65f479b6ef
2012-05-30 Jeff Kenton <jkenton@tilera.com>
...
* Makefile.in (SFILES): Add linux-tile-low.c.
(linux-tile-low.o, reg-tilegx.o, reg-tilegx.c): New rules.
* configure.srv: Handle tilegx-*-linux*.
* linux-tile-low.c: New file.
2012-05-30 19:43:15 +00:00
4d47af5cf2
Enable x32 support in gdbserver
...
* Makefile.in (clean): Also remove x32.c x32-linux.c
x32-avx.c x32-avx-linux.c.
(x32.o): New target.
(x32.c): Likewise.
(x32-linux.o): Likewise.
(x32-linux.c): Likewise.
(x32-avx.o): Likewise.
(x32-avx.c): Likewise.
(x32-avx-linux.o): Likewise.
(x32-avx-linux.c): Likewise.
* configure.srv (srv_amd64_regobj): Add x32.o x32-avx.o.
(srv_amd64_linux_regobj): Add x32-linux.o x32-avx-linux.o.
(srv_i386_64bit_xmlfiles): Add i386/x32-core.xml.
(srv_amd64_xmlfiles): Add i386/x32.xml i386/x32-avx.xml.
(srv_amd64_linux_xmlfiles): Add i386/x32-linux.xml
i386/x32-avx-linux.xml.
* linux-x86-low.c (init_registers_x32_linux): New prototype.
(init_registers_x32_avx_linux): Likwise.
(x86_linux_update_xmltarget): Call init_registers_x32_linux
or init_registers_x32_avx_linux if linux_is_elf64 is false.
2012-04-13 14:39:41 +00:00
5f572decf9
gdb/
...
* Makefile.in (linux-ptrace.o): New.
* common/linux-procfs.c (linux_proc_pid_is_zombie): New,
from linux-nat.c.
* common/linux-procfs.h (linux_proc_pid_is_zombie): New declaration.
* common/linux-ptrace.c: New file.
* config/alpha/alpha-linux.mh (NATDEPFILES): Add linux-ptrace.o.
* config/arm/linux.mh: Likewise.
* config/i386/linux.mh: Likewise.
* config/i386/linux64.mh: Likewise.
* config/ia64/linux.mh: Likewise.
* config/m32r/linux.mh: Likewise.
* config/m68k/linux.mh: Likewise.
* config/mips/linux.mh: Likewise.
* config/pa/linux.mh: Likewise.
* config/powerpc/linux.mh: Likewise.
* config/powerpc/ppc64-linux.mh: Likewise.
* config/powerpc/spu-linux.mh: Likewise.
* config/s390/s390.mh: Likewise.
* config/sparc/linux.mh: Likewise.
* config/sparc/linux64.mh: Likewise.
* config/xtensa/linux.mh: Likewise.
* linux-nat.c (linux_lwp_is_zombie): Remove, move it to
common/linux-procfs.c.
(wait_lwp): Rename linux_lwp_is_zombie to linux_proc_pid_is_zombie.
gdb/gdbserver/
* Makefile.in (linux-ptrace.o): New.
* configure.srv (arm*-*-linux*, bfin-*-*linux*, crisv32-*-linux*)
(cris-*-linux*, i[34567]86-*-linux*, ia64-*-linux*, m32r*-*-linux*)
(m68*-*-linux*, m68*-*-uclinux*, mips*-*-linux*, powerpc*-*-linux*)
(s390*-*-linux*, sh*-*-linux*, sparc*-*-linux*, tic6x-*-uclinux)
(x86_64-*-linux*, xtensa*-*-linux*): Add linux-ptrace.o to SRV_TGTOBJ
of these targets.
* linux-low.c (linux_attach_lwp_1): Remove redundent else clause.
2012-03-13 15:00:37 +00:00
1faeff088b
gdb/
...
* features/mips-dsp.xml: New file.
* features/mips64-dsp.xml: New file.
* features/mips-dsp-linux.xml: New file.
* features/mips64-dsp-linux.xml: New file.
* features/Makefile (WHICH): Add mips-dsp-linux and
mips64-dsp-linux.
(mips-dsp-expedite, mips64-dsp-expedite): New variables.
* features/mips-dsp-linux.c: New file.
* features/mips64-dsp-linux.c: New file.
* regformats/mips-dsp-linux.dat: New file.
* regformats/mips64-dsp-linux.dat: New file.
* mips-linux-nat.c (mips_linux_register_addr): Handle DSP
registers.
(mips64_linux_register_addr): Likewise.
(mips64_linux_regsets_fetch_registers): Likewise.
(mips64_linux_regsets_store_registers): Likewise.
(mips64_linux_fetch_registers): Update call to
mips64_linux_regsets_fetch_registers.
(mips64_linux_store_registers): Update call to
mips64_linux_regsets_store_registers.
(mips_linux_read_description): Probe for DSP registers.
(_initialize_mips_linux_nat): Call initialize_tdesc_mips_dsp_linux
and initialize_tdesc_mips64_dsp_linux.
* mips-linux-tdep.c (supply_gregset, mips64_supply_gregset):
Remove padding of no longer used embedded register slots.
* mips-linux-tdep.h (DSP_BASE, DSP_CONTROL): New macros.
(MIPS_RESTART_REGNUM): Redefine enum value.
* mips-tdep.c (mips_generic_reg_names): Remove trailing null
strings.
(mips_tx39_reg_names): Likewise.
(mips_linux_reg_names): New array of register names for Linux
targets.
(mips_register_name): Check for a null pointer in
mips_processor_reg_names and return an empty string.
(mips_register_type): Exclude embedded registers for the IRIX
and Linux ABIs.
(mips_pseudo_register_type): Likewise. Use dynamic numbers to
refer to FP registers, LO, HI, BadVAddr, Cause and PC. Handle
DSP registers.
(mips_stab_reg_to_regnum): Handle DSP accumulators.
(mips_dwarf_dwarf2_ecoff_reg_to_regnum): Likewise.
(mips_gdbarch_init): Likewise. Initialize internal register
indices for the Linux ABI. Use dynamic numbers to refer to
registers, as applicable, while parsing the target description.
* mips-tdep.h (struct mips_regnum): Add dspacc/dspctl offsets.
gdb/doc/
* gdb.texinfo (MIPS Features): Add org.gnu.gdb.mips.dsp.
gdb/gdbserver/
* linux-low.h (linux_target_ops): Add regset_bitmap member.
* linux-low.c (use_linux_regsets): New macro.
[!HAVE_LINUX_REGSETS] (regsets_fetch_inferior_registers): Likewise.
[!HAVE_LINUX_REGSETS] (regsets_store_inferior_registers): Likewise.
(linux_register_in_regsets): New function.
(usr_fetch_inferior_registers): Skip registers covered by
regsets.
(usr_store_inferior_registers): Likewise.
(usr_fetch_inferior_registers): New macro.
(usr_store_inferior_registers): Likewise.
(linux_fetch_registers): Handle mixed regset/non-regset targets.
(linux_store_registers): Likewise.
* linux-mips-low.c (init_registers_mips_dsp_linux): New
prototype.
(init_registers_mips64_dsp_linux): Likewise.
(init_registers_mips_linux): New macro.
(init_registers_mips_dsp_linux): Likewise.
(mips_dsp_num_regs): Likewise.
(DSP_BASE, DSP_CONTROL): New fallback macros.
(mips_base_regs): New macro.
(mips_regmap): Use it. Fix the size.
(mips_dsp_regmap): New variable.
(mips_dsp_regset_bitmap): Likewise.
(mips_arch_setup): New function.
(mips_cannot_fetch_register): Use the_low_target.regmap rather
than mips_regmap.
(mips_cannot_store_register): Likewise.
(the_low_target): Update .arch_setup, .num_regs and .regmap
initializers. Add .regset_bitmap initializer.
* linux-arm-low.c (the_low_target): Add .regset_bitmap
initializer.
* linux-bfin-low.c (the_low_target): Likewise.
* linux-cris-low.c (the_low_target): Likewise.
* linux-crisv32-low.c (the_low_target): Likewise.
* linux-ia64-low.c (the_low_target): Likewise.
* linux-m32r-low.c (the_low_target): Likewise.
* linux-m68k-low.c (the_low_target): Likewise.
* linux-ppc-low.c (the_low_target): Likewise.
* linux-s390-low.c (the_low_target): Likewise.
* linux-sh-low.c (the_low_target): Likewise.
* linux-sparc-low.c (the_low_target): Likewise.
* linux-tic6x-low.c (the_low_target): Likewise.
* linux-x86-low.c (the_low_target): Likewise.
* linux-xtensa-low.c (the_low_target): Likewise.
* configure.srv <mips*-*-linux*>: Add mips-dsp-linux.o and
mips64-dsp-linux.o to srv_regobj. Add mips-dsp-linux.xml,
mips64-dsp-linux.xml, mips-dsp.xml and mips64-dsp.xml to
srv_xmlfiles.
* Makefile.in (mips-dsp-linux.o, mips-dsp-linux.c): New targets.
(mips64-dsp-linux.o, mips64-dsp-linux.c): Likewise.
gdb/testsuite/
* gdb.xml/tdesc-regs.exp: Add "mips-dsp.xml" to the list of MIPS
core registers.
2012-03-01 22:19:48 +00:00
c642a43456
ChangeLog:
...
* s390-tdep.h (S390_ORIG_R2_REGNUM): Define.
(S390_LAST_BREAK_REGNUM): Likewise.
(S390_SYSTEM_CALL_REGNUM): Likewise.
(S390_NUM_REGS): Update.
(s390_regmap_last_break): Add declaration.
(s390x_regmap_last_break): Likewise.
(s390_regmap_system_call): Likewise.
(tdesc_s390_linux32v1): Add declaration.
(tdesc_s390_linux32v2): Likewise.
(tdesc_s390_linux64v1): Likewise.
(tdesc_s390_linux64v2): Likewise.
(tdesc_s390x_linux64v1): Likewise.
(tdesc_s390x_linux64v2): Likewise.
* s390-tdep.c: Include new target description files
"features/s390-linux32v1.c", "features/s390-linux32v2.c",
"features/s390-linux64v1.c", "features/s390-linux64v2.c",
"features/s390x-linux64v1.c", and "features/s390x-linux64v2.c".
(s390_cannot_store_register): New function.
(s390_write_pc): Likewise.
(s390_dwarf_regmap): Add fields for new registers.
(s390_regmap_gregset): Likewise.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): Likewise.
(s390_regmap_last_break): New variable.
(s390x_regmap_last_break): Likewise.
(s390_regmap_system_call): Likewise.
(s390_last_break_regset): Likewise.
(s390x_last_break_regset): Likewise.
(s390_system_call_regset): Likewise.
(s390_upper_regset_sections): Rename to ...
(s390_linux64_regset_sections): ... this.
(s390_linux32_regset_sections): New variable.
(s390x_linux64_regset_sections): Likewise.
(s390_linux32v1_regset_sections): Likewise.
(s390_linux32v2_regset_sections): Likewise.
(s390_linux64v1_regset_sections): Likewise.
(s390_linux64v2_regset_sections): Likewise.
(s390x_linux64v1_regset_sections): Likewise.
(s390x_linux64v2_regset_sections): Likewise.
(s390_regset_from_core_section): Handle .reg-s390-last-break and
.reg-s390-system-call core file sections.
(s390_core_read_description): Check for presence of
.reg-s390-last-break and .reg-s390-system-call core file
sections and return appropriate target description.
(s390_gdbarch_init): Detect Linux-specific registers "orig_r2",
"last_break" and "system_call" in target description. Install
appropriate gdbarch_core_regset_sections array.
Call set_gdbarch_cannot_store_register and set_gdbarch_write_pc.
(_initialize_s390_tdep): Initialize additional target descriptions.
* s390-nat.c: Include "elf/common.h".
(PTRACE_GETREGSET, PTRACE_SETREGSET): Define if undefined.
(have_regset_last_break): New static variable.
(have_regset_system_call): Likewise.
(s390_native_supply): Handle S390_ORIG_R2_REGNUM.
(s390_native_collect): Likewise.
(fetch_regset, store_regset, check_regset): New functions.
(s390_linux_fetch_inferior_registers): Handle S390_LAST_BREAK_REGNUM
and S390_SYSTEM_CALL_REGNUM.
(s390_linux_store_inferior_registers): Likewise.
(s390_read_description): Check for presence of NT_S390_LAST_BREAK
and NT_S390_SYSTEM_CALL regsets and use appropriate description.
* features/Makefile (WHICH): Add s390-linux32v1, s390-linux64v1,
s390x-linux64v1, s390-linux32v2, s390-linux64v2, and s390x-linux64v2.
