Commit Graph

80234 Commits

Author SHA1 Message Date
Florian Fainelli e822f75d84 arm: mvebu: enable the USB ports on Armada 370 Reference Design board
This patch modifies the Armada 370 Reference Design DTS file to enable
support for the two USB ports found on this board.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-08 21:44:30 +00:00
Paul Bolle f3ae1ae901 ARM: dove: drop "select COMMON_CLK_DOVE"
Commit 5b03df9ace ("ARM: dove: switch to
DT clock providers") added "select COMMON_CLK_DOVE" to Marvell Dove's
Kconfig entry. But there's no Kconfig symbol COMMON_CLK_DOVE, which
makes this select statement a nop. It's probably a leftover of some
experimental code that never hit mainline. Drop it.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-08 21:34:49 +00:00
Andrew Lunn 89c58c198b rtc: rtc-mv: Add support for clk to avoid lockups
The Marvell RTC on Kirkwood makes use of the runit clock. Ensure the
driver clk_prepare_enable() this clock, otherwise there is a danger
the SoC will lockup when accessing RTC registers with the clock
disabled.

Reported-by: Simon Baatz <gmbnomis@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Simon Baatz <gmbnomis@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-08 21:34:41 +00:00
Andrew Lunn de88747f51 gpio: mvebu: Add clk support to prevent lockup
The kirkwood SoC GPIO cores use the runit clock. Add code to
clk_prepare_enable() runit, otherwise there is a danger of locking up
the SoC by accessing the GPIO registers when runit clock is not
ticking.

Reported-by: Simon Baatz <gmbnomis@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Simon Baatz <gmbnomis@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-08 21:34:34 +00:00
Sebastian Hesselbarth 7bf5b408b4 ARM: kirkwood: fix to retain gbe MAC addresses for DT kernels
The ethernet controller used on kirkwood looses its MAC address
register contents when the corresponding clock is gated. As soon as
mv643xx_eth is built as module, the clock gets gated and when loading
the module, the MAC address is gone.

Proper DT support for the mv643xx_eth driver is expected soon, so we add
a workaround to always enable ge0/ge1 clocks on kirkwood. This workaround
is also already used on non-DT kirkwood kernels.

Reported-by: Simon Baatz <gmbnomis@gmail.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Simon Baatz <gmbnomis@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-08 21:34:16 +00:00
Jason Cooper 93fff4ce19 ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency
When DT support for kirkwood was first introduced, there was no clock
infrastructure.  As a result, we had to manually pass the
clock-frequency to the driver from the device node.

Unfortunately, on kirkwood, with minimal config or all module configs,
clock-frequency breaks booting because of_serial doesn't consume the
gate_clk when clock-frequency is defined.

The end result on kirkwood is that runit gets gated, and then the boot
fails when the kernel tries to write to the serial port.

Fix the issue by removing the clock-frequency parameter from all
kirkwood dts files.

Booted on dreamplug without earlyprintk and successfully logged in via
ttyS0.

Reported-by: Simon Baatz <gmbnomis@gmail.com>
Tested-by: Simon Baatz <gmbnomis@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-08 21:32:52 +00:00
Simon Horman 44e9ac4575 ARM: shmobile: marzen: Include mmc/host.h
mmc/host.h provides MMC_CAP_SD_HIGHSPEED which is used in board-marzen.c

This resolves a build problem observed when compiling with
"mmc: tmio: remove unused and deprecated symbols" applied.

Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-08 16:29:23 +01:00
Linus Torvalds 47b3bc9073 Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Peter Anvin:
 "Several boot fixes (MacBook, legacy EFI bootloaders), another
  please-don't-brick fix, and some minor stuff."

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Do not try to sync identity map for non-mapped pages
  x86, doc: Be explicit about what the x86 struct boot_params requires
  x86: Don't clear efi_info even if the sentinel hits
  x86, mm: Make sure to find a 2M free block for the first mapped area
  x86: Fix 32-bit *_cpu_data initializers
  efivarfs: return accurate error code in efivarfs_fill_super()
  efivars: efivarfs_valid_name() should handle pstore syntax
  efi: be more paranoid about available space when creating variables
  iommu, x86: Add DMA remap fault reason
  x86, smpboot: Remove unused variable
2013-03-07 15:57:38 -08:00
Linus Torvalds 19cf3edbf3 Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM fixes from Russell King:
 "Mainly a group of fixes, the only exception is the wiring up of the
  kcmp syscall now that those patches went in during the last merge
  window."

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7668/1: fix memset-related crashes caused by recent GCC (4.7.2) optimizations
  ARM: 7667/1: perf: Fix section mismatch on armpmu_init()
  ARM: 7666/1: decompressor: add -mno-single-pic-base for building the decompressor
  ARM: 7665/1: Wire up kcmp syscall
  ARM: 7664/1: perf: remove erroneous semicolon from event initialisation
  ARM: 7663/1: perf: fix ARMv7 EVTYPE_MASK to include NSH bit
  ARM: 7662/1: hw_breakpoint: reset debug logic on secondary CPUs in s2ram resume
  ARM: 7661/1: mm: perform explicit branch predictor maintenance when required
  ARM: 7660/1: tlb: add branch predictor maintenance operations
  ARM: 7659/1: mm: make mm->context.id an atomic64_t variable
  ARM: 7658/1: mm: fix race updating mm->context.id on ASID rollover
  ARM: 7657/1: head: fix swapper and idmap population with LPAE and big-endian
  ARM: 7655/1: smp_twd: make twd_local_timer_of_register() no-op for nosmp
  ARM: 7652/1: mm: fix missing use of 'asid' to get asid value from mm->context.id
  ARM: 7642/1: netx: bump IRQ offset to 64
2013-03-07 13:47:18 -08:00
Dave Hansen 60f583d56a x86: Do not try to sync identity map for non-mapped pages
kernel_map_sync_memtype() is called from a variety of contexts.  The
pat.c code that calls it seems to ensure that it is not called for
non-ram areas by checking via pat_pagerange_is_ram().  It is important
that it only be called on the actual identity map because there *IS*
no map to sync for highmem pages, or for memory holes.

The ioremap.c uses are not as careful as those from pat.c, and call
kernel_map_sync_memtype() on PCI space which is in the middle of the
kernel identity map _range_, but is not actually mapped.

This patch adds a check to kernel_map_sync_memtype() which probably
duplicates some of the checks already in pat.c.  But, it is necessary
for the ioremap.c uses and shouldn't hurt other callers.

I have reproduced this bug and this patch fixes it for me and the
original bug reporter:

	https://lkml.org/lkml/2013/2/5/396

Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20130307163151.D9B58C4E@kernel.stglabs.ibm.com
Signed-off-by: Dave Hansen <dave@sr71.net>
Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2013-03-07 13:23:28 -08:00
Ivan Djelic 455bd4c430 ARM: 7668/1: fix memset-related crashes caused by recent GCC (4.7.2) optimizations
Recent GCC versions (e.g. GCC-4.7.2) perform optimizations based on
assumptions about the implementation of memset and similar functions.
The current ARM optimized memset code does not return the value of
its first argument, as is usually expected from standard implementations.

For instance in the following function:

void debug_mutex_lock_common(struct mutex *lock, struct mutex_waiter *waiter)
{
	memset(waiter, MUTEX_DEBUG_INIT, sizeof(*waiter));
	waiter->magic = waiter;
	INIT_LIST_HEAD(&waiter->list);
}

compiled as:

800554d0 <debug_mutex_lock_common>:
800554d0:       e92d4008        push    {r3, lr}
800554d4:       e1a00001        mov     r0, r1
800554d8:       e3a02010        mov     r2, #16 ; 0x10
800554dc:       e3a01011        mov     r1, #17 ; 0x11
800554e0:       eb04426e        bl      80165ea0 <memset>
800554e4:       e1a03000        mov     r3, r0
800554e8:       e583000c        str     r0, [r3, #12]
800554ec:       e5830000        str     r0, [r3]
800554f0:       e5830004        str     r0, [r3, #4]
800554f4:       e8bd8008        pop     {r3, pc}

GCC assumes memset returns the value of pointer 'waiter' in register r0; causing
register/memory corruptions.

This patch fixes the return value of the assembly version of memset.
It adds a 'mov' instruction and merges an additional load+store into
existing load/store instructions.
For ease of review, here is a breakdown of the patch into 4 simple steps:

Step 1
======
Perform the following substitutions:
ip -> r8, then
r0 -> ip,
and insert 'mov ip, r0' as the first statement of the function.
At this point, we have a memset() implementation returning the proper result,
but corrupting r8 on some paths (the ones that were using ip).

Step 2
======
Make sure r8 is saved and restored when (! CALGN(1)+0) == 1:

save r8:
-       str     lr, [sp, #-4]!
+       stmfd   sp!, {r8, lr}

and restore r8 on both exit paths:
-       ldmeqfd sp!, {pc}               @ Now <64 bytes to go.
+       ldmeqfd sp!, {r8, pc}           @ Now <64 bytes to go.
(...)
        tst     r2, #16
        stmneia ip!, {r1, r3, r8, lr}
-       ldr     lr, [sp], #4
+       ldmfd   sp!, {r8, lr}

Step 3
======
Make sure r8 is saved and restored when (! CALGN(1)+0) == 0:

save r8:
-       stmfd   sp!, {r4-r7, lr}
+       stmfd   sp!, {r4-r8, lr}

and restore r8 on both exit paths:
        bgt     3b
-       ldmeqfd sp!, {r4-r7, pc}
+       ldmeqfd sp!, {r4-r8, pc}
(...)
        tst     r2, #16
        stmneia ip!, {r4-r7}
-       ldmfd   sp!, {r4-r7, lr}
+       ldmfd   sp!, {r4-r8, lr}

Step 4
======
Rewrite register list "r4-r7, r8" as "r4-r8".

Signed-off-by: Ivan Djelic <ivan.djelic@parrot.com>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-07 16:14:22 +00:00
Sebastian Ott aebfa669d9 s390/scm: process availability
Let the bus code process scm availability information and
notify scm device drivers about the new state.

Reviewed-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-03-07 09:52:24 +01:00
Sebastian Ott 4fa3c01964 s390/scm_blk: suspend writes
Stop writing to scm after certain error conditions such as a concurrent
firmware upgrade. Resume to normal state once scm_blk_set_available is
called (due to an scm availability notification).

Reviewed-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-03-07 09:52:23 +01:00
Sebastian Ott 93481c9020 s390/scm_drv: extend notify callback
Extend the notify callback of scm_driver by an event parameter
to allow to distinguish between different notifications.

Reviewed-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-03-07 09:52:21 +01:00
Peter Jones 3c4aff6b9a x86, doc: Be explicit about what the x86 struct boot_params requires
If the sentinel triggers, we do not want the boot loader authors to
just poke it and make the error go away, we want them to actually fix
the problem.

This should help avoid making the incorrect change in non-compliant
bootloaders.

[ hpa: dropped the Documentation/x86/boot.txt hunk pending
  clarifications ]

Signed-off-by: Peter Jones <pjones@redhat.com>
Link: http://lkml.kernel.org/r/1362592823-28967-1-git-send-email-pjones@redhat.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2013-03-06 20:34:43 -08:00
Josh Boyer 2e604c0f19 x86: Don't clear efi_info even if the sentinel hits
When boot_params->sentinel is set, all we really know is that some
undefined set of fields in struct boot_params contain garbage.  In the
particular case of efi_info, however, there is a private magic for
that substructure, so it is generally safe to leave it even if the
bootloader is broken.

kexec (for which we did the initial analysis) did not initialize this
field, but of course all the EFI bootloaders do, and most EFI
bootloaders are broken in this respect (and should be fixed.)

Reported-by: Robin Holt <holt@sgi.com>
Link: http://lkml.kernel.org/r/CA%2B5PVA51-FT14p4CRYKbicykugVb=PiaEycdQ57CK2km_OQuRQ@mail.gmail.com
Tested-by: Josh Boyer <jwboyer@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2013-03-06 20:23:30 -08:00
Yinghai Lu 98e7a98997 x86, mm: Make sure to find a 2M free block for the first mapped area
Henrik reported that his MacAir 3.1 would not boot with

| commit 8d57470d8f
| Date:   Fri Nov 16 19:38:58 2012 -0800
|
|    x86, mm: setup page table in top-down

It turns out that we do not calculate the real_end properly:
We try to get 2M size with 4K alignment, and later will round down
to 2M, so we will get less then 2M for first mapping, in extreme
case could be only 4K only. In Henrik's system it has (1M-32K) as
last usable rage is [mem 0x7f9db000-0x7fef8fff].

The problem is exposed when EFI booting have several holes and it
will force mapping to use PTE instead as we only map usable areas.

To fix it, just make it be 2M aligned, so we can be guaranteed to be
able to use large pages to map it.

Reported-by: Henrik Rydberg <rydberg@euromail.se>
Bisected-by: Henrik Rydberg <rydberg@euromail.se>
Tested-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/CAE9FiQX4nQ7_1kg5RL_vh56rmcSHXUi1ExrZX7CwED4NGMnHfg@mail.gmail.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2013-03-06 20:18:32 -08:00
Krzysztof Mazur 015221fefb x86: Fix 32-bit *_cpu_data initializers
The commit 27be457000
('x86 idle: remove 32-bit-only "no-hlt" parameter, hlt_works_ok
flag') removed the hlt_works_ok flag from struct cpuinfo_x86, but
boot_cpu_data and new_cpu_data initializers were not changed
causing setting f00f_bug flag, instead of fdiv_bug.

If CONFIG_X86_F00F_BUG is not set the f00f_bug flag is never
cleared.

To avoid such problems in future C99-style initialization is now
used.

Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: len.brown@intel.com
Link: http://lkml.kernel.org/r/1362266082-2227-1-git-send-email-krzysiek@podlesie.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2013-03-06 20:15:50 -08:00
Maxime Ripard 4a38a8502b ARM: mxs: cfa10049: Fix fb initialisation function
Commit 1fe42740 ("ARM: dts: mxs: Add the LCD to the 10049 board") seem
to have been applied with some fuzzyness, and the framebuffer
initialisation code for the CFA-10049 ended up in the CFA-10037
initialisation function.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-07 10:54:23 +08:00
Padmavathi Venna 0a96d4d369 ARM: EXYNOS: Add #dma-cells for generic dma binding support for PL330
This patch adds #dma-cells property to PL330 DMA controller
nodes for supporting generic dma dt bindings on samsung exynos
platforms. #dma-channels and #dma-requests are not required now
but added in advance.

Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-07 10:33:07 +09:00
Stephen Boyd 44d6b1fc3e ARM: 7667/1: perf: Fix section mismatch on armpmu_init()
WARNING: vmlinux.o(.text+0xfb80): Section mismatch in reference
from the function armpmu_register() to the function
.init.text:armpmu_init()
The function armpmu_register() references
the function __init armpmu_init().
This is often because armpmu_register lacks a __init
annotation or the annotation of armpmu_init is wrong.

Just drop the __init marking on armpmu_init() because
armpmu_register() no longer has an __init marking.

Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-06 23:45:43 +00:00
Jonathan Austin b8083f86e8 ARM: 7666/1: decompressor: add -mno-single-pic-base for building the decompressor
Before jumping to (position independent) C-code from the decompressor's
assembler world we set-up the C environment. This setup currently does not
set r9, which for arm-none-uclinux-uclibceabi toolchains is by default
expected to be the PIC offset base register (IE should point to the
beginning of the GOT).

Currently, therefore, in order to build working kernels that use the
decompressor it is necessary to use an arm-linux-gnueabi toolchain, or
similar. uClinux toolchains cause a prefetch abort to occur at the beginning
of the decompress_kernel function.

This patch allows uClinux toolchains to build bootable zImages by forcing
the -mno-single-pic-base option, which ensures that the location of the GOT
is re-derived each time it is required, and r9 becomes free for use as a
general purpose register.

This has a small (4% in instruction terms) advantage over the alternative of
setting r9 to point to the GOT before calling into the C-world.

Signed-off-by: Jonathan Austin <jonathan.austin@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-06 23:45:42 +00:00
Paul Bolle ef9240f482 m68k: drop "select EMAC_INC"
Somehow this select statement managed to squeeze itself between commit
0e152d8050 ("m68k: reorganize Kconfig
options to improve mmu/non-mmu selections") and commit
95e82747d6 ("m68k: drop unused Kconfig
symbols"). Whatever happened, there is no Kconfig symbol named EMAC_INC.
The select statement for that symbol is a nop. Drop it.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2013-03-06 16:08:26 +10:00
Borislav Petkov 576cfb404c x86, smpboot: Remove unused variable
The cpuinfo_x86 ptr is unused now. Drop it. Got obsolete by 69fb3676df
("x86 idle: remove mwait_idle() and "idle=mwait" cmdline param")
removing its only user.

[ hpa: fixes gcc warning ]

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1362428180-8865-2-git-send-email-bp@alien8.de
Cc: Len Brown <len.brown@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-03-05 15:26:45 -08:00
Paul Bolle 51c66cf969 ARM: SPEAr13xx: Fix typo "ARCH_HAVE_CPUFREQ"
Do what commit f12a500e4a
("ARM: SPEAr13xx: Enable CONFIG_ARCH_HAS_CPUFREQ") wanted to do.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-05 23:30:24 +01:00
Arnd Bergmann f01c28794c Fix few regressions, omap3 pm init with device tree, and some
issues with the legacy mux code.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRNiKhAAoJEBvUPslcq6VzYK0QAIIFi/d32aHfA9cLmk8tpyH+
 61wJPyVPyaiCLyhloVUghTD3UWLkdVtabroIUAGZp9glnolxUbTcl1dLSvM3R5tp
 qZ04zIo7It052kA7U4szu5JCTBeuPxfKYxR8ATS8vqIRCZrJIncbAjoa5x/1+eog
 BBnIRtm7Wa3Z8gJl7o548k5BlBFVXrAYmArhUqfse2y3o5k+GCX9Nb29HJZDYkgN
 O0NiVd1rRLmgtNWC6yHtktpPOgxwIUEavCahfp0wkAsHzwN+8DvaRhxjdtggvbVA
 ui9PEyawEJx+MOoJ4R6hlF+ZbgMyOzaNGWEF0ed2/waql4ZKaBCcrFieS3903c88
 oJeAwq5+2AkGu3rSI+kO0s6q2Da5zTXwfFDpCXjR4IOdBxt+mbBpcenGTTbpqQSe
 dBJAajygljAkFaJyW+Z8gjca0qROVNeNQcS8Zb4kcJd4SqBPL4oDReW0/k9rOE9s
 CLiPEDMDKaoEiwnhH4YWb22WwoGN7/jglbJQ4MIM3rALP2BvSO+/OBNNuF9qB+JQ
 4xlFpD/6dlJi042vUXPM0hFGngmJEACAfrX13xlE/M1VBNVaubWbHe6kFo0AGp0t
 KZ3dm1xSULBB9zjNm7iNtiDyXJWnBWjv5le032vyYz+l4x0+GjO7SK7+n2vepgoB
 vMVVlr1KQbh7za3CbShy
 =4y13
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v3.9-rc1/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Fix few regressions, omap3 pm init with device tree, and some
issues with the legacy mux code.

* tag 'omap-for-v3.9-rc1/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP: RX-51: add missing USB phy binding
  ARM: OMAP2+: Remove duplicate omap4430_init_late() declaration
  ARM: OMAP2+: mux: correct wrong error messages
  ARM: OMAP2+: mux: fix debugfs file permission
  ARM: OMAP2+: Fix unmet direct dependencies for zoom for 8250 serial
  ARM: OMAP3: board-generic: Add missing omap3_init_late
  ARM: OMAP2+: Fix broken gpmc support
  ARM: OMAP1: Fix build related to kgdb.h no longer including serial_8250.h
2013-03-05 23:22:00 +01:00
Aaro Koskinen b0ad0995e9 ARM: OMAP: RX-51: add missing USB phy binding
Commit 51482be9 (ARM: OMAP: USB: Add phy binding information) forgot to
add phy binding for RX-51, and as a result USB does not work anymore on
3.9-rc1. Add the missing binding.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-03-05 08:24:56 -08:00
Heiko Carstens f6a70a0707 s390/mm: fix flush_tlb_kernel_range()
Our flush_tlb_kernel_range() implementation calls __tlb_flush_mm() with
&init_mm as argument. __tlb_flush_mm() however will only flush tlbs
for the passed in mm if its mm_cpumask is not empty.

For the init_mm however its mm_cpumask has never any bits set. Which in
turn means that our flush_tlb_kernel_range() implementation doesn't
work at all.

This can be easily verified with a vmalloc/vfree loop which allocates
a page, writes to it and then frees the page again. A crash will follow
almost instantly.

To fix this remove the cpumask_empty() check in __tlb_flush_mm() since
there shouldn't be too many mms with a zero mm_cpumask, besides the
init_mm of course.

Cc: stable@vger.kernel.org
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-03-05 10:21:36 +01:00
Heiko Carstens a7bb1ae749 s390/mm: fix vmemmap size calculation
The size of the vmemmap must be a multiple of PAGES_PER_SECTION, since the
common code always initializes the vmemmap in such pieces.
So we must round up in order to not have a too small vmemmap.

Fixes an IPL crash on 31 bit with more than 1920MB.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-03-05 10:21:35 +01:00
Martin Schwidefsky 6551fbdfd8 s390: critical section cleanup vs. machine checks
The current machine check code uses the registers stored by the machine
in the lowcore at __LC_GPREGS_SAVE_AREA as the registers of the interrupted
context. The registers 0-7 of a user process can get clobbered if a machine
checks interrupts the execution of a critical section in entry[64].S.

