If the MERAM platform data is defined, but the MERAM has not been
properly initaliazed we need to safely fall back to non-MERAM operation.
Signed-off-by: Damian Hobson-Garcia <dhobsong@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Allow displaying L1 video data on top of the primary L0 layer.
The L1 layer position and dimensions can be configured and the
layer enabled/disabled by using the appropriate L1 controls
added by this patch.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Add adapter driver for I2C adapter in Coral-P(A)/Lime GDCs.
So we can easily access devices on controller's I2C bus using
i2c-dev interface.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
By default the GDC registers are located in the middle of the 64MiB
area for video RAM and registers. When 32MiB VRAM or more is used,
relocate the register space to the top of the 64MiB space so that
we get the contiguous VRAM for GDC frame buffer layers, drawing
frames, capture and cursor buffers.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
If the bootloader has already initialized the display
controller, do not re-initialize it in the driver. Take over
the bootloader's configuration instead. This is already supported
for non PCI GDCs Lime and Mint. Add this functionality for PCI
GDCs Coral-P and Coral-PA. It is useful to avoid flicker and
also avoids unneeded init delays while booting.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Initialize smem_len field to the actual frame buffer size and
not to the whole video RAM size. This prevents overwriting
other video memory (which could be used by other layers, cursors
or accelerated drivers) by frame buffer applications relying on
fix.smem_len.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
32bpp means ARGB 8888 in the driver, therfore the transparency length
and offset should be 8 and 24 respectively. However, the transparency
length and offset were previously 0, which means that the driver supports
RGB 888 without alpha blending when 32bpp is used.
So, the transparency checking in 32bpp is corrected so that the
transparency length and offset are 8 and 24 respectively.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This patch adds gpio setup function to resume function to ensure
gpio used by FIMD IP and LCD panel during a resume.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
amiga_chip_alloc() already aligns to the PAGE_SIZE
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
The check should compare the available memory size with the highest allocation
value (VIDEOMEMSIZE_*_2M), not with the lowest value (VIDEOMEMSIZE_*_1M).
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
The driver can be built as either a PCI or platform (OF) driver. It
might make sense to built it as both (though that is not currently
possible) but it certainly doesn't make sense to build it as neither!
Add dependencies and add a choice group to ensure that exactly one of
FB_MB862XX_PCI_GDC and FB_MB862XX_LIME is selected.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Compared to s3c64xx, S5P series such as S5PC100 and S5PV210 have
the different window features including valid bpp, palette size
and palette bpp. Therefore, window variant information for S5P
should be added.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Additional validate bpps are added to windows as follows:
window0: 18 bpp for RGB666
window1, 2 and 3: 28 bpp for ARGB4888
window4: 19 bpp for ARGB1666, 28 bpp for ARGB4888
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Offset values for OSD size registers of window 1 and 2 are corrected.
The offset values of OSD size registers are as follows:
window0: VIDOSDC (0x8)
window1 and 2: VIDOSDD (0xc)
window3 and 4: not present
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Commit e66eed651f ("list: remove prefetching from
regular list iterators") removed the include of prefetch.h from list.h,
so we need to include it explicitly, now.
fixes this build error on powerpc:
drivers/video/udlfb.c: In function 'dlfb_compress_hline':
drivers/video/udlfb.c:421: error: implicit declaration of function 'prefetch_range'
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Request_mem_region should be used with release_mem_region, not
release_resource.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@s exists@
expression e1,e2,e3,e4,e;
@@
*e4 = request_mem_region(e1,e2,e3)
... when != e4 = e
*release_resource(e4);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Request_mem_region should be used with release_mem_region, not
release_resource.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@s exists@
expression e1,e2,e3,e4,e;
@@
*e4 = request_mem_region(e1,e2,e3)
... when != e4 = e
*release_resource(e4);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Request_mem_region should be used with release_mem_region, not
release_resource.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@s exists@
expression e1,e2,e3,e4,e;
@@
*e4 = request_mem_region(e1,e2,e3)
... when != e4 = e
*release_resource(e4);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
build warning:
...
drivers/video/udlfb.c:1590: warning: ignoring return value of ‘device_create_file’, declared with attribute warn_unused_result
drivers/video/udlfb.c:1592: warning: ignoring return value of ‘device_create_bin_file’, declared with attribute warn_unused_result
...
