This sets DF_RD_PRUNE_DEAD_DEFS like all other uses of the UD/DU
chain problems which makes the RD problem consume a lot less memory.
2021-02-01 Richard Biener <rguenther@suse.de>
PR rtl-optimization/98863
* config/i386/i386-features.c (convert_scalars_to_vector):
Set DF_RD_PRUNE_DEAD_DEFS.
BE ilp32 Linux generates extra stack stwu instructions which shouldn't
be counted in, \m … \M is needed around each instruction, not just the
beginning and end of the entire pattern.
gcc/testsuite/ChangeLog:
2021-02-01 Xionghu Luo <luoxhu@linux.ibm.com>
* gcc.target/powerpc/pr79251.p8.c: Update store count regex.
* gcc.target/powerpc/pr79251.p9.c: Likewise.
If the stdint.h system file follows the ISO C99 specification, it might
not define SIZE_MAX in C++ by default, so provide a local fallback.
gcc/
* system.h (SIZE_MAX): Define if not already defined.
A number of ELF-specific tests were introduced in r11-6140, one
of which fails on all Mach-O/Darwin platforms.
On examination, the tests have no meaningful parallel for Mach-O
which dead strips at the symbol level, and does not make use of
function sections (the fact that a used and an unused symbol are
placed in the same section will not affect dead stripping).
Given that the tests do not demonstrate anything useful on Darwin,
skip them.
gcc/testsuite/ChangeLog:
* c-c++-common/attr-used-5.c: Skip for Darwin.
* c-c++-common/attr-used-6.c: Likewise.
* c-c++-common/attr-used-7.c: Likewise.
* c-c++-common/attr-used-8.c: Likewise.
* c-c++-common/attr-used-9.c: Likewise.
With the recent changes to vector insert optimization, the number of
expected stores for the two testcases has changed.
gcc/testsuite/ChangeLog:
* gcc.target/powerpc/pr79251.p8.c: Update ilp32 store counts.
* gcc.target/powerpc/pr79251.p9.c: Same.
This patch adds a new function to genfusion.pl to generate patterns for
logical-logical fusion. They are enabled by default for power10 and can
be disabled by -mno-power10-fusion-2logical or -mno-power10-fusion.
gcc/ChangeLog
* config/rs6000/genfusion.pl (gen_2logical): New function to
generate patterns for logical-logical fusion.
* config/rs6000/fusion.md: Regenerated patterns.
* config/rs6000/rs6000-cpus.def: Add
OPTION_MASK_P10_FUSION_2LOGICAL.
* config/rs6000/rs6000.c (rs6000_option_override_internal):
Enable logical-logical fusion for p10.
* config/rs6000/rs6000.opt: Add -mpower10-fusion-2logical.
AIX only permits use of Altivec VSRs 20-31 in a Vector Extended ABI mode.
This patch explicitly enables use of the VSRs using the new -mabi=vec-extabi
command line option also implemented in LLVM for AIX.
Bootstrapped on powerpc-ibm-aix7.2.3.0 and powerpc64le-linux-gnu.
gcc/ChangeLog:
* config/rs6000/rs6000.opt (mabi=vec-extabi): New.
(mabi=vec-default): New.
* config/rs6000/rs6000-c.c (rs6000_target_modify_macros): Define
__EXTABI__ for AIX Vector extended ABI.
* config/rs6000/rs6000.c (rs6000_debug_reg_global): Print AIX Vector
extabi info.
(conditional_register_usage): If AIX vec_extabi enabled, vs20-vs31
are non-volatile.
* doc/invoke.texi (PowerPC mabi): Add AIX vec-extabi and vec-default.
> rtl-optimization/98863 - tame i386 specific RPAD pass
>
> caused
>
> FAIL: gcc.c-torture/compile/20051216-1.c -O1 (internal compiler error)
> FAIL: gcc.c-torture/compile/20051216-1.c -O1 (test for excess errors)
The problem is that we don't revert the df flags back.
