PR/symtab 11766:
* gdb/objfiles.h (struct objfile) <addr_low>: New field.
* gdb/solib.c (solib_read_symbols): Check for addr_low in
equality test for objfile, initialize addr_low if needed.
2011-01-25 Ken Werner <ken.werner@de.ibm.com>
* gdb.opencl/convs_casts.cl: Move program scope variables into the
OpenCL kernel function. Add a comment as marker. Add address space
qualifiers for the remaining program scope variables.
* gdb.opencl/datatypes.cl: Likewise.
* gdb.opencl/operators.cl: Likewise.
* gdb.opencl/vec_comps.cl: Likewise.
* gdb.opencl/convs_casts.exp: Replace gdb_test_multiple by gdb_test.
Add breakpoint at the marker comment.
* gdb.opencl/datatypes.exp: Likewise.
* gdb.opencl/operators.exp: Likewise.
* gdb.opencl/vec_comps.exp: Likewise.
boolean. Make sure to always pass a value that matches the
contents buffer to callees. Preserve `address' for following
iterations.
* value.c (value_contents_for_printing_const): New.
(value_address): Constify value argument.
* value.h (value_contents_for_printing_const): Declare.
(value_address): Constify value argument.
(init_regcache_descr): Remove sizeof_raw_register_valid_p
overallocate hack.
(regcache_xmalloc): Rename to ...
(regcache_xmalloc_1): ... this. Add `readonly_p' parameter.
Allocate the regcache type accordingly.
(regcache_xmalloc): New as wrapper around regcache_xmalloc_1.
(regcache_xfree): Asser the source is also readonly. Copy sizeof
cooked registers, not raw.
(regcache_dup_no_passthrough): Delete.
(get_thread_arch_regcache): Use regcache_xmalloc_1.
* h8300-tdep.c (h8300_push_dummy_call): Tweak comment to not
mention obsolete write_register_bytes.
* regcache.h (regcache_dup_no_passthrough): Delete declaration.
* remote-fileio.c: Include target.h.
(remote_fileio_write_bytes): Delete.
(remote_fileio_func_open, remote_fileio_func_write)
(remote_fileio_func_rename, remote_fileio_func_unlink): Use
target_read_memory.
(remote_fileio_func_stat): Use target_read_memory and
target_write_memory.
(remote_fileio_func_gettimeofday): Use target_write_memory.
(remote_fileio_func_system): Use target_read_memory.
* remote.c (remote_write_bytes): Make it static.
(remote_read_bytes): Don't handle partial reads here.
* remote.h (remote_read_bytes): Delete declaration.
* server.h (decode_xfer_write): Change prototype.
* remote-utils.c (decode_xfer_write): Remove `annex' parameter,
and don't extract the annex here.
* server.c (decode_xfer_read): Remove `annex' parameter,
and don't extract the annex here.
(decode_xfer): New.
(struct qxfer): New.
(handle_qxfer_auxv, handle_qxfer_features, handle_qxfer_libraries)
(handle_qxfer_osdata, handle_qxfer_siginfo, handle_qxfer_spu)
(handle_qxfer_statictrace): New functions, abstracted out from
handle_query, and made to use the struct qxfer interface.
(handle_threads_qxfer_proper): Rename to ...
(handle_qxfer_threads_proper): ... this.
(handle_threads_qxfer): Rename to ...
(handle_qxfer_threads): ... this. Adjust.
(qxfer_packets): New array.
(handle_qxfer): New function.
(handle_query): Use handle_qxfer.
Don't lose embedded_offset in printing routines throughout.
gdb/
* valprint.h (val_print_array_elements): Change prototype.
* valprint.c (val_print_array_elements): Add `embedded_offset'
parameter, and adjust to pass it down to val_print, while passing
`valaddr' or `address' unmodified. Take embedded_offset into
account when checking repetitions.
* c-valprint.c (c_val_print): Pass embedded_offset to
val_print_array_elements instead of adjusting `valaddr' and
`address'.
* m2-valprint.c (m2_print_array_contents, m2_val_print): Pass
embedded_offset to val_print_array_elements instead of adjusting
`valaddr'.
* p-lang.h (pascal_object_print_value_fields): Adjust prototype.
* p-valprint.c (pascal_val_print): Pass embedded_offset to
val_print_array_elements and pascal_object_print_value_fields
instead of adjusting `valaddr'.
(pascal_object_print_value_fields): Add `offset' parameter, and
adjust to use it.
(pascal_object_print_value): Add `offset' parameter, and adjust to
use it.
(pascal_object_print_static_field): Use
value_contents_for_printing/value_embedded_offset, rather than
value_contents.
* ada-valprint.c (val_print_packed_array_elements): Add `offset'
parameter, and adjust to use it. Use
value_contents_for_printing/value_embedded_offset, rather than
value_contents.
(ada_val_print): Rename `valaddr0' parameter to `valaddr'.
(ada_val_print_array): Add `offset' parameter, and adjust to use
it.
(ada_val_print_1): Rename `valaddr0' parameter to `valaddr', and
`embedded_offset' to `offset'. Don't re-adjust `valaddr'.
