PR 22734
* doc/binutils.texi (nm): Update description to point out that
zero-initialized values can also be shown as type B, b, S or s
since they can be stored in the BSS section.
With 7042632bf7 (s390: Hook s390 into OSABI mechanism) assigning a
default target description was moved from s390_gdbarch_init to
s390_linux_init_abi_*. This causes problems when GDB is built with
--enable-targets=all and the user sets an unsupported OSABI, e.g. "set
osabi AIX". In this case there is no valid tdesc, and GDB crashes with an
internal error. Fix this by reverting parts of 7042632bf7.
gdb/ChangeLog:
* s390-linux-tdep.c: Remove includes "features/s390-linux32.c" and
"features/s390x-linux64.c".
(_initialize_s390_linux_tdep): Remove initialization of tdescs
s390_linux32 and s390x_linux64.
(s390_linux_init_abi_31, s390_linux_init_abi_64): Don't set
default tdesc.
* s390-tdep.c: Include "features/s390-linux32.c" and
"features/s390x-linux64.c".
(s390_tdesc_valid): Add check for tdesc_has_registers.
(s390_gdbarch_init): Make sure there is always a valid tdesc.
(_initialize_s390_tdep): Initialize tdesc_s390_linux32 and
tdesc_s390x_linux64.
* s390-linux-tdep.h: Move export of tdesc_s390_linux32 and
tdesc_s390x_linux64 to...
* s390-tdep.h: ...here.
In my multi-target branch I ran into problems with GDB's terminal
handling that exist in master as well, with multi-inferior debugging.
This patch adds a testcase for said problems
(gdb.multi/multi-term-settings.exp), fixes the problems, fixes PR
gdb/13211 as well (and adds a testcase for that too,
gdb.base/interrupt-daemon.exp).
The basis of the problem I ran into is the following. Consider a
scenario where you have:
- inferior 1 - started with "attach", process is running on some
other terminal.
- inferior 2 - started with "run", process is sharing gdb's terminal.
In this scenario, when you stop/resume both inferiors, you want GDB to
save/restore the terminal settings of inferior 2, the one that is
sharing GDB's terminal. I.e., you want inferior 2 to "own" the
terminal (in target_terminal::is_ours/target_terminal::is_inferior
sense).
Unfortunately, that's not what you get currently. Because GDB doesn't
know whether an attached inferior is actually sharing GDB's terminal,
it tries to save/restore its settings anyway, ignoring errors. In
this case, this is pointless, because inferior 1 is running on a
different terminal, but GDB doesn't know better.
And then, because it is only possible to have the terminal settings of
a single inferior be in effect at a time, or make one inferior/pgrp be
the terminal's foreground pgrp (aka, only one inferior can "own" the
terminal, ignoring fork children here), if GDB happens to try to
restore the terminal settings of inferior 1 first, then GDB never
restores the terminal settings of inferior 2.
This patch fixes that and a few things more along the way:
- Moves enum target_terminal::terminal_state out of the
target_terminal class (it's currently private) and makes it a
scoped enum so that it can be easily used elsewhere.
- Replaces the inflow.c:terminal_is_ours boolean with a
target_terminal_state variable. This allows distinguishing is_ours
and is_ours_for_output states. This allows finally making
child_terminal_ours_1 do something with its "output_only"
parameter.
- Makes each inferior have its own copy of the
is_ours/is_ours_for_output/is_inferior state.
- Adds a way for GDB to tell whether the inferior is sharing GDB's
terminal. Works best on Linux and Solaris; the fallback works just
as well as currently.
- With that, we can remove the inf->attach_flag tests from
child_terminal_inferior/child_terminal_ours.
- Currently target_ops.to_ours is responsible for both saving the
current inferior's terminal state, and restoring gdb's state.
Because each inferior has its own terminal state (possibly handled
by different targets in a multi-target world, even), we need to
split the inferior-saving part from the gdb-restoring part. The
patch adds a new target_ops.to_save_inferior target method for
that.
- Adds a new target_terminal::save_inferior() function, so that
sequences like:
scoped_restore_terminal_state save_state;
target_terminal::ours_for_output ();
... restore back inferiors that were
target_terminal_state::is_inferior before back to is_inferior, and
leaves inferiors that were is_ours alone.
- Along the way, this adds a default implementation of
target_pass_ctrlc to inflow.c (for inf-child.c), that handles
passing the Ctrl-C to a process running on GDB's terminal or to
some other process otherwise.
- Similarly, adds a new target default implementation of
target_interrupt, for the "interrupt" command. The current
implementation of this hook in inf-ptrace.c kills the whole process
group, but that's incorrect/undesirable because we may not be
attached to all processes in the process group. And also, it's
incorrect because inferior_process_group() doesn't really return
the inferior's real process group id if the inferior is not a
process group leader... This is the cause of PR gdb/13211 [1],
which this patch fixes. While at it, that target method's "ptid"
parameter is eliminated, because it's not really used.
- A new test is included that exercises and fixes PR gdb/13211, and
also fixes a GDB issue reported on stackoverflow that I ran into
while working on this [2]. The problem is similar to PR gdb/13211,
except that it also triggers with Ctrl-C. When debugging a daemon
(i.e., a process that disconnects from the controlling terminal and
is not a process group leader, then Ctrl-C doesn't work, you just
can't interrupt the inferior at all, resulting in a hung debug
session. The problem is that since the inferior is no longer
associated with gdb's session / controlling terminal, then trying
to put the inferior in the foreground fails. And so Ctrl-C never
reaches the inferior directly. pass_signal is only used when the
inferior is attached, but that is not the case here. This is fixed
by the new child_pass_ctrlc. Without the fix, the new
interrupt-daemon.exp testcase fails with timeout waiting for a
SIGINT that never arrives.
