2016-12-19 Sandra Loosemore <sandra@codesourcery.com>
gcc/
* doc/cpp.texi: Clean up anachronistic C99 references and remove
discussion of very old GCC versions.
(Differences from previous versions): Delete entire section.
From-SVN: r243810
Remove support for _cgo_allocate. It was removed from the gc
toolchain in Go 1.5, so it is unlikely that anybody is trying to use it.
Reviewed-on: https://go-review.googlesource.com/34557
From-SVN: r243805
2016-12-19 Janne Blomqvist <jb@gcc.gnu.org>
* Actually remove files that should have been removed by r243799.
This line, and those below, will be ignored--
M libgfortran/ChangeLog
D libgfortran/generated/exponent_r10.c
D libgfortran/generated/exponent_r16.c
D libgfortran/generated/exponent_r4.c
D libgfortran/generated/exponent_r8.c
D libgfortran/generated/fraction_r10.c
D libgfortran/generated/fraction_r16.c
D libgfortran/generated/fraction_r4.c
D libgfortran/generated/fraction_r8.c
D libgfortran/generated/nearest_r10.c
D libgfortran/generated/nearest_r16.c
D libgfortran/generated/nearest_r4.c
D libgfortran/generated/nearest_r8.c
D libgfortran/generated/rrspacing_r10.c
D libgfortran/generated/rrspacing_r16.c
D libgfortran/generated/rrspacing_r4.c
D libgfortran/generated/rrspacing_r8.c
D libgfortran/generated/set_exponent_r10.c
D libgfortran/generated/set_exponent_r16.c
D libgfortran/generated/set_exponent_r4.c
D libgfortran/generated/set_exponent_r8.c
D libgfortran/generated/spacing_r10.c
D libgfortran/generated/spacing_r16.c
D libgfortran/generated/spacing_r4.c
D libgfortran/generated/spacing_r8.c
D libgfortran/generated/transpose_c10.c
D libgfortran/generated/transpose_c16.c
D libgfortran/generated/transpose_c4.c
D libgfortran/generated/transpose_c8.c
D libgfortran/generated/transpose_i16.c
D libgfortran/generated/transpose_i4.c
D libgfortran/generated/transpose_i8.c
D libgfortran/generated/transpose_r10.c
D libgfortran/generated/transpose_r16.c
D libgfortran/generated/transpose_r4.c
D libgfortran/generated/transpose_r8.c
D libgfortran/intrinsics/malloc.c
D libgfortran/intrinsics/transpose_generic.c
D libgfortran/m4/exponent.m4
D libgfortran/m4/fraction.m4
D libgfortran/m4/nearest.m4
D libgfortran/m4/rrspacing.m4
D libgfortran/m4/set_exponent.m4
D libgfortran/m4/spacing.m4
D libgfortran/m4/transpose.m4
From-SVN: r243804
gcc/ChangeLog:
* print-rtl.c (rtx_writer::print_rtx_operand_code_r): For
non-virtual pseudos in compact mode, wrap the regno in '<' and '>'
rather than using a '%' prefix.
* rtl-tests.c (selftest::test_dumping_regs): Update for above change.
From-SVN: r243798
Make the perfect-forwarding constructor of a two-element tuple
sfinae away when the first argument is an allocator_arg.
* include/std/tuple (tuple(_U1&&, _U2&&)): Constrain.
* testsuite/20_util/tuple/cons/allocator_with_any.cc: New.
* testsuite/20_util/tuple/element_access/get_neg.cc: Adjust.
From-SVN: r243795
2016-12-19 Janus Weil <janus@gcc.gnu.org>
PR fortran/78545
* intrinsic.texi: Minor documentation fixes for non-standard
time-related intrinsics. Add references to standard intrinsics and
linkify some existing references.
From-SVN: r243794
This is another micro-optimisation in change_zero_ext. If an
(and (lshiftrt ... (N)) (M))
generated by change_zero_ext is equivalent to just
(lshiftrt ... (N))
(because the AND constant selects the N rightmost bits of the
result), strip off the AND.
gcc/ChangeLog:
2016-12-19 Dominik Vogt <vogt@linux.vnet.ibm.com>
* combine.c (change_zero_ext): Skip generation of redundant AND.
