xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>
* elfarcv2.sc : Allow interrupt vector table to be located at an
arbitrary address. Use DWARF.sc file.
* elfarc.sc: Use DWARF.sc file.
PR 25327
* testsuite/ld-elf/shared.exp: Add -fcommon option to compiler
command line when building libcomm1.o and pr13250 tests.
* testsuite/ld-plugin/lto.exp: Likewise for pr20267 tests.
PR 25224
bfd * Makefile.am: Add z80-elf target support.
* configure.ac: Likewise.
* targets.c: Likewise.
* config.bfd: Add z80-elf target support and new arches: ez80 and z180.
* elf32-z80.c: New file.
* archures.c: Add new z80 architectures: eZ80 and Z180.
* coffcode.h: Likewise.
* cpu-z80.c: Likewise.
* bfd-in2.h: Likewise plus additional Z80 relocations.
* coff-z80.c: Add new relocations for Z80 target and local label check.
gas * config/tc-z80.c: Add new architectures: Z180 and eZ80. Add support
for assembler code generated by SDCC. Add new relocation types. Add
z80-elf target support.
* config/tc-z80.h: Add z80-elf target support. Enable dollar local
labels. Local labels starts from ".L".
* testsuite/gas/all/fwdexp.d: Fix failure due to symbol conflict.
* testsuite/gas/all/fwdexp.s: Likewise.
* testsuite/gas/z80/suffix.d: Fix failure on ELF target.
* testsuite/gas/z80/z80.exp: Add new tests
* testsuite/gas/z80/dollar.d: New file.
* testsuite/gas/z80/dollar.s: New file.
* testsuite/gas/z80/ez80_adl_all.d: New file.
* testsuite/gas/z80/ez80_adl_all.s: New file.
* testsuite/gas/z80/ez80_adl_suf.d: New file.
* testsuite/gas/z80/ez80_isuf.s: New file.
* testsuite/gas/z80/ez80_z80_all.d: New file.
* testsuite/gas/z80/ez80_z80_all.s: New file.
* testsuite/gas/z80/ez80_z80_suf.d: New file.
* testsuite/gas/z80/r800_extra.d: New file.
* testsuite/gas/z80/r800_extra.s: New file.
* testsuite/gas/z80/r800_ii8.d: New file.
* testsuite/gas/z80/r800_z80_doc.d: New file.
* testsuite/gas/z80/z180.d: New file.
* testsuite/gas/z80/z180.s: New file.
* testsuite/gas/z80/z180_z80_doc.d: New file.
* testsuite/gas/z80/z80_doc.d: New file.
* testsuite/gas/z80/z80_doc.s: New file.
* testsuite/gas/z80/z80_ii8.d: New file.
* testsuite/gas/z80/z80_ii8.s: New file.
* testsuite/gas/z80/z80_in_f_c.d: New file.
* testsuite/gas/z80/z80_in_f_c.s: New file.
* testsuite/gas/z80/z80_op_ii_ld.d: New file.
* testsuite/gas/z80/z80_op_ii_ld.s: New file.
* testsuite/gas/z80/z80_out_c_0.d: New file.
* testsuite/gas/z80/z80_out_c_0.s: New file.
* testsuite/gas/z80/z80_reloc.d: New file.
* testsuite/gas/z80/z80_reloc.s: New file.
* testsuite/gas/z80/z80_sli.d: New file.
* testsuite/gas/z80/z80_sli.s: New file.
ld * Makefile.am: Add new target z80-elf
* configure.tgt: Likewise.
* emultempl/z80.em: Add support for eZ80 and Z180 architectures.
* emulparams/elf32z80.sh: New file.
* emultempl/z80elf.em: Likewise.
* testsuite/ld-z80/arch_ez80_adl.d: Likewise.
* testsuite/ld-z80/arch_ez80_z80.d: Likewise.
* testsuite/ld-z80/arch_r800.d: Likewise.
* testsuite/ld-z80/arch_z180.d: Likewise.
* testsuite/ld-z80/arch_z80.d: Likewise.
* testsuite/ld-z80/comb_arch_ez80_z80.d: Likewise.
* testsuite/ld-z80/comb_arch_z180.d: Likewise.
* testsuite/ld-z80/labels.s: Likewise.