(s390-linux32v1-expedite): Define.
(s390-linux32v2-expedite): Likewise.
(s390-linux64v1-expedite): Likewise.
(s390-linux64v2-expedite): Likewise.
(s390x-linux64v1-expedite): Likewise.
(s390x-linux64v2-expedite): Likewise.
* features/s390-linux32.xml: Add orig_r2 register.
* features/s390-linux64.xml: Likewise.
* features/s390x-linux64.xml: Likewise.
* features/s390-linux32v1.xml: New file.
* features/s390-linux32v2.xml: Likewise.
* features/s390-linux64v1.xml: Likewise.
* features/s390-linux64v2.xml: Likewise.
* features/s390x-linux64v1.xml: Likewise.
* features/s390x-linux64v2.xml: Likewise.
* features/s390-linux32.c: Regenerate.
* features/s390-linux64.c: Likewise.
* features/s390x-linux64.c: Likewise.
* features/s390-linux32v1.c: New generated file.
* features/s390-linux32v2.c: Likewise.
* features/s390-linux64v1.c: Likewise.
* features/s390-linux64v2.c: Likewise.
* features/s390x-linux64v1.c: Likewise.
* features/s390x-linux64v2.c: Likewise.
* regformats/s390-linux32.dat: Regenerate.
* regformats/s390-linux64.dat: Regenerate.
* regformats/s390x-linux64.dat: Regenerate.
* regformats/s390-linux32v1.dat: New generated file.
* regformats/s390-linux32v2.dat: Likewise.
* regformats/s390-linux64v1.dat: Likewise.
* regformats/s390-linux64v2.dat: Likewise.
* regformats/s390x-linux64v1.dat: Likewise.
* regformats/s390x-linux64v2.dat: Likewise.
gdbserver/ChangeLog:
* Makefile.in (s390-linux32v1.o, s390-linux32v1.c): New rules.
(s390-linux32v2.o, s390-linux32v2.c): Likewise.
(s390-linux64v1.o, s390-linux64v1.c): Likewise.
(s390-linux64v2.o, s390-linux64v2.c): Likewise.
(s390x-linux64v1.o, s390x-linux64v1.c): Likewise.
(s390x-linux64v2.o, s390x-linux64v2.c): Likewise.
* configure.srv [s390*-*-linux*] (srv_regobj): Add new objects.
(srv_xmlfiles): Add new XML files.
* linux-s390-low.c: Include "elf/common.h", <sys/ptrace.h>,
and <sys/uio.h>.
(PTRACE_GETREGSET, PTRACE_SETREGSET): Define if undefined.
(init_registers_s390_linux32v1): Add prototype.
(init_registers_s390_linux32v2): Likewise.
(init_registers_s390_linux64v1): Likewise.
(init_registers_s390_linux64v2): Likewise.
(init_registers_s390x_linux64v1): Likewise.
(init_registers_s390x_linux64v2): Likewise.
(s390_num_regs): Increment to 52.
(s390_regmap): Add orig_r2 register.
(s390_num_regs_3264): Increment to 68.
(s390_regmap_3264): Add orig_r2 register.
(s390_collect_ptrace_register): Handle orig_r2 register.
(s390_supply_ptrace_register): Likewise.
(s390_fill_last_break): New function.
(s390_store_last_break): Likewise.
(s390_fill_system_call): New function.
(s390_store_system_call): Likewise.
(target_regsets): Handle NT_S390_LAST_BREAK and NT_S390_SYSTEM_CALL
register sets.
(s390_check_regset): New function.
(s390_arch_setup): Check for presence of NT_S390_LAST_BREAK and
NT_S390_SYSTEM_CALL regsets and use appropriate description.
Update target_regsets for available register sets.
testsuite/ChangeLog:
* gdb.base/callfuncs.exp (fetch_all_registers): Filter out read-only
last_break register on s390*-*-* targets.
2011-12-06 14:14:50 +00:00
13da1c9782
Move common linux procfs code to common/
2011-08-24 12:07:28 +00:00
58dbd54186
gdb/gdbserver/
...
* Makefile.in (clean): Remove tic6x-*.c files.
(linux-tic6x-low.o, tic6x-c62x-linux.o, tic6x-c64x-linux.o): New rules.
(tic6x-c64xp-linux.o, tic6x-c62x-linux.c, tic6x-c64x-linux.c): Likewise.
(tic6x-c64xp-linux.c): Likewise.
* configure.srv: Add support for tic6x-*-uclinux.
* linux-tic6x-low.c: New.
* linux-low.c (PT_TEXT_ADDR, PT_DATA_ADDR, PT_TEXT_END_ADDR): Define.
2011-08-14 15:25:45 +00:00
d26e3629bb
2011-07-22 Kwok Cheung Yeung <kcy@codesourcery.com>
...
gdb/
* defs.h: Add guard against inclusion in gdbserver.
(struct ptid, ptid_t): Move to common/ptid.h.
(xfree, xzalloc, xasprintf, xvasprintf, xstrprintf, xstrvprintf,
xsnprintf, internal_error): Move to common/common-utils.h.
(nomem): Delete.
* gdb_assert.h: Move into common/ sub-directory.
* gdb_locale.h: Ditto.
* gdb_dirent.h: Ditto.
* inferior.h (minus_one_ptid, null_ptid, ptid_build, pid_to_ptid,
ptid_get_pid, ptid_get_lwp, ptid_get_tid, ptid_equal, ptid_is_pid):
Move into common/ptid.h.
* xml-support.c (xml_escape_text): Move into common/xml-utils.c.
(gdb_xml_create_parser_and_cleanup_1, xml_fetch_context_from_file):
Change nomem to malloc_failure.
* xml-support.h (xml_escape_text): Move into common/xml-utils.h.
* utils.c (nomem): Rename to malloc_failure.
(xmalloc, xzalloc, xrealloc, xcalloc, xfree, xstrprintf, xasprintf,
xvasprintf, xstrvprintf, xsnprintf): Move to common/common-utils.c.
(gdb_buildargv): Change nomem to malloc_failure.
* infrun.c (null_ptid, minus_one_ptid, ptid_build, pid_to_ptid,
ptid_get_pid, ptid_get_lwp, ptid_get_tid, ptid_equal,
ptid_is_pid): Move into common/ptid.c.
(initialize_infrun): Delete initialization of null_ptid and
minus_one_ptid.
* linux-nat.c (linux_nat_xfer_osdata): Defer to
linux_common_xfer_osdata.
* Makefile.in (SFILES): Add common/common-utils.c, common/xml-utils.c,
common/ptid.c and common/buffer.c.
(HFILES_NO_SRCDIR): Add common/common-utils.h, common/xml-utils.h,
common/ptid.h, common/buffer.h and common/linux-osdata.h.
(COMMON_OBS): Add xml-utils.o, common-utils.o, buffer.o and ptid.o.
(common-utils.o, xml-utils.o, ptid.o, buffer.o, linux-osdata.o): New
rules.
* common/gdb_assert.h: New.
* common/gdb_dirent.h: New.
* common/gdb_locale.h: New.
* common/buffer.c: New.
* common/buffer.h: New.
* common/ptid.c: New.
* common/ptid.h: New.
* common/xml-utils.c: New.
* common/xml-utils.h: New.
* common/common-utils.c: New.
* common/common-utils.h: New.
* common/linux-osdata.c: New.
* common/linux-osdata.h: New.
* config/alpha/alpha-linux.mh (NATDEPFILES): Add linux-osdata.o.
* config/arm/linux.mh (NATDEPFILES): Ditto.
* config/i386/linux.mh (NATDEPFILES): Ditto.
* config/i386/linux64.mh (NATDEPFILES): Ditto.
* config/ia64/linux.mh (NATDEPFILES): Ditto.
* config/m32r/linux.mh (NATDEPFILES): Ditto.
* config/m68k/linux.mh (NATDEPFILES): Ditto.
* config/mips/linux.mh (NATDEPFILES): Ditto.
* config/pa/linux.mh (NATDEPFILES): Ditto.
* config/powerpc/linux.mh (NATDEPFILES): Ditto.
* config/powerpc/ppc64-linux.mh (NATDEPFILES): Ditto.
* config/s390/s390.mh (NATDEPFILES): Ditto.
* config/sparc/linux.mh (NATDEPFILES): Ditto.
* config/sparc/linux64.mh (NATDEPFILES): Ditto.
* config/xtensa/linux.mh (NATDEPFILES): Ditto.
gdbserver/
* linux-low.c (compare_ints, unique, list_threads, show_process,
linux_core_of_thread): Delete.
(linux_target_ops): Change linux_core_of_thread to
linux_common_core_of_thread.
(linux_qxfer_osdata): Defer to linux_common_xfer_osdata.
* utils.c (malloc_failure): Change type of argument.
(xmalloc, xrealloc, xcalloc, xsnprintf): Delete.
* Makefile.in (SFILES): Add common/common-utils.c, common/xml-utils.c,
common/linux-osdata.c, common/ptid.c and common/buffer.c.
(OBS): Add xml-utils.o, common-utils.o, ptid.o and buffer.o.
(IPA_OBJS): Add common-utils-ipa.o.
(ptid_h, linux_osdata_h): New macros.
(server_h): Add common/common-utils.h, common/xml-utils.h,
common/buffer.h, common/gdb_assert.h, common/gdb_locale.h and
common/ptid.h.
(common-utils-ipa.o, common-utils.o, xml-utils.o, linux-osdata.o,
ptid.o, buffer.o): New rules.
(linux-low.o): Add common/linux-osdata.h as a dependency.
* configure.srv (srv_tgtobj): Add linux-osdata.o to Linux targets.
* configure.ac: Add AC_HEADER_DIRENT check.
* config.in: Regenerate.
* configure: Regenerate.
* remote-utils.c (xml_escape_text): Delete.
(buffer_grow, buffer_free, buffer_init, buffer_finish,
buffer_xml_printf): Move to common/buffer.c.
* server.c (main): Remove call to initialize_inferiors.
* server.h (struct ptid, ptid_t, minus_one_ptid, null_ptid,
ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp, ptid_get_tid,
ptid_equal, ptid_is_pid, initialize_inferiors, xml_escape_text,
internal_error, gdb_assert, gdb_assert_fail): Delete.
(struct buffer, buffer_grow, buffer_free, buffer_init, buffer_finish,
buffer_xml_printf, buffer_grow_str, buffer_grow_str0): Move to
common/buffer.h.
* inferiors.c (null_ptid, minus_one_ptid, ptid_build, pid_to_ptid,
ptid_get_pid, ptid_get_lwp, ptid_get_tid, ptid_equal, ptid_is_pid,
initialize_inferiors): Delete.
2011-07-21 23:46:12 +00:00
4d393d60c4
gdb:
...
* configure.host (xscale*): Don't handle target.
* configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
handle targets.
gdb/gdbserver:
* README: Don't mention xscale*-*-linux*.
* configure.srv (xscale*-*-linux*): Don't handle target.
gdb/testsuite:
* gdb.base/a2-run.exp (strongarm-*-coff): Don't handle target.
* gdb.base/float.exp (xscale*-*-*, strongarm*-*-*): Don't handle
targets.
* gdb.base/long_long.exp (xscale*-*-*, strongarm*-*-*): Don't
handle targets.
sim:
* configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
handle targets.
* configure: Regenerate.
sim/testsuite:
* configure: Regenerate.
* sim/arm/allinsn.exp (xscale*-*-*): Don't handle target.
* sim/arm/misc.exp (thumb*-*-*, xscale*-*-*): Don't handle
targets.
* sim/arm/iwmmxt/iwmmxt.exp: Test for arm*-*-* instead of
xscale*-*-*.
* sim/arm/thumb/allthumb.exp (thumb*-*-*): Don't handle target.
* sim/arm/xscale/xscale.exp: Test for arm*-*-* instead of
xscale*-*-*.
2011-05-04 19:28:16 +00:00
eb826dc62c
gdbserver: bfin: new port
...
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-12-29 16:15:42 +00:00
fa1bd1e4fb
Add support for x86 LynxOS
...
This patch adds support for x86 LynxOS (tested on LynxOS 5.0).
gdb/gdbserver/ChangeLog:
* lynx-i386-low.c: New file.
* configure.srv: Add handling of i[34567]86-*-lynxos* targets.
2010-09-13 19:11:03 +00:00
8ed54b31b3
gdbserver support for powerpc-lynxos (4.x)
...
This patch adds support for powerpc-lynxos.
gdbserver/ChangeLog:
* gdbserver/lynx-low.c, gdbserver/lynx-low.h,
gdbserver/lynx-ppc-low.c: New files.
