bfd/
* elfnn-riscv.c (_bfd_riscv_relax_pc) <R_RISCV_PCREL_LO12_I>: New local
hi_sec_off which is symbol address with addend subtracted. Use in
riscv_find_pcgp_hi_reloc and riscv_record_pcgp_lo_reloc calls.
bfd/
* elfnn-riscv.c (riscv_resolve_pcrel_lo_relocs): Add check for reloc
overflow with addend. Use reloc_dangerous instead of reloc_overflow.
Add strings for the two errors handled here.
(riscv_elf_relocate_section) In case R_RISCV_PCREL_LO12_I, rewrite
comment. Only give error with addend when used with section symbol.
In case bfd_reloc_dangerous, update error string.
ld/
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Run pcrel-lo-addend-2.
* testsuite/ld-riscv/elf/ld-riscv-elf/pcrel-lo-addend-2.d: New.
* testsuite/ld-riscv/elf/ld-riscv-elf/pcrel-lo-addend-2.s: New.
* testsuite/ld-riscv/elf/ld-riscv-elf/pcrel-lo-addend.d: Update name
and error string.
When opening a BFD for update, as gdb --write does, modifications to
anything but the contents of sections is restricted.
Do not try to write back any ELF headers in this case.
bfd/ChangeLog
2018-09-24 Jozef Lawrynowicz <jozef.l@mittosystems.com>
PR gdb/20948
* elf.c (_bfd_elf_write_object_contents): Return from function
early if abfd->direction == both_direction.
gdb/testsuite/ChangeLog
2018-09-24 Jozef Lawrynowicz <jozef.l@mittosystems.com>
PR gdb/20948
* gdb.base/write_mem.exp: New test.
* gdb.base/write_mem.c: Likewise.
I noticed that some code in gdb was doing:
char *mumble = getenv (...)
However, using "const char *" here would be clearer.
This patch fixes the instances I could readily build.
Tested by rebuilding.
gdb/ChangeLog
2018-09-24 Tom Tromey <tom@tromey.com>
* common/pathstuff.c (get_standard_cache_dir): Make
"xdg_cache_home" and "home" const.
* top.c (init_history): Make "tmpenv" const.
* main.c (get_init_files): Make "homedir" const.
A convention in the Python layer is that raising a gdb.GdbError will
not print the Python stack -- instead the exception is treated as any
other gdb exception.
PR python/18852 asks that this treatment be extended the the
get_set_value method of gdb.Parameter. This makes sense, because it
lets Python-created parameters act like gdb parameters.
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/18852:
* python/py-param.c (get_set_value): Use gdbpy_handle_exception.
gdb/doc/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/18852:
* python.texi (Parameters In Python): Document exception behavior
of get_set_string.
gdb/testsuite/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/18852:
* gdb.python/py-parameter.exp: Add test for parameter that throws
on "set".
I noticed two nearly identical copies of the same code for handling
gdb.GdbError. The only differences were in some error messages.
These differences didn't seem very important, so this patch pulls the
code out into a new function.
2018-09-23 Tom Tromey <tom@tromey.com>
* python/py-function.c (fnpy_call): Use gdbpy_handle_exception.
* python/py-cmd.c (cmdpy_function): Use gdbpy_handle_exception.
* python/python-internal.h (gdbpy_handle_exception): Declare.
* python/py-utils.c (gdbpy_handle_exception): New function.
typy_template_argument did not check if the template argument was
non-negative. A negative value could cause a gdb crash.
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/17284:
* python/py-type.c (typy_template_argument): Check for negative
argument number.
gdb/testsuite/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/17284:
* gdb.python/py-template.exp (test_template_arg): Add test for
negative template argument number.
PR python/14062 points out that errors coming from the gdb.post_event
callback are not reported. This can make it hard to understand why
your Python code in gdb isn't working.
Because users have control over whether exceptions are printed at all,
it seems good to simply have post_event report errors in the usual
way.
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/14062:
* python/python.c (gdbpy_run_events): Do not ignore exceptions.
gdb/testsuite/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/14062:
* gdb.python/python.exp: Add test for post_event error.
PR python/18170 questions why it's not possible to convert a pointer
value to a Python int.
Digging a bit shows that the Python 2.7 int() constructor will happily
return a long in some cases. And, it seems gdb already understands
this in other places -- this is what gdb_py_object_from_longest
handles.
So, this patch simply extends valpy_int to allow pointer conversions,
as valpy_long does.
gdb/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/18170:
* python/py-value.c (valpy_int): Allow conversion from pointer
type.
gdb/testsuite/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/18170:
* gdb.python/py-value.exp (test_value_numeric_ops): Add tests to
convert pointers to int and long.
PR python/20126 points out that sometimes the conversion of a
gdb.Value can result in a negative Python integer. This happens
because valpy_int does not examine the signedness of the value's type.
gdb/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/20126:
* python/py-value.c (valpy_int): Respect type sign.
gdb/testsuite/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/20126:
* gdb.python/py-value.exp (test_value_numeric_ops): Add
signed-ness conversion tests.
PR python/18352 points out that the gdb Python code can't convert an
integer-valued gdb.Value to a Python float. While writing the test I
noticed that, similarly, converting integer gdb.Values to float does
not work. However, all of these cases seem reasonable.
gdb/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/18352;
* python/py-value.c (valpy_float): Allow conversions from int or
char.
