2015-03-28 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/65596
* io/transfer.c (data_transfer_init): If in namelist mode and
delimiter is not specified, set it to DELIM_QUOTE, independent
of -std.
* io/unit.c (init_units): Set flags.delim to the correct
initial value of DELIM_UNSPECIFIED.
From-SVN: r221753
2014-11-10 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/47007
PR libfortran/61847
* config.h.in: Regenerated.
* configure: Regenerated.
* configure.ac (AC_CHECK_HEADERS_ONCE): Check for xlocale.h.
(AC_CHECK_FUNCS_ONCE): Check for newlocale, freelocale, uselocale,
strerror_l.
* io/io.h (locale.h): Include.
(xlocale.h): Include if present.
(c_locale): New variable.
(old_locale): New variable.
(old_locale_ctr): New variable.
(old_locale_lock): New variable.
(st_parameter_dt): Add old_locale member.
* io/transfer.c (data_transfer_init): Set locale to "C" if doing
formatted transfer.
(finalize_transfer): Reset locale to previous.
* io/unit.c (c_locale): New variable.
(old_locale): New variable.
(old_locale_ctr): New variable.
(old_locale_lock): New variable.
(init_units): Init c_locale, init old_locale_lock.
(close_units): Free c_locale.
* runtime/error.c (locale.h): Include.
(xlocale.h): Include if present.
(gf_strerror): Use strerror_l if available. Reset locale to
LC_GLOBAL_LOCALE for strerror_r branch.
2014-11-10 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/47007
PR libfortran/61847
* gfortran.texi: Add note about locale issues to thread-safety
section.
From-SVN: r217273
2014-10-05 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/63460
* io/unit.c (init_units): Initialize the DELIM flag to
UNSPECIFIED for the STDIN unit so that the flag is
correctly set later.
From-SVN: r215908
2014-03-12 Jerry DeLisle <jvdelisle@gcc.gnu>
PR libfortran/38199
* io/read.c (read_decimal): Quickly skip spaces to avoid calls
to next_char.
* io/unit.c (is_trim_ok): New helper function to check various
conditions to see if its OK to trim the internal unit string.
(get_internal_unit): Use LEN_TRIM to shorten selected internal
unit strings for optimizing READ. Enable this optimization for
formatted READ.
* io/list_read.c (finish_list_read): Don't call eat_line for
internal units.
From-SVN: r208528
2014-03-03 Jerry DeLisle <jvdelisle@gcc.gnu>
PR libfortran/60148
* io/inquire.c (inquire_via_unit): In the case of
DELIM_UNSPECIFIED set inquire return string to "NONE".
* io/list_read.c (read_character): In the case of DELIM_NONE and
namelists, complete the character read using the namelist
variable length.
* io/open.c (new_unit): Don't set delim status to none if not
specified so that DELIM_UNSPECIFIED can be used later.
* io/transfer.c (data_transfer_init): For namelist I/O, if the
unit delim status is unspecified set the current status to quote.
Otherwise, set current status to the unit status.
* io/unit.c (get_internel_unit, init_unit): Remember to set
flags_delim initially to DELIM_UNSPECIFIED so defaults come out
correctly.
* io/write.c (write_character): Add a new function argument
"mode" to signify that raw output is to be used vs output with
delimiters. If the mode is set to DELIM (1) proceed with
delimiters. (list_formatted_write_scalar): Write the separator
only if a delimiter was previously specified. Update the call to
write_character with the mode argument given.
(namelist_write_newline): Use the mode argument. (nml_write_obj):
Use the mode argument. Remove use of tmp_delim. Write the
semi-colon or comma correctly only when needed with using
delimiters. Cleanup whitespace.
(namelist_write): If delim is not specified in namelist I/O,
default to using quotes. Get rid of the tmp_delim variable and
use the new mode argument in write_character.
From-SVN: r208302
2012-04-17 Tobias Burnus <burnus@net-b.de>
PR libfortran/38199
PR libfortran/50673
* io/unit.c (get_internal_unit): Properly check for the presence
of the format string.