[1] PR gdb/13211 - Async / Process group and interrupt not working
https://sourceware.org/bugzilla/show_bug.cgi?id=13211
[2] GDB not reacting Ctrl-C when after fork() and setsid()
https://stackoverflow.com/questions/46101292/gdb-not-reacting-ctrl-c-when-after-fork-and-setsid
Note this patch does _not_ fix:
- PR gdb/14559 - The 'interrupt' command does not work if sigwait is in use
https://sourceware.org/bugzilla/show_bug.cgi?id=14559
- PR gdb/9425 - When using "sigwait" GDB doesn't trap SIGINT. Ctrl+C terminates program when should break gdb.
https://sourceware.org/bugzilla/show_bug.cgi?id=9425
The only way to fix that that I know of (without changing the kernel)
is to make GDB put inferiors in a separate session (create a
pseudo-tty master/slave pair, make the inferior run with the slave as
its terminal, and have gdb pump output/input on the master end).
gdb/ChangeLog:
2018-01-30 Pedro Alves <palves@redhat.com>
PR gdb/13211
* config.in, configure: Regenerate.
* configure.ac: Check for getpgid.
* go32-nat.c (go32_pass_ctrlc): New.
(go32_target): Install it.
* inf-child.c (inf_child_target): Install
child_terminal_save_inferior, child_pass_ctrlc and
child_interrupt.
* inf-ptrace.c (inf_ptrace_interrupt): Delete.
(inf_ptrace_target): No longer install it.
* infcmd.c (interrupt_target_1): Adjust.
* inferior.h (child_terminal_save_inferior, child_pass_ctrlc)
(child_interrupt): Declare.
(inferior::terminal_state): New.
* inflow.c (struct terminal_info): Update comments.
(inferior_process_group): Delete.
(terminal_is_ours): Delete.
(gdb_tty_state): New.
(child_terminal_init): Adjust.
(is_gdb_terminal, sharing_input_terminal_1)
(sharing_input_terminal): New functions.
(child_terminal_inferior): Adjust. Use sharing_input_terminal.
Set the process's actual process group in the foreground if
possible. Handle is_ours_for_output/is_ours distinction. Don't
mark terminal as the inferior's if not sharing GDB's terminal.
Don't check attach_flag.
(child_terminal_ours_for_output, child_terminal_ours): Adjust to
pass down a target_terminal_state.
(child_terminal_save_inferior): New, factored out from ...
(child_terminal_ours_1): ... this. Handle
target_terminal_state::is_ours_for_output.
(child_interrupt, child_pass_ctrlc): New.
(inflow_inferior_exit): Clear the inferior's terminal_state.
(copy_terminal_info): Copy the inferior's terminal state.
(_initialize_inflow): Remove reference to terminal_is_ours.
* inflow.h (inferior_process_group): Delete.
* nto-procfs.c (nto_handle_sigint, procfs_interrupt): Adjust.
* procfs.c (procfs_target): Don't install procfs_interrupt.
(procfs_interrupt): Delete.
* remote.c (remote_serial_quit_handler): Adjust.
(remote_interrupt): Remove ptid parameter. Adjust.
* target-delegates.c: Regenerate.
* target.c: Include "terminal.h".
(target_terminal::terminal_state): Rename to ...
(target_terminal::m_terminal_state): ... this.
(target_terminal::init): Adjust.
(target_terminal::inferior): Adjust to per-inferior
terminal_state.
(target_terminal::restore_inferior, target_terminal_is_ours_kind): New.
(target_terminal::ours, target_terminal::ours_for_output): Use
target_terminal_is_ours_kind.
(target_interrupt): Remove ptid parameter. Adjust.
(default_target_pass_ctrlc): Adjust.
* target.h (target_ops::to_terminal_save_inferior): New field.
(target_ops::to_interrupt): Remove ptid_t parameter.
(target_interrupt): Remove ptid_t parameter. Update comment.
(target_pass_ctrlc): Update comment.
* target/target.h (target_terminal_state): New scoped enum,
factored out of ...
(target_terminal::terminal_state): ... here.
(target_terminal::inferior): Update comments.
(target_terminal::restore_inferior): New.
(target_terminal::is_inferior, target_terminal::is_ours)
(target_terminal::is_ours_for_output): Adjust.
(target_terminal::scoped_restore_terminal_state): Adjust to
rename, and call restore_inferior() instead of inferior().
(target_terminal::scoped_restore_terminal_state::m_state): Change
type.
(target_terminal::terminal_state): Rename to ...
(target_terminal::m_terminal_state): ... this and change type.
gdb/gdbserver/ChangeLog:
2018-01-30 Pedro Alves <palves@redhat.com>
PR gdb/13211
* target.c (target_terminal::terminal_state): Rename to ...
(target_terminal::m_terminal_state): ... this.
gdb/testsuite/ChangeLog:
2018-01-30 Pedro Alves <palves@redhat.com>
PR gdb/13211
* gdb.base/interrupt-daemon.c: New.
* gdb.base/interrupt-daemon.exp: New.
* gdb.multi/multi-term-settings.c: New.
* gdb.multi/multi-term-settings.exp: New.
This patch gets rid of linux-nat.c's custom
target_terminal_inferior/target_terminal_ours implementations.
The only remaining reason those overrides exist is to install
clear_sigint_trap in order to pass Ctrl-C/SIGINT to the inferior
process in case the inferior is not sharing GDB's terminal (and
target_wait was called without TARGET_WNOHANG).
