Now that ISA3.1 is out we can finish with the powerxx silliness.
bfd/
* elf64-ppc.c: Rename powerxx to power10 throughout.
gas/
* config/tc-ppc.c (md_assemble): Update for PPC_OPCODE_POWER10
renaming.
* testsuite/gas/ppc/prefix-align.d: Use -mpower10/-Mpower10 in
place of -mfuture/-Mfuture.
* testsuite/gas/ppc/prefix-pcrel.d: Likewise.
* testsuite/gas/ppc/prefix-reloc.d: Likewise.
gold/
* powerpc.cc: Rename powerxx to power10 throughout.
include/
* elf/ppc64.h: Update comment.
* opcode/ppc.h (PPC_OPCODE_POWER10): Rename from PPC_OPCODE_POWERXX.
ld/
* testsuite/ld-powerpc/callstub-1.d: Use -mpower10/-Mpower10 in
place of -mfuture/-Mfuture.
* testsuite/ld-powerpc/notoc2.d: Likewise.
* testsuite/ld-powerpc/powerpc.exp: Likewise.
* testsuite/ld-powerpc/tlsgd.d: Likewise.
* testsuite/ld-powerpc/tlsie.d: Likewise.
* testsuite/ld-powerpc/tlsld.d: Likewise.
opcodes/
* ppc-dis.c (ppc_opts): Add "power10" entry.
(print_insn_powerpc): Update for PPC_OPCODE_POWER10 renaming.
* ppc-opc.c (POWER10): Rename from POWERXX. Update all uses.
When a coredump is generated, there are a few registers in
ARC HS that are put under a special section, namely ".reg-v2".
It is for backward compatibility reasons with older tools that
we have decided not to extend the generic ".reg" section.
This patch makes it possible to display the information better
regarding that section. Compare the output of "readelf" without
and with these changes:
$ readelf -n core # without the patch
...
LINUX 0x0000000c Unknown note type: (0x00000600)
description data: 78 08 00 00 2f 6c 64 2d 75 43 6c 69
$ readelf -n core # with the patch
...
LINUX 0x0000000c NT_ARC_V2 (ARC HS accumulator/extra registers)
description data: 78 08 00 00 2f 6c 64 2d 75 43 6c 69
In another commit (soon to be submitted), GDB will makes use of these
changes to parse the extra section and its registers.
bfd/ChangeLog
2020-03-26 Anton Kolesov <anton.kolesov@synopsys.com>
* elf-bfd.h (elfcore_write_arc_v2): Add prototype.
* elf.c (elfcore_grok_arc_v2): New function.
(elfcore_grok_note): Call the new function to handle the corresponding
note.
(elfcore_write_arc_v2): New function.
(elfcore_write_register_note): Call the new function to handle the
corresponding pseudo-sections.
binutils/ChangeLog
2020-03-26 Anton Kolesov <anton.kolesov@synopsys.com>
* readelf.c (get_note_type): Handle NT_ARC_V2.
include/elf/ChangeLog
2020-03-26 Anton Kolesov <anton.kolesov@synopsys.com>
* common.h (NT_ARC_V2): New macro definitions.
Introduce new relaxations XTENSA_PDIFF{8,16,32} for positive differences
(subtracted symbol precedes diminished symbol) and XTENSA_NDIFF{8,16,32}
for negative differences (subtracted symbol follows diminished symbol).
Don't generate XTENSA_DIFF relocations in the assembler, generate
XTENSA_PDIFF or XTENSA_NDIFF based on relative symbol position.
Handle XTENSA_DIFF in BFD for compatibility with old object files.
Handle XTENSA_PDIFF and XTENSA_NDIFF in BFD, treating difference value
as unsigned.
2020-04-22 Max Filippov <jcmvbkbc@gmail.com>
bfd/
* bfd-in2.h: Regenerated.
* elf32-xtensa.c (elf_howto_table): New entries for
R_XTENSA_PDIFF{8,16,32} and R_XTENSA_NDIFF{8,16,32}.
(elf_xtensa_reloc_type_lookup, elf_xtensa_do_reloc)
(relax_section): Add cases for R_XTENSA_PDIFF{8,16,32} and
R_XTENSA_NDIFF{8,16,32}.
* libbfd.h (bfd_reloc_code_real_names): Add names for
BFD_RELOC_XTENSA_PDIFF{8,16,32} and
BFD_RELOC_XTENSA_NDIFF{8,16,32}.
* reloc.c: Add documentation for BFD_RELOC_XTENSA_PDIFF{8,16,32}
and BFD_RELOC_XTENSA_NDIFF{8,16,32}.
binutils/
* readelf.c (is_none_reloc): Recognize
BFD_RELOC_XTENSA_PDIFF{8,16,32} and
BFD_RELOC_XTENSA_NDIFF{8,16,32}.
gas/
* config/tc-xtensa.c (md_apply_fix): Replace
BFD_RELOC_XTENSA_DIFF{8,16,32} generation with
BFD_RELOC_XTENSA_PDIFF{8,16,32} and
BFD_RELOC_XTENSA_NDIFF{8,16,32} generation.
