Disp16 and Disp32 aren't supported by direct branches in 64-bit mode.
This patch removes them from 64-bit direct branches.
* opcodes/i386-opc.tbl (call): Remove Disp16|Disp32 from 64-bit
direct branch.
(jmp): Likewise.
* i386-tbl.h: Regenerated.
Mixing target and not-target directives can be used to run for x86_64-*-*
target while skipping x86_64-*-gnux32 target. This patch allows mixing
target and not-target directives. It is used to skip elfedit-1 for
x86_64-*-gnux32.
* binutils-all/elfedit-1.d: Skip x86_64-*-gnux32.
* lib/utils-lib.exp (run_dump_test): Allow mixing target and
not-target directives.
This patch sets the default ELF output format of assembler and linker to
EM_IAMCU when binutils is configured to i?86-*-elfiamcu target.
gas/
* configure.tgt (arch): Set to iamcu for i386-*-elfiamcu target.
* config/tc-i386.c (i386_mach): Support iamcu.
(i386_target_format): Likewise.
ld/
* configure.tgt: Support i[3-7]86-*-elfiamcu target.
ld/testsuite/
* ld-i386/i386.exp (iamcu_tests): Run iamcu-4.
* ld-i386/iamcu-4.d: New file.
binutils/
* elfedit.c (enum elfclass): New.
(input_elf_class): Change type to enum elfclass.
(output_elf_class): New.
(elf_class): Change return type to enum elfclass. Support EM_386
and EM_IAMCU.
(update_elf_header): Check if input and output ELF classes match.
(elf_machine): Support EM_386 and EM_IAMCU.
(main): Update input_elf_class. Set output_elf_class.
* doc/binutils.texi: Update elfedit.
binutils/testsuite/
* binutils-all/elfedit-5.d: New file.
* binutils-all/elfedit.exp: Run elfedit-5.
The first argument to bfd_get_8/bfd_put_8 isn't used. But we should
use something real. Replace input_bfd and output_bfd with abfd.
* elf32-i386.c (elf_i386_convert_mov_to_lea): Replace input_bfd
and output_bfd with abfd.
* elf64-x86-64.c (elf_x86_64_convert_mov_to_lea): Likewise.
2015-05-08 Yao Qi <yao@codesourcery.com>
Sandra Loosemore <sandra@codesourcery.com>
gdb/
* dwarf2read.c (setup_type_unit_groups): Do NULL pointer check
to 'lh->include_dirs' before accessing to it.
(psymtab_include_file_name): Likewise.
(dwarf_decode_lines_1): Likewise.
(dwarf_decode_lines): Likewise.
(file_file_name): Likewise.
2015-05-08 Sandra Loosemore <sandra@codesourcery.com>
gdb/gdbserver/
* linux-nios2-low.c: Include elf/common.h. Adjust comments.
Remove HAVE_PTRACE_GETREGS conditionals.
(nios2_regsets): Use PTRACE_GETREGSET and PTRACE_SETREGSET
instead of PTRACE_GETREGS and PTRACE_SETREGS.
2015-05-08 Sandra Loosemore <sandra@codesourcery.com>
gdb/
* nios2-tdep.c (nios2_breakpoint_from_pc): Revert to using
"trap 31" as the breakpoint instruction on all targets.
In my last commit to make gdb.base/coredump-filter.exp be more robust
regarding using arrays in the global namespace, I cleared the
"coredump_var_addr" array like this:
set coredump_var_addr ""
# use coredump_var_addr as an array...
This causes DejaGNU to complain because the variable is first set as
non-array, and the used as an array. The correct way to do this is to
unset the variable using:
unset -nocomplain coredump_var_addr
# use coredump_var_addr as an array...
The "-nocomplain" part is necessary because if the variable doesn't
exist "unset" will not error.
Tested on Fedora 20 x86_64.
gdb/testsuite/ChangeLog:
2015-05-08 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/coredump-filter.exp: Correctly unset
"coredump_var_addr" array.
