* method.c (lookup_comparison_result): Use %qD instead of %<%T::%D%>
to print the decl.
(lookup_comparison_category): Use %qD instead of %<std::%D%> to print
the decl.
* g++.dg/cpp2a/spaceship-err3.C: New test.
From-SVN: r278375
* include/std/string_view (basic_string_view(It, End)): Add range
constructor and deduction guide from P1391R4.
* testsuite/21_strings/basic_string_view/cons/char/range.cc: New test.
From-SVN: r278371
This adds another chunk of the <ranges> header.
The changes from P1456R1 (Move-only views) and P1862R1 (Range adaptors
for non-copyable iterators) are included, but not the changes from
P1870R1 (forwarding-range<T> is too subtle).
The tests for subrange and iota_view are poor and should be improved.
* include/bits/regex.h (match_results): Specialize __enable_view_impl.
* include/bits/stl_set.h (set): Likewise.
* include/bits/unordered_set.h (unordered_set, unordered_multiset):
Likewise.
* include/debug/multiset.h (__debug::multiset): Likewise.
* include/debug/set.h (__debug::set): Likewise.
* include/debug/unordered_set (__debug::unordered_set)
(__debug::unordered_multiset): Likewise.
* include/std/ranges (ranges::view, ranges::enable_view)
(ranges::view_interface, ranges::subrange, ranges::empty_view)
(ranges::single_view, ranges::views::single, ranges::iota_view)
(ranges::views::iota): Define for C++20.
* testsuite/std/ranges/empty_view.cc: New test.
* testsuite/std/ranges/iota_view.cc: New test.
* testsuite/std/ranges/single_view.cc: New test.
* testsuite/std/ranges/view.cc: New test.
From-SVN: r278370
Also make it a parmeterized name: @cceq_{ior,rev}_compare_<mode>.
* config/rs6000/rs6000.md (cceq_ior_compare): Rename to...
(@cceq_ior_compare_<mode> for GPR): ... this. Allow GPR instead of
just SI.
(cceq_rev_compare): Rename to...
(@cceq_rev_compare_<mode> for GPR): ... this. Allow GPR instead of
just SI.
(define_split for <bd>tf_<mode>): Add SImode first argument to
gen_cceq_ior_compare.
From-SVN: r278366
This was not meant to be on the branch I committed r278364 from, as it
is not ready to commit yet.
* include/std/ranges: Revert accidentally committed changes.
From-SVN: r278365
This change avoids storing a copy of a stop_token object that isn't
needed and won't be passed to the callable object. This slightly reduces
memory usage when the callable doesn't use a stop_token. It also removes
indirection in the invocation of the callable in the new thread, as
there is no lambda and no additional calls to std::invoke.
It also adds some missing [[nodiscard]] attributes, and the non-member
swap overload for std::jthread.
* include/std/thread (jthread::jthread()): Use nostopstate constant.
(jthread::jthread(Callable&&, Args&&...)): Use helper function to
create std::thread instead of indirection through a lambda. Use
remove_cvref_t instead of decay_t.
(jthread::joinable(), jthread::get_id(), jthread::native_handle())
(jthread::hardware_concurrency()): Add nodiscard attribute.
(swap(jthread&. jthread&)): Define hidden friend.
(jthread::_S_create): New helper function for constructor.
From-SVN: r278364
This patch uses distinct values for the FFR and FFRT outputs of
aarch64_wrffr, so that a following aarch64_copy_ffr_to_ffrt has
an effect. This is needed to avoid regressions with later patches.
The block comment at the head of the file already described
the pattern this way, and there was already an unspec for it.
Not sure what made me change it...
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* config/aarch64/aarch64-sve.md (aarch64_wrffr): Wrap the FFRT
output in UNSPEC_WRFFR.
From-SVN: r278356
This patch rewrites the index-based alias checks to use conditions
of the form:
(unsigned T) (a - b + bias) <= limit
E.g. before the patch:
struct s { int x[100]; };
void
f1 (struct s *s1, int a, int b)
{
for (int i = 0; i < 32; ++i)
s1->x[i + a] += s1->x[i + b];
}
used:
add w3, w1, 3
cmp w3, w2
add w3, w2, 3
ccmp w1, w3, 0, ge
ble .L2
whereas after the patch it uses:
sub w3, w1, w2
add w3, w3, 3
cmp w3, 6
bls .L2
The patch also fixes the seg_len1 and seg_len2 negation for cases in
which seg_len is a "negative unsigned" value narrower than 64 bits,
like it is for 32-bit targets. Previously we'd end up with values
like 0xffffffff000000001 instead of 1.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-data-ref.c (create_intersect_range_checks_index): Rewrite
the index tests to have the form (unsigned T) (B - A + bias) <= limit.
gcc/testsuite/
* gcc.dg/vect/vect-alias-check-18.c: New test.
* gcc.dg/vect/vect-alias-check-19.c: Likewise.
* gcc.dg/vect/vect-alias-check-20.c: Likewise.
From-SVN: r278354
This patch prints a message to say how an alias check is being
implemented.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-data-ref.c (create_intersect_range_checks_index)
(create_intersect_range_checks): Print dump messages.
gcc/testsuite/
* gcc.dg/vect/vect-alias-check-1.c: Test for the type of alias check.
* gcc.dg/vect/vect-alias-check-8.c: Likewise.
* gcc.dg/vect/vect-alias-check-9.c: Likewise.
* gcc.dg/vect/vect-alias-check-10.c: Likewise.
* gcc.dg/vect/vect-alias-check-11.c: Likewise.
* gcc.dg/vect/vect-alias-check-12.c: Likewise.
* gcc.dg/vect/vect-alias-check-13.c: Likewise.
* gcc.dg/vect/vect-alias-check-14.c: Likewise.
* gcc.dg/vect/vect-alias-check-15.c: Likewise.
* gcc.dg/vect/vect-alias-check-16.c: Likewise.
* gcc.dg/vect/vect-alias-check-17.c: Likewise.