This patch fixes it by clearing DF_DEFER_INSN_RESCAN after
calling df_process_deferred_rescans, so that it doesn't leak into following
unprepared passes that expect non-deferred rescans.
2021-01-30 Jakub Jelinek <jakub@redhat.com>
* config/i386/i386-features.c (remove_partial_avx_dependency): Clear
DF_DEFER_INSN_RESCAN after calling df_process_deferred_rescans.
* gcc.target/i386/20051216-1.c: New test.
The test (intentionally) is not gcc.dg/vect/, as it needs -fopenmp and uses
OpenMP directives other than simd and therefore can't rely on default
VECTFLAGS and so I think can't safely use vect_int effective target
either. So, I'm just making sure it is vectorized on x86 and on aarch64 (the
latter as an example of a target that doesn't need any extra options to get
the vectorization).
2021-01-30 Jakub Jelinek <jakub@redhat.com>
PR testsuite/98243
* gcc.dg/gomp/simd-2.c: Add -msse2 on x86. Restrict
scan-tree-dump-times to x86 and aarch64 targets.
* gcc.dg/gomp/simd-3.c: Likewise.
This test started failing when I changed the mapping of IEEE 128-bit long
double built-in functions on 2021-01-28. This patch fixes the test so it
uses the correct name.
gcc/testsuite/
2021-01-29 Michael Meissner <meissner@linux.ibm.com>
PR testsuite/98870
* gcc.target/powerpc/ppc-fortran/ieee128-math.f90: Fix the
expected result.
Reload pseudos of ALL_REGS class did not narrow class from constraint
in insn (set (pseudo) (lo_sum ...)) because lo_sum is considered an
object (OBJECT_P) although the insn is not a classic move. To permit
narrowing we are starting to use MEM_P and REG_P instead of OBJECT_P.
gcc/ChangeLog:
PR target/97701
* lra-constraints.c (in_class_p): Don't narrow class only for REG
or MEM.
gcc/testsuite/ChangeLog:
PR target/97701
* gcc.target/aarch64/pr97701.c: New.
Hi,
Per PR91903, GCC ICEs when we attempt to pass a variable
(or out of range value) into the vec_ctf() builtin. Per
investigation, the parameter checking exists for this
builtin with the int types, but was missing for
the long long types. This problem also occurs for the
vec_cts() builtin, which is also fixed by this patch.
This patch adds the missing CODE_FOR_* entries to the
rs6000_expand_binup_builtin to cover that scenario.
This patch also updates some existing tests to remove
calls to vec_ctf() and vec_cts() that contain negative
values.
PR target/91903
2020-01-29 Will Schmidt <will_schmidt@vnet.ibm.com>
gcc/ChangeLog:
* config/rs6000/rs6000-call.c (rs6000_expand_binup_builtin): Add
clauses for CODE_FOR_vsx_xvcvuxddp_scale and
CODE_FOR_vsx_xvcvsxddp_scale to the parameter checking code.
gcc/testsuite/ChangeLog:
* gcc.target/powerpc/pr91903.c: New test.
* gcc.target/powerpc/builtins-1.fold.h: Update.
* gcc.target/powerpc/builtins-2.c: Update.
A couple of module invariants are that the modules are always
allocated in ascending order and appended to the module array. The
entity array is likewise ordered, with each module having spans in
that array in ascending order. Prior to header-units, this was
provided by the way import declarations were encountered. With
header-units we need to load the preprocessor state of header units
before we parse the C++, and this can lead to incorrect ordering of
the entity array. I had made the initialization of a module's
language state a little too lazy. This moves the allocation of entity
array spans into the initial read of a module, thus ensuring the
ordering of those spans. We won't be looking in them until we've
loaded the language portions of that particular module, and even if we
did, we'd find NULLs there and issue a diagnostic.
PR c++/98843
gcc/cp/
* module.cc (module_state_config): Add num_entities field.
