* configure.ac: Set have_compiler based on whether gcc directory
exists, rather than on whether gcc is in configdirs.
* configure: Rebuild.
From-SVN: r176800
PR bootstrap/49787
* configure.ac: Move --enable-bootstrap handling earlier in file.
If --enable-bootstrap and either --enable-build-with-cxx or
--enable-build-poststage1-with-cxx, enable C++ automatically.
* configure: Rebuild.
From-SVN: r176512
./: * configure.ac: Add --enable-build-poststage1-with-cxx. If set,
make C++ a boot_language. Set and substitute
POSTSTAGE1_CONFIGURE_FLAGS.
* Makefile.tpl (POSTSTAGE1_CONFIGURE_FLAGS): New variable.
(STAGE[+id+]_CONFIGURE_FLAGS): Add $(POSTSTAGE1_CONFIGURE_FLAGS).
* configure, Makefile.in: Rebuild.
gcc/:
* doc/install.texi (Configuration): Document
--enable-build-poststage1-with-cxx.
From-SVN: r176480
* configure.ac: Separate cases disabling target-libssp,
target-libiberty, target-libstdc++-v3 and Fortran from general
case over targets.
* configure: Regenerate.
From-SVN: r171827
2011-03-24 Paolo Bonzini <bonzini@gnu.org>
* configure.ac: Do not include mh-x86omitfp.
* configure: Regenerate.
config:
2011-03-24 Paolo Bonzini <bonzini@gnu.org>
* mh-x86omitfp: Remove.
From-SVN: r171421
2011-03-13 Jack Howarth <howarth@bromo.med.uc.edu>
PR lto/48086
* configure.ac: Disable LTO on darwin due to an assembler change in
Xcode 3.2.6/4.0 that limits the total number of sections/segments to
under 256.
* configure: Regenerate.
From-SVN: r170929
* config/cloog.m4 (CLOOG_REQUESTED): Use $2 if --without-cloog.
* configure.ac: If with_ppl is no, move setting with_cloog=no
after CLOOG_REQUESTED check.
* configure: Regenerated.
From-SVN: r169249
2011-01-25 Sebastian Pop <sebastian.pop@amd.com>
* configure.ac: Call AC_MSG_ERROR when PPL 0.11 is not present and
CLooG has been requested.
* configure: Regenerated.
From-SVN: r169215
2011-01-25 Sebastian Pop <sebastian.pop@amd.com>
toplev/
* configure: Regenerated.
* configure.ac: Check for version 0.11 (or later revision) of PPL.
toplev/gcc/
* doc/install.texi: Update the expected version number of PPL to 0.11.
* graphite-ppl.c (ppl_powerset_is_empty): Remove now dead code under
#if PPL_VERSION_MINOR < 11.
From-SVN: r169207
Now that gdb supports Blackfin targets, no need to mask it.
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
From-SVN: r168943
* configure.ac: Only disable a language library if no language needs
it. Don't let --disable-libgcj uncondtionally disable libffi.
* configure: Rebuild.
From-SVN: r166993
* configure.ac (*-*-darwin*): Use mh-darwin for all Darwin variants.
* configure: Regenerate.
* config/mh-ppc-darwin: Rename to mh-darwin.
gcc:
* gcc/configure.ac: Filter -mdynamic-no-pic from CFLAGS when testing for
plugin capabilities.
* gcc/configure: Regenerate.
gcc/testsuite:
* lib/plugin-support.exp (plugin-test-execute): Filter -mdynamic-no-pic from
plugin build flags on Darwin targets.
From-SVN: r166302
ChangeLog:
2010-11-03 Ian Lance Taylor <iant@google.com>
Dave Korn <dave.korn.cygwin@gmail.com>
PR lto/46273
* configure.ac: Remove libelf tests. Build lto-plugin on ELF always
and on other supported platforms whenever LTO is enabled.
* configure: Rebuild.
gcc/ChangeLog:
2010-11-03 Ian Lance Taylor <iant@google.com>
PR lto/46273
* gcc/config.gcc: Don't set lto_binary_reader.
* doc/install.texi (Prerequisites): Remove libelf paragraphs.
(Configuration): Mention --disable-lto. Remove --with-libelf
paragraph.
lto-plugin/ChangeLog:
2010-11-03 Dave Korn <dave.korn.cygwin@gmail.com>
PR lto/46273
* lto-plugin.h: Delete.
* lto-plugin-elf.c: Likewise.
* lto-plugin-coff.c: Likewise.
* configure.ac: Don't use libelf, don't source config.gcc.
(LIBELFLIBS): Delete.
(LIBELFINC): Delete.
(LTO_FORMAT): Delete.
(SYM_STYLE): Add AC_DEFINE var, set based on $target.
(config.h): Add AC_CONFIG_HEADERS directive.
* Makefile.am (LIBELFLIBS): Delete.
(LIBELFINC): Delete.
(LTO_FORMAT): Delete.
(DEFS): Import.
(AM_CPPFLAGS): Use it. Don't use LIBELFINC.
(liblto_plugin_la_SOURCES): Don't use LTO_FORMAT, don't include
any object-format-specific source file in the link.
(liblto_plugin_la_LIBADD): Don't use LIBELFLIBS.
* config.h.in: Generate.
* configure: Regenerate.
* Makefile.in: Likewise.
* lto-plugin.c (O_BINARY): Definition moved here from lto-plugin.h.
(LTO_SEGMENT_NAME): New definition.
(LTO_SECTION_PREFIX): Definition moved here from lto-plugin.h.
(LTO_SECTION_PREFIX_LEN): New definition.
(struct sym_aux): Struct definition moved here from lto-plugin.h.
(struct plugin_symtab): Likewise.
(struct plugin_objfile): Likewise.