Instead work with offsets. Use
value_contents_for_printing/value_embedded_offset, rather than
value_contents. Change `defer_val_int' local type to CORE_ADDR,
and use value_from_pointer to extract a target pointer, rather
than value_from_longest.
(print_variant_part): Add `offset' parameter. Replace
`outer_valaddr' parameter by a new `outer_offset' parameter.
Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
(ada_value_print): Use
value_contents_for_printing/value_embedded_offset, rather than
value_contents.
(print_record): Add `offset' parameter, and adjust to pass it
down.
(print_field_values): Add `offset' parameter. Replace
`outer_valaddr' parameter by a new `outer_offset' parameter.
Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
Use value_contents_for_printing/value_embedded_offset, rather than
value_contents.
* d-valprint.c (dynamic_array_type): Use
value_contents_for_printing/value_embedded_offset, rather than
value_contents.
* jv-valprint.c (java_print_value_fields): Add `offset' parameter.
Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
(java_print_value_fields): Take `offset' into account. Don't
re-adjust `valaddr'. Instead pass down adjusted offsets.
(java_val_print): Take `embedded_offset' into account. Pass it to
java_print_value_fields.
* f-valprint.c (f77_print_array_1): Add `embedded_offset'
parameter. Don't re-adjust `valaddr' or `address'. Instead pass
down adjusted offsets.
(f77_print_array): Add `embedded_offset' parameter. Pass it down.
(f_val_print): Take `embedded_offset' into account.
gdb/testsuite/
* gdb.base/printcmds.c (some_struct): New struct and instance.
* gdb.base/printcmds.exp (test_print_repeats_embedded_array): New
procedure.
<global scope>: Call it.
The real purpose of this setting is really to override what the debugger
would otherwise guess from checking the stdin settings. So it seems
more natural to see this setting being handled inside gdb_has_a_terminal
rather than input_is_terminal (which checks for other things, such as
whether the input is stdin, for instance).
This patch also adjust the command help and the associated section in
the GDB Manual to be a little clearer about that.
gdb/ChangeLog:
* inflow.c: Include "gdbcmd.h".
(interactive_mode): New static global, moved here from top.c.
(show_interactive_mode): New function, moved here from top.c.
use gdb_has_a_terminal instead of input_from_terminal_p to
determine the current mode.
(gdb_has_a_terminal): Add handling of the "iteractive-mode"
setting.
(_initialize_inflow): Add the "set/show interactive-mode"
commands. Moved here from top.c, after having adjusted slightly
the help text.
* top.c (interactive_mode, show_interactive_mode): Delete, moved
to inflow.c.
(input_from_terminal_p): Remove handling of "interactive-mode"
setting, moved to infow.c.
(init_main): Remove creation of the "set/show interactive-mode"
commands, moved to inflow.c.
gdb/doc/ChangeLog:
* gdb.texinfo (Other Misc Settings): Rework part of the
documentation of the "set interactive mode" command.
2011-01-21 Ken Werner <ken.werner@de.ibm.com>
* lib/opencl.exp (skip_opencl_tests): Add missing compile_flags
argument to the gdb_compile_opencl_hostapp call.
Same problem as before: We were downcasting the character value from
int to unsigned char, which caused an overflow. The reason why we did
not see this problem before is probably related to the fact that
we're using stabs on AIX and thus characters types are defined as
a TYPE_CODE_INT (or TYPE_CODE_RANGE?).
gdb/ChangeLog:
* ada-valprint.c (ada_print_scalar): Remove unsigned char downcast.
(ada_val_print_1): Likewise.
On powerpc, the prologue scanner reads instruction after instruction,
and just skips instructions that do not affect a frame. This means
that it does not stop if if finds and unexpected instruction (which
could possibly happen with optimization, I presume). To avoid scanning
too many instructions, it tries to establish an upper limit.
The upper limit is first computed using the debugging (line) info,
but if that fails, it falls back on an arbitrary 100 bytes (or 25
instructions). The problem is that, if the function is shorter than
those 25 instructions, we run the risk of skipping the entire function
and returning a PC that's outside our function.
In the event where we can find a symbol for a given PC (and therefore
can determine function start and end addresses), but cannot find an
upper limit using skip_prologue_using_sal, then we can at least limit
make sure that the 25 instructions do not put us beyour our function.
If it does, then further reduce the upper-limit to the end of the function.
gdb/ChangeLog:
* rs6000-tdep.c (rs6000_skip_prologue): Make sure that the prologue
upper limit address is not greater than the function end address
when the upper limit could not be computed using the debugging
info.
for internal variables.
(last_was_structop): New static variable.
(COMPLETE): New token.
(field_exp): New rule to group all '.' suffix handling.
Add mark_struct_expression calls when approriate to be able
to correctly find fields for completion.
(yylex): Adapt to handle field completion and set INTVAR when
required.
Wide_Characters and Wide_Wide_Characters are incorrectly printed.
Consider for instance:
Medium : Wide_Character := Wide_Character'Val(16#dead#);
Trying to print the value of this variable yields:
(gdb) p medium
$1 = 57005 '["ad"]'
The integer value is correct (57005 = 0xdead), but the character
representation is not, it should be:
$1 = 57005 '["dead"]'
Same for Wide_Wide_Characters.
