This test needs to be built with -G0 on nios2 to avoid treating the array
as small data.
2021-12-16 Sandra Loosemore <sandra@codesourcery.com>
gcc/testsuite/
* gcc.dg/20021029-1.c: Build with -G0 for nios2.
Some time ago I noticed that we don't properly delay parsing of
noexcept for member function templates. This patch fixes that.
It didn't work because even though we set CP_PARSER_FLAGS_DELAY_NOEXCEPT
in cp_parser_member_declaration, member template declarations take
a different path: we call cp_parser_template_declaration and return
prior to setting the flag.
PR c++/99980
gcc/cp/ChangeLog:
* parser.c (cp_parser_single_declaration): Maybe pass
CP_PARSER_FLAGS_DELAY_NOEXCEPT down to cp_parser_init_declarator.
gcc/testsuite/ChangeLog:
* g++.dg/cpp0x/noexcept71.C: New test.
Resolves:
PR c++/103703 - ICE with -Wmismatched-tags with friends and templates
gcc/cp/ChangeLog:
PR c++/103703
* parser.c (class_decl_loc_t::diag_mismatched_tags): Check for class
type before assuming a type is one.
gcc/testsuite/ChangeLog:
PR c++/103703
* g++.dg/warn/Wmismatched-tags-9.C: New test.
In order to properly implement two-stage name lookup for dependent
operator expressions, we need to remember the result of unqualified
lookup of the operator at template definition time, and reuse that
result rather than performing another unqualified lookup at
instantiation time.
Ideally we could just store the lookup in the expression directly, but
as pointed out in r9-6405 this isn't really possible since we use the
standard tree codes to represent most dependent operator expressions.
We could perhaps create a new tree code to represent dependent operator
expressions, with enough operands to store the lookup along with
everything else, but that'd require a lot of careful work to make sure
we handle this new tree code properly across the frontend.
But currently type-dependent operator (and call) expressions are given
an empty TREE_TYPE, which dependent_type_p treats as dependent, so this
field is effectively unused except to signal that the expression is
type-dependent. It'd be convenient if we could store the lookup there
while preserving the dependent-ness of the expression.
To that end, this patch creates a new kind of type, called
DEPENDENT_OPERATOR_TYPE, which we give to dependent operator expressions
and into which we can store the result of operator lookup at template
definition time (DEPENDENT_OPERATOR_TYPE_SAVED_LOOKUPS). Since this
type is always dependent (by definition), and since the frontend doesn't
seem to care much about the exact type of a type-dependent expression,
using this type in place of a NULL_TREE type seems to "just work"; only
dependent_type_p and WILDCARD_TYPE_P need to be adjusted to return true
for this new type.
The rest of the patch mostly consists of adding the necessary plumbing
to pass DEPENDENT_OPERATOR_TYPE_SAVED_LOOKUPS to add_operator_candidates,
adjusting all callers of build_x_* appropriately, and removing the now
unnecessary push_operator_bindings mechanism.
In passing, this patch simplifies finish_constraint_binary_op to avoid
using build_x_binary_op for building a binary constraint-expr; we don't
need to consider operator overloads here, as the &&/|| inside a
constraint effectively always has the built-in meaning (since atomic
constraints must have bool type).
This patch also makes FOLD_EXPR_OP yield a tree_code instead of a raw
INTEGER_CST.
Finally, this patch adds the XFAILed test operator-8.C which is about
broken two-stage name lookup for rewritten non-dependent operator
expressions, an existing bug that's otherwise only documented in
build_new_op.
PR c++/51577
PR c++/83035
PR c++/100465
gcc/cp/ChangeLog:
* call.c (add_operator_candidates): Add lookups parameter.
Use it to avoid performing a second unqualified lookup when
instantiating a dependent operator expression.
(build_new_op): Add lookups parameter and pass it appropriately.
* constraint.cc (finish_constraint_binary_op): Use
build_min_nt_loc instead of build_x_binary_op.
* coroutines.cc (build_co_await): Adjust call to build_new_op.
* cp-objcp-common.c (cp_common_init_ts): Mark
DEPENDENT_OPERATOR_TYPE appropriately.
* cp-tree.def (DEPENDENT_OPERATOR_TYPE): Define.
* cp-tree.h (WILDCARD_TYPE_P): Accept DEPENDENT_OPERATOR_TYPE.
(FOLD_EXPR_OP_RAW): New, renamed from ...
(FOLD_EXPR_OP): ... this. Change this to return the tree_code directly.
(DEPENDENT_OPERATOR_TYPE_SAVED_LOOKUPS): Define.
(templated_operator_saved_lookups): Define.
(build_new_op): Add lookups parameter.
(build_dependent_operator_type): Declare.
(build_x_indirect_ref): Add lookups parameter.
(build_x_binary_op): Likewise.
(build_x_unary_op): Likewise.
(build_x_compound_expr): Likewise.
(build_x_modify_expr): Likewise.
* cxx-pretty-print.c (get_fold_operator): Adjust after
FOLD_EXPR_OP change.
* decl.c (start_preparsed_function): Don't call
push_operator_bindings.
* decl2.c (grok_array_decl): Adjust calls to build_new_op.
* method.c (do_one_comp): Likewise.
(build_comparison_op): Likewise.
* module.cc (trees_out::type_node): Handle DEPENDENT_OPERATOR_TYPE.
(trees_in::tree_node): Likewise.
* name-lookup.c (lookup_name): Revert r11-2876 change.
(op_unqualified_lookup): Remove.
(maybe_save_operator_binding): Remove.
(discard_operator_bindings): Remove.
(push_operator_bindings): Remove.
* name-lookup.h (maybe_save_operator_binding): Remove.
(push_operator_bindings): Remove.
(discard_operator_bindings): Remove.