So add two checks to get rid of 'em.
Signed-off-by: Liu Yuan <tailai.ly@taobao.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Copy and paste from the Xorg DDX. Tested on TwisterK (Compaq Presario 700).
Signed-off-by: Tormod Volden <debian.tormod@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
The notifier function calls sh_mobile_lcdc_stop() and
sh_mobile_lcdc_start(), which already take care about the runtime PM
state. Remove redundant calls.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
The "ret" variable in sh_mobile_lcdc_start() is only used at one
location, move its definition to the inner-most scope.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
drivers/video/efifb.c:247: warning: cast to pointer from integer of different size
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (23 commits)
sh: Ignore R_SH_NONE module relocations.
SH: SE7751: Fix pcibios_map_platform_irq prototype.
sh: remove warning and warning_symbol from struct stacktrace_ops
sh: wire up sys_sendmmsg.
clocksource: sh_tmu: Runtime PM support
clocksource: sh_tmu: __clocksource_updatefreq_hz() update
clocksource: sh_cmt: Runtime PM support
clocksource: sh_cmt: __clocksource_updatefreq_hz() update
dmaengine: shdma: synchronize RCU before freeing, simplify spinlock
dmaengine: shdma: add runtime- and system-level power management
dmaengine: shdma: fix locking
sh: sh-sci: sh7377 and sh73a0 build fixes
sh: cosmetic improvement: use an existing pointer
serial: sh-sci: suspend/resume wakeup support V2
serial: sh-sci: Runtime PM support
sh: select IRQ_FORCED_THREADING.
sh: intc: Set virtual IRQs as nothread.
sh: fixup fpu.o compile order
i2c: add a module alias to the sh-mobile driver
ALSA: add a module alias to the FSI driver
...
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf tools: Fix sample type size calculation in 32 bits archs
profile: Use vzalloc() rather than vmalloc() & memset()
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (247 commits)
[media] gspca - sunplus: Fix some warnings and simplify code
[media] gspca: Fix some warnings tied to 'no debug'
[media] gspca: Unset debug by default
[media] gspca - cpia1: Remove a bad conditional compilation instruction
[media] gspca - main: Remove USB traces
[media] gspca - main: Version change to 2.13
[media] gspca - stk014 / t613: Accept the index 0 in querymenu
[media] gspca - kinect: Remove __devinitdata
[media] gspca - cpia1: Fix some warnings
[media] video/Kconfig: Fix mis-classified devices
[media] support for medion dvb stick 1660:1921
[media] tm6000: fix uninitialized field, change prink to dprintk
[media] cx231xx: Add support for Iconbit U100
[media] saa7134 add new TV cards
[media] Use a more consistent value for RC repeat period
[media] cx18: Move spinlock and vb_type initialisation into stream_init
[media] tm6000: remove tm6010 sif audio start and stop
[media] tm6000: remove unused exports
[media] tm6000: add pts logging
[media] tm6000: change from ioctl to unlocked_ioctl
...
* git://git.kernel.org/pub/scm/linux/kernel/git/hirofumi/fatfs-2.6:
fat: Fix statfs->f_namelen
fat: Replace all printk with fat_msg()
fat: Add fat_msg() function for preformated FAT messages
fat: Convert fat_fs_error to use %pV
fat: Fix possible null deref in fat_cache_add()
fat: use new setup() for ->dir_ops too
The coretemp driver provides a single set of device attributes for each
physical core of a HT CPU to avoid duplicate sensors. This
functionality was introduced with commit d883b9f097 ("hwmon:
(coretemp) Skip duplicate CPU entries").
Commit e40cc4bdfd ("x86/hwmon: register alternate sibling upon CPU
removal") extends this functionality to register the HT sibling of a CPU
which is taken offline, to ensure that sensor attributes are provided if
at least one HT sibling of a core is online.
Add comments into the code describing the functionality in some more
detail.
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We try to enforce it by using -Wstrict-prototypes, but apparently they
sometimes get through. Introduced by 4eec42f392 ("watchdog: Change
the default timeout and configure nmi watchdog period based").
