* infrun.c (context_switch): Don't save and load infrun state.
(context_switch_to): Delete.
* infcmd.c (proceed_thread_callback): Replace context_switch_to
calls by switch_to_thread calls.
* gdbthread.h (save_infrun_state, load_infrun_state): Delete.
* thread.c (main_thread_state, main_thread_executing): Delete.
(inferior_thread): Delete references to them.
(add_thread_silent): Fix case where we're adding a thread with the
same ptid as an exited thread. Remove references to
context-switching.
(load_infrun_state, save_infrun_state): Delete.
(thread_alive, is_thread_state, any_running, is_executing)
(set_executing): Remove the special handling for targets that
don't register any thread.
(restore_current_thread, thread_apply_all_command)
(do_captured_thread_select): Unconditionally call
switch_to_thread.
* mi/mi-main.c (mi_cmd_execute): Check for exited threads.
Call switch_to_thread instead of context_switch_to.
continuations.
* gdbthread.h (struct thread_info): Add comments around
continuations and intermediate_continuations.
(save_infrun_state, load_infrun_state): Delete continuations and
intermediate_continuations arguments.
* infrun.c (fetch_inferior_event): Only call normal_stop if
stop_soon is NO_STOP_QUIETLY.
(context_switch): Don't context-switch the continuations.
* thread.c (clear_thread_inferior_resources): Discard all
continuations of the thread we're clearing.
(save_infrun_state, load_infrun_state): Delete continuations and
intermediate_continuations arguments, and the code referencing
them.
* utils.c: Include "gdbthread.h".
(cmd_continuation, intermediate_continuation): Delete.
(add_continuation): Add thread_info* argument. Install the
continuation on it.
(restore_thread_cleanup): New.
(do_all_continuations_ptid, do_all_continuations_thread_callback):
New.
(do_all_continuations): Reimplement.
(discard_all_continuations_thread_callback,
discard_all_continuations_thread): New.
(discard_all_continuations): Reimplement.
(add_intermediate_continuation): Add thread_info* argument.
Install the continuation on it.
(do_all_intermediate_continuations_thread_callback)
(do_all_intermediate_continuations_thread): New.
(do_all_intermediate_continuations): Reimplement.
(discard_all_intermediate_continuations_thread_callback): New.
(discard_all_intermediate_continuations_thread): New.
(discard_all_intermediate_continuations): Reimplement.
* breakpoint.c (until_break_command): Install the continuation on
the current thread.
* defs.h (cmd_continuation, intermediate_continuation): Delete.
(struct thread_info): Forward declare.
(add_continuation, add_intermediate_continuation): Add
thread_info* argument.
(do_all_continuations_thread, discard_all_continuations_thread)
(do_all_intermediate_continuations_thread)
(discard_all_intermediate_continuations_thread): Declare.
* inf-loop.c (inferior_event_handler): In non-stop only run
continuations on the thread that stopped. In all-stop, run
continuations on all threads.
* infcmd.c (step_once, finish_command): Adjust.
* breakpoint.h (bpstat_do_actions): Remove bpstat* argument.
* breakpoint.c (bpstat_do_actions): Rename to ...
(bpstat_do_actions_1): ... this. Make static. Change return type
to int. Return true if a breakpoint proceeded.
(bpstat_do_actions): New, as wrapper around bpstat_do_actions_1.
(delete_breakpoint): Don't reference the global stop_bpstat; it's
gone.
* gdbthread.h (struct thread_info): Add stop_bpstat.
(save_infrun_state, load_infrun_state): Remove stop_bpstat
argument.
* thread.c (load_infrun_state, save_infrun_state): Remove
stop_bpstat argument, and the code referencing it.
* infcall.c: Include "gdbthread.h".
(call_function_by_hand): Adjust.
* exceptions.c: Include "gdbthread.h".
(throw_exception): Adjust.
* infcmd.c (stop_bpstat): Delete.
(continue_command): In all-stop, set the ignore count on the
thread that reported the stop. In non-stop, set it on the current
thread.
(finish_command_continuation): Adjust.
(program_info): Adjust.
* infrun.c (clear_proceed_status): Adjust.
(context_switch): Don't context-switch stop_bpstat.
(handle_inferior_event): Adjust.
(normal_stop): Adjust.
(save_inferior_status, restore_inferior_status): Adjust.
* inf-loop.c (inferior_event_handler): Remove parameter to
bpstat_do_actions call.
* top.c (command_loop): Remove parameter to bpstat_do_actions
call. Call it unconditionally.
* event-top.c (command_handler): Ditto.
* python/python.c (execute_gdb_command): Ditto.
hear about thread info, update inferior_ptid.
(core_open): Clear the thread list and set inferior_ptid before
acknowledging a new inferior. Find threads before fetching
register info. Give an upper target layer a chance to find and
claim new threads. Print core generation and stop signal info
after finding new threads.
(get_core_register_section): Look at the lwp member of
inferior_ptid for detecting if we have threads info, instead of
the pid member.