* parser.c (cp_parser_unary_expression): Adjust calls to build_x_*.
(cp_parser_binary_expression): Likewise.
(cp_parser_assignment_expression): Likewise.
(cp_parser_expression): Likewise.
(do_range_for_auto_deduction): Likewise.
(cp_convert_range_for): Likewise.
(cp_parser_perform_range_for_lookup): Likewise.
(cp_parser_template_argument): Likewise.
(cp_parser_omp_for_cond): Likewise.
(cp_parser_omp_for_incr): Likewise.
(cp_parser_omp_for_loop_init): Likewise.
(cp_convert_omp_range_for): Likewise.
(cp_finish_omp_range_for): Likewise.
* pt.c (fold_expression): Adjust after FOLD_EXPR_OP change. Pass
templated_operator_saved_lookups to build_x_*.
(tsubst_omp_for_iterator): Adjust call to build_x_modify_expr.
(tsubst_expr) <case COMPOUND_EXPR>: Pass
templated_operator_saved_lookups to build_x_*.
(tsubst_copy_and_build) <case INDIRECT_REF>: Likewise.
<case tcc_unary>: Likewise.
<case tcc_binary>: Likewise.
<case MODOP_EXPR>: Likewise.
<case COMPOUND_EXPR>: Likewise.
(dependent_type_p_r): Return true for DEPENDENT_OPERATOR_TYPE.
* ptree.c (cxx_print_type): Handle DEPENDENT_OPERATOR_TYPE.
* semantics.c (finish_increment_expr): Adjust call to
build_x_unary_op.
(finish_unary_op_expr): Likewise.
(handle_omp_for_class_iterator): Adjust calls to build_x_*.
(finish_omp_cancel): Likewise.
(finish_unary_fold_expr): Use build_dependent_operator_type.
(finish_binary_fold_expr): Likewise.
* tree.c (cp_free_lang_data): Don't call discard_operator_bindings.
* typeck.c (rationalize_conditional_expr): Adjust call to
build_x_binary_op.
(op_unqualified_lookup): Define.
(build_dependent_operator_type): Define.
(build_x_indirect_ref): Add lookups parameter and use
build_dependent_operator_type.
(build_x_binary_op): Likewise.
(build_x_array_ref): Likewise.
(build_x_unary_op): Likewise.
(build_x_compound_expr_from_list): Adjust call to
build_x_compound_expr.
(build_x_compound_expr_from_vec): Likewise.
(build_x_compound_expr): Add lookups parameter and use
build_dependent_operator_type.
(cp_build_modify_expr): Adjust call to build_new_op.
(build_x_modify_expr): Add lookups parameter and use
build_dependent_operator_type.
* typeck2.c (build_x_arrow): Adjust call to build_new_op.
libcc1/ChangeLog:
* libcp1plugin.cc (plugin_build_unary_expr): Adjust call to
build_x_unary_op.
(plugin_build_binary_expr): Adjust call to build_x_binary_op.
gcc/testsuite/ChangeLog:
* g++.dg/lookup/operator-3.C: Split out operator overload
declarations into ...
* g++.dg/lookup/operator-3-ops.h: ... here.
* g++.dg/lookup/operator-3a.C: New test.
* g++.dg/lookup/operator-4.C: New test.
* g++.dg/lookup/operator-4a.C: New test.
* g++.dg/lookup/operator-5.C: New test.
* g++.dg/lookup/operator-5a.C: New test.
* g++.dg/lookup/operator-6.C: New test.
* g++.dg/lookup/operator-7.C: New test.
* g++.dg/lookup/operator-8.C: New test.
PR target/103709
gcc/c-family/ChangeLog:
* c-pragma.c (handle_pragma_pop_options): Do not check
global options modification when an error is seen in parsing
of options (pragmas or attributes).
In g:01ad8c54fdca we started supporting target pragma changes
that are primarily caused by optimization option. The same can happen
in the opposite way and we need to check for changes both
in optimization_current_node and target_option_current_node.
PR c++/103696
gcc/ChangeLog:
* attribs.c (decl_attributes): Check if
target_option_current_node is changed.
gcc/testsuite/ChangeLog:
* g++.target/i386/pr103696.C: New test.
While replacing the built-in machinery, we agreed to defer some necessary
refactoring of the overload processing. This patch cleans it up considerably.
I've put in one FIXME for an additional level of cleanup that should be done
independently. The various helper functions (resolve_VEC_*) can be simplified
if we move the argument processing in altivec_resolve_overloaded_builtin
earlier. But this requires making nontrivial changes to those functions that
will need careful review. Let's do that in a later patch.
2021-12-16 Bill Schmidt <wschmidt@linux.ibm.com>
gcc/
* config/rs6000/rs6000-c.c (resolution): New enum.
(resolve_vec_mul): New function.
(resolve_vec_cmpne): Likewise.
(resolve_vec_adde_sube): Likewise.
(resolve_vec_addec_subec): Likewise.
(resolve_vec_splats): Likewise.
(resolve_vec_extract): Likewise.
(resolve_vec_insert): Likewise.
(resolve_vec_step): Likewise.
(find_instance): Likewise.
(altivec_resolve_overloaded_builtin): Many cleanups. Call factored-out
functions. Move variable declarations closer to uses. Add commentary.
Remove unnecessary levels of braces. Avoid use of gotos. Change
misleading variable names. Use switches over if-else-if chains.
This patch is sorting issue with LS64 intrinsics tests failing with
AArch64_be targets.
gcc/ChangeLog:
PR target/103729
* config/aarch64/aarch64-simd.md (aarch64_movv8di): Allow big endian
targets to move V8DI.