From-SVN: r186548
2012-04-15 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/38199
PR libfortran/50673
* intrinsics/string_intriniscs_inc.c (string_len_trim):
Remove prototypes for string_len_trim and move to...
* libgfortran.h (string_len_trim): ... here and
(string_len_trim_char4): ...here.
* io/unit.c: For non-array internal arrays where we do reading,
adjust the record length to the last non-blank character.
* io/unix.c: Fix typo.
From-SVN: r186466
2012-03-15 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/52434
PR libfortran/48878
PR libfortran/38199
* io/unit.c (get_internal_unit): Default to ROUND_UNSPECIFIED.
(init_units): Likewise.
* io/write_float.def (determine_precision): New function.
(output_float): Take into account buffer with %f format, no need
for our own rounding if unspecified or processor specified
rounding.
(DTOA): Simplify format string, add parameters.
(FDTOA): New macros similar to DTOA, but using %f format.
(OUTPUT_FLOAT_FMT_G): Stack allocate newf, determine correct
precision and fill buffer.
(EN_PREC): New macro.
(determine_en_precision): New function.
(WRITE_FLOAT): For G format, move buffer filling into
output_float_FMT_G, use FDTOA for F format.
(write_float): Increase buffer due to F format.
testsuite ChangeLog:
2012-03-15 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/52434
PR libfortran/48878
PR libfortran/38199
* gfortran.dg/edit_real_1.f90: Don't assume roundTiesToAway.
* gfortran.dg/round_1.f03: Likewise.
From-SVN: r185433
libgfortran ChangeLog:
2011-10-31 Janne Blomqvist <jb@gcc.gnu.org>
* io/inquire.c (inquire_via_unit): Check whether we're at the
beginning or end if the position is unspecified. If the position
is not one of the 3 standard ones, return unspecified.
* io/io.h (update_position): Remove prototype.
* io/transfer.c (next_record): Set the position to unspecified,
letting inquire figure it out more exactly when needed.
* io/unit.c (update_position): Remove function.
testsuite ChangeLog:
2011-10-31 Janne Blomqvist <jb@gcc.gnu.org>
* gfortran.dg/inquire_5.f90: Update testcase to match the standard
and current implementation.
From-SVN: r180703
2011-10-31 Janne Blomqvist <jb@gcc.gnu.org>
* io/file_pos.c (st_rewind): Handle regular and special files
identically.
* io/intrinsics.c (fseek_sub): Don't check whether we think the
file is seekable, just do what the caller says.
* io/transfer.c (skip_record): First try to seek, then fallback to
reading and throwing away what we read.
* io/unit.c (update_position): Don't check whether file is
seekable, just try to do what we're told.
(unit_truncate): Likewise.
* io/unix.c (struct unix_stream): Remove special_file flag.
(buf_flush): Remove code for handling unseekable files.
(buf_seek): Likewise.
(fd_to_stream): Use buffered IO only for regular files.
(file_length): Remove is_seekable() call.
(is_seekable): Remove function.
(is_special): Likewise.
* io/unix.h: Remove prototypes for is_seekable and is_special.
From-SVN: r180701
Change "if (E) free (E);" to "free (E);" everywhere except in the
libgo/, intl/, zlib/ and classpath/ directories.
Also transform equivalent variants like
"if (E != NULL) free (E);" and allow an extra cast on the
argument to free. Otherwise, the tested and freed "E"
expressions must be identical, modulo white space.
From-SVN: r172785
2010-07-16 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/37077
* io/read.c (read_default_char4): Add support for reading into a
kind-4 character variable from a character(kind=4) internal unit.
* io/io.h (read_block_form4): Add prototype.
* io/unit.c (get_internal_unit): Add call to fbuf_init.
(free_internal_unit): Add call to fbuf_destroy. (get_unit): Fix
whitespace.
* io/transfer.c (read_sf_internal): Use fbuf_alloc to allocate a string
to recieve the wide characters translated to single byte chracters.