(core_pid_to_str): New.
(init_core_ops): Register core_pid_to_str.
* gnu-nat.c (inf_validate_procs): If this is the first time we're
seeing a thread id, extend the main thread's ptid. If we still
have pending execs, don't be verbose about new threads.
(gnu_wait, gnu_resume, gnu_attach, gnu_thread_alive)
(gnu_pid_to_str, cur_thread, sig_thread_cmd): Adjust.
* i386gnu-nat.c (gnu_fetch_registers, gnu_store_registers):
Adjust.
Add it to gdb's thread list.
(procfs_fetch_registers, procfs_store_registers): Assume there's
always an lwp.
(procfs_wait): Don't add the main thread here.
(procfs_init_inferior): Create a procinfo for the main lwp here.
Change main thread's ptid with thread_change_ptid.
(procfs_notice_thread): Check for exited threads.
(procfs_corefile_thread_callback): Remove check for the main
process.
(procfs_make_note_section): Assume there is always a thread.
* sol-thread.c (sol_thread_attach): Clear sol_thread_active before
attaching. Change the main thread ptid with thread_change_ptid.
(sol_thread_detach): Clear sol_thread_active.
(sol_thread_wait): Check for exited threads.
(sol_thread_create_inferior): Clear sol_thread_active before
creating a new inferior. Change the main thread ptid with
thread_change_ptid.
(sol_thread_mourn_inferior): Clear sol_thread_active.
(sol_find_new_threads_callback): Check for exited threads.
LWP_TERMINATE, resume the caller thread. On TTEVT_LWP_CREATE,
TTEVT_LWP_EXIT and TTEVT_LWP_TERMINATE, don't stop the whole
process, and return TARGET_WAITKIND_IGNORE.
(inf_ttrace_delete_dead_threads_callback): New.
(inf_ttrace_resume_lwp): New.
(inf_ttrace_resume_callback, inf_ttrace_resume): Rewrite. Don't
delete dying threads until they are really dead.
(inf_ttrace_wait): After stopping the whole process, delete any
dying thread that is really dead by now.
(inf_ttrace_thread_alive): Return 1.
(inf_ttrace_extra_thread_info): New.
(inf_ttrace_target): Register inf_ttrace_extra_thread_info.
of the child fork.
(inf_ttrace_attach): Add the main thread.
(inf_ttrace_resume_callback): Check for exited threads. Adjust
for always a thread.
(inf_ttrace_wait): Decorate the main thread's ptid with lwp info
using thread_change_ptid, and set its private data. Don't add the
main thread here.
(inf_ttrace_pid_to_str): Adjust.
(inf_ptrace_attach): Add the main thread here.
* linux-nat.c (linux_nat_attach): Don't add the main thread here.
Decorate the main thread id with the lwp id.
(stack_check_probe_2, stack_check_probe_loop_1)
(stack_check_probe_loop_2): New functions.
(main): Add call to these new functions.
* gdb.arch/powerpc-aix-prologue.exp: When breaking on these
functions, check that the breakpoint is inserted at the appropriate
location.
(insert_breakpoint): Slightly refine this procedure so that it can
be called several times in the test.
(check_for_saved): Use it instead of current_gdbarch.
(is_arg_spill): Add gdbarch paramter. Use it instead
of current_gdbarch.
(mep_analyze_prologue): Add gdbarch parameter. Pass it
to is_arg_spill and check_for_saved.
(mep_skip_prologue, mep_analyze_frame_prologue): Update calls.
Change argument of pulongest from CORE_ADDR to ULONGEST.
All callers updated.
* utils.c (plongest): Renamed from paddr_d.
(pulongest): Renamed from paddr_u, change arg type to ULONGEST.
* remote-mips.c (send_srec): Use paddr_nz instead of paddr_u in
`CORE_ADDR addr' arg of error message.
* ser-tcp.c (ser_tcp_send_break): New function.
(_initialize_ser_tcp): Use ser_tcp_send_break.
* ser-tcp.h (ser_tcp_send_break): New prototype.
2008-09-03 Angela Marie Thomas <angela@releasedominatrix.com>
* gdb.texinfo (Interrupts): Mention TCP interface for
sending BREAK.
non-permanent breakpoints.
(bpstat_stop_status): Change enable_state to bp_disabled only for
non-permanent breakpoints.
(bp_loc_is_permanent): New function.
(create_breakpoint): Check if the location points to a permanent
breakpoint and if it does, make breakpoint permanent.
(update_breakpoint_locations): Make sure new locations of permanent
breakpoints are properly initialized.
* i386-tdep.c (i386_skip_permanent_breakpoint): New function.
(i386_gdbarch_init): Set gdbarch_skip_permanent_breakpoint.
* gdb.arch/i386-bp_permanent.exp: New test.
* dummy-frame.c: Include "observer.h".
(dummy_frame_push): Do not check for stale frames.
(dummy_frame_pop): New function.