* testsuite/ld-z80/relocs.s: Likewise.
* testsuite/ld-z80/relocs_b_ez80.d: Likewise.
* testsuite/ld-z80/relocs_b_z80.d: Likewise.
* testsuite/ld-z80/relocs_f_z80.d: Likewise.
* testsuite/ld-z80/z80.exp: Likewise.
opcodes * z80-dis.c: Add support for eZ80 and Z80 instructions.
This fixes PR 25210 by specifying the the correct ELF class for AArch64 stubs.
After doing this the stub section starts behaving like a normal object file
loaded from disk. That is SEC_LINKER_CREATED causes us to have to write the
section manually.
This flag was added as a fix for PR 24753. I believe that
fix to still be correct as linker created sections don't have a size on disk
and it fixes the Arm bootstrap regression. But in this case specifying the
correct section class also makes the stub section not be considered by
compress.c.
So I'm partially revert this change so that we don't have to manage the section
manually as implied by SEC_LINKER_CREATED.
bfd/ChangeLog:
PR 25210
PR 24753
* elfnn-aarch64.c (_bfd_aarch64_create_stub_section): Set ELF class.
ld/ChangeLog:
PR 25210
PR 24753
* emultempl/aarch64elf.em (elf${ELFSIZE}_aarch64_add_stub_section):
Remove SEC_LINKER_CREATED.
* testsuite/ld-aarch64/aarch64-elf.exp: Add erratum835769-843419.
* testsuite/ld-aarch64/erratum835769-843419.d: New test.
I reckon it's quite OK to write &p->field in C when p might be NULL,
and lots of old C programmers probably agree with me. However, ubsan
disagrees and so do some people I respect. I suspect C++ influence is
to blame for the ubsan behaviour. See
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=92634. So far no one has
educated me as to why I'm wrong to claim that there isn't anything in
the C standard to say that p->field is always (*p).field. Note 79
doesn't quite do that because it doesn't cover null pointers. If
there was such an equivalence then you could claim &p->field has a
null pointer reference when p is NULL, even though no C compiler would
ever dereference p.
Anyway, to silence ubsan I'm going to apply the following though I
prefer to avoid casts when possible. And I'm using (void *)
deliberately because this is C, not C++!
* ldlang.c (lang_output_section_find_by_flags): Don't use &p->field
when p might be NULL.
* ldelf.c (output_rel_find, ldelf_place_orphan): Likewise.
(insert_os_after, lang_insert_orphan, lookup_name): Likewise.
(strip_excluded_output_sections, lang_clear_os_map): Likewise.
(lang_check, lang_for_each_input_file): Likewise.
(lang_reset_memory_regions, find_replacements_insert_point): Likewise.
(find_rescan_insertion, lang_propagate_lma_regions): Likewise.
(lang_record_phdrs): Likewise.
* emultempl/alphaelf.em (alpha_after_open): Likewise.
* emultempl/mmo.em (mmo_place_orphan): Likewise.
* emultempl/pe.em (gld_${EMULATION_NAME}_place_orphan): Likewise.
* emultempl/pep.em (gld_${EMULATION_NAME}_place_orphan): Likewise.
* emultempl/ppc32elf.em (ppc_after_check_relocs): Likewise.
* emultempl/spuelf.em (spu_before_allocation): Likewise.
(embedded_spu_file): Likewise.
Changing objdump disassembly output like this always requires some
testsuite changes, with the avr and x64_64 changes simply due to
picking up better symbols, the whole point of the patch.
The mips changes are due to mips-sgi-irix changing STT_NOTYPE symbols
to STT_OBJECT, which objdump now chooses in preference to script
symbols. The problem is that objdump looks at the first symbol in the
section being disassembled, and if object type, just dumps out bytes
rather than disassembling. This results in new failures:
FAIL: JAL overflow 2
FAIL: undefined weak symbol overflow
FAIL: undefined weak symbol overflow (n32)
FAIL: undefined weak symbol overflow (n64)
So for mips-sgi-irix function symbols really do need to be function
type. I fixed a few more than just the required minimum to avoid the
above test fails.
binutils/
* objdump.c (compare_section): New static var.
(compare_symbols): Sort by current section only. Don't access
symbol name out of bounds when checking for file symbols.
