There is no need to generate compressed debug section if compressed
section size is the same as before compression. We should xfail the
compressed debug section test if there are no compressed sections
binutils/testsuite/
* binutils-all/compress.exp (compression_used): New.
Xfail test if compression didn't make the section smaller.
gas/
2015-04-05 H.J. Lu <hongjiu.lu@intel.com>
* write.c (compress_debug): Don't write the zlib header if
compressed section size is the same as before compression.
The nrun conversion was slightly incorrect in how it stopped when an
exception occurred. We still set cpu.asregs.exception, but nothing
was checking it anymore. Convert all of that to sim_engine_halt.
To keep things from regressing again, add a basic testsuite too.
For objcopy and relocatable link, we should also preserve the
SHF_COMPRESSED bit if not decompress.
* elf.c (_bfd_elf_init_private_section_data): Also preserve the
SHF_COMPRESSED bit if not decompress.
This paramater is no longer useful after the previous commit, so remove
it as a cleanup.
gdb/ChangeLog:
* gdbtypes.c (is_dynamic_type_internal): Remove the unused
"top_level" parameter.
(resolve_dynamic_type_internal): Remove the unused "top_level"
parameter. Update call to is_dynamic_type_internal.
(is_dynamic_type): Update call to is_dynamic_type_internal.
(resolve_dynamic_range): Update call to
resolve_dynamic_type_internal.
(resolve_dynamic_union): Likewise.
(resolve_dynamic_struct): Likewise.
(resolve_dynamic_type): Likewise.
Even when referenced types are dynamic, the corresponding referencing
type should not be considered as dynamic: it's only a pointer. This
prevents reference type for values not in memory to be resolved.
gdb/ChangeLog:
* gdbtypes.c (is_dynamic_type_internal): Remove special handling
of TYPE_CODE_REF types so that they are not considered as
dynamic depending on the referenced type.
(resolve_dynamic_type_internal): Likewise.
gdb/testsuite/ChangeLog:
* gdb.ada/funcall_ref.exp: New file.
* gdb.ada/funcall_ref/foo.adb: New file.
Way back in aba6488e0b, a bunch of signal
defines were changed to TARGET_SIGNAL_xxx. For d10v, the transition was
incomplete which lead to sim_stop_reason using the new set but sim_resume
still using the old set. Which meant in some cases, the sim would never
actually stop.
Convert all the remaining SIGxxx defines in here to TARGET_SIGNAL_xxx.
This has the nice side effect of fixing the testsuite.
2015-03-27 Renlin Li <renlin.li@arm.com>
gas/
* config/tc-aarch64.c (mapping_state): Emit MAP_DATA within text section in order.
(mapping_state_2): Don't emit MAP_DATA here.
(s_aarch64_inst): Align frag during state transition.
(md_assemble): Likewise.
I see these two fails in no-unwaited-for-left.exp in remote testing
for aarch64-linux target.
...
continue
Continuing.
warning: Remote failure reply: E.No unwaited-for children left.
[Thread 1084] #2 stopped.
(gdb) FAIL: gdb.threads/no-unwaited-for-left.exp: continue stops when thread 2 exits
....
continue
Continuing.
warning: Remote failure reply: E.No unwaited-for children left.
[Thread 1081] #1 stopped.
(gdb) FAIL: gdb.threads/no-unwaited-for-left.exp: continue stops when the main thread exits
I checked the gdb.log on buildbot, and find that these two fails also
appear on Debian-i686-native-extended-gdbserver and Fedora-ppc64be-native-gdbserver-m64.
I recall that they are about local/remote parity, and related RSP is missing.
There has been already a PR 14618 about it. This patch is to kfail them
on remote target.
gdb/testsuite:
2015-04-02 Yao Qi <yao.qi@linaro.org>
* gdb.threads/no-unwaited-for-left.exp: Set up kfail if target
is remote.
This commit makes GDB default to a sysroot of "target:".
One testcase needed updating as a result of this change.
gdb/ChangeLog:
* main.c (captured_main): Set gdb_sysroot to "target:"
if not otherwise set.
gdb/testsuite/ChangeLog:
* gdb.base/break-probes.exp: Cope with "target:" sysroot.
This commit adds support for filenames prefixed with "target:" to
exec_file_attach. This is required to correctly follow inferior
exec* calls when a gdb_sysroot prefixed with "target:" is set.
gdb/ChangeLog:
* exec.c (exec_file_attach): Support "target:" filenames.
This commit updates solib_find to strip the "target:" prefix from
gdb_sysroot when accessing local files. This ensures that the same
search algorithm is used for local files regardless of whether a
"target:" prefix was used or not. It also avoids cluttering GDB's
output with unnecessary "target:" prefixes on paths.
gdb/ChangeLog:
* solib.c (solib_find): Strip "target:" prefix from sysroot
if accessing local files.
symfile_bfd_open handled what were remote files as a special case.
