* configure.ac: Separate cases disabling target-libssp,
target-libiberty, target-libstdc++-v3 and Fortran from general
case over targets.
* configure: Regenerate.
From-SVN: r171827
2011-03-24 Paolo Bonzini <bonzini@gnu.org>
* configure.ac: Do not include mh-x86omitfp.
* configure: Regenerate.
config:
2011-03-24 Paolo Bonzini <bonzini@gnu.org>
* mh-x86omitfp: Remove.
From-SVN: r171421
2011-03-13 Jack Howarth <howarth@bromo.med.uc.edu>
PR lto/48086
* configure.ac: Disable LTO on darwin due to an assembler change in
Xcode 3.2.6/4.0 that limits the total number of sections/segments to
under 256.
* configure: Regenerate.
From-SVN: r170929
* config/cloog.m4 (CLOOG_REQUESTED): Use $2 if --without-cloog.
* configure.ac: If with_ppl is no, move setting with_cloog=no
after CLOOG_REQUESTED check.
* configure: Regenerated.
From-SVN: r169249
2011-01-25 Sebastian Pop <sebastian.pop@amd.com>
* configure.ac: Call AC_MSG_ERROR when PPL 0.11 is not present and
CLooG has been requested.
* configure: Regenerated.
From-SVN: r169215
2011-01-25 Sebastian Pop <sebastian.pop@amd.com>
toplev/
* configure: Regenerated.
* configure.ac: Check for version 0.11 (or later revision) of PPL.
toplev/gcc/
* doc/install.texi: Update the expected version number of PPL to 0.11.
* graphite-ppl.c (ppl_powerset_is_empty): Remove now dead code under
#if PPL_VERSION_MINOR < 11.
From-SVN: r169207
Now that gdb supports Blackfin targets, no need to mask it.
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
From-SVN: r168943
Backport from Libtool: Fix relink mode to use absolute path if hardcode_minus_L.
/:
* ltmain.sh (relink): Use absolute path when hardcoding with -L.
From-SVN: r168762
* Makefile.in: Regenerate.
* Makefile.def (gcc host module) and soft dependency on lto-plugin
and configure dependency on lto-plugin configure.
(lto-plugin module): Remove dependency on GCC; add dependency on
liniberty.
* doc/invoke.texi: (-flto, -fuse-linker-plugin): Update defaults
and no longer claim that gold is required for linker plugin.
* configure: Regenerate.
* gcc.c (PLUGIN_COND): New macro.
(LINK_COMMAND_SPEC): Use it.
(main): Default to plugin enabled with HAVE_LTO_PLUGIN is set.
* config.in (HAVE_LTO_PLUGIN): New.
* configure.ac (--with-lto-plugin): New parameter; autodetect
HAVE_LTO_PLUGIN.
From-SVN: r168593
* configure.ac: Only disable a language library if no language needs
it. Don't let --disable-libgcj uncondtionally disable libffi.
* configure: Rebuild.
From-SVN: r166993
* config/cloog.m4: Add -enable-cloog-backend=(isl|ppl|ppl-legacy) to
define the cloog backend to use. Furthermore, only pass the ppllibs
to the configure checks, if necessary.
*configure: Regenerate.
From-SVN: r166684
* configure.ac (*-*-darwin*): Use mh-darwin for all Darwin variants.
* configure: Regenerate.
* config/mh-ppc-darwin: Rename to mh-darwin.
gcc:
* gcc/configure.ac: Filter -mdynamic-no-pic from CFLAGS when testing for
plugin capabilities.
* gcc/configure: Regenerate.
gcc/testsuite:
* lib/plugin-support.exp (plugin-test-execute): Filter -mdynamic-no-pic from
plugin build flags on Darwin targets.
From-SVN: r166302
ChangeLog:
2010-11-03 Ian Lance Taylor <iant@google.com>
Dave Korn <dave.korn.cygwin@gmail.com>
PR lto/46273
* configure.ac: Remove libelf tests. Build lto-plugin on ELF always
and on other supported platforms whenever LTO is enabled.