* Makefile.in (lynx_low_h): New variable.
(lynx-low.o, lynx-ppc-low.o): New rules.
* configure.ac: On LynxOS, link with -lnetinet.
* configure.srv: Add handling of powerpc-*-lynxos* targets.
* configure: regenerate.
2010-09-01 18:57:12 +00:00
fa593d66d5
gdb/gdbserver/
...
2010-06-01 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
* Makefile.in (IPA_DEPFILES, extra_libraries): New.
(all): Depend on $(extra_libraries).
(install-only): Install the IPA.
(IPA_OBJS, IPA_LIB): New.
(clean): Remove the IPA lib.
(IPAGENT_CFLAGS): New.
(tracepoint-ipa.o, utils-ipa.o, remote-utils-ipa.o)
(regcache-ipa.o, i386-linux-ipa.o, linux-i386-ipa.o)
(linux-amd64-ipa.o, amd64-linux-ipa.o): New rules.
* linux-amd64-ipa.c, linux-i386-ipa.c: New files.
* configure.ac: Check for atomic builtins support in the compiler.
(IPA_DEPFILES, extra_libraries): Define.
* configure.srv (ipa_obj): Add description.
(ipa_i386_linux_regobj, ipa_amd64_linux_regobj): Define.
(i[34567]86-*-linux*): Set ipa_obj.
(x86_64-*-linux*): Set ipa_obj.
* linux-low.c (stabilizing_threads): New.
(supports_fast_tracepoints): New.
(linux_detach): Stabilize threads before detaching.
(handle_tracepoints): Handle internal tracing breakpoints. Assert
the lwp is either not stabilizing, or is moving out of a jump pad.
(linux_fast_tracepoint_collecting): New.
(maybe_move_out_of_jump_pad): New.
(enqueue_one_deferred_signal): New.
(dequeue_one_deferred_signal): New.
(linux_wait_for_event_1): If moving out of a jump pad, defer
pending signals to later.
(linux_stabilize_threads): New.
(linux_wait_1): Check if threads need moving out of jump pads, and
do it if so.
(stuck_in_jump_pad_callback): New.
(move_out_of_jump_pad_callback): New.
(lwp_running): New.
(linux_resume_one_lwp): Handle moving out of jump pads.
(linux_set_resume_request): Dequeue deferred signals.
(need_step_over_p): Also step over fast tracepoint jumps.
(start_step_over): Also uninsert fast tracepoint jumps.
(finish_step_over): Also reinsert fast tracepoint jumps.
(linux_install_fast_tracepoint_jump): New.
(linux_target_ops): Install linux_stabilize_threads and
linux_install_fast_tracepoint_jump_pad.
* linux-low.h (linux_target_ops) <get_thread_area,
install_fast_tracepoint_jump_pad>: New fields.
(struct lwp_info) <collecting_fast_tracepoint,
pending_signals_to_report, exit_jump_pad_bkpt>: New fields.
(linux_get_thread_area): Declare.
* linux-x86-low.c (jump_insn): New.
(x86_get_thread_area): New.
(append_insns): New.
(push_opcode): New.
(amd64_install_fast_tracepoint_jump_pad): New.
(i386_install_fast_tracepoint_jump_pad): New.
(x86_install_fast_tracepoint_jump_pad): New.
(the_low_target): Install x86_get_thread_area and
x86_install_fast_tracepoint_jump_pad.
* mem-break.c (set_raw_breakpoint_at): Use read_inferior_memory.
(struct fast_tracepoint_jump): New.
(fast_tracepoint_jump_insn): New.
(fast_tracepoint_jump_shadow): New.
(find_fast_tracepoint_jump_at): New.
(fast_tracepoint_jump_here): New.
(delete_fast_tracepoint_jump): New.
(set_fast_tracepoint_jump): New.
(uninsert_fast_tracepoint_jumps_at): New.
(reinsert_fast_tracepoint_jumps_at): New.
(set_breakpoint_at): Use write_inferior_memory.
(uninsert_raw_breakpoint): Use write_inferior_memory.
(check_mem_read): Mask out fast tracepoint jumps.
(check_mem_write): Mask out fast tracepoint jumps.
* mem-break.h (struct fast_tracepoint_jump): Forward declare.
(set_fast_tracepoint_jump): Declare.
(delete_fast_tracepoint_jump)
(fast_tracepoint_jump_here, uninsert_fast_tracepoint_jumps_at)
(reinsert_fast_tracepoint_jumps_at): Declare.
* regcache.c: Don't compile many functions when building the
in-process agent library.
(init_register_cache) [IN_PROCESS_AGENT]: Don't allow allocating
the register buffer in the heap.
(free_register_cache): If the register buffer isn't owned by the
regcache, don't free it.
(set_register_cache) [IN_PROCESS_AGENT]: Don't re-alocate
pre-existing register caches.
* remote-utils.c (convert_int_to_ascii): Constify `from' parameter
type.
(convert_ascii_to_int): : Constify `from' parameter type.
(decode_M_packet, decode_X_packet): Replace the `to' parameter by
a `to_p' pointer to pointer parameter. If TO_P is NULL, malloc
the needed buffer in-place.
(relocate_instruction): New.
* server.c (handle_query) <qSymbols>: If the target supports
tracepoints, give it a chance of looking up symbols. Report
support for fast tracepoints.
(handle_status): Stabilize threads.
(process_serial_event): Adjust.
* server.h (struct fast_tracepoint_jump): Forward declare.
(struct process_info) <fast_tracepoint_jumps>: New field.
(convert_ascii_to_int, convert_int_to_ascii): Adjust.
(decode_X_packet, decode_M_packet): Adjust.
(relocate_instruction): Declare.
(in_process_agent_loaded): Declare.
(tracepoint_look_up_symbols): Declare.
(struct fast_tpoint_collect_status): Declare.
(fast_tracepoint_collecting): Declare.
(force_unlock_trace_buffer): Declare.
(handle_tracepoint_bkpts): Declare.
(initialize_low_tracepoint)
(supply_fast_tracepoint_registers) [IN_PROCESS_AGENT]: Declare.
* target.h (struct target_ops) <stabilize_threads,
install_fast_tracepoint_jump_pad>: New fields.
(stabilize_threads, install_fast_tracepoint_jump_pad): New.
* tracepoint.c [HAVE_MALLOC_H]: Include malloc.h.
[HAVE_STDINT_H]: Include stdint.h.
(trace_debug_1): Rename to ...
(trace_vdebug): ... this.
(trace_debug): Rename to ...
(trace_debug_1): ... this. Add `level' parameter.
(trace_debug): New.
(ATTR_USED, ATTR_NOINLINE): New.
(IP_AGENT_EXPORT): New.
(gdb_tp_heap_buffer, gdb_jump_pad_buffer, gdb_jump_pad_buffer_end)
(collecting, gdb_collect, stop_tracing, flush_trace_buffer)
(about_to_request_buffer_space, trace_buffer_is_full)
(stopping_tracepoint, expr_eval_result, error_tracepoint)
(tracepoints, tracing, trace_buffer_ctrl, trace_buffer_ctrl_curr)
(trace_buffer_lo, trace_buffer_hi, traceframe_read_count)
(traceframe_write_count, traceframes_created)
(trace_state_variables)
New renaming defines.
(struct ipa_sym_addresses): New.
(STRINGIZE_1, STRINGIZE, IPA_SYM): New.
(symbol_list): New.
(ipa_sym_addrs): New.
(all_tracepoint_symbols_looked_up): New.
(in_process_agent_loaded): New.
(write_e_ipa_not_loaded): New.
(maybe_write_ipa_not_loaded): New.
(tracepoint_look_up_symbols): New.
(debug_threads) [IN_PROCESS_AGENT]: New.
(read_inferior_memory) [IN_PROCESS_AGENT]: New.
(UNKNOWN_SIDE_EFFECTS): New.
(stop_tracing): New.
(flush_trace_buffer): New.
(stop_tracing_bkpt): New.
(flush_trace_buffer_bkpt): New.
(read_inferior_integer): New.
(read_inferior_uinteger): New.
(read_inferior_data_pointer): New.
(write_inferior_data_pointer): New.
(write_inferior_integer): New.
(write_inferior_uinteger): New.
(struct collect_static_trace_data_action): Delete.
(enum tracepoint_type): New.
(struct tracepoint) <type>: New field `type'.
<actions_str, step_actions, step_actions_str>: Only include in GDBserver.
<orig_size, obj_addr_on_target, adjusted_insn_addr>
<adjusted_insn_addr_end, jump_pad, jump_pad_end>: New fields.
(tracepoints): Use IP_AGENT_EXPORT.
(last_tracepoint): Don't include in the IPA.
(stopping_tracepoint): Use IP_AGENT_EXPORT.
(trace_buffer_is_full): Use IP_AGENT_EXPORT.
(alloced_trace_state_variables): New.
(trace_state_variables): Use IP_AGENT_EXPORT.
(traceframe_t): Delete unused variable.
(circular_trace_buffer): Don't include in the IPA.
(trace_buffer_start): Delete.
(struct trace_buffer_control): New.
(trace_buffer_free): Delete.
(struct ipa_trace_buffer_control): New.
(GDBSERVER_FLUSH_COUNT_MASK, GDBSERVER_FLUSH_COUNT_MASK_PREV)
(GDBSERVER_FLUSH_COUNT_MASK_CURR, GDBSERVER_UPDATED_FLUSH_COUNT_BIT):
New.
(trace_buffer_ctrl): New.
(TRACE_BUFFER_CTRL_CURR): New.
(trace_buffer_start, trace_buffer_free, trace_buffer_end_free):
Reimplement as macros.
(trace_buffer_wrap): Delete.
(traceframe_write_count, traceframe_read_count)
(traceframes_created, tracing): Use IP_AGENT_EXPORT.
(struct tracepoint_hit_ctx) <type>: New field.
(struct fast_tracepoint_ctx): New.
(memory_barrier): New.
(cmpxchg): New.
(record_tracepoint_error): Update atomically in the IPA.
(clear_inferior_trace_buffer): New.
(about_to_request_buffer_space): New.
(trace_buffer_alloc): Handle GDBserver and inferior simulatenous
updating the same buffer.
(add_tracepoint): Default the tracepoint's type to trap
tracepoint, and orig_size to -1.
(get_trace_state_variable) [IN_PROCESS_AGENT]: Handle allocated
internal variables.
(create_trace_state_variable): New parameter `gdb'. Handle it.
(clear_installed_tracepoints): Clear fast tracepoint jumps.
(cmd_qtdp): Handle fast tracepoints.
(cmd_qtdv): Adjust.
(max_jump_pad_size): New.
(gdb_jump_pad_head): New.
(get_jump_space_head): New.
(claim_jump_space): New.
(sort_tracepoints): New.
(MAX_JUMP_SIZE): New.
(cmd_qtstart): Handle fast tracepoints. Sync tracepoints with the
IPA.
(stop_tracing) [IN_PROCESS_AGENT]: Don't include the tdisconnected
support. Upload fast traceframes, and delete internal IPA
breakpoints.
(stop_tracing_handler): New.
(flush_trace_buffer_handler): New.
(cmd_qtstop): Upload fast tracepoints.
(response_tracepoint): Handle fast tracepoints.
(tracepoint_finished_step): Upload fast traceframes. Set the
tracepoint hit context's tracepoint type.
(handle_tracepoint_bkpts): New.
(tracepoint_was_hit): Set the tracepoint hit context's tracepoint
type. Add comment about fast tracepoints.
(collect_data_at_tracepoint) [IN_PROCESS_AGENT]: Don't access the
non-existing action_str field.
(get_context_regcache): Handle fast tracepoints.
(do_action_at_tracepoint) [!IN_PROCESS_AGENT]: Don't write the PC
to the regcache.
(fast_tracepoint_from_jump_pad_address): New.
(fast_tracepoint_from_ipa_tpoint_address): New.
(collecting_t): New.
(force_unlock_trace_buffer): New.
(fast_tracepoint_collecting): New.
(collecting): New.
(gdb_collect): New.
(write_inferior_data_ptr): New.
(target_tp_heap): New.
(target_malloc): New.
(download_agent_expr): New.
(UALIGN): New.
(download_tracepoints): New.
(download_trace_state_variables): New.
(upload_fast_traceframes): New.
(IPA_FIRST_TRACEFRAME): New.
(IPA_NEXT_TRACEFRAME_1): New.
(IPA_NEXT_TRACEFRAME): New.
[IN_PROCESS_AGENT]: Include sys/mman.h and fcntl.h.