(read_block_form): Fix whitespace. (read_block_form4): New function to
read from a character(kind=4) internal unit into a character(kind=4)
variable. (read_block_direct): Fix whitespace. (write_block): Fix
whitespace. (formatted_transfer_scalar_read): Likewise.
(formatted_transfer_scalar_write): Likewise.
* io/write.c (write_character): Add support for list directed write of
a kind=1 character string to a character(kind=4) internal unit.
From-SVN: r162260
2010-07-12 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/37077
* io/read.c: Fix comment.
* io/io.h (is_char4_unit): New macro.
* io/unit.c (get_internal_unit): Call new function open_internal4.
* io/unix.c (mem_alloc_r4): New function. (mem_alloc_w4): New function.
(mem_read4): New function, temporary stub. (mem_write4): New function.
(open_internal4): New function to set stream pointers to use the new
mem functions.
* io/transfer.c (write_block): Use new mem_alloc_w4 to access internal
units of kind=4.
* io/unix.h: Add prototypes for open_internal4, mem_alloc_w4, and
mem_alloc_r4.
* io/write.c (memset4): New helper function. (memcpy4): New helper
function. (write_default_char4): Use new helper functions.
(write_a): Likewise. (write_l): Likewise. (write_boz): Likewise.
(write_decimal): Likewise. (write_x): Likewise.
(write_integer): Likewise.
* io/write_float.def (output_float): Add code blocks to handle internal
unit kind=4 output utilizing gfc_char4_t pointers. (write_infnan): Use
new helper functions. (OUTPUT_FLOAT_FMT_G): Update this macro likewise.
From-SVN: r162123
2009-09-28 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/35862
* io.h (gfc_unit): Add round_status.
(format_token): Add enumerators for rounding format specifiers.
* transfer.c (round_opt): New options table.
(formatted_transfer_scalar_read): Add set round_status for each rounding
format token. (formatted_transfer_scalar_write): Likewise.
* format.c (format_lex): Tokenize the rounding format specifiers.
(parse_format_list): Parse the rounding format specifiers.
* write_float.def (outout_float): Modify rounding code to use new
variable rchar to set the appropriate rounding. Fix some whitespace.
* unit.c (get_internal_unit): Initialize rounding mode for internal
units. (init_units): Likewise.
From-SVN: r152263
2009-06-07 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/40008
* libgfortran.h: Define IOPARM_OPEN_HAS_NEWUNIT.
* io/open.c (st_open): Don't error on negative unit number if NEWUNIT
was specified. If NEWUNIT is specified, call new function to get the
unique unit number and assign it.
* io/io.h (st_parameter_open): Add pointer to newunit. Add prototype for
next_available_newunit. Add prototype for new function,
get_unique_unit_number.
* io/unit.c: Declare next_available_newunit. Define the first newunit
number. (init_units): Initialize next_available_unit.
(get_unique_unit_number): New function. Fix whitespace and comments.
* io/transfer.c (data_transfer_init): Update error message to not be
specific to OPEN statements.
From-SVN: r148253
2009-04-08 Janne Blomqvist <jb@gcc.gnu.org>
* io/open.c (already_open): Test for POSIX close return value.
* io/unit.c (close_unit_1): Likewise.
* io/unix.c (raw_close): Return 0 for success for preconnected units.
From-SVN: r145761
2009-04-05 Daniel Kraft <d@domob.eu>
PR fortran/38654
* io/read.c (read_f): Reworked to speed up floating point parsing.
(convert_real): Use pointer-casting instead of memcpy and temporaries.
2009-04-05 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/37754
* io/io.h (format_hash_entry): New structure for hash table.
(format_hash_table): The hash table itself.
(free_format_data): Revise function prototype.
(free_format_hash_table, init_format_hash,
free_format_hash): New function prototypes.
* io/unit.c (close_unit_1): Use free_format_hash_table.
* io/transfer.c (st_read_done, st_write_done): Free format data if
internal unit.
* io/format.c (free_format_hash_table): New function that frees any
memory allocated previously for cached format data.
(reset_node): New static helper function to reset the format counters
for a format node.