Sort section symbols and object symbols.
(find_symbol_for_address): Remove bogus debugging and section
symbol test.
(disassemble_data): Move symbol sort from here..
(disassemble_section): ..to here. Set compare_section.
ld/
* testsuite/ld-avr/lds-mega.d: Adjust symbols to suit objdump change.
* testsuite/ld-avr/lds-tiny.d: Likewise.
* testsuite/ld-x86-64/load2.d: Likewise.
* testsuite/ld-mips-elf/compact-eh1.s: Give function symbols
function type.
* testsuite/ld-mips-elf/compact-eh1a.s: Likewise.
* testsuite/ld-mips-elf/compact-eh1b.s: Likewise.
* testsuite/ld-mips-elf/compact-eh2.s: Likewise.
* testsuite/ld-mips-elf/compact-eh3.s: Likewise.
* testsuite/ld-mips-elf/compact-eh3a.s: Likewise.
* testsuite/ld-mips-elf/eh-frame5.s: Likewise.
* testsuite/ld-mips-elf/ehdr_start-new.s: Likewise.
* testsuite/ld-mips-elf/ehdr_start-o32.s: Likewise.
* testsuite/ld-mips-elf/emit-relocs-1a.s: Likewise.
* testsuite/ld-mips-elf/jaloverflow-2.s: Likewise.
* testsuite/ld-mips-elf/jaloverflow.s: Likewise.
* testsuite/ld-mips-elf/mips16-call-global-1.s: Likewise.
* testsuite/ld-mips-elf/mips16-intermix-1.s: Likewise.
* testsuite/ld-mips-elf/mips16-pic-1b.s: Likewise.
* testsuite/ld-mips-elf/mips16-pic-4c.s: Likewise.
* testsuite/ld-mips-elf/no-shared-1-n64.s: Likewise.
* testsuite/ld-mips-elf/no-shared-1-o32.s: Likewise.
* testsuite/ld-mips-elf/pic-and-nonpic-1b-micromips.s: Likewise.
* testsuite/ld-mips-elf/pic-and-nonpic-1b.s: Likewise.
* testsuite/ld-mips-elf/pic-and-nonpic-2a.s: Likewise.
* testsuite/ld-mips-elf/pic-and-nonpic-3b.s: Likewise.
* testsuite/ld-mips-elf/pic-and-nonpic-4b.s: Likewise.
* testsuite/ld-mips-elf/pic-and-nonpic-5a.s: Likewise.
* testsuite/ld-mips-elf/pic-and-nonpic-6-n32c.s: Likewise.
* testsuite/ld-mips-elf/pic-and-nonpic-6-n64c.s: Likewise.
* testsuite/ld-mips-elf/pic-and-nonpic-6-o32c.s: Likewise.
* testsuite/ld-mips-elf/pie.s: Likewise.
* testsuite/ld-mips-elf/relax-jalr.s: Likewise.
* testsuite/ld-mips-elf/reloc-1a.s: Likewise.
* testsuite/ld-mips-elf/reloc-2a.s: Likewise.
* testsuite/ld-mips-elf/reloc-4.s: Likewise.
* testsuite/ld-mips-elf/reloc-5.s: Likewise.
* testsuite/ld-mips-elf/reloc-6b.s: Likewise.
* testsuite/ld-mips-elf/textrel-1.s: Likewise.
* testsuite/ld-mips-elf/undefweak-overflow.s: Likewise.
* testsuite/ld-mips-elf/undefweak-overflow.d: Adjust.
mips-sgi-irix gas emits STT_OBJECT symbols where other assemblers
would use STT_NOTYPE. See mips_frob_symbol in gas/config/tc-mips.c.
Also, the section of some dynamic symbols is set to SHN_MIPS_TEXT or
SHN_MIPS_DATA. See _bfd_mips_elf_finish_dynamic_symbol in
bfd/elfxx-mips.c. These differences are visible in readelf output
and cause some tests to fail for no other good reason.
The patch fixes the following fails and removes an xfail.
FAIL: ld-elf/pr23591
FAIL: PROVIDE_HIDDEN test (auxiliary shared object)
FAIL: PR ld/21233 dynamic symbols with section GC (auxiliary shared library)
* testsuite/ld-elf/pr21233-l.sd: Accept OBJECT for type and
PRC for section of symbols.