From-SVN: r243792
2016-12-18 Janus Weil <janus@gcc.gnu.org>
PR fortran/78848
* trans-io.c (get_dtio_proc): Generate non-typebound DTIO call for class
variables, if no typebound DTIO procedure is available.
2016-12-18 Janus Weil <janus@gcc.gnu.org>
PR fortran/78848
* gfortran.dg/dtio_22.f90: New test.
From-SVN: r243784
2016-12-18 Janus Weil <janus@gcc.gnu.org>
PR fortran/78592
* interfac.c (gfc_find_specific_dtio_proc): Fixup for r243005, making
sure that the generic list is followed through until the end.
2016-12-18 Janus Weil <janus@gcc.gnu.org>
PR fortran/78592
* gfortran.dg/dtio_21.f90: New test.
From-SVN: r243783
* lra-constraints.c (process_address): Add forward declaration.
(simplify_operand_subreg): In the MEM case, if the adjusted memory
reference is not sufficient aligned and the address was invalid,
reload the address before reloading the original memory reference.
Fix long lines and add a final return for the sake of clarity.
From-SVN: r243782
PR sanitizer/78832
* sanopt.c (sanitize_asan_mark_unpoison): Remove next variable, use
continue if gsi_next should be skipped.
(sanitize_asan_mark_poison): Remove prev variable, use continue if
gsi_prev should be skipped. When removing ASAN_MARK, do gsi_prev
first and gsi_remove on a previously made copy of the iterator.
* gcc.dg/asan/pr78832.c: New test.
From-SVN: r243777
2016-12-17 Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/78239
* decl.c(char_len_param_value): Also check for -fimplicit-none
when determining if implicit none is in force.
2016-12-17 Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/78239
* gfortran.dg/fimplicit_none_1.f90: New test.
* gfortran.dg/fimplicit_none_2.f90: New test.
From-SVN: r243773
* config/i386/i386.md (*tzcnt<mode>_1): Merge *tzcnt<mode>_1_falsedep_1
and *tzcnt<mode>_1 to define_insn_and_split pattern. Adjust split
condition to split after epilogue_completed.
(ctz<mode>2): Remove expander.
(ctz<mode>2): Merge *ctz<mode>2_falsedep_1 and *ctz<mode>2 to
define_insn_and_split pattern. Adjust split condition to split
after epilogue_completed.
(clz<mode>2_lznct): Remove expander.
(clz<mode>2_lzcnt): Merge *clz<mode>2_lzcnt_falsedep_1 and
*clz<mode>2 to define_insn_and_split pattern. Adjust split
condition to split after epilogue_completed.
(<lt_zcnt>_<mode>): Remove expander.
(<lt_zcnt>_<mode>): Merge *<lt_zcnt>_<mode>_falsedep_1 and
*<lt_zcnt>_<mode> to define_insn_and_split pattern. Adjust split
condition to split after epilogue_completed.
(<lt_zcnt>_hi): New insn pattern.
(popcount<mode>2): Remove expander.
(popcount<mode>2): Merge *popcount<mode>2_falsedep_1 and
*popcount<mode>2 to define_insn_and_split pattern. Adjust split
condition to split after epilogue_completed.
(popcounthi2): New insn pattern.
From-SVN: r243772
gcc/testsuite/ChangeLog:
2016-12-16 Kelvin Nilsen <kelvin@gcc.gnu.org>
* gcc.target/powerpc/byte-in-either-range-0.c: New test.
* gcc.target/powerpc/byte-in-either-range-1.c: New test.
* gcc.target/powerpc/byte-in-range-0.c: New test.
* gcc.target/powerpc/byte-in-range-1.c: New test.
* gcc.target/powerpc/byte-in-set-0.c: New test.
* gcc.target/powerpc/byte-in-set-1.c: New test.
* gcc.target/powerpc/byte-in-set-2.c: New test.
gcc/ChangeLog:
2016-12-16 Kelvin Nilsen <kelvin@gcc.gnu.org>
* config/rs6000/altivec.md (UNSPEC_CMPRB): New unspec value.
(UNSPEC_CMPRB2): New unspec value.
(UNSPEC_CMPEQB): New unspec value.
(cmprb): New expansion.
(*cmprb_internal): New insn.
(*setb_internal): New insn.
(cmprb2): New expansion.
(*cmprb2_internal): New insn.
(cmpeqb): New expansion.
(*cmpeqb_internal): New insn.