(struct plugin_objfile): New struct def.
(enum symbol_style): New enum type.
(add_symbols): Make static.
(claimed_files): Likewise.
(num_claimed_files): Likewise.
(sym_style): New global.
(check): Make static.
(parse_table_entry): Likewise. Respect sym_style when extracting
symbol from symtab entry.
(translate): Make static.
(resolve_conflicts): Likewise.
(process_symtab): New function, per-section callback version of
old object-format-specific handling from deleted lto-plugin-elf.c.
(claim_file_handler): Convert ELF-specific version from deleted
lto-plugin-elf.c to simple_object interface and move here.
(process_options): Allow new '-sym-style=' option.
(onload): Don't call deleted onload_format_checks hook.
From-SVN: r166233
ChangeLog:
2010-10-07 Dave Korn <dave.korn.cygwin@gmail.com>
* configure.ac (build_lto_plugin): New shell variable.
(--enable-lto): Turn on by default for all non-ELF platforms that
have had LTO support added so far. Set build_lto_plugin appropriately
for both ELF and non-ELF.
(configdirs): Add lto-plugin or not based on build_lto_plugin.
* configure: Regenerate.
gcc/ChangeLog:
2010-10-07 Dave Korn <dave.korn.cygwin@gmail.com>
* config.host (host_lto_plugin_soname): New shell variable.
* configure.ac (LTOPLUGINSONAME): Add an AC_DEFINE for the above.
* config.in: Regenerate.
* configure: Regenerate.
* gcc.c (main): Use LTOPLUGINSONAME instead of hard-coding name of
LTO plugin shared library.
lto-plugin/ChangeLog:
2010-10-07 Dave Korn <dave.korn.cygwin@gmail.com>
* configure.ac: Source config.gcc to determine lto_binary_reader.
(LTO_FORMAT): New AC_SUBST variable inferred from lto_binary_reader.
* Makefile.am (LTO_FORMAT): Import.
(liblto_plugin_la_SOURCES): Add object format dependent module
defined by LTO_FORMAT.
(liblto_plugin_la_LIBADD): Allow for both PIC and non-PIC libiberty,
and work around libtool warning.
* configure: Regenerate.
* Makefile.in: Likewise.
* lto-plugin.c (struct sym_aux): Move to new lto-plugin.h.
(struct sym_aux): Likewise.
(struct plugin_symtab): Likewise.
(struct plugin_file_info): Likewise.
(LTO_SECTION_PREFIX): Likewise.
(add_symbols): Make non-static.
(claimed_files): Likewise.
(num_claimed_files): Likewise.
(check): Likewise.
(parse_table_entry): Likewise.
(translate): Likewise.
(resolve_conflicts): Likewise.
(process_symtab): Move to new lto-plugin-elf.c object format dependent
source file.
(claim_file_handler): Likewise, and make non-static.
(onload): Call new onload_format_checks function.
* lto-plugin.h: New file.
(LTO_SECTION_PREFIX): Move here.
(struct sym_aux): Likewise.
(struct plugin_symtab): Likewise.
(struct plugin_file_info): Likewise.
(claim_file_handler): Add new function prototype.
(onload_format_checks): Likewise.
(check): Declare extern.
(translate): Likewise.
(parse_table_entry): Likewise.
(resolve_conflicts): Likewise.
(add_symbols): Likewise.
(claimed_files): Likewise.
(num_claimed_files): Likewise.
* lto-plugin-elf.c (process_symtab): Move here.
(claim_file_handler): Likewise, and make non-static.
(onload_format_checks): New function factored out from onload.
* lto-plugin-coff.c (claim_file_handler): New function stub.
(onload_format_checks): Likewise.
From-SVN: r165133
* configure.ac: Support all v850 targets.
* configure: Regenerate.
* config/v850/lib1funcs.asm (save_r2_r31, return_r2_r31,
save_r20_r31, return_r20_r31, save_r21_r31, return_r21_r31,
save_r22_r31, return_r22_r31, save_r23_r31, return_r23_r31,
save_r24_r31, return_r24_r31, save_r25_r31, return_r25_r31,
save_r26_r31, return_r26_r31, save_r27_r31, return_r27_r31,
save_r28_r31, return_r28_r31, save_r29_r31, return_r29_r31,
save_r31, return_r31, save_interrupt, return_interrupt,
save_all_interrupt, return_all_interrupt, L_save_r2_r31,
L_return_interrupt, callt_return_interrupt, L_restore_all_interrupt,
L_save_##START##_r31c, L_callt_save_r31c: Updated as per the
new ABI requirements.
save_r6_r9, L_callt_save_r6_r9: Remove.
* config/v850/predicates.md (even_reg_operand, disp23_operand,
const_float_1_operand const_float_0_operand): New Predicates.
(pattern_is_ok_for_prepare, pattern_is_ok_for_prologue,
pattern_is_ok_for_epilogue): Update as per the ABI requirements.
* config/v850/t-v850: Update multilibs for new target variants.
(save_varargs, callt_save_varargs, callt_save_r6_r9): Remove.
* config/v850/t-v850e: Likewise.
* config/v850/v850.c (v850_issue_rate): New.
(v850_strict_argument_naming): New.
(function_arg): Modify to generate a different ABI.
(print_operand): Update case 'z' to support float modes.
(output_move_single): Modify to generate appropriate and better
assembly.
(v850_float_z_comparison_operator, v850_select_cc_mode,
v850_float_nz_comparison_operator, v850_gen_float_compare,
v850_gen_compare): New functions to support comparison of
float values.
(ep_memory_offset): Add support for V850E2 targets.
(INTERRUPT_FIXED_NUM, INTERRUPT_ALL_SAVE_NUM): Update.
(INTERRUPT_REGPARM_NUM): Remove.
