This modifies the special __tls_get_addr stub that checks for a
tlsdesc style __tls_index entry and returns early. Not using r11
isn't much benefit at the moment but a followup patch will preserve
regs around the first call to __tls_get_addr when the __tls_index
entry isn't yet set up for an early return.
bfd/
* elf64-ppc.c (LD_R11_0R3, CMPDI_R11_0, STD_R11_0R1, LD_R11_0R1),
(MTLR_R11): Don't define.
(LD_R0_0R3, CMPDI_R0_0): Define.
(build_tls_get_addr_stub): Don't use r11 in stub.
ld/
* testsuite/ld-powerpc/tlsexe.d: Match new __tls_get_addr stub.
* testsuite/ld-powerpc/tlsexeno.d: Likewise.
* testsuite/ld-powerpc/tlsexetoc.d: Likewise.
* testsuite/ld-powerpc/tlsexetocno.d: Likewise.
* testsuite/ld-powerpc/tlsopt5.d: Likewise.
ld/ChangeLog
* testsuite/ld-x86-64/align-branch-1.d: Loosen instruction regexps
to admit whatever absolute address. The label-relative address is
what the test needs to verify.
ld/ChangeLog:
2020-01-16 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* scripttempl/elf32msp430.sc: Add input section rules for
.upper.{text,data,rodata,bss}.
* testsuite/ld-msp430-elf/msp430-elf.exp: Run new test.
* testsuite/ld-msp430-elf/upper-input-sections.s: New test.
gas/ChangeLog:
2020-01-15 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/tc-msp430.c (CHECK_RELOC_MSP430): Always generate 430X
relocations when the target is 430X, except when extracting part of an
expression.
(msp430_srcoperand): Adjust comment.
Initialize the expp member of the msp430_operand_s struct as
appropriate.
(msp430_dstoperand): Likewise.
* testsuite/gas/msp430/msp430.exp: Run new test.
* testsuite/gas/msp430/reloc-lo-430x.d: New test.
* testsuite/gas/msp430/reloc-lo-430x.s: New test.
include/ChangeLog:
2020-01-15 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* opcode/msp430.h (enum msp430_expp_e): New.
(struct msp430_operand_s): Add expp member to struct.
ld/ChangeLog:
2020-01-15 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* testsuite/ld-msp430-elf/msp430-elf.exp: Run new test.
* testsuite/ld-msp430-elf/reloc-lo-430x.s: New test.
Function symbols of course don't normally want .dynbss copies but
with some old versions of gcc they are needed to copy the function
descriptor. This patch restricts the cases where they are useful to
compilers using dot-symbols, and enables the warning regardless of
whether a PLT entry is emitted in the executable. PLTs in shared
libraries are affected by a .dynbss copy in the executable.
bfd/
PR 25384
* elf64-ppc.c (ELIMINATE_COPY_RELOCS): Update comment.
(ppc64_elf_adjust_dynamic_symbol): Don't allow .dynbss copies
of function symbols unless dot symbols are present. Do warn
whenever one is created, regardles of whether a PLT entry is
also emitted for the function symbol.
ld/
* testsuite/ld-powerpc/ambiguousv1b.d: Adjust expected output.
* testsuite/ld-powerpc/funref.s: Align func_tab.
* testsuite/ld-powerpc/funref2.s: Likewise.
* testsuite/ld-powerpc/funv1.s: Add dot symbols.
xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>
* elfarcv2.sc : Allow interrupt vector table to be located at an
arbitrary address. Use DWARF.sc file.
* elfarc.sc: Use DWARF.sc file.
PR 25327
* testsuite/ld-elf/shared.exp: Add -fcommon option to compiler
command line when building libcomm1.o and pr13250 tests.
* testsuite/ld-plugin/lto.exp: Likewise for pr20267 tests.
PR 25224
bfd * Makefile.am: Add z80-elf target support.
* configure.ac: Likewise.