However, I think that's better handled by QUIT / target_pass_ctrlc
nowadays. Going that route avoids the issue with set_sigint_trap only
looking at the current inferior to know whether to override SIGINT or
not, which doesn't really work correctly with multi-inferior in the
picture. Also centralizing on a single SIGINT handler as much as
possible seems better considering a future multi-target world.
Tested on x86-64 GNU/Linux.
gdb/ChangeLog:
2018-01-30 Pedro Alves <palves@redhat.com>
* linux-nat.c (wait_for_signal): New function.
(wait_lwp, linux_nat_wait_1): Use it instead of calling sigsuspend
directly.
(async_terminal_is_ours)
(linux_nat_terminal_inferior, linux_nat_terminal_ours): Delete.
(linux_nat_add_target): Don't override
to_terminal_inferior/to_terminal_ours.
We can't map different disk pages into the same memory page; The last
page mapped will simply overwrite any previous pages. The
executable/non-executable new_segment test ignored this fact, leading
to a ld.so segfault on hppa when .dynamic is overwritten with zeros.
This patch moves existing tests for demand paging with lma on the same
memory page, to a new test performed before any case where we want a
new segment due to protection or loadable conflicts.
PR 22758
* elf.c (_bfd_elf_map_sections_to_segments): Don't start a new
segment when demand paged with lma on the same page. Test this
before load/non-load, executable/non-executable,
writable/non-writable tests and simplify. Delete bogus relro
condition in writable/non-writable test. Delete outdated
comment. Formatting.
The last test of this testcase fails when run on Ubuntu 16.04 using
the system compiler (16.04):
FAIL: gdb.base/break.exp: verify that they were cleared
This is because the testcase expected that a breakpoint on line 47 of break.c...
printf ("%d\n", factorial (atoi ("6"))); /* set breakpoint 1 here */
... would actually be inserted on an instruction belonging to
that line. However, what actually happens is that system GCC on
that version of Ubuntu ends up inlining everything, including
the call to printf, thus reporting every instruction of generated
for this line of code as belonging to a different function. As
a result, GDB ends up insering the breakpoint on the next line
of code, which is line 49:
(gdb) break break.c:$l
Breakpoint 3 at 0x4005c1: file /[...]/gdb.base/break.c, line 49.
This causes a spurious failure in the "info break" test later on,
as it assumed that the breakpoint above is inserted on line 47:
gdb_test "info break" "$srcfile:$line" "verify that they were cleared"
This patch fixes the issue by saving the actual source location where
the breakpoint was inserted.
gdb/testsuite/ChangeLog:
* gdb.base/break.exp: Save the location where the breakpoint
on break.c:47 was actually inserted when debugging the version
compiled at -O2 and use it in the expected output of the "info
break" test performed soon after.
tested on x86_64-linux, with two configurations:
- Ubuntu 16.04 with the system compiler (breakpoint lands on line 49)
- Ubuntu 16.04 with GCC 7.3.1 (breakpoint lands on line 47)
Fix commit d664fd41e1 ("Ignore dynamic references on forced local
symbols") and use alternative test actions and match patterns to
correctly handle messages like:
.../ld/ld-new: Removing unused section '.reginfo' in file 'tmpdir/pr22649-2b.o'
or:
.../ld/ld-new: Removing unused section '.MIPS.options' in file 'tmpdir/pr22649-2b.o'
produced by LD on MIPS targets, removing:
FAIL: Build pr22649-2c.so
FAIL: Build pr22649-2d.so
test suite failures and tightening checks made with `pr22649-2a.so' and
`pr22649-2b.so' test cases.
Keep the original empty action with `pr22649-2c.so' and `pr22649-2d.so'
links and MIPS/ELF targets though, because for them the linker does not
garbage-collect the `.reginfo' section. This is because the section has
its flags set differently by code in GAS in `md_begin':
if (strncmp (TARGET_OS, "elf", 3) != 0)
flags |= SEC_ALLOC | SEC_LOAD;
and consequently BFD linker code in `_bfd_elf_gc_mark_extra_sections':
else if (((isec->flags & SEC_DEBUGGING) != 0
|| (isec->flags & (SEC_ALLOC | SEC_LOAD | SEC_RELOC)) == 0)
&& elf_next_in_group (isec) == NULL)
isec->gc_mark = 1;
marks these sections to be kept due to their SEC_ALLOC, SEC_LOAD and
SEC_RELOC flags all being zero (`.reginfo' sections never have
relocations attached).
ld/
PR ld/22649
* testsuite/ld-elf/pr22649-2ab-mips.msg: New stderr output.
* testsuite/ld-elf/pr22649-2cd-mips.msg: New stderr output.
* testsuite/ld-elf/shared.exp: Use the new outputs with
`mips*-*-*' targets.