(module_state::read_entities): The entity_ary span is
already allocated.
(module_state::write_config): Write num_entities.
(module_state::read_config): Read num_entities.
(module_state::write): Set config's num_entities.
(module_state::read_initial): Allocate the entity ary
span here.
(module_state::read_language): Do not set entity_lwm
here.
gcc/testsuite/
* g++.dg/modules/pr98843_a.C: New.
* g++.dg/modules/pr98843_b.H: New.
* g++.dg/modules/pr98843_c.C: New.
Don't track [1, +INF] for pointer types, treat them as invariant for caching
purposes as they cannot be further refined without evaluating to UNDEFINED.
PR tree-optimization/98866
* gimple-range-gori.h (gori_compute:set_range_invariant): New.
* gimple-range-gori.cc (gori_map::set_range_invariant): New.
(gori_map::m_maybe_invariant): Rename from all_outgoing.
(gori_map::gori_map): Rename all_outgoing to m_maybe_invariant.
(gori_map::is_export_p): Ditto.
(gori_map::calculate_gori): Ditto.
(gori_compute::set_range_invariant): New.
* gimple-range.cc (gimple_ranger::range_of_stmt): Set range
invariant for pointers evaluating to [1, +INF].
This removes analyzing DF with expensive problems which we do not
use at all and which somehow cause 5GB of memory to leak. Instead
just do a defered rescan of added insns.
2021-01-29 Richard Biener <rguenther@suse.de>
PR rtl-optimization/98863
* config/i386/i386-features.c (remove_partial_avx_dependency):
Do not perform DF analysis.
(pass_data_remove_partial_avx_dependency): Remove
TODO_df_finish.
This patch reimplements the vabdl_high intrinsics using builtins.
It slightly cleans up the RTL pattern (the mode iterators) but nothing
interesting apart from that.
gcc/ChangeLog:
* config/aarch64/aarch64-simd-builtins.def (sabdl2, uabdl2):
Define builtins.
* config/aarch64/aarch64-simd.md (aarch64_<sur>abdl2<mode>_3):
Rename to...
(aarch64_<sur>abdl2<mode>): ... This.
(<sur>sadv16qi): Adjust use of above.
* config/aarch64/arm_neon.h (vabdl_high_s8): Reimplement using
builtin.
(vabdl_high_s16): Likewise.
(vabdl_high_s32): Likewise.
(vabdl_high_u8): Likewise.
(vabdl_high_u16): Likewise.
(vabdl_high_u32): Likewise.
This patch reimplements the vabal intrinsics with builtins.
The RTL pattern is cleaned up to emit the right .8b suffixes for the
inputs (though .16b is also accepted)
and iterate over the right modes. The pattern's only other use is
through the sadv16qi expander, which is adjusted.
I've verified that the codegen for sadv16qi is not worse off.
gcc/ChangeLog:
* config/aarch64/aarch64-simd-builtins.def (sabal): Define
builtin.
(uabal): Likewise.
* config/aarch64/aarch64-simd.md (aarch64_<sur>abal<mode>_4):
Rename to...
(aarch64_<sur>abal<mode>): ... This
(<sur>sadv16qi): Adust use of the above.
* config/aarch64/arm_neon.h (vabal_s8): Reimplement using
builtin.
(vabal_s16): Likewise.
(vabal_s32): Likewise.
(vabal_u8): Likewise.
(vabal_u16): Likewise.
(vabal_u32): Likewise.
This patch reimplements the vaddlv* intrinsics using builtins.
The vaddlv_s32 and vaddlv_u32 intrinsics actually perform a pairwise
SADDLP/UADDLP instead of a SADDLV/UADDLV but because they only use
two elements it has the same semantics.
gcc/ChangeLog:
* config/aarch64/aarch64-simd-builtins.def (saddlv, uaddlv):
Define builtins.