There were two issues:
(a) The first issue was in ada-valprint, where we were assuming
that character types were 1 byte long;
(b) The second problem was in c-valprint, where we were down-casting
the integer value of the character to type `unsigned char',
causing use to lose all but the lowest byte.
gdb/ChangeLog:
* ada-valprint. (ada_printchar): Use the correct type length
in call to ada_emit_char.
* c-valprint.c (c_val_print): Remove cast in call to LA_PRINT_CHAR.
gdb/ChangeLog:
* ia64-hpux-nat.c (ia64_hpux_fetch_register): Remove trailing
new-line at end of warning message.
(ia64_hpux_store_register): Remove trailing new-line at end of
error message.
* ia64-hpux-tdep.c: Rephrase comment.
* solib-ia64-hpux.c (struct dld_info): Change type of field
dld_flags from "long long" to ULONGEST.
This function is unused, and the default formatting routine does
just fine, I think. On pa-hpux:
[New process 12565, lwp 2513]
[New process 12565, lwp 2514]
So this patch deletes it.
gdb/ChangeLog:
* hpux-thread.c (hpux_pid_to_str): Delete.
This fixes the printing of Wide_Wide_String objects. For instance,
consider:
My_WWS : Wide_Wide_String := " helo";
Before this patch is applied, GDB prints:
(gdb) print my_wws
$1 = " ["00"]h["00"]e"
gdb/ChangeLog:
* ada-valprint.c (ada_emit_char): Remove strange code.
Check that c is <= UCHAR_MAX before passing it to isascii.
(char_at): Do not assume that TYPE_LEN is either 1 or 2.
When interactive-mode is not auto, GDB always uses that setting to
determine whether to act as if the input stream is a terminal or not.
However, this setting should only be honored if the input stream is
the standard input stream. Otherwise, we run into trouble while
source-ing a GDB script, as shown below (on x86_64-linux):
% cat script
print 1
print 2
% gdb -q
(gdb) set interactive-mode on
(gdb) source script
(gdb) print 3
$1 = 3
The lack of output and the fact that the "print 3" command returned
a value saved in $1 (as opposed to $3) indicates that the script was
not even evaluated at all.
gdb/ChangeLog:
* top.c (input_from_terminal_p): Restrict the use of interactive_mode
to the case where instream is stdin.
gdb/testsuite/ChangeLog:
* gdb.base/interact.exp: New testcase.
We have two stacks to deal with on ia64, when making a function call.
The first is the usual stack frame, and the second is the register
stack frame. On ia64-linux, the register frame is setup by adjusting
the BSP register. Unfortunately for us, the HP-UX kernel does not allow
the debugger to change the value of the BSP.
To work around that limitation, the method I am using here is to push
some assembly code on the stack. This assembly code contains, among
other things, a call to the alloc insn, which sets up our frame for us.
An extensive comment in ia64-hpux-tdep.c explains the entire procedure.
Despite this approach, most of the code in ia64-tdep.c which sets up
the function call is still applicable - and only a few things need
to be done differently: For instance, instead of changing the BSP,
we do nothing. We store the parameters at a different location, etc.
So this patch also adjusts the inf-call code in ia64-tdep.c to make it
a little more extensible: I create a new ia64_infcall_ops structure
which allows an ABI to define how the few things that need to be
differentiated.
Another element that turned out to be necessary but is more of a detail
is that the computation of the linkage pointer needs to be handled
specially for symbols inside shared libraries. This is especially
visible when calling malloc, which happens everytime memory needs to
be allocated in inferior memory... The special treatment included
again the necessity to use some routines only available on the host.
So another target object TARGET_OBJECT_HPUX_SOLIB_GOT was created for
that purpose.
gdb/ChangeLog:
* ia64-tdep.h (struct regcache): Forward declare.
(struct ia64_infcall_ops): New struct type.
(struct gdbarch_tdep): New fields "find_global_pointer_from_solib"
and "infcall_ops".
* ia64-tdep.c (ia64_find_global_pointer_from_dynamic_section):
Renames ia64_find_global_pointer.
(ia64_find_global_pointer, ia64_allocate_new_rse_frame)
(ia64_store_argument_in_slot, ia64_set_function_addr: New function.
(ia64_push_dummy_call): Adjust to use the new tdep ia64_infocall_ops
methods.
(ia64_infcall_ops): New static global constant.
(ia64_gdbarch_init): Set tdep->infcall_ops.
* ia64-hpux-nat.c (ia64_hpux_xfer_solib_got): New function.
(ia64_hpux_xfer_partial): Add TARGET_OBJECT_HPUX_SOLIB_GOT handing.
* ia64-hpux-tdep.c: Include "regcache.h", "gdbcore.h" and "inferior.h".
(ia64_hpux_dummy_code): New static global constant.
(ia64_hpux_push_dummy_code, ia64_hpux_allocate_new_rse_frame)
(ia64_hpux_store_argument_in_slot, ia64_hpux_set_function_addr)
(ia64_hpux_dummy_id, ia64_hpux_find_global_pointer_from_solib):
New function.