[IN_PROCESS_AGENT] (gdb_tp_heap_buffer, gdb_jump_pad_buffer)
(gdb_jump_pad_buffer_end): New.
[IN_PROCESS_AGENT] (initialize_tracepoint_ftlib): New.
(initialize_tracepoint): Adjust.
[IN_PROCESS_AGENT]: Allocate the IPA heap, and jump pad scratch
buffer. Initialize the low module.
* utils.c (PREFIX, TOOLNAME): New.
(malloc_failure): Use PREFIX.
(error): In the IPA, an error causes an exit.
(fatal, warning): Use PREFIX.
(internal_error): Use TOOLNAME.
(NUMCELLS): Increase to 10.
* configure, config.in: Regenerate.
gdb/
2010-06-01 Pedro Alves <pedro@codesourcery.com>
* NEWS: Mention gdbserver fast tracepoints support.
gdb/doc/
2010-06-01 Pedro Alves <pedro@codesourcery.com>
* gdb.texinfo (Set Tracepoints): Mention tracepoints support in
gdbserver, and add cross reference.
(Tracepoints support in gdbserver): New subsection.
2010-06-01 13:20:52 +00:00
e0a61e099d
* configure.srv (x86_64-*-mingw*): New configuration for Windows
...
64-bit executables.
2010-04-20 00:19:35 +00:00
c481e77ec5
* configure.srv (srv_amd64_regobj): Replace `x86-64-avx.o' by
...
`amd64-avx.o'.
2010-04-19 14:08:05 +00:00
3a13a53b43
Support i386 without SSE.
...
gdb/
2010-04-08 H.J. Lu <hongjiu.lu@intel.com>
* i386-linux-nat.c (have_ptrace_getfpxregs): Initialize to -1
if HAVE_PTRACE_GETFPXREGS is defined.
(i386_linux_read_description): Set have_ptrace_getfpxregs and
have_ptrace_getregset to 0 if ptrace PTRACE_GETFPXREGS failed.
* i386-linux-tdep.c: Include "features/i386/i386-mmx-linux.c"
(i386_linux_core_read_description): Return tdesc_i386_mmx_linux
if .reg-xfp section doesn't exist.
(_initialize_i386_linux_tdep): Call initialize_tdesc_i386_mmx_linux.
* i386-linux-tdep.h (tdesc_i386_mmx_linux): New.
* i386-tdep.c: Include "features/i386/i386-mmx.c".
(i386_go32_init_abi): Set tdesc to tdesc_i386_mmx.
(i386_validate_tdesc_p): Make org.gnu.gdb.i386.sse optional. Set
xcr0 to I386_XSTATE_X87_MASK if SSE isn't available.
(i386_gdbarch_init): Update comments.
(_initialize_i386_tdep): Call initialize_tdesc_i386_mmx.
* common/i386-xstate.h (I386_XSTATE_X87_MASK): New.
* config/djgpp/fnchange.lst: Add i386 MMX XML files.
* features/Makefile (i386/i386-mmx-expedite): New.
(i386/i386-mmx-linux-expedite): Likewise.
($(outdir)/i386/i386-mmx.dat): Likewise.
($(outdir)/i386/i386-mmx-linux.dat): Likewise.
* features/i386/i386-mmx-linux.c: New.
* features/i386/i386-mmx-linux.xml: Likewise.
* features/i386/i386-mmx.c: Likewise.
* features/i386/i386-mmx.xml: Likewise.
* regformats/i386/i386-mmx-linux.dat: Likewise.
* regformats/i386/i386-mmx.dat: Likewise.
* features/Makefile (WHICH): Add i386/i386-mmx and
i386/i386-mmx-linux.
gdb/doc/
2010-04-08 H.J. Lu <hongjiu.lu@intel.com>
* gdb.texinfo (i386 Features): Make org.gnu.gdb.i386.avx
optional. Make org.gnu.gdb.i386.avx requires
org.gnu.gdb.i386.avx.
gdb/gdbserver/
2010-04-08 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.in (clean): Also remove i386-mmx.c i386-mmx-linux.c.
(i386-mmx.o): New.
(i386-mmx.c): Likewise.
(i386-mmx-linux.o): Likewise.
(i386-mmx-linux.c): Likewise.
* configure.srv (srv_i386_regobj): Add i386-mmx.o.
(srv_i386_linux_regobj): Add i386-mmx-linux.o.
(srv_i386_xmlfiles): Add i386/i386-mmx.xml.
(srv_i386_linux_xmlfiles): Add i386/i386-mmx-linux.xml.
* linux-x86-low.c (init_registers_i386_mmx_linux): New.
(x86_linux_update_xmltarget): Call init_registers_i386_mmx_linux
and return if ptrace PTRACE_GETFPXREGS failed in 32bit.
2010-04-08 22:32:38 +00:00
1570b33e44
Add x86 AVX support to gdbserver.
...
2010-04-07 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.in (clean): Updated.
(i386-avx.o): New.
(i386-avx.c): Likewise.
(i386-avx-linux.o): Likewise.
(i386-avx-linux.c): Likewise.
(amd64-avx.o): Likewise.
(amd64-avx.c): Likewise.
(amd64-avx-linux.o): Likewise.
(amd64-avx-linux.c): Likewise.
* configure.srv (srv_i386_regobj): Add i386-avx.o.
(srv_i386_linux_regobj): Add i386-avx-linux.o.
(srv_amd64_regobj): Add amd64-avx.o.
(srv_amd64_linux_regobj): Add amd64-avx-linux.o.
(srv_i386_32bit_xmlfiles): Add i386/32bit-avx.xml.
(srv_i386_64bit_xmlfiles): Add i386/64bit-avx.xml.
(srv_i386_xmlfiles): Add i386/i386-avx.xml.
(srv_amd64_xmlfiles): Add i386/amd64-avx.xml.
(srv_i386_linux_xmlfiles): Add i386/i386-avx-linux.xml.
(srv_amd64_linux_xmlfiles): Add i386/amd64-avx-linux.xml.
* i387-fp.c: Include "i386-xstate.h".
(i387_xsave): New.
(i387_cache_to_xsave): Likewise.
(i387_xsave_to_cache): Likewise.
(x86_xcr0): Likewise.
* i387-fp.h (i387_cache_to_xsave): Likewise.
(i387_xsave_to_cache): Likewise.
(x86_xcr0): Likewise.
* linux-arm-low.c (target_regsets): Initialize nt_type to 0.
* linux-crisv32-low.c (target_regsets): Likewise.
* linux-m68k-low.c (target_regsets): Likewise.
* linux-mips-low.c (target_regsets): Likewise.
* linux-ppc-low.c (target_regsets): Likewise.
* linux-s390-low.c (target_regsets): Likewise.
* linux-sh-low.c (target_regsets): Likewise.
* linux-sparc-low.c (target_regsets): Likewise.
* linux-xtensa-low.c (target_regsets): Likewise.
* linux-low.c: Include <sys/uio.h>.
(regsets_fetch_inferior_registers): Support nt_type.
(regsets_store_inferior_registers): Likewise.
(linux_process_qsupported): New.
(linux_target_ops): Add linux_process_qsupported.
* linux-low.h (regset_info): Add nt_type.
(linux_target_ops): Add process_qsupported.
* linux-x86-low.c: Include "i386-xstate.h", "elf/common.h"
and <sys/uio.h>.
(init_registers_i386_avx_linux): New.
(init_registers_amd64_avx_linux): Likewise.
(xmltarget_i386_linux_no_xml): Likewise.
(xmltarget_amd64_linux_no_xml): Likewise.
(PTRACE_GETREGSET): Likewise.
(PTRACE_SETREGSET): Likewise.
(x86_fill_xstateregset): Likewise.
(x86_store_xstateregset): Likewise.
(use_xml): Likewise.
(x86_linux_update_xmltarget): Likewise.
(x86_linux_process_qsupported): Likewise.
(target_regsets): Add NT_X86_XSTATE entry and Initialize nt_type.
(x86_arch_setup): Don't call init_registers_amd64_linux nor
init_registers_i386_linux here. Call
x86_linux_update_xmltarget.
(the_low_target): Add x86_linux_process_qsupported.
* server.c (handle_query): Call target_process_qsupported.
* target.h (target_ops): Add process_qsupported.
(target_process_qsupported): New.
2010-04-07 18:49:46 +00:00
64daa791ab
* configure.srv: Fix typo setting srv_regobj.
2010-03-15 16:35:29 +00:00
90884b2b1f
Enable XML target descriptions for x86.
...
gdb/
2010-03-01 H.J. Lu <hongjiu.lu@intel.com>
* amd64-linux-nat.c (AMD64_LINUX_USER64_CS): New.
(amd64_linux_read_description): Likewise.
(_initialize_amd64_linux_nat): Set to_read_description to
amd64_linux_read_description.
* amd64-linux-tdep.c: Include "features/i386/amd64-linux.c".
(amd64_linux_register_name): Removed.
(amd64_linux_register_type): Likewise.
(amd64_linux_core_read_description): New.
(amd64_linux_init_abi): Set target description to
tdesc_amd64_linux if needed. Support orig_rax in target
description. Don't call set_gdbarch_register_name nor
set_gdbarch_register_type. Call
set_gdbarch_core_read_description.
(_initialize_amd64_linux_tdep): Call
initialize_tdesc_amd64_linux.
* amd64-linux-tdep.h (tdesc_amd64_linux): New.
* amd64-tdep.c: Include "features/i386/amd64.c".
(amd64_register_names): Removed.
(amd64_register_name): Likewise.
(amd64_register_type): Likewise.
(amd64_init_abi): Set num_core_regs and register_names. Set
target description to tdesc_amd64 if needed. Don't call
set_gdbarch_register_name nor set_gdbarch_register_type.
(_initialize_amd64_tdep): New.
* i386-linux-nat.c (i386_linux_read_description): New.
(_initialize_i386_linux_nat): Set to_read_description to
i386_linux_read_description.
* i386-linux-tdep.c: Include "features/i386/i386-linux.c".
(i386_linux_register_name): Removed.
(i386_linux_core_read_description): New.
(i386_linux_read_description): Likewise.
(i386_linux_init_abi): Don't call set_gdbarch_register_name.
Set target description to tdesc_i386_linux if needed. Support
orig_eax. Set register_reggroup_p. Call
set_gdbarch_core_read_description.
(_initialize_i386_linux_tdep): Call initialize_tdesc_i386_linux.
* i386-linux-tdep.h (tdesc_i386_linux): New.
* i386-nto-tdep.c (i386nto_regset_id): Replace I386_NUM_FREGS
with I387_NUM_REGS.
* i386-tdep.c: Include "features/i386/i386.c".
(i386_register_names): Make it const.
(i386_mmx_names): Likewise.
(i386_num_register_names): Removed.
(i386_register_name): Likewise.
(i386_eflags_type): Likewise.
(i386_mxcsr_type): Likewise.
(i386_sse_type): Likewise.
(i386_register_type): Likewise.
(i387_ext_type): Call tdesc_find_type instead of arch_float_type.
(i386_pseudo_register_name): New.
(i386_pseudo_register_type): Likewise.
(i386_mmx_type): Make it static.
(i386_gdbarch_init): Check arch. Replace I386_NUM_FREGS with
I387_NUM_REGS. Set num_core_regs and register_names. Don't
call set_gdbarch_register_name nor set_gdbarch_register_type.
Set register_reggroup_p. Set target description to tdesc_i386
if needed. Call set_tdesc_pseudo_register_type,
set_tdesc_pseudo_register_name and tdesc_use_registers.
(_initialize_i386_tdep): Call initialize_tdesc_i386.
initialize_tdesc_x86_64.
* i386-tdep.h (gdbarch_tdep): Remove i386_eflags_type,
i386_mxcsr_type and i386_sse_type. Add num_core_regs,
register_names, tdesc and register_reggroup_p.
(I386_NUM_FREGS): Removed.
(i386_eflags_type): Likewise.
(i386_mxcsr_type): Likewise.
(i386_mmx_type): Likewise.
(i386_sse_type): Likewise.
(i386_register_name): Likewise.
(i386_regnum): Add I386_MXCSR_REGNUM.
(I386_SSE_NUM_REGS): Defined with I386_MXCSR_REGNUM.
* i387-tdep.h (I387_NUM_REGS): New.
* regformats/i386/i386-linux.dat: Generated.
* regformats/i386/i386.dat: Likewise.
* regformats/i386/amd64-linux.dat: Likewise.
* regformats/i386/amd64.dat: Likewise.
* regformats/reg-i386-linux.dat: Removed.
* regformats/reg-i386.dat: Likewise.
* regformats/reg-x86-64-linux.dat: Likewise.