* configure: Rebuild.
gcc/ChangeLog:
2010-11-03 Ian Lance Taylor <iant@google.com>
PR lto/46273
* gcc/config.gcc: Don't set lto_binary_reader.
* doc/install.texi (Prerequisites): Remove libelf paragraphs.
(Configuration): Mention --disable-lto. Remove --with-libelf
paragraph.
lto-plugin/ChangeLog:
2010-11-03 Dave Korn <dave.korn.cygwin@gmail.com>
PR lto/46273
* lto-plugin.h: Delete.
* lto-plugin-elf.c: Likewise.
* lto-plugin-coff.c: Likewise.
* configure.ac: Don't use libelf, don't source config.gcc.
(LIBELFLIBS): Delete.
(LIBELFINC): Delete.
(LTO_FORMAT): Delete.
(SYM_STYLE): Add AC_DEFINE var, set based on $target.
(config.h): Add AC_CONFIG_HEADERS directive.
* Makefile.am (LIBELFLIBS): Delete.
(LIBELFINC): Delete.
(LTO_FORMAT): Delete.
(DEFS): Import.
(AM_CPPFLAGS): Use it. Don't use LIBELFINC.
(liblto_plugin_la_SOURCES): Don't use LTO_FORMAT, don't include
any object-format-specific source file in the link.
(liblto_plugin_la_LIBADD): Don't use LIBELFLIBS.
* config.h.in: Generate.
* configure: Regenerate.
* Makefile.in: Likewise.
* lto-plugin.c (O_BINARY): Definition moved here from lto-plugin.h.
(LTO_SEGMENT_NAME): New definition.
(LTO_SECTION_PREFIX): Definition moved here from lto-plugin.h.
(LTO_SECTION_PREFIX_LEN): New definition.
(struct sym_aux): Struct definition moved here from lto-plugin.h.
(struct plugin_symtab): Likewise.
(struct plugin_objfile): Likewise.
(struct plugin_objfile): New struct def.
(enum symbol_style): New enum type.
(add_symbols): Make static.
(claimed_files): Likewise.
(num_claimed_files): Likewise.
(sym_style): New global.
(check): Make static.
(parse_table_entry): Likewise. Respect sym_style when extracting
symbol from symtab entry.
(translate): Make static.
(resolve_conflicts): Likewise.
(process_symtab): New function, per-section callback version of
old object-format-specific handling from deleted lto-plugin-elf.c.
(claim_file_handler): Convert ELF-specific version from deleted
lto-plugin-elf.c to simple_object interface and move here.
(process_options): Allow new '-sym-style=' option.
(onload): Don't call deleted onload_format_checks hook.
From-SVN: r166233
ChangeLog:
2010-10-07 Dave Korn <dave.korn.cygwin@gmail.com>
* configure.ac (build_lto_plugin): New shell variable.
(--enable-lto): Turn on by default for all non-ELF platforms that
have had LTO support added so far. Set build_lto_plugin appropriately
for both ELF and non-ELF.
(configdirs): Add lto-plugin or not based on build_lto_plugin.
* configure: Regenerate.
gcc/ChangeLog:
2010-10-07 Dave Korn <dave.korn.cygwin@gmail.com>
* config.host (host_lto_plugin_soname): New shell variable.
* configure.ac (LTOPLUGINSONAME): Add an AC_DEFINE for the above.
* config.in: Regenerate.
* configure: Regenerate.
* gcc.c (main): Use LTOPLUGINSONAME instead of hard-coding name of
LTO plugin shared library.
lto-plugin/ChangeLog:
2010-10-07 Dave Korn <dave.korn.cygwin@gmail.com>
* configure.ac: Source config.gcc to determine lto_binary_reader.
(LTO_FORMAT): New AC_SUBST variable inferred from lto_binary_reader.
* Makefile.am (LTO_FORMAT): Import.
(liblto_plugin_la_SOURCES): Add object format dependent module
defined by LTO_FORMAT.
(liblto_plugin_la_LIBADD): Allow for both PIC and non-PIC libiberty,
and work around libtool warning.
* configure: Regenerate.