(reset_fnode_counters): New static function recursively calls reset_node
to traverse the fnode tree.
(format_hash): New simple hash function based on XOR, probabalistic,
tosses collisions.
(save_parsed_format): New static function to save the parsed format
data to use again.
(find_parsed_format): New static function searches the hash table
looking for a match.
(free_format_data): Revised to accept pointer to format data rather than
the dtp pointer so that the function can be used in more places.
(format_lex): Editorial.
(parse_format_list): Set flag used to determine of format data hashing
is to be used. Internal units are not persistent enough for this.
(revert): Move to ne location in file.
(parse_format): Use new functions to look for previously parsed
format strings and use them rather than re-parse. If not found, saves
the parsed format data for later use.
2009-04-05 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/37754
* io/transfer.c (formatted_transfer_scalar): Remove this function by
factoring it into two new functions, one for read and one for write,
eliminating all the conditionals for read or write mode.
(formatted transfer_scalar_read): New function.
(formatted transfer_scalar_write): New function.
(formatted_transfer): Use new functions.
2009-04-05 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/25561 libfortran/37754
* io/io.h (struct stream): Define new stream interface function
pointers, and inline functions for accessing it.
(struct fbuf): Use int instead of size_t, remove flushed element.
(mem_alloc_w): New prototype.
(mem_alloc_r): New prototype.
(stream_at_bof): Remove prototype.
(stream_at_eof): Remove prototype.
(file_position): Remove prototype.
(flush): Remove prototype.
(stream_offset): Remove prototype.
(unit_truncate): New prototype.
(read_block_form): Change to return pointer, int* argument.
(hit_eof): New prototype.
(fbuf_init): Change prototype.
(fbuf_reset): Change prototype.
(fbuf_alloc): Change prototype.
(fbuf_flush): Change prototype.
(fbuf_seek): Change prototype.
(fbuf_read): New prototype.
(fbuf_getc_refill): New prototype.
(fbuf_getc): New inline function.
* io/fbuf.c (fbuf_init): Use int, get rid of flushed.
(fbuf_debug): New function.
(fbuf_reset): Flush, and return position offset.
(fbuf_alloc): Simplify, don't flush, just realloc.
(fbuf_flush): Make usable for read mode, salvage remaining bytes.
(fbuf_seek): New whence argument.
(fbuf_read): New function.
(fbuf_getc_refill): New function.
* io/file_pos.c (formatted_backspace): Use new stream interface.
(unformatted_backspace): Likewise.
(st_backspace): Make sure format buffer is reset, use new stream
interface, use unit_truncate.
(st_endfile): Likewise.
(st_rewind): Likewise.
* io/intrinsics.c: Use new stream interface.
* io/list_read.c (push_char): Don't use u.p.scratch, use realloc
to resize.
(free_saved): Don't check u.p.scratch.
(next_char): Use new stream interface, use fbuf_getc() for external files.
(finish_list_read): flush format buffer.
(nml_query): Update to use modified interface:s
* io/open.c (test_endfile): Use new stream interface.
(edit_modes): Likewise.
(new_unit): Likewise, set bytes_left to 1 for stream files.
* io/read.c (read_l): Use new read_block_form interface.
(read_utf8): Likewise.
(read_utf8_char1): Likewise.
(read_default_char1): Likewise.
(read_utf8_char4): Likewise.
(read_default_char4): Likewise.
(read_a): Likewise.
(read_a_char4): Likewise.
(read_decimal): Likewise.
(read_radix): Likewise.
(read_f): Likewise.
* io/transfer.c (read_sf): Use fbuf_read and mem_alloc_r, remove
usage of u.p.line_buffer.
(read_block_form): Update interface to return pointer, use
fbuf_read for direct access.
(read_block_direct): Update to new stream interface.
(write_block): Use mem_alloc_w for internal I/O.
(write_buf): Update to new stream interface.
(formatted_transfer_scalar): Don't use u.p.line_buffer, use
fbuf_seek for external files.
(us_read): Update to new stream interface.