Update `readelf' symbol table dump match patterns to handle SHN_MIPS_DATA
and SHN_MIPS_TEXT special section indexes produced by the IRIX ELF format
variation used with a number of MIPS targets and printed by `readelf' as
PRC[0xff02] and PRC[0xff01] respectively, correcting LD test suite
failures:
extra regexps in .../ld/testsuite/ld-elf/comm-data1.sd starting with "^ +[0-9]+: +[0-9a-f]+ +0 +OBJECT +GLOBAL +DEFAULT +[0-9]+ +foo$"
EOF from dump.out
FAIL: Common symbol override test (auxiliary shared object build)
extra regexps in .../ld/testsuite/ld-elf/pr21703-shared.sd starting with "^ +[0-9]+: +[0-9a-f]+ +4 +FUNC +GLOBAL +DEFAULT +[0-9] +foo@FOO$"
EOF from dump.out
FAIL: PR ld/21703 shared
extra regexps in .../ld/testsuite/ld-elf/comm-data1.sd starting with "^ +[0-9]+: +[0-9a-f]+ +0 +OBJECT +GLOBAL +DEFAULT +[0-9]+ +foo$"
EOF from dump.out
FAIL: MIPS o32/copyreloc common symbol override test (auxiliary shared object build)
extra regexps in .../ld/testsuite/ld-elf/comm-data1.sd starting with "^ +[0-9]+: +[0-9a-f]+ +0 +OBJECT +GLOBAL +DEFAULT +[0-9]+ +foo$"
EOF from dump.out
FAIL: MIPS o32/nocopyreloc common symbol override test (auxiliary shared object build)
observed due to file contents like:
7: 5ffe02e8 0 OBJECT GLOBAL DEFAULT PRC[0xff02] foo
shown by `readelf -s' vs:
+[0-9]+: +[0-9a-f]+ +0 +OBJECT +GLOBAL +DEFAULT +[0-9]+ +foo
pattern expected, triggered by widening testing to these targets by commit
05a5feafdd ("Rewrite check_shared_lib_support").
ld/
* testsuite/ld-elf/comm-data1.sd: Alternatively accept
`PRC[0xff02]' in place of a regular section index.
* testsuite/ld-elf/pr21703-shared.sd: Likewise `PRC[0xff01]'.
bfd/
* elflink.c (bfd_elf_define_start_stop): Make __start and __stop
symbols dynamic.
ld/
* testsuite/ld-elf/pr21964-3a.c: New file.
* testsuite/ld-elf/pr21964-3c.c: New file.
* testsuite/ld-elf/shared.exp: Run new __start/__stop testcase.
On the SPARC architecture, you need to pass a special flag to GNU as
when you're assembling PIC/PIE code or else you get a wrong relocation
for the GOT symbol.
ld/
* testsuite/ld-elf/shared.exp (AFLAGS_PIC): Define on SPARC.
(pr22269-1): Pass AFLAGS_PIC to the assembler.
The .dc.a directive has wrong size (32 bits) on SPARC 64-bit because
the assembler sets the correct BFD architecture only at the very end
of the processing and it's too late for the directive. It's fixed by
defining TARGET_MACH and making it return a sensible default value.
gas/
* config/tc-sparc.h (sparc_mach): Declare.
(TARGET_MACH): Define to above.
* config/tc-sparc.c (sparc_mach): New function.
(sparc_md_end): Minor tweak.
ld/
* testsuite/ld-elf/pr22450.d: Remove reference to SPARC64.
Update the ld-mips-elf/comm-data.exp test script to correctly select
emulations for targets using non-traditional MIPS emulation and also
correctly select ABIs for targets that do not support all of them, and
finally use the default endianness selection to benefit targets which
support only one, complementing commit 05a5feafdd ("Rewrite
check_shared_lib_support") and removing numerous test failures such as:
FAIL: MIPS o32/copyreloc common symbol override test (auxiliary shared object build)
FAIL: MIPS o32/copyreloc common symbol override test
FAIL: MIPS o32/nocopyreloc common symbol override test (auxiliary shared objectbuild)
FAIL: MIPS o32/nocopyreloc common symbol override test
FAIL: MIPS n32/copyreloc common symbol override test (auxiliary shared object build)
FAIL: MIPS n32/copyreloc common symbol override test
FAIL: MIPS n32/nocopyreloc common symbol override test (auxiliary shared objectbuild)
FAIL: MIPS n32/nocopyreloc common symbol override test
due to:
.../ld/ld-new: unrecognised emulation mode: elf32btsmip
Supported emulations: elf64btsmip elf64ltsmip
or:
.../ld/ld-new: unrecognised emulation mode: elf32btsmip
Supported emulations: elf32ebmip
or:
.../ld/ld-new: unrecognised emulation mode: elf32btsmip
Supported emulations: elf32l4300
etc., and:
ERROR: -n32 -march=mips3 -EB -call_shared .../ld/testsuite/ld-mips-elf/../ld-elf/comm-data1.s: assembly failed
UNRESOLVED: MIPS n32/copyreloc common symbol override test (auxiliary shared object build)
ERROR: -n32 -march=mips3 -EB -call_nonpic .../ld/testsuite/ld-mips-elf/../ld-elf/comm-data2.s: assembly failed
UNRESOLVED: MIPS n32/copyreloc common symbol override test
ERROR: -n32 -march=mips3 -EB -call_shared .../ld/testsuite/ld-mips-elf/../ld-elf/comm-data1.s: assembly failed
UNRESOLVED: MIPS n32/nocopyreloc common symbol override test (auxiliary shared object build)
ERROR: -n32 -march=mips3 -EB -call_nonpic .../ld/testsuite/ld-mips-elf/../ld-elf/comm-data2.s: assembly failed
UNRESOLVED: MIPS n32/nocopyreloc common symbol override test
due to:
Assembler messages:
Fatal error: selected target format 'elf32-nbigmips' unknown
and:
ERROR: -64 -march=mips3 -EB -call_shared .../ld/testsuite/ld-mips-elf/../ld-elf/comm-data1.s: assembly failed
UNRESOLVED: MIPS n64/copyreloc common symbol override test (auxiliary shared object build)
ERROR: -64 -march=mips3 -EB --defsym ELF64=1 -call_nonpic .../ld/testsuite/ld-mips-elf/../ld-elf/comm-data2.s:assembly failed
UNRESOLVED: MIPS n64/copyreloc common symbol override test
ERROR: -64 -march=mips3 -EB -call_shared .../ld/testsuite/ld-mips-elf/../ld-elf/comm-data1.s: assembly failed
UNRESOLVED: MIPS n64/nocopyreloc common symbol override test (auxiliary shared object build)
ERROR: -64 -march=mips3 -EB --defsym ELF64=1 -call_nonpic .../ld/testsuite/ld-mips-elf/../ld-elf/comm-data2.s:assembly failed
UNRESOLVED: MIPS n64/nocopyreloc common symbol override test
due to:
Assembler messages:
Fatal error: no compiled in support for 64 bit object file format
ld/
* testsuite/ld-mips-elf/comm-data.exp: Correct support for
targets using non-traditional MIPS emulation or having a limited
selection of ABIs available. Don't force big endianness, use
defaults.