* Makefile.in: Likewise.
* lto-plugin.c (struct sym_aux): Move to new lto-plugin.h.
(struct sym_aux): Likewise.
(struct plugin_symtab): Likewise.
(struct plugin_file_info): Likewise.
(LTO_SECTION_PREFIX): Likewise.
(add_symbols): Make non-static.
(claimed_files): Likewise.
(num_claimed_files): Likewise.
(check): Likewise.
(parse_table_entry): Likewise.
(translate): Likewise.
(resolve_conflicts): Likewise.
(process_symtab): Move to new lto-plugin-elf.c object format dependent
source file.
(claim_file_handler): Likewise, and make non-static.
(onload): Call new onload_format_checks function.
* lto-plugin.h: New file.
(LTO_SECTION_PREFIX): Move here.
(struct sym_aux): Likewise.
(struct plugin_symtab): Likewise.
(struct plugin_file_info): Likewise.
(claim_file_handler): Add new function prototype.
(onload_format_checks): Likewise.
(check): Declare extern.
(translate): Likewise.
(parse_table_entry): Likewise.
(resolve_conflicts): Likewise.
(add_symbols): Likewise.
(claimed_files): Likewise.
(num_claimed_files): Likewise.
* lto-plugin-elf.c (process_symtab): Move here.
(claim_file_handler): Likewise, and make non-static.
(onload_format_checks): New function factored out from onload.
* lto-plugin-coff.c (claim_file_handler): New function stub.
(onload_format_checks): Likewise.
From-SVN: r165133
* configure.ac: Support all v850 targets.
* configure: Regenerate.
* config/v850/lib1funcs.asm (save_r2_r31, return_r2_r31,
save_r20_r31, return_r20_r31, save_r21_r31, return_r21_r31,
save_r22_r31, return_r22_r31, save_r23_r31, return_r23_r31,
save_r24_r31, return_r24_r31, save_r25_r31, return_r25_r31,
save_r26_r31, return_r26_r31, save_r27_r31, return_r27_r31,
save_r28_r31, return_r28_r31, save_r29_r31, return_r29_r31,
save_r31, return_r31, save_interrupt, return_interrupt,
save_all_interrupt, return_all_interrupt, L_save_r2_r31,
L_return_interrupt, callt_return_interrupt, L_restore_all_interrupt,
L_save_##START##_r31c, L_callt_save_r31c: Updated as per the
new ABI requirements.
save_r6_r9, L_callt_save_r6_r9: Remove.
* config/v850/predicates.md (even_reg_operand, disp23_operand,
const_float_1_operand const_float_0_operand): New Predicates.
(pattern_is_ok_for_prepare, pattern_is_ok_for_prologue,
pattern_is_ok_for_epilogue): Update as per the ABI requirements.
* config/v850/t-v850: Update multilibs for new target variants.
(save_varargs, callt_save_varargs, callt_save_r6_r9): Remove.
* config/v850/t-v850e: Likewise.
* config/v850/v850.c (v850_issue_rate): New.
(v850_strict_argument_naming): New.
(function_arg): Modify to generate a different ABI.
(print_operand): Update case 'z' to support float modes.
(output_move_single): Modify to generate appropriate and better
assembly.
(v850_float_z_comparison_operator, v850_select_cc_mode,
v850_float_nz_comparison_operator, v850_gen_float_compare,
v850_gen_compare): New functions to support comparison of
float values.
(ep_memory_offset): Add support for V850E2 targets.
(INTERRUPT_FIXED_NUM, INTERRUPT_ALL_SAVE_NUM): Update.
(INTERRUPT_REGPARM_NUM): Remove.
(compute_register_save_size): Add extra case to save/restore
long call.
(use_prolog_function): New function to support prologue.
(expand_prologue): Add support for V850E2 targets and modified
as per the current ABI requirements.
(expand_epilogue): Likewise.
(construct_restore_jr): Modify based on TARGET_LONG_CALLS.
(construct_save_jarl): Likewise.
(construct_dispose_instruction): Update as per the current ABI
requirements.
