We see some fails in watchpoint-reuse-slot.exp on aarch64-linux, because
it sets some HW breakpoint on some address doesn't meet the alignment
requirements by kernel, kernel will reject the
ptrace (PTRACE_SETHBPREGS) call, and some fails are caused, for example:
(gdb) PASS: gdb.base/watchpoint-reuse-slot.exp: always-inserted off: watch x hbreak: : width 1, iter 0: base + 0: delete $bpnum
hbreak *(buf.byte + 0 + 1)^M
Hardware assisted breakpoint 80 at 0x410a61^M
(gdb) PASS: gdb.base/watchpoint-reuse-slot.exp: always-inserted off: watch x hbreak: : width 1, iter 0: base + 1: hbreak *(buf.byte + 0 + 1)
stepi^M
Warning:^M
Cannot insert hardware breakpoint 80.^M
Could not insert hardware breakpoints:^M
You may have requested too many hardware breakpoints/watchpoints.^M
^M
(gdb) FAIL: gdb.base/watchpoint-reuse-slot.exp: always-inserted off: watch x hbreak: : width 1, iter 0: base + 1: stepi advanced
hbreak *(buf.byte + 0 + 1)^M
Hardware assisted breakpoint 440 at 0x410a61^M
Warning:^M
Cannot insert hardware breakpoint 440.^M
Could not insert hardware breakpoints:^M
You may have requested too many hardware breakpoints/watchpoints.^M
^M
(gdb) FAIL: gdb.base/watchpoint-reuse-slot.exp: always-inserted on: watch x hbreak: : width 1, iter 0: base + 1: hbreak *(buf.byte + 0 + 1)
This patch is to skip some tests by checking proc valid_addr_p.
We can handle other targets in valid_addr_p too.
gdb/testsuite:
2015-03-16 Yao Qi <yao.qi@linaro.org>
* gdb.base/watchpoint-reuse-slot.exp (valid_addr_p): New proc.
(top level): Skip tests if valid_addr_p returns false for
$cmd1 or $cmd2.
Sync with GCC
2014-11-17 Bob Dunlop <bob.dunlop@xyzzy.org.uk>
* mt-ospace (CFLAGS_FOR_TARGET): Append -g -Os rather than
overwriting.
(CXXFLAGS_FOR_TARGET): Similarly.
Without this, not all registers were present in the core generated by
gcore. For example, running 'gcore' on a program without examining
the vector registers (SSE or AVX) would store all the vector registers
as zeros because they were not pulled into the regcache. Running
'info vector' before 'gcore' would store the correct values in the
core since it populated the regcache. For Linux processes, a similar
operation is achieved by having the thread iterator callback invoke
target_fetch_registers on each thread before its corresponding
register notes are dumped.
gdb/ChangeLog:
* fbsd-tdep.c (fbsd_make_corefile_notes): Fetch all target registers
before writing core register notes.
Fixes linking an --enable-build-with-cxx build on mingw:
../readline/terminal.c:278: undefined reference to `tgetnum'
../readline/terminal.c:297: undefined reference to `tgetnum'
../readline/libreadline.a(terminal.o): In function `get_term_capabilities':
../readline/terminal.c:427: undefined reference to `tgetstr'
../readline/libreadline.a(terminal.o): In function `_rl_init_terminal_io':
[etc.]
gdb/ChangeLog:
2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
Pedro Alves <palves@redhat.com>
* gdb_curses.h (tgetnum): Mark with EXTERN_C.
* stub-termcap.c (tgetent, tgetnum, tgetflag, tgetstr, tputs)
(tgoto): Wrap with extern "C".
src/gdb/stub-termcap.c: In function 'int tputs(char*, int, int (*)())':
src/gdb/stub-termcap.c:67:22: error: too many arguments to function
outfun (*string++);
^
gdb/ChangeLog:
2015-03-16 Pedro Alves <palves@redhat.com>
Yuanhui Zhang <asmwarrior@gmail.com>
* stub-termcap.c (tputs): Change prototype.