From-SVN: r278353
This patch dumps the final (merged) list of alias pairs. It also adds:
- WAW and RAW versions of vect-alias-check-8.c
- a "well-ordered" version of vect-alias-check-9.c (i.e. all reads
before any writes)
- a test with mixed steps in the same alias pair
I also tweaked the test value in vect-alias-check-9.c so that the
result was less likely to be accidentally correct if the alias
isn't honoured.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-data-ref.c (dump_alias_pair): New function.
(prune_runtime_alias_test_list): Use it to dump each merged alias pair.
gcc/testsuite/
* gcc.dg/vect/vect-alias-check-8.c: Test for the RAW flag.
* gcc.dg/vect/vect-alias-check-9.c: Test for the ARBITRARY flag.
(TEST_VALUE): Use a higher value for early iterations.
* gcc.dg/vect/vect-alias-check-14.c: New test.
* gcc.dg/vect/vect-alias-check-15.c: Likewise.
* gcc.dg/vect/vect-alias-check-16.c: Likewise.
* gcc.dg/vect/vect-alias-check-17.c: Likewise.
From-SVN: r278352
prune_runtime_alias_test_list can merge dr_with_seg_len_pair_ts that
have different steps for the first reference or different steps for the
second reference. This patch adds a flag to record that.
I don't know whether the change to create_intersect_range_checks_index
fixes anything in practice. It would have to be a corner case if so,
since at present we only merge two alias pairs if either the first or
the second references are identical and only the other references differ.
And the vectoriser uses VF-based segment lengths only if both references
in a pair have the same step. Either way, it still seems wrong to use
DR_STEP when it doesn't represent all checks that have been merged into
the pair.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-data-ref.h (DR_ALIAS_MIXED_STEPS): New flag.
* tree-data-ref.c (prune_runtime_alias_test_list): Set it when
merging data references with different steps.
(create_intersect_range_checks_index): Take a
dr_with_seg_len_pair_t instead of two dr_with_seg_lens.
Bail out if DR_ALIAS_MIXED_STEPS is set.
(create_intersect_range_checks): Take a dr_with_seg_len_pair_t
instead of two dr_with_seg_lens. Update call to
create_intersect_range_checks_index.
(create_runtime_alias_checks): Update call accordingly.
From-SVN: r278351
This patch adds a bunch of flags to dr_with_seg_len_pair_t,
for use by later patches. The update to tree-loop-distribution.c
is conservatively correct, but might be tweakable later.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-data-ref.h (DR_ALIAS_RAW, DR_ALIAS_WAR, DR_ALIAS_WAW)
(DR_ALIAS_ARBITRARY, DR_ALIAS_SWAPPED, DR_ALIAS_UNSWAPPED): New flags.
(dr_with_seg_len_pair_t::sequencing): New enum.
(dr_with_seg_len_pair_t::flags): New member variable.
(dr_with_seg_len_pair_t::dr_with_seg_len_pair_t): Take a sequencing
parameter and initialize the flags member variable.
* tree-loop-distribution.c (compute_alias_check_pairs): Update
call accordingly.
* tree-vect-data-refs.c (vect_prune_runtime_alias_test_list): Likewise.
Ensure the two data references in an alias pair are in statement
order, if there is a defined order.
* tree-data-ref.c (prune_runtime_alias_test_list): Use
DR_ALIAS_SWAPPED and DR_ALIAS_UNSWAPPED to record whether we've
swapped the references in a dr_with_seg_len_pair_t. OR together
the flags when merging two dr_with_seg_len_pair_ts. After merging,
try to restore the original dr_with_seg_len order, updating the
flags if that fails.
From-SVN: r278350
prune_runtime_alias_test_list swapped dr_as between two dr_with_seg_len
pairs before finally deciding whether to merge them. Bailing out later
would therefore leave the pairs in an incorrect state.
IMO a better fix would be to split this out into a subroutine that
produces a temporary dr_with_seg_len on success, rather than changing
an existing one in-place. It would then be easy to merge both the dr_as
and dr_bs if we wanted to, rather than requiring one of them to be equal.
But here I tried to do something that could be backported if necessary.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-data-ref.c (prune_runtime_alias_test_list): Delay
swapping the dr_as based on init values until we've decided
whether to merge them.
From-SVN: r278349
The two users of tree-data-ref's runtime alias checks both canonicalise
the order of the dr_with_seg_lens in a pair before passing them to
prune_runtime_alias_test_list. It's more convenient for later patches
if prune_runtime_alias_test_list does that itself.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-data-ref.c (prune_runtime_alias_test_list): Sort the
two accesses in each dr_with_seg_len_pair_t before trying to
combine separate dr_with_seg_len_pair_ts.
* tree-loop-distribution.c (compute_alias_check_pairs): Don't do
that here.
* tree-vect-data-refs.c (vect_prune_runtime_alias_test_list): Likewise.
From-SVN: r278348
This patch adds support for scatter stores of partial vectors,
where the vector base or offset elements can be wider than the
elements being stored.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* config/aarch64/aarch64-sve.md
(scatter_store<SVE_FULL_SD:mode><v_int_equiv>): Extend to...
(scatter_store<SVE_24:mode><v_int_container>): ...this.
(mask_scatter_store<SVE_FULL_S:mode><v_int_equiv>): Extend to...
(mask_scatter_store<SVE_4:mode><v_int_equiv>): ...this.
(mask_scatter_store<SVE_FULL_D:mode><v_int_equiv>): Extend to...
(mask_scatter_store<SVE_2:mode><v_int_equiv>): ...this.
(*mask_scatter_store<mode><v_int_container>_<su>xtw_unpacked): New
pattern.
(*mask_scatter_store<SVE_FULL_D:mode><v_int_equiv>_sxtw): Extend to...
(*mask_scatter_store<SVE_2:mode><v_int_equiv>_sxtw): ...this.
(*mask_scatter_store<SVE_FULL_D:mode><v_int_equiv>_uxtw): Extend to...
