For some large arguments, the dbl-64 implementation of remainder gives
zero results with the wrong sign, resulting from a subtraction that is
mathematically correct but does not guarantee that a zero result has
the sign of the first argument to remainder. This patch adds an
appropriate check for this case, similar to other implementations of
remainder in the case of equality, and adds tests of remainder on
inputs already used to test remquo.
Tested for x86_64 and x86.
[BZ #19201]
* sysdeps/ieee754/dbl-64/e_remainder.c (__ieee754_remainder):
Check for zero remainder in case of large exponents and ensure
correct sign of result in that case.
* math/libm-test.inc (remainder_test_data): Add more tests.
nextafter and nexttoward fail to set errno on overflow and underflow.
This patch makes them do so in cases that should include all the cases
where such errno setting is required by glibc's goals for when to set
errno (but not all cases of underflow where the result is nonzero and
so glibc's goals do not require errno setting).
Tested for x86_64, x86, mips64 and powerpc.
[BZ #6799]
* math/s_nextafter.c: Include <errno.h>.
(__nextafter): Set errno on overflow and underflow.
* math/s_nexttowardf.c: Include <errno.h>.
(__nexttowardf): Set errno on overflow and underflow.
* sysdeps/i386/fpu/s_nextafterl.c: Include <errno.h>.
(__nextafterl): Set errno on overflow and underflow.
* sysdeps/i386/fpu/s_nexttoward.c: Include <errno.h>.
(__nexttoward): Set errno on overflow and underflow.
* sysdeps/i386/fpu/s_nexttowardf.c: Include <errno.h>.
(__nexttowardf): Set errno on overflow and underflow.
* sysdeps/ieee754/flt-32/s_nextafterf.c: Include <errno.h>.
(__nextafterf): Set errno on overflow and underflow.
* sysdeps/ieee754/ldbl-128/s_nextafterl.c: Include <errno.h>.
(__nextafterl): Set errno on overflow and underflow.
* sysdeps/ieee754/ldbl-128/s_nexttoward.c: Include <errno.h>.
(__nexttoward): Set errno on overflow and underflow.
* sysdeps/ieee754/ldbl-128/s_nexttowardf.c: Include <errno.h>.
(__nexttowardf): Set errno on overflow and underflow.
* sysdeps/ieee754/ldbl-128ibm/s_nextafterl.c: Include <errno.h>.
(__nextafterl): Set errno on overflow and underflow.
* sysdeps/ieee754/ldbl-128ibm/s_nexttoward.c: Include <errno.h>.
(__nexttoward): Set errno on overflow and underflow.
* sysdeps/ieee754/ldbl-128ibm/s_nexttowardf.c: Include <errno.h>.
(__nexttowardf): Set errno on overflow and underflow.
* sysdeps/ieee754/ldbl-96/s_nexttoward.c: Include <errno.h>.
(__nexttoward): Set errno on overflow and underflow.
* sysdeps/ieee754/ldbl-96/s_nexttowardf.c: Include <errno.h>.
(__nexttowardf): Set errno on overflow and underflow.
* sysdeps/ieee754/ldbl-opt/s_nexttowardfd.c: Include <errno.h>.
(__nldbl_nexttowardf): Set errno on overflow and underflow.
* sysdeps/m68k/m680x0/fpu/s_nextafterl.c: Include <errno.h>.
(__nextafterl): Set errno on overflow and underflow.
* math/libm-test.inc (nextafter_test_data): Do not allow errno
setting to be missing on overflow. Add more tests.
(nexttoward_test_data): Likewise.
The ldbl-128 version of log1pl raises a spurious "invalid" exception
for a -qNaN argument. This patch fixes this by making the initial
check for infinities and NaNs handle arguments of both signs in such a
way that NaNs result in a NaN being returned (quietly if the input NaN
was quiet) while +Inf results in +Inf being returned and -Inf results
in a qNaN being returned with "invalid" exception raised.
Tested for mips64.
[BZ #19189]
* sysdeps/ieee754/ldbl-128/s_log1pl.c (__log1pl): Make check for
non-finite argument handle arguments with negative sign.
The libm drem functions just call the corresponding __remainder
functions. This patch removes the unnecessary wrappers by making them
into weak aliases at the ELF level.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #16171]
* math/w_remainder.c (drem): Define as weak alias of __remainder.
[NO_LONG_DOUBLE] (dreml): Define as weak alias of __remainder.
* math/w_remainderf.c (dremf): Define as weak alias of
__remainderf.
* math/w_remainderl.c (dreml): Define as weak alias of
__remainderl.
* sysdeps/ia64/fpu/e_remainder.S (drem): Define as weak alias of
__remainder.
* sysdeps/ia64/fpu/e_remainderf.S (dremf): Define as weak alias of
__remainderf.
* sysdeps/ia64/fpu/e_remainderl.S (dreml): Define as weak alias of
__remainderl.
* sysdeps/ieee754/ldbl-opt/nldbl-remainder.c (dreml): Define as
weak alias of remainderl.
* sysdeps/ieee754/ldbl-opt/w_remainder.c
[LONG_DOUBLE_COMPAT(libm, GLIBC_2_0)] (__drem): Define as strong
alias of __remainder.
[LONG_DOUBLE_COMPAT(libm, GLIBC_2_0)] (dreml): Use compat_symbol.
* sysdeps/ieee754/ldbl-opt/w_remainderl.c (__dreml): Define as
strong alias of __remainderl.
(dreml): Use long_double_symbol.
* math/Makefile (libm-calls): Remove w_drem.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Remove drem.
(CFLAGS-nldbl-drem.c): Remove variable.
(CFLAGS-nldbl-remainder.c): Add -fno-builtin-dreml.
* math/w_drem.c: Remove file.
* math/w_dremf.c: Likewise.
* math/w_dreml.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-drem.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_drem.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_dreml.c: Likewise.
fenv_t should include architecture-specific floating-point modes and
status flags. i386 and x86_64 fesetenv limit which bits they use from
the x87 status and control words, when using saved state, and limit
which parts of the state they set to fixed values, when using
FE_DFL_ENV / FE_NOMASK_ENV. The following should be included but are
excluded in at least some cases: status and masking for the "denormal
operand" exception (which isn't part of FE_ALL_EXCEPT); precision
control (explicitly mentioned in Annex F as something that counts as
part of the floating-point environment); MXCSR FZ and DAZ bits (for
FE_DFL_ENV and FE_NOMASK_ENV). This patch arranges for this extra
state to be handled by fesetenv (and thereby by feupdateenv, which
calls fesetenv).
(Note that glibc functions using floating point are not generally
expected to work correctly with non-default values of this state,
especially precision control, but it is still logically part of the
floating-point environment and should be handled as such by fesetenv.
Changes to the state relating to subnormals ought generally to work
with libm functions when the arguments aren't subnormal and neither
are the expected results; that's a consequence of functions avoiding
spurious internal underflows.)
A question arising from this is whether FE_NOMASK_ENV should or should
not mask the "denormal operand" exception. I decided it should mask
that exception. This is the status quo - previously that exception
could only be unmasked by direct manipulation of control registers
(possibly via <fpu_control.h>). In addition, it means that use of
FE_NOMASK_ENV leaves a floating-point environment the same as could be
obtained by fesetenv (FE_DFL_ENV); feenableexcept (FE_ALL_EXCEPT);,
rather than an environment in which an exception is unmasked that
could only be masked again by using fesetenv with FE_DFL_ENV (or a
previously saved environment) - this exception not being usable with
other <fenv.h> functions because it's outside FE_ALL_EXCEPT.
Tested for x86_64 and x86.
[BZ #16068]
* sysdeps/i386/fpu/fesetenv.c: Include <fpu_control.h>.
(FE_ALL_EXCEPT_X86): New macro.
(__fesetenv): Use FE_ALL_EXCEPT_X86 in most places instead of
FE_ALL_EXCEPT. Ensure precision control is included in
floating-point state. Ensure that FE_DFL_ENV and FE_NOMASK_ENV
handle "denormal operand exception" and clear FZ and DAZ bits.
* sysdeps/x86_64/fpu/fesetenv.c: Include <fpu_control.h>.
(FE_ALL_EXCEPT_X86): New macro.
(__fesetenv): Use FE_ALL_EXCEPT_X86 in most places instead of
FE_ALL_EXCEPT. Ensure precision control is included in
floating-point state. Ensure that FE_DFL_ENV and FE_NOMASK_ENV
handle "denormal operand exception" and clear FZ and DAZ bits.
* sysdeps/x86/fpu/test-fenv-sse-2.c: New file.
* sysdeps/x86/fpu/test-fenv-x87.c: Likewise.
* sysdeps/x86/fpu/Makefile [$(subdir) = math] (tests): Add
test-fenv-x87 and test-fenv-sse-2.
[$(subdir) = math] (CFLAGS-test-fenv-sse-2.c): New variable.
The i386 and x86_64 versions of fesetenv, when called with FE_DFL_ENV
or FE_NOMASK_ENV as argument, do not clear SSE exceptions raised in
MXCSR. These arguments should, like other fenv_t values, represent
the whole of the floating-point state, so such exceptions should be
cleared; this patch adds the required clearing. (Discovered while
working on bug 16068.)
Tested for x86_64 and x86.
[BZ #19181]
* sysdeps/i386/fpu/fesetenv.c (__fesetenv): Clear already-raised
SSE exceptions when argument is FE_DFL_ENV or FE_NOMASK_ENV.
* sysdeps/x86_64/fpu/fesetenv.c (__fesetenv): Likewise.
* math/test-fenv-clear-main.c: New file.
* math/test-fenv-clear.c: Likewise.
* math/Makefile (tests): Add test-fenv-clear.
* sysdeps/x86/fpu/test-fenv-clear-sse.c: New file.
* sysdeps/x86/fpu/Makefile [$(subdir) = math] (tests): Add
test-fenv-clear-sse.
[$(subdir) = math] (CFLAGS-test-fenv-clear-sse.c): New variable.
MIPS16 atomics used __sync_* with GCC before 4.7, which as noted in
bug 17404 is missing the required barrier semantics for
atomic_exchange_rel. This patch removes the code in question as dead
now GCC before 4.7 is no longer supported for building glibc.
Sanity tested with builds for MIPS.
[BZ #17404]
* sysdeps/mips/atomic-machine.h
[__GNUC_PREREQ (4, 8) || (__mips16 && __GNUC_PREREQ (4, 7))]:
Change conditional to [__GNUC_PREREQ (4, 8) || __mips16].
[__mips16 && !__GNUC_PREREQ (4, 7)]: Remove conditional code.
The skip_lock_out_of_tbegin_retries adaptive parameter was
not being used correctly, nor as described. This prevents
a fallback for all users of the lock if a transient abort
occurs within the accepted number of retries.
[BZ #19174]
* sysdeps/powerpc/nptl/elide.h (__elide_lock): Fix usage of
.skip_lock_out_of_tbegin_retries.
* sysdeps/unix/sysv/linux/powerpc/elision-lock.c
(__lll_lock_elision): Likewise, and respect a value of
try_tbegin <= 0.
This patch implements a requirement of GCC 4.7 or later to build
glibc.
This was discussed in the thread starting at
<https://sourceware.org/ml/libc-alpha/2015-08/msg00851.html>.
Concerns were expressed by Mike and David. At
<https://sourceware.org/ml/libc-alpha/2015-10/msg00453.html> I have
provided a 14-patch series showing in outline the cleanups facilitated
by this version requirement, as requested by Mike (this patch is the
first in that series, with the addition of a NEWS entry). Given the
absence of further concerns or alternative proposals for criteria for
updates to this version requirement as requested in
<https://sourceware.org/ml/libc-alpha/2015-10/msg00065.html>, I am
interpreting this as "absence of sustained opposition" under Carlos's
definition at <https://sourceware.org/glibc/wiki/Consensus> and
proposing this patch for inclusion in glibc. I'd like to remind
people testing with 4.6 that if they move to testing with GCC 5 then
it will probably be about four years before they need to update the
compiler they use to test glibc again.