* targets.c: Likewise.
* config.bfd: Add z80-elf target support and new arches: ez80 and z180.
* elf32-z80.c: New file.
* archures.c: Add new z80 architectures: eZ80 and Z180.
* coffcode.h: Likewise.
* cpu-z80.c: Likewise.
* bfd-in2.h: Likewise plus additional Z80 relocations.
* coff-z80.c: Add new relocations for Z80 target and local label check.
gas * config/tc-z80.c: Add new architectures: Z180 and eZ80. Add support
for assembler code generated by SDCC. Add new relocation types. Add
z80-elf target support.
* config/tc-z80.h: Add z80-elf target support. Enable dollar local
labels. Local labels starts from ".L".
* testsuite/gas/all/fwdexp.d: Fix failure due to symbol conflict.
* testsuite/gas/all/fwdexp.s: Likewise.
* testsuite/gas/z80/suffix.d: Fix failure on ELF target.
* testsuite/gas/z80/z80.exp: Add new tests
* testsuite/gas/z80/dollar.d: New file.
* testsuite/gas/z80/dollar.s: New file.
* testsuite/gas/z80/ez80_adl_all.d: New file.
* testsuite/gas/z80/ez80_adl_all.s: New file.
* testsuite/gas/z80/ez80_adl_suf.d: New file.
* testsuite/gas/z80/ez80_isuf.s: New file.
* testsuite/gas/z80/ez80_z80_all.d: New file.
* testsuite/gas/z80/ez80_z80_all.s: New file.
* testsuite/gas/z80/ez80_z80_suf.d: New file.
* testsuite/gas/z80/r800_extra.d: New file.
* testsuite/gas/z80/r800_extra.s: New file.
* testsuite/gas/z80/r800_ii8.d: New file.
* testsuite/gas/z80/r800_z80_doc.d: New file.
* testsuite/gas/z80/z180.d: New file.
* testsuite/gas/z80/z180.s: New file.
* testsuite/gas/z80/z180_z80_doc.d: New file.
* testsuite/gas/z80/z80_doc.d: New file.
* testsuite/gas/z80/z80_doc.s: New file.
* testsuite/gas/z80/z80_ii8.d: New file.
* testsuite/gas/z80/z80_ii8.s: New file.
* testsuite/gas/z80/z80_in_f_c.d: New file.
* testsuite/gas/z80/z80_in_f_c.s: New file.
* testsuite/gas/z80/z80_op_ii_ld.d: New file.
* testsuite/gas/z80/z80_op_ii_ld.s: New file.
* testsuite/gas/z80/z80_out_c_0.d: New file.
* testsuite/gas/z80/z80_out_c_0.s: New file.
* testsuite/gas/z80/z80_reloc.d: New file.
* testsuite/gas/z80/z80_reloc.s: New file.
* testsuite/gas/z80/z80_sli.d: New file.
* testsuite/gas/z80/z80_sli.s: New file.
ld * Makefile.am: Add new target z80-elf
* configure.tgt: Likewise.
* emultempl/z80.em: Add support for eZ80 and Z180 architectures.
* emulparams/elf32z80.sh: New file.
* emultempl/z80elf.em: Likewise.
* testsuite/ld-z80/arch_ez80_adl.d: Likewise.
* testsuite/ld-z80/arch_ez80_z80.d: Likewise.
* testsuite/ld-z80/arch_r800.d: Likewise.
* testsuite/ld-z80/arch_z180.d: Likewise.
* testsuite/ld-z80/arch_z80.d: Likewise.
* testsuite/ld-z80/comb_arch_ez80_z80.d: Likewise.
* testsuite/ld-z80/comb_arch_z180.d: Likewise.
* testsuite/ld-z80/labels.s: Likewise.
* testsuite/ld-z80/relocs.s: Likewise.
* testsuite/ld-z80/relocs_b_ez80.d: Likewise.