(*mask_scatter_store<SVE_2:mode><v_int_equiv>_uxtw): ...this.
gcc/testsuite/
* gcc.target/aarch64/sve/scatter_store_1.c (TEST_LOOP): Start at 0.
(TEST_ALL): Add tests for 8-bit and 16-bit elements.
* gcc.target/aarch64/sve/scatter_store_2.c: Update accordingly.
* gcc.target/aarch64/sve/scatter_store_3.c (TEST_LOOP): Start at 0.
(TEST_ALL): Add tests for 8-bit and 16-bit elements.
* gcc.target/aarch64/sve/scatter_store_4.c: Update accordingly.
* gcc.target/aarch64/sve/scatter_store_5.c (TEST_LOOP): Start at 0.
(TEST_ALL): Add tests for 8-bit, 16-bit and 32-bit elements.
* gcc.target/aarch64/sve/scatter_store_8.c: New test.
* gcc.target/aarch64/sve/scatter_store_9.c: Likewise.
From-SVN: r278347
This patch pattern-matches a partial gather load followed by a sign or
zero extension into an extending gather load. (The partial gather load
is already an extending load; we just don't rely on the upper bits of
the elements.)
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* config/aarch64/iterators.md (SVE_2BHSI, SVE_2HSDI, SVE_4BHI)
(SVE_4HSI): New mode iterators.
(ANY_EXTEND2): New code iterator.
* config/aarch64/aarch64-sve.md
(@aarch64_gather_load_<ANY_EXTEND:optab><VNx4_WIDE:mode><VNx4_NARROW:mode>):
Extend to...
(@aarch64_gather_load_<ANY_EXTEND:optab><SVE_4HSI:mode><SVE_4BHI:mode>):
...this, handling extension to partial modes as well as full modes.
Describe the extension as a predicated rather than unpredicated
extension.
(@aarch64_gather_load_<ANY_EXTEND:optab><VNx2_WIDE:mode><VNx2_NARROW:mode>):
Likewise extend to...
(@aarch64_gather_load_<ANY_EXTEND:optab><SVE_2HSDI:mode><SVE_2BHSI:mode>):
...this, making the same adjustments.
(*aarch64_gather_load_<ANY_EXTEND:optab><VNx2_WIDE:mode><VNx2_NARROW:mode>_sxtw):
Likewise extend to...
(*aarch64_gather_load_<ANY_EXTEND:optab><SVE_2HSDI:mode><SVE_2BHSI:mode>_sxtw)
...this, making the same adjustments.
(*aarch64_gather_load_<ANY_EXTEND:optab><VNx2_WIDE:mode><VNx2_NARROW:mode>_uxtw):
Likewise extend to...
(*aarch64_gather_load_<ANY_EXTEND:optab><SVE_2HSDI:mode><SVE_2BHSI:mode>_uxtw)
...this, making the same adjustments.
(*aarch64_gather_load_<ANY_EXTEND:optab><SVE_2HSDI:mode><SVE_2BHSI:mode>_<ANY_EXTEND2:su>xtw_unpacked):
New pattern.
(*aarch64_ldff1_gather<mode>_sxtw): Canonicalize to a constant
extension predicate.
(@aarch64_ldff1_gather_<ANY_EXTEND:optab><VNx4_WIDE:mode><VNx4_NARROW:mode>)
(@aarch64_ldff1_gather_<ANY_EXTEND:optab><VNx2_WIDE:mode><VNx2_NARROW:mode>)
(*aarch64_ldff1_gather_<ANY_EXTEND:optab><VNx2_WIDE:mode><VNx2_NARROW:mode>_uxtw):
Describe the extension as a predicated rather than unpredicated
extension.
(*aarch64_ldff1_gather_<ANY_EXTEND:optab><VNx2_WIDE:mode><VNx2_NARROW:mode>_sxtw):
Likewise. Canonicalize to a constant extension predicate.
* config/aarch64/aarch64-sve-builtins-base.cc
(svld1_gather_extend_impl::expand): Add an extra predicate for
the extension.
(svldff1_gather_extend_impl::expand): Likewise.
gcc/testsuite/
* gcc.target/aarch64/sve/gather_load_extend_1.c: New test.
* gcc.target/aarch64/sve/gather_load_extend_2.c: Likewise.
* gcc.target/aarch64/sve/gather_load_extend_3.c: Likewise.
* gcc.target/aarch64/sve/gather_load_extend_4.c: Likewise.
* gcc.target/aarch64/sve/gather_load_extend_5.c: Likewise.
* gcc.target/aarch64/sve/gather_load_extend_6.c: Likewise.
* gcc.target/aarch64/sve/gather_load_extend_7.c: Likewise.
* gcc.target/aarch64/sve/gather_load_extend_8.c: Likewise.
* gcc.target/aarch64/sve/gather_load_extend_9.c: Likewise.
* gcc.target/aarch64/sve/gather_load_extend_10.c: Likewise.
* gcc.target/aarch64/sve/gather_load_extend_11.c: Likewise.
* gcc.target/aarch64/sve/gather_load_extend_12.c: Likewise.
From-SVN: r278346
This patch adds support for gather loads of partial vectors,
where the vector base or offset elements can be wider than the
elements being loaded.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* config/aarch64/iterators.md (SVE_24, SVE_2, SVE_4): New mode
iterators.
* config/aarch64/aarch64-sve.md
(gather_load<SVE_FULL_SD:mode><v_int_equiv>): Extend to...
(gather_load<SVE_24:mode><v_int_container>): ...this.
(mask_gather_load<SVE_FULL_S:mode><v_int_equiv>): Extend to...
(mask_gather_load<SVE_4:mode><v_int_container>): ...this.
(mask_gather_load<SVE_FULL_D:mode><v_int_equiv>): Extend to...
(mask_gather_load<SVE_2:mode><v_int_container>): ...this.
(*mask_gather_load<SVE_2:mode><v_int_container>_<su>xtw_unpacked):
New pattern.
(*mask_gather_load<SVE_FULL_D:mode><v_int_equiv>_sxtw): Extend to...