(construct_prepare_instruction): Likewise.
* config/v850/v850.h(TARGET_CPU_DEFAULT): Add target predefines.
(TARGET_CPU_v850e2, TARGET_CPU_v850e2v3): Define
(CPP_SPEC): Updated to support v850e2 targets.
(STRICT_ALIGNMENT): Modified.
(FIRST_PSEUDO_REGISTER): Updated to add even registers.
(FIXED_REGISTERS): Likewise.
(CALL_USED_REGISTERS): Likewise.
(CONDITIONAL_REGISTER_USAGE): Updated.
(HARD_REGNO_MODE_OK): Updated.
(reg_class): Updated to add even registers.
(REG_CLASS_NAMES): Likewise.
(REG_CLASS_CONTENTS): Likewise.
(REGNO_REG_CLASS): Updated for CC registers.
(REG_CLASS_FROM_LETTER): Added support for even registers.
(REGNO_OK_FOR_BASE_P): Updated for CC registers.
(STACK_POINTER_REGNUM, FRAME_POINTER_REGNUM, LINK_POINTER_REGNUM,
ARG_POINTER_REGNUM): Updated.
(FUNCTION_ARG_ADVANCE): Define.
(REG_PARM_STACK_SPACE): Update as per the current ABI requirements.
(OUTGOING_REG_PARM_STACK_SPACE): Remove.
(EXTRA_CONSTRAINT): Add new constraint 'W' for 23-bit displacement.
(GO_IF_LEGITIMATE_ADDRESS): Updated.
(SELECT_CC_MODE): Define.
(REGISTER_NAMES): Updated to add psw and fcc registers.
(ADDITIONAL_REGISTER_NAMES): Updated.
(ASM_OUTPUT_ADDR_DIFF_ELT): Updated to support new targets.
(JUMP_TABLES_IN_TEXT_SECTION): Updated.
* config/v850/v850.md (define_constants): Define new constants.
(type): Update store,bit1,macc,div,fpu and single attributes.
(cpu): New attribute.
(cc): Add set_z attribute.
(unsign23byte_load, sign23byte_load, unsign23hword_load,
sign23hword_load, 23word_load, 23byte_store, 23hword_store,
23word_store): New instructions for 23-bit displacement load and
store.
(movqi_internal, movhi_internal): Update the attributes.
(movsi, movsi_internal_v850e): Updated to support v850e2 targets.
(movsi_internal_v850e, movsi_internal, movsf_internal): Update
the attributes.
(v850_tst1): Modified using CC_REGNUM.
(tstsi): Remove.
(cmpsi): Modified as define_expand from define_insn.
(cmpsi_insn, cmpsf, cmpdf): New instructions.
(addsi3, subsi3, negsi2, divmodsi4, udivmodsi4, divmodhi4,
udivmodhi4, v850_clr1_1, v850_clr1_2, v850_clr1_3, andsi3,
v850_set1_1, v850_set1_3, iorsi3, v850_not1_1, v850_not1_3, xorsi3,
one_cmplsi2): Clobber the CC_REGNUM register.
(v850_clr1_1, v850_clr1_2, v850_clr1_3, andsi3, v850_set1_1,
v850_set1_2, v850_set1_3, iorsi3, v850_not1_1, v850_not1_2,
v850_not1_3, xorsi3, one_cmplsi2): Update the attributes
accordingly.
(setf_insn, set_z_insn, set_nz_insn): New instructions for
v850e2v3 target.
(movsicc_normal_cc, movsicc_reversed_cc): New instructions.
(movsicc, movsicc_normal, movsicc_reversed): Add support for V850E2
targets.
(sasf_1, sasf_2): Remove.
(sasf): New instruction.
(rotlhi3, rotlhi3_8, rotlsi3, rotlsi3_16): Update to support V850E2
targets. CC_REGNUM register is clobbered and attributes are
updated.
(branch_z_normal, branch_z_invert, branch_nz_normal,
branch_nz_invert): New branch related instructions.
(jump): Updated the attributes.
(switch): Update to support new targets. CC_REGNUM register is
clobbered and attributes are updated.