The reason is that the critical section cleanup code may need to modify
the PSW and the registers for the previous context to get to the end of a
critical section. If registers 0-7 have to be replaced the relevant copy
will be in the registers, which invalidates the copy in the lowcore. The
machine check handler needs to explicitly store registers 0-7 to the stack.

Cc: stable@vger.kernel.org
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-03-05 10:21:35 +01:00
Michael Neuling 54c9b2253d powerpc: Set DSCR bit in FSCR setup
We support DSCR (Data Stream Control Register) so we should make sure we set it
in the FSCR (Facility Status & Control Register) incase some firmwares don't
set it.  If we don't set this, we'll take a facility unavailable exception when
using the DSCR.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-03-05 16:56:30 +11:00
Michael Neuling fa759e9b09 powerpc: Add DSCR FSCR register bit definition
This sets the DSCR (Data Stream Control Register) in the FSCR (Facility Status
& Control Register).

Also harmonise TAR (Target Address Register) FSCR bit definition too.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-03-05 16:56:30 +11:00
Michael Neuling 57d231678a powerpc: Fix setting FSCR for HV=0 and on secondary CPUs
Currently we only set the FSCR (Facility Status and Control Register) when HV=1
but this feature is available when HV=0 also.  This patch sets FSCR when HV=0.

Also, we currently only set the FSCR on the master CPU.  This patch also sets
the FSCR on secondary CPUs.

Signed-off-by: Michael Neuling <mikey@neuling.org>
cc: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-03-05 16:56:29 +11:00
Tony Breeds 8170a83f15 powerpc: Wireup the kcmp syscall to sys_ni
Since kmp takes 2 unsigned long args there should be a compat wrapper.
Since one isn't provided I think it's safer just to hook this up to not
implemented.  If we need it later we can do it properly then.

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-03-05 16:56:29 +11:00
Akinobu Mita a74f350b5c powerpc: Remove unused BITOP_LE_SWIZZLE macro
The BITOP_LE_SWIZZLE macro was used in the little-endian bitops functions
for powerpc.  But these functions were converted to generic bitops and
the BITOP_LE_SWIZZLE is not used anymore.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-03-05 16:56:28 +11:00
Michael Neuling 6a404806df powerpc: Avoid link stack corruption in MMU on syscall entry path
Currently we use the link register to branch up high in the early MMU on
syscall entry path.  Unfortunately, this trashes the link stack as the
address we are going to is not associated with the earlier mflr.

This patch simply converts us to used the count register (volatile over
syscalls anyway) instead.  This is much better at predicting in this
scenario and doesn't trash link stack causing a bunch of additional
branch mispredicts later.  Benchmarking this on POWER8 saves a bunch of
cycles on Anton's null syscall benchmark here:
   http://ozlabs.org/~anton/junkcode/null_syscall.c

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-03-05 16:56:28 +11:00
Chen Gang 6b6680c4ea powerpc/pseries/hvcserver: Fix strncpy buffer limit in location code
the dest buf len is 80 (HVCS_CLC_LENGTH + 1).
  the src buf len is PAGE_SIZE.
  if src buf string len is more than 80, it will cause issue.

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-03-05 16:56:27 +11:00
Tony Breeds 27777890d0 powerpc: Fix compile of sha1-powerpc-asm.S on 32-bit
When building with CRYPTO_SHA1_PPC enabled we fail with:

powerpc/crypto/sha1-powerpc-asm.S: Assembler messages:
powerpc/crypto/sha1-powerpc-asm.S:116: Error: can't resolve `0' {*ABS* section} - `STACKFRAMESIZE' {*UND* section}
powerpc/crypto/sha1-powerpc-asm.S:116: Error: expression too complex
powerpc/crypto/sha1-powerpc-asm.S:178: Error: unsupported relocation against STACKFRAMESIZE

Use INT_FRAME_SIZE instead of STACKFRAMESIZE.

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Tested-by: Christian Kujau <lists@nerdbynature.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-03-05 16:56:26 +11:00
Sylwester Nawrocki b83e831a3c ARM: S5PV210: Fix PL330 DMA controller clkdev entries
Since the DMA controller clocks are managed at amba bus level, the
PL330 device clocks handling has been removed from the driver in
commit 7c71b8eb("DMA: PL330: Remove redundant runtime_suspend/
resume functions")

However, this left the S5PV210 platform with only clkdev entries
linking "apb_pclk" clock conn_id to a dummy clock, rather than
to corresponding platform PL330 DMAC clock.
As a result the DMA controller is now attempted to be used on
S5PV210 with the clock disabled and the driver fails with an
error:

dma-pl330 dma-pl330.0: PERIPH_ID 0x0, PCELL_ID 0x0 !
dma-pl330: probe of dma-pl330.0 failed with error -22
dma-pl330 dma-pl330.1: PERIPH_ID 0x0, PCELL_ID 0x0 !
dma-pl330: probe of dma-pl330.1 failed with error -22

Fix this by adding "apb_pclk" clkdev entries for the Peripheral
DMA controllers 0/1 and removing the dummy apb_pclk clock.

Reported-by: Lonsn <lonsn2005@gmail.com>
Tested-by: Lonsn <lonsn2005@gmail.com>
Cc: Inderpal Singh <inderpal.singh@linaro.org>
Cc: Boojin Kim <boojin.kim@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: <stable@vger.kernel.org> # v3.7+
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-05 11:08:47 +09:00
Olof Johansson 4246a9c968 The mxs fixes for 3.9:
- A few sparse warning fixes
  - Fix usb function regression caused by usb Kconfig option changes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJRNELIAAoJEFBXWFqHsHzOP/QH/jjE9MrvckPwb8h1I7R8a7yc
 td3N5rikKiy2XN4snjIrPFaKi9JQ//I1oLvhsXNSD1uqWqqtRLg6lxzIdiheUJEd
 NsAFLKTPMaJHJ/s3y0mLNRgyuBcyvDrF6jYJ8ncdGDCMAXBKifkTmrqqai2d0dZz
 DiIiEW46PVhsQkoxdnLKw7xGScmXJpyqwshbi+zhAB17yE1FBLCCsZGD1jVr0v/y
 Q6pnCjiJ8es9SAvmCvZ8cY1XxOxUMsCr2VhIy/QPF5HyuZPcRaV1nVGljfzo13J3
 sPvBfmUZaY9ezqOVCUuYatQ3bAQ5f55KsLuGz+IHwMLHllXAML0Fw69/oDR86qs=
 =JOus
 -----END PGP SIGNATURE-----

Merge tag 'mxs-fixes-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6 into fixes

From Shawn Guo:
The mxs fixes for 3.9:
 - A few sparse warning fixes
 - Fix usb function regression caused by usb Kconfig option changes

* tag 'mxs-fixes-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: mxs: ocotp: Fix sparse warning
  ARM: mxs: icoll: Fix sparse warning
  ARM: mxs: mm: Fix sparse warning
  ARM: mxs_defconfig: Make USB host functional again

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-03-04 17:35:15 -08:00
Olof Johansson 260a8e507a The imx fixes for 3.9:
- move early resume code out of .data section to fix allyesconfig
    failure since c08e20d (arm: Add v7_invalidate_l1 to cache-v7.S)
    gets merged
  - Fix incorrect DISP1_DAT_21 number in imx53-mba53 disp1-grp1
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJRND3rAAoJEFBXWFqHsHzOL2cH/je/02JztrorpD2k76mQLjo4
 2hjfUwpYNvwEpwBCXo5NnDv5I4XrkJdHs7O2CHmigQOpDYSvq9qx3VcPQ0BX8cWU
 3Qqb9tiglNsvD2NuxUYmG2CHFpGLp+lK3unkA/ZDXM2apjbacL1/wTgU81uthDwY
 SLBBS7hSlBvuPdxoeIBeuOOBYnhbdaZCutgFVTF8rRT6RHmYjekga6OqF32Vp/og
 Gxw50cj+smdW6wr1Na0zQJfMHTkm5hJ9s9iYHAbYNZplpl8VZJQAaCWgZhihZJYI
 XULUCR0s8DLLUgj4IUgJS3Kc35G/2M1ovhxyw3hqDzOt+Miy8m4eYh21BL2iS8w=
 =V76T
 -----END PGP SIGNATURE-----

Merge tag 'imx-fixes-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6 into fixes

From Shawn Guo:
The imx fixes for 3.9:
 - move early resume code out of .data section to fix allyesconfig
   failure since c08e20d (arm: Add v7_invalidate_l1 to cache-v7.S)
   gets merged
 - Fix incorrect DISP1_DAT_21 number in imx53-mba53 disp1-grp1

* tag 'imx-fixes-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: dts: imx53-mba53: fix fsl,pins for disp1-grp1
  ARM: mach-imx: move early resume code out of the .data section

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-03-04 17:35:01 -08:00
Prashant Gaikwad ed3ced3711 ARM: Tegra: Add clock entry for smp_twd clock
As DT support for clocks and smp_twd is enabled, add clock entry
for smp_twd clock to DT.

This fixes the following error while booting the kernel:
smp_twd: clock not found -2

Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com>
[swarren: include kernel log spew that this fixes]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-03-04 17:16:36 -08:00
Nishanth Menon 9e25fe6b33 ARM: dts: remove generated .dtb files on clean
commit 5f300acd8a
(ARM: 7152/1: distclean: Remove generated .dtb files)
ensured that dtbs were cleaned up when they were in
arch/arm/boot.
However, with the following commit:
commit 499cd82986
(ARM: dt: change .dtb build rules to build in dts directory)

make clean now leaves dtbs in arch/arm/boot/dts/
untouched. Include dts directory so that clean-files rule
from arch/arm/boot/dts/Makefile is invoked when make
clean is done.

Cc: Dirk Behme <dirk.behme@de.bosch.com>
CC: Grant Likely <grant.likely@secretlab.ca>

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-03-04 17:15:35 -08:00
Stephen Warren 2837a1d416 ARM: bcm2835: fix I2C module clock rate
BCM2835-ARM-Peripherals.pdf states that the I2C module's input clock is
nominally 150MHz, and that value is currently reflected in bcm2835.dtsi.
However, practical measurements show that the rate is actually 250MHz,
and this agrees with various downstream kernels.

Switch the I2C clock's frequency to 250MHz so that the generated bus
clock rate is accurate.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-03-04 17:15:34 -08:00
Santosh Shilimkar 08913c2d24 ARM: OMAP2+: Remove duplicate omap4430_init_late() declaration
Commit bbd707ac {ARM: omap2: use machine specific hook for late init}
accidentally added two declarations for omap4430_init_late().

Remove the duplicate declaration.

Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-03-04 11:37:31 -08:00
Ruslan Bilovol 39bb356ee6 ARM: OMAP2+: mux: correct wrong error messages
This is needed because the omap_mux_get_by_name()
function calls the _omap_mux_get_by_name subfunction
for each mux partition until needed mux is not found.
As a result, we get messages like
"Could not find signal XXX" for each partition
where this mux name does not exist.

This patch fixes wrong error message in
the _omap_mux_get_by_name() function moving it
to the omap_mux_get_by_name() one and as result
reduces noise in the kernel log.

My kernel log without this patch:
[...]
[    0.221801] omap_mux_init: Add partition: #2: wkup, flags: 3
[    0.222045] _omap_mux_get_by_name: Could not find signal fref_clk0_out.sys_drm_msecure
[    0.222137] _omap_mux_get_by_name: Could not find signal sys_nirq
[    0.222167] _omap_mux_get_by_name: Could not find signal sys_nirq
[    0.225006] _omap_mux_get_by_name: Could not find signal uart1_rx.uart1_rx
[    0.225006] _omap_mux_get_by_name: Could not find signal uart1_rx.uart1_rx
[    0.270111] _omap_mux_get_by_name: Could not find signal fref_clk4_out.fref_clk4_out
[    0.273406] twl: not initialized

[...]

My kernel log with this patch:
[...]
[    0.221771] omap_mux_init: Add partition: #2: wkup, flags: 3
[    0.222106] omap_mux_get_by_name: Could not find signal sys_nirq
[    0.224945] omap_mux_get_by_name: Could not find signal uart1_rx.uart1_rx
[    0.274536] twl: not initialized
[...]

Signed-off-by: Ruslan Bilovol <ruslan.bilovol@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-03-04 11:37:31 -08:00
Felipe Balbi 0fa26ce9f3 ARM: OMAP2+: mux: fix debugfs file permission
OMAP's debugfs interface creates one file
for each signal in the mux table, such file
provides a read method but didn't provide
read permission. Fix it.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-03-04 11:19:23 -08:00
Tony Lindgren 8a6201b9ea ARM: OMAP2+: Fix unmet direct dependencies for zoom for 8250 serial
We should not select drivers from kconfig as they should by default
be optional. Otherwise we'll be chasing broken dependencies forever:

warning: (MACH_OMAP_ZOOM2 && MACH_OMAP_ZOOM3 && MWAVE) selects SERIAL_8250
which has unmet direct dependencies (TTY && HAS_IOMEM && GENERIC_HARDIRQS)

Fix the issue by removing the selects for zoom and add them to
omap2plus_defconfig.

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-03-04 11:19:22 -08:00
Rajendra Nayak 990fa4f537 ARM: OMAP3: board-generic: Add missing omap3_init_late
The .init_late callback for OMAP3 has been missing for DT
builds, which causes a lot of late PM initializations to
be missed in turn.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-03-04 11:18:49 -08:00
Jon Hunter 31d9adca82 ARM: OMAP2+: Fix broken gpmc support
Commit 6797b4fe (ARM: OMAP2+: Prevent potential crash if GPMC probe fails)
added code to ensure that GPMC chip-selects could not be requested until the
device probe was successful. The chip-selects should have been
unreserved at the end of the probe function, but the code to unreserve
them appears to have ended up in the gpmc_calc_timings() function and
hence, this is causing problems requesting chip-selects. Fix this merge
error by unreserving the chip-selects at the end of the probe, but
before we call the gpmc child probe functions (for device-tree) which
request a chip-select.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Tested-by: Philip Avinash <avinashphilip@ti.com>
Tested-by: Grazvydas Ignotas <notasas@gmail.com>
[tony@atomide.com: updated description to add breaking commit id]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-03-04 11:12:16 -08:00
Tony Lindgren 0adcbaf78f ARM: OMAP1: Fix build related to kgdb.h no longer including serial_8250.h
Commit 16559ae4 (kgdb: remove #include <linux/serial_8250.h> from kgdb.h)
had a side effect of breaking omap1_defconfig build as some headers
were included indirectly:

arch/arm/mach-omap1/board-h2.c:249: error: ‘INT_KEYBOARD’ undeclared here (not in a function)
...

This worked earlier as linux/serial_8250.h included linux/serial_core.h,
via linux/serial_8250.h from linux/kgdb.h. Fix this by including the
necessary headers directly.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-03-04 11:12:16 -08:00
Chris Metcalf 87c319a2c3 tile: properly use COMPAT_SYSCALL_DEFINEx
This was pointed out by Al Viro.  Using the correct wrappers
properly does sign extension as necessary on syscall arguments.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-03-04 13:37:32 -05:00
Chris Metcalf 5a114b9866 tile: work around bug in the generic sys_llseek
sys_llseek should specify the high and low 32-bit seek values as "unsigned
int" but instead it specifies "unsigned long".  Since compat syscall
arguments are always sign-extended on tile, this means that a seek value
of 0xffffffff will be incorrectly interpreted as a value of -1ULL.

To avoid the risk of breaking binary compatibility on architectures
that already use sys_llseek this way, we follow the same path as MIPS
and provide a wrapper override.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: stable@kernel.org [v3.6 onwards]
2013-03-04 11:19:09 -05:00
Paul Mundt 40f09f3cd6 metag: Inhibit NUMA balancing.
The metag NUMA implementation follows the SH model, using different nodes for
memories with different latencies. As such, we ensure that automated balancing
between nodes is inhibited, by way of the new ARCH_WANT_VARIABLE_LOCALITY.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-04 10:29:19 +00:00
James Hogan 0010aeed7b metag: remove SET_PERSONALITY()
Commit e72837e3e7 ("default
SET_PERSONALITY() in linux/elf.h").

The above commit moved the common definition of SET_PERSONALITY() in a
bunch of the arch headers to linux/elf.h. Metag shares that common
definition so remove it from arch/metag/include/asm/elf.h too.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-04 10:27:20 +00:00
Greg Ungerer 0371a1c5ae m68knommu: fix misnamed GPIO pin definition for ColdFire 528x CPU
Compiling for a ColdFire 528x CPU will result in:

arch/m68k/platform/coldfire/m528x.c: In function ‘m528x_uarts_init’:
arch/m68k/platform/coldfire/m528x.c:72: error: ‘MCF5282_GPIO_PUAPAR’ undeclared (first use in this function)
arch/m68k/platform/coldfire/m528x.c:72: error: (Each undeclared identifier is reported only once
arch/m68k/platform/coldfire/m528x.c:72: error: for each function it appears in.)

The MCF5282_GPIO_PUAPAR definition changed names in the ColdFire definitions
cleanup. It is now MCFGPIO_PUAPAR, so change it.

Not sure how this one got missed, 2 lines below it is the correct use of
this definition.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2013-03-04 15:19:31 +10:00
Eric W. Biederman 7f78e03513 fs: Limit sys_mount to only request filesystem modules.
Modify the request_module to prefix the file system type with "fs-"
and add aliases to all of the filesystems that can be built as modules
to match.

A common practice is to build all of the kernel code and leave code
that is not commonly needed as modules, with the result that many
users are exposed to any bug anywhere in the kernel.

Looking for filesystems with a fs- prefix limits the pool of possible
modules that can be loaded by mount to just filesystems trivially
making things safer with no real cost.

Using aliases means user space can control the policy of which
filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf
with blacklist and alias directives.  Allowing simple, safe,
well understood work-arounds to known problematic software.

This also addresses a rare but unfortunate problem where the filesystem
name is not the same as it's module name and module auto-loading
would not work.  While writing this patch I saw a handful of such
cases.  The most significant being autofs that lives in the module
autofs4.

This is relevant to user namespaces because we can reach the request
module in get_fs_type() without having any special permissions, and
people get uncomfortable when a user specified string (in this case
the filesystem type) goes all of the way to request_module.

After having looked at this issue I don't think there is any
particular reason to perform any filtering or permission checks beyond
making it clear in the module request that we want a filesystem
module.  The common pattern in the kernel is to call request_module()
without regards to the users permissions.  In general all a filesystem
module does once loaded is call register_filesystem() and go to sleep.
Which means there is not much attack surface exposed by loading a
filesytem module unless the filesystem is mounted.  In a user
namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT,
which most filesystems do not set today.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Reported-by: Kees Cook <keescook@google.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-03-03 19:36:31 -08:00
Fabio Estevam 95381f38c0 ARM: mxs: ocotp: Fix sparse warning
Include <mach/common.h> header to fix the following sparse warning:

arch/arm/mach-mxs/ocotp.c:33:11: warning: symbol 'mxs_get_ocotp' was not declared. Should it be static?

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-04 10:07:28 +08:00
Fabio Estevam f26b016e7a ARM: mxs: icoll: Fix sparse warning
Fix the following sparse warning:

arch/arm/mach-mxs/icoll.c:103:13: warning: symbol 'icoll_of_init' was not declared. Should it be static?

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-04 10:07:20 +08:00
Fabio Estevam bb39cdc52f ARM: mxs: mm: Fix sparse warning
Include <mach/common.h> header to fix the following sparse warnings:

arch/arm/mach-mxs/mm.c:43:13: warning: symbol 'mx23_map_io' was not declared. Should it be static?
arch/arm/mach-mxs/mm.c:48:13: warning: symbol 'mx28_map_io' was not declared. Should it be static?

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-04 10:07:13 +08:00
Fabio Estevam f6c49da98d ARM: mxs_defconfig: Make USB host functional again
commit 09f6ffde2e (USB: EHCI: fix build error by making ChipIdea host a normal
EHCI driver) introduced CONFIG_USB_EHCI_HCD as a dependency for USB_CHIPIDEA_HOST.

Select CONFIG_USB_EHCI_HCD, so that USB host can be functional again.

Cc: <stable@vger.kernel.org> # 3.8
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-04 09:48:56 +08:00
Shawn Guo 0545c798e9 ARM: dts: imx53-mba53: fix fsl,pins for disp1-grp1
According to fsl,imx53-pinctrl.txt, the pin number of DISP1_DAT_21
should be 545, while 543 is IPU_CSI0_D_3.  Along with the change,
one duplication of DISP1_DAT_0 in disp1-grp1 is removed.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-04 09:20:15 +08:00
Nicolas Pitre b4e6153704 ARM: mach-imx: move early resume code out of the .data section
Building the kernel with allyesconfig fails because the i.mx early
resume code located in the .data section is unable to fixup the bl
relocation as the branch target gets too far away.

The idea of having code in the .data section allows for easy access to
nearby data using relative addressing while the MMU is off. However it
is probably best to move the code back to the .text section where it
belongs and fixup the data access instead.  This solves the bl reloc
issue (at least until this becomes a general problem) and simplifies
the code as well.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-04 09:20:09 +08:00
Luis Alves e97e9c9816 m68knommu: fix MC68328.h defines
This patch fixes some broken #define's in the MC68328.h file.
Most of them are whitespaces and one is an incorrect define of TCN.

Signed-off-by: Luis Alves <ljalvs@gmail.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2013-03-04 11:08:50 +10:00
Thadeu Lima de Souza Cascardo be3f695cbe m68knommu: fix build when CPU is not coldfire
Commit dd1cb3a7c4 [merge MMU and non-MMU
versions of mm/init.c] unified mm/init.c for both MMU and non-MMU m68k
platforms. However, it broke when we build a non-MMU M68K Classic CPU kernel.

