Not all targets support scheduler-locking. Add a check to see if the
taraget supports scheduler locking, and if it doesn't, don't run the
scheduler-locking tests that will otherwise fail.
There are actually a set of tests that try to use scheduler-locking
however, in most of these cases the test will not be run on smaller
targets (those that might not support threads and scheduler-locking)
due to the targets lack of support for threads, or some other larger
feature.
In the gdb.mi/mi-cmd-param-changed.exp test though, there's no
dependence on threads, or any other larger feature, and so, for the
small target I was using the test would otherwise try to run, only to
fail due to lack of support for scheduler-locking.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (target_supports_scheduler_locking): New proc.
* gdb.mi/mi-cmd-param-changed.exp: Only run scheduler locking
tests if the target supports scheduler locking.
The MIPS target supports 127 signals, and this can create an ambiguity
in process wait statuses. A status value of 0x007f could potentially
indicate a process that has exited with signal 127, or a process that
has stopped with signal 0.
In uClibc-ng the interpretation of 0x007f is that the process has
exited with signal 127 rather than stopped with signal 0, and so,
WIFSTOPPED (W_STOPCODE (0)) will be false rather than true as it would
be on most other platforms.
Given that it's pretty easy to avoid using W_STOPCODE (0), lets do that.
gdb/ChangeLog:
* linux-nat.c (linux_nat_target::follow_fork): Avoid using
'W_STOPCODE (0)' as this could be ambiguous.
evex-no-scale.s has ELF directive:
.section .probe, "", @progbits
and non-ELF targets may pad text sections.
* testsuite/gas/i386/i386.exp: Run evex-no-scale-32 and
evex-no-scale-64 only for ELF targets.
* testsuite/gas/i386/prefix32.s: Append ".p2align 4,0".
* testsuite/gas/i386/prefix64.s: Likewise.
* testsuite/gas/i386/prefix32.l: Updated.
* testsuite/gas/i386/prefix64.l: Likewise.
R_PPC64_REL24_NOTOC is used on calls like "bl foo@notoc" to tell the
linker that linkage stubs for PLT calls or long branches can't use r2
for pic addressing. Instead, new stubs that generate pc-relative
addresses are used. One complication is that pc-relative offsets to
the PLT may need to be 64-bit in large programs, in contrast to the
toc-relative addressing used by older PLT linkage stubs where a 32-bit
offset is sufficient until the PLT itself exceeds 2G in size.
.eh_frame info to cover the _notoc stubs is yet to be implemented.
bfd/
* elf64-ppc.c (ADDI_R12_R11, ADDI_R12_R12, LIS_R12),
(ADDIS_R12_R11, ORIS_R12_R12_0, ORI_R12_R12_0),
(SLDI_R12_R12_32, LDX_R12_R11_R12, ADD_R12_R11_R12): Define.
(ppc64_elf_howto_raw): Add R_PPC64_REL24_NOTOC entry.
(ppc64_elf_reloc_type_lookup): Support R_PPC64_REL24_NOTOC.
(ppc_stub_type): Add ppc_stub_long_branch_notoc,
ppc_stub_long_branch_both, ppc_stub_plt_branch_notoc,
ppc_stub_plt_branch_both, ppc_stub_plt_call_notoc, and
ppc_stub_plt_call_both.
(is_branch_reloc): Add R_PPC64_REL24_NOTOC.
(build_offset, size_offset): New functions.
(plt_stub_size): Support plt_call_notoc and plt_call_both.
(ppc_build_one_stub, ppc_size_one_stub): Support new stubs.
(toc_adjusting_stub_needed): Handle R_PPC64_REL24_NOTOC.
(ppc64_elf_size_stubs): Likewise, and new stubs.
(ppc64_elf_build_stubs, ppc64_elf_relocate_section): Likewise.
* reloc.c: Add BFD_RELOC_PPC64_REL24_NOTOC.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
gas/
* config/tc-ppc.c (ppc_elf_suffix): Support @notoc.
(ppc_force_relocation, ppc_fix_adjustable): Handle REL24_NOTOC.
ld/
* testsuite/ld-powerpc/ext.d,
* testsuite/ld-powerpc/ext.s,
* testsuite/ld-powerpc/ext.lnk,
* testsuite/ld-powerpc/notoc.d,
* testsuite/ld-powerpc/notoc.s: New tests.