(cleanup_dummy_frames): New function.
(_initialize_dummy_frame): Install it as inferior_created observer.
* frame.h (struct frame_id): Update comments.
(frame_id_inner): Remove prototype.
* frame.c (frame_id_inner): Make static. Add comments.
(frame_find_by_id): Update frame_id_inner safety net check to avoid
false positives for targets using non-contiguous stack ranges.
(get_prev_frame_1): Update frame_id_inner safety net check.
(frame_pop): Call dummy_frame_pop when popping a dummy frame.
* stack.c (return_command): Directly pop the selected frame.
* infrun.c (handle_inferior_event): Remove dead code.
* i386-tdep.c (i386_push_dummy_call): Update comment.
(scan_dyntag_auxv): New function.
(elf_locate_base): Use it if scan_dyntag fails.
(find_program_interpreter): New function.
(enable_break): Use it instead of .interp section.
(ppc_linux_vmx_regset_sections): New structure.
(ppc_linux_fp_regset_sections): New structure.
(ppc_linux_init_abi): Select core-file regset based on target
features.
(create_overlay_event_breakpoint_1): ... this. Add OBJFILE parameter.
(create_overlay_event_breakpoint): Loop over all objfiles to install
multiple instances of the overlay event breakpoint if present.
(frame_map_name_to_regnum): Remove prototype.
* frame.c (frame_map_regnum_to_name): Remove.
(frame_map_name_to_regnum): Remove.
(frame_unwind_register_value): Use user_reg_map_regnum_to_name
instead of frame_map_regnum_to_name.
* ax-gdb.c: Include "user-regs.h".
(gen_expr): Use user_reg_map_name_to_regnum instead of
frame_map_name_to_regnum.
* eval.c: Include "user-regs.h".
(evaluate_subexp_standard): Use user_reg_map_name_to_regnum
instead of frame_map_name_to_regnum.
* infcmd.c (registers_info): Likewise.
* parse.c: Include "user-regs.h".
(write_dollar_variable): Use user_reg_map_name_to_regnum
instead of frame_map_name_to_regnum.
* tracepoint.c: Include "user-regs.h".
(encode_actions): Use user_reg_map_name_to_regnum
instead of frame_map_name_to_regnum.
* valops.c: Include "user-regs.h".
(value_fetch_lazy): Use user_reg_map_regnum_to_name instead
of frame_map_regnum_to_name.
variable.
(process_full_comp_unit): Do not set processing_current_prefix.
(dwarf2_full_name): New function.
(read_func_scope): Do not set processing_current_prefix. Use
determine_prefix.
(read_structure_type): Do not set processing_current_prefix. Remove
unused inner cleanup.
(process_structure_scope): Do not set processing_current_prefix.
(read_enumeration_type): Use dwarf2_full_name.
(determine_class_name): Return a const char *. Put the result
on the objfile obstack. Use dwarf2_full_name.
(read_namespace_type): New function.
(read_namespace): Do not create the type here. Use
determine_prefix.
(read_typedef): Use dwarf2_full_name. Do not pass the name
to init_type.
(read_base_type): Do not pass the name to init_type. Handle
TYPE_FLAG_NOSIGN.
(read_unspecified_type): Do not pass the name to init_type.
(new_symbol): Use dwarf2_full_name instead of
processing_current_prefix.
(read_type_die): Do not set processing_current_prefix. Handle
DW_TAG_namespace.
(determine_prefix): Handle specifications. Return the result
on the objfile obstack. Handle unions correctly.
cp_scan_for_anonymous_namespaces here.
(finish_block): Do not call cp_set_block_scope here.
* cp-namespace.c (processing_has_namespace_info)
(processing_current_prefix): Delete.
(cp_initialize_namespace): Do not initialize
processing_has_namespace_info.
(cp_scan_for_anonymous_namespaces): Use SYMBOL_DEMANGLED_NAME. Do
not check processing_has_namespace_info.
(cp_set_block_scope): Take prefix and namespace info flag as
arguments. Honor namespaces regardless of a demangled name.
* cp-support.h (processing_has_namespace_info)
(processing_current_prefix): Delete declarations.
(cp_set_block_scope): Update prototype.
* dwarf2read.c (processing_has_namespace_info)
(processing_current_prefix): New static variables.
(read_file_scope): Initialize processing_has_namespace_info.
(read_func_scope): Call cp_set_block_scope for C++.
(new_symbol): Call cp_scan_for_anonymous_namespaces for C++.
* symtab.c (symbol_demangled_name): Accept a const argument.
* symtab.h (symbol_demangled_name): Update prototype.
* blockframe.c (find_pc_partial_function): Likewise.
* buildsym.c (find_symbol_in_list): Likewise.
* c-valprint.c (c_val_print): Likewise.
* coffread.c (patch_opaque_types, process_coff_symbol): Likewise.
(coff_read_enum_type): Likewise. Use SYMBOL_SET_LINKAGE_NAME.