* regformats/reg-x86-64.dat: Likewise.
gdb/gdbserver/
2010-03-01 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.in (clean): Replace reg-i386.c, reg-x86-64.c,
reg-i386-linux.c and reg-x86-64-linux.c with i386.c, amd64.c,
i386-linux.c and amd64-linux.c.
(reg-i386.o): Removed.
(reg-i386.c): Likewise.
(reg-i386-linux.o): Likewise.
(reg-i386-linux.c): Likewise.
(reg-x86-64.o): Likewise.
(reg-x86-64.c): Likewise.
(reg-x86-64-linux.o): Likewise.
(reg-x86-64-linux.c): Likewise.
(i386.o): New.
(i386.c): Likewise.
(i386-linux.o): Likewise.
(i386-linux.c): Likewise.
(amd64.o): Likewise.
(amd64.c): Likewise.
(amd64-linux.o): Likewise.
(amd64-linux.c): Likewise.
* configure.srv (srv_i386_regobj): New.
(srv_i386_linux_regobj): Likewise.
(srv_amd64_regobj): Likewise.
(srv_amd64_linux_regobj): Likewise.
(srv_i386_32bit_xmlfiles): Likewise.
(srv_i386_64bit_xmlfiles): Likewise.
(srv_i386_xmlfiles): Likewise.
(srv_amd64_xmlfiles): Likewise.
(srv_i386_linux_xmlfiles): Likewise.
(srv_amd64_linux_xmlfiles): Likewise.
(i[34567]86-*-cygwin*): Set srv_regobj to $srv_i386_regobj. Set
srv_xmlfiles to $srv_i386_xmlfiles.
(i[34567]86-*-mingw32ce*): Likewise.
(i[34567]86-*-mingw*): Likewise.
(i[34567]86-*-nto*): Likewise.
(i[34567]86-*-linux*): Set srv_regobj to $srv_i386_linux_regobj
and $srv_amd64_linux_regobj. Set srv_xmlfiles to
$srv_i386_linux_xmlfiles and $srv_amd64_linux_xmlfiles.
(x86_64-*-linux*): Likewise.
* linux-x86-low.c (init_registers_x86_64_linux): Removed.
(init_registers_amd64_linux): New.
(x86_arch_setup): Replace init_registers_x86_64_linux with
init_registers_amd64_linux.
gdb/testsuite/
2010-03-01 H.J. Lu <hongjiu.lu@intel.com>
* gdb.xml/tdesc-regs.exp (architecture): New. Set it for x86.
(load_description): Set architecture if defined.
2010-03-01 15:33:32 +00:00
7803799a0f
* features/Makefile (WHICH): Add s390-linux32, s390-linux64,
...
and s390x-linux64.
(s390-linux32-expedite): Define.
(s390-linux64-expedite): Define.
(s390x-linux64-expedite): Define.
* features/s390-acr.xml: New file.
* features/s390-fpr.xml: New file.
* features/s390-core32.xml: New file.
* features/s390-core64.xml: New file.
* features/s390x-core64.xml: New file.
* features/s390-linux32.xml: New file.
* features/s390-linux64.xml: New file.
* features/s390x-linux64.xml: New file.
* features/s390-linux32.c: New generated file.
* features/s390-linux64.c: New generated file.
* features/s390x-linux64.c: New generated file.
* regformats/s390-linux32.dat: New generated file.
* regformats/s390-linux64.dat: New generated file.
* regformats/s390x-linux64.dat: New generated file.
* regformats/reg-s390.dat: Remove.
* regformats/reg-s390x.dat: Remove.
* s390-nat.c: Include "auxv.h" and <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(s390_target_wordsize): New function.
(s390_auxv_parse): Likewise.
(s390_get_hwcap): Likewise.
(s390_read_description): Likewise.
(_initialize_s390_nat): Install s390_auxv_parse and
s390_read_description.
* s390-tdep.c: Include "features/s390-linux32.c",
"features/s390-linux64.c", and "features/s390x-linux64.c".
(struct gdbarch_tdep): Add gpr_full_regnum, pc_regnum, and cc_regnum.
(s390_register_call_saved): New function.
(s390_register_name): Remove.
(s390_register_type): Remove.
(s390_dwarf_regmap): Add lower half GPR pseudo DWARF CFI regnums.
(s390_dwarf_reg_to_regnum): Remap GPR regnums to full GPRs.
(s390_adjust_frame_regnum): Remap GPR regnums to lower halves for CFI.
(s390_pseudo_register_name): New function.
(s390_pseudo_register_type): New function.
(s390_pseudo_register_read): Handle both 32-bit and 64-bit cases.
Handle full GPR pesudos and varying pseudo register numbers.
(s390_pseudo_register_write): Likewise
(s390x_pseudo_register_read): Remove.
(s390x_pseudo_register_write): Likewise.
(s390_register_group): Remove.
(s390_pseudo_register_group): New function.
(s390_regmap_gregset): Add GPR upper halves.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): New global variable.
(s390_upper_regset): New global variable.
(s390_upper_regset_sections): New global variable.
(s390_regset_from_core_section): Handle GPR upper halves.
(s390_core_read_description): New function.
(s390_prologue_frame_unwind_cache): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_prev_register): Unwind full GPRs to show lower halves.
(s390_stub_frame_unwind_cache): Handle varying pseudo register numbers.
(s390_sigtramp_frame_unwind_cache): Unwind PSWM and PSWA as well as
PC and CC pseudos. Unwind upper halves and full GPRs as appropriate.
Handle varying pseudo register numbers.
(s390_unwind_pc): Handle varying pseudo register numbers.
(s390_dwarf2_prev_register): New function.
(s390_dwarf2_frame_init_reg): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
Install s390_dwarf2_prev_register to unwind full GPRs.
(s390_gdbarch_init): Handle target descriptions. Assign varying
pseudo register numbers. Install s390_adjust_frame_regnum.
(_initialize_s390_tdep): Initialize target descriptions.
* s390-tdep.h (S390_R0_UPPER_REGNUM .. S390_R15_UPPER_REGNUM): Define.
(S390_NUM_REGS): Redefine to include upper half registers.
(S390_PC_REGNUM, S390_CC_REGNUM): Remove.
(S390_NUM_PSEUDO_REGS, S390_NUM_TOTAL_REGS): Likewise.
(tdesc_s390_linux32): Add declaration.
(tdesc_s390_linux64): Likewise.
(tdesc_s390x_linux64): Likewise.
gdb/testsuite/
* gdb.xml/tdesc-regs.exp: Support s390*-*-* targets.
gdbserver/
* Makefile.in (clean): Remove new generated files.
(reg-s390.o, reg-s390.c): Remove rules.
(reg-s390x.o, reg-s390x.c): Likewise.
(s390-linux32.o, s390-linux32.c): Add rules.
(s390-linux64.o, s390-linux64.c): Likewise.
(s390x-linux64.o, s390x-linux64.c): Likewise.
* configure.srv (s390*-*-linux*): Update srv_regobj and srv_xmlfiles.
* linux-s390-low.c: Include <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(init_registers_s390): Remove prototype.
(init_registers_s390x): Likewise.
(init_registers_s390_linux32): Add prototype.
(init_registers_s390_linux64): Likewise.
(init_registers_s390x_linux64): Likewise.
(s390_num_regs_3264): New define.
(s390_regmap_3264): New global variable.
(s390_cannot_fetch_register): Remove obsolete check.
(s390_cannot_store_register): Likewise.
(s390_collect_ptrace_register): Handle upper/lower register halves.
(s390_supply_ptrace_register): Likewise.
(s390_fill_gregset): Update to register number changes.
(s390_get_hwcap): New routine.
(s390_arch_setup): Detect 32-bit process running on 64-bit system.
Install appropriate regmap and register set.
2010-01-04 15:03:01 +00:00
9ac544cece
2009-11-17 Nathan Sidwell <nathan@codesourcery.com>
...
2009-11-17 Vladimir Prus <vladimir@codesourcery.com>
* Makefile.in (reg-cf.o, reg-cf.c): New targets.
* configure.ac: Check for __mcoldfire__ and set
gdb_cv_m68k_is_coldfire.
* configure.srv: Use gdb_cv_m68k_is_coldfire to select between
reg-cf.o and reg-m68k.o.
* configure: Regenerated.
2009-11-17 Nathan Sidwell <nathan@codesourcery.com>
* regformats/reg-cf.dat: New file.
2009-11-17 17:58:15 +00:00
8838b45ede
* configure.ac (i[34567]86-*): Check if we're targetting x86-64
...
with an i686 compiler.
* configure.srv (i[34567]86-*-linux*): Pull in x86-64 handling if
needed.
* configure: Rebuilt.
2009-11-03 09:33:18 +00:00
f4d9badee6
ChangeLog:
...
* features/Makefile: Allow sub-platform specific expedite settings.
(WHICH): Add rs6000/powerpc-cell32l and rs6000/powerpc-cell64l.
(rs6000/powerpc-cell32l-expedite): Define.
(rs6000/powerpc-cell64l-expedite): Likewise.
* features/rs6000/powerpc-cell32l.xml: New file.
* features/rs6000/powerpc-cell64l.xml: New file.
* features/rs6000/powerpc-cell32l.c: New generated file.
* features/rs6000/powerpc-cell64l.c: New generated file.
* regformats/rs6000/powerpc-cell32l.dat: New generated file.
* regformats/rs6000/powerpc-cell64l.dat: New generated file.
* config/djgpp/fnchange.lst: Add mappings for new files.
* ppc-linux-tdep.h (tdesc_powerpc_cell32l): Add prototype.
(tdesc_powerpc_cell64l): Likewise.
* ppc-linux-tdep.c: Include "features/rs6000/powerpc-cell32l.c"
and "features/rs6000/powerpc-cell64l.c".
(_initialize_ppc_linux_tdep): Initialize target descriptions.
(ppc_linux_spu_section): New function.
(ppc_linux_core_read_description): Detect Cell/B.E. core files.
* ppc-linux-nat.c (PPC_FEATURE_CELL): Define.
(ppc_linux_read_description): Detect Cell/B.E. architecture.
* rs6000-tdep.c (rs6000_gdbarch_init): Do not trust BFD wordsize
if exec file is not PowerPC architecture.
gdbserver/ChangeLog:
* configure.srv (powerpc*-*-linux*): Add powerpc-cell32l.o
and powerpc-cell64l.o to srv_regobj. Add rs6000/powerpc-cell32l.xml
and rs6000/powerpc-cell64l.xml to srv_xmlfiles.
* Makefile.in (powerpc-cell32l.o, powerpc-cell32l.c): New rules.
(powerpc-cell64l.o, powerpc-cell64l.c): Likewise.
(clean): Handle powerpc-cell32l.c and powerpc-cell64l.c.
* linux-ppc-low.c (PPC_FEATURE_CELL): Define.
(init_registers_powerpc_cell32l): Add prototype.
(init_registers_powerpc_cell64l): Likewise.
(ppc_arch_setup): Detect Cell/B.E. architecture.
2009-07-31 15:23:21 +00:00
58d6951de5
* NEWS: Mention ARM VFP support.
...
* target-descriptions.c (tdesc_register_type): Make public.
(tdesc_unnumbered_register): New function.
(tdesc_register_reggroup_p): Allow missing
pseudo_register_reggroup_p.
* target-descriptions.h (tdesc_register_type): Declare.
(tdesc_unnumbered_register): Declare.
* arm-tdep.c (arm_neon_quad_read, arm_neon_quad_write): New functions.
(arm_push_dummy_call): Use arm_neon_quad_write.
(arm_neon_double_type, arm_neon_quad_type): New functions.
(arm_register_type): Handle VFP and NEON registers. Override the
types of double-precision registers for NEON. Disable FPA registers
if they are not present.
(arm_dwarf_reg_to_regnum): Add current VFP and NEON register numbers.
(arm_return_value): Use arm_neon_quad_write and arm_neon_quad_read.
(arm_register_name): Handle VFP single and NEON quad registers.
(arm_pseudo_read, arm_pseudo_write): New functions.
(arm_gdbarch_init): Check for VFP and NEON in the target description.
Assign numbers to double-precision registers. Register VFP and NEON
pseudo registers. Remove a shadowed "i" variable.
* arm-tdep.h (enum gdb_regnum): Add ARM_D0_REGNUM and
ARM_D31_REGNUM.
(struct gdbarch_tdep): Add have_neon_pseudos, have_neon,
have_vfp_registers, have_vfp_pseudos, neon_double_type,
and neon_quad_type.
* features/Makefile: Make expedite settings only architecture
specific.
(WHICH): Add new ARM descriptions.
