Since 2273f0ac95 ("change minsyms not to be relocated at
read-time"), printing TLS symbols of objfiles with a non-zero base
address, without debug info, fails.
E.g., with:
$ mv /usr/lib/debug /usr/lib/debug-x
to get debug info out of the way, we get:
$ echo 'int main(){}' | gcc -pthread -x c -
$ ./gdb -q -ex start -ex 'p (int) errno' ./a.out
Cannot access memory at address 0xffffef7c0698
instead of the expected:
$1 = 0
The regression is not visible with glibc debuginfo installed.
The problem is that we compute the address of TLS minsyms incorrectly.
To trigger the problem, it is important that the variable is in an
objfile with a non-zero base address. While glibc is a shared library
for 'errno', it's easier for the testcase to use PIE instead of a
shlib. For TLS variables in PT_EXEC the regression obviously does not
happen.
gdb/ChangeLog
2017-09-06 Jan Kratochvil <jan.kratochvil@redhat.com>
* parse.c (find_minsym_type_and_address): Don't relocate addresses
of TLS symbols.
gdb/testsuite/ChangeLog
2017-09-06 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.threads/tls-nodebug-pie.c: New file.
* gdb.threads/tls-nodebug-pie.exp: New file.
An earlier commit made GDB no longer assume no-debug-info functions
return int. This commit gives the same treatment to variables.
Currently, you can end misled by GDB over output like this:
(gdb) p var
$1 = -1
(gdb) p /x var
$2 = 0xffffffff
until you realize that GDB is assuming that the variable is an "int",
because:
(gdb) ptype var
type = <data variable, no debug info>
You may try to fix it by casting, but that doesn't really help:
(gdb) p /x (unsigned long long) var
$3 = 0xffffffffffffffff # incorrect
^^
That's incorrect output, because the variable was defined like this:
uint64_t var = 0x7fffffffffffffff;
^^
What happened is that with the cast, GDB did an int -> 'unsigned long
long' conversion instead of reinterpreting the variable as the cast-to
type. To get at the variable properly you have to reinterpret the
variable's address manually instead, with either:
(gdb) p /x *(unsigned long long *) &var
$4 = 0x7fffffffffffffff
(gdb) p /x {unsigned long long} &var
$5 = 0x7fffffffffffffff
After this commit GDB does it for you. This is what you'll get
instead:
(gdb) p var
'var' has unknown type; cast it to its declared type
(gdb) p /x (unsigned long long) var
$1 = 0x7fffffffffffffff
As in the functions patch, the "compile" machinery doesn't currently
have the cast-to type handy, so it continues assuming no-debug
variables have int type, though now at least it warns.
The change to gdb.cp/m-static.exp deserves an explanation:
- gdb_test "print 'gnu_obj_1::method()::sintvar'" "\\$\[0-9\]+ = 4" \
+ gdb_test "print (int) 'gnu_obj_1::method()::sintvar'" "\\$\[0-9\]+ = 4" \
That's printing the "sintvar" function local static of the
"gnu_obj_1::method()" method.
The problem with that test is that that "'S::method()::static_var'"
syntax doesn't really work in C++ as you'd expect. The way to make it
work correctly currently is to quote the method part, not the whole
expression, like:
(gdb) print 'gnu_obj_1::method()'::sintvar
If you wrap the whole expression in quotes, like in m-static.exp, what
really happens is that the parser considers the whole string as a
symbol name, but there's no debug symbol with that name. However,
local statics have linkage and are given a mangled name that demangles
to the same string as the full expression, so that's what GDB prints.
After this commit, and without the cast, the print in m-static.exp
would error out saying that the variable has unknown type:
(gdb) p 'gnu_obj_1::method()::sintvar'
'gnu_obj_1::method()::sintvar' has unknown type; cast it to its declared type
TBC, if currently (even before this series) you try to print any
function local static variable of type other than int, you'll get
bogus results. You can see that with m-static.cc as is, even.
Printing the "svar" local, which is a boolean (1 byte) still prints as
"int" (4 bytes):
(gdb) p 'gnu_obj_1::method()::svar'
$1 = 1
(gdb) ptype 'gnu_obj_1::method()::svar'
type = <data variable, no debug info>
This probably prints some random bogus value on big endian machines.
If 'svar' was of some aggregate type (etc.) we'd still print it as
int, so the problem would have been more obvious... After this
commit, you'll get instead:
(gdb) p 'gnu_obj_1::method()::svar'
'gnu_obj_1::method()::svar' has unknown type; cast it to its declared type
... so at least GDB is no longer misleading. Making GDB find the real
local static debug symbol is the subject of the following patches. In
the end, it'll all "Just Work".
gdb/ChangeLog:
2017-09-04 Pedro Alves <palves@redhat.com>
* ax-gdb.c: Include "typeprint.h".
(gen_expr_for_cast): New function.
(gen_expr) <OP_CAST, OP_CAST_TYPE>: Use it.
<OP_VAR_VALUE, OP_MSYM_VAR_VALUE>: Error out if the variable's
type is unknown.
* dwarf2read.c (new_symbol_full): Fallback to int instead of
nodebug_data_symbol.
* eval.c: Include "typeprint.h".
(evaluate_subexp_standard) <OP_VAR_VALUE, OP_VAR_MSYM_VALUE>:
Error out if symbol has unknown type.
<UNOP_CAST, UNOP_CAST_TYPE>: Common bits factored out to
evaluate_subexp_for_cast.
(evaluate_subexp_for_address, evaluate_subexp_for_sizeof): Handle
OP_VAR_MSYM_VALUE.
(evaluate_subexp_for_cast): New function.
* gdbtypes.c (init_nodebug_var_type): New function.
(objfile_type): Use it to initialize types of variables with no
debug info.
* typeprint.c (error_unknown_type): New.
* typeprint.h (error_unknown_type): New declaration.
* compile/compile-c-types.c (convert_type_basic): Handle
TYPE_CODE_ERROR; warn and fallback to int for variables with
unknown type.
gdb/testsuite/ChangeLog:
2017-09-04 Pedro Alves <palves@redhat.com>
* gdb.asm/asm-source.exp: Add casts to int.
* gdb.base/nodebug.c (dataglobal8, dataglobal32_1, dataglobal32_2)
(dataglobal64_1, dataglobal64_2): New globals.
* gdb.base/nodebug.exp: Test different expressions involving the
new globals, with print, whatis and ptype. Add casts to int.
* gdb.base/solib-display.exp: Add casts to int.
* gdb.compile/compile-ifunc.exp: Expect warning. Add cast to int.
* gdb.cp/m-static.exp: Add cast to int.
* gdb.dwarf2/dw2-skip-prologue.exp: Add cast to int.
* gdb.threads/tls-nodebug.exp: Check that gdb errors out printing
tls variable with no debug info without a cast. Test with a cast
to int too.
* gdb.trace/entry-values.exp: Add casts.
The fact that GDB defaults to assuming that functions return int, when
it has no debug info for the function has been a recurring source of
user confusion. Recently this came up on the errno pretty printer
discussions. Shortly after, it came up again on IRC, with someone
wondering why does getenv() in GDB return a negative int:
(gdb) p getenv("PATH")
$1 = -6185
This question (with s/getenv/random-other-C-runtime-function) is a FAQ
on IRC.
The reason for the above is:
(gdb) p getenv
$2 = {<text variable, no debug info>} 0x7ffff7751d80 <getenv>
(gdb) ptype getenv
type = int ()
... which means that GDB truncated the 64-bit pointer that is actually
returned from getent to 32-bit, and then sign-extended it:
(gdb) p /x -6185
$6 = 0xffffe7d7
The workaround is to cast the function to the right type, like:
(gdb) p ((char *(*) (const char *)) getenv) ("PATH")
$3 = 0x7fffffffe7d7 "/usr/local/bin:/"...
IMO, we should do better than this.
I see the "assume-int" issue the same way I see printing bogus values
for optimized-out variables instead of "<optimized out>" -- I'd much
rather that the debugger tells me "I don't know" and tells me how to
fix it than showing me bogus misleading results, making me go around
tilting at windmills.
If GDB prints a signed integer when you're expecting a pointer or
aggregate, you at least have some sense that something is off, but
consider the case of the function actually returning a 64-bit integer.
For example, compile this without debug info:
unsigned long long
function ()
{
return 0x7fffffffffffffff;
}
Currently, with pristine GDB, you get:
(gdb) p function ()
$1 = -1 # incorrect
(gdb) p /x function ()
$2 = 0xffffffff # incorrect
maybe after spending a few hours debugging you suspect something is
wrong with that -1, and do:
(gdb) ptype function
type = int ()
and maybe, just maybe, you realize that the function actually returns
unsigned long long. And you try to fix it with:
(gdb) p /x (unsigned long long) function ()
$3 = 0xffffffffffffffff # incorrect
... which still produces the wrong result, because GDB simply applied
int to unsigned long long conversion. Meaning, it sign-extended the
integer that it extracted from the return of the function, to 64-bits.
and then maybe, after asking around on IRC, you realize you have to
cast the function to a pointer of the right type, and call that. It
won't be easy, but after a few missteps, you'll get to it:
..... (gdb) p /x ((unsigned long long(*) ()) function) ()
$666 = 0x7fffffffffffffff # finally! :-)
So to improve on the user experience, this patch does the following
(interrelated) things:
- makes no-debug-info functions no longer default to "int" as return
type. Instead, they're left with NULL/"<unknown return type>"
return type.
(gdb) ptype getenv
type = <unknown return type> ()
- makes calling a function with unknown return type an error.
(gdb) p getenv ("PATH")
'getenv' has unknown return type; cast the call to its declared return type
- and then to make it easier to call the function, makes it possible
to _only_ cast the return of the function to the right type,
instead of having to cast the function to a function pointer:
(gdb) p (char *) getenv ("PATH") # now Just Works
$3 = 0x7fffffffe7d7 "/usr/local/bin:/"...
(gdb) p ((char *(*) (const char *)) getenv) ("PATH") # continues working
$4 = 0x7fffffffe7d7 "/usr/local/bin:/"...
I.e., it makes GDB default the function's return type to the type
of the cast, and the function's parameters to the type of the
arguments passed down.
After this patch, here's what you'll get for the "unsigned long long"
example above:
(gdb) p function ()
'function' has unknown return type; cast the call to its declared return type
(gdb) p /x (unsigned long long) function ()
$4 = 0x7fffffffffffffff # correct!
Note that while with "print" GDB shows the name of the function that
has the problem:
(gdb) p getenv ("PATH")
'getenv' has unknown return type; cast the call to its declared return type
which can by handy in more complicated expressions, "ptype" does not:
(gdb) ptype getenv ("PATH")
function has unknown return type; cast the call to its declared return type
This will be fixed in the next patch.
gdb/ChangeLog:
2017-09-04 Pedro Alves <palves@redhat.com>
* ada-lang.c (ada_evaluate_subexp) <TYPE_CODE_FUNC>: Don't handle
TYPE_GNU_IFUNC specially here. Throw error if return type is
unknown.