* testsuite/ld-elf/pr23591.d: Likewise.
* testsuite/ld-elf/provide-hidden-s.nd: Likewise.
* testsuite/ld-mips-elf/start.s: Make symbols function type.
* testsuite/ld-mips-elf/hash2.d: Adjust. Don't xfail irix.
This adds an alternative to using #... in dump files, useful where we
only want to allow specific extra output. DW_CFA_nop in CIEs and FDEs
to pad out to required alignment (larger for 64-bit than 32-bit) is
an example where these optional match patterns are useful.
binutils/
* testsuite/lib/binutils-common.exp (regexp_diff): Support #?REGEXP.
ld/
* testsuite/ld-elf/eh4.d: Match optional padding DW_CFA_nop in FDEs.
* testsuite/ld-elf/eh5.d: Likewise, and extra CIEs emitted on
embedded targets.
The flag controlling the default DWARF CIE version to produce now
starts with the value -1. This can be modified with the command line
flag as before, but after command line flag processing, in
md_after_parse_args targets can, if the global still has the value -1,
override this value. This gives a target specific default.
If a CIE version is not select either by command line flag, or a
target specific default, then some new code in dwarf2_init now select
a global default. This remains as version 1 to match previous
behaviour.
This RISC-V has a target specific default of version provided, this
make the return column uleb128, which means we can use all DWARF
registers include CSRs.
I chose to switch to version 3 rather than version 4 as this is most
similar to the global default (version 1). Switching to version 4
adds additional columns to the CIE header.
gas/ChangeLog:
* as.c (flag_dwarf_cie_version): Change initial value to -1, and
update comment.
* config/tc-riscv.c (riscv_after_parse_args): Set
flag_dwarf_cie_version if it has not already been set.
* dwarf2dbg.c (dwarf2_init): Initialise flag_dwarf_cie_version if
needed.
* testsuite/gas/riscv/default-cie-version.d: New file.
* testsuite/gas/riscv/default-cie-version.s: New file.
ld/ChangeLog:
* testsuite/ld-elf/eh5.d: Accept version 3 DWARF CIE.
Change-Id: Ibbfe8f0979fba480bf0a359978b09d2b3055555e
and other tidies. I think it's better to default to passing the
section to bfd_octets_per_byte, even in cases where we know it won't
make a difference.
A number of the coff reloc functions used bfd_octets_per_byte wrongly,
not factoring it into the offset into the data buffer. As it happens,
the targets using those files always had bfd_octets_per_byte equal to
one, so there wasn't any detectable wrong behaviour. However, it is
wrong in the source and might cause trouble for anyone creating a new
target. Besides fixing that, the patch also defines OCTETS_PER_BYTE
as one in target files where that is appropriate.
bfd/
* archures.c (bfd_octets_per_byte): Tail call
bfd_arch_mach_octets_per_byte.
* coff-arm.c (OCTETS_PER_BYTE): Define.
(coff_arm_reloc): Introduce new "octets" temp. Use OCTETS_PER_BYTE
with section. Correct "addr". Remove ATTRIBUTE_UNUSED.
* coff-i386.c (coff_i386_reloc): Similarly.
* coff-mips.c (mips_reflo_reloc): Similarly.
* coff-x86_64.c (coff_amd64_reloc): Similarly.
* elf32-msp430.c (OCTETS_PER_BYTE): Define.
(rl78_sym_diff_handler): Use OCTETS_PER_BYTE, with section.
* elf32-nds32.c (nds32_elf_get_relocated_section_contents): Similarly.
* elf32-ppc.c (ppc_elf_addr16_ha_reloc): Similarly.
* elf32-pru.c (pru_elf32_do_ldi32_relocate): Similarly.
* elf32-s12z.c (opru18_reloc): Similarly.
* elf32-sh.c (sh_elf_reloc): Similarly.
* elf32-spu.c (spu_elf_rel9): Similarly.
* elf32-xtensa.c (bfd_elf_xtensa_reloc): Similarly.
* elf64-ppc.c (ppc64_elf_ha_reloc, ppc64_elf_brtaken_reloc),
(ppc64_elf_toc64_reloc): Similarly.