(call_internal_short, call_internal_long, call_value_internal_short,
call_value_internal_long): Updated the attributes.
(zero_extendhisi2, zero_extendqisi2): CC_REGNUM register is
clobbered and attributes are updated.
(extendhisi_insn, extendhisi2, extendqisi_insn, extendqisi2):
Update to support new targets. CC_REGNUM register is clobbered.
(ashlsi3_v850e2, lshrsi3_v850e2, ashrsi3_v850e2): New shift
instructions.
(lshrsi3, ashrsi3): CC_REGNUM register is clobbered and attributes
are updated.
(ffssi2, addsf3, adddf3, subsf3, subdf3, mulsf3, muldf3, divsf3,
divdf3, minsf3, mindf3, maxsf3, maxdf3, abssf2, absdf2, negsf2,
negdf2, sqrtsf2, sqrtdf2, truncsfsi2, truncdfsi2, floatsisf2,
floatsidf2, extendsfdf2, extenddfsf2, recipsf2, recipdf2,
rsqrtsf2, rsqrtdf2, maddsf4, msubsf4, nmaddsf4, nmsubsf4,
cmpsf_le_insn, cmpsf_lt_insn, cmpsf_ge_insn, cmpsf_gt_insn,
cmpsf_eq_insn, cmpsf_ne_insn, cmpdf_le_insn, cmpdf_lt_insn,
cmpdf_ge_insn, cmpdf_gt_insn, cmpdf_eq_insn, cmpdf_ne_insn, trfsr,
movsfcc, movdfcc, movsfcc_z_insn, movsfcc_nz_insn, movdfcc_z_insn,
movdfcc_nz_insn, movedfcc_z_zero, movedfcc_nz_zero): New floating
point instructions defined for V850e2v3 target.
(callt_save_interrupt, callt_return_interrupt, return_interrupt):
Add support for V850E2 targets and CC_REGNUM register is clobbered.
(callt_save_all_interrupt, callt_restore_all_interrupt): Add
support for new targets.
* config/v850/v850-modes.def: New file.
* config/v850/v850.opt(mstrict-align): Remove.
(mno-strict-align, mjump-tables-in-data-section, mv850e2,
mv850e2v3): New command line options for V850.
* config.gcc: Update the newly added files.
* doc/invoke.texi: Update the newly added command line options for
V850 target.
From-SVN: r162530
2010-07-17 Jack Howarth <howarth@bromo.med.uc.edu>
PR target/44862
* Makefile.tpl (POSTSTAGE1_CXX_EXPORT):
Provide -B option to allow for link spec %s substitutions for
libstdc++.a on darwin.
* Makefile.in: Regenerate.
From-SVN: r162275
* config.sub: Update to version 2010-05-21.
* config.guess: Update to version 2010-04-03.
Also, move a changelog entry to correct ChangeLog.
From-SVN: r159820
Steven Bosscher <steven@gcc.gnu.org>
ChangeLog:
* configure.ac (--enable-lto): All *-apple-darwin* now support LTO.
* configure: Regenerate.
gcc/ChangeLog:
* config.gcc (powerpc-*-darwin*, powerpc64-*-darwin*): Add
lto-macho as lto_binary_reader.
* darwin.c (darwin_asm_named_section): Do not add assembler comment
after .section directive; just print it before the directive instead.
M gcc/config.gcc
M gcc/config/darwin.c
M ChangeLog
M gcc/ChangeLog
From-SVN: r159527
ChangeLog:
* configure.ac (--enable-lto): Add x86_64-apple-darwin* as
a platform that supports LTO.
* configure: Regenerate.
gcc/ChangeLog:
* config.gcc (i[34567]86-*-darwin*, x86_64-*-darwin*): Add
lto-macho as lto_binary_reader.
* target.h (struct gcc_target): New hooks lto_start and lto_end.
* target-def.h (TARGET_ASM_LTO_START, TARGET_ASM_LTO_END): Define.
* cgraphunit.c (ipa_passes): Wrap LTO assembler output generation
in lto_start and lto_end calls.