* testsuite/gas/xtensa/loc.d: Replace BFD_RELOC_XTENSA_DIFF16
with BFD_RELOC_XTENSA_PDIFF16 in the expected output.
include/
* elf/xtensa.h (elf_xtensa_reloc_type): New entries for
R_XTENSA_PDIFF{8,16,32} and R_XTENSA_NDIFF{8,16,32}.
ld/
* testsuite/ld-xtensa/relax-loc.d: New test definition.
* testsuite/ld-xtensa/relax-loc.s: New test source.
* testsuite/ld-xtensa/xtensa.exp (relax-loc): New test.
git commit 211dc24b87 removed most sh5 and sh64 SuperH support, after
they were obsoleted by git commit 2b213129c5. This patch removes a
few remaining pieces that should have gone with 211dc24b87.
include/
* elf/sh.h (STO_SH5_ISA32, SHF_SH5_ISA32, SHF_SH5_ISA32_MIXED),
(SHT_SH5_CR_SORTED, STT_DATALABEL): Delete.
bfd/
* elf32-sh.c (sh_elf_relocate_section): Remove STO_SH5_ISA32
processing.
The stub size in GO32 executables has historically been fixed at 2048
bytes, due to hardcoded limitations in bfd. Recent patches to djgpp by
Stas Sergeev (CC'd) have pushed the stub right up to this limit, so if
any further expansion is desired, this must first be patched in bfd.
This series includes three patches: The first changes the meaning of
the bfd->origin field slightly, so that target code can use this to
specify an offset into the file where the actual bfd is located.
The second patch then uses this to enable support for variable-sized
stubs in the coff-go32-exe format.
The final patch is only a cleanup, it normalizes function and variable
names in coff-stgo32.c so that they all begin with the same prefix.
bfd * bfdio.c (bfd_bread, bfd_tell, bfd_seek, bfd_mmap): Always add
bfd->origin to file offset.
* bfdwin.c (bfd_get_file_window): Likewise.
* bfd.c: Clarify the use of the bfd->origin field.
* bfd-in2.h: Regenerate.
* coff-i386.c: Don't include go32exe.h. Allow overriding
coff_write_object_contents via COFF_WRITE_CONTENTS.
* coff-stgo32.c (go32exe_cleanup, go32exe_mkobject)
(go32exe_write_object_contents): New functions.
(go32exe_temp_stub, go32exe_temp_stub_size): New static globals.
(COFF_WRITE_CONTENTS, GO32EXE_DEFAULT_STUB_SIZE): Define.
(create_go32_stub): Remove check for 2k size limit. Read stub
from go32exe_temp_stub if present.
(go32_stubbed_coff_bfd_copy_private_bfd_data): Allocate and
copy variable-length stub.
(go32_check_format): Read stub to go32exe_temp_stub, set
origin, return go32exe_cleanup.
(adjust_filehdr_in_post, adjust_filehdr_out_pre)
(adjust_filehdr_out_post, adjust_scnhdr_in_post)
(adjust_scnhdr_out_pre, adjust_scnhdr_out_post)
(adjust_aux_in_post, adjust_aux_out_pre, adjust_aux_out_post):
Remove functions and their associated #defines.
* coffcode.h (coff_mkobject_hook): Remove stub copying code.
* libcoff-in.h: (struct coff_tdata): New field stub_size.
Rename field go32stub to stub.
* libcoff.h: Regenerate.
* coff-stgo32.c (go32_check_format): Rename to...
(go32exe_check_format): ...this.
(go32_stubbed_coff_bfd_copy_private_bfd_data): Rename to...
(go32exe_copy_private_bfd_data): ...this.
(stub_bytes): Rename to...
(go32exe_default_stub): ...this.
(create_go32_stub): Rename to...
(go32exe_create_stub): ...this.
* coff-stgo32.c (go32exe_copy_private_bfd_data): Avoid realloc
when possible.
include * coff/go32exe.h: Remove file.
* coff/internal.h (struct internal_filehdr): Remove field
go32stub. Remove flag F_GO32STUB.
FreeBSD's kernel recently added a new ELF auxiliary vector entry
holding a mask of software features provided by the kernel. This
change fixes 'info auxv' to report the name and description for this
vector entry instead of '???'.
include/ChangeLog:
* elf/common.h (AT_FREEBSD_BSDFLAGS): Define.
gdb/ChangeLog:
* fbsd-tdep.c (fbsd_print_auxv_entry): Handle AT_FREEBSD_BSDFLAGS.
Fix comma at end of enumerator list seen with -std=c++98.