* cp-support.c (cp_remove_params): Renamed from remove_params and
made global.
(overload_list_add_symbol): Update call to remove_params.
* cp-support.h (cp_remove_params): Declare.
* dwarf2read.c (process_enumeration_scope): Use SYMBOL_LINKAGE_NAME.
(dwarf2_const_value): Use SYMBOL_PRINT_NAME.
* expprint.c (dump_subexp_body_standard): Likewise.
* f-valprint.c (info_common_command, there_is_a_visible_common_named):
Use SYMBOL_LINKAGE_NAME to find symbols and SYMBOL_PRINT_NAME
for messages.
* findvar.c (read_var_value): Use SYMBOL_LINKAGE_NAME.
* gnu-v2-abi.c (gnuv2_value_rtti_type): Likewise.
* hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline)
(hppa_hpux_skip_trampoline_code): Use SYMBOL_LINKAGE_NAME to find
symbols and SYMBOL_PRINT_NAME for messages.
* jv-lang.c (add_class_symbol): Use SYMBOL_SET_LINKAGE_NAME.
* linespec.c (decode_line_2): Use SYMBOL_LINKAGE_NAME.
* mdebugread.c (parse_symbol): Use SYMBOL_LINKAGE_NAME and
SYMBOL_SET_LINKAGE_NAME.
(mylookup_symbol): Use SYMBOL_LINKAGE_NAME.
* minsyms.c (add_minsym_to_demangled_hash_table): Use
SYMBOL_SEARCH_NAME.
(lookup_minimal_symbol): Use SYMBOL_LINKAGE_NAME or
SYMBOL_MATCHES_SEARCH_NAME, depending on the pass.
* objfiles.h (ALL_OBJFILE_MSYMBOLS): Use SYMBOL_LINKAGE_NAME.
* printcmd.c (build_address_symbolic): Use SYMBOL_LINKAGE_NAME.
(address_info): Use SYMBOL_PRINT_NAME for messages and
SYMBOL_LINKAGE_NAME for lookups.
* sol-thread.c (info_cb): Use SYMBOL_PRINT_NAME for messages.
* stabsread.c (patch_block_stabs, define_symbol)
(read_type, read_enum_type, common_block_end)
(cleanup_undefined_types_1, scan_file_globals): Use
SYMBOL_LINKAGE_NAME, SYMBOL_SET_LINKAGE_NAME, ALL_OBJFILE_MSYMBOLS,
and SYMBOL_PRINT_NAME.
* stack.c (print_frame_args): Use SYMBOL_LINKAGE_NAME.
(print_frame, frame_info): Use SYMBOL_PRINT_NAME for output. Use
cp_remove_params instead of cplus_demangle.
(print_block_frame_labels, print_frame_arg_vars): Use
SYMBOL_LINKAGE_NAME.
* symmisc.c (dump_msymbols): Use ALL_OBJFILE_MSYMBOLS and
SYMBOL_LINKAGE_NAME.
(dump_symtab_1, print_symbol, print_partial_symbols)
(maintenance_check_symtabs): Use SYMBOL_LINKAGE_NAME.
* symtab.h (DEPRECATED_SYMBOL_NAME): Delete.
(SYMBOL_SET_LINKAGE_NAME): New.
(SYMBOL_SET_NAMES): Add a comment.
* tracepoint.c (set_traceframe_context, validate_actionline)
(collect_symbol, scope_info): Use SYMBOL_LINKAGE_NAME for
lookups and SYMBOL_PRINT_NAME for output.
* typeprint.c (typedef_print): Use SYMBOL_LINKAGE_NAME.
* xcoffread.c (process_xcoff_symbol): Use SYMBOL_SET_LINKAGE_NAME.
Make the dwarf2_cu * parameter output as well as input. Update it if
we follow a reference to another CU.
(read_func_scope, determine_class_name, namespace_name, dwarf2_attr)
(die_type, die_containing_type): Update calls to changed functions.
Use the returned CU along with the returned DIE.
(read_namespace): Use dwarf2_attr instead of dwarf2_extension.
in the DIEs here.
(process_queue): Do not read in the DIEs here.
(psymtab_to_symtab_1): Update call to queue_comp_unit.
(read_full_die): Do not call queue_comp_unit from here.
(maybe_queue_comp_unit): New function.
(follow_die_ref): Use it.
(struct die_info): Change attrs to a trailing array.
(dwarf_alloc_die): Take the number of attributes. Allocate space
for them.
(read_full_die): Update call to dwarf_alloc_die. Do not manually
allocate attributes.
(struct dwarf2_cu): Replace die_ref_table with die_hash.
(struct die_info): Remove next_ref.
(store_in_ref_table): Remove offset argument. Rewrite to use
htab_find_slot_with_hash.
(die_hash, die_eq): New.
(read_comp_unit): Allocate the die_hash.
(read_die_and_children): Update call to store_die_ref.
(follow_die_ref): Rewrite to use htab_find_with_hash.