(is_elf_or_coff): Rename to maybe_lto_object_file. Add Mach-O
magic numbers.
(scan_prog_file): Update is_elf_or_coff call.
* doc/tm.text (TARGET_ASM_LTO_START, TARGET_ASM_LTO_END): Document.
* collect2.c (main): Fix enum comparison.
* config/darwin-protos.h (darwin_asm_lto_start, darwin_asm_lto_end):
Add prototypes.
* darwin9.h (LINK_COMMAND_SPEC): Pass -flto and -fwhopr to the linker.
* darwin.h (LINK_COMMAND_SPEC): Likewise. Define TARGET_ASM_LTO_START
and TARGET_ASM_LTO_END.
* darwin.c: Include obstack.h and lto-streamer.h.
(lto_section_names_offset, lto_section_names_obstack,
lto_asm_out_file, lto_asm_out_name, saved_asm_out_file): New static
global variables.
(LTO_SEGMENT_NAME, LTO_NAMES_SECTION): New defines.
(darwin_asm_lto_start): New function. Redirect output to asm_out_file
to a temporary file.
(darwin_asm_lto_end): New function. Restore asm_out_file.
(darwin_asm_named_section): For LTO sections, replace the name with
the offset of the section name in a string table, and build this
table.
(darwin_file_start): Initialize global vars for LTO support.
(darwin_file_end): If output to asm_out_file was redirected, append it
to the proper asm_out_file here. Add the section names section.
lto/ChangeLog:
* lto.h (struct lto_file_struct): Document offset member.
* lto-endian.h: New file.
* lto-macho.h: New file.
* lto-macho.c: New file.
* Make-lang.in: Add rule for lto-macho.o.
From-SVN: r159173
2010-05-05 Sebastian Pop <sebastian.pop@amd.com>
* configure.ac: Allow all the versions greater than 0.10 of PPL.
* configure: Regenerated.
From-SVN: r159134
* configure.ac (--enable-gold): Support both, both/gold and
both/bfd to add gold to configdirs without removing ld.
* configure: Regenerated.
* Makefile.def: Add install-gold dependency to install-ld.
* Makefile.in: Regenerated.
Co-Authored-By: H.J. Lu <hongjiu.lu@intel.com>
From-SVN: r158786
ChangeLog:
PR lto/42776
* configure.ac (--enable-lto): Refactor handling so libelf tests
are only performed inside then-clause of ACX_ELF_TARGET_IFELSE,
and allow LTO to be explicitly enabled on non-ELF platforms that
are known to support it inside else-clause.
* configure: Regenerate.
gcc/ChangeLog:
PR lto/42776
* configure.ac (gcc_cv_as_section_has_align): Set if installed
binutils supports extended .section directive needed by LTO, or
warn if older binutils found.
(LTO_BINARY_READER): New AC_SUBST'd variable.
(LTO_USE_LIBELF): Likewise.
* gcc/config.gcc (lto_binary_reader): New target-specific configure
variable.
* gcc/Makefile.in (LTO_BINARY_READER): Import AC_SUBST'd autoconf var.
(LTO_USE_LIBELF): Likewise.
* configure: Regenerate.
* collect2.c (is_elf): Rename from this ...
(is_elf_or_coff): ... to this, and recognize and allow i386 COFF
object files in addition to ELF-formatted ones.
(scan_prog_file): Caller updated. Also allow for LTO info marker
symbol to be prefixed or not by an extra underscore.
* config/i386/t-cygming (winnt.o): Also depend on LTO_STREAMER_H.
* config/i386/winnt.c: Also #include lto-streamer.h
(i386_pe_asm_named_section): Specify 1-byte section alignment for
LTO named sections.
(i386_pe_asm_output_aligned_decl_common): Add comment.
(i386_pe_maybe_record_exported_symbol): Allow decl arg to be NULL.
gcc/lto/ChangeLog:
PR lto/42776
* Make-lang.in (LTO_OBJS): Use LTO_BINARY_READER instead of
hardcoding 'lto-elf.o'.
($(LTO_EXE)): Use LTO_USE_LIBELF instead of hardcoding '-lelf'.