* config/aarch64/aarch64-simd.md (aarch64_<su>addlv<mode>):
Define.
* config/aarch64/arm_neon.h (vaddlv_s8): Reimplement using
builtin.
(vaddlv_s16): Likewise.
(vaddlv_u8): Likewise.
(vaddlv_u16): Likewise.
(vaddlvq_s8): Likewise.
(vaddlvq_s16): Likewise.
(vaddlvq_s32): Likewise.
(vaddlvq_u8): Likewise.
(vaddlvq_u16): Likewise.
(vaddlvq_u32): Likewise.
(vaddlv_s32): Likewise.
(vaddlv_u32): Likewise.
* config/aarch64/iterators.md (VDQV_L): New mode iterator.
(unspec): Add UNSPEC_SADDLV, UNSPEC_UADDLV.
(Vwstype): New mode attribute.
(Vwsuf): Likewise.
(VWIDE_S): Likewise.
(USADDLV): New int iterator.
(su): Handle UNSPEC_SADDLV, UNSPEC_UADDLV.
gcc/testsuite/ChangeLog:
* gcc.target/aarch64/simd/vaddlv_1.c: New test.
This changes it from bytes to kB since its value is limited to
2147483648.
2021-01-29 Richard Biener <rguenther@suse.de>
* doc/invoke.texi (--param max-gcse-memory): Document unit
of size.
* gcse.c (gcse_or_cprop_is_too_expensive): Adjust.
* params.opt (--param max-gcse-memory): Adjust default and
document unit of size.
This fixes overflow of the memory usage estimate in turn failing
to disable itself on WRF with LTO, causing a few GBs worth of
memory peak.
2021-01-29 Richard Biener <rguenther@suse.de>
PR rtl-optimization/98863
* gcse.c (gcse_or_cprop_is_too_expensive): Use unsigned
HOST_WIDE_INT for the memory estimate.
This avoids computing niters information for fake edges.
2021-01-29 Bin Cheng <bin.cheng@linux.alibaba.com>
Richard Biener <rguenther@suse.de>
PR tree-optimization/97627
* tree-ssa-loop-niter.c (number_of_iterations_exit_assumptions):
Do not analyze fake edges.
* g++.dg/pr97627.C: New testcase.
This changes the REE dataflow to change the explicit all-ones
starting solution to be implicit via a visited flag, removing
the need to initially start with fully populated bitmaps for
all basic-blocks. That reduces peak memory use when compiling
the RTL checking enabled insn-extract.c testcase from PR98144
from 6GB to less than 2GB.
2021-01-29 Richard Biener <rguenther@suse.de>
PR rtl-optimization/98144
* df.h (df_mir_bb_info): Add con_visited member.
* df-problems.c (df_mir_alloc): Initialize con_visited,
do not fully populate IN and OUT.
(df_mir_reset): Likewise.
(df_mir_confluence_0): Set con_visited.
(df_mir_confluence_n): Properly handle implicitely
fully populated IN and OUT as designated by con_visited
and update con_visited accordingly.
The
https://gcc.gnu.org/r11-6707-g7432f255b70811dafaf325d94036ac580891de69https://gcc.gnu.org/r11-6708-gbfab355012ca0f5219da8beb04f2fdaf757d34b7
changes moved the vashl/vashr/vlshr expanders from neon.md to vec-common.md
and changed their condition from TARGET_NEON to ARM_HAVE_<MODE>_ARITH,
so that they apply also for TARGET_HAVE_MVE. But, the ARM_HAVE_<MODE>_ARITH
macros are sometimes true also for TARGET_REALLY_IWMMXT, which at least
from quick skimming of former iwmmxt*.md doesn't have such instructions,
so it seems incorrect to enable them for iwmmxt. Furthermore, even if it
had them, iwmmxt doesn't support any way to broadcast values in those
modes (vec_duplicate and vec_init optabs) and the middle end relies on
if the vector x vector shift/rotate patterns are supported it can emit
vector x scalar shift/rotate by broadcasting the shift amount to a vector.