* plugin-api.h (enum ld_plugin_symbol_type): Remove
comma after last value of an enum.
* lto-symtab.h (enum gcc_plugin_symbol_type): Likewise.
bfd/ChangeLog:
* elf.c (elfcore_grok_netbsd_note): Add support for
NT_NETBSDCORE_LWPSTATUS notes.
binutils/ChangeLog:
* readelf.c (get_netbsd_elfcore_note_type): Add support for
NT_NETBSDCORE_LWPSTATUS notes.
include/ChangeLog:
* elf/common.h (NT_NETBSDCORE_LWPSTATUS): New define.
Fixes additional locations not handled in the first patch.
When converting between addresses in ELF headers [octets] and bfd
LMA/VMA [bytes], the number of octets per byte needs to be incorporated.
include/
* bfdlink.h (struct bfd_link_order): Add unit (bytes/octets) to
offset and size members.
* elf/internal.h (struct elf_internal_phdr): Likewise for
p_align member.
(struct elf_segment_map): Likewise for p_paddr and p_size
members
bfd/
* bfd.c (bfd_record_phdr): New local "opb". Fix assignment of
"p_paddr" from "at".
* elfcode.h (bfd_from_remote_memory): Add units to several
parameters. New local "opb". Fix usage of p_align. Fix
calculation of "localbase" from "ehdr_vma" and "p_vaddr". Fix
call of target_read_memory.
* elflink.c (elf_fixup_link_order): Fix scope of "s" local. Fix
calculation of "offset" and "output_offset".
(bfd_elf_final_link): New local "opb". Fix calculation of "size"
from "offset" and fix calculation of "end" from "vma+size". Fix
comparison between "sh_addr" and "vma"/"output_offset".
(bfd_elf_discard_info): Fix calculation of "eh_alignment".
* elf-bfd.h (struct elf_link_hash_table): Add unit to tls_size
member.
* elf.c (_bfd_elf_map_sections_to_segments): Add unit (bytes/
octets) to "wrap_to2 and "phdr_size" locals. Fix calculation of
"wrap_to" value. Add unit (bytes) to phdr_lma variable. Fix
assignment of p_paddr from phdr_lma. Fix comparison between
"lma+size" and "next->lma".
(elf_sort_segments): Fix assignment from p_paddr to lma.
(assign_file_positions_for_load_sections): Add unit (bytes) to
local "align". Fix calculation of local "off_adjust". Fix
calculation of local "filehdr_vaddr".
(assign_file_positions_for_non_load_sections): New local "opb".
Fix calculation of "end" from "p_size". Fix comparison between
"vma+SECTION_SIZE" and "start". Fix calculation of "p_memsz"
from "end" and "p_vaddr".
(rewrite_elf_program_header): Fix comparison between p_vaddr and
vma. Fix assignment to p_paddr from lma. Fix comparison between
p_paddr and lma. Fix assignment to p_paddr from lma.
* merge.c (sec_merge_emit): New local "opb". Convert
"alignment_power" to octets.
(_bfd_add_merge_section): New locals "alignment_power" and
"opb". Fix comparison between "alignment_power" and
"sizeof(align)".
(_bfd_merge_sections): New local "opb". Divide size by opb
before checking align mask.
When converting between addresses in ELF headers [octets] and bfd
LMA/VMA [bytes], the number of octets per byte needs to be
incorporated.
In ld, the SIZEOF_HEADERS linker script statement must be resolved to
bytes instead of octets.
include/
* elf/internal.h (struct elf_internal_phdr): Add unit (octets)
to several member field comments.
(Elf_Internal_Shdr): likewise.
bfd/
* elf.c (_bfd_elf_make_section_from_shdr): Introduce new temp
opb. Divide Elf_Internal_Shdr::sh_addr by opb when setting
section LMA/VMA.
(_bfd_elf_make_section_from_phdr): Similarly.
(elf_fake_sections): Fix calculation of
Elf_Internal_shdr::sh_addr from section VMA.
(_bfd_elf_map_sections_to_segments): Fix mixup between octets
and bytes.
(assign_file_positions_for_load_sections): Fix calculations of
Elf_Internal_shdr::p_vaddr and p_paddr from section LMA/VMA. Fix
comparison between program header address and section LMA.
(assign_file_positions_for_non_load_sections): Likewise.
(rewrite_elf_program_header): Likewise. Introduce new temp opb.
(IS_CONTAINED_BY_VMA): Add parameter opb.
(IS_CONTAINED_BY_LMA,IS_SECTION_IN_INPUT_SEGMENT,
INCLUDE_SECTION_IN_SEGMENT): Likewise.
(copy_elf_program_header): Update call to ELF_SECTION_IN_SEGMENT.
Fix calculations of p_addr_valid and p_vaddr_offset.