Although on the principles of time-based updates I think a move to
requiring binutils 2.23 would be reasonable, I'm not currently aware
of any cleanups that would facilitate so am not proposing that at this
time (but would expect to propose a move to requiring binutils 2.24 in
a year's time, as that brings features such as AVX512 support that
should allow some conditionals to be cleaned up). If someone thinks a
move to requiring 2.23 would help clean things up for their
architecture, please speak up. (And in general, I suspect there are
lots of architecture-specific configure tests that could be removed on
the basis of current GCC and binutils version requirements, given how
I've found architecture-independent tests obsolete on the basis of
version requirements going back 20 years.)
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
* configure.ac (libc_cv_compiler_ok): Require GCC 4.7 or later.
* configure: Regenerated.
* manual/install.texi (Tools for Compilation): Document
requirement for GCC 4.7 or later.
* INSTALL: Regenerated.
j1 and jn can underflow for small arguments, but fail to set errno
when underflowing to 0. This patch fixes them to set errno in that
case.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #18611]
* sysdeps/ieee754/dbl-64/e_j1.c (__ieee754_j1): Set errno and
avoid excess range and precision on underflow.
* sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_jn): Likewise.
* sysdeps/ieee754/flt-32/e_j1f.c (__ieee754_j1f): Likewise.
* sysdeps/ieee754/flt-32/e_jnf.c (__ieee754_jnf): Likewise.
* sysdeps/ieee754/ldbl-128/e_j1l.c (__ieee754_j1l): Set errno on
underflow.
* sysdeps/ieee754/ldbl-128/e_jnl.c (__ieee754_jnl): Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_jnl.c (__ieee754_jnl): Likewise.
* sysdeps/ieee754/ldbl-96/e_j1l.c (__ieee754_j1l): Likewise.
* sysdeps/ieee754/ldbl-96/e_jnl.c (__ieee754_jnl): Likewise.
* math/auto-libm-test-in: Do not allow missing errno setting for
tests of j1 and jn.
* math/auto-libm-test-out: Regenerated.
The implementations of nearbyint functions using x87 floating point
(i386 all versions, x86_64 long double only) use the fclex
instruction, which clears any exceptions that were raised before the
function was called. These functions must not clear exceptions that
were raised before they were called.
This patch fixes these functions to save and restore the whole
floating-point environment (fnstenv / fldenv) as the way of avoiding
raising "inexact" (recall that there isn't an x87 instruction for
loading just the status word, so the whole environment has to be saved
and loaded instead - the code already saved and loaded the control
word, which is now obtained from the saved environment after this
patch, to disable traps on "inexact"). In the case of the long double
functions, any "invalid" exception from frndint (applied to a
signaling NaN) needs merging into the saved state; this issue doesn't
apply to the float and double functions because that exception would
have been raised when the argument is loaded, before the environment
is saved.
[BZ #15491]
* sysdeps/i386/fpu/s_nearbyint.S (__nearbyint): Save and restore
floating-point environment instead of clearing all exceptions.
* sysdeps/i386/fpu/s_nearbyintf.S (__nearbyintf): Likewise.
* sysdeps/i386/fpu/s_nearbyintl.S (__nearbyintl): Likewise,
merging in "invalid" exceptions from frndint.
* sysdeps/x86_64/fpu/s_nearbyintl.S (__nearbyintl): Likewise.
* math/test-nearbyint-except.c: New file.
* math/Makefile (tests): Add test-nearbyint-except.
Wilco fixed this tilegx bug in commit fe8c2b33ae ("Since we
now inline isinf, isnan and isfinite in math.h, replace uses
of __isinf_ns(l/f) with isinf, and remove the unused inlines
__isinf_ns(l/f), __isnan(f) and __finite(f).")
I verified that reverting math/s_cprojf.c back to using the
sysdeps/ieee754/flt-32/math_private.h version of __isinf_nsf()
instead of isinf() brings back the bug on tilegx.
My recent addition of more tests for j0 showed up that the ldbl-128
implementation of j0l produces spurious underflow exceptions for
arguments close to 0 (when the result is very close to 1). This patch
fixes this by just returning the argument in that case.
Tested for mips64 (where it fixes the recently-added tests that were
previously failing).
[BZ #19156]
* sysdeps/ieee754/ldbl-128/e_j0l.c (__ieee754_j0l): Return 1 for
arguments very close to 0.
The previous code used to evaluate the preprocessor token is_lock_free to
a variable before starting a transaction. This behavior can cause an
error if another thread got the lock (without using a transaction)
between the evaluation of the token and the beginning of the transaction.
This bug can be triggered with the following order of events:
1. The lock accessed by is_lock_free is free.
2. Thread T1 evaluates is_lock_free and stores into register R1 that the
lock is free.
3. Thread T2 acquires the same lock used in is_lock_free.
4. T1 begins the transaction, creating a memory barrier where is_lock_free
is false, but R1 is true.
5. T1 reads R1 and doesn't abort the transaction.
6. T1 calls ELIDE_UNLOCK, which reads false from is_lock_free and decides
to unlock a lock acquired by T2, leading to undefined behavior.
This patch delays the evaluation of is_lock_free to inside a transaction
by moving this part of the code to the macro ELIDE_LOCK.
[BZ #18743]
* sysdeps/powerpc/nptl/elide.h (__elide_lock): Move most of this
code to...
(ELIDE_LOCK): ...here.
(__get_new_count): New function with part of the code from
__elide_lock that updates the value of adapt_count after a
transaction abort.
(__elided_trylock): Moved this code to...
(ELIDE_TRYLOCK): ...here.
The previous (11th) version of the Hungarian spelling rules (released
in 1984) said that the separator had to be a dot, e.g. 10.35 meaning
10 o'clock 35 minutes. glibc correctly implements this.
The brand new (12th) version, in effect since September 1, 2015 adopts
to the common use of colon (especially in the digital world) and
allows to use either separator, without even expressing a preference.
For computer systems, using colons is way more typical and probably
easier to recognize. Dot is typically used in printed materials.
It also avoids an almost ambiguous situation where a space makes a
difference, e.g. "10.15-ig" means "until 10 o'clock 15 minutes"
whereas "10. 15-ig" means "until 15th of October". So I believe using
the colon as the separator is not only more frequent in the computer
world, but is also easier and quicker to recognize for the brain that
it's about hour:minute rather than month and day. And luckily it's now
equally correct according to the official rules.
11th edition: http://helyesiras.mta.hu/helyesiras/default/akh11
12th edition: http://helyesiras.mta.hu/helyesiras/default/akh12
In both editions it's the very last (299th and 300th, respectively) rule.
Microsoft also uses and recommends a colon since at least May 2011:
http://download.microsoft.com/download/e/6/1/e61266b2-d8b4-4fe0-a553-f01dc3976675/hun-hun-StyleGuide.pdf
The time format is different in common language and in the language of
IT. In common texts we usually do not abbreviate, so the full forms are
used: “7 óra 10 perckor csörgött a telefon”. However, the short format,
consisting of numerals only, can also be used. In this case a period
must be used between the two numbers and there must not be a space
between them: “találkozzunk 10.45-kor”.
However, in software mostly the short format is used, and the numbers
are separated by a colon. An obvious example is the clock in the bottom
right corner of your screen, thus 18:31.
Only i386 implements epoll_pwait in assembly code withot cancellation
support. All other architectures implement epoll_pwait in epoll_pwait.c
with
int epoll_pwait (int epfd, struct epoll_event *events,
int maxevents, int timeout,
const sigset_t *set)
{
return SYSCALL_CANCEL (epoll_pwait, epfd, events, maxevents,
timeout, set, _NSIG / 8);
}
Although there is no test for epoll_pwait in glibc, since SYSCALL_CANCEL
works on i386 and epoll_pwait.c works for other architectures, it is
safe to assume that epoll_pwait.c with SYSCALL_CANCEL also works on
i386.
[BZ #19137]
* sysdeps/unix/sysv/linux/i386/Makefile (CFLAGS-epoll_pwait.c):
Add -fomit-frame-pointer.
* sysdeps/unix/sysv/linux/i386/epoll_pwait.S: Remove file.
Honoring the LD_POINTER_GUARD environment variable in AT_SECURE mode
has security implications. This commit enables pointer guard
unconditionally, and the environment variable is now ignored.
[BZ #18928]
* sysdeps/generic/ldsodefs.h (struct rtld_global_ro): Remove
_dl_pointer_guard member.
* elf/rtld.c (_rtld_global_ro): Remove _dl_pointer_guard
initializer.
(security_init): Always set up pointer guard.
(process_envvars): Do not process LD_POINTER_GUARD.
The powerpc32 implementation of lround and lroundf can produce
spurious exceptions from adding 0.5 then converting to integer. This
includes "inexact" from the conversion to integer (not allowed for
integer arguments to these functions), and, for larger integer
arguments, "inexact", and "overflow" when rounding upward, from the
addition. In addition, "inexact" is not allowed together with
"invalid" and so inexact addition must be avoided when the integer
will be out of range of 32-bit long, whether or not the argument is an
integer.
This patch fixes these problems. As in the powerpc64 llround
implementation, a check is added for too-large arguments; in the
powerpc64 case that means arguments at least 2^52 in magnitude (so
that 0.5 cannot be added exactly), while in this case it means
arguments for which the result would overflow "long". In those cases
a suitable overflowing value is used for the integer conversion
without adding 0.5, while for smaller arguments it's tested whether
the argument is an integer (by adding and subtracting 2^52 to the
absolute value and comparing with the original absolute value) to
avoid adding 0.5 to integers and generating spurious "inexact".
This code is not used when the power5+ sysdeps directories are used,
as there's a separate power5+ version of these functions..
Tested for powerpc. This gets test-float (for a default powerpc32
hard-float build without any --with-cpu) back to the point where it
should pass once powerpc ulps are regenerated; test-double still needs
another problem with exceptions fixed to get back to that point (and I
haven't looked lately at what default powerpc64 results are like).
[BZ #19134]
* sysdeps/powerpc/powerpc32/fpu/s_lround.S (.LC1): New object.
(.LC2): Likewise.
(.LC3): Likewise.
(__lround): Do not add 0.5 to integer or out-of-range arguments.
_dl_tlsdesc_resolve_hold calls into a C function that clobbers r0,
but it assumes the original argument is still in r0 after the call.
This can cause crash in case of concurrent TLS access when TLSDESC
is in use (-mtls-dialect=gnu2).
Run into this while fixing BZ 18572.
Both r0 and r1 are saved/restored so the stack remains 8 byte aligned.
[BZ #19129]
* sysdeps/arm/dl-tlsdesc.S (_dl_tlsdesc_resolve_hold): Save and restore
r0 and r1.
Linker in binutils 2.26 and newer generate GOT references instead
PLT references when -z now is passed to linker. We need to extend
scripts/localplt.awk to allow PLT or GOT references.
[BZ #19007]
* scripts/localplt.awk: Also allow GOT references.
* sysdeps/unix/sysv/linux/i386/localplt.data: Mark
_Unwind_Find_FDE, calloc, memalign, realloc and __libc_memalign
with "+ REL R_386_GLOB_DAT".
* sysdeps/x86_64/localplt.data: Mark calloc, memalign, realloc
and __libc_memalign with "+ RELA R_X86_64_GLOB_DAT".
The powerpc32 implementations of llroundf and llround produce spurious
and missing exceptions (some arising from such exceptions from
conversions to long long, some present even when fctidz is used).