(valpy_int, valpy_long): Allow conversions from float.
gdb/testsuite/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/18352;
* gdb.python/py-value.exp (test_float_conversion): New proc.
Use it.
2018-09-23 Sandra Loosemore <sandra@codesourcery.com>
opcodes/
* nios2-dis.c (nios2_print_insn_arg): Make sure signed conversions
are used when extracting signed fields and converting them to
potentially 64-bit types.
I noticed a couple of spots in gdb that were opening files but not
marking the file descriptors as close-on-exec. This patch fixes
these.
There are still a few more of these, but they are in code that I can't
compile, so I'd prefer not to touch.
gdb/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
* ctf.c (ctf_start): Use gdb_fopen_cloexec.
* common/scoped_mmap.c (mmap_file): Use gdb_open_cloexec.
Unlike Solaris/SPARC, the __sighndlr function isn't recognized as part
of a signal handler, causing a couple of testcases to fail.
The following patch fixes that. A followup patch will move this to
common code to avoid such unnecessary discrepancies between
Solaris/SPARC and x86 in the future.
While this fixes a couple of backtraces to now correctly print
#1 <signal handler called>
they often fail later with
#2 0x0ff3ffffff00857f in ?? ()
Backtrace stopped: Cannot access memory at address 0xff3000002e0886f
which needs further investigation.
Tested on amd64-pc-solaris2.11 (running the tests with both -m64 and
-m32).
* amd64-sol2-tdep.c (amd64_sol2_sigtramp_p): Also recognize
__sighndlr.
* i386-sol2-tdep.c (i386_sol2_sigtramp_p): Likewise.
This causes the inferior to stop with SIGTTIN if it tries to read from the
terminal after it has been continued.
See https://cygwin.com/ml/cygwin/2016-09/msg00285.html for reproduction.
Since MinGW doesn't have a tcsetpgrp(), I don't think this problem would be
observed there, but Cygwin does so target_terminal::ours() will call it.
Calling target_terminal::ours() here seems to be is no longer appropriate
after the "Merge async and sync code paths" changes (as the inferior is now
in a separate process group even in sync mode(?), which is always used on
Windows targets)
This call was added in commit c44537cf (and see
https://sourceware.org/ml/gdb-patches/2007-02/msg00167.html for what it
fixed, which is not regressed by this change)
When windows_nat_target::wait() is entered, the inferior is running (either
it's been just been started or attached to, or windows_continue() was
called), so grabbing the controlling terminal away from it here seems to be
wrong, since infrun.c takes care of calling target_terminal::ours() when the
inferior stops.
gdb/ChangeLog:
2018-08-02 Jon Turney <jon.turney@dronecode.org.uk>
* windows-nat.c (windows_nat_target::wait): Remove a spurious
target_terminal::ours().
When building with --enable-targets=all on macOS, I get this error:
CXX aarch64-linux-tdep.o
/Users/simark/src/binutils-gdb/gdb/aarch64-linux-tdep.c:328:7: error: no matching function for call to 'store_integer'
store_integer ((gdb_byte *)&vg_target, sizeof (uint64_t), byte_order,
^~~~~~~~~~~~~
/Users/simark/src/binutils-gdb/gdb/defs.h:556:13: note: candidate template ignored: requirement 'Or<is_same<unsigned long long, long>, is_same<unsigned long long, unsigned long> >::value' was not satisfied [with T = unsigned long long]
extern void store_integer (gdb_byte *addr, int len, enum bfd_endian byte_order,
^
I believe it's because uint64_t is defined as "unsigned long long" on macOS,
even though "unsigned long" is also 64 bits. Other 64-bits platforms define
uint64_t as "unsigned long".
This makes the type of the argument to store_integer (unsigned long long) not
match the requirement that it must be the same as ULONGEST, which is unsigned
long.
Fix it by changing the type of the vl variable to be ULONGEST, which is what
extract_unsigned_integer returns anyway.
gdb/ChangeLog:
* aarch64-linux-tdep.c (aarch64_linux_supply_sve_regset): Change type
of vl to ULONGEST.
echo "__thread char *p;" | gcc -c -g -xc - -o thread.o
With current powerpc64le-linux-gcc has this reloc in .debug_info
0000000000000025 0000000d0000004e R_PPC64_DTPREL64 0000000000000000 p + 8000
That stops me looking at .debug_info.
~/build/gas-virgin/powerpc64le-linux/binutils/readelf -wi thread.o
readelf: Warning: unable to apply unsupported reloc type 78 to section .debug_info
Older readelf continued on after the warning, dumping .debug_info.
* readelf.c (apply_relocations): Don't return FALSE for warnings.
clang gives these errors:
In file included from /Users/simark/src/binutils-gdb/opcodes/csky-dis.c:30:
/Users/simark/src/binutils-gdb/opcodes/csky-opc.h:2330:8: error: missing field 'transfer' initializer [-Werror,-Wmissing-field-initializers]
{NULL}
^
/Users/simark/src/binutils-gdb/opcodes/csky-opc.h:8126:10: error: missing field 'transfer' initializer [-Werror,-Wmissing-field-initializers]
{NULL}
^
They go away when we Initialize all fields. I noticed there used to be some
files built with -Wno-missing-field-initializers, but it's not the case
anymore, since commit e7ae278d04. There is still
a NO_WMISSING_FIELD_INITIALIZERS variable defined in the Makefile, but it's
unused, so I removed it to avoid further confusion.
opcodes/ChangeLog:
* Makefile.am: Remove NO_WMISSING_FIELD_INITIALIZERS.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* configure.ac: Remove check for -Wno-missing-field-initializers.
