As the following testcase shows, unwind.h on ARM can't be (starting with GCC
10) compiled with -std=c* modes, only -std=gnu* modes.
The problem is it uses asm keyword, which isn't a keyword in those modes
(system headers vs. non-system ones don't make a difference here).
glibc and other installed headers use __asm or __asm__ keywords instead that
work fine in both standard and gnu modes.
While there, as it is an installed header, I think it is also wrong to
completely ignore any identifier namespace rules.
The generic unwind.h defines just _Unwind* namespace identifiers plus
_sleb128_t/_uleb128_t (but e.g. unlike libstdc++/glibc headers doesn't
uglify operand names), the ARM unwind.h is much worse here. I've just
changed the gnu_Unwind_Find_got function at least not be in user identifier
namespace, but perhaps it would be good to go further and rename e.g.
or e.g.
typedef _Unwind_Reason_Code (*personality_routine) (_Unwind_State,
_Unwind_Control_Block *, _Unwind_Context *);
in unwind-arm-common.h.
2020-02-07 Jakub Jelinek <jakub@redhat.com>
PR target/93615
* config/arm/unwind-arm.h (gnu_Unwind_Find_got): Rename to ...
(_Unwind_gnu_Find_got): ... this. Use __asm instead of asm. Remove
trailing :s in asm. Formatting fixes.
(_Unwind_decode_typeinfo_ptr): Adjust caller.
* gcc.dg/pr93615.c: New test.
On nios2-linux-gnu, there has been a long-standing bug in C++ exception
handling that sometimes resulted in link errors like
../nios2-linux-gnu/bin/ld: FDE encoding in /tmp/cccfpQ2l.o(.eh_frame) prevents .eh_frame_hdr table being created
when building some shared libraries or PIE executables. The root of
the problem is that GCC was incorrectly emitting an absolute encoding
in EH tables for PIC. This patch changes it to use either
DW_EH_PE_indirect (for global) or DW_EH_PE_datarel (for local), and
fixes libgcc so it can find the address of the GOT as the base address
for DW_EH_PE_datarel.
Complicating matters somewhat, GAS was missing support for
%gotoff(symbol) relocation syntax. I have just pushed a fix for that,
but I've added a configure check to test for presence of the binutils
support and fall back to the current absolute encoding (which works
most of the time) if it is not available. Once the fix makes it into
an official binutils release it might be appropriate to make this
error out instead.
Since this is a wrong-code bug and affects only nios2 target, I think
this is appropriate for Stage 4. I regression-tested on both
nios2-linux-gnu and nios2-elf, with and without the binutils support
present, before committing this.
2020-01-31 Sandra Loosemore <sandra@codesourcery.com>
gcc/
* configure.ac [nios2-*-*]: Check HAVE_AS_NIOS2_GOTOFF_RELOCATION.
* config.in: Regenerated.
* configure: Regenerated.
* config/nios2/nios2.h (ASM_PREFERRED_EH_DATA_FORMAT): Fix handling
for PIC when HAVE_AS_NIOS2_GOTOFF_RELOCATION.
(ASM_MAYBE_OUTPUT_ENCODED_ADDR_RTX): New.
gcc/testsuite/
* g++.target/nios2/hello-pie.C: New.
* g++.target/nios2/nios2.exp: New.
libgcc/
* config.host [nios2-*-linux*] (tmake_file, tm_file): Adjust.
* config/nios2-elf-lib.h: New.
* unwind-dw2-fde-dip.c (_Unwind_IteratePhdrCallback): Use existing
code for finding GOT base for nios2.
ARC processors can work with a reduced register set (i.e. registers
r4-r9 and r16-r25 are not available). This option can be enabled
passing -mrf16 option to the compiler, or by using -mcpu=em_mini CPU
configuration. Using RF16 config requires all the hand-made assembly
files used in libgcc to have the corresponding RF16 object attribute
set.
This patch qualifies the relevant hand-made assembly files to
RF16 config, and also adds generic c-functions for the one which are
not.
libgcc/
xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>
* config/arc/crti.S: Add RF16 object attribute.
* config/arc/crtn.S: Likewise.
* config/arc/crttls.S: Likewise.
* config/arc/lib1funcs.S: Likewise.
* config/arc/fp-hack.h (ARC_OPTFPE): Define.
* config/arc/lib2funcs.c: New file.
* config/arc/t-arc: Add lib2funcs to LIB2ADD.
libgcc/ChangeLog:
2020-01-23 Dragan Mladjenovic <dmladjenovic@wavecomp.com>
* config/mips/gnustack.h: Check for TARGET_LIBC_GNUSTACK also.
gcc/ChangeLog:
2020-01-23 Dragan Mladjenovic <dmladjenovic@wavecomp.com>
* config.in: Regenerated.
* config/mips/linux.h (NEED_INDICATE_EXEC_STACK): Define to 1
for TARGET_LIBC_GNUSTACK.