This patch fixes a regression that has been introduced by:
commit bc09b0c14f
Date: Fri Jan 19 11:48:11 2018 -0500
Make linux_nat_detach/thread_db_detach use the inferior parameter
It is possible to trigger this failure with gdb.base/foll-fork.exp (in
which case a bunch of ERROR's will be printed), but one can also use
the test below.
Consider the following example program:
#include <unistd.h>
int
main (int argc, char *argv[])
{
fork ();
return 0;
}
When running it under gdbserver:
# ./gdb/gdbserver/gdbserver --multi --once :2345
And debugging it under GDB, we see a segmentation fault:
# ./gdb/gdb -q -batch -ex 'set remote exec-file ./a.out' -ex 'tar extended-remote :2345' -ex r ./a.out
Starting program:
...
[Detaching after fork from child process 16102.]
Segmentation fault (core dumped)
The problem happens on inferior.c:detach_inferior:
void
detach_inferior (inferior *inf)
{
/* Save the pid, since exit_inferior_1 will reset it. */
int pid = inf->pid;
^^^^^^^^^
exit_inferior_1 (inf, 0);
if (print_inferior_events)
printf_unfiltered (_("[Inferior %d detached]\n"), pid);
}
When this code is called from remote.c:remote_follow_fork, the PID is
valid but there is no 'inferior' associated with it, which means that
'inf == NULL'.
The proper fix here is to not call "detach_inferior" when doing remote
follow-fork, because we don't have an inferior to detach on the host
side.
Before bc09b0c1, that call was already a nop (exit_inferior_1 bails
out early if you pass it a NULL inferior), except that it printed
"Inferior PID detached" when "set print inferior-events" is on. Since
native debugging doesn't call detach_inferior in this case, removing
the call from remote aligns remote debugging output with native
debugging output further.
This has been regtested using BuildBot and no regressions were found.
gdb/ChangeLog:
2018-01-29 Sergio Durigan Junior <sergiodj@redhat.com>
* remote.c (remote_follow_fork): Don't call "detach_inferior".
Skip static executable tests if static executable is unsupported.
Tested on Linux/x86 without libc.a.
PR ld/22732
* testsuite/config/default.exp (STATIC_LDFLAGS): New. Set to
"-static" if target compiler supports it.
* testsuite/ld-bootstrap/bootstrap.exp: Skip static executable
tests if target compiler doesn't support it.
* testsuite/ld-ifunc/ifunc.exp: Likewise.
* testsuite/lib/ld-lib.exp (run_ld_link_exec_tests): Likewise.
(run_cc_link_tests): Likewise.
I got some crashes while doing some work with dwarf2_per_objfile. It
turns out that dwarf2_per_objfile_free is using the dwarf2_per_objfile
objects after their destructor has ran.
The easiest way to reproduce this is to run the inferior twice (do
"start" twice). Currently, it goes unnoticed, but when I tried to
change all_comp_units and all_type_units to std::vectors, things started
crashing.
The dwarf2_per_objfile objects get destroyed here:
#0 dwarf2_per_objfile::~dwarf2_per_objfile (this=0x35afe70, __in_chrg=<optimized out>) at /home/emaisin/src/binutils-gdb/gdb/dwarf2read.c:2422
#1 0x0000000000833282 in dwarf2_free_objfile (objfile=0x356cff0) at /home/emaisin/src/binutils-gdb/gdb/dwarf2read.c:25363
#2 0x0000000000699255 in elf_symfile_finish (objfile=0x356cff0) at /home/emaisin/src/binutils-gdb/gdb/elfread.c:1309
#3 0x0000000000911ed3 in objfile::~objfile (this=0x356cff0, __in_chrg=<optimized out>) at /home/emaisin/src/binutils-gdb/gdb/objfiles.c:674
and just after that the dwarf2read per-objfile registry cleanup function
gets called:
#0 dwarf2_per_objfile_free (objfile=0x356cff0, d=0x35afe70) at /home/emaisin/src/binutils-gdb/gdb/dwarf2read.c:25667
... registry boilerplate ...
#4 0x00000000009103ea in objfile_free_data (container=0x356cff0) at /home/emaisin/src/binutils-gdb/gdb/objfiles.c:61
#5 0x0000000000911ee2 in objfile::~objfile (this=0x356cff0, __in_chrg=<optimized out>) at /home/emaisin/src/binutils-gdb/gdb/objfiles.c:678
In dwarf2_per_objfile_free, we access fields of the dwarf2_per_objfile
object, which is invalid since its destructor has been executed.
This patch moves the content of dwarf2_per_objfile_free to the
destructor of dwarf2_per_objfile. The call to
register_objfile_data_with_cleanup in _initialize_dwarf2_read can be
changed to the simpler register_objfile_data.
gdb/ChangeLog:
* dwarf2read.c (free_dwo_files): Add forward-declaration.
(dwarf2_per_objfile::~dwarf2_per_objfile): Move content from
dwarf2_per_objfile_free here.
(dwarf2_per_objfile_free): Remove.