* csky-opc.h (csky_v1_opcodes): Initialize all fields of last element.
(csky_v2_opcodes): Likewise.
The fls function already exists on macOS and FreeBSD (and probably others),
leading to this error:
/Users/simark/src/binutils-gdb/bfd/elf32-nds32.c:5074:1: error: static declaration of 'fls' follows non-static declaration
fls (register unsigned int x)
^
/usr/include/strings.h:87:6: note: previous declaration is here
int fls(int) __OSX_AVAILABLE_STARTING(__MAC_10_5, __IPHONE_2_0);
^
Add a configure-time check for it, and only define it if the system doesn't
provide it.
bfd/ChangeLog:
* configure.ac: Check for fls.
* elf32-nds32.c (fls): Only define if !HAVE_FLS.
* config.in: Re-generate.
* configure: Re-generate.
commit b8426d169d
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Fri Sep 21 04:24:40 2018 -0700
gas: Make bfin-parse.c/rl78-parse.c/rx-parse.c depend on bfd/reloc.c
It is for PR gas/23691, not PR gas/23692.
Since bfin-parse.c, rl78-parse.c and rx-parse.c use BFD_RELOC_XXX, we
need to regenerate them when bfd/reloc.c changhes.
PR gas/23692
* Makefile.am (bfin-parse.c): Depend on $(srcdir)/../bfd/reloc.c.
(rl78-parse.c): Likewise.
(rx-parse.c): Likewise.
* Makefile.in: Regenerated.
We shouldn't include zero size sections at start of PT_NOTE segment,
similar to PT_DYNAMIC segment.
PR binutils/23694
* include/elf/internal.h (ELF_SECTION_IN_SEGMENT_1): Don't
include zero size sections at start of PT_NOTE segment.
This procfs.c (and friends) cleanup patch grew along a couple of lines:
* First I noticed that PR_MODEL_NATIVE is always defined now that
Solaris 10 is the minimum supported version.
* Then there was a cleanup that I'd missed when removing support for
!NEW_PROC_API, IRIX, and Tru64 UNIX: given that sysset_t is no longer
dynamic, there's no need for the special sysset_t_alloc, but we can
just use XNEW instead.
* Then I found one of those ARI warning mails on gdb-patches, discovered
how to run it myself and fixed a large number of the warnings, among
them all uses of sprintf.
I had to silence the warnings in only 3 instances of the same issue,
namely references to LDT in function names which are due to the
libthread_db API.
* Even so, there were several formatting glitches, like braces around
single statements in an if, which I chose to fix while I was at it.
The result has been tested on amd64-pc-solaris2.11 and
amd64-pc-solaris2.11.
* proc-utils.h (PROC_CTL_WORD_TYPE): Remove.
* procfs.c: Don't check for PR_MODEL_NATIVE definition.
* sparc-sol2-nat.c: Likewise. Remove Linux, __arch64__ references.
* sol-thread.c (ps_pdmodel): Don't guard definition.
* procfs.c: Fix formatting.
* procfs.c (sysset_t_alloc): Remove.
(create_procinfo): Use XNEW instead of sysset_t_alloc.
(procfs_debug_inferior): Likewise.
(procfs_set_exec_trap): Likewise.
(proc_set_traced_sysentry): Don't allocate argp dynamically.
(proc_set_traced_sysexit): Likewise.
* procfs.c (create_procinfo): Use xsnprintf to fix ARI warning.
(dead_procinfo): Likewise.
(proc_warn): Likewise.
(proc_error): Likewise.
(proc_get_LDT_entry): Likewise.
(do_attach): Likewise.
(procfs_target::pid_to_str): Likewise.
(iterate_over_mappings): Likewise.
* procfs.c (create_procinfo): Fix ARI warning.
(proc_get_status): Likewise.
(proc_stop_process): Likewise.
(proc_run_process): Likewise.
(proc_kill): Likewise.
(proc_get_LDT_entry): Likewise.
(procfs_find_LDT_entry): Likewise.
(proc_update_threads): Likewise.
(proc_iterate_over_threads): Likewise.
(do_attach): Likewise.
(procfs_xfer_memory): Likewise.
(invalidate_cache): Likewise.
(procfs_target::resume): Likewise.
(procfs_init_inferior): Likewise.
(procfs_set_exec_trap): Likewise.
(procfs_target::thread_alive): Likewise.
(procfs_target::pid_to_exec_file): Likewise.
(iterate_over_mappings): Likewise.
(procfs_target::make_corefile_notes): Likewise.
* sol-thread.c (sol_thread_target::thread_alive): Likewise.
* procfs.c (procfs_find_LDT_entry): Silence ARI warning.
(procfs_find_LDT_entry): Likewise.
* sol-thread.c (ps_lgetLDT): Likewise.
binutils/
* dwarf.c (display_debug_lines_decoded): Add display of is_stmt.