This fix builds a section that came from the MMU version only when we are
building a MMU kernel.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2013-03-04 11:08:39 +10:00
Luis Alves 1a62fe8d1b m68knommu: add CPU_NAME for 68000
This patch adds the correct CPU name.
Without this, it just displays UNKNOWN at boot time and at '/proc/cpuinfo'.

Signed-off-by: Luis Alves <ljalvs@gmail.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2013-03-04 11:08:29 +10:00
Cyrill Gorcunov 3f7d1fe108 ARM: 7665/1: Wire up kcmp syscall
Wire up kcmp syscall for ability to proceed checkpoint/restore
procedure on ARM platform.

Signed-off-by: Alexander Kartashov <alekskartashov@parallels.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-03 22:54:18 +00:00
Chen Gang e595ede605 ARM: 7664/1: perf: remove erroneous semicolon from event initialisation
Commit 9dcbf46655 ("ARM: perf: simplify __hw_perf_event_init err
handling") tidied up the error handling code for perf event
initialisation on ARM, but a copy-and-paste error left a dangling
semicolon at the end of an if statement.

This patch removes the broken semicolon, restoring the old group
validation semantics.

Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Dirk Behme <dirk.behme@gmail.com>
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-03 22:54:17 +00:00
Will Deacon f2fe09b055 ARM: 7663/1: perf: fix ARMv7 EVTYPE_MASK to include NSH bit
Masked out PMXEVTYPER.NSH means that we can't enable profiling at PL2,
regardless of the settings in the HDCR.

This patch fixes the broken mask.

Cc: <stable@vger.kernel.org>
Reported-by: Christoffer Dall <cdall@cs.columbia.edu>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-03 22:54:17 +00:00
Dietmar Eggemann 1a8e611874 ARM: 7662/1: hw_breakpoint: reset debug logic on secondary CPUs in s2ram resume
We must mask out the CPU_TASKS_FROZEN bit so that reset_ctrl_regs is
also called on a secondary CPU during s2ram resume, where only the boot
CPU will receive the PM_EXIT notification.

Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-03 22:54:16 +00:00
Will Deacon 89c7e4b8bb ARM: 7661/1: mm: perform explicit branch predictor maintenance when required
The ARM ARM requires branch predictor maintenance if, for a given ASID,
the instructions at a specific virtual address appear to change.

From the kernel's point of view, that means:

	- Changing the kernel's view of memory (e.g. switching to the
	  identity map)
	- ASID rollover (since ASIDs will be re-allocated to new tasks)

This patch adds explicit branch predictor maintenance when either of the
two conditions above are met.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-03 22:54:16 +00:00
Will Deacon 862c588f06 ARM: 7660/1: tlb: add branch predictor maintenance operations
The ARM architecture requires explicit branch predictor maintenance
when updating an instruction stream for a given virtual address. In
reality, this isn't so much of a burden because the branch predictor
is flushed during the cache maintenance required to make the new
instructions visible to the I-side of the processor.

However, there are still some cases where explicit flushing is required,
so add a local_bp_flush_all operation to deal with this.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-03 22:54:15 +00:00
Will Deacon 8a4e3a9ead ARM: 7659/1: mm: make mm->context.id an atomic64_t variable
mm->context.id is updated under asid_lock when a new ASID is allocated
to an mm_struct. However, it is also read without the lock when a task
is being scheduled and checking whether or not the current ASID
generation is up-to-date.

If two threads of the same process are being scheduled in parallel and
the bottom bits of the generation in their mm->context.id match the
current generation (that is, the mm_struct has not been used for ~2^24
rollovers) then the non-atomic, lockless access to mm->context.id may
yield the incorrect ASID.

This patch fixes this issue by making mm->context.id and atomic64_t,
ensuring that the generation is always read consistently. For code that
only requires access to the ASID bits (e.g. TLB flushing by mm), then
the value is accessed directly, which GCC converts to an ldrb.

Cc: <stable@vger.kernel.org> # 3.8
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-03 22:54:14 +00:00
Will Deacon 37f47e3d62 ARM: 7658/1: mm: fix race updating mm->context.id on ASID rollover
If a thread triggers an ASID rollover, other threads of the same process
must be made to wait until the mm->context.id for the shared mm_struct
has been updated to new generation and associated book-keeping (e.g.
TLB invalidation) has ben performed.

However, there is a *tiny* window where both mm->context.id and the
relevant active_asids entry are updated to the new generation, but the
TLB flush has not been performed, which could allow another thread to
return to userspace with a dirty TLB, potentially leading to data
corruption. In reality this will never occur because one CPU would need
to perform a context-switch in the time it takes another to do a couple
of atomic test/set operations but we should plug the race anyway.

This patch moves the active_asids update until after the potential TLB
flush on context-switch.

Cc: <stable@vger.kernel.org> # 3.8
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-03 22:54:13 +00:00
Will Deacon d61947a164 ARM: 7657/1: head: fix swapper and idmap population with LPAE and big-endian
The LPAE page table format uses 64-bit descriptors, so we need to take
endianness into account when populating the swapper and idmap tables
during early initialisation.

This patch ensures that we store the two words making up each page table
entry in the correct order when running big-endian.

Cc: <stable@vger.kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-03 22:54:13 +00:00
Shawn Guo 904464b91e ARM: 7655/1: smp_twd: make twd_local_timer_of_register() no-op for nosmp
When booting a SMP build kernel with nosmp on kernel cmdline, the
following fat warning will be hit.

------------[ cut here ]------------
WARNING: at arch/arm/kernel/smp_twd.c:345
twd_local_timer_of_register+0x7c/0x90()
twd_local_timer_of_register failed (-6)
Modules linked in:
Backtrace:
[<80011f14>] (dump_backtrace+0x0/0x10c) from [<8044dd30>]
(dump_stack+0x18/0x1c)
 r7:805e9f58 r6:805ba84c r5:80539331 r4:00000159
[<8044dd18>] (dump_stack+0x0/0x1c) from [<80020fbc>]
(warn_slowpath_common+0x54/0x6c)
[<80020f68>] (warn_slowpath_common+0x0/0x6c) from [<80021078>]
(warn_slowpath_fmt+0x38/0x40)
 r9:412fc09a r8:8fffffff r7:ffffffff r6:00000001 r5:80633b8c
r4:80b32da8
[<80021040>] (warn_slowpath_fmt+0x0/0x40) from [<805ba84]
(twd_local_timer_of_register+0x7c/0x90)
 r3:fffffffa r2:8053934b
[<805ba7d0>] (twd_local_timer_of_register+0x0/0x90) from [<805c0bec>]
(imx6q_timer_init+0x18/0x4c)
 r5:80633800 r4:8053b701
[<805c0bd4>] (imx6q_timer_init+0x0/0x4c) from [<805ba4e8>]
(time_init+0x28/0x38)
 r5:80633800 r4:805dc0f4
[<805ba4c0>] (time_init+0x0/0x38) from [<805b6854>]
(start_kernel+0x1a0/0x310)
[<805b66b4>] (start_kernel+0x0/0x310) from [<10008044>] (0x10008044)
 r8:1000406a r7:805f3f8c r6:805dc0c4 r5:805f0518 r4:10c5387d
---[ end trace 1b75b31a2719ed1c ]---

Check (!is_smp() || !setup_max_cpus) in twd_local_timer_of_register()
to make it be a no-op for the conditions, thus avoid above warning.

Reported-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-03 22:54:12 +00:00
Ben Dooks 78305c8630 ARM: 7652/1: mm: fix missing use of 'asid' to get asid value from mm->context.id
Fix missing use of the asid macro when getting the ASID from the mm->context.id field.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-03 22:54:12 +00:00
Linus Walleij 30a1b5ef0c ARM: 7642/1: netx: bump IRQ offset to 64
The Netx IRQs offset from zero, which is illegal, since Linux
IRQ 0 is NO_IRQ.

Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-03 22:54:11 +00:00
Linus Torvalds 8e8b180a5f Bug-fixes:
- Update the Xen ACPI memory and CPU hotplug locking mechanism.
  - Fix PAT issues wherein various applications would not start
  - Fix handling of multiple MSI as AHCI now does it.
  - Fix ARM compile failures.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQEcBAABAgAGBQJRMM+8AAoJEFjIrFwIi8fJnGsIANU/lVS5EwV6ZMP9GiVtbm68
 sBn0MoDIkN2ID16gcrQdfvzgtTQHsptL2fOl756veTHN2AIpIFYShKZpbgR9VM+c
 MpD68ltakkfjoVeb7F7yPbDvcSftKRW5VAq1SeFMc2gOOmiqAWQGgBC+3Cd04zFk
 SqzDs1RLUHypwBOFlZKa1ex/ShuYfzRb9x+J6zqGO+OpjhlMobyag8rhSlgehlfP
 6gS1IzmcH8a6SgBKZk/+YC+i+QLgPOyxiK6zcxa2rfc6iUwodpqBpKP1N+CS4lnu
 FIKOIIzzCwCEAq94wVV0GJwHyw7nsqjG8syfRyOPmauLrpOI70xrV+lYFMVVRA0=
 =HwzV
 -----END PGP SIGNATURE-----

Merge tag 'stable/for-linus-3.9-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull Xen bug-fixes from Konrad Rzeszutek Wilk:
 - Update the Xen ACPI memory and CPU hotplug locking mechanism.
 - Fix PAT issues wherein various applications would not start
 - Fix handling of multiple MSI as AHCI now does it.
 - Fix ARM compile failures.

* tag 'stable/for-linus-3.9-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xenbus: fix compile failure on ARM with Xen enabled
  xen/pci: We don't do multiple MSI's.
  xen/pat: Disable PAT using pat_enabled value.
  xen/acpi: xen cpu hotplug minor updates
  xen/acpi: xen memory hotplug minor updates
2013-03-03 14:22:53 -08:00
Linus Torvalds 56a79b7b02 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull  more VFS bits from Al Viro:
 "Unfortunately, it looks like xattr series will have to wait until the
  next cycle ;-/

  This pile contains 9p cleanups and fixes (races in v9fs_fid_add()
  etc), fixup for nommu breakage in shmem.c, several cleanups and a bit
  more file_inode() work"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  constify path_get/path_put and fs_struct.c stuff
  fix nommu breakage in shmem.c
  cache the value of file_inode() in struct file
  9p: if v9fs_fid_lookup() gets to asking server, it'd better have hashed dentry
  9p: make sure ->lookup() adds fid to the right dentry
  9p: untangle ->lookup() a bit
  9p: double iput() in ->lookup() if d_materialise_unique() fails
  9p: v9fs_fid_add() can't fail now
  v9fs: get rid of v9fs_dentry
  9p: turn fid->dlist into hlist
  9p: don't bother with private lock in ->d_fsdata; dentry->d_lock will do just fine
  more file_inode() open-coded instances
  selinux: opened file can't have NULL or negative ->f_path.dentry

(In the meantime, the hlist traversal macros have changed, so this
required a semantic conflict fixup for the newly hlistified fid->dlist)
2013-03-03 13:23:03 -08:00
Linus Torvalds 530ede14cf Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull second set of s390 patches from Martin Schwidefsky:
 "The main part of this merge are Heikos uaccess patches.  Together with
  commit 0988496433 ("mm: do not grow the stack vma just because of an
  overrun on preceding vma") the user string access is hopefully fixed
  for good.

  In addition some bug fixes and two cleanup patches."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/module: fix compile warning
  qdio: remove unused parameters
  s390/uaccess: fix kernel ds access for page table walk
  s390/uaccess: fix strncpy_from_user string length check
  input: disable i8042 PC Keyboard controller for s390
  s390/dis: Fix invalid array size
  s390/uaccess: remove pointless access_ok() checks
  s390/uaccess: fix strncpy_from_user/strnlen_user zero maxlen case
  s390/uaccess: shorten strncpy_from_user/strnlen_user
  s390/dasd: fix unresponsive device after all channel paths were lost
  s390/mm: ignore change bit for vmemmap
  s390/page table dumper: add support for change-recording override bit
2013-03-03 12:58:43 -08:00
Linus Torvalds 6977c6fc77 Merge branch 'fixes-for-3.9-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull second round of PARISC updates from Helge Deller:
 "The most important fix in this branch is the switch of io_setup,
  io_getevents and io_submit syscalls to use the available compat
  syscalls when running 32bit userspace on 64bit kernel.  Other than
  that it's mostly removal of compile warnings."

* 'fixes-for-3.9-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: fix redefinition of SET_PERSONALITY
  parisc: do not install modules when installing kernel
  parisc: fix compile warnings triggered by atomic_sub(sizeof(),v)
  parisc: check return value of down_interruptible() in hp_sdc_rtc.c
  parisc: avoid unitialized variable warning in pa_memcpy()
  parisc: remove unused variable 'compat_val'
  parisc: switch to compat_functions of io_setup, io_getevents and io_submit
  parisc: select ARCH_WANT_FRAME_POINTERS
2013-03-03 12:57:38 -08:00
Linus Torvalds 8fd5e7a2d9 ImgTec Meta architecture changes for v3.9-rc1
This adds core architecture support for Imagination's Meta processor
 cores, followed by some later miscellaneous arch/metag cleanups and
 fixes which I kept separate to ease review:
 
  - Support for basic Meta 1 (ATP) and Meta 2 (HTP) core architecture
  - A few fixes all over, particularly for symbol prefixes
  - A few privilege protection fixes
  - Several cleanups (setup.c includes, split out a lot of metag_ksyms.c)
  - Fix some missing exports
  - Convert hugetlb to use vm_unmapped_area()
  - Copy device tree to non-init memory
  - Provide dma_get_sgtable()
 
 Signed-off-by: James Hogan <james.hogan@imgtec.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQIcBAABAgAGBQJRMmVXAAoJEKHZs+irPybfivgP/inEXqJyfw59omQdjwvYcU/a
 /u0MJ3UKSNS3U+HknfaFCy/Nwk1dqPLjqqyVC1V6AbUPBXlaEwGcimlNRx2uRjdq
 Uh96upMLHsNuF/xiiR477g3RwY0egIJdM1R1bGi3mZ3vVrNQGF+wbni6f61xCWGz
 M/4rDglpQvE79oLhYdgj6tidZtHQT0YWtERA9W90zkQWXGYmpFPKBKbfZAi5+rKQ
 U6Gpg26orUugzXNaxltJEYKE8gjLTppEabx8DARnItZ4zCMy4dw5RBJ35RFvQw6e
 eSmfgTy9w9WqBMY2+QMSgU0KQt1IITCzX7OlOXC0jALQJXoU0WWbOELlBVQLCwF1
 T0OcR/5ZP/hIlOk5Dh+e9U3AtbASXdMtqA0ZUe78woH1CBf7Nc/0c0vRg23EdMh8
 lnHDJxT/UqskoOYLI4kgWbEdLDy4uTh19U2pVi7VCo7ksLB9Bj9Xc8VSKgscSXTl
 OwzN+c4Jgtu8FDFTp+Af4AT8pYGJ08j8L2ErsV2sOv3Q44U5WXdrMz3GSgwXj8+4
 wZk3HvdkQVkMD5sJCUZgAswaN6BnbB0pHdCz4wMQ8jR/Ogs015Ipk64Ecym9S/4n
 uES7PnDtt/4lb5EyX2ScbvdnZTAFTaaP7OOhC77BOQvbQjIW1tkAcxWJqRry86uS
 iM0BFgK6Ohx3geqa5Ft0
 =65cR
 -----END PGP SIGNATURE-----

Merge tag 'metag-v3.9-rc1-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag

Pull new ImgTec Meta architecture from James Hogan:
 "This adds core architecture support for Imagination's Meta processor
  cores, followed by some later miscellaneous arch/metag cleanups and
  fixes which I kept separate to ease review:

   - Support for basic Meta 1 (ATP) and Meta 2 (HTP) core architecture
   - A few fixes all over, particularly for symbol prefixes
   - A few privilege protection fixes
   - Several cleanups (setup.c includes, split out a lot of
     metag_ksyms.c)
   - Fix some missing exports
   - Convert hugetlb to use vm_unmapped_area()
   - Copy device tree to non-init memory
   - Provide dma_get_sgtable()"

* tag 'metag-v3.9-rc1-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: (61 commits)
  metag: Provide dma_get_sgtable()
  metag: prom.h: remove declaration of metag_dt_memblock_reserve()
  metag: copy devicetree to non-init memory
  metag: cleanup metag_ksyms.c includes
  metag: move mm/init.c exports out of metag_ksyms.c
  metag: move usercopy.c exports out of metag_ksyms.c
  metag: move setup.c exports out of metag_ksyms.c
  metag: move kick.c exports out of metag_ksyms.c
  metag: move traps.c exports out of metag_ksyms.c
  metag: move irq enable out of irqflags.h on SMP
  genksyms: fix metag symbol prefix on crc symbols
  metag: hugetlb: convert to vm_unmapped_area()
  metag: export clear_page and copy_page
  metag: export metag_code_cache_flush_all
  metag: protect more non-MMU memory regions
  metag: make TXPRIVEXT bits explicit
  metag: kernel/setup.c: sort includes
  perf: Enable building perf tools for Meta
  metag: add boot time LNKGET/LNKSET check
  metag: add __init to metag_cache_probe()
  ...
2013-03-03 12:06:09 -08:00
Linus Torvalds 529e5fbcd8 Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm
Pull late ARM updates from Russell King:
 "Here is the late set of ARM updates for this merge window; in here is:

   - The ARM parts of the broadcast timer support, core parts merged
     through tglx's tree.  This was left over from the previous merge to
     allow the dependency on tglx's tree to be resolved.

   - A fix to the VFP code which shows up on Raspberry Pi's, as well as
     fixing the fallout from a previous commit in this area.

   - A number of smaller fixes scattered throughout the ARM tree"

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: Fix broken commit 0cc41e4a21 corrupting kernel messages
  ARM: fix scheduling while atomic warning in alignment handling code
  ARM: VFP: fix emulation of second VFP instruction
  ARM: 7656/1: uImage: Error out on build of multiplatform without LOADADDR
  ARM: 7640/1: memory: tegra_ahb_enable_smmu() depends on TEGRA_IOMMU_SMMU
  ARM: 7654/1: Preserve L_PTE_VALID in pte_modify()
  ARM: 7653/2: do not scale loops_per_jiffy when using a constant delay clock
  ARM: 7651/1: remove unused smp_timer_broadcast #define
2013-03-03 11:54:39 -08:00
Linus Torvalds 68b86a2522 Merge git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
 "This contains:
   - fixes and improvements
   - devicetree bindings
   - conversion to watchdog generic framework of the following drivers:
        - booke_wdt
        - bcm47xx_wdt.c
        - at91sam9_wdt
   - Removal of old STMP3xxx driver
   - Addition of following new drivers:
        - new driver for STMP3xxx and i.MX23/28
        - Retu watchdog driver"

* git://www.linux-watchdog.org/linux-watchdog: (30 commits)
  watchdog: sp805_wdt depends on ARM
  watchdog: davinci_wdt: update to devm_* API
  watchdog: davinci_wdt: use devm managed clk get
  watchdog: at91rm9200: add DT support
  watchdog: add timeout-sec property binding
  watchdog: at91sam9_wdt: Convert to use the watchdog framework
  watchdog: omap_wdt: Add option nowayout
  watchdog: core: dt: add support for the timeout-sec dt property
  watchdog: bcm47xx_wdt.c: add hard timer
  watchdog: bcm47xx_wdt.c: rename wdt_time to timeout
  watchdog: bcm47xx_wdt.c: rename ops methods
  watchdog: bcm47xx_wdt.c: use platform device
  watchdog: bcm47xx_wdt.c: convert to watchdog core api
  watchdog: Convert BookE watchdog driver to watchdog infrastructure
  watchdog: s3c2410_wdt: Use devm_* functions
  watchdog: remove old STMP3xxx driver
  watchdog: add new driver for STMP3xxx and i.MX23/28
  rtc: stmp3xxx: add wdt-accessor function
  watchdog: introduce retu_wdt driver
  watchdog: intel_scu_watchdog: fix Kconfig dependency
  ...
2013-03-03 10:23:29 -08:00
Daniel Hellstrom a295642899 sparc,leon: fix GRPCI2 device0 PCI config space access
bus=0 slot=0 (device0) was used internally by the PCI host driver
to access the PCI host controller itself, however that had the
effect that PCI device0 was never accessible, which is wrong
when the motherboard has connected PCI AD16 signal to a slot.
A special case for accessing the PCI host controller itself is
added with this patch, by setting bus to TGT.

Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-02 22:36:09 -08:00
Russell King 16af43fef8 Merge branches 'devel-stable', 'fixes' and 'mmci' into for-linus 2013-03-03 00:32:50 +00:00
James Hogan c60ac31542 metag: Provide dma_get_sgtable()
metag/allmodconfig:

drivers/media/v4l2-core/videobuf2-dma-contig.c: In function 'vb2_dc_get_base_sgt':
drivers/media/v4l2-core/videobuf2-dma-contig.c:387: error: implicit declaration of function 'dma_get_sgtable'

For architectures using dma_map_ops, dma_get_sgtable() is provided in
<asm-generic/dma-mapping-common.h>.

Metag does not use dma_map_ops yet, hence it should implement it as an
inline stub using dma_common_get_sgtable().

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
2013-03-02 20:11:17 +00:00
James Hogan 2742c52655 metag: prom.h: remove declaration of metag_dt_memblock_reserve()
Metag doesn't have a metag_dt_memblock_reserve() function so remove the
declaration from asm/prom.h.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:11:17 +00:00
James Hogan 2270e6d30b metag: copy devicetree to non-init memory
Make a copy of the device tree blob in non-init memory. It is required
when using built-in device tree files that the platform code copies the
blob to non-init memory prior to calling unflatten_device_tree(),
otherwise the strings that the device tree refer to will get poisoned
and potentially reused, breaking later reading of the device tree
post-init (such as compatible matching in modules, debugfs, and the
procfs interface).