(compute_register_save_size): Add extra case to save/restore
long call.
(use_prolog_function): New function to support prologue.
(expand_prologue): Add support for V850E2 targets and modified
as per the current ABI requirements.
(expand_epilogue): Likewise.
(construct_restore_jr): Modify based on TARGET_LONG_CALLS.
(construct_save_jarl): Likewise.
(construct_dispose_instruction): Update as per the current ABI
requirements.
(construct_prepare_instruction): Likewise.
* config/v850/v850.h(TARGET_CPU_DEFAULT): Add target predefines.
(TARGET_CPU_v850e2, TARGET_CPU_v850e2v3): Define
(CPP_SPEC): Updated to support v850e2 targets.
(STRICT_ALIGNMENT): Modified.
(FIRST_PSEUDO_REGISTER): Updated to add even registers.
(FIXED_REGISTERS): Likewise.
(CALL_USED_REGISTERS): Likewise.
(CONDITIONAL_REGISTER_USAGE): Updated.
(HARD_REGNO_MODE_OK): Updated.
(reg_class): Updated to add even registers.
(REG_CLASS_NAMES): Likewise.
(REG_CLASS_CONTENTS): Likewise.
(REGNO_REG_CLASS): Updated for CC registers.
(REG_CLASS_FROM_LETTER): Added support for even registers.
(REGNO_OK_FOR_BASE_P): Updated for CC registers.
(STACK_POINTER_REGNUM, FRAME_POINTER_REGNUM, LINK_POINTER_REGNUM,
ARG_POINTER_REGNUM): Updated.
(FUNCTION_ARG_ADVANCE): Define.
(REG_PARM_STACK_SPACE): Update as per the current ABI requirements.
(OUTGOING_REG_PARM_STACK_SPACE): Remove.
(EXTRA_CONSTRAINT): Add new constraint 'W' for 23-bit displacement.
(GO_IF_LEGITIMATE_ADDRESS): Updated.
(SELECT_CC_MODE): Define.
(REGISTER_NAMES): Updated to add psw and fcc registers.
(ADDITIONAL_REGISTER_NAMES): Updated.
(ASM_OUTPUT_ADDR_DIFF_ELT): Updated to support new targets.
(JUMP_TABLES_IN_TEXT_SECTION): Updated.
* config/v850/v850.md (define_constants): Define new constants.
(type): Update store,bit1,macc,div,fpu and single attributes.
(cpu): New attribute.
(cc): Add set_z attribute.
(unsign23byte_load, sign23byte_load, unsign23hword_load,
sign23hword_load, 23word_load, 23byte_store, 23hword_store,
23word_store): New instructions for 23-bit displacement load and
store.
(movqi_internal, movhi_internal): Update the attributes.
(movsi, movsi_internal_v850e): Updated to support v850e2 targets.
(movsi_internal_v850e, movsi_internal, movsf_internal): Update
the attributes.
(v850_tst1): Modified using CC_REGNUM.
(tstsi): Remove.
(cmpsi): Modified as define_expand from define_insn.
(cmpsi_insn, cmpsf, cmpdf): New instructions.
(addsi3, subsi3, negsi2, divmodsi4, udivmodsi4, divmodhi4,
udivmodhi4, v850_clr1_1, v850_clr1_2, v850_clr1_3, andsi3,
v850_set1_1, v850_set1_3, iorsi3, v850_not1_1, v850_not1_3, xorsi3,
one_cmplsi2): Clobber the CC_REGNUM register.
(v850_clr1_1, v850_clr1_2, v850_clr1_3, andsi3, v850_set1_1,
v850_set1_2, v850_set1_3, iorsi3, v850_not1_1, v850_not1_2,
v850_not1_3, xorsi3, one_cmplsi2): Update the attributes
accordingly.
(setf_insn, set_z_insn, set_nz_insn): New instructions for
v850e2v3 target.
(movsicc_normal_cc, movsicc_reversed_cc): New instructions.
(movsicc, movsicc_normal, movsicc_reversed): Add support for V850E2
targets.
(sasf_1, sasf_2): Remove.
(sasf): New instruction.
(rotlhi3, rotlhi3_8, rotlsi3, rotlsi3_16): Update to support V850E2
targets. CC_REGNUM register is clobbered and attributes are
updated.
(branch_z_normal, branch_z_invert, branch_nz_normal,
branch_nz_invert): New branch related instructions.
(jump): Updated the attributes.
(switch): Update to support new targets. CC_REGNUM register is
clobbered and attributes are updated.
(call_internal_short, call_internal_long, call_value_internal_short,
call_value_internal_long): Updated the attributes.
(zero_extendhisi2, zero_extendqisi2): CC_REGNUM register is
clobbered and attributes are updated.
(extendhisi_insn, extendhisi2, extendqisi_insn, extendqisi2):
Update to support new targets. CC_REGNUM register is clobbered.
(ashlsi3_v850e2, lshrsi3_v850e2, ashrsi3_v850e2): New shift
instructions.
(lshrsi3, ashrsi3): CC_REGNUM register is clobbered and attributes
are updated.
(ffssi2, addsf3, adddf3, subsf3, subdf3, mulsf3, muldf3, divsf3,
divdf3, minsf3, mindf3, maxsf3, maxdf3, abssf2, absdf2, negsf2,
negdf2, sqrtsf2, sqrtdf2, truncsfsi2, truncdfsi2, floatsisf2,
floatsidf2, extendsfdf2, extenddfsf2, recipsf2, recipdf2,
rsqrtsf2, rsqrtdf2, maddsf4, msubsf4, nmaddsf4, nmsubsf4,
cmpsf_le_insn, cmpsf_lt_insn, cmpsf_ge_insn, cmpsf_gt_insn,
cmpsf_eq_insn, cmpsf_ne_insn, cmpdf_le_insn, cmpdf_lt_insn,
cmpdf_ge_insn, cmpdf_gt_insn, cmpdf_eq_insn, cmpdf_ne_insn, trfsr,
movsfcc, movdfcc, movsfcc_z_insn, movsfcc_nz_insn, movdfcc_z_insn,
movdfcc_nz_insn, movedfcc_z_zero, movedfcc_nz_zero): New floating
point instructions defined for V850e2v3 target.