(*mask_gather_load<SVE_2:mode><v_int_equiv>_sxtw): ...this.
Allow the nominal extension predicate to be different from the
load predicate.
(*mask_gather_load<SVE_FULL_D:mode><v_int_equiv>_uxtw): Extend to...
(*mask_gather_load<SVE_2:mode><v_int_equiv>_uxtw): ...this.
gcc/testsuite/
* gcc.target/aarch64/sve/gather_load_1.c (TEST_LOOP): Start at 0.
(TEST_ALL): Add tests for 8-bit and 16-bit elements.
* gcc.target/aarch64/sve/gather_load_2.c: Update accordingly.
* gcc.target/aarch64/sve/gather_load_3.c (TEST_LOOP): Start at 0.
(TEST_ALL): Add tests for 8-bit and 16-bit elements.
* gcc.target/aarch64/sve/gather_load_4.c: Update accordingly.
* gcc.target/aarch64/sve/gather_load_5.c (TEST_LOOP): Start at 0.
(TEST_ALL): Add tests for 8-bit, 16-bit and 32-bit elements.
* gcc.target/aarch64/sve/gather_load_6.c: Add
--param aarch64-sve-compare-costs=0.
(TEST_LOOP): Start at 0.
* gcc.target/aarch64/sve/gather_load_7.c: Add
--param aarch64-sve-compare-costs=0.
* gcc.target/aarch64/sve/gather_load_8.c: New test.
* gcc.target/aarch64/sve/gather_load_9.c: Likewise.
* gcc.target/aarch64/sve/mask_gather_load_6.c: Add
--param aarch64-sve-compare-costs=0.
From-SVN: r278345
This patch adds support for "truncating" to a partial SVE vector from
either a full SVE vector or a wider partial vector. This truncation is
actually a no-op and so should have zero cost in the vector cost model.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* config/aarch64/aarch64-sve.md
(trunc<SVE_HSDI:mode><SVE_PARTIAL_I:mode>2): New pattern.
* config/aarch64/aarch64.c (aarch64_integer_truncation_p): New
function.
(aarch64_sve_adjust_stmt_cost): Call it.
gcc/testsuite/
* gcc.target/aarch64/sve/mask_struct_load_1.c: Add
--param aarch64-sve-compare-costs=0.
* gcc.target/aarch64/sve/mask_struct_load_2.c: Likewise.
* gcc.target/aarch64/sve/mask_struct_load_3.c: Likewise.
* gcc.target/aarch64/sve/mask_struct_load_4.c: Likewise.
* gcc.target/aarch64/sve/mask_struct_load_5.c: Likewise.
* gcc.target/aarch64/sve/pack_1.c: Likewise.
* gcc.target/aarch64/sve/truncate_1.c: New test.
From-SVN: r278344
This patch pattern-matches a partial SVE load followed by a sign or zero
extension into an extending load. (The partial load is already an
extending load; we just don't rely on the upper bits of the elements.)
Nothing yet uses the extra LDFF1 and LDNF1 combinations, but it seemed
more consistent to provide them, since I needed to update the pattern
to use a predicated extension anyway.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* config/aarch64/aarch64-sve.md
(@aarch64_load_<ANY_EXTEND:optab><VNx8_WIDE:mode><VNx8_NARROW:mode>):
(@aarch64_load_<ANY_EXTEND:optab><VNx4_WIDE:mode><VNx4_NARROW:mode>)
(@aarch64_load_<ANY_EXTEND:optab><VNx2_WIDE:mode><VNx2_NARROW:mode>):
Combine into...
(@aarch64_load_<ANY_EXTEND:optab><SVE_HSDI:mode><SVE_PARTIAL_I:mode>):
...this new pattern, handling extension to partial modes as well
as full modes. Describe the extension as a predicated rather than
unpredicated extension.
(@aarch64_ld<fn>f1_<ANY_EXTEND:optab><VNx8_WIDE:mode><VNx8_NARROW:mode>)
(@aarch64_ld<fn>f1_<ANY_EXTEND:optab><VNx4_WIDE:mode><VNx4_NARROW:mode>)
(@aarch64_ld<fn>f1_<ANY_EXTEND:optab><VNx2_WIDE:mode><VNx2_NARROW:mode>):
Combine into...
(@aarch64_ld<fn>f1_<ANY_EXTEND:optab><SVE_HSDI:mode><SVE_PARTIAL_I:mode>):
...this new pattern, handling extension to partial modes as well
as full modes. Describe the extension as a predicated rather than
unpredicated extension.
* config/aarch64/aarch64-sve-builtins.cc
(function_expander::use_contiguous_load_insn): Add an extra
predicate for extending loads.
* config/aarch64/aarch64.c (aarch64_extending_load_p): New function.
(aarch64_sve_adjust_stmt_cost): Likewise.
(aarch64_add_stmt_cost): Use aarch64_sve_adjust_stmt_cost to adjust
the cost of SVE vector stmts.
gcc/testsuite/
* gcc.target/aarch64/sve/load_extend_1.c: New test.
* gcc.target/aarch64/sve/load_extend_2.c: Likewise.
* gcc.target/aarch64/sve/load_extend_3.c: Likewise.
* gcc.target/aarch64/sve/load_extend_4.c: Likewise.
* gcc.target/aarch64/sve/load_extend_5.c: Likewise.
* gcc.target/aarch64/sve/load_extend_6.c: Likewise.
* gcc.target/aarch64/sve/load_extend_7.c: Likewise.
* gcc.target/aarch64/sve/load_extend_8.c: Likewise.
* gcc.target/aarch64/sve/load_extend_9.c: Likewise.
* gcc.target/aarch64/sve/load_extend_10.c: Likewise.
* gcc.target/aarch64/sve/reduc_4.c: Add
--param aarch64-sve-compare-costs=0.
From-SVN: r278343
This patch adds support for extending from partial SVE modes
to both full vector modes and wider partial modes.