* configure: Regenerated.
* configure.ac: Define TARGET_LIBC_GNUSTACK if glibc version is
found to be 2.31 or greater.
PR tree-optimization/92924
* libgcov-profiler.c (__gcov_topn_values_profiler_body): First
try to find an existing value, then find an empty slot
if not found.
PR tree-optimization/92924
* profile.c (compute_value_histograms): Divide
all counter values.
PR tree-optimization/92924
* libgcov-driver.c (prune_topn_counter): New.
(prune_counters): Likewise.
(dump_one_gcov): Prune a run-time counter.
* libgcov-profiler.c (__gcov_topn_values_profiler_body):
For a known value, add GCOV_TOPN_VALUES to value.
Otherwise, decrement all counters by one.
* config/cris/arit.c (DS): Apply attribute fallthrough.
Without this, there are, for each compilation of arit.c, 30ish
occurrences of "this statement may fall through
[-Wimplicit-fallthrough=]", for lines that look like
case 32: DS; case 31: DS; case 30: DS; case 29: DS;
This patch is part of a patch series to add support for Armv8.1-M
Mainline Security Extensions architecture.
Code to detect whether cmse.c can be buit with -mcmse checks the output
of host GCC when invoked with -mcmse. However, an error from the
compiler does not prevent some minimal output so this always holds true.
2020-01-16 Mihail-Calin Ionescu <mihail.ionescu@arm.com>
2020-01-16 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/arm/t-arm: Check return value of gcc rather than lack of
output.
This changes introduces an internal API for VxWorks version checks
within runtime files, a prerequisite to a few fixes coming up for libstdc++
builds on more recent versions of the OS.
2019-12-30 Olivier Hainque <hainque@adacore.com>
gcc/
* config/vxworks/_vxworks-versions.h: New file.
* config.gcc (*-*-vxworks*): Add it to extra_headers.
libgcc/
* config/gthr-vxworks.h: Use _vxworks-versions.h.
* config/gthr-vxworks-tls.c: Likewise.
From-SVN: r279783
contrib/ChangeLog:
2019-12-16 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config-list.mk: Add msp430-elfbare.
gcc/ChangeLog:
2019-12-16 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config.gcc: s/msp430*-*-*/msp430-*-*.
Handle msp430-*-elfbare.
* config/msp430/msp430-devices.c (TARGET_SUBDIR): Define.
(_MSPMKSTR): Define.
(__MSPMKSTR): Define.
(rest_of_devices_path): Use TARGET_SUBDIR value in string.
* config/msp430/msp430.c (msp430_option_override): Error if
-fuse-cxa-atexit is used when it has been disabled at configure time.
* config/msp430/t-msp430: Define TARGET_SUBDIR when building
msp430-devices.o.
* doc/install.texi: Document msp430-*-elf and msp430-*-elfbare.
* doc/invoke.texi: Update documentation about which path devices.csv is
searched for.
gcc/testsuite/ChangeLog:
2019-12-16 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* g++.dg/init/dso_handle1.C: Require cxa_atexit support.
* g++.dg/init/dso_handle2.C: Likewise.
* g++.dg/other/cxa-atexit1.C: Likewise.
* gcc.target/msp430/msp430.exp: Update csv-using-installed.c test to
handle msp430-elfbare configuration.
libgcc/ChangeLog:
2019-12-16 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config.host: s/msp430*-*-elf/msp430-*-elf*.
Override default "extra_parts" variable.
* configure: Regenerate.
* configure.ac: Disable TM clone registry by default for
msp430-elfbare.
From-SVN: r279442
ChangeLog:
2019-12-11 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config-ml.in (msp430-*-*): Support --disable-no-exceptions configure
flag.
gcc/ChangeLog:
2019-12-11 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/msp430/msp430.h (STARTFILE_SPEC) [!fexceptions]: Use
crtbegin_no_eh.o if building for the C language.
[fno-exceptions]: Use crtbegin_no_eh.o if building for any language
except C.
(ENDFILE_SPEC) [!fexceptions]: Use crtend_no_eh.o if building for
the C language.
[fno-exceptions]: Use crtend_no_eh.o if building for any language
except C.
* config/msp430/t-msp430: Add -fno-exceptions multilib.
* doc/install.texi: Document --disable-no-exceptions multilib configure
option.
* doc/sourcebuild.texi: Document exceptions_enabled effective target.
gcc/testsuite/ChangeLog:
2019-12-11 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* lib/gcc-dg.exp: Add dg-prune messages for when exception handling is
disabled.
* lib/target-supports.exp (check_effective_target_exceptions_enabled):
New.
libgcc/ChangeLog:
2019-12-11 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config.host: Add crt{begin,end}_no_eh.o to "extra_parts".
* config.host (msp430*-*-elf): Add crt{begin,end}_no_eh.o to
"extra_parts".