This patch fixes those problems in a similar way to the llrint /
llrintf fixes. The spurious exceptions in the fctidz case for large
arguments arise from a converted value that saturated as LLONG_MAX
being converted back to float or double (the conversion back being
inexact, but "inexact" must not be raised together with "invalid"),
and from the subtraction x - xrf also being inexact for sufficiently
large arguments (whether the saturation was to LLONG_MAX or
LLONG_MIN); those are fixed by returning early if the argument is
large enough that no rounding is needed.
This code is not used for --with-cpu=power4 builds (I suspect the code
used in that case may also produce spurious "inexact" exceptions, but
that's something to investigate later).
Tested for powerpc.
[BZ #19125]
* sysdeps/powerpc/powerpc32/fpu/s_llround.c: Include <limits.h>,
<math_private.h> and <stdint.h>.
(__llround): Avoid conversions to and from long long int, and
subtractions, where those might raise spurious exceptions.
* sysdeps/powerpc/powerpc32/fpu/s_llroundf.c: Include
<math_private.h> and <stdint.h>.
(__llroundf): Avoid conversions to and from long long int, and
subtractions, where those might raise spurious exceptions.
When x86-64 assmebler doesn't support AVX512, we should make
_dl_runtime_resolve_avx512/_dl_runtime_profile_avx512 as aliases of
_dl_runtime_resolve_avx/_dl_runtime_profile_avx. Tested on x86-64
using GCC 5.2 with binutils 20151008 and GCC 4.8 with binutils 20130219.
There are no differences in ld.so with binutils 20151008. There are no
unexpected failures with binutils 20130219 and 20151008.
[BZ #19124]
* sysdeps/x86_64/dl-trampoline.S [!HAVE_AVX512_ASM_SUPPORT]
(_dl_runtime_resolve_avx512): Make it a hidden alias of
_dl_runtime_resolve_avx.
(_dl_runtime_profile_avx512): Make it a hidden alias of
_dl_runtime_profile_avx.
The versions of llrint and llrintf for older powerpc32 processors
convert the results of __rint / __rintf to long long int, resulting in
spurious exceptions from such casts in certain cases. This patch
makes glibc work around the problems with the libgcc conversions when
the compiler used to build glibc doesn't use the fctidz instruction
for them.
Tested for powerpc.
[BZ #16422]
* sysdeps/powerpc/powerpc32/fpu/configure.ac (libc_cv_ppc_fctidz):
New configure test.
* sysdeps/powerpc/powerpc32/fpu/configure: Regenerated.
* config.h.in [_LIBC] (HAVE_PPC_FCTIDZ): New macro.
* sysdeps/powerpc/powerpc32/fpu/s_llrint.c: Include <limits.h>,
<math_private.h> and <stdint.h>.
(__llrint): Avoid conversions to long long int where those might
raise spurious exceptions.
* sysdeps/powerpc/powerpc32/fpu/s_llrintf.c: Include
<math_private.h> and <stdint.h>.
(__llrintf): Avoid conversions to long long int where those might
raise spurious exceptions.
Similar to the recent fix for MIPS, ARM is also missing correct
exceptions on overflow from llrint and llround functions because casts
from floating-point types to long long do not result in correct
exceptions on overflow. This patch enables the fix for this for ARM.
Tested for ARM.
[BZ #15470]
* sysdeps/arm/fix-fp-int-convert-overflow.h: New file.
For 32-bit MIPS and some other systems, various of the lrint, llrint,
lround, llround functions can be missing exceptions on overflow
because casts do not (in current GCC) result in the proper
exceptions. In the MIPS case there are two problems here: MIPS I code
generation uses an assembler macro that doesn't raise exceptions,
while the libgcc conversions of floating-point values to long long
also do not raise "invalid" on all overflow cases (and can raise
spurious "inexact").
This patch adds support in the generic code (only the functions for
which this problem has actually been seen) for forcing the "invalid"
exception in the problem cases, and enables that support for the
affected MIPS cases.
Tested for MIPS; also tested for x86_64 and x86 that installed
stripped shared libraries are unchanged by this patch.
[BZ #16399]
* sysdeps/generic/fix-fp-int-convert-overflow.h: New file.
* sysdeps/ieee754/dbl-64/s_llrint.c: Include <fenv.h>, <limits.h>
and <fix-fp-int-convert-overflow.h>.
(__llrint) [FE_INVALID]: Force FE_INVALID exception as needed if
FIX_DBL_LLONG_CONVERT_OVERFLOW.
* sysdeps/ieee754/dbl-64/s_llround.c: Include <fenv.h>, <limits.h>
and <fix-fp-int-convert-overflow.h>.
(__llround) [FE_INVALID]: Force FE_INVALID exception as needed if
FIX_DBL_LLONG_CONVERT_OVERFLOW.
* sysdeps/ieee754/dbl-64/s_lrint.c: Include
<fix-fp-int-convert-overflow.h>.
(__lrint) [FE_INVALID]: Force FE_INVALID exception as needed if
FIX_DBL_LLONG_CONVERT_OVERFLOW.
* sysdeps/ieee754/dbl-64/s_lround.c: Include
<fix-fp-int-convert-overflow.h>.
(__lround) [FE_INVALID]: Force FE_INVALID exception as needed if
FIX_DBL_LLONG_CONVERT_OVERFLOW.
* sysdeps/ieee754/flt-32/s_llrintf.c: Include <fenv.h>, <limits.h>
and <fix-fp-int-convert-overflow.h>.
(__llrintf) [FE_INVALID]: Force FE_INVALID exception as needed if
FIX_DBL_LLONG_CONVERT_OVERFLOW.
* sysdeps/ieee754/flt-32/s_llroundf.c: Include <fenv.h>,
<limits.h> and <fix-fp-int-convert-overflow.h>.
(__llroundf) [FE_INVALID]: Force FE_INVALID exception as needed if
FIX_DBL_LLONG_CONVERT_OVERFLOW.
* sysdeps/ieee754/flt-32/s_lrintf.c: Include <fenv.h>, <limits.h>
and <fix-fp-int-convert-overflow.h>.
(__lrintf) [FE_INVALID]: Force FE_INVALID exception as needed if
FIX_DBL_LLONG_CONVERT_OVERFLOW.
* sysdeps/ieee754/flt-32/s_lroundf.c: Include <fenv.h>, <limits.h>
and <fix-fp-int-convert-overflow.h>.
(__lroundf) [FE_INVALID]: Force FE_INVALID exception as needed if
FIX_DBL_LLONG_CONVERT_OVERFLOW.
* sysdeps/mips/mips32/fpu/fix-fp-int-convert-overflow.h: New file.
The dbl-64 implementation of lrint produces incorrect results for some
arguments with 64-bit long because a 32-bit (unsigned) low part of the
mantissa is shifted left, losing high bits in the process. This patch
fixes this by casting to long int before shifting, as in lround (as
this case only applies for 64-bit long, there are no issues with
sign-extension).
Tested for mips64 (n64).
[BZ #19095]
* sysdeps/ieee754/dbl-64/s_lrint.c (__lrint): Cast low part of
mantissa to long int before shifting left.
The dbl-64, ldbl-96 and ldbl-128 implementations of lrint and llrint
fail to produce "invalid" exceptions in cases where the rounded result
overflows the target type, but truncating the floating-point argument
to the next integer towards zero does not overflow it (so in
particular casts do not produce such exceptions). (This issue cannot
arise for float, or for double with 64-bit target type, or for ldbl-96
with 64-bit target type and negative arguments, because of
insufficient precision in the floating-point type for arguments with
the relevant property to exist. It also obviously cannot arise in
FE_TOWARDZERO mode.)
This patch fixes these problems by inserting checks for the special
cases that can occur in each implementation, and explicitly raising
FE_INVALID (and avoiding the cast if it might raise spurious
FE_INEXACT, while raising FE_INEXACT explicitly in the cases where it
is needed; unlike lround and llround, FE_INEXACT is required, not
optional, for these functions for a within-range inexact result).
The fixes are conditional on FE_INVALID or FE_INEXACT being defined.
If any future architecture supports one but not both of those
exceptions, the code will fail to compile and need fixing to handle
that case (this seemed better than conditioning on both macros being
defined, resulting in code that would compile but quietly miss
exceptions on such a system).
Tested for x86_64, x86 and mips64. Tested the ldbl-96 changes (only
relevant for ia64, it appears) on x86_64 by removing the x86_64
versions of lrintl / llrintl.
[BZ #19094]
* sysdeps/ieee754/dbl-64/s_lrint.c: Include <fenv.h> and
<limits.h>.
(__lrint) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception
when result overflows but exception would not result from cast.
* sysdeps/ieee754/ldbl-128/s_llrintl.c: Include <fenv.h> and
<limits.h>.
(__llrintl) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception
when result overflows but exception would not result from cast.
* sysdeps/ieee754/ldbl-128/s_lrintl.c: Include <fenv.h> and
<limits.h>.
(__lrintl) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception
when result overflows but exception would not result from cast.
* sysdeps/ieee754/ldbl-96/s_llrintl.c: Include <fenv.h> and
<limits.h>.
(__llrintl) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception
when result overflows but exception would not result from cast.
* sysdeps/ieee754/ldbl-96/s_lrintl.c: Include <fenv.h> and
<limits.h>.
(__lrintl) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception
when result overflows but exception would not result from cast.
* math/libm-test.inc (lrint_test_data): Add more tests.
(llrint_test_data): Likewise.
The optimization introduced in commit
f13c2a8dff, causes regressions in
sorting for languages that have digraphs that change sort order, like
cs_CZ which sorts ch between h and i.
My analysis shows the fast-forwarding optimization in STRCOLL advances
through a digraph while possibly stopping in the middle which results
in a subsequent skipping of the digraph and incorrect sorting. The
optimization is incorrect as implemented and because of that I'm
removing it for 2.23, and I will also commit this fix for 2.22 where
it was originally introduced.
This patch reverts the optimization, introduces a new bug-strcoll2.c
regression test that tests both cs_CZ.UTF-8 and da_DK.ISO-8859-1 and
ensures they sort one digraph each correctly. The optimization can't be
applied without regressing this test.
Checked on x86_64, bug-strcoll2.c fails without this patch and passes
after. This will also get a fix on 2.22 which has the same bug.
The dbl-64, ldbl-96 and ldbl-128 implementations of lround and llround
fail to produce "invalid" exceptions in cases where the rounded result
overflows the target type, but truncating the floating-point argument
to the next integer towards zero does not overflow it (so in
particular casts do not produce such exceptions). (This issue cannot
arise for float, or for double with 64-bit target type, or for ldbl-96
with 64-bit target type and negative arguments, because of
insufficient precision in the floating-point type for arguments with
the relevant property to exist.)
This patch fixes these problems by inserting checks for the special
cases that can occur in each implementation, and explicitly raising
FE_INVALID (and avoiding the cast if it might raise spurious
FE_INEXACT).
Tested for x86_64, x86 and mips64.
[BZ #19088]
* sysdeps/ieee754/dbl-64/s_lround.c: Include <fenv.h> and
<limits.h>.
(__lround) [FE_INVALID]: Force FE_INVALID exception when result
overflows but exception would not result from cast.
* sysdeps/ieee754/dbl-64/wordsize-64/s_lround.c: Include <fenv.h>
and <limits.h>.
(__lround) [FE_INVALID]: Force FE_INVALID exception when result
overflows but exception would not result from cast.
* sysdeps/ieee754/ldbl-128/s_llroundl.c: Include <fenv.h> and
<limits.h>.
(__llroundl) [FE_INVALID]: Force FE_INVALID exception when result
overflows but exception would not result from cast.
* sysdeps/ieee754/ldbl-128/s_lroundl.c: Include <fenv.h> and
<limits.h>.