* ada-typeprint.c (print_func_type): Handle functions with unknown
return type.
* c-typeprint.c (c_type_print_base): Handle functions and methods
with unknown return type.
* compile/compile-c-symbols.c (convert_symbol_bmsym)
<mst_text_gnu_ifunc>: Use nodebug_text_gnu_ifunc_symbol.
* compile/compile-c-types.c: Include "objfiles.h".
(convert_func): For functions with unknown return type, warn and
default to int.
* compile/compile-object-run.c (compile_object_run): Adjust call
to call_function_by_hand_dummy.
* elfread.c (elf_gnu_ifunc_resolve_addr): Adjust call to
call_function_by_hand.
* eval.c (evaluate_subexp_standard): Adjust calls to
call_function_by_hand. Handle functions and methods with unknown
return type. Pass expect_type to call_function_by_hand.
* f-typeprint.c (f_type_print_base): Handle functions with unknown
return type.
* gcore.c (call_target_sbrk): Adjust call to
call_function_by_hand.
* gdbtypes.c (objfile_type): Leave nodebug text symbol with NULL
return type instead of int. Make nodebug_text_gnu_ifunc_symbol be
an integer address type instead of nodebug.
* guile/scm-value.c (gdbscm_value_call): Adjust call to
call_function_by_hand.
* infcall.c (error_call_unknown_return_type): New function.
(call_function_by_hand): New "default_return_type" parameter.
Pass it down.
(call_function_by_hand_dummy): New "default_return_type"
parameter. Use it instead of defaulting to int. If there's no
default and the return type is unknown, throw an error. If
there's a default return type, and the called function has no
debug info, then assume the function is prototyped.
* infcall.h (call_function_by_hand, call_function_by_hand_dummy):
New "default_return_type" parameter.
(error_call_unknown_return_type): New declaration.
* linux-fork.c (call_lseek): Cast return type of lseek.
(inferior_call_waitpid, checkpoint_command): Adjust calls to
call_function_by_hand.
* linux-tdep.c (linux_infcall_mmap, linux_infcall_munmap): Adjust
calls to call_function_by_hand.
* m2-typeprint.c (m2_procedure): Handle functions with unknown
return type.
* objc-lang.c (lookup_objc_class, lookup_child_selector)
(value_nsstring, print_object_command): Adjust calls to
call_function_by_hand.
* p-typeprint.c (pascal_type_print_varspec_prefix): Handle
functions with unknown return type.
(pascal_type_print_func_varspec_suffix): New function.
(pascal_type_print_varspec_suffix) <TYPE_CODE_FUNC,
TYPE_CODE_METHOD>: Use it.
* python/py-value.c (valpy_call): Adjust call to
call_function_by_hand.
* rust-lang.c (rust_evaluate_funcall): Adjust call to
call_function_by_hand.
* valarith.c (value_x_binop, value_x_unop): Adjust calls to
call_function_by_hand.
* valops.c (value_allocate_space_in_inferior): Adjust call to
call_function_by_hand.
* typeprint.c (type_print_unknown_return_type): New function.
* typeprint.h (type_print_unknown_return_type): New declaration.
gdb/testsuite/ChangeLog:
2017-09-04 Pedro Alves <palves@redhat.com>
* gdb.base/break-main-file-remove-fail.exp (test_remove_bp): Cast
return type of munmap in infcall.
* gdb.base/break-probes.exp: Cast return type of foo in infcall.
* gdb.base/checkpoint.exp: Simplify using for loop. Cast return
type of ftell in infcall.
* gdb.base/dprintf-detach.exp (dprintf_detach_test): Cast return
type of getpid in infcall.
* gdb.base/infcall-exec.exp: Cast return type of execlp in
infcall.
* gdb.base/info-os.exp: Cast return type of getpid in infcall.
Bail on failure to extract the pid.
* gdb.base/nodebug.c: #include <stdint.h>.
(multf, multf_noproto, mult, mult_noproto, add8, add8_noproto):
New functions.
* gdb.base/nodebug.exp (test_call_promotion): New procedure.
Change expected output of print/whatis/ptype with functions with
no debug info. Test all supported languages. Call
test_call_promotion.
* gdb.compile/compile.exp: Adjust expected output to expect
warning.
* gdb.threads/siginfo-threads.exp: Likewise.
This patch fixes an internal error exposed by a test that does
something like:
define kill-and-remove
kill inferiors 2
remove-inferiors 2
end
# Start one inferior.
start
# Start another inferior.
add-inferior 2
inferior 2
start
# Kill and remove inferior 1 while inferior 2 is selected.
thread apply 1.1 kill-and-remove
The internal error looks like this:
Thread 1.1 (Thread 0x7ffff7fc2700 (LWP 20677)):
[Switching to inferior 1 [process 20677] (gdb/testsuite/outputs/gdb.threads/threadapply/threadapply)]
[Switching to thread 1.1 (Thread 0x7ffff7fc2700 (LWP 20677))]
#0 main () at src/gdb/testsuite/gdb.threads/threadapply.c:38
38 for (i = 0; i < NUM; i++)
src/gdb/inferior.c:66: internal-error: void set_current_inferior(inferior*): Assertion `inf != NULL' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) FAIL: gdb.threads/threadapply.exp: kill_and_remove_inferior: try kill-and-remove: thread apply 1.1 kill-and-remove (GDB internal error)
There are several problems around this area of the code. One is that
in do_restore_current_thread_cleanup, we do a look up of inferior by
ptid, which can find the wrong inferior if the previously selected
inferior exited and some other inferior was started with a reused pid
(rare, but still...).
The other problem is that the "remove-inferiors" command rejects
attempts to remove the current inferior, but when we get to
"remove-inferiors" in a "thread apply THR remove-inferiors 2" command,
the current inferior is the inferior of thread THR, not the previously
selected inferior, so if the previously selected inferior was inferior
2, that command still manages to wipe it, and then gdb restores the
old selected inferior, which is now a dangling pointer...
So the fix here is:
- Make make_cleanup_restore_current_thread store a pointer to the
previously selected inferior directly, and use it directly instead
of doing ptid look ups.
- Add a refcount to inferiors, very similar to thread_info's refcount,
that is incremented/decremented by
make_cleanup_restore_current_thread, and checked before deleting an
inferior. To avoid duplication, a new refcounted_object type is
added, that both thread_info and inferior inherit from.
gdb/ChangeLog:
2017-04-19 Pedro Alves <palves@redhat.com>
* common/refcounted-object.h: New file.
* gdbthread.h: Include "common/refcounted-object.h".
(thread_info): Inherit from refcounted_object and add comments.
(thread_info::incref, thread_info::decref)
(thread_info::m_refcount): Delete.
(thread_info::deletable): Use the refcounted_object::refcount()
method.
* inferior.c (current_inferior_): Add comment.
(set_current_inferior): Increment/decrement refcounts.
(prune_inferiors, remove_inferior_command): Skip inferiors marked
not-deletable instead of comparing with the current inferior.
(initialize_inferiors): Increment the initial inferior's refcount.
* inferior.h (struct inferior): Forward declare.
Include "common/refcounted-object.h".
(current_inferior, set_current_inferior): Move declaration to
before struct inferior's definition, and fix comment.
(inferior): Inherit from refcounted_object. Add comments.
* thread.c (switch_to_thread_no_regs): Reference the thread's
inferior pointer directly instead of doing a ptid lookup.
(switch_to_no_thread): New function.
(switch_to_thread(thread_info *)): New function, factored out
from ...
(switch_to_thread(ptid_t)): ... this.
(restore_current_thread): Delete.
(current_thread_cleanup): Remove 'inf_id' and 'was_removable'
fields, and add 'inf' field.
(do_restore_current_thread_cleanup): Check whether old->inf is
alive instead of looking up an inferior by ptid. Use
switch_to_thread and switch_to_no_thread.
(restore_current_thread_cleanup_dtor): Use old->inf directly
instead of lookup up an inferior by id. Decref the inferior.
Don't restore 'removable'.
(make_cleanup_restore_current_thread): Same the inferior pointer
in old, instead of the inferior number. Incref the inferior.
Don't save/clear 'removable'.
gdb/testsuite/ChangeLog:
2017-04-19 Pedro Alves <palves@redhat.com>
* gdb.threads/threadapply.exp (kill_and_remove_inferior): New
procedure.
(top level): Call it.
* lib/gdb.exp (gdb_define_cmd): New procedure.
- Make sure we end up with no thread selected after the detach.
- Test both "thread apply all" and "thread apply $some_threads", for
completeness.
gdb/ChangeLog:
2017-04-13 Pedro Alves <palves@redhat.com>
PR threads/13217
* gdb.threads/threadapply.exp (thr_apply_detach): New procedure.
(top level): Call it twice, with different thread sets.
I see the following test fail from time to time, due to the racy test
in gdb.threads/thread-specific-bp.exp.
continue -a^M
Continuing.^M
^M
Thread 1 "thread-specific" hit Breakpoint 4, end () at binutils-gdb/gdb/testsuite/gdb.threads/thread-specific-bp.c:29^M
29 }^M
(gdb) [Thread 0x40322460 (LWP 12950) exited]^M
Thread-specific breakpoint 3 deleted - thread 2 no longer in the thread list.^M
FAIL: gdb.threads/thread-specific-bp.exp: non-stop: continue to end (timeout)
This patch changes gdb_test to gdb_test_multiple to match prompt only
instead of both prompt and anchor.
gdb/testsuite:
2017-04-05 Yao Qi <yao.qi@linaro.org>
* gdb.threads/thread-specific-bp.exp (check_thread_specific_breakpoint):
Use gdb_test_multiple, and don't match anchor.
The next patch will require checking the DejaGnu version. There is
already a test that does this,
gdb.threads/attach-many-short-lived-threads.exp. This patch introduces
a new procedure, dejagnu_version, and makes that test use it.
The version number is "right-padded" with zeroes, to make sure that we
always return a triplet (major, minor, patch).
The procedure does not consider the DejaGnu versions from git. For
example, if you used DejaGnu from its current master branch, the version
would be "1.6.1-git", meaning that 1.6.1 will be the next release. I
figured we'll cross that bridge when (and if) we get there.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (dejagnu_version): New proc.
* gdb.threads/attach-many-short-lived-threads.exp (bad_dejagnu):
Use dejagnu_version.
If you do "interrupt -a" just while some thread is stepping over a
breakpoint, gdb trips on an internal error.
