gas/
* config/tc-nios2.c (nios2_control_register_arg_p): Rename
"fstatus" control register to "eccinj".
opcodes/
* nios2-opc.c (nios2_builtin_reg): Rename "fstatus" control register
to "eccinj".
Make current with UA2011 specification.
Add an F_PREFERRED opcode flag that indicates a preferred alias
when multiple aliases for the same opcode exists.
For 'lzd':
Add 'lzcnt' as primary instruction, and make 'lzd' an alias.
Add 'ldtw', 'ldtwa', 'sttw', 'sttwa':
The modern opcode for for 'ldd', 'ldda', 'std', and 'stda' on
integer registers. Mark the latter now as aliases.
For 'flush':
Support "[address]" syntax as well as plain "address".
Rework 'mov' aliases for 'wr':
Eliminate bogus three operand moves, and encode the
instructions properly for the "mov REG, %ASR" cases,
specifically we should encode the register in rs2 not rs1 as
per The SPARC V8 Architecture Manual.
Add missing cbcond aliases:
c{w,x}bz, c{w,x}blu, c{w,x}bnz, c{w,x}bgeu
Add 'd' suffix VIS logical ops:
The primary opcode for 'fzero' is now 'fzerod' (compare with
'fzeros'), for example. And thus 'fzero' is now an alias.
Add modern opcodes for condition code setting edge instructions:
They are now edgeN{,l}cc instead of plain edgeN{,l}.
Add modern opcodes for VIS comparisons:
All VIS comparisons now start with prefix "fp", retain the
older variants as aliases.
The signed variants for equal and not-equal have "u" aliases
to show that these comparisons are equally suited for unsigned
compares.
Update existing test cases as needed, and add several new ones.
include/opcode/
* sparc.h (F_PREFERRED): Define.
(F_PREF_ALIAS): Define.
opcodes/
* sparc-dis.c (compare_opcodes): When encountering multiple aliases
of an opcode, prefer the one with F_PREFERRED set.
* sparc-opc.c (sparc_opcodes): Add ldtw, ldtwa, sttw, sttwa,
lzcnt, flush with '[address]' syntax, and missing cbcond pseudo
ops. Make 64-bit VIS logical ops have "d" suffix in their names,
mark existing mnenomics as aliases. Add "cc" suffix to edge
instructions generating condition codes, mark existing mnenomics
as aliases. Add "fp" prefix to VIS compare instructions, mark
existing mnenomics as aliases.
gas/testsuite/
* gas/sparc/cbcond.s: Add tests for new opcode aliases.
* gas/sparc/cbcond.d: Updated.
* gas/sparc/hpcvis3.s: Add tests for new opcode aliases.
* gas/sparc/hpcvis3.d: Updated.
* gas/sparc/v8-movwr-imm.d: Fix expected disassembly.
* gas/sparc/edge.s: New test.
* gas/sparc/edge.d: Expected disassembly.
* gas/sparc/flush.s: New test.
* gas/sparc/flush.d: Expected disassembly.
* gas/sparc/ldd_std.s: New test.
* gas/sparc/ldd_std.d: Expected disassembly.
* gas/sparc/ldtw_sttw.s: New test.
* gas/sparc/ldtw_sttw.d: Expected disassembly.
* gas/sparc/sparc.exp: Run new tests.
(bfd_elf32_bfd_is_target_special_symbol): Define.
* v850.h (V850_INVERSE_PCREL): Define.
* v850-dis.c (print_value): With V850_INVERSE_PCREL compute the
destination address by subtracting the operand from the current
address.
* v850-opc.c (insert_u16_loop): Disallow negative offsets. Store
a positive value in the insn.
(extract_u16_loop): Do not negate the returned value.
(D16_LOOP): Add V850_INVERSE_PCREL flag.
(ceilf.sw): Remove duplicate entry.
(cvtf.hs): New entry.
(cvtf.sh): Likewise.
(fmaf.s): Likewise.
(fmsf.s): Likewise.
(fnmaf.s): Likewise.
(fnmsf.s): Likewise.
(maddf.s): Restrict to E3V5 architectures.
(msubf.s): Likewise.
(nmaddf.s): Likewise.