My r11-2202 was trying to enforce [dcl.type.auto.deduct]/4, which says
"If the placeholder-type-specifier is of the form type-constraint[opt]
decltype(auto), T shall be the placeholder alone." But this made us
reject 'constexpr decltype(auto)', which, after clarification from CWG,
should be valid. [dcl.type.auto.deduct]/4 is supposed to be a syntactic
constraint, not semantic, so it's OK that the constexpr marks the object
as const.
As a consequence, checking TYPE_QUALS in do_auto_deduction is too late,
and we have a FIXME there anyway. So in this patch I'm attempting to
detect 'const decltype(auto)' earlier. If I'm going to use TYPE_QUALS,
it needs to happen before we mark the object as const due to constexpr,
that is, before grokdeclarator's
/* A `constexpr' specifier used in an object declaration declares
the object as `const'. */
if (constexpr_p && innermost_code != cdk_function)
...
Constrained decltype(auto) was a little problem, hence the TYPENAME
check. But in a typename context you can't use decltype(auto) anyway,
I think.
PR c++/102229
gcc/cp/ChangeLog:
* decl.c (check_decltype_auto): New.
(grokdeclarator): Call it.
* pt.c (do_auto_deduction): Don't check decltype(auto) here.
gcc/testsuite/ChangeLog:
* g++.dg/cpp1y/decltype-auto5.C: New test.
For example, for the two (FAIL, XFAIL)
'gcc/testsuite/lib/gcc-dg.exp:gcc-dg-test-1' cases:
-FAIL: g++.dg/modules/xtreme-header-3_a.H -std=c++17 (internal compiler error)
+FAIL: g++.dg/modules/xtreme-header-3_a.H -std=c++17 (internal compiler error: tree check: expected var_decl or function_decl or field_decl or type_decl or concept_decl or template_decl, have namespace_decl in get_merge_kind, at cp/module.cc:10072)
-FAIL: gfortran.dg/gomp/clauses-1.f90 -O (internal compiler error)
+FAIL: gfortran.dg/gomp/clauses-1.f90 -O (internal compiler error: Segmentation fault)
-XFAIL: c-c++-common/goacc/kernels-decompose-ice-1.c (internal compiler error)
+XFAIL: c-c++-common/goacc/kernels-decompose-ice-1.c (internal compiler error: in lower_omp_target, at omp-low.c:13147)
-XFAIL: g++.dg/cpp1z/constexpr-lambda26.C -std=c++17 (internal compiler error)
+XFAIL: g++.dg/cpp1z/constexpr-lambda26.C -std=c++17 (internal compiler error: in cxx_eval_constant_expression, at cp/constexpr.c:6954)
That allows for more easily spotting when during development you're trading one
ICE for another.
gcc/testsuite/
* lib/fortran-torture.exp (fortran-torture-compile)
(fortran-torture-execute): Be more informative for ICEs.
* lib/gcc-defs.exp (${tool}_check_compile): Likewise.
* lib/gcc-dg.exp (gcc-dg-test-1): Likewise.
* lib/go-torture.exp (go-torture-compile, go-torture-execute):
Likewise.
Sync with binutils for building binutils with LTO:
1dbde357be3 Add missing changes to Makefile.tpl
af019bfde9b Support the PGO build for binutils+gdb
Add the --enable-pgo-build[=lto] configure option. When binutils+gdb
is not built together with GCC, --enable-pgo-build enables the PGO build:
1. First build with -fprofile-generate.
2. Use "make maybe-check-*" to generate profiling data and pass -i to make
to ignore errors when generating profiling data.
3. Use "make clean" to remove the previous build.
4. Rebuild with -fprofile-use.
With --enable-pgo-build=lto, -flto=jobserver -ffat-lto-objects are used
together with -fprofile-generate and -fprofile-use. Add '+' to the command
line for recursive make to support -flto=jobserver -ffat-lto-objects.
NB: --enable-pgo-build=lto enables the PGO build with LTO while
--enable-lto enables LTO support in toolchain.
BZ binutils/26766
* Makefile.tpl (BUILD_CFLAGS): New.
(CFLAGS): Append $(BUILD_CFLAGS).
(CXXFLAGS): Likewise.
(PGO_BUILD_GEN_FLAGS_TO_PASS): New.
(PGO_BUILD_TRAINING_CFLAGS): Likewise.
(PGO_BUILD_TRAINING_CXXFLAGS): Likewise.
(PGO_BUILD_TRAINING_FLAGS_TO_PASS): Likewise.
(PGO_BUILD_TRAINING_MFLAGS): Likewise.
(PGO_BUILD_USE_FLAGS_TO_PASS): Likewise.
(PGO-TRAINING-TARGETS): Likewise.
(PGO_BUILD_TRAINING): Likewise.
(all): Add '+' to the command line for recursive make. Support
the PGO build.
* configure.ac: Add --enable-pgo-build[=lto].
AC_SUBST PGO_BUILD_GEN_CFLAGS, PGO_BUILD_USE_CFLAGS and
PGO_BUILD_LTO_CFLAGS. Enable the PGO build in Makefile.
* Makefile.in: Regenerated.
* configure: Likewise.
Sync with binutils for building binutils with LTO:
50ad1254d50 GCC: Pass --plugin to AR and RANLIB
Detect GCC LTO plugin. Pass --plugin to AR and RANLIB to support LTO
build.
ChangeLog:
* Makefile.tpl (AR): Add @AR_PLUGIN_OPTION@
(RANLIB): Add @RANLIB_PLUGIN_OPTION@.
* configure.ac: Include config/gcc-plugin.m4.
AC_SUBST AR_PLUGIN_OPTION and RANLIB_PLUGIN_OPTION.
* libtool.m4 (_LT_CMD_OLD_ARCHIVE): Pass --plugin to AR and
RANLIB if possible.
* Makefile.in: Regenerated.
