If ignoring unresolved symbols, ignore reloc overflows too. If not
ignoring unresolved symbols we will report an error about the symbol
being undefined, making any report about reloc overflow superfluous.
PR18147
* powerpc.cc (Target_powerpc::Relocate::relocate): Don't report
relocation errors for branches to strong undefined symbols.
Now that Input_merge_map has an Output_section_data, we can use it in
implementing find_merge_section and replace the only use of is_merge_section_for
with it.
There are two cases to support, one with an SIB-form (6-byte) LEA,
the other with a 5-byte LEA and a NOP after the call __tls_get_addr.
Gold did not yet support the second case. This patch adds that
support.
gold/
PR gold/18106
* i386.cc (Target_i386::Relocate::tls_gd_to_ie): Fix support for
non-SIB form of lea, with nop after the call.
When calculating the padding necessary to align the end of the relro
segment to a page boundary, gold erroneously ignores the .tdata section
when checking to see if there are any relro sections (so if .tdata
is the only relro section, we fail to align the segment properly),
and erroneously pads the cumulative size of the segment based on
the alignment of .tbss. If there are no relro sections following .tbss,
it then fails to note the padding needed at the end of .tdata.
This patch fixes both problems. is_first_section_relro() will return
true when it sees a .tdata section, and we do not align the cumulative
size until after checking for the .tbss section.
gold/
PR gold/14217
* output.cc (Output_segment::is_first_section_relro): Don't ignore
.tdata section.
(Output_segment::set_section_addresses): Don't align size of relro
segment for .tbss.
Tail optimization of string pools (enabled when linker is run with -O2
or greater) should not be done when the section alignment is greater
than the size of the characters in the strings; otherwise, unaligned
strings may result.
gold/
PR gold/18010
* stringpool.cc (Stringpool_template): Don't optimize if section
alignment is greater than sizeof(char).
This patch fixes INCLUDE directives in script files, so that when
an INCLUDE appears inside a sections block, section commands block,
or memory def block, the contents are parsed in the appropriate
context.
gold/
PR gold/18048
* script-c.h (script_include_directive): Add first_token parameter.
* script.cc (script_include_directive): Add first_token parameter, and
pass it to read_script_file.
* yyscript.y (PARSING_SECTIONS_BLOCK, PARSING_SECTION_CMDS)
(PARSING_MEMORY_DEF): New tokens.
(top): Add new productions for INCLUDE files.
(file_cmd): Replace file_or_sections_cmd with copy of its productions.
Pass PARSING_LINKER_SCRIPT to script_include_directive.
(section_block_cmd): Likewise; pass PARSING_SECTIONS_BLOCK.
(section_cmd): Pass PARSING_SECTION_CMDS.
(file_or_sections_cmd): Remove.
(memory_def): Pass PARSING_MEMORY_DEF.
* testsuite/Makefile.am (memory_test_2): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/memory_test_inc.t: New script file.
* testsuite/memory_test_inc_1.t.src: New script file.
* testsuite/memory_test_inc_2.t.src: New script file.
* testsuite/memory_test_inc_3.t.src: New script file.
This patch adds support for reading compressed debug info in
shared objects. It actually simplifies things, by moving the
support for compressed sections all the way up to the top-level
Object class, eliminating the need for several virtual methods.
gold/
* dwp.cc (Sized_relobj_dwo::do_section_contents): Delete.
(Sized_relobj_dwo::setup): Build compressed section map.
(Sized_relobj_dwo::do_decompressed_section_contents): Delete.
* dynobj.cc (Sized_dynobj::base_read_symbols): Build compressed
section map.
* object.cc (Sized_relobj_file::Sized_relobj_file): Remove
compressed_sections_ field.
(build_compressed_section_map): Take Object instead of
Sized_relobj_file parameter; add decompress_if_needed parameter.
(Sized_relobj_file::do_find_special_sections): Store compressed
section map in parent Object.
(Sized_relobj_file::do_decompressed_section_contents): Move
implementation to Object::decompressed_section_contents.
(Sized_relobj_file::do_discard_decompressed_sections): Move
implementation to Object::discard_decompressed_sections.
* object.h (build_compressed_section_map): Declare.
(Object::Object): Add compressed_sections_ field.
(Object::section_is_compressed): Move implementation here.
(Object::decompressed_section_contents): De-virtualize.
(Object::discard_decompressed_sections): De-virtualize.
(Object::do_section_is_compressed): Delete.
(Object::do_decompressed_section_contents): Delete.
(Object::set_compressed_sections): New method.
(Object::compressed_sections): New method.
(Object::compressed_sections_): New data member.
(Compressed_section_info, Compressed_section_map): Move to top of file.
(Sized_relobj_file::do_section_is_compressed): Delete.
(Sized_relobj_file::do_decompressed_section_contents): Delete.
(Sized_relobj_file::do_discard_decompressed_sections): Delete.
(Sized_relobj_file::compressed_sections_): Move to Object class.
In a previous patch for PR 14675, to fix a problem with
the .eh_frame section when static linking, I added a step to
finalize the .eh_frame section at the end of the first link
pass. This patch caused PR 18152, where a plugin-claimed
object caused a non-claimed object's layout to be deferred
until replacement files were read. The call to
finalize_eh_frame_section() is happening before the layout of
the deferred objects, leading to the internal error in
do_relocate_sections.
This patch moves the finalization of the .eh_frame section to
after deferred objects have been processed.
gold/
PR gold/14675
PR gold/18152
* gold.cc (queue_middle_tasks): Finalize .eh_frame after laying out
deferred objects.
Newer version of GCC pass -z relro to the linker, but incremental linking
does not support relro. This patch adds a check to complain about the
conflict, and changes the testsuite to pass -z norelro to the incremental
tests.
2015-03-11 Cary Coutant <ccoutant@google.com>
gold/
* options.cc (General_options::finalize): Don't allow -z relro
with incremental linking.
* testsuite/Makefile.am (incremental_test): Add -z norelro.
(incremental_test_2): Likewise.
(incremental_test_3): Likewise.
(incremental_test_4): Likewise.
(incremental_test_5): Likewise.
(incremental_test_6): Likewise.
(incremental_copy_test): Likewise.
(incremental_common_test_1): Likewise.
(incremental_comdat_test_1): Likewise.
* testsuite/Makefile.in: Regenerate.
Because the __EH_FRAME_BEGIN__ symbol is provided in an empty .eh_frame
section in crtbeginT.o, if crt1.o has a non-empty .eh_frame section,
we place all optimized .eh_frame sections into the output section ahead
of the __EH_FRAME_BEGIN__ symbol, which breaks EH for statically-linked
binaries.
This patch fixes the problem by delaying the attachment of the optimized
.eh_frame sections to the output section until we see the end marker
section (or to the end of pass 1 if we never see an end marker).
gold/
PR gold/14675
* ehframe.cc (Eh_frame::add_ehframe_input_section): Change return type;
return enum indicating whether .eh_frame section is empty, optimizable,
unrecognized, or an end marker. Adjust explicit instantiations.
* ehframe.h (Eh_frame::Eh_frame_section_disposition): New enum type.
(Eh_frame::add_ehframe_input_section): Change return type.
* gold.cc (queue_middle_tasks): Call Layout::finalize_eh_frame_section.
* layout.cc (Layout::layout_eh_frame): Don't add optimized sections
to the .eh_frame output section until we see the end marker.
(Layout::finalize_eh_frame_section): New.
* layout.h: (Layout::finalize_eh_frame_section): New.
GCC 4.2 complains:
binutils/gold/object.cc:3261: error: using ‘typename’ outside of template
This patch removes typename. It works with both GCC 4.2 and 4.8.
* output.cc (Relobj::initialize_input_to_output_map<size>):
Remove typename on elfcpp::Elf_types<size>::Elf_Addr.
gold/
* parameters.cc (Parameters::set_target_once): Call
Target::select_as_default_target just once from here...
(set_parameters_target): ...instead of from here.
2015-03-02 Rafael Ávila de Espíndola <rafael.espindola@gmail.com>
* ehframe.cc (Cie::set_output_offset): Pass in and use a
Output_section_data instead of a Merge_map.
(Eh_frame::Eh_frame): Don't initialize merge_map_.
(Eh_frame::read_cie): Use add_merge_mapping instead of
Merge_map::add_mapping.
(Eh_frame::read_fde): Ditto.
(Eh_frame::set_final_data_size): Use this instead of this->merge_map_.
(Eh_frame::do_output_offset): Use merge_output_offset istead of
merge_map_->get_output_offset.
(Eh_frame::do_is_merge_section_for): Delete.
* ehframe.h (Fde::add_mapping): Pass in and use a Output_section_data
instead of a Merge_map.
(Cie::set_output_offset): Pass in a Output_section_data instead of a
Merge_map.
(Eh_frame::do_is_merge_section_for): Delete.
(Eh_frame::merge_map_): Delete.
* merge.cc (Object_merge_map::get_or_make_input_merge_map): Pass in
and use a Output_section_data instead of a Merge_map.
(Object_merge_map::add_mapping): Ditto.
(Object_merge_map::get_output_offset): Remove the merge_map argument.
(Object_merge_map::is_merge_section_for): Pass in and use a
Output_section_data instead of a Merge_map.
(Merge_map): Delete.
(Output_merge_base::do_output_offset): Use merge_output_offset instead
of merge_map_.get_output_offset.
(Output_merge_base::do_is_merge_section_for): Delete.
(Output_merge_data::do_add_input_section): Use
object->add_merge_mapping instead of add_mapping.
(Output_merge_string<Char_type>::finalize_merged_data): Ditto.
* merge.h (Merge_map): Delete forward declaration.
(Object_merge_map::add_mapping): Pass in and use a Output_section_data
instead of a Merge_map.
(Object_merge_map::get_output_offset): Remove the merge_map argument.
(Object_merge_map::is_merge_section_for): Pass in and use a
Output_section_data instead of a Merge_map.
(Input_merge_map::Object_merge_map::merge_map): Replace with
output_data.
(Object_merge_map::get_or_make_input_merge_map): Pass in and use a
Output_section_data instead of a Merge_map.
(Merge_map): Delete.
(Output_merge_base::Output_merge_base): Don't initialize merge_map_.
(Output_merge_base::do_is_merge_section_for): Delete.
(Output_merge_base::add_mapping): Delete.
(Output_merge_base::merge_map_): Delete.
* object.cc (Relobj::initialize_input_to_output_map): New.
(Relobj::initialize_input_to_output_map): New.
(Relobj::merge_output_offset): New.
(Relobj::is_merge_section_for): New.
(Relobj::initialize_input_to_output_map): Instantiate for 32 and 64
bits.
* object.h (Relobj::merge_map): Delete.
(initialize_input_to_output_map): New.
(set_merge_map): Delete.
(add_merge_mapping): New.
(merge_output_offset): New.
(is_merge_section_for): New.
* output.cc (Output_section::Input_section::is_merge_section_for):
Use object->is_merge_section_for.
* output.h (Output_section_data::is_merge_section_for): Delete.
(Output_section_data::do_is_merge_section_for): Delete.
* reloc.cc (Merged_symbol_value<size>::initialize_input_to_output_map):
Use object->initialize_input_to_output_map.
(Merged_symbol_value<size>::value_from_output_section): Use
object->merge_output_offset.
2015-02-04 Peter Collingbourne <pcc@google.com>
Cary Coutant <ccoutant@google.com>
gold/
* output.cc (Output_section::add_merge_input_section): Do not
attempt to merge sections with an entsize of 0.
PR 18010
* powerpc.cc (Powerpc_relocate_functions::addr16_ds): Always
complain if value is not a multiple of four.
(Target_powerpc::Relocate::relocate): Correct handling of
R_POWERPC_GOT_TPREL16 and R_POWERPC_GOT_TPREL16_LO for ppc64.
Found when applying relocs in .debug that reference removed functions.
PR 17954
* powerpc.cc (Global_symbol_visitor_opd::operator()): Set default
visibility.
DWARFv5 defines and GCC5 may output two new DW_LANG constants for the
Fortran 2003 and Fortran 2008 standards. Recognize both in gold gdb-index
as unsupported.
For consistency also add the other new DWARF5/GCC5 language constants in
the elfcpp::DW_LANG enum to match include/dwarf2.h.
elfcpp/ChangeLog:
* dwarf.h (enum DW_LANG): Add DW_LANG_C_plus_plus_11,
DW_LANG_C11, DW_LANG_C_plus_plus_14, DW_LANG_Fortran03 and
DW_LANG_Fortran08 from ../include/dwarf2.h.
gold/ChangeLog:
* gdb-index.cc (Gdb_index_info_reader::visit_top_die): Recognize
DW_LANG_Fortran03 and DW_LANG_Fortran08.
In PR 13577, the complaint was that -Bsymbolic was overriding the binding
behavior for symbols listed in the --dynamic-list by setting the DT_SYMBOLIC
tag in the dynamic table. In reading the Gnu ld manual, I decided that
--dynamic-list should be mutually exclusive of -Bsymbolic, and modified
gold so that --dynamic-list would treat symbols listed as preemptible,
and all other symbols as internally bound. I was wrong.