(_initialize_dwarf2_read): Don't register
dwarf2_per_objfile_free as a registry cleanup.
Since dummy.o must be placed before
-Wl,--whole-archive tmpdir/pr22751.a -Wl,--no-whole-archive
to trigger the bug, this patch adds an optional trailing ld options to
run_ld_link_exec_tests.
PR ld/22751
* testsuite/config/default.exp (INT128_CFLAGS): New.
* testsuite/ld-plugin/lto.exp (INT128_CFLAGS): New.
Run ld/22751 tests.
* testsuite/ld-plugin/pr22751.c: New file.
* testsuite/lib/ld-lib.exp (run_ld_link_exec_tests): Add
ld trailing options.
So what was happening was that the file added from libgcc.a during the
rescan was not put on file_chain. map_input_to_output_sections then
doesn't see the file and its sections are treated as discarded.
The file_chain list pointer bug was caused by that fact that an
archive element claimed by the plugin does not have my_archive set.
Or more correctly, the actual archive element does have my_archive
set, but this bfd is replaced with a dummy bfd that doesn't have
my_archive set.
PR 22751
* ldlang.c (find_rescan_insertion): Look past bfds with claim_archive
set.
The error is triggered by including python-internal.h, and the
error message is:
In file included from d:\usr\lib\gcc\mingw32\6.3.0\include\c++\math.h:36:0,
from build-gnulib/import/math.h:27,
from d:/usr/Python26/include/pyport.h:235,
from d:/usr/Python26/include/Python.h:58,
from python/python-internal.h:94,
from python/py-arch.c:24:
d:\usr\lib\gcc\mingw32\6.3.0\include\c++\cmath:1157:11: error: '::hypot' has not been declared
using ::hypot;
^~~~~
This happens because Python headers define 'hypot' to expand to
'_hypot' in the Windows builds.
gdb/ChangeLog:
2018-01-27 Eli Zaretskii <eliz@gnu.org>
* python/python-internal.h (_hypot) [__MINGW32__]: Define back to
'hypoth'. This avoids a compilation error.
gdb/ChangeLog:
2018-01-27 Eli Zaretskii <eliz@gnu.org>
* simple-object-xcoff.c (simple_object_xcoff_find_sections): Avoid
compilation warning in 32-bit builds not supported by
AC_SYS_LARGEFILE.
Fix an issue with commit 73934d319d ("Disable .gnu.hash on MIPS
targets"), <https://sourceware.org/ml/binutils/2006-07/msg00341.html>,
which in turn caused a regression with commit 861fb55ab5 ("Defer
allocation of R_MIPS_REL32 GOT slots"),
<https://sourceware.org/ml/binutils/2008-08/msg00096.html>, and use
`mipself.em' as the extra emulation file for `mips-*-windiss' targets,
removing a segmentation fault triggered as `_bfd_mips_elf_final_link'
calls `htab_traverse' to process LA25 stubs with `htab->la25_stubs'
being NULL. This is in turn due to `_bfd_mips_elf_init_stubs' not
having been called, which is only done by `mipself.em'. No LA25 stubs
are supposed to be produced for `mips-*-windiss' targets, however the
internal data structures have to be initialized.
ld/
* emulparams/elf32mipswindiss.sh (EXTRA_EM_FILE): Set to
`mipself'.
Fix a commit 0a44bf6950 ("mips-vxworks support"),
<https://sourceware.org/ml/binutils/2006-03/msg00179.html>, regression
and override the choice of the `vxworks' target environment introduced
with commit ea3eed1500 ("Add generic vxworks GAS target."),
<https://sourceware.org/ml/binutils/2005-01/msg00052.html>, for
`mips-*-windiss' targets as they have not been converted to the VxWorks
target format introduced with the former commit, removing a GAS target
format selection failure:
Assembler messages:
Fatal error: selected target format 'elf32-bigmips-vxworks' unknown
on any assembly attempt with `mips-windiss' and equivalent target
configurations.
gas/
* configure.tgt: Use generic emulation for `mips-*-windiss',
overriding the blanket choice made for `*-*-windiss'.
Use `mips-*-sysv4*' rather than `mips-*-sysv4*MP*' to match the system
type for System V Release 4 MIPS targets, removing a GAS target
selection failure:
Assembler messages:
Fatal error: selected target format 'elf32-bigmips' unknown
on any assembly attempt with `mips-sysv4' and equivalent target
configurations. These would typically be called `mips-sni-sysv4'
(Sinix) vs `mips-dde-sysv4.2MP' (Supermax).
This corrects commit 8614eeee67 ("Traditional MIPS patches"),
<https://sourceware.org/ml/binutils/2000-07/msg00018.html>, making GAS
target selection match commit dd745cfae5 ("Traditional MIPS patches"),
<https://sourceware.org/ml/binutils/2000-07/msg00018.html>, and commit
3548145dcb ("Traditional MIPS patches"),
<https://sourceware.org/ml/binutils/2000-07/msg00018.html>, which added
support for these targets to BFD and LD respectively.
gas/
* configure.tgt: Use `mips-*-sysv4*' rather than
`mips-*-sysv4*MP*'.
This patch fixes a number of bugs in ppc32 plt stub matching code.
1) The 4-insn stubs for shared libs and PIEs weren't matched.
2) The executable stub miscalculated PLT entry address (by oring a
sign-extended quantity rather than adding).
3) Comments were not accurate.
In addition, the insn arrays are made const.
* ppc-linux-tdep.c (powerpc32_plt_stub): Make const.
(powerpc32_plt_stub_so_1): Rename from powerpc32_plt_stub_so.
Remove nop. Make const. Comment.