* testsuite/binutils-all/dw5.W: Deal with the consequences.
* testsuite/binutils-all/objdump.WL: Deal with the consequences.
I was looking at GDB testcase results for arm-eabi target with qemu and
noticed that register groups returned by the qemu can have '_' in the
name e.g. 'cp_regs'. The reggroups.exp fails to recognize that as group
name. Fixed by adding '_' in the pattern.
2018-09-20 Hafiz Abid Qadeer <abidh@codesourcery.com>
gdb.base/reggroups.exp (fetch_reggroups): Add '_' in match pattern.
Fix a build error:
cc1: warnings being treated as errors
.../gas/config/tc-s12z.c: In function 'lex_opr':
.../gas/config/tc-s12z.c:617: warning: comparison between signed and unsigned
.../gas/config/tc-s12z.c:624: warning: comparison between signed and unsigned
make[4]: *** [config/tc-s12z.o] Error 1
observed with GCC 4.1.2 with the `s12z-elf' target.
Here we have a constant assembly instruction operand, whose value is
within the 24-bit unsigned range, to be placed in a machine instruction
such as to use the least space-consuming encoding. So the sign of that
value does not matter, because signed values are out of range and are
not supposed to appear here, and we only have this warning here because
the `X_add_number' member of `struct expressionS' is of the `offsetT'
type, which is signed.
Use an auxiliary variable of an unsigned data type then, observing that
both `offsetT' and `valueT' have the same width, as they correspond to
`bfd_signed_vma' and `bfd_vma' respectively.
gas/
* config/tc-s12z.c (lex_opr): Use an auxiliary unsigned variable
in encoding a constant operand.
Fix a build error:
cc1: warnings being treated as errors
.../gas/config/tc-ppc.c: In function 'ppc_dwsect':
.../gas/config/tc-ppc.c:4091: warning: comparison between signed and unsigned
make[4]: *** [config/tc-ppc.o] Error 1
observed with GCC 4.1.2 with the `powerpc-beos' target.
Here `flag' identifies the type of a DWARF section, as used with the the
first operand to the `.dwsect' pseudo-op, and has no notion of a sign,
or for that matter being arithmetic in the first place[1]. We already
handle this correctly with the `flag' member of the `xcoff_dwsect_name'
structure, however not in the local variable used in GAS to hold the
parsed value of said `.dwsect' pseudo-op's operand.
Use an unsigned data type in GAS then too, observing that both `offsetT'
and `valueT' have the same width, as they correspond to `bfd_signed_vma'
and `bfd_vma' respectively.
References:
[1] "AIX Version 7.2: Assembler Language Reference", IBM Corporation
2015, 2018, Section ".dwsect pseudo-op", pp. 531-532
gas/
* config/tc-ppc.c (ppc_dwsect): Use `valueT' rather than
`offsetT' as the type of `flag'.
Fix build errors:
cc1: warnings being treated as errors
In file included from .../opcodes/arc-opc.c:2630:
.../opcodes/arc-nps400-tbl.h:38: warning: integer constant is too large for 'long' type
.../opcodes/arc-nps400-tbl.h:38: warning: integer constant is too large for 'long' type
.../opcodes/arc-nps400-tbl.h:41: warning: integer constant is too large for 'long' type
.../opcodes/arc-nps400-tbl.h:41: warning: integer constant is too large for 'long' type
[...]
.../opcodes/arc-nps400-tbl.h:712: warning: integer constant is too large for 'long' type
.../opcodes/arc-nps400-tbl.h:712: warning: integer constant is too large for 'long' type
.../opcodes/arc-nps400-tbl.h:715: warning: integer constant is too large for 'long' type
.../opcodes/arc-nps400-tbl.h:715: warning: integer constant is too large for 'long' type
make[4]: *** [arc-opc.lo] Error 1
and:
cc1: warnings being treated as errors
.../gas/config/tc-arc.c: In function 'md_number_to_chars_midend':
.../gas/config/tc-arc.c:802: warning: integer constant is too large for 'long' type
.../gas/config/tc-arc.c:810: warning: integer constant is too large for 'long' type
make[4]: *** [config/tc-arc.o] Error 1
observed with GCC 4.1.2 and presumably other C89 compilers with the
`arc-elf' and `arc-linux-gnu' targets, caused by the use of constants
the values of which are outside the range of the `int' type (or the
`long' type if it is of the same with). In the C89 language standard
such constants are not implicitly converted to a wider type and an
explicit suffix is required for such constants.
Add a `ull' suffix then as with such constants used in other ports.
gas/
* config/tc-arc.c (md_number_to_chars_midend): Append `ull' to
large constants.
opcodes/
* arc-nps400-tbl.h: Append `ull' to large constants throughout.
Remove duplicate `rs6000-*-aix5.[01]' and `rs6000-*-aix[5-9]*' target
configuration selectors meant to correspond to `powerpc64-*-aix5.[01]'
and `powerpc64-*-aix[5-9]*' respectively for the purpose of BFD target
vector selection in `config.bfd'.