Attempting to build libiberty on LynxOS-178 fails trying to compile
mkstemps.c with the following error:
mkstemps.c:84:18: error: storage size of 'tv' isn't known
struct timeval tv;
^
This file would normally include <sys/time.h> to get the type's
definition, but unfortunately LynxOS-178 does not want us to use
<sys/time.h>, only <time.h>. The configure script correctly finds
this out and generates a config.h file where HAVE_SYS_TIME_H is
undefined:
/* Define to 1 if you have the <sys/time.h> header file. */
/* #undef HAVE_SYS_TIME_H */
This patch fixes the build issue by falling back on including <time.h>
if <sys/time.h> could not be included (and provided that HAVE_TIME_H
is defined, of course).
libiberty/ChangeLog:
* mkstemps.c: #include <time.h> if HAVE_TIME_H is defined
but not HAVE_SYS_TIME_H.
Sequential test runs are stopping prematurely like this:
$ make check RUNTESTFLAGS="non-existing-program.exp server-exec-info.exp"
Running /home/pedro/gdb/mygit/src/gdb/testsuite/gdb.server/non-existing-program.exp ...
Running /home/pedro/gdb/mygit/src/gdb/testsuite/gdb.server/server-exec-info.exp ...
can not find channel named "exp6"
while executing
"match_max [match_max -d]"
(procedure "default_gdb_init" line 26)
invoked from within
"default_gdb_init $test_file_name"
(procedure "gdb_init" line 83)
invoked from within
"${tool}_init $test_file_name"
(procedure "runtest" line 18)
invoked from within
"runtest $test_name"
("foreach" body line 42)
invoked from within
...
make[2]: *** [check-single] Error 1
make[2]: Leaving directory `/home/pedro/gdb/mygit/build/gdb/testsuite'
make[1]: *** [check] Error 2
make[1]: Leaving directory `/home/pedro/gdb/mygit/build/gdb/testsuite'
make: *** [check] Error 2
default_gdb_init has this:
# Unlike most tests, we have a small number of tests that generate
# a very large amount of output. We therefore increase the expect
# buffer size to be able to contain the entire test output. This
# is especially needed by gdb.base/info-macros.exp.
match_max -d 65536
# Also set this value for the currently running GDB.
match_max [match_max -d]
It's the second match_max that is erroring. As that call does not
specify an explicit channel name with -i, expect defaults to
$spawn_id, which is pointing at a channel that is already gone. (If
the spawn_id variable is not set, match_max defaults to
$user_spawn_id / stdin/out).
gdb/testsuite/ChangeLog:
2015-05-08 Pedro Alves <palves@redhat.com>
* gdb.server/non-existing-program.exp: Unset spawn_id.
PR gas/18347
* config/tc-arm.h (TC_EQUAL_IN_INSN): Define.
* config/tc-arm.c (arm_tc_equal_in_insn): New function. Move
the symbol name checking code to here from...
(md_undefined_symbo): ... here.
Consider the following declarations...
type Obj_T (Selected_Flights_Length : Natural) is
record
Selected_Flights : Flights.List.T (1 .. Selected_Flights_Length);
end record;
Broken : Obj_T;
... which defines a variable named "broken" which is a discrimated
record where broken.Selected_Flights is an array whose upper bound
is stored in the record's Selected_Flights_Length component.
Trying to print the value of that object currently fails:
(gdb) print broken
cannot find reference address for offset property
Looking at the debugging info, we see that variable "Broken" is
a reference...
<1><8e3>: Abbrev Number: 21 (DW_TAG_const_type)
<8e4> DW_AT_type : <0x8e8>
<1><8e8>: Abbrev Number: 22 (DW_TAG_reference_type)
<8e9> DW_AT_byte_size : 8
<8ea> DW_AT_type : <0x7ec>
... to ...
<1><7ec>: Abbrev Number: 12 (DW_TAG_structure_type)
<7ed> DW_AT_name : (indirect string, offset: 0xc6d): reprod__obj_t
<7f1> DW_AT_decl_file : 2
<7f2> DW_AT_decl_line : 15
<7f3> DW_AT_GNAT_descriptive_type: <0x87e>
<7f7> DW_AT_sibling : <0x87e>
... which has 2 members, the first one being the discriminant...
<2><7fb>: Abbrev Number: 9 (DW_TAG_member)
<7fc> DW_AT_name : (indirect string, offset: 0xc98): selected_flights_length
<800> DW_AT_decl_file : 2
<801> DW_AT_decl_line : 15
<802> DW_AT_type : <0x807>
<806> DW_AT_data_member_location: 0
... and the second one being the one that causes trouble...