* bfd.c (bfd_get_section_limit): Pass section to bfd_octets_per_byte.
* cofflink.c (_bfd_coff_link_input_bfd),
(_bfd_coff_reloc_link_order): Likewise.
* elf.c (_bfd_elf_section_offset): Likewise.
* elflink.c (resolve_section, bfd_elf_perform_complex_relocation),
(elf_link_input_bfd, elf_reloc_link_order, elf_fixup_link_order),
(bfd_elf_final_link): Likewise.
* elf.c (_bfd_elf_make_section_from_shdr): Don't strncmp twice
to set SEC_ELF_OCTETS.
* reloc.c (bfd_perform_relocation): Tidy SEC_ELF_OCTETS special case.
(bfd_install_relocation): Likewise.
(_bfd_final_link_relocate): Don't recalculate octets.
* syms.c (_bfd_stab_section_find_nearest_line): Introduc new
"octets" temp.
* bfd-in2.h: Regenerate.
ld/
* ldexp.c (fold_name): Pass section to bfd_octets_per_byte.
* ldlang.c (init_opb): Don't call bfd_arch_mach_octets_per_byte
unnecessarily.
All symbols, sizes and relocations in this section are octets instead of
bytes. Required for DWARF debug sections as DWARF information is
organized in octets, not bytes.
bfd/
* section.c (struct bfd_section): New flag SEC_ELF_OCTETS.
* archures.c (bfd_octets_per_byte): New parameter sec.
If section is not NULL and SEC_ELF_OCTETS is set, one octet es
returned [ELF targets only].
* bfd.c (bfd_get_section_limit): Provide section parameter to
bfd_octets_per_byte.
* bfd-in2.h: regenerate.
* binary.c (binary_set_section_contents): Move call to
bfd_octets_per_byte into section loop. Provide section parameter
to bfd_octets_per_byte.
* coff-arm.c (coff_arm_reloc): Provide section parameter
to bfd_octets_per_byte.
* coff-i386.c (coff_i386_reloc): likewise.
* coff-mips.c (mips_reflo_reloc): likewise.
* coff-x86_64.c (coff_amd64_reloc): likewise.
* cofflink.c (_bfd_coff_link_input_bfd): likewise.
(_bfd_coff_reloc_link_order): likewise.
* elf.c (_bfd_elf_section_offset): likewise.
(_bfd_elf_make_section_from_shdr): likewise.
Set SEC_ELF_OCTETS for sections with names .gnu.build.attributes,
.debug*, .zdebug* and .note.gnu*.
* elf32-msp430.c (rl78_sym_diff_handler): Provide section parameter
to bfd_octets_per_byte.
* elf32-nds.c (nds32_elf_get_relocated_section_contents): likewise.
* elf32-ppc.c (ppc_elf_addr16_ha_reloc): likewise.
* elf32-pru.c (pru_elf32_do_ldi32_relocate): likewise.
* elf32-s12z.c (opru18_reloc): likewise.
* elf32-sh.c (sh_elf_reloc): likewise.
* elf32-spu.c (spu_elf_rel9): likewise.
* elf32-xtensa.c (bfd_elf_xtensa_reloc): likewise
* elf64-ppc.c (ppc64_elf_brtaken_reloc): likewise.
(ppc64_elf_addr16_ha_reloc): likewise.
(ppc64_elf_toc64_reloc): likewise.
* elflink.c (bfd_elf_final_link): likewise.
(bfd_elf_perform_complex_relocation): likewise.
(elf_fixup_link_order): likewise.
(elf_link_input_bfd): likewise.
(elf_link_sort_relocs): likewise.
(elf_reloc_link_order): likewise.
(resolve_section): likewise.
* linker.c (_bfd_generic_reloc_link_order): likewise.
(bfd_generic_define_common_symbol): likewise.
(default_data_link_order): likewise.
(default_indirect_link_order): likewise.
* srec.c (srec_set_section_contents): likewise.
(srec_write_section): likewise.
* syms.c (_bfd_stab_section_find_nearest_line): likewise.
* reloc.c (_bfd_final_link_relocate): likewise.
(bfd_generic_get_relocated_section_contents): likewise.
(bfd_install_relocation): likewise.