From-SVN: r279246
2019-12-09 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* crtstuff.c (__do_global_dtors_aux): Check if USE_EH_FRAME_REGISTRY is
defined instead of its value.
From-SVN: r279125
2019-12-09 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* crtstuff.c (__do_global_dtors_aux): Wrap in #if so it's only defined
if it will have contents.
From-SVN: r279123
The gthr weak reference based single thread detection is unsafe with
static linking and in case of dynamic linking it's ineffective on musl
since pthread symbols are defined in libc.so.
(Ideally this should be fixed for all targets, since glibc plans to move
libpthread.so into libc.so too and users want to static link to pthread
without --whole-archive: PR87189.)
For now we have to explicitly opt out from the broken behaviour in the
config machinery of each target lib and libgcc was previously missed.
libgcc/ChangeLog:
2019-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com>
* config.host: Add t-gthr-noweak on *-*-musl*.
* config/t-gthr-noweak: New file.
From-SVN: r278399
Add the dynamic linker name and fix a type name to use the public name
instead of the glibc internal name.
gcc/ChangeLog:
2019-11-15 Szabolcs Nagy <szabolcs.nagy@arm.com>
* config/m68k/linux.h (MUSL_DYNAMIC_LINKER): Define.
libgcc/ChangeLog:
2019-11-15 Szabolcs Nagy <szabolcs.nagy@arm.com>
* config/m68k/linux-unwind.h (struct uw_ucontext): Use sigset_t instead
of __sigset_t.
From-SVN: r278312
2019-11-13 Jerome Lambourg <lambourg@adacore.com>
Doug Rupp <rupp@adacore.com>
Olivier Hainque <hainque@adacore.com>
gcc/
* config.gcc: Collapse the arm-vxworks entries into
a single arm-wrs-vxworks7* one, bpabi based. Update
the default cpu from arm8 to armv7-a
* config/arm/vxworks.h (CC1_SPEC): Simplify, knowing that
we always use ARM_UNWIND_INFO.
(DWARF2_UNWIND_INFO): Remove redefinition.
(ARM_TARGET2_DWARF_FORMAT): Likewise.
(VXWORKS_PERSONALITY): Define, to "llvm".
(VXWORKS_EXTRA_LIBS_RTP): Define, to "-lllvm".
libgcc/
* config.host: Collapse the arm-vxworks entries into
a single arm-wrs-vxworks7* one.
* config/arm/unwind-arm-vxworks.c: Update comments. Provide
__gnu_Unwind_Find_exidx and a weak dummy __cxa_type_match for
kernel modules, to be overriden by libstdc++ when we link with
it. Rely on externally provided __exidx_start/end.
Co-Authored-By: Doug Rupp <rupp@adacore.com>
Co-Authored-By: Olivier Hainque <hainque@adacore.com>
From-SVN: r278253
2019-11-12 Olivier Hainque <hainque@adacore.com>
libgcc/
* config/t-gthr-vxworksae: New file, add all the gthr-vxworks
sources except the cxx0x support to LIB2ADDEH. We don't support
cxx0x on AE/653.
* config/t-vxworksae: New file.
* config.host: Handle *-*-vxworksae: Add the two aforementioned
Makefile fragment files at their expected position in the tmake_file
list, in accordance with what is done for other VxWorks variants.
From-SVN: r278250
2019-11-12 Corentin Gay <gay@adacore.com>
Jerome Lambourg <lambourg@adacore.com>
Olivier Hainque <hainque@adacore.com>
libgcc/
* config/t-gthr-vxworks: New file, add all the gthr-vxworks
sources to LIB2ADDEH.
* config/t-vxworks: Remove adjustments to LIB2ADDEH.
* config/t-vxworks7: Likewise.
* config.host: Append a block at the end of the file to add the
t-gthr files to the tmake_file list for VxWorks after everything
else.
* config/vxlib.c: Rename as gthr-vxworks.c.
* config/vxlib-tls.c: Rename as gthr-vxworks-tls.c.
* config/gthr-vxworks.h: Simplify a few comments. Expose a TAS
API and a basic error checking API, both internal. Simplify the
__gthread_once_t type definition and initializers. Add sections
for condition variables support and for the C++0x thread support,
conditioned against Vx653 for the latter.
* config/gthr-vxworks.c (__gthread_once): Simplify comments and
implementation, leveraging the TAS internal API.
* config/gthr-vxworks-tls.c: Introduce an internal TLS data access
API, leveraging the general availability of TLS services in VxWorks7
post SR6xxx.
(__gthread_setspecific, __gthread_setspecific): Use it.
(tls_delete_hook): Likewise, and simplify the enter/leave dtor logic.
* config/gthr-vxworks-cond.c: New file. GTHREAD_COND variable
support based on VxWorks primitives.
* config/gthr-vxworks-thread.c: New file. GTHREAD_CXX0X support
based on VxWorks primitives.
