Since every target typedefs this the same way, move it to the common code.
We have to leave Blackfin behind here for now because of inter-dependencies
on types and headers: sim-base.h includes sim-model.h which needs types in
machs.h which needs types in bfim-sim.h which needs SIM_CPU.
Almost every target defines sim_cia the same way -- either using the
address_word type directly, or a type of equivalent size. The only
odd one out is sh64 (who has 32bit address_word and 64bit cia), and
even that case doesn't seem to make sense. We'll put off clean up
though of sh64 and at least set up a sensible default for everyone.
The CIA_{GET,SET} macros serve the same function as CPU_PC_{GET,SET}
except the latter adds a layer of indirection via the sim state. This
lets models set up different functions at runtime and doesn't reach so
directly into the arch-specific cpu state.
It also doesn't make sense to have two sets of macros that do exactly
the same thing, so lets standardize on the one that gets us more.
Now that all the targets are utilizing CPU_PC_{FETCH,STORE}, and the
cpu state is multicore, and the STATE_CPU defines match, we can move
it all to the common code.
With sim-hrw.o being built & linked in the common list, some people are
getting linking errors now for these targets. Move the main objects that
provide these functions before the common list to avoid that.
Now that all targets have been converted to nrun, we can finally punt
this old inconsistent interface.
A few stray references to the old run were sprinkled about; clean them
up in the process.
We leave behind the run(1) man page mostly so that we get it updated for
the new nrun interface.
The previous profile change broke these sims that use sim-profile but
not sim-cpu (due to missing model support). Add simple funcs until we
can convert these over properly.
The current default handling for the --enable-sim-hardware option ends up
forcing the value to whatever is set as the first argument when calling
the macro (by virtue of how autoconf works). Relocate the setup code to
the 4th parameter of the AC_ARG_ENABLE macro to fix it.
This was caused by the simplification work in 1517bd2742.
Reported-by: Hans-Peter Nilsson <hans-peter.nilsson@axis.com>
Since no sim is using the "always" option to SIM_AC_OPTION_HARDWARE, and
we don't want to require hw support to always be enabled, drop the option.
This leads to a slight simplification in the macro too as we can collapse
the sim_hw_p variable.
If dv-sockser is available, lets add it to the common SIM_HW_OBJS
variable so it is always included automatically. Now ports do not
have to shoe horn it in directly themselves. It does mean it will
be compiled for targets that don't explicitly use it, but that's
really what we want anyways.
This lets ports assume that the dv-sockser API is always available if
they want to. This way we don't have to do an abort at configure time
and it makes the resulting code a bit simpler.
Rather than manually include tconfig.h when we think we'll need it (which
is error prone as it can define symbols we expect from config.h), have it
be included directly by config.h. Since we know we have to include that
header everywhere already, this will make sure tconfig.h isn't missed.
It should also be fine as tconfig.h is supposed to be simple and only set
up a few core defines for the target.
This allows us to stop symlinking it in place all the time and just use
it straight out of the respective source directory.
Pull out the duplicated dv_sockser_install prototype from the tconfig.in
files and put it in the one place it gets used -- sim-module.c. This is
still arguably incorrect, but it's better than the status quo where the
tconfig.in has to include header files and duplicate the dv-sockser func.
The tconfig header is meant to be simple and contain a target defines.
We want people to stop using the run.c frontend, but it's hard to notice
when it's still set as the default. Lets flip things so nrun.c is the
default, and users of run.c will get an error by default. We turn that
error into a warning for existing sims so we don't break them -- this is
mostly meant for people starting new ports.
Directories that don't use libtool need to add -ldl (on most *nix
hosts) to provide dlopen for libbfd.
config/
* plugins.m4 (AC_PLUGINS): If plugins are enabled, add -ldl to
LIBS via AC_SEARCH_LIBS.
gdb/
* acinclude.m4 (GDB_AC_CHECK_BFD): Don't add -ldl.
* config.in: Regenerate.
sim/ppc/
* configure.ac: Invoke AC_PLUGINS.
* config.in: Regenerate.
and regen lots of configure files.
This removes the last uses of PARAMS from sim.
2014-01-06 Tom Tromey <tromey@redhat.com>
* README-HACKING: Don't use PARAMS.
* arm/wrapper.c: Don't use PARAMS.
* bfin/sim-main.h: Don't use PARAMS.
* common/callback.c: Don't use PARAMS.
* common/cgen-trace.c: Don't use PARAMS.
* common/run-sim.h: Don't use PARAMS.
* common/run.c: Don't use PARAMS.
* common/sim-base.h: Don't use PARAMS.
* common/sim-load.c: Don't use PARAMS.
* common/sim-options.h: Don't use PARAMS.
* common/sim-trace.c: Don't use PARAMS.
* common/sim-trace.h: Don't use PARAMS.
* common/sim-utils.h: Don't use PARAMS.
* cr16/cr16_sim.h: Don't use PARAMS.
* cr16/gencode.c: Don't use PARAMS.
* cr16/interp.c: Don't use PARAMS.
* cr16/simops.c: Don't use PARAMS.