(nmsubf.s): Likewise.
order to encode separately the msb and lsb of a register pair ; this will be
needed to encode the opcodes the same
way as Ti assembler does.
* gas/config/tc-tic6x.c: handle tic6x_coding_dreg_(msb|lsb) field coding types
and use it to encode register pair numbers when required.
* opcodes/tic6x-dis.c: decodes opcodes that have individual msb and lsb halves
in src1 & src2 fields ; discard the src1 (lsb) value and only use src2 (msb),
discarding bit 0, to follow what Ti SDK does in that case as any value in the
src1 field yields the same output with SDK disassembler.
* include/opcode/tic6x-opcode-table.h: modify absdp, dpint, dpsp, dptrunc,
rcpdp and rsqrdp opcodes to use the new field coding types.
* gas/testsuite/gas/tic6x/insns-c674x.d, gas/testsuite/gas/tic6x/insns-c674x.s
: add test case for the newly generated opcode but keep the old ones as they
seem legit as per Ti disassembler output.
opcodes/
* nios2-opc.c (nios2_builtin_regs): Add sstatus alias for ba register.
gas/testsuite/
* gas/nios2/nios2.exp: Run registers.
* gas/nios2/registers.d: New file.
* gas/nios2/registers.s: Likewise.
which also makes the disassembler output be in little
endian like it should be.
* metag/labelarithmetic.d: Fix the expected disassembler
output to be in little endian format
* metag/metacore12.d: likewise
* metag/metacore21.d: likewise
* metag/metacore21ext.d: likewise
* metag/metadsp21.d: likewise
* metag/metadsp21ext.d: likewise
* metag/metafpu.d: likewise
* metag/metafpuext.d: likewise
* metag/tls.d: likewise
* ld-metag/pcrel.d: Fix the expected disassembler
output to be in little endian format
* ld-metag/shared.d: likewise
* ld-metag/stub.d: likewise
* ld-metag/stub_pic_app.d: likewise
* ld-metag/stub_pic_shared.d: likewise
* ld-metag/stub_shared.d: likewise
* mips-dis.c (is_compressed_mode_p): Only match symbols from the
section disassembled.
binutils/testsuite/
* binutils-all/mips/mixed-micromips.d: New test.
* binutils-all/mips/mixed-mips16.d: New test.
* binutils-all/mips/mixed-micromips.s: New test source.
* binutils-all/mips/mixed-mips16.s: New test source.
* binutils-all/mips/mips.exp: New file.
2013-02-09 Jürgen Urban <JuergenUrban@gmx.de>
* config/tc-mips.c (CPU_HAS_LDC1_SDC1): New macro.
(macro): Use it. Assert that trunc.w.s is not used for r5900.
opcodes/
2013-02-09 Jürgen Urban <JuergenUrban@gmx.de>
* mips-opc.c (mips_builtin_opcodes): Enable l.d and s.d macros for
single-float. Disable ll, lld, sc and scd for EE. Disable the
trunc.w.s macro for EE.
gas/testsuite/
2013-02-09 Jürgen Urban <JuergenUrban@gmx.de>
* gas/mips/24k-triple-stores-2.d, gas/mips/24k-triple-stores-2.s,
gas/mips/micromips@24k-triple-stores-2.d: Move "sc" tests to...
* gas/mips/24k-triple-stores-2-llsc.d,
gas/mips/24k-triple-stores-2-llsc.s,
gas/mips/micromips@24k-triple-stores-2-llsc.d: ...these new tests.
* gas/mips/r5900-full.d, gas/mips/r5900-full.s: Verify that the
MIPS ISA level can be upgraded to support ll, sc, lld and scd.
* gas/mips/l_d-single.d, gas/mips/s_d-single.d,
gas/mips/r5900-nollsc.l, gas/mips/r5900-nollsc.s: New tests.
* gas/mips/mips.exp: Update accordingly. Add "nollsc" to r5900
properties.
2013-01-17 Yufeng Zhang <yufeng.zhang@arm.com>
* aarch64.h (aarch64_op): Remove OP_V_MOVI_B.
opcodes/
2013-01-17 Yufeng Zhang <yufeng.zhang@arm.com>
* aarch64-asm.c (aarch64_ins_advsimd_imm_modified): Handle 8-bit MOVI.