* features/arm-with-neon.xml, features/arm-with-vfpv2.c,
features/arm-with-vfpv3.c, features/arm-vfpv2.xml,
features/arm-vfpv3.xml, features/arm-with-vfpv2.xml,
features/arm-with-vfpv3.xml, features/arm-with-neon.c: New files.
* regformats/arm-with-neon.dat, regformats/arm-with-vfpv2.dat,
regformats/arm-with-vfpv3.dat: Generate.
doc/
* gdb.texinfo (ARM Features): Document org.gnu.gdb.arm.vfp and
org.gnu.gdb.arm.neon.
gdbserver/
* linux-low.c (linux_write_memory): Update debugging output.
* Makefile.in (clean): Add new descriptions.
(arm-with-vfpv2.o, arm-with-vfpv2.c, arm-with-vfpv3.o)
(arm-with-vfpv3.c, arm-with-neon.o, arm-with-neon.c): New rules.
* configure.srv: Add new files for arm*-*-linux*.
* linux-arm-low.c: Add new declarations.
(PTRACE_GETVFPREGS, PTRACE_SETVFPREGS): Define if undefined.
(arm_hwcap, HWCAP_VFP, HWCAP_IWMMXT, HWCAP_NEON, HWCAP_VFPv3)
(HWCAP_VFPv3D16): New.
(arm_fill_wmmxregset, arm_store_wmmxregset): Check HWCAP_IWMMXT
instead of __IWMMXT__.
(arm_fill_vfpregset, arm_store_vfpregset, arm_get_hwcap)
(arm_arch_setup): New.
(target_regsets): Remove #ifdef. Add VFP regset.
(the_low_target): Use arm_arch_setup.
testsuite/
* gdb.base/float.exp: Handle VFP registers.
2009-07-28 18:26:51 +00:00
ac8c974e4f
Adding Neutrino gdbserver.
...
* configure: Regenerated.
* configure.ac: Add case for srv_qnx and set LIBS accordingly.
* configure.srv (i[34567]86-*-nto*): New target.
* nto-low.c, nto-low.h, nto-x86-low.c: New files.
* remote-utils.c [__QNX__]: Include sys/iomgr.h
(nto_comctrl) [__QNX__]: New function.
(enable_async_io, disable_async_io) [__QNX__]: Call nto_comctrl.
2009-07-06 18:31:20 +00:00
7437790a92
* configure.srv (i[34567]86-*-mingw32ce*): Add i386-low.o to
...
srv_tgtobj.
2009-07-05 19:30:09 +00:00
aa5ca48fad
Add h/w watchpoint support to x86-linux, win32-i386.
...
* Makefile.in (SFILES): Add i386-low.c
(i386_low_h): Define.
(i386-low.o): Add dependencies.
(linux-x86-low.o): Add i386-low.h dependency.
(win32-i386-low.o): Ditto.
* i386-low.c: New file.
* i386-low.h: New file.
* configure.srv (i[34567]86-*-cygwin*): Add i386-low.o to srv_tgtobj.
(i[34567]86-*-linux*, i[34567]86-*-mingw*, x86_64-*-linux*): Ditto.
* linux-low.c (linux_add_process): Initialize arch_private.
(linux_remove_process): Free arch_private.
(add_lwp): Initialize arch_private.
(delete_lwp): Free arch_private.
(linux_resume_one_lwp): Call the_low_target.prepare_to_resume if
provided.
* linux-low.h (process_info_private): New member arch_private.
(lwp_info): New member arch_private.
(linux_target_ops): New members new_process, new_thread,
prepare_to_resume.
(ptid_of): New macro.
* linux-x86-low.c: Include stddef.h, i386-low.h.
(arch_process_info): New struct.
(arch_lwp_info): New struct.
(x86_linux_dr_get, x86_linux_dr_set): New functions.
(i386_dr_low_set_addr, i386_dr_low_set_control): New functions.
(i386_dr_low_get_status): New function.
(x86_insert_point, x86_remove_point): New functions.
(x86_stopped_by_watchpoint): New function.
(x86_stopped_data_address): New function.
(x86_linux_new_process, x86_linux_new_thread): New functions.
(x86_linux_prepare_to_resume): New function.
(the_low_target): Add entries for insert_point, remove_point,
stopped_by_watchpoint, stopped_data_address, new_process, new_thread,
prepare_to_resume.
* server.c (debug_hw_points): New global.
(monitor_show_help): Document set debug-hw-points.
(handle_query): Process "set debug-hw-points".
* server.h (debug_hw_points): Declare.
(paddress): Declare.
* utils.c (NUMCELLS, CELLSIZE): New macros.
(get_sell, xsnprintf, paddress): New functions.
* win32-arm-low.c (the_low_target): Add entries for insert_point,
remove_point, stopped_by_watchpoint, stopped_data_address.
* win32-i386-low.c: Include i386-low.h.
(debug_reg_state): Replaces dr.
(i386_dr_low_set_addr, i386_dr_low_set_control): New functions.
(i386_dr_low_get_status): New function.
(i386_insert_point, i386_remove_point): New functions.
(i386_stopped_by_watchpoint): New function.
(i386_stopped_data_address): New function.
(i386_initial_stuff): Update.
(get_thread_context,set_thread_context,i386_thread_added): Update.
(the_low_target): Add entries for insert_point,
remove_point, stopped_by_watchpoint, stopped_data_address.
* win32-low.c (win32_insert_watchpoint): New function.
(win32_remove_watchpoint): New function.
(win32_stopped_by_watchpoint): New function.
(win32_stopped_data_address): New function.
(win32_target_ops): Add entries for insert_watchpoint,
remove_watchpoint, stopped_by_watchpoint, stopped_data_address.
* win32-low.h (win32_target_ops): New members insert_point,
remove_point, stopped_by_watchpoint, stopped_data_address.
2009-06-30 16:35:25 +00:00
d0722149ad
Biarch support for i386/amd64 gdbserver.
...
* Makefile.in (SFILES): Remove linux-i386-low.c, linux-x86-64-low.c.
Add linux-x86-low.c.
(linux-i386-low.o, linux-x86-64-low.o): Delete.
(linux-x86-low.o): Add.
* linux-x86-64-low.c: Delete.
* linux-i386-low.c: Delete.
* linux-x86-low.c: New file.
* configure.srv (i?86-linux srv_tgtobj): Replace linux-i386-low.o with
linux-x86-low.o.
(x86_64-linux srv_tgtobj): Replace linux-x86-64-low.o with
linux-x86-low.o.
(x86_64-linux srv_regobj): Add reg-i386-linux.o.
* linux-low.c: Include ansidecl.h, elf/common.h, elf/external.h.
(linux_child_pid_to_exec_file): New function.
(elf_64_header_p, elf_64_file_p): New functions.
(siginfo_fixup): New function.
(linux_xfer_siginfo): New local inf_siginfo. Call siginfo_fixup to
give target a chance to convert layout.
* linux-low.h (linux_target_ops): New member siginfo_fixup.
(linux_child_pid_to_exec_file, elf_64_file_p): Declare.
2009-05-12 22:25:00 +00:00
155c8968d9
2009-04-19 Danny Backx <dannybackx@users.sourceforge.net>
...
* configure.srv: Add x86 Windows CE target.
2009-04-19 17:54:52 +00:00
2c4ad78125
gdb/
...
* features/Makefile (rs6000/powerpc-isa205-32l-expedite,
rs6000/powerpc-isa205-altivec32l-expedite,
powerpc-isa205-vsx32l-expedite, rs6000/powerpc-isa205-64l-expedite,
rs6000/powerpc-isa205-altivec64l-expedite,
powerpc-isa205-vsx64l-expedite): New variables.
* regformats/rs6000/powerpc-isa205-32l.dat: Generate.
* regformats/rs6000/powerpc-isa205-altivec32l.dat: Generate.
* regformats/rs6000/powerpc-isa205-vsx32l.dat: Generate.
* regformats/rs6000/powerpc-isa205-64l.dat: Generate.
* regformats/rs6000/powerpc-isa205-altivec64l.dat: Generate.
* regformats/rs6000/powerpc-isa205-vsx64l.dat: Generate.
gdbserver/
* Makefile.in (powerpc-isa205-32l.o, powerpc-isa205-32l.c,
powerpc-isa205-altivec32l.o, powerpc-isa205-altivec32l.c,
powerpc-isa205-vsx32l.o, powerpc-isa205-vsx32l.c,
powerpc-isa205-64l.o, powerpc-isa205-64l.c,
powerpc-isa205-altivec64l.o, powerpc-isa205-altivec64l.c,
powerpc-isa205-vsx64l.o, powerpc-isa205-vsx64l.c): New targets.
* configure.srv (powerpc*-*-linux*): Add ISA 2.05 object files and
XML target descriptions.
* linux-ppc-low.c (ppc_arch_setup): Init registers with 64-bit FPSCR
when inferior is running on an ISA 2.05 or later processor. Add
special case to return offset for full 64-bit slot of FPSCR when
in 32-bits.
2008-11-18 21:48:48 +00:00
dfb64f85d3
2008-11-14 Daniel Gutson <dgutson@codesourcery.com>
...
* configure.tgt (sparc64-*-linux*): Added gdbserver support.
* regformats/reg-sparc64.dat: New file.
gdbserver/
2008-11-14 Daniel Gutson <dgutson@codesourcery.com>
* Makefile.in (SFILES, clean): Added sparc64 files.
(reg-sparc64.o, reg-sparc64.c): New.
* configure.srv (sparc*-*-linux*): New configuration.
* linux-low.c (regsets_fetch_inferior_registers): Swap ptrace
syscall arguments for SPARC.
(regsets_store_inferior_registers): Likewise.
* linux-sparc-low.c: New file.
2008-11-14 22:06:41 +00:00
74aac56ff7
* configure.srv: Merge MIPS and MIPS64.
2008-09-04 17:05:24 +00:00
677c5bb1ab
* doc/gdb.texinfo (PowerPC): Mention Extended FPR's for POWER7.
...
(PowerPC features): Mention feature set for VSX registers.
* gdbserver/Makefile.in: Add required vsx dependencies.
* gdbserver/linux-ppc-low: Define PPC_FEATURE_HAS_VSX.
Declare init_registers_powerpc_vsx32l.
Declare init_registers_powerpc_vsx64l.
Define PTRACE_GETVSXREGS and PTRACE_SETVSXREGS.
(ppc_arch_setup): Check for VSX in hwcap.
(ppc_fill_vsxregset): New function.
(ppc_store_vsxregset): New function.
Add new VSX entry in regset_info target_regsets.
* gdbserver/configure.srv: Add new VSX dependencies.
2008-08-18 15:46:08 +00:00
7284e1bed8
ChangeLog:
...
* Makefile.in (ppc_linux_tdep_h): New macro.
(powerpc_32l_c, powerpc_altivec32_c, powerpc_altivec32l_c): Likewise.
(powerpc_64l_c, powerpc_altivec64_c, powerpc_altivec64l_c): Likewise.
(powerpc_e500l_c): Likewise.
(ppc-linux-nat.o): Update dependencies.
(ppc-linux-tdep.o): Update dependencies.
(rs6000-tdep.o): Update dependencies.
* ppc-tdep.h (ppc_linux_memory_remove_breakpoint): Remove.
(ppc_linux_svr4_fetch_link_map_offsets): Remove.
(ppc_linux_gregset, ppc_linux_fpregset): Move to ppc-linux-tdep.h
(ppc_supply_reg, ppc_collect_reg): Add prototypes.
(tdesc_powerpc_e500): Remove.
* rs6000.c: Include "features/rs6000/powerpc-altivec32.c"
and "features/rs6000/powerpc-altivec64.c".
(ppc_supply_reg, ppc_collect_reg): Make global.
(variants): Use tdesc_powerpc_32 for "powerpc" and
tdesc_powerpc_altivec64 for "powerpc64".
(_initialize_rs6000_tdep): Initialize AltiVec descriptions.
* ppc-linux-tdep.h: New file.
* ppc-linux-tdep.c: Include "ppc-linux-tdep.c".
Include "features/rs6000/powerpc-32l.c".
Include "features/rs6000/powerpc-altivec32l.c".
Include "features/rs6000/powerpc-64l.c".
Include "features/rs6000/powerpc-altivec64l.c".
Include "features/rs6000/powerpc-e500l.c".
(ppc_linux_supply_gregset): New function.
(ppc_linux_collect_gregset): Handle orig_r3 and trap registers.
(ppc32_linux_gregset): Use ppc_linux_supply_gregset.
(ppc64_linux_gregset): Likewise.
(ppc_linux_sigtramp_cache): Handle orig_r3 and trap registers.