Co-Authored-By: Jerome Lambourg <lambourg@adacore.com>
Co-Authored-By: Olivier Hainque <hainque@adacore.com>
From-SVN: r278249
2019-11-06 Jerome Lambourg <lambourg@adacore.com>
Olivier Hainque <hainque@adacore.com>
libgcc/
* config/vxcrtstuff.c: New file.
* config/t-vxcrtstuff: New Makefile fragment.
* config.host: Append t-vxcrtstuff to the tmake_file list
on all VxWorks ports using dwarf for table based EH.
gcc/
* config/vx-common.h (USE_TM_CLONE_REGISTRY): Remove
definition, pointless with a VxWorks specific version
of crtstuff.
(DWARF2_UNWIND_INFO): Conditionalize on !ARM_UNWIND_INFO.
* config/vxworks.h (VX_CRTBEGIN_SPEC, VX_CRTEND_SPEC):
New local macros, controlling the addition of vxworks specific
crtstuff objects depending on the EH mechanism and kind of
module being linked.
(VXWORKS_STARTFILE_SPEC, VXWORKS_ENDFILE_SPEC): Use them.
Co-Authored-By: Olivier Hainque <hainque@adacore.com>
From-SVN: r278248
gcc/
Support 64-bit double and 64-bit long double configurations.
PR target/92055
* config.gcc (tm_defines) [avr]: Set from --with-double=,
--with-long-double=.
* config/avr/t-multilib: Remove.
* config/avr/t-avr: Output of genmultilib.awk is now fully
dynamically generated and no more part of the repo.
(HAVE_DOUBLE_MULTILIB, HAVE_LONG_DOUBLE_MULTILIB): New variables.
Pass them down to...
* config/avr/genmultilib.awk: ...here and handle them.
* gcc/config/avr/avr.opt (-mdouble=, avr_double). New option and var.
(-mlong-double=, avr_long_double). New option and var.
* common/config/avr/avr-common.c (opts.h, diagnostic.h): Include.
(TARGET_OPTION_OPTIMIZATION_TABLE) <-mdouble=, -mlong-double=>:
Set default as requested by --with-double=
(TARGET_HANDLE_OPTION): Define to this...
(avr_handle_option): ...new hook worker.
* config/avr/avr.h (DOUBLE_TYPE_SIZE): Define to avr_double.
(LONG_DOUBLE_TYPE_SIZE): Define to avr_long_double.
(avr_double_lib): New proto for spec function.
(EXTRA_SPEC_FUNCTIONS) <double-lib>: Add.
(DRIVER_SELF_SPECS): Call %:double-lib.
* config/avr/avr.c (avr_option_override): Assert
sizeof(long double) >= sizeof(double) for the target.
* config/avr/avr-c.c (avr_cpu_cpp_builtins)
[__HAVE_DOUBLE_MULTILIB__, __HAVE_LONG_DOUBLE_MULTILIB__]
[__HAVE_DOUBLE64__, __HAVE_DOUBLE32__, __DEFAULT_DOUBLE__=]
[__HAVE_LONG_DOUBLE64__, __HAVE_LONG_DOUBLE32__]
[__HAVE_LONG_DOUBLE_IS_DOUBLE__, __DEFAULT_LONG_DOUBLE__=]:
New built-in define depending on --with-double=, --with-long-double=.
* config/avr/driver-avr.c (avr_double_lib): New spec function.
* doc/invoke.tex (AVR Options) <-mdouble=,-mlong-double=>: Doc.
* doc/install.texi (Cross-Compiler-Specific Options)
<--with-double=, --with-long-double=>: Doc.
libgcc/
Support 64-bit double and 64-bit long double configurations.
PR target/92055
* config/avr/t-avr (HOST_LIBGCC2_CFLAGS): Only add -DF=SF if
long double is a 32-bit type.
* config/avr/t-avrlibc: Copy double64 and long-double64
multilib(s) from the vanilla one.
* config/avr/t-copy-libgcc: New Makefile snip.
From-SVN: r277908
2019-11-04 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* crtstuff.c: Define USE_TM_CLONE_REGISTRY to 0 if it's undefined and
the target output object format is not ELF.
s/defined(USE_TM_CLONE_REGISTRY)/USE_TM_CLONE_REGISTRY.
From-SVN: r277775
Using -mno-fdiv gives linker errors unless we build the missing divide
routines in libgcc always. There is at least one university project
designing RISC-V parts without FP divide that wants to use the option.
libgcc/
* config/riscv/t-softfp32 (softfp_extra): Add FP divide routines
From-SVN: r277723
* config/pa/fptr.c (_dl_read_access_allowed): Change argument to
unsigned int. Adjust callers.
(__canonicalize_funcptr_for_compare): Change plabel type to volatile
unsigned int *. Load relocation offset before function pointer.
Add barrier to ensure ordering.
From-SVN: r277015
* config/pa/lib2funcs.S (__gcc_plt_call): Load branch target to %r21.