(dwarf_alloc_die): Take a CU argument. Allocate the new DIE
on the obstack.
(read_full_die): Update call to dwarf_alloc_die. Allocate
attributes on the CU obstack.
(free_one_comp_unit): Do not call free_die_list.
(read_die_and_siblings): Likewise. Do not add padding DIEs to the
sibling list.
(read_full_die): Do not allocate DIEs for abbrev 0.
(follow_die_ref): Correct error message.
* linespec.c (symtab_from_filename): Also throw NOT_FOUND_ERROR if
there are no symbols loaded, instead of throwing a generic error.
(decode_variable): Likewise.
gdb/testsuite/
* gdb.base/pending.exp: Test pending breakpoints without symbols
loaded.
(obj_section_offset, obj_section_addr, obj_section_endaddr): New
macros.
* objfiles.c (add_to_objfile_sections): Don't set addr, endaddr
and offset. Use size_t instead of unsigned long.
(build_objfile_section_table): Use size_t instead of unsigned
long.
(objfile_relocate): Don't relocate s->addr and s->endaddr, they're
gone.
(find_pc_sect_section): Use obj_section_addr and
obj_section_endaddr.
* symfile.c (symfile.c): Remove code that maps sections
offsets in "addr" to the object's sections.
* blockframe.c (find_pc_partial_function): Use obj_section_endaddr.
* gcore.c (gcore_create_callback): Use obj_section_addr and
obj_section_endaddr.
* maint.c (print_objfile_section_info): Likewise.
* printcmd.c (sym_info): Use obj_section_addr and
obj_section_endaddr.
* symtab.c (fixup_section): Likewise.
API to return LONGEST values rather than struct values.
(ada_evaluate_subexp): Change to use new API of discrete_type_low_bound
and discrete_type_high_bound.
(to_fixed_range_type): Create a range type in cases where
argument is base type and its limits are representable as ints.
(ada_is_modular_type): Correct so that base type must be integral.
* ada-lex.l (TRUEKEYWORD,FALSEKEYWORD): Make 'true' and 'false'
keywords when they appear alone, since we are phasing out
direct representation of these identifiers in ebugging data.
* ada-exp.y: Define 'true' and 'false' as primaries.
(type_boolean): New function.
(type_int,type_long,type_long_long,type_floattype_double)
(type_long_double): Remove uses of current_gdbarch for consistency
with type_boolean.
(write_int): Change comment to indicate that it might write boolean
constant as well.
* ada-typeprint.c (ada_print_type): Print '(false, true)' for boolean
type, since will no longer be represented as enumerated type in
debugging data.
* ada-valprint.c (print_optional_low_bound): Handle boolean case
as well.
behind from a previous inferior.
* target.c (pop_all_targets): Rename to ...
(pop_all_targets_above): ... this. Add a target stratum
parameter. Use it instead of hardcoding the dummy_stratum.
(pop_all_targets): New, defer to pop_all_targets_above.
(target_preopen): Use pop_all_targets_above.
* target.h (pop_all_targets_above): Declare.
lr_register.
(rs6000_in_function_epilogue_p): Check for bctr.
(skip_prologue): Initialize lr_register. Set lr_reg to a register
number. Set gpr_mask and used_bl. Continue scanning while some
expected registers are not saved. Set lr_register if LR is not
stored.
(rs6000_frame_cache): Handle gpr_mask and lr_register.
* gdb.arch/powerpc-prologue.exp: Correct saved registers.
('F' format) for @FIX names generated by the loader, retaining only
the minimal symbols (and no partial symbol tables) for these names.
Fixes warning messages about symbols that are found in partial
symbol tables, but not full symbol tables.
Include "features/rs6000/powerpc-vsx64.c".
(ppc_supply_vsxregset): New function.
(ppc_collect_vsxregset): New function.
(IS_VSX_PSEUDOREG): New macro.
(IS_EFP_PSEUDOREG): New macro.
(vsx_register_p): New function.
(ppc_vsx_support_p): New function.
(rs6000_builtin_type_vec128): New function.
(rs6000_register_name): Hide upper halves of vs0~vs31. Return
correct names for VSX registers and EFPR registers.
(rs6000_pseudo_register_type): Return correct types for VSX
and EFPR registers.
(rs6000_pseudo_register_reggroup_p): Return correct group for
VSX and EFPR registers.
(ppc_pseudo_register_read): Rename to dfp_pseudo_register_read.
(ppc_pseudo_register_write): Rename to dfp_pseudo_register_write.
(vsx_pseudo_register_read): New function.
(vsx_pseudo_register_write): New function.
(efpr_pseudo_register_read): New function.
(efpr_pseudo_register_write): New function.
(rs6000_pseudo_register_read): Call new VSX and EFPR read functions.
(rs6000_pseudo_register_write): Call new VSX and EFPR write functions.
(rs6000_gdbarch_init): Declare have_vsx.
Initialize new upper half VSX registers.
Initialize VSX-related and EFPR-related pseudo-registers variables.