* elflink.c (elf_link_add_object_symbols): Multiply section VMA
with octets per byte when comparing against p_vaddr.
ld/
* ldexp.c (fold_name): Return SIZEOF_HEADERS in bytes.
This commit pulls in the latest changes for the include/ and
libiberty/ directories. The last sync was in commit
533da48302.
This commit also removes the file libiberty/rust-demangle.h, this file
has been removed in upstream GCC, and should have been deleted as part
of the previous sync up, which included this ChangeLog entry:
2019-11-16 Eduard-Mihai Burtescu <eddyb@lyken.rs>
....
* rust-demangle.h: Remove.
I've grep'd over the binutils-gdb source and can find no reference to
the rust-demangle.h file, and everything seems to build fine without
it, so I assume its continued existence was a mistake.
include/ChangeLog:
Import from gcc mainline:
2020-02-05 Andrew Burgess <andrew.burgess@embecosm.com>
* hashtab.h (htab_remove_elt): Make a parameter const.
(htab_remove_elt_with_hash): Likewise.
libiberty/ChangeLog:
* rust-demangle.h: Removed.
Import from gcc mainline:
2020-02-05 Andrew Burgess <andrew.burgess@embecosm.com>
* hashtab.c (htab_remove_elt): Make a parameter const.
(htab_remove_elt_with_hash): Likewise.
2020-01-23 Alexandre Oliva <oliva@adacore.com>
* argv.c (writeargv): Output empty args as "".
2020-01-18 Iain Sandoe <iain@sandoe.co.uk>
* cp-demangle.c (cplus_demangle_operators): Add the co_await
operator.
* testsuite/demangle-expected: Test co_await operator mangling.
According to the riscv privilege spec, some CSR are only valid when rv32 or
the specific extension is set. We extend the DECLARE_CSR and DECLARE_CSR_ALIAS
to record more informaton we need, and then check whether the CSR is valid
according to these information. We report warning message when the CSR is
invalid, so we have a choice between error and warning by --fatal-warnings
option. Also, a --no-warn/-W option is used to turn the warnings off, if
people don't want the warnings.
gas/
* config/tc-riscv.c (enum riscv_csr_class): New enum. Used to decide
whether or not this CSR is legal in the current ISA string.
(struct riscv_csr_extra): New structure to hold all extra information
of CSR.
(riscv_init_csr_hash): New function. According to the DECLARE_CSR and
DECLARE_CSR_ALIAS, insert CSR extra information into csr_extra_hash.
Call hash_reg_name to insert CSR address into reg_names_hash.
(md_begin): Call riscv_init_csr_hashes for each DECLARE_CSR.
(reg_csr_lookup_internal, riscv_csr_class_check): New functions.
Decide whether the CSR is valid according to the csr_extra_hash.
(init_opcode_hash): Update 'if (hash_error != NULL)' as hash_error is
not a boolean. This is same as riscv_init_csr_hash, so keep the
consistent usage.
* testsuite/gas/riscv/csr-dw-regnums.d: Add -march=rv32if option.
* testsuite/gas/riscv/priv-reg.d: Add f-ext by -march option.
* testsuite/gas/riscv/priv-reg-fail-fext.d: New testcase. The source
file is `priv-reg.s`, and the ISA is rv32i without f-ext, so the
f-ext CSR are not allowed.
* testsuite/gas/riscv/priv-reg-fail-fext.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-rv32-only.d: New testcase. The
source file is `priv-reg.s`, and the ISA is rv64if, so the
rv32-only CSR are not allowed.
* testsuite/gas/riscv/priv-reg-fail-rv32-only.l: Likewise.
include/
* opcode/riscv-opc.h: Extend DECLARE_CSR and DECLARE_CSR_ALIAS to
record riscv_csr_class.
opcodes/
* riscv-dis.c (print_insn_args): Updated since the DECLARE_CSR is changed.
gdb/
* riscv-tdep.c: Updated since the DECLARE_CSR is changed.
* riscv-tdep.h: Likewise.
* features/riscv/rebuild-csr-xml.sh: Generate the 64bit-csr.xml without
rv32-only CSR.
* features/riscv/64bit-csr.xml: Regernated.
binutils/
* dwarf.c: Updated since the DECLARE_CSR is changed.
This patch is part of a series that adds support for the Armv8.m
ARMv8.m Custom Datapath Extension to binutils.
This patch introduces the Custom Instructions Class 1/2/3 (Single/
Dual, Accumulator/Non-accumulator varianats) to the arm backend.
The following Custom Instructions are added: cx1, cx1a,
cx1d, cx1da, cx2, cx2a, cx2d, cx2da, cx3, cx3a, cx3d, cx3da.
Specification can be found at
https://developer.arm.com/docs/ddi0607/latest
This patch distinguishes between enabling CDE for different coprocessor
numbers by defining multiple architecture flags. This means that the
parsing of the architecture extension flags is kept entirely in the
existing code path.