PR 16992 shows that with --dynamic-list (and not -Bsymbolic), a symbol
not listed in the dynamic list is being internally bound within the
shared library, but because it's still in the dynamic symbol table, we
expose it to a COPY relocation, and things go really bad from there.
(I can reproduce the same failure, simply by turning on -Bsymbolic-functions
with the Gnu linker. Even though the symbol is bound internally, it's
still exported to the dynamic symbol table, and is exposed to a COPY
relocation.)
I've backed out part of the fix for PR 13577, and -Bsymbolic (or
-Bsymbolic-functions) can now be used with --dynamic-list, but if the
two are used together, we do not set DT_SYMBOLIC or DF_SYMBOLIC
(this matches Gnu ld behavior). We now treat symbols listed in the
dynamic list as premptible, but we do not automatically treat symbols
not listed there as non-premptible.
gold/
PR gold/13577
PR gold/16992
* layout.cc (Layout::finish_dynamic_section): Don't set DT_SYMBOLIC or
DF_SYMBOLIC if --dynamic-list option is used.
* options.cc (General_options::finalize): --dynamic-list is not
mutually exclusive with -Bsymbolic.
* symtab.h (Symbol::is_preemptible): Don't exclude dynamic symbols not
listed in --dynamic-list.
* testsuite/Makefile.am (dynamic_list_lib2.so): Add
-Bsymbolic-functions.
* testsuite/Makefile.in: Regenerate.
Output an ARM state mapping symbol at the start of the PLT. With the
current code objdump will fail to disassemble the PLT that gold
creates.
gold/ChangeLog:
2015-02-11 Will Newton <will.newton@linaro.org>
PR gold/13321
* arm.cc (Target_arm::make_plt_section): Create an ARM
state mapping symbol at the start of the PLT.
There are
two_file_shared_2_pic_1_test_LDADD = two_file_test_2_pic.o two_file_shared_1.so
There should be two_file_shared_1.so, not two_file_shared_2.so in
two_file_shared_2_pic_1_test_DEPENDENCIES.
* testsuite/Makefile.am (two_file_shared_2_pic_1_test_DEPENDENCIES):
Replace two_file_shared_2.so with two_file_shared_1.so.
* testsuite/Makefile.in: Regenerated.
2015-02-04 Peter Collingbourne <pcc@google.com>
* plugin.cc (Pluginobj::get_symbol_resolution_info): Resolve
forwarding symbols when computing symbol resolution info for plugins.
When an LTO linker plugin claims an external member of a thin archive, gold
does not properly unlock the file and make its file descriptor available for
reuse. This patch fixes the problem by modifying Archive::include_member to
unlock the object file via an RAII class instance, ensuring that it will be
unlocked no matter what path is taken through the function.
gold/
PR gold/15660
* archive.cc (Thin_archive_object_unlocker): New class.
(Archive::include_member): Unlock external members of thin archives.
* testsuite/Makefile.am (plugin_test_1): Rename .syms files.
(plugin_test_2): Likewise.
(plugin_test_3): Likewise.
(plugin_test_4): Likewise.
(plugin_test_5): Likewise.
(plugin_test_6): Likewise.
(plugin_test_7): Likewise.
(plugin_test_8): Likewise.
(plugin_test_9): Likewise.
(plugin_test_10): Likewise.
(plugin_test_11): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/plugin_test.c (claim_file_hook): Check for parallel .syms
file to decide whether to claim file.
(all_symbols_read_hook): Likewise.
* testsuite/plugin_test_1.sh: Adjust expected output.
* testsuite/plugin_test_2.sh: Likewise.
* testsuite/plugin_test_3.sh: Likewise.
* testsuite/plugin_test_6.sh: Likewise.
* testsuite/plugin_test_tls.sh: Likewise.
* testsuite/plugin_test_11.sh: New testcase.
We need to check that the output is executable before assuming that we
can replace the reference with zero.
2015-02-02 Cary Coutant <ccoutant@google.com>
gold/
* x86_64.cc (Target_x86_64::Relocate::relocate_tls): Check for
executable output file.
This is a feature required in chromeos arm development work.
Tested:
1) Built passed all-gold on x86_64 machine
2) Tested with basic gold aarch64 ifunc unittests -
a) global ifunc, statically/non-statically linked
b) local ifunc, statically/non-statically linked
c) global/local, other shared library routine mixed,
statically/non-statically linked
d) arm/thumb mode ifunc
e) linking chrome browser passed
When --warn-unresolved-symbols is used, gold tries to create a dynamic relocation
for it, and gives an internal error if the TLS segment has not already been
created. This patch allows the IE-to-LE optimization for an undefined symbol
when building an executable, which suppresses the dynamic relocation, and
relaxes the requirement to have a TLS segment when applying a relocation for
an undefined symbol.
2015-01-28 Cary Coutant <ccoutant@google.com>
gold/
* x86_64.cc (Target_x86_64::Scan::global): Allow IE-to-LE optimization
for undef TLS symbols.
(Target_x86_64::Relocate::relocate_tls): Likewise.
(Target_x86_64::Relocate::tls_ie_to_le): Likewise.
Found when attempting to build an ELFv2 Linux kernel. We don't
generally need a plt entry for ELFv2 got relocs, only on ifunc, just
like ppc32.
* powerpc.cc (Target_powerpc::Scan::local <got relocs>): Correct
condition for need of ifunc plt entry.
(Target_powerpc::Scan::global <got relocs>): Likewise.
This fixes an issue where a page-aligned data section, combined with -z relro,
could lead to a gap between text and data segments larger than a page, and
we would fail to overlap the segments in the file.
gold/
* layout.cc (Layout::set_segment_offsets): Don't align start of segment
unless alignment is larger than page size.
Missing from 5c294fee
elfcpp/
* arm.h: Add enums for Tag_ABI_FP_number_model and Tag_ABI_VFP_args.
gold/
* arm.cc (Target_arm::do_adjust_elf_header): Provide namespace on
new enums.
(Target_arm::merge_object_attributes, ): Likewise.
*** bfd/ChangeLog ***
2014-12-25 Thomas Preud'homme <thomas.preudhomme@arm.com>
* elf32-arm.c (elf32_arm_merge_eabi_attributes): Handle new
Tag_ABI_VFP_args value and replace hardcoded values by enum
values.
(elf32_arm_post_process_headers): Set e_flags in ELF header
as hard float only when Tag_ABI_VFP_args is 1, using new enum
value AEABI_VFP_args_vfp to check that.
*** binutils/ChangeLog ***
2014-12-25 Thomas Preud'homme <thomas.preudhomme@arm.com>
* readelf.c (arm_attr_tag_ABI_VFP_args): Add "compatible".
*** gdb/ChangeLog ***
2014-12-25 Thomas Preud'homme <thomas.preudhomme@arm.com>
* arm-tdep.c (arm_gdbarch_init): Explicitely handle value 3 of
Tag_ABI_VFP_args. Also replace hardcoded values by enum values
in the switch handling the different values of Tag_ABI_VFP_args.
*** gold/ChangeLog ***
2014-12-25 Thomas Preud'homme <thomas.preudhomme@arm.com>
* arm.cc (Target_arm::do_adjust_elf_header): Set e_flags in ELF
header as hard float only when Tag_ABI_VFP_args is 1, using new
enum value AEABI_VFP_args_vfp to check that.
(Target_arm::merge_object_attributes): Handle new Tag_ABI_VFP_args
value and replace hardcoded values by enum values.
*** include/elf/ChangeLog ***
2014-12-25 Thomas Preud'homme <thomas.preudhomme@arm.com>
* arm.h: New AEABI_FP_number_model_* and AEABI_VFP_args_* enum
values.
*** ld/testsuite/ChangeLog ***
2014-12-25 Thomas Preud'homme <thomas.preudhomme@arm.com>
* ld-arm/attr-merge-2a.s: Add Tag_ABI_VFP_args.
* ld-arm/attr-merge-2b.s: Likewise.
* ld-arm/attr-merge-2.attr: Likewise.
* ld-arm/attr-merge-4a.s: Add Tag_ABI_FP_number_model and
Tag_ABI_VFP_args.
* ld-arm/attr-merge-4b.s: Likewise.
* ld-arm/attr-merge-4.attr: Likewise.
* ld-arm/attr-merge-6a.s: Likewise.
* ld-arm/attr-merge-6b.s: Likewise.
* ld-arm/attr-merge-6.attr: Add Tag_ABI_FP_number_model.
The debug_msg test has 2 implementations of SometimesInlineFunction:
int SometimesInlineFunction(int i) { return i; }
int SometimesInlineFunction(int i) { return i * i; }
and One Definition Rule (ODR) violation detection expects they will be
compiled into functions of different sizes. Hower, on x86, GCC 4.7 and
newer compile them into functions of the same size and ODR violation
detection test fails. This patch changes
int SometimesInlineFunction(int i) { return i; }
to
int SometimesInlineFunction(int i) { return i * i * 3; }
so that it will be compiled into a function of larger size.
PR gold/14608
* testsuite/debug_msg.cc (SometimesInlineFunction): Changed
to "return i * i * 3;".
together.
gold/
* mapfile.cc (Mapfile::print_input_section): Print uncompressed sizes.
(Mapfile::print_output_data): Use current_data_size() to avoid
assert for sections requiring postprocessing; if address is not valid,
print 0.
(Mapfile::print_output_section): Use current_data_size(); print note
that addresses and sizes are before compression.
This patch gives current stub-group-size in error message when stub
is too far away.
* aarch64.cc (Target_aarch64): Add new variable: stub_group_size_.
(AArch64_relocate_functions::maybe_apply_stub): Add new parameter.
Update error message.
(Target_aarch64::do_relax): Use absolute value of option
stub_group_size. Replace local variable with class member
stub_group_size_.
Mixing 64-bit and 32-bit types led to the wrong promotions. Keep
calculation in same type. Also fix a case where PLTREL25 reloc addend
should be ignored.
* Powerpc.cc (Target_powerpc::Branch_info::make_stub): Ignore
addend of PLTREL24 reloc when not generating a plt stub. Make
max_branch_offset an "Address".
(Stub_table::can_read_stub): Make max_branch_offset an "Address".
(Target_powerpc::Relocate::relocate): Likewise.
pr17670 is about an assert triggering on a branch to an undefined
weak symbol, the symbol being undefined due to dropping its comdat
group section. (Well sort of. The symbol is actually defined in
an .opd section which isn't part of the group, but the code section
the opd entry points at is dropped.) So don't assert.
Also, don't make long branch stubs to such symbols, and arrange to
have target-reloc.h code warn when applying relocs that use the sym.
PR 17670
* symtab.cc (Symbol::set_undefined): Remove assertion.
* powerpc.cc (Target_powerpc::symval_for_branch): Don't assert
on symbols defined in discarded sections, instead return false.
Rearrange params, update all callers.
(Target_powerpc::Branch_info::make_stub): Don't make stubs for
branches to syms in discarded sections.
(Global_symbol_visitor_opd::operator()): Set discarded opd syms
undefined and flag as discarded.
(Target_powerpc::Relocate::relocate): Localize variable.
Code stolen from arm.cc.
PR 17566
* powerpc.cc (Target_powerpc::Scan::local): Use add_local_section
when adding dynamic relocations against section symbols.
gold/
* layout.cc (Layout::finish_dynamic_section): When '-z global'
is specified set DF_1_GLOBAL in DT_FLAGS_1 flags.
* options.h (General_options): New -z option (global).
PR gold/17578 notes that gold will print a warning about an executable stack
when the -z execstack option is given, even when there is no --warn_execstack
option. The warning is completely useless and unexpected, since the user
explicitly requested an executable stack, and did not even ask for warnings.
This patch fixes that, and adds an extra warning when --warn_execstack
and -z noexecstack are both given and an input file requires an executable
stack.
gold/
PR gold/17578
* layout.cc (Layout::layout_gnu_stack): Don't warn when -z execstack
is given.
(Layout::create_executable_stack_info): Warn when -z noexecstack is
given but some inputs require executable stack.
Add .debug_gdb_scripts, .debug_gnu_pubnames, .debug_gnu_pubtypes,
and .debug_str_offsets to lists of sections to strip or keep
when stripping debug info.
gold/
* layout.cc (gdb_sections): Keep .debug_gdb_scripts and
.debug_str_offsets; strip .debug_gnu_pubnames and
.debug_gnu_pubtypes.
(lines_only_debug_sections): Strip all four new sections.
(Also included in this patch is a minor typo fix in gold/ChangeLog.)
When linking the following tlsdesc access sequence into an executable with -pie,
adrp x0, :tlsdesc:tls_gd
ldr x1, [x0, #:tlsdesc_lo12:tls_gd]
add x0, x0, :tlsdesc_lo12:tls_gd
.tlsdesccall tls_gd
blr x1
mrs x1, tpidr_el0
add x0, x1, x0
ldr w0, [x0]
current gold-aarch64 backend does tls-desc-gd-to-ie relaxation, into
adrp x0, 1000 <__FRAME_END__+0x720>
ldr x1, [x0,#4064] ;; <=== the target register should be x0
nop
nop
mrs x1, tpidr_el0
add x0, x1, x0
ldr w0, [x0]
This code is wrong. The fix changes ldr target register into x0.
