The DCache clean & ICache invalidation requirements for instructions
to be data coherence are discoverable through new fields in CTR_EL0.
Let's support the two bits if they are enabled, the CPU core will
not execute the unnecessary DCache clean or Icache Invalidation
instructions.
2019-09-25 Shaokun Zhang <zhangshaokun@hisilicon.com>
* config/aarch64/sync-cache.c (__aarch64_sync_cache_range): Add support for
CTR_EL0.IDC and CTR_EL0.DIC.
From-SVN: r276122
This is causing regressions when mixing with user code compiled in ARM mode.
2019-09-20 Christophe Lyon <christophe.lyon@st.com>
Revert:
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
* config/arm/unwind-arm.c (_Unwind_VRS_Set): Handle thumb-only
architecture.
From-SVN: r276001
This is the libgcc part of the interface -- providing the functions.
Rationale is provided at the top of libgcc/config/aarch64/lse.S.
* config/aarch64/lse-init.c: New file.
* config/aarch64/lse.S: New file.
* config/aarch64/t-lse: New file.
* config.host: Add t-lse to all aarch64 tuples.
From-SVN: r275967
Without this, when we are unwinding across a signal frame we can jump
to an even address which leads to an exception.
This is needed in __gnu_persnality_sigframe_fdpic() when restoring the
PC from the signal frame since the PC saved by the kernel has the LSB
bit set to zero.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
libgcc/
* config/arm/unwind-arm.c (_Unwind_VRS_Set): Handle thumb-only
architecture.
Co-Authored-By: Mickaël Guêné <mickael.guene@st.com>
From-SVN: r275575
The main difference with existing support is that function addresses
are function descriptor addresses instead. This means that all code
dealing with function pointers now has to cope with function
descriptors instead.
For the same reason, Linux kernel helpers can no longer be called by
dereferencing their address, so we implement wrappers that directly
call the kernel helpers.
When restoring a function address, we also have to restore the FDPIC
register value (r9).
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
gcc/
* ginclude/unwind-arm-common.h (unwinder_cache): Add reserved5
field.
libgcc/
* config/arm/linux-atomic.c (__kernel_cmpxchg): Add FDPIC support.
(__kernel_dmb): Likewise.
(__fdpic_cmpxchg): New function.
(__fdpic_dmb): New function.
* config/arm/unwind-arm.h (FDPIC_REGNUM): New define.
(gnu_Unwind_Find_got): New function.
(_Unwind_decode_typeinfo_ptr): Add FDPIC support.
* unwind-arm-common.inc (UCB_PR_GOT): New.
(funcdesc_t): New struct.
(get_eit_entry): Add FDPIC support.
(unwind_phase2): Likewise.
(unwind_phase2_forced): Likewise.
(__gnu_Unwind_RaiseException): Likewise.
(__gnu_Unwind_Resume): Likewise.
(__gnu_Unwind_Backtrace): Likewise.
* unwind-pe.h (read_encoded_value_with_base): Likewise.
libstdc++/
* libsupc++/eh_personality.cc (get_ttype_entry): Add FDPIC
support.
Co-Authored-By: Mickaël Guêné <mickael.guene@st.com>
From-SVN: r275568
In FDPIC, we need to make sure __do_global_dtors_aux and frame_dummy
are referenced by their address, not by pointers to the function
descriptors.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
libgcc/
* libgcc/crtstuff.c: Add support for FDPIC.
Co-Authored-By: Mickaël Guêné <mickael.guene@st.com>
From-SVN: r275567
The new arm-uclinuxfdpiceabi target behaves pretty much like
arm-linux-gnueabi. In order to enable the same set of features, we
have to update several configure scripts that generally match targets
like *-*-linux*: in most places, we add *-uclinux* where there is
already *-linux*, or uclinux* when there is already linux*.
In gcc/config.gcc and libgcc/config.host we use *-*-uclinuxfdpiceabi
because there is already a different behaviour for *-*uclinux* target.
In libtool.m4, we use uclinuxfdpiceabi in cases where ELF shared
libraries support is required, as uclinux does not guarantee that.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
config/
* futex.m4: Handle *-uclinux*.
* tls.m4 (GCC_CHECK_TLS): Likewise.
gcc/
* config.gcc: Handle *-*-uclinuxfdpiceabi.
libatomic/
* configure.tgt: Handle arm*-*-uclinux*.