* lto-coff.h: New file.
* lto-coff.c: Likewise.
gcc/testsuite/ChangeLog:
PR lto/42776
* lib/lto.exp (lto_prune_vis_warns): New function.
(lto-link-and-maybe-run): Call it.
From-SVN: r158762
2010-04-13 Steve Ellcey <sje@cup.hp.com>
* configure: Regenerate after change to elf.m4.
In config subdir:
2010-04-13 Steve Ellcey <sje@cup.hp.com>
* elf.m4: Add hppa[12]*-*-hpux* to list of non-elf platforms.
From-SVN: r158285
PR 11238
* Makefile.tpl (local-distclean): Also remove config.cache files in
sub-directories as there may not be Makefiles present in the
sub-directories.
* Makefile.in: Regenerate.
* configure.ac: Revert previous delta.
* configure: Regenerate.
From-SVN: r156826
PR libstdc++/36101, PR libstdc++/42813
* configure.ac (bootstrap_target_libs): Make inclusion of
target-libgomp conditional on libgomb being in target_configdirs.
* configure: Regenerate.
From-SVN: r156218
2010-01-02 Richard Guenther <rguenther@suse.de>
PR lto/41529
* configure.ac: Include config/elf.m4. Disable LTO if not
builting for an elf target.
* configure: Regenerate.
config/
* elf.m4: New file.
From-SVN: r155565
2009-11-21 Sebastian Pop <sebpop@gmail.com>
* configure.ac: Check for version 0.15.5 or later revision of CLooG.
* configure: Regenerated.
From-SVN: r154635
./: * configure.ac: Change default of poststage1_ldflags to be empty if
poststage1_libs is set. When poststage1_libs is empty, and
ENABLE_BUILD_WITH_CXX is set, add -static-libgcc.
* configure: Rebuild.
gcc/:
* Makefile.in (HOST_LIBS): Move higher in file.
(LINKER, LINKER_FLAGS): If ENABLE_BUILD_WITH_CXX, but $(HOST_LIBS)
is not empty, set to $(CC) and $(CFLAGS).
From-SVN: r154422
* configure.ac: Add libelf to host_libs. Enable in-tree configury
of ppl and cloog. Fix in-tree configury of libelf, skip tests.
Fix portability of test of C++ as bootstrap language. Add
ppl/src/ppl-config.o to the bootstrap compare exclusion list.
* configure: Rebuild.
* Makefile.def: Drop host and target settings from gmp, mpfr, ppl,
and cloog. Fix in-tree ppl configuration. Introduce libelf
in-tree building.
* Makefile.tpl (POSTSTAGE1_CXX_EXPORT): New.
(POSTSTAGE1_HOST_EXPORTS): Use it.
(STAGE[+id+]_CXXFLAGS): New.
(BASE_FLAGS_TO_PASS): Pass it down.
(configure-stage[+id+]-[+prefix+][+module+]): Use it. Add
extra_exports.
(all-stage[+id+]-[+prefix+][+module+]): Likewise.
(configure-[+prefix+][+module+], all-[+prefix+][+module+]): Add
extra_exports.
* Makefile.in: Rebuild.
From-SVN: r154211
2009-11-02 Benjamin Kosnik <bkoz@redhat.com>
* MAINTAINERS: Add Jonathan Wakely under Various Maintainers, move
Phil Edwards to Write-After Approval.
From-SVN: r153833
2009-10-30 Kai Tietz <kai.tietz@onevision.com>
* configure.ac: Disable target-winsup & co for
x86_64-*-mingw* and *-w64-mingw* targets.
* configure: Regenerated.
From-SVN: r153761
* MAINTAINERS: Add myself as a maintainer for the RX port.
gcc
* config.gcc: Add support for RX target.
* config/rx: New directory.
* config/rx/constraints.md: New file.
* config/rx/predicates.md: New file.
* config/rx/rx.c: New file.
* config/rx/rx.h: New file.
* config/rx/rx.md: New file.
* config/rx/rx.opt: New file.