Building mingw GDB with --enable-build-with-cxx shows:
../../binutils-gdb/gdb/windows-nat.c: At global scope:
../../binutils-gdb/gdb/windows-nat.c:192:1: error: conflicting declaration 'typedef struct thread_info_struct thread_info'
thread_info;
^
In file included from ../../binutils-gdb/gdb/windows-nat.c:52:0:
../../binutils-gdb/gdb/gdbthread.h:160:8: error: 'struct thread_info' has a previous declaration as 'struct thread_info'
struct thread_info
^
Simply rename the structure to avoid the conflict.
gdb/ChangeLog:
2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
Pedro Alves <palves@redhat.com>
* windows-nat.c (struct thread_info_struct): Rename to ...
(struct windows_thread_info_struct): ... this.
(thread_info): Rename to ...
(windows_thread_info): ... this.
All users updated.
Rather than manually include tconfig.h when we think we'll need it (which
is error prone as it can define symbols we expect from config.h), have it
be included directly by config.h. Since we know we have to include that
header everywhere already, this will make sure tconfig.h isn't missed.
It should also be fine as tconfig.h is supposed to be simple and only set
up a few core defines for the target.
This allows us to stop symlinking it in place all the time and just use
it straight out of the respective source directory.
Pull out the duplicated dv_sockser_install prototype from the tconfig.in
files and put it in the one place it gets used -- sim-module.c. This is
still arguably incorrect, but it's better than the status quo where the
tconfig.in has to include header files and duplicate the dv-sockser func.
The tconfig header is meant to be simple and contain a target defines.
This dates back to the start of the repo, but has never really been used.
The sim-inline.c file has been checked in to the source, and attempts to
build it in the build tree leads to a circular dep warning from make. It
also doesn't produce a file that is usable -- it can't be compiled. Punt!
We want people to stop using the run.c frontend, but it's hard to notice
when it's still set as the default. Lets flip things so nrun.c is the
default, and users of run.c will get an error by default. We turn that
error into a warning for existing sims so we don't break them -- this is
mostly meant for people starting new ports.
When downgrading from GD to IE model we rewrite the call to
__tls_get_offset to a 64 bit load instruction. This relies on the fact
that the additional relocation for the call target has already been
executed when doing the rewrite.
f1018: e3 20 d0 00 00 04 lg %r2,0(%r13)
f101e: c0 e5 00 00 00 00 brasl %r14,f101e <__res_init+0x1e>
f101e: R_390_TLS_GDCALL __libc_resp
f1020: R_390_PLT32DBL __tls_get_offset+0x2
0000000f1020 39f6c00000014 R_390_PLT32DBL 0000000000000000 __tls_get_offset + 2
0000000f101e 3afb700000026 R_390_TLS_GDCALL 0000000000000008 __libc_resp + 0
Due to the reloc sorting the order changed an the PLT32DBL reloc is
executed after the rewrite and overwrites part of the load instruction
with garbage.
bfd/
2015-03-14 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* elf-s390-common.c (elf_s390_elf_sort_relocs_p): Don't sort
relocs against code sections.
* elf32-s390.c: Define elf_backend_sort_relocs_p.
* elf64-s390.c: Likewise.
gdb/ChangeLog
2015-03-14 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
* NEWS: New Removed targets and native configurations.
Since sim-endian.c doesn't actually use sim_io funcs, it's weird to
include the sim-io.h header here. It's doing so only for the assert
header. So lets relocate the include to the right place.
opcodes/
* mips-opc.c (decode_mips_operand): Fix constraint issues
with u and y operands.
gas/testsuite/
* gas/mips/mips.exp: Added branch constraints testcase.
* gas/mips/r6-branch-constraints.s: New test.
* gas/mips/r6-branch-constraints.l: New test.
IIUC it is a pre-requisite for IPv6 support, some UNICes do not support
getaddrinfo required for IPv6. But coincidentally such UNICes are no longer
really supported by GDB. Therefore it was concluded we can remove all such
UNICes and then we can implement IPv6 easily with getaddrinfo.
In mail
Re: getaddrinfo available on all GDB hosts? [Re: [PATCH v2] Add IPv6 support for remote TCP connections]
Message-ID: <20140211034157.GG5485@adacore.com>
https://sourceware.org/ml/gdb-patches/2014-02/msg00333.html
Joel said:
So I chose HP-UX first for this patch.
gdb/ChangeLog
2014-10-16 Jan Kratochvil <jan.kratochvil@redhat.com>
Remove HPUX.