* testsuite/ld-powerpc/powerpc.exp: Run them.
Not a lot is conveyed by putting _r2off in a stub symbol that can't be
seen by inspecting the stub code or the toc restoring instruction
immediately after a call via such a stub. Also, we don't distinguish
plt_call stub symbols from plt_call_r2save stub symbols, so this patch
makes long branch and plt branch stub symbols consistent with that
decision.
bfd/
* elf64-ppc.c (ppc_build_one_stub): Lose "_r2off" in stub symbols.
ld/
* testsuite/ld-powerpc/elfv2exe.d: Adjust for stub symbol change.
* testsuite/ld-powerpc/tocopt6.d: Likewise.
This fails for me on openSUSE leap 15.0:
...
FAIL: gdb.python/py-rbreak.exp: check number of returned breakpoints is 11
...
The rbreak "" command expects 11 breaks, but I see two extra for
__libc_csu_fini and __libc_csu_init:
...
Breakpoint 13 at 0x4005b0: file elf-init.c, line 106.^M
Breakpoint 14 at 0x400540: file elf-init.c, line 68.^M
...
This patch fixes the failing test by excluding functions starting with an
underscore.
Tested on x86_64-linux.
2018-08-04 Tom de Vries <tdevries@suse.de>
* gdb.python/py-rbreak.exp: Fix rbreak regexp.
The .note.gnu.property section should be aligned to 4 bytes for x32.
* testsuite/ld-x86-64/property-x86-3.s: Use ".p2align 2" to
align .note.gnu.property section if __64_bit__ is undefined.
This patch fixes a thinko that happened when I was implementing the
IPv6 support on GDB/gdbserver. On certain situations, it is necessary
to disable TCP's Nagle algorithm (NODELAY). For obvious reasons, this
only applies when we are dealing with a TCP connection.
While implementing the IPv6 patch, I noticed that the net_open
function (on gdb/ser-tcp.c) kept a flag indicating whether the
connection type was UDP or TCP. I eliminated that flag, and started
using the 'struct addrinfo *' related to the successful connection
directly. However, I made a mistake:
if (success_ainfo->ai_socktype == IPPROTO_TCP)
^^^^^^^^^^^
{
/* Disable Nagle algorithm. Needed in some cases. */
int tmp = 1;
setsockopt (scb->fd, IPPROTO_TCP, TCP_NODELAY,
(char *) &tmp, sizeof (tmp));
}
The 'ai_socktype' field specifies the socket type (SOCK_STREAM or
SOCK_DGRAM), and not the protocol. This test was always failing, and
the Nagle algorithm was never being disabled.
The obvious fix is to use the 'ai_protocol' field. This is what this
patch does.
Huge "thank you" to Joel Brobecker who reported the regression (he was
experiencing an unusual delay while debugging a bare-metal program
running under QEMU) and helped me set up a proper reproducer for the
bug.
gdb/ChangeLog:
2018-08-03 Sergio Durigan Junior <sergiodj@redhat.com>
* ser-tcp.c (net_open): Fix thinko when deciding whether to
disable TCP's Nagle algorithm (use "ai_protocol" instead of
"ai_socktype").
A small rework of the PRU GCC port exposed that CIE data alignment is
erroneously set to 4 for PRU in GAS. In fact PRU stack must be aligned to 1.
Set the macro to -1, to allow output from GCC to be assembled without errors.
Also, while at it, set DWARF2 HW register numbering to follow latest
* config/tc-pru.c (pru_regname_to_dw2regnum): Return the starting HW
byte-register number.
(pru_frame_initial_instructions): Use byte-numbering for FP index.
* config/tc-pru.h (DWARF2_DEFAULT_RETURN_COLUMN): Use number from
latest GCC.
(DWARF2_CIE_DATA_ALIGNMENT): Set to -1.
PR symtab/16842 shows that gdb will crash when the user tries to
invoke "info address" of a template parameter.
The bug here is that dwarf2read.c does not set the symtab on the
template parameter symbols. This is pedantically correct, given that
the template symbols do not appear in a symtab. However, gdb
primarily uses the symtab backlink to find the symbol's objfile. So,
this patch simply sets the symtab on these symbols.