Load PIC register after branch target. Fix white space.
* config/pa/milli64.S ($$dyncall): Separate LINUX and non LINUX
implementations. Load PIC register after branch target. Don't
clobber function pointer when it points to function descriptor.
Use nullification instead of branch in LINUX implementation.
From-SVN: r276925
The DCache clean & ICache invalidation requirements for instructions
to be data coherence are discoverable through new fields in CTR_EL0.
Let's support the two bits if they are enabled, the CPU core will
not execute the unnecessary DCache clean or Icache Invalidation
instructions.
2019-09-25 Shaokun Zhang <zhangshaokun@hisilicon.com>
* config/aarch64/sync-cache.c (__aarch64_sync_cache_range): Add support for
CTR_EL0.IDC and CTR_EL0.DIC.
From-SVN: r276122
This is causing regressions when mixing with user code compiled in ARM mode.
2019-09-20 Christophe Lyon <christophe.lyon@st.com>
Revert:
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
* config/arm/unwind-arm.c (_Unwind_VRS_Set): Handle thumb-only
architecture.
From-SVN: r276001
This is the libgcc part of the interface -- providing the functions.
Rationale is provided at the top of libgcc/config/aarch64/lse.S.
* config/aarch64/lse-init.c: New file.
* config/aarch64/lse.S: New file.
* config/aarch64/t-lse: New file.
* config.host: Add t-lse to all aarch64 tuples.
From-SVN: r275967
Without this, when we are unwinding across a signal frame we can jump
to an even address which leads to an exception.
This is needed in __gnu_persnality_sigframe_fdpic() when restoring the
PC from the signal frame since the PC saved by the kernel has the LSB
bit set to zero.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
libgcc/
* config/arm/unwind-arm.c (_Unwind_VRS_Set): Handle thumb-only
architecture.
Co-Authored-By: Mickaël Guêné <mickael.guene@st.com>
From-SVN: r275575
The main difference with existing support is that function addresses
are function descriptor addresses instead. This means that all code
dealing with function pointers now has to cope with function
descriptors instead.
For the same reason, Linux kernel helpers can no longer be called by
dereferencing their address, so we implement wrappers that directly
call the kernel helpers.
When restoring a function address, we also have to restore the FDPIC
register value (r9).
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
gcc/
* ginclude/unwind-arm-common.h (unwinder_cache): Add reserved5
field.
libgcc/
* config/arm/linux-atomic.c (__kernel_cmpxchg): Add FDPIC support.
(__kernel_dmb): Likewise.
(__fdpic_cmpxchg): New function.
(__fdpic_dmb): New function.
* config/arm/unwind-arm.h (FDPIC_REGNUM): New define.
(gnu_Unwind_Find_got): New function.
(_Unwind_decode_typeinfo_ptr): Add FDPIC support.
* unwind-arm-common.inc (UCB_PR_GOT): New.
(funcdesc_t): New struct.
(get_eit_entry): Add FDPIC support.
(unwind_phase2): Likewise.
(unwind_phase2_forced): Likewise.
(__gnu_Unwind_RaiseException): Likewise.
(__gnu_Unwind_Resume): Likewise.
(__gnu_Unwind_Backtrace): Likewise.
* unwind-pe.h (read_encoded_value_with_base): Likewise.
libstdc++/
* libsupc++/eh_personality.cc (get_ttype_entry): Add FDPIC
support.
Co-Authored-By: Mickaël Guêné <mickael.guene@st.com>
From-SVN: r275568
In FDPIC, we need to make sure __do_global_dtors_aux and frame_dummy
are referenced by their address, not by pointers to the function
descriptors.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
libgcc/
* libgcc/crtstuff.c: Add support for FDPIC.
Co-Authored-By: Mickaël Guêné <mickael.guene@st.com>
From-SVN: r275567
The new arm-uclinuxfdpiceabi target behaves pretty much like
arm-linux-gnueabi. In order to enable the same set of features, we
have to update several configure scripts that generally match targets
like *-*-linux*: in most places, we add *-uclinux* where there is
already *-linux*, or uclinux* when there is already linux*.
In gcc/config.gcc and libgcc/config.host we use *-*-uclinuxfdpiceabi
because there is already a different behaviour for *-*uclinux* target.
In libtool.m4, we use uclinuxfdpiceabi in cases where ELF shared
libraries support is required, as uclinux does not guarantee that.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
config/
* futex.m4: Handle *-uclinux*.
* tls.m4 (GCC_CHECK_TLS): Likewise.
gcc/
* config.gcc: Handle *-*-uclinuxfdpiceabi.
libatomic/
* configure.tgt: Handle arm*-*-uclinux*.
* configure: Regenerate.
libgcc/
* config.host: Handle *-*-uclinuxfdpiceabi.
libitm/
* configure.tgt: Handle *-*-uclinux*.
* configure: Regenerate.
* libtool.m4: Handle uclinuxfdpiceabi.