For section which have SEC_ELF_OCTETS set, multiply output_base
and output_offset with bfd_octets_per_byte.
(bfd_perform_relocation): likewise.
include/
* coff/ti.h (GET_SCNHDR_SIZE, PUT_SCNHDR_SIZE, GET_SCN_SCNLEN),
(PUT_SCN_SCNLEN): Adjust bfd_octets_per_byte calls.
binutils/
* objdump.c (disassemble_data): Provide section parameter to
bfd_octets_per_byte.
(dump_section): likewise
(dump_section_header): likewise. Show SEC_ELF_OCTETS flag if set.
gas/
* as.h: Define SEC_OCTETS as SEC_ELF_OCTETS if OBJ_ELF.
* dwarf2dbg.c: (dwarf2_finish): Set section flag SEC_OCTETS for
.debug_line, .debug_info, .debug_abbrev, .debug_aranges, .debug_str
and .debug_ranges sections.
* write.c (maybe_generate_build_notes): Set section flag
SEC_OCTETS for .gnu.build.attributes section.
* frags.c (frag_now_fix): Don't divide by OCTETS_PER_BYTE if
SEC_OCTETS is set.
* symbols.c (resolve_symbol_value): Likewise.
ld/
* ldexp.c (fold_name): Provide section parameter to
bfd_octets_per_byte.
* ldlang (init_opb): New argument s. Set opb_shift to 0 if
SEC_ELF_OCTETS for the current section is set.
(print_input_section): Pass current section to init_opb.
(print_data_statement,print_reloc_statement,
print_padding_statement): Likewise.
(lang_check_section_addresses): Call init_opb for each
section.
(lang_size_sections_1,lang_size_sections_1,
lang_do_assignments_1): Likewise.
(lang_process): Pass NULL to init_opb.
Make _bfd_riscv_relax_call handle section alignment padding same as
the _bfd_riscv_relax_lui and _bfd_riscv_relax_pc functions already
do. Use the max section alignment if section boundaries are crossed,
otherwise the alignment of the containing section.
bfd/
PR 25181
* elfnn-riscv.c (_bfd_riscv_relax_call): Always add max_alignment to
foff. If sym_sec->output_section and sec->output_section are the same
and not *ABS* then set max_alignment to that section's alignment.
ld/
PR 25181
* testsuite/ld-riscv-elf/call-relax-0.s: New file.
* testsuite/ld-riscv-elf/call-relax-1.s: New file.
* testsuite/ld-riscv-elf/call-relax-2.s: New file.
* testsuite/ld-riscv-elf/call-relax-3.s: New file.
* testsuite/ld-riscv-elf/call-relax.d: New test.
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Run call-relax test.
Change-Id: Iaf65cee52345abf1955f36e8e72c4f6cc0db8d9a
I think it is past time to remove CR16C support. CR16C was added in
2004, and only for ld. gas and binutils support is lacking, and there
have been no commits to bfd/elf32-cr16c.c other than warning fixes or
global maintainers making changes to all targets. I see no maintainer
listed for CR16C, and no commits from anyone at NSC supporting the
target. Furthermore, at the time the CR16 support was added in 2007,
config.sub was changed upstream to no longer recognise cr16c as a
valid cpu. That means the CR16C ld support is only available as a
secondary target by configuring with, for example,
--enable-targets=all or --enable-targets=cr16c-unknown-elf. No
testing of the CR16C target is possible.
include/
* elf/cr16c.h: Delete.
bfd/
* cpu-cr16c.c: Delete.
* elf32-cr16c.c: Delete.
* Makefile.am,
* archures.c,
* config.bfd,
* configure.ac,
* reloc.c,
* targets.c: Remove cr16c support.
* Makefile.in,
* bfd-in2.h,
* configure,
* libbfd.h,
* po/SRC-POTFILES.in: Regenerate.
ld/
* emulparams/elf32cr16c.sh: Delete.
* scripttempl/elf32cr16c.sc: Delete.
* Makefile.am,
* configure.tgt: Remove cr16c support.
* NEWS: Mention removal of cr16c.
* Makefile.in,
* po/BLD-POTFILES.in: Regenerate.