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Vineet Gupta <vgupta@synopsys.com>
2013-03-02 20:11:17 +00:00
James Hogan d790050448 metag: cleanup metag_ksyms.c includes
Minimise metag_ksyms.c includes to directly include the <asm/*.h> files
that declare a particular symbol, and not include any unnecessary ones.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:11:16 +00:00
James Hogan 44c2451080 metag: move mm/init.c exports out of metag_ksyms.c
It's less error prone to have function symbols exported immediately
after the function rather than in metag_ksyms.c. Move each EXPORT_SYMBOL
in metag_ksyms.c for symbols defined in mm/init.c into mm/init.c.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:11:16 +00:00
James Hogan 9da3ee9aa8 metag: move usercopy.c exports out of metag_ksyms.c
It's less error prone to have function symbols exported immediately
after the function rather than in metag_ksyms.c. Move each EXPORT_SYMBOL
in metag_ksyms.c for symbols defined in usercopy.c into usercopy.c

Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:11:15 +00:00
James Hogan 7293dbed9d metag: move setup.c exports out of metag_ksyms.c
It's less error prone to have function symbols exported immediately
after the function rather than in metag_ksyms.c. Move each EXPORT_SYMBOL
in metag_ksyms.c for symbols defined in setup.c into setup.c

Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:11:15 +00:00
James Hogan aa29ec5f79 metag: move kick.c exports out of metag_ksyms.c
It's less error prone to have function symbols exported immediately
after the function rather than in metag_ksyms.c. Move each EXPORT_SYMBOL
in metag_ksyms.c for symbols defined in kick.c into kick.c

Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:11:15 +00:00
James Hogan 9fb4aa8723 metag: move traps.c exports out of metag_ksyms.c
It's less error prone to have function symbols exported immediately
after the function rather than in metag_ksyms.c. Move each EXPORT_SYMBOL
in metag_ksyms.c for symbols defined in traps.c into traps.c

Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:11:14 +00:00
James Hogan fa771d029a metag: move irq enable out of irqflags.h on SMP
The SMP version of arch_local_irq_enable() uses preempt_disable(), but
<asm/irqflags.h> doesn't include <linux/preempt.h> causing the following
errors on SMP when pstore/ftrace is enabled (caught by buildbot smp
allyesconfig):

In file included from include/linux/irqflags.h:15,
                 from fs/pstore/ftrace.c:16:
arch/metag/include/asm/irqflags.h: In function 'arch_local_irq_enable':
arch/metag/include/asm/irqflags.h:84: error: implicit declaration of function 'preempt_disable'
arch/metag/include/asm/irqflags.h:86: error: implicit declaration of function 'preempt_enable_no_resched'

However <linux/preempt.h> cannot be easily included from
<asm/irqflags.h> as it can cause circular include dependencies in the
!SMP case, and potentially in the SMP case in the future. Therefore move
the SMP implementation of arch_local_irq_enable() into traps.c and use
an inline version of get_trigger_mask() which is also defined in traps.c
for SMP.

This adds an extra layer of function call / stack push when
preempt_disable needs to call other functions, however in the
non-preemptive SMP case it should be about as fast, as it was already
calling the get_trigger_mask() function which is now used inline.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:11:14 +00:00
James Hogan f75c28d896 metag: hugetlb: convert to vm_unmapped_area()
Convert hugetlb_get_unmapped_area_new_pmd() to use vm_unmapped_area()
rather than searching the virtual address space itself. This fixes the
following errors in linux-next due to the specified members being
removed after other architectures have already been converted:

arch/metag/mm/hugetlbpage.c: In function 'hugetlb_get_unmapped_area_new_pmd':
arch/metag/mm/hugetlbpage.c:199: error: 'struct mm_struct' has no member named 'cached_hole_size'
arch/metag/mm/hugetlbpage.c:200: error: 'struct mm_struct' has no member named 'free_area_cache'
arch/metag/mm/hugetlbpage.c:215: error: 'struct mm_struct' has no member named 'cached_hole_size'

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Michel Lespinasse <walken@google.com>
2013-03-02 20:11:13 +00:00
James Hogan c838e72a35 metag: export clear_page and copy_page
Various file systems use clear_page() and copy_page(), so when they're
built as modules we get build errors like the following:

ERROR: "clear_page" [fs/ntfs/ntfs.ko] undefined!
ERROR: "copy_page" [fs/nilfs2/nilfs2.ko] undefined!

Therefore export these functions to modules from metag_ksyms.c to fix
the errors. This was hit by a randconfig build.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:11:13 +00:00
James Hogan f626dc704e metag: export metag_code_cache_flush_all
Various file systems indirectly use metag_code_cache_flush_all(), so
when they're built as modules we get build errors like the following:

ERROR: "metag_code_cache_flush_all" [fs/xfs/xfs.ko] undefined!

Therefore export this function to modules to fix the errors. This was
hit by a randconfig build.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:11:12 +00:00
James Hogan 3d6b7bb0a2 metag: protect more non-MMU memory regions
Rename setup_txprivext() to setup_priv() and add initialisation of some
more per-thread privilege protection registers:

 - TxPRIVSYSR: 0x04400000-0x047fffff
               0x05000000-0x07ffffff
               0x84000000-0x87ffffff
 - TxPIOREG:   0x02000000-0x02ffffff
               0x04800000-0x048fffff
 - TxSYREG:    0x04000000-0x04000fff (except write fetch system event)

Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:09:58 +00:00
James Hogan c787c2d62f metag: make TXPRIVEXT bits explicit
Define PRIV_BITS using explicit constants from <asm/metag_regs.h> rather
than with a hard coded value. This also adds a couple of missing
definitions for the TXPRIVEXT priv bits for protecting writes to TXTIMER
and the trace registers.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:09:58 +00:00
James Hogan 82f0167aa4 metag: kernel/setup.c: sort includes
Sort includes in kernel/setup.c.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:09:57 +00:00
James Hogan 883a635591 metag: add boot time LNKGET/LNKSET check
Add boot time check for whether LNKGET/LNKSET go through or around the
cache. Depending on the configuration an info message (no harm), warning
(technically wrong but no harm), or big WARN (expect failure in either
kernel or userland) may be emitted if the behaviour is not as expected:

Configuration                                Hardware   Response
------------------------------------------   --------   --------
AROUND_CACHE                                 through    pr_info
!AROUND_CACHE && ATOMICITY_LNKGET            around     WARN (kernel)
     "        && !ATOMICITY_LNKGET && SMP    around     WARN (user)
     "                   "         && !SMP   around     pr_warn

Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:09:56 +00:00
James Hogan 0a38a8adc5 metag: add __init to metag_cache_probe()
metag_cache_probe() is only called from setup_arch(), so add the __init
attribute to it.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:09:56 +00:00
James Hogan ae85ac71b7 metag: Add JTAG Debug Adapter (DA) support
Add basic JTAG Debug Adapter (DA) support so that drivers which
communicate with the DA can detect whether one is actually present
(otherwise the target will halt indefinitely).

This allows the metag_da TTY driver and imgdafs filesystem driver to be
built, updates defconfigs, and sets up the metag_da console early if
it's configured in.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:09:56 +00:00
James Hogan 00512bdd45 metag: ftrace support
Add ftrace support for metag.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-02 20:09:55 +00:00
James Hogan 903b20ad68 metag: Perf
Add Perf support for metag.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2013-03-02 20:09:54 +00:00
James Hogan 5633004cc2 metag: Build infrastructure
Add metag build infrastructure.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:09:54 +00:00
James Hogan 1e57372eac metag: Various other headers
Add the remaining metag header files:
 - byteorder.h, swab.h (byte order and swapping)
 - barrier.h, cpu.h. hwthread.h, processor.h (hardware thread related)
 - bug.h, elf.h, gpio.h, linkage.h, resource.h (other)

Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:09:52 +00:00
James Hogan e8de3486a4 metag: Stack unwinding
Add stack unwinding support for metag.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:09:52 +00:00
James Hogan 086e9dc0e2 metag: Optimised library functions
Add optimised library functions for metag.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:09:52 +00:00
James Hogan f507758ccb metag: DMA
Add DMA mapping code.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:09:51 +00:00
James Hogan 42682c6c42 metag: SMP support
Add SMP support for metag. This allows Linux to take control of multiple
hardware threads on a single Meta core, treating them as separate Linux
CPUs.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:09:51 +00:00
James Hogan 6006c0d8ce metag: Atomics, locks and bitops
Add header files to implement Meta hardware thread locks (used by some
other atomic operations), atomics, spinlocks, and bitops.

There are 2 main types of atomic primitives for metag (in addition to
IRQs off on UP):
 - LOCK instructions provide locking between hardware threads.
 - LNKGET/LNKSET instructions provide load-linked/store-conditional
   operations allowing for lighter weight atomics on Meta2

LOCK instructions allow for hardware threads to acquire voluntary or
exclusive hardware thread locks:
 - LOCK0 releases exclusive and voluntary lock from the running hardware
   thread.
 - LOCK1 acquires the voluntary hardware lock, blocking until it becomes
   available.
 - LOCK2 implies LOCK1, and additionally acquires the exclusive hardware
   lock, blocking all other hardware threads from executing.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:09:50 +00:00
James Hogan 9b802d1f43 metag: Module support
Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:09:49 +00:00
James Hogan 44dea393cf metag: Scheduling/Process management
Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:09:49 +00:00
James Hogan 26025bbfbb metag: System Calls
Add metag system call and gateway page interfaces. The metag
architecture port uses the generic system call numbers from
asm-generic/unistd.h, as well as a user gateway page mapped at
0x6ffff000 which contains fast atomic primitives (depending on SMP) and
a fast method of accessing TLS data.

System calls use the SWITCH instruction with the immediate 0x440001 to
signal a system call.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:09:49 +00:00
James Hogan 5698c50d9d metag: Internal and external irqchips
Meta core internal interrupts (from HWSTATMETA and friends) are vectored
onto the TR1 core trigger for the current thread. This is demultiplexed
in irq-metag.c to individual Linux IRQs for each internal interrupt.

External SoC interrupts (from HWSTATEXT and friends) are vectored onto
the TR2 core trigger for the current thread. This is demultiplexed in
irq-metag-ext.c to individual Linux IRQs for each external SoC interrupt.
The external irqchip has devicetree bindings for configuring the number
of irq banks and the type of masking available.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Rob Landley <rob@landley.net>
Cc: Dom Cobley <popcornmix@gmail.com>
Cc: Simon Arlott <simon@fire.lp0.eu>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: devicetree-discuss@lists.ozlabs.org
Cc: linux-doc@vger.kernel.org
2013-03-02 20:09:48 +00:00
James Hogan 63047ea360 metag: IRQ handling
Add core IRQ handling for metag. The code in irq.c exposes the TBX
signal numbers as Linux IRQs.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:09:48 +00:00
James Hogan ac919f0883 metag: Traps
Add trap code for metag. At the lowest level Meta traps (and return from
interrupt instruction - RTI) simply swap the PC and PCX registers and
optionally toggle the interrupt status bit (ISTAT). Low level TBX code
in tbipcx.S handles the core context save, determine the TBX signal
number based on the core trigger that fired (using the TXSTATI status
register), and call TBX signal handlers (mostly in traps.c) via a vector
table.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
2013-03-02 20:09:45 +00:00
James Hogan a2c5d4ed92 metag: Time keeping
Add time keeping code for metag. Meta hardware threads have 2 timers.
The background timer (TXTIMER) is used as a free-running time base, and
the interrupt timer (TXTIMERI) is used for the timer interrupt. Both
counters traditionally count at approximately 1MHz.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: John Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
2013-03-02 20:09:22 +00:00
James Hogan bc3966bf15 metag: ptrace
The ptrace interface for metag provides access to some core register
sets using the PTRACE_GETREGSET and PTRACE_SETREGSET operations. The
details of the internal context structures is abstracted into user API
structures to both ease use and allow flexibility to change the internal
context layouts. Copyin and copyout functions for these register sets
are exposed to allow signal handling code to use them to copy to and
from the signal context.

struct user_gp_regs (NT_PRSTATUS) provides access to the core general
purpose register context.

struct user_cb_regs (NT_METAG_CBUF) provides access to the TXCATCH*
registers which contains information abuot a memory fault, unaligned
access error or watchpoint. This can be modified to alter the way the
fault is replayed on resume ("catch replay"), or to prevent the replay
taking place.

struct user_rp_state (NT_METAG_RPIPE) provides access to the state of
the Meta read pipeline which can be used to hide memory latencies in
hand optimised data loops.

Extended DSP register state, DSP RAM, and hardware breakpoint registers
aren't yet exposed through ptrace.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Tony Lindgren <tony@atomide.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
2013-03-02 20:09:22 +00:00
James Hogan 29dd78cf0b metag: Device tree
Add device tree files to arch/metag.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Vineet Gupta <vgupta@synopsys.com>
2013-03-02 20:09:22 +00:00
James Hogan 262d96b0de metag: Signal handling
Add signal handling code for metag.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
2013-03-02 20:09:21 +00:00
James Hogan c438b58e65 metag: TCM support
Add some TCM support

Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:09:21 +00:00
James Hogan bbc17704d5 metag: Highmem support
Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:09:20 +00:00
James Hogan e624e95bd8 metag: Huge TLB
Add huge TLB support to the metag architecture.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:09:20 +00:00
James Hogan 373cd784d0 metag: Memory handling
Meta has instructions for accessing:
 - bytes        - GETB (1 byte)
 - words        - GETW (2 bytes)
 - doublewords  - GETD (4 bytes)
 - longwords    - GETL (8 bytes)

All accesses must be aligned. Unaligned accesses can be detected and
made to fault on Meta2, however it isn't possible to fix up unaligned
writes so we don't bother fixing up reads either.

This patch adds metag memory handling code including:
 - I/O memory (io.h, ioremap.c): Actually any virtual memory can be
   accessed with these helpers. A part of the non-MMUable address space
   is used for memory mapped I/O. The ioremap() function is implemented
   one to one for non-MMUable addresses.
 - User memory (uaccess.h, usercopy.c): User memory is directly
   accessible from privileged code.
 - Kernel memory (maccess.c): probe_kernel_write() needs to be
   overwridden to use the I/O functions when doing a simple aligned
   write to non-writecombined memory, otherwise the write may be split
   by the generic version.

Note that due to the fact that a portion of the virtual address space is
non-MMUable, and therefore always maps directly to the physical address
space, metag specific I/O functions are made available (metag_in32,
metag_out32 etc). These cast the address argument to a pointer so that
they can be used with raw physical addresses. These accessors are only
to be used for accessing fixed core Meta architecture registers in the
non-MMU region, and not for any SoC/peripheral registers.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:09:19 +00:00
James Hogan f5df8e268f metag: Memory management
Add memory management files for metag.

Meta's 32bit virtual address space is split into two halves:
 - local (0x08000000-0x7fffffff): traditionally local to a hardware
   thread and incoherent between hardware threads. Each hardware thread
   has it's own local MMU table. On Meta2 the local space can be
   globally coherent (GCOn) if the cache partitions coincide.
 - global (0x88000000-0xffff0000): coherent and traditionally global
   between hardware threads. On Meta2, each hardware thread has it's own
   global MMU table.

The low 128MiB of each half is non-MMUable and maps directly to the
physical address space:
 - 0x00010000-0x07ffffff: contains Meta core registers and maps SoC bus
 - 0x80000000-0x87ffffff: contains low latency global core memories

Linux usually further splits the local virtual address space like this:
 - 0x08000000-0x3fffffff: user mappings
 - 0x40000000-0x7fffffff: kernel mappings

Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:09:19 +00:00
James Hogan 99ef7c2ac1 metag: Cache/TLB handling
Add cache and TLB handling code for metag, including the required
callbacks used by MM switches and DMA operations. Caches can be
partitioned between the hardware threads and the global space, however
this is usually configured by the bootloader so Linux doesn't make any
changes to this configuration. TLBs aren't configurable, so only need
consideration to flush them.

On Meta1 the L1 cache was VIVT which required a full flush on MM switch.
Meta2 has a VIPT L1 cache so it doesn't require the full flush on MM
switch. Meta2 can also have a writeback L2 with hardware prefetch which
requires some special handling. Support is optional, and the L2 can be
detected and initialised by Linux.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:09:19 +00:00
James Hogan 027f891f76 metag: TBX source
Add source files from the Thread Binary Interface (TBI) library which
provides useful low level operations and traps/context management.

Among other things it handles interrupt/exception/syscall entry (in
tbipcx.S).

Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:09:18 +00:00
James Hogan 4ca151b208 metag: TBX header
Add the main header for the Thread Binary Interface (TBI) library which
provides useful low level operations and trap/context management.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:09:18 +00:00
James Hogan 85d9d7a920 metag: Boot
Add boot code for metag. Due to the multi-threaded nature of Meta it is
not uncommon for an RTOS or bare metal application to be started on
other hardware threads by the bootloader. Since there is a single MMU
switch which affects all threads, the MMU is traditionally configured by
the bootloader prior to starting Linux. The bootloader passes a
structure to Linux which among other things contains information about
memory regions which have been mapped. Linux then assumes control of the
local heap memory region.

A kernel arguments string pointer or a flattened device tree pointer can
be provided in the third argument.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:09:17 +00:00
James Hogan 87aa1328f2 metag: Header for core memory mapped registers
Add the header <asm/metag_mem.h> describing addresses, fields, and bits
of various core memory mapped registers in the low non-MMU region.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:09:17 +00:00
James Hogan af8a10493e metag: Headers for core arch constants
Add a couple of header files containing core architecture constants.

The first (<asm/metag_isa.h>) contains some constants relating to the
instruction set, such as values to give to the CACHEW and CACHER
instructions.

The second (<asm/metag_regs.h>) contains constants for the core register
units directly accessible to various instructions, and for the
registers, fields, and bits in those units. The main units described are
the control unit (CT.*), the trigger unit (TR.*), and the run-time trace
unit (TT.*).

Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02 20:09:16 +00:00
James Hogan c19fa94a8f Add HAVE_64BIT_ALIGNED_ACCESS
On 64 bit architectures with no efficient unaligned access, padding and
explicit alignment must be added in various places to prevent unaligned
64bit accesses (such as taskstats and trace ring buffer).

However this also needs to apply to 32 bit architectures with 64 bit
accesses requiring alignment such as metag.

This is solved by adding a new Kconfig symbol HAVE_64BIT_ALIGNED_ACCESS
which defaults to 64BIT && !HAVE_EFFICIENT_UNALIGNED_ACCESS, and can be
explicitly selected by METAG and any other relevant architectures. This
can be used in various places to determine whether 64bit alignment is
required.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: Will Drewry <wad@chromium.org>
2013-03-02 20:09:15 +00:00
Helge Deller cf8e18ea2f parisc: fix redefinition of SET_PERSONALITY
commit e72837e3e7 introduced
a default SET_PERSONALITY() in include/linux/elf.h.
This breaks with our own SET_PERSONALITY define for
32bit userspace on 64bit kernel.

Signed-off-by: Helge Deller <deller@gmx.de>
2013-03-02 20:15:28 +01:00
Rolf Eike Beer 1905b7716c parisc: do not install modules when installing kernel
PA-RISC is the only arch that installs the modules when installing the kernel.

Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Helge Deller <deller@gmx.de>
2013-03-02 20:04:21 +01:00
Helge Deller 8527ed4a70 parisc: fix compile warnings triggered by atomic_sub(sizeof(),v)
This fixes compile warnings like this one:
net/ipv4/igmp.c: In function ‘ip_mc_leave_group’:
net/ipv4/igmp.c:1898:3: warning: overflow in implicit constant conversion [-Woverflow]

atomic_sub() is defined as __atomic_add_return(-(VAL),(v))))
and if VAL is of type unsigned int (as returned by sizeof()), negating
this value will overflow. Fix this by type-casting VAL to int type.

Signed-off-by: Helge Deller <deller@gmx.de>
2013-03-02 20:01:05 +01:00
Helge Deller d8d0524a39 parisc: avoid unitialized variable warning in pa_memcpy()
Avoid this warning, while still prevent gcc from optimizing away the exception code:
arch/parisc/lib/memcpy.c: In function ‘pa_memcpy’:
arch/parisc/lib/memcpy.c:256:2: warning: ‘dummy’ may be used uninitialized in this function [-Wuninitialized]

Signed-off-by: Helge Deller <deller@gmx.de>
2013-03-02 19:56:27 +01:00
Helge Deller 850df98434 parisc: remove unused variable 'compat_val'
clean up after commit 6e26aab98c
(switch to generic sigaltstack)

Signed-off-by: Helge Deller <deller@gmx.de>
2013-03-02 19:56:18 +01:00
Helge Deller 48139f8695 parisc: switch to compat_functions of io_setup, io_getevents and io_submit
Signed-off-by: Helge Deller <deller@gmx.de>
2013-03-02 19:56:08 +01:00
Helge Deller 4530c49e6d parisc: select ARCH_WANT_FRAME_POINTERS
Avoid the following warning when configuring the kernel for parisc:
warning: (LOCKDEP && FAULT_INJECTION_STACKTRACE_FILTER && LATENCYTOP && KMEMCHECK) selects FRAME_POINTER \
 which has unmet direct dependencies (DEBUG_KERNEL && (CRIS || M68K || FRV || UML || AVR32 || SUPERH ||  \
 BLACKFIN || MN10300) || ARCH_WANT_FRAME_POINTERS)

Signed-off-by: Helge Deller <deller@gmx.de>
2013-03-02 19:54:07 +01:00
Yinghai Lu 20e6926dcb x86, ACPI, mm: Revert movablemem_map support
Tim found:

  WARNING: at arch/x86/kernel/smpboot.c:324 topology_sane.isra.2+0x6f/0x80()
  Hardware name: S2600CP
  sched: CPU #1's llc-sibling CPU #0 is not on the same node! [node: 1 != 0]. Ignoring dependency.
  smpboot: Booting Node   1, Processors  #1
  Modules linked in:
  Pid: 0, comm: swapper/1 Not tainted 3.9.0-0-generic #1
  Call Trace:
    set_cpu_sibling_map+0x279/0x449
    start_secondary+0x11d/0x1e5

Don Morris reproduced on a HP z620 workstation, and bisected it to
commit e8d1955258 ("acpi, memory-hotplug: parse SRAT before memblock
is ready")

It turns out movable_map has some problems, and it breaks several things

1. numa_init is called several times, NOT just for srat. so those
	nodes_clear(numa_nodes_parsed)
	memset(&numa_meminfo, 0, sizeof(numa_meminfo))
   can not be just removed.  Need to consider sequence is: numaq, srat, amd, dummy.
   and make fall back path working.