These selectors were added with commit 9a9e2ca332 ("rs6000 xcoff bfd
config"), <https://sourceware.org/ml/binutils/2010-12/msg00372.html>,
and have been dead right from the beginning, because they appear twice
each in the case statement, which means the earlier instance of each
takes precedence and the other one is ignored. Here ones that alias to
`powerpc-*-aix5.[01]' and `powerpc-*-aix[5-9]*' respectively immediately
above are used instead.
bfd/
* config.bfd <rs6000-*-aix5.[01], rs6000-*-aix[5-9]*>: Remove
duplicate `case' selectors.
We have not only removed all unsupported and obsolete code, but also supported lost of new features,
including better link-time relaxations and TLS implementations. Besides, the files generated by the
newly assembler and linker usually get higher performance and more optimized code size.
ld * emultempl/nds32elf.em (hyper_relax): New variable.
(nds32_elf_create_output_section_statements):
the parameters of bfd_elf32_nds32_set_target_option
(PARSE_AND_LIST_PROLOGUE, PARSE_AND_LIST_OPTIONS,
PARSE_AND_LIST_ARGS_CASES): Add new option --mhyper-relax.
* emultempl/nds32elf.em (nds32_elf_after_open): Updated.
* emultempl/nds32elf.em (tls_desc_trampoline): New variable.
* (nds32_elf_create_output_section_statements): Updated.
* (nds32_elf_after_parse): Disable relaxations when PIC is enable.
* (PARSE_AND_LIST_PROLOGUE, PARSE_AND_LIST_OPTIONS,
PARSE_AND_LIST_ARGS_CASES): Add new option --m[no-]tlsdesc-trampoline.
include * elf/nds32.h: Remove the unused target features.
* dis-asm.h (disassemble_init_nds32): Declared.
* elf/nds32.h (E_NDS32_NULL): Removed.
(E_NDS32_HAS_DSP_INST, E_NDS32_HAS_ZOL): New.
* opcode/nds32.h: Ident.
(N32_SUB6, INSN_LW): New macros.
(enum n32_opcodes): Updated.
* elf/nds32.h: Doc fixes.
* elf/nds32.h: Add R_NDS32_LSI.
* elf/nds32.h: Add new relocations for TLS.
gas * config/tc-nds32.c: Remove the unused target features.
(nds32_relax_relocs, md_pseudo_table, nds32_elf_record_fixup_exp,
nds32_set_elf_flags_by_insn, nds32_insert_relax_entry,
nds32_apply_fix): Likewise.
(nds32_no_ex9_begin): Removed.
* config/tc-nds32.c (add_mapping_symbol_for_align,
make_mapping_symbol, add_mapping_symbol): New functions.
* config/tc-nds32.h (enum mstate): New.
(nds32_segment_info_type): Likewise.
* configure.ac (--enable-dsp-ext, --enable-zol-ext): New options.
* config.in: Regenerated.
* configure: Regenerated.
* config/tc-nds32.c (nds32_dx_regs):
Set the value according to the configuration.
(nds32_perf_ext, nds32_perf_ext2, nds32_string_ext, nds32_audio_ext):
Likewise.
(nds32_dsp_ext): New variable. Set the value according to the
configuration.
(nds32_zol_ext): Likewise.
(asm_desc, nds32_pseudo_opcode_table): Make them static.
(nds32_set_elf_flags_by_insn): Updated.
(nds32_check_insn_available): Updated.
(nds32_str_tolower): New function.
* config/tc-nds32.c (relax_table): Updated.
(md_begin): Updated.
(md_assemble): Use XNEW macro to allocate space for `insn.info',
and then remember to free it.
(md_section_align): Cast (-1) to ValueT.
(nds32_get_align): Cast (~0U) to addressT.
(nds32_relax_branch_instructions): Updated.
(md_convert_frag): Add new local variable `final_r_type'.
(invalid_prev_frag): Add new bfd_boolean parameter `relax'.
All callers changed.
* config/tc-nds32.c (struct nds32_relocs_pattern): Add `insn' field.
(struct nds32_hint_map): Add `option_list' field.
(struct suffix_name, suffix_table): Remove the unused `pic' field.
(do_pseudo_b, do_pseudo_bal): Remove the suffix checking.
(do_pseudo_la_internal, do_pseudo_pushpopm): Indent.
(relax_hint_bias, relax_hint_id_current): New static variables.
(reset_bias, relax_hint_begin): New variables.
(nds_itoa): New function.
(CLEAN_REG, GET_OPCODE): New macros.
(struct relax_hint_id): New.
(nds32_relax_hint): For .relax_hint directive, we can use `begin'
and `end' to mark the relax pattern without giving exactly id number.
(nds32_elf_append_relax_relocs): Handle the case that the .relax_hint
directives are attached to pseudo instruction.
(nds32_elf_save_pseudo_pattern): Change the second parameter from
instruction's opcode to byte code.
(nds32_elf_build_relax_relation): Add new bfd_boolean parameter
`pseudo_hint'.
(nds32_lookup_pseudo_opcode): Fix the overflow issue.
(enum nds32_insn_type): Add N32_RELAX_ALU1 and N32_RELAX_16BIT.
(nds32_elf_record_fixup_exp, relax_ls_table, hint_map,
nds32_find_reloc_table, nds32_match_hint_insn, nds32_parse_name):
Updated.
* config/tc-nds32.h (MAX_RELAX_NUM): Extend it to 6.
