This replaces a VEC in serial.c with a std::vector.
Tested by the buildbot.
gdb/ChangeLog
2018-06-09 Tom Tromey <tom@tromey.com>
* serial.c (serial_ops_p): Remove typedef. Don't declare VEC.
(serial_ops_list): Now static, std::vector.
(serial_interface_lookup, serial_add_interface): Update.
This removes a VEC from dwarf2read.c, replacing it with a std::vector.
Tested by the buildbot.
gdb/ChangeLog
2018-06-09 Tom Tromey <tom@tromey.com>
* dwarf2read.c (process_cu_includes): Update.
(process_full_comp_unit): Update.
* dwarf2read.h (struct dwarf2_per_objfile) <just_read_cus>: Now a
std::vector.
Adapt the existing regular MIPS lazy binding stub tests for microMIPS
code verification. Check both regular and `--insn32' variants.
Correct indentation issues in the conditional updated.
ld/
* testsuite/ld-mips-elf/stub-dynsym-micromips-1-7fff.d: New
test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-1-8000.d: New
test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-1-fff0.d: New
test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-1-10000.d: New
test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-1-2fe80.d: New
test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-insn32-1-7fff.d:
New test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-insn32-1-8000.d:
New test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-insn32-1-fff0.d:
New test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-insn32-1-10000.d:
New test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-insn32-1-2fe80.d:
New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests. Fix
indentation.
As from commit 2ebd05b80b ("MIPS/LD: Correct `mips-*-windiss' target
emulation configuration") we have:
EXTRA_EM_FILE=mipself
in `emulparams/elf32mipswindiss.sh', however no corresponding Makefile
`mipself.em' dependency for `eelf32mipswindiss.c'. Add it.
ld/
* Makefile.am (eelf32mipswindiss.c): Add `mipself.em' dependency.
* Makefile.in: Regenerate.
This makes gdbreplay share a bit more code with gdbserver, and paves
the way to share more in future. Including common-defs.h pulls in
defines and headers that gdb and gdbserver assume are always
defined/available too, such as for example _(), ansidecl.h or a set of
system headers. Including that revealed (static vs extern conflict)
gdbreplay had a local copy of perror_with_name (which exited directly
instead of throwing an error). So I removed gdbreplay's local copy,
and then added enough .o files until gdbreplay linked successfully.
Also, use xstrdup instead of strdup.
gdb/gdbserver/ChangeLog:
2018-06-08 Pedro Alves <palves@redhat.com>
* Makefile.in (GDBREPLAY_OBS): Add common/cleanups.o,
common/common-exceptions.o, common/common-utils.o,
common/errors.o, common/print-utils.o and utils.o.
* gdbreplay.c: Include "common-defs.h" instead of the two
'config.h's here. Don't include stdio.h, errno.h, stdlib.h,
string.h or alloca.h.
(perror_with_name): Delete.
(remote_open): Use xstrdup instead of strdup.
(main): Rename to ...
(captured_main): ... this.
(main): New.
There is no need to put hidden _edata, __bss_start, and _end in dynamic
symbol table in shared libraries.
bfd/
PR ld/23161
* elfxx-x86.c (elf_x86_hide_linker_defined): New function.
(_bfd_x86_elf_link_check_relocs): Use it to hide hidden
__bss_start, _end and _edata in shared libraries.
ld/
PR ld/23161
* testsuite/ld-elf/pr23161d.rd: Remove local _edata, __bss_start,
and _end from dynamic symbol table.
Originally reported in
https://bugzilla.redhat.com/show_bug.cgi?id=1577396 -- gdb build fails
with Python 3.7 due to references to a Python internal function whose
declaration changed in 3.7.
gdb/ChangeLog
2018-06-08 Paul Koning <paul_koning@dell.com>
PR gdb/23252
* python/python.c (do_start_initialization):
Avoid call to internal Python API.
(init__gdb_module): New function.
This commit adds two new commands which may be used to test thread
debugging libraries used by GDB:
* "maint check libthread-db" tests the thread debugging library GDB
is using for the current inferior.
* "maint set/show check-libthread-db" selects whether libthread_db
tests should be run automatically as libthread_db is auto-loaded.
The default is to not run tests automatically.