Some tests now need --param aarch64-sve-compare-costs=0 to force
the original full-vector code.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* config/aarch64/iterators.md (SVE_HSDI): New mode iterator.
(narrower_mask): Handle VNx4HI, VNx2HI and VNx2SI.
* config/aarch64/aarch64-sve.md
(<ANY_EXTEND:optab><SVE_PARTIAL_I:mode><SVE_HSDI:mode>2): New pattern.
(*<ANY_EXTEND:optab><SVE_PARTIAL_I:mode><SVE_HSDI:mode>2): Likewise.
(@aarch64_pred_sxt<SVE_FULL_HSDI:mode><SVE_PARTIAL_I:mode>): Update
comment. Avoid new narrower_mask ambiguity.
(@aarch64_cond_sxt<SVE_FULL_HSDI:mode><SVE_PARTIAL_I:mode>): Likewise.
(*cond_uxt<mode>_2): Update comment.
(*cond_uxt<mode>_any): Likewise.
gcc/testsuite/
* gcc.target/aarch64/sve/cost_model_1.c: Expect the loop to be
vectorized with bytes stored in 32-bit containers.
* gcc.target/aarch64/sve/extend_1.c: New test.
* gcc.target/aarch64/sve/extend_2.c: New test.
* gcc.target/aarch64/sve/extend_3.c: New test.
* gcc.target/aarch64/sve/extend_4.c: New test.
* gcc.target/aarch64/sve/load_const_offset_3.c: Add
--param aarch64-sve-compare-costs=0.
* gcc.target/aarch64/sve/mask_struct_store_1.c: Likewise.
* gcc.target/aarch64/sve/mask_struct_store_1_run.c: Likewise.
* gcc.target/aarch64/sve/mask_struct_store_2.c: Likewise.
* gcc.target/aarch64/sve/mask_struct_store_2_run.c: Likewise.
* gcc.target/aarch64/sve/unpack_unsigned_1.c: Likewise.
* gcc.target/aarch64/sve/unpack_unsigned_1_run.c: Likewise.
From-SVN: r278342
This patch adds the bare minimum needed to support autovectorisation of
partial SVE vectors, namely moves and integer addition. Later patches
add more interesting cases.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* config/aarch64/aarch64-modes.def: Define partial SVE vector
float modes.
* config/aarch64/aarch64-protos.h (aarch64_sve_pred_mode): New
function.
* config/aarch64/aarch64.c (aarch64_classify_vector_mode): Handle the
new vector float modes.
(aarch64_sve_container_bits): New function.
(aarch64_sve_pred_mode): Likewise.
(aarch64_get_mask_mode): Use it.
(aarch64_sve_element_int_mode): Handle structure modes and partial
modes.
(aarch64_sve_container_int_mode): New function.
(aarch64_vectorize_related_mode): Return SVE modes when given
SVE modes. Handle partial modes, taking the preferred number
of units from the size of the given mode.
(aarch64_hard_regno_mode_ok): Allow partial modes to be stored
in registers.
(aarch64_expand_sve_ld1rq): Use the mode form of aarch64_sve_pred_mode.
(aarch64_expand_sve_const_vector): Handle partial SVE vectors.
(aarch64_split_sve_subreg_move): Use the mode form of
aarch64_sve_pred_mode.
(aarch64_secondary_reload): Handle partial modes in the same way
as full big-endian vectors.
(aarch64_vector_mode_supported_p): Allow partial SVE vectors.
(aarch64_autovectorize_vector_modes): Try unpacked SVE vectors,
merging with the Advanced SIMD modes. If two modes have the
same size, try the Advanced SIMD mode first.
(aarch64_simd_valid_immediate): Use the container rather than
the element mode for INDEX constants.
(aarch64_simd_vector_alignment): Make the alignment of partial
SVE vector modes the same as their minimum size.
(aarch64_evpc_sel): Use the mode form of aarch64_sve_pred_mode.
* config/aarch64/aarch64-sve.md (mov<SVE_FULL:mode>): Extend to...
(mov<SVE_ALL:mode>): ...this.
(movmisalign<SVE_FULL:mode>): Extend to...
(movmisalign<SVE_ALL:mode>): ...this.
(*aarch64_sve_mov<mode>_le): Rename to...
(*aarch64_sve_mov<mode>_ldr_str): ...this.
(*aarch64_sve_mov<SVE_FULL:mode>_be): Rename and extend to...
(*aarch64_sve_mov<SVE_ALL:mode>_no_ldr_str): ...this. Handle
partial modes regardless of endianness.
(aarch64_sve_reload_be): Rename to...
(aarch64_sve_reload_mem): ...this and enable for little-endian.
Use aarch64_sve_pred_mode to get the appropriate predicate mode.
(@aarch64_pred_mov<SVE_FULL:mode>): Extend to...
(@aarch64_pred_mov<SVE_ALL:mode>): ...this.
(*aarch64_sve_mov<SVE_FULL:mode>_subreg_be): Extend to...
(*aarch64_sve_mov<SVE_ALL:mode>_subreg_be): ...this.
(@aarch64_sve_reinterpret<SVE_FULL:mode>): Extend to...
(@aarch64_sve_reinterpret<SVE_ALL:mode>): ...this.
(*aarch64_sve_reinterpret<SVE_FULL:mode>): Extend to...
(*aarch64_sve_reinterpret<SVE_ALL:mode>): ...this.
(maskload<SVE_FULL:mode><vpred>): Extend to...
(maskload<SVE_ALL:mode><vpred>): ...this.
(maskstore<SVE_FULL:mode><vpred>): Extend to...
(maskstore<SVE_ALL:mode><vpred>): ...this.
(vec_duplicate<SVE_FULL:mode>): Extend to...
(vec_duplicate<SVE_ALL:mode>): ...this.
(*vec_duplicate<SVE_FULL:mode>_reg): Extend to...
(*vec_duplicate<SVE_ALL:mode>_reg): ...this.
(sve_ld1r<SVE_FULL:mode>): Extend to...