* configure: Likewise.
config/
* gcc-plugin.m4 (GCC_PLUGIN_OPTION): New.
libiberty/
* Makefile.in (AR): Add @AR_PLUGIN_OPTION@
(RANLIB): Add @RANLIB_PLUGIN_OPTION@.
(configure_deps): Depend on ../config/gcc-plugin.m4.
* configure.ac: AC_SUBST AR_PLUGIN_OPTION and
RANLIB_PLUGIN_OPTION.
* aclocal.m4: Regenerated.
* configure: Likewise.
zlib/
* configure: Regenerated.
Prefer to overload __to_address to partially specialize std::pointer_traits because
std::pointer_traits would be mostly useless. Moreover partial specialization of
pointer_traits<__normal_iterator<P, C>> fails to rebind C, so you get incorrect types
like __normal_iterator<long*, vector<int>>. In the case of __gnu_debug::_Safe_iterator
the to_pointer method is impossible to implement correctly because we are missing
the parent container to associate the iterator to.
libstdc++-v3/ChangeLog:
* include/bits/stl_iterator.h
(std::pointer_traits<__gnu_cxx::__normal_iterator<>>): Remove.
(std::__to_address(const __gnu_cxx::__normal_iterator<>&)): New for C++11 to C++17.
* include/debug/safe_iterator.h
(std::__to_address(const __gnu_debug::_Safe_iterator<__gnu_cxx::__normal_iterator<>,
_Sequence>&)): New for C++11 to C++17.
* testsuite/24_iterators/normal_iterator/to_address.cc: Add check on std::vector::iterator
to validate both __gnu_cxx::__normal_iterator<> __to_address overload in normal mode and
__gnu_debug::_Safe_iterator in _GLIBCXX_DEBUG mode.
We now use a C++ compiler so that we need to process
CXXFLAGS as well as CFLAGS in the gcc-plugin config
fragment.
Signed-off-by: Iain Sandoe <iain@sandoe.co.uk>
config/ChangeLog:
* gcc-plugin.m4: Save and process CXXFLAGS.
gcc/ChangeLog:
* configure: Regenerate.
libcc1/ChangeLog:
* configure: Regenerate.
Add new target macros TARGET_SM75 and TARGET_SM80. Add support for
__builtin_tanhf, HFmode exp2/tanh and also for HFmode min/max, controlled by
TARGET_SM75 and TARGET_SM80 respectively.
The following has been tested on nvptx-none, hosted on x86_64-pc-linux-gnu
with a "make" and "make -k check" with no new failures.
gcc/ChangeLog:
* config/nvptx/nvptx-opts.h (ptx_isa): PTX_ISA_SM75 and PTX_ISA_SM80
ISA levels.
* config/nvptx/nvptx.opt: Add sm_75 and sm_80 to -misa.
* config/nvptx/nvptx.h (TARGET_SM75, TARGET_SM80):
New helper macros to conditionalize functionality on target ISA.
* config/nvptx/nvptx-c.c (nvptx_cpu_cpp_builtins): Add __PTX_SM__
support for the new ISA levels.
* config/nvptx/nvptx.c (nvptx_file_start): Add support for TARGET_SM75
and TARGET_SM80.
* config/nvptx/nvptx.md (define_c_enum "unspec"): New UNSPEC_TANH.
(define_mode_iterator HSFM): New iterator for HFmode and SFmode.
(exp2hf2): New define_insn controlled by TARGET_SM75.
(tanh<mode>2): New define_insn controlled by TARGET_SM75.
(sminhf3, smaxhf3): New define_isnns controlled by TARGET_SM80.
gcc/testsuite/ChangeLog:
* gcc.target/nvptx/float16-2.c: New test case.
* gcc.target/nvptx/tanh-1.c: New test case.
Add support for ptx isa version 7.0, required for the addition of -misa=sm_75
and -misa=sm_80.
Tested by setting the default ptx isa version to 7.0, and doing a build and
libgomp test run.
gcc/ChangeLog:
* config/nvptx/nvptx-opts.h (enum ptx_version): Add PTX_VERSION_7_0.
* config/nvptx/nvptx.c (nvptx_file_start): Handle TARGET_PTX_7_0.
* config/nvptx/nvptx.h (TARGET_PTX_7_0): New macro.
* config/nvptx/nvptx.opt (ptx_version): Add 7.0.
In this PR we were wrongly classifying a pair of 8-byte vectors
as a 16-byte “short vector” (in the AAPCS64 sense). As the
comment in the patch says, this stems from an old condition
in aarch64_short_vector_p that is too loose, but that would
be difficult to tighten now.
We can still do the right thing for the newly-added modes though,
since there are no backwards compatibility concerns there.
Co-authored-by: Tamar Christina <tamar.christina@arm.com>
gcc/
PR target/103094
* config/aarch64/aarch64.c (aarch64_short_vector_p): Return false
for structure modes, rather than ignoring the type in that case.
gcc/testsuite/
PR target/103094
* gcc.target/aarch64/pr103094.c: New test.
This and the report in PR103632 are caused by a bug in REE where it generates
incorrect code.
It's trying to eliminate the following zero extension
(insn 54 90 102 2 (set (reg:V4SI 33 v1)
(zero_extend:V4SI (reg/v:V4HI 40 v8)))
(nil))
by folding it in the definition of `v8`:
(insn 2 5 104 2 (set (reg/v:V4HI 40 v8)
(reg:V4HI 32 v0 [156]))
(nil))
which is fine, except that `v8` is also used by the extracts, e.g.:
(insn 11 10 12 2 (set (reg:SI 1 x1)
(zero_extend:SI (vec_select:HI (reg/v:V4HI 40 v8)
(parallel [
(const_int 3)
]))))
(nil))
REE replaces insn 2 by folding insn 54 and placing it at the definition site of
insn 2, so before insn 11.