* configure: Regenerate.
libgcc/
* config.host: Handle *-*-uclinuxfdpiceabi.
libitm/
* configure.tgt: Handle *-*-uclinux*.
* configure: Regenerate.
* libtool.m4: Handle uclinuxfdpiceabi.
From-SVN: r275564
This re-enables -msave-restore for shared libraries, and uses the
t-slibgcc-libgcc file to get the save-restore routines included directly
in shared libraries so that we don't need to indirect through the PLT
to reach them, which doesn't work.
gcc/
* config/riscv/riscv.c (riscv_option_override): Revert 2019-08-30
change.
libgcc/
* config.host (riscv*-*-linux*): Add t-slibgcc-libgcc to tmake_file.
(riscv*-*-freebsd*): Likewise.
From-SVN: r275478
gcc/ChangeLog:
* config.gcc (hppa*-*-netbsd*): New target.
* config/pa/pa-netbsd.h: New file.
* config/pa/pa32-netbsd.h: New file.
libgcc/ChangeLog:
* config.host (hppa*-*-netbsd*): New case.
* config/pa/t-netbsd: New file.
Co-Authored-By: Matthew Green <mrg@eterna.com.au>
Co-Authored-By: Maya Rashish <coypu@sdf.org>
Co-Authored-By: Nick Hudson <nick@nthcliff.demon.co.uk>
From-SVN: r273933
At present it is possible to call the CMSE functions for checking
addresses (such as cmse_check_address_range) and forget to check/use
the return value. This patch makes the interfaces more robust against
programmer error by marking these functions with the warn_unused_result
attribute. With this set, any use of these functions that does not use
the result will produce a warning.
This produces a warning on default warn levels when the result of the
cmse functions is not used.
For the following function:
void foo()
{
int *data;
cmse_check_address_range((int*)data, 0, 0);
}
The following warning is emitted:
warning: ignoring return value of 'cmse_check_address_range' declared
with attribute 'warn_unused_result' [-Wunused-result]
6 | cmse_check_address_range((int*)data, 0, 0);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gcc/ChangeLog:
2019-07-31 Joel Hutton <Joel.Hutton@arm.com>
* config/arm/arm_cmse.h (cmse_nonsecure_caller): Add
warn_unused_result attribute.
(cmse_check_address_range): Add warn_unused_result attribute.
libgcc/ChangeLog:
2019-07-31 Joel Hutton <Joel.Hutton@arm.com>
* config/arm/cmse.c (cmse_check_address_range): Add
warn_unused_result attribute.
2019-07-31 Joel Hutton <Joel.Hutton@arm.com>
* gcc.target/arm/cmse/cmse-17.c: New test.
From-SVN: r273924
2019-07-22 Martin Liska <mliska@suse.cz>
* config/avr/avr.c (avr_asm_output_aligned_decl_common): Update
comment.
* toplev.c (compile_file): Do not emit __gnu_lto_v1 symbol.
2019-07-22 Martin Liska <mliska@suse.cz>
* config/pa/stublib.c: Remove stub symbol __gnu_lto_v1.
* config/pa/t-stublib: Likewise.
2019-07-22 Martin Liska <mliska@suse.cz>
* simple-object-elf.c (simple_object_elf_copy_lto_debug_sections):
Do not search for gnu_lto_v1, but search for first '\0'.
From-SVN: r273662
Fixes bad assembly logic with software divide as reported by Richard Selvaggi.
Also, add a basic test to verify the soft math works when enabled.
gcc/testsuite/ChangeLog:
PR target/90362
* gcc.target/or1k/div-mul-3.c: New test.
libgcc/ChangeLog:
PR target/90362
* config/or1k/lib1funcs.S (__udivsi3): Change l.sfeqi
to l.sfeq and l.sfltsi to l.sflts equivalents as the immediate
instructions are not available on every processor. Change a
l.bnf to l.bf to fix logic issue.
From-SVN: r273648
t-darwin8 is nolonger needed (or present) for pre-10.4 powerpc, so remove
the reference.
2019-07-04 Iain Sandoe <iain@sandoe.co.uk>
* config.host: Remove reference to t-darwin8.
From-SVN: r273091
The library handling and some of the options for creating the crts for
the older PPC Darwin versions had bit-rotted somewhat. This adjusts the
build criteria for the crts to avoid newer ld64 versions warnings about
mismatches in build and object versions.