Adjust the number of pseudo registers accordingly.
* ppc-linux-nat.c: Define PTRACE_GETVSXREGS, PTRACE_SETVSXREGS
and SIZEOF_VSRREGS.
(gdb_vsxregset_t): New type.
(have_ptrace_getsetvsxregs): New variable.
(fetch_vsx_register): New function.
(fetch_register): Handle VSX registers.
(fetch_vsx_registers): New function.
(fetch_ppc_registers): Handle VSX registers.
(store_ppc_registers): Handle VSX registers.
(store_vsx_register): New function.
(store_register): Handle VSX registers.
(store_vsx_registers): New function.
(ppc_linux_read_description): Handle VSX-enabled inferiors.
(gdb_vsxregset_t): New type.
(supply_vsxregset): New function.
(fill_vsxregset): New function.
* ppc-tdep.h (vsx_register_p): New prototype.
(vsx_support_p): New prototype.
(ppc_vsr0_regnum): New variable.
(ppc_vsr0_upper_regnum): Likewise.
(ppc_efpr0_regnum): Likewise.
(ppc_builtin_type_vec128): New type.
(ppc_num_vsrs): New constant.
(ppc_num_vshrs): New constant.
(ppc_num_efprs): Likewise.
Define POWERPC_VEC_VSX PPC_VSR0_UPPER_REGNUM and PPC_VSR31_UPPER_REGNUM.
(ppc_supply_vsxregset): New prototype.
(ppc_collect_vsxregset): New prototype.
* ppc-linux-tdep.c: Include "features/rs6000/powerpc-vsx32l.c"
Include "features/rs6000/powerpc-vsx64l.c".
(_initialize_ppc_linux_tdep): Initialize VSX-enabled targets.
(ppc_linux_regset_sections): Add new ".reg-ppc-vsx" field.
(ppc32_linux_vsxregset): New 32-bit VSX-enabled regset.
(ppc_linux_regset_from_core_section): Handle VSX core section.
(ppc_linux_core_read_description): Support VSX-enabled core files.
* ppc-linux-tdep.h: Declare *tdesc_powerpc_vsx32l
Declare tdesc_powerpc_vsx64l
* corelow.c (get_core_register_section): Support VSX-enabled
core files.
* features/rs6000/power-vsx.xml: New VSX descriptions.
* features/rs6000/powerpc-vsx32.xml: New file.
* features/rs6000/powerpc-vsx32l.xml: New file.
* features/rs6000/powerpc-vsx64.xml: New file.
* features/rs6000/powerpc-vsx64l.xml: New file.
* features/rs6000/powerpc-vsx32.c: New file (generated).
* features/rs6000/powerpc-vsx32l.c: New file (generated).
* features/rs6000/powerpc-vsx64.c: New file (generated).
* features/rs6000/powerpc-vsx64l.c: New file (generated).
* features/Makefile: Updated with new descriptions.
* regformats/rs6000/powerpc-vsx32l.dat: New file (generated).
* regformats/rs6000/powerpc-vsx64l.dat: New file (generated).
* testsuite/gdb.arch/vsx-regs.c: New source file.
* testsuite/gdb.arch/vsx-regs.exp: New testcase.
* testsuite/lib/gdb.exp (skip_vsx_tests): New function.
* macrocmd.c (macro_define_command): Check for NULL argument.
(macro_undef_command): Likewise.
gdb/testsuite:
* gdb.base/macscp.exp: Add regression test for "macro define" or
"macro undef" with no arguments.
* breakpoint.c (always_inserted_auto, always_inserted_on)
(always_inserted_off, always_inserted_enums): New.
(always_inserted_mode): Change type to char* and point to
always_inserted_auto.
(show_always_inserted_mode): In auto mode, also show the current
effect of the option.
(breakpoints_always_inserted_mode): Adjust for the new auto mode.
(_initialize_breakpoint): Make the "set breakpoints
always-inserted" command an enum command. Extend help to describe
the auto mode.
gdb/doc/
* gdb.texinfo (breakpoint always-inserted) Describe the auto mode
setting, and make it the default.
(Non-Stop Mode): Remove "set breakpoints always-inserted 1" from
non-stop script example.
2008-08-12 Sandra Loosemore <sandra@codesourcery.com>
* gdb.texinfo (Remote Configuration): Document set remote noack-packet.
(Remote Protocol): Add Packet Acknowledgment to menu.
(Overview): Mention +/- can be disabled, and point to new section
where this is discussed in detail.
(General Query Packets): Document QStartNoAckMode packet, and
corresponding qSupported reply.
(Packet Acknowledgment): New section.
gdb/
2008-08-12 Pedro Alves <pedro@codesourcery.com>
Add no-ack mode to the remote protocol --- optionally stop ACKing
packets and responses when we have a reliable communication
medium.
Based on Apple's GDB, by Jason Molenda <jmolenda@apple.com>
* remote.c (struct remote_state): Add noack_mode field.