The test itself is a basic integrity check exercising all libthread_db
functions used by GDB on GNU/Linux systems. By extension this also
exercises the proc_service functions provided by GDB that libthread_db
uses.
This functionality is useful for NPTL developers and libthread_db
developers. It could also prove useful investigating bugs reported
against GDB where the thread debugging library or GDB's proc_service
layer is suspect.
gdb/ChangeLog:
* linux-thread-db.c (valprint.h): New include.
(struct check_thread_db_info): New structure.
(check_thread_db_on_load, tdb_testinfo): New static globals.
(check_thread_db, check_thread_db_callback): New functions.
(try_thread_db_load_1): Run integrity checks if requested.
(maintenance_check_libthread_db): New function.
(_initialize_thread_db): Register "maint check libthread-db"
and "maint set/show check-libthread-db".
* NEWS: Mention the above new commands.
gdb/doc/ChangeLog:
* gdb.texinfo (Maintenance Commands): Document "maint check
libthread-db" and "maint set/show check-libthread-db".
gdb/testsuite/ChangeLog:
* gdb.threads/check-libthread-db.exp: New file.
* gdb.threads/check-libthread-db.c: Likewise.
I noticed that the mingw build was failing in the buildbot. This
patch fixes the problem. I'm checking it in as obvious.
gdb/ChangeLog
2018-06-08 Tom Tromey <tom@tromey.com>
* windows-nat.c (windows_nat_target::xfer_partial): "beneath" is
now a method.
This patch adds support to gas for -mcpu=cortex-a76 in the usual way.
make check-gas passes without problems.
2018-06-08 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
* config/tc-arm.c (arm_cpus): Add Cortex-A76 entry.
* doc/c-arm.texi (-mcpu): Document cortex-a76.
This patch adds support to gas for -mcpu=cortex-a76 in the usual way.
make check-gas passes without problems.
2018-06-08 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
* config/tc-aarch64.c (aarch64_cpus): Add Cortex-A76 entry.
* doc/c-aarch64.texi (-mcpu): Document cortex-a76.
This removes the last cleanup from btrace.c, replacing it with a use
of unique_xmalloc_ptr.
gdb/ChangeLog
2018-06-08 Tom Tromey <tom@tromey.com>
* btrace.c (parse_xml_raw): Use gdb::unique_xmalloc_ptr.
Detect illegal FMOV instructions that changes the size from 32 bits to 64
bits and vice versa. Add tests for these and other undefined FMOV
instructions.
PR 20319
gas * testsuite/gas/aarch64/illegal-3.s: Test if unallocated FMOV encodings
are detected as undefined.
* testsuite/gas/aarch64/illegal-3.d: Likewise.
* testsuite/gas/aarch64/illegal.s: Test if FMOV instructions that are
changing the size from 32 bits to 64 bits and vice versa trigger an
error.
* testsuite/gas/aarch64/illegal.l: Likewise.
opcodes * aarch64-tbl.h: Introduce QL_INT2FP_FMOV and QL_FP2INT_FMOV.
(aarch64_opcode_table) : Use QL_INT2FP_FMOV and QL_FP2INT_FMOV.
I forgot to add a ChangeLog entry for my previous commit:
commit e5a77256e8
Author: Sergio Durigan Junior <sergiodj@redhat.com>
Date: Tue Jun 5 17:55:39 2018 -0400
Guard declarations of 'sve_{vq,vl}_from_{vl,vq}' macros on Aarch64 (and unbreak build)
This commit fixes that.
Currently, the target stack is represented by a singly linked list,
with target_ops having a pointer to the target beneath. This poses a
problem for multi-process / multi-target debugging. In that case, we
will naturally want multiple instances of target stacks. E.g., one
stack for inferior 1 which is debugging a core file, and another
target stack for inferior 2 which is debugging a remote process. The
problem then is in finding a target's "beneath" target, if we consider
that for some target_ops types, we'll be sharing a single target_ops
instance between several inferiors. For example, so far, I found no
need to have multiple instances of the spu_multiarch_target /
exec_target / dummy_target targets.
Thus this patch, which changes the target stack representation to an
array of pointers. For now, there's still a single global instance of
this new target_stack class, though further down in the multi-target
work, each inferior will have its own instance.
gdb/ChangeLog:
2018-06-07 Pedro Alves <palves@redhat.com>
* target.h (target_ops) <beneath>: Now a method. All references
updated.