(__lroundl) [FE_INVALID]: Force FE_INVALID exception when result
overflows but exception would not result from cast.
* sysdeps/ieee754/ldbl-96/s_llroundl.c: Include <fenv.h> and
<limits.h>.
(__llroundl) [FE_INVALID]: Force FE_INVALID exception when result
overflows but exception would not result from cast.
* sysdeps/ieee754/ldbl-96/s_lroundl.c: Include <fenv.h> and
<limits.h>.
(__lroundl) [FE_INVALID]: Force FE_INVALID exception when result
overflows but exception would not result from cast.
* math/libm-test.inc (lround_test_data): Add more tests.
(llround_test_data): Likewise.
The ldbl-128 implementations of lrintl and lroundl miss "invalid"
exceptions on systems with 32-bit long for arguments that overflow
long but have exponent below 48. This patch fixes this by rearranging
the sequence of tests in the code so the exponent < 48 case is only
used for exponents that don't overflow long.
Tested for mips64 (n32 and n64).
[BZ #19085]
* sysdeps/ieee754/ldbl-128/s_lrintl.c (__lrintl): Move test for
exponent below 48 inside case for non-overflowing exponent.
* sysdeps/ieee754/ldbl-128/s_lroundl.c (__lroundl): Likewise.
The implementation of lround in dbl-64/wordsize-64 as an alias or
wrapper for llround is always incorrect when long is not 64-bit,
because it misses required exceptions in overflow cases, as shown by
my recently added tests. This patch removes that alias / wrapper in
the non-LP64 case, together with the REGISTER_CAST_INT32_TO_INT64
macro, restoring the previous version of lround for dbl-64/wordsize-64
(newly conditioned on !_LP64).
Tested for x86_64, and for mips64 with use of dbl-64/wordsize-64
enabled.
[BZ #19079]
* sysdeps/ieee754/dbl-64/wordsize-64/s_lround.c: Restore previous
file, conditioned on [!_LP64].
* sysdeps/ieee754/dbl-64/wordsize-64/s_llround.c
[!_LP64] (__lround): Do not define as function or alias.
[!_LP64] (lround): Likewise.
[!_LP64] (__lroundl): Likewise.
[!_LP64] (lroundl): Likewise.
* sysdeps/tile/sysdep.h (REGISTER_CAST_INT32_TO_INT64): Remove
macro.
* sysdeps/x86_64/x32/sysdep.h (REGISTER_CAST_INT32_TO_INT64):
Likewise.
The ldbl-128ibm expl wrapper checks the argument to determine when to
call __kernel_standard_l, thereby overriding overflowing results from
__ieee754_expl that could otherwise (given appropriately patched
libgcc) be correct for the rounding mode. This patch changes it to
check the result of __ieee754_expl instead, as other versions of this
wrapper do.
Tested for powerpc.
[BZ #19078]
* sysdeps/ieee754/ldbl-128ibm/w_expl.c (o_thres): Remove variable.
(u_thres): Likewise.
(__expl): Determine whether to call __kernel_standard_l based on
value of result, not argument.
The ldbl-128ibm implementation of logl produces a zero with the wrong
sign for logl (1) in FE_DOWNWARD mode. This patch makes it explicitly
return 0.0L in that case, as in e.g. the ldbl-128 implementation.
Tested for powerpc.
[BZ #19077]
* sysdeps/ieee754/ldbl-128ibm/e_logl.c (__ieee754_logl): Return
0.0L for argument 1.0L.
The ldbl-128ibm implementation of log1pl produces an infinity with the
wrong sign for log1pl (-1) in FE_DOWNWARD mode. This patch fixes this
by changing a division (-1.0L / (x - x)) (incorrect in FE_DOWNWARD
mode) to (-1.0L / 0.0L) (correct in all rounding modes).
Tested for powerpc.
[BZ #19076]
* sysdeps/ieee754/ldbl-128ibm/s_log1pl.c (__log1pl): Divide by
constant 0.0L when computing infinite result.
The ldbl-96 version of lroundl is incorrect for systems with 64-bit
long when the argument's absolute value is just below a power of 2,
2^32 or more, and rounds up to the next integer; in such cases, it
returns 0. The problem is incrementing the high part of the mantissa
loses the high bit of the value (which is not an issue for any other
floating-point format, and is handled specially in lround when the bit
corresponding to 0.5 was in the high part rather than the low part).
This patch fixes this in a similar way to that used in llroundl:
storing the high part in an unsigned long variable before incrementing
it, so problems cannot occur in the case when this code is reachable.
I improved test coverage for both lround and llround by making them
use the same test inputs (appropriately conditioned on the size of
long in the lround case) - complete with the same comments, to make
comparison as easy as possible. (This test coverage improvement was
how I found the lroundl bug.)
Tested for x86_64 and x86.
[BZ #19071]
* sysdeps/ieee754/ldbl-96/s_lroundl.c (__lroundl): Use unsigned
long int variable to store possibly incremented high part of
mantissa.
* math/libm-test.inc (lround_test_data): Add tests used for
llround. Use [LONG_MAX > 0x7fffffff] consistently as condition
for tests requiring 64-bit long. Do not condition tests on
[TEST_FLOAT] unnecessarily.
(llround_test_data): Add tests used for lround. Add another
expectation for the "inexact" exception. Do not condition tests
on [TEST_FLOAT] unnecessarily.
On powerpc32 hard-float, older processors (ones where fcfid is not
available for 32-bit code), GCC generates conversions from integers to
floating point that wrongly convert integer 0 to -0 instead of +0 in
FE_DOWNWARD mode. This in turn results in logb and a few other
functions wrongly returning -0 when they should return +0.
This patch works around this issue in glibc as I proposed in
<https://sourceware.org/ml/libc-alpha/2015-09/msg00728.html>, so that
the affected functions can be correct and the affected tests pass in
the absence of a GCC fix for this longstanding issue (GCC bug 67771 -
if fixed, of course we can put in GCC version conditionals, and
eventually phase out the workarounds). A new macro
FIX_INT_FP_CONVERT_ZERO is added in a new sysdeps header
fix-int-fp-convert-zero.h, and the powerpc32/fpu version of that
header defines the macro based on the results of a configure test for
whether such conversions use the fcfid instruction.
Tested for x86_64 (that installed stripped shared libraries are
unchanged by the patch) and powerpc (that HAVE_PPC_FCFID comes out to
0 as expected and that the relevant tests are fixed). Also tested a
build with GCC configured for -mcpu=power4 and verified that
HAVE_PPC_FCFID comes out to 1 in that case.
There are still some other issues to fix to get test-float and
test-double passing cleanly for older powerpc32 processors (apart from
the need for an ulps regeneration for powerpc). (test-ldouble will be
harder to get passing cleanly, but with a combination of selected
fixes to ldbl-128ibm code that don't involve significant performance
issues, allowing spurious underflow and inexact exceptions for that
format, and lots of XFAILing for the default case of unpatched libgcc,
it should be doable.)
[BZ #887]
[BZ #19049]
[BZ #19050]
* sysdeps/generic/fix-int-fp-convert-zero.h: New file.
* sysdeps/ieee754/dbl-64/e_log10.c: Include
<fix-int-fp-convert-zero.h>.
(__ieee754_log10): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
* sysdeps/ieee754/dbl-64/e_log2.c: Include
<fix-int-fp-convert-zero.h>.
(__ieee754_log2): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
* sysdeps/ieee754/dbl-64/s_erf.c: Include
<fix-int-fp-convert-zero.h>.
(__erfc): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
* sysdeps/ieee754/dbl-64/s_logb.c: Include
<fix-int-fp-convert-zero.h>.
(__logb): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
* sysdeps/ieee754/flt-32/e_log10f.c: Include
<fix-int-fp-convert-zero.h>.
(__ieee754_log10f): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
* sysdeps/ieee754/flt-32/e_log2f.c: Include
<fix-int-fp-convert-zero.h>.
(__ieee754_log2f): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
* sysdeps/ieee754/flt-32/s_erff.c: Include
<fix-int-fp-convert-zero.h>.
(__erfcf): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
* sysdeps/ieee754/flt-32/s_logbf.c: Include
<fix-int-fp-convert-zero.h>.
(__logbf): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
* sysdeps/ieee754/ldbl-128ibm/s_erfl.c: Include
<fix-int-fp-convert-zero.h>.
(__erfcl): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
* sysdeps/ieee754/ldbl-128ibm/s_logbl.c: Include
<fix-int-fp-convert-zero.h>.
(__logbl): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
* sysdeps/powerpc/powerpc32/fpu/configure.ac: New file.
* sysdeps/powerpc/powerpc32/fpu/configure: New generated file.
* sysdeps/powerpc/powerpc32/fpu/fix-int-fp-convert-zero.h: New
file.
* config.h.in [_LIBC] (HAVE_PPC_FCFID): New macro.
ISO C requires overflowing results from nexttoward to be the
appropriate infinity independent of the rounding mode, but some
implementations use a rounding-mode-dependent result (this is the same
issue as was fixed for nextafter in bug 16677). This patch fixes the
problem by making the nexttoward implementations discard the result
from the floating-point computation that forced an overflow exception
and then return the infinity previously computed with integer
arithmetic.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #19059]
* math/s_nexttowardf.c (__nexttowardf): Do not return value from
overflowing computation.
* sysdeps/i386/fpu/s_nexttoward.c (__nexttoward): Likewise.
* sysdeps/i386/fpu/s_nexttowardf.c (__nexttowardf): Likewise.
* sysdeps/ieee754/ldbl-128/s_nexttoward.c (__nexttoward):
Likewise.
* sysdeps/ieee754/ldbl-128/s_nexttowardf.c (__nexttowardf):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_nexttoward.c (__nexttoward):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_nexttowardf.c (__nexttowardf):
Likewise.
* sysdeps/ieee754/ldbl-96/s_nexttoward.c (__nexttoward): Likewise.
* sysdeps/ieee754/ldbl-96/s_nexttowardf.c (__nexttowardf):
Likewise.
* sysdeps/ieee754/ldbl-opt/s_nexttowardfd.c (__nldbl_nexttowardf):
Likewise.
* math/libm-test.inc (nexttoward_test_data): Add more tests.
This prevents injection of ':' and '\n' into output functions which
use the NSS files database syntax. Critical fields (user/group names
and file system paths) are checked strictly. For backwards
compatibility, the GECOS field is rewritten instead.
The getent program is adjusted to use the put*ent functions in libc,
instead of local copies. This changes the behavior of getent if user
names start with '-' or '+'.
The ldbl-128 / ldbl-128ibm implementation of lgamma has problems with
its handling of large arguments. It has an overflow threshold that is
correct only for ldbl-128, despite being used for both types - with
diagnostic control macros as a temporary measure to disable warnings
about that constant overflowing for ldbl-128ibm - and it has a
calculation that's roughly x * log(x) - x, resulting in overflows for
arguments that are roughly at most a factor 1/log(threshold) below the
overflow threshold.
This patch fixes both issues, using an overflow threshold appropriate
for the type in question and adding another case for large arguments
that avoids the possible intermediate overflow.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #16347]
[BZ #19046]
* sysdeps/ieee754/ldbl-128/e_lgammal_r.c: Do not include
<libc-internal.h>.
(MAXLGM): Do not use diagnostic control macros.
[LDBL_MANT_DIG == 106] (MAXLGM): Change value to overflow
threshold for ldbl-128ibm.
(__ieee754_lgammal_r): For large arguments, multiply by log - 1
instead of multiplying by log then subtracting.
* math/auto-libm-test-in: Add more tests of lgamma.
* math/auto-libm-test-out: Regenerated.