(ia64_hpux_infcall_ops): New static global constant.
(ia64_hpux_init_abi): Install gdbarch and tdep methods needed
for inferior function calls to work properly on ia64-hpux.
This fixes unwinding from a thread that is stopped inside a system call.
This can be seen when switching to a thread that is stopped doing a
pthread_cond_wait, for instance...
The comments inside the code should explain what is happening in our
case (the HP-UX exception in the case of system calls): Under certain
circumstances (program stopped inside syscall), the offset to apply to
the current BSP in order to compute the previous BSP is not the usual
CFM & 0x7f.
We parts in this patch:
1. Figuring out that we are stopped inside a syscal: This requires
a TT_LWP_RUREGS ttrace call, which is not directly possible from
ia64-tdep.c. So use defined a new TARGET_OBJECT_HPUX_UREGS object
to request it from the -nat side.
2. Add a gdbarch_tdep method that allows us to change the default
behavior on ia64-hpux, permitting us to have a different "size of
register frame" in that one particular case.
gdb/ChangeLog:
* target.h (enum target_object): Add TARGET_OBJECT_HPUX_UREGS.
* ia64-tdep.h (struct frame_info): forward declaration.
(struct gdbarch_tdep): Add field size_of_register_frame.
* ia64-tdep.c (ia64_access_reg): Use tdep->size_of_register_frame
to determine the size of the register frame.
(ia64_size_of_register_frame): New function.
(ia64_gdbarch_init): Set tdep->size_of_register_frame.
* ia64-hpux-tdep.c: Include "target.h" and "frame.h".
(IA64_HPUX_UREG_REASON): New macro.
(ia64_hpux_stopped_in_syscall, ia64_hpux_size_of_register_frame):
New functions.
(ia64_hpux_init_abi): Set tdep->size_of_register_frame.
* ia64-hpux-nat.c (ia64_hpux_xfer_uregs): New function.
(ia64_hpux_xfer_partial): Add handling of TARGET_OBJECT_HPUX_UREGS
objects.
When attaching to a process, the ttrace interface was creating a ptid
with a null LWP, because it did not have it yet. This LWP was then
set as soon as we received our first event from our inferior, during
our first wait. Similarly, the allocation of the thread private info
was also defered.
This works on PA/HP-UX, because we immediately perform a wait to pop
the event triggered by the attach. We can use that event to extract
the thread's LWP. But this does not work for IA64/HP-UX, because
the attach no longer triggers an event, and thus a wait should NOT
be performed (such a wait would simply block indefinitely).
It is actually possible, however, to determine the thread's LWP.
This change therefore adjusts the attach code to create a thread with
the correct LWP set, as well as with its private info allocated.
Same thing for all the other threads.
gdb/ChangeLog:
[ttrace] Compute thread list immediately after attach.
* inf_ttrace_attach (inf_ttrace_create_threads_after_attach):
New subprogram.
(inf_ttrace_attach): Use it.
This is something that I am seeing on ia64-hpux while trying to
backtrace from a thread that's doing a wait:
(gdb) task 2
[Switching to task 2]
0x9fffffffef52f590 in __ksleep () from /[...]/libc.so.1
(gdb) bt
#0 0x9fffffffef52f590 in __ksleep () from /[...]/libc.so.1
#1 0x9fffffffef73c870 in __sleep_1x1 () from /[...]/libpthread.so.1
#2 0x9fffffffef738fe0 in __mxn_sleep () from /[...]/libpthread.so.1
#3 0x9fffffffef675e90 in ?? () from /[...]/libpthread.so.1
The backtrace is incomplete and stops at frame #3, but there are in fact
a few more frames.
The reason why we stopped the backtrace is related to the fact that
we were not able to determine the start address of the function
corresponding to the frame PC. This is visible at the user level
thanks to the "??" that GDB displayed for frame 3.
We have the following code in libunwind-frame.c:libunwind_frame_cache
which explicitly returns a NULL cache when we couldn't determine the
frame's function address, immediately triggering an end-of-stack
frame_id, thus terminating the backtrace:
/* We can assume we are unwinding a normal frame. Even if this is
for a signal trampoline, ia64 signal "trampolines" use a normal
subroutine call to start the signal handler. */
cache->func_addr = get_frame_func (this_frame);
if (cache->func_addr == 0
&& get_next_frame (this_frame)
&& get_frame_type (get_next_frame (this_frame)) == NORMAL_FRAME)
return NULL;
As explained in the comment, I think we can still go on, and use
the unwind record to do the debugging. This change imlements this
change, and allows us to get the full backtrace.
gdb/ChangeLog:
* libunwind-frame.c (libunwind_frame_cache): Do not return NULL
if we could not determine the frame's function address. Instead,
use the frame's PC, and then continue.
This patch fixes a small problem on ia64-hpux when calling functions
whose parameter are small integral values (less than 8 bytes). In
that case, the parameter value was stored on the wrong side of the
register. Same problem for return values.
With this patch, the results for gdb.base/callfuncs.exp improve from
# of expected passes 41
# of unexpected failures 78
To:
# of expected passes 95
# of unexpected failures 24
gdb/ChangeLog:
* ia64-tdep.c (ia64_struct_type_p): New function.