We introduce a new IT block state to indicate the behaviour of these
instructions. This new state allows being used in an IT block or
outside an IT block, but does not allow the instruction to be used
inside a VPT block.
We need this since the CX*A instruction versions can be used in IT
blocks, but they aren't to have the conditional suffixes on them. Hence
we need to mark an instruction as allowed in either position.
We also need a new flag to objdump, in order to determine whether to
disassemble an instruction as CDE related or not.
Successfully regression tested on arm-none-eabi, and arm-wince-pe.
gas/ChangeLog:
2020-02-10 Stam Markianos-Wright <stam.markianos-wright@arm.com>
Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-arm.c (arm_ext_cde*): New feature sets for each
CDE coprocessor that can be enabled.
(enum pred_instruction_type): New pred type.
(BAD_NO_VPT): New error message.
(BAD_CDE): New error message.
(BAD_CDE_COPROC): New error message.
(enum operand_parse_code): Add new immediate operands.
(parse_operands): Account for new immediate operands.
(check_cde_operand): New.
(cde_coproc_enabled): New.
(cde_coproc_pos): New.
(cde_handle_coproc): New.
(cxn_handle_predication): New.
(do_custom_instruction_1): New.
(do_custom_instruction_2): New.
(do_custom_instruction_3): New.
(do_cx1): New.
(do_cx1a): New.
(do_cx1d): New.
(do_cx1da): New.
(do_cx2): New.
(do_cx2a): New.
(do_cx2d): New.
(do_cx2da): New.
(do_cx3): New.
(do_cx3a): New.
(do_cx3d): New.
(do_cx3da): New.
(handle_pred_state): Define new IT block behaviour.
(insns): Add newn CX*{,d}{,a} instructions.
(CDE_EXTENSIONS,armv8m_main_ext_table,armv8_1m_main_ext_table):
Define new cdecp extension strings.
* doc/c-arm.texi: Document new cdecp extension arguments.
* testsuite/gas/arm/cde-scalar.d: New test.
* testsuite/gas/arm/cde-scalar.s: New test.
* testsuite/gas/arm/cde-warnings.d: New test.
* testsuite/gas/arm/cde-warnings.l: New test.
* testsuite/gas/arm/cde-warnings.s: New test.
* testsuite/gas/arm/cde.d: New test.
* testsuite/gas/arm/cde.s: New test.
include/ChangeLog:
2020-02-10 Stam Markianos-Wright <stam.markianos-wright@arm.com>
Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/arm.h (ARM_EXT2_CDE): New extension macro.
(ARM_EXT2_CDE0): New extension macro.
(ARM_EXT2_CDE1): New extension macro.
(ARM_EXT2_CDE2): New extension macro.
(ARM_EXT2_CDE3): New extension macro.
(ARM_EXT2_CDE4): New extension macro.
(ARM_EXT2_CDE5): New extension macro.
(ARM_EXT2_CDE6): New extension macro.
(ARM_EXT2_CDE7): New extension macro.
opcodes/ChangeLog:
2020-02-10 Stam Markianos-Wright <stam.markianos-wright@arm.com>
Matthew Malcomson <matthew.malcomson@arm.com>
* arm-dis.c (struct cdeopcode32): New.
(CDE_OPCODE): New macro.
(cde_opcodes): New disassembly table.
(regnames): New option to table.
(cde_coprocs): New global variable.
(print_insn_cde): New
(print_insn_thumb32): Use print_insn_cde.
(parse_arm_disassembler_options): Parse coprocN args.
PR 25469
bfd * archures.c: Add GBZ80 and Z80N machine values.
* reloc.c: Add BFD_RELOC_Z80_16_BE.
* coff-z80.c: Add support for new reloc.
* coffcode.h: Add support for new machine values.
* cpu-z80.c: Add support for new machine names.
* elf32-z80.c: Add support for new reloc.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
binutils* readelf.c (get_machine_flags): Add support for Z80N machine
number.
gas * config/tc-z80.c: Add -gbz80 command line option to generate code
for the GameBoy Z80. Add support for generating DWARF.
* config/tc-z80.h: Add support for DWARF debug information
generation.
* doc/c-z80.texi: Document new command line option.
* testsuite/gas/z80/gbz80_all.d: New file.
* testsuite/gas/z80/gbz80_all.s: New file.
* testsuite/gas/z80/z80.exp: Run the new tests.
* testsuite/gas/z80/z80n_all.d: New file.
* testsuite/gas/z80/z80n_all.s: New file.
* testsuite/gas/z80/z80n_reloc.d: New file.
include * coff/internal.h (R_IMM16BE): Define.
* elf/z80.h (EF_Z80_MACH_Z80N): Define.
(R_Z80_16_BE): New reloc.
ld * emulparams/elf32z80.sh: Use z80 emulation.