(enum nds32_relax_hint_type): Merge NDS32_RELAX_HINT_LA and
NDS32_RELAX_HINT_LS into NDS32_RELAX_HINT_LALS. Add
NDS32_RELAX_HINT_LA_PLT, NDS32_RELAX_HINT_LA_GOT and
NDS32_RELAX_HINT_LA_GOTOFF.
* config/tc-nds32.h (relax_ls_table): Add floating load/store
to gp relax pattern.
(hint_map, nds32_find_reloc_table): Likewise.
* configure.ac: Define NDS32_LINUX_TOOLCHAIN.
* configure: Regenerated.
* config.in: Regenerated.
* config/tc-nds32.h (enum nds32_ramp): Updated.
(enum nds32_relax_hint_type): Likewise.
* config/tc-nds32.c: Include "errno.h" and "limits.h".
(relax_ls_table): Add TLS relax patterns.
(nds32_elf_append_relax_relocs): Attach BFD_RELOC_NDS32_GROUP on
each instructions of TLS patterns.
(nds32_elf_record_fixup_exp): Updated.
(nds32_apply_fix): Likewise.
(suffix_table): Add TLSDESC suffix.
binutils* testsuite/binutils-all/objcopy.exp: Set the unsupported reloc number
from 215 to 255 for NDS32.
bfd * elf32-nds32.c (nds32_elf_relax_loadstore):
Remove the unused target features.
(bfd_elf32_nds32_set_target_option): Remove the unused parameters.
(nds32_elf_relax_piclo12, nds32_elf_relax_letlslo12,
nds32_elf_relax_letlsadd, nds32_elf_relax_letlsls,
nds32_elf_relax_pltgot_suff, nds32_elf_relax_got_suff
nds32_elf_relax_gotoff_suff, calculate_plt_memory_address,
calculate_plt_offset, calculate_got_memory_address,
nds32_elf_check_dup_relocs): Removed.
All callers changed.
* elf32-nds32.h: Remove the unused macros and defines.
(elf_nds32_link_hash_table): Remove the unused variable.
(bfd_elf32_nds32_set_target_option): Update prototype.
(nds32_elf_ex9_init): Removed.
* elf32-nds32.c (nds32_convert_32_to_16): Updated.
* elf32-nds32.c (HOWTO2, HOWTO3): Define new HOWTO macros
to initialize array nds32_elf_howto_table in any order
without lots of EMPTY_HOWTO.
(nds32_reloc_map): Updated.
* reloc.c: Add BFD_RELOC_NDS32_LSI.
* bfd-in2.h: Regenerated.
* bfd/libbfd.h: Regenerated.
* elf32-nds32.c (nds32_elf_relax_howto_table): Add R_NDS32_LSI.
(nds32_reloc_map): Likewise.
(nds32_elf_relax_flsi): New function.
(nds32_elf_relax_section): Support floating load/store relaxation.
* elf32-nds32.c (NDS32_GUARD_SEC_P, elf32_nds32_local_gp_offset):
New macro.
(struct elf_nds32_link_hash_entry): New `offset_to_gp' field.
(struct elf_nds32_obj_tdata): New `offset_to_gp' and `hdr_size' fields.
(elf32_nds32_allocate_local_sym_info, nds32_elf_relax_guard,
nds32_elf_is_target_special_symbol, nds32_elf_maybe_function_sym):
New functions.
(nds32_info_to_howto_rel): Add BFD_ASSERT.
(bfd_elf32_bfd_reloc_type_table_lookup, nds32_elf_link_hash_newfunc,
nds32_elf_link_hash_table_create, nds32_elf_relocate_section,
nds32_elf_relax_loadstore, nds32_elf_relax_lo12, nds32_relax_adjust_label,
bfd_elf32_nds32_set_target_option, nds32_fag_mark_relax): Updated.
(nds32_elf_final_sda_base): Improve it to find the better gp value.
(insert_nds32_elf_blank): Must consider `len' when inserting blanks.
* elf32-nds32.h (bfd_elf32_nds32_set_target_option): Update prototype.
(struct elf_nds32_link_hash_table): Add new variable `hyper_relax'.
* elf32-nds32.c (elf32_nds32_allocate_dynrelocs): New function.
(create_got_section): Likewise.
(allocate_dynrelocs, nds32_elf_size_dynamic_sections,
nds32_elf_relocate_section, nds32_elf_finish_dynamic_symbol): Updated.
(nds32_elf_check_relocs): Fix the issue that the shared library may
has TEXTREL entry in the dynamic section.
(nds32_elf_create_dynamic_sections): Enable to call readonly_dynrelocs
since the TEXTREL issue is fixed in the nds32_elf_check_relocs.
(nds32_elf_finish_dynamic_sections): Update and add DT_RELASZ
dynamic entry.
(calculate_offset): Remove the unused parameter `pic_ext_target' and
related codes.
All callers changed.
(elf_backend_dtrel_excludes_plt): Disable it temporarily since it
will cause some errors for our test cases.
* elf32-nds32.c (nds32_elf_merge_private_bfd_data): Allow to link the
generic object.
* reloc.c: Add TLS relocations.
* libbfd.h: Regenerated.
* bfd-in2.h: Regenerated.
* elf32-nds32.h (struct section_id_list_t): New.