Trying to eliminate extension:
(insn 54 90 102 2 (set (reg:V4SI 33 v1)
(zero_extend:V4SI (reg/v:V4HI 40 v8)))
(nil))
Tentatively merged extension with definition (copy needed):
(insn 2 5 104 2 (set (reg:V4SI 33 v1)
(zero_extend:V4SI (reg:V4HI 32 v0)))
(nil))
to produce
(insn 2 5 110 2 (set (reg:V4SI 33 v1)
(zero_extend:V4SI (reg:V4HI 32 v0)))
(nil))
(insn 110 2 104 2 (set (reg:V4SI 40 v8)
(reg:V4SI 33 v1))
(nil))
The new insn 2 using v0 directly is correct, but the insn 110 it creates is
wrong, `v8` should still be V4HI.
or it also needs to eliminate the zero extension from the extracts, so instead
of
(insn 11 10 12 2 (set (reg:SI 1 x1)
(zero_extend:SI (vec_select:HI (reg/v:V4HI 40 v8)
(parallel [
(const_int 3)
]))))
(nil))
it should be
(insn 11 10 12 2 (set (reg:SI 1 x1)
(vec_select:SI (reg/v:V4SI 40 v8)
(parallel [
(const_int 3)
])))
(nil))
without doing so the indices have been remapped in the extension and so we
extract the wrong elements
At any other optimization level but -Os ree seems to abort so this doesn't
trigger:
Trying to eliminate extension:
(insn 54 90 101 2 (set (reg:V4SI 32 v0)
(zero_extend:V4SI (reg/v:V4HI 40 v8)))
(nil))
Elimination opportunities = 2 realized = 0
purely due to the ordering of instructions. REE doesn't check uses of `v8`
because it assumes that with a zero extended value, you still have access to the
lower bits by using the the bottom part of the register.
This is true for scalar but not for vector. This would have been fine as well
if REE had eliminated the zero_extend on insn 11 and the rest but it doesn't do
so since REE can only handle cases where the SRC value are REG_P.
It does try to do this in add_removable_extension:
1160 /* For vector mode extensions, ensure that all uses of the
1161 XEXP (src, 0) register are in insn or debug insns, as unlike
1162 integral extensions lowpart subreg of the sign/zero extended
1163 register are not equal to the original register, so we have
1164 to change all uses or none and the current code isn't able
1165 to change them all at once in one transaction. */
However this code doesn't trigger for the example because REE doesn't check the
uses if the defining instruction doesn't feed into another extension..
Which is bogus. For vectors it should always check all usages.
r12-2288-g8695bf78dad1a42636775843ca832a2f4dba4da3 simply exposed this as it now
lowers VEC_SELECT 0 into the RTL canonical form subreg 0 which causes REE to run
more often.
gcc/ChangeLog:
PR rtl-optimization/103350
* ree.c (add_removable_extension): Don't stop at first definition but
inspect all.
gcc/testsuite/ChangeLog:
PR rtl-optimization/103350
* gcc.target/aarch64/pr103350-1.c: New test.
* gcc.target/aarch64/pr103350-2.c: New test.
This test fails:
+FAIL: g++.dg/cpp23/auto-fncast11.C -std=c++2b (test for errors, line 19)
+FAIL: g++.dg/cpp23/auto-fncast11.C -std=c++2b (test for excess errors)
because the regex in dg-error was missing an indefinite article.
2021-12-15 Jakub Jelinek <jakub@redhat.com>
PR c++/103408
* g++.dg/cpp23/auto-fncast11.C: Fix expected diagnostic wording.
On Tue, Dec 14, 2021 at 10:32:21AM -0700, Jeff Law wrote:
> I think the attached testcase should trigger on c6x with -mbig-endian -O2 -g
Thanks. Finally I see what's going on. c6x doesn't really need the CFA
with span > 1 (and I bet neither does armbe), the only reason why
dwf_cfa_reg is called is that the code in 13 cases just tries to compare
the CFA against dwf_cfa_reg (some_reg). And that dwf_cfa_reg on some reg
that usually isn't a CFA reg results in targetm.dwarf_register_span hook
call, which on targets like c6x or armeb and others for some registers
creates a PARALLEL with various REGs in it, then the loop with the assertion
and finally operator== which just notes that the reg is different and fails.
This seems compile time memory and time inefficient.
The following so far untested patch instead adds an extra operator== and !=
for comparison of cfa_reg with rtx, which has the most common case where it
is a different register number done early without actually invoking
dwf_cfa_reg. This means the assertion in dwf_cfa_reg can stay as is (at
least until some big endian target needs to have hard frame pointer or stack
pointer with span > 1 as well).
I've removed a different assertion there because it is redundant - dwf_regno
already has exactly that assertion in it too.
And I've included those 2 tweaks to avoid creating a REG in GC memory when
we can use {stack,hard_frame}_pointer_rtx which is already initialized to
the same REG we need by init_emit_regs.
On Tue, Dec 14, 2021 at 03:05:37PM -0700, Jeff Law wrote:
> So if someone is unfamiliar with the underlying issues here and needs to
> twiddle dwarf2cfi, how are they supposed to know if they should compare
> directly or use dwf_cfa_reg?
Comparison without dwf_cfa_reg should be used whenever possible, because
for registers which are never CFA related that won't call
targetm.dwarf_register_span uselessly.