The test added by this patch manages to trigger this consistently by
spawning a few threads that are constantly tripping on a conditional
breakpoint whose condition always evaluates to false. With current
gdb, you get:
~~~
interrupt -a
.../src/gdb/inline-frame.c:343: internal-error: void skip_inline_frames(ptid_t): Assertion `find_inline_frame_state (ptid) == NULL' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=on: iter=0: interrupt -a (GDB internal error)
[...]
.../src/gdb/inline-frame.c:343: internal-error: void skip_inline_frames(ptid_t): Assertion `find_inline_frame_state (ptid) == NULL' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=0: wait for stops (GDB internal error)
~~~
The assertion triggers because we're processing a stop for a thread
that had already stopped before and thus had already its inline-frame
state filled in.
Calling handle_inferior_event_1 directly within a
"thread_stop_requested" observer is something that I've wanted to get
rid of before, for being fragile. Nowadays, infrun is aware of
threads with pending events, so we can use that instead, and let the
normal fetch_inferior_event -> handle_inferior_event code path handle
the forced stop.
The change to finish_step_over is necessary because sometimes a thread
that was told to PTRACE_SINGLESTEP reports back a SIGSTOP instead of a
SIGTRAP (i.e., we tell it to single-step, and then interrupt it quick
enough that on the kernel side the thread dequeues the SIGTOP before
ever having had a chance of executing the instruction to be stepped).
SIGSTOP gets translated to a GDB_SIGNAL_0. And then finish_step_over
would miss calling clear_step_over_info, and thus miss restarting the
other threads (which in this case of threads with pending events,
means setting their "resumed" flag, so their pending events can be
consumed).
And now that we always restart threads in finish_step_over, we no
longer need to do that in handle_signal_stop.
Tested on x86_64 Fedora 23, native and gdbserver.
gdb/ChangeLog:
2017-03-08 Pedro Alves <palves@redhat.com>
PR gdb/18360
* infrun.c (start_step_over, do_target_resume, resume)
(restart_threads): Assert we're not resuming a thread that is
meant to be stopped.
(infrun_thread_stop_requested_callback): Delete.
(infrun_thread_stop_requested): If the thread is internally
stopped, queue a pending stop event and clear the thread's
inline-frame state.
(handle_stop_requested): New function.
(handle_syscall_event, handle_inferior_event_1): Use
handle_stop_requested.
(handle_stop_requested): New function.
(handle_signal_stop): Set the thread's stop_signal here instead of
at caller.
(finish_step_over): Clear step over info unconditionally.
(handle_signal_stop): If the user had interrupted the event
thread, consider the stop a random signal.
(handle_signal_stop) <signal arrived while stepping over
breakpoint>: Don't restart threads here.
(stop_waiting): Don't clear step-over info here.
gdb/testsuite/ChangeLog:
2017-03-08 Pedro Alves <palves@redhat.com>
PR gdb/18360
* gdb.threads/interrupt-while-step-over.c: New file.
* gdb.threads/interrupt-while-step-over.exp: New file.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
"single-process" and "multi-process" are used in the test message of
process-dies-while-detaching.exp, but they are misplaced due to
set mode [expr {$multi_process ? "single-process" : "multi-process"}]
This patch is to swap them.
gdb/testsuite:
2016-08-01 Yao Qi <yao.qi@linaro.org>
* gdb.threads/process-dies-while-detaching.exp (do_test): Set
variable mode to "multi-process" if $multi_process is 1, otherwise
set it to "single-process".
PR python/20190 arose from an exception I noticed when trying to use
the Python unwinder for Spider Monkey in Firefox.
The problem is that the unwinder wants to examine the value of a
thread-local variable. However, sympy_value rejects this because
symbol_read_needs_frame returns true for a TLS variable.
This problem arose once before, though in a different context:
https://sourceware.org/bugzilla/show_bug.cgi?id=11803
At the time Pedro and Daniel pointed out a simpler way to fix that bug
(see links in 20190 if you are interested); but for this new bug I
couldn't think of a similar fix and ended up implementing Daniel's
other suggestion:
https://sourceware.org/ml/gdb-patches/2010-07/msg00393.html
That is, this patch makes it possible to detect whether a symbol needs
a specific frame, or whether it just needs the inferior to have
registers.
Built and regtested on x86-64 Fedora 24.
2016-07-26 Tom Tromey <tom@tromey.com>
* symtab.c (register_symbol_computed_impl): Update.
PR python/20190:
* value.h (symbol_read_needs): Declare.
(symbol_read_needs_frame): Add comment.
* symtab.h (struct symbol_computed_ops) <read_variable>: Update
comment.
<get_symbol_read_needs>: Rename. Change return type.
* findvar.c (symbol_read_needs): New function.
(symbol_read_needs_frame): Rewrite.
(default_read_var_value): Use symbol_read_needs.
* dwarf2loc.c (struct symbol_needs_baton): Rename.
<needs>: Renamed from needs_frame. Changed type.
(needs_frame_read_addr_from_reg, symbol_needs_get_reg_value)
(symbol_needs_read_mem, symbol_needs_frame_base)
(symbol_needs_frame_cfa, symbol_needs_tls_address)
(symbol_needs_dwarf_call): Rename.
(needs_dwarf_reg_entry_value): Update.
(symbol_needs_ctx_funcs, dwarf2_loc_desc_get_symbol_read_needs):
Rename and update.
(locexpr_get_symbol_read_needs, loclist_symbol_needs): Likewise.
(dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Update.
* defs.h (enum symbol_needs_kind): New.
2016-07-26 Tom Tromey <tom@tromey.com>
PR python/20190:
* gdb.threads/tls.exp (check_thread_local): Add python symbol
test.
This commit fixes detaching on Linux when some thread exits the whole
thread group (process) just while we're detaching.
On Linux, a ptracer must detach from each LWP individually, with
PTRACE_DETACH. Since PTRACE_DETACH sets the thread running free, if
one of the already-detached threads causes the whole thread group to
exit (e.g., simply calls exit), the kernel force-kills the other
threads in the group, making them zombie, just as we're still
detaching them. Since PTRACE_DETACH against a zombie thread fails
with ESRCH, and gdb/gdbserver are not expecting this, the detach fails
with an error like: "Can't detach process: No such process.".
This patch detects this detach failure as normal, and instead of
erroring out, reaps the now-dead thread.
New test included, that exercises several different scenarios that
cause GDB/GDBserver to error out when it should not.
Tested on x86-64 GNU/Linux with {unix, native-gdbserver,
native-extended-gdbserver}
Note: without the previous fix, the "single-process + continue"
variant of the new test would fail with:
(gdb) PASS: gdb.threads/process-dies-while-detaching.exp: single-process: continue: watchpoint: switch to parent
continue
Continuing.
Warning:
Could not insert hardware watchpoint 3.
Could not insert hardware breakpoints:
You may have requested too many hardware breakpoints/watchpoints.
Command aborted.
(gdb) FAIL: gdb.threads/process-dies-while-detaching.exp: single-process: continue: watchpoint: continue
gdb/gdbserver/ChangeLog:
2016-07-01 Pedro Alves <palves@redhat.com>
Antoine Tremblay <antoine.tremblay@ericsson.com>
* linux-low.c: Change interface to take the target lwp_info
pointer directly and return void. Handle detaching from a zombie
thread.
(linux_detach_lwp_callback): New function.
(linux_detach): Detach from the leader thread after detaching from
the clone threads.
gdb/ChangeLog:
2016-07-01 Pedro Alves <palves@redhat.com>
Antoine Tremblay <antoine.tremblay@ericsson.com>
* inf-ptrace.c (inf_ptrace_detach_success): New function, factored
out from ...
(inf_ptrace_detach): ... here.
* inf-ptrace.h (inf_ptrace_detach_success): New declaration.
* linux-nat.c (get_pending_status): Rename to ...
(get_detach_signal): ... this, and return a host signal instead of
filling in a wait status.
(detach_one_lwp): New function, factored out from detach_callback
and adjusted to handle detaching from a zombie thread.
(detach_callback): Skip the leader thread.
(linux_nat_detach): No longer defer to inf_ptrace_detach to detach
the leader thread, nor build a signal string to pass down.
Instead, use target_announce_detach, detach_one_lwp and
inf_ptrace_detach_success.
gdb/testsuite/ChangeLog:
2016-07-01 Pedro Alves <palves@redhat.com>
Antoine Tremblay <antoine.tremblay@ericsson.com>
* gdb.threads/process-dies-while-detaching.c: New file.
* gdb.threads/process-dies-while-detaching.exp: New file.
If a target does not support making function calls from GDB then in a
number of test files, we currently report an XFAIL and skip some, or all
of the tests. This commit changes the XFAIL to an UNSUPPORTED as this
seems more appropriate in these cases.
Some of the tests used bug ID 2416 to be reported in the XFAIL. In the
current GDB bugzilla bug 2416 has nothing to do with calling target
functions from GDB.
gdb/testsuite/ChangeLog:
* gdb.base/call-ar-st.exp: Report unsupported rather than xfail
for unsupported target features.
* gdb.base/call-rt-st.exp: Likewise.
* gdb.base/call-sc.exp: Likewise.
* gdb.base/call-signal-resume.exp: Likewise.
* gdb.base/call-strs.exp: Likewise.
* gdb.base/callexit.exp: Likewise.
* gdb.base/callfuncs.exp: Likewise.
* gdb.base/nodebug.exp: Likewise.
* gdb.base/printcmds.exp: Likewise.
* gdb.base/ptype.exp: Likewise.
* gdb.base/structs.exp: Likewise.
* gdb.base/unwindonsignal.exp: Likewise.
* gdb.cp/gdb2495.exp: Likewise.
* gdb.cp/templates.exp: Likewise.
* gdb.cp/virtfunc.exp: Likewise.
* gdb.threads/hand-call-in-threads.exp: Likewise.
* gdb.threads/interrupted-hand-call.exp: Likewise.
* gdb.threads/thread-unwindonsignal.exp: Likewise.
If the testsuite is run with a DejaGnu version that predates the fix
from last year:
[PATCH] DejaGnu kills the wrong process due to PID-reuse races
http://lists.gnu.org/archive/html/dejagnu/2015-07/msg00005.html
... gdb.threads/attach-many-short-lived-threads.exp fails randomly,
often. Other tests randomly fail due to that issue too, but this one
is _much_ more exposed.
DejaGnu 1.6 was released meanwhile, which includes that DejaGnu fix,
and also some distros backported the fix too.
So skip the test when run with older/broken DejaGnus.
gdb/testsuite/ChangeLog:
2016-05-27 Pedro Alves <palves@redhat.com>
* gdb.threads/attach-many-short-lived-threads.exp (bad_dejagnu):
New procedure.
(top level): Call it, and bail out of DejaGnu is known to be bad.