Converting from "remote:" files to "target:" made symfile_bfd_open
look like this:
if remote:
open bfd, check format, etc
return
local-specific stuff
open bfd, check format, etc
return
This commit rearranges symfile_bfd_open to remove the duplicated
code, like this:
if local:
local-specific stuff
open bfd, check format, etc
return
gdb/ChangeLog:
* symfile.c (symfile_bfd_open): Reorder to remove duplicated
checks and error messages.
The functionality of "target:" sysroots is a superset of the
functionality of "remote:" sysroots. This commit causes the
"set sysroot" command to rewrite "remote:" sysroots as "target:"
sysroots and replaces "remote:" specific code with "target:"
specific code where still necessary.
gdb/ChangeLog:
* remote.h (REMOTE_SYSROOT_PREFIX): Remove definition.
(remote_filename_p): Remove declaration.
(remote_bfd_open): Likewise.
* remote.c (remote_bfd_iovec_open): Remove function.
(remote_bfd_iovec_close): Likewise.
(remote_bfd_iovec_pread): Likewise.
(remote_bfd_iovec_stat): Likewise.
(remote_filename_p): Likewise.
(remote_bfd_open): Likewise.
* symfile.h (gdb_bfd_open_maybe_remote): Remove declaration.
* symfile.c (separate_debug_file_exists): Use gdb_bfd_open.
(gdb_bfd_open_maybe_remote): Remove function.
(symfile_bfd_open): Replace remote filename check with
target filename check.
(reread_symbols): Use gdb_bfd_open.
* build-id.c (gdbcore.h): New include.
(build_id_to_debug_bfd): Use gdb_bfd_open.
* infcmd.c (attach_command_post_wait): Remove remote filename
check.
* solib.c (solib_find): Replace remote-specific handling with
target-specific handling. Update comments where necessary.
(solib_bfd_open): Replace remote-specific handling with
target-specific handling.
(gdb_sysroot_changed): New function.
(_initialize_solib): Call the above when gdb_sysroot changes.
* windows-tdep.c (gdbcore.h): New include.
(windows_xfer_shared_library): Use gdb_bfd_open.
This commit updates gdb_bfd_open to access files using target
fileio functions if the supplied path starts with "target:"
and if the local and target filesystems are not the same.
This allows users to specify "set sysroot target:" and have
GDB access files locally or from the remote as appropriate.
The new functions in gdb_bfd.c are copies of functions from
remote.c. This duplication is intentional and will be removed
by the next commit in this series.
gdb/ChangeLog:
* gdb/gdb_bfd.h (TARGET_SYSROOT_PREFIX): New definition.
(is_target_filename): New declaration.
(gdb_bfd_has_target_filename): Likewise.
(gdb_bfd_open): Update documentation comment.
* gdb_bfd.c (target.h): New include.
(gdb/fileio.h): Likewise.
(is_target_filename): New function.
(gdb_bfd_has_target_filename): Likewise.
(fileio_errno_to_host): Likewise.
(gdb_bfd_iovec_fileio_open): Likewise.
(gdb_bfd_iovec_fileio_pread): Likewise.
(gdb_bfd_iovec_fileio_close): Likewise.
(gdb_bfd_iovec_fileio_fstat): Likewise.
(gdb_bfd_open): Use target fileio to access paths prefixed
with "target:" where necessary.
This commit introduces a new target method target_filesystem_is_local
which can be used to determine whether or not the filesystem accessed
by the target_fileio_* methods is the local filesystem.
gdb/ChangeLog:
* target.h (struct target_ops) <to_filesystem_is_local>:
New field.
(target_filesystem_is_local): New macro.
* target-delegates.c: Regenerate.
* remote.c (remote_filesystem_is_local): New function.
(init_remote_ops): Initialize to_filesystem_is_local.
This commit introduces a new target method target_fileio_fstat
which can be used to retrieve information about files opened with
target_fileio_open.
gdb/ChangeLog:
* target.h (struct target_ops) <to_fileio_fstat>: New field.
(target_fileio_fstat): New declaration.
* target.c (target_fileio_fstat): New function.
* inf-child.c (inf_child_fileio_fstat): Likewise.
(inf_child_target): Initialize to_fileio_fstat.
* remote.c (init_remote_ops): Likewise.
My all-stop-on-top-of-non-stop series manages to shows regressions due
to this latent bug. currently_stepping returns true if
stepped_breakpoint is set. Obviously we should clear
it before checking currently_stepping, not after.
Tested on x86_64 Fedora 20.
gdb/ChangeLog:
2015-04-01 Pedro Alves <palves@redhat.com>
* infrun.c (resume): Check currently_stepping after clearing
stepped_breakpoint, not before.
If interrupt_and_wait manages to trigger the FAIL path, we get:
ERROR OCCURED: can't read "test": no such variable
gdb/testsuite/ChangeLog:
2015-04-01 Pedro Alves <palves@redhat.com>
* gdb.threads/manythreads.exp (interrupt_and_wait): Pass $message
to fail instead of non-existent $test.
H.J. Lu
Mike Frysinger
GDB Administrator
Pierre-Marie de Rodat
Nick Clifton
Andrew Turner
Renlin Li
Ed Maste
Yao Qi
Gary Benson
Evandro Menezes
Evandro Menezes
Sasha Smundak
Pedro Alves