(class target_stack): New.
* target.c (g_target_stack): New.
(g_current_top_target): Delete.
(current_top_target): Get the top target out of g_target_stack.
(target_stack::push, target_stack::unpush): New.
(push_target, unpush_target): Reimplement.
(target_is_pushed): Reimplement in terms of g_target_stack.
(target_ops::beneath, target_stack::find_beneath): New.
This changes target_ops::beneath from a pointer to a method, and
adjusts all references throughout. The idea here is to make it easier
to change the target stack representation from an intrusive singly
linked list to something else without leaking implementation details
throughout.
The commit does not change the representation yet, that will be done
in a following patch. That is why a new target_ops::m_beneath field
appears here. That new field isn't really documented properly or made
private, simply because it will be removed shortly.
Note that target_ops::beneath() is essentially the same as the current
find_target_beneath routine. The following patch will eliminate the
latter.
gdb/ChangeLog:
2018-06-07 Pedro Alves <palves@redhat.com>
* target.h (target_ops) <beneath>: Now a method. All references
updated.
(target_ops) <m_beneath>: New.
* target.c (target_ops::beneath): New.
* corelow.c: Adjust all references to target_ops::beneath.
* linux-thread-db.c: Likewise.
* make-target-delegates: Likewise.
* record-btrace.c: Likewise.
* record-full.c: Likewise.
* remote.c: Likewise.
* target.c: Likewise.
* target-delegates.c: Regenerate.
The recent C++ification of target_ops replaced references to the old
"current_target" squashed target throughout with references to a
"target_stack" pointer. I had picked the "target_stack" name very
early in the multi-target work, and managed to stick with it, even
though it's a bit of a misnomer, since it isn't really a "target
stack" object, but a pointer into the current top target in the stack.
As I'm splitting more pieces off of the multi-target branch, I've come
to think that it's better to rename it now. A following patch will
introduce a new class to represent a target stack, and "target_stack"
would be _its_ ideal name. (In the branch, the class is called
a_target_stack to work around the clash.)
Thus this commit renames target_stack to current_top_target and
replaces all references throughout. Also, while at it,
current_top_target is made a function instead of a pointer, to make it
possible to change its internal implementation without leaking
implementation details out. In a couple patches, the implementation
of the function will change to refer to a target stack object, and
then further down the multi-target work, it'll change again to find
the right target stack for the current inferior.
gdb/ChangeLog:
2018-06-07 Pedro Alves <palves@redhat.com>
* target.h (target_stack): Delete.
(current_top_target): Declare function.
* target.c (target_stack): Delete.
(g_current_top_target): New.
(current_top_target): New function.
* auxv.c: Use current_top_target instead of target_stack
throughout.
* avr-tdep.c: Likewise.
* breakpoint.c: Likewise.
* corefile.c: Likewise.
* elfread.c: Likewise.
* eval.c: Likewise.
* exceptions.c: Likewise.
* frame.c: Likewise.
* gdbarch-selftests.c: Likewise.
* gnu-v3-abi.c: Likewise.
* ia64-tdep.c: Likewise.
* ia64-vms-tdep.c: Likewise.
* infcall.c: Likewise.
* infcmd.c: Likewise.
* infrun.c: Likewise.
* linespec.c: Likewise.
* linux-tdep.c: Likewise.
* minsyms.c: Likewise.
* ppc-linux-nat.c: Likewise.
* ppc-linux-tdep.c: Likewise.
* procfs.c: Likewise.
* regcache.c: Likewise.
* remote.c: Likewise.
* rs6000-tdep.c: Likewise.
* s390-linux-nat.c: Likewise.
* s390-tdep.c: Likewise.
* solib-aix.c: Likewise.
* solib-darwin.c: Likewise.
* solib-dsbt.c: Likewise.
* solib-spu.c: Likewise.
* solib-svr4.c: Likewise.
* solib-target.c: Likewise.
* sparc-tdep.c: Likewise.
* sparc64-tdep.c: Likewise.
* spu-tdep.c: Likewise.
* symfile.c: Likewise.
* symtab.c: Likewise.
* target-descriptions.c: Likewise.
* target-memory.c: Likewise.
* target.c: Likewise.
* target.h: Likewise.