An unusually large number of stubs can result in the default section
group size being too large; sections plus stubs exceed the range of a
branch. Restarting the relaxation pass with a smaller group size can
sometimes help.
* powerpc.cc (struct Stub_table_owner): New.
(Powerpc_relobj): Rename stub_table_ to stub_table_index_, an
unsigned int vector. Update all references.
(powerpc_relobj::set_stub_table): Take an unsigned int param
rather than a Stub_table. Update callers.
(Powerpc_relobj::clear_stub_table): New function.
(Target_powerpc): Add relax_failed_, relax_fail_count_ and
stub_group_size_ vars.
(Target_powerpc::new_stub_table): Delete.
(max_branch_delta): New function, extracted from..
(Target_powerpc::Relocate::relocate): ..here..
(Target_powerpc::Branch_info::make_stub): ..and here. Return
status on whether stub created successfully.
(Stub_control::Stub_control): Add "no_size_errors" param. Move
default sizing to..
(Target_powerpc::do_relax): ..here. Init stub_group_size_ and
reduce on relax failure.
(Target_powerpc::group_sections): Add "no_size_errors" param.
Use stub_group_size_. Set up group info in a temp vector,
before building Stub_table vector. Account for input sections
possibly already converted to relaxed sections.
(Stub_table::init): Delete. Merge into..
(Stub_table::Stub_table): ..here.
(Stub_table::can_reach_stub): New function.
(Stub_table::add_plt_call_entry): Add "from" parameter and
return true iff stub could be reached.
(Stub_table::add_long_branch_entry): Similarly. Add "r_type"
param too.
(Stub_table::clear_stubs): Add "all" param.
It's possible for the section grouping code to decide that the last
section looked at (the first section by address) doesn't fit into a
group. In one case that section is already a group owner and that is
handled correctly. In other cases the section should be put into its
own group. Like this:
* powerpc.cc (Stub_control::set_output_and_owner): New function.
(Target_powerpc::group_sections): Use it.
When --gc-sections is turned on during an LTO link, the .eh_frame sections
from deferred files are processed before those from the replacement files.
As a result, the section end-cap from crtendS.o is placed ahead of
the .eh_frame data from the replacement files. This patch fixes the bug
by skipping the layout of the deferred sections during GC pass 2.
gold/
PR gold/17639
* object.cc (Sized_relobj_file): Initialize is_deferred_layout_.
(Sized_relobj_file::do_layout): Handle deferred sections properly
during GC pass 1. Don't add reloc sections to deferred list twice.
* object.h (Sized_relobj_file::is_deferred_layout): New function.
(Sized_relobj_file::is_deferred_layout_): New data member.
Corrects overflow test for rel14, addr14, rel24, addr24 branch relocs,
and prints an information message to give a hint as to how a branch
that can't reach a stub might be cured.
bfd/
* elf64-ppc.c (group_sections): Init stub14_group_size from
--stub-group-size parameter divided by 1024.
gold/
* powerpc.cc (Stub_control::Stub_control): Init stub14_group_size_
from --stub-group-size parameter divided by 1024.
(Powerpc_relocate_functions::rela, rela_ua): Add fieldsize
template parameter. Update all uses.
(Target_powerpc::Relocate::relocate): Rename has_plt_value to
has_stub_value. Set for long branches. Don't report overflow for
branch to undefined weak symbols. Print info message on
overflowing branch to stub.
Go is multi-threaded, so use thread-safe plt stubs. __go_go doesn't
actually start threads, but is a convenient libgo function with a
reasonably unique name that is called by all Go executables. (Threads
are started by a static function of libgo, runtime_newosproc, called
by a whole lot of global functions, including runtime_starttheworld
and runtime_main.)
bfd/
* elf64-ppc.c (ppc64_elf_size_stubs): Add __go_go to thread_starters.
gold/
* powerpc.cc (Target_powerpc::do_relax): Add __go_go to thread_starters.
* x86_64.cc (Target_x86_64<size>::Scan::global): Don't make PLT
entry for R_X86_64_GOTPLT64.
(Target_x86_64<size>::Relocate::relocate): Update comments for
R_X86_64_GOTPLT64.
The patch does the following things:
-- Add support for ifunc.
-- Enable safe icf
-- Add support for TLSLD relocations
R_AARCH64_TLSLD_ADR_PAGE21,
R_AARCH64_TLSLD_ADD_LO12_NC,
R_AARCH64_TLSLD_MOVW_DTPREL_G1,
R_AARCH64_TLSLD_MOVW_DTPREL_G0_NC.
(R_AARCH64_TLSLD_MOVW_* are used by LLVM.)
-- Add support for TLSLD->TLSLE relaxation.
-- Add support for R_AARCH64_LD_PREL_LO19, R_AARCH64_ADR_PREL_LO21.
-- Fix 2 encoding bugs in AArch64_relocate_functions::update_movnz.
-- Correct TLS relocation properties in gold/aarch64-reloc.def.
-- Update testsuite/icf_safe_so_test.cc, testsuite/icf_safe_test.sh.
gold/
2014-10-29 Han Shen <shenhan@google.com>
Jing Yu <jingyu@google.com>
* aarch64-reloc.def: Add LD_PREL_LO12, ADR_PREL_LO21,
TLSLD_ADR_PAGE21, TLSLD_ADD_LO12_NC, TLSLD_MOVW_DTPREL_G1,
TLSLD_MOVW_DTPREL_G0_NC. Change property of TLS relocations to
Symbol::TLS_REF.
* aarch64.cc (Target_aarch64::do_can_check_for_function_pointers): New
method.
(Target_aarch64::reloc_needs_plt_for_ifunc): New method.
(Target_aarch64::tls_ld_to_le): New method.
(Target_aarch64::aarch64_info): Enable can_icf_inline_merge_sections
for 64bit targets.
(Output_data_plt_aarch64::irelative_rel_): New data member.
(Output_data_plt_aarch64::add_entry): Add irelative entries to plt.
(Output_data_plt_aarch64::add_local_ifunc_entry): New method.
(Output_data_plt_aarch64::add_relocation): New method.
(Output_data_plt_aarch64::do_write): Add gold_assert on got_irelative
offset. Add got_irelative size to got size.
(AArch64_relocate_functions): Typedef AArch64_valtype. Replace long
type string with the new typename.
(AArch64_relocate_functions::update_adr): Replace parameter x with
immed.
(AArch64_relocate_functions::update_movnz): Correct wrong val mask.
(AArch64_relocate_functions::reloc_common): New method.
(AArch64_relocate_funcsions::rela_general): Extract common part out
into reloc_common method.
(AArch64_relocate_functions::rela_general): Likewise.
(AArch64_relocate_functions::pcrela_general): Likewise.
(AArch64_relocate_functions::adr): New method.
(AArch64_relocate_functions::adrp): Calculate immed before calling
update_adr.
(AArch64_relocate_functions::adrp): Likewise.
(AArch64_relocate_functions::movnz): Cast x to SignedW type when
comparing x to 0. Calculate immed from ~x when x < 0.
(Target_aarch64::optimize_tls_reloc): Add new cases for
TLSLD_ADR_PAGE21, TLSLD_ADD_LO12_NC, TLSLD_MOVW_DTPREL_G1,
TLSLD_MOVW_DTPREL_G0_NC.
(Target_aarch64::possible_function_pointer_reloc): Implement this
method.
(Target_aarch64::Scan::local_reloc_may_be_function_pointer): Update
comment.
(Target_aarch64::Scan::local): Add codes to handle STT_GNU_IFUNC
symbol. Add cases for TLSLD_ADR_PAGE21, TLSLD_ADD_LO12_NC,
TLSLD_MOVW_DTPREL_G1, TLSLD_MOVW_DTPREL_G0_NC.
(Target_aarch64::Scan::global): Add codes to handle STT_GNU_IFUNC
symbol. Add cases for TLSLD_ADR_PAGE21, TLSLD_ADD_LO12_NC,
TLSLD_MOVW_DTPREL_G1, TLSLD_MOVW_DTPREL_G0_NC.
(Target_aarch64::make_plt_entry): Call add_entry with two more
parameters.
(Target_aarch64::make_local_ifunc_plt_entry): New method.
(Target_aarch64::Relocate::relocate): Add cases for LD_PREL_LO19,
ADR_PREL_LO21, TLSLD_ADR_PAGE21, TLSLD_ADD_LO12_NC,
TLSLD_MOVW_DTPREL_G1, TLSLD_MOVW_DTPREL_G0_NC.
(Target_aarch64::Relocate::relocate_tls): Add cases for
TLSLD_ADR_PAGE21, TLSLD_ADD_LO12_NC, TLSLD_MOVW_DTPREL_G1,
TLSLD_MOVW_DTPREL_G0_NC.
* testsuite/icf_safe_so_test.cc: Correct test comment.
* testsuite/icf_safe_test.sh: Add AArch64 arch.
In short relaxation is the linker's generation of stubs that fixes the
out-of-range jumps/branches in the original object file.
With this implementation, we are able to link a 456MB aarch64 application.
Tested:
1) Build natively on x86_64 and aarch64 machines.
2) Pass unit tests regarding relaxation.
When --hash-style-both is used, gold currently builds the sysv hash
table first, then the gnu hash table. Building the gnu hash table
renumbers the dynamic symbol table, invalidating the sysv hash
table. This patch reverses the order in which the hash tables are
build so that both hash tables are correct.
gold/
PR gold/13597
* layout.cc (Layout::create_dynamic_symtab): Build gnu-style
hash table before sysv-style hash table.
Gold doesn't handle relocations against the section symbol for a TLS
section correctly. Instead of using the offset of the section relative
to the TLS segment, it uses the address of the actual section. This
patch checks for section symbols for TLS sections, and treats them
the same as TLS symbols.
gold/
PR gold/16773
* object.cc (Sized_relobj_file): Compute value of section symbols
for TLS sections the same as TLS symbols.
The plugin API doesn't provide a way for the claimed file handler to
identify a TLS symbol, so when adding a common TLS symbol, gold
mistakenly places the symbol in the non-TLS commons list, and does
not override it when we see the replacement symbol that is marked
as TLS. Consequently, we allocate the TLS common symbol as a regular
common, and, if it's the only TLS in the program, we'll give an
internal error because we haven't allocated a TLS segment.
This patch fixes the problem by removing an exclusion where common
symbols would not override the placeholder symbols, but checking to
see if the size needs adjusting (the original reason for the exclusion).
Furthermore, we need to avoid putting placeholder symbols in the common
list, and wait until we see a real common symbol with a type we can
trust.
gold/
PR gold/17432
* resolve.cc (Symbol_table::resolve): Override common placeholder
symbols, but adjust sizes.
* symtab.cc (Symbol_table::add_from_object): Don't add placeholder
symbols to common lists.
2014-09-18 Rafael Ávila de Espíndola <rafael.espindola@gmail.com>
* testsuite/Makefile.am (plugin_test_10): New test.
* testsuite/Makefile.in: Regenerate
* testsuite/plugin_common_test_2.c (c1): Align to 8.
* testsuite/plugin_test_10.sh: New file.
gold/ChangeLog:
2014-09-17 Rafael Ávila de Espíndola <rafael.espindola@gmail.com>
* plugin.cc (Sized_pluginobj::do_add_symbols): Ignore isym->size.
* resolve.cc (Symbol_table::resolve): Don't override common symbols
during the replacement phase.
elfcpp/ChangeLog:
2014-09-17 Han Shen <shenhan@google.com>
* aarch64.h (R_AARCH64_TLS_DTPREL64): Switch enum value with ...
(R_AARCH64_TLS_DTPMOD64): ... enum value.
gold/ChangeLog:
2014-09-17 Han Shen <shenhan@google.com>
Jing Yu <jingyu@google.com>
* aarch64-reloc.def: Add TLSGD_ADR_PAGE21, TLSGD_ADD_LO12_NC,
TLSDESC_ADR_PAGE21, TLSDESC_LD64_LO12, TLSDESC_ADD_LO12, TLSDESC_CALL.
* aarch64.cc (Target_aarch64): Add data members
got_irelative_, got_tlsdesc_, rela_irelative_, got_mod_index_offset_,
tlsdesc_reloc_info_, tls_base_symbol_defined_. Initialize them in
constructor.
(Target_aarch64::do_reloc_symbol_index): New method.
(Target_aarch64::do_reloc_addend): New method.
(Target_aarch64::add_tlsdesc_info): New method.
(Target_aarch64::do_dynsym_value): New method.
(Target_aarch64::do_make_data_plt): Add new parameters: got,
got_irelative. Pass them to Output_data_plt_aarch64_standard.
(Target_aarch64::make_data_plt): Add new parameters: got,
got_irelative. Pass them to do_make_data_plt.
(Target_aarch64::Relocate): Add skip_call_tls_get_addr_ variable.
(Target_aarch64::Relocate:tls_gd_to_le): New method.
(Target_aarch64::Relocate:tls_ie_to_le): New method.
(Target_aarch64::Relocate:tls_desc_gd_to_le): New method.
(Target_aarch64::Relocate:tls_desc_gd_to_ie): New method.
(Target_aarch64::got_tlsdesc_section): New method.