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The shift used here to count the number of bits set in
the mask doesn't work above the low part for archs that
are not 64 bits.
Fix the constant used for the shift.
This fixes a 32-bit perf top failure reported by Eric Dumazet:
Can't parse sample, err = -14
Can't parse sample, err = -14
...
Reported-and-tested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com
Link: http://lkml.kernel.org/r/1306200686-17317-1-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (27 commits)
PCI: Don't use dmi_name_in_vendors in quirk
PCI: remove unused AER functions
PCI/sysfs: move bus cpuaffinity to class dev_attrs
PCI: add rescan to /sys/.../pci_bus/.../
PCI: update bridge resources to get more big ranges when allocating space (again)
KVM: Use pci_store/load_saved_state() around VM device usage
PCI: Add interfaces to store and load the device saved state
PCI: Track the size of each saved capability data area
PCI/e1000e: Add and use pci_disable_link_state_locked()
x86/PCI: derive pcibios_last_bus from ACPI MCFG
PCI: add latency tolerance reporting enable/disable support
PCI: add OBFF enable/disable support
PCI: add ID-based ordering enable/disable support
PCI hotplug: acpiphp: assume device is in state D0 after powering on a slot.
PCI: Set PCIE maxpayload for card during hotplug insertion
PCI/ACPI: Report _OSC control mask returned on failure to get control
x86/PCI: irq and pci_ids patch for Intel Panther Point DeviceIDs
PCI: handle positive error codes
PCI: check pci_vpd_pci22_wait() return
PCI: Use ICH6_GPIO_EN in ich6_lpc_acpi_gpio
...
Fix up trivial conflicts in include/linux/pci_ids.h: commit a6e5e2be44
moved the intel SMBUS ID definitons to the i2c-i801.c driver.
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
xfs: obey minleft values during extent allocation correctly
xfs: reset buffer pointers before freeing them
xfs: avoid getting stuck during async inode flushes
xfs: fix xfs_itruncate_start tracing
xfs: fix duplicate workqueue initialisation
xfs: kill off xfs_printk()
xfs: fix race condition in AIL push trigger
xfs: make AIL target updates and compares 32bit safe.
xfs: always push the AIL to the target
xfs: exit AIL push work correctly when AIL is empty
xfs: ensure reclaim cursor is reset correctly at end of AG
xfs: add an x86 compat handler for XFS_IOC_ZERO_RANGE
xfs: fix compiler warning in xfs_trace.h
xfs: cleanup duplicate initializations
xfs: reduce the number of pagb_lock roundtrips in xfs_alloc_clear_busy
xfs: exact busy extent tracking
xfs: do not immediately reuse busy extent ranges
xfs: optimize AGFL refills
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (137 commits)
ARM: bcmring: convert to use sp804 clockevents
ARM: bcmring: convert to sp804 clocksource
ARM: 6912/1: bcmring: Add clkdev table in init_early
clockevents: ARM sp804: obtain sp804 timer rate via clks
clockevents: ARM sp804: allow clockevent name to be specified
clocksource: ARM sp804: obtain sp804 timer rate via clks
clocksource: ARM sp804: allow clocksource name to be specified
clocksource: convert OMAP1 to 32-bit down counting clocksource
clocksource: convert MXS timrotv2 to 32-bit down counting clocksource
clocksource: convert SPEAr platforms 16-bit up counting clocksource
clocksource: convert Integrator/AP 16-bit down counting clocksource
clocksource: convert W90x900 24-bit down counting clocksource
clocksource: convert ARM 32-bit down counting clocksources
clocksource: convert ARM 32-bit up counting clocksources
clocksource: add common mmio clocksource
ARM: update sa1100 to reflect PXA updates
ARM: omap1: convert to using readl/writel instead of volatile struct
ARM: omap1: delete useless interrupt handler
ARM: s5p: consolidate selection of timer register
ARM: 6939/1: fix missing 'cpu_relax()' declaration
...
Fixed the broken links in the SubmittingPatches file.
[ The old links turn out to not be broken after all, but the new links
are certainly more readable - Linus ]
Signed-off-by: Vikram Narayanan <vikram186@gmail.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixed typos.
v2: Incorporated changes by Randy Dunlap.
Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
max_user_instances was removed in this commit:
commit 9df04e1f25
Author: Davide Libenzi <davidel@xmailserver.org>
Date: Thu Jan 29 14:25:26 2009 -0800
epoll: drop max_user_instances and rely only on max_user_watches
but the documentation entry was not removed.
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Lucian Adrian Grijincu <lucian.grijincu@gmail.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
v2, updated based on comments from Joe and Paul.
Update to Documentation/dontdiff, based on many updates to
various .gitignore patches over the last 2 years.
Initially begun by Michael Prokop <mika@grml.org>, with lots of
changes by Randy Dunlap.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Michael Prokop <mika@grml.org>
Cc: Joe Perches <joe@perches.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, apic: Include module.h header in apic_flat_64.c
x86, apic: Make apic drivers static
x86, apic: Clean up bigsmp apic selection code
x86, apic: Use .apicdrivers section for the apic drivers list
x86, apic: Introduce .apicdrivers section to find the list of apic drivers
x86, x2apic: Move the common bits to x2apic.h
x86, x2apic: Minimize IPI register writes using cluster groups
x86, x2apic: Track the x2apic cluster sibling map
x86, x2apic: Remove duplicate code for IPI mask routines
x86, apic: Use probe routines to simplify apic selection
x86, ioapic: Consolidate mp_ioapic_routing[] into 'struct ioapic'
x86, ioapic: Consolidate gsi routing info into 'struct ioapic'
x86, ioapic: Consolidate mp_ioapics[] into 'struct ioapic'
x86, ioapic: Consolidate ioapic_saved_data[] into 'struct ioapic'
x86, ioapic: Add struct ioapic
x86, ioapic: Remove duplicate code for saving/restoring RTEs
x86, ioapic: Use ioapic_saved_data while enabling intr-remapping
x86, ioapic: Allocate ioapic_saved_data early
x86, ioapic: Fix potential resume deadlock
* 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (970 commits)
staging: usbip: replace usbip_u{dbg,err,info} and printk with dev_ and pr_
staging:iio: Trivial kconfig reorganization and uniformity improvements.
staging:iio:documenation partial update.
staging:iio: use pollfunc allocation helpers in remaining drivers.
staging:iio:max1363 misc cleanups and use of for_each_bit_set to simplify event code spitting out.
staging:iio: implement an iio_info structure to take some of the constant elements out of iio_dev.
staging:iio:meter:ade7758: Use private data space from iio_allocate_device
staging:iio:accel:lis3l02dq make write_reg_8 take value not a pointer to value.
staging:iio: ring core cleanups + check if read_last available in lis3l02dq
staging:iio:core cleanup: squash tiny wrappers and use dev_set_name to handle creation of event interface name.
staging:iio: poll func allocation clean up.
staging:iio:ad7780 trivial unused header cleanup.
staging:iio:adc: AD7780: Use private data space from iio_allocate_device + trivial fixes
staging:iio:adc:AD7780: Convert to new channel registration method
staging:iio:adc: AD7606: Drop dev_data in favour of iio_priv()
staging:iio:adc: AD7606: Consitently use indio_dev
staging:iio: Rip out helper for software rings.
staging:iio:adc:AD7298: Use private data space from iio_allocate_device
staging:iio: rationalization of different buffer implementation hooks.
staging:iio:imu:adis16400 avoid allocating rx, tx, and state separately from iio_dev.
...
Fix up trivial conflicts in
- drivers/staging/intel_sst/intelmid.c: patches applied in both branches
- drivers/staging/rt2860/common/cmm_data_{pci,usb}.c: removed vs spelling
- drivers/staging/usbip/vhci_sysfs.c: trivial header file inclusion
Paul Mundt
Damian
Anatolij Gustschin
Jingoo Han
Geert Uytterhoeven
Ben Hutchings
Stephen Rothwell
Julia Lawall
Liu Yuan
Tormod Volden
axel lin
Guennadi Liakhovetski
Konstantin Khlebnikov
Linus Torvalds
Guenter Roeck
Frederic Weisbecker
Vikram Narayanan
Nicolas Kaiser
Harry Wei
Lucian Adrian Grijincu
Randy Dunlap