From-SVN: r275564
This re-enables -msave-restore for shared libraries, and uses the
t-slibgcc-libgcc file to get the save-restore routines included directly
in shared libraries so that we don't need to indirect through the PLT
to reach them, which doesn't work.
gcc/
* config/riscv/riscv.c (riscv_option_override): Revert 2019-08-30
change.
libgcc/
* config.host (riscv*-*-linux*): Add t-slibgcc-libgcc to tmake_file.
(riscv*-*-freebsd*): Likewise.
From-SVN: r275478
gcc/ChangeLog:
* config.gcc (hppa*-*-netbsd*): New target.
* config/pa/pa-netbsd.h: New file.
* config/pa/pa32-netbsd.h: New file.
libgcc/ChangeLog:
* config.host (hppa*-*-netbsd*): New case.
* config/pa/t-netbsd: New file.
Co-Authored-By: Matthew Green <mrg@eterna.com.au>
Co-Authored-By: Maya Rashish <coypu@sdf.org>
Co-Authored-By: Nick Hudson <nick@nthcliff.demon.co.uk>
From-SVN: r273933
At present it is possible to call the CMSE functions for checking
addresses (such as cmse_check_address_range) and forget to check/use
the return value. This patch makes the interfaces more robust against
programmer error by marking these functions with the warn_unused_result
attribute. With this set, any use of these functions that does not use
the result will produce a warning.
This produces a warning on default warn levels when the result of the
cmse functions is not used.
For the following function:
void foo()
{
int *data;
cmse_check_address_range((int*)data, 0, 0);
}
The following warning is emitted:
warning: ignoring return value of 'cmse_check_address_range' declared
with attribute 'warn_unused_result' [-Wunused-result]
6 | cmse_check_address_range((int*)data, 0, 0);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gcc/ChangeLog:
2019-07-31 Joel Hutton <Joel.Hutton@arm.com>
* config/arm/arm_cmse.h (cmse_nonsecure_caller): Add
warn_unused_result attribute.
(cmse_check_address_range): Add warn_unused_result attribute.
libgcc/ChangeLog:
2019-07-31 Joel Hutton <Joel.Hutton@arm.com>
* config/arm/cmse.c (cmse_check_address_range): Add
warn_unused_result attribute.
2019-07-31 Joel Hutton <Joel.Hutton@arm.com>
* gcc.target/arm/cmse/cmse-17.c: New test.
From-SVN: r273924
2019-07-22 Martin Liska <mliska@suse.cz>
* config/avr/avr.c (avr_asm_output_aligned_decl_common): Update
comment.
* toplev.c (compile_file): Do not emit __gnu_lto_v1 symbol.
2019-07-22 Martin Liska <mliska@suse.cz>
* config/pa/stublib.c: Remove stub symbol __gnu_lto_v1.
* config/pa/t-stublib: Likewise.
2019-07-22 Martin Liska <mliska@suse.cz>
* simple-object-elf.c (simple_object_elf_copy_lto_debug_sections):
Do not search for gnu_lto_v1, but search for first '\0'.
From-SVN: r273662
Fixes bad assembly logic with software divide as reported by Richard Selvaggi.
Also, add a basic test to verify the soft math works when enabled.
gcc/testsuite/ChangeLog:
PR target/90362
* gcc.target/or1k/div-mul-3.c: New test.
libgcc/ChangeLog:
PR target/90362
* config/or1k/lib1funcs.S (__udivsi3): Change l.sfeqi
to l.sfeq and l.sfltsi to l.sflts equivalents as the immediate
instructions are not available on every processor. Change a
l.bnf to l.bf to fix logic issue.
From-SVN: r273648
t-darwin8 is nolonger needed (or present) for pre-10.4 powerpc, so remove
the reference.
2019-07-04 Iain Sandoe <iain@sandoe.co.uk>
* config.host: Remove reference to t-darwin8.
From-SVN: r273091
The library handling and some of the options for creating the crts for
the older PPC Darwin versions had bit-rotted somewhat. This adjusts the
build criteria for the crts to avoid newer ld64 versions warnings about
mismatches in build and object versions.
Added to some of the comments that it's documented why the specs are as
they are.
2019-07-03 Iain Sandoe <iain@sandoe.co.uk>
gcc/
* config/darwin.h (REAL_LIBGCC_SPEC): Adjust for earlier Darwin.
(STARTFILE_SPEC): Split crt3 into a separate spec.
(DARWIN_EXTRA_SPECS): Add crt2 and crt3 spec.
(DARWIN_CRT2_SPEC): New.
(DARWIN_CRT3_SPEC): New.
(MIN_LD64_OMIT_STUBS): Revise to 62.1.
* config/rs6000/darwin.h (DARWIN_CRT2_SPEC): Revise conditions.