(callt_save_interrupt, callt_return_interrupt, return_interrupt):
Add support for V850E2 targets and CC_REGNUM register is clobbered.
(callt_save_all_interrupt, callt_restore_all_interrupt): Add
support for new targets.
* config/v850/v850-modes.def: New file.
* config/v850/v850.opt(mstrict-align): Remove.
(mno-strict-align, mjump-tables-in-data-section, mv850e2,
mv850e2v3): New command line options for V850.
* config.gcc: Update the newly added files.
* doc/invoke.texi: Update the newly added command line options for
V850 target.
From-SVN: r162530
Steven Bosscher <steven@gcc.gnu.org>
ChangeLog:
* configure.ac (--enable-lto): All *-apple-darwin* now support LTO.
* configure: Regenerate.
gcc/ChangeLog:
* config.gcc (powerpc-*-darwin*, powerpc64-*-darwin*): Add
lto-macho as lto_binary_reader.
* darwin.c (darwin_asm_named_section): Do not add assembler comment
after .section directive; just print it before the directive instead.
M gcc/config.gcc
M gcc/config/darwin.c
M ChangeLog
M gcc/ChangeLog
From-SVN: r159527
ChangeLog:
* configure.ac (--enable-lto): Add x86_64-apple-darwin* as
a platform that supports LTO.
* configure: Regenerate.
gcc/ChangeLog:
* config.gcc (i[34567]86-*-darwin*, x86_64-*-darwin*): Add
lto-macho as lto_binary_reader.
* target.h (struct gcc_target): New hooks lto_start and lto_end.
* target-def.h (TARGET_ASM_LTO_START, TARGET_ASM_LTO_END): Define.
* cgraphunit.c (ipa_passes): Wrap LTO assembler output generation
in lto_start and lto_end calls.
(is_elf_or_coff): Rename to maybe_lto_object_file. Add Mach-O
magic numbers.
(scan_prog_file): Update is_elf_or_coff call.
* doc/tm.text (TARGET_ASM_LTO_START, TARGET_ASM_LTO_END): Document.
* collect2.c (main): Fix enum comparison.
* config/darwin-protos.h (darwin_asm_lto_start, darwin_asm_lto_end):
Add prototypes.
* darwin9.h (LINK_COMMAND_SPEC): Pass -flto and -fwhopr to the linker.
* darwin.h (LINK_COMMAND_SPEC): Likewise. Define TARGET_ASM_LTO_START
and TARGET_ASM_LTO_END.
* darwin.c: Include obstack.h and lto-streamer.h.
(lto_section_names_offset, lto_section_names_obstack,
lto_asm_out_file, lto_asm_out_name, saved_asm_out_file): New static
global variables.
(LTO_SEGMENT_NAME, LTO_NAMES_SECTION): New defines.
(darwin_asm_lto_start): New function. Redirect output to asm_out_file
to a temporary file.
(darwin_asm_lto_end): New function. Restore asm_out_file.
(darwin_asm_named_section): For LTO sections, replace the name with
the offset of the section name in a string table, and build this
table.
(darwin_file_start): Initialize global vars for LTO support.
(darwin_file_end): If output to asm_out_file was redirected, append it
to the proper asm_out_file here. Add the section names section.
lto/ChangeLog:
* lto.h (struct lto_file_struct): Document offset member.
* lto-endian.h: New file.
* lto-macho.h: New file.
* lto-macho.c: New file.
* Make-lang.in: Add rule for lto-macho.o.
From-SVN: r159173
2010-05-05 Sebastian Pop <sebastian.pop@amd.com>
* configure.ac: Allow all the versions greater than 0.10 of PPL.
* configure: Regenerated.
From-SVN: r159134
* configure.ac (--enable-gold): Support both, both/gold and
both/bfd to add gold to configdirs without removing ld.
* configure: Regenerated.
* Makefile.def: Add install-gold dependency to install-ld.
* Makefile.in: Regenerated.
Co-Authored-By: H.J. Lu <hongjiu.lu@intel.com>
From-SVN: r158786
ChangeLog:
PR lto/42776
* configure.ac (--enable-lto): Refactor handling so libelf tests
are only performed inside then-clause of ACX_ELF_TARGET_IFELSE,
and allow LTO to be explicitly enabled on non-ELF platforms that
are known to support it inside else-clause.
* configure: Regenerate.
gcc/ChangeLog:
PR lto/42776
* configure.ac (gcc_cv_as_section_has_align): Set if installed
binutils supports extended .section directive needed by LTO, or
warn if older binutils found.
(LTO_BINARY_READER): New AC_SUBST'd variable.
(LTO_USE_LIBELF): Likewise.
* gcc/config.gcc (lto_binary_reader): New target-specific configure
variable.
* gcc/Makefile.in (LTO_BINARY_READER): Import AC_SUBST'd autoconf var.
(LTO_USE_LIBELF): Likewise.
* configure: Regenerate.
* collect2.c (is_elf): Rename from this ...
(is_elf_or_coff): ... to this, and recognize and allow i386 COFF
object files in addition to ELF-formatted ones.
(scan_prog_file): Caller updated. Also allow for LTO info marker
symbol to be prefixed or not by an extra underscore.
* config/i386/t-cygming (winnt.o): Also depend on LTO_STREAMER_H.
