* config/mips/mips.h (CAN_ELIMINATE): Don't eliminate rap to $fp
(s8), but rather HARD_FRAME_POINTER_REGNUM. Add parentheses
where appropriate. Make the second reference to
leaf_function_p a function call, as intended. Reindented.
From-SVN: r50899
cp:
PR c++/4361
* cp-tree.h (CLASSTYPE_METHOD_VEC): Document where templated
conversion operators go.
(struct lang_decl_flags): Add template_conv_p and unused
bitfields.
(DECL_TEMPLATE_CONV_FN_P): New macro.
* call.c (build_user_type_conversion_1): Don't check second type
conversion of overload set first.
* class.c (add_method): Make sure templated conversion operators
all end up on slot 2.
* lex.c (do_identifier): A conversion operator token might be
satisfied by a templated conversion operator.
* mangle.c (struct globals) Add internal_mangling_p member.
(write_template_param): Do internal mangling, if needed.
(mangle_conv_op_name_for_type): Request internal mangling.
* pt.c (check_explicit_specialization): Use
CLASSTYPE_FIRST_CONVERSION_SLOT.
(template_parm_this_level_p): New function.
(push_template_decl_real): Determine DECL_TEMPLATE_CONV_FN_P.
* search.c (lookup_fn_fields_1): Template conversions will be on
the first slot.
* typeck.c (build_component_ref): Preserve the type of an
conversion operator name on the overload type.
(build_x_function_call): Retrieve the conversion operator name.
testsuite:
* g++.dg/template/conv1.C: New test.
* g++.dg/template/conv2.C: New test.
* g++.dg/template/conv3.C: New test.
* g++.dg/template/conv4.C: New test.
From-SVN: r50889
* config/m68hc11/m68hc11.c (m68hc11_override_options): Don't use
soft registers by default for 68HC12.
(m68hc11_conditional_register_usage): Don't use Z register for 68HC12
when compiling with -fomit-frame-pointer.
(expand_prologue): Use push/pop to allocate 4-bytes of locals on 68HC12.
(expand_epilogue): Likewise.
(m68hc11_gen_rotate): Use exg when rotating by 8.
From-SVN: r50882
* config/m68hc11/m68hc11-protos.h (ix_reg): Declare.
* config/m68hc11/m68hc11.md ("addsi3"): Use general_operand for sources.
(splits): Remove unused add splits.
("*addhi3_68hc12"): Tune constraints.
("addhi_sp"): Try to use X instead of Y in all cases and if the
constant fits in 8-bits and D is dead use abx/aby instructions.
("*addhi3"): Remove extern declaration of ix_reg.
("*subsi3"): Optimize and provide new split.
("subhi3"): Cleanup.
("*subhi3_sp"): Avoid saving X if we know it is dead.
(arith splits): For 68hc12 save the address register on the stack
and do the arithmetic operation with a pop.
From-SVN: r50880
2002-03-15 Chris Demetriou <cgd@broadcom.com>
* config/mips/mips.h (SUBTARGET_CPP_SIZE_SPEC): Provide an
MEABI case for each definition of SUBTARGET_CPP_SIZE_SPEC,
and define it so that regardless of target CPU size,
__SIZE_TYPE__ and __PTRDIFF_TYPE__ are defined in terms
of "int" rather than "long."
From-SVN: r50868
* ltmain.sh (taglist): Initialized. Don't let `CC' tag out of it.
(relink_command): Added --tag flags.
(mode=install): If relinking fails; error out.
From-SVN: r50855
* Makefile.am (jv_convert_LDADD): Don't list libraries that are
already implicitly brought in from libgcj.la.
(gij_LDADD, rmic_LDADD, rmiregistry_LDADD): Likewise.
* Makefile.in: Rebuilt.
From-SVN: r50853
* config/m68hc11/m68hc11.md ("tstqi_1"): Try to use ldab instead of tst.
("tstqi" split): Avoid using memory for tstqi on address register.
(splits): Remove constraints.
("cmphi_1_hc12"): New from "cmphi_1" and tuned for 68HC12.
("cmpdf", "cmpsf"): Remove since not used.
("*tbeq", "*tbne", "*tbeq8", "*tbne8"): Also look in cc_status.value2.
(peephole2): New peepholes to optimize tstqi and pre inc/dec addressing.
From-SVN: r50849
* config/m68hc11/m68hc11.c (m68hc11_symbolic_p): New function.
(m68hc11_indirect_p): New function.
(m68hc11_override_options): Must set MASK_NO_DIRECT_MODE for 68HC12.
(m68hc11_gen_highpart): Use TARGET_NO_DIRECT_MODE instead of
TARGET_M6812.
(asm_print_register): Likewise.
* config/m68hc11/m68hc11-protos.h (m68hc11_symbolic_p): Declare.
(m68hc11_indirect_p): Declare.