The only comparisons with dwf_cfa_reg I've kept are the:
regno = dwf_cfa_reg (XEXP (XEXP (dest, 0), 0));
if (cur_cfa->reg == regno)
offset -= cur_cfa->offset;
else if (cur_trace->cfa_store.reg == regno)
offset -= cur_trace->cfa_store.offset;
else
{
gcc_assert (cur_trace->cfa_temp.reg == regno);
offset -= cur_trace->cfa_temp.offset;
}
and
struct cfa_reg regno = dwf_cfa_reg (XEXP (dest, 0));
if (cur_cfa->reg == regno)
offset = -cur_cfa->offset;
else if (cur_trace->cfa_store.reg == regno)
offset = -cur_trace->cfa_store.offset;
else
{
gcc_assert (cur_trace->cfa_temp.reg == regno);
offset = -cur_trace->cfa_temp.offset;
}
and there are 2 reasons for it:
1) there is an assertion, which guarantees it must compare equal to one of
those 3 cfa related struct cfa_reg structs, so it must be some CFA related
register (so, right now, targetm.dwarf_register_span shouldn't return
non-NULL in those on anything but gcn)
2) it is compared 3 times in a row, so for the GCN case doing
if (cur_cfa->reg == XEXP (XEXP (dest, 0), 0))
offset -= cur_cfa->offset;
else if (cur_trace->cfa_store.reg == XEXP (XEXP (dest, 0), 0))
offset -= cur_trace->cfa_store.offset;
else
{
gcc_assert (cur_trace->cfa_temp.reg == XEXP (XEXP (dest, 0), 0));
offset -= cur_trace->cfa_temp.offset;
}
could actually create more GC allocated garbage than the way it is written
now. But doing it that way would work fine.
I think for most of the comparisons even comparing with dwf_cfa_reg would
work but be less compile time/memory efficient (e.g. those assertions that
it is equal to some CFA related cfa_reg or in any spots where only the CFA
related regs may appear in the frame related patterns).
I'm aware just of a single spot where comparison with dwf_cfa_reg doesn't
work (when the assert is in dwf_cfa_reg), that is the spot that was ICEing
on your testcase, where we save arbitrary call saved register:
if (REG_P (src)
&& REGNO (src) != STACK_POINTER_REGNUM
&& REGNO (src) != HARD_FRAME_POINTER_REGNUM
&& cur_cfa->reg == src)
2021-12-15 Jakub Jelinek <jakub@redhat.com>
PR debug/103619
* dwarf2cfi.c (dwf_cfa_reg): Remove gcc_assert.
(operator==, operator!=): New overloaded operators.
(dwarf2out_frame_debug_adjust_cfa, dwarf2out_frame_debug_cfa_offset,
dwarf2out_frame_debug_expr): Compare vars with cfa_reg type directly
with REG rtxes rather than with dwf_cfa_reg results on those REGs.
(create_cie_data): Use stack_pointer_rtx instead of
gen_rtx_REG (Pmode, STACK_POINTER_REGNUM).
(execute_dwarf2_frame): Use hard_frame_pointer_rtx instead of
gen_rtx_REG (Pmode, HARD_FRAME_POINTER_REGNUM).
PR target/103661
gcc/ChangeLog:
* config/i386/i386-builtins.c (fold_builtin_cpu): Compare to 0
as API expects that non-zero values are returned (do that
it mask == 31).
For "avx512vbmi2" argument, we return now 1 << 31, which is a
negative integer value.
On OMP_CLAUSEs we reuse TREE_TYPE as CP_OMP_CLAUSE_INFO in the C++ FE.
This confuses the hashing code that operand_equal_p does when checking.
There is really no reason to compare OMP_CLAUSEs against expressions
like captured this, they will never compare equal.
2021-12-15 Jakub Jelinek <jakub@redhat.com>
PR c++/103704
* semantics.c (finish_omp_target_clauses_r): For OMP_CLAUSEs
just walk subtrees.
* g++.dg/gomp/pr103704.C: New test.
This patch uses the same not completely correct case insensitive comparisons
as used elsewhere in the same header. Proper comparisons that would handle
even multi-byte characters would be harder, but I don't see them implemented
in __ctype's methods.
2021-12-15 Jakub Jelinek <jakub@redhat.com>
PR libstdc++/71557
* include/bits/locale_facets_nonio.tcc (_M_extract_via_format):
Compare characters other than format specifiers and whitespace
case insensitively.
(_M_extract_name): Compare characters case insensitively.
* testsuite/22_locale/time_get/get/char/71557.cc: New test.
* testsuite/22_locale/time_get/get/wchar_t/71557.cc: New test.
This patch implements XXSPLTIDP support for SF, and DF scalar constants.
The previous patch added support for vector constants. This patch adds
the support for SFmode and DFmode scalar constants.
I added 2 new tests to test loading up SF and DF scalar constants.
2021-12-15 Michael Meissner <meissner@the-meissners.org>
gcc/
* config/rs6000/rs6000.md (UNSPEC_XXSPLTIDP_CONST): New unspec.
(UNSPEC_XXSPLTIW_CONST): New unspec.
(movsf_hardfloat): Add support for generating XXSPLTIDP.
(mov<mode>_hardfloat32): Likewise.
(mov<mode>_hardfloat64): Likewise.
(xxspltidp_<mode>_internal): New insns.
(xxspltiw_<mode>_internal): New insns.
(splitters for SF/DFmode): Add new splitters for XXSPLTIDP.
gcc/testsuite/
* gcc.target/powerpc/vec-splat-constant-df.c: New test.
* gcc.target/powerpc/vec-splat-constant-sf.c: New test.
This patch implements XXSPLTIDP support for all vector constants. The
XXSPLTIDP instruction is given a 32-bit immediate that is converted to a vector
of two DFmode constants. The immediate is in SFmode format, so only constants
that fit as SFmode values can be loaded with XXSPLTIDP.
The constraint (eP) added in the previous patch for XXSPLTIW is also used
for XXSPLTIDP.