* config/rx/rx-protos.h: New file.
* config/rx/t-rx: New file.
* doc/extend.texi: Document RX function attributes.
* doc/invoke.texi: Document RX specific command line options.
* doc/contrib.texi: Document RX contribution.
* doc/md.texi: Document RX constraints.
* doc/install.texi: Document RX support.
libgcc
* config.host: Add support for RX target.
* config/rx: New directory.
* config/rx/rx-abi-functions.c: New file. Supplementary
functions for libgcc to support the RX ABI.
* config/rx/rx-abi.h: New file. Supplementary header file for
libgcc RX ABI functions.
* config/rx/t-rx: New file: Makefile fragment for building
libgcc for the RX.
gcc/testsuite
* lib/target-supports.exp (check_profiling_available):
Profiling is not, currently, available for the RX port.
(check_effective_target_hard_float): Add support for RX
target.
* gcc.target/rx: New directory.
* gcc.target/rx/builtins.c: New test file.
* gcc.target/rx/interrupts.c: New test file.
* gcc.target/rx/rx-abi-function-tests.c: New test file.
* gcc.target/rx/zero-width-bitfield.c: New test file.
* gcc.target/rx/i272091.c: New test file.
* gcc.target/rx/packed-struct.c: New test file.
* gcc.target/rx/rx.exp: New file: Drives RX tests.
From-SVN: r153557
2009-10-22 Richard Guenther <rguenther@suse.de>
* configure.ac: Do not set LIBS for ppl/cloog checks. Disable
cloog if the ppl version check failed. Move flags saving
before setting in libelf check.
* configure: Regenerate.
From-SVN: r153447
2009-10-21 Richard Guenther <rguenther@suse.de>
* configure.ac: Adjust the ppl and cloog configure to work as
documented. Disable cloog if ppl was disabled. Omit the version
checks if they were disabled.
* configure: Re-generate.
From-SVN: r153055
/:
* configure.ac: Add 'lto' to enable_languages, not
new_enable_languages, and only if not already present.
* configure: Regenerate.
From-SVN: r152697
* README: Refer to the various COPYING* files instead of just
COPYING.
Refer to http://gcc.gnu.org/bugs/ for bug reporting instructions.
From-SVN: r152630
2009-10-07 Richard Guenther <rguenther@suse.de>
* MAINTAINERS (LTO): List Diego Novillo, Rafael Avila de Espindola,
and Richard Guenther as reviewers.
(LTO plugin): List Rafael Avila de Espindola and Cary Coutant
as reviewers.
From-SVN: r152527
2009-10-01 Loren J. Rittle <ljrittle@acm.org>
Paolo Bonzini <bonzini@gnu.org>
* Makefile.tpl (POSTSTAGE1_HOST_EXPORTS): Use $$s rather than
$(srcdir).
* Makefile.in: Rebuilt.
Co-Authored-By: Paolo Bonzini <bonzini@gnu.org>
From-SVN: r152387
/:
* configure.ac: Do not use $extrasub for replacing @if/@endif
parts in Makefile; instead, use additional arguments to
AC_CONFIG_COMMANDS to do the replacement manually, with several
sed invocations, to avoid HP-UX sed command limits.
* configure: Regenerate.
From-SVN: r151525
ChangeLog:
* configure.ac (--with-build-config): New. Set BUILD_CONFIG.
Default to bootstrap-debug only if compare-debug works.
* configure: Rebuilt.
* Makefile.tpl: Make BUILD_CONFIG configure-configurable.
* Makefile.in: Rebuilt.
contrib/ChangeLog:
* bootstrap-debug-big.mk (STAGE2_CFLAGS): Drop -gtoggle.
* bootstrap-debug-lean.mk: Update comments.
(STAGE2_CFLAGS): Likewise.
(do-compare): Don't override.
gcc/ChangeLog:
* doc/invoke.texi (BUILD_CONFIG): Document --with-build-config.
(bootstrap-debug): Explain conditions in which it becomes default.
(bootstrap-debug-big): Rather than duplicate bootstrap-debug,
make it add to it.
From-SVN: r151367