* config/i386/winnt.c: Also #include lto-streamer.h
(i386_pe_asm_named_section): Specify 1-byte section alignment for
LTO named sections.
(i386_pe_asm_output_aligned_decl_common): Add comment.
(i386_pe_maybe_record_exported_symbol): Allow decl arg to be NULL.
gcc/lto/ChangeLog:
PR lto/42776
* Make-lang.in (LTO_OBJS): Use LTO_BINARY_READER instead of
hardcoding 'lto-elf.o'.
($(LTO_EXE)): Use LTO_USE_LIBELF instead of hardcoding '-lelf'.
* lto-coff.h: New file.
* lto-coff.c: Likewise.
gcc/testsuite/ChangeLog:
PR lto/42776
* lib/lto.exp (lto_prune_vis_warns): New function.
(lto-link-and-maybe-run): Call it.
From-SVN: r158762
2010-04-02 Sebastian Pop <sebastian.pop@amd.com>
* configure.ac: Print "buggy but acceptable" when CLooG
revision is less than 9.
* configure: Regenerated.
From-SVN: r157945
PR 11238
* Makefile.tpl (local-distclean): Also remove config.cache files in
sub-directories as there may not be Makefiles present in the
sub-directories.
* Makefile.in: Regenerate.
* configure.ac: Revert previous delta.
* configure: Regenerate.
From-SVN: r156826
PR libstdc++/36101, PR libstdc++/42813
* configure.ac (bootstrap_target_libs): Make inclusion of
target-libgomp conditional on libgomb being in target_configdirs.
* configure: Regenerate.
From-SVN: r156218
2010-01-02 Richard Guenther <rguenther@suse.de>
PR lto/41529
* configure.ac: Include config/elf.m4. Disable LTO if not
builting for an elf target.
* configure: Regenerate.
config/
* elf.m4: New file.
From-SVN: r155565
2009-11-21 Sebastian Pop <sebpop@gmail.com>
* configure.ac: Check for version 0.15.5 or later revision of CLooG.
* configure: Regenerated.
From-SVN: r154635
./: * configure.ac: Change default of poststage1_ldflags to be empty if
poststage1_libs is set. When poststage1_libs is empty, and
ENABLE_BUILD_WITH_CXX is set, add -static-libgcc.
* configure: Rebuild.
gcc/:
* Makefile.in (HOST_LIBS): Move higher in file.
(LINKER, LINKER_FLAGS): If ENABLE_BUILD_WITH_CXX, but $(HOST_LIBS)
is not empty, set to $(CC) and $(CFLAGS).
From-SVN: r154422
* configure.ac: Add libelf to host_libs. Enable in-tree configury
of ppl and cloog. Fix in-tree configury of libelf, skip tests.
Fix portability of test of C++ as bootstrap language. Add
ppl/src/ppl-config.o to the bootstrap compare exclusion list.
* configure: Rebuild.
* Makefile.def: Drop host and target settings from gmp, mpfr, ppl,
and cloog. Fix in-tree ppl configuration. Introduce libelf
in-tree building.
* Makefile.tpl (POSTSTAGE1_CXX_EXPORT): New.
(POSTSTAGE1_HOST_EXPORTS): Use it.
(STAGE[+id+]_CXXFLAGS): New.
(BASE_FLAGS_TO_PASS): Pass it down.
(configure-stage[+id+]-[+prefix+][+module+]): Use it. Add
extra_exports.
(all-stage[+id+]-[+prefix+][+module+]): Likewise.
(configure-[+prefix+][+module+], all-[+prefix+][+module+]): Add
extra_exports.
* Makefile.in: Rebuild.
From-SVN: r154211
2009-10-30 Kai Tietz <kai.tietz@onevision.com>
* configure.ac: Disable target-winsup & co for
x86_64-*-mingw* and *-w64-mingw* targets.
* configure: Regenerated.
From-SVN: r153761
2009-10-22 Richard Guenther <rguenther@suse.de>
* configure.ac: Do not set LIBS for ppl/cloog checks. Disable
cloog if the ppl version check failed. Move flags saving
before setting in libelf check.
* configure: Regenerate.
From-SVN: r153447
2009-10-21 Richard Guenther <rguenther@suse.de>
* configure.ac: Adjust the ppl and cloog configure to work as
documented. Disable cloog if ppl was disabled. Omit the version
checks if they were disabled.
* configure: Re-generate.
From-SVN: r153055
/:
* configure.ac: Add 'lto' to enable_languages, not
new_enable_languages, and only if not already present.
* configure: Regenerate.
From-SVN: r152697
/:
* configure.ac: Do not use $extrasub for replacing @if/@endif
parts in Makefile; instead, use additional arguments to
AC_CONFIG_COMMANDS to do the replacement manually, with several
sed invocations, to avoid HP-UX sed command limits.
* configure: Regenerate.
From-SVN: r151525
ChangeLog:
* configure.ac (--with-build-config): New. Set BUILD_CONFIG.
Default to bootstrap-debug only if compare-debug works.
* configure: Rebuilt.
* Makefile.tpl: Make BUILD_CONFIG configure-configurable.
* Makefile.in: Rebuilt.
contrib/ChangeLog:
* bootstrap-debug-big.mk (STAGE2_CFLAGS): Drop -gtoggle.
* bootstrap-debug-lean.mk: Update comments.
(STAGE2_CFLAGS): Likewise.
(do-compare): Don't override.
gcc/ChangeLog:
* doc/invoke.texi (BUILD_CONFIG): Document --with-build-config.
(bootstrap-debug): Explain conditions in which it becomes default.
(bootstrap-debug-big): Rather than duplicate bootstrap-debug,
make it add to it.
From-SVN: r151367
/:
* configure.ac: Call AC_DISABLE_OPTION_CHECKING.