The ldbl-128ibm implementation of exp10l uses a version of log(10)
split into high and low parts - but the low part is negative, so
causing spurious overflows from __ieee754_expl (exp_high) in cases
close to the overflow threshold (I added relevant tests close to the
overflow threshold to the testsuite earlier today). The same issue
applies close to the underflow threshold as well (except that spurious
underflows in IBM long double arithmetic are harder to fix than the
other deficiencies, so we might end up permitting those for IBM long
double in the libm testsuite, as permitted by ISO C).
This patch fixes it to use a low part rounded downward to 48 bits
instead. (The choice of 48 instead of 53 bits is to make it more
obviously safe even when the low part of the argument is negative.)
Tested for powerpc. (Note that because of libgcc bugs with
multiplication very close to LDBL_MAX, libgcc also needs patching for
all the problem cases to be fixed, but this patch is still safe and
correct in the absence of such libgcc fixes.)
[BZ #16620]
* sysdeps/ieee754/ldbl-128ibm/e_exp10l.c (log10_high): Use value
of log (10) rounded downward to 48 bits.
(log10_low): Use corresponding low part of log (10).
The i386 versions of acoshf and acosh raise a spurious "invalid"
exception for an argument that is a quiet NaN with the sign bit set.
The integer arithmetic to detect arguments < 1 also detects -NaN, and
then the computation 0 / 0 in that case raises the exception. This
patch fixes this by using (x - x) / (x - x) as the computation in that
case instead, which will always raise the exception for non-NaN
arguments reaching that code, but not for quiet NaN arguments.
Tested for x86_64 and x86.
[BZ #19032]
* sysdeps/i386/fpu/e_acosh.S (__ieee754_acosh): For arguments < 1,
compute result as (x - x) / (x - x) not as 0 / 0.
* sysdeps/i386/fpu/e_acoshf.S (__ieee754_acoshf): Likewise.
* math/libm-test.inc (acosh_test_data): Add another test of acosh.
For arguments with X^2 + Y^2 close to 1, clog and clog10 avoid large
errors from log(hypot) by computing X^2 + Y^2 - 1 in a way that avoids
cancellation error and then using log1p.
However, the thresholds for using that approach still result in log
being used on argument as large as sqrt(13/16) > 0.9, leading to
significant errors, in some cases above the 9ulp maximum allowed in
glibc libm. This patch arranges for the approach using log1p to be
used in any cases where |X|, |Y| < 1 and X^2 + Y^2 >= 0.5 (with the
existing allowance for cases where one of X and Y is very small),
adjusting the __x2y2m1 functions to work with the wider range of
inputs. This way, log only gets used on arguments below sqrt(1/2) (or
substantially above 1), where the error involved is much less.
Tested for x86_64, x86, mips64 and powerpc. For the ulps regeneration
I removed the existing clog and clog10 ulps before regenerating to
allow any reduced ulps to appear. Tests added include those found by
random test generation to produce large ulps either before or after
the patch, and some found by trying inputs close to the (0.75, 0.5)
threshold where the potential errors from using log are largest.
[BZ #19016]
* sysdeps/generic/math_private.h (__x2y2m1f): Update comment to
allow more cases with X^2 + Y^2 >= 0.5.
* sysdeps/ieee754/dbl-64/x2y2m1.c (__x2y2m1): Likewise. Add -1 as
normal element in sum instead of special-casing based on values of
arguments.
* sysdeps/ieee754/dbl-64/x2y2m1f.c (__x2y2m1f): Update comment.
* sysdeps/ieee754/ldbl-128/x2y2m1l.c (__x2y2m1l): Likewise. Add
-1 as normal element in sum instead of special-casing based on
values of arguments.
* sysdeps/ieee754/ldbl-128ibm/x2y2m1l.c (__x2y2m1l): Likewise.
* sysdeps/ieee754/ldbl-96/x2y2m1.c [FLT_EVAL_METHOD != 0]
(__x2y2m1): Update comment.
* sysdeps/ieee754/ldbl-96/x2y2m1l.c (__x2y2m1l): Likewise. Add -1
as normal element in sum instead of special-casing based on values
of arguments.
* math/s_clog.c (__clog): Handle more cases using log1p without
hypot.
* math/s_clog10.c (__clog10): Likewise.
* math/s_clog10f.c (__clog10f): Likewise.
* math/s_clog10l.c (__clog10l): Likewise.
* math/s_clogf.c (__clogf): Likewise.
* math/s_clogl.c (__clogl): Likewise.
* math/auto-libm-test-in: Add more tests of clog and clog10.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
The flt-32 version of powf can be inaccurate because of bugs in the
extra-precision calculation of (x-1)/(x+1) or (x-1.5)/(x+1.5) as part
of calculating log(x) with extra precision: a constant used (as part
of adding 1 or 1.5 through integer arithmetic) is incorrect, and then
the code fails to mask a computed high part before using it in
arithmetic that relies on s_h*t_h being exactly representable. This
patch fixes these bugs.
Tested for x86_64 and x86. x86_64 ulps for powf removed and
regenerated to reflect reduced ulps from the increased accuracy for
existing tests.
[BZ #18956]
* sysdeps/ieee754/flt-32/e_powf.c (__ieee754_powf): Add 0x00400000
not 0x0040000 for high bit of mantissa. Mask with 0xfffff000 when
extracting high part.
* math/auto-libm-test-in: Add another test of pow.
* math/auto-libm-test-out: Regenerated.
* sysdeps/x86_64/fpu/libm-test-ulps: Update.
Similar to various other bugs in this area, pow functions can fail to
raise the underflow exception when the result is tiny and inexact but
one or more low bits of the intermediate result that is scaled down
(or, in the i386 case, converted from a wider evaluation format) are
zero. This patch forces the exception in a similar way to previous
fixes, thereby concluding the fixes for known bugs with missing
underflow exceptions currently filed in Bugzilla.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #18825]
* sysdeps/i386/fpu/i386-math-asm.h (FLT_NARROW_EVAL_UFLOW_NONNAN):
New macro.
(DBL_NARROW_EVAL_UFLOW_NONNAN): Likewise.
(LDBL_CHECK_FORCE_UFLOW_NONNAN): Likewise.
* sysdeps/i386/fpu/e_pow.S: Use DEFINE_DBL_MIN.
(__ieee754_pow): Use DBL_NARROW_EVAL_UFLOW_NONNAN instead of
DBL_NARROW_EVAL, reloading the PIC register as needed.
* sysdeps/i386/fpu/e_powf.S: Use DEFINE_FLT_MIN.
(__ieee754_powf): Use FLT_NARROW_EVAL_UFLOW_NONNAN instead of
FLT_NARROW_EVAL. Use separate return path for case when first
argument is NaN.
* sysdeps/i386/fpu/e_powl.S: Include <i386-math-asm.h>. Use
DEFINE_LDBL_MIN.
(__ieee754_powl): Use LDBL_CHECK_FORCE_UFLOW_NONNAN, reloading the
PIC register.
* sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Use
math_check_force_underflow_nonneg.
* sysdeps/ieee754/flt-32/e_powf.c (__ieee754_powf): Force
underflow for subnormal result.
* sysdeps/ieee754/ldbl-128/e_powl.c (__ieee754_powl): Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_powl.c (__ieee754_powl): Use
math_check_force_underflow_nonneg.
* sysdeps/x86/fpu/powl_helper.c (__powl_helper): Use
math_check_force_underflow.
* sysdeps/x86_64/fpu/x86_64-math-asm.h
(LDBL_CHECK_FORCE_UFLOW_NONNAN): New macro.
* sysdeps/x86_64/fpu/e_powl.S: Include <x86_64-math-asm.h>. Use
DEFINE_LDBL_MIN.
(__ieee754_powl): Use LDBL_CHECK_FORCE_UFLOW_NONNAN.
* math/auto-libm-test-in: Add more tests of pow.
* math/auto-libm-test-out: Regenerated.
Fix a regression introduced with commit 0d23a5c1 [Static dlopen
correction fallout fixes] that caused the default library search path to
be ignored for modules loaded with dlopen from static executables.
[BZ #17250]
* elf/dl-support.c (_dl_main_map): Don't initialize l_flags_1
member.
Similar to various other bugs in this area, hypot functions can fail
to raise the underflow exception when the result is tiny and inexact
but one or more low bits of the intermediate result that is scaled
down (or, in the i386 case, converted from a wider evaluation format)
are zero. This patch forces the exception in a similar way to
previous fixes.
Note that this issue cannot arise for implementations of hypotf using
double (or wider) for intermediate evaluation (if hypotf should
underflow, that means the double square root is being computed of some
number of the form N*2^-298, for 0 < N < 2^46, which is exactly
represented as a double, and whatever the rounding mode such a square
root cannot have a mantissa with all zeroes after the initial 23
bits). Thus no changes are made to hypotf implementations in this
patch, only to hypot and hypotl.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #18803]
* sysdeps/i386/fpu/e_hypot.S: Use DEFINE_DBL_MIN.
(MO): New macro.
(__ieee754_hypot) [PIC]: Load PIC register.
(__ieee754_hypot): Use DBL_NARROW_EVAL_UFLOW_NONNEG instead of
DBL_NARROW_EVAL.
* sysdeps/ieee754/dbl-64/e_hypot.c (__ieee754_hypot): Use
math_check_force_underflow_nonneg in case where result might be
tiny.
* sysdeps/ieee754/ldbl-128/e_hypotl.c (__ieee754_hypotl):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_hypotl.c (__ieee754_hypotl):
Likewise.
* sysdeps/ieee754/ldbl-96/e_hypotl.c (__ieee754_hypotl): Likewise.
* sysdeps/powerpc/fpu/e_hypot.c (__ieee754_hypot): Likewise.
* math/auto-libm-test-in: Add more tests of hypot.
* math/auto-libm-test-out: Regenerated.
The x86_64 fma4 version of pow fails to disable contraction of
operations other than those explicitly intended to use fma
instructions, so resulting in large ulps errors on processors with
fma4 instructions, as in bug 18104 (165ulp for the test added for that
bug; error originally reported by "blaaa" on #glibc). This patch adds
$(config-cflags-nofma) for e_pow-fma4.c, corresponding to the use for
e_pow.c in sysdeps/ieee754/dbl-64/Makefile.
Tested for x86_64 on a processor with fma4.
[BZ #19003]
* sysdeps/x86_64/fpu/multiarch/Makefile (CFLAGS-e_pow-fma4.c): Add
$(config-cflags-nofma).
i386 exp, hypot and pow functions can return overflowing and
underflowing values with excess range and precision; ; Wilco
Dijkstra's patches to make isfinite etc. expand inline cause this
pre-existing issue to result in test failures.
This patch fixes those functions to avoid excess range and precision
in their return values. Appropriate macros are added for the repeated
code sequences; in future I'll add more such macros and refactor
existing code forcing underflow (with or without also eliminating
excess range and precision from the return value) to use such macros.
Tested for x86. If, after this patch, you still see x86 libm test
failures with excess range or precision, please file bugs in Bugzilla.
[BZ #18980]
* sysdeps/i386/fpu/i386-math-asm.h (DEFINE_FLT_MIN): New macro.
(DEFINE_DBL_MIN): Likewise.
(FLT_NARROW_EVAL_UFLOW_NONNEG_NAN): Likewise.
(DBL_NARROW_EVAL_UFLOW_NONNEG_NAN): Likewise.
(FLT_NARROW_EVAL_UFLOW_NONNEG): Likewise.
(DBL_NARROW_EVAL_UFLOW_NONNEG): Likewise.
* sysdeps/i386/fpu/e_exp.S: Include <i386-math-asm.h>.
(dbl_min): Replace with use of DEFINE_DBL_MIN.
(__ieee754_exp): Use DBL_NARROW_EVAL_UFLOW_NONNEG_NAN.
(__exp_finite): Use DBL_NARROW_EVAL_UFLOW_NONNEG.