The target list was supposed to be more or less alphabetically sorted,
but this wasn't anywhere near the case. The comment about keeping
architecture variants together seems odd to me, and is no doubt the
reason why ix86 and x86_64 were grouped together, so I removed that
comment. The patch doesn't change order of entries for a given cpu.
* configure.tgt: Order targets by cpu.
For targets with octets_per_byte > 1, testsuite/ld-scripts/rgn-over*
produce wrong sizes in the generated map files:
.text 0x0000000000001000 0x6
^^^ # correct
*(.txt)
.txt 0x0000000000001000 0xc tmpdir/rgn-over.o
^^^ # should also be 0x6
* ldlang.c (print_input_section): Shift printed size by opb_shift.
A target that sets EMBEDDED non-empty is one that doesn't want to put
the ELF file header or program header in a memory image. Likely the
target isn't interested in supporting dynamically loaded executables,
shared libraries, or PIEs, because loaders for such binaries generally
require program headers to be present. This isn't 100% true though.
The target might be one where the loader accesses the file system in
order to retrieve headers.
Also, note that not all "shared libraries" require gcc -shared or the
shared library support in the linker. I believe one implementation of
shared libraries on uclinux is like this.
So, this patch removes GENERATE_SHLIB_SCRIPT and GENERATE_PIE_SCRIPT
in most emulparams files where EMBEDDED is set, restoring the shared
lib and pie support in emulparams files that unset EMBEDDED after
including a file where the support is removed.
Exceptions to the general rule that EMBEDDED disables shared libs are:
arm*-*-symbianelf*, where the OS wants shared library support
without ELF program headers in the image, and
sh*-*-uclinux*, where I've left things as they were, ie. both
EMBEDDED and GENERATE_SHLIB_SCRIPT because I'm unsure as to the
shared library scheme.
* emulparams/aarch64elf.sh (GENERATE_SHLIB_SCRIPT),
(GENERATE_PIE_SCRIPT): Don't set.
* emulparams/aarch64elf32.sh (GENERATE_SHLIB_SCRIPT),
(GENERATE_PIE_SCRIPT): Don't set.
* emulparams/arcelf.sh (GENERATE_SHLIB_SCRIPT): Don't set.
* emulparams/armelf.sh (GENERATE_SHLIB_SCRIPT),
(GENERATE_PIE_SCRIPT): Don't set.
* emulparams/armelf_fbsd.sh (GENERATE_SHLIB_SCRIPT): Set.
* emulparams/armelf_nbsd.sh (GENERATE_SHLIB_SCRIPT),
(GENERATE_PIE_SCRIPT): Set.
* emulparams/armelf_vxworks.sh (GENERATE_SHLIB_SCRIPT): Set.
* emulparams/armsymbian.sh (GENERATE_SHLIB_SCRIPT): Set.
* emulparams/elf32bfin.sh (GENERATE_SHLIB_SCRIPT): Don't set.
* emulparams/elf32microblaze.sh (GENERATE_SHLIB_SCRIPT): Don't set.
* emulparams/score3_elf.sh (GENERATE_SHLIB_SCRIPT): Don't set.
* emulparams/shelf.sh (GENERATE_SHLIB_SCRIPT): Don't set.
* emulparams/shelf_nbsd.sh (GENERATE_SHLIB_SCRIPT),
(GENERATE_PIE_SCRIPT): Set.
* emulparams/shelf_uclinux.sh (GENERATE_SHLIB_SCRIPT): Set.
No real changes here, just making it that much easier to find targets
that set EMBEDDED to a non-empty string.
* emulparams/elf32bfinfd.sh: Unset EMBEDDED rather assigning as empty.
* emulparams/elf32frvfd.sh: Likewise.
* emulparams/elf32lm32fd.sh: Likewise.
* emulparams/i386lynx.sh: Likewise.
At least, not in the GOT. R_PPC64_RELATIVE is fine for powerpc64 in
the .opd section.
PR 22269
* testsuite/ld-elf/pr22269-1.rd: Look for GOT section NONE and
RELATIVE relocs.
* testsuite/ld-elf/shared.exp (pr22269-1): Give test a better
name. Use -z nocombreloc.
Two patches from Nelson Chu.