As the TARGET_NEON vs. TARGET_REALLY_IWMMXT vs. TARGET_HAVE_MVE never seem
to be enabled together, I think we can just write it the following way.
Note, seems iwmmxt actually does support vector x scalar shifts, but doesn't
really enable the optabs that would tell the middle-end code that it does
(and neon and mve don't seem to support those). I'll defer that to anybody
that cares about iwmmxt (if any).
2021-01-29 Jakub Jelinek <jakub@redhat.com>
PR target/98849
* config/arm/vec-common.md (mve_vshlq_<supf><mode>,
vashl<mode>3, vashr<mode>3, vlshr<mode>3): Add
&& !TARGET_REALLY_IWMMXT to conditions.
* gcc.c-torture/compile/pr98849.c: New test.
When expansion emits some control flow insns etc. inside of a former GIMPLE
basic block, find_bb_boundaries needs to split it into multiple basic
blocks.
The code needs to ignore debug insns in decisions how many splits to do or
where in between some non-debug insns the split should be done, but it can
decide where to put debug insns if they can be kept and otherwise throws
them away (they can't stay outside of basic blocks).
On the following testcase, we end up in the bb from expander with
control flow insn
debug insns
barrier
some other insn
(the some other insn is effectively dead after __builtin_unreachable and
we'll optimize that out later).
Without debug insns, we'd do the split when encountering some other insn
and split after PREV_INSN (some other insn), i.e. after barrier (and the
splitting code then moves the barrier in between basic blocks).
But if there are debug insns, we actually split before the first debug insn
that appeared after the control flow insn, so after control flow insn,
and get a basic block that starts with debug insns and then has a barrier
in the middle that nothing moves it out of the bb. This leads to ICEs and
even if it wouldn't, different behavior from -g0.
The reason for treating debug insns that way is a different case, e.g.
control flow insn
debug insns
some other insn
or even
control flow insn
barrier
debug insns
some other insn
where splitting before the first such debug insn allows us to keep them
while otherwise we would have to drop them on the floor, and in those
situations we behave the same with -g0 and -g.
So, the following patch fixes it by resetting debug_insn not just when
splitting the blocks (it is set only after seeing a control flow insn and
before splitting for it if needed), but also when seeing a barrier,
which effectively means we always throw away debug insns after a control
flow insn and before following barrier if any, but there is no way around
that, control flow insn must be the last in the bb (BB_END) and BARRIER
after it, debug insns aren't allowed outside of bb.
We still handle the other cases fine (when there is no barrier or when
debug insns appear only after the barrier).
2021-01-29 Jakub Jelinek <jakub@redhat.com>
PR debug/98331
* cfgbuild.c (find_bb_boundaries): Reset debug_insn when seeing
a BARRIER.
* gcc.dg/pr98331.c: New test.
My r11-86 adjusted cp_parser_class_name to do
- scope = parser->scope;
+ scope = parser->scope ? parser->scope : parser->context->object_type;
if (scope == error_mark_node)
return error_mark_node;
but that caused endless looping in cp_parser_type_specifier_seq (the
while (true) loop) in this invalid test, because we never set a parser
error, therefore cp_parser_type_specifier returned error_mark_node
instead of NULL_TREE, and we never issued the "expected type-specifier"
error.
At first I thought I'd just add cp_parser_simulate_error right before
the return, but that regresses crash81.C -- we'd emit multiple errors
for "T::X". So the next best thing seemed to revert to pre-r11-86
behavior: return early when parser->scope is bad, otherwise proceed to
get the parser error.
gcc/cp/ChangeLog:
PR c++/96137
* parser.c (cp_parser_class_name): If parser->scope is
error_mark_node, return it, otherwise continue.
gcc/testsuite/ChangeLog:
PR c++/96137
* g++.dg/parse/error63.C: New test.