(Target_aarch64::make_local_ifunc_plt_entry): New method.
(Target_aarch64::define_tls_base_symbol): New method.
(Target_aarch64::reserve_tlsdesc_entries): New method.
(Target_aarch64::got_mod_index_entry): New method.
(Target_aarch64::rela_tlsdesc_section): New method.
(Target_aarch64::rela_irelative_section): New method.
(Target_aarch64::Tlsdesc_info): New struct.
(Target_aarch64::got_section): Create .got.plt space for IRELATIVE
relocations and tlsdesc relocations.
(Target_aarch64::optimize_tls_reloc): Implement method.
(Output_data_plt_aarch64): Add member variables: tlsdesc_rel_, got_,
got_irelative_, irelative_count_, tlsdesc_got_offset_. Initialize them
in constructor.
(Output_data_plt_aarch64::reserve_tlsdesc_entry): New method.
(Output_data_plt_aarch64::has_tlsdesc_entry): New method.
(Output_data_plt_aarch64::get_tlsdesc_got_offset): New method.
(Output_data_plt_aarch64::get_tlsdesc_plt_offset): New method.
(Output_data_plt_aarch64::rela_tlsdesc): New method.
(Output_data_plt_aarch64::rela_irelative): New method.
(Output_data_plt_aarch64::entry_count): Count IRELATIVE relocations.
(Output_data_plt_aarch64::first_plt_entry_offset): Add const attribute.
(Output_data_plt_aarch64::get_plt_tlsdesc_entry_size): New method.
(Output_data_plt_aarch64::fill_tlsdesc_entry): New method.
(Output_data_plt_aarch64::do_get_plt_tlsdesc_entry_size): New method.
(Output_data_plt_aarch64::do_fill_tlsdesc_entry): New method.
(Output_data_plt_aarch64_standard): New member variables:
plt_tlsdesc_entry_size, tlsdesc_plt_entry.
(Output_data_plt_aarch64_standard::Output_data_plt_aarch64_standard):
New parameter: got, got_irelative.
(Output_data_plt_aarch64_standard::do_get_plt_entry_size): New method.
(Output_data_plt_aarch64_standard::do_fill_tlsdesc_entry): New method.
(Output_data_plt_aarch64::do_write): Replace got_address with
gotplt_address. Add irelative_count_ to count. Write tlsdesc entry.
(AArch64_relocate_functions::update_movnz): New method.
(AArch64_relocate_functions): Correct format.
(AArch64_relocate_functions::movnz): New method.
(Target_aarch64::Scan::local): Correct format. Move r_sym, got to
before the switch. Add new cases to switch.
Check ie_to_le relaxation on tlsie relocations. Add code handling
tlsgd tlsdesc cases.
(Target_aarch64::Scan::global): Move arp to front. Do copy_reloc when
needed. Add new cases to switch. Insert dynamic RELATIVE relocation
when needed. Add code handling tlsgd, tlsie, tlsdesc cases.
Call reloc_name_in_error_message to print unsupported reloc.
(Target_aarch64::make_plt_section): Pass got_ and got_irelative_ to
make_data_plt.
(Target_aarch64::do_finalize_sections): Emit relocs to save COPY
relocs. Fill in some more dynamic tags.
(Target_aarch64::Relocate::relocate): Handle tlsgd, tlsdesc relocs.
Skip call tls_get_addr when tlsgd is relaxed.
(Target_aarch64::Relocate::relocate_tls): Correct format. Add code
handling tlsgd, tlsdesc relocs, and tls gd->le, ie->le, tlsdesc->le,
tlsdesc->ie relaxation.
Target_selector_mips_nacl.
gold/
* mips.cc (Target_mips_nacl): New class.
(Target_selector_mips_nacl): New class.
(target_selector_mips32): Rename from target_selector_mips32be and use
Target_selector_mips_nacl instead of Target_selector_mips.
(target_selector_mips32el): Rename from target_selector_mips32 and use
Target_selector_mips_nacl instead of Target_selector_mips.
(target_selector_mips64): Rename from target_selector_mips64be and use
Target_selector_mips_nacl instead of Target_selector_mips.
(target_selector_mips64el): Rename from target_selector_mips64 and use
Target_selector_mips_nacl instead of Target_selector_mips.
(Target_mips::mips_info): Add const attribute.
When --sort-section=name is used, gold will sort the linker-generated contents
of .eh_frame (after optimization) after the endcap provided by crtendS.o.
This causes two problems: the .eh_frame_hdr section is generated assuming that
the optimized .eh_frame contents will be placed at the very beginning of the
section, and the endcap no longer appears at the end of the section.
This patch fixes the first problem by adjusting FDE offsets to take into account
the actual starting offset within the output section, and fixes the second
problem by sorting linker-generated (Output_section_data) sections based on the
name of the output section.
gold/
PR gold/17005
* ehframe.cc (Fde::write): Add output_offset parameter.
(Cie::write): Likewise.
(Eh_frame::set_final_data_size): Account for offset within output
section.
(Eh_frame::do_sized_write): Likewise.
* ehframe.h (Fde::write): Add output_offset parameter.
(Cie::write): Likewise.
* output.cc (Output_section::Input_section_sort_entry): Remove
section_has_name_; add output_section_name parameter. Use
output section name for non-input sections.
(Output_section::Input_section_sort_entry::section_has_name): Remove.
(Output_section::Input_section_sort_entry::section_has_name_): Remove.
(Output_section::Input_section_sort_compare): Remove logic for
sections without names.
(Output_section::Input_section_sort_init_fini_compare): Likewise.
(Output_section::Input_section_sort_section_prefix_special_ordering_compare):
Likewise.
(Output_section::Input_section_sort_section_name_compare): Likewise.
This enables -
1. static linking hello world
2. limited support for TLSIE and TLSLE
3. limited support for linking shared library, linking executable against shared
library.
gold/ChangeLog
2014-08-29 Han Shen <shenhan@google.com>
Jing Yu <jingyu@google.com>
* aarch64-reloc-property.cc
(AArch64_reloc_property_table::reloc_name_in_error_message): Fix bug in
reference reloc property in the table.
* aarch64-reloc.def: Add TLSLE reloc types and fix some errors in
3 other entries.
* aarch64.cc: (Output_data_got_aarch64::add_static_reloc):
2 new overloaded methods.
(Output_data_got_aarch64::do_write): Add code to write out
static relocs.
(class Output_data_got_aarch64::Static_reloc): New class to wrap
static relocs.
(Output_data_got_aarch64::static_relocs): New vector to
hold static relocs.
(Target_aarch64::TCB_SIZE): New const static memeber.
(Target_aarch64::tcb_size): New method.
(Target_aarch64::Relocate::relocate): Add code handling new reloc types.
(Target_aarch64::Relocate::relocate_tls): New method.
(Target_aarch64::Scan::local): Add code handling new reloc types.
(Target_aarch64::Scan::global): Add code handling new reloc types.
elfcpp/ChangeLog:
2014-08-08 Han Shen <shenhan@google.com>
* aarch64.h (withdrawn): Replaced with R_AARCH64_withdrawn.
2014-08-08 Jing Yu <jingyu@google.com>
Han Shen <shenhan@google.com>
* Makefile.am (HFILES): Add aarch64-reloc-property.h.
(DEFFILES): add aarch64-reloc.def.
(TARGETSOURCES): Add aarch64-reloc-property.cc.
(ALL_TARGETOBJS): Add aarch64-reloc-property.$(OBJEXT).
* Makefile.in: Regenerate.
* aarch64-reloc-property.cc: New file.
* aarch64-reloc-property.h: New file.
* aarch64-reloc.def: New file.
* aarch64.cc: Include aarch64-reloc-property.h. Replace spaces
with tab to make the format consistent.
(Output_data_got_aarch64::symbol_table_): New method.
(Target_aarch64::do_plt_address_for_global): New method.
(Target_aarch64::do_plt_address_for_local): New method.
(Target_aarch64::do_select_as_default_target): New method.
(Target_aarch64::do_make_data_plt): New method.
(Target_aarch64::make_data_plt): New method.
(Output_data_plt_aarch64::has_irelative_section): New method.
(Output_data_plt_aarch64::address_for_global): New method.
(Output_data_plt_aarch64::address_for_local): New method.
(Output_data_plt_aarch64::irelative_rel_): New parameter.
(Output_data_plt_aarch64::add_entry): Implement contents.
(Output_data_plt_aarch64::set_final_data_size): Fix typo.
(Output_data_plt_aarch64::do_write): Remove useless got_base. Set
the got_pov entry to plt0.
(Output_data_plt_aarch64_standard::do_fill_first_plt_entry):
Implement contents.
(Output_data_plt_aarch64_standard::do_fill_plt_entry): Implement.
(AArch64_howto): New struct.
(aarch64_howto[]): New static const array.
(AArch64_relocate_functions): New class.
(Target_aarch64::Scan::get_reference_flags): Remove method.
(Target_aarch64::Scan::local): Implement to support a few relocations.
(Target_aarch64::Scan::global): Implement to support a few relocations.
(Target_aarch64::make_plt_section): Implement contents.
(Target_aarch64::make_plt_entry): Implement contents.
(Target_aarch64::do_finalize_sections): Implement contents.
(Target_aarch64::Relocate::relocate): Implement a few relocations.
(Target_aarch64::relocate_section): Implement contents.
2014-07-21 Sriraman Tallam <tmsriram@google.com>
* object.cc (Relobj::is_section_name_included): Add
".rodata.nptl_version" to not garbage collect this section.
Alan Modra committed a patch to Gnu ld to fix a problem encountered on
PPC where the --defsym option wasn't copying the st_other bits to the
newly-defined symbol.
https://sourceware.org/ml/binutils/2014-07/msg00094.html
Gold has the same problem, and additionally wasn't copying the symbol type.
This patch fixes both problems, by copying the symbol type, visibility, and
the remaining st_other bits to the new symbol for --defsym=sym1=sym2
assignments.
gold/
* expression.cc (struct Expression::Expression_eval_info): Add
new fields type_pointer, vis_pointer, and nonvis_pointer.
(Expression::eval_maybe_dot): Add type_pointer, vis_pointer, and
nonvis_pointer parameters. Adjust all calls.
(Symbol_expression::value): Update type, visibility, and nonvis bits
in caller.
* script.cc (Symbol_assignment::sized_finalize): Update type,
visibility, and remaining st_other bits for new symbol.
* script.h: (Expression::eval_maybe_dot): Add type_pointer,
vis_pointer, and nonvis_pointer parameters.
* symtab.h (Symbol::set_type): New method.
* testsuite/Makefile.am (defsym_test): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/defsym_test.c: New file.
* testsuite/defsym_test.sh: New file.
Initial patch to enable gold aarch64 backend.
This patch is just a skeleton which almost does nothing.
It does not support ILP32 now.
gold/ChangeLog:
* aarch64.cc: New file
* Makefile.am (TARGETSOURCES): Add aarch64.cc
(ALL_TARGETOBJS): Add aarch64.$(OBJEXT)
* Makefile.in: Regenerate.
* configure.tgt: Add entries for aarch64*.
* configure.ac: Likewise.
* configure: Likewise.
elfcpp/ChangeLog:
* aarch64.h: New file. New enums for aarch64-elf64 relocations.
* elfcpp.h (EM_AARCH64, SHT_AARCH64_ATTRIBUTES, PT_AARCH64_ARCHEXT,
PT_AARCH64_UNWIND): New enum constant.
There are legitimate reasons to allow a signed value in a cmpli insn
field, for example to test for a "stw r1,lock@sdarel(r13)" instruction
in user code, a kernel might use
subis r3,r3,STW_R1_0R13@ha # subtract off high part
cmplwi r3,lock@sdarel # is low part accessing lock?
Since the lock@sdarel may take a range of -32768 to 32767,
the allowed range of cmpli immediate must be at least [-32768,65535].
bfd/
* elf32-ppc.c (ppc_elf_relocate_section): Treat field of cmpli
insn as a bitfield; Use complain_overflow_bitfield.
* elf64-ppc.c (ppc64_elf_relocate_section): Likewise.
opcodes/
* ppc-opc.c (UISIGNOPT): Define and use with cmpli.
gas/
* config/tc-ppc.c (ppc_insert_operand): Handle PPC_OPERAND_SIGNOPT
on unsigned fields. Comment on PPC_OPERAND_SIGNOPT signed fields
in 64-bit mode.
gold/
* powerpc.cc (relocate): Treat field of cmpli insn as a bitfield.
When not stripping those sections, there was a bug where gold was incorrectly
adjusting section-relative offsets by the offset of the input section within
the output section. That adjustment was both unnecessary and wrong, causing
gold to miss a number of debug entries that should have been added to
.gdb_index. (With stripping, the adjustment was always 0, so the bug in
dwarf_reader.cc would have been hidden by the change to layout.cc.)
gold/
* dwarf_reader.h (Dwarf_pubnames_table): Remove output_section_offset_.
* dwarf_reader.cc (Dwarf_pubnames_table::read_section): Likewise.
(Dwarf_pubnames_table::read_header): Likewise.
* layout.cc (gdb_fast_lookup_sections): Add .debug_gnu_pubnames and
.debug_gnu_pubtypes.