(PACKET_QStartNoAckMode): New.
(remote_start_remote): Don't any outstanding packet here.
(remote_open_1): Clear noack_mode. Ack any outstanding packet
here. Activate noack mode if requested.
(remote_protocol_features): Add QStartNoAckMode.
(remote_open_1):
(putpkt_binary): Don't send ack in noack mode.
(read_frame): Don't recompute the checksum in noack mode.
(getpkt_sane): Skip sending ack if in noack mode.
(_initialize_remote): Add set/show remote noack mode.
* NEWS: Note the new features.
gdb/gdbserver/
2008-08-12 Pedro Alves <pedro@codesourcery.com>
* remote-utils.c (noack_mode, transport_is_reliable): New globals.
(remote_open): Set or clear transport_is_reliable.
(putpkt_binary): Don't expect acks in noack mode.
(getpkt): Don't send ack/nac in noack mode.
* server.c (handle_general_set): Handle QStartNoAckMode.
(handle_query): If connected by tcp pass QStartNoAckMode+ in
qSupported.
(main): Reset noack_mode on every connection.
* server.h (noack_mode): Declare.
Pedro Alves <pedro@codesourcery.com>
gdb/doc
* gdb.texinfo (Threads): Move paragraph about automatic thread
selection to All-Stop Mode subsection.
(Thread Stops): Reorganize existing material into subsections.
Add introductory blurb and menu.
(Non-Stop Mode): New subsection.
(Background Execution): New subsection.
(Maintenance Commands): Add cross-references from async mode
commands to the new Background Execution section.
* disasm.c (gdb_disassemble_info): Set endian_code.
* gdbarch.sh (gdbarch_info): New field byte_order_for_code.
* gdbarch.h, gdbarch.c: Regenerate.
* arch-utils.c (initialize_current_architecture): Set the
default byte_order_for_code.
(gdbarch_info_init): Ditto.
(gdbarch_info_fill): Ditto.
* arm-tdep.c (SWAP_INT, SWAP_SHORT): New macros.
(thumb_analyze_prologue): Swap halfword if code endianness is
different from general endianness.
(arm_skip_prologue): Similarly.
(arm_scan_prologue): Ditto.
(thumb_get_next_pc): Ditto.
(arm_get_next_pc): Ditto.
(arm_gdbarch_init): Set byte_order_for_code from BE8 flag,
choose correct endianness for breakpoints.
call.
* cp-name-parser.y: Include "config.h".
* xml-tdesc.c (fetch_xml_from_file): Properly cast sentinel in
concat call.
* gdb_select.h: Include sys/time.h if sys/select.h is not
available.
(go32_stop, go32_kill_inferior): Delete the main thread.
(go32_create_inferior): Add it.
(go32_thread_alive, go32_pid_to_str): New.
(init_go32_ops): Register go32_thread_alive and go32_pid_to_str.
gdbarch to i386_fp_regnum_p and i386_fpc_regnum_p.
(go32_xfer_memory): Change type of myaddr parameter to gdb_byte.
(struct seg_descr, struct seg_descr): pack the whole struct
instead of each member individually.
DT_HP_DEBUG_PRIVATE. Add warning if DT_HP_DEBUG_PRIVATE is not set.
Revise comment.
(pa64_current_sos): Remove map private warning warning.
* solib-som.c: Include string.h and sys/utsname.h.
(get_hpux_major_release): New function.
(som_solib_create_inferior_hook): Read dynamic linker header. Warn
about shared library private mapping on HP-UX 11 and later. Only force
private mapping of shared libraries on HP-UX 10 and earlier.
(link_map_start): Delete warning.
H.J. Lu <hongjiu.lu@intel.com>
Mark Kettenis <kettenis@gnu.org>
* amd64-tdep.c (amd64_frame_cache): Add saved_sp_reg.
(amd64_init_frame_cache): Initialize saved_sp_reg.
(amd64_analyze_stack_align): New.
(amd64_analyze_prologue): Call it.
(amd64_frame_cache): Use saved_sp_reg if it is invalid. Don't set
%rip to 8 when halfway aligning the stack.
* amd64-tdep.h (amd64_regnum): Add AMD64_R9_REGNUM to
AMD64_R14_REGNUM.
* i386-tdep.c (i386_frame_cache): Remove stack_align. Add
saved_sp_reg.
(i386_alloc_frame_cache): Remove stack_align. Initialize
saved_sp_reg to -1.
(i386_analyze_stack_align): Rewrite.
(i386_frame_cache): Use saved_sp_reg if it is valid.
(target_pre_inferior): Call no_shared_libraries.
* infcmd.c (run_command_1): Do not call objfile_purge_solibs
or clear_solib.
(attach_command): Do not call clear_solib.
(remote_m32r_ptid): New.
(m32r_close): Delete the main thread.
(m32r_resume): Set inferior_ptid toA remote_m32r_ptid. Add the
main thread.