The go1 compiler always turns on debugging, to support Go stack traces
and functions like runtime.Callers. With the recent switch to turn on
DWARF 5 by default, this caused failures with some versions of gas,
such as 2.35.1, because the assembly code would assume DWARF 5 but the
driver would not pass --gdwarf-5 to gas. gas would then give an
error: "file number less than one".
This change avoids that problem by having the gccgo driver spec add a
-g option to the command line if no other -g option is present. The
newly added -g option is passed to the assembler as --gdwarf-5.
* gospec.c (lang_specific_driver): Add -g if no debugging options
were passed.
We emit a bogus warning on the following testcase, suggesting that the
operator should return *this even when it does that already.
The problem is that normally cp_build_indirect_ref_1 ensures that *this
is folded as current_class_ref, but in templates (if return type is
non-dependent, otherwise check_return_expr doesn't check it) it didn't
go through cp_build_indirect_ref_1, but just built another INDIRECT_REF.
Which means it then doesn't compare pointer-equal to current_class_ref.
The following patch fixes it by doing in build_x_indirect_ref for
*this what cp_build_indirect_ref_1 would do.
2021-01-28 Jakub Jelinek <jakub@redhat.com>
PR c++/98841
* typeck.c (build_x_indirect_ref): For *this, return current_class_ref.
* g++.dg/warn/effc5.C: New test.
A year ago I submitted this patch:
~~
Here we trip on the TYPE_USER_ALIGN (t) assert in strip_typedefs: it
gets "const d[0]" with TYPE_USER_ALIGN=0 but the result built by
build_cplus_array_type is "const char[0]" with TYPE_USER_ALIGN=1.
When we strip_typedefs the element of the array "const d", we see it's
a typedef_variant_p, so we look at its DECL_ORIGINAL_TYPE, which is
char, but we need to add the const qualifier, so we call
cp_build_qualified_type -> build_qualified_type
where get_qualified_type checks to see if we already have such a type
by walking the variants list, which in this case is:
char -> c -> const char -> const char -> d -> const d
Because check_base_type only checks TYPE_ALIGN and not TYPE_USER_ALIGN,
we choose the first const char, which has TYPE_USER_ALIGN set. If the
element type of an array has TYPE_USER_ALIGN, the array type gets it too.
So we can make check_base_type stricter. I was afraid that it might make
us reuse types less often, but measuring showed that we build the same
amount of types with and without the patch, while bootstrapping.
~~
However, the patch broke a few tests on STRICT_ALIGNMENT platforms and
had to be reverted. This is another try. The original patch is kept
unchanged, but I added the finalize_type_size hunk that ought to fix the
STRICT_ALIGNMENT issues.
The problem is that finalize_type_size can clear TYPE_USER_ALIGN on the
main variant of a type, but doesn't clear it on any of the variants.
Then we end up with types which share the same TYPE_MAIN_VARIANT, but
their TYPE_CANONICAL differs and then the usual "canonical types differ
for identical types" follows.
I've created alignas19.C to exercise this scenario. What happens is:
- when parsing the class S we create a type S in xref_tag,
- we see alignas(8) so common_handle_aligned_attribute sets T_U_A in S,
- we parse the member function fn and build_memfn_type creates a copy
of S to add const; this variant has T_U_A set,
- we finish_struct S which calls layout_class_type -> finish_record_type
-> finalize_size_type where we reset T_U_A in S (but const S keeps it),
- finish_non_static_data_member for arr calls maybe_dummy_object with
type = S,
- maybe_dummy_object calls same_type_ignoring_top_level_qualifiers_p
to check if S and TREE_TYPE (current_class_ref), which is const S,
are the same,
- same_type_ignoring_top_level_qualifiers_p creates cv-unqualified
versions of the passed types. Previously we'd use our main variant
S when stripping "const S" of const, but since the T_U_A flags don't
match (check_base_type), we create a new variant S'. Then we crash in
comptypes because S and S' have the same TYPE_MAIN_VARIANT but
different TYPE_CANONICALs.