* config/m68hc11/m68hc11.h (EXTRA_CONSTRAINT): New constraint 'R', 'Q'.
(TARGET_NO_DIRECT_MODE, TARGET_RELAX): New.
(TARGET_SWITCHES): New option -mrelax.
* config/m68hc11/m68hc11.md ("andsi3"): Allow soft register for
destination.
("iorsi3", "xorsi3"): Likewise.
("andhi3", "andqi3", "iorhi3", "iorqi3"): Use a define_expand.
("*andhi3_mem"): New to handle destination in memory with bclr
and a scratch register.
("*andqi3_mem", "*iorhi3_mem", "*iorqi3_mem"): Likewise.
("*andhi3_const"): New when operand2 is constant.
("*andqi3_const", "*iorhi3_const", "*iorqi3_const"): Likewise.
("*andhi3_gen"): Cleanup of the old "andhi3".
("*andqi3_gen", "*iorhi3_gen", "*iorqi3_gen"): Likewise.
("xorqi3"): Update constraints.
From-SVN: r50843
* config/m68hc11/m68hc11.c (m68hc11_small_indexed_indirect_p): Look
for reg_equiv_memory_loc when the operand is a register that does
not get a hard register (stack location).
(tst_operand): After reload, accept all memory operand.
(symbolic_memory_operand): Fix detection of symbolic references.
* config/m68hc11/m68hc11.h (VALID_CONSTANT_OFFSET_P): For 68HC12
accept symbols and any constant.
From-SVN: r50839
* config/m68hc11/m68hc11.c (emit_move_after_reload): Add a REG_INC
note on the insn that sets the soft frame register.
(must_parenthesize): ix and iy are also reserved names.
(print_operand_address): One more place where parenthesis are required
to avoid confusion with register names.
(m68hc11_gen_movhi): Allow push of stack pointer.
(m68hc11_check_z_replacement): Fix handling of parallel with a
clobber.
(m68hc11_z_replacement): Must update the REG_INC notes to tell what
the replacement register is.
* config/m68hc11/m68hc11.h (REG_CLASS_CONTENTS): Switch Z_REGS
and D8_REGS classes.
(MODES_TIEABLE_P): All modes are tieable except QImode.
From-SVN: r50837
* config/m68hc11/m68hc11.c (m6812_cost): Make cost of add higher
than a shift to avoid adding a register with itself.
(m68hc11_memory_move_cost): Take into account NO_REGS.
(m68hc11_register_move_cost): Update and use memory move cost
for soft registers.
(m68hc11_address_cost): Make cost of valid offset not 0 so that
it gives more opportunities to cse to optimize.
* config/m68hc11/m68hc11.h (REGISTER_MOVE_COST): Pass the mode.
* config/m68hc11/m68hc11-protos.h (m68hc11_register_move_cost): Update.
From-SVN: r50833
2002-03-15 Eric Blake <ebb9@email.byu.edu>
For PR java/5902:
* libjava.compile/PR5902.java: Does not need to execute.
For PR java/5913:
* libjava.compile/PR5913.java: Ditto.
From-SVN: r50829
PR bootstrap/4128
* config/sparc/sparc.c (gen_v9_scc): Move early clobber test
before movrXX only, use reg_overlap_mentioned_p.
Only special case NE if just one insn can be generated.
* gcc.c-torture/compile/20020315-1.c: New test.
From-SVN: r50826
* varasm.c (assemble_variable): Call resolve_unique_section before
checking DECL_SECTION_NAME. Use zeros for a decl with DECL_INITIAL
of error_mark_node.
From-SVN: r50824
PR c++/5857
* decl.c (duplicate_decls): Use merge_types instead of common_type.
* typeck.c (common_type): Just hand off to
type_after_usual_arithmetic_conversions and
composite_pointer_type.
(merge_types): New fn.
(commonparms): Use it instead of common_type.
(type_after_usual_arithmetic_conversions): Also handle COMPLEX_TYPE.
(composite_pointer_type): Also handle attributes.
* cp-tree.h: Declare merge_types.
From-SVN: r50820
* testsuite/22_locale/collate_members_char.cc
(test01): compare the result of collate::compare with
that of collate::transform + string::compare, not with
that of collate::transform + collate::compare.
(test01): values returned by collate::compare are
normalized, therefore test against +-1.
* testsuite/22_locale/collate_members_wchar_t.cc: Ditto.
From-SVN: r50808
Alexandre Oliva
Bryce McKinlay
Bryce McKinlay
Nathan Sidwell
Neil Booth
Stephane Carrez
Jan Hubicka
GCC Administrator
Eric Christopher
Chris Demetriou
Richard Henderson
Mark Mitchell
Anthony Green
Eric Blake
Tom Tromey
Tom Tromey
Jakub Jelinek
Jason Merrill
Richard Earnshaw
Paolo Carlini
Jason Merrill