* tracefile-tfile.c: Likewise.
* tracepoint.c: Likewise.
* valops.c: Likewise.
* valprint.c: Likewise.
* value.c: Likewise.
* windows-tdep.c: Likewise.
* mi/mi-main.c: Likewise.
This changes two out parameters of build_address_symbolic to be
std::string, and updates the callers. This allows removing some
cleanups.
This patch also moves the declaration of build_address_symbolic out of
defs.h. I think that many things in defs.h should be elsewhere
instead. In this case, I moved the declaration to valprint.h, becuase
there is no "printcmd.h" -- but perhaps it would be better to
introduce that instead.
Tested by the buildbot.
gdb/ChangeLog
2018-06-07 Tom Tromey <tom@tromey.com>
* valprint.h (build_address_symbolic): Declare.
* printcmd.c (print_address_symbolic): Update.
(build_address_symbolic): Change "name" and "filename" to
std::string.
* disasm.c (gdb_pretty_print_disassembler::pretty_print_insn):
Update.
* defs.h (build_address_symbolic): Remove declaration.
This patch fixes an uninitialized memory issue that can under certain
circumstances turn an error into a warning because non_fatal was not initialised
in all cases.
Verified using valgrind.
gas/config/tc-aarch64.c
PR binutils/21446
* tc-aarch64.c (record_operand_error, record_operand_error_with_data):
Initialize non_fatal.
Add the functionality for reading/writing pseudo registers.
On SVE the V registers are pseudo registers. This is supported
by adding AARCH64_SVE_V0_REGNUM.
* aarch64-tdep.c (AARCH64_SVE_V0_REGNUM): Add define.
(aarch64_vnv_type): Add function.
(aarch64_pseudo_register_name): Add V regs for SVE.
(aarch64_pseudo_register_type): Likewise.
(aarch64_pseudo_register_reggroup_p): Likewise.
(aarch64_pseudo_read_value_2): Use V0 offset for SVE
(aarch64_pseudo_read_value): Add V regs for SVE.
(aarch64_pseudo_write_2): Use V0 offset for SVE
(aarch64_pseudo_write): Add V regs for SVE.
* aarch64-tdep.h (struct gdbarch_tdep): Add vnv_type.
EXECUTABLE_SYMBOLS is supposed to be true to its name, only defining
symbols for the executable.
* emulparams/elf64bmip.sh (EXECUTABLE_SYMBOLS): Don't define.
(OTHER_SYMBOLS): Define this instead.
* emulparams/elf32bmipn32.sh (EXECUTABLE_SYMBOLS): Don't define.
(OTHER_SYMBOLS): Define similarly to elf64bmip.sh.
* emulparams/elf64hppa.sh (EXECUTABLE_SYMBOLS): Don't define.
(OTHER_SYMBOLS): Define instead.
Adding an undefined __c6xabi_DSBT_BASE via an EXTERN in the linker
script isn't ideal, as the symbol is not always needed. This patch
adds the undefined symbol on encountering relocations where it is
implicitly referenced.
bfd/
* elf32-tic6x.c (elf32_tic6x_check_relocs): Reference
__c6xabi_DSBT_BASE explicitly for R_C6000_SBR_* relocs.
ld/
* emulparams/elf32_tic6x_le.sh (EXECUTABLE_SYMBOLS): Don't define.
Commit 122394f147 ("Function for reading
the Aarch64 SVE vector length") has added macros to manipulate SVE
vector sizes based on Linux kernel sources, but did not guard them
with #ifndef's, which breaks the build when the system headers already
have these macros:
CXX aarch64-linux-nat.o
In file included from ../../gdb/aarch64-tdep.h:25,
from ../../gdb/aarch64-linux-nat.c:30:
../../gdb/arch/aarch64.h:79: error: "sve_vq_from_vl" redefined [-Werror]
#define sve_vq_from_vl(vl) ((vl) / 0x10)
In file included from /usr/include/bits/sigcontext.h:30,
from /usr/include/signal.h:291,
from build-gnulib/import/signal.h:52,
from ../../gdb/linux-nat.h:23,
from ../../gdb/aarch64-linux-nat.c:26:
/usr/include/asm/sigcontext.h:154: note: this is the location of the previous definition
#define sve_vq_from_vl(vl) ((vl) / SVE_VQ_BYTES)
In file included from ../../gdb/aarch64-tdep.h:25,
from ../../gdb/aarch64-linux-nat.c:30:
../../gdb/arch/aarch64.h:80: error: "sve_vl_from_vq" redefined [-Werror]
#define sve_vl_from_vq(vq) ((vq) * 0x10)
In file included from /usr/include/bits/sigcontext.h:30,
from /usr/include/signal.h:291,
from build-gnulib/import/signal.h:52,
from ../../gdb/linux-nat.h:23,
from ../../gdb/aarch64-linux-nat.c:26:
/usr/include/asm/sigcontext.h:155: note: this is the location of the previous definition
#define sve_vl_from_vq(vq) ((vq) * SVE_VQ_BYTES)
In order to fix this breakage, this commit guards the declaration of
the macros using #ifndef's.