* sysdeps/i386/fpu/e_exp10.S: Include <i386-math-asm.h>.
(dbl_min): Replace with use of DEFINE_DBL_MIN.
(__ieee754_exp10): Use DBL_NARROW_EVAL_UFLOW_NONNEG_NAN.
* sysdeps/i386/fpu/e_exp10f.S: Include <i386-math-asm.h>.
(flt_min): Replace with use of DEFINE_FLT_MIN.
(__ieee754_exp10f): Use FLT_NARROW_EVAL_UFLOW_NONNEG_NAN.
* sysdeps/i386/fpu/e_exp2.S: Include <i386-math-asm.h>.
(dbl_min): Replace with use of DEFINE_DBL_MIN.
(__ieee754_exp2): Use DBL_NARROW_EVAL_UFLOW_NONNEG_NAN.
* sysdeps/i386/fpu/e_exp2f.S: Include <i386-math-asm.h>.
(flt_min): Replace with use of DEFINE_FLT_MIN.
(__ieee754_exp2f): Use FLT_NARROW_EVAL_UFLOW_NONNEG_NAN.
* sysdeps/i386/fpu/e_expf.S: Include <i386-math-asm.h>.
(flt_min): Replace with use of DEFINE_FLT_MIN.
(__ieee754_expf): Use FLT_NARROW_EVAL_UFLOW_NONNEG_NAN.
(__expf_finite): Use FLT_NARROW_EVAL_UFLOW_NONNEG.
* sysdeps/i386/fpu/e_hypot.S: Include <i386-math-asm.h>.
(__ieee754_hypot): Use DBL_NARROW_EVAL.
* sysdeps/i386/fpu/e_hypotf.S: Include <i386-math-asm.h>.
(__ieee754_hypotf): Use FLT_NARROW_EVAL.
* sysdeps/i386/fpu/e_pow.S: Include <i386-math-asm.h>.
(__ieee754_pow): Use DBL_NARROW_EVAL.
* sysdeps/i386/fpu/e_powf.S: Include <i386-math-asm.h>.
(__ieee754_powf): Use FLT_NARROW_EVAL.
* sysdeps/i386/i686/fpu/multiarch/e_expf-sse2.S
(__ieee754_expf_sse2): Convert double-precision result to single
precision.
* sysdeps/i386/fpu/libm-test-ulps: Update.
i386 scalb / scalbn / scalbln (and thus ldexp) functions for float and
double can return results with excess range (and consequently excess
precision for subnormal results). As the results of these functions
are fully determined by reference to IEEE 754 operations, this is
unambiguously a bug, apart from the testsuite failures it causes.
This patch makes those functions store their results on the stack and
load them back to eliminate the excess range. Double rounding is not
a problem, as the only cases where it could occur are when the result
overflows or underflows for extended precision, and then the
double-rounded results are the same as the single-rounded results.
The new macros will be used for more functions, more such macros
added, and existing code refactored to use such macros, in subsequent
patches.
Tested for x86. Committed.
[BZ #18981]
* sysdeps/i386/fpu/i386-math-asm.h: New file.
* sysdeps/i386/fpu/e_scalb.S: Include <i386-math-asm.h>.
(__ieee754_scalb): Use DBL_NARROW_EVAL.
* sysdeps/i386/fpu/e_scalbf.S: Include <i386-math-asm.h>.
(__ieee754_scalbf): Use FLT_NARROW_EVAL.
* sysdeps/i386/fpu/s_scalbn.S: Include <i386-math-asm.h>.
(__scalbn): Use DBL_NARROW_EVAL.
* sysdeps/i386/fpu/s_scalbnf.S: Include <i386-math-asm.h>.
(__scalbnf): Use FLT_NARROW_EVAL.
built-ins when available. Since going through the PLT is expensive for these small functions,
inlining results in major speedups (about 7x on Cortex-A57 for isinf). The GCC built-ins are not
correct if signalling NaN support is required, and thus are turned off in that case (see GCC bug
66462). The test-snan.c tests sNaNs and so must be explicitly built with -fsignaling-nans.
2015-09-18 Wilco Dijkstra <wdijkstr@arm.com>
[BZ #15367]
[BZ #17441]
* math/Makefile: Build test-snan.c with -fsignaling-nans.
* math/math.h (fpclassify): Use __builtin_fpclassify when
available. (signbit): Use __builtin_signbit(f/l).
(isfinite): Use__builtin_isfinite. (isnormal): Use
__builtin_isnormal. (isnan): Use __builtin_isnan.
(isinf): Use __builtin_isinf_sign.
In ISO 8601, +03:30 is a valid time zone. Currently, strptime() only
parses it as a 2-digit time zone an believes this is +03:00. This change
makes it accept a single colon.
C99/C11 Annex G specifies the sign of the zero part of the result of
ctan (x +/- i * Inf) and ctanh (+/-Inf + i * y). This patch fixes glibc
to follow that specification, along the lines I described in my review
of Andreas's previous patch for this issue
<https://sourceware.org/ml/libc-alpha/2014-08/msg00142.html>.
Tested for x86_64.
2015-09-17 Joseph Myers <joseph@codesourcery.com>
Andreas Schwab <schwab@suse.de>
[BZ #17118]
* math/s_ctan.c (__ctan): Determine sign of zero real part of
result when imaginary part of argument is infinite using sine and
cosine.
* math/s_ctanf.c (__ctanf): Likewise.
* math/s_ctanl.c (__ctanl): Likewise.
* math/s_ctanh.c (__ctanh): Determine sign of zero imaginary part
of result when real part of argument is infinite using sine and
cosine.
* math/s_ctanhf.c (__ctanhf): Likewise.
* math/s_ctanhl.c (__ctanhl): Likewise.
* math/libm-test.inc (ctan_test_data): Add more tests of ctan.
(ctanh_test_data): Add more tests of ctanh.
Bug 15384 notes that in __finite, two different constants are used
that could be the same constant (the result only depends on the
exponent of the floating-point representation), and that using the
same constant is better for architectures where constants need loading
from a constant pool. This patch implements that change.
Tested for x86_64, mips64 and powerpc.
[BZ #15384]
* sysdeps/ieee754/dbl-64/s_finite.c (FINITE): Use same constant as
bit-mask as in subtraction.
* sysdeps/ieee754/dbl-64/wordsize-64/s_finite.c (__finite):
Likewise.
* sysdeps/ieee754/flt-32/s_finitef.c (FINITEF): Likewise.
* sysdeps/ieee754/ldbl-128/s_finitel.c (__finitel): Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_finitel.c (__finitel): Likewise.
Similar to various other bugs in this area, tgamma functions can fail
to raise the underflow exception when the result is tiny and inexact
but one or more low bits of the intermediate result that is scaled
down are zero. This patch forces the exception in a similar way to
previous fixes.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #18951]
* sysdeps/ieee754/dbl-64/e_gamma_r.c (__ieee754_gamma_r): Force
underflow exception for small results.
* sysdeps/ieee754/flt-32/e_gammaf_r.c (__ieee754_gammaf_r):
Likewise.
* sysdeps/ieee754/ldbl-128/e_gammal_r.c (__ieee754_gammal_r):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_gammal_r.c (__ieee754_gammal_r):
Likewise.
* sysdeps/ieee754/ldbl-96/e_gammal_r.c (__ieee754_gammal_r):
Likewise.
* math/auto-libm-test-in: Add more tests of tgamma.
* math/auto-libm-test-out: Regenerated.
As noted in bug 6803, scalbn fails to set errno on overflow and
underflow. This patch fixes this by making scalbn an alias of ldexp,
which has exactly the same semantics (for floating-point types with
radix 2) and already has wrappers that deal with setting errno,
instead of an alias of the internal __scalbn (which ldexp calls).
Notes:
* Where compat symbols were defined for scalbn functions, I didn't
change what they point to (to keep the patch minimal), so such
compat symbols continue to go directly to the non-errno-setting
functions.
* Mike, I didn't do anything with the IA64 versions of these
functions, where I think both the ldexp and scalbn functions already
deal with setting errno. As a cleanup (not needed to fix this bug)
however you might want to make those functions into aliases for
IA64; there is no need for them to be separate function
implementations at all.
* This concludes the fix for bug 6803 since the scalb and scalbln
cases of that bug were fixed some time ago.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #6803]
* math/s_ldexp.c (scalbn): Define as weak alias of __ldexp.
[NO_LONG_DOUBLE] (scalbnl): Define as weak alias of __ldexp.
* math/s_ldexpf.c (scalbnf): Define as weak alias of __ldexpf.
* math/s_ldexpl.c (scalbnl): Define as weak alias of __ldexpl.
* sysdeps/i386/fpu/s_scalbn.S (scalbn): Remove alias.
* sysdeps/i386/fpu/s_scalbnf.S (scalbnf): Likewise.
* sysdeps/i386/fpu/s_scalbnl.S (scalbnl): Likewise.
* sysdeps/ieee754/dbl-64/s_scalbn.c (scalbn): Likewise.
[NO_LONG_DOUBLE] (scalbnl): Likewise.
* sysdeps/ieee754/dbl-64/wordsize-64/s_scalbn.c (scalbn):
Likewise.
[NO_LONG_DOUBLE] (scalbnl): Likewise.
* sysdeps/ieee754/flt-32/s_scalbnf.c (scalbnf): Likewise.
* sysdeps/ieee754/ldbl-128/s_scalbnl.c (scalbnl): Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_scalbnl.c (scalbnl): Remove
long_double_symbol calls.
* sysdeps/ieee754/ldbl-64-128/s_scalbnl.c (scalbnl): Likewise.
* sysdeps/ieee754/ldbl-opt/s_ldexpl.c (__ldexpl_2): Define as
strong alias of __ldexpl.
(scalbnl): Define using long_double_symbol.
* sysdeps/m68k/m680x0/fpu/s_scalbn.c (__CONCATX(scalbn,suffix)):
Remove alias.
* sysdeps/sparc/sparc64/soft-fp/s_scalbnl.c (scalbnl): Likewise.
* sysdeps/x86_64/fpu/s_scalbnl.S (scalbnl): Likewise.
* math/libm-test.inc (scalbn_test_data): Add errno expectations.
(scalbln_test_data): Add more errno expectations.
The ldbl-128 and ldbl-128ibm expm1l implementations have code to
handle +Inf and finite arguments above an overflow threshold. Since
they now use __expl for large positive arguments to fix other
problems, this code is unreachable; this patch removes it.
Tested for mips64 and powerpc.
[BZ #16415]
* sysdeps/ieee754/ldbl-128/s_expm1l.c (maxlog): Remove variable.
(__expm1l): Remove code to handle positive infinity and overflow.
* sysdeps/ieee754/ldbl-128ibm/s_expm1l.c (maxlog): Remove
variable.
(__expm1l): Remove code to handle positive infinity and overflow.
math.h incorrectly declares various functions for XSI POSIX 2001 and
2008 editions. gamma was removed in the 2001 edition but is still
declared, along with gammaf and gammal which were never standard
functions. isnan is still declared as a function, along with isnanf
and isnanl which were never standard functions, although in 2001 the
function was replaced by the type-generic macro. scalbf and scalbl
are declared although never standard, and scalb was removed in the
2008 edition but is still declared. The scalb type-generic macro in
tgmath.h shouldn't be present for any POSIX version, since POSIX never
had such a type-generic macro.
This patch disables all those declarations in the relevant cases (as a
minimal fix, it leaves them enabled for __USE_MISC). For the matter
of declaring scalb but not scalbf or scalbl for the 2001 edition, a
new macro __MATH_DECLARING_DOUBLE is added, defined by math.h around
includes of bits/mathcalls.h, for bits/mathcalls.h to use to test
which type's functions are being declared.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
[BZ #18967]
* math/math.h (__MATH_DECLARING_DOUBLE): New macro. Define and
undefine around includes of <bits/mathcalls.h>.