(elf32_nds32_lookup_section_id, elf32_nds32_check_relax_group,
elf32_nds32_unify_relax_group, nds32_elf_unify_tls_model):
New prototypes.
(elf32_nds32_compute_jump_table_size, elf32_nds32_local_tlsdesc_gotent):
New macro.
(nds32_insertion_sort, bfd_elf32_nds32_set_target_option,
elf_nds32_link_hash_table): Updated.
* elf32-nds32.c (enum elf_nds32_tls_type): New.
(struct elf32_nds32_relax_group_t, struct relax_group_list_t): New.
(elf32_nds32_add_dynreloc, patch_tls_desc_to_ie, get_tls_type,
fls, ones32, list_insert, list_insert_sibling, dump_chain,
elf32_nds32_check_relax_group, elf32_nds32_lookup_section_id,
elf32_nds32_unify_relax_group, nds32_elf_unify_tls_model): New functions.
(elf_nds32_obj_tdata): Add new fields.
(elf32_nds32_relax_group_ptr, nds32_elf_local_tlsdesc_gotent): New macros.
(nds32_elf_howto_table): Add TLS relocations.
(nds32_reloc_map): Likewise.
(nds32_elf_copy_indirect_symbol, nds32_elf_size_dynamic_sections,
nds32_elf_finish_dynamic_symbol, elf32_nds32_allocate_local_sym_info,
nds32_elf_relocate_section, bfd_elf32_nds32_set_target_option,
nds32_elf_check_relocs, allocate_dynrelocs): Updated.
(nds32_elf_relax_section): Call nds32_elf_unify_tls_model.
(dtpoff_base): Rename it to `gottpof' and then update it.
opcodes * nds32-asm.c (operand_fields): Remove the unused fields.
(nds32_opcodes): Remove the unused instructions.
* nds32-dis.c (nds32_ex9_info): Removed.
(nds32_parse_opcode): Updated.
(print_insn_nds32): Likewise.
* nds32-asm.c (config.h, stdlib.h, string.h): New includes.
(LEX_SET_FIELD, LEX_GET_FIELD): Update defines.
(nds32_asm_init, build_operand_hash_table, build_keyword_hash_table,
build_opcode_hash_table): New functions.
(nds32_keyword_table, nds32_keyword_count_table, nds32_field_table,
nds32_opcode_table): New.
(hw_ktabs): Declare it to a pointer rather than an array.
(build_hash_table): Removed.
* nds32-asm.h (enum): Add SYN_INPUT, SYN_OUTPUT, SYN_LOPT,
SYN_ROPT and upadte HW_GPR and HW_INT.
* nds32-dis.c (keywords): Remove const.
(match_field): New function.
(nds32_parse_opcode): Updated.
* disassemble.c (disassemble_init_for_target):
Add disassemble_init_nds32.
* nds32-dis.c (eum map_type): New.
(nds32_private_data): Likewise.
(get_mapping_symbol_type, is_mapping_symbol, nds32_symbol_is_valid,
nds32_add_opcode_hash_table, disassemble_init_nds32): New functions.
(print_insn_nds32): Updated.
* nds32-asm.c (parse_aext_reg): Add new parameter.
(parse_re, parse_re2, parse_aext_reg): Only reduced registers
are allowed to use.
All callers changed.
* nds32-asm.c (keyword_usr, keyword_sr): Updated.
(operand_fields): Add new fields.
(nds32_opcodes): Add new instructions.
(keyword_aridxi_mx): New keyword.
* nds32-asm.h (enum): Add NASM_ATTR_DSP_ISAEXT, HW_AEXT_ARIDXI_MX
and NASM_ATTR_ZOL.
(ALU2_1, ALU2_2, ALU2_3): New macros.
* nds32-dis.c (nds32_filter_unknown_insn): Updated.
While looking through gdb.log, I found that two tests FAIL like this:
warning: No executable has been specified and target does not support
determining executable automatically. Try using the "file" command.
0x00400dc4 in ?? ()
(gdb) FAIL: gdb.base/attach.exp: attach2, with no file
The other is gdb.base/quit-live.exp. I've implemented the following
patch that fixes both failures, only then detecting that I'd previously
reported the issue as PR tdep/17903.
Tested on amd64-pc-solaris2.10 and amd64-pc-solaris2.11.
PR tdep/17903
* procfs.c (procfs_target): Declare pid_to_exec_file.
(procfs_target::pid_to_exec_file): New.
Currently, three tests FAIL on Solaris 11.4+ (amd64-pc-solaris2.11 and
sparcv9-sun-solaris2.11):
info auxv
[...]
2009 AT_SUN_HWCAP Machine-dependent CPU capability hints 0x3f5ff7
2023 ??? 0x0
0 AT_NULL End of vector 0x0
(gdb) WARNING: Unrecognized tag value: 2023 ??? 0x0
FAIL: gdb.base/auxv.exp: info auxv on live process
info auxv
4294969310 ??? 0x7fffbfffe410
9225589753816 ??? 0x7fffbfffe45c
[...]
WARNING: Unrecognized tag value: 4294969310 ??? 0x7fffbfffe410
WARNING: Unrecognized tag value: 9225589753816 ??? 0x7fffbfffe45c
WARNING: Unrecognized tag value: 140733193388037 ??? 0x6
[...]