(powerpc32_plt_stub_so_2): New.
(POWERPC32_PLT_CHECK_LEN): Rename from POWERPC32_PLT_STUB_LEN.
Correct count. Update uses.
(ppc_skip_trampoline_code): Match powerpc32_plt_stub_so_2 too.
Move common code reading PLT entry word. Correct
powerpc32_plt_stub PLT address calculation.
* ppc64-tdep.c (ppc64_standard_linkage1): Make const.
(ppc64_standard_linkage2, ppc64_standard_linkage3): Likewise.
(ppc64_standard_linkage4, ppc64_standard_linkage5): Likewise.
(ppc64_standard_linkage6, ppc64_standard_linkage7): Likewise.
(ppc64_standard_linkage8): Likewise.
* rs6000-tdep.c (ppc_insns_match_pattern): Make pattern const.
Correct insns description.
* ppc-tdep.h (ppc_insns_match_pattern): Update prototype.
Reviewed-By: Yao Qi <qiyaoltc@gmail.com>
This patch fixes a case where a user had a C-representable named
section in both the executable and shared libraries, and of course
wanted the size of the local section in the executable, not the
dynamic section. It does mean that __start and __stop symbols don't
behave exactly like PROVIDEd symbols, but I think that's a reasonable
difference particularly since this is the way they used to behave.
* elflink.c (bfd_elf_define_start_stop): Override symbols when
they are defined dynamically.
https://bugzilla.redhat.com/show_bug.cgi?id=1523457
I haven't analyzed this myself, I'm relying on Nick's excellent
analysis. What I believe is happening is that after some number of
stub sizing iterations, a long-branch stub needs to be converted to a
plt-branch, but either due to stub alignment or other stubs shrinking
in size, the stub group section size doesn't change.
That means we exit from ppc64_elf_size_stubs after sizing with an
incorrect layout, in fact the additional .branch_lt entry overlays
.got! Since .TOC. is normally set to .got + 0x8000 the stub sizing
code decides that entry is within +/-32k of the TOC pointer and so a
three insn stub is sufficient. When we come to build the stubs using
a correct non-overlaying layout, a four insn plt-branch stub is
generated and the stub group size doesn't match that calculated
earlier.
* elf64-ppc.c (ppc64_elf_size_stubs): Iterate sizing when
.branch_lt changes size.
There are actually 2 different bugs:
1. TLS transition is broken in PIE mode.
2. TLS is broken in PIC/PIE mode when the __tls_get_addr symbol
is versioned (as is the case on Linux and Solaris at least).
The 1st bug is fixed by reverting the problematic change for now
(note that the associated test doesn't pass on SPARC because of another
issue so there is no formal regression in the testsuite). The 2nd bug
is fixed by changing the call to _bfd_generic_link_add_one_symbol
on __tls_get_addr into a mere lookup in _bfd_sparc_elf_check_relocs.
bfd/
* elfxx-sparc.c (_bfd_sparc_elf_check_relocs) <R_SPARC_TLS_GD_CALL>:
Do a mere lookup of the __tls_get_addr symbol instead of adding it.
Revert
2017-10-19 H.J. Lu <hongjiu.lu@intel.com>
PR ld/22263
* elfxx-sparc.c (sparc_elf_tls_transition): Replace
bfd_link_pic with !bfd_link_executable, !bfd_link_pic with
bfd_link_executable for TLS check.
(_bfd_sparc_elf_check_relocs): Likewise.
(allocate_dynrelocs): Likewise.
(_bfd_sparc_elf_relocate_section): Likewise.
ld/
* testsuite/ld-sparc/sparc.exp (32-bit: Helper shared library):
Link with a version script.
(32-bit: TLS -fpie): New test.
(64-bit: Helper shared library): Link with a version script.
(64-bit: TLS -fpie): New test.
(64-bit: GOTDATA relocations): Pass -Av9 to the assembler.
* testsuite/ld-sparc/tlslib.ver: New file.
* testsuite/ld-sparc/tlspie32.dd: Likewise.
* testsuite/ld-sparc/tlspie32.s: Likewise.
* testsuite/ld-sparc/tlspie64.dd: Likewise.
* testsuite/ld-sparc/tlspie64.s: Likewise.
* testsuite/ld-sparc/tlssunbin32.dd: Adjust for versioned symbol.
* testsuite/ld-sparc/tlssunbin32.rd: Likewise.
* testsuite/ld-sparc/tlssunbin32.sd: Likewise.
* testsuite/ld-sparc/tlssunbin64.dd: Likewise.
* testsuite/ld-sparc/tlssunbin64.rd: Likewise.
* testsuite/ld-sparc/tlssunbin64.sd: Likewise.
GCC PR83906 [1] is about a GCC/libstdc++ GDB/Python type printer
testcase failing randomly, as shown by running (in libstdc++'s
testsuite):
make check RUNTESTFLAGS=prettyprinters.exp=80276.cc
in a loop. Sometimes you get this:
FAIL: libstdc++-prettyprinters/80276.cc whatis p4
I.e., this:
type = std::unique_ptr<std::vector<std::unique_ptr<std::list<std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >>[]>>[99]>
instead of this:
type = std::unique_ptr<std::vector<std::unique_ptr<std::list<std::string>[]>>[99]>
Jonathan Wakely tracked it on the printer side to this bit in
libstdc++'s type printer:
if self.type_obj == type_obj:
return strip_inline_namespaces(self.name)
This assumes the two types resolve to the same gdb.Type but some times
the comparison unexpectedly fails.