<2><83d>: Abbrev Number: 9 (DW_TAG_member)
<83e> DW_AT_name : (indirect string, offset: 0xd17): selected_flights
<842> DW_AT_decl_file : 2
<843> DW_AT_decl_line : 17
<844> DW_AT_type : <0x815>
<848> DW_AT_data_member_location: 4
The second field's type is an array....
<2><815>: Abbrev Number: 14 (DW_TAG_array_type)
<816> DW_AT_name : (indirect string, offset: 0xd2f): reprod__obj_t__T5sP
<81a> DW_AT_GNAT_descriptive_type: <0x7e1>
<81e> DW_AT_type : <0x748>
<822> DW_AT_sibling : <0x830>
... whose uppper bound is a reference to <0x7fb>...
<3><826>: Abbrev Number: 15 (DW_TAG_subrange_type)
<827> DW_AT_type : <0x830>
<82b> DW_AT_upper_bound : <0x7fb>
<3><82f>: Abbrev Number: 0
Because the upper bound is dynamic, we try to resolve it.
As it happens, the upper-bound resolution for this range type
works fine. What breaks is when we try to resolve this range
type's target type, which is:
<2><830>: Abbrev Number: 16 (DW_TAG_subrange_type)
<831> DW_AT_upper_bound : <0x7fb>
<835> DW_AT_name : (indirect string, offset: 0xc7b): reprod__obj_t__T4s___XDLU_1__selected_flights_length
<839> DW_AT_type : <0x766>
<83d> DW_AT_artificial : 1
It is actually pretty much the same as the first subrange type,
so you might ask why this is causing trouble, when the resolution
of the previous DIE worked like a charm???
Well, for that, we need to backtrack a bit, and notice that, ahead
of the DW_TAG_structure_type's DIE, there is the following DIE:
<1><7e1>: Abbrev Number: 6 (DW_TAG_typedef)
<7e2> DW_AT_name : (indirect string, offset: 0xbae): reprod__obj_t__T5s
<7e6> DW_AT_decl_file : 2
<7e7> DW_AT_decl_line : 17
<7e8> DW_AT_type : <0x849>
... and that DIE references an array type...
<2><849>: Abbrev Number: 14 (DW_TAG_array_type)
<84a> DW_AT_name : (indirect string, offset: 0xbae): reprod__obj_t__T5s
<84e> DW_AT_GNAT_descriptive_type: <0x864>
<852> DW_AT_type : <0x748>
<856> DW_AT_sibling : <0x864>
... whose subrange is...
<3><85a>: Abbrev Number: 15 (DW_TAG_subrange_type)
<85b> DW_AT_type : <0x830>
<85f> DW_AT_upper_bound : <0x7fb>
... where the subrange's base type is the DW_TAG_subrange_type DIE
that is causing problem.
In summary, we process the typedef first, which causes us to process
the second subrange BEFORE we process the struct DIE itself, and
therefore the struct's discriminent (DW_TAG_member #1). As a result,
while trying to handle the reference to that DW_TAG_member #1 as
the upper bound of the second range type, we do...
case DW_AT_data_member_location:
{
[...]
baton->referenced_type = get_die_type (target_die->parent,
target_cu);
... where target_die->parent (DW_TAG_member #1) hasn't been processed
yet, and thus get_die_type returns NULL.
This is what later causes us problems trying to find the right address
to use as the base address for our field, which then triggers the
error message we are seeing.
This patch fixes the issue by calling read_type_die instead of
get_die_type. If the DIE has already been processed, then this
is the same as get_die_type. If not, the it'll get the parent
die to be read, and then get its type.
gdb/ChangeLog:
* dwarf2read.c (attr_to_dynamic_prop)
<DW_AT_data_member_location>: Use read_type_die isntead of
get_die_type.
Tested on x86_64-linux, no regression.
No testcase, unfortunately, as the reproducer was given to us by
a customer, and it's been otherwise surprisingly difficult to
reproduce the same error outside of that reproducer.