(us_write): Likewise.
(data_transfer_init): Always check if we switch modes and flush.
(skip_record): Use new stream interface, fix comparison.
(next_record_r): Check for and reset u.p.at_eof, use new stream
interface, use fbuf_getc for spacing.
(write_us_marker): Update to new stream interface, don't inline.
(next_record_w_unf): Likewise.
(sset): New function.
(next_record_w): Use new stream interface, use fbuf for printing
newline.
(next_record): Use new stream interface.
(finalize_transfer): Remove sfree call, use new stream interface.
(st_iolength_done): Don't use u.p.scratch.
(st_read): Don't check for end of file.
(st_read_done): Don't use u.p.scratch, use unit_truncate.
(hit_eof): New function.
* io/unit.c (init_units): Always init fbuf for formatted units.
(update_position): Use new stream interface.
(unit_truncate): New function.
(finish_last_advance_record): Use fbuf to print newline.
* io/unix.c: Remove unused SSIZE_MAX macro.
(BUFFER_SIZE): Make static const variable rather than macro.
(struct unix_stream): Remove dirty_offset, len, method,
small_buffer. Order elements by decreasing size.
(struct int_stream): Remove.
(move_pos_offset): Remove usage of dirty_offset.
(reset_stream): Remove.
(do_read): Rename to raw_read, update to match new stream
interface.
(do_write): Rename to raw_write, update to new stream interface.
(raw_seek): New function.
(raw_tell): New function.
(raw_truncate): New function.
(raw_close): New function.
(raw_flush): New function.
(raw_init): New function.
(fd_alloc): Remove.
(fd_alloc_r_at): Remove.
(fd_alloc_w_at): Remove.
(fd_sfree): Remove.
(fd_seek): Remove.
(fd_truncate): Remove.
(fd_sset): Remove.
(fd_read): Remove.
(fd_write): Remove.
(fd_close): Remove.
(fd_open): Remove.
(fd_flush): Rename to buf_flush, update to new stream interface
and unix_stream.
(buf_read): New function.
(buf_write): New function.
(buf_seek): New function.
(buf_tell): New function.
(buf_truncate): New function.
(buf_close): New function.
(buf_init): New function.
(mem_alloc_r_at): Rename to mem_alloc_r, change prototype.
(mem_alloc_w_at): Rename to mem_alloc_w, change prototype.
(mem_read): Change to match new stream interface.
(mem_write): Likewise.
(mem_seek): Likewise.
(mem_tell): Likewise.
(mem_truncate): Likewise.
(mem_close): Likewise.
(mem_flush): New function.
(mem_sfree): Remove.
(empty_internal_buffer): Cast to correct type.
(open_internal): Use correct type, init function pointers.
(fd_to_stream): Test whether to open file as buffered or raw.
(output_stream): Remove mode set.
(error_stream): Likewise.
(flush_all_units_1): Use new stream interface.
(flush_all_units): Likewise.
(stream_at_bof): Remove.
(stream_at_eof): Remove.
(file_position): Remove.
(file_length): Update logic to use stream interface.
(flush): Remove.
(stream_offset): Remove.
* io/write.c (write_utf8_char4): Use int instead of size_t.
(write_x): Extra safety check.
(namelist_write_newline): Use new stream interface.
From-SVN: r145571
2009-03-22 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/25561 libfortran/37754
* io/io.h (struct stream): Define new stream interface function
pointers, and inline functions for accessing it.
(struct fbuf): Use int instead of size_t, remove flushed element.
(mem_alloc_w): New prototype.
(mem_alloc_r): New prototype.
(stream_at_bof): Remove prototype.
(stream_at_eof): Remove prototype.
(file_position): Remove prototype.
(flush): Remove prototype.
(stream_offset): Remove prototype.
(unit_truncate): New prototype.
(read_block_form): Change to return pointer, int* argument.
(hit_eof): New prototype.
(fbuf_init): Change prototype.
(fbuf_reset): Change prototype.
(fbuf_alloc): Change prototype.