* testsuite/ld-z80/relocs_b_z80.d: Likewise.
* testsuite/ld-z80/relocs_f_z80.d: Likewise.
* testsuite/ld-z80/z80.exp: Likewise.
opcodes * z80-dis.c: Add support for eZ80 and Z80 instructions.
This fixes PR 25210 by specifying the the correct ELF class for AArch64 stubs.
After doing this the stub section starts behaving like a normal object file
loaded from disk. That is SEC_LINKER_CREATED causes us to have to write the
section manually.
This flag was added as a fix for PR 24753. I believe that
fix to still be correct as linker created sections don't have a size on disk
and it fixes the Arm bootstrap regression. But in this case specifying the
correct section class also makes the stub section not be considered by
compress.c.
So I'm partially revert this change so that we don't have to manage the section
manually as implied by SEC_LINKER_CREATED.
bfd/ChangeLog:
PR 25210
PR 24753
* elfnn-aarch64.c (_bfd_aarch64_create_stub_section): Set ELF class.
ld/ChangeLog:
PR 25210
PR 24753
* emultempl/aarch64elf.em (elf${ELFSIZE}_aarch64_add_stub_section):
Remove SEC_LINKER_CREATED.
* testsuite/ld-aarch64/aarch64-elf.exp: Add erratum835769-843419.
* testsuite/ld-aarch64/erratum835769-843419.d: New test.
I reckon it's quite OK to write &p->field in C when p might be NULL,
and lots of old C programmers probably agree with me. However, ubsan
disagrees and so do some people I respect. I suspect C++ influence is
to blame for the ubsan behaviour. See
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=92634. So far no one has
educated me as to why I'm wrong to claim that there isn't anything in
the C standard to say that p->field is always (*p).field. Note 79
doesn't quite do that because it doesn't cover null pointers. If
there was such an equivalence then you could claim &p->field has a
null pointer reference when p is NULL, even though no C compiler would
ever dereference p.
Anyway, to silence ubsan I'm going to apply the following though I
prefer to avoid casts when possible. And I'm using (void *)
deliberately because this is C, not C++!
* ldlang.c (lang_output_section_find_by_flags): Don't use &p->field
when p might be NULL.
* ldelf.c (output_rel_find, ldelf_place_orphan): Likewise.
(insert_os_after, lang_insert_orphan, lookup_name): Likewise.
(strip_excluded_output_sections, lang_clear_os_map): Likewise.
(lang_check, lang_for_each_input_file): Likewise.
(lang_reset_memory_regions, find_replacements_insert_point): Likewise.
(find_rescan_insertion, lang_propagate_lma_regions): Likewise.
(lang_record_phdrs): Likewise.
* emultempl/alphaelf.em (alpha_after_open): Likewise.
* emultempl/mmo.em (mmo_place_orphan): Likewise.
* emultempl/pe.em (gld_${EMULATION_NAME}_place_orphan): Likewise.
* emultempl/pep.em (gld_${EMULATION_NAME}_place_orphan): Likewise.
* emultempl/ppc32elf.em (ppc_after_check_relocs): Likewise.
* emultempl/spuelf.em (spu_before_allocation): Likewise.
(embedded_spu_file): Likewise.
Changing objdump disassembly output like this always requires some
testsuite changes, with the avr and x64_64 changes simply due to
picking up better symbols, the whole point of the patch.
The mips changes are due to mips-sgi-irix changing STT_NOTYPE symbols
to STT_OBJECT, which objdump now chooses in preference to script
symbols. The problem is that objdump looks at the first symbol in the
section being disassembled, and if object type, just dumps out bytes
rather than disassembling. This results in new failures:
FAIL: JAL overflow 2
FAIL: undefined weak symbol overflow
FAIL: undefined weak symbol overflow (n32)
FAIL: undefined weak symbol overflow (n64)
So for mips-sgi-irix function symbols really do need to be function
type. I fixed a few more than just the required minimum to avoid the
above test fails.
binutils/
* objdump.c (compare_section): New static var.