We observed on x86-windows that trying to call a function from
GDB leads to a mysterious "Invalid cast" error. This can be
observed in gdb.ada/float_param.exp:
(gdb) call set_long_double(1, global_small_struct, 4.0)
Invalid cast.
This happens because the 3rd parameter, a Long_Long_Float, is
actually passed wrapped inside a PAD structure. As documented
in GNAT's exp_dbug.ads, PAD types are simple wrappers that GNAT
uses to handle types with size or alignment constraints.
We already support those when printing an object encapsulated
in a PAD type, but not when trying to pass an argument that
is wrapped inside a PAD type. As a result, what happens is that
call_function_by_hand ends up with an argument with a type
that looks incompatible with the expected type of the argument.
The error comes when trying to push the arguments in inferior
memory, while trying to coerce each one of them to their expected
types (in value_arg_coerce).
Note that the problem is not specific to Windows, but so far, this is
the only platform where we've seen this happen.
gdb/ChangeLog:
* ada-lang.c (ada_convert_actual): Add handling of formals
passed inside an aligner type.
Tested on x86-windows (AdaCore testsuite) and x86_64-linux (official
testsuite as well as AdaCore's testsuite).
Now that the erc32 files have been updated to contain an FSF copyright
header, these files should no longer be in the exclude list.
gdb/ChangeLog:
* copyright.py (NOT_FSF_LIST): Remove sim/erc32 entries.
On ELF target, the assembler normally generates code which can go into a
shared library where non-weak symbols can be preempted. The -mno-shared
option tells the assembler to generate code not for a shared library,
where non-weak symbols won't be preempted. The resulting code is slightly
smaller. This option mainly affects the handling of branch instructions.
gas/
* config/tc-i386.c (no_shared): New.
(OPTION_MNO_SHARED): Likewise.
(elf_symbol_resolved_in_segment_p): Check no_shared.
(md_longopts): Add mno-shared.
(md_parse_option): Handle OPTION_MNO_SHARED.
(md_show_usage): Add -mno-shared.
* doc/c-i386.texi: Document -mno-shared.
gas/testsuite/
* gas/i386/i386.exp: Run relax-4 and x86-64-relax-3.
* gas/i386/relax-4.d: New file.
* gas/i386/x86-64-relax-3.d: Likewise.
Hi,
We see some fails in gdb.base/coredump-filter.exp when we do remote
gdbserver testing, like what I did for arm/aarch64 linux testing or
run it with board file remote-gdbserver-on-localhost
$ make check RUNTESTFLAGS='--target_board=remote-gdbserver-on-localhost coredump-filter.exp'
we find that this line in the test doesn't work as expected,
remote_exec target "sh -c \"echo $filter_flag > /proc/$ipid/coredump_filter\""
although such pattern has been used in gdb testsuite somewhere else,
but the special thing here is that we redirect the output to
/proc/$ipid/coredump_filter on the remote target. DejaGNU will
redirect the output from the remote target to local, and looks tcl
gets confused by these two redirection.
After trying pass different parameters to remote_exec and hacking
remote_exec/rsh_exec/local_exec, I got no success, I decide
to give up, and try to update /proc/$ipid/coredump_filter by the c
code directly.
This patch adds a c function set_coredump_filter to update
coredump_filter, and GDB calls it.
gdb/testsuite:
2015-05-08 Yao Qi <yao.qi@linaro.org>
PR gdb/18208
* gdb.base/coredump-filter.c (set_coredump_filter): New function.
* gdb.base/coredump-filter.exp (do_save_core): Call inferior
function set_coredump_filter, and remove remote_exec call.
Remove argument ipid. Callers update.
(top level): Don't get inferior's PID.
GDBserver steps over breakpoint if the condition is false, but if target
doesn't support hardware single step, the step over is very simple, if
not incorrect, in linux-arm-low.c:
/* We only place breakpoints in empty marker functions, and thread locking
is outside of the function. So rather than importing software single-step,
we can just run until exit. */
static CORE_ADDR
arm_reinsert_addr (void)
{
struct regcache *regcache = get_thread_regcache (current_thread, 1);
unsigned long pc;
collect_register_by_name (regcache, "lr", &pc);
return pc;
}
and linux-mips-low.c does the same. GDBserver sets a breakpoint at the
return address of the current function, resume and wait the program hits
the breakpoint in order to achieve "breakpoint step over". What if
program hits other user breakponits during this "step over"?