When GDB attaches to a process, it looks at the /proc/PID/task/ dir
for all clone threads of that process, and attaches to each of them.
Usually, if there is more than one clone thread, it means the program
is multi threaded and linked with pthreads. Thus when GDB soon after
attaching finds and loads a libthread_db matching the process, it'll
add a thread to the thread list for each of the initially found
lower-level LWPs.
If, however, GDB fails to find/load a matching libthread_db, nothing
is adding the LWPs to the thread list. And because of that, "detach"
hits an internal error:
(gdb) PASS: gdb.threads/clone-attach-detach.exp: fg attach 1: attach
info threads
Id Target Id Frame
* 1 LWP 6891 "clone-attach-de" 0x00007f87e5fd0790 in __nanosleep_nocancel () at ../sysdeps/unix/syscall-template.S:84
(gdb) FAIL: gdb.threads/clone-attach-detach.exp: fg attach 1: info threads shows two LWPs
detach
.../src/gdb/thread.c:1010: internal-error: is_executing: Assertion `tp' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
FAIL: gdb.threads/clone-attach-detach.exp: fg attach 1: detach (GDB internal error)
From here:
...
#8 0x00000000007ba7cc in internal_error (file=0x98ea68 ".../src/gdb/thread.c", line=1010, fmt=0x98ea30 "%s: Assertion `%s' failed.")
at .../src/gdb/common/errors.c:55
#9 0x000000000064bb83 in is_executing (ptid=...) at .../src/gdb/thread.c:1010
#10 0x00000000004c23bb in get_pending_status (lp=0x12c5cc0, status=0x7fffffffdc0c) at .../src/gdb/linux-nat.c:1235
#11 0x00000000004c2738 in detach_callback (lp=0x12c5cc0, data=0x0) at .../src/gdb/linux-nat.c:1317
#12 0x00000000004c1a2a in iterate_over_lwps (filter=..., callback=0x4c2599 <detach_callback>, data=0x0) at .../src/gdb/linux-nat.c:899
#13 0x00000000004c295c in linux_nat_detach (ops=0xe7bd30, args=0x0, from_tty=1) at .../src/gdb/linux-nat.c:1358
#14 0x000000000068284d in delegate_detach (self=0xe7bd30, arg1=0x0, arg2=1) at .../src/gdb/target-delegates.c:34
#15 0x0000000000694141 in target_detach (args=0x0, from_tty=1) at .../src/gdb/target.c:2241
#16 0x0000000000630582 in detach_command (args=0x0, from_tty=1) at .../src/gdb/infcmd.c:2975
...
Tested on x86-64 Fedora 23. Also confirmed the test passes against
gdbserver with "maint set target-non-stop".
gdb/ChangeLog:
2016-05-24 Pedro Alves <palves@redhat.com>
PR gdb/19828
* linux-nat.c (attach_proc_task_lwp_callback): Mark the lwp
resumed, and add the thread to GDB's thread list.
testsuite/ChangeLog:
2016-05-24 Pedro Alves <palves@redhat.com>
PR gdb/19828
* gdb.threads/clone-attach-detach.c: New file.
* gdb.threads/clone-attach-detach.exp: New file.
Following, commit
6e774b13c3 Make ftrace tests work with remote targets
the test gdb.threads/dlopen-libpthread.exp started to fail with:
ERROR: error copying "/home/emaisin/build/binutils-gdb/gdb/testsuite/gdb.threads/dlopen-libpthread.so": no such file or directory
This is because the library path is not computed using
standard_output_file, so we try to gdb_load_shlibs an unexisting file.
gdb/testsuite/ChangeLog:
* gdb.threads/dlopen-libpthread.exp: Set binfile_lib using
standard_output_file. Remove unused binfile variable.
This patch addresses "fork:Interrupted system call" (or wait:) failures
in gdb.threads/forking-threads-plus-breakpoint.exp.
The test program spawns ten threads, each of which do ten fork/waitpid
sequences. The cause of the problem was that when one of the fork
children exited before the corresponding fork parent could initiate its
waitpid for that child, a SIGCHLD and/or SIGSTOP was delivered and
interrupted a fork or waitpid in another thread.
The fix was to wrap the system calls in a loop to retry the call if
it was interrupted, like:
do
{
pid = fork ();
}
while (pid == -1 && errno == EINTR);
Since this is a Linux-only test I figure it is OK to use errno and EINTR.
I tried a number of alternative fixes using SIG_IGN, SA_RESTART,
pthread_sigblock, and bsd_signal, but none of these worked as well.
Tested on Nios II Linux target with x86 Linux host.
gdb/testsuite/ChangeLog:
2016-03-16 Don Breazeal <donb@codesourcery.com>
* gdb.threads/forking-threads-plus-breakpoint.c (thread_forks):
Retry fork and waitpid on interrupted system call errors.
* gdb.threads/forking-threads-plus-breakpoint.exp: (do_test):
Use with_timeout_factor to increase timeout to 90.
These tests should have been adjusted by f303dbd60d (Fix PR
threads/19422 - show which thread caused stop), but clearly I had
missed grepping for potential-fail cases.
gdb/testsuite/ChangeLog
2016-03-09 Pedro Alves <palves@redhat.com>
* gdb.threads/attach-into-signal.exp: Adjust to "Program received
signal" -> "Thread NN received signal" output change.
* gdb.threads/ia64-sigill.exp: Likewise.
* gdb.threads/linux-dp.exp: Likewise.
* gdb.threads/manythreads.exp: Likewise.
* gdb.threads/pending-step.exp: Likewise.
* gdb.threads/print-threads.exp: Likewise.
* gdb.threads/sigstep-threads.exp: Likewise.
* gdb.threads/staticthreads.exp: Likewise.
* gdb.threads/tls.exp: Likewise.
This testcase currently fails to compile on Fedora 23:
.../src/gdb/testsuite/gdb.threads/watchpoint-fork-mt.c: In function 'start':
.../src/gdb/testsuite/gdb.threads/watchpoint-fork-mt.c:70:11: warning: implicit declaration of function 'pthread_yield' [-Wimplicit-function-declaration]
i = pthread_yield ();
^
.../src/gdb/testsuite/gdb.threads/watchpoint-fork-child.c: In function 'forkoff':
.../src/gdb/testsuite/gdb.threads/watchpoint-fork-child.c:114:8: warning: implicit declaration of function 'pthread_yield' [-Wimplicit-function-declaratio
n]
i = pthread_yield ();
^
/tmp/ccUkNIsI.o: In function `start':
.../src/gdb/testsuite/gdb.threads/watchpoint-fork-mt.c:70: undefined reference to `pthread_yield'
(...)
collect2: error: ld returned 1 exit status
UNSUPPORTED: gdb.threads/watchpoint-fork.exp: child: multithreaded: Couldn't compile watchpoint-fork-child.c: unrecognized error
UNTESTED: gdb.threads/watchpoint-fork.exp: child: multithreaded: watchpoint-fork.exp
testcase .../src/gdb/testsuite/gdb.threads/watchpoint-fork.exp completed i
The glibc manual says, on _GNU_SOURCE:
"You should define these macros by using ‘#define’ preprocessor
directives at the top of your source code files. These directives must
come before any #include of a system header file."
I instead put it in the header all the .c files of the testcase must
include anyway.
gdb/testsuite/ChangeLog:
2016-03-01 Pedro Alves <palves@redhat.com>
* gdb.threads/watchpoint-fork-child.c: Include "watchpoint-fork.h"
before anything else.
* gdb.threads/watchpoint-fork-mt.c: Likewise. Don't define
_GNU_SOURCE here.
* gdb.threads/watchpoint-fork-st.c: Include "watchpoint-fork.h"
before anything else.
* gdb.threads/watchpoint-fork.h: Define _GNU_SOURCE.
Proc do_test in forking-threads-plus-breakpoint.exp has an argument
cond_bp_target, but the test doesn't use it to set
"breakpoint condition-evaluation", which is an oversight in the test.
This patch fixes it by setting "breakpoint condition-evaluation" per
$cond_bp_target.
gdb/testsuite:
2016-02-18 Yao Qi <yao.qi@linaro.org>
* gdb.threads/forking-threads-plus-breakpoint.exp (do_test):
Set "set breakpoint condition-evaluation" per $cond_bp_target.
This patch fixes an internal error that occurs in
gdb.threads/forking-threads-plus-breakpoint.exp:
/blah/binutils-gdb/gdb/target.c:2723: internal-error: Can't determine the
current address space of thread Thread 3170.3170
In default_thread_address_space, find_inferior_ptid couldn't find 3170.3170
because it had been overwritten in inferior_appeared, called as follows:
inferior_appeared
remote_add_inferior
remote_notice_new_inferior
remote_update_thread_list
The cause of the problem was the following sequence of events:
* GDB knows only about the main thread
* the first fork event is reported to GDB, saved as pending_event
* qXfer:threads:read gets the threads from the remote.
remove_new_fork_children id's the fork child from the pending event
and removes it from the list reported to GDB. All the rest of the
threads, including the fork parent, are added to the GDB thread list.
* GDB stops all the threads. All the stop events are pushed onto the
stop reply queue behind the pending fork event. The fork waitstatus
is saved in the fork parent thread's pending status field
thread_info.suspend.
* remote_wait_ns calls queued_stop_reply and process_stop_reply to
remove the fork event from the front of the stop reply queue and save
event information in the thread_info structure for the fork parent
thread. Unfortunately, none of the information saved in this way is
the fork-specific information.
* A subsequent qXfer:threads:read packet gets the thread list including
the fork parent and fork child. remove_new_fork_children checks the
thread list to see if there is a fork parent, doesn't find one, checks
the stop reply queue for a pending fork event, doesn't find one, and
allows the fork child thread to be reported to GDB before the fork
event has been handled. remote_update_thread_list calls
remote_notice_new_thread and overwrites the current (main) thread in
inferior_appeared.
So the fork event has been reported out of target_wait but it was left
pending on the infrun side (infrun.c:save_waitstatus). IOW, the fork
event hasn't been processed by handle_inferior_event yet, so it hasn't
made it to tp->pending_follow yet.
The fix is to check thread_info.suspend along with the
thread_info.pending_follow in remote.c:remove_new_fork_children, to
prevent premature reporting of the fork child thread creation.
gdb/ChangeLog:
PR remote/19496
* remote.c (remove_new_fork_children): Check for pending
fork status in thread_info.suspend.
gdb/testsuite/ChangeLog:
PR remote/19496
* gdb.threads/forking-threads-plus-breakpoint.exp (do_test):
Remove kfail for PR remote/19496.
When running tests in parallel, each test puts its generated files in a
different directory, under "outputs". I think it would be nice if it
was always the case, as it would isolate the test cases a bit more. An
artifact created by a test wouldn't get overwritten by another test.