* emultempl/z80.em: Make generic to both COFF and ELF Z80 emulations.
* emultempl/z80elf.em: Delete.
* testsuite/ld-elf/pr22450.d: Expect to fail for the Z80.
* testsuite/ld-elf/sec64k.exp: Fix Z80 assembly.
* testsuite/ld-unique/pr21529.s: Avoid register name conflict.
* testsuite/ld-unique/unique.s: Likewise.
* testsuite/ld-unique/unique_empty.s: Likewise.
* testsuite/ld-unique/unique_shared.s: Likewise.
* testsuite/ld-unique/unique.d: Updated expected output.
* testsuite/ld-z80/arch_z80n.d: New file.
* testsuite/ld-z80/comb_arch_z80_z80n.d: New file.
* testsuite/ld-z80/labels.s: Add more labels.
* testsuite/ld-z80/relocs.s: Add more reloc tests.
* testsuite/ld-z80/relocs_f_z80n.d: New file
opcodes * z80-dis.c: Add support for GBZ80 opcodes.
IMAGE_DEBUG_TYPE_REPRO is defined in the latest version of the PE
specification [1]. The others are defined in Windows SDK headers and/or
reported by DUMPBIN.
[1] https://docs.microsoft.com/en-us/windows/win32/debug/pe-format
bfd/ChangeLog:
2020-01-16 Jon Turney <jon.turney@dronecode.org.uk>
* peXXigen.c (debug_type_names): Add names for new debug data type
values.
include/ChangeLog:
2020-01-16 Jon Turney <jon.turney@dronecode.org.uk>
* coff/internal.h (PE_IMAGE_DEBUG_TYPE_VC_FEATURE)
(PE_IMAGE_DEBUG_TYPE_POGO, PE_IMAGE_DEBUG_TYPE_ILTCG)
(PE_IMAGE_DEBUG_TYPE_MPX, PE_IMAGE_DEBUG_TYPE_REPRO): Add.
This patch moves MVE feature bits into the CORE_HIGH section. This makes sure
.fpu and -mfpu does not reset the bits set by MVE. This is important because
.fpu has no option to "set" these same bits and thus, mimic'ing GCC, we choose
to define MVE as an architecture extension rather than put it together with
other the legacy fpu features.
This will enable the following behavior:
.arch armv8.1-m.main
.arch mve
.fpu fpv5-sp-d16 #does not disable mve.
vadd.i32 q0, q1, q2
This patch also makes sure MVE is not taken into account during auto-detect.
This was already the case, but because we moved the MVE bits to the
architecture feature space we must make sure ARM_ANY does not include MVE.
gas/ChangeLog:
2020-01-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
PR 25376
* config/tc-arm.c (mve_ext, mve_fp_ext): Use CORE_HIGH.
(armv8_1m_main_ext_table): Use CORE_HIGH for mve.
* testsuite/arm/armv8_1-m-fpu-mve-1.s: New.
* testsuite/arm/armv8_1-m-fpu-mve-1.d: New.
* testsuite/arm/armv8_1-m-fpu-mve-2.s: New.
* testsuite/arm/armv8_1-m-fpu-mve-2.d: New.
include/ChangeLog:
2020-01-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
PR 25376
* opcodes/arm.h (FPU_MVE, FPU_MVE_FPU): Move these features to...
(ARM_EXT2_MVE, ARM_EXT2_MVE_FP): ... the CORE_HIGH space.
(ARM_ANY): Redefine to not include any MVE bits.
(ARM_FEATURE_ALL): Removed.
opcodes/ChangeLog:
2020-01-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
PR 25376
* opcodes/arm-dis.c (coprocessor_opcodes): Use CORE_HIGH for MVE bits.
(neon_opcodes): Likewise.
(select_arm_features): Make sure we enable MVE bits when selecting
armv8.1-m.main. Make sure we do not enable MVE bits when not selecting
any architecture.
gas/ChangeLog:
2020-01-15 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/tc-msp430.c (CHECK_RELOC_MSP430): Always generate 430X
relocations when the target is 430X, except when extracting part of an
expression.
(msp430_srcoperand): Adjust comment.
Initialize the expp member of the msp430_operand_s struct as
appropriate.
(msp430_dstoperand): Likewise.
* testsuite/gas/msp430/msp430.exp: Run new test.
* testsuite/gas/msp430/reloc-lo-430x.d: New test.
* testsuite/gas/msp430/reloc-lo-430x.s: New test.
include/ChangeLog:
2020-01-15 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* opcode/msp430.h (enum msp430_expp_e): New.
(struct msp430_operand_s): Add expp member to struct.
ld/ChangeLog:
2020-01-15 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* testsuite/ld-msp430-elf/msp430-elf.exp: Run new test.
* testsuite/ld-msp430-elf/reloc-lo-430x.s: New test.