(ia64_extract_return_value): Handle integral values that are
less than 8 bytes long.
(ia64_push_dummy_call): Likewise.
ia64-tdep.c defines a floatformats_ia64_ext that should contain
both the little-endian and the big-endian version of the float
format used in the ia64 registers (an 82bit float format).
Right now, both entries point to the same little-endian definition.
A big-endian definition is now necessary for the ia64-hpux port.
gdb/ChangeLog:
* ia64-tdep.c (floatformat_ia64_ext_little): Renames
floatformat_ia64_ext.
(floatformat_ia64_ext_big): New static const.
(floatformats_ia64_ext): Set first entry to &floatformat_ia64_ext_big.
PR fortran/11104 and DWARF unbound arrays detection.
* dwarf2read.c (read_subrange_type): Set zero length on unspecified
upper bound. Set TYPE_HIGH_BOUND_UNDEFINED if not language_ada on
unspecified upper bound.
* eval.c (evaluate_subexp_standard) <multi_f77_subscript>: Remove
variables array_size_array, tmp_type and offset_item. New variable
array. Remove call to f77_get_upperbound. New variables array_type
and index. Call value_subscripted_rvalue for each dimenasion. Remove
the final call to deprecated_set_value_type.
gdb/testsuite/
PR fortran/11104 and DWARF unbound arrays detection.
* gdb.fortran/multi-dim.exp: New file.
* gdb.fortran/multi-dim.f90: New file.
Make value allocations more lazy.
* ada-lang.c (coerce_unspec_val_to_type): Use allocate_value_lazy
instead of allocate_value and set_value_lazy when possible.
* dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Use allocate_value_lazy
instead of allocate_value and set_value_lazy.
* findvar.c (value_of_register_lazy): Likewise.
(read_var_value): Remove V preallocation, call just check_typedef in
advance. Move allocate_value to LOC_CONST, LOC_LABEL,
LOC_CONST_BYTES. Use allocate_value_lazy in LOC_STATIC, LOC_ARG,
LOC_REF_ARG, LOC_LOCAL, LOC_BLOCK. Set ADDR instead of
set_value_address and break in LOC_BLOCK. Use allocate_value_lazy and
remove lval_memory set in LOC_REGPARM_ADDR. Use allocate_value_lazy
in LOC_UNRESOLVED and LOC_OPTIMIZED_OUT. Add setting lval_memory at
the end, remove set_value_lazy there.
* valarith.c (value_subscripted_rvalue): Use allocate_value_lazy
instead of allocate_value and set_value_lazy when possible.
* valops.c (value_fetch_lazy): Do nop for value_optimized_out VAL.
* value.c (allocate_computed_value): Use allocate_value_lazy instead
of allocate_value and set_value_lazy.
(value_from_contents_and_address): Use allocate_value_lazy instead of
allocate_value and set_value_lazy when possible.
gdb/
* disasm.c (dump_insns): Support dumping opcodes for MI.
* mi/mi-cmd-disas.c (mi_cmd_disassemble): Allow mode to control
dumping of instruction opcodes.
gdb/doc/
* gdb.texinfo (GDB/MI Data Manipulation): Update to reflect
changes in mi/mi-cmd-disas.c
gdb/testsuite/
* gdb.mi/mi-disassemble.exp, gdb.mi/mi2-disassemble.exp: Update
expected output to reflect changes in gdb/mi/mi-cmd-disas.c and
add new tests for opcode dumping.
Thiago Jung Bauermann <bauerman@br.ibm.com>
Implement support for PowerPC BookE ranged watchpoints.
gdb/
* breakpoint.h
(struct breakpoint_ops) <resources_needed>: New method.
Initialize to NULL in all existing breakpoint_ops instances.
(struct breakpoint) <exact>: New field.
(target_exact_watchpoints): Declare external global.
* breakpoint.c (target_exact_watchpoints): New global flag.
(update_watchpoint): Set b->type to bp_hardware_watchpoint and
b->enable_state to bp_enabled before calling
hw_watchpoint_used_count.
(hw_watchpoint_used_count): Iterate over all bp_locations in a
watchpoint. Call breakpoint's breakpoint_ops.resources_needed
if available.
(insert_watchpoint, remove_watchpoint): Use fixed length of 1 byte
if the watchpoint is exact.
(resources_needed_watchpoint): New function.
(watchpoint_breakpoint_ops): Add resources_needed_watchpoint.
(watch_command_1): Set b->exact if the user asked for an exact
watchpoint and one can be set.
(can_use_hardware_watchpoint): Add exact_watchpoints argument.
Pass fixed length of 1 to target_region_ok_for_hw_watchpoint if
the user asks for an exact watchpoint and one can be set. Return
number of needed debug registers to watch the expression.
* gdbtypes.c (is_scalar_type): New function, based on
valprint.c:scalar_type_p.
(is_scalar_type_recursive): New function.
* gdbtypes.h (is_scalar_type_recursive): Declare.
* ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Always
handle regions when ranged watchpoints are available.
(create_watchpoint_request): New function.
(ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint): Use
create_watchpoint_request.