It is worse if the arm/thumb interworking is considered. Nowadays,
GDBserver arm backend unconditionally inserts arm breakpoint,
/* Define an ARM-mode breakpoint; we only set breakpoints in the C
library, which is most likely to be ARM. If the kernel supports
clone events, we will never insert a breakpoint, so even a Thumb
C library will work; so will mixing EABI/non-EABI gdbserver and
application. */
(const unsigned char *) &arm_breakpoint,
(const unsigned char *) &arm_eabi_breakpoint,
note that the comments are no longer valid as C library can be compiled
in thumb mode.
When GDBserver steps over a breakpoint in arm mode function, which
returns to thumb mode, GDBserver will insert arm mode breakpoint by
mistake and the program will crash. GDBserver alone is unable to
determine the arm/thumb mode given a PC address. See how GDB does
it in arm-tdep.c:arm_pc_is_thumb.
After thinking about how to teach GDBserver inserting right breakpoint
(arm or thumb) for a while, I reconsider it from a different direction
that it may be unreasonable to run target-side conditional breakpoint for
targets without hardware single step. Pedro also pointed this out here
https://sourceware.org/ml/gdb-patches/2015-04/msg00337.html
This patch is to add a new target_ops hook
supports_conditional_breakpoints, and only reply
";ConditionalBreakpoints+" if it is true. On linux targets,
supports_conditional_breakpoints returns true if target has hardware
single step, on other targets, (win32, lynx, nto, spu), set it to NULL,
because conditional breakpoint is a linux-specific feature.
gdb/gdbserver:
2015-05-08 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_supports_conditional_breakpoints): New
function.
(linux_target_ops): Install new target method.
* lynx-low.c (lynx_target_ops): Install NULL hook for
supports_conditional_breakpoints.
* nto-low.c (nto_target_ops): Likewise.
* spu-low.c (spu_target_ops): Likewise.
* win32-low.c (win32_target_ops): Likewise.
* server.c (handle_query): Check
target_supports_conditional_breakpoints.
* target.h (struct target_ops) <supports_conditional_breakpoints>:
New field.
(target_supports_conditional_breakpoints): New macro.
On 64-bit S390 platforms, for programs compiled with -m31, it could
happen that GDB inadvertently cleared the inferior's 31-bit addressing
mode bit and left the inferior running in 24-bit addressing mode. In
particular this occurred with checkpoint.exp, when the "restore"
command needed to create a new regcache copy: At the time when the
PSWM register was copied over, the addressing mode bit was taken from
the PSWA register, which was still zero since it had not been copied
yet. And when the PSWA register was copied, the addressing mode was
not updated again.
The fix affects fill_gregset, where the bits "belonging" to each of
the PSWA and PSWM registers are now carefully separated. The
addressing mode bit is no longer touched when writing PSWM, and --
more importantly -- it *is* written when writing PSWA.
gdb/ChangeLog:
* s390-linux-nat.c (fill_gregset): Avoid relying on the PSWA
register in the regcache when treating the PSWM register, and vice
versa.
Since watch_thread_num.exp was changed to use access watchpoints, the
test case fails on s390 and s390x, since those targets do not support
access watchpoints. This patch skips the test case on such targets.
gdb/testsuite/ChangeLog:
* gdb.base/watch_thread_num.exp: Skip test on targets without
access watchpoints.
Branches to global non-weak symbols defined in the same segment with
non-default visibility can be optimized the same way as branches to
local symbols.
gas/
* config/tc-i386.c (elf_symbol_resolved_in_segment_p): New.
(md_estimate_size_before_relax): Use it.
gas/testsuite/
* gas/i386/i386.exp: Run relax-3 and x86-64-relax-2.
* gas/i386/relax-3.d: New file.
* gas/i386/relax-3.s: Likewise.
* gas/i386/x86-64-relax-2.d: Likewise.
linux-thread-db.c initializes td_ta_map_id2thr but never uses it.
This commit removes this dead code.
gdb/ChangeLog:
* linux-thread-db.c (struct thread_db_info)
<td_ta_map_id2thr_p>: Remove field.