2. simply split acpi_numa_init to early_parse_srat.
   a. that early_parse_srat is NOT called for ia64, so you break ia64.
   b.  for (i = 0; i < MAX_LOCAL_APIC; i++)
	     set_apicid_to_node(i, NUMA_NO_NODE)
     still left in numa_init. So it will just clear result from early_parse_srat.
     it should be moved before that....
   c.  it breaks ACPI_TABLE_OVERIDE...as the acpi table scan is moved
       early before override from INITRD is settled.

3. that patch TITLE is total misleading, there is NO x86 in the title,
   but it changes critical x86 code. It caused x86 guys did not
   pay attention to find the problem early. Those patches really should
   be routed via tip/x86/mm.

4. after that commit, following range can not use movable ram:
  a. real_mode code.... well..funny, legacy Node0 [0,1M) could be hot-removed?
  b. initrd... it will be freed after booting, so it could be on movable...
  c. crashkernel for kdump...: looks like we can not put kdump kernel above 4G
	anymore.
  d. init_mem_mapping: can not put page table high anymore.
  e. initmem_init: vmemmap can not be high local node anymore. That is
     not good.

If node is hotplugable, the mem related range like page table and
vmemmap could be on the that node without problem and should be on that
node.

We have workaround patch that could fix some problems, but some can not
be fixed.

So just remove that offending commit and related ones including:

 f7210e6c4a ("mm/memblock.c: use CONFIG_HAVE_MEMBLOCK_NODE_MAP to
    protect movablecore_map in memblock_overlaps_region().")

 01a178a94e ("acpi, memory-hotplug: support getting hotplug info from
    SRAT")

 27168d38fa ("acpi, memory-hotplug: extend movablemem_map ranges to
    the end of node")

 e8d1955258 ("acpi, memory-hotplug: parse SRAT before memblock is
    ready")

 fb06bc8e5f ("page_alloc: bootmem limit with movablecore_map")

 42f47e27e7 ("page_alloc: make movablemem_map have higher priority")

 6981ec3114 ("page_alloc: introduce zone_movable_limit[] to keep
    movable limit for nodes")

 34b71f1e04 ("page_alloc: add movable_memmap kernel parameter")

 4d59a75125 ("x86: get pg_data_t's memory from other node")

Later we should have patches that will make sure kernel put page table
and vmemmap on local node ram instead of push them down to node0.  Also
need to find way to put other kernel used ram to local node ram.

Reported-by: Tim Gardner <tim.gardner@canonical.com>
Reported-by: Don Morris <don.morris@hp.com>
Bisected-by: Don Morris <don.morris@hp.com>
Tested-by: Don Morris <don.morris@hp.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-02 09:34:39 -08:00
Linus Torvalds 14cc0b55b7 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal
Pull signal/compat fixes from Al Viro:
 "Fixes for several regressions introduced in the last signal.git pile,
  along with fixing bugs in truncate and ftruncate compat (on just about
  anything biarch at least one of those two had been done wrong)."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
  compat: restore timerfd settime and gettime compat syscalls
  [regression] braino in "sparc: convert to ksignal"
  fix compat truncate/ftruncate
  switch lseek to COMPAT_SYSCALL_DEFINE
  lseek() and truncate() on sparc really need sign extension
2013-03-02 08:34:06 -08:00
Linus Torvalds e23b62256a Initial ARC Linux port with some fixes on top for 3.9-rc1
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRMZYbAAoJEGnX8d3iisJeFj8P/R1hWohDDUc8pG3+ov9Y2Brt
 g7oIVw1udlKIk3HhVwsyT14/UHunfcTCONKKKGmmbfRrLJSMMsSlXvYoAQLozokf
 TuaO3Xt5IfERROqTrCDSwdNaAmwIZGsIuI9jWKo4qsXovAL0nc3sR527qMI1o7OE
 9X5eIqOJ/rPvOjXYrPqXmvO/DZKYG8PNTH4PYqePes31CsAmDXWBIlgYmgvF3th3
 ptwKPgRU/c2wKNpDDJXVQg/bcg9NI2cCnndNrjgXZgyUQrC37ZTdt/IOF5w6FgIW
 6i6UbDKXn8MgQAhrXx0Ns/+0kSJZ7eBWmj8hLyrxUzOYlF4rCs/il6ofDRaMO6fv
 9LmbNZXYnGICzm1YAxZRK7dm13IbDnltmMc81vISBpJSMTBgqzLWobHnq5/67Wh4
 2oUkoc2Tfaw70FnRCewX0x4Qop2YXmXl1KBwdecvzdcKi6Yg+rRH08ur/0yyCyx7
 +vAQpPVIuVqCc916qwmCPFaf1UMNnmMStxNH7D1AQHvi1G372NxfXizdYyKFRY9N
 f5Q+6DTo1xh2AxuGieSZxBoeK0Rlp4DWTOBD4MMz29y7BRX7LK1U2iS+nW0g8uir
 3RdYeAqyCxlJtjJNQX9U8ZT54jUPZgvJWU0udesRN1CBdOSQMjM9OyZsLLRtLeX1
 ww2tc7zqhBUyjBej6Itg
 =NKkW
 -----END PGP SIGNATURE-----

Merge tag 'arc-v3.9-rc1-late' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

Pull new ARC architecture from Vineet Gupta:
 "Initial ARC Linux port with some fixes on top for 3.9-rc1:

  I would like to introduce the Linux port to ARC Processors (from
  Synopsys) for 3.9-rc1.  The patch-set has been discussed on the public
  lists since Nov and has received a fair bit of review, specially from
  Arnd, tglx, Al and other subsystem maintainers for DeviceTree, kgdb...

  The arch bits are in arch/arc, some asm-generic changes (acked by
  Arnd), a minor change to PARISC (acked by Helge).

  The series is a touch bigger for a new port for 2 main reasons:

   1. It enables a basic kernel in first sub-series and adds
      ptrace/kgdb/.. later

   2. Some of the fallout of review (DeviceTree support, multi-platform-
      image support) were added on top of orig series, primarily to
      record the revision history.

  This updated pull request additionally contains

   - fixes due to our GNU tools catching up with the new syscall/ptrace
     ABI

   - some (minor) cross-arch Kconfig updates."

* tag 'arc-v3.9-rc1-late' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (82 commits)
  ARC: split elf.h into uapi and export it for userspace
  ARC: Fixup the current ABI version
  ARC: gdbserver using regset interface possibly broken
  ARC: Kconfig cleanup tracking cross-arch Kconfig pruning in merge window
  ARC: make a copy of flat DT
  ARC: [plat-arcfpga] DT arc-uart bindings change: "baud" => "current-speed"
  ARC: Ensure CONFIG_VIRT_TO_BUS is not enabled
  ARC: Fix pt_orig_r8 access
  ARC: [3.9] Fallout of hlist iterator update
  ARC: 64bit RTSC timestamp hardware issue
  ARC: Don't fiddle with non-existent caches
  ARC: Add self to MAINTAINERS
  ARC: Provide a default serial.h for uart drivers needing BASE_BAUD
  ARC: [plat-arcfpga] defconfig for fully loaded ARC Linux
  ARC: [Review] Multi-platform image #8: platform registers SMP callbacks
  ARC: [Review] Multi-platform image #7: SMP common code to use callbacks
  ARC: [Review] Multi-platform image #6: cpu-to-dma-addr optional
  ARC: [Review] Multi-platform image #5: NR_IRQS defined by ARC core
  ARC: [Review] Multi-platform image #4: Isolate platform headers
  ARC: [Review] Multi-platform image #3: switch to board callback
  ...
2013-03-02 07:58:56 -08:00
Linus Torvalds aebb2afd54 Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:

 o Add basic support for the Mediatek/Ralink Wireless SoC family.

 o The Qualcomm Atheros platform is extended by support for the new
   QCA955X SoC series as well as a bunch of patches that get the code
   ready for OF support.

 o Lantiq and BCM47XX platform have a few improvements and bug fixes.

 o MIPS has sent a few patches that get the kernel ready for the
   upcoming microMIPS support.

 o The rest of the series is made up of small bug fixes and cleanups
   that relate to various parts of the MIPS code.  The biggy in there is
   a whitespace cleanup.  After I was sent another set of whitespace
   cleanup patches I decided it was the time to clean the whitespace
   "issues" for once and and that touches many files below arch/mips/.

Fix up silly conflicts, mostly due to whitespace cleanups.

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (105 commits)
  MIPS: Quit exporting kernel internel break codes to uapi/asm/break.h
  MIPS: remove broken conditional inside vpe loader code
  MIPS: SMTC: fix implicit declaration of set_vi_handler
  MIPS: early_printk: drop __init annotations
  MIPS: Probe for and report hardware virtualization support.
  MIPS: ath79: add support for the Qualcomm Atheros AP136-010 board
  MIPS: ath79: add USB controller registration code for the QCA955X SoCs
  MIPS: ath79: add PCI controller registration code for the QCA955X SoCs
  MIPS: ath79: add WMAC registration code for the QCA955X SoCs
  MIPS: ath79: register UART for the QCA955X SoCs
  MIPS: ath79: add QCA955X specific glue to ath79_device_reset_{set, clear}
  MIPS: ath79: add GPIO setup code for the QCA955X SoCs
  MIPS: ath79: add IRQ handling code for the QCA955X SoCs
  MIPS: ath79: add clock setup code for the QCA955X SoCs
  MIPS: ath79: add SoC detection code for the QCA955X SoCs
  MIPS: ath79: add early printk support for the QCA955X SoCs
  MIPS: ath79: fix WMAC IRQ resource assignment
  mips: reserve elfcorehdr
  mips: Make sure kernel memory is in iomem
  MIPS: ath79: use dynamically allocated USB platform devices
  ...
2013-03-02 07:44:16 -08:00
Al Viro dfbb83d32c [regression] braino in "sparc: convert to ksignal"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-02 02:55:16 -05:00
Russell King ded3ef0fa7 ARM: Fix broken commit 0cc41e4a21 corrupting kernel messages
Commit 0cc41e4a21 (arch: remove direct definitions of KERN_<LEVEL>
uses) is broken - not enough thought was put into changing:

	.asciz	"string"

to

	.asciz	"string1" "string2"

The problem is that each string gets _separately_ NUL terminated, so
the result is a string containing:

	"string1\0string2\0"

rather than:

	"string1string2\0"

With our new printk levels, this ends up as - eg, KERN_DEBUG "string":

	0x01 0x00 0x07 0x00 "string" 0x00

which produces lots of \x01 in the kernel log.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-01 21:09:59 +00:00
Konrad Rzeszutek Wilk 884ac2978a xen/pci: We don't do multiple MSI's.
There is no hypercall to setup multiple MSI per PCI device.
As such with these two new commits:
-  08261d87f7
   PCI/MSI: Enable multiple MSIs with pci_enable_msi_block_auto()
- 5ca72c4f7c
   AHCI: Support multiple MSIs

we would call the PHYSDEVOP_map_pirq 'nvec' times with the same
contents of the PCI device. Sander discovered that we would get
the same PIRQ value 'nvec' times and return said values to the
caller. That of course meant that the device was configured only
with one MSI and AHCI would fail with:

ahci 0000:00:11.0: version 3.0
xen: registering gsi 19 triggering 0 polarity 1
xen: --> pirq=19 -> irq=19 (gsi=19)
(XEN) [2013-02-27 19:43:07] IOAPIC[0]: Set PCI routing entry (6-19 -> 0x99 -> IRQ 19 Mode:1 Active:1)
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
ahci: probe of 0000:00:11.0 failed with error -22

That is b/c in ahci_host_activate the second call to
devm_request_threaded_irq  would return -EINVAL as we passed in
(on the second run) an IRQ that was never initialized.

CC: stable@vger.kernel.org
Reported-and-Tested-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-03-01 10:54:21 -05:00
Gabor Juhos 09f5100a59 watchdog: ath79_wdt: get register base from platform device's resources
The ath79_wdt driver uses a fixed memory address
currently. Although this is working with each
currently supported SoCs, but this may change
in the future. Additionally, the driver includes
platform specific header files in order to be
able to get the memory base of the watchdog
device.

The patch adds a memory resource to the platform
device, and converts the driver to get the base
address of the watchdog device from that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01 12:22:38 +01:00
Gabor Juhos 0f2ad9ed7c MIPS: ath79: use dynamically allocated watchdog device
Remove the static watchdog device variable and use
the 'platform_device_register_simple' helper to
allocate and register the device in one step.

This allows us to save a few bytes in the kernel image.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01 12:22:29 +01:00
Linus Torvalds 1e5005979e Merge git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull one kvm bugfix from Gleb Natapov.

* git://git.kernel.org/pub/scm/virt/kvm/kvm:
  x86/kvm: Fix pvclock vsyscall fixmap
2013-02-28 20:44:23 -08:00
Linus Torvalds 1a32c58bb9 arm-soc: mvebu platform changes
This series contains changes for the Marvell EBU platforms (mvebu,
 orion, kirkwood, dove) that were not part of the first set of pull
 requests because of dependencies on the MMC tree, and being submitted
 a little late.
 
 Notable changes are:
 
 * More devices get moved out of board files into device tree
   descriptions. The remaining devices listed in there have patches
   that will get sent for 3.10, after which we can remove a lot of the
   board files entirely. We are doing the pinctrl and mmc drivers here,
   ethernet and PCI still remain.
 
 * SMP support for mvebu is improved with support for the
   local interrupt controller.
 
 * The Guruplug board file gets replaced with a DT description.
 
 Unfortunately, the dependency on the MMC tree turned out to be a much
 larger problem than expected, when the MMC maintainer rebased the patches
 in his tree that all of the patches in this branch are based on, which
 caused merge conflicts between the new and old versions of those patches.
 
 To work around the merge conflicts, this branch rebases all patches
 on top of the respective MMC patches that did get merged into 3.9.
 The patches are all identical to the versions that were part of
 linux-next, but have a new commit date.
 
 Merge conflicts:
 
 * in board-nsa310.c, the gpio.h inclusion was removed prematurely and
   put back as a bug fix earlier. With this series it is really not needed
   any more.
 
 * The patch to add rtc support was already applied by Andrew Morton,
   and conflicts with a second copy that was in this series, which adds
   a lot of other devices to arch/arm/boot/dts/armada-370-xp.dtsi.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUS+/hWCrR//JCVInAQK/eBAA0RskNuX3dL4Tn0FUBQfA11hMXyNLSLdY
 mwNE91jJO0Q6NIjSlZCMV0pqEhoVlWlKnHcD76ID68qxNHiU4XMyxT/NkwTQAdOC
 lKry+X8B5yt4kYiQp5adpME0rTHqtCQ9pNswU7j40ENNiOfwNk34O+PfNvh+FDkn
 s2mmLjyAbJgO1n5SGVETaVCGAW1/1dcCSxOV2BqUzn2AecTHmZb1lS8W+y761+Yi
 1V+Y3Xp4EJngN/OGtCNNfJ3H627MERfUF80xeijE2elhrdmynkBN1oOb4H+1AX6w
 Tsi4BUYd5BkeETgsskOeZevkbRq4LZGHueaofh9i11enjgVE09Z/P3eL2K6/UbBA
 mVA7+i1UujTcrEOUNO+EJ/AKvz7BU9trI4gR/RDHEkg2vzIHtsqMnDf44cQESxTn
 7AgLo+G5nG10hucgcTNse3Ev2k4wQpdev5QX3uGKVNW7PPoxY/abSYKtWek6TjGd
 nMGMI0+Re17Ej83SCXEJOvHmaA5IQDJJQOVLz/IxNuHE8HjEwJmguQy/YFzyZ0dQ
 Rha3iaLXrWBLt5jIYOIdI0K6S4KUp5mZCax2MK/c6D18Tiuk4iIA9yD1doL4a3g8
 AWoRL23ajabVa+Pg+EHqOsSUCfNI4+teMuio8vsJifudxZ6R8vYgJqdzIklwCkl3
 0l2Xvnf55Ks=
 =7l0+
 -----END PGP SIGNATURE-----

Merge tag 'late-mvebu-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC mvebu platform changes from Olof Johansson:
 "This series contains changes for the Marvell EBU platforms (mvebu,
  orion, kirkwood, dove) that were not part of the first set of pull
  requests because of dependencies on the MMC tree, and being submitted
  a little late.

  Notable changes are:

   - More devices get moved out of board files into device tree
     descriptions.  The remaining devices listed in there have patches
     that will get sent for 3.10, after which we can remove a lot of the
     board files entirely.  We are doing the pinctrl and mmc drivers
     here, ethernet and PCI still remain.

   - SMP support for mvebu is improved with support for the local
     interrupt controller.

   - The Guruplug board file gets replaced with a DT description.

  Unfortunately, the dependency on the MMC tree turned out to be a much
  larger problem than expected, when the MMC maintainer rebased the
  patches in his tree that all of the patches in this branch are based
  on, which caused merge conflicts between the new and old versions of
  those patches.

  To work around the merge conflicts, this branch rebases all patches on
  top of the respective MMC patches that did get merged into 3.9.  The
  patches are all identical to the versions that were part of
  linux-next, but have a new commit date."

* tag 'late-mvebu-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (90 commits)
  arm: mvebu: enable the SD card slot on Armada 370 Reference Design board
  ARM: kirkwood: topkick: init mvsdio via DT
  ARM: kirkwood: nsa310: convert to pinctrl
  ARM: Kirkwood: topkick: Enable i2c bus.
  ARM: kirkwood: topkick: convert to pinctrl
  ARM: dove: convert serial DT nodes to clocks property
  arm: mvebu: Add SPI flash on Armada 370 DB board
  arm: mvebu: Add SPI flash on Armada XP-DB board
  arm: mvebu: Add SPI flash on Armada XP-GP board
  arm: mvebu: Add support for SPI controller in Armada 370/XP
  clocksource: update and move armada-370-xp-timer documentation to timer directory
  arm: mvebu: update DT to support local timers
  ARM: Dove: convert usb host controller to DT
  arm: mvebu: Enable USB controllers on Armada 370/XP boards
  arm: mvebu: Add support for USB host controllers in Armada 370/XP
  arm: mvebu: add button for OpenBlocks AX3-4
  ARM: Kirkwood: Convert NS2 to gpio-poweroff.
  ARM: Kirkwood: Convert NSA310 I2C to device tree
  ARM: Kirkwood: Convert NSA310 to use gpio-poweroff driver
  ARM: Kirkwood: Convert NSA310 to DT based regulators.
  ...
2013-02-28 20:09:24 -08:00
Linus Torvalds 7307c00f33 arm-soc: late OMAP changes
This branch contains changes for OMAP that came in late during the release
 staging, close to when the merge window opened.
 
 It contains, among other things:
 
 - OMAP PM fixes and some patches for audio device integration
 - OMAP clock fixes related to common clock conversion
 - A set of patches cleaning up WFI entry and blocking.
 - A set of fixes and IP block support for PM on TI AM33xx SoCs (Beaglebone, etc)
 - A set of smaller fixes and cleanups around AM33xx restart and revision
   detection, as well as removal of some dead code (CONFIG_32K_TIMER_HZ)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRL9AUAAoJEIwa5zzehBx3BiIQAIwJOAZQhbIsDAmqVAGfj39i
 Y6DneECJ3BvrMsC3nk6IUOC/aW5uUi2GAmhYI6YuDDKzLfeTSGW2VQcMa98cvWig
 dLo2CPqKuuB7YZAwHkg4i3BwHVJcaPntaKOajNmhwJQIiNEiXCauP/f9kG2NKvHu
 XxlWuNyeEB1uQlnB0nXL+HHqcHKxproK6eIvILWYJMdVYnMn+57O3yWBmXkCr07b
 9oOa1NdR+4xN7cSbS5YGUfxqwDWnXSZSKggXEPLglHObmSqj7R7NDBNgRR7ui8+t
 c3UYljPsiRprY8TYVTbator9wyYocZ6pMja+vrPwATHUMsxGZTurURzpYsyAXaMc
 VKWLWItCOOee8CKn1+pGpelon69//EJEFIsg1hChJJZKMRLHYVg48tM64/uN1VOo
 Mu/6XDLx4DearMxZv5pZ7Qe0IkIDGtlpyIwo1Yy6T5xEC6pcwRG0XeTuQtOxndFc
 XUcXrE+Nlg3eW/6xtB7XhftnKVoBsCrIQ5Z+PxMw1QNUTXWxQwZffeBLxGenuoD6
 IofLCdjVyRMcPnVj+s29ZO5k7yMllQ0dO8bySxoU2Y2QvD7wUdZxGDY5Nu7cwfAt
 jL0sEpT32g4ZSD8R75qt+qTDWv/IjB4EE/uNw3y2AUSTT5A+cN7H3MXw5s7hm8nI
 fw5cYz37iH0zUZhoIU/w
 =/vBT
 -----END PGP SIGNATURE-----

Merge tag 'late-omap' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late OMAP changes from Olof Johansson:
 "This branch contains changes for OMAP that came in late during the
  release staging, close to when the merge window opened.