* Makefile.in (ALL_64_TARGET_OBS): Remove ia64-hpux-tdep.o.
(ALL_TARGET_OBS): Remove hppa-hpux-tdep.o, solib-som.o and solib-pa64.o.
(HFILES_NO_SRCDIR): Remove solib-som.h, inf-ttrace.h, solib-pa64.h and
ia64-hpux-tdep.h, solib-ia64-hpux.h.
(ALLDEPFILES): Remove hppa-hpux-tdep.c, hppa-hpux-nat.c,
ia64-hpux-nat.c, ia64-hpux-tdep.c, somread.c and solib-som.c.
* config/djgpp/fnchange.lst: Remove hppa-hpux-nat.c and
hppa-hpux-tdep.c.
* config/ia64/hpux.mh: Remove file.
* config/pa/hpux.mh: Remove file.
* configure: Rebuilt.
* configure.ac (dlgetmodinfo, somread.o): Remove.
* configure.host (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
(ia64-*-hpux*): Remove its float format exception.
* configure.tgt (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
* hppa-hpux-nat.c: Remove file.
* hppa-hpux-tdep.c: Remove file.
* hppa-tdep.c (struct hppa_unwind_info, struct hppa_objfile_private):
Move them here from hppa-tdep.h
(hppa_objfile_priv_data, hppa_init_objfile_priv_data): Make it static.
(hppa_frame_prev_register_helper): Remove HPPA_FLAGS_REGNUM exception.
* hppa-tdep.h (struct hppa_unwind_info, struct hppa_objfile_private):
Move them to hppa-tdep.c.
(hppa_objfile_priv_data, hppa_init_objfile_priv_data): Remove
declarations.
* ia64-hpux-nat.c: Remove file.
* ia64-hpux-tdep.c: Remove file.
* ia64-hpux-tdep.h: Remove file.
* inf-ttrace.c: Remove file.
* inf-ttrace.h: Remove file.
* solib-ia64-hpux.c: Remove file.
* solib-ia64-hpux.h: Remove file.
* solib-pa64.c: Remove file.
* solib-pa64.h: Remove file.
* solib-som.c: Remove file.
* solib-som.h: Remove file.
* somread.c: Remove file.
Use kinfo_getvmmap from libutil on FreeBSD to enumerate memory
regions in a running process instead of /proc/<pid>/map. FreeBSD systems
do not mount procfs by default, but kinfo_getvmmap uses a sysctl that
is always available.
Skip memory regions for devices as well as regions an application has
requested to not be dumped via the MAP_NOCORE flag to mmap or
MADV_NOCORE advice to madvise.
gdb/ChangeLog:
* configure.ac: AC_CHECK_LIB(util, kinfo_getvmmap).
* configure: Regenerate.
* config.in: Regenerate.
* fbsd-nat.c [!HAVE_KINFO_GETVMMAP] (fbsd_read_mapping): Don't
define.
(fbsd_find_memory_regions): Use kinfo_getvmmap to
enumerate memory regions if present.
- Do not leave operators at end-of-line.
- Fix block indentation in if-else chain.
gdb/ChangeLog:
* amd64fbsd-tdep.c (amd64fbsd_sigtramp_p): Style fixes.
* i386fbsd-tdep.c: Fix style in various gdb_static_assert
expressions.
(i386fbsd_sigtramp_p): Likewise.
2015-03-13 Jiong Wang <jiong.wang@arm.com>
gas/
* config/tc-aarch64.c (warn_unpredictable_ldst): Don't warn on reg number 31.
gas/testsuite/
* gas/aarch64/diagnostic.s: New testcases.
* gas/aarch64/diagnostic.l: New error match.
2015-03-13 Jiong Wang <jiong.wang@arm.com>
gas/
* config/tc-aarch64.h (SUB_SEGMENT_ALIGN): Define to be zero.
gas/testsuite/
* gas/aarch64/tail_padding.s: New testcase.
* gas/aarch64/tail_padding.d: New expectation file.
PR gas/17444
* config/tc-arm.h (MD_APPLY_SYM_VALUE): Pass the current segment
to arm_apply_sym_value. Update prototype.
* config/tc-arm.c (arm_apply_sym_value): Add segment argument.