* d10v/d10v_sim.h: Don't use PARAMS.
* d10v/gencode.c: Don't use PARAMS.
* d10v/interp.c: Don't use PARAMS.
* d10v/simops.c: Don't use PARAMS.
* erc32/erc32.c: Don't use PARAMS.
* erc32/exec.c: Don't use PARAMS.
* erc32/float.c: Don't use PARAMS.
* erc32/func.c: Don't use PARAMS.
* erc32/sis.c: Don't use PARAMS.
* erc32/sis.h: Don't use PARAMS.
* mips/interp.c: Don't use PARAMS.
* mips/sim-main.h: Don't use PARAMS.
* sh/interp.c: Don't use PARAMS.
* v850/sim-main.h: Don't use PARAMS.
* v850/v850_sim.h: Don't use PARAMS.
I noticed the sim code is using an old implementation of the maintainer logic.
I cut it over to the new macro (like gdb has been doing). In practice, it
makes no difference currently as nothing in the sim tree uses it, but I have a
follow up commit for the Blackfin tree that needs it.
There's no need to put the majority of the logic into the 3rd arg of the
AC_ARG_ENABLE. Coupled with the lack of indentation, it makes it hard to
follow, error prone to update, and duplicates code (with the 4th arg).
So pull the logic out of the 3rd arg and outside of the AC_ARG_ENABLE
macro. This allows us to gut the 4th arg entirely, merge with the code
that followed the macro, and fix bugs related to the new dv-sockser in
the process.
Hopefully building the various sims with the default sim-hardware
settings, as well as with explicit --{dis,en}able-sim-hardware flags,
should all just work now.
* configure.ac: Address use of dv-sockser.o.
* tconfig.in: Conditionalize use of dv_sockser_install.
* configure: Regenerated.
* config.in: Regenerated.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
* wrapper.c: Include config.h before system header files.
* callback.c: Include config.h before system header files.
* cgen-trace.c: Likewise.
* cgen-utils.c: Likewise.
* gentmap.c: Likewise.
* sim-if.c: Include config.h before system header files.
* compile.c: Include config.h before system header files.
* sim-main.h: Likewise.
* gdb-if.c: Include config.h before system header files.
* load.c: Likewise.
* syscalls.c: Likewise.
* trace.c: Likewise.
* interp.c: Include config.h before system header files.
Before POSIX standardized strsignal(), old systems would hide the
prototype unless the normal extension defines were enabled. So use
the AC_USE_SYSTEM_EXTENSIONS helper for that.
Then make sure we include string.h ourselves in nrun.c rather than
relying on implicit includes via other sim headers.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Lift the code that GDB is using to generate dependencies on the fly and
port it over to the sim. Now people shouldn't have to manually maintain
these in their Makefile's.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Automake likes to dump macros automatically used into the aclocal.m4
file, but the common/aclocal.m4 naming prevents that. So rename it
to the more normal "acinclude.m4" so the aclocal tool can work.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Now that the sourceware tree generally requires autoconf-2.64, update
the sim tree to require that too.
This allows us to drop the long standing SIM_AC_COMMON/common.m4
workaround as autoconf 2.64+ seems to work for me.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Since sim_do_command for many people simply calls sim_args_command, start
a unified version of it. For people who handle their own options, they
could switch to this by using sim_add_option_table instead.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The sim keeps track of which allocations are zero-ed internally (via
zalloc) and then calls a helper "zfree" function rather than "free".
But this "zfree" function simply calls "free" itself. Since I can
see no point in this and it is simply useless overhead, punt it.
The only real change is in hw-alloc.c where we remove the zalloc_p
tracking, and sim-utils.c where zfree is delete. The rest of the
changes are a simple `sed` from "zfree" to "free".
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
As pointed out by Sandra Loosemore, a bunch of targets define sim_write
themselves instead of using the common/ code. So constify them too.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* cris/configure: Regenerate.
sim/common:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* aclocal.m4: Include ../../config/acx.m4.
* common.m4: Use ACX_PKGVERSION and ACX_BUGURL.
* configure, config.in: Regenerate.
* Make-common.in (LIB_OBJS): Add version.o.
(version.c, version.o): New rules.
* run.c: Include version.h.
(usage): Add help parameter. Print output either to stdout or
stderr depending on that parameter.
(print_version): New.
(main): Check for --help and --version.
* run-sim.h (sim_target_display_usage): Add help parameter.
* version.h: New.
sim/arm:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
* wrapper.c (sim_target_display_usage): Add help parameter.
sim/cr16:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/d10v:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/erc32:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/frv:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/h8300:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/iq2000:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/m32c:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/m32r:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/m68hc11:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/mcore:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/mips:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/mn10300:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/ppc:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure.ac: Use ACX_PKGVERSION and ACX_BUGURL.
* configure, config.in: Regenerated.
* Makefile.in (LIB_OBJ): Add version.o.
(version.c, version.o): New rules.
* psim.c (psim_usage): Add help parameter. Print the bug URL.
Exit with code 0 for help.
(psim_options): Update calls to psim_usage. Handle --help and
--version.
* psim.h (psim_usage): Update prototype.