(compare_symbols): Sort by current section only. Don't access
symbol name out of bounds when checking for file symbols.
Sort section symbols and object symbols.
(find_symbol_for_address): Remove bogus debugging and section
symbol test.
(disassemble_data): Move symbol sort from here..
(disassemble_section): ..to here. Set compare_section.
ld/
* testsuite/ld-avr/lds-mega.d: Adjust symbols to suit objdump change.
* testsuite/ld-avr/lds-tiny.d: Likewise.
* testsuite/ld-x86-64/load2.d: Likewise.
* testsuite/ld-mips-elf/compact-eh1.s: Give function symbols
function type.
* testsuite/ld-mips-elf/compact-eh1a.s: Likewise.
* testsuite/ld-mips-elf/compact-eh1b.s: Likewise.
* testsuite/ld-mips-elf/compact-eh2.s: Likewise.
* testsuite/ld-mips-elf/compact-eh3.s: Likewise.
* testsuite/ld-mips-elf/compact-eh3a.s: Likewise.
* testsuite/ld-mips-elf/eh-frame5.s: Likewise.
* testsuite/ld-mips-elf/ehdr_start-new.s: Likewise.
* testsuite/ld-mips-elf/ehdr_start-o32.s: Likewise.
* testsuite/ld-mips-elf/emit-relocs-1a.s: Likewise.
* testsuite/ld-mips-elf/jaloverflow-2.s: Likewise.
* testsuite/ld-mips-elf/jaloverflow.s: Likewise.
* testsuite/ld-mips-elf/mips16-call-global-1.s: Likewise.
* testsuite/ld-mips-elf/mips16-intermix-1.s: Likewise.
* testsuite/ld-mips-elf/mips16-pic-1b.s: Likewise.
* testsuite/ld-mips-elf/mips16-pic-4c.s: Likewise.
* testsuite/ld-mips-elf/no-shared-1-n64.s: Likewise.
* testsuite/ld-mips-elf/no-shared-1-o32.s: Likewise.
* testsuite/ld-mips-elf/pic-and-nonpic-1b-micromips.s: Likewise.
* testsuite/ld-mips-elf/pic-and-nonpic-1b.s: Likewise.
* testsuite/ld-mips-elf/pic-and-nonpic-2a.s: Likewise.
* testsuite/ld-mips-elf/pic-and-nonpic-3b.s: Likewise.
* testsuite/ld-mips-elf/pic-and-nonpic-4b.s: Likewise.
* testsuite/ld-mips-elf/pic-and-nonpic-5a.s: Likewise.
* testsuite/ld-mips-elf/pic-and-nonpic-6-n32c.s: Likewise.
* testsuite/ld-mips-elf/pic-and-nonpic-6-n64c.s: Likewise.
* testsuite/ld-mips-elf/pic-and-nonpic-6-o32c.s: Likewise.
* testsuite/ld-mips-elf/pie.s: Likewise.
* testsuite/ld-mips-elf/relax-jalr.s: Likewise.
* testsuite/ld-mips-elf/reloc-1a.s: Likewise.
* testsuite/ld-mips-elf/reloc-2a.s: Likewise.
* testsuite/ld-mips-elf/reloc-4.s: Likewise.
* testsuite/ld-mips-elf/reloc-5.s: Likewise.
* testsuite/ld-mips-elf/reloc-6b.s: Likewise.
* testsuite/ld-mips-elf/textrel-1.s: Likewise.
* testsuite/ld-mips-elf/undefweak-overflow.s: Likewise.
* testsuite/ld-mips-elf/undefweak-overflow.d: Adjust.
mips-sgi-irix gas emits STT_OBJECT symbols where other assemblers
would use STT_NOTYPE. See mips_frob_symbol in gas/config/tc-mips.c.