(sve_ld1r<SVE_ALL:mode>): ...this.
(vec_series<SVE_FULL_I:mode>): Extend to...
(vec_series<SVE_I:mode>): ...this.
(*vec_series<SVE_FULL_I:mode>_plus): Extend to...
(*vec_series<SVE_I:mode>_plus): ...this.
(@aarch64_pred_sxt<SVE_FULL_HSDI:mode><SVE_PARTIAL_I:mode>): Avoid
new VPRED ambiguity.
(@aarch64_cond_sxt<SVE_FULL_HSDI:mode><SVE_PARTIAL_I:mode>): Likewise.
(add<SVE_FULL_I:mode>3): Extend to...
(add<SVE_I:mode>3): ...this.
* config/aarch64/iterators.md (SVE_ALL, SVE_I): New mode iterators.
(Vetype, Vesize, VEL, Vel, vwcore): Handle partial SVE vector modes.
(VPRED, vpred): Likewise.
(Vctype): New iterator.
(vw): Remove SVE modes.
gcc/testsuite/
* gcc.target/aarch64/sve/mixed_size_1.c: New test.
* gcc.target/aarch64/sve/mixed_size_2.c: Likewise.
* gcc.target/aarch64/sve/mixed_size_3.c: Likewise.
* gcc.target/aarch64/sve/mixed_size_4.c: Likewise.
* gcc.target/aarch64/sve/mixed_size_5.c: Likewise.
From-SVN: r278341
clastb_8.c was using scan-tree-dump-times to check for fully-masked
loops, which made it sensitive to the number of times we try to
vectorize.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/testsuite/
* gcc.target/aarch64/sve/clastb_8.c: Use assembly tests to
check for fully-masked loops.
From-SVN: r278340
Another renaming, this time to make way for partial/unpacked
float modes.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* config/aarch64/iterators.md (SVE_PARTIAL): Rename to...
(SVE_PARTIAL_I): ...this.
* config/aarch64/aarch64-sve.md: Apply the above renaming throughout.
From-SVN: r278339
An upcoming patch will make more use of partial/unpacked SVE vectors.
We then need a distinction between mode iterators that include partial
modes and those that only include "full" modes. This patch prepares
for that by adding "FULL" to the names of iterators that only select
full modes. There should be no change in behaviour.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* config/aarch64/iterators.md (SVE_ALL): Rename to...
(SVE_FULL): ...this.
(SVE_I): Rename to...
(SVE_FULL_I): ...this.
(SVE_F): Rename to...
(SVE_FULL_F): ...this.
(SVE_BHSI): Rename to...
(SVE_FULL_BHSI): ...this.
(SVE_HSD): Rename to...
(SVE_FULL_HSD): ...this.
(SVE_HSDI): Rename to...
(SVE_FULL_HSDI): ...this.
(SVE_HSF): Rename to...
(SVE_FULL_HSF): ...this.
(SVE_SD): Rename to...
(SVE_FULL_SD): ...this.
(SVE_SDI): Rename to...
(SVE_FULL_SDI): ...this.
(SVE_SDF): Rename to...
(SVE_FULL_SDF): ...this.
(SVE_S): Rename to...
(SVE_FULL_S): ...this.
(SVE_D): Rename to...
(SVE_FULL_D): ...this.
* config/aarch64/aarch64-sve.md: Apply the above renaming throughout.
* config/aarch64/aarch64-sve2.md: Likewise.
From-SVN: r278338
This patch enables VECT_COMPARE_COSTS by default for SVE, both so
that we can compare SVE against Advanced SIMD and so that (with future
patches) we can compare multiple SVE vectorisation approaches against
each other. It also adds a target-specific --param to control this.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* config/aarch64/aarch64.opt (--param=aarch64-sve-compare-costs):
New option.
* doc/invoke.texi: Document it.
* config/aarch64/aarch64.c (aarch64_autovectorize_vector_modes):
By default, return VECT_COMPARE_COSTS for SVE.
gcc/testsuite/
* gcc.target/aarch64/sve/reduc_3.c: Split multi-vector cases out
into...
* gcc.target/aarch64/sve/reduc_3_costly.c: ...this new test,
passing -fno-vect-cost-model for them.
* gcc.target/aarch64/sve/slp_6.c: Add -fno-vect-cost-model.
* gcc.target/aarch64/sve/slp_7.c,
* gcc.target/aarch64/sve/slp_7_run.c: Split multi-vector cases out
into...
* gcc.target/aarch64/sve/slp_7_costly.c,
* gcc.target/aarch64/sve/slp_7_costly_run.c: ...these new tests,
passing -fno-vect-cost-model for them.
* gcc.target/aarch64/sve/while_7.c: Add -fno-vect-cost-model.
* gcc.target/aarch64/sve/while_9.c: Likewise.
From-SVN: r278337
This patch adds a mode in which the vectoriser tries each available
base vector mode and picks the one with the lowest cost. The new
behaviour is selected by autovectorize_vector_modes.
The patch keeps the current behaviour of preferring a VF of
loop->simdlen over any larger or smaller VF, regardless of costs
or target preferences.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* target.h (VECT_COMPARE_COSTS): New constant.
* target.def (autovectorize_vector_modes): Return a bitmask of flags.
* doc/tm.texi: Regenerate.
* targhooks.h (default_autovectorize_vector_modes): Update accordingly.
* targhooks.c (default_autovectorize_vector_modes): Likewise.
* config/aarch64/aarch64.c (aarch64_autovectorize_vector_modes):
Likewise.
* config/arc/arc.c (arc_autovectorize_vector_modes): Likewise.
* config/arm/arm.c (arm_autovectorize_vector_modes): Likewise.
* config/i386/i386.c (ix86_autovectorize_vector_modes): Likewise.
* config/mips/mips.c (mips_autovectorize_vector_modes): Likewise.
* tree-vectorizer.h (_loop_vec_info::vec_outside_cost)
(_loop_vec_info::vec_inside_cost): New member variables.