The goal of this patch is to provide an easy way to make
--disable-werror the default when building binutils, or the parts
of binutils that need to get built when building GDB. In development
mode, we want to continue making -Werror the default with GCC.
But, when making releases, I think we want to make it as easy as
possible for regular users to successfully build from sources.
GDB already has this kind of feature to turn -Werror as well as
the use of the libmcheck library. As GDB Release Manager, I take
advantage of it to turn those off after having cut the branch.
I'd like to be able to do the same for the binutils bits. And
perhaps Tristan will want to do the same for his releases too
(not sure, binutils builders might be a little savvier than GDB
builders).
This patch introduces a new file, called development.sh, which
just sets a variable called $development. In our development branches
(Eg. "master"), it's set to true. But setting it to false would allow
us to change the default behavior of various development-related
features to be turned off; in this case, it turns off the use of
-Werror by default (use --enable-werror to turn it back on).
bfd/ChangeLog:
* development.sh: New file.
* warning.m4 (AM_BINUTILS_WARNINGS): Source bfd/development.sh.
Make -Werror the default with GCC only if DEVELOPMENT is true.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add
$(srcdir)/development.sh.
* Makefile.in, configure: Regenerate.
binutils/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gas/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gold/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): New.
* Makefile.in, configure: Regenerate.
gprof/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
ld/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
opcodes/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gdb/ChangeLog:
* development.sh: Delete.
* Makefile.in (config.status): Adjust dependency on development.sh.
* configure.ac: Adjust development.sh source call.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
* configure.ac: Adjust development.sh source call.
* Makefile.in (config.status): Adjust dependency on development.sh.
* configure: Regenerate.
Tested on x86_64-linux by building two ways: One with DEVELOPMENT
set to true, and one with DEVELOPMENT set to false. In the first
case, I could see the use of -Werror, while it disappeared in
the second case.
Power8 fuses addis,addi and addis,ld sequences when the target of the
addis is the same as the addi/ld. Thus
addis r12,r2,xxx@ha
addi r12,r12,xxx@l / ld r12,xxx@l(r12)
is faster than
addis r11,r2,xxx@ha
addi r12,r11,xxx@l / ld r12,xxx@l(r11)
So use the form that allows fusion in plt call and branch stubs.
bfd/
* elf64-ppc.c (ADDIS_R12_R2): Define.
(build_plt_stub): Support fusion on ELFv2 stub.
(ppc_build_one_stub): Likewise for plt branch stubs.
gold/
* powerpc.cc (addis_12_2): Define.
(Stub_table::do_write): Support fusion on ELFv2 stubs.
ld/testsuite/
* ld-powerpc/elfv2exe.d: Update for changed plt call stubs.
gdb/
* ppc64-tdep.c (ppc64_standard_linkage8): New.
(ppc64_skip_trampoline_code): Recognise ELFv2 stub supporting fusion.
readelf output for ELFv2 includes st_other bits specifying a
function's local entry offset.
* testsuite/plugin_test.c (parse_readelf_line): Skip non-visibility
st_other output.
ELFv2 doesn't use .opd, so folding function code can't be allowed
in safe mode if a function's address might be taken.
* powerpc.cc (Target_powerpc::local_reloc_may_be_function_pointer):
Only ignore relocs on ELFv1.
(Target_powerpc::global_reloc_may_be_function_pointer): Likewise.
check script to look for the right binding.
gold/
* testsuite/Makefile.am (ehdr_start_test_4): Fix typo in -B option.
* testsuite/Makefile.in: Regenerate.
* testsuite/ehdr_start_test_4.sh: Look for "U" instead of "w".
This patch fixes 2 issues:
1. Since the GOT offset is always negative, we need to use signed int
to support 64-bit GOT relocations.
2. R_X86_64_PLTOFF64 uses the address of GLOBAL_OFFSET_TABLE, which is
the address of the .got.plt section, not the .got section.
When linking statically, it's possible to hit this warning with IFUNC
or very large executables, due to .glink being unused.
* powerpc.cc (do_plt_fde_location): Handle zero length .glink.
Compare FDE contents with DW_CFA_nop rather than 0.
to access a global as it expects a GOTPCREL relocation. This is really not
necessary as the linker could use a copy relocation to get around it. This
patch enables copy relocations with pie.
Context:
This is useful because currently the GCC compiler with option -fpie makes
every extern global access go through the GOT. That is because the compiler
cannot tell if a global will end up being defined in the executable or not
and is conservative. This ends up hurting performance when the binary is linked
as mostly static where most of the globals do end up being defined in the
executable. By allowing copy relocs with fPIE, the compiler need not generate
a GOTPCREL(GOT access) for any global access. It can safely assume that all
globals will be defined in the executable and generate a PC-relative access
instead. Gold can then create a copy reloc for only the undefined globals.
gold/
* symtab.h (may_need_copy_reloc): Remove check for position independent
code.
* x86_64.cc (Target_x86_64<size>::Scan::global): Add check for no
position independence before pc absolute may_need_copy_reloc call.
Add check for executable output befor pc relative may_need_copy_reloc
call.
* i386.cc: Ditto.
* arm.cc: Ditto.
* sparc.cc: Ditto.
* tilegx.cc: Ditto.
* powerpc.cc: Add check for no position independence before
may_need_copy_reloc calls.
* testsuite/pie_copyrelocs_test.cc: New file.
* testsuite/pie_copyrelocs_shared_test.cc: New file.
* Makefile.am (pie_copyrelocs_test): New test.
* Makefile.in: Regenerate.
With -pie and x86, the linker complains if it sees a PC-relative relocation
to access a global as it expects a GOTPCREL relocation. This is really not
necessary as the linker could use a copy relocation to get around it. This
patch enables copy relocations with pie.
Context:
This is useful because currently the GCC compiler with option -fpie makes
every extern global access go through the GOT. That is because the compiler
cannot tell if a global will end up being defined in the executable or not
and is conservative. This ends up hurting performance when the binary is linked
as mostly static where most of the globals do end up being defined in the
executable. By allowing copy relocs with fPIE, the compiler need not generate
a GOTPCREL(GOT access) for any global access. It can safely assume that all
globals will be defined in the executable and generate a PC-relative access
instead. Gold can then create a copy reloc for only the undefined globals.
is no PLT.
gold/
PR gold/16900
* i386.cc (Output_data_got_plt_i386): New class.
(Output_data_plt_i386::Output_data_plt_i386): Change type of got_plt
parameter. Change all callers.
(Output_data_plt_i386::layout_): Remove.
(Output_data_plt_i386::got_plt_): Change type.
(Target_i386::got_plt_): Change type. Change all references.
(Target_i386::got_section): Create instance of new class.
(Output_data_got_plt_i386::do_write): New function.
* x86_64.cc (Output_data_got_plt_x86_64): New class.
(Output_data_plt_x86_64::Output_data_plt_x86_64): Change type of got_plt
parameter. Change all callers.
(Output_data_plt_x86_64::layout_): Remove.
(Output_data_plt_x86_64::got_plt_): Change type.
(Target_x86_64::got_plt_): Change type. Change all references.
(Target_x86_64::got_section): Create instance of new class.
(Output_data_got_plt_x86_64::do_write): New function.
(Output_data_plt_x86_64::do_write): Don't write reserved words in GOT.
(Target_x86_64<size>::init_got_plt_for_update): Create instance of new
class.
2014-04-15 Sasa Stankovic <Sasa.Stankovic@imgtec.com>
gold/
* layout.cc (Layout::include_section): Allow a target to decide
whether to include a section.
* target.h (Target::should_include_section): New function.
(Target::do_should_include_section): New function.
2014-04-15 Sasa Stankovic <Sasa.Stankovic@imgtec.com>
gold/
* copy-relocs.cc (Copy_relocs::Copy_reloc_entry::emit): Remove and
inline into ...
(Copy_relocs::emit): ... here.
* copy-relocs.h (Copy_reloc_entry): Change from class to struct.
(Copy_reloc_entry::make_copy_reloc): Change from private to protected.
(Copy_reloc_entry::entries_): Change from private to protected.
GCC 4.8 now adds linker plugin options by default, which conflict with the
--incremental tests in the testsuite. This patch checks whether the compiler
supports the -fno-use-linker-plugin option, and adds it to all link
commands.
2014-04-02 Cary Coutant <ccoutant@google.com>
* configure.ac (HAVE_PUBNAMES): Use C instead of C++.
(HAVE_NO_USE_LINKER_PLUGIN): Check for -fno-use-linker-plugin.
* configure: Regenerate.
* testsuite/Makefile.am (OPT_NO_PLUGINS): New macro for
-fno-use-linker-plugin.
(LINK1, CXXLINK1): Add it to the link command.
* testsuite/Makefile.in: Regenerate.
2014-03-10 Sasa Stankovic <Sasa.Stankovic@imgtec.com>
gold/
* symtab.cc (Symbol_table::sized_write_globals): Allow a target to
adjust dynamic symbol value.
* target.h (Target::adjust_dyn_symbol): New function.
(Target::do_adjust_dyn_symbol): New function.
2014-03-10 Sasa Stankovic <Sasa.Stankovic@imgtec.com>
gold/
* output.cc (Output_data_dynamic::Dynamic_entry::write):
Get the value of DYNAMIC_CUSTOM dynamic entry.
* output.h (Output_data_dynamic::add_custom): New function.
(Dynamic_entry::Dynamic_entry): New constructor for DYNAMIC_CUSTOM
dynamic entry.
(enum Dynamic_entry::Classification): Add DYNAMIC_CUSTOM.
* target.h (Target::dynamic_tag_custom_value): New function.
(Target::do_dynamic_tag_custom_value): New function.
2014-03-10 Sasa Stankovic <Sasa.Stankovic@imgtec.com>
gold/
* symtab.cc (Symbol_table::set_dynsym_indexes): Allow a target to set
dynsym indexes.
* target.h (Target::has_custom_set_dynsym_indexes): New function.
(Target::do_has_custom_set_dynsym_indexes): New function.
(Target::set_dynsym_indexes): New function.
(Target::do_set_dynsym_indexes): New function.
R_PPC64_ADDR16 is used in three contexts:
- .short data relocation
- 16-bit signed insn fields, eg. addi
- 16-bit unsigned insn fields, eg. ori
In the first case we want to allow both signed and unsigned 16-bit
values, the latter two ought to error if the field exceeds the range
of values allowed for 16-bit signed and unsigned integers
respectively. These conflicting requirements meant that ld had to
choose the least restrictive overflow checks, and thus it is possible
to construct testcases where an addi field overflows but is not
reported by ld. Many relocations dealing with 16-bit insn fields have
this problem. What's more, some relocations that are only ever used
for signed fields of instructions woodenly copied the lax overflow
checking of R_PPC64_ADDR16.
bfd/
* elf64-ppc.c (ppc64_elf_howto_raw): Use complain_overflow_signed
for R_PPC64_ADDR14, R_PPC64_ADDR14_BRTAKEN, R_PPC64_ADDR14_BRNTAKEN,
R_PPC64_SECTOFF, R_PPC64_ADDR16_DS, R_PPC64_SECTOFF_DS,
R_PPC64_REL16 entries. Use complain_overflow_dont for R_PPC64_TOC.
(ppc64_elf_relocate_section): Modify overflow test for 16-bit
fields in instructions to signed/unsigned according to whether
the field takes a signed or unsigned value.
gold/
* powerpc.cc (Powerpc_relocate_functions::Overflow_check): Add
CHECK_UNSIGNED, CHECK_LOW_INSN, CHECK_HIGH_INSN.
(Powerpc_relocate_functions::has_overflow_unsigned): New function.
(Powerpc_relocate_functions::has_overflow_bitfield,
overflowed): Use the above.
(Target_powerpc::Relocate::relocate): Correct overflow checking
for a number of relocations. Modify overflow test for 16-bit
fields in instructions to signed/unsigned according to whether
the field takes a signed or unsigned value.
This adds support for "func@localentry", an expression that returns the
ELFv2 local entry point address of function "func". I've excluded
dynamic relocation support because that obviously would require glibc
changes.
include/elf/
* ppc64.h (R_PPC64_REL24_NOTOC, R_PPC64_ADDR64_LOCAL): Define.
bfd/
* elf64-ppc.c (ppc64_elf_howto_raw): Add R_PPC64_ADDR64_LOCAL entry.
(ppc64_elf_reloc_type_lookup): Support R_PPC64_ADDR64_LOCAL.
(ppc64_elf_check_relocs): Likewise.
(ppc64_elf_relocate_section): Likewise.
* Add BFD_RELOC_PPC64_ADDR64_LOCAL.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
gas/
* config/tc-ppc.c (ppc_elf_suffix): Support @localentry.
(md_apply_fix): Support R_PPC64_ADDR64_LOCAL.
ld/testsuite/
* ld-powerpc/elfv2-2a.s, ld-powerpc/elfv2-2b.s: New files.
* ld-powerpc/elfv2-2exe.d, ld-powerpc/elfv2-2so.d: New files.
* ld-powerpc/powerpc.exp: Run new test.
elfcpp/
* powerpc.h (R_PPC64_REL24_NOTOC, R_PPC64_ADDR64_LOCAL): Define.
gold/
* powerpc.cc (Target_powerpc::Scan::local, global): Support
R_PPC64_ADDR64_LOCAL.