It is better to use the linker's callback functions to handle the link time
error when relocating. The unresolved relocation error can be regarded as
an unsupported relocation. To make user easier to understand different errors,
we need to extend the current error message format of the callback function
since the format is fixed.
bfd/
* elfnn-riscv.c (riscv_elf_relocate_section): Use asprintf to extend
the error message if needed, and then store the result into the
`msg_buf`. Finally, remember to free the unused `msg_buf`. All error
message for the dangerous relocation should be set before we call the
callback function. If we miss the error message since linker runs out
of memory, we should set the default error message for the error.
ld/
* testsuite/ld-riscv-elf/lib-nopic-01a.s: Create the shared library
lib-nopic-01a.so, it will be linked with lib-nopic-01b.s.
* testsuite/ld-riscv-elf/lib-nopic-01b.s: Add new test for the
unresolved relocation. Link the non-pic code into a shared library
may cause the error.
* testsuite/ld-riscv-elf/lib-nopic-01b.d: Likewise.
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Run the new test only when
the shared library is supported.
R_RISCV_CALL, R_RISCV_JAL and R_RISCV_RVC_JUMP are pc-relative relocation.
For now, we do not allow the object with these relocation links into a shared
library since the referenced symbols may be loaded to the places that too far
from the pc. We can improve the error message for these unsupported relocation
to notice user that they should recompile their code with `fPIC`.
bfd/
* elfnn-riscv.c (riscv_elf_relocate_section): Report the error message
that user should recompile their code with `fPIC` when linking non-pic
code into shared library.
ld/
* testsuite/ld-riscv-elf/lib-nopic-01b.d: Update the error message.
Change-Id: Ib3347a0a6fa1c2b20a9647c314d5bec2c322ff04
This implements padding of orphan executable sections for PowerPC.
Of course, the simple implementation of bfd_arch_ppc_nop_fill and
removing the NOP definition didn't work, with powerpc64 hitting a
testsuite failure linking to S-records. That's because the srec
target is BFD_ENDIAN_UNKNOWN so the test of bfd_big_endian (abfd) in
default_data_link_order therefore returned false, resulting in a
little-endian nop pattern. The rest of the patch fixes that problem
by adding a new field to bfd_link_info that can be used to determine
actual endianness on targets like srec.
PR 13616
include/
* bfdlink.h (struct bfd_link_info <big_endian>): New field.
bfd/
* cpu-powerpc.c (bfd_arch_ppc_nop_fill): New function, use it
for all ppc arch info.
* linker.c (default_data_link_order): Pass info->big_endian to
arch_info->fill function.
ld/
* emulparams/elf64lppc.sh (NOP): Don't define.
* emulparams/elf64ppc.sh (NOP): Don't define.
* ldwrite.c (build_link_order): Use link_info.big_endian. Move
code determining endian to use for data_statement to..
* ldemul.c (after_open_default): ..here. Set link_info.big_endian.
Some of the comments in this file are ancient and no longer reflect
reality. This patch removes those comments, and also the description
of ld options emitted to script files. While describing what an
option does in the script file might help reinforce what the option
does, it's unnecessary and makes for overlong lines. Also, some of
the descriptions did not mention all the options.
* genscripts.sh: Correct comments. Remove outdated comment block
saying "Generate 5 or 6 script files..". Remove description of
ld options from comment emitted to script files, and order options
as per comment block in genscripts.sh saying which scripts are
generated.
ctor_cmp had an ineffective comparison of addresses in an attempt to
ensure sort stability. Comparing the addresses passed to the
comparison function can't work since those addresses may be from an
array that is already perturbed by qsort.
* ldctor.h (struct set_element): Make next field a union, adding
idx field.
* ldctor.c (ctor_cmp): Dereference pointer and lose unnecessary
const. Replace final sort on pointer value with final sort on idx.
(ldctor_add_set_entry): Adjust next field access.
(ldctor_build_sets): Likewise. Set u.idx field for sort.
binutils* README-how-to-make-a-release: Add a note to reset the
development flag back to true after making a point release.
ld * NEWS: Delete superflous "Changes in 2.33" comment.
Alan Modra
Claudiu Zissulescu
Nick Clifton
Hannes Domani
Sergey Belyashov
Tamar Christina
Anthony Green
H.J. Lu
Andrew Burgess
Martin Liska
Christian Eggers
Jim Wilson
John David Anglin