* math/bits/mathcalls.h [!__USE_MISC && __USE_XOPEN2K] (isnan): Do
not declare function.
[!__USE_MISC && __USE_XOPEN2K] (gamma): Likewise.
[!__USE_MISC && (!__MATH_DECLARING_DOUBLE || __USE_XOPEN2K8)]
(scalb): Likewise.
* math/tgmath.h [!__USE_MISC && __USE_XOPEN_EXTENDED] (scalb): Do
not define macro.
* conform/Makefile (test-xfail-XOPEN2K/math.h/conform): Remove
variable.
(test-xfail-XOPEN2K/tgmath.h/conform): Likewise.
(test-xfail-XOPEN2K8/math.h/conform): Likewise.
(test-xfail-XOPEN2K8/tgmath.h/conform): Likewise.
The ldbl-128ibm implementation of nearbyintl wrongly uses signaling
comparisons such as "if (fabs (u.d[0].d) < TWO52)" on arguments that
might be NaNs, when "invalid" exceptions should not be raised. (For
hard float, this issue may be hidden by
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58684>, powerpc GCC
wrongly only using unordered comparison instructions.) This patch
fixes this by just returning the argument if it is not finite (because
of the arbitrary value of the low part of a NaN in IBM long double,
there are quite a lot of comparisons that could end up involving a NaN
when the argument to nearbyintl is a NaN, so excluding NaN arguments
at the start is the simplest and safest fix).
Tested for powerpc-nofpu, where it removes failures for spurious
"invalid" exceptions from nearbyintl.
[BZ #18857]
* sysdeps/ieee754/ldbl-128ibm/s_nearbyintl.c (__nearbyintl): Just
return non-finite argument without doing ordered comparisons on
it.
Bug 16296 notes that fegetround is a pure function and should be
marked as such in fenv.h. This patch implements that.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by this patch).
[BZ #16296]
* math/fenv.h (fegetround): Use __attribute_pure__.
* include/fenv.h (__fegetround): Likewise.
Similar to various other bugs in this area, ctan and ctanh can fail to
raise the underflow exception for some cases of results that are tiny
and inexact. This patch forces the exception in a similar way to
previous fixes.
Tested for x86_64 and x86.
[BZ #18595]
* math/s_ctan.c (__ctan): Force underflow exception for results
whose real or imaginary part has small absolute value.
* math/s_ctanf.c (__ctanf): Likewise.
* math/s_ctanh.c (__ctanh): Likewise.
* math/s_ctanhf.c (__ctanhf): Likewise.
* math/s_ctanhl.c (__ctanhl): Likewise.
* math/s_ctanl.c (__ctanl): Likewise.
* math/auto-libm-test-in: Do not allow missing underflow for ctan
and ctanh. Add more tests of ctan and ctanh.
Bug 15918 points out that the handling of infinities in hypotf can be
simplified: it's enough to return the absolute value of the infinite
argument without first comparing it to the other argument and possibly
returning that other argument's absolute value. This patch makes that
cleanup (which should not change how hypotf behaves on any input).
Tested for x86_64.
[BZ #15918]
* sysdeps/ieee754/flt-32/e_hypotf.c (__ieee754_hypotf): Simplify
handling of cases where one argument is an infinity.
On i386, the double version of exp10 can miss underflow exceptions if
the result is in the subnormal range for double but the last 11 bits
of the 64-bit extended-precision mantissa happen to be zero. This
patch forces the exception in a similar way to previous fixes.
As with the exp2 and exp fixes, the exp10f changes may in fact not be
needed to ensure underflow exceptions, but are included for
consistency and to fix the exp10 part of bug 18875 by ensuring that
excess range and precision is removed from underflowing return values.
Tested for x86_64 and x86.
[BZ #18875]
[BZ #18966]
* sysdeps/i386/fpu/e_exp10.S (dbl_min): New object.
(MO): New macro.
(__ieee754_exp10): For small results, force underflow exception
and remove excess range and precision from return value.
* sysdeps/i386/fpu/e_exp10f.S (flt_min): New object.
(MO): New macro.
(__ieee754_exp10f): For small results, force underflow exception
and remove excess range and precision from return value.
* math/auto-libm-test-in: Add more tests of exp10.
* math/auto-libm-test-out: Regenerated.
On i386, the double version of exp can miss underflow exceptions if
the result is in the subnormal range for double but the last 11 bits
of the 64-bit extended-precision mantissa happen to be zero. This
patch forces the exception in a similar way to previous fixes.
As with the exp2 fixes, the expf changes may in fact not be needed to
ensure underflow exceptions, but are included for consistency and to
fix the exp part of bug 18875 by ensuring that excess range and
precision is removed from underflowing return values.
Tested for x86_64 and x86.
[BZ #18875]
[BZ #18961]
* sysdeps/i386/fpu/e_exp.S (dbl_min): New object.
(MO): New macro.
(__ieee754_exp): For small results, force underflow exception and
remove excess range and precision from return value.
(__exp_finite): Likewise.
* sysdeps/i386/fpu/e_expf.S (flt_min): New object.
(MO): New macro.
(__ieee754_expf): For small results, force underflow exception and
remove excess range and precision from return value.
(__expf_finite): Likewise.
* math/auto-libm-test-in: Add more tests of exp.
* math/auto-libm-test-out: Regenerated.
Various exp2 implementations in glibc can miss underflow exceptions
when the scaling down part of the calculation is exact (or, in the x86
case, when the conversion from extended precision to the target
precision is exact). This patch forces the exception in a similar way
to previous fixes.
The x86 exp2f changes may in fact not be needed for this purpose -
it's likely to be the case that no argument of type float has an exp2
result so close to an exact subnormal float value that it equals that
value when rounded to 64 bits (even taking account of variation
between different x86 implementations). However, they are included
for consistency with the changes to exp2 and so as to fix the exp2f
part of bug 18875 by ensuring that excess range and precision is
removed from underflowing return values.
Tested for x86_64, x86 and mips64.
[BZ #16521]
[BZ #18875]
* math/e_exp2l.c (__ieee754_exp2l): Force underflow exception for
small results.
* sysdeps/i386/fpu/e_exp2.S (dbl_min): New object.
(MO): New macro.
(__ieee754_exp2): For small results, force underflow exception and
remove excess range and precision from return value.
* sysdeps/i386/fpu/e_exp2f.S (flt_min): New object.
(MO): New macro.
(__ieee754_exp2f): For small results, force underflow exception
and remove excess range and precision from return value.
* sysdeps/i386/fpu/e_exp2l.S (ldbl_min): New object.
(MO): New macro.
(__ieee754_exp2l): Force underflow exception for small results.
* sysdeps/ieee754/dbl-64/e_exp2.c (__ieee754_exp2): Likewise.
* sysdeps/ieee754/flt-32/e_exp2f.c (__ieee754_exp2f): Likewise.
* sysdeps/x86_64/fpu/e_exp2l.S (ldbl_min): New object.
(MO): New macro.
(__ieee754_exp2l): Force underflow exception for small results.
* math/auto-libm-test-in: Add more tests or exp2.
* math/auto-libm-test-out: Regenerated.
If you pass in a path that fails to be opened, then output_path is set to
NULL, and an error is flagged. Then at the end, we use both of those:
cannot write output files to `(null)': No such file or directory
Tweak the message to use the user's input when output_path is NULL.
It was noted in
<https://sourceware.org/ml/libc-alpha/2012-09/msg00305.html> that the
bits/*.h naming scheme should only be used for installed headers.
This patch renames bits/atomic.h to atomic-machine.h to follow that
convention.
This is the only change in this series that needs to change the
filename rather than simply removing a directory level (because both
atomic.h and bits/atomic.h exist at present).
Tested for x86_64 (testsuite, and that installed stripped shared
libraries are unchanged by the patch).
[BZ #14912]
* sysdeps/aarch64/bits/atomic.h: Move to ...
* sysdeps/aarch64/atomic-machine.h: ...here.
(_AARCH64_BITS_ATOMIC_H): Rename macro to
_AARCH64_ATOMIC_MACHINE_H.
* sysdeps/alpha/bits/atomic.h: Move to ...
* sysdeps/alpha/atomic-machine.h: ...here.
* sysdeps/arm/bits/atomic.h: Move to ...
* sysdeps/arm/atomic-machine.h: ...here. Update comments.
* bits/atomic.h: Move to ...
* sysdeps/generic/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/i386/bits/atomic.h: Move to ...
* sysdeps/i386/atomic-machine.h: ...here.
* sysdeps/ia64/bits/atomic.h: Move to ...
* sysdeps/ia64/atomic-machine.h: ...here.
* sysdeps/m68k/coldfire/bits/atomic.h: Move to ...
* sysdeps/m68k/coldfire/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/m68k/m680x0/m68020/bits/atomic.h: Move to ...
* sysdeps/m68k/m680x0/m68020/atomic-machine.h: ...here.
* sysdeps/microblaze/bits/atomic.h: Move to ...
* sysdeps/microblaze/atomic-machine.h: ...here.
* sysdeps/mips/bits/atomic.h: Move to ...
* sysdeps/mips/atomic-machine.h: ...here.
(_MIPS_BITS_ATOMIC_H): Rename macro to _MIPS_ATOMIC_MACHINE_H.
* sysdeps/powerpc/bits/atomic.h: Move to ...
* sysdeps/powerpc/atomic-machine.h: ...here. Update comments.
* sysdeps/powerpc/powerpc32/bits/atomic.h: Move to ...
* sysdeps/powerpc/powerpc32/atomic-machine.h: ...here. Update
comments. Include <atomic-machine.h> instead of <bits/atomic.h>.
* sysdeps/powerpc/powerpc64/bits/atomic.h: Move to ...
* sysdeps/powerpc/powerpc64/atomic-machine.h: ...here. Include
<atomic-machine.h> instead of <bits/atomic.h>.
* sysdeps/s390/bits/atomic.h: Move to ...
* sysdeps/s390/atomic-machine.h: ...here.
* sysdeps/sparc/sparc32/bits/atomic.h: Move to ...
* sysdeps/sparc/sparc32/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/sparc/sparc32/sparcv9/bits/atomic.h: Move to ...
* sysdeps/sparc/sparc32/sparcv9/atomic-machine.h: ...here.
* sysdeps/sparc/sparc64/bits/atomic.h: Move to ...
* sysdeps/sparc/sparc64/atomic-machine.h: ...here.
* sysdeps/tile/bits/atomic.h: Move to ...
* sysdeps/tile/atomic-machine.h: ...here.
* sysdeps/tile/tilegx/bits/atomic.h: Move to ...
* sysdeps/tile/tilegx/atomic-machine.h: ...here. Include
<sysdeps/tile/atomic-machine.h> instead of
<sysdeps/tile/bits/atomic.h>.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/tile/tilepro/bits/atomic.h: Move to ...
* sysdeps/tile/tilepro/atomic-machine.h: ...here. Include
<sysdeps/tile/atomic-machine.h> instead of
<sysdeps/tile/bits/atomic.h>.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/unix/sysv/linux/arm/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/arm/atomic-machine.h: ...here. Include
<sysdeps/arm/atomic-machine.h> instead of
<sysdeps/arm/bits/atomic.h>.
* sysdeps/unix/sysv/linux/hppa/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/hppa/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/unix/sysv/linux/m68k/coldfire/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/m68k/coldfire/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/unix/sysv/linux/nios2/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/nios2/atomic-machine.h: ...here.
(_NIOS2_BITS_ATOMIC_H): Rename macro to _NIOS2_ATOMIC_MACHINE_H.
* sysdeps/unix/sysv/linux/sh/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/sh/atomic-machine.h: ...here.