(fbuf_flush): Change prototype.
(fbuf_seek): Change prototype.
(fbuf_read): New prototype.
(fbuf_getc_refill): New prototype.
(fbuf_getc): New inline function.
* io/fbuf.c (fbuf_init): Use int, get rid of flushed.
(fbuf_debug): New function.
(fbuf_reset): Flush, and return position offset.
(fbuf_alloc): Simplify, don't flush, just realloc.
(fbuf_flush): Make usable for read mode, salvage remaining bytes.
(fbuf_seek): New whence argument.
(fbuf_read): New function.
(fbuf_getc_refill): New function.
* io/file_pos.c (formatted_backspace): Use new stream interface.
(unformatted_backspace): Likewise.
(st_backspace): Make sure format buffer is reset, use new stream
interface, use unit_truncate.
(st_endfile): Likewise.
(st_rewind): Likewise.
* io/intrinsics.c: Use new stream interface.
* io/list_read.c (push_char): Don't use u.p.scratch, use realloc
to resize.
(free_saved): Don't check u.p.scratch.
(next_char): Use new stream interface, use fbuf_getc() for external files.
(finish_list_read): flush format buffer.
(nml_query): Update to use modified interface:s
* io/open.c (test_endfile): Use new stream interface.
(edit_modes): Likewise.
(new_unit): Likewise, set bytes_left to 1 for stream files.
* io/read.c (read_l): Use new read_block_form interface.
(read_utf8): Likewise.
(read_utf8_char1): Likewise.
(read_default_char1): Likewise.
(read_utf8_char4): Likewise.
(read_default_char4): Likewise.
(read_a): Likewise.
(read_a_char4): Likewise.
(read_decimal): Likewise.
(read_radix): Likewise.
(read_f): Likewise.
* io/transfer.c (read_sf): Use fbuf_read and mem_alloc_r, remove
usage of u.p.line_buffer.
(read_block_form): Update interface to return pointer, use
fbuf_read for direct access.
(read_block_direct): Update to new stream interface.
(write_block): Use mem_alloc_w for internal I/O.
(write_buf): Update to new stream interface.
(formatted_transfer_scalar): Don't use u.p.line_buffer, use
fbuf_seek for external files.
(us_read): Update to new stream interface.
(us_write): Likewise.
(data_transfer_init): Always check if we switch modes and flush.
(skip_record): Use new stream interface, fix comparison.
(next_record_r): Check for and reset u.p.at_eof, use new stream
interface, use fbuf_getc for spacing.
(write_us_marker): Update to new stream interface, don't inline.
(next_record_w_unf): Likewise.
(sset): New function.
(next_record_w): Use new stream interface, use fbuf for printing
newline.
(next_record): Use new stream interface.
(finalize_transfer): Remove sfree call, use new stream interface.
(st_iolength_done): Don't use u.p.scratch.
(st_read): Don't check for end of file.
(st_read_done): Don't use u.p.scratch, use unit_truncate.
(hit_eof): New function.
* io/unit.c (init_units): Always init fbuf for formatted units.
(update_position): Use new stream interface.
(unit_truncate): New function.
(finish_last_advance_record): Use fbuf to print newline.
* io/unix.c: Remove unused SSIZE_MAX macro.
(BUFFER_SIZE): Make static const variable rather than macro.
(struct unix_stream): Remove dirty_offset, len, method,
small_buffer. Order elements by decreasing size.
(struct int_stream): Remove.
(move_pos_offset): Remove usage of dirty_offset.
(reset_stream): Remove.
(do_read): Rename to raw_read, update to match new stream
interface.
(do_write): Rename to raw_write, update to new stream interface.
(raw_seek): New function.
(raw_tell): New function.
(raw_truncate): New function.
(raw_close): New function.
(raw_flush): New function.
(raw_init): New function.
(fd_alloc): Remove.
(fd_alloc_r_at): Remove.
(fd_alloc_w_at): Remove.
(fd_sfree): Remove.
(fd_seek): Remove.
(fd_truncate): Remove.