(ppc_linux_trap_reg_p): New function.
(ppc_linux_write_pc): New function.
(ppc_linux_core_read_description): New function.
(ppc_linux_init_abi): Install ppc_linux_write_pc and
ppc_linux_core_read_description. Install orig_r3 and trap
registers if present in the target description.
(_initialize_ppc_linux_tdep): Initialize Linux target descriptions.
* ppc-linux-nat.c: Include "ppc-linux-tdep.h".
(PT_ORIG_R3, PT_TRAP): Define if necessary.
(ppc_register_u_addr): Handle orig_r3 and trap registers.
(fetch_ppc_registers): Likewise.
(store_ppc_registers): Likewise.
(store_register): Likewise.
(ppc_linux_read_description): Check whether AltiVec is supported.
Check whether inferior is 32-bit or 64-bit. Return the appropriate
Linux target description.
* features/Makefile (WHICH): Use rs6000/powerpc-32l and
rs6000/powerpc-altivec32l instead of rs6000/powerpc-32.
Use rs6000/powerpc-64l and rs6000/powerpc-altivec64l instead
of rs6000/powerpc-64. Use rs6000/powerpc-e500l instead of
rs6000/powerpc-e500. Update -expedite variables accordingly.
* features/rs6000/power-spe.xml: Use regnum 73 for "acc".
* features/rs6000/powerpc-32.xml: Do not include power-altivec.xml.
* features/rs6000/powerpc-64.xml: Do not include power-altivec.xml.
* features/rs6000/powerpc-e500.c: Regenerate.
* features/rs6000/powerpc-32.c: Regenerate.
* features/rs6000/powerpc-64.c: Regenerate.
* features/rs6000/power-linux.xml: New file.
* features/rs6000/power64-linux.xml: New file.
* features/rs6000/powerpc-32l.xml: New file.
* features/rs6000/powerpc-altivec32l.xml: New file.
* features/rs6000/powerpc-64l.xml: New file.
* features/rs6000/powerpc-altivec64l.xml: New file.
* features/rs6000/powerpc-e500l.xml: New file.
* features/rs6000/powerpc-32l.c: New (generated) file.
* features/rs6000/powerpc-altivec32l.c: New (generated) file.
* features/rs6000/powerpc-64l.c: New (generated) file.
* features/rs6000/powerpc-altivec64l.c: New (generated) file.
* features/rs6000/powerpc-e500l.xml: New (generated) file.
* regformats/reg-ppc.dat: Remove.
* regformats/reg-ppc64.dat: Remove.
* regformats/rs6000/powerpc-32.dat: Remove.
* regformats/rs6000/powerpc-64.dat: Remove.
* regformats/rs6000/powerpc-e500.dat: Remove.
* regformats/rs6000/powerpc-32l.dat: New (generated) file.
* regformats/rs6000/powerpc-altivec32l.dat: New (generated) file.
* regformats/rs6000/powerpc-64l.dat: New (generated) file.
* regformats/rs6000/powerpc-altivec64l.dat: New (generated) file.
* regformats/rs6000/powerpc-e500l.dat: New (generated) file.
gdbserver/ChangeLog:
* configure.srv (powerpc*-*-linux*): Set srv_regobj to
powerpc-32l.o, powerpc-altivec32l.o, powerpc-e500l.o,
powerpc-64l.o, and powerpc-altivec64l.o.
Remove rs6000/powerpc-32.xml, rs6000/powerpc-64.xml, and
rs6000/powerpc-e500.xml; add rs6000/powerpc-32l.xml,
rs6000/powerpc-altivec32l.xml, rs6000/powerpc-e500l.xml,
rs6000/powerpc-64l.xml, rs6000/powerpc-altivec64l.xml,
rs6000/power-linux.xml, and rs6000/power64-linux.xml
to srv_xmlfiles.
* Makefile.in (reg-ppc.o, reg-ppc.c): Remove, replace by ...
(powerpc-32l.o, powerpc-32l.c): ... these new rules.
(powerpc-32.o, powerpc-32.c): Remove, replace by ...
(powerpc-altivec32l.o, powerpc-altivec32l.c): ... these new rules.
(powerpc-e500.o, powerpc-e500.c): Remove, replace by ...
(powerpc-e500l.o, powerpc-e500l.c): ... these new rules.
(reg-ppc64.o, reg-ppc64.c): Remove, replace by ...
(powerpc-64l.o, powerpc-64l.c): ... these new rules.
(powerpc-64.o, powerpc-64.c): Remove, replace by ...
(powerpc-altivec64l.o, powerpc-altivec64l.c): ... these new rules.
(clean): Update.
* linux-ppc-low.c (init_registers_ppc): Remove, replace by ...
(init_registers_powerpc_32l): ... this new prototype.
(init_registers_powerpc_32): Remove, replace by ...
(init_registers_powerpc_altivec32l): ... this new prototype.
(init_registers_powerpc_e500): Remove, replace by ...
(init_registers_powerpc_e500l): ... this new prototype.
(init_registers_ppc64): Remove, replace by ...
(init_registers_powerpc_64l): ... this new prototype.
(init_registers_powerpc_64): Remove, replace by ...
(init_registers_powerpc_altivec64l): ... this new prototype.
(ppc_num_regs): Set to 73.
(PT_ORIG_R3, PT_TRAP): Define if necessary.
(ppc_regmap, ppc_regmap_e500): Add values for orig_r3 and trap.
(ppc_cannot_store_register): Handle orig_r3 and trap.
(ppc_arch_setup): Update init_registers_... calls.
(ppc_fill_gregset): Handle orig_r3 and trap.
* inferiors.c (clear_inferiors): Reset current_inferior.
2008-05-03 17:16:44 +00:00
550512b831
* configure.srv (powerpc64-*-linux*, powerpc-*-linux*): Merge into single
...
powerpc*-*-linux* case.
(s390-*-linux*, s390x-*-linux*): Merge into single s390*-*-linux* case.
2008-04-21 14:55:50 +00:00
b6430ec3fe
* configure.srv [powerpc64-*-linux*]: Remove powerpc-e500.o from
...
srv_regobj. Remove rs6000/powerpc-e500.xml and rs6000/power-spe.xml
from reg_xmlfiles.
* linux-ppc-low.c: Include <elf.h>.
(PPC_FEATURE_HAS_ALTIVEC, PPC_FEATURE_HAS_SPE): Define.
(ppc_hwcap): New global variable.
(ppc_regmap): Remove __SPE__ #ifdef sections.
(ppc_regmap_e500): New global variable.
(ppc_cannot_store_register): Update __SPE__ special case.
(ppc_get_hwcap): New function.
(ppc_arch_setup): Use it to determine whether inferior supports
AltiVec or SPE registers. Set the_low_target.regmap if appropriate.
(ppc_fill_vrregset, ppc_store_vrregset): Define unconditionally.
Do not access registers if target does not support AltiVec.
(ppc_fill_evrregset, ppc_store_evrregset): Define unconditionally.
Do not access registers if target does not support SPE.
(target_regsets): Unconditionally include AltiVec and SPE regsets.
2008-04-17 21:22:41 +00:00
6fe305f7fb
ChangeLog:
...
* regformats/reg-ppc.dat: Rename "ps" to "msr".
* regformats/reg-ppc64.dat: Likewise.
gdbserver/ChangeLog:
* configure.srv [powerpc64-*-linux*]: Add all files mentioned for
powerpc-*-linux* to srv_regobj and reg_xmlfiles.
* linux-ppc-low.c (ppc_get_pc): Support bi-arch operation.
(ppc_set_pc): Likewise.
(ppc_arch_setup): New function.
(ppc_fill_gregset): Call ppc_collect_ptrace_register instead
of collect_register.
(the_low_target): Use ppc_arch_setup as arch_setup initializer.
2008-02-28 05:57:45 +00:00
5b0a002e22
* configure.srv [powerpc64-*-linux*]: Use linux-ppc-low.o
...
instead of linux-ppc64-low.o.
* linux-ppc64-low.c: Remove file.
* Makefile.in (SFILES): Remove linux-ppc64-low.c.
(linux-ppc64-low.o): Remove rule.
* linux-ppc-low.c (init_registers_ppc64): Add prototype.
(init_registers_powerpc_64): Likewise.
(ppc_regmap): Conditionally define depending on __powerpc64__.
(ppc_cannot_store_register): Do not special-case "fpscr" when
compiled on __powerpc64__.
(ppc_collect_ptrace_register): New function.
(ppc_supply_ptrace_register): New function.
(ppc_breakpoint): Change type to "unsigned int".
(ppc_breakpoint_at): Change type of "insn" to "unsigned int".
(the_low_target): Conditionally provide initializers for the
arch_setup member depending on __powerpc64__. Install
collect_ptrace_register and supply_ptrace_register members.
2008-02-28 05:55:55 +00:00
9b4b61c8db
ChangeLog:
...
* features/Makefile (%.dat): Emit xmltarget statement.
* regformats/regdat.sh: Support xmltarget and xmlarch statments.
Generate code to set gdbserver_xmltarget in init_registers_${name}.
* regformats/arm-with-iwmmxt.dat: Regenerate.
* regformats/mips64-linux.dat: Regenerate.
* regformats/mips-linux.dat: Regenerate.
* regformats/rs6000/powerpc-32.dat: Regenerate.
* regformats/rs6000/powerpc-64.dat: Regenerate.
* regformats/rs6000/powerpc-e500.dat: Regenerate.
* regformats/reg-arm.dat: Add xmlarch statement.
* regformats/reg-i386.dat: Likewise.
* regformats/reg-i386-linux.dat: Likewise.
* regformats/reg-x86-64-linux.dat: Likewise.
* regformats/reg-spu.dat: Likewise.
gdbserver/ChangeLog:
* regcache.h (gdbserver_xmltarget): Add extern declaration.
* server.c (gdbserver_xmltarget): Define.
(get_features_xml): Use it to replace "target.xml" and arch_string.
* configure.srv: Remove srv_xmltarget. Add XML files that were
mentioned there to srv_xmlfiles instead. Remove conditional tests
on gdb_cv_arm_iwmmxt, gdb_cv_ppc_altivec, gdb_cv_ppc_spe; set
srv_xmlfiles and srv_regobj to include all possible choices.
* configure.ac (srv_xmltarget): Remove.
(srv_xmlfiles): Do not add "target.xml".
(gdb_cv_arm_iwmmxt, gdb_cv_ppc_altivec, gdb_cv_ppc_spe): Remove
checks for supplementary target information.
* configure: Regenerate.
* Makefile.in (XML_TARGET): Remove.
(target.xml): Remove rule.
(clean): Do not clean up target.xml.
(.PRECIOUS): Do not mention target.xml.
* target.h (struct target_ops): Remove arch_string member.
* linux-low.c (linux_arch_string): Remove.
(linux_target_ops): Remove arch_string initializer.
* linux-low.h (struct linux_target_ops): Remove arch_string member.
* linux-i386-low.c (the_low_target): Remove arch_string initializer.
* linux-x86-64-low.c (the_low_target): Remove arch_string initializer.
* spu-low.c (spu_arch_string): Remove.
(spu_target_ops): Remove arch_string initializer.
* win32-low.c (win32_arch_string): Remove.
(win32_target_ops): Remove arch_string initializer.
* win32-low.h (struct win32_target_ops): Remove arch_string member.
* win32-arm-low.c (the_low_target): Remove arch_string initializer.
* win32-i368-low.c (the_low_target): Remove arch_string initializer.
2008-02-28 05:54:10 +00:00
d61ddec435
* configure.srv [s390x-*-linux*]: Set srv_regobj to include both
...
reg-s390.o and reg-s390x.o.
* linux-low.c (new_inferior): New global variable.
(linux_create_inferior, linux_attach): Set it.
(linux_wait_for_process): Call the_low_target.arch_setup after the
target has stopped for the first time.
(initialize_low): Do not call the_low_target.arch_setup.
* linux-s390-low.c (s390_get_pc): Support bi-arch operation.
(s390_set_pc): Likewise.
(s390_arch_setup): New function.
(the_low_target): Use s390_arch_setup as arch_setup routine.
* regcache.c (realloc_register_cache): New function.
(set_register_cache): Call it for each existing regcache.
2008-02-27 03:31:05 +00:00
1525d5452d
2008-02-11 Maxim Grigoriev <maxim2405@gmail.com>
...
* gdbserver/Makefile.in (SFILES): Add linux-xtensa-low.c.
(clean): Add reg-xtensa.c.
(linux-xtensa-low.o, reg-xtensa.o, reg-xtensa.c): New dependencies.
* gdbserver/configure.srv (xtensa*-*-linux*) New target.