* sysdeps/x86_64/bits/atomic.h: Move to ...
* sysdeps/x86_64/atomic-machine.h: ...here.
* include/atomic.h: Include <atomic-machine.h> instead of
<bits/atomic.h>.
The ldbl-128 / ldbl-128ibm implementation of lgammal converts (the
floor of minus) non-integer negative arguments to int to determine the
value of signgam. When those values are outside the range of int,
this produces spurious "invalid" exceptions and incorrect values of
signgam. This patch fixes this by instead determining signgam through
comparing half the integer in question to floor of half the integer.
Tested for mips64, x86_64 and x86.
[BZ #18952]
* sysdeps/ieee754/ldbl-128/e_lgammal_r.c (__ieee754_lgammal_r): Do
not convert non-integer negative arguments to int to determine the
value of signgam.
* math/auto-libm-test-in: Add more tests of lgamma.
* math/auto-libm-test-out: Regenerated.
The existing implementations of lgamma functions (except for the ia64
versions) use the reflection formula for negative arguments. This
suffers large inaccuracy from cancellation near zeros of lgamma (near
where the gamma function is +/- 1).
This patch fixes this inaccuracy. For arguments above -2, there are
no zeros and no large cancellation, while for sufficiently large
negative arguments the zeros are so close to integers that even for
integers +/- 1ulp the log(gamma(1-x)) term dominates and cancellation
is not significant. Thus, it is only necessary to take special care
about cancellation for arguments around a limited number of zeros.
Accordingly, this patch uses precomputed tables of relevant zeros,
expressed as the sum of two floating-point values. The log of the
ratio of two sines can be computed accurately using log1p in cases
where log would lose accuracy. The log of the ratio of two gamma(1-x)
values can be computed using Stirling's approximation (the difference
between two values of that approximation to lgamma being computable
without computing the two values and then subtracting), with
appropriate adjustments (which don't reduce accuracy too much) in
cases where 1-x is too small to use Stirling's approximation directly.
In the interval from -3 to -2, using the ratios of sines and of
gamma(1-x) can still produce too much cancellation between those two
parts of the computation (and that interval is also the worst interval
for computing the ratio between gamma(1-x) values, which computation
becomes more accurate, while being less critical for the final result,
for larger 1-x). Because this can result in errors slightly above
those accepted in glibc, this interval is instead dealt with by
polynomial approximations. Separate polynomial approximations to
(|gamma(x)|-1)(x-n)/(x-x0) are used for each interval of length 1/8
from -3 to -2, where n (-3 or -2) is the nearest integer to the
1/8-interval and x0 is the zero of lgamma in the relevant half-integer
interval (-3 to -2.5 or -2.5 to -2).
Together, the two approaches are intended to give sufficient accuracy
for all negative arguments in the problem range. Outside that range,
the previous implementation continues to be used.
Tested for x86_64, x86, mips64 and powerpc. The mips64 and powerpc
testing shows up pre-existing problems for ldbl-128 and ldbl-128ibm
with large negative arguments giving spurious "invalid" exceptions
(exposed by newly added tests for cases this patch doesn't affect the
logic for); I'll address those problems separately.
[BZ #2542]
[BZ #2543]
[BZ #2558]
* sysdeps/ieee754/dbl-64/e_lgamma_r.c (__ieee754_lgamma_r): Call
__lgamma_neg for arguments from -28.0 to -2.0.
* sysdeps/ieee754/flt-32/e_lgammaf_r.c (__ieee754_lgammaf_r): Call
__lgamma_negf for arguments from -15.0 to -2.0.
* sysdeps/ieee754/ldbl-128/e_lgammal_r.c (__ieee754_lgammal_r):
Call __lgamma_negl for arguments from -48.0 or -50.0 to -2.0.
* sysdeps/ieee754/ldbl-96/e_lgammal_r.c (__ieee754_lgammal_r):
Call __lgamma_negl for arguments from -33.0 to -2.0.
* sysdeps/ieee754/dbl-64/lgamma_neg.c: New file.
* sysdeps/ieee754/dbl-64/lgamma_product.c: Likewise.
* sysdeps/ieee754/flt-32/lgamma_negf.c: Likewise.
* sysdeps/ieee754/flt-32/lgamma_productf.c: Likewise.
* sysdeps/ieee754/ldbl-128/lgamma_negl.c: Likewise.
* sysdeps/ieee754/ldbl-128/lgamma_productl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/lgamma_negl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/lgamma_productl.c: Likewise.
* sysdeps/ieee754/ldbl-96/lgamma_negl.c: Likewise.
* sysdeps/ieee754/ldbl-96/lgamma_product.c: Likewise.
* sysdeps/ieee754/ldbl-96/lgamma_productl.c: Likewise.
* sysdeps/generic/math_private.h (__lgamma_negf): New prototype.
(__lgamma_neg): Likewise.
(__lgamma_negl): Likewise.
(__lgamma_product): Likewise.
(__lgamma_productl): Likewise.
* math/Makefile (libm-calls): Add lgamma_neg and lgamma_product.
* math/auto-libm-test-in: Add more tests of lgamma.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
Topic: strptime supports a %z input field descriptor, which parses a
time zone offset from UTC time into the broken-out time field tm_gmtoff.
Problems:
1) In the current implementation, the minutes portion calculation is
correct only for minutes evenly divisible by 3. This is because the
minutes value is converted to decimal time, but inadequate precision
leads to rounding which calculates results that are too low for
some values.
For example, due to rounding, a +1159 offset string results in an
incorrect tm_gmtoff of 43128 (== 11 * 3600 + 58.8 * 60) seconds,
instead of 43140 (== 11 * 3600 + 59 * 60) seconds. In contrast,
a +1157 offset (minutes divisible by 3) does not cause the bug,
and results in a correct tm_gmtoff of 43020.
2) strptime's %z specifier will not parse time offsets less than
-1200 or greater than +1200, or if only hour digits are present, less
than -12 or greater than +12. It will return NULL for offsets outside
that range. These limits do not meet historical and modern use cases:
* Present day exceeds the +1200 limit:
- Pacific/Auckland (New Zealand) summer time is +1300.
- Pacific/Kiritimati (Christmas Island) is +1400.
- Pacific/Apia (Samoa) summer time is +1400.
* Historical offsets exceeded +1500/-1500.
* POSIX supports -2459 to +2559.
* Offsets up to +/-9959 may occasionally be useful.
* Paul Eggert's notes provide additional detail:
- https://sourceware.org/ml/libc-alpha/2014-12/msg00068.html
- https://sourceware.org/ml/libc-alpha/2014-12/msg00072.html
3) tst-strptime2, part of the 'make check' test suite, does not test
for the above problems.
Corrective actions:
1) In time/strptime_l.c, calculate the offset from the hour and
minute portions directly, without the rounding errors introduced by
decimal time.
2) Remove the +/-1200 range limit, permitting strptime to parse offsets
from -9959 through +9959.
3) Add zone offset values to time/tst-strptime2.c.
* Test minutes evenly divisible by three (+1157) and not evenly
divisible by three (+1158 and +1159).
* Test offsets near the old and new range limits (-1201, -1330, -2459,
-2500, -99, -9959, +1201, +1330, +1400, +1401, +2559, +2600, +99,
and +9959)
The revised strptime passes all old and new tst-strptime2 tests.
This patch fixes the default wordsize-32 mmap implementation offset
calculation for negative values. Current code uses signed shift
operation to calculate the multiple size to use with syscall and
it is implementation defined. Change it to use a division base
on mmap page size (default being as before, 4096).
Tested on armv7hf.
[BZ #18877]
* posix/Makefile (tests): Add tst-mmap-offset.
* posix/tst-mmap.c: New file.
* sysdeps/unix/sysv/linux/generic/wordsize-32/mmap.c (__mmap): Fix
offset calculation for negative values.
This patch set introduces optimized string, wcsmbs and memory functions for
S390/S390x. The functions are accelerated by the usage of the new z13 vector
instructions.
The Principles of Operations manual for IBM z13 is publically available:
http://publibfi.boulder.ibm.com/epubs/pdf/dz9zr010.pdf
The support for these instructions in assembler was introduced by commits:
-"[Committed] S/390: Add support for IBM z13."
(https://sourceware.org/ml/binutils/2015-01/msg00197.html)
-"[Committed] S/390: Add more IBM z13 instructions"
(https://sourceware.org/ml/binutils/2015-03/msg00088.html)
The first patches do preparation for the latter optimization patches.
The floating point exception handling - fetestexcept(), ... - is fixed and
the platform and hwcap strings are extended.
The current ifunc routines memset, memcpy and memcmp are refactored and the
ifunc test-framework is now enabled.
A S390 specific configure-check tests if the used binutils supports the new
vector instructions. The optimized functions are provided via ifunc if the
binutils supports the vector instructions. Otherwise a message is dumped to
configure output and only the currently used common code functions are
available.
The optimized functions are implemented in common for s390-32 and s390-64
and the few differences are handled via #ifdef.
The ifunc-resolvers are defined in files sysdeps/s390/multiarch/<func>.c,
which choose either the current implementation __<func>_c() or the vector
implementation __<func>_vx() depending on the HWCAP_S390_VX flag bit in
AT_HWCAP field. If the bit is set, the hardware and the kernel are supporting
vector registers and instructions. If the used binutils lacks vector-support,
then the default implementation in string or wcsmbs directory is included
here instead.
The file sysdeps/s390/multiarch/<func>-c.c includes the current implementation
and defines the function name __<func>_c.
The assembler files sysdeps/s390/multiarch/<func>-vx.S with the vector
instructions are using the directive '.machine "z13"' to allow building glibc
without option '-march=z13'. Additionally the directive '.machinemode
"zarch_nohighgprs"' is needed for the 31bit glibc. This mode does not set the
highgprs flag in ELF header, which would lead to an unloadable libc on a 31bit
kernel.
The most optimized string functions are structured in the same way:
The first 16 bytes of the string is loaded unaligned via vlbb - vector load
to block boundary (e.g. 4k). This instruction loads 16 bytes if possible.
In case of a page cross, it only loads the last bytes of the current page
without a segmentation fault.
Afterwards these first part of string is processed. If e.g. for strlen the end
of string is reached within this first part, the function returns. Otherwise
the pointer is aligned to 16 byte, so i can load a full vector register with vl
without checking for a page cross. Afterwards the first part of string is
processed. If e.g. for strlen the end of string is reached within this first
part, the function returns. Otherwise the pointer is aligned to 16 byte, so
a full vector register can be loaded with vl - vector load - without checking
for a page cross. The remaining string is processed in a four times unrolled
loop, because benchmark results measured improvements compared to a non
unrolled loop.
The optimized wide string functions can only handle 4byte aligned string
pointers. Although a wchar_t pointer should always be 4byte aligned, the most
current common code wide string functions can handle non aligned strings.
Thus the optimized functions will fall back to the common code functions in
case of a non aligned wide string to behave the same as before this patch.
Some string tests can test the string and the wide string version of a function.
The remaining ones are extended and new wide string tests are added.
This is the same in case of the benchtests.
ChangeLog:
* NEWS: New item for IBM z13 string optimizations.
Joseph Myers
Florian Weimer
Paul Murphy
Chris Metcalf
Tulio Magno Quites Machado Filho
Mike Frysinger
Gunnar Hjalmarsson
Egmont Koblinger
H.J. Lu
Szabolcs Nagy
Carlos O'Donell
Paul Pluzhnikov
Martin Sebor
Maciej W. Rozycki
Wilco Dijkstra
Vincent Bernat
Andreas Schwab
Roland McGrath
Brett Neumeier
Paul Eggert
James Perkins
Adhemerval Zanella
Gleb Fotengauer-Malinovskiy
Stefan Liebler