(fd_sset): Remove.
(fd_read): Remove.
(fd_write): Remove.
(fd_close): Remove.
(fd_open): Remove.
(fd_flush): Rename to buf_flush, update to new stream interface
and unix_stream.
(buf_read): New function.
(buf_write): New function.
(buf_seek): New function.
(buf_tell): New function.
(buf_truncate): New function.
(buf_close): New function.
(buf_init): New function.
(mem_alloc_r_at): Rename to mem_alloc_r, change prototype.
(mem_alloc_w_at): Rename to mem_alloc_w, change prototype.
(mem_read): Change to match new stream interface.
(mem_write): Likewise.
(mem_seek): Likewise.
(mem_tell): Likewise.
(mem_truncate): Likewise.
(mem_close): Likewise.
(mem_flush): New function.
(mem_sfree): Remove.
(empty_internal_buffer): Cast to correct type.
(open_internal): Use correct type, init function pointers.
(fd_to_stream): Test whether to open file as buffered or raw.
(output_stream): Remove mode set.
(error_stream): Likewise.
(flush_all_units_1): Use new stream interface.
(flush_all_units): Likewise.
(stream_at_bof): Remove.
(stream_at_eof): Remove.
(file_position): Remove.
(file_length): Update logic to use stream interface.
(flush): Remove.
(stream_offset): Remove.
* io/write.c (write_utf8_char4): Use int instead of size_t.
(write_x): Extra safety check.
(namelist_write_newline): Use new stream interface.
[[Split portion of a mixed commit.]]
From-SVN: r144993.2
2009-01-05 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/38735
* io/unit.c (get_internal_unit): Set default BLANK= status to NULL for
internal units.
From-SVN: r143102
2008-04-07 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/25829 28655
* io/open.c (edit_modes): Set flags.async. (new_unit) Set flags.async
and flags.status. (st_open): Initialize flags.async.
* io/list_read.c (read_charactor): Use delim_status instead of
flags.delim.
* io/read.c (read_x): Use pad_status instead of flags.pad.
* io/inquire.c (inquire_via_unit): Add new checks.
(inquire_via_filename): Likewise.
* io/io.h (st_parameter_inquire): Add new flags.
(st_parameter_dt): Likewise.
* io/unit.c (get_internal_unit): Set flags.async. (init_units): Set
flags.async.
* io/transfer.c: Add delim and pad option arrays. (read_sf): Use
pad_status instead of flags.pad. (read_block): Likewise.
(data_transfer_init): Set flags.async and add checks.
* io/write.c (write_character): Use delim_status.
(list_formatted_write_scalar): Likewise. (nml_write_obj): Likewise.
(namelist_write): Likewise.
From-SVN: r133988
2008-04-05 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/25829 28655
* gfortran.map: Add new symbol, _gfortran_st_wait.
* libgfortran.h (st_paramter_common): Add new I/O parameters.
* open.c (st_option decimal_opt[], st_option encoding_opt[],
st_option round_opt[], st_option sign_opt[], st_option async_opt[]): New
parameter option arrays. (edit_modes): Add checks for new parameters.
(new_unit): Likewise. (st_open): Likewise.
* list_read.c (CASE_SEPERATORS): Add ';' as a valid separator.
(eat_separator): Handle deimal comma. (read_logical): Fix whitespace.
(parse_real): Handle decimal comma. (read_real): Handle decimal comma.
* read.c (read_a): Use decimal status flag to allow comma in place of a
decimal point. (read_f): Allow comma as acceptable character in float.
According to decimal flag, substitute a period for a comma.
(read_x): If decimal status flag is comma, disable the read_comma flag,
not allowing comma as a delimiter, an extension otherwise.
* io.h: (unit_decimal, unit_encoding, unit_round, unit_sign,
unit_async): New enumerators. Add all new I/O parameters.
* unix.c (unix_stream, int_stream): Add io_mode asychronous I/O control.
(move_pos_offset, fd_alloc_w_at): Fix some whitespace.
(fd_sfree): Use new enumerator. (fd_read): Likewise.
