang.c: In function ‘parse_one_string’:
../../src/gdb/c-lang.c:540:8: error: pointer targets in passing argument 3 of ‘convert_between_encodings’ differ in signedness [-Werror=pointer-sign]
In file included from ../../src/gdb/c-lang.c:30:0:
../../src/gdb/charset.h:64:6: note: expected ‘const gdb_byte *’ but argument is of type ‘char *’
../../src/gdb/expprint.c: In function ‘print_subexp_standard’:
../../src/gdb/expprint.c:205:2: error: pointer targets in passing argument 3 of ‘current_language->la_printstr’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/expprint.c:205:2: note: expected ‘const gdb_byte *’ but argument is of type ‘char *’
cc1: all warnings being treated as errors
make: *** [expprint.o] Error 1
../../src/gdb/utils.c: In function ‘host_char_to_target’:
../../src/gdb/utils.c:1474:9: error: pointer targets in passing argument 3 of ‘convert_between_encodings’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/varobj.c: In function ‘value_get_print_value’:
../../src/gdb/varobj.c:2934:8: error: pointer targets in return differ in signedness [-Werror=pointer-sign]
../../src/gdb/varobj.c:2968:12: error: pointer targets in assignment differ in signedness [-Werror=pointer-sign]
../../src/gdb/varobj.c:2971:3: error: pointer targets in return differ in signedness [-Werror=pointer-sign]
cc1: all warnings being treated as errors
make: *** [varobj.o] Error 1
As with the previous patch, the encoding conversion code works with
gdb_byte arrays as the generic buffers that hold strings of any
encoding/width. This patch adds casts where appropriate.
gdb/
2013-03-07 Pedro Alves <palves@redhat.com>
* c-lang.c (parse_one_string): Cast argument to gdb_byte *.
* expprint.c (print_subexp_standard): Likewise.
* utils.c (host_char_to_target): Likewise.
* valprint.c (generic_emit_char, generic_printstr): Likewise.
* varobj.c (value_get_print_value): Change type of local to char*.
Cast it gdb_byte * in call to language printer.
$ make WERROR_CFLAGS="-Wpointer-sign -Werror" charset.o 2>&1 1>/dev/null
../../src/gdb/charset.c: In function ‘wchar_iterate’:
../../src/gdb/charset.c:665:13: error: pointer targets in assignment differ in signedness [-Werror=pointer-sign]
../../src/gdb/charset.c:691:13: error: pointer targets in assignment differ in signedness [-Werror=pointer-sign]
../../src/gdb/charset.c:706:12: error: pointer targets in assignment differ in signedness [-Werror=pointer-sign]
The encoding conversion code works with gdb_byte arrays as the generic
buffers that hold strings of any encoding/width. Changing the type of
this field to gdb_byte* removes the need for one cast, and makes
everything work with the same types. That's good -- WRT to strings,
"char *" is (almost) consistently throughout GDB only used for
ascii-ish strings.
gdb/
2013-03-07 Pedro Alves <palves@redhat.com>
* charset.c (struct wchar_iterator) <input>: Change type to 'const
gdb_byte *'.
(make_wchar_iterator): Remove cast to char*.
(wchar_iterate): Change type of local.
$ make WERROR_CFLAGS="-Wpointer-sign -Werror" regcache.o 2>&1 1>/dev/null
../../src/gdb/regcache.c: In function ‘regcache_xmalloc_1’:
../../src/gdb/regcache.c:228:2: error: pointer targets in assignment differ in signedness [-Werror=pointer-sign]
../../src/gdb/regcache.c:235:2: error: pointer targets in assignment differ in signedness [-Werror=pointer-sign]
cc1: all warnings being treated as errors
regcache->register_status is "signed char".
gdb/
2013-03-07 Pedro Alves <palves@redhat.com>
* regcache.c (regcache_xmalloc_1): Call XCALLOC with signed char
for 'regcache->register_status'.