* main.c (main): Update psim_usage call.
sim/sh:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/sh64:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/v850:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
* mips.igen (check_fmt_p): Provide a separate mips32r2 definition
that unconditionally allows fmt_ps.
(ALNV.PS, CEIL.L.fmt, CVT.L.fmt, CVT.PS.S, CVT.S.PL, CVT.S.PU)
(FLOOR.L.fmt, LWXC1, MADD.fmt, MSUB.fmt, NMADD.fmt, NMSUB.fmt)
(PLL.PS, PLU.PS, PUL.PS, PUU.PS, ROUND.L.fmt, TRUNC.L.fmt): Change
filter from 64,f to 32,f.
(PREFX): Change filter from 64 to 32.
(LDXC1, LUXC1): Provide separate mips32r2 implementations
that use do_load_double instead of do_load. Make both LUXC1
versions unpredictable if SizeFGR () != 64.
(SDXC1, SUXC1): Extend to mips32r2, using do_store_double
instead of do_store. Remove unused variable. Make both SUXC1
versions unpredictable if SizeFGR () != 64.
(display_mem_info): New static variable.
(mips_option_handler): Handle OPTION_INFO_MEMORY.
(mips_options): Add info-memory and memory-info.
(sim_open): After processing the command line and board specification, check display_mem_info.
If it is set then call the real handler for the --memory-info command line switch.
* configure.ac (sim_mipsisa3264_configs): New variable.
(mipsis32*-*-, mipsisa32r2*-*-*, mips64*-*-*, mips64r2*-*-*): Make
every configuration support all four targets, using the triplet to
determine the default.
* configure: Regenerate.
* config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
(macro_build): Add case '2'.
(macro): Expand M_BALIGN to nop, packrl.ph or balign.
(validate_mips_insn): Add support for balign instruction.
(mips_ip): Handle DSP R2 instructions. Support balign instruction.
(OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
command line options.
(s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
(md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
* doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
.set dspr2, .set nodspr2.
[ gas/testsuite/ChangeLog ]
* gas/mips/mips32-dspr2.s, gas/mips/mips32-dspr2.d: New test for
DSP R2.
* gas/mips/mips.exp: Run new test.
[ include/opcode/Changelog ]
* mips.h (OP_SH_BP, OP_MASK_BP): Add support for balign instruction.
(INSN_DSPR2): Add flag for DSP R2 instructions.
(M_BALIGN): New macro.
[ opcodes/ChangeLog ]
* mips-dis.c (mips_arch_choices): Add DSP R2 support.
(print_insn_args): Add support for balign instruction.
* mips-opc.c (D33): New shortcut for DSP R2 instructions.
(mips_builtin_opcodes): Add DSP R2 instructions.
[ sim/mips/ChangeLog ]
* Makefile.in (IGEN_INCLUDE): Add dsp2.igen.
* configure.ac (mips*-sde-elf*, mipsisa32r2*-*-*, mipsisa64r2*-*-*):
Add dsp2 to sim_igen_machine.
* configure: Regenerate.
* dsp.igen (do_ph_op): Add MUL support when op = 2.
(do_ph_mulq): New function to support mulq_rs.ph and mulq_s.ph.
(mulq_rs.ph): Use do_ph_mulq.
(MFHI, MFLO, MTHI, MTLO): Move these instructions to mips.igen.
* mips.igen: Add dsp2 model and include dsp2.igen.
(MFHI, MFLO, MTHI, MTLO): Extend these instructions for
for *mips32r2, *mips64r2, *dsp.
(MADD, MADDU, MSUB, MSUBU, MULT, MULTU): Extend these instructions
for *mips32r2, *mips64r2, *dsp2.
* dsp2.igen: New file for MIPS DSP REV 2 ASE.
[ sim/testsuite/sim/mips/ChangeLog ]
* basic.exp: Run the dsp2 test.
* utils-dsp.inc (dspckacc_astio, dspck_tsimm): New macro.
* mips32-dsp2.s: New test.
uninterpreted formats. If fmt is one of the uninterpreted types
don't update the FPR_STATE. Handle fmt_uninterpreted_32 like
fmt_word, and fmt_uninterpreted_64 like fmt_long.
(store_fpr): When writing an invalid odd register, set the
matching even register to fmt_unknown, not the following register.
* interp.c (sim_open): If STATE_MEM_SIZE isn't set then set it to
the the memory window at offset 0 set by --memory-size command
line option.
(sim_store_register): Handle storing 4 bytes to an 8 byte floating
point register.
(sim_fetch_register): Likewise for reading 4 bytes from an 8 byte
register.
(sim_monitor): When returning the memory size to the MIPS
application, use the value in STATE_MEM_SIZE, not an arbitrary
hardcoded value.
(cop_lw): Don' mess around with FPR_STATE, just pass
fmt_uninterpreted_32 to StoreFPR.
(cop_sw): Similarly.
(cop_ld): Pass fmt_uninterpreted_64 not fmt_uninterpreted.
(cop_sd): Similarly.
* mips.igen (not_word_value): Single version for mips32, mips64
and mips16.