gdb/ChangeLog:
2018-06-06 Sergio Durigan Junior <sergiodj@redhat.com>
* arch/aarch64.h (sve_vg_from_vl): Guard with #ifndef.
(sve_vl_from_vg): Likewise.
(sve_vq_from_vl): Likewise.
(sve_vl_from_vq): Likewise.
(sve_vq_from_vg): Likewise.
(sve_vg_from_vq): Likewise.
.../opcodes/xtensa-dis.c: In function ‘print_insn_xtensa’:
.../opcodes/xtensa-dis.c:257:17: error: variable ‘fmt’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Werror=clobbered]
xtensa_format fmt;
^~~
.../opcodes/xtensa-dis.c:262:26: error: variable ‘valid_insn’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Werror=clobbered]
int first, first_slot, valid_insn = 0;
^~~~~~~~~~
* xtensa-dis.c (print_insn_xtensa): Init fmt and valid_insn after
setjmp. Move init for some other vars later too.
I happened to notice recently that "gdb --version" says:
GNU gdb (GDB) 8.0.50.20170911-git
Copyright (C) 2017 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-pc-linux-gnu".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word".
This is a bit on the wordy side, but also references interactive
commands, which I think doesn't really make sense for --version.
This patch removes some text from --version, while leaving it in the
"show version" output. It also adds a newline between the URLs and
the "For help, ..." text, because I thought that was easier to read.
Finally, it indents one of the URLs, since that was simpler to read,
but not the other URL, because the current format is specified by the
GNU coding standards section on "--version".
Now the --version output looks like:
GNU gdb (GDB) 8.1.50.20180511-git
Copyright (C) 2018 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Tested by the buildbot.
gdb/ChangeLog
2018-06-05 Tom Tromey <tom@tromey.com>
* cli/cli-cmds.c (show_version): Update.
* top.c (print_gdb_version): Add "interactive" parameter.
Update.
* main.c (captured_main_1): Update.
* top.h (print_gdb_version): Add "interactive" parameter and a
comment.
gdb/testsuite/ChangeLog
2018-06-05 Tom Tromey <tom@tromey.com>
* gdb.base/default.exp: Update expected "show version" output.
The DEF_ENUM_FLAGS_TYPE macro should be used with a trailing
semicolon, but the example in the comment lacks one.
gdb/ChangeLog:
2018-06-05 David Malcolm <dmalcolm@redhat.com>
* common/enum-flags.h: Add trailing semicolon to example in
comment.
This adds a "continue" response to the pager. If the user types "c"
in response to the pager prompt, pagination will be disabled for the
duration of one command -- but re-enabled afterward. This is handy if
you type a command that produces a lot of output, and you don't want
to baby-sit it by typing "return" each time the prompt comes up.
Tested by the buildbot.
gdb/ChangeLog
2018-06-05 Tom Tromey <tom@tromey.com>
PR cli/12326:
* NEWS: Add entry about pager.
* utils.c (pagination_disabled_for_command): New global.
(prompt_for_continue): Allow "c" response to prompt.
(reinitialize_more_filter): Clear
pagination_disabled_for_command.
(fputs_maybe_filtered): Check pagination_disabled_for_command.
gdb/doc/ChangeLog
2018-06-05 Tom Tromey <tom@tromey.com>
PR cli/12326:
* gdb.texinfo (Screen Size): Document "c" response to pagination
prompt.
gdb/testsuite/ChangeLog
2018-06-05 Tom Tromey <tom@tromey.com>
PR cli/12326:
* gdb.cp/static-print-quit.exp: Update.