(try_thread_db_load_1): Remove initialization for the above.
linux-thread-db.c initializes td_thr_validate but never uses it.
This commit removes this dead code.
gdb/ChangeLog:
* linux-thread-db.c (struct thread_db_info)
<td_thr_validate_p>: Remove field.
(try_thread_db_load_1): Remove initialization for the above.
Calling memcpy() could fail as memcpy() from libc is GNU-IFUNC.
gdb/ChangeLog
2015-05-06 Jan Kratochvil <jan.kratochvil@redhat.com>
* compile/compile-object-load.c (compile_object_load): Support
mst_text_gnu_ifunc.
gdb/ChangeLog
2015-05-06 Jan Kratochvil <jan.kratochvil@redhat.com>
* compile/compile.c (compile_to_object): Make the cmd_string parameter
const. Use new variables for the const compatibility.
(eval_compile_command): Make the cmd_string parameter const.
* compile/compile.h (eval_compile_command): Make the cmd_string
parameter const.
$ ./gdbserver :1234 blah
Process blah created; pid = 16471
Cannot exec blah: No such file or directory.
Child exited with status 127
Killing process(es): 16471
../../../../src/binutils-gdb/gdb/gdbserver/linux-low.c:920: A problem internal to GDBserver has been detected.
kill_wait_lwp: Assertion `res > 0' failed.
GDBserver shouldn't even be trying to kill that process. GDBserver
kills or detaches from all processes on exit, and due to a missing
mourn_inferior call, GDBserver tries to kill the process that it had
already seen exit.
Tested on x86_64 Fedora 20. New test included. I emulated what
Windows outputs by hacking an error call in linux_create_inferior.
gdb/gdbserver/ChangeLog:
2015-05-06 Pedro Alves <palves@redhat.com>
PR server/18081
* server.c (start_inferior): If the process exits, mourn it.
gdb/testsuite/ChangeLog:
2015-05-06 Pedro Alves <palves@redhat.com>
PR server/18081
* gdb.server/non-existing-program.exp: New file.
This hook is no longer used, and can therefore be eliminated.
gdb/ChangeLog:
* defs.h (deprecated_init_ui_hook): Delete. Remove associated
comment.
* top.c (deprecated_init_ui_hook): Delete.
(gdb_init): Remove handling of deprecated_init_ui_hook.
* interps.c (clear_interpreter_hooks): Remove handling of
deprecated_init_ui_hook.
* main.c (captured_main): Update comment.
The "info dll", an alias of the "info sharedlibrary" command, is
currently only defined in windows native versions. This patch makes
it universally available by moving the alias declaration to solib.c,
and adjusts the documentation accordingly.
Making it universally available has two benefits:
- Windows users moving to a Unix platforms are still able to use
the same command for getting the list of shared libraries;
- Unix to Windows cross debuggers now provide that command also.
gdb/ChangeLog:
* solib.c (_initialize_solib): Add "info dll" alias creation.
* windows-nat.c (set_windows_aliases): Delete.
(_initialize_windows_nat): Remove deprecated_init_ui_hook
assignment.
* NEWS: Add news entry about "info dll" now being available
on all platforms.
gdb/doc/ChangeLog:
* gdb.texinfo (Files): Add "info dll" documentation.
(Cygwin Native): Remove "info dll" documentation.
gas/ChangeLog:
2015-05-06 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c (sparc_ip): Support the %ncc "natural"
condition codes
* doc/c-sparc.texi (Sparc-Regs): Document %ncc.
gas/testsuite/ChangeLog:
2015-05-06 Jose E. Marchesi <jose.marchesi@oracle.com>
* gas/sparc/natural.s: New file.
* gas/sparc/natural-32.s: Likewise.
* gas/sparc/natural.d: Likewise.
* gas/sparc/natural-32.d: Likewise.
* gas/sparc/sparc.exp (sparc_elf_setup): Run the tests natural and
natural-32.
GDB Administrator
H.J. Lu
Siva Chandra
Sandra Loosemore
Sergio Durigan Junior
Joel Brobecker
Pedro Alves
Nick Clifton
Jan Kratochvil
Yao Qi
Andreas Arnez
Gary Benson
Jose E. Marchesi
Toni Spets