Tested by the buildbot.
gdb/ChangeLog
2018-08-02 Tom Tromey <tom@tromey.com>
PR symtab/16842.
* dwarf2read.c (read_func_scope): Set symtab on template parameter
symbols.
(process_structure_scope): Likewise.
gdb/testsuite/ChangeLog
2018-08-02 Tom Tromey <tom@tromey.com>
PR symtab/16842.
* gdb.cp/temargs.exp: Test "info address" of a template
parameter.
Starting with MacOS version Sierra, the gdb kill command
seems to work but inferior remains as zombie on the host.
Notice that, as zombie process, the inferior is not killable
by the user, nor by root.
The kill signal gdb sent to the inferior is not handled
in gdb as a signal sent by gdb thus no reply is made and
the process remains (since MacOS does not "release" the
inferior because no reply have been made to the signal
message).
This patch fixes this problem.
gdb/ChangeLog
2018-08-02 Xavier Roirand <roirand@adacore.com>
PR gdb/22629:
* darwin-nat.c (darwin_kill_inferior): Fix handling of
kill inferior.
I noticed that the existing kill-detach-inferiors-cmd.exp test was
causing gdb to crash on macOS 10.13. The bug was that an inferior
that hadn't yet been started would cause get_darwin_inferior to return
NULL, and this was not checked.
I went through the places calling get_darwin_inferior and added checks
where appropriate. This makes the test get a bit further. Not all of
these spots are exercised by the test, but they seem safe enough in
any case.
gdb/ChangeLog
2018-08-02 Tom Tromey <tom@tromey.com>
* darwin-nat.c (find_inferior_task_it, darwin_find_thread)
(darwin_suspend_inferior, darwin_resume_inferior)
(darwin_decode_notify_message, darwin_resume_inferior_threads)
(darwin_check_new_threads): Check result of get_darwin_inferior.
Add a testcase to limit open files to 16 for AR with plugin. Before
commit 103da91bc0
Author: Nick Clifton <nickc@redhat.com>
Date: Wed Aug 1 14:34:41 2018 +0100
Close resource leaks in the BFD library's plugin handler.
it failed with:
../binutils/ar: tmpdir/pr23460f.o: plugin needed to handle lto object
PR binutils/23460
* testsuite/ld-plugin/lto.exp: Run the PR binutils/23460 test.
* testsuite/ld-plugin/pr23460a.c: New file.
* testsuite/ld-plugin/pr23460b.c: Likewise.
* testsuite/ld-plugin/pr23460c.c: Likewise.
* testsuite/ld-plugin/pr23460d.c: Likewise.
* testsuite/ld-plugin/pr23460e.c: Likewise.
* testsuite/ld-plugin/pr23460f.c: Likewise.
PR 14480
* config/tc-pdp11.c (parse_op_noreg): Check for and handle auto
increment deferred.
* testsuite/gas/pdp11/pr14480.d: New test driver file.
* testsuite/gas/pdp11/pr14480.s: New test source file file.
* testsuite/gas/pdp11/pdp11.exp: Run the new test.
* config/tc-ns32k.c (addr_mode): Replace "Drop through" comment
with "Fall through" so that it will be recognised by gcc's switch
statment error checker.
PR 23460
* plugin.c (bfd_plugin_open_input): Close file descriptor if the
call to fstat fails.
(try_claim): Always close the file descriptor at the end of the
function.
(try_load_plugin): If a plugin has already been registered, then
skip the dlopen and onload steps and go straight to claiming the
file. If these is an error, close the plugin.
2018-07-26 Martin Liska <mliska@suse.cz>
PR lto/86548
* libiberty.h (make_temp_file_with_prefix): New function.
2018-07-26 Martin Liska <mliska@suse.cz>
PR lto/86548
* make-temp-file.c (TEMP_FILE): Remove leading 'cc'.
(make_temp_file): Call make_temp_file_with_prefix with
first argument set to NULL.
(make_temp_file_with_prefix): Support also prefix.
git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@262999 138bc75d-0d04-0410-961f-82ee72b054a4
The modified test failed on some powerpc targets due to differences in
default hash style. If the default hash style is both, then more
sections are created, bumping section ids. Section id is used in stub
symbols and although the test is careful to not depend on id in
labels, the stub hash traversal order changes when stub names change.