Also, the section of some dynamic symbols is set to SHN_MIPS_TEXT or
SHN_MIPS_DATA. See _bfd_mips_elf_finish_dynamic_symbol in
bfd/elfxx-mips.c. These differences are visible in readelf output
and cause some tests to fail for no other good reason.
The patch fixes the following fails and removes an xfail.
FAIL: ld-elf/pr23591
FAIL: PROVIDE_HIDDEN test (auxiliary shared object)
FAIL: PR ld/21233 dynamic symbols with section GC (auxiliary shared library)
* testsuite/ld-elf/pr21233-l.sd: Accept OBJECT for type and
PRC for section of symbols.
* testsuite/ld-elf/pr23591.d: Likewise.
* testsuite/ld-elf/provide-hidden-s.nd: Likewise.
* testsuite/ld-mips-elf/start.s: Make symbols function type.
* testsuite/ld-mips-elf/hash2.d: Adjust. Don't xfail irix.
This adds an alternative to using #... in dump files, useful where we
only want to allow specific extra output. DW_CFA_nop in CIEs and FDEs
to pad out to required alignment (larger for 64-bit than 32-bit) is
an example where these optional match patterns are useful.
binutils/
* testsuite/lib/binutils-common.exp (regexp_diff): Support #?REGEXP.
ld/
* testsuite/ld-elf/eh4.d: Match optional padding DW_CFA_nop in FDEs.
* testsuite/ld-elf/eh5.d: Likewise, and extra CIEs emitted on
embedded targets.
The flag controlling the default DWARF CIE version to produce now
starts with the value -1. This can be modified with the command line
flag as before, but after command line flag processing, in
md_after_parse_args targets can, if the global still has the value -1,
override this value. This gives a target specific default.
If a CIE version is not select either by command line flag, or a
target specific default, then some new code in dwarf2_init now select
a global default. This remains as version 1 to match previous
behaviour.
This RISC-V has a target specific default of version provided, this
make the return column uleb128, which means we can use all DWARF
registers include CSRs.
I chose to switch to version 3 rather than version 4 as this is most
similar to the global default (version 1). Switching to version 4
adds additional columns to the CIE header.
gas/ChangeLog:
* as.c (flag_dwarf_cie_version): Change initial value to -1, and
update comment.
* config/tc-riscv.c (riscv_after_parse_args): Set
flag_dwarf_cie_version if it has not already been set.
* dwarf2dbg.c (dwarf2_init): Initialise flag_dwarf_cie_version if
needed.
* testsuite/gas/riscv/default-cie-version.d: New file.
* testsuite/gas/riscv/default-cie-version.s: New file.
ld/ChangeLog:
* testsuite/ld-elf/eh5.d: Accept version 3 DWARF CIE.
Change-Id: Ibbfe8f0979fba480bf0a359978b09d2b3055555e
and other tidies. I think it's better to default to passing the
section to bfd_octets_per_byte, even in cases where we know it won't
make a difference.
A number of the coff reloc functions used bfd_octets_per_byte wrongly,
not factoring it into the offset into the data buffer. As it happens,
the targets using those files always had bfd_octets_per_byte equal to
one, so there wasn't any detectable wrong behaviour. However, it is
wrong in the source and might cause trouble for anyone creating a new
target. Besides fixing that, the patch also defines OCTETS_PER_BYTE
as one in target files where that is appropriate.
bfd/
* archures.c (bfd_octets_per_byte): Tail call
bfd_arch_mach_octets_per_byte.
* coff-arm.c (OCTETS_PER_BYTE): Define.
(coff_arm_reloc): Introduce new "octets" temp. Use OCTETS_PER_BYTE
with section. Correct "addr". Remove ATTRIBUTE_UNUSED.
* coff-i386.c (coff_i386_reloc): Similarly.
* coff-mips.c (mips_reflo_reloc): Similarly.
* coff-x86_64.c (coff_amd64_reloc): Similarly.
* elf32-msp430.c (OCTETS_PER_BYTE): Define.