* tree-vect-loop.c (_loop_vec_info::_loop_vec_info): Initialize them.
(vect_better_loop_vinfo_p, vect_joust_loop_vinfos): New functions.
(vect_analyze_loop): When autovectorize_vector_modes returns
VECT_COMPARE_COSTS, try vectorizing the loop with each available
vector mode and picking the one with the lowest cost.
(vect_estimate_min_profitable_iters): Record the computed costs
in the loop_vec_info.
From-SVN: r278336
This patch makes can_duplicate_and_interleave_p cope with mixtures of
vector sizes, by using queries based on get_vectype_for_scalar_type
instead of directly querying GET_MODE_SIZE (vinfo->vector_mode).
int_mode_for_size is now the first check we do for a candidate mode,
so it seemed better to restrict it to MAX_FIXED_MODE_SIZE. This avoids
unnecessary work and avoids trying to create scalar types that the
target might not support.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vectorizer.h (can_duplicate_and_interleave_p): Take an
element type rather than an element mode.
* tree-vect-slp.c (can_duplicate_and_interleave_p): Likewise.
Use get_vectype_for_scalar_type to query the natural types
for a given element type rather than basing everything on
GET_MODE_SIZE (vinfo->vector_mode). Limit int_mode_for_size
query to MAX_FIXED_MODE_SIZE.
(duplicate_and_interleave): Update call accordingly.
* tree-vect-loop.c (vectorizable_reduction): Likewise.
From-SVN: r278335
The BB vectoriser picked vector types in the same way as the loop
vectoriser: it picked a vector mode/size for the region and then
based all the vector types off that choice. This meant we could
end up trying to use vector types that had too many elements for
the group size.
The main part of this patch is therefore about passing the SLP
group size down to routines like get_vectype_for_scalar_type and
ensuring that each vector type in the SLP tree is chosen wrt the
group size. That part in itself is pretty easy and mechanical.
The main warts are:
(1) We normally pick a STMT_VINFO_VECTYPE for data references at an
early stage (vect_analyze_data_refs). However, nothing in the
BB vectoriser relied on this, or on the min_vf calculated from it.
I couldn't see anything other than vect_recog_bool_pattern that
tried to access the vector type before the SLP tree is built.
(2) It's possible for the same statement to be used in groups of
different sizes. Taking the group size into account meant that
we could try to pick different vector types for the same statement.
This problem should go away with the move to doing everything on
SLP trees, where presumably we would attach the vector type to the
SLP node rather than the stmt_vec_info. Until then, the patch just
uses a first-come, first-served approach.
(3) A similar problem exists for grouped data references, where
different statements in the same dataref group could be used
in SLP nodes that have different group sizes. The patch copes
with that by making sure that all vector types in a dataref
group remain consistent.
The patch means that:
void
f (int *x, short *y)
{
x[0] += y[0];
x[1] += y[1];
x[2] += y[2];
x[3] += y[3];
}
now produces:
ldr q0, [x0]
ldr d1, [x1]
saddw v0.4s, v0.4s, v1.4h
str q0, [x0]
ret
instead of:
ldrsh w2, [x1]
ldrsh w3, [x1, 2]
fmov s0, w2
ldrsh w2, [x1, 4]
ldrsh w1, [x1, 6]
ins v0.s[1], w3
ldr q1, [x0]
ins v0.s[2], w2
ins v0.s[3], w1
add v0.4s, v0.4s, v1.4s
str q0, [x0]
ret
Unfortunately it also means we start to vectorise
gcc.target/i386/pr84101.c for -m32. That seems like a target
cost issue though; see PR92265 for details.
2019-11-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vectorizer.h (vect_get_vector_types_for_stmt): Take an
optional maximum nunits.
(get_vectype_for_scalar_type): Likewise. Also declare a form that
takes an slp_tree.
(get_mask_type_for_scalar_type): Take an optional slp_tree.
(vect_get_mask_type_for_stmt): Likewise.
* tree-vect-data-refs.c (vect_analyze_data_refs): Don't store
the vector type in STMT_VINFO_VECTYPE for BB vectorization.
* tree-vect-patterns.c (vect_recog_bool_pattern): Use
vect_get_vector_types_for_stmt instead of STMT_VINFO_VECTYPE
to get an assumed vector type for data references.
* tree-vect-slp.c (vect_update_shared_vectype): New function.
(vect_update_all_shared_vectypes): Likewise.
(vect_build_slp_tree_1): Pass the group size to
vect_get_vector_types_for_stmt. Use vect_update_shared_vectype
for BB vectorization.
(vect_build_slp_tree_2): Call vect_update_all_shared_vectypes
before building the vectof from scalars.
(vect_analyze_slp_instance): Pass the group size to
get_vectype_for_scalar_type.
(vect_slp_analyze_node_operations_1): Don't recompute the vector
types for BB vectorization here; just handle the case in which
we deferred the choice for booleans.
(vect_get_constant_vectors): Pass the slp_tree to
get_vectype_for_scalar_type.
* tree-vect-stmts.c (vect_prologue_cost_for_slp_op): Likewise.
(vectorizable_call): Likewise.
(vectorizable_simd_clone_call): Likewise.
(vectorizable_conversion): Likewise.
(vectorizable_shift): Likewise.
(vectorizable_operation): Likewise.
(vectorizable_comparison): Likewise.
(vect_is_simple_cond): Take the slp_tree as argument and
pass it to get_vectype_for_scalar_type.
(vectorizable_condition): Update call accordingly.
(get_vectype_for_scalar_type): Take a group_size argument.
For BB vectorization, limit the the vector to that number
of elements. Also define an overload that takes an slp_tree.
(get_mask_type_for_scalar_type): Add an slp_tree argument and
pass it to get_vectype_for_scalar_type.
(vect_get_vector_types_for_stmt): Add a group_size argument
and pass it to get_vectype_for_scalar_type. Don't use the
cached vector type for BB vectorization if a group size is given.
Handle data references in that case.