That lead to the stubs being emitted in a different order and thus not
matching expected output.
* testsuite/ld-powerpc/powerpc.exp: Run tlsopt5 with hash-style
specified.
This patch sets stub_offset in ppc_size_one_stub rather than in
ppc_build_one_stub. That allows the plt stub alignment to be done in
just ppc_size_one_stub rather than both functions. The patch also
corrects the place where the alignment was done, fixing a possible
error in .eh_frame data, and tidies some offset calculations.
bfd/
* elf64-ppc.c (plt_stub_pad): Delay plt_stub_size call until needed.
(ppc_build_one_stub): Don't set stub_offset, instead assert that
it is sane. Don't adjust stub_offset for alignment. Adjust size
calculation. Use "targ" temp when calculating offsets.
(ppc_size_one_stub): Set stub_offset here. Use "targ" temp when
calculating offsets. Adjust for alignment before setting
tls_get_addr_opt_bctrl.
ld/
* testsuite/ld-powerpc/powerpc.exp: Run tlsopt5 with plt alignment.
* testsuite/ld-powerpc/tlsopt5.s: Add extra call.
* testsuite/ld-powerpc/tlsopt5.wf: Adjust expected output.
* testsuite/ld-powerpc/tlsopt5.d: Likewise.
Invoking -var-info-path-expression on a dynamic varobj lead either in wrong
(nonsense) result or to a segmentation fault in cplus_describe_child().
This was caused by the fact that varobj_get_path_expr() called
cplus_path_expr_of_child() ignoring the fact the parent of the variable
is dynamic. Then, cplus_describe_child() accessed the underlaying C type
members by index, causing (i) either wrong (nonsense) expression being
returned (since dynamic child may be completely arbibtrary value)
or (ii) segmentation fault (in case the index higher than number of
underlaying C type members.
This fixes the problem by checking whether a varobj is a child of a dynamic
varobj and, if so, reporting an error as described in documentation.
gdb/ChangeLog:
* varobj.c (varobj_get_path_expr_parent): Report an error if
parent is a dynamic varobj.
gdb/testsuite/Changelog:
* gdb.python/py-mi-var-info-path-expression.c: New file.
* gdb.python/py-mi-var-info-path-expression.py: New file.
* gdb.python/py-mi-var-info-path-expression.exp: New file.
I noticed that re-generating our gnulib import introduced some changes.
I supposed that this comes from the recent upgrade to autoconf 2.69
(though I haven't checked).
Tested by rebuilding on GNU/Linux x86-64 and mingw (cross-compiled from
GNU/Linux).
gdb/ChangeLog:
* gnulib/aclocal.m4: Re-generate.
* gnulib/config.in: Re-generate.
* gnulib/configure: Re-generate.
* gnulib/import/Makefile.in: Re-generate.
* gnulib/import/m4/gnulib-comp.m4: Re-generate.
* gnulib/import/m4/onceonly.m4: Re-generate.
Looking at the address sanitizer output, this was a quite low hanging
fruit. We create target_desc objects for testing that we never free.
Saving them in unique_ptrs takes care of it.
I created a small struct to hold these because I thought it would help
readability.
gdb/ChangeLog:
* target-descriptions.c (struct xml_test_tdesc): New.
(xml_tdesc): Change type to std::vector<xml_test_tdesc>.
(record_xml_tdesc): Update.
(maintenance_check_xml_descriptions): Update.
* target-descriptions.h (record_xml_tdesc): Update comment.
There's no insn allowing ZEROING_MASKING alone. Re-purpose its value for
handling the not uncommon case of insns allowing either form of masking
with register operands, but only merging masking with a memory operand.
claziss
Rainer Orth
Andrew Burgess
Jan Beulich
GDB Administrator
H.J. Lu
Alan Modra
Tom de Vries
Sergio Durigan Junior
Nick Clifton
Dimitar Dimitrov
Jim Wilson
Tom Tromey
Xavier Roirand
Simon Marchi
Roland McGrath
James Patrick Conlon
marxin
Joel Brobecker
Jan Vrany