(DARWIN_CRT3_SPEC): New.
libgcc/
2019-07-03 Iain Sandoe <iain@sandoe.co.uk>
* config.host (powerpc-*-darwin*,powerpc64-*-darwin*): Revise crt
list.
* config/rs6000/t-darwin: Build crt3_2 for older systems. Revise
mmacosx-version-min for crts to run across all system versions.
* config/rs6000/t-darwin64 (LIB2ADD): Remove.
* config/t-darwin: Revise mmacosx-version-min for crts to run across
system versions >= 10.4.
From-SVN: r273016
2019-07-03 Martin Liska <mliska@suse.cz>
* gcc.dg/tree-prof/val-prof-2.c: Update scanned pattern
as we do now better.
2019-07-03 Martin Liska <mliska@suse.cz>
* libgcov-merge.c (merge_single_value_set): Support N values.
* libgcov-profiler.c (__gcov_one_value_profiler_body): Likewise.
From-SVN: r273004
We have been including this in libgcc, which means that we have to append
-lgcc even when using shared libgcc. In preparation for revision of libgcc
split this into an endfile.
gcc/
2019-06-25 Iain Sandoe <iain@sandoe.co.uk>
* config/rs6000/darwin.h (ENDFILE_SPEC): New.
libgcc/
2019-06-25 Iain Sandoe <iain@sandoe.co.uk>
* config.host: Add libef_ppc.a to the extra files for powerpc-darwin.
* config/rs6000/t-darwin: (PPC_ENDFILE_SRC, PPC_ENDFILE_OBJS): New.
Build objects for the out of line save/restore register functions
so that they can be used for any supported Darwin version.
* config/t-darwin: Default the build Darwin version to Darwin8
(MacOS 10.4).
From-SVN: r272659
2019-06-25 Martin Liska <mliska@suse.cz>
* libgcov-driver-system.c (replace_filename_variables): Do not
call strlen with NULL argument.
From-SVN: r272650
Atm we see:
...
libgcc/config/nvptx/crt0.c:36:1: warning: no previous prototype for \
‘__main’ [-Wmissing-prototypes]
...
Fix this by adding the prototype.
Build and reg-tested on nvptx.
Build and reg-tested on x86_64 with nvptx accelerator.
2019-06-18 Tom de Vries <tdevries@suse.de>
* config/nvptx/crt0.c (__main): Declare.
From-SVN: r272412
gcc/ChangeLog:
2019-06-16 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/msp430/msp430.c (msp430_expand_helper): Setup arguments which
describe how to perform MSPABI compliant 64-bit shift.
* config/msp430/msp430.md (ashldi3): New define_expand.
(ashrdi3): New define_expand.
(lshrdi3): New define_expand.
libgcc/ChangeLog:
2019-06-16 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/msp430/slli.S (__mspabi_sllll): New library function for
performing a logical left shift of a 64-bit value.
* config/msp430/srai.S (__mspabi_srall): New library function for
performing a arithmetic right shift of a 64-bit value.
* config/msp430/srll.S (__mspabi_srlll): New library function for
performing a logical right shift of a 64-bit value.
gcc/testsuite/ChangeLog:
2019-06-16 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* gcc.target/msp430/mspabi_sllll.c: New test.
* gcc.target/msp430/mspabi_srall.c: New test.
* gcc.target/msp430/mspabi_srlll.c: New test.
* gcc.c-torture/execute/shiftdi-2.c: New test.
From-SVN: r272360
This is a roll-up of a set of changes needed to support the Arm EABI on NetBSD.
2019-06-14 Matt Thomas <matt@3am-software.com>
Matthew Green <mrg@eterna.com.au>
Nick Hudson <skrll@netbsd.org>
Maya Rashish <coypu@sdf.org>
Richard Earnshaw <rearnsha@arm.com>
gcc:
* config.gcc (arm*-*-netbsdelf*) Add support for EABI configuration.
* config.host (arm*-*-netbsd*): Use driver-arm.o on native NetBSD.
* config/arm/netbsd-eabi.h: New file.
* config/arm/netbsd-elf.h (TARGET_OS_CPP_BUILTINS): Undefine before
redefining.
(SUBTARGET_EXTRA_ASM_SPEC): Don't pass -matpcs to the assembler.
* config/netbsd-elf.h (NETBSD_LINK_LD_ELF_SO_SPEC): New define.
(NETBSD_SUBTARGET_EXTRA_SPECS): New define.
(SUBTARGET_EXTRA_SPECS): Define to NETBSD_SUBTARGET_EXTRA_SPECS.
libatomic:
* configure.tgt (arm*): Handle NetBSD in the same way as FreeBSD.
libgcc:
* config.host (arm*-*-netbsdelf*): Add support for EABI configurations.
* config/arm/t-netbsd (LIB1ASMFUNCS): Add some additional assembler
functions to build.
* config/arm/t-netbsd-eabi: New file.