* rs6000-tdep.c (show_powerpc_exact_watchpoints): New function.
(_initialize_rs6000_tdep): Add `exact-watchpoints' boolean to the
`set powerpc' and `show powerpc' commands.
* target.h (struct target_ops) <to_region_ok_for_hw_watchpoint>:
Mention documentation comment in the target macro.
(target_region_ok_for_hw_watchpoint): Document return value.
gdb/doc/
* gdb.texinfo (PowerPC Embedded): Document ranged watchpoints and
the "set powerpc exact-watchpoints" flag.
Convert hardware watchpoints to use breakpoint_ops.
gdb/
* breakpoint.h (breakpoint_ops) <insert>: Rename to...
<insert_location>: ... this. Return int instead of void.
Accept pointer to struct bp_location instead of pointer to
struct breakpoint. Adapt all implementations.
(breakpoint_ops) <remove>: Rename to...
<remove_location>: ... this. Accept pointer to struct bp_location
instead of pointer to struct breakpoint. Adapt all implementations.
* breakpoint.c (insert_catchpoint): Delete function.
(insert_bp_location): Call the watchpoint or catchpoint's
breakpoint_ops.insert method.
(remove_breakpoint_1): Call the watchpoint or catchpoint's
breakpoint_ops.remove method.
(insert_watchpoint, remove_watchpoint): New functions.
(watchpoint_breakpoint_ops): New structure.
(watch_command_1): Initialize the OPS field.
* inf-child.c (inf_child_insert_fork_catchpoint)
(inf_child_remove_fork_catchpoint, inf_child_insert_vfork_catchpoint)
(inf_child_remove_vfork_catchpoint, inf_child_insert_exec_catchpoint)
(inf_child_remove_exec_catchpoint, inf_child_set_syscall_catchpoint):
Delete functions.
(inf_child_target): Remove initialization of to_insert_fork_catchpoint,
to_remove_fork_catchpoint, to_insert_vfork_catchpoint,
to_remove_vfork_catchpoint, to_insert_exec_catchpoint,
to_remove_exec_catchpoint and to_set_syscall_catchpoint.
* target.c (update_current_target): Change default implementation of
to_insert_fork_catchpoint, to_remove_fork_catchpoint,
to_insert_vfork_catchpoint, to_remove_vfork_catchpoint,
to_insert_exec_catchpoint, to_remove_exec_catchpoint and
to_set_syscall_catchpoint to return_one.
(debug_to_insert_fork_catchpoint, debug_to_insert_vfork_catchpoint)
(debug_to_insert_exec_catchpoint): Report return value.
* target.h (to_insert_fork_catchpoint, to_insert_vfork_catchpoint)
(to_insert_exec_catchpoint): Change declaration to return int instead
of void.
gdb/testsuite/
* gdb.base/foll-exec.exp: Adapt to new error string when the catchpoint
type is not supported.
* gdb.base/foll-fork.exp: Likewise.
* gdb.base/foll-vfork.exp: Likewise.
gdb/ChangeLog
* remote-sim.c (gdbsim_store_register): Update API to
sim_store_register to check more error conditions.
include/gdb/ChangeLog
* remote-sim.h (sim_store_register): Update the API
documentation for this function.
sim/erc32/ChangeLog
sim/h8300/ChangeLog
sim/m32c/ChangeLog
sim/mn10300/ChangeLog
sim/ppc/ChangeLog
sim/rx/ChangeLog
sim/v850/ChangeLog
* ???.c (sim_store_register): Update return value to
match new API.
Looks like we've long been using "AO" instead of "A0" in the enum for the
A0.W. But no one noticed since we aren't using it directly (we assume the
position in the reverse). I've committed this simple fix.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* mi/mi-cmd-disas.c (mi_cmd_disassemble): Mark up error message
for i18n.
* tui/tui-layout.c (tui_set_layout_for_display_command):
Split line so that operator goes to beginning of line.
* tui/tui-winsource.c (tui_horizontal_source_scroll): Move
assignment out of if statement.
This signal does not indicate an error condition, so the default
behavior when receiving this signal should be to resume execution
silently.
gdb/ChangeLog:
Do not stop on SIGPRIO signals by default
* infrun.c (_initialize_infrun): Unset signal_stop and
signal_print for TARGET_SIGNAL_PRIO.
This command does not work when testing with GDBserver. So this patch
changes the few tests that do not specifically test the `start' command,
and replace calls to gdb_start_cmd with the usual `run LOC' approach.
For the couple of testcases that do really test the `start' command,
do an early return as UNTESTED instead of running this testcase.
gdb/testsuite/ChangeLog:
Add marker to be used as anchor for inserting breakpoints.
* gdb.ada/null_record/null_record.adb: Add "-- START" comment.
* gdb.ada/start/dummy.adb, gdb.ada/uninitialized_vars/parse.adb:
Likewise.
Remove uses of gdb_start_cmd.
* gdb.ada/null_record.exp: Remove use of gdb_start_cmd.
* gdb.ada/print_pc.exp, gdb.ada/uninitialized_vars.exp: Ditto.
Do not run testcase if testing with GDBserver.