$ make WERROR_CFLAGS="-Wpointer-sign -Werror" breakpoint.o 2>&1 1>/dev/null
../../src/gdb/breakpoint.c: In function ‘breakpoint_xfer_memory’:
../../src/gdb/breakpoint.c:1578:2: error: pointer targets in passing argument 3 of ‘gdbarch_breakpoint_from_pc’ differ in signedness [-Werror=pointer-sign]
In file included from ../../src/gdb/defs.h:644:0,
from ../../src/gdb/breakpoint.c:20:
../../src/gdb/gdbarch.h:495:25: note: expected ‘int *’ but argument is of type ‘unsigned int *’
target_info.placed_size is an 'int', and gdbarch_breakpoint_from_pc
takes an int too.
gdb/
2013-03-07 Pedro Alves <palves@redhat.com>
* breakpoint.c.c (breakpoint_xfer_memory): Change type of local to
int.
$ make WERROR_CFLAGS="-Wpointer-sign -Werror" stap-probe.o 2>&1 1>/dev/null
../../src/gdb/stap-probe.c: In function ‘handle_stap_probe’:
../../src/gdb/stap-probe.c:1306:19: error: pointer targets in assignment differ in signedness [-Werror=pointer-sign]
cc1: all warnings being treated as errors
make: *** [stap-probe.o] Error 1
provider is a string, so it's rightfully a char*. 'data' holds raw
bytes (bfd_byte), so a cast is the right thing to do.
gdb/
2013-03-07 Pedro Alves <palves@redhat.com>
* stap-probe.c (handle_stap_probe): Add cast to char*.
$ make WERROR_CFLAGS="-Wpointer-sign -Werror" linux-record.o 2>&1 1>/dev/null
...
../../src/gdb/linux-record.c: In function ‘record_linux_system_call’:
../../src/gdb/linux-record.c:1152:9: error: pointer targets in passing argument 3 of ‘regcache_raw_read_signed’ differ in signedness [-Werror=pointer-sign]
In file included from ../../src/gdb/linux-record.c:23:0:
../../src/gdb/regcache.h:76:3: note: expected ‘long int *’ but argument is of type ‘long unsigned int *’
../../src/gdb/linux-record.c:1186:13: error: pointer targets in passing argument 3 of ‘regcache_raw_read_signed’ differ in signedness [-Werror=pointer-sign]
In file included from ../../src/gdb/linux-record.c:23:0:
../../src/gdb/regcache.h:76:3: note: expected ‘long int *’ but argument is of type ‘long unsigned int *’
I believe the read_signed calls are correct, and the variables are in
the wrong.
Tested on x86_64 Fedora 17.
gdb/
2013-03-07 Pedro Alves <palves@redhat.com>
* linux-record.c (record_linux_system_call) <gdb_sys_msgrcv,
RECORD_MSGRCV>: Pass a signed variable to
regcache_raw_read_signed, instead of an unsigned one.
tcp_retry_limit is installed as variable of an unsigned command:
add_setshow_uinteger_cmd ("connect-timeout", class_obscure,
&tcp_retry_limit, _("\
and I found no uses of the variable treating it as signed (like < 0
checks or some such).
2013-03-07 Pedro Alves <palves@redhat.com>
* ser-tcp.c (tcp_retry_limit): Change type to unsigned int.
Move the declarations to a header, rather than declaring them in
(multiple) .c files.
gdb/
2013-03-07 Pedro Alves <palves@redhat.com>
* remote.c (hex2bin, bin2hex): Move extern declarations to ...
* remote.h (hex2bin, bin2hex): ... here.
* tracepoint.c (hex2bin, bin2hex): Remove extern declarations.
Markus Metzger
gdbadmin
Alan Modra
Jan Kratochvil
Hafiz Abid Qadeer
Eli Zaretskii
Ian Lance Taylor
Nick Clifton
Yao Qi
Pedro Alves
Tom Tromey
Maciej W. Rozycki
Chung-Lin Tang
Keith Seitz
H.J. Lu