* aarch64-dis.c (aarch64_ext_advsimd_imm_modified): Likewise.
* aarch64-opc.c (operand_general_constraint_met_p): For
AARCH64_MOD_LSL, move the range check on the shift amount before the
alignment check; change to call set_sft_amount_out_of_range_error
instead of set_imm_out_of_range_error.
* aarch64-tbl.h (QL_SIMD_IMM_B): Replace NIL with LSL.
(aarch64_opcode_table): Remove the OP enumerator from the asimdimm
8-bit MOVI entry; change the 2nd operand from SIMD_IMM to
SIMD_IMM_SFT.
gas/
2013-01-17 Yufeng Zhang <yufeng.zhang@arm.com>
* config/tc-aarch64.c (output_operand_error_record): Change to output
the out-of-range error message as value-expected message if there is
only one single value in the expected range.
(programmer_friendly_fixup): Remove the handling of 8-bit MOVI with
LSL #0 as a programmer-friendly feature.
gas/testsuite/
2013-01-17 Yufeng Zhang <yufeng.zhang@arm.com>
* gas/aarch64/diagnostic.l: Update.
* gas/aarch64/movi.s: Add tests.
* gas/aarch64/movi.d: Update.
* gas/aarch64/programmer-friendly.s: Add comment.
* metag.h: New file.
* dis-asm.h (print_insn_metag): New declaration.
* metag.h: New file.
* Makefile.am: Add Meta.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.in: Add Meta.
* disassemble.c: Add Meta support.
* metag-dis.c: New file.
* Makefile.am: Add Meta.
* Makefile.in: Regenerate.
* archures.c (bfd_mach_metag): New.
* bfd-in2.h: Regenerate.
* config.bfd: Add Meta.
* configure: Regenerate.
* configure.in: Add Meta.
* cpu-metag.c: New file.
* elf-bfd.h: Add Meta.
* elf32-metag.c: New file.
* elf32-metag.h: New file.
* libbfd.h: Regenerate.
* reloc.c: Add Meta relocations.
* targets.c: Add Meta.
* Makefile.am: Add Meta.
* Makefile.in: Regenerate.
* config/tc-metag.c: New file.
* config/tc-metag.h: New file.
* configure.tgt: Add Meta.
* doc/Makefile.am: Add Meta.
* doc/Makefile.in: Regenerate.
* doc/all.texi: Add Meta.
* doc/as.texiinfo: Document Meta options.
* doc/c-metag.texi: New file.
* gas/metag/labelarithmetic.d: New file.
* gas/metag/labelarithmetic.s: New file.
* gas/metag/metacore12.d: New file.
* gas/metag/metacore12.s: New file.
* gas/metag/metacore21-invalid.l: New file.
* gas/metag/metacore21-invalid.s: New file.
* gas/metag/metacore21.d: New file.
* gas/metag/metacore21.s: New file.
* gas/metag/metacore21ext.d: New file.
* gas/metag/metacore21ext.s: New file.
* gas/metag/metadsp21-invalid.l: New file.
* gas/metag/metadsp21-invalid.s: New file.
* gas/metag/metadsp21.d: New file.
* gas/metag/metadsp21.s: New file.
* gas/metag/metadsp21ext.d: New file.
* gas/metag/metadsp21ext.s: New file.
* gas/metag/metafpu21.d: New file.
* gas/metag/metafpu21.s: New file.
* gas/metag/metafpu21ext.d: New file.
* gas/metag/metafpu21ext.s: New file.
* gas/metag/metag.exp: New file.
* gas/metag/tls.d: New file.
* gas/metag/tls.s: New file.
* Makefile.am: Add Meta.
* Makefile.in: Regenerate.
* configure.tgt: Add Meta.
* emulparams/elf32metag.sh: New file.
* emultempl/metagelf.em: New file.
* ld-elf/merge.d: Mark Meta as xfail.
* ld-gc/start.d: Skip this test on Meta.
* ld-gc/personality.d: Skip this test on Meta.
* ld-metag/external.s: New file.