DImode scalar constants are not handled. This is due to the majority of DImode
constants will be in the GPR registers. With vector registers, you have the
problem that XXSPLTIDP splats the double word into both elements of the
vector. However, if TImode is loaded with an integer constant, it wants a full
128-bit constant.
SFmode and DFmode scalar constants are not handled in this patch. The
support for for those constants will be in the next patch.
I have added a temporary switch (-msplat-float-constant) to control whether or
not the XXSPLTIDP instruction is generated.
I added 2 new tests to test loading up V2DI and V2DF vector constants.
2021-12-14 Michael Meissner <meissner@the-meissners.org>
gcc/
* config/rs6000/predicates.md (easy_fp_constant): Add support for
generating XXSPLTIDP.
(vsx_prefixed_constant): Likewise.
(easy_vector_constant): Likewise.
* config/rs6000/rs6000-protos.h (constant_generates_xxspltidp):
New declaration.
* config/rs6000/rs6000.c (output_vec_const_move): Add support for
generating XXSPLTIDP.
(prefixed_xxsplti_p): Likewise.
(constant_generates_xxspltidp): New function.
* config/rs6000/rs6000.opt (-msplat-float-constant): New debug option.
gcc/testsuite/
* gcc.target/powerpc/pr86731-fwrapv-longlong.c: Update insn
regex for power10.
* gcc.target/powerpc/vec-splat-constant-v2df.c: New test.
* gcc.target/powerpc/vec-splat-constant-v2di.c: New test.
This patch adds support to automatically generate the ISA 3.1 XXSPLTIW
instruction for V8HImode, V4SImode, and V4SFmode vectors. It does this by
adding support for vector constants that can be used, and adding a
VEC_DUPLICATE pattern to generate the actual XXSPLTIW instruction.
Add the eP constraint to recognize constants that can be loaded into
vector registers with a single prefixed instruction such as xxspltiw and
xxspltidp.
I added 4 new tests to test loading up V16QI, V8HI, V4SI, and V4SF vector
constants.
2021-12-14 Michael Meissner <meissner@linux.ibm.com>
gcc/
* config/rs6000/constraints.md (eP): Update comment.
* config/rs6000/predicates.md (easy_fp_constant): Add support for
generating XXSPLTIW.
(vsx_prefixed_constant): New predicate.
(easy_vector_constant): Add support for
generating XXSPLTIW.
* config/rs6000/rs6000-protos.h (prefixed_xxsplti_p): New
declaration.
(constant_generates_xxspltiw): Likewise.
* config/rs6000/rs6000.c (xxspltib_constant_p): Generate XXSPLTIW
if possible instead of XXSPLTIB and sign extending the constant.
(output_vec_const_move): Add support for XXSPLTIW.
(prefixed_xxsplti_p): New function.
(constant_generates_xxspltiw): New function.
* config/rs6000/rs6000.md (prefixed attribute): Add support to
mark XXSPLTI* instructions as being prefixed.
* config/rs6000/rs6000.opt (-msplat-word-constant): New debug
switch.
* config/rs6000/vsx.md (vsx_mov<mode>_64bit): Add support for
generating XXSPLTIW or XXSPLTIDP.
(vsx_mov<mode>_32bit): Likewise.
* doc/md.texi (PowerPC and IBM RS6000 constraints): Document the
eP constraint.
gcc/testsuite/
* gcc.target/powerpc/vec-splat-constant-v16qi.c: New test.
* gcc.target/powerpc/vec-splat-constant-v4sf.c: New test.
* gcc.target/powerpc/vec-splat-constant-v4si.c: New test.
* gcc.target/powerpc/vec-splat-constant-v8hi.c: New test.
* gcc.target/powerpc/vec-splati-runnable.c: Update insn count.
This patch adds support to generate the LXVKQ instruction to load specific
IEEE-128 floating point constants.
Compared to the last time I submitted this patch, I modified it so that it
uses the bit pattern of the vector to see if it can generate the LXVKQ
instruction. This means on a little endian Power<xxx> system, the
following code will generate a LXVKQ 34,16 instruction:
vector long long foo (void)
{
return (vector long long) { 0x0000000000000000, 0x8000000000000000 };
}
because that vector pattern is the same bit pattern as -0.0F128.
2021-12-14 Michael Meissner <meissner@the-meissners.org>
gcc/
* config/rs6000/constraints.md (eQ): New constraint.
* config/rs6000/predicates.md (easy_fp_constant): Add support for
generating the LXVKQ instruction.
(easy_vector_constant_ieee128): New predicate.
(easy_vector_constant): Add support for generating the LXVKQ
instruction.
* config/rs6000/rs6000-protos.h (constant_generates_lxvkq): New
declaration.
* config/rs6000/rs6000.c (output_vec_const_move): Add support for
generating LXVKQ.
(constant_generates_lxvkq): New function.
* config/rs6000/rs6000.opt (-mieee128-constant): New debug
option.
* config/rs6000/vsx.md (vsx_mov<mode>_64bit): Add support for
generating LXVKQ.
(vsx_mov<mode>_32bit): Likewise.
* doc/md.texi (PowerPC and IBM RS6000 constraints): Document the
eQ constraint.
gcc/testsuite/
* gcc.target/powerpc/float128-constant.c: New test.
This patch provides the data structure and function to convert a
CONST_INT, CONST_DOUBLE, CONST_VECTOR, or VEC_DUPLICATE of a constant) to
an array of bytes, half-words, words, and double words that can be loaded
into a 128-bit vector register.
The next patches will use this data structure to generate code that
generates load of the vector/floating point registers using the XXSPLTIDP,
XXSPLTIW, and LXVKQ instructions that were added in power10.
2021-12-15 Michael Meissner <meissner@the-meissners.org>
gcc/
* config/rs6000/rs6000-protos.h (VECTOR_128BIT_BITS): New macro.