* gdbserver/linux-xtensa-low.c: New.
* gdbserver/xtensa-xtregs.c: New.
2008-02-11 22:00:31 +00:00
59a016f09f
* hostio.c: Don't include errno.h.
...
(errno_to_fileio_errno): Move to hostio-errno.
* hostio.c: (hostio_error): Remove the error parameter. Defer the
error number outputting to the target->hostio_last_error callback.
(hostio_packet_error): Use FILEIO_EINVAL directly.
(handle_open, handle_pread, hostio_error, handle_unlink): Update
calls to hostio_error.
* hostio-errno.c: New.
* server.h (hostio_last_error_from_errno): Declare.
* target.h (target_ops): Add hostio_last_error member.
* linux-low.c (linux_target_op): Register hostio_last_error_from_errno
as hostio_last_error handler.
* spu-low.c (spu_target_ops): Likewise.
* win32-low.c [_WIN32_WCE] (win32_error_to_fileio_error)
(wince_hostio_last_error): New functions.
(win32_target_ops) [_WIN32_WCE]: Register wince_hostio_last_error
as hostio_last_error handler.
(win32_target_ops) [!_WIN32_WCE]: Register
hostio_last_error_from_errno as hostio_last_error handler.
* Makefile.in (SFILES): Add hostio.c and hostio-errno.c.
(hostio-errno.o): New rule.
* configure.ac (GDBSERVER_DEPFILES): Add $srv_hostio_err_objs.
* configure.srv (srv_hostio_err_objs): New variable. Default to
hostio-errno.o.
(arm*-*-mingw32ce*): Set srv_hostio_err_objs to "".
* configure: Regenerate.
2008-02-01 00:08:25 +00:00
30ed0a8f0b
* Makefile.in (clean): Remove new files.
...
(powerpc-32.o, powerpc-32.c, powerpc-e500.o, powerpc-e500.c)
(powerpc-64.o, powerpc-64.c): New rules.
* configure.srv: Use alternate register sets for powerpc64-*-linux*
with AltiVec, powerpc-*-linux* with AltiVec, and powerpc-*-linux*
with SPE.
* linux-ppc-low.c (ppc_regmap): Do not fetch the FP registers for
SPE targets.
(ppc_cannot_store_register): Do not check for FPSCR for SPE targets.
(PTRACE_GETVRREGS, PTRACE_SETVRREGS, SIZEOF_VRREGS, ppc_fill_vrregset)
(ppc_store_vrregset, PTRACE_GETEVRREGS, PTRACE_SETEVRREGS)
(struct gdb_evrregset_t, ppc_fill_evrregset, ppc_store_evrregset): New.
(target_regsets): Add AltiVec and SPE register sets.
* configure.ac: Check for AltiVec and SPE.
* linux-ppc64-low.c (PTRACE_GETVRREGS, PTRACE_SETVRREGS, SIZEOF_VRREGS)
(ppc_fill_vrregset, ppc_store_vrregset): New.
(target_regsets): Add AltiVec register set.
* configure: Regenerated.
* features/Makefile (WHICH): Add PowerPC register definitions.
(rs6000/powerpc-32-expedite, rs6000/powerpc-e500-expedite)
(rs6000/powerpc-64-expedite): New macros.
($(outdir)/%.dat): Handle subdirectories.
* regformats/rs6000/powerpc-32.dat, regformats/rs6000/powerpc-64.dat,
regformats/rs6000/powerpc-e500.dat: New generated files.
2007-10-15 19:58:17 +00:00
0d37add962
* configure.srv: Set srv_linux_regsets for sh*-*-linux*.
...
* linux-sh-low.c (sh_fill_gregset, target_regsets): New.
2007-07-12 19:59:00 +00:00
117ce54362
* features/Makefile: Generate regformats for mips-linux and
...
mips64-linux.
* features/sort-regs.xsl: Correct typo.
* regformats/reg-mips.dat, regformats/reg-mips64.dat: Delete.
* regformats/mips-linux.dat, regformats/mips64-linux.dat: New generated
files.
* Makefile.in (clean): Clean new files instead of deleted ones.
(reg-mips.o, reg-mips.c, reg-mips64.o, reg-mips64.c): Delete.
(mips-linux.o, mips-linux.c, mips64-linux.o, mips64-linux.c): New
rules.
* configure.srv: Specify XML files and new regformats for MIPS and
MIPS64 GNU/Linux.
* linux-mips-low.c (mips_num_regs): Set to only used registers.
(mips_regmap): Do not fetch $0. Remove unused registers. Add
an entry for the restart register.
(mips_cannot_fetch_register, mips_cannot_store_register)
(mips_reinsert_addr, mips_fill_fpregset, mips_store_fpregset): Update
register names to match the XML descriptions.
(mips_fill_gregset, mips_store_gregset): Likewise. Handle the
restart register instead of $0.
2007-06-13 18:50:38 +00:00
d99f33d88b
* configure.srv (arm*-*-mingw32ce*): Move near the other
...
arm targets.
2007-03-29 01:46:20 +00:00
68070c10c7
gdb/
...
* arm-wince-tdep.c: New.
* config/arm/wince.mt (DEPRECATED_TM_FILE): Use tm-arm.h.
(MT_CFLAGS): Delete.
(TM_CLIBS): Delete.
(TDEPFILES): Add arm-wince-tdep.o, corelow.o, solib.o,
solib-legacy.o, solib-svr4.o, and remove wince.o.
* configure.tgt (arm*-*-mingw32ce*): Add.
* signals/signals.c [HAVE_SIGNAL_H]: Check.
(do_target_signal_to_host): Silence 'not used' warning.
* config/arm/tm-wince.h: Remove.
gdb/gdbserver/
* gdbserver/configure.ac: Add errno checking.
(AC_CHECK_HEADERS): Add errno.h, fcntl.h, signal.h,
sys/file.h and malloc.h.
(AC_CHECK_DECLS): Add perror.
(srv_mingwce): Handle.
* gdbserver/configure.srv (i[34567]86-*-cygwin*): Add
win32-i386-low.o to srv_tgtobj.
(i[34567]86-*-mingw*): Likewise.
(arm*-*-mingw32ce*): Add case.
* gdbreplay.c [HAVE_SYS_FILE_H, HAVE_SIGNAL_H,
HAVE_FCNTL_H, HAVE_ERRNO_H, HAVE_MALLOC_H]: Check.
[__MINGW32CE__] (strerror): New function.
[__MINGW32CE__] (errno): Define to GetLastError.
[__MINGW32CE__] (COUNTOF): New macro.
(remote_open): Remove extra close call.
* mem-break.c (delete_breakpoint_at): New function.
* mem-break.h (delete_breakpoint_at): Declare.
* remote-utils.c [HAVE_SYS_FILE_H, HAVE_SIGNAL_H,
HAVE_FCNTL_H, HAVE_UNISTD_H, HAVE_ERRNO_H]: Check.
[USE_WIN32API] (read, write): Add char* casts.
* server.c [HAVE_UNISTD_H, HAVE_SIGNAL_H]: Check.
* server.h: Include wincecompat.h on Windows CE.
[HAVE_ERRNO_H]: Check.
(perror): Declare if not declared.
* utils.c: Add stdlib.h, errno.h and malloc.h includes.
(perror_with_name): Remove errno declaration.
* wincecompat.h: New.
* wincecompat.c: New.
* win32-low.h: New.
* win32-arm-low.c: New.
* win32-i386-low.c: New.
(win32-low.c): Include mem-break.h and win32-low.h, and winnt.h.
(OUTMSG2): Make it safe.
(_T): New macro.
(COUNTOF): New macro.
(NUM_REGS): Get it from the low target.
(CONTEXT_EXTENDED_REGISTERS, CONTEXT_FLOATING_POINT,
CONTEXT_DEBUG_REGISTERS): Add fallbacks to 0.
(thread_rec): Let low target handle debug registers.
(child_add_thread): Likewise.
(child_init_thread_list): Likewise.
(continue_one_thread): Likewise.
(regptr): New.
(do_child_fetch_inferior_registers): Move to ...
* win32-i386-low.c: ... here, and rename to ...
(do_fetch_inferior_registers): ... this.
* win32-low.c (child_fetch_inferior_registers):
Go through the low target.
(do_child_store_inferior_registers): Use regptr.
(strwinerror): New function.
(win32_create_inferior): Handle Windows CE.
Use strwinerror instead of strerror on Windows error
codes. Add program to the error output.
Don't close the main thread handle on Windows CE.
(win32_attach): Use coredll.dll on Windows CE.
(win32_kill): Close current process and current
thread handles.
(win32_detach): Use coredll.dll on Windows CE.
(win32_resume): Let low target handle debug registers, and
step request.
(handle_exception): Add/Remove initial breakpoint. Avoid
non-existant WSTOPSIG on Windows CE.
(win32_read_inferior_memory): Cast to remove warning.
(win32_arch_string): Go through the low target.
(initialize_low): Call set_breakpoint_data with the low
target's breakpoint.
* win32-low.c (dr, FLAG_TRACE_BIT, FCS_REGNUM,
FOP_REGNUM, mappings): Move to ...
* win32-i386-low.c: ... here.
* win32-low.c (win32_thread_info): Move to ...
* win32-low.h: ... here.
* Makefile.in (SFILES): Add win32-low.c, win32-i386-low.c,
win32-arm-low.c and wincecompat.c.
(all:): Add $EXEEXT.
(install-only:): Likewise.
(gdbserver:): Likewise.
(gdbreplay:): Likewise.
* config.in: Regenerate.
* configure: Regenerate.
2007-03-29 01:06:48 +00:00
544afa546f
* win32-i386-low.c: Rename to ...
...
* win32-low.c: ... this.
* configure.srv: Replace win32-i386-low.o with win32-low.o.
* Makefile.in: Likewise.
2007-03-28 22:00:15 +00:00
fb1e4ffce3
* features/Makefile, features/arm-with-iwmmxt.xml,
...
features/gdbserver-regs.xsl, features/number-regs.xsl,
features/sort-regs.xsl, features/xscale-iwmmxt.xml: New files.
* regformats/arm-with-iwmmxt.dat: Generate.
* NEWS: Mention iWMMXt.
* gdb.arch/iwmmxt-regs.c, gdb.arch/iwmmxt-regs.exp: New.
* Makefile.in (OBS): Add $(XML_BUILTIN).
(XML_DIR, XML_TARGET, XML_FILES, XML_BUILTIN): New.
(clean): Update.
(target.xml, xml-builtin.c, stamp-xml, arm-with-iwmmxt.o)
(arm-with-iwmmxt.c): New.
* config.in, configure: Regenerate.
* configure.ac: Check for iWMMXt. Handle srv_xmltarget,
srv_xmlbuiltin, and srv_xmlfiles. Define USE_XML.
* configure.srv: Mention srv_xmltarget and srv_xmlfiles.
(arm*-*-linux*): Add iWMMXt and regset support.
* linux-arm-low.c (PTRACE_GETWMMXREGS, PTRACE_SETWMMXREGS): Define.
(arm_fill_gregset, arm_store_gregset, arm_fill_wmmxregset)
(arm_store_wmmxregset, target_regsets): New.
* server.c (get_features_xml): Take annex argument. Check builtin
XML documents.
(handle_query): Handle multiple annexes.
2007-02-08 21:39:04 +00:00
186947f7ca
gdb/gdbserver/
...
* Makefile.in (clean): Remove reg-mips64.c.
(reg-mips64.c, reg-mips64.o): New rules.
* configure.srv: Handle mips64. Include regset support for mips.
* linux-mips-low.c (union mips_register): New.
(mips_get_pc, mips_set_pc, mips_reinsert_addr): Use it.
(mips_breakpoint, mips_breakpoint_at): Use int.
(mips_collect_register, mips_supply_register)
(mips_collect_register_32bit, mips_supply_register_32bit)
(mips_fill_gregset, mips_store_gregset, mips_fill_fpregset)
(mips_store_fpregset, target_regsets): New.
* thread-db.c (thread_db_get_tls_address): Use uintptr_t.
gdb/
* regformats/reg-mips64.dat: New file.
2006-11-28 22:21:23 +00:00
Pedro Alves
H.J. Lu
Jan Kratochvil
Maciej W. Rozycki
Ulrich Weigand
Luis Machado
Yao Qi
Kwok Yeung
Joseph Myers
Mike Frysinger
Joel Brobecker
Pierre Muller
Andreas Schwab
Maxim Kuvyrkov
Nathan Sidwell
Daniel Jacobowitz
Aleksandar Ristovski
Doug Evans
Thiago Jung Bauermann
Maxim Grigoriev