(Target_powerpc::Relocate::relocate): Likewise.
When the linker has a weak undefined symbol, it normally does not
select an archive library member just to satisfy the reference.
If the same symbol is also listed in a -u option, however, we
should select the archive library member. This patch reorders
the code in Library_base::should_include_member so that the
additional checks are performed in the case of a weak undef.
gold/
2014-02-06 Cary Coutant <ccoutant@google.com>
* archive.cc (Library_base::should_include_member): Reorder
code to check for -u option if a weak undef has already been seen.
* testsuite/Makefile.am (weak_undef_test_2): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/weak_undef_file3.cc: New file.
* testsuite/weak_undef_file4.cc: New file.
* testsuite/weak_undef_test_2.cc: New file.
PR binutils/15435 complains that gold issues a visibility error for an
weak undefined symbol with hidden visibility. The message should be
suppressed if the symbol is a weak undef.
An earlier patch to add an extra note about key functions when a class's
vtable symbol is undefined missed a case where the reference to the
vtable came from a shared library. This patch moves the check to a
lower-level routine that catches both cases.
gold/
2014-02-05 Cary Coutant <ccoutant@google.com>
* errors.cc (Errors::undefined_symbol): Move undef vtable symbol
check to here.
* target-reloc.h (is_strong_undefined): New function.
(relocate_section): Move undef vtable symbol check from here.
Check for is_strong_undefined.
PR gold/13577 complains that even though symbols listed in
the --dynamic-list script are exported, they are still bound symbolically
if -Bsymbolic is also used. There are two underlying problems here.
First, -Bsymbolic should be overridden by --dynamic-list, since the
dynamic list provides an explicit list of symbols that are not bound
within the library, and if we go ahead and set DT_SYMBOLIC, then the
dynamic loader will bind it within the library anyway. Second, gold
did not properly identify the symbols listed in the file as preemptible.
PR gold/16530 complains that symbols listed in the --dynamic-list script
can still be garbage collected. I've fixed this by checking the symbols
as they're added to the symbol table. (Unlike the --export-dynamic-symbol
option, we can't iterate over the list, because the --dynamic-list script
can have wildcards in it.)
gold/
2014-02-05 Cary Coutant <ccoutant@google.com>
PR gold/13577
* options.cc (General_options::parse_dynamic_list):
Set have_dynamic_list_.
(General_options::General_options): Initialize have_dynamic_list_.
(General_options::finalize): Turn off -Bsymbolic and
-Bsymbolic-functions if --dynamic-list provided.
* options.h (General_options::have_dynamic_list): New function.
(General_options::have_dynamic_list_): New data member.
* symtab.h (Symbol::is_preemptible): Handle --dynamic-list
correctly.
PR gold/16530
* symtab.cc (Symbol_table::add_from_relobj): If symbol is named
in --dynamic-list, mark it.
* testsuite/Makefile.am (gc_dynamic_list_test.sh): New test case.
(dynamic_list_2): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/dynamic_list_2.cc: New file.
* testsuite/dynamic_list_2.t: New file.
* testsuite/dynamic_list_lib1.cc: New file.
* testsuite/dynamic_list_lib2.cc: New file.
* testsuite/gc_dynamic_list_test.c: New file.
* testsuite/gc_dynamic_list_test.sh: New file.
* testsuite/gc_dynamic_list_test.t: New file.
This patch adds support for .gdb_index version 7, which adds several
flag bits to the symbol index. It also fixes a problem where it did
not handle compressed debug sections correctly.
Tested with a google/gcc-4_8 branch compiler, which supports
the -ggnu-pubnames option to generate .debug_gnu_pubnames/pubtypes
tables. (We will submit that patch to GCC when stage 1 reopens.)
2014-01-28 Cary Coutant <ccoutant@google.com>
* gold/dwarf_reader.cc: include <utility> (for make_pair).
(Dwarf_abbrev_table::do_read_abbrevs): Check for compressed
debug sections.
(Dwarf_ranges_table::read_ranges_table): Likewise.
(Dwarf_pubnames_table::read_section): Check for GNU-style
sections, and for compressed debug sections.
(Dwarf_pubnames_table::read_header): Compute end address of table.
(Dwarf_pubnames_table::next_name): Return flag_byte. Check
for end of list by offset, not by offset == 0.
(Dwarf_info_reader::do_read_string_table): Check for compressed
debug sections.
* gold/dwarf_reader.h (Dwarf_pubnames_table::Dwarf_pubnames_table):
Initialize new data members.
(Dwarf_pubnames_table::next_name): return flag_byte.
(Dwarf_pubnames_table::end_of_table_): New data member.
(Dwarf_pubnames_table::is_gnu_style_): New data member.
* gold/gdb-index.cc (gdb_index_version): Update to version 7.
(Gdb_index_info_reader::read_pubtable): Read flag_byte.
(Gdb_index_info_reader::read_pubnames_and_pubtypes): Don't
read skeleton type unit DIEs.
(Gdb_index::add_symbol): Add flag_byte; adjust all callers.
(Gdb_index::do_write): Write flag_byte.
* gold/gdb-index.h (Gdb_index::add_symbol): Add flags parameter.
(Gdb_index::Cu_vector): Store flags along with cu indexes.
* gold/testsuite/gdb_index_test_3.sh: Allow versions 4-7.
* gold/testsuite/gdb_index_test_comm.sh: Likewise.
binutils/
* version.c (print_version): Update copyright year to 2014.
gas/
* as.c (parse_args): Update copyright year to 2014.
gold/
* version.cc (print_version): Update copyright year to 2014.
ld/
* ldver.c (ldversion): Update copyright year to 2014.
opcodes/
* i386-gen.c (process_copyright): Update copyright year to 2014.
gold/
* configure.ac: Check for <unordered_set> and <unordered_map>.
* config.in: Regenerate.
* configure: Regenerate.
* system.h: Use <unordered_set> and <unordered_map> if available.
* powerpc.cc (Target_powerpc::glink_section): Provide non-const
accessor.
(Target_powerpc::Branch_info::make_stub): Make global entry stubs.
Only call ppc64_local_entry_offset for 64-bit. Restrict
symval_for_branch lookup to ELFv1.
(Stub_table::add_plt_call_entry): Use unsigned int off.
(Output_data_glink::Address, invalid_address): New.
(Output_data_glink::add_eh_frame): Move out of line. Add
support for ELFv2.
(Output_data_glink::add_global_entry, find_global_entry,
global_entry_address): New functions.
(Output_data_glink::global_entry_stubs_, end_branch_table_,
ge_size): New variables.
(Output_data_glink::set_final_data_size): Add global entry
stub sizing.
(Output_data_glink::do_write): Write global entry stubs.
(Target_powerpc::Scan::reloc_needs_plt_for_ifunc): Add target
parameter. Return true for ELFv2. Adjust callers.
(Target_powerpc::Scan::local, global): Restrict opd lookup to
ELFv1. Similarly for ifunc and dynamic relocation processing
specific to ELFv1. Recognize that symbols are defined on
their plt entries for ELFv2.
(Target_powerpc::symval_for_branch): Assert if called for
ELFv2 or ppc32.
(Target_powerpc::Relocate::relocate): Use global entry plt
stub for symbol value if such exists on ELFv2.
(Target_powerpc::Relocate::relocate): Don't call
symval_for_branch when ELFv2. Do adjust for local entry
offset when ELFv2.
(Target_powerpc::do_dynsym_value): Set symbols to global entry
plt stub for ELFv2.
(Target_powerpc::do_plt_address_for_global): Similarly.
gold/
PR gold/14860
* ehframe.cc (Eh_frame_hdr::Eh_frame_hdr): Initialize lock_.
(Ehframe_hdr::set_final_data_size): Allocate a Lock.
* ehframe.h (Eh_frame_hdr::record_fde): Hold the lock while
updating fde_offsets_.
(Eh_frame_hdr::lock_): New data member.
This adds an extra flag for needs_dynamic_reloc() in order to remove
the copy of this function and use_plt_offset() in powerpc.cc, and
tweaks the powerpc get_reference_flags() to return the flag as
appropriate. ELFv2 does not want ELFv1 behaviour here.
* symtab.h (Symbol::Reference_flags): Add FUNC_DESC_ABI.
(Symbol::needs_dynamic_reloc): Test new flag.
* powerpc.cc (needs_dynamic_reloc, use_plt_offset): Delete.
(Target_powerpc::Scan::get_reference_flags): Add target param.
Return FUNC_DESC_ABI for 64-bit ELFv1.
(Target_powerpc::Branch_info::make_stub): Adjust get_reference_flags
call.
(Target_powerpc::Scan::global): Use Symbol::needs_dynamic_reloc.
(Target_powerpc::Relocate::relocate): Use Symbol::use_plt_offset.
gold/
* dwarf_reader.cc (Dwarf_info_reader::visit_type_unit): Add
tu_length parameter. Adjust all callers.
* dwarf_reader.h (Dwarf_info_reader::visit_type_unit): Likewise.
* dwp.cc: Include dwarf.h.
(Section_bounds): New struct type.
(Unit_set): New struct type.
(Dwo_file::Dwo_file): Initialize new data member.
(Dwo_file::read_compunit_index, Dwo_file::read_typeunit_index):
Combine and rename to...
(Dwo_file::read_unit_index): ...this.
(Dwo_file::sized_read_compunit_index)
(Dwo_file::sized_read_typeunit_index): Combine and rename to...
(Dwo_file::sized_read_unit_index): ...this.
(Dwo_file::copy_section): Remove section_name, is_str_offsets
parameters; add section_id parameter.
(Dwo_file::add_cu_set, Dwo_file::add_tu_set): Combine and rename to...
(Dwo_file::add_unit_set): ...this.
(Dwo_file::shndx_map_): Remove.
(Dwo_file::sect_offsets_): New data member.
(Dwp_output_file::Dwp_output_file): Initialize new data members.
(Dwp_output_file::add_section): Rename to...
(Dwp_output_file::add_contribution): ...this.
(Dwp_output_file::add_cu_set): Combine parameters into a struct.
(Dwp_output_file::add_tu_set): Likewise.
(Dwp_output_file::Contribution): New type.
(Dwp_output_file::Section::contributions): New data member.
(Dwp_output_file::Cu_or_tu_set): Remove.
(Dwp_output_file::Section::Section): New ctor.
(Dwp_output_file::Dwp_index::Shndx_pool): Remove.
(Dwp_output_file::Dwp_index::Section_table): New type.
(Dwp_output_file::Dwp_index::Dwp_index): Initialize new data members.
(Dwp_output_file::Dwp_index::enter_set): Change type of "set"
parameter.
(Dwp_output_file::Dwp_index::shndx_pool): Remove.
(Dwp_output_file::Dwp_index::shndx_pool_end): Remove.
(Dwp_output_file::Dwp_index::section_table): New member function.
(Dwp_output_file::Dwp_index::section_table_end): New member function.
(Dwp_output_file::Dwp_index::shndx_pool_size): Remove.
(Dwp_output_file::Dwp_index::section_table_rows): New member function.
(Dwp_output_file::Dwp_index::section_table_cols): New member function.
(Dwp_output_file::Dwp_index::shndx_pool_): Remove.
(Dwp_output_file::Dwp_index::section_table_): New data member.
(Dwp_output_file::Dwp_index::section_mask_): New data member.
(Dwp_output_file::add_output_section): New member function.
(Dwp_output_file::write_new_section): New member function.
(Dwp_output_file::write_contributions): New member function.
(Dwp_output_file::section_id_map_): New data member.
(class Dwo_id_info_reader): Remove.
(class Unit_reader): New class.
(get_dwarf_section_name): New function.
(Dwo_file::read_executable): Adjust initializations of class data.
(Dwo_file::read): Add support for v2 package file format.
(Dwo_file::read_unit_index): Likewise.
(Dwo_file::sized_read_unit_index): Likewise.
(Dwo_file::copy_section): Likewise.
(Dwo_file::add_unit_set): Likewise.
(Dwp_output_file::add_output_section): Likewise.
(Dwp_output_file::add_contribution): Likewise.
(Dwp_output_file::Dwp_index::find_or_add): Use row index to check
for empty slot.
(Dwp_output_file::Dwp_index::enter_set): Add support for v2 package
file format.
(Dwp_output_file::Dwp_index::grow): Use row index to check for empty
slot.
(Dwp_output_file::initialize): Remove unused function.
(Dwp_output_file::finalize): Add support for v2 package file format.
(Dwp_output_file::write_index): Likewise.
* gdb-index.cc (Gdb_index_info_reader::visit_type_unit): Adjust
function prototype.
elfcpp/
* powerpc.h (EF_PPC64_ABI): New enum constant.
(STO_PPC64_LOCAL_BIT, STO_PPC64_LOCAL_MASK): Likewise.
(ppc64_decode_local_entry): New function.
(ppc64_encode_local_entry): Likewise.
gold/
* powerpc.cc (Powerpc_relobj::abiversion, set_abiversion,
ppc64_local_entry_offset, ppc64_local_entry_offset,
do_read_symbols): New functions.