Also, it makes it easier to clean up. A lot of executables are left all
over the place because their names do not appear in gdb.*/Makefile. If
everything is in "outputs", then we just have to delete that directory
(which we already do).
At the same time it makes the gdb.foo directories and their Makefiles
useless in the build directory, since they are pretty much only used for
cleaning.
What do you think?
gdb/testsuite/ChangeLog:
* Makefile.in (ALL_SUBDIRS): Remove.
(clean mostlyclean): Do not recurse in ALL_SUBDIRS.
(distclean maintainer-clean realclean): Likewise.
* configure.ac (AC_OUTPUT): Remove gdb.*/Makefile.
* configure: Regenerate.
* gdb.ada/Makefile.in: Delete.
* gdb.arch/Makefile.in: Likewise.
* gdb.asm/Makefile.in: Likewise.
* gdb.base/Makefile.in: Likewise.
* gdb.btrace/Makefile.in: Likewise.
* gdb.cell/Makefile.in: Likewise.
* gdb.compile/Makefile.in: Likewise.
* gdb.cp/Makefile.in: Likewise.
* gdb.disasm/Makefile.in: Likewise.
* gdb.dlang/Makefile.in: Likewise.
* gdb.dwarf2/Makefile.in: Likewise.
* gdb.fortran/Makefile.in: Likewise.
* gdb.gdb/Makefile.in: Likewise.
* gdb.go/Makefile.in: Likewise.
* gdb.guile/Makefile.in: Likewise.
* gdb.java/Makefile.in: Likewise.
* gdb.linespec/Makefile.in: Likewise.
* gdb.mi/Makefile.in: Likewise.
* gdb.modula2/Makefile.in: Likewise.
* gdb.multi/Makefile.in: Likewise.
* gdb.objc/Makefile.in: Likewise.
* gdb.opencl/Makefile.in: Likewise.
* gdb.opt/Makefile.in: Likewise.
* gdb.pascal/Makefile.in: Likewise.
* gdb.perf/Makefile.in: Likewise.
* gdb.python/Makefile.in: Likewise.
* gdb.reverse/Makefile.in: Likewise.
* gdb.server/Makefile.in: Likewise.
* gdb.stabs/Makefile.in: Likewise.
* gdb.threads/Makefile.in: Likewise.
* gdb.trace/Makefile.in: Likewise.
* gdb.xml/Makefile.in: Likewise.
* lib/gdb.exp (make_gdb_parallel_path): Add check for
GDB_PARALLEL.
(standard_output_file): Remove check for GDB_PARALLEL, always
return path in outputs/$subdir/$testname.
This exposes the internal error Don mentioned in PR19496:
(1) internal error -- gdb/target.c:2713: internal-error: Can't determine the current address space of thread
More analysis here:
https://sourceware.org/ml/gdb-patches/2016-01/msg00685.html
The (now kfailed) internal error looks like:
continue &
Continuing.
(gdb) PASS: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=1: detach_on_fork=on: displaced=off: continue &
[New Thread 2846.2847]
(...)
[New Thread 2867.2867]
/home/pedro/gdb/mygit/src/gdb/target.c:2723: internal-error: Can't determine the current address space of thread Thread 2846.2846
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) KFAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=1: detach_on_fork=on: displaced=off: inferior 1 exited (GDB internal error) (PRMS: remote/19496)
Resyncing due to internal error.
gdb/testsuite/ChangeLog:
2016-02-01 Pedro Alves <palves@redhat.com>
PR remote/19496
* gdb.threads/forking-threads-plus-breakpoint.exp
(displaced_stepping_supported): New global.
(probe_displaced_stepping_support): New procedure.
(do_test): Add 'displaced' parameter, and use it.
(top level): Check for displaced stepping support. Add displaced
stepping on/off testing axis.
This commit changes GDB like this:
- Program received signal SIGINT, Interrupt.
+ Thread 1 "main" received signal SIGINT, Interrupt.
- Breakpoint 1 at 0x40087a: file threads.c, line 87.
+ Thread 3 "bar" hit Breakpoint 1 at 0x40087a: file threads.c, line 87.
... once the program goes multi-threaded. Until GDB sees a second
thread spawn, the output is still the same as before, per the
discussion back in 2012:
https://www.sourceware.org/ml/gdb/2012-11/msg00010.html
This helps non-stop mode, where you can't easily tell which thread hit
a breakpoint or received a signal:
(gdb) info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc1740 (LWP 19362) "main" (running)
2 Thread 0x7ffff7fc0700 (LWP 19366) "foo" (running)
3 Thread 0x7ffff77bf700 (LWP 19367) "bar" (running)
(gdb)
Program received signal SIGUSR1, User defined signal 1.
0x0000003616a09237 in pthread_join (threadid=140737353877248, thread_return=0x7fffffffd5b8) at pthread_join.c:92
92 lll_wait_tid (pd->tid);
(gdb) b threads.c:87
Breakpoint 1 at 0x40087a: file threads.c, line 87.
(gdb)
Breakpoint 1, thread_function1 (arg=0x1) at threads.c:87
87 usleep (1); /* Loop increment. */
The best the user can do is run "info threads" and try to figure
things out.
It actually also affects all-stop mode, in case of "handle SIG print
nostop":
...
Program received signal SIGUSR1, User defined signal 1.
Program received signal SIGUSR1, User defined signal 1.
Program received signal SIGUSR1, User defined signal 1.
Program received signal SIGUSR1, User defined signal 1.
...
The above doesn't give any clue that these were different threads
getting the SIGUSR1 signal.
I initially thought of lowercasing "breakpoint" in
"Thread 3 hit Breakpoint 1"
but then after trying it I realized that leaving "Breakpoint"
uppercase helps the eye quickly find the relevant information. It's
also easier to implement not showing anything about threads until the
program goes multi-threaded this way.
Here's a larger example session in non-stop mode:
(gdb) c -a&
Continuing.
(gdb) interrupt -a
(gdb)
Thread 1 "main" stopped.
0x0000003616a09237 in pthread_join (threadid=140737353877248, thread_return=0x7fffffffd5b8) at pthread_join.c:92
92 lll_wait_tid (pd->tid);
Thread 2 "foo" stopped.
0x0000003615ebc6ed in nanosleep () at ../sysdeps/unix/syscall-template.S:81
81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
Thread 3 "bar" stopped.
0x0000003615ebc6ed in nanosleep () at ../sysdeps/unix/syscall-template.S:81
81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
b threads.c:87
Breakpoint 4 at 0x40087a: file threads.c, line 87.
(gdb) b threads.c:67
Breakpoint 5 at 0x400811: file threads.c, line 67.
(gdb) c -a&
Continuing.
(gdb)
Thread 3 "bar" hit Breakpoint 4, thread_function1 (arg=0x1) at threads.c:87
87 usleep (1); /* Loop increment. */
Thread 2 "foo" hit Breakpoint 5, thread_function0 (arg=0x0) at threads.c:68
68 (*myp) ++;
info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc1740 (LWP 31957) "main" (running)
2 Thread 0x7ffff7fc0700 (LWP 31961) "foo" thread_function0 (arg=0x0) at threads.c:68
3 Thread 0x7ffff77bf700 (LWP 31962) "bar" thread_function1 (arg=0x1) at threads.c:87
(gdb) shell kill -SIGINT 31957
(gdb)
Thread 1 "main" received signal SIGINT, Interrupt.
0x0000003616a09237 in pthread_join (threadid=140737353877248, thread_return=0x7fffffffd5b8) at pthread_join.c:92
92 lll_wait_tid (pd->tid);
info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc1740 (LWP 31957) "main" 0x0000003616a09237 in pthread_join (threadid=140737353877248, thread_return=0x7fffffffd5b8) at pthread_join.c:92
2 Thread 0x7ffff7fc0700 (LWP 31961) "foo" thread_function0 (arg=0x0) at threads.c:68
3 Thread 0x7ffff77bf700 (LWP 31962) "bar" thread_function1 (arg=0x1) at threads.c:87
(gdb) t 2
[Switching to thread 2, Thread 0x7ffff7fc0700 (LWP 31961)]
#0 thread_function0 (arg=0x0) at threads.c:68
68 (*myp) ++;
(gdb) catch syscall
Catchpoint 6 (any syscall)
(gdb) c&
Continuing.
(gdb)
Thread 2 "foo" hit Catchpoint 6 (call to syscall nanosleep), 0x0000003615ebc6ed in nanosleep () at ../sysdeps/unix/syscall-template.S:81
81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
I'll work on documentation next if this looks agreeable.
This patch applies on top of the star wildcards thread IDs series:
https://sourceware.org/ml/gdb-patches/2016-01/msg00291.html
For convenience, I've pushed this to the
users/palves/show-which-thread-caused-stop branch.
gdb/doc/ChangeLog:
2016-01-18 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Threads): Mention that GDB displays the ID and name
of the thread that hit a breakpoint or received a signal.
gdb/ChangeLog:
2016-01-18 Pedro Alves <palves@redhat.com>
* NEWS: Mention that GDB now displays the ID and name of the
thread that hit a breakpoint or received a signal.
* break-catch-sig.c (signal_catchpoint_print_it): Use
maybe_print_thread_hit_breakpoint.
* break-catch-syscall.c (print_it_catch_syscall): Likewise.
* break-catch-throw.c (print_it_exception_catchpoint): Likewise.
* breakpoint.c (maybe_print_thread_hit_breakpoint): New function.
(print_it_catch_fork, print_it_catch_vfork, print_it_catch_solib)
(print_it_catch_exec, print_it_ranged_breakpoint)
(print_it_watchpoint, print_it_masked_watchpoint, bkpt_print_it):
Use maybe_print_thread_hit_breakpoint.
* breakpoint.h (maybe_print_thread_hit_breakpoint): Declare.
* gdbthread.h (show_thread_that_caused_stop): Declare.
* infrun.c (print_signal_received_reason): Print which thread
received signal.
* thread.c (show_thread_that_caused_stop): New function.
gdb/testsuite/ChangeLog:
2016-01-18 Pedro Alves <palves@redhat.com>
* gdb.base/async-shell.exp: Adjust expected output.
* gdb.base/dprintf-non-stop.exp: Adjust expected output.
* gdb.base/siginfo-thread.exp: Adjust expected output.
* gdb.base/watchpoint-hw-hit-once.exp: Adjust expected output.
* gdb.java/jnpe.exp: Adjust expected output.
* gdb.threads/clone-new-thread-event.exp: Adjust expected output.
* gdb.threads/continue-pending-status.exp: Adjust expected output.
* gdb.threads/leader-exit.exp: Adjust expected output.
* gdb.threads/manythreads.exp: Adjust expected output.
* gdb.threads/pthreads.exp: Adjust expected output.