(baseargs): Add --disable-option-checking.
* configure: Regenerate.
config/:
* override.m4 (AC_DISABLE_OPTION_CHECKING): Define to be
empty if not defined, to avoid error with 2.59.
(_AC_LANG_IO_PROGRAM): When the Autoconf version is exactly
2.64, avoid per-language instances to drop fopen from test
program.
From-SVN: r150945
/:
Sync from src, merge:
2009-07-02 Tristan Gingold <gingold@adacore.com>
* configure.ac: Do not exclude gas for i386-*-darwin.
Add a case for x86_64-*-darwin.
* configure: Regenerate.
From-SVN: r150800
./: * configure.ac: Add --enable-build-with-cxx. When set, add c++ to
boot_languages. Only bootstrap target libraries listed in
target_libs for some boot language. Add --with-stage1-ldflags,
--with-stage1-libs, --with-boot-ldflags, --with-boot-libs. Remove
with_host_libstdcxx from ppllibs. Only add -fkeep-inline-functions
if not building with C++.
* Makefile.def: For target_module libstdc++-v3, set bootstrap=true.
* Makefile.tpl (STAGE1_LDFLAGS, STAGE1_LIBS): New variables.
(POSTSTAGE1_LDFLAGS, POSTSTAGE1_LIBS): New variables.
(HOST_EXPORTS): Add STAGE1_LDFLAGS to LDFLAGS. Export HOST_LIBS.
(POSTSTAGE1_HOST_EXPORTS): Set CXX and CXX_FOR_BUILD. Add
POSTSTAGE1_LDFLAGS to LDFLAGS. Export HOST_LIBS.
(POSTSTAGE1_FLAGS_TO_PASS): Likewise.
* configure, Makefile.in: Rebuild.
gcc/:
* configure.ac: Invoke AC_PROG_CXX. Separate C specific warnings
from loose_warn into c_loose_warn and from strict_warn into
c_strict_warn. Set and substitute warn_cxxflags. Check for
--enable-build-with-cxx. Set and substitute
ENABLE_BUILD_WITH_CXX. Set and substitute HOST_LIBS.
* Makefile.in (CXXFLAGS): New variable.
(C_LOOSE_WARN, C_STRICT_WARN): New variables.
(GCC_WARN_CFLAGS): Add $(C_LOOSE_WARN). Add $(C_STRICT_WARN) if
the default is the same as $(STRICT_WARN).
(GCC_WARN_CXXFLAGS, WARN_CXXFLAGS): New variables.
(CXX): New variable.
(COMPILER): New value if ENABLE_BUILD_WITH_CXX.
(COMPILER_FLAGS, LINKER, LINKER_FLAGS): Likewise.
(ALL_COMPILERFLAGS, ALL_LINKERFLAGS): Likewise.
(HOST_LIBS): New variable.
(GCC_CFLAGS): Add $(C_LOOSE_WARN).
(ALL_CXXFLAGS): New variable.
(LIBS, BACKENDLIBS): Add $(HOST_LIBS).
* doc/install.texi (Configuration): Document
--enable-build-with-cxx, --with-stage1-ldflags,
--with-stage1-libs, --with-boot-ldflags, --with-boot-libs.
* configure: Rebuild.
From-SVN: r148889
* configure.ac: Change copyright header to refer to version
3 of the GNU General Public License and to point readers at the
COPYING3 file and the FSF's license web page.
* Makefile.def: Likewise.
* Makefile.tpl: Likewise.
* Makefile.in: Regenerate.
From-SVN: r146023
2009-04-09 Jack Howarth <howarth@bromo.med.uc.edu>
* configure.ac: Restore match for darwin9 or later. Use double
brackets since regeneration eats one pair.
* configure: Regenerate.
From-SVN: r145860
2009-01-12 Sebastian Pop <sebastian.pop@amd.com>
PR tree-optimization/38515
* configure.ac (cloog-polylib): Removed.
(with_ppl, with_cloog): Test for "no".
* configure: Regenerated.
From-SVN: r143311
* configure.ac (mips*-*-*linux*, mips*-*-gnu*): Use mt-mips-gnu.
* configure: Regenerate.
config/
* mt-mips16-compat: New file, taken from mt-mips-elfoabi.
* mt-mips-elfoabi: Include mt-mips16-compat.
* mt-mips-gnu: New file.
gcc/
* config.gcc (mips*-*-linux*, mips64*-*-linux*): Add
mips/t-libgcc-mips16 to tmake_file.
* config/mips/mips-protos.h (mips_call_type): New enum.
(mips_pic_base_register, mips_got_load): Declare.
(mips_restore_gp): Take an rtx argument.
(mips_use_pic_fn_addr_reg_p): Declare.
(mips_expand_call): Replace the sibcall_p argument with
a mips_call_type argument. Add a lazy_p parameter.
(mips_split_call): Declare.
* config/mips/mips.h (MIPS16_PIC_TEMP_REGNUM): New macro.
(MIPS16_PIC_TEMP): Likewise.
(reg_class): Delete M16_NA_REGS.
(REG_CLASS_NAMES, REG_CLASS_CONTENTS): Update accordingly.
(SYMBOL_FLAG_BIND_NOW, SYMBOL_REF_BIND_NOW_P): New macros.
(mips_split_hi_p): Declare.
* config/mips/mips.c (mips_split_hi_p): New array.
(mips_regno_to_class): Change M16_NA_REGS entries to M16_REGS.
(mips_got_symbol_type_p): New function.
(mips_global_symbol_p): Check SYMBOL_REF_EXTERNAL_P.
(mips16_stub_function_p): New function.
(mips16_local_function_p): Likewise.
(mips_use_pic_fn_addr_reg_p): Likewise.