With my patch we'll clear T_U_A for S's variants too, and then instead
of S' we'll just use S.
gcc/ChangeLog:
PR c++/94775
* stor-layout.c (finalize_type_size): If we reset TYPE_USER_ALIGN in
the main variant, maybe reset it in its variants too.
* tree.c (check_base_type): Return true only if TYPE_USER_ALIGN match.
(check_aligned_type): Check if TYPE_USER_ALIGN match.
gcc/testsuite/ChangeLog:
PR c++/94775
* g++.dg/cpp0x/alignas19.C: New test.
* g++.dg/warn/Warray-bounds15.C: New test.
Neon vector comparisons have a dedicated version when comparing with
constant zero: it means its cost is free.
Adjust the cost in arm_rtx_costs_internal accordingly, for Neon only,
since MVE does not support this.
2021-01-28 Christophe Lyon <christophe.lyon@linaro.org>
gcc/
PR target/98730
* config/arm/arm.c (arm_rtx_costs_internal): Adjust cost of vector
of constant zero for comparisons.
gcc/testsuite/
PR target/98730
* gcc.target/arm/simd/vceqzq_p64.c: Update expected result.
The PowerPC has two different 128-bit long double types, one that uses a pair
of doubles to get more mantissa range, and the other using the IEEE 128-bit
754R binary floating point format. The pair of doubles has been used as the
traditional format, and we are in the process of moving to allow an
implementation to switch to using IEEE 128-bit floating point. The GLIBC and
LIBSTDC++ libraries have been modified to have functions using the two
different formats in their libraries with different names.
This patch goes through all of the built-in functions that either take long
double arguments or return long double, and changes the name from the
traditional name to the IEEE 128-bit name. The minimum GLIBC version to
support IEEE 128-bit floating point is 2.32.
The names changed are:
* <name>l is usually mapped to __<name>ieee128;
* <extra>printf is mapped to __<extra>printfieee128; (and)
* <extra>scanf is mapped to __isoc99_<extra>scanfieee128.
A few functions have different mappings:
* dreml => __remainderieee128;
* gammal => __lgammaieee128;
* gammal_r => __lgammaieee128_r;
* lgammal_r => __lgammaieee128_r;
* nexttoward => __nexttoward_to_ieee128;
* nexttowardf => __nexttowardf_to_ieee128;
* nexttowardl => __nexttowardl_to_ieee128;
* pow10l => __exp10ieee128;
* scalbl => __scalbieee128;
* significandl => __significandieee128; (and)
* sincosl => __sincosieee128.
gcc/
2021-01-28 Michael Meissner <meissner@linux.ibm.com>
* config/rs6000/rs6000.c (rs6000_mangle_decl_assembler_name): Add
support for mapping built-in function names for long double
built-in functions if long double is IEEE 128-bit.
gcc/testsuite/
2021-01-28 Michael Meissner <meissner@linux.ibm.com>
* gcc.target/powerpc/float128-longdouble-math.c: New test.
* gcc.target/powerpc/float128-longdouble-stdio.c: New test.
* gcc.target/powerpc/float128-math.c: Adjust test for new name
being generated. Add support for running test on power10. Add
support for running if long double defaults to 64-bits.
As the testcase shows, for vars appearing in templates, we don't attach
the asm spec string to the pattern decls, nor pass it back to cp_finish_decl
during instantiation.
The following patch does that.
2021-01-28 Jakub Jelinek <jakub@redhat.com>
PR c++/33661
PR c++/98847
* decl.c (cp_finish_decl): For register vars with asmspec in templates
call set_user_assembler_name and set DECL_HARD_REGISTER.
* pt.c (tsubst_expr): When instantiating DECL_HARD_REGISTER vars,
pass asmspec_tree to cp_finish_decl.
* g++.target/i386/pr98847.C: New test.