* gdb.threads/schedlock.exp: Adjust expected output.
* gdb.threads/siginfo-threads.exp: Adjust expected output.
* gdb.threads/signal-command-multiple-signals-pending.exp: Adjust
expected output.
* gdb.threads/signal-delivered-right-thread.exp: Adjust expected
output.
* gdb.threads/sigthread.exp: Adjust expected output.
* gdb.threads/watchpoint-fork.exp: Adjust expected output.
This commit adds a new $_gthread convenience variable, that is like
$_thread, but holds the current thread's global thread id.
gdb/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* NEWS: Mention $_gthread.
* gdbthread.h (struct thread_info) <global_num>: Mention
$_gthread.
* thread.c (thread_num_make_value_helper): New function.
(thread_id_make_value): Delete.
(thread_id_per_inf_num_make_value, global_thread_id_make_value):
New.
(thread_funcs): Adjust.
(gthread_funcs): New.
(_initialize_thread): Register $_gthread variable.
gdb/testsuite/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* gdb.base/default.exp: Expect $_gthread as well.
* gdb.multi/tids.exp: Test $_gthread.
* gdb.threads/thread-specific.exp: Test $_gthread.
gdb/doc/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Threads): Document the $_gthread convenience
variable.
(Convenience Vars): Likewise.
This commit changes GDB to track thread numbers per-inferior. Then,
if you're debugging multiple inferiors, GDB displays
"inferior-num.thread-num" instead of just "thread-num" whenever it
needs to display a thread:
(gdb) info inferiors
Num Description Executable
1 process 6022 /home/pedro/gdb/tests/threads
* 2 process 6037 /home/pedro/gdb/tests/threads
(gdb) info threads
Id Target Id Frame
1.1 Thread 0x7ffff7fc2740 (LWP 6022) "threads" (running)
1.2 Thread 0x7ffff77c0700 (LWP 6028) "threads" (running)
1.3 Thread 0x7ffff7fc2740 (LWP 6032) "threads" (running)
2.1 Thread 0x7ffff7fc1700 (LWP 6037) "threads" (running)
2.2 Thread 0x7ffff77c0700 (LWP 6038) "threads" (running)
* 2.3 Thread 0x7ffff7fc2740 (LWP 6039) "threads" (running)
(gdb)
...
(gdb) thread 1.1
[Switching to thread 1.1 (Thread 0x7ffff7fc2740 (LWP 8155))]
(gdb)
...
etc.
You can still use "thread NUM", in which case GDB infers you're
referring to thread NUM of the current inferior.
The $_thread convenience var and Python's InferiorThread.num attribute
are remapped to the new per-inferior thread number. It's a backward
compatibility break, but since it only matters when debugging multiple
inferiors, I think it's worth doing.
Because MI thread IDs need to be a single integer, we keep giving
threads a global identifier, _in addition_ to the per-inferior number,
and make MI always refer to the global thread IDs. IOW, nothing
changes from a MI frontend's perspective.
Similarly, since Python's Breakpoint.thread and Guile's
breakpoint-thread/set-breakpoint-thread breakpoint methods need to
work with integers, those are adjusted to work with global thread IDs
too. Follow up patches will provide convenient means to access
threads' global IDs.
To avoid potencially confusing users (which also avoids updating much
of the testsuite), if there's only one inferior and its ID is "1",
IOW, the user hasn't done anything multi-process/inferior related,
then the "INF." part of thread IDs is not shown. E.g,.:
(gdb) info inferiors
Num Description Executable
* 1 process 15275 /home/pedro/gdb/tests/threads
(gdb) info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc1740 (LWP 15275) "threads" main () at threads.c:40
(gdb) add-inferior
Added inferior 2
(gdb) info threads
Id Target Id Frame
* 1.1 Thread 0x7ffff7fc1740 (LWP 15275) "threads" main () at threads.c:40
(gdb)
No regressions on x86_64 Fedora 20.
gdb/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* NEWS: Mention that thread IDs are now per inferior and global
thread IDs.
* Makefile.in (SFILES): Add tid-parse.c.
(COMMON_OBS): Add tid-parse.o.
(HFILES_NO_SRCDIR): Add tid-parse.h.
* ada-tasks.c: Adjust to use ptid_to_global_thread_id.
* breakpoint.c (insert_breakpoint_locations)
(remove_threaded_breakpoints, bpstat_check_breakpoint_conditions)
(print_one_breakpoint_location, set_longjmp_breakpoint)
(check_longjmp_breakpoint_for_call_dummy)
(set_momentary_breakpoint): Adjust to use global IDs.
(find_condition_and_thread, watch_command_1): Use parse_thread_id.
(until_break_command, longjmp_bkpt_dtor)
(breakpoint_re_set_thread, insert_single_step_breakpoint): Adjust
to use global IDs.
* dummy-frame.c (pop_dummy_frame_bpt): Adjust to use
ptid_to_global_thread_id.
* elfread.c (elf_gnu_ifunc_resolver_stop): Likewise.
* gdbthread.h (struct thread_info): Rename field 'num' to
'global_num. Add new fields 'per_inf_num' and 'inf'.
(thread_id_to_pid): Rename thread_id_to_pid to
global_thread_id_to_ptid.
(pid_to_thread_id): Rename to ...
(ptid_to_global_thread_id): ... this.
(valid_thread_id): Rename to ...
(valid_global_thread_id): ... this.
(find_thread_id): Rename to ...
(find_thread_global_id): ... this.
(ALL_THREADS, ALL_THREADS_BY_INFERIOR): Declare.
(print_thread_info): Add comment.
* tid-parse.h: New file.
* tid-parse.c: New file.
* infcmd.c (step_command_fsm_prepare)
(step_command_fsm_should_stop): Adjust to use the global thread
ID.
(until_next_command, until_next_command)
(finish_command_fsm_should_stop): Adjust to use the global thread
ID.
(attach_post_wait): Adjust to check the inferior number too.
* inferior.h (struct inferior) <highest_thread_num>: New field.
* infrun.c (handle_signal_stop)
(insert_exception_resume_breakpoint)
(insert_exception_resume_from_probe): Adjust to use the global
thread ID.
* record-btrace.c (record_btrace_open): Use global thread IDs.
* remote.c (process_initial_stop_replies): Also consider the
inferior number.
* target.c (target_pre_inferior): Clear the inferior's highest
thread num.
* thread.c (clear_thread_inferior_resources): Adjust to use the
global thread ID.
(new_thread): New inferior parameter. Adjust to use it. Set both
the thread's global ID and the thread's per-inferior ID.
(add_thread_silent): Adjust.
(find_thread_global_id): New.
(find_thread_id): Make static. Adjust to rename.
(valid_thread_id): Rename to ...
(valid_global_thread_id): ... this.
(pid_to_thread_id): Rename to ...
(ptid_to_global_thread_id): ... this.
(thread_id_to_pid): Rename to ...
(global_thread_id_to_ptid): ... this. Adjust.
(first_thread_of_process): Adjust.
(do_captured_list_thread_ids): Adjust to use global thread IDs.
(should_print_thread): New function.
(print_thread_info): Rename to ...
(print_thread_info_1): ... this, and add new show_global_ids
parameter. Handle it. Iterate over inferiors.
(print_thread_info): Reimplement as wrapper around
print_thread_info_1.
(show_inferior_qualified_tids): New function.
(print_thread_id): Use it.
(tp_array_compar): Compare inferior numbers too.
(thread_apply_command): Use tid_range_parser.
(do_captured_thread_select): Use parse_thread_id.
(thread_id_make_value): Adjust.
(_initialize_thread): Adjust "info threads" help string.
* varobj.c (struct varobj_root): Update comment.
(varobj_create): Adjust to use global thread IDs.
(value_of_root_1): Adjust to use global_thread_id_to_ptid.
* windows-tdep.c (display_tib): No longer accept an argument.
* cli/cli-utils.c (get_number_trailer): Make extern.
* cli/cli-utils.h (get_number_trailer): Declare.
(get_number_const): Adjust documentation.
* mi/mi-cmd-var.c (mi_cmd_var_update_iter): Adjust to use global
thread IDs.
* mi/mi-interp.c (mi_new_thread, mi_thread_exit)
(mi_on_normal_stop, mi_output_running_pid, mi_on_resume):
* mi/mi-main.c (mi_execute_command, mi_cmd_execute): Likewise.
* guile/scm-breakpoint.c (gdbscm_set_breakpoint_thread_x):
Likewise.
* python/py-breakpoint.c (bppy_set_thread): Likewise.
* python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
* python/py-infthread.c (thpy_get_num): Add comment and return the
per-inferior thread ID.
(thread_object_getset): Update comment of "num".
gdb/testsuite/ChangeLog:
2016-01-07 Pedro Alves <palves@redhat.com>
* gdb.base/break.exp: Adjust to output changes.
* gdb.base/hbreak2.exp: Likewise.
* gdb.base/sepdebug.exp: Likewise.
* gdb.base/watch_thread_num.exp: Likewise.
* gdb.linespec/keywords.exp: Likewise.
* gdb.multi/info-threads.exp: Likewise.
* gdb.threads/thread-find.exp: Likewise.
* gdb.multi/tids.c: New file.
* gdb.multi/tids.exp: New file.
gdb/doc/ChangeLog:
2016-01-07 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Threads): Document per-inferior thread IDs,
qualified thread IDs, global thread IDs and thread ID lists.
(Set Watchpoints, Thread-Specific Breakpoints): Adjust to refer to
thread IDs.
(Convenience Vars): Document the $_thread convenience variable.
(Ada Tasks): Adjust to refer to thread IDs.
(GDB/MI Async Records, GDB/MI Thread Commands, GDB/MI Ada Tasking
Commands, GDB/MI Variable Objects): Update to mention global
thread IDs.
* guile.texi (Breakpoints In Guile)
<breakpoint-thread/set-breakpoint-thread breakpoint>: Mention
global thread IDs instead of thread IDs.
* python.texi (Threads In Python): Adjust documentation of
InferiorThread.num.
(Breakpoint.thread): Mention global thread IDs instead of thread
IDs.
[This reapplies a change that was accidentally reverted with c0ecb95f3d.]
Before:
(gdb) info threads
Id Target Id Frame
3 Thread 0x7ffff77c3700 (LWP 29035) callme () at foo.c:30
2 Thread 0x7ffff7fc4700 (LWP 29034) 0x000000000040087b in child_function_2 (arg=0x0) at foo.c:60
* 1 Thread 0x7ffff7fc5740 (LWP 29030) 0x0000003b37209237 in pthread_join (threadid=140737353893632, thread_return=0x0) at pthread_join.c:92
After:
(gdb) info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc5740 (LWP 29030) 0x0000003b37209237 in pthread_join (threadid=140737353893632, thread_return=0x0) at pthread_join.c:92
2 Thread 0x7ffff7fc4700 (LWP 29034) 0x000000000040087b in child_function_2 (arg=0x0) at foo.c:60
3 Thread 0x7ffff77c3700 (LWP 29035) callme () at foo.c:30
gdb/doc/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* gdb.texinfo (Inferiors and Programs): Adjust "maint info
program-spaces" example to ascending order listing.