(mips_cannot_force_const_mem): Return false for HIGHs.
Extend CONST_INT and symbolic handling to MIPS16, using
mips_symbol_insns to check that the base symbol type is a
legitimate constant. Reject GOT-based constants if
TARGET_MIPS16_PCREL_LOADS.
(mips_const_insns): Check targetm.cannot_force_const_mem when
decomposing a symbolic base and a large offset.
(mips_emit_call_insn): Add ORIG_ADDR and ADDR parameters.
When calling a function that needs $25 from MIPS16 code,
move the target address into $25 separately and add a USE
to the call insn.
(mips16_gp_pseudo_reg): Insert the initializer immediately
before the first real insn.
(mips_pic_base_register, mips_got_load): New functions.
(mips_split_symbol): Generalize the name of the LO_SUM_OUT
parameter to LOW_OUT. Say that it can be any valid SET_SRC
when splitting a load-address operation. Split SYMBOL_GOT_DISP
constants and highs of SYMBOL_GOT_PAGE_OFST constants.
(mips_call_tls_get_addr): Update the call to mips_expand_call,
also passing NULL_RTX rather than const0_rtx as the aux argument.
(mips_rewrite_small_data_p): Check mips_lo_relocs and mips_split_p
instead of TARGET_EXPLICIT_RELOCS.
(mips_ok_for_lazy_binding_p): Check SYMBOL_REF_BIND_NOW_P.
(mips_load_call_address): Replace the sibcall_p argument with
a mips_call_type argument. Use mips_got_load.
(mips16_local_alias): New structure.
(mips16_local_aliases): New variable.
(mips16_local_aliases_hash): New function.
(mips16_local_aliases_eq): Likewise.
(mips16_local_alias): Likewise.
(mips16_stub_function): Likewise.
(mips16_build_function_stub): Create a local alias for the target
function. Handle TARGET_ABICALLS. For PIC abicalls, emit a
.cpload directive and an R_MIPS_NONE relocation for the target
function, then load the alias rather than the function itself.
Wrap the non-PIC abicalls version in ".option pic0/.option pic2".
(mips16_copy_fpr_return_value): Use mips16_stub_function and
mips_expand_call. Set SYMBOL_REF_BIND_NOW on the symbol.
(mips16_build_call_stub): Replace the FN parameter with an
FN_PTR parameter. Force the address into a register if it
isn't a call_insn_operand; don't rely on the caller to do this.
If a call to a locally-defined and locally-binding MIPS16
function must be made indirectly, redirect the call to the
function's local alias. Use mips16_stub_function_p,
mips16_stub_function, mips_expand_call and use_reg.
Set SYMBOL_FLAG_BIND_NOW on __mips_call_* symbols.
Use explicit %hi and %lo accesses where possible.
Use MIPS_CALL to generate the correct code form of a
jal instruction. Add clobbers of $18 instead of uses.
Update the call to mips_emit_call_insn.
(mips_expand_call): Replace the SIBCALL_P argument with a
mips_call_type argument and handle the new MIPS_CALL_EPILOGUE value.
Take a LAZY_P parameter. Call mips16_build_call_stub first,
allowing it to modify the call address. Update the calls to
mips_load_call_address and mips_emit_call_insn.
(mips_split_call): New function.
(mips_init_relocs): Clear mips_split_hi_p. Only use %gp_rel if
!TARGET_MIPS16. Split SYMBOL_GOT_DISP, and the high parts of
SYMBOL_GOT_PAGE_OFST, for MIPS16 code.
(mips_global_pointer): Check mips16_cfun_returns_in_fpr_p.
(mips_extra_live_on_entry): Include MIPS16_PIC_TEMP_REGNUM
if TARGET_MIPS16.
(mips_cprestore_slot): New function.
(mips_restore_gp): Take a TEMP parameter. Handle TARGET_MIPS16
and use mips_cprestore_slot.
(mips_output_function_prologue): Handle TARGET_MIPS16 for
LOADGP_OLDABI.
(mips_emit_loadgp): Move into MIPS16_PIC_TEMP for MIPS16,
then use a copygp_mips16 instruction to set up $28.
(mips_expand_prologue): Initialize the cprestore slot for MIPS16 too.
(mips16_lay_out_constants): Call split_all_insns_noflow.
(mips_reorg_process_insns): Explicitly set all_noreorder_p to
false if TARGET_MIPS16.
(mips_reorg): Don't call vr4130_align_insns if TARGET_MIPS16.
(mips_output_mi_thunk): Use mips_got_symbol_type_p. Use the
mips_dangerous_for_la25_p approach for MIPS16 PIC calls too.
(mips_set_mips16_mode): Always set MASK_EXPLICIT_RELOCS for
MIPS16 code. Allow MIPS16 o32 PIC.
(mips_override_options): Allow MIPS16 o32 PIC.
* config/mips/mips.md: Lower CONST_GP_P moves into register moves
after reload if TARGET_USE_GOT.
(UNSPEC_COPYGP): New constant.
(length): Use a default length of 8 for MIPS16 GOT loads.
(*got_disp<mode>): Check mips_split_p instead of TARGET_XGOT.
(*got_page<mode>): Check mips_split_hi_p.
(*got_disp<mode>, *got_page<mode>): Use mips_got_load.
(unspec_got<mode>, unspec_call<mode>): New expanders.
(load_got<mode>, load_call<mode>): Remove the length attributes.
Use a got attribute instead of a type attribute.
(copygp_mips16): New insn.
(restore_gp): Add a scratch clobber and pass it to mips_restore_gp.
(load_call<mode>): Use a "d" constraint instead of an "r" constraint.
(sibcall, sibcall_value, call, call_value): Update the calls
to mips_expand_call.
(call_internal, call_value_internal): Use mips_split_call.