* gdb.ada/exec_changed.exp, gdb.ada/start.exp: Abort as untested
if testing with GDBserver.
This file has been created prior to CVS rev 1. Instead of listing all
the years since 1999, I just put 1999, 2010 and 2011.
gdb/testsuite/ChangeLog:
* gdb.base/langs1.f: Add copyright header.
* frame.c (get_prev_frame_1) <UNWIND_INNER_ID>: New variables
this_pc_in_block, morestack_msym and morestack_name. Check for
"__morestack" minimal symbol there.
gdb/testsuite/
* gdb.base/morestack.exp: New file.
* gdb.base/morestack.c: New file.
This makes sure that the `load' command does not repeat when the user
presses Return again, as documented in the GDB User's Manual.
gdb/ChangeLog:
* symfile.c (find_sym_fns): Add call to dont_repeat.
gdb/ChangeLog:
* top.c (print_gdb_version): Update copyright year in version output.
gdb/gdbserverChangeLog:
* server.c (gdbserver_version): Update copyright year in version
output.
* gdbreplay.c (gdbreplay_version): Ditto.
gdb/ChangeLog:
* ChangeLog-2010: Renames ChangeLog.
* ChangeLog: New file.
* config/djgpp/fnchange.lst: Add exception for gdb/ChangeLog-2010.
Also fix a typo in the exception for gdb/ChangeLog-2009.
Initial support for Blackfin processors. This supports the standard ABI.
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Trying to print a variable defined as an access to an unconstrained
array:
type String_Access is access String;
S1 : String_Access;
If that variable is null, then GDB prints its value in an odd way:
(gdb) print S1
$1 = (string_bug.string_access) (null)
^^^^^^
This patch changes the debugger behavior to print the pointer using
the same output we'd use for any null pointer:
(gdb) print S1
$1 = (string_bug.string_access) 0x0
It also adds an assert, helping us verify an assumption.
gdb/ChangeLog:
* ada-valprint.c (ada_val_print_1): Print null array pointers as
`0x0' rather than `(null)'. Add assertion.
gdb/testsuite/ChangeLog:
* gdb.ada/arrayptr/foo.adb: Add new local variable Null_String.
* gdb.ada/arrayptr.exp: Add test printing that new variable.
This patch enhances the debugger to distinguish between fat pointers
that represent either: array types, or array access types. In the latter
case, the object/type is encoded as a typedef type pointing to the fat
pointer.
The first part of the change is to adjust ada_check_typedef to avoid
stripping the typedef layer when it points to a fat pointer. The rest
of the patch is adjustments required in various places to deal with
the fact that the type is uses might now be a typedef.
gdb/ChangeLog:
* ada-lang.h (ada_coerce_to_simple_array): Add declaration.
* ada-lang.c (ada_typedef_target_type): New function.
(desc_base_type): Add handling of fat pointer typedefs.
(ada_coerce_to_simple_array): Make non-static.
(decode_packed_array_bitsize): Add handling of fat pointer typedefs.
Add assertion.
(ada_template_to_fixed_record_type_1, ada_to_fixed_type)
(ada_check_typedef): Add handling of fat pointer typedefs.
(ada_evaluate_subexp) [OP_FUNCALL]: Likewise.
* ada-typeprint.c (ada_print_type): Add handling of fat pointer
typedefs.
* ada-valprint.c (ada_val_print_1): Convert fat pointers that are not
array accesses to simple arrays rather than simple array pointers.
(ada_value_print): In the case of array descriptors, do not print
the value type description unless it is an array access.
gdb/testsuite/ChangeLog:
* gdb.ada/lang_switch.exp: Correct expected parameter value.
gdb/doc/ChangeLog:
* gdb.texinfo (Ada Glitches): Remove paragraph describing the
occasional case where the debugger prints an array address
instead of the array itself.
This target_ops routine appears to be unused in practice, so this patch
removes it.
gdb/ChangeLog:
* inf-child.c (inf_child_acknowledge_created_inferior): Delete.
(inf_child_target): Do not set t->to_acknowledge_created_inferior.
* inf-ptrace.c (inf_ptrace_create_inferior): Remove call to
target_acknowledge_created_inferior.
* inf-ttrace.c (inf_ttrace_him): Likewise.
* target.h (struct target_ops): Delete to_acknowledge_created_inferior
field.
(target_acknowledge_created_inferior): Delete.
* target.c (update_current_target): Remove setting of
to_acknowledge_created_inferior field. Do default value for that
field either.
(debug_to_acknowledge_created_inferior): Delete.
(setup_target_debug): Remove setting of
current_target.to_acknowledge_created_inferior.
* breakpoint.c (breakpoint_restore_shadows): When looking for the
location with the lowest address that overlaps the memory range we
want to restore shadows for, account for multiple locations at the
same address.
(mips_elf_make_msymbol_special): Don't set the low bit in the
symbol's address.
(mips_read_pc, mips_unwind_pc, mips_addr_bits_remove): Strip bit
indicating mips16 address, if present.
(mips_write_pc): Set bit indicating mips16 address when in a mips16
function.
(mips_eabi_push_dummy_call, mips_o64_push_dummy_call): Likewise,
but for each function pointer argument to inferior function call.