* ld-metag/metag.exp: New file.
* ld-metag/pcrel.d: New file.
* ld-metag/pcrel.s: New file.
* ld-metag/shared.d: New file.
* ld-metag/shared.r: New file.
* ld-metag/shared.s: New file.
* ld-metag/stub.d: New file.
* ld-metag/stub.s: New file.
* ld-metag/stub_pic_app.d: New file.
* ld-metag/stub_pic_app.r: New file.
* ld-metag/stub_pic_app.s: New file.
* ld-metag/stub_pic_shared.d: New file.
* ld-metag/stub_pic_shared.s: New file.
* ld-metag/stub_shared.d: New file.
* ld-metag/stub_shared.r: New file.
* ld-metag/stub_shared.s: New file.
* binutils/readelf.c: (guess_is_rela): Add EM_METAG.
(dump_relocations): Add EM_METAG.
(get_machine_name): Correct case for Meta.
(is_32bit_abs_reloc): Add support for Meta ADDR32 reloc.
(is_none_reloc): Add support for Meta NONE reloc.
* bfd-in2.h: Add support for MIPS r5900
* config.bfd: Add support for Sony Playstation 2
* cpu-mips.c: Add support for MIPS r5900
* elfxx-mips.c: Add support for MIPS r5900 (extension of r4000)
* config/tc-mips.c: Add support for MIPS r5900
Add M_LQ_AB and M_SQ_AB to support large values for instructions lq and sq.
* config/tc-mips.c (can_swap_branch_p, get_append_method): Detect some conditional short loops to fix a bug on the r5900 by NOP in the branch delay slot.
* config/tc-mips.c (M_MUL): Support 3 operands in multu on r5900.
* config/tc-mips.c (M_TRUNCWS): Support trunc.w.s on r5900 in MIPS ISA I.
* config/tc-mips.c (s_mipsset): Force 32 bit floating point on r5900.
* configure.in: Detect CPU type when target string contains r5900 (e.g. mips64r5900el-linux-gnu).
* config/tc-mips.c (mips_ip): Check parameter range of instructions mfps and mtps on r5900.
* elf/mips.h: Add MIPS machine variant number for r5900 which is compatible with old Playstation 2 software.
* opcode/mips.h: Add support for r5900 instructions including lq and sq.
* configure.tgt: Support ELF files for Sony Playstation 2 (for ps2dev and ps2sdk).
* emulparams/elf32lr5900n32.sh: Create linker script for Sony Playstation 2 ELF files using MIPS ABI n32.
* emulparams/elf32lr5900.sh: Create linker script for Sony Playstation 2 ELF files using MIPS ABI o32.
* Makefile.am: Add linker scripts for Sony Playstation 2 ELF files.
* opcodes/mips-dis.c: Add names for CP0 registers of r5900.
* opcodes/mips-opc.c: Add M_SQ_AB and M_LQ_AB to support larger range for instructions sq and lq.
* opcodes/mips-opc.c: Add support for MIPS r5900 CPU.
Add support for 128 bit MMI (Multimedia Instructions).
Add support for EE instructions (Emotion Engine).
Disable unsupported floating point instructions (64 bit and undefined compare operations).
Enable instructions of MIPS ISA IV which are supported by r5900.
Disable 64 bit co processor instructions.
Disable 64 bit multiplication and division instructions.
Disable instructions for co-processor 2 and 3, because these are not supported (preparation for later VU0 support (Vector Unit)).
Disable cvt.w.s because this behaves like trunc.w.s and the correct execution can't be ensured on r5900.
Add trunc.w.s using the opcode encoding of cvt.w.s on r5900. This will confuse less developers and compilers.
binutils/
2013-01-02 H.J. Lu <hongjiu.lu@intel.com>
* version.c (print_version): Update copyright year to 2013.
gas/
2013-01-02 H.J. Lu <hongjiu.lu@intel.com>
* as.c (parse_args): Update copyright year to 2013.
ld/
2013-01-02 H.J. Lu <hongjiu.lu@intel.com>
* ldver.c (ldversion): Update copyright year to 2013.
opcodes/
2013-01-02 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (process_copyright): Update copyright year to 2013.