* config/rs6000/rs6000-builtin.def (BU_P9_2): New macro.
(BU_P9_64BIT_2): Likewise.
(BU_P9_OVERLOAD_2): Likewise.
(CMPRB): Add byte-in-range built-in function.
(CMBRB2): Add byte-in-either-range built-in function.
(CMPEQB): Add byte-in-set built-in function.
(CMPRB): Add overload support for byte-in-range function.
(CMPRB2): Add overload support for byte-in-either-range function.
(CMPEQB): Add overload support for byte-in-set built-in function.
* config/rs6000/rs6000-c.c (P9_BUILTIN_CMPRB): Macro expansion to
define argument types for new builtin.
(P9_BUILTIN_CMPRB2): Likewise.
(P9_BUILTIN_CMPEQB): Likewise.
* doc/extend.texi (PowerPC AltiVec Built-in Functions): Rearrange
the order of presentation for certain built-in functions
(scalar_extract_exp, scalar_extract_sig, scalar_insert_exp)
(scalar_cmp_exp_gt, scalar_cmp_exp_lt, scalar_cmp_exp_eq)
(scalar_cmp_exp_unordered, scalar_test_data_class)
(scalar_test_neg) to improve locality and flow. Document
the new __builtin_scalar_byte_in_set,
__builtin_scalar_byte_in_range, and
__builtin_scalar_byte_in_either_range functions.
From-SVN: r243770
Change the interfaces for backend methods that create statements to
always pass in the enclosing Bfunction for the statement. Having the
function available simplifies things if a temporary variable has to be
created during the construction of a statement.
This also includes a change to the Mark_lvalue_varexprs helper
class to handle indirections on the left hand side of assignments
(e.g. "*x.y = ...").
Reviewed-on: https://go-review.googlesource.com/34471
* go-gcc.cc (Gcc_backend::expression_statement): Add Bfunction*
parameter.
(Gcc_backend::init_statement): Likewise.
(Gcc_backend::assignment_statement): Likewise.
(Gcc_backend::if_statement): Likewise.
From-SVN: r243766
2016-12-16 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/78622
* io.c (format_lex): Continue of string delimiter seen.
* io/transfer.c (get_dt_format): New static function to alloc
and set the DT iotype string, handling doubled quotes.
(formatted_transfer_scalar_read,
formatted_transfer_scalar_write): Use new function.
* gfortran.dg/dtio_20.f03: New test.
From-SVN: r243765
PR fortran/78757
* trans-expr.c (gfc_conv_procedure_call): Emit DECL_EXPR for the
type pstr var points to.
* gfortran.dg/char_result_16.f90: New test.
From-SVN: r243761
PR c/78408
* tree-ssa-ccp.c: Include tree-dfa.h.
(optimize_memcpy): New function.
(pass_fold_builtins::execute): Use it. Remove useless conditional
break after BUILT_IN_VA_*.
* gcc.dg/pr78408-1.c: New test.
* gcc.dg/pr78408-2.c: New test.
From-SVN: r243753
PR tree-optimization/78819
* tree-vrp.c (find_switch_asserts): Return if the insertion limit is 0.
Don't register an assertion if the default case shares a label with
another case.
* gcc.dg/tree-ssa/vrp112.c: New test.
From-SVN: r243746
The negdi2 patterns for ARM and Thumb-2 are duplicated because Thumb-2
doesn't support RSC with an immediate. We can however emulate RSC with
zero using a shifted SBC. If we add this to subsi3_carryin the negdi
patterns can be merged, simplifying things a bit. This should generate
identical code in all cases.
gcc/
* config/arm/arm.md (subsi3_carryin): Add Thumb-2 RSC #0.
(arm_negdi2) Rename to negdi2_insn, allow on Thumb-2.
* config/arm/thumb2.md (thumb2_negdi2): Remove pattern.
From-SVN: r243745
Thumb uses a special register allocation order to increase the use of low
registers. Oddly enough, LR appears before R12, which means that LR must
be saved and restored even if R12 is available. Swapping R12 and LR means
this simple example now uses R12 as a temporary (just like ARM):
int f(long long a, long long b)
{
if (a < b) return 1;
return a + b;
}
gcc/
* config/arm/arm.c (thumb_core_reg_alloc_order): Swap R12 and R14.
From-SVN: r243744