(rl78_sym_diff_handler): Use OCTETS_PER_BYTE, with section.
* elf32-nds32.c (nds32_elf_get_relocated_section_contents): Similarly.
* elf32-ppc.c (ppc_elf_addr16_ha_reloc): Similarly.
* elf32-pru.c (pru_elf32_do_ldi32_relocate): Similarly.
* elf32-s12z.c (opru18_reloc): Similarly.
* elf32-sh.c (sh_elf_reloc): Similarly.
* elf32-spu.c (spu_elf_rel9): Similarly.
* elf32-xtensa.c (bfd_elf_xtensa_reloc): Similarly.
* elf64-ppc.c (ppc64_elf_ha_reloc, ppc64_elf_brtaken_reloc),
(ppc64_elf_toc64_reloc): Similarly.
* bfd.c (bfd_get_section_limit): Pass section to bfd_octets_per_byte.
* cofflink.c (_bfd_coff_link_input_bfd),
(_bfd_coff_reloc_link_order): Likewise.
* elf.c (_bfd_elf_section_offset): Likewise.
* elflink.c (resolve_section, bfd_elf_perform_complex_relocation),
(elf_link_input_bfd, elf_reloc_link_order, elf_fixup_link_order),
(bfd_elf_final_link): Likewise.
* elf.c (_bfd_elf_make_section_from_shdr): Don't strncmp twice
to set SEC_ELF_OCTETS.
* reloc.c (bfd_perform_relocation): Tidy SEC_ELF_OCTETS special case.
(bfd_install_relocation): Likewise.
(_bfd_final_link_relocate): Don't recalculate octets.
* syms.c (_bfd_stab_section_find_nearest_line): Introduc new
"octets" temp.
* bfd-in2.h: Regenerate.
ld/
* ldexp.c (fold_name): Pass section to bfd_octets_per_byte.
* ldlang.c (init_opb): Don't call bfd_arch_mach_octets_per_byte
unnecessarily.
All symbols, sizes and relocations in this section are octets instead of
bytes. Required for DWARF debug sections as DWARF information is
organized in octets, not bytes.
bfd/
* section.c (struct bfd_section): New flag SEC_ELF_OCTETS.
* archures.c (bfd_octets_per_byte): New parameter sec.
If section is not NULL and SEC_ELF_OCTETS is set, one octet es
returned [ELF targets only].
* bfd.c (bfd_get_section_limit): Provide section parameter to
bfd_octets_per_byte.
* bfd-in2.h: regenerate.
* binary.c (binary_set_section_contents): Move call to
bfd_octets_per_byte into section loop. Provide section parameter
to bfd_octets_per_byte.
* coff-arm.c (coff_arm_reloc): Provide section parameter
to bfd_octets_per_byte.
* coff-i386.c (coff_i386_reloc): likewise.
* coff-mips.c (mips_reflo_reloc): likewise.
* coff-x86_64.c (coff_amd64_reloc): likewise.
* cofflink.c (_bfd_coff_link_input_bfd): likewise.
(_bfd_coff_reloc_link_order): likewise.
* elf.c (_bfd_elf_section_offset): likewise.
(_bfd_elf_make_section_from_shdr): likewise.
Set SEC_ELF_OCTETS for sections with names .gnu.build.attributes,
.debug*, .zdebug* and .note.gnu*.
* elf32-msp430.c (rl78_sym_diff_handler): Provide section parameter
to bfd_octets_per_byte.
* elf32-nds.c (nds32_elf_get_relocated_section_contents): likewise.
* elf32-ppc.c (ppc_elf_addr16_ha_reloc): likewise.
* elf32-pru.c (pru_elf32_do_ldi32_relocate): likewise.
* elf32-s12z.c (opru18_reloc): likewise.
* elf32-sh.c (sh_elf_reloc): likewise.
* elf32-spu.c (spu_elf_rel9): likewise.