(fd_write): Likewise. (fd_close): Fix whitespace.
(fd_open): Use new enumertors. (tempfile, regular_file,
open_external): Fix whitespace. (output_stream, error_stream): Set
method. (stream_offset): Fix whitespace.
* transfer.c: (st_option decimal_opt[], sign_opt[], blank_opt[]): New
option arrays. (formatted_transfer_scalar): Set sf_read_comma flag
based on new decimal_status flag. (data_transfer_init): Initialize new
parameters. Add checks for decimal, sign, and blank. (st_wait): New stub.
* format.c: (format_lex): Add format specifiers DP, DC, and D.
(parse_format_list): Parse the new specifiers.
* write.c (write_decimal): Use new sign enumerators to set the sign.
(write_complex): Handle decimal comma and semi-colon separator.
(nml_write_obj): Likewise.
* write_float.def: Revise sign enumerators. (calculate_sign): Use new
sign enumerators. (output_float): Likewise. Use new decimal_status flag
to set the decimal character to a point or a comma.
From-SVN: r133943
2008-02-10 Danny Smith <dannysmith@users.sourceforge.net>
PR gcc/35063
* gthr-win32.h (__gthread_mutex_destroy_function): New function
to CloseHandle after unlocking to prevent accumulation of handle
count.
2008-02-10 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/35063
* io/unit.c (destroy_unit_mutex): New function that uses
__gthread_mutex_destroy_function or pthread_mutex_destroy after
unlocking and before free_mem for final closure of I/O unit.
(delete_root): Use new function.
(free_internal_unit): Likewise.
(close_unit_1): Likewise.
From-SVN: r132217
2008-01-03 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/34565
* io/io.h: Adjust protoypes for open_internal(),
next_array_record() and init_loop_spec().
* io/list_read.c (next_char): Use argument "finished"
of next_array_record to check for end on internal file.
* io/unit.c: Calculate the offset for an array
internal file and supply this informatin to open_internal().
* io/unix.c (open_internal): Set the offset for the internal
file on open.
* io/transfer.c (init_loop_spec): Calculate the starting
record in case of negative strides. Return size of 0 for
an empty array.
(next_array_record): Use an extra flag to signal that the
array is finished.
(next_record_r): Use the new flag to next_array_record().
(next_record_w): Likewise.
2008-01-03 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/34565
* gfortran.dg/internal_readwrite_1.f90: New test.
* gfortran.dg/internal_readwrite_2.f90: New test.
From-SVN: r131305
2007-12-13 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/34370
PR libfortran/34323
PR libfortran/34405
* io/io.h: Add previous_nonadvancing_write to gfc_unit.
Add prototype for finish_last_advance_record.
* io/file_pos.c (st_backspace): Generate error if backspace is
attempted for direct access or unformatted stream.
If there are bytes left from a previous ADVANCE="no", write
them out before performing the backspace.
(st_endfile): Generate error if endfile is attempted for
direct access.
If there are bytes left from a previous ADVANCE="no", write
them out before performing the endfile.
(st_rewind): Generate error if rewind is attempted for
direct access.
* unit.c (close_unit_1): Move functionality to write
previously written bytes to...
(finish_last_advance_record): ... here.
* transfer.c (data_transfer_init): If reading, reset
previous_nonadvancing_write.
(finalize_transfer): Set the previous_noadvancing_write
flag if we are writing and ADVANCE="no" was specified.
Only call next_record() if advance="no" wasn't specified.
2007-12-13 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/34370
PR libfortran/34323
PR libfortran/34405
* gfortran.dg/advance_6.f90: New test case.
* gfortran.dg/direct_io_7.f90: New test case.
* gfortran.dg/streamio_13.f90: New test case.
From-SVN: r130912
2007-07-02 Steven G. Kargl <kargl@gcc.gnu.org>
Restore collateral damage from ISO C Binding merge.
2007-06-29 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/32456
* io/unit.c (filename_from_unit): Don't use find_unit, instead search
for unit directly.
From-SVN: r126238