Added to some of the comments that it's documented why the specs are as
they are.
2019-07-03 Iain Sandoe <iain@sandoe.co.uk>
gcc/
* config/darwin.h (REAL_LIBGCC_SPEC): Adjust for earlier Darwin.
(STARTFILE_SPEC): Split crt3 into a separate spec.
(DARWIN_EXTRA_SPECS): Add crt2 and crt3 spec.
(DARWIN_CRT2_SPEC): New.
(DARWIN_CRT3_SPEC): New.
(MIN_LD64_OMIT_STUBS): Revise to 62.1.
* config/rs6000/darwin.h (DARWIN_CRT2_SPEC): Revise conditions.
(DARWIN_CRT3_SPEC): New.
libgcc/
2019-07-03 Iain Sandoe <iain@sandoe.co.uk>
* config.host (powerpc-*-darwin*,powerpc64-*-darwin*): Revise crt
list.
* config/rs6000/t-darwin: Build crt3_2 for older systems. Revise
mmacosx-version-min for crts to run across all system versions.
* config/rs6000/t-darwin64 (LIB2ADD): Remove.
* config/t-darwin: Revise mmacosx-version-min for crts to run across
system versions >= 10.4.
From-SVN: r273016
2019-07-03 Martin Liska <mliska@suse.cz>
* gcc.dg/tree-prof/val-prof-2.c: Update scanned pattern
as we do now better.
2019-07-03 Martin Liska <mliska@suse.cz>
* libgcov-merge.c (merge_single_value_set): Support N values.
* libgcov-profiler.c (__gcov_one_value_profiler_body): Likewise.
From-SVN: r273004
From the last commit.
2019-06-25 Iain Sandoe <iain@sandoe.co.uk>
* config.host: Add libef_ppc.a to the extra files for powerpc-darwin.
From-SVN: r272660
We have been including this in libgcc, which means that we have to append
-lgcc even when using shared libgcc. In preparation for revision of libgcc
split this into an endfile.
gcc/
2019-06-25 Iain Sandoe <iain@sandoe.co.uk>
* config/rs6000/darwin.h (ENDFILE_SPEC): New.
libgcc/
2019-06-25 Iain Sandoe <iain@sandoe.co.uk>
* config.host: Add libef_ppc.a to the extra files for powerpc-darwin.
* config/rs6000/t-darwin: (PPC_ENDFILE_SRC, PPC_ENDFILE_OBJS): New.
Build objects for the out of line save/restore register functions
so that they can be used for any supported Darwin version.
* config/t-darwin: Default the build Darwin version to Darwin8
(MacOS 10.4).
From-SVN: r272659
2019-06-25 Martin Liska <mliska@suse.cz>
* libgcov-driver-system.c (replace_filename_variables): Do not
call strlen with NULL argument.
From-SVN: r272650
Atm we see:
...
libgcc/config/nvptx/crt0.c:36:1: warning: no previous prototype for \
‘__main’ [-Wmissing-prototypes]
...
Fix this by adding the prototype.
Build and reg-tested on nvptx.
Build and reg-tested on x86_64 with nvptx accelerator.
2019-06-18 Tom de Vries <tdevries@suse.de>
* config/nvptx/crt0.c (__main): Declare.
From-SVN: r272412
gcc/ChangeLog:
2019-06-16 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/msp430/msp430.c (msp430_expand_helper): Setup arguments which
describe how to perform MSPABI compliant 64-bit shift.
* config/msp430/msp430.md (ashldi3): New define_expand.
(ashrdi3): New define_expand.
(lshrdi3): New define_expand.
libgcc/ChangeLog:
2019-06-16 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/msp430/slli.S (__mspabi_sllll): New library function for
performing a logical left shift of a 64-bit value.
* config/msp430/srai.S (__mspabi_srall): New library function for
performing a arithmetic right shift of a 64-bit value.
* config/msp430/srll.S (__mspabi_srlll): New library function for
performing a logical right shift of a 64-bit value.
gcc/testsuite/ChangeLog:
2019-06-16 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* gcc.target/msp430/mspabi_sllll.c: New test.
* gcc.target/msp430/mspabi_srall.c: New test.
* gcc.target/msp430/mspabi_srlll.c: New test.
* gcc.c-torture/execute/shiftdi-2.c: New test.