Co-Authored-By: Matthew Green <mrg@eterna.com.au>
Co-Authored-By: Maya Rashish <coypu@sdf.org>
Co-Authored-By: Nick Hudson <skrll@netbsd.org>
Co-Authored-By: Richard Earnshaw <rearnsha@arm.com>
From-SVN: r272290
libgcc/ChangeLog:
2019-06-12 Dimitar Dimitrov <dimitar@dinux.eu>
* config.host: Add PRU target.
* config/pru/asri.c: New file.
* config/pru/eqd.c: New file.
* config/pru/eqf.c: New file.
* config/pru/ged.c: New file.
* config/pru/gef.c: New file.
* config/pru/gtd.c: New file.
* config/pru/gtf.c: New file.
* config/pru/led.c: New file.
* config/pru/lef.c: New file.
* config/pru/lib2bitcountHI.c: New file.
* config/pru/lib2divHI.c: New file.
* config/pru/lib2divQI.c: New file.
* config/pru/lib2divSI.c: New file.
* config/pru/libgcc-eabi.ver: New file.
* config/pru/ltd.c: New file.
* config/pru/ltf.c: New file.
* config/pru/mpyll.S: New file.
* config/pru/pru-abi.h: New file.
* config/pru/pru-asm.h: New file.
* config/pru/pru-divmod.h: New file.
* config/pru/sfp-machine.h: New file.
* config/pru/t-pru: New file.
From-SVN: r272204
When libgcc is built on Darwin, it is usually built for the earliest potential
target (Darwin8, 10.4). Build for that revision default to assuming that the
processor might be G3 (without vector ops) and there is an outlined function
used for save/restore that checks whether the processor is G3 or G4+ at run-
time. However, the unwinder itself needs to be built with the assumption of
vector usage so that the relevant outlined functions are called.
2019-06-06 Iain Sandoe <iain@sandoe.co.uk>
* config/rs6000/t-darwin: Ensure that the unwinder is built with
altivec enabled.
From-SVN: r272017
* config/ia64/crtbegin.S (__dso_handle): Put in .sdata/.sbss
rather than .data/.bss so it can be accessed via gp-relative
addressing.
From-SVN: r271977
* config.gcc (rx-*-linux*): New target.
* config/rx/elf.opt: New file.
* config/rx/linux.h: Likewise.
* config/rx/t-linux: Likewise.
* config/rx/rx.c (TARGET_SAVE_ACC_REGISTER): If not defined,
make it zero.
* config/rx/rx.h (ASM_APP_ON): Allow to be overridden.
(ASM_APP_OFF): Likewise.
* config/rx/rx.opt: Drop -msim and -mas100-syntax, they were
moved elsewhere.
* config.host (rx-*-linux*): Add new case.
* config/rx/t-rx (HOST_LIBGCC2_CFLAGS): Force DFmode to SFmode.
From-SVN: r271748
This patch is updating all soft-fp from glibc, most changes are
copyright years update, and changes other than years update are
* soft-fp/extenddftf2.c: Use "_FP_W_TYPE_SIZE < 64" to check if
4_FP_W_TYPEs are used for IEEE quad precision.
* soft-fp/extendhftf2.c: Likewise.
* soft-fp/extendsftf2.c: Likewise.
* soft-fp/extendxftf2.c: Likewise.
* soft-fp/trunctfdf2.c: Likewise.
* soft-fp/trunctfhf2.c: Likewise.
* soft-fp/trunctfsf2.c: Likewise.
* soft-fp/trunctfxf2.c: Likewise.
* config/rs6000/ibm-ldouble.c: Likewise.
From-SVN: r271327
The asm file fails to build if we use a modern assembler
which checks that the machine is consistent with the
filetype. Fixed by adjusting in a similar manner to
other assembler.
libgcc/
2019-05-12 Iain Sandoe <iain@sandoe.co.uk>
* config/rs6000/darwin-vecsave.S: Set .machine appropriately.
From-SVN: r271111
Jakub Jelinek
Sandra Loosemore
Martin Liska
Claudiu Zissulescu
Maciej W. Rozycki
Dragan Mladjenovic
Hans-Peter Nilsson
John David Anglin
Mihail Ionescu
Georg-Johann Lay
Kwok Cheung Yeung
Olivier Hainque
Jakub Jelinek
Jozef Lawrynowicz
Jozef Lawrynowicz
Szabolcs Nagy
Szabolcs Nagy
Jerome Lambourg
Doug Rupp
Corentin Gay
Oleg Endo
Jim Wilson
Richard Henderson
Shaokun Zhang
Christophe Lyon
Jose E. Marchesi
Ulrich Weigand
Hongtao Liu
Matt Thomas
Joel Hutton
Stafford Horne
Iain Sandoe
Ilia Diachkov
Iain Sandoe
Andrew Stubbs
Tom de Vries
Matthew Green
Dimitar Dimitrov
Yoshinori Sato
James Clarke
David Edelsohn
Sam Tebbs
Rainer Orth
H.J. Lu