* elf32-xtensa.c (bfd_elf_xtensa_reloc): likewise
* elf64-ppc.c (ppc64_elf_brtaken_reloc): likewise.
(ppc64_elf_addr16_ha_reloc): likewise.
(ppc64_elf_toc64_reloc): likewise.
* elflink.c (bfd_elf_final_link): likewise.
(bfd_elf_perform_complex_relocation): likewise.
(elf_fixup_link_order): likewise.
(elf_link_input_bfd): likewise.
(elf_link_sort_relocs): likewise.
(elf_reloc_link_order): likewise.
(resolve_section): likewise.
* linker.c (_bfd_generic_reloc_link_order): likewise.
(bfd_generic_define_common_symbol): likewise.
(default_data_link_order): likewise.
(default_indirect_link_order): likewise.
* srec.c (srec_set_section_contents): likewise.
(srec_write_section): likewise.
* syms.c (_bfd_stab_section_find_nearest_line): likewise.
* reloc.c (_bfd_final_link_relocate): likewise.
(bfd_generic_get_relocated_section_contents): likewise.
(bfd_install_relocation): likewise.
For section which have SEC_ELF_OCTETS set, multiply output_base
and output_offset with bfd_octets_per_byte.
(bfd_perform_relocation): likewise.
include/
* coff/ti.h (GET_SCNHDR_SIZE, PUT_SCNHDR_SIZE, GET_SCN_SCNLEN),
(PUT_SCN_SCNLEN): Adjust bfd_octets_per_byte calls.
binutils/
* objdump.c (disassemble_data): Provide section parameter to
bfd_octets_per_byte.
(dump_section): likewise
(dump_section_header): likewise. Show SEC_ELF_OCTETS flag if set.
gas/
* as.h: Define SEC_OCTETS as SEC_ELF_OCTETS if OBJ_ELF.
* dwarf2dbg.c: (dwarf2_finish): Set section flag SEC_OCTETS for
.debug_line, .debug_info, .debug_abbrev, .debug_aranges, .debug_str
and .debug_ranges sections.
* write.c (maybe_generate_build_notes): Set section flag
SEC_OCTETS for .gnu.build.attributes section.
* frags.c (frag_now_fix): Don't divide by OCTETS_PER_BYTE if
SEC_OCTETS is set.
* symbols.c (resolve_symbol_value): Likewise.
ld/
* ldexp.c (fold_name): Provide section parameter to
bfd_octets_per_byte.
* ldlang (init_opb): New argument s. Set opb_shift to 0 if
SEC_ELF_OCTETS for the current section is set.
(print_input_section): Pass current section to init_opb.
(print_data_statement,print_reloc_statement,
print_padding_statement): Likewise.
(lang_check_section_addresses): Call init_opb for each
section.
(lang_size_sections_1,lang_size_sections_1,
lang_do_assignments_1): Likewise.
(lang_process): Pass NULL to init_opb.
Make _bfd_riscv_relax_call handle section alignment padding same as
the _bfd_riscv_relax_lui and _bfd_riscv_relax_pc functions already
do. Use the max section alignment if section boundaries are crossed,
otherwise the alignment of the containing section.
bfd/
PR 25181
* elfnn-riscv.c (_bfd_riscv_relax_call): Always add max_alignment to
foff. If sym_sec->output_section and sec->output_section are the same
and not *ABS* then set max_alignment to that section's alignment.
ld/
PR 25181
* testsuite/ld-riscv-elf/call-relax-0.s: New file.
* testsuite/ld-riscv-elf/call-relax-1.s: New file.
* testsuite/ld-riscv-elf/call-relax-2.s: New file.
* testsuite/ld-riscv-elf/call-relax-3.s: New file.
* testsuite/ld-riscv-elf/call-relax.d: New test.
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Run call-relax test.
Change-Id: Iaf65cee52345abf1955f36e8e72c4f6cc0db8d9a