Don't do that. Especially don't use shift counts that assume the type
being shifted is 32 bits when the type is long/unsigned long. Also
reverts part of a change I made on 2019-12-11 to tic4x_print_register
that on closer inspection turns out to be unnecessary.
include/
* opcode/tic4x.h (EXTR): Delete.
(EXTRU, EXTRS, INSERTU, INSERTS): Rewrite without zero/sign
extension using shifts. Do trim INSERTU value to specified bitfield.
opcodes/
* tic4x-dis.c (tic4x_print_register): Remove dead code.
gas/
* config/tc-tic4x.c (tic4x_operands_match): Correct tic3x trap
insertion.
Also fixes a real bug. The DECODE_INSN_I9a and DECODE_INSN_I9b both
use UNSIGNED_EXTRACT for 7 low bits of the result, but this was an
unsigned value due to "insn" being unsigned. DECODE_INSN_I9* is
therefore unsigned too, leading to a zero extension in an expression
using a bfd_vma if bfd_vma is 64 bits.
* opcode/spu.h: Formatting.
(UNSIGNED_EXTRACT): Use 1u.
(SIGNED_EXTRACT): Don't sign extend with shifts.
(DECODE_INSN_I9a, DECODE_INSN_I9b): Avoid left shift of signed value.
Keep result signed.
(DECODE_INSN_U9a, DECODE_INSN_U9b): Delete.
This patch changes the "class" of LLOCK/SCOND from "MEMORY" to
"LLOCK/SCOND" respectively. Moreover, it corrects the "data_size_mode".
These changes are necessary for GDB's atmoic sequence handler.
Signed-off-by: Shahab Vahedi <shahab@synopsys.com>
PR 25224
bfd * Makefile.am: Add z80-elf target support.
* configure.ac: Likewise.
* targets.c: Likewise.
* config.bfd: Add z80-elf target support and new arches: ez80 and z180.
* elf32-z80.c: New file.
* archures.c: Add new z80 architectures: eZ80 and Z180.
* coffcode.h: Likewise.
* cpu-z80.c: Likewise.
* bfd-in2.h: Likewise plus additional Z80 relocations.
* coff-z80.c: Add new relocations for Z80 target and local label check.
gas * config/tc-z80.c: Add new architectures: Z180 and eZ80. Add support
for assembler code generated by SDCC. Add new relocation types. Add
z80-elf target support.
* config/tc-z80.h: Add z80-elf target support. Enable dollar local
labels. Local labels starts from ".L".
* testsuite/gas/all/fwdexp.d: Fix failure due to symbol conflict.
* testsuite/gas/all/fwdexp.s: Likewise.
* testsuite/gas/z80/suffix.d: Fix failure on ELF target.
* testsuite/gas/z80/z80.exp: Add new tests
* testsuite/gas/z80/dollar.d: New file.
* testsuite/gas/z80/dollar.s: New file.
* testsuite/gas/z80/ez80_adl_all.d: New file.
* testsuite/gas/z80/ez80_adl_all.s: New file.
* testsuite/gas/z80/ez80_adl_suf.d: New file.
* testsuite/gas/z80/ez80_isuf.s: New file.
* testsuite/gas/z80/ez80_z80_all.d: New file.
* testsuite/gas/z80/ez80_z80_all.s: New file.
* testsuite/gas/z80/ez80_z80_suf.d: New file.
* testsuite/gas/z80/r800_extra.d: New file.
* testsuite/gas/z80/r800_extra.s: New file.
* testsuite/gas/z80/r800_ii8.d: New file.
* testsuite/gas/z80/r800_z80_doc.d: New file.
* testsuite/gas/z80/z180.d: New file.
* testsuite/gas/z80/z180.s: New file.
* testsuite/gas/z80/z180_z80_doc.d: New file.
* testsuite/gas/z80/z80_doc.d: New file.
* testsuite/gas/z80/z80_doc.s: New file.
* testsuite/gas/z80/z80_ii8.d: New file.
* testsuite/gas/z80/z80_ii8.s: New file.
* testsuite/gas/z80/z80_in_f_c.d: New file.
* testsuite/gas/z80/z80_in_f_c.s: New file.
* testsuite/gas/z80/z80_op_ii_ld.d: New file.
* testsuite/gas/z80/z80_op_ii_ld.s: New file.
* testsuite/gas/z80/z80_out_c_0.d: New file.
* testsuite/gas/z80/z80_out_c_0.s: New file.
* testsuite/gas/z80/z80_reloc.d: New file.
* testsuite/gas/z80/z80_reloc.s: New file.
* testsuite/gas/z80/z80_sli.d: New file.
* testsuite/gas/z80/z80_sli.s: New file.
ld * Makefile.am: Add new target z80-elf
* configure.tgt: Likewise.
* emultempl/z80.em: Add support for eZ80 and Z180 architectures.
* emulparams/elf32z80.sh: New file.