(vect_get_mask_type_for_stmt): Take an slp_tree argument and
pass it to get_mask_type_for_scalar_type.
gcc/testsuite/
* gcc.dg/vect/bb-slp-4.c: Expect the block to be vectorized
with -fno-vect-cost-model.
* gcc.dg/vect/bb-slp-bool-1.c: New test.
* gcc.target/aarch64/vect_mixed_sizes_14.c: Likewise.
* gcc.target/i386/pr84101.c: XFAIL for -m32.
From-SVN: r278334
* include/std/stop_token: Reduce header dependencies by including
internal headers.
(stop_token::swap(stop_token&), swap(stop_token&, stop_token&)):
Define.
(operator!=(const stop_token&, const stop_token&)): Fix return value.
(stop_token::_Stop_cb::_Stop_cb(Cb&&)): Use std::forward instead of
(stop_token::_Stop_state_t) [_GLIBCXX_HAS_GTHREADS]: Use lock_guard
instead of unique_lock.
[!_GLIBCXX_HAS_GTHREADS]: Do not use mutex.
(stop_token::stop_token(_Stop_state)): Change parameter to lvalue
reference.
(stop_source): Remove unnecessary using-declarations for names only
used once.
(swap(stop_source&, stop_source&)): Define.
(stop_callback(const stop_token&, _Cb&&))
(stop_callback(stop_token&&, _Cb&&)): Replace lambdas with a named
function. Use std::forward instead of std::move. Run callbacks if a
stop request has already been made.
(stop_source::_M_execute()): Remove.
(stop_source::_S_execute(_Stop_cb*)): Define.
* include/std/version (__cpp_lib_jthread): Define conditionally.
* testsuite/30_threads/stop_token/stop_callback.cc: New test.
* testsuite/30_threads/stop_token/stop_source.cc: New test.
* testsuite/30_threads/stop_token/stop_token.cc: Enable test for
immediate execution of callback.
From-SVN: r278325
For each of the attributes currently included in C2x, it has a
constraint that the attribute shall appear at most once in each
attribute list (attribute-list being what appear between a single [[
and ]]).
This patch implements that check. As the corresponding check in the
C++ front end (cp_parser_check_std_attribute) makes violations into
errors, I made them into errors, with the same wording, for C as well.
There is an existing check in the case of the fallthrough attribute,
with a warning rather than an error, in attribute_fallthrough_p. That
is more general, as it also covers __attribute__ ((fallthrough)) and
the case of [[fallthrough]] [[fallthrough]] (multiple attribute-lists
in a single attribute-specifier-sequence), which is not a constraint
violation. To avoid some [[fallthrough, fallthrough]] being diagnosed
twice, the check I added avoids adding duplicate attributes to the
list.
Bootstrapped with no regressions on x86_64-pc-linux-gnu.
gcc/c:
* c-parser.c (c_parser_std_attribute_specifier): Diagnose
duplicate standard attributes.
gcc/testsuite:
* gcc.dg/c2x-attr-deprecated-4.c, gcc.dg/c2x-attr-fallthrough-4.c,
gcc.dg/c2x-attr-maybe_unused-4.c: New tests.
From-SVN: r278324
The change approved in Belfast did not actually rename the concept from
std::default_constructible to std::default_initializable, even though
that was intended. That is expected to be done soon as a separate issue,
so I'm implementing that now too.
* include/bits/iterator_concepts.h (weakly_incrementable): Adjust.
* include/std/concepts (default_constructible): Rename to
default_initializable and require default-list-initialization and
default-initialization to be valid (LWG 3149).
(semiregular): Adjust to new name.
* testsuite/std/concepts/concepts.lang/concept.defaultconstructible/
1.cc: Rename directory to concept.defaultinitializable and adjust to
new name.
* testsuite/std/concepts/concepts.lang/concept.defaultinitializable/
lwg3149.cc: New test.
* testsuite/util/testsuite_iterators.h (test_range): Adjust.
From-SVN: r278314
* src/c++17/fs_path.cc [_GLIBCXX_FILESYSTEM_IS_WINDOWS]
(is_disk_designator): New helper function.
(path::_Parser::root_path()): Use is_disk_designator.
(path::lexically_relative(const path&)): Implement resolution of
LWG 3070.
* testsuite/27_io/filesystem/path/generation/relative.cc: Check with
path components that look like a root-name.
From-SVN: r278313
Add the dynamic linker name and fix a type name to use the public name
instead of the glibc internal name.
gcc/ChangeLog:
2019-11-15 Szabolcs Nagy <szabolcs.nagy@arm.com>
* config/m68k/linux.h (MUSL_DYNAMIC_LINKER): Define.
libgcc/ChangeLog:
2019-11-15 Szabolcs Nagy <szabolcs.nagy@arm.com>
* config/m68k/linux-unwind.h (struct uw_ucontext): Use sigset_t instead
of __sigset_t.
From-SVN: r278312
This patch adds support for the C2x [[maybe_unused]] attribute, using
the same handler as for GNU __attribute__ ((unused)).
As with other such attribute support, I think turning certain warnings
into pedwarns for usage in cases where that is a constraint violation
can be addressed later as a bug fix, as can the C2x constraint for
various standard attributes that they do not appear more than once
inside a single [[]].
However, the warnings that appear in c2x-attr-maybe_unused-1.c (that
the attribute is ignored on member declarations) need to remain as
warnings not pedwarns, since C2x does permit the attribute there. (Or
they could be silenced, on the basis that GCC doesn't have warnings
for unused struct and union members so it's completely harmless that
it's ignoring an attribute that might do something useful with another
compiler that does have such warnings.)
Bootstrapped with no regressions on x86_64-pc-linux-gnu.
gcc/c:
* c-decl.c (std_attribute_table): Add maybe_unused.
gcc/testsuite:
* gcc.dg/c2x-attr-maybe_unused-1.c,
gcc.dg/c2x-attr-maybe_unused-2.c,
gcc.dg/c2x-attr-maybe_unused-3.c: New tests.
From-SVN: r278310