(VECTOR_128BIT_BYTES): Likewise.
(VECTOR_128BIT_HALF_WORDS): Likewise.
(VECTOR_128BIT_WORDS): Likewise.
(VECTOR_128BIT_DOUBLE_WORDS): Likewise.
(vec_const_128bit_type): New structure type.
(vec_const_128bit_to_bytes): New declaration.
* config/rs6000/rs6000.c (constant_int_to_128bit_vector): New
helper function.
(constant_fp_to_128bit_vector): New helper function.
(vec_const_128bit_to_bytes): New function.
The conversion of a MEM address to ptr_mode in
try_store_by_multiple_pieces was misguided: copy_addr_to_reg expects
Pmode for addresses.
for gcc/ChangeLog
PR target/100518
* builtins.c (try_store_by_multiple_pieces): Drop address
conversion to ptr_mode.
for gcc/testsuite/ChangeLog
PR target/100518
* gcc.target/aarch64/pr100518.c: New.
The testcase confuses the code that detects min and max len for the
memset, so max_len ends up less than min_len. That shouldn't be
possible, but the testcase requires us to handle this case.
The store-by-mult-pieces algorithm actually relies on min and max
lengths, so if we find them to be inconsistent, the best we can do is
punting.
for gcc/ChangeLog
PR middle-end/100843
* builtins.c (try_store_by_multiple_pieces): Fail if min_len
is greater than max_len.
for gcc/testsuite/ChangeLog
PR middle-end/100843
* gcc.dg/pr100843.c: New.
This checks whether the locale data for en_HK includes %p and adjusts
the string being tested accordingly. To account for Jakub's fix to make
%I parse "12" as 0 instead of 12, we need to change the expected value
for the case where the locale format doesn't include %p. Also change the
time from 12:00:00 to 12:02:01 so we can tell if the minutes and seconds
get mixed up.
libstdc++-v3/ChangeLog:
PR libstdc++/103687
* testsuite/22_locale/time_get/get_date/wchar_t/4.cc: Restore
original locale before returning.
* testsuite/22_locale/time_get/get_time/char/2.cc: Check for %p
in locale's T_FMT and adjust accordingly.
* testsuite/22_locale/time_get/get_time/wchar_t/2.cc: Likewise.
The stddef.h header checks/sets various hardcoded toolchain/os specific
macro guards to prevent redefining types such as ptrdiff_t, wchar_t, or
size_t. However, without this patch, the file does not check/set the
typedef macro guards for musl libc. This causes types such as size_t to
be defined twice for files which include both musl's stdlib.h as well as
GCC's ginclude/stddef.h. This is, for example, the case for
libgo/sysinfo.c. If libgo/sysinfo.c has multiple typedefs for size_t
this confuses -fdump-go-spec and causes size_t not to be included in the
generated type definitions thereby causing a gcc-go compilation failure
on Alpine Linux Edge (which uses musl libc) with the following error:
sysinfo.go:7765:13: error: use of undefined type '_size_t'
7765 | type Size_t _size_t
| ^
libcall_posix.go:49:35: error: non-integer len argument in make
49 | b := make([]byte, len)
|
This commit fixes this issue by ensuring that ptrdiff_t, wchar_t, and size_t
are only defined once in the pre-processed libgo/sysinfo.c file by enhancing
gcc/ginclude/stddef.h with musl-specific typedef macro guards.
gcc/ChangeLog:
* ginclude/stddef.h (__DEFINED_ptrdiff_t): Add support for musl
libc typedef macro guard.
(__DEFINED_size_t): Ditto.
(__DEFINED_wchar_t): Ditto.
std::regex currently allows invalid bracket ranges such as [\w-a] which
are only allowed by ECMAScript when in web browser compatibility mode.
It should be an error, because the start of the range is a character
class, not a single character. The current implementation of
_Compiler::_M_expression_term does not provide a way to reject this,
because we only remember a previous character, not whether we just
processed a character class (or collating symbol etc.)
This patch replaces the pair<bool, CharT> used to emulate
optional<CharT> with a custom class closer to pair<tribool,CharT>. That
allows us to track three states, so that we can tell when we've just
seen a character class.
With this additional state the code in _M_expression_term for processing
the _S_token_bracket_dash can be improved to correctly reject the [\w-a]
case, without regressing for valid cases such as [\w-] and [----].
libstdc++-v3/ChangeLog:
PR libstdc++/102447
* include/bits/regex_compiler.h (_Compiler::_BracketState): New
class.
(_Compiler::_BrackeyMatcher): New alias template.
(_Compiler::_M_expression_term): Change pair<bool, CharT>
parameter to _BracketState. Process first character for
ECMAScript syntax as well as POSIX.
* include/bits/regex_compiler.tcc
(_Compiler::_M_insert_bracket_matcher): Pass _BracketState.
(_Compiler::_M_expression_term): Use _BracketState to store
state between calls. Improve handling of dashes in ranges.
* testsuite/28_regex/algorithms/regex_match/cstring_bracket_01.cc:
Add more tests for ranges containing dashes. Check invalid
ranges with character class at the beginning.
Sandra Loosemore
Marek Polacek
Martin Sebor
Patrick Palka
Uros Bizjak
Matthias Seidel
Martin Liska
Francois-Xavier Coudert
Bill Schmidt
Przemyslaw Wirkus
Tobias Burnus
H.J. Lu
Xionghu Luo
GCC Administrator
Thomas Schwinge
François Dumont
Iain Buclaw
Iain Sandoe
Roger Sayle
Tom de Vries
Richard Sandiford
Tamar Christina
Jakub Jelinek
Haochen Jiang
Michael Meissner
Alexandre Oliva
liuhongt
Jonathan Wakely
Sören Tempel
JoJo R