  It contains, among other things:

   - OMAP PM fixes and some patches for audio device integration
   - OMAP clock fixes related to common clock conversion
   - A set of patches cleaning up WFI entry and blocking.
   - A set of fixes and IP block support for PM on TI AM33xx SoCs
     (Beaglebone, etc)
   - A set of smaller fixes and cleanups around AM33xx restart and
     revision detection, as well as removal of some dead code
     (CONFIG_32K_TIMER_HZ)"

* tag 'late-omap' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits)
  ARM: omap2: include linux/errno.h in hwmod_reset
  ARM: OMAP2+: fix some omap_device_build() calls that aren't compiled by default
  ARM: OMAP4: hwmod data: Enable AESS hwmod device
  ARM: OMAP4: hwmod data: Update AESS data with memory bank area
  ARM: OMAP4+: AESS: enable internal auto-gating during initial setup
  ASoC: TI AESS: add autogating-enable function, callable from architecture code
  ARM: OMAP2+: hwmod: add enable_preprogram hook
  ARM: OMAP4: clock data: Add missing clkdm association for dpll_usb
  ARM: OMAP2+: PM: Fix the dt return condition in pm_late_init()
  ARM: OMAP2: am33xx-hwmod: Fix "register offset NULL check" bug
  ARM: OMAP2+: AM33xx: hwmod: add missing HWMOD_NO_IDLEST flags
  ARM: OMAP: AM33xx hwmod: Add parent-child relationship for PWM subsystem
  ARM: OMAP: AM33xx hwmod: Corrects PWM subsystem HWMOD entries
  ARM: DTS: AM33XX: Add nodes for OCMC RAM and WKUP-M3
  ARM: OMAP2+: AM33XX: Update the hardreset API
  ARM: OMAP2+: AM33XX: hwmod: Update the WKUP-M3 hwmod with reset status bit
  ARM: OMAP2+: AM33XX: hwmod: Fixup cpgmac0 hwmod entry
  ARM: OMAP2+: AM33XX: hwmod: Update TPTC0 hwmod with the right flags
  ARM: OMAP2+: AM33XX: hwmod: Register OCMC RAM hwmod
  ARM: OMAP2+: AM33XX: CM/PRM: Use __ASSEMBLER__ macros in header files
  ...
2013-02-28 20:00:40 -08:00
Linus Torvalds f8f466c817 arm-soc: i.MX DT changes
This branch contains of devicetree changes for the Freescale i.MX platform.
 
 The base patch of the branch changes the format of the dts files to a
 slightly different format that makes it easier to do derivative board
 definitions, but it also introduces a lot of churn in the process since
 every line of the file is touched.
 
 On top of that are a handful of the regular changes; enabling more boards
 as DT-based instead of legacy board files (mx25pdk), enabling another
 driver for devicetree and thus adding bindings (onewire), etc.
 
 I'm not happy about the churn, and will likely not take it for other platforms
 in the future.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRL81iAAoJEIwa5zzehBx38egP/jkD5elNVtJ9Pu2AzwOnfYNG
 oNfoVRr189VcCxQ8sq9xocnZDPyJEZzR/wnrs0wiFcFaMU1qQJpR4EgG8zhifM8D
 plIFnf9H3z1/p+XKk7NwPII2RcSEQQ7jfK3UaPg0tQVOgGJiOh/czoYTRNHCaoQY
 RF0W1K01uR15Pee95USIBvllyveJrss54dFB9ON1xGgf3aAHtyoPy/7Robm1FZAd
 14msm3cN2v1lWXrTYvL8d+8sK6cIm1lOGOpc/VBSX5sjEBMiuGwnIDvajEvXIXMB
 DNvkK6WpWSQsVv0oDLgWSBcgqpEElHmbzOo0WTMdec4hjaoLHRbeLdoaA7On/kpj
 XofbXoXtsM2O5VSumhSfOWFtu22W3E4ng69UE5UkKknq8n+CKA5J0NmMW3PmCWws
 xk9bk9I1feqy4uVkgaihCV5o+gtawaG6vOBEClLoVF+D6INMGts1FBN/MNZCBLck
 hZjgr1/tcPlK5VMrxnlQBGRKcaXV1uGU+RWcV4jA1xR5GM3fQWMXe4aQohcYqglO
 lpHeZCfy5JDexY30jfA+ldcG27PxUIYqhapanYTmcXMCSO4XZ4o1gy8oxDLrUoXe
 /Whi3csxcGhitkUBWvxAeoOTeWRJonwyqEPJ/LpdNgnPmj8tnZKo3tc5wEKEywMA
 qVDu5M4yi3FfkDK+0vp9
 =72aL
 -----END PGP SIGNATURE-----

Merge tag 'late-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC i.MX DT changes from Olof Johansson:
 "This branch contains of devicetree changes for the Freescale i.MX
  platform.

  The base patch of the branch changes the format of the dts files to a
  slightly different format that makes it easier to do derivative board
  definitions, but it also introduces a lot of churn in the process
  since every line of the file is touched.

  On top of that are a handful of the regular changes; enabling more
  boards as DT-based instead of legacy board files (mx25pdk), enabling
  another driver for devicetree and thus adding bindings (onewire), etc.

  I'm not happy about the churn, and will likely not take it for other
  platforms in the future."

* tag 'late-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
  ARM: dts: add dtsi for imx6q and imx6dl
  ARM: dts: rename imx6q.dtsi to imx6qdl.dtsi
  ARM: dts: i.MX6: Add regulator delay support
  ARM: dts: Add device tree entry for onewire master on i.MX53
  ARM: i.MX53: Add clocks for i.mx53 onewire master.
  W1: Add device tree support to MXC onewire master.
  ARM: imx: enable imx6q-cpufreq support
  ARM: dts: Add apf51 basic support
  ARM i.MX6: change mxs usbphy clock usage
  ARM: dts: imx6q: Remove silicon version from SDMA firmware
  ARM i.MX53: dts: add oftree for MBa53 baseboard
  ARM i.MX53: add dts for the TQ tqma53 module
  ARM: dts: imx53: pinctrl update
  ARM i.MX51 babbage: Add keypad support
  ARM: dts: imx: Add imx51 KPP entry
  ARM: dts: imx25-karo-tx25: Put status entry in the end
  ARM: mx25pdk: Add device tree support
  ARM: dts: imx: use nodes label in board dts
  ARM: dts: add missing imx dtb targets
  ARM: boot: dts: Add an entry for imx27-pdk.dtb
  ...
2013-02-28 19:59:34 -08:00
Linus Torvalds 2af78448ff Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal management updates from Zhang Rui:
 "Highlights:

   - introduction of Dove thermal sensor driver.

   - introduction of Kirkwood thermal sensor driver.

   - introduction of intel_powerclamp thermal cooling device driver.

   - add interrupt and DT support for rcar thermal driver.

   - add thermal emulation support which allows platform thermal driver
     to do software/hardware emulation for thermal issues."

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (36 commits)
  thermal: rcar: remove __devinitconst
  thermal: return an error on failure to register thermal class
  Thermal: rename thermal governor Kconfig option to avoid generic naming
  thermal: exynos: Use the new thermal trend type for quick cooling action.
  Thermal: exynos: Add support for temperature falling interrupt.
  Thermal: Dove: Add Themal sensor support for Dove.
  thermal: Add support for the thermal sensor on Kirkwood SoCs
  thermal: rcar: add Device Tree support
  thermal: rcar: remove machine_power_off() from rcar_thermal_notify()
  thermal: rcar: add interrupt support
  thermal: rcar: add read/write functions for common/priv data
  thermal: rcar: multi channel support
  thermal: rcar: use mutex lock instead of spin lock
  thermal: rcar: enable CPCTL to use hardware TSC deciding
  thermal: rcar: use parenthesis on macro
  Thermal: fix a build warning when CONFIG_THERMAL_EMULATION cleared
  Thermal: fix a wrong comment
  thermal: sysfs: Add a new sysfs node emul_temp for thermal emulation
  PM: intel_powerclamp: off by one in start_power_clamp()
  thermal: exynos: Miscellaneous fixes to support falling threshold interrupt
  ...
2013-02-28 19:48:26 -08:00
Florian Fainelli 5649912059 arm: mvebu: enable the SD card slot on Armada 370 Reference Design board
The Armada 370 Reference Design board has one SD card slot, directly
connected to the SDIO IP of the SoC, so we enable this IP. there are no
GPIOs for card-detect and write-protect so we do not specify any.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:16 +01:00
Jason Cooper 0dbe6ce037 ARM: kirkwood: topkick: init mvsdio via DT
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Tested-by: Andrew Lunn <andrew@lunn.ch>
2013-02-28 18:57:16 +01:00
Jason Cooper 4ded65751c ARM: kirkwood: nsa310: convert to pinctrl
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:16 +01:00
Andrew Lunn 44d032e794 ARM: Kirkwood: topkick: Enable i2c bus.
Add a DT node for I2C and pinctrl hog for the pins. There appears to
be an i2c bus on topkick with a device on it:

i2cdetect 0
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-0.
I will probe address range 0x03-0x77.
Continue? [Y/n] y
     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00:          -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- 64 -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:15 +01:00
Jason Cooper 15989543d4 ARM: kirkwood: topkick: convert to pinctrl
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:15 +01:00
Sebastian Hesselbarth 8be7a962e8 ARM: dove: convert serial DT nodes to clocks property
of_serial now has support for using clocks property and we have
a DT clock provider. This patch replaces the hard coded clock-frequency
property with a clocks phandle to tclk.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:15 +01:00
Gregory CLEMENT 04e09b7273 arm: mvebu: Add SPI flash on Armada 370 DB board
This patch add support for the SPI flash MX25l25635E which is present
on the Armada 370 DB board. This flash stores the bootloader and its
environment.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:15 +01:00
Gregory CLEMENT 1f24a21f8e arm: mvebu: Add SPI flash on Armada XP-DB board
This patch add support for the SPI flash M25P64 which is present on
the Armada XP DB board. This flash stores the bootloader and its
environment.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:15 +01:00
Ezequiel Garcia 9dc3e34687 arm: mvebu: Add SPI flash on Armada XP-GP board
This patch adds an SPI master device node for Armada XP-GP board.
This master node is an SPI flash controller 'n25q128a13'.

Since there is no 'partitions' node declared, one full sized
partition named as the device will be created.

Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Lior Amsalem <alior@marvell.com>
Tested-by: Gregory Clement <gregory.clement@free-electrons.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Acked-by: Gregory Clement <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:14 +01:00
Ezequiel Garcia d5dc035eaa arm: mvebu: Add support for SPI controller in Armada 370/XP
The Armada 370 and Armada XP SoC has an SPI controller.
This patch adds support for this controller in Armada 370
and Armada XP SoC common device tree files.

Note that the Armada XP SPI register length is 0x50 bytes,
while Armada 370 SPI register length is 0x28 bytes,
so we choose the smaller of the two.

Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Lior Amsalem <alior@marvell.com>
Acked-by: Gregory Clement <gregory.clement@free-electrons.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:14 +01:00
Gregory CLEMENT e1dd464901 arm: mvebu: update DT to support local timers
Now that the time-armada-370-xp support local timers, updated the
device tree to take it into account.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:14 +01:00
Sebastian Hesselbarth a1abcd7c23 ARM: Dove: convert usb host controller to DT
With DT support for orion-ehci also convert Dove to it and
remove the legacy calls and clock aliases.

This patch is based on "ARM: Dove: split legacy and DT setup"
applied to mvebu/boards recently.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:14 +01:00
Ezequiel Garcia 200506b1b6 arm: mvebu: Enable USB controllers on Armada 370/XP boards
This patch activates every USB port provided by each SoC.
Except for Armada XP Openblocks AX3-4 board,
where we enable only the first two USB ports
until we have more information on the third one usage.

Cc: Lior Amsalem <alior@marvell.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Tested-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:13 +01:00
Ezequiel Garcia b2bb806f55 arm: mvebu: Add support for USB host controllers in Armada 370/XP
The Armada 370 and Armada XP SoC has an Orion EHCI USB controller.
This patch adds support for this controller in Armada 370
and Armada XP SoC common device tree files.

Cc: Lior Amsalem <alior@marvell.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Tested-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:13 +01:00
Thomas Petazzoni 4ca73962a1 arm: mvebu: add button for OpenBlocks AX3-4
The OpenBlocks AX3-4 board has one software-controlled button on the
front side, labeled "INIT", so we add minimal support for this button
in the kernel.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:13 +01:00
Andrew Lunn 102c9543ff ARM: Kirkwood: Convert NS2 to gpio-poweroff.
Remove C code and add a Device Tree node in its place.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:13 +01:00
Andrew Lunn b4d2a24fa5 ARM: Kirkwood: Convert NSA310 I2C to device tree
Add a sub-node into the I2C node to represent the adt7476 device.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:12 +01:00
Andrew Lunn 7dcc628349 ARM: Kirkwood: Convert NSA310 to use gpio-poweroff driver
Remove the C code and add a Device Tree node for gpio-poweroff.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:12 +01:00
Andrew Lunn 12131b5424 ARM: Kirkwood: Convert NSA310 to DT based regulators.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:12 +01:00
Sebastian Hesselbarth 41e364bb24 ARM: Dove: add fixed regulator for CuBox USB power
CuBox needs to enable USB power on a gpio pin. Add a fixed regulator
to always enable usb power on boot.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:12 +01:00
Sebastian Hesselbarth e35e40cd55 ARM: Dove: move CuBox led pinctrl to gpio-leds node
gpio-leds has support for pinctrl allocation, make use of it.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:12 +01:00
Nobuhiro Iwamatsu 50ab955486 ARM: Kirkwood: Convert openblocks A6 board to pinctrl
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:11 +01:00
Nobuhiro Iwamatsu 9290469917 ARM: Kirkwood: Add pinctrl of NAND to 88f6282
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:11 +01:00
Nobuhiro Iwamatsu 00211e9650 ARM: Kirkwood: Add pinctrl of TWSI1 to 88f6282
The 88f6282 has one more TWSI(TWSI1). This add the information to enable
pinctl of TWSI1.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:11 +01:00
Thomas Petazzoni 8059fc1de2 arm: kirkwood: add pinmux option for the SDIO interface on 88F6282
This commit adds a pinmux option, pmx_sdio, to enable the muxing of
the SDIO interface on the 88F6282 SoC from Marvell.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:11 +01:00
Thomas Petazzoni 5dd8a01003 arm: kirkwood: mplcec4: use Device Tree to probe SDIO
Now that the mvsdio driver has a Device Tree binding, and the SDIO
controller is declared in kirkwood.dtsi, migrate the mplcec4 board to
use the Device Tree to probe the SDIO controller and to mux the pins
of the SDIO interface correctly.

This patch has not been tested, it remains to be tested by a person
having access to the hardware.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Stefan Peter <s.peter@mpl.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:11 +01:00
Thomas Petazzoni a49da46c52 arm: kirkwood: dreamplug: use Device Tree to probe SDIO
Now that the mvsdio driver has a Device Tree binding, and the SDIO
controller is declared in kirkwood.dtsi, migrate the dreamplug board
to use the Device Tree to probe the SDIO controller and to mux this
interface properly.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:10 +01:00
Thomas Petazzoni ec05fcf679 arm: kirkwood: add Device Tree informations for the SDIO controller
Now that the SDIO controller has a Device Tree binding, let's use it
in kirkwood.dtsi.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:10 +01:00
Thomas Petazzoni 5f6d11c398 arm: mvebu: enable the SDIO interface on the Globalscale Mirabox
The Globalscale Mirabox uses the SDIO interface of the Armada 370 to
connect to a Wifi/Bluetooth SD8787 chip, so we enable the SDIO
interface of this board in its Device Tree file.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:10 +01:00
Thomas Petazzoni b6150c7106 arm: mvebu: enable the SD card slot on Armada 370 DB board
The Armada XP DB evaluation board has one SD card slot, directly
connected to the SDIO IP of the SoC, so we add a device tree
description for it.

However, in the default configuration of the board, the SD card slot
is not usable: the connector plugged into CON40 must be changed
against a different one, provided with the board by the
manufacturer. Since such a manual modification of the hardware is
needed, we did not enable the SDIO interface by default, and left it
to the board user to modify the Device Tree if needed. Since this
board is really only an evaluation board for developers and not a
final product, it is not too bad.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:10 +01:00
Thomas Petazzoni d64c129b44 arm: mvebu: enable the SD card slot on Armada XP DB board
The Armada XP DB evaluation board has one SD card slot, directly
connected to the SDIO IP of the SoC, so we enable this
IP. Unfortunately, there are no GPIOs for card-detect and
write-protect.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:10 +01:00
Thomas Petazzoni 6d36e8e08f arm: mvebu: add pin muxing options for the SDIO interface on Armada XP
The SDIO interface is only available on pins MPP30/31/32/33/34/35 on
the various Armada XP variants, so we provide a pin muxing option for
this in the Armada XP .dtsi files.

Even though those muxing options are the same for MV78230, MV78260 and
MV78460, we keep them in each .dtsi file, because the number of pins,
and therefore the declaration of the pinctrl node, is different for
each SoC variant.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:09 +01:00
Thomas Petazzoni fa1b21d135 arm: mvebu: add pin muxing options for the SDIO interface on Armada 370
The SDIO interface is available either on pins MPP9/11/12/13/14/15 or
MPP47/48/49/50/51/52 on the Armada 370. Even though all combinations
are potentially possible, those two muxing options are the most
probable ones, so we provide those at the SoC level .dtsi file.

In practice, in turns out the Armada 370 DB board uses the former,
while the Armada 370 Mirabox uses the latter.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:09 +01:00
Thomas Petazzoni 42bb531671 arm: mvebu: add DT information for the SDIO interface of Armada 370/XP
Now that the mvsdio MMC driver has a Device Tree binding, we add the
Device Tree informations to describe the SDIO interface available in
the Armada 370/XP SoCs.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:09 +01:00
Gregory CLEMENT 0db98549bd arm: mvebu: Add RTC support for Armada 370 and Armada XP
The Armada 370 and Armada XP Socs have the same controller that the
one used in the orion platforms. This patch updates the device tree
for these SoCs.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Florian Fainelli <florian@openwrt.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:09 +01:00
Gregory CLEMENT d57c3590f5 arm: mvebu: update defconfig with ATAG support when using DT
Some of the mvebu boards (mainly the development board) come with
plug-in RAM modules. This patch allows to let the bootloaders which
have no support for DTS to give the real amount of memory available on
the board.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:09 +01:00
Ezequiel Garcia d0b8a49c4b ARM: mvebu: Update defconfig to select SPI flash and MTD support
The Armada XP DB-MV784MP-GP board has an SPI flash device.
These options allow to access that device over MTD.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:08 +01:00
Ezequiel Garcia d2d1ef4f02 ARM: mvebu: Update defconfig to select SPI support
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Lior Amsalem <alior@marvell.com>
Acked-by: Gregory Clement <gregory.clement@free-electrons.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:08 +01:00
Gregory CLEMENT 568fc0a321 arm: mvebu: support for the new Armada XP development board(DB-MV784MP-GP)
This is the new Armada XP evaluation board from Marvell. It comes with
a RS232 port over USB, a SATA link, an internal SSD, 4 Ethernet
Gigabit links.

Support for USB (Host and device), SDIO, PCIe will be added as drivers
when they become available for Armada XP in mainline.

Tested-by: Simon Guinot <simon.guinot@sequanux.org>
Tested-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:08 +01:00
Gregory CLEMENT cecf42c5d7 arm: mvebu: update defconfig with local timer support
Now that we have support for local timers, enable it by default

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:08 +01:00
Gregory CLEMENT 3a6f08a370 arm: mvebu: Add support for local interrupt
MPIC allows the use of private interrupt for each CPUs. The 28th first
interrupts are per-cpu. This patch adds support to use them.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:07 +01:00
Ezequiel Garcia 9b75ac0cbf arm: mvebu: Update defconfig to select USB support
Cc: Lior Amsalem <alior@marvell.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Tested-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:07 +01:00
Willy Tarreau 9b47a4fb77 ARM: kirkwood: convert Guruplug Server Plus to use the device tree
Add a device tree entry for the Guruplug Server Plus board. This port
was based both on the work done on the dreamplug and the dockstar.

It builds, boots and works on my Guruplug Server Plus.

Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:07 +01:00
Florian Fainelli 491221451b arm: mvebu: add DTS file for Marvell RD-A370-A1 board
This patch adds the DTS file to support the Marvell RD-A370-A1
(Reference Design board) also known as RD-88F6710 board. It is almost
entirely similar to the DB-A370 board except that the first Ethernet PHY
is SGMII-wired and the second is a switch which is RGMII-wired.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:07 +01:00
Gregory CLEMENT 3202bf0157 arm: mvebu: Improve the SMP support of the interrupt controller
This patch makes the interrupt controller driver more SMP aware for
the Armada XP SoCs. It adds the support for the per-CPU irq. It also
adds the implementation for the set_affinity hook.

Patch initialy wrote by Yehuda Yitschak and reworked by Gregory
CLEMENT.

Signed-off-by: Yehuda Yitschak <yehuday@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:06 +01:00
Arnd Bergmann 48be9ac930 ARM: Dove: split legacy and DT setup
In the beginning of DT for Dove it was reasonable to have it close to
non-DT code. With improved DT support, it became more and more difficult
to not break non-DT while changing DT code.

This patch splits up DT board setup and introduces a DOVE_LEGACY config
to allow to remove legacy code for DT-only kernels.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:06 +01:00
Olof Johansson 9f86f27611 ARM: dove: update dove_defconfig with a few useful options
This refreshes the dove_defconfig, and adds:
PRINTK_TIME
DEVTMPFS
EXT4

They're quite useful, and allows booting a cubox ubuntu rootfs on SD card,
since that by default uses ext4.