(mips_convert_register_gpreg_case_p): New functions.
(mips_convert_register_p): Invoke new functions above.
(mips_register_to_value): Add case for fetching value shorter
than 64 bits from a 64-bit register.
(mips_value_to_register): Add case for storing value shorter
than 64 bits into a 64-bit register.
cooked values that are being transferred to 64-bit raw registers.
(mips_pseudo_register_read): Revise to preserve symmetry with
mips_pseudo_register_write().
* valops.c (value_one): Use get_array_bounds to compute the number
of array elements instead of dividing the length of the array by the
length of the element types.
* valarith.c (value_complement, value_neg): Likewise.
This is a nasty interaction between Python and GDB. Basically,
Python causes some macros to be unilaterally defined in order
to turns some features on:
/* Define to activate features from IEEE Stds 1003.1-2001 */
#define _POSIX_C_SOURCE 200112L
/* Define to the level of X/Open that your system supports */
#define _XOPEN_SOURCE 600
But the problem is that they turn off defines provided by some
system headers on which we depend. Namely:
* sys/siginfo.h:
#if _SGIAPI
#define siginfo __siginfo
#endif
* sys/ucontext.h:
#if _SGIAPI && !defined(__SGI_NOUCONTEXT_COMPAT)
[...]
#define fp_r __fp_r
[...]
#define fp_csr __fp_csr
[...]
#endif
The important macro here is _SGIAPI, defined as follow in standards.h:
#define _SGIAPI ((defined(_SGI_SOURCE) && \
_NO_POSIX && _NO_XOPEN4 && _NO_XOPEN5) || \
(_ANSIMODE && _NO_POSIX && _NO_XOPEN4 && _NO_XOPEN5))
If one builds GDB without Python, then _SGIAPI is true, and all is fine.
But building with Python causes both _POSIX_C_SOURCE and _XOPEN_SOURCE
to trip all the _NO_[...] tests (_NO_POSIX, _NO_XOPEN4, _NO_XOPEN5).
And so we get build failures because we try to use undefined types, or
non-existent component names inside the regset structure.
The latter problem is observed only within irix5-nat.c, which means
that it is specific to IRIX. So it's easy to write the code in a way
that it does not require the macros (just use the real component names,
rather than relying on the macros to do the translation).
The former, on the other hand, is a little trickier, because the problem
occurs inside a generic unit (procfs.c). The solution I chose was to
adjust the configure script to add -Dsiginfo=__siginfo to the CPPFLAGS
if building with python using GCC on IRIX.
We hadn't seen this sort of issue up to now because the affect units
have not been dependent on the python includes up to now. Recent changes
have made them indirectly dependent on Python, thus triggering the issues.
gdb/ChangeLog:
* irix5-nat.c: Replace fp_r, fp_regs and fp_scr by __fp_r, __fp_regs
and __fp_scr respectively throughout.
* configure.ac: Compile with -Dsiginfo=__siginfo if building with
Python using GCC on IRIX.
* configure: Regenerate.
(dwarf2_per_cu_quick_data): Move definition down to "quick functions"
section. Delete members lines full_names. Rename read_lines to
no_file_data.
(quick_file_names): New struct.
(hash_file_name_entry, eq_file_name_entry): New functions.
(delete_file_name_entry, create_quick_file_names_table): New functions.
(dwarf2_read_index): Initialize quick_file_names_table.
(dw2_get_file_names): Renamed from dw2_require_line_header.
Return pointer to quick_file_names entry. All callers updated.
(dw2_get_real_path): Renamed from dw2_require_full_path.
Replace per_cu arg with pointer to quick_file_names entry.
All callers updated.
(dw2_free_cached_file_names): New function.
(dw2_forget_cached_source_info): Call it (via htab_traverse_noresize).
(dwarf2_initialize_objfile): Initialize quick_file_names_table in
the OBJF_READNOW case.
(dwarf2_free_objfile): Rewrite freeing of quick file names tables.
* dwarf2read.c (struct psymtab_cu_index_map): New struct.
(hash_psymtab_cu_index, eq_psymtab_cu_index): New functions.
(struct addrmap_index_data): New struct.
(add_address_entry): Remove arg `pst', new args `start', `end'.
(add_address_entry_worker, write_address_map): New functions.
(write_psymtabs_to_index): Address table generation moved to
write_address_map. Build a table mapping psymtab to CU index
to pass to it.
C++ class type is returned, fix incorrect enclosing type / embedded
offset. If internal variable is returned, allocate new internalvar
value using value_of_internalvar.
* NEWS: Document changes in behavior of "print x = 0" and similar
expressions.
gdbadmin
Kevin Buettner
Tom Tromey
Thiago Jung Bauermann
Pedro Alves
Jan Kratochvil
Ken Werner
Joel Brobecker
Yao Qi
Pierre Muller
Mike Frysinger
Andrew Burgess
Michael Snyder
Phil Muldoon
Andreas Schwab
Paul Pluzhnikov
Hui Zhu
Marc Khouzam
Doug Evans
H.J. Lu
Stan Shebs
Mark Kettenis
Masaki Muranaka
Keith Seitz
Ulrich Weigand