2009 AT_SUN_HWCAP Machine-dependent CPU capability hints 0x3f5ff7
2023 ??? 0x0
0 AT_NULL End of vector 0x0
(gdb) WARNING: Unrecognized tag value: 2023 ??? 0x0
UNRESOLVED: gdb.base/auxv.exp: info auxv on native core dump
info auxv
[...]
2009 AT_SUN_HWCAP Machine-dependent CPU capability hints 0x3f5ff7
2023 ??? 0x0
0 AT_NULL End of vector 0x0
(gdb) WARNING: Unrecognized tag value: 2023 ??? 0x0
FAIL: gdb.base/auxv.exp: info auxv on gcore-created dump
The following patch fixes this by introducing the missing AT_SUN_*
values from Solaris 11.4+ <sys/auxv.h>. This lets the live and
gcore-created dump tests PASS.
I don't know yet what's the reason for those weird 'Unrecognized tag
value' warnings with native core dumps is; elfdump -n certainly doesn't
show them. However, native core dumps still need quite some work
(mostly in bfd) in this and other areas.
Tested on amd64-pc-solaris2.11.
gdb:
* auxv.c (default_print_auxv_entry): Reflect AT_SUN_CAP_HW1
renaming.
Handle AT_SUN_EMULATOR, AT_SUN_BRANDNAME, AT_SUN_BRAND_AUX1,
AT_SUN_BRAND_AUX2, AT_SUN_BRAND_AUX3, AT_SUN_CAP_HW2.
include:
* elf/common.h (AT_SUN_HWCAP): Rename to ...
(AT_SUN_CAP_HW1): ... this. Retain old name for backward
compatibility.
(AT_SUN_EMULATOR, AT_SUN_BRANDNAME, AT_SUN_BRAND_AUX1)
(AT_SUN_BRAND_AUX2, AT_SUN_BRAND_AUX3, AT_SUN_CAP_HW2): Define.
I've been carrying around the following patch for some time. I noticed
that both i386-sol2-nat.c and i386-v4-nat.c are Solaris-only now and it
seems confusing to carry both around.
So this patch merges i386-v4-nat.c into i386-sol2-nat.c, simplifying it
in a couple of places, like removing checks for macros that are always
defined.
Tested on 64-bit Solaris 11.5/x86 (amd64-pc-solaris2.11) and 32-bit
Solaris 11.3/x86 (i386-pc-solaris2.11) half a year ago.
* i386-v4-nat.c (regmap, supply_gregset, fill_gregset)
(supply_fpregset, fill_fpregset): Move ...
* i386-sol2-nat.c [PR_MODEL_NATIVE != PR_MODEL_LP64]: ... here.
Remove HAVE_GREGSET_T, HAVE_FPREGET_T guards.
Remove references to ioctl-based procfs.
Include <sys/reg.h>.
Remove PR_MODEL_NATIVE guards.
* configure.nat <sol2, i386> (NATDEPFILES): Remove i386-v4-nat.o.
* Makefile.in (ALLDEPFILES): Remove i386-v4-nat.c.
Fixes the bugs exposed by the testcases in the PR, plus two more bugs
I noticed when looking at _bfd_stab_section_find_nearest_line.
PR 23686
* dwarf2.c (read_section): Error when attempting to malloc
"(bfd_size_type) -1".
* syms.c (_bfd_stab_section_find_nearest_line): Bounds check
function_name. Bounds check reloc address. Formatting. Ensure
.stabstr zero terminated.
On Darwin, debugging an helloworld program with GDB does
not work and ends with:
(gdb) set startup-with-shell off
(gdb) start
Temporary breakpoint 1 at 0x100000fb4: file /tmp/helloworld.c, line 1.
Starting program: /private/tmp/helloworld
[New Thread 0x2703 of process 18906]
[New Thread 0x2603 of process 18906]
[1]+ Stopped ./gdb/gdb /tmp/helloworld
When debugging with lldb, instead of having the STOP signal, we can
see that a breakpoint is not set to a proper location:
Warning:
Cannot insert breakpoint -1.
Cannot access memory at address 0xf726
Command aborted.
The inserted breakpoint is the one used when GDB has to stop the target
when a shared library is loaded or unloaded. The notifier address used
for adding the breakpoint is wrong thus the above failure.
This notifier address is an offset relative to dyld base address, so
the value calculation has to be updated to reflect this.
This was tested on High Sierra by trying to run a simple "hello world"
program.
gdb/ChangeLog:
PR gdb/20981:
* solib-darwin.c (darwin_get_dyld_bfd): New function.
(darwin_solib_get_all_image_info_addr_at_init): Update call.
(darwin_handle_solib_event): New function.
(darwin_solib_create_inferior_hook): Handle unrelocated dyld.
Change-Id: I7dde5008c9158f17b78dc89bd7f4bd8a12d4a6e1
GDB Administrator
Jim Wilson
Jozef Lawrynowicz
Tom Tromey
Sandra Loosemore
Rainer Orth
Jon Turney
Simon Marchi
Alan Modra
Yacov Simhony
H.J. Lu
John Darrington
Hafiz Abid Qadeer
Maciej W. Rozycki
Nick Clifton
Xavier Roirand
John Baldwin