The rest of the churn is due to options and defaults moving around, no
functional difference.

Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:06 +01:00
Andrew Lunn 970a43c76f ARM: Kirkwood: Remove redundent SDIO clock alias
Now that SDIO is instantiated via DT, and the SDIO DT node has a clocks
property, we no longer need a C coded clock alias. Remove it.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:06 +01:00
Andrew Lunn 25026d0d21 ARM: Kirkwood: Remove redundent USB clock alias
Now that USB is instantiated via DT, and the USB DT node has a clocks
property, we no longer need a C coded clock alias. Remove it.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:06 +01:00
Thomas Petazzoni 572aab7a2b arm: mvebu: add LEDs support to defconfig file
The OpenBlocks AX3-4 platform has several LEDs, so it sounds wise to
enable LED support in mvebu_defconfig. We anticipate that more
platforms using Marvell EBU SoCs will have LEDs in the future.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:05 +01:00
Thomas Petazzoni c9b7a72d98 arm: mvebu: enable btmrvl driver in mvebu_defconfig
The Globalscale Mirabox platform, based on the Armada 370 from
Marvell, has a SD8787 Wireless/Bluetooth chip connected on the SDIO
interface. Now that the mvsdio has a Device Tree binding, and the
necessary Device Tree informations have been added at the SoC and
board level, let's enable the btmrvl driver for the Bluetooth part of
the SD8787 chip.

For now, the driver gets probed correctly, detects the device but
apparently fails to push the firmware to the device:

Bluetooth: vendor=0x2df, device=0x911a, class=255, fn=2
Bluetooth: FW failed to be active in time!
Bluetooth: Downloading firmware failed!
Bluetooth: vendor=0x2df, device=0x911b, class=255, fn=3
Bluetooth: FW failed to be active in time!
Bluetooth: Downloading firmware failed!

This will have to be investigated separately.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:05 +01:00
Thomas Petazzoni 0c8cb1d4ae arm: mvebu: enable mwifiex driver in mvebu_defconfig
The Globalscale Mirabox platform, based on the Armada 370 from
Marvell, has a SD8787 Wireless chip connected on the SDIO
interface. Now that the mvsdio has a Device Tree binding, and the
necessary Device Tree informations have been added at the SoC and
board level, let's enable the mwifiex driver for the Wireless part of
the SD8787 chip.

For now, the driver gets probed correctly, detects a device and shows
the network interfaces. However, scanning Wifi networks doesn't work
for now, with a 'CMD_RESP: cmd 0x6 error, result=0x1' message. This
will have to be investigated separately.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:05 +01:00
Thomas Petazzoni 71e2a39623 arm: mvebu: enable SDIO support in mvebu_defconfig
Now that the mvsdio driver has gained Device Tree support and the
necessary Device Tree informations has been added for Armada 370 and
Armada XP platforms, we enable the MMC subsystem and the mvsdio driver
in mvebu_defconfig.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:05 +01:00
Gregory CLEMENT f18bfba41e arm: mvebu: Update defconfig with Marvell RTC support
The RTC class driver is already part of the mvebu_defconfig but the
Marvell internal RTC not yet. Now that its support is added for mvebu
let's update the config file.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: Florian Fainelli <florian@openwrt.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:05 +01:00
Arnd Bergmann 7266d48fca Merge branch 'timer/cleanup' into late/mvebu2
Basing the mvebu patches on top of the timer cleanup
avoids some nasty merges.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-02-28 18:54:15 +01:00
Arnd Bergmann 168268a225 Merge 'mmc/upstream' into late/mvebu2
These patches from the mmc tree were merged into v3.9 already
and the later mvebu patches depend on them.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-02-28 18:53:01 +01:00
Konrad Rzeszutek Wilk c79c498262 xen/pat: Disable PAT using pat_enabled value.
The git commit 8eaffa67b4
(xen/pat: Disable PAT support for now) explains in details why
we want to disable PAT for right now. However that
change was not enough and we should have also disabled
the pat_enabled value. Otherwise we end up with:

mmap-example:3481 map pfn expected mapping type write-back for
[mem 0x00010000-0x00010fff], got uncached-minus
 ------------[ cut here ]------------
WARNING: at /build/buildd/linux-3.8.0/arch/x86/mm/pat.c:774 untrack_pfn+0xb8/0xd0()
mem 0x00010000-0x00010fff], got uncached-minus
------------[ cut here ]------------
WARNING: at /build/buildd/linux-3.8.0/arch/x86/mm/pat.c:774
untrack_pfn+0xb8/0xd0()
...
Pid: 3481, comm: mmap-example Tainted: GF 3.8.0-6-generic #13-Ubuntu
Call Trace:
 [<ffffffff8105879f>] warn_slowpath_common+0x7f/0xc0
 [<ffffffff810587fa>] warn_slowpath_null+0x1a/0x20
 [<ffffffff8104bcc8>] untrack_pfn+0xb8/0xd0
 [<ffffffff81156c1c>] unmap_single_vma+0xac/0x100
 [<ffffffff81157459>] unmap_vmas+0x49/0x90
 [<ffffffff8115f808>] exit_mmap+0x98/0x170
 [<ffffffff810559a4>] mmput+0x64/0x100
 [<ffffffff810560f5>] dup_mm+0x445/0x660
 [<ffffffff81056d9f>] copy_process.part.22+0xa5f/0x1510
 [<ffffffff81057931>] do_fork+0x91/0x350
 [<ffffffff81057c76>] sys_clone+0x16/0x20
 [<ffffffff816ccbf9>] stub_clone+0x69/0x90
 [<ffffffff816cc89d>] ? system_call_fastpath+0x1a/0x1f
---[ end trace 4918cdd0a4c9fea4 ]---

(a similar message shows up if you end up launching 'mcelog')

The call chain is (as analyzed by Liu, Jinsong):
do_fork
  --> copy_process
    --> dup_mm
      --> dup_mmap
       	--> copy_page_range
          --> track_pfn_copy
            --> reserve_pfn_range
              --> line 624: flags != want_flags
It comes from different memory types of page table (_PAGE_CACHE_WB) and MTRR
(_PAGE_CACHE_UC_MINUS).

Stefan Bader dug in this deep and found out that:
"That makes it clearer as this will do

reserve_memtype(...)
--> pat_x_mtrr_type
  --> mtrr_type_lookup
    --> __mtrr_type_lookup

And that can return -1/0xff in case of MTRR not being enabled/initialized. Which
is not the case (given there are no messages for it in dmesg). This is not equal
to MTRR_TYPE_WRBACK and thus becomes _PAGE_CACHE_UC_MINUS.

It looks like the problem starts early in reserve_memtype:

       	if (!pat_enabled) {
                /* This is identical to page table setting without PAT */
                if (new_type) {
                        if (req_type == _PAGE_CACHE_WC)
                                *new_type = _PAGE_CACHE_UC_MINUS;
                        else
                               	*new_type = req_type & _PAGE_CACHE_MASK;
               	}
                return 0;
        }

This would be what we want, that is clearing the PWT and PCD flags from the
supported flags - if pat_enabled is disabled."

This patch does that - disabling PAT.

CC: stable@vger.kernel.org # 3.3 and further
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Reported-and-Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reported-and-Tested-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-02-28 09:03:00 -05:00
Heiko Carstens 72a6b43e4b s390/module: fix compile warning
Get rid of this one (false positive):
arch/s390/kernel/module.c: In function ‘apply_relocate_add’:
arch/s390/kernel/module.c:404:5: warning: ‘rc’ may be used uninitialized
                                 in this function [-Wmaybe-uninitialized]
arch/s390/kernel/module.c:225:6: note: ‘rc’ was declared here

Play safe and preinitialize rc with an error value, so we see an error
if new users indeed don't initialize it.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-28 09:37:13 +01:00
Heiko Carstens 066c437359 s390/uaccess: fix kernel ds access for page table walk
When the kernel resides in home space and the mvcos instruction is not
available uaccesses for kernel ds happen via simple strnlen() or memcpy()
calls.
This however can break badly, since uaccesses in kernel space may fail as
well, especially if CONFIG_DEBUG_PAGEALLOC is turned on.

To fix this implement strnlen_kernel() and copy_in_kernel() functions
which can only be used by the page table uaccess functions. These two
functions detect invalid memory accesses and return the correct length
of processed data.. Both functions are more or less a copy of the std
variants without sacf calls.

Fixes ipl crashes on 31 bit machines as well on 64 bit machines without
mvcos. Caused by changing the default address space of the kernel being
home space.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-28 09:37:12 +01:00
Heiko Carstens 225cf8d69c s390/uaccess: fix strncpy_from_user string length check
The "standard" and page table walk variants of strncpy_from_user() first
check the length of the to be copied string in userspace.
The string is then copied to kernel space and the length returned to the
caller.
However userspace can modify the string at any time while the kernel
checks for the length of the string or copies the string. In result the
returned length of the string is not necessarily correct.
Fix this by copying in a loop which mimics the mvcos variant of
strncpy_from_user(), which handles this correctly.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-28 09:37:11 +01:00
Syam Sidhardhan db7760ad9b s390/dis: Fix invalid array size
We are using sizeof operator for an array given as function argument,
which is incorrect.

Signed-off-by: Syam Sidhardhan <s.syam@samsung.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-28 09:37:09 +01:00
Heiko Carstens d12a297038 s390/uaccess: remove pointless access_ok() checks
access_ok() always returns 'true' on s390. Therefore all calls
are quite pointless and can be removed.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-28 09:37:09 +01:00
Heiko Carstens f45655f6a6 s390/uaccess: fix strncpy_from_user/strnlen_user zero maxlen case
If the maximum length specified for the to be accessed string for
strncpy_from_user() and strnlen_user() is zero the following incorrect
values would be returned or incorrect memory accesses would happen:

strnlen_user_std() and strnlen_user_pt() incorrectly return "1"
strncpy_from_user_pt() would incorrectly access "dst[maxlen - 1]"
strncpy_from_user_mvcos() would incorrectly return "-EFAULT"

Fix all these oddities by adding early checks.

Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-28 09:37:08 +01:00
Heiko Carstens d7b788cd06 s390/uaccess: shorten strncpy_from_user/strnlen_user
Always stay within page boundaries when copying from user within
strlen_user_mvcos()/strncpy_from_user_mvcos(). This allows to
shorten the code a bit and may prevent unnecessary faults, since
we copy quite large amounts of memory to kernel space.

Also directly call the mvcos variants of copy_from_user() to
avoid indirect branches.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-28 09:37:07 +01:00
Heiko Carstens 17ea345a47 s390/mm: ignore change bit for vmemmap
Add hint to the page tables that we don't care about the change bit
in storage keys that belong to vmemmap pages.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-28 09:37:06 +01:00
Heiko Carstens 1819ed1f06 s390/page table dumper: add support for change-recording override bit
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-28 09:37:06 +01:00
Peter Hurley 3d2a80a230 x86/kvm: Fix pvclock vsyscall fixmap
The physical memory fixmapped for the pvclock clock_gettime vsyscall
was allocated, and thus is not a kernel symbol. __pa() is the proper
method to use in this case.

Fixes the crash below when booting a next-20130204+ smp guest on a
3.8-rc5+ KVM host.

[    0.666410] udevd[97]: starting version 175
[    0.674043] udevd[97]: udevd:[97]: segfault at ffffffffff5fd020
     ip 00007fff069e277f sp 00007fff068c9ef8 error d

Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-02-28 08:50:11 +02:00
Linus Torvalds 2a7d2b96d5 Merge branch 'akpm' (final batch from Andrew)
Merge third patch-bumb from Andrew Morton:
 "This wraps me up for -rc1.
   - Lots of misc stuff and things which were deferred/missed from
     patchbombings 1 & 2.
   - ocfs2 things
   - lib/scatterlist
   - hfsplus
   - fatfs
   - documentation
   - signals
   - procfs
   - lockdep
   - coredump
   - seqfile core
   - kexec
   - Tejun's large IDR tree reworkings
   - ipmi
   - partitions
   - nbd
   - random() things
   - kfifo
   - tools/testing/selftests updates
   - Sasha's large and pointless hlist cleanup"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (163 commits)
  hlist: drop the node parameter from iterators
  kcmp: make it depend on CHECKPOINT_RESTORE
  selftests: add a simple doc
  tools/testing/selftests/Makefile: rearrange targets
  selftests/efivarfs: add create-read test
  selftests/efivarfs: add empty file creation test
  selftests: add tests for efivarfs
  kfifo: fix kfifo_alloc() and kfifo_init()
  kfifo: move kfifo.c from kernel/ to lib/
  arch Kconfig: centralise CONFIG_ARCH_NO_VIRT_TO_BUS
  w1: add support for DS2413 Dual Channel Addressable Switch
  memstick: move the dereference below the NULL test
  drivers/pps/clients/pps-gpio.c: use devm_kzalloc
  Documentation/DMA-API-HOWTO.txt: fix typo
  include/linux/eventfd.h: fix incorrect filename is a comment
  mtd: mtd_stresstest: use prandom_bytes()
  mtd: mtd_subpagetest: convert to use prandom library
  mtd: mtd_speedtest: use prandom_bytes
  mtd: mtd_pagetest: convert to use prandom library
  mtd: mtd_oobtest: convert to use prandom library
  ...
2013-02-27 20:58:09 -08:00
Sasha Levin b67bfe0d42 hlist: drop the node parameter from iterators
I'm not sure why, but the hlist for each entry iterators were conceived

        list_for_each_entry(pos, head, member)

The hlist ones were greedy and wanted an extra parameter:

        hlist_for_each_entry(tpos, pos, head, member)

Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.

Besides the semantic patch, there was some manual work required:

 - Fix up the actual hlist iterators in linux/list.h
 - Fix up the declaration of other iterators based on the hlist ones.
 - A very small amount of places were using the 'node' parameter, this
 was modified to use 'obj->member' instead.
 - Coccinelle didn't handle the hlist_for_each_entry_safe iterator
 properly, so those had to be fixed up manually.

The semantic patch which is mostly the work of Peter Senna Tschudin is here:

@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;

type T;
expression a,c,d,e;
identifier b;
statement S;
@@

-T b;
    <+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
    ...+>

[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:24 -08:00
Stephen Rothwell 887cbce0ad arch Kconfig: centralise CONFIG_ARCH_NO_VIRT_TO_BUS
Change it to CONFIG_HAVE_VIRT_TO_BUS and set it in all architecures
that already provide virt_to_bus().

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: H Hartley Sweeten <hartleys@visionengravers.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:23 -08:00
Michel Lespinasse e759a798c6 mm: use vm_unmapped_area() on frv architecture
Update the frv arch_get_unmapped_area function to make use of
vm_unmapped_area() instead of implementing a brute force search.

Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:09 -08:00
Michel Lespinasse a003119771 mm: use vm_unmapped_area() on parisc architecture
Update the parisc arch_get_unmapped_area function to make use of
vm_unmapped_area() instead of implementing a brute force search.

[akpm@linux-foundation.org: remove now-unused DCACHE_ALIGN(), per James]
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Acked-by: Helge Deller <deller@gmx.de>
Tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:09 -08:00
Linus Torvalds e3c4877de8 Merge branch 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/EFI changes from Peter Anvin:

 - Improve the initrd handling in the EFI boot stub by allowing forward
   slashes in the pathname - from Chun-Yi Lee.

 - Cleanup code duplication in the EFI mixed kernel/firmware code - from
   Satoru Takeuchi.

 - efivarfs bug fixes for more strict filename validation, with lots of
   input from Al Viro.

* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, efi: remove duplicate code in setup_arch() by using, efi_is_native()
  efivarfs: guid part of filenames are case-insensitive
  efivarfs: Validate filenames much more aggressively
  efivarfs: Use sizeof() instead of magic number
  x86, efi: Allow slash in file path of initrd
2013-02-27 16:17:42 -08:00
Linus Torvalds 18a44a7ff1 Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more x86 fixes from Peter Anvin:
 "Additional x86 fixes.  Three of these patches are pure documentation,
  two are pretty trivial; the remaining one fixes boot problems on some
  non-BIOS machines."

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Make sure we can boot in the case the BDA contains pure garbage
  x86, efi: Mark disable_runtime as __initdata
  x86, doc: Fix incorrect comment about 64-bit code segment descriptors
  doc, kernel-parameters: Document 'console=hvc<n>'
  doc, xen: Mention 'earlyprintk=xen' in the documentation.
  ACPI: Overriding ACPI tables via initrd only works with an initrd and on X86
2013-02-27 16:16:39 -08:00
Al Viro 6131ffaa1f more file_inode() open-coded instances
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-27 16:59:05 -05:00
H. Peter Anvin 7c10093692 x86: Make sure we can boot in the case the BDA contains pure garbage
On non-BIOS platforms it is possible that the BIOS data area contains
garbage instead of being zeroed or something equivalent (firmware
people: we are talking of 1.5K here, so please do the sane thing.)

We need on the order of 20-30K of low memory in order to boot, which
may grow up to < 64K in the future.  We probably want to avoid the
lowest of the low memory.  At the same time, it seems extremely
unlikely that a legitimate EBDA would ever reach down to the 128K
(which would require it to be over half a megabyte in size.)  Thus,
pick 128K as the cutoff for "this is insane, ignore."  We may still
end up reserving a bunch of extra memory on the low megabyte, but that
is not really a major issue these days.  In the worst case we lose
512K of RAM.

This code really should be merged with trim_bios_range() in
arch/x86/kernel/setup.c, but that is a bigger patch for a later merge
window.

Reported-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/n/tip-oebml055yyfm8yxmria09rja@git.kernel.org
2013-02-27 13:38:57 -08:00
Vineet Gupta 8ccfe6675f ARC: split elf.h into uapi and export it for userspace
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-02-27 20:00:26 +05:30
Vineet Gupta 17139053eb ARC: Fixup the current ABI version
The upstream kernel ABI (v3) is different from current out-of-tree (v2):
* no-legacy-syscalls
* user_regs_struct layout has changed

So we rev up the ABI version

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-02-27 20:00:25 +05:30
Vineet Gupta 5dc99e50d2 ARC: gdbserver using regset interface possibly broken
ptrace regset interface relies on ELF_NGREG for ceiling the size of user
request. So any larger request (even if legit)  would be clipped.

The existing def of ELF_NGREG didn't use user_regs_struct and was
technically one placeholder short (stop_pc) - although the current code
would still work because pt_regs includes a bunch of extra fields,
making
      ELF_NGREG >= sizeof(struct user_regs_struct)/sizeof(long)

But we need to remove this ambiguity, specially since pt_regs should NOT
be directly associated with with anything userspace-ish.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-02-27 19:59:55 +05:30
Linus Torvalds d895cb1af1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pile (part one) from Al Viro:
 "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
  locking violations, etc.

  The most visible changes here are death of FS_REVAL_DOT (replaced with
  "has ->d_weak_revalidate()") and a new helper getting from struct file
  to inode.  Some bits of preparation to xattr method interface changes.

  Misc patches by various people sent this cycle *and* ocfs2 fixes from
  several cycles ago that should've been upstream right then.

  PS: the next vfs pile will be xattr stuff."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
  saner proc_get_inode() calling conventions
  proc: avoid extra pde_put() in proc_fill_super()
  fs: change return values from -EACCES to -EPERM
  fs/exec.c: make bprm_mm_init() static
  ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
  ocfs2: fix possible use-after-free with AIO
  ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
  get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
  target: writev() on single-element vector is pointless
  export kernel_write(), convert open-coded instances
  fs: encode_fh: return FILEID_INVALID if invalid fid_type
  kill f_vfsmnt
  vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
  nfsd: handle vfs_getattr errors in acl protocol
  switch vfs_getattr() to struct path
  default SET_PERSONALITY() in linux/elf.h
  ceph: prepopulate inodes only when request is aborted
  d_hash_and_lookup(): export, switch open-coded instances
  9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
  9p: split dropping the acls from v9fs_set_create_acl()
  ...
2013-02-26 20:16:07 -08:00
Linus Torvalds 9626357371 Changes for arch/xtensa for the 3.9 merge window.
Added features:
 - add support for thread local storage (TLS)
 - add accept4 and finit_module syscalls
 - support medium-priority interrupts
 - add support for dc232c processor variant
 - support file-base simulated disk for ISS simulator
 
 Bug fixes:
 - fix return values returned by the  str[n]cmp functions
 - avoid mmap cache aliasing
 - fix handling of 'windowed registers' in ptrace
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRLSzaAAoJEI9vqH3mFV2s+1AQAIgjO8Q5EcoI6jAvSuTiAbOn
 GQOfSH7hIFkdIuTXZ76JxGfsUHQgsWF7pZMtK6B29P/qS/xIJJsHRA7kwNIiBT/T
 PRYQLrqbZwdRFr1FRgUlU/kBwFALYuEt/wC5z9A33Bv/kBDYNKsQUBiKH7L2qvC9
 6XC7xZ0cG6+8WPgqFt3+lPGyv3z9gD96rlZr2/heuvM68SrNjcchB/19thzLL8uR
 xxgNlapvih+PK6ZivT+5c2cxOK55FkyaLk0jhsCOakpx4aCrxTlQ0Mm/Do+bIn24
 n41X18xnVhsXypcYZ6/ywLeuAeLUH8A8hClb0Ksu6uUSD+umWQJ89mpuQANG28JP
 9e/5d7C6FeHtz+h1ooIveqtI/mFYfspi34En03ByfQurq6q3Z/GOw+6gWA3TRML3
 uwEk92P5zCtjL2kk+vWHJKHf602HaNx8KKvT210sc5sYyjCCPBSxmfeFQ6eDsQ6g
 sdHoxGpbLrYyh7kVIMAdHQe01o6CcUvWBe7+awsDKF0ebqGx6nTVhy8ipphgBm8Q
 m0TUKawD+UCYBfcbYN86sBh0+RNQoHlJsNLpAcDF0xDUPlq0ejmQ6dZj0Z5xA9Qn
 KWOp2rO1KkNDPFvAszkgdsXZqjWhQbsVZw0IF8Ma3YBRAtwl63WRM4SCFCpY5O8U
 jErzdORgjupGt/A7C9Rk
 =ohgg
 -----END PGP SIGNATURE-----

Merge tag 'xtensa-next-20130225' of git://github.com/czankel/xtensa-linux

Pull xtensa update from Chris Zankel:
 "Added features:
   - add support for thread local storage (TLS)

   - add accept4 and finit_module syscalls

   - support medium-priority interrupts

   - add support for dc232c processor variant

   - support file-base simulated disk for ISS simulator

  Bug fixes:

   - fix return values returned by the str[n]cmp functions

   - avoid mmap cache aliasing

   - fix handling of 'windowed registers' in ptrace"

* tag 'xtensa-next-20130225' of git://github.com/czankel/xtensa-linux:
  xtensa: add accept4 syscall
  xtensa: add support for TLS
  xtensa: add missing include asm/uaccess.h to checksum.h
  xtensa: do not enable GENERIC_GPIO by default
  xtensa: complete ptrace handling of register windows
  xtensa: add support for oprofile
  xtensa: move spill_registers to traps.h
  xtensa: ISS: add host file-based simulated disk
  xtensa: fix str[n]cmp return value
  xtensa: avoid mmap cache aliasing
  xtensa: add finit_module syscall
  xtensa: pull signal definitions from signal-defs.h
  xtensa: fix ipc_parse_version selection
  xtensa: dispatch medium-priority interrupts
  xtensa: Add config files for Diamond 233L - Rev C processor variant
  xtensa: use new common dtc rule
  xtensa: rename prom_update_property to of_update_property
2013-02-26 19:53:12 -08:00
Linus Torvalds 2b37e9a28a Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblaze
Pull microblaze update from Michal Simek:
 "Microblaze changes.