(call_value_multiple_internal): Likewise.
(call_split): Move after call_internal (the insn it is split from).
(call_internal_direct, call_value_internal_direct): Turn into
define_insn_and_splits. Split if TARGET_SPLIT_CALLS.
(call_direct_split, call_value_direct_split): New patterns.
* config/mips/constraints.md (c): Handle TARGET_MIPS16 first
and use M16_REGS instead of M16_NA_REGS.
* config/mips/predicates.md (const_call_insn_operand): Replace
the TARGET_ABSOLUTE_ABICALLS-based check with a more general
mips_use_pic_fn_addr_reg_p check.
(move_operand): Reject HIGHs if mips_split_hi_p.
* config/mips/mips16.S: Assembly as empty if the ABI is not suitable.
(__mips16_floatunsisf): Inline __mips16_floatsisf.
(CALL_STUB_NO_RET, CALL_STUB_REG): Copy the target register to $25.
* config/mips/libgcc-mips16.ver: New file.
* config/mips/t-libgcc-mips16 (SHLIB_MAPFILES): Add
$(srcdir)/config/mips/libgcc-mips16.ver.
gcc/testsuite/
* lib/target-supports.exp (check_profiling_available): Return false
for -p and -pg on MIPS16 targets.
From-SVN: r138912
* configure.ac: Set TOPLEVEL_CONFIGURE_ARGUMENTS early, when
"$@" is still intact with both Autoconf 2.59 and 2.62.
* configure: Regenerate.
From-SVN: r136849
2008-06-12 David S. Miller <davem@davemloft.net>
David Edelsohn <edelsohn@gnu.org>
* configure.ac: Add powerpc*-*-* to gold supported targets.
* configure: Regenerate.
Co-Authored-By: David Edelsohn <edelsohn@gnu.org>
From-SVN: r136717
* configure.ac (arm*-*-linux-gnueabi): Don't disable building
of libobjc for ARM EABI Linux.
* configure: Regenerate.
libobjc/
* exception.c (__objc_exception_class): Initialise as constant
array for ARM EABI. Change macro to static const for non-ARM EABI.
(ObjcException): Add note about structure layout. Remove landingPad
and handlerSwitchValue for ARM EABI.
(get_ttype_entry): Add __ARM_EABI_UNWINDER__ version
of function.
(CONTINUE_UNWINDING): Define for ARM EABI/otherwise cases.
(PERSONALITY_FUNCTION): Use ARM EABI-specific arguments, and add
ARM EABI unwinding support.
(objc_exception_throw): Use memcpy to initialise exception class.
From-SVN: r136215
2008-04-18 Paolo Bonzini <bonzini@gnu.org>
Sync with src:
2008-04-14 David S. Miller <davem@davemloft.net>
* configure.ac: Add sparc*-*-* to gold supported targets.
* configure: Regenerate.
From-SVN: r134437
PR binutils/4334
* acx.m4 (ACX_CHECK_CYGWIN_CAT_WORKS): New macro to check that
cygwin builds are not running in textmode.
* configure.ac: Run ACX_XHEXK_CYGWIN_CAT_WORKS for cygwin hosted
builds.
* configure: Regenerate.
From-SVN: r133894
* configure.ac: Add support for --enable-gold.
* Makefile.def: Add gold as a directory like ld.
* configure, Makefile.in: Regenerate.
From-SVN: r133429
2008-02-20 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/32009
PR bootstrap/32161
* configure.ac (CFLAGS_FOR_TARGET, CXXFLAGS_FOR_TARGET): Compute here.
* configure: Regenerate.
* Makefile.def: Define stage_libcflags for all bootstrap stages.
* Makefile.tpl (STAGE1_LIBCFLAGS, STAGE2_LIBCFLAGS, STAGE3_LIBCFLAGS,
STAGE4_LIBCFLAGS): New.
(CFLAGS_FOR_TARGET, CXXFLAGS_FOR_TARGET): Subst from autoconf, without
$(SYSROOT_CFLAGS_FOR_TARGET) and $(DEBUG_PREFIX_CFLAGS_FOR_TARGET).
(BASE_TARGET_EXPORTS): Append them here to C{,XX}FLAGS.
(EXTRA_TARGET_FLAGS): Append them here to {LIB,}C{,XX}FLAGS.
(configure-stage[+id+]-[+prefix+][+module+]): Pass stage_libcflags
for target modules. Don't export LIBCFLAGS.
(all-stage[+id+]-[+prefix+][+module+]): Pass stage_libcflags; pass
$(BASE_FLAGS_TO_PASS) where [+args+] was passed, and [+args+] after
the overridden CFLAGS_FOR_TARGET and CXXFLAGS_FOR_TARGET.
(invocations of `all'): Replace $(TARGET_FLAGS_TO_PASS) with
$(EXTRA_TARGET_FLAGS), $(FLAGS_TO_PASS) with $(EXTRA_HOST_FLAGS).
* Makefile.in: Regenerate.
2008-02-20 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/32009
* mh-ppc-darwin (BOOT_CFLAGS): Reenable.
2008-02-20 Paolo Bonzini <bonzini@gnu.org>
* doc/install.texi: Correct references to CFLAGS, replacing them
with BOOT_CFLAGS. Document flags used during bootstrap for
target libraries.
From-SVN: r132479
* configure.ac (CFLAGS_FOR_BUILD, CXXFLAGS_FOR_BUILD, LDFLAGS_FOR_BUILD): Default them to host flags only
for $host = $build.
Set default CXXFLAGS_FOR_BUILD to CXXFLAGS, not CFLAGS.
Set default LDFLAGS_FOR_BUILD to LDFLAGS, not CFLAGS.
* configure: Regenerate.
From-SVN: r129122
