Commit Graph

2177 Commits

Author SHA1 Message Date
Masahiro Yamada 973bbcfa17 pinctrl: mvebu: guard sub-directory with CONFIG_PINCTRL_MVEBU
CONFIG_PINCTRL_MVEBU is more suitable than CONFIG_PLAT_ORION
to guard the drivers/pinctrl/mvebu/ directory.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-01 10:41:03 +01:00
Masahiro Yamada 1bcb2021d5 pinctrl: berlin: guard sub-directory with CONFIG_PINCTRL_BERLIN
CONFIG_PINCTRL_BERLIN is more suitable than CONFIG_ARCH_BERLIN
to guard the drivers/pinctrl/berlin/ directory.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Jisheng Zhang <jszhang@marvell.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-01 10:39:26 +01:00
Masahiro Yamada b9a4e15545 pinctrl: uniphier: rework UniPhier pinctrl entries in Kconfig
There is a plan to support more pinctrl drivers for this SoC family.
Move the driver entries into a sub menu by using "menuconfig".
Also, add the missing dependency "depends on OF && MFD_SYSCON".

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-01 10:36:28 +01:00
Stephen Boyd eb9610f3d4 pinctrl: qcom: spmi-mpp: Add pm8994 mpp support
Update the driver and binding for pm8994-mpp devices.

Cc: <devicetree@vger.kernel.org>
Cc: "Ivan T. Ivanov" <iivanov@mm-sol.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Björn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-01 10:