* lib/gdb.exp (pagination_prompt): Update.
* gdb.base/page.exp: Use pagination_prompt. Add new tests.
* gdb.python/python.exp: Update.
Archive element IO is performed on the file of the containing archive,
which leads to the BFD "where" field of archives and their elements
being out of sync with the real file position. (We're talking
traditional archives here, not thin archives.) The old bfd_seek code
recognized this by not attempting to optimize away seeks for
archives. However, there was other code that could return bogus
results. For example, cache.c limits the number of open files by
closing a file and remembering its state once the limit is reached.
If bfd_tell is called on an archive element when the containing
archive is closed, it will return an invalid file pointer.
It's possible to have a valid "where" field for archives by always
using and updating the containing archive BFD. That's what this patch
does. Note that cache.c used to find the containing archive BFD
anyway for the iostream, so we're not really doing extra work, just
transferring it up to the correct abstraction level.
The patch also gets rid of some hacks. bfd_tell was called when
bfd_seek failed, in an attempt to correct "where". That's got to be
papering over another problem, so that code has been removed.
bfd_read also had an "optimiziation" to return early when the number
of bytes was zero, and bfd_seek optimized calls that didn't move the
file pointer. This was covering for a coff_slurp_line_table bug where
IO was attempted on a pe-dll BFD without an iovec.
* bfd.c (struct bfd): Update comment on "where" usage.
* bfdio.c (bfd_bwrite, bfd_stat): Use and update "iovec",
"iostream", and "where" from containing archive file. Return
error on NULL iovec.
(bfd_bread): Similarly, and return error attempted out of
bounds archive element access.
(bfd_tell, bfd_flush): Use and update "iovec", "iostream", and
"where" from containing archive file.
(bfd_seek): Likewise. Return error on NULL iovec. Don't
attempt to optimize away seeks. Don't paper over errors by
calling bfd_tell.
(bfd_get_mtime): Call bfd_stat rather than iovec->bstat.
(bfd_get_size): Likewise.
(bfd_mmap): Operate on and use iovec of containing archive
file. Return error on NULL iovec.
* cache.c (bfd_cache_lookup_worker): Abort if working on
archive element bfd.
(cache_bread_1): Delete bfd parameter, add FILE* parameter.
Don't ignore zero byte reads.
(cache_bread): Look up FILE* in cache here. Error on NULL
lookup.
(cache_bwrite): Rename "where" to "from".
(cache_bmmap): Don't handle archive elements.
* coffcode.h (coff_slurp_line_table): Exit early on zero
lineno count.
* bfd-in2.h: Regenerate.
Best practice is to not mix lseek/read with fseek/fread on the same
underlying file descriptor, as not all stdio implementations will cope.
Since the plugin uses lseek/read while bfd uses fseek/fread this patch
reopens the file for exclusive use by the plugin rather than trying to
restore the file descriptor. That allows the plugin to read the file
after plugin_call_claim_file too.
bfd/
PR 23254
* plugin.c (bfd_plugin_open_input): Allow for possibility of
nested archives. Open file again for plugin.
(try_claim): Don't save and restore file position. Close file
if not claimed.
* sysdep.h (O_BINARY): Define.
ld/
PR 23254
* plugin.c (plugin_call_claim_file): Revert 2016-07-19 patch.
(plugin_object_p): Don't dup file descriptor.
This removes the last cleanups from the Ada code by changing
ada_lookup_symbol_list's out parameter to be a std::vector, and then
fixing up the fallout.
This is a relatively shallow change. Deeper changes are possible, for
example (1) changing various other functions to accept a vector rather
than a pointer, or (2) changing ada_lookup_symbol_list to return the
vector and omitting the length entirely.
Tested by the buildbot, but I'll wait for Joel to test these as well.
gdb/ChangeLog
2018-06-04 Tom Tromey <tom@tromey.com>
* ada-lang.h (ada_lookup_symbol_list): Update.
* ada-lang.c (resolve_subexp): Update.
(symbols_are_identical_enums): Change type of syms. Remove nsyms
parameter.
(remove_extra_symbols, remove_irrelevant_renamings): Likewise.
(ada_lookup_symbol_list_worker, ada_lookup_symbol_list): Change
results parameter to std::vector.