(Powerpc_relobj::e_flags_, st_other_): New vars.
(Powerpc_relobj::Powerpc_relobj): Call set_abiversion.
(Powerpc_dynobj::abiversion, set_abiversion): New functions.
(Powerpc_relobj::e_flags_): New var.
(Target_powerpc::first_plt_entry_offset, plt_entry_size): Inline
and adjust for ELFv2.
(Target_powerpc::abiversion, set_abiversion, stk_toc): New functions.
(Powerpc_relobj::do_find_special_sections): Check no .opd in ELFv2.
(Powerpc_dynobj::do_find_special_sections): Likewise.
(Target_powerpc::do_define_standard_symbols): Define ".TOC.".
(Target_powerpc::Branch_info::make_stub): Adjust stub destination
to ELFv2 local entry.
(Target_powerpc::do_relax): No thread safe barriers needed for
ELFv2.
(Output_data_plt_powerpc::initial_plt_entry_size_,
plt_entry_size): Delete. Replace all uses with
first_plt_entry_offset() and plt_entry_size().
(Output_data_plt_powerpc::Output_data_plt_powerpc): Remove
reserved_size parm. Update callers.
(Output_data_plt_powerpc::entry_count): Update.
(Output_data_plt_powerpc::first_plt_entry_offset): Make private
and use Target_powerpc::first_plt_entry_offset().
(Output_data_plt_powerpc::get_plt_entry_size): Similarly and
rename to plt_entry_size.
(Output_data_plt_powerpc::add_ifunc_entry,
add_local_ifunc_entry): Adjust reloc for ELFv2.
(glink_eh_frame_fde_64): Rename to glink_eh_frame_fde_64v1.
(glink_eh_frame_fde_64v2): New.
(Stub_table::plt_call_size): Support ELFv2 sizing.
(Output_data_glink::add_eh_frame): Use the new FDE.
(Output_data_glink::set_final_data_size): Adjust for ELFv2 glink.
(Stub_table::do_write): Write ELFv2 stubs and glink.
(Target_powerpc::Relocate::relocate): Replaces nop after call
with ld 2,24(1) and adjust local offset destination for ELFv2.
This changes the behaviour of @h and @ha on PowerPC64 to report errors
on 32-bit overflow. The motivation for this change is that on
PowerPC64, most uses of @h and @ha modifiers and their corresponding
relocations are to build up 32-bit offsets. We'd like to know when
such offsets overflow. Only rarely do people use @h or @ha with the
high 32-bit modifiers to build a 64-bit constant. Those uses will now
need to use two new modifiers, @high and @higha, if the constant isn't
known at assembly time. For now, we won't report overflow at assembly
time..
This also fixes an error when applying some of the HIGHER and HIGHEST
relocations.
include/elf/
* ppc64.h (R_PPC64_ADDR16_HIGH, R_PPC64_ADDR16_HIGHA,
R_PPC64_TPREL16_HIGH, R_PPC64_TPREL16_HIGHA,
R_PPC64_DTPREL16_HIGH, R_PPC64_DTPREL16_HIGHA): New.
(IS_PPC64_TLS_RELOC): Match new tls relocs.
bfd/
* reloc.c (BFD_RELOC_PPC64_ADDR16_HIGH, BFD_RELOC_PPC64_ADDR16_HIGHA,
BFD_RELOC_PPC64_TPREL16_HIGH, BFD_RELOC_PPC64_TPREL16_HIGHA,
BFD_RELOC_PPC64_DTPREL16_HIGH, BFD_RELOC_PPC64_DTPREL16_HIGHA): New.
* elf64-ppc.c (ppc64_elf_howto_raw): Add entries for new relocs.
Make all _HA and _HI relocs report signed overflow.
(ppc64_elf_reloc_type_lookup): Handle new relocs.
(must_be_dyn_reloc, ppc64_elf_check_relocs): Likewise.
(dec_dynrel_count, ppc64_elf_relocate_section): Likewise.
(ppc64_elf_relocate_section): Don't apply 0x8000 adjust to
R_PPC64_TPREL16_HIGHER, R_PPC64_TPREL16_HIGHEST,
R_PPC64_DTPREL16_HIGHER, and R_PPC64_DTPREL16_HIGHEST.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
gas/
* config/tc-ppc.c (SEX16): Don't mask.
(REPORT_OVERFLOW_HI): Define as zero.
(ppc_elf_suffix): Support @high, @higha, @dtprel@high, @dtprel@higha,
@tprel@high, and @tprel@higha modifiers.
(md_assemble): Ignore X_unsigned when applying 16-bit insn fields.
Add (disabled) code to check @h and @ha reloc overflow for powerpc64.
Handle new relocs.
(md_apply_fix): Similarly.
elfcpp/
* powerpc.h (R_PPC64_ADDR16_HIGH, R_PPC64_ADDR16_HIGHA,
R_PPC64_TPREL16_HIGH, R_PPC64_TPREL16_HIGHA,
R_PPC64_DTPREL16_HIGH, R_PPC64_DTPREL16_HIGHA): Define.
gold/
* powerpc.cc (Target_powerpc::Scan::check_non_pic): Handle new relocs.
(Target_powerpc::Scan::global, local): Likewise.
(Target_powerpc::Relocate::relocate): Likewise. Check for overflow
on all ppc64 @h and @ha relocs.
(Output_data_got::add_constant_pair): New function.
* powerpc.cc (Output_data_got_powerpc): Override all Output_data_got
methods used so as to first call reserve_ent().
* gold-threads.h (Once): Conditionalize member was_run_lock_ on
[ENABLE_THREADS && __GCC_HAVE_SYNC_COMPARE_AND_SWAP_4], matching
its only use.
* gold-threads.cc (Once::Once): Likewise conditionalize initializer.
2013-09-03 Pavel Chupin <pavel.v.chupin@intel.com>
PR gold/15927
* x86_64.cc (Target_x86_64<size>::Scan::global): Use relative
relocation for R_X86_64_32 on x32.
* output.cc (Output_segment::set_section_addresses): Take new
Target* argument. If target->isolate_execinstr() and the segment
is executable and starts at a target->abi_pagesize() boundary,
pad its end out to a target->abi_pagesize() boundary with code fill.
* output.h (Output_segment::set_section_addresses): Update decl.
* layout.h (Layout::check_output_data_for_reset_values): Take new
argument RELAX_OUTPUTS.
(Layout): New member relax_output_list_.
(Layout::add_relax_output): New method.
* layout.cc (Layout::Layout): Update constructor.
(Layout::reset_relax_output): New method.
(Layout::clean_up_after_relaxation): Call it.
(Layout::prepare_for_relaxation): Update caller.
(Layout::set_segment_offsets): Update callers of set_section_addresses.
Call reset_relax_output before re-processing segments for
isolate_execinstr case.
(Layout::write_data): Handle relax_output_list_.
(Layout::Relaxation_debug_check::check_output_data_for_reset_values):
Take new argument RELAX_OUTPUTS. Assert it's an empty collection.
Revert support for v2 DWP files:
2013-03-01 Cary Coutant <ccoutant@google.com>
Add dwp support for v2 DWARF package file format.
* dwarf_reader.cc (Dwarf_info_reader::visit_type_unit): Add
tu_length parameter. Adjust all callers.
* dwarf_reader.h (Dwarf_info_reader::visit_type_unit): Likewise.
* dwp.cc: Include dwarf.h.
(Section_bounds): New struct type.
(Unit_set): New struct type.
(Dwo_file::Dwo_file): Initialize new data member.
(Dwo_file::read_compunit_index, Dwo_file::read_typeunit_index):
Combine and rename to...
(Dwo_file::read_unit_index): ...this.
(Dwo_file::sized_read_compunit_index)
(Dwo_file::sized_read_typeunit_index): Combine and rename to...
(Dwo_file::sized_read_unit_index): ...this.
(Dwo_file::copy_section): Remove section_name, is_str_offsets
parameters; add section_id parameter.
(Dwo_file::add_cu_set, Dwo_file::add_tu_set): Combine and rename to...
(Dwo_file::add_unit_set): ...this.
(Dwo_file::shndx_map_): Remove.
(Dwo_file::sect_offsets_): New data member.
(Dwp_output_file::Dwp_output_file): Initialize new data members.
(Dwp_output_file::add_section): Rename to...
(Dwp_output_file::add_contribution): ...this.
(Dwp_output_file::add_cu_set): Combine parameters into a struct.
(Dwp_output_file::add_tu_set): Likewise.
(Dwp_output_file::Contribution): New type.
(Dwp_output_file::Section::contributions): New data member.
(Dwp_output_file::Cu_or_tu_set): Remove.
(Dwp_output_file::Section::Section): New ctor.
(Dwp_output_file::Dwp_index::Shndx_pool): Remove.
(Dwp_output_file::Dwp_index::Section_table): New type.
(Dwp_output_file::Dwp_index::Dwp_index): Initialize new data members.
(Dwp_output_file::Dwp_index::enter_set): Change type of "set"
parameter.
(Dwp_output_file::Dwp_index::shndx_pool): Remove.
(Dwp_output_file::Dwp_index::shndx_pool_end): Remove.
(Dwp_output_file::Dwp_index::section_table): New member function.
(Dwp_output_file::Dwp_index::section_table_end): New member function.
(Dwp_output_file::Dwp_index::shndx_pool_size): Remove.
(Dwp_output_file::Dwp_index::section_table_rows): New member function.
(Dwp_output_file::Dwp_index::section_table_cols): New member function.
(Dwp_output_file::Dwp_index::shndx_pool_): Remove.
(Dwp_output_file::Dwp_index::section_table_): New data member.
(Dwp_output_file::Dwp_index::section_mask_): New data member.
(Dwp_output_file::add_output_section): New member function.
(Dwp_output_file::write_new_section): New member function.
(Dwp_output_file::write_contributions): New member function.
(Dwp_output_file::section_id_map_): New data member.
(class Dwo_id_info_reader): Remove.
(class Unit_reader): New class.
(get_dwarf_section_name): New function.
(Dwo_file::read_executable): Adjust initializations of class data.
(Dwo_file::read): Add support for v2 package file format.
(Dwo_file::read_unit_index): Likewise.
(Dwo_file::sized_read_unit_index): Likewise.
(Dwo_file::copy_section): Likewise.
(Dwo_file::add_unit_set): Likewise.
(Dwp_output_file::add_output_section): Likewise.
(Dwp_output_file::add_contribution): Likewise.
(Dwp_output_file::Dwp_index::find_or_add): Use row index to check
for empty slot.
(Dwp_output_file::Dwp_index::enter_set): Add support for v2 package
file format.
(Dwp_output_file::Dwp_index::grow): Use row index to check for empty
slot.
(Dwp_output_file::initialize): Remove unused function.
(Dwp_output_file::finalize): Add support for v2 package file format.
(Dwp_output_file::write_index): Likewise.
* gdb-index.cc (Gdb_index_info_reader::visit_type_unit): Adjust
function prototype.
* object.cc (Sized_relobj::do_output_section_address): New function.
(Sized_relobj): Instantiate explicitly.
* object.h (Object::output_section_address): New function.
(Object::do_output_section_address): New function.
(Sized_relobj::do_output_section_address): New function.
* powerpc.cc (Target_powerpc::symval_for_branch): Use it.
* options.h (General_options): Add -Trodata-segment option.
* parameters.cc (Parameters::check_rodata_segment): New function.
(Parameters::set_target_once): Call it.
* parameters.h (Parameters): Declare it (private member function).
* layout.cc (load_seg_unusable_for_headers): New function, broken
out of Layout::relaxation_loop_body. If TARGET->isolate_execinstr()
then validate rodata segment rather than text segment.
(relaxation_loop_body): Call that.
(is_text_segment): New function. Don't admit a non-executable
segment if TARGET->isolate_execinstr().
(set_segment_offsets): Call it. Honor -Trodata-segment option.
* elf64-ppc.c (struct ppc_stub_hash_entry): Delete "addend".
(ppc64_elf_size_stubs): Don't set "addend".
(ppc64_elf_relocate_section): Don't allow calls via
toc-adjusting stubs without a following nop even in an
executable, except for self-calls and both libc_start_main
and .libc_start_main.
gold/
* powerpc.cc (Target_powerpc::Relocate::relocate): Update self-call
comment.
* dwarf_reader.cc (Dwarf_ranges_table::read_ranges_table): Save
reloc_type_.
(Dwarf_ranges_table::read_range_list): Call lookup_reloc.
(Dwarf_ranges_table::lookup_reloc): New function.
* dwarf_reader.h (Dwarf_ranges_table::Dwarf_ranges_table): Initialize
reloc_type_.
(Dwarf_ranges_table::lookup_reloc): New function.
(Dwarf_ranges_table::reloc_type_): New data member.
* powerpc.cc (Output_data_brlt_powerpc::reset_brlt_sizes): New
function.
(Output_data_brlt_powerpc::finalize_brlt_sizes): New function.
(Target_powerpc::do_relax): Call the above.
on garbage collected .opd section.
* powerpc.cc (Target_powerpc::do_gc_add_reference): Test dst_shndx
is non-zero.
(Target_powerpc::do_gc_mark_symbols): Likewise for sym->shndx().