From-SVN: r272360
This is a roll-up of a set of changes needed to support the Arm EABI on NetBSD.
2019-06-14 Matt Thomas <matt@3am-software.com>
Matthew Green <mrg@eterna.com.au>
Nick Hudson <skrll@netbsd.org>
Maya Rashish <coypu@sdf.org>
Richard Earnshaw <rearnsha@arm.com>
gcc:
* config.gcc (arm*-*-netbsdelf*) Add support for EABI configuration.
* config.host (arm*-*-netbsd*): Use driver-arm.o on native NetBSD.
* config/arm/netbsd-eabi.h: New file.
* config/arm/netbsd-elf.h (TARGET_OS_CPP_BUILTINS): Undefine before
redefining.
(SUBTARGET_EXTRA_ASM_SPEC): Don't pass -matpcs to the assembler.
* config/netbsd-elf.h (NETBSD_LINK_LD_ELF_SO_SPEC): New define.
(NETBSD_SUBTARGET_EXTRA_SPECS): New define.
(SUBTARGET_EXTRA_SPECS): Define to NETBSD_SUBTARGET_EXTRA_SPECS.
libatomic:
* configure.tgt (arm*): Handle NetBSD in the same way as FreeBSD.
libgcc:
* config.host (arm*-*-netbsdelf*): Add support for EABI configurations.
* config/arm/t-netbsd (LIB1ASMFUNCS): Add some additional assembler
functions to build.
* config/arm/t-netbsd-eabi: New file.
Co-Authored-By: Matthew Green <mrg@eterna.com.au>
Co-Authored-By: Maya Rashish <coypu@sdf.org>
Co-Authored-By: Nick Hudson <skrll@netbsd.org>
Co-Authored-By: Richard Earnshaw <rearnsha@arm.com>
From-SVN: r272290
libgcc/ChangeLog:
2019-06-12 Dimitar Dimitrov <dimitar@dinux.eu>
* config.host: Add PRU target.
* config/pru/asri.c: New file.
* config/pru/eqd.c: New file.
* config/pru/eqf.c: New file.
* config/pru/ged.c: New file.
* config/pru/gef.c: New file.
* config/pru/gtd.c: New file.
* config/pru/gtf.c: New file.
* config/pru/led.c: New file.
* config/pru/lef.c: New file.
* config/pru/lib2bitcountHI.c: New file.
* config/pru/lib2divHI.c: New file.
* config/pru/lib2divQI.c: New file.
* config/pru/lib2divSI.c: New file.
* config/pru/libgcc-eabi.ver: New file.
* config/pru/ltd.c: New file.
* config/pru/ltf.c: New file.
* config/pru/mpyll.S: New file.
* config/pru/pru-abi.h: New file.
* config/pru/pru-asm.h: New file.
* config/pru/pru-divmod.h: New file.
* config/pru/sfp-machine.h: New file.
* config/pru/t-pru: New file.
From-SVN: r272204
When libgcc is built on Darwin, it is usually built for the earliest potential
target (Darwin8, 10.4). Build for that revision default to assuming that the
processor might be G3 (without vector ops) and there is an outlined function
used for save/restore that checks whether the processor is G3 or G4+ at run-
time. However, the unwinder itself needs to be built with the assumption of
vector usage so that the relevant outlined functions are called.
2019-06-06 Iain Sandoe <iain@sandoe.co.uk>
* config/rs6000/t-darwin: Ensure that the unwinder is built with
altivec enabled.
From-SVN: r272017
* config/ia64/crtbegin.S (__dso_handle): Put in .sdata/.sbss
rather than .data/.bss so it can be accessed via gp-relative
addressing.
From-SVN: r271977
* config.gcc (rx-*-linux*): New target.
* config/rx/elf.opt: New file.
* config/rx/linux.h: Likewise.
* config/rx/t-linux: Likewise.
* config/rx/rx.c (TARGET_SAVE_ACC_REGISTER): If not defined,
make it zero.
* config/rx/rx.h (ASM_APP_ON): Allow to be overridden.
(ASM_APP_OFF): Likewise.
* config/rx/rx.opt: Drop -msim and -mas100-syntax, they were
moved elsewhere.
* config.host (rx-*-linux*): Add new case.
* config/rx/t-rx (HOST_LIBGCC2_CFLAGS): Force DFmode to SFmode.
From-SVN: r271748