  After my discussion with Arnd I have also added there asm-generic io
  patch which is Acked by him and Geert."

* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
  asm-generic: io: Fix ioread16/32be and iowrite16/32be
  microblaze: Do not use module.h in files which are not modules
  microblaze: Fix coding style issues
  microblaze: Add missing return from debugfs_tlb
  microblaze: Makefile clean
  microblaze: Add .gitignore entries for auto-generated files
  microblaze: Fix strncpy_from_user macro
2013-02-26 19:50:22 -08:00
Linus Torvalds a9a07d40bc Merge branch 'for-upstream' of git://openrisc.net/jonas/linux
Pull OpenRISC updates from Jonas Bonn:
 "An equal number of bug fixes and trivial cleanups; no new features.

   - Two patches to fix errors thrown by the updated toolchain.

   - Three other bug fixes.

   - Four trivial cleanups."

* 'for-upstream' of git://openrisc.net/jonas/linux:
  openrisc: add missing header inclusion
  openrisc: really pass correct arg to schedule_tail
  Add bitops include needed for ext2 filesystem
  openrisc: update DTLB-miss handler last
  openrisc: fix up vmalloc page table loading
  openrisc idle: delete pm_idle
  openrisc: remove CONFIG_SYMBOL_PREFIX
  openrisc: avoid using function parameter regs in reset vector
  openrisc: remove unused current_regs
2013-02-26 19:46:23 -08:00
Linus Torvalds 2003cd90c4 Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar.

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm/pageattr: Prevent PSE and GLOABL leftovers to confuse pmd/pte_present and pmd_huge
  Revert "x86, mm: Make spurious_fault check explicitly check explicitly check the PRESENT bit"
  x86/mm/numa: Don't check if node is NUMA_NO_NODE
  x86, efi: Make "noefi" really disable EFI runtime serivces
  x86/apic: Fix parsing of the 'lapic' cmdline option
2013-02-26 19:45:29 -08:00
Linus Torvalds f8ef15d6b9 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar.

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86: Add Intel IvyBridge event scheduling constraints
  ftrace: Call ftrace cleanup module notifier after all other notifiers
  tracing/syscalls: Allow archs to ignore tracing compat syscalls
2013-02-26 19:40:37 -08:00
Linus Torvalds f6c0ffa8f0 IOMMU Updates for Linux v3.9
Besides some fixes and cleanups in the code there are three more
 important changes to point out this time:
 
 	* New IOMMU driver for the ARM SHMOBILE platform
 	* An IOMMU-API extension for non-paging IOMMUs (required for
 	  upcoming PAMU driver)
 	* Rework of the way the Tegra IOMMU driver accesses its
 	  registetrs - register windows are easier to extend now.
 
 There are also a few changes to non-iommu code, but that is acked by the
 respective maintainers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRK0gMAAoJECvwRC2XARrjHAwQANIJjqgZECxqx/MuAfmvkvA0
 gRvlqBh/LWQhm/PlkpvqTMq7YY9kH1sxk+UD32oJok3XnScQWfcrJNmpijLo9/9Z
 XyMTXQrGX0X+LWAXLIBXrlbV37mztHFEVxYrO+jiEGKP8+153sguPvmu0y6wC2AZ
 RhsrVftDE7OIqdTGo8+ORCKOg7ZXNJ04hER4vW8I+0LLP1m6nnHXSKZ4E6Vmtc9K
 YgfcwwsduYOkboMK5S0XLl58Xqiq53iXw3R+wSFIsFVVQ9Zp5yZzUGphvSQvDOBc
 fX01M+Ouu+bT5U2DlDmYCnL3K14Mr7TqlH78Loq3w6yHRm1fxQoiF5vm98ZAmFde
 nU6WCJNks0z+hIlkdIlrLgvBd8nWubGOtU3EfhzseawF1WexIusTqO4Fkp+rNJk0
 wZ8h2ATUCch17BE8O794lCQuOwHQ6q7JcQmVz2GPJ83GEvQW1svKzzPIPBm0yLW3
 hCS9T9O+Bic0Bx+L7QXu5D1aRxJskJUPnINVirfSUXb0vVLb/U9jGNgITf2A9XCl
 p5z0i4RriDwCzg9917U4ZvjYbf3rjdMRwJ5TAxNqRrooMbGvOTZCJzIjujv82Adp
 BDm8HZx3FZP/8S5hfE5Ahr4gaNle8jnO53G6jKkjDuSG6DP+XMEj82oSJ/M+Rnld
 nCvEUi0bXhwHOOfdmgNU
 =G4Ot
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU Updates from Joerg Roedel:
 "Besides some fixes and cleanups in the code there are three more
  important changes to point out this time:

	* New IOMMU driver for the ARM SHMOBILE platform
	* An IOMMU-API extension for non-paging IOMMUs (required for
	  upcoming PAMU driver)
	* Rework of the way the Tegra IOMMU driver accesses its
	  registetrs - register windows are easier to extend now.

  There are also a few changes to non-iommu code, but that is acked by
  the respective maintainers."

* tag 'iommu-updates-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (23 commits)
  iommu/tegra: assume CONFIG_OF in SMMU driver
  iommu/tegra: assume CONFIG_OF in gart driver
  iommu/amd: Remove redundant NULL check before dma_ops_domain_free().
  iommu/amd: Initialize device table after dma_ops
  iommu/vt-d: Zero out allocated memory in dmar_enable_qi
  iommu/tegra: smmu: Fix incorrect mask for regbase
  iommu/exynos: Make exynos_sysmmu_disable static
  ARM: mach-shmobile: r8a7740: Add IPMMU device
  ARM: mach-shmobile: sh73a0: Add IPMMU device
  ARM: mach-shmobile: sh7372: Add IPMMU device
  iommu/shmobile: Add iommu driver for Renesas IPMMU modules
  iommu: Add DOMAIN_ATTR_WINDOWS domain attribute
  iommu: Add domain window handling functions
  iommu: Implement DOMAIN_ATTR_PAGING attribute
  iommu: Check for valid pgsize_bitmap in iommu_map/unmap
  iommu: Make sure DOMAIN_ATTR_MAX is really the maximum
  iommu/tegra: smmu: Change SMMU's dependency on ARCH_TEGRA
  iommu/tegra: smmu: Use helper function to check for valid register offset
  iommu/tegra: smmu: Support variable MMIO ranges/blocks
  iommu/tegra: Add missing spinlock initialization
  ...
2013-02-26 11:09:17 -08:00
Linus Torvalds 42a0a1b0fd Merge branch 'for-v3.9' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping
Pull DMA-mapping updates from Marek Szyprowski:
 "This time all patches are related only to ARM DMA-mapping subsystem.
  The main extension provided by this pull request is highmem support.
  Besides that it contains a bunch of small bugfixes and cleanups."

* 'for-v3.9' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  ARM: DMA-mapping: fix memory leak in IOMMU dma-mapping implementation
  ARM: dma-mapping: Add maximum alignment order for dma iommu buffers
  ARM: dma-mapping: use himem for DMA buffers for IOMMU-mapped devices
  ARM: dma-mapping: add support for CMA regions placed in highmem zone
  arm: dma mapping: export arm iommu functions
  ARM: dma-mapping: Add arm_iommu_detach_device()
  ARM: dma-mapping: Add macro to_dma_iommu_mapping()
  ARM: dma-mapping: Set arm_dma_set_mask() for iommu->set_dma_mask()
  ARM: iommu: Include linux/kref.h in asm/dma-iommu.h
2013-02-26 10:45:25 -08:00
Linus Torvalds 4c8c225abf GPIO changes for Linux 3.9
This branch contains the usual set of individual driver improvements and
 bug fixes, as well as updates to the core code. The more notable changes
 include:
 
 - Internally add new API for referencing GPIOs by gpio_desc instead of
   number. Eventually this will become a public API
 - ACPI GPIO binding support
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRK77kAAoJEEFnBt12D9kBwZ0P/iJ++tvmUg9mt9qzN0Le0Q02
 TKCQpgOivxng03oTcLIQRK46PNPWdq2zDb1v5seqXKxdMjRd++WLxPxj4eRZNdqA
 J0K820KvqYSLAqEUDwqO288ciOyP6ThDfeT+SUUUCOwFHkFCVS0xYuxLjcX0evah
 pcXuIu6nev2Yo/RivgXVaVkOTVBf7ssR7rTpdkDl/RvK2BMZTfpmt4fAXdDcCb9k
 JlBeSC6Ifx6iUcl+lV+jA0PeA7vOEHBhXWqoy5ivtNPcBbPL//cz0ZdAL0jfVtgn
 17RPugskNv/s2uVJlhiyKA3kF2IzbE3pKGxyl2Teb4Xus398pqqaHPtiLNeKIiSV
 KUJRIu2mGdvb4Vyvno0e5Vll9PcUPX0uIeQ2uzrMAB7XtI4EHw7d9+qwj4qOI6Dg
 edCFNcI9zTeuU/Z3fAg/+ufdIY7muQz8OsKnh3R8fY29SVSa+6o6TT+tgX5M7tjH
 IEI11RaYQQEJSri9bAR0vE1nsFleWsoW6QljVIHLpNS/tBz/S8KYpbQ5qPNXknxf
 lgD0FzkNYPWWi9D3wNutwNeaktCacRfcCTH1Z4FzE+PmxoYeiCzf/4pjFbxU06dm
 WJ7i8E0SRrVW+cM8z7M+Lj6emqtQ5En0bg5ZTo75SM2X+9sNrWtw3UMQ7Ea4gxKM
 362n9tWp2k626DixWzBd
 =JN4M
 -----END PGP SIGNATURE-----

Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux

Pull GPIO changes from Grant Likely:
 "This branch contains the usual set of individual driver improvements
  and bug fixes, as well as updates to the core code.  The more notable
  changes include:

   - Internally add new API for referencing GPIOs by gpio_desc instead
     of number.  Eventually this will become a public API

   - ACPI GPIO binding support"

* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: (33 commits)
  arm64: select ARCH_WANT_OPTIONAL_GPIOLIB
  gpio: em: Use irq_domain_add_simple() to fix runtime error
  gpio: using common order: let 'static const' instead of 'const static'
  gpio/vt8500: memory cleanup missing
  gpiolib: Fix locking on gpio debugfs files
  gpiolib: let gpio_chip reference its descriptors
  gpiolib: use descriptors internally
  gpiolib: use gpio_chips list in gpiochip_find_base
  gpiolib: use gpio_chips list in sysfs ops
  gpiolib: use gpio_chips list in gpiochip_find
  gpiolib: use gpio_chips list in gpiolib_sysfs_init
  gpiolib: link all gpio_chips using a list
  gpio/langwell: cleanup driver
  gpio/langwell: Add Cloverview ids to pci device table
  gpio/lynxpoint: add chipset gpio driver.
  gpiolib: add missing braces in gpio_direction_show
  gpiolib-acpi: Fix error checks in interrupt requesting
  gpio: mpc8xxx: don't set IRQ_TYPE_NONE when creating irq mapping
  gpiolib: remove gpiochip_reserve()
  arm: pxa: tosa: do not use gpiochip_reserve()
  ...
2013-02-26 09:35:29 -08:00
Linus Torvalds ed5dc2372d MMC highlights for 3.9:
Core:
  - Support for packed commands in eMMC 4.5.  (This requires a host
    capability to be turned on.  It increases write throughput by 20%+,
    but may also increase average write latency; more testing needed.)
  - Add DT bindings for capability flags.
  - Add mmc_of_parse() for shared DT parsing between drivers.
 
 Drivers:
  - android-goldfish: New MMC driver for the Android Goldfish emulator.
  - mvsdio: Add DT bindings, pinctrl, use slot-gpio for card detection.
  - omap_hsmmc: Fix boot hangs with RPMB partitions.
  - sdhci-bcm2835: New driver for controller used by Raspberry Pi.
  - sdhci-esdhc-imx: Add 8-bit data, auto CMD23 support, use slot-gpio.
  - sh_mmcif: Add support for eMMC DDR, bundled MMCIF IRQs.
  - tmio_mmc: Add DT bindings, support for vccq regulator.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQIcBAABAgAGBQJRKmwHAAoJEHNBYZ7TNxYMNBYP/2FZRY33nrnJ0yKeMpyfdH+C
 LN+33imQudA2t86FlbAOocvcpM12oTPy+DkIbFchWhN1O4lzrqMos8/527QUm9qL
 cyCnZXrbst/Ttrs3UIbfkKNhA1m4Wau/taNPJ0fWqdmZU4424O774xSOyyB8m9x/
 DKuPIs6B9AfVAlS+OM8ZtviIvsJRgC6amZ0mNQZIKGHPm7vCTg6n35tP1ux7ZvJQ
 4dMlgqRalV+xN9gNBnCVLOc2eSwEyxIJA2m13LTHGf72pkNvSdYrID87qTJbvXOl
 Ed7PHuU3+M5bHw7ErCkbi8rmwuSuc8omNt9WK+syGLx4g7v7GceIYHNQudatdN7O
 gYUWnufT6Om6y+6h9QJ5td4ZZ7i6MhfC1Ps8hJCUjiVn+cLKlEPj0KmLAhZm+6cu
 wuBdCujeAFu7Z5VcaO2TBLHXXsgggnWbpoq7v6fucCNIleBe598Nu2YJAdbMc+W4
 8mONN4ANslTw7CAMrL3C99Ab1WVLZenX38schgDisTkGnI8dr/JCD4OpqAnPSKql
 qD5KCKRb8O4BMZpQxiFwyTzqYpmNM9RkaIykLxY5y26lgwFI+At9wh1HnhFC4Hl/
 ReJ5Cnm8sH19Vgz+5zpZzzS5/aCssObdfFImIfw1wWzwk9A8EHSjAZsVUkzXiVd4
 yRwz6eeO3gBMZ+v2humV
 =dYdW
 -----END PGP SIGNATURE-----

Merge tag 'mmc-updates-for-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

Pull MMC update from Chris Ball:
 "MMC highlights for 3.9:

  Core:
   - Support for packed commands in eMMC 4.5.  (This requires a host
     capability to be turned on.  It increases write throughput by 20%+,
     but may also increase average write latency; more testing needed.)
   - Add DT bindings for capability flags.
   - Add mmc_of_parse() for shared DT parsing between drivers.

  Drivers:
   - android-goldfish: New MMC driver for the Android Goldfish emulator.
   - mvsdio: Add DT bindings, pinctrl, use slot-gpio for card detection.
   - omap_hsmmc: Fix boot hangs with RPMB partitions.
   - sdhci-bcm2835: New driver for controller used by Raspberry Pi.
   - sdhci-esdhc-imx: Add 8-bit data, auto CMD23 support, use slot-gpio.
   - sh_mmcif: Add support for eMMC DDR, bundled MMCIF IRQs.
   - tmio_mmc: Add DT bindings, support for vccq regulator"

* tag 'mmc-updates-for-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (92 commits)
  mmc: tegra: assume CONFIG_OF, remove platform data
  mmc: add DT bindings for more MMC capability flags
  mmc: tmio: add support for the VccQ regulator
  mmc: tmio: remove unused and deprecated symbols
  mmc: sh_mobile_sdhi: use managed resource allocations
  mmc: sh_mobile_sdhi: remove unused .pdata field
  mmc: tmio-mmc: parse device-tree bindings
  mmc: tmio-mmc: define device-tree bindings
  mmc: sh_mmcif: use mmc_of_parse() to parse standard MMC DT bindings
  mmc: (cosmetic) remove "extern" from function declarations
  mmc: provide a standard MMC device-tree binding parser centrally
  mmc: detailed definition of CD and WP MMC line polarities in DT
  mmc: sdhi, tmio: only check flags in tmio-mmc driver proper
  mmc: sdhci: Fix parameter of sdhci_do_start_signal_voltage_switch()
  mmc: sdhci: check voltage range only on regulators aware of voltage value
  mmc: bcm2835: set SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK
  mmc: support packed write command for eMMC4.5 devices
  mmc: add packed command feature of eMMC4.5
  mmc: rtsx: remove driving adjustment
  mmc: use regulator_can_change_voltage() instead of regulator_count_voltages
  ...
2013-02-26 09:31:09 -08:00
Linus Torvalds 0512c04a2b Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds
Pull LED subsystem update from Bryan Wu.

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (61 commits)
  leds: leds-sunfire: use dev_err()/pr_err() instead of printk()
  leds: 88pm860x: Add missing of_node_put()
  leds: tca6507: Use of_get_child_count()
  leds: leds-pwm: make it depend on PWM and not HAVE_PWM
  Documentation: leds: update LP55xx family devices
  leds-lp55xx: fix problem on removing LED attributes
  leds-lp5521/5523: add author and copyright description
  leds-lp5521/5523: use new lp55xx common header
  leds-lp55xx: clean up headers
  leds-lp55xx: clean up definitions
  leds-lp55xx: clean up unused data and functions
  leds-lp55xx: clean up _remove()
  leds-lp55xx: add new function for removing device attribtues
  leds-lp55xx: code refactoring on selftest function
  leds-lp55xx: use common device attribute driver function
  leds-lp55xx: support device specific attributes
  leds-lp5523: use generic firmware interface
  leds-lp5521: use generic firmware interface
  leds-lp55xx: support firmware interface
  leds-lp55xx: add new lp55xx_register_sysfs() for the firmware interface
  ...
2013-02-26 09:29:02 -08:00
Linus Torvalds 5115f3c19d Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dmaengine updates from Vinod Koul:
 "This is fairly big pull by my standards as I had missed last merge
  window.  So we have the support for device tree for slave-dmaengine,
  large updates to dw_dmac driver from Andy for reusing on different
  architectures.  Along with this we have fixes on bunch of the drivers"

Fix up trivial conflicts, usually due to #include line movement next to
each other.

* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (111 commits)
  Revert "ARM: SPEAr13xx: Pass DW DMAC platform data from DT"
  ARM: dts: pl330: Add #dma-cells for generic dma binding support
  DMA: PL330: Register the DMA controller with the generic DMA helpers
  DMA: PL330: Add xlate function
  DMA: PL330: Add new pl330 filter for DT case.
  dma: tegra20-apb-dma: remove unnecessary assignment
  edma: do not waste memory for dma_mask
  dma: coh901318: set residue only if dma is in progress
  dma: coh901318: avoid unbalanced locking
  dmaengine.h: remove redundant else keyword
  dma: of-dma: protect list write operation by spin_lock
  dmaengine: ste_dma40: do not remove descriptors for cyclic transfers
  dma: of-dma.c: fix memory leakage
  dw_dmac: apply default dma_mask if needed
  dmaengine: ioat - fix spare sparse complain
  dmaengine: move drivers/of/dma.c -> drivers/dma/of-dma.c
  ioatdma: fix race between updating ioat->head and IOAT_COMPLETION_PENDING
  dw_dmac: add support for Lynxpoint DMA controllers
  dw_dmac: return proper residue value
  dw_dmac: fill individual length of descriptor
  ...
2013-02-26 09:24:48 -08:00
Vineet Gupta 7e0d306c37 ARC: Kconfig cleanup tracking cross-arch Kconfig pruning in merge window
Since ARC port was not yet upstream, we missed a bunch of cross-arch
Kconfig removals:

* GENERIC_SIGALTSTACK: d64008a8f3 "burying unused conditionals"
* HAVE_IRQ_WORK: 6147a9d807 "irq_work: Remove CONFIG_HAVE_IRQ_WORK"
* ARCH_NO_VIRT_TO_BUS: e0cf2ef484 "arch Kconfig: centralise
                                   CONFIG_ARCH_NO_VIRT_TO_BUS"

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-02-26 14:25:22 +05:30