(Target_powerpc::do_function_location): Likewise for loc->shndx.
* resolve.cc (Symbol::override_base): Don't override st_type
from plugin placeholder symbols.
(Symbol_table::resolve): Likewise.
(Symbol_table::should_override): Don't complain about TLS mismatch
if the TO symbol is a plugin placeholder.
* testsuite/Makefile.am (plugin_test_tls): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/plugin_test_tls.sh: New test script.
* testsuite/two_file_test_2_tls.cc: New test source.
* testsuite/two_file_test_tls.cc: New test source.
gold/
* layout.cc (Layout::set_segment_offsets): Taking care of the case when
the maximum segment alignment is larger than the page size.
* testsuite/Makefile.am (large_symbol_alignment): Test that Gold
correctly aligns the symbols with large alignemnt.
* testsuite/Makefile.in: Regenerate.
* testsuite/large_symbol_alignment.cc: New file.
Sriraman Tallam <tmsriram@google.com>
* options.h (sort_section): New option.
* output.h (Input_section_sort_section_prefix_special_ordering_compare):
Rename from Input_section_sort_section_name_special_ordering_compare.
(Input_section_sort_section_name_compare): New struct.
* output.cc (Output_section::Input_section_sort_section_name_compare::
operator()): New function.
(Output_section::sort_attached_input_sections): Use new sort function
for .text if --sort-section=name is specified.
* layout.cc (Layout::make_output_section):
Add sorting by name when --sort-section=name is specified.
* testsuite/Makefile.am (text_section_grouping): Test option
--sort-section=name.
* testsuite/Makefile.in: Regenerate.
* testsuite/section_sorting_name.cc: New file.
* testsuite/section_sorting_name.sh: New file.
* symtab.h (Symbol::is_cxx_vtable): New function.
* target-reloc.h (relocate_section): Check for vtable symbol.
* testsuite/Makefile.am (missing_key_func.sh): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/missing_key_func.cc: New test source.
* testsuite/missing_key_func.sh: New test script.
* object.cc (Sized_relobj_file::get_symbol_location_info): Set
type of enclosing symbol.
(Relocate_info::location): Check symbol type when describing symbol.
* object.h (Symbol_location_info): Remove unused line_number;
add enclosing_symbol_type.
* testsuite/debug_msg.sh: Adjust expected output.
PR ld/15365
* layout.cc (Layout::finalize): Make __ehdr_start STV_HIDDEN.
ld/
PR ld/15365
* emultempl/elf32.em (gld${EMULATION_NAME}_before_allocation):
Restrict __ehdr_start's export class to no less than STV_HIDDEN.
ld/testsuite/
PR ld/15365
* ld-elf/ehdr_start.d: Expect __ehdr_start to be STB_LOCAL.
* ld-mips-elf/ehdr_start-1.nd: New test.
* ld-mips-elf/ehdr_start-2.nd: New test.
* ld-mips-elf/ehdr_start-1.ld: New test linker script.
* ld-mips-elf/ehdr_start-2.ld: New test linker script.
* ld-mips-elf/ehdr_start-new.s: New test source.
* ld-mips-elf/ehdr_start-o32.s: New test source.
* ld-mips-elf/mips-elf.exp: Run the new tests.
gold/
* output.cc (Output_section::add_merge_input_section): Allow
to merge sections if the alignment is more than character size.
* merge.h (Output_merge_string::Output_merge_string): Remove
assert.
* merge.cc (Output_merge_string<Char_type>::do_add_input_section): Count
only not-null strings. Check the alignment of strings.
* stringpool.h
(Stringpool_template<Stringpool_char>::Stringpool_template): Add
alignment as the argument.
(Stringpool_template<Stringpool_char>::addralign_): New class member.
* stringpool.cc (Stringpool_template<Stringpool_char>::new_key_offset):
Align non-zero length strings according to the addralign_.
(Stringpool_template<Stringpool_char>::set_string_offsets):
Updating offsets according to the given alignment.
* testsuite/Makefile.am (text_section_grouping): Test if string
literals are getting merged.
* testsuite/Makefile.in: Regenerate.
* testsuite/merge_string_literals_1.c: New file.
* testsuite/merge_string_literals_2.c: Ditto.
* testsuite/merge_string_literals.sh: Ditto.
gold/
* gold.cc (queue_final_tasks): invoke layout->queue_build_id_tasks().
* layout.cc (Hash_task): New class.
(Layout::queue_build_id_tasks): New function.
(Layout::write_build_id): Handle single-thread portion of build ID
computation. (In some cases, all of it is single-threaded.) Replace
{sha1,md5}_process_bytes with {sha1,md5}_buffer to get the same
functionality in fewer lines of code.
* layout.h (Layout::queue_build_id_tasks): New function declaration.
* options.h (General_options): make "--build-id" default to tree
rather than sha1. Add two new options related to --build-id=tree:
--build-id-chunk-size-for-treehash and
--build-id-min-file-size-for-treehash.
* Makefile.am: add testing of --build-id=tree and related new options
(these tests will be invoked by "make check").
* Makefile.in: Regenerate.
owner when sections are not adjacent and exceed group size.
(Target_powerpc::group_sections): Handle corner case.
(Target_powerpc::Branch_info::make_stub): Handle case where
stub table doesn't exist due to branches in non-exec sections.
(Target_powerpc::Relocate::relocate): Likewise.
* archive.cc (Archive::get_elf_object_for_member): Create the elf
object before calling the plugin claim_file handler. Pass the elf
object of the archive to the plugin. Delete the elf object if the
plugin claims the file.
* symtab.cc (Symbol_table::set_dynsym_indexes): Don't set object
is_needed by weak references. Clear version for symbols defined
in as-needed objects that are not needed.
static and public. Add report_err param. Return false for data refs.
(Target_powerpc::rela_dyn_section): New overloaded function.
(Target_powerpc::plt_, iplt_): Elucidate.
(Output_data_plt_powerpc::entry_count): Handle current_data_size()==0.
(Output_data_plt_powerpc::do_write): Don't write .iplt.
(Output_data_plt_powerpc::plt_entry_count): Don't add .iplt entries.
(Target_powerpc::Scan::local, global): Adjust reloc_needs_plt_for_ifunc
calls. Put ifunc dynamic relocs in irela_dyn_section. Only
push_branch and make_plt_entry for ifunc syms when
reloc_needs_plt_for_ifunc.
(Target_powerpc::Relocate::relocate): Don't use plt entry value
for ifunc unless reloc_needs_plt_for_ifunc.
gold/
* dwarf_reader.cc (Dwarf_info_reader::visit_type_unit): Add
tu_length parameter. Adjust all callers.
* dwarf_reader.h (Dwarf_info_reader::visit_type_unit): Likewise.
* dwp.cc: Include dwarf.h.
(Section_bounds): New struct type.
(Unit_set): New struct type.
(Dwo_file::Dwo_file): Initialize new data member.
(Dwo_file::read_compunit_index, Dwo_file::read_typeunit_index):
Combine and rename to...
(Dwo_file::read_unit_index): ...this.
(Dwo_file::sized_read_compunit_index)
(Dwo_file::sized_read_typeunit_index): Combine and rename to...
(Dwo_file::sized_read_unit_index): ...this.
(Dwo_file::copy_section): Remove section_name, is_str_offsets
parameters; add section_id parameter.
(Dwo_file::add_cu_set, Dwo_file::add_tu_set): Combine and rename to...
(Dwo_file::add_unit_set): ...this.
(Dwo_file::shndx_map_): Remove.
(Dwo_file::sect_offsets_): New data member.
(Dwp_output_file::Dwp_output_file): Initialize new data members.
(Dwp_output_file::add_section): Rename to...
(Dwp_output_file::add_contribution): ...this.
(Dwp_output_file::add_cu_set): Combine parameters into a struct.
(Dwp_output_file::add_tu_set): Likewise.
(Dwp_output_file::Contribution): New type.
(Dwp_output_file::Section::contributions): New data member.
(Dwp_output_file::Cu_or_tu_set): Remove.
(Dwp_output_file::Section::Section): New ctor.
(Dwp_output_file::Dwp_index::Shndx_pool): Remove.
(Dwp_output_file::Dwp_index::Section_table): New type.
(Dwp_output_file::Dwp_index::Dwp_index): Initialize new data members.
(Dwp_output_file::Dwp_index::enter_set): Change type of "set"
parameter.
(Dwp_output_file::Dwp_index::shndx_pool): Remove.
(Dwp_output_file::Dwp_index::shndx_pool_end): Remove.
(Dwp_output_file::Dwp_index::section_table): New member function.
(Dwp_output_file::Dwp_index::section_table_end): New member function.
(Dwp_output_file::Dwp_index::shndx_pool_size): Remove.
(Dwp_output_file::Dwp_index::section_table_rows): New member function.
(Dwp_output_file::Dwp_index::section_table_cols): New member function.
(Dwp_output_file::Dwp_index::shndx_pool_): Remove.
(Dwp_output_file::Dwp_index::section_table_): New data member.
(Dwp_output_file::Dwp_index::section_mask_): New data member.
(Dwp_output_file::add_output_section): New member function.
(Dwp_output_file::write_new_section): New member function.
(Dwp_output_file::write_contributions): New member function.
(Dwp_output_file::section_id_map_): New data member.
(class Dwo_id_info_reader): Remove.
(class Unit_reader): New class.
(get_dwarf_section_name): New function.
(Dwo_file::read_executable): Adjust initializations of class data.
(Dwo_file::read): Add support for v2 package file format.
(Dwo_file::read_unit_index): Likewise.
(Dwo_file::sized_read_unit_index): Likewise.
(Dwo_file::copy_section): Likewise.
(Dwo_file::add_unit_set): Likewise.
(Dwp_output_file::add_output_section): Likewise.
(Dwp_output_file::add_contribution): Likewise.
(Dwp_output_file::Dwp_index::find_or_add): Use row index to check
for empty slot.
(Dwp_output_file::Dwp_index::enter_set): Add support for v2 package
file format.
(Dwp_output_file::Dwp_index::grow): Use row index to check for empty
slot.
(Dwp_output_file::initialize): Remove unused function.
(Dwp_output_file::finalize): Add support for v2 package file format.
(Dwp_output_file::write_index): Likewise.
* gdb-index.cc (Gdb_index_info_reader::visit_type_unit): Adjust
function prototype.
* dwarf_reader.cc (Dwarf_info_reader::check_buffer): Move
function into class definition in header file.
(Dwarf_info_reader::warn_corrupt_debug_section): New function.
* dwarf_reader.h (Dwarf_info_reader::warn_corrupt_debug_section):
New function.
(Dwarf_info_reader::check_buffer): Move here from .cc file.
* target.cc (Target::do_plt_fde_location): New function.
* ehframe.h (class FDE): Add post_map field to u_.from_linker,
accessor function, and constructor param.
(struct Post_fde, Post_fdes): Declare.
(Cie::write): Add post_fdes param.
* ehframe.cc (Fde::write): Use plt_fde_location.
(struct Post_fde): Define.
(Cie::write): Stash FDEs added post merge mapping.
(Eh_frame::add_ehframe_for_plt): Assert no new CIEs after mapping.
Adjust Fde constructor call. Bump final_data_size_ for post map FDEs.
(Eh_frame::do_sized_write): Arrange to write post map FDES after
other FDEs.
* powerpc.cc (Target_powerpc::do_plt_fde_location): New function.
(Target_powerpc::has_glink): New function.
(Target_powerpc::do_relax): Add eh_frame info for stubs.
(struct Eh_cie, eh_frame_cie, glink_eh_frame_fde_64,
glink_eh_frame_fde_32, default_fde): New data.
(Stub_table::eh_frame_added_): New var.
(Stub_table::find_long_branch_entry, stub_address, stub_offset):
Make const.
(Stub_table::add_eh_frame): New function.
(Output_data_glink::add_eh_frame): New function.
(Target_powerpc::make_glink_section): Call add_eh_frame.
2013-01-24 Sriraman Tallam <tmsriram@google.com>
* layout.cc (Layout::layout): Check for option text_reorder.
(Layout::make_output_section): Ditto.
* options.h (text_reorder): New option.
* output.cc (Input_section_sort_compare): Remove special ordering
of section names.
(Output_section::
Input_section_sort_section_name_special_ordering_compare::
operator()): New function.
(Output_section::sort_attached_input_sections): Use new sort function
for .text.
* output.h (Input_section_sort_section_name_special_ordering_compare):
New struct.
* testsuite/Makefile.am (text_section_grouping): Test option
--no-text-reorder
* testsuite/Makefile.in: Regenerate.
* testsuite/text_section_grouping.sh: Check order of functions without
default text reordering.
The "new" dtags options have been around for 14+ years, and for all the
targets that gold supports, these flags have always existed. So enable
them by default.
Having behavior be different from ld.bfd isn't new, and this behavior
is the "better" one, so there shouldn't be a problem based on that.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The "new" dtags options have been around for 14+ years, so there
shouldn't be a need to generate both new & old tags anymore.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* layout.cc (Layout::layout): Do not do default sorting for
text sections when section ordering is specified.
(make_output_section): Ditto.
* testsuite/plugin_final_layout.cc: Name the function sections
to catch reordering issues.
