Newer BF54x parts feature an updated GPIO block where all the interrupt
handling is split off, so create a new model for the pin interrupts.
This is missing the port forwarding aspects, but at least the register
interface should be there.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
More ASTAT directed fixes, but this time at the dsp32shift insns.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This improves some of the arithmetic shifts to better match the
hardware (especially wrt ASTAT behavior). We hit areas where
the published documentation is thin so we have to rely on tests
run on the hardware to figure out how things should behave.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Now that we keep track of the exact parallel insn slot we're in, we can
make sure that the current insn being decoded is valid for that slot.
This brings us much closer to the hardware in flagging invalid parallel
insn combinations.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Some insns need to know which slot they're in to determine whether they
are valid. So add an enum for each slot, and check that rather than the
overall insn len. This makes tracking things in the code much clearer.
However, this code is functionally the same, so a follow up patch will
leverage this more to properly flag invalid parallel insn combos.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The amod1 helper includes a leading space so it can expand into the empty
string when need be, which means the caller need not add spacing itself.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Parallel insns can only do one 32bit, then two 16bits. So if we see
a 2nd 32bit insn after the first 32bit in a parallel insn, abort.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This fix the build time warning:
warning: format not a string literal, argument types not checked [-Wformat-nonliteral]
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
machs.c: In function 'bfin_model_cpu_init':
machs.c:1657:1: warning: 'bfrom' may be used uninitialized
in this function [-Wuninitialized]
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Fix warning about mixing decls and code by moving auxvt_size decl
down to the scope where it is used.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The current code triggers a warning:
dv-bfin_sic.c: In function 'bfin_sic_finish':
dv-bfin_sic.c:930:41: warning: operation on 'sic-><U78e8>.bf54x.iwr1'
may be undefined [-Wsequence-point]
This points out the IWR2 register was not being setup because of a typo.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The place where these funcs get defined do not include the header that
declares their prototypes. Add that to fix -Wmissing-prototypes:
devices.c:59:1: warning: no previous prototype for 'dv_bfin_mmr_invalid'
devices.c:66:1: warning: no previous prototype for 'dv_bfin_mmr_require'
devices.c:99:1: warning: no previous prototype for 'dv_bfin_mmr_check'
devices.c:159:14: warning: no previous prototype for 'dv_get_bus_num'
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Before POSIX standardized strsignal(), old systems would hide the
prototype unless the normal extension defines were enabled. So use
the AC_USE_SYSTEM_EXTENSIONS helper for that.
Then make sure we include string.h ourselves in nrun.c rather than
relying on implicit includes via other sim headers.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
From: Robin Getz <robin.getz@analog.com>
Overflow with shift operations happens independently of saturation, but
we have the logic merged. Extend the lshift function so that callers
can tell it when to handle each independently, and then do so when it's
needed.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
To make it easier to support ebiu banks at other addresses, move the base to
a runtime parameter rather than structure. Future work will make this more
dynamic, but I'm waiting for more details first.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
We had some workarounds for old linux/mii.h headers, but it breaks with
newer ones. So tweak the checks a bit to work with newer ones. We'll
worry about older systems once someone complains.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Parsing target addresses is hard if not generally useless, so use the new
cb_get_string function to lookup the associated strings as well. Now the
trace output is quickly useful instead of just marginally so.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Lift the code that GDB is using to generate dependencies on the fly and
port it over to the sim. Now people shouldn't have to manually maintain
these in their Makefile's.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Automake likes to dump macros automatically used into the aclocal.m4
file, but the common/aclocal.m4 naming prevents that. So rename it
to the more normal "acinclude.m4" so the aclocal tool can work.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Now that the sourceware tree generally requires autoconf-2.64, update
the sim tree to require that too.
This allows us to drop the long standing SIM_AC_COMMON/common.m4
workaround as autoconf 2.64+ seems to work for me.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The VIT_MAX insns can be used in parallel, so we need to use the store
buffer so we don't clobber the output register before we get a chance
to do a memory store with it.
Reported-by: Kai Iskratsch <kai@stella.at>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Since sim_do_command for many people simply calls sim_args_command, start
a unified version of it. For people who handle their own options, they
could switch to this by using sim_add_option_table instead.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The stat syscalls cannot work without a stat map, so declare one that
matches libgloss for virtual environments.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Now that the Blackfin libgloss code extracts the 2nd result and the
error code from the R1/R2 registers, have the sim fill them up.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The LSHIFT/ASHIFT insns that work with accumulators lacked AV/AVS
handling in the ASTAT register, so add it to match the hardware.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
If we're shifting accumulators, we don't want to touch the V bit in
ASTAT, so add size checks to the ashiftrt/lshiftrt helpers.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The logical shift insn does not sign extend before shifting, so
we shouldn't either.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This too should have been squashed into an earlier change. It covers
a few more cases in the V/VS saturation patch when working with TFU
and FU modes of dsp insns.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
When the shift magnitude exceeds 32 bits, the values rotate around (since
the hardware is actually a barrel shifter). So handle this edge case,
update the corresponding AV bit in ASTAT which was missing previously,
and tweak the AZ setting based on how the hardware behaves.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The shift magnitude is a 5-bit signed value. When it is between 0 and
15, then we do the requested shift, but when it is outside of that, we
have to do the opposite.
That means we flip between lshift and ashiftrt to match the hardware.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This reverts the previous commit and does it right. This change got
lost in the shuffle of patches I have pending.
Basically the logic is to change the 32bit saturation (and then masked
to 16bits) to a proper 16bit saturation.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Some saturation cases with dsp mac insns were not setting the V flag.
So implement that part and split up the logic between the dual macs.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Our handling of the M_IU/M_TFU modes are missing signed saturation when
the MM flag is set, so add it to match the hardware behavior.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
After testing the hardware with all the different dsp flags, the MM flag
triggers sign extension in all modes. So drop the limited use of it, and
the local custom helper that was also extending unsigned values. We also
can see that the flag checks in the mult/mac insns have the same behavior
with sign extending, so add a helper func to keep the logic the same in
both places.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
When using the IH modifier, we need to first saturate the value before
rounding it, and then further saturate it a bit more. This makes the
sim match the hardware behavior with these insns.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
When the accumulator saturates, it needs to be greater than, but not
equal to, the largest unsigned value as this is what the hardware does.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The BF537 family glues a bunch of peripherals into single interrupt lines
that run into the SIC. To model this same behavior in the sim, we need to
use the glue-or device, and in order to use that, we need to tweak things
a bit in the mach code to allow declaring of these new devices.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The machs.c file is the best place for holding cpu-specific details, so
restructure the way the SIC manages its ports to do just that. Now the
SIC's have a standard set of input pins and the different line routing
from peripherals is kept in the device tree only. This better models
the hardware where the SIC doesn't care about the exact peripheral that
is sending it stuff, just which input pin it gets it on.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Now that the common code supports the syscall trace level, change the
Blackfin code from using the event level to the syscall level.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Pull the model data (register addresses/sizes) out of the different model
files and into the machs.h header. The models themselves don't care about
where they're mapped, only the mach code does. This allows us to keep the
model headers from being included in the mach code which can cause issues
with model-specific names colliding. Such as when a newer device model is
created, but with incompatible register names/layouts.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