(m32r_kill, m32r_load, sdireset_command): Delete the main thread.
(_initialize_remote_m32r): Initialize remote_m32r_ptid.
* spu-tdep.c (info_spu_dma_cmdlist): Only show entries with
the valid bit set. Ensure display order respects partial
order defined by dependency bits.
testsuite/ChangeLog:
* gdb.arch/spu-info.exp: Updated for "info spu dma" changes.
standard Tcl configury bits.
Remove all Tcl, Tk, Itcl, Itk, etc definitions.
* configure.ac: Don't check if ../itcl exists when building
gdbtk. It could be installed.
Rewrite gdbtk configury to allow for using system-supplied
Tcl and Tk. Gdbtk no longer requires build-time access to
itcl and itk.
* Makefile.in: Remove everything related to itcl and itk.
Rewrite the Tcl bits for gdbtk to correspond to rewrite of
configure.ac.
Remove v850ice.o build rule.
(ALL_TCL_CFLAGS): New convenience defintion. Change all
gdbtk sources to use it.
* configure: Regenerate.
clarifications.
(Breakpoint Handling): Remove mention of BREAKPOINT macro.
(Longjmp Support): Update description to reflect how it is done
for targets without using native header.
(Symbol Handling): Add a little more general explanation.
(COFF, ELF): Mention stabs encapsulation.
(DWARF 3): New section.
(Adding a New Host): Scrub out some obsolete bits.
(Generic Host Support Files): Mention ser-pipe.c, ser-mingw.c.
(Host Conditionals): Remove descriptions of NO_STD_REGS,
HAVE_MMAP, HAVE_TERMIO, INT_MAX etc, LONGEST, HAVE_LONG_DOUBLE,
PRINTF_HAS_LONG_DOUBLE, SCANF_HAS_LONG_DOUBLE, L_SET, SEEK_CUR,
SEEK_SET, STOP_SIGNAL, USG.
(Raw and Virtual Register Representations): Ditto for
DEPRECATED_REGISTER_RAW_SIZE, DEPRECATED_REGISTER_VIRTUAL_SIZE,
DEPRECATED_REGISTER_VIRTUAL_TYPE, REGISTER_CONVERT_TO_TYPE.
(Target Conditionals): Ditto for DEPRECATED_FP_REGNUM,
DEPRECATED_FRAMELESS_FUNCTION_INVOCATION, DEPRECATED_FRAME_CHAIN,
DEPRECATED_FRAME_CHAIN_VALID, DEPRECATED_FRAME_INIT_SAVED_REGS,
DEPRECATED_FRAME_SAVED_PC, DEPRECATED_FUNCTION_START_OFFSET,
DEPRECATED_REGISTER_VIRTUAL_SIZE,
DEPRECATED_REGISTER_VIRTUAL_TYPE,
DEPRECATED_USE_STRUCT_CONVENTION.
Describe gdbarch_deprecated_fp_regnum.
Update description of gdbarch_print_insn.
(Adding a New Target): Scrub out obsolete bits.
(Obsolete Conditionals): Remove entire section.
(linux_nat_has_pending_sigint): New function, based on
linux_nat_has_pending.
(set_ignore_sigint, maybe_clear_ignore_sigint): New functions.
(stop_wait_callback): Remove flush_mask handling. Honor
ignore_sigint. Call maybe_clear_ignore_sigint. Pass NULL
to recursive calls.
(linux_nat_has_pending, flush_callback): Remove.
(linux_nat_filter_event): Check for ignore_sigint.
(linux_nat_wait): Remove flush_mask support and call to
flush_callback. Use set_ignore_sigint and maybe_clear_ignore_sigint.
* linux-nat.h (struct lwp_info): Add ignore_sigint field.
* gdb.threads/manythreads.exp: Use remote_expect instead of after.
Add a test for duplicated SIGINTs.
report events from resumed threads.
* gdb.threads/schedlock.exp (get_args): Update to work for any
value of NUM.
(Top level): Report the number of threads that did not resume.
PR gdb/1158:
* valops.c (value_struct_elt): Treat function-valued field as a
static method.
gdb/testsuite:
* gdb.base/callfuncs.c (struct struct_with_fnptr): New struct.
(function_struct, function_struct_ptr): New globals.
* gdb.base/callfuncs.exp (do_function_calls): Test calling via a
function pointer in a struct.
Ulrich Weigand
gdbadmin
Pedro Alves
Daniel Jacobowitz
Jerome Guitton
David Daney
Thiago Jung Bauermann
Paul Pluzhnikov
Doug Evans
Michael Snyder
Aleksandar Ristovski
Andreas Schwab
Jan Kratochvil
Tom Tromey
Luis Machado
Maciej W. Rozycki
Vladimir Prus
Mark Kettenis
Paul N. Hilfinger
Joel Brobecker
Sandra Loosemore
Kevin Buettner
Stan Shebs
Dave Anglin
H.J. Lu
Ralf Wildenhues
Phil Muldoon
Keith Seitz