Do not apply the value if the symbol is in a different segment to
the current segment.
This commit creates the "set/show sysroot" commands using
add_setshow_optional_filename_cmd to allow the sysroot to
be restored to empty after being set.
gdb/ChangeLog:
* solib.c (_initialize_solib): Make "set/show sysroot" use
add_setshow_optional_filename_cmd so it can be restored to
empty after being set.
Newer version of GCC pass -z relro to the linker, but incremental linking
does not support relro. This patch adds a check to complain about the
conflict, and changes the testsuite to pass -z norelro to the incremental
tests.
2015-03-11 Cary Coutant <ccoutant@google.com>
gold/
* options.cc (General_options::finalize): Don't allow -z relro
with incremental linking.
* testsuite/Makefile.am (incremental_test): Add -z norelro.
(incremental_test_2): Likewise.
(incremental_test_3): Likewise.
(incremental_test_4): Likewise.
(incremental_test_5): Likewise.
(incremental_test_6): Likewise.
(incremental_copy_test): Likewise.
(incremental_common_test_1): Likewise.
(incremental_comdat_test_1): Likewise.
* testsuite/Makefile.in: Regenerate.
This commits cleans up the gdb/breakpoint.c file and moves everything
that is related to the 'catch syscall' command to the new file
gdb/break-catch-syscall.c. This is just code movement, and the only
new part is the adjustment needed on 'catching_syscall_number' to use
the new 'breakpoint_find_if' function insted of relying on the
ALL_BREAKPOINTS macro.
Tested by running the 'gdb.base/catch-syscall.exp' testcase.
gdb/ChangeLog:
2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILES): New source break-catch-syscall.c.
(COMMON_OBS): New object break-catch-syscall.o.
* break-catch-syscall.c: New file.
* breakpoint.c: Remove inclusion of "xml-syscall.h".
(syscall_catchpoint_p): Move declaration to break-catch-syscall.c
(struct syscall_catchpoint): Likewise.
(dtor_catch_syscall): Likewise.
(catch_syscall_inferior_data): Likewise.
(struct catch_syscall_inferior_data): Likewise.
(get_catch_syscall_inferior_data): Likewise.
(catch_syscall_inferior_data_cleanup): Likewise.
(insert_catch_syscall): Likewise.
(remove_catch_syscall): Likewise.
(breakpoint_hit_catch_syscall): Likewise.
(print_it_catch_syscall): Likewise.
(print_one_catch_syscall): Likewise.
(print_mention_catch_syscall): Likewise.
(print_recreate_catch_syscall): Likewise.
(catch_syscall_breakpoint_ops): Likewise.
(syscall_catchpoint_p): Likewise.
(create_syscall_event_catchpoint): Likewise.
(catch_syscall_split_args): Likewise.
(catch_syscall_command_1): Likewise.
(is_syscall_catchpoint_enabled): Likewise.
(catch_syscall_enabled): Likewise.
(catching_syscall_number): Likewise.
(catch_syscall_completer): Likewise.
(clear_syscall_counts): Likewise.
(initialize_breakpoint_ops): Move initialization of syscall
catchpoints to break-catch-syscall.c.
(_initialize_breakpoint): Move code related to syscall catchpoints
to break-catch-syscall.c.
This commit implements the 'breakpoint_find_if' function, which allows
code external to gdb/breakpoint.c to iterate through the list of
'struct breakpoint *'. This is needed in order to create the
'gdb/break-catch-syscall.c' file, because one of its functions
(catching_syscall_number) needs to do this iteration.
My first thought was to share the ALL_BREAKPOINTS* macros on
gdb/breakpoint.h, but they use a global variable local to
gdb/breakpoint.c, and I did not want to share that variable. So, in
order to keep the minimal separation, I decided to implement this
way of iterating through the existing 'struct breakpoint *'.
This function was based on BFD's bfd_sections_find_if. If the
user-provided function returns 0, the iteration proceeds. Otherwise,
the iteration stops and the function returns the 'struct breakpoint *'
that is being processed. This means that the return value of this
function can be either NULL or a pointer to a 'struct breakpoint'.
gdb/ChangeLog:
2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
* breakpoint.c (breakpoint_find_if): New function.
* breakpoint.h (breakpoint_find_if): New prototype.