(ada_iterate_over_symbols, ada_lookup_symbol, get_var_value):
Update.
* ada-exp.y (block_lookup): Update.
(select_possible_type_sym): Change type of syms. Remove nsyms
parameter.
(write_var_or_type, write_name_assoc): Update.
On Windows, using the "-list-thread-groups --available" GDB/MI command
before an inferior is being debugged:
% gdb -q -i=mi
=thread-group-added,id="i1"
=cmd-param-changed,param="auto-load safe-path",value="/"
(gdb)
-list-thread-groups --available
Segmentation fault
Ooops!
The SEGV happens because the -list-thread-groups --available command
triggers a windows_nat_target::xfer_partial call for a TARGET_OBJECT_OSDATA
object. Until a program is being debugged, the target_ops layer that
gets the call is the Windows "native" layer. Except for a couple of
specific objects (TARGET_OBJECT_MEMORY and TARGET_OBJECT_LIBRARIES),
this layer's xfer_partial method delegates the xfer of other objects
to the target beneath:
default:
return beneath->xfer_partial (object, annex,
readbuf, writebuf, offset, len,
xfered_len);
Unfortunately, there is no "beneath layer" in this case, so
beneath is NULL and dereferencing it leads to the SEGV.
This patch fixes the issue by checking beneath before trying
to delegate the request.
gdb/ChangeLog:
* windows-nat.c (windows_nat_target::xfer_partial): Return
TARGET_XFER_E_IO if we need to delegate to the target beneath
but BENEATH is NULL.
gdb/testsuite/ChangeLog:
* gdb.mi/list-thread-groups-no-inferior.exp: New testcase.
xtensa disassembler does not use information from the .xt.prop sections
to switch between code/data disassembly in text sections. This may
result in incorrect disassembly when data is interpreted as code and
disassembler loses synchronization with instruction stream. Use .xt.prop
section information to correctly interpret code and data and synchronize
with instruction stream.
2018-06-04 Max Filippov <jcmvbkbc@gmail.com>
bfd/
* elf32-xtensa.c (xtensa_read_table_entries): Make global.
(compute_fill_extra_space): Drop declaration. Rename function to
xtensa_compute_fill_extra_space.
(compute_ebb_actions, remove_dead_literal): Update references to
compute_fill_extra_space.
include/
* elf/xtensa.h (xtensa_read_table_entries)
(xtensa_compute_fill_extra_space): New declarations.
opcodes/
* xtensa-dis.c (bfd.h, elf/xtensa.h): New includes.
(dis_private): Add new fields for property section tracking.
(xtensa_coalesce_insn_tables, xtensa_find_table_entry)
(xtensa_instruction_fits): New functions.
(fetch_data): Bump minimal fetch size to 4.
(print_insn_xtensa): Make struct dis_private static.
Load and prepare property table on section change.
Don't disassemble literals. Don't disassemble instructions that
cross property table boundaries.
It is currently not possible to correctly match .xt.prop information
for sections with identical VMA. Allow creation of separate property
sections in the BFD. Add assembler option --separate-prop-tables to
allow creation of separate property sections.
2018-06-04 Volodymyr Arbatov <arbatov@cadence.com>
bfd/
* elf32-xtensa.c (elf32xtensa_separate_props): New global
variable.
(xtensa_add_names): New function.
(xtensa_property_section_name): Add new parameter
separate_sections, use it to choose property section name.
(xtensa_get_separate_property_section): New function.
(xtensa_get_property_section): Invoke
xtensa_get_separate_property_section to get individual property
section if it exists, common property section otherwise.
(xtensa_make_property_section): Pass elf32xtensa_separate_props
to xtensa_property_section_name.
gas/
* config/tc-xtensa.c (elf32xtensa_separate_props): New
declaration.
(option_separate_props, option_no_separate_props): New
enumeration constants.
(md_longopts): Add separate-prop-tables option.
(md_parse_option): Add cases for option_separate_props and
option_no_separate_props.
(md_show_usage): Add help for [no-]separate-prop-tables options.
The macro ELF_SECTION_IN_SEGMENT should be used when calculating if
a section maps to a segment.
gdb/
* elfread.c (elf_symfile_segments): Use ELF_SECTION_IN_SEGMENT.