* emultempl/z80elf.em: Likewise.
* testsuite/ld-z80/arch_ez80_adl.d: Likewise.
* testsuite/ld-z80/arch_ez80_z80.d: Likewise.
* testsuite/ld-z80/arch_r800.d: Likewise.
* testsuite/ld-z80/arch_z180.d: Likewise.
* testsuite/ld-z80/arch_z80.d: Likewise.
* testsuite/ld-z80/comb_arch_ez80_z80.d: Likewise.
* testsuite/ld-z80/comb_arch_z180.d: Likewise.
* testsuite/ld-z80/labels.s: Likewise.
* testsuite/ld-z80/relocs.s: Likewise.
* testsuite/ld-z80/relocs_b_ez80.d: Likewise.
* testsuite/ld-z80/relocs_b_z80.d: Likewise.
* testsuite/ld-z80/relocs_f_z80.d: Likewise.
* testsuite/ld-z80/z80.exp: Likewise.
opcodes * z80-dis.c: Add support for eZ80 and Z80 instructions.
The ubsan complaint is fixed by the SBM change, with similar possible
complaints fixed by the EXTRACT change. The rest is just cleanup.
include/
* opcode/crx.h (inst <match>): Make unsigned int.
opcodes/
* crx-dis.c (EXTRACT, SBM): Avoid signed overflow.
(get_number_of_operands, getargtype, getbits, getregname),
(getcopregname, getprocregname, gettrapstring, getcinvstring),
(getregliststring, get_word_at_PC, get_words_at_PC, build_mask),
(powerof2, match_opcode, make_instruction, print_arguments),
(print_arg): Delete forward declarations, moving static to..
(getregname, getcopregname, getregliststring): ..these definitions.
(build_mask): Return unsigned int mask.
(match_opcode): Use unsigned int vars.
Note that using 1u in N32_BIT makes all of N32_BIT, __MASK, __MF, __GF
and __SEXT evaluate as unsigned int (the latter three when when their
v arg is int or smaller). This would be a problem if assigning the
result to a bfd_vma, long, or other type wider than an int since the
__SEXT result would be zero extended to the wider type. Fortunately
nds32 target code doesn't use wider types unnecessarily.
include/
* opcode/nds32.h (N32_BIT): Define using 1u.
(__SEXT): Use __MASK and N32_BIT.
(N32_IMMS): Remove duplicate mask.
opcodes/
* nds32-dis.c (print_insn16, print_insn32): Remove forward decls.
(struct objdump_disasm_info): Delete.
(nds32_parse_audio_ext, nds32_parse_opcode): Cast result of
N32_IMMS to unsigned before shifting left.
Attempting to build GDB in Ubuntu 16.04.6 LTS on x86_64, I ran into warnings
that caused the build to fail:
binutils-gdb/gdb/gdbsupport/safe-strerror.c:44:1: error: ‘char* select_strerror_r(char*, char*)’ defined but not used [-Werror=unused-function] select_strerror_r (char *res, char *)
The diagnostic macro DIAGNOSTIC_IGNORE_UNUSED_FUNCTION seems to expand
correctly to its respective pragma, but this doesn't seem to have an effect on
the warning. I tried to use the pragma explicitly and got the same result.
ATTRIBUTE_UNUSED works fine in this case if you put it in both functions,
which should fix warnings for both gdb and gdbserver builds.
The compiler version is gcc (Ubuntu 5.4.0-6ubuntu1~16.04.11) 5.4.0 20160609.
This is likely the result of PR64079 in GCC, which was fixed by commit
9e96f1e1b9731c4e1ef4fbbbf0997319973f0537.
To prevent other developers from attempting to use this macro, only to get
confused by it not working as expected, it seems better to not define this
particular macro.
gdb/ChangeLog:
2019-12-12 Luis Machado <luis.machado@linaro.org>
* gdbsupport/safe-strerror.c: Don't include diagnostics.h.
(select_strerror_r): Use ATTRIBUTE_UNUSED instead of the diagnostics
macros.
include/ChangeLog:
2019-12-12 Luis Machado <luis.machado@linaro.org>
* diagnostics.h (DIAGNOSTIC_IGNORE_UNUSED_FUNCTION). Remove
definitions.
Change-Id: Iad6123d61d76d111e3ef8d24aa8c60112304c749
Alan Modra
Alex Coplan
Anton Kolesov
Max Filippov
Fangrui Song
Stephen Casner
Jan W. Jagersma
Martin Liska
Nelson Chu
John Baldwin
Kamil Rytarowski
Christophe Lyon
Christian Eggers
Luis Machado
Andrew Burgess
Matthew Malcomson
Sergey Belyashov
Jon Turney
Nick Clifton
Andre Vieira
Jozef Lawrynowicz
Claudiu Zissulescu
Shahab Vahedi
Joel Brobecker