Running the testcase manually under Valgrind finds the problem in GDB:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
==6118== Conditional jump or move depends on uninitialised value(s)
==6118== at 0x4C35CB0: bcmp (vg_replace_strmem.c:1100)
==6118== by 0x6F773A: check_types_equal(type*, type*, VEC_type_equality_entry_d**) (gdbtypes.c:3515)
==6118== by 0x6F7B00: check_types_worklist(VEC_type_equality_entry_d**, bcache*) (gdbtypes.c:3618)
==6118== by 0x6F7C03: types_deeply_equal(type*, type*) (gdbtypes.c:3655)
==6118== by 0x4D5B06: typy_richcompare(_object*, _object*, int) (py-type.c:1007)
==6118== by 0x63D7E6C: PyObject_RichCompare (object.c:961)
==6118== by 0x646EAEC: PyEval_EvalFrameEx (ceval.c:4960)
==6118== by 0x646DC08: PyEval_EvalFrameEx (ceval.c:4519)
==6118== by 0x646DC08: PyEval_EvalFrameEx (ceval.c:4519)
==6118== by 0x646DC08: PyEval_EvalFrameEx (ceval.c:4519)
==6118== by 0x646DC08: PyEval_EvalFrameEx (ceval.c:4519)
==6118== by 0x646DC08: PyEval_EvalFrameEx (ceval.c:4519)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
That "bcmp" call is really a memcmp call in check_types_equal. The
problem is that gdb is memcmp'ing two objects that are equal in value:
(top-gdb) p *TYPE_RANGE_DATA (type1)
$1 = {low = {kind = PROP_CONST, data = {const_val = 0, baton = 0x0}}, high = {kind = PROP_CONST, data = {const_val = 15, baton = 0xf}}, flag_upper_bound_is_count = 0,
flag_bound_evaluated = 0}
(top-gdb) p *TYPE_RANGE_DATA (type2)
$2 = {low = {kind = PROP_CONST, data = {const_val = 0, baton = 0x0}}, high = {kind = PROP_CONST, data = {const_val = 15, baton = 0xf}}, flag_upper_bound_is_count = 0,
flag_bound_evaluated = 0}
but differ in padding. Notice the 4-byte hole:
(top-gdb) ptype /o range_bounds
/* offset | size */ type = struct range_bounds {
/* 0 | 16 */ struct dynamic_prop {
/* 0 | 4 */ dynamic_prop_kind kind;
/* XXX 4-byte hole */
/* 8 | 8 */ union dynamic_prop_data {
/* 8 */ LONGEST const_val;
/* 8 */ void *baton;
/* total size (bytes): 8 */
} data;
which is filled with garbage:
(top-gdb) x /40bx TYPE_RANGE_DATA (type1)
0x2fa7ea0: 0x01 0x00 0x00 0x00 0x43 0x01 0x00 0x00
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
0x2fa7ea8: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x2fa7eb0: 0x01 0x00 0x00 0x00 0xfe 0x7f 0x00 0x00
0x2fa7eb8: 0x0f 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x2fa7ec0: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
(top-gdb) x /40bx TYPE_RANGE_DATA (type2)
0x20379b0: 0x01 0x00 0x00 0x00 0xfe 0x7f 0x00 0x00
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
0x20379b8: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x20379c0: 0x01 0x00 0x00 0x00 0xfe 0x7f 0x00 0x00
0x20379c8: 0x0f 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x20379d0: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
(top-gdb) p memcmp (TYPE_RANGE_DATA (type1), TYPE_RANGE_DATA (type2), sizeof (*TYPE_RANGE_DATA (type1)))
$3 = -187
In some cases objects of type range_bounds are memset when allocated,
but then their dynamic_prop low/high fields are copied over from some
template dynamic_prop object that wasn't memset. E.g.,
create_static_range_type's low/high locals are left with garbage in
the padding, and then that padding is copied over to the range_bounds
object's low/high fields.
At first, I considered making sure to always memset range_bounds
objects, thinking that maybe type objects are being put in some bcache
instance somewhere. But then I hacked bcache/bcache_full to poison
non-pod types, and made dynamic_prop a non-pod, and GDB still
compiled.
So given that, it seems safest to not assume padding will always be
memset, and instead treat them as regular value types, implementing
(in)equality operators and using those instead of memcmp.
This fixes the random FAILs in GCC's testcase.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83906
gdb/ChangeLog:
2018-01-24 Pedro Alves <palves@redhat.com>
GCC PR libstdc++/83906
* gdbtypes.c (operator==(const dynamic_prop &,
const dynamic_prop &)): New.
(operator==(const range_bounds &, const range_bounds &)): New.
(check_types_equal): Use them instead of memcmp.
* gdbtypes.h (operator==(const dynamic_prop &,
const dynamic_prop &)): Declare.
(operator!=(const dynamic_prop &, const dynamic_prop &)): Declare.
(operator==(const range_bounds &, const range_bounds &)): Declare.
(operator!=(const range_bounds &, const range_bounds &)): Declare.
Correct an issue with the `mips64*-ps2-elf*' target introduced with
commit e407c74b5b ("Support for MIPS R5900 (Sony Playstation 2)"),
<https://sourceware.org/ml/binutils/2012-12/msg00240.html> and make
the n32 ABI the default for GAS, consistently with how BFD and LD
are configured for this target.
gas/
* configure.ac: Also set `mips_default_abi' to N32_ABI for
`mips64*-ps2-elf*'.
* configure: Regenerate.
Nick Clifton
Philipp Rudo
Pedro Alves
Alan Modra
Joel Brobecker
Maciej W. Rozycki
GDB Administrator
Eric Botcazou
Sergio Durigan Junior
H.J. Lu
Simon Marchi
Eli Zaretskii
Alan Hayward
Renlin Li