(Threads): Adjust "info threads" example to ascending order
listing.
(Forks): Adjust "info inferiors" example to ascending order
listing.
gdb/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* inferior.c (add_inferior_silent): Append the new inferior to the
end of the list.
* progspace.c (add_program_space): Append the new pspace to the
end of the list.
* thread.c (new_thread): Append the new thread to the end of the
list.
gdb/testsuite/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* gdb.base/foll-exec-mode.exp: Adjust to GDB listing inferiors and
threads in ascending order.
* gdb.base/foll-fork.exp: Likewise.
* gdb.base/foll-vfork.exp: Likewise.
* gdb.base/multi-forks.exp: Likewise.
* gdb.mi/mi-nonstop.exp: Likewise.
* gdb.mi/mi-nsintrall.exp: Likewise.
* gdb.multi/base.exp: Likewise.
* gdb.multi/multi-arch.exp: Likewise.
* gdb.python/py-inferior.exp: Likewise.
* gdb.threads/break-while-running.exp: Likewise.
* gdb.threads/execl.exp: Likewise.
* gdb.threads/gcore-thread.exp: Likewise.
* gdb.threads/info-threads-cur-sal.exp: Likewise.
* gdb.threads/kill.exp: Likewise.
* gdb.threads/linux-dp.exp: Likewise.
* gdb.threads/multiple-step-overs.exp: Likewise.
* gdb.threads/next-bp-other-thread.exp: Likewise.
* gdb.threads/step-bg-decr-pc-switch-thread.exp: Likewise.
* gdb.threads/step-over-lands-on-breakpoint.exp: Likewise.
* gdb.threads/step-over-trips-on-watchpoint.exp: Likewise.
* gdb.threads/thread-find.exp: Likewise.
* gdb.threads/tls.exp: Likewise.
* lib/mi-support.exp (mi_reverse_list): Delete.
(mi_check_thread_states): No longer reverse list.
I was getting
gu (print arg0)^M
= 0x7fffffffdafb
"/unsafebuild-x86_64-redhat-linux-gnu/gdb/testsuite.unix.-m64/outputs/gdb.guile/scm-value/scm-"...^M
(gdb) FAIL: gdb.guile/scm-value.exp: verify dereferenced value
python print (arg0)^M
0x7fffffffdafd
"/unsafebuild-x86_64-redhat-linux-gnu/gdb/testsuite.unix.-m64/outputs/gdb.python/py-value/py-v"...^M
(gdb) FAIL: gdb.python/py-value.exp: verify dereferenced value
and also:
(gdb) p argv[0]^M
$2 = 0x7fffffffd832 "/home/jkratoch/redhat/gdb-test-", 'x' <repeats 169
times>...^M
(gdb) FAIL: gdb.guile/scm-value.exp: argv[0] should be available on this
target
gdb/testsuite/ChangeLog
2016-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.guile/scm-value.exp (test_value_in_inferior): Set print elements
and repeats to unlimited.
* gdb.python/py-value.exp: Likewise.
* lib/gdb.exp (gdb_has_argv0): Save and temporarily set print elements
and repeats to unlimited.
This patch removes all special cases for HP-UX, for which support has
been removed earlier, that I found in the testsuite. Note that the hppa
architecture != HP-UX, since other OSes can run on hppa, so I tried to
leave everything that is not HP-UX specific.
Two complete tests were completely HP-UX specific, so I removed them.
I ran the testsuite on Linux x86-64, native and native-gdbserver, and
noticed no regressions.
gdb/testsuite/ChangeLog:
* gdb.asm/asm-source.exp: Remove HP-UX references.
* gdb.base/annota1.exp: Likewise.
* gdb.base/annota3.exp: Likewise.
* gdb.base/attach.exp: Likewise.
* gdb.base/bigcore.exp: Likewise.
* gdb.base/break.exp: Likewise.
* gdb.base/call-ar-st.exp: Likewise.
* gdb.base/callfuncs.exp: Likewise.
* gdb.base/catch-fork-static.exp: Likewise.
* gdb.base/display.exp: Likewise.
* gdb.base/foll-exec-mode.exp: Likewise.
* gdb.base/foll-exec.exp: Likewise.
* gdb.base/foll-fork.exp: Likewise.
* gdb.base/foll-vfork.exp: Likewise.
* gdb.base/funcargs.exp: Likewise.
* gdb.base/hbreak2.exp: Likewise.
* gdb.base/inferior-died.exp: Likewise.
* gdb.base/interrupt.exp: Likewise.
* gdb.base/multi-forks.exp: Likewise.
* gdb.base/nodebug.exp: Likewise.
* gdb.base/sepdebug.exp: Likewise.
* gdb.base/solib1.c: Likewise.
* gdb.base/step-test.exp: Likewise.
* gdb.mi/non-stop.c: Likewise.
* gdb.mi/pthreads.c: Likewise.
* gdb.multi/bkpt-multi-exec.ex: Likewise.
* gdb.threads/pthreads.c: Likewise.
* gdb.threads/staticthreads.exp: Likewise.
* lib/future.exp: Likewise.
* lib/gdb.exp: Likewise.
* gdb.base/so-indr-cl.c: Remove.
* gdb.base/so-indr-cl.exp: Likewise.
* gdb.base/solib.c: Likewise.
* gdb.base/solib.exp: Likewise.
* gdb.base/solib2.c: Likewise.
This patch updates tests for fork and exec events in target remote mode.
In the majority of cases this was a simple matter of removing some code
that disabled the test for target remote. In a few cases the test needed
to be disabled; in those cases the gdb_protocol was checked instead of
using the [is_remote target] etc.
In a couple of cases we needed to use clean_restart, since target remote
doesn't support the run command, and in one case we had to modify an expect
expression to allow for a "multiprocess-style" ptid.
Tested with the patch that implemented target remote mode fork and exec
event support.
gdb/testsuite/ChangeLog:
* gdb.base/execl-update-breakpoints.exp (main): Enable for target
remote.
* gdb.base/foll-exec-mode.exp (main): Disable for target remote.
* gdb.base/foll-exec.exp (main): Enable for target remote.
* gdb.base/foll-fork.exp (main): Likewise.
* gdb.base/foll-vfork.exp (main): Likewise.
* gdb.base/multi-forks.exp (main): Likewise, and use clean_restart.
(proc continue_to_exit_bp_loc): Use clean_restart.
* gdb.base/pie-execl.exp (main): Disable for target remote.
* gdb.base/watch-vfork.exp (main): Enable for target remote.
* gdb.mi/mi-nsthrexec.exp (main): Likewise.
* gdb.threads/execl.exp (main): Likewise.
* gdb.threads/fork-child-threads.exp (main): Likewise.
* gdb.threads/fork-plus-threads.exp (main): Disable for target
remote.
* gdb.threads/fork-thread-pending.exp (main): Enable for target
remote.
* gdb.threads/linux-dp.exp (check_philosopher_stack): Allow
pid.tid style ptids, instead of just tid.
* gdb.threads/thread-execl.exp (main): Enable for target remote.
* gdb.threads/watchpoint-fork.exp (main): Likewise.
* gdb.trace/report.exp (use_collected_data): Allow pid.tid style
ptids, instead of just tid.
Testing with "maint set target-non-stop on" causes regressions in
tests that rely on TARGET_WAITKIND_NO_RESUMED, which isn't modelled on
the RSP. In real all-stop, gdbserver detects the situation and
reporst error to GDB, and so the tests (e.g.,
gdb.threads/no-unwaited-for-left.exp) at fail quickly. But with
"maint set target-non-stop on", GDB instead hangs forever waiting for
a stop reply that never comes, and so the tests take longer to time
out.
This adds a new "N" stop reply packet that maps 1-1 to
TARGET_WAITKIND_NO_RESUMED.
gdb/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
PR 14618
* NEWS (New remote packets): Mention the N stop reply.
* remote.c (remote_protocol_features): Add "no-resumed" entry.
(remote_query_supported): Report no-resumed+ support.
(remote_parse_stop_reply): Handle 'N'.
(process_stop_reply): Handle TARGET_WAITKIND_NO_RESUMED.
(remote_wait_as): Handle 'N' / TARGET_WAITKIND_NO_RESUMED.
(_initialize_remote): Register "set/show remote
no-resumed-stop-reply" commands.
gdb/doc/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
PR 14618
* gdb.texinfo (Stop Reply Packets): Document the N stop reply.
(Remote Configuration): Add the "set/show remote
no-resumed-stop-reply" to the available settings table.
(General Query Packets): Document the "no-resumed" qSupported
feature.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
PR 14618
* linux-low.c (linux_wait_1): If the last resumed thread is gone,
report TARGET_WAITKIND_NO_RESUMED.
* remote-utils.c (prepare_resume_reply): Handle
TARGET_WAITKIND_NO_RESUMED.
* server.c (report_no_resumed): New global.
(handle_query) <qSupported>: Handle "no-resumed+". Report
"no-resumed+" support.
(resume): When the target reports TARGET_WAITKIND_NO_RESUMED, only
return error if the client doesn't support no-resumed events.
(push_stop_notification): New function.
(handle_target_event): Use it. Report TARGET_WAITKIND_NO_RESUMED
events if the client supports them.
gdb/testsuite/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* gdb.threads/no-unwaited-for-left.exp: Remove setup_kfail calls.
I couldn't find a test that verified the thread name functionality, so I
created a new one.
A target board can define gdb,no_thread_names if it doesn't support thread
names and wants to skip the tests that uses them.
This test has been made with Linux in mind. Not all platforms use
pthread_setname_np to set the thread name, but some #ifdefs can be added
later in order to support other platforms.
Tested on x86-64 Ubuntu 14.04, native and remote.
gdb/testsuite/ChangeLog:
* gdb.threads/names.exp: New file.
* gdb.threads/names.c: New file.
* README: Mention gdb,no_thread_names.
Before:
(gdb) info threads
Id Target Id Frame
3 Thread 0x7ffff77c3700 (LWP 29035) callme () at foo.c:30
2 Thread 0x7ffff7fc4700 (LWP 29034) 0x000000000040087b in child_function_2 (arg=0x0) at foo.c:60
* 1 Thread 0x7ffff7fc5740 (LWP 29030) 0x0000003b37209237 in pthread_join (threadid=140737353893632, thread_return=0x0) at pthread_join.c:92
After:
(gdb) info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc5740 (LWP 29030) 0x0000003b37209237 in pthread_join (threadid=140737353893632, thread_return=0x0) at pthread_join.c:92
2 Thread 0x7ffff7fc4700 (LWP 29034) 0x000000000040087b in child_function_2 (arg=0x0) at foo.c:60
3 Thread 0x7ffff77c3700 (LWP 29035) callme () at foo.c:30
gdb/doc/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* gdb.texinfo (Inferiors and Programs): Adjust "maint info
program-spaces" example to ascending order listing.
(Threads): Adjust "info threads" example to ascending order
listing.
(Forks): Adjust "info inferiors" example to ascending order
listing.
gdb/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* inferior.c (add_inferior_silent): Append the new inferior to the
end of the list.
* progspace.c (add_program_space): Append the new pspace to the
end of the list.
* thread.c (new_thread): Append the new thread to the end of the
list.
gdb/testsuite/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* gdb.base/foll-exec-mode.exp: Adjust to GDB listing inferiors and
threads in ascending order.
* gdb.base/foll-fork.exp: Likewise.
* gdb.base/foll-vfork.exp: Likewise.
* gdb.base/multi-forks.exp: Likewise.
* gdb.mi/mi-nonstop.exp: Likewise.
* gdb.mi/mi-nsintrall.exp: Likewise.
* gdb.multi/base.exp: Likewise.
* gdb.multi/multi-arch.exp: Likewise.
* gdb.python/py-inferior.exp: Likewise.
* gdb.threads/break-while-running.exp: Likewise.
* gdb.threads/execl.exp: Likewise.
* gdb.threads/gcore-thread.exp: Likewise.
* gdb.threads/info-threads-cur-sal.exp: Likewise.
* gdb.threads/kill.exp: Likewise.
* gdb.threads/linux-dp.exp: Likewise.
* gdb.threads/multiple-step-overs.exp: Likewise.
* gdb.threads/next-bp-other-thread.exp: Likewise.
* gdb.threads/step-bg-decr-pc-switch-thread.exp: Likewise.
* gdb.threads/step-over-lands-on-breakpoint.exp: Likewise.
* gdb.threads/step-over-trips-on-watchpoint.exp: Likewise.
* gdb.threads/thread-find.exp: Likewise.
* gdb.threads/tls.exp: Likewise.
* lib/mi-support.exp (mi_reverse_list): Delete.
(mi_check_thread_states): No longer reverse list.
Nowadays, test gdb.threads/wp-replication.exp uses a while loop to
repeatedly insert HW watchpoint, resume and check no error message
coming out, in order to count HW watchpoints There are some
drawbacks in this way,
- the loop could be endless. I think this is use to making trouble
to S/390, since we had such comment
# Some targets (like S/390) behave as though supporting
# unlimited hardware watchpoints. In this case we just take a
# safe exit out of the loop.
I hit this today too because a GDB internal error is triggered
on "continue" in the loop, and $done is 0 invariantly, so the loop
can't end.
- the code counting hardware watchpoint is too complicated. We can
use "set breakpoint always-inserted on" to get the result of inserting
HW watchpoint without resuming the inferior. In this way,
watch_count_done and empty_cycle in c file is no longer needed.
In this patch, I change to use "set breakpoint always-inserted on" trick,
and only iterate $NR_THREADS times, to count the HW watchpoint. In this
way, the loop can't be endless, and GDB doesn't need to resume the inferior.
gdb/testsuite:
2015-10-30 Yao Qi <yao.qi@linaro.org>
* gdb.threads/wp-replication.c (watch_count_done): Remove.
(empty_cycle): Remove.
(main): Don't call empty_cycle. Don't use watch_count_done.
* gdb.threads/wp-replication.exp: Don't set breakpoint on
empty_cycle. Rewrite the code counting HW watchpoints.
On software single-step targets that don't support displaced stepping,
threads keep hitting each other's single-step breakpoints, and then
GDB needs to pause all threads to step past those. The end result is
that progress in the main thread will be slower and it may take a bit
longer for the signal to be queued. This patch bumps the timeout on
such targets.
gdb/testsuite/ChangeLog:
2015-09-16 Pedro Alves <palves@redhat.com>
Sandra Loosemore <sandra@codesourcery.com>
* gdb.threads/non-stop-fair-events.c (timeout): New global.
(SECONDS): Redefine.
(main): Call pthread_kill and alarm early.
* gdb.threads/non-stop-fair-events.exp: Probe displaced stepping
support.
(test): If the target can't hardware step and doesn't support
displaced stepping, increase the timeout.
If we enable infrun debug running this test, it quickly fails with a
full expect buffer. That can be simply handled with a couple
exp_continues. As it's annoying to hack this every time we need to
debug the test, this patch adds bits to enable debugging support
easily, with a one-line change.
And then, if any iteration of the test fails, we end up with a long
cascade of time outs. Just bail out when we see the first fail.
gdb/testsuite/
2015-09-16 Pedro Alves <palves@redhat.com>
* gdb.threads/non-stop-fair-events.exp (gdb_test_no_anchor)
(enable_debug): New procedures.
(test): Use them. Bail out if waiting for threads fails.
(top level): Bail out if a test fails.
gdb.threads/non-ldr-exc-3.exp is sometimes failing like this:
[Switching to Thread 6831.6832]
Breakpoint 2, thread_execler (arg=0x0) at /home/pedro/gdb/mygit/build/../src/gdb/testsuite/gdb.threads/non-ldr-exc-3.c:41
41 if (execl (image, image, argv1, NULL) == -1) /* break-here */
PASS: gdb.threads/non-ldr-exc-3.exp: lock-sched=on,non-stop=off: continue to breakpoint
(gdb) set scheduler-locking on
(gdb) FAIL: gdb.threads/non-ldr-exc-3.exp: lock-sched=on,non-stop=off: set scheduler-locking on
The problem is that the gdb_test_multiple is missing the prompt
anchor. The problem was introduced by 2fd33e9448. This reverts the
hunk that introduced the problem, reverting back to
gdb_continue_to_breakpoint.
gdb/testsuite/ChangeLog:
2015-09-15 Pedro Alves <palves@redhat.com>
* gdb.threads/non-ldr-exc-3.exp (do_test): Use
gdb_continue_to_breakpoint instead of gdb_test_multiple.
This patch updates several exec-related tests and some of the library
functions in order to get them running with extended-remote. There were
three changes that were required, as follows:
In gdb.base/foll-exec.exp, use 'clean_start' in place of proc 'zap_session'
to reset the state of the debugger between tests. This sets 'remote
exec-file' to execute the correct binary file in each subsequent test.
In gdb.base/pie-execl.exp, there is an expect statement with an expression
that is used to match output from both gdb and the program under debug.
For the remote target, this had to be split into two expressions, using
$inferior_spawn_id to match the output from the program.
Because I had encountered problems with extended-remote exec events in
non-stop mode in my manual testing, I added non-stop testing to the
non-ldr-exc-[1234].exp tests. In order to set non-stop mode for remote
targets, it is necessary to 'set non-stop on' after gdb has started, but
before it connects to gdbserver. This is done using 'save_vars' to set
non-stop mode in GDBFLAGS, so GDB sets non-stop mode on startup.
gdb/testsuite/ChangeLog:
* gdb.base/foll-exec.c: Add copyright header. Fix
formatting issues.
* gdb.base/foll-exec.exp (zap_session): Delete proc.
(do_exec_tests): Use clean_restart in place of zap_session,
and for test initialization. Fix formatting issues. Use
fail in place of perror.
* gdb.base/pie-execl.exp (main): Use 'inferior_spawn_id' in
an expect statement to match an expression with output from
the program under debug.
* gdb.threads/non-ldr-exc-1.exp (do_test, main): Add
non-stop tests and pass stop mode argument to clean_restart.
Use save_vars to enable non-stop in GDBFLAGS.
* gdb.threads/non-ldr-exc-2.exp: Likewise.
* gdb.threads/non-ldr-exc-3.exp: Likewise.
* gdb.threads/non-ldr-exc-4.exp: Likewise.
2015-09-08 Sandra Loosemore <sandra@codesourcery.com>
gdb/testsuite/
* gdb.threads/hand-call-in-threads.exp: Make sure the thread
command actually switches threads. Give up on remaining
tests if target fails to stop at breakpoint.
On a target that is both always in non-stop mode and can do displaced
stepping (such as native x86_64 GNU/Linux, with "maint set
target-non-stop on"), the step-over-trips-on-watchpoint.exp test
sometimes fails like this:
(gdb) PASS: gdb.threads/step-over-trips-on-watchpoint.exp: no thread-specific bp: step: thread 1
set scheduler-locking off
(gdb) PASS: gdb.threads/step-over-trips-on-watchpoint.exp: no thread-specific bp: step: set scheduler-locking off
step
-[Switching to Thread 0x7ffff7fc0700 (LWP 11782)]
-Hardware watchpoint 4: watch_me
-
-Old value = 0
-New value = 1
-child_function (arg=0x0) at /home/pedro/gdb/mygit/src/gdb/testsuite/gdb.threads/step-over-trips-on-watchpoint.c:39
-39 other = 1; /* set thread-specific breakpoint here */
-(gdb) PASS: gdb.threads/step-over-trips-on-watchpoint.exp: no thread-specific bp: step: step
+wait_threads () at /home/pedro/gdb/mygit/src/gdb/testsuite/gdb.threads/step-over-trips-on-watchpoint.c:49
+49 return 1; /* in wait_threads */
+(gdb) FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: no thread-specific bp: step: step
Note "scheduler-locking" was set off. The problem is that on such
targets, the step-over of thread 2 and the "step" of thread 1 can be
set to run simultaneously (since with displaced stepping the
breakpoint isn't ever removed from the target), and sometimes, the
"step" of thread 1 finishes first, so it'd take another resume to see
the watchpoint trigger. Fix this by replacing the wait_threads
function with a one-line infinite loop that doesn't call any function,
so that the "step" of thread 1 never finishes.
gdb/testsuite/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* gdb.threads/step-over-lands-on-breakpoint.c (wait_threads):
Delete function.
(main): Add alarm. Run an infinite loop instead of calling
wait_threads.
* gdb.threads/step-over-lands-on-breakpoint.exp (do_test): Change
comment.
* gdb.threads/step-over-trips-on-watchpoint.c (wait_threads):
Delete function.
(main): Add alarm. Run an infinite loop instead of calling
wait_threads.
* gdb.threads/step-over-trips-on-watchpoint.exp (do_test): Change
comment.
Jan Kratochvil
Pedro Alves
Yao Qi
Simon Marchi
Joel Brobecker
Luis Machado
Tom Tromey
Andrew Burgess
Don Breazeal
Simon Marchi
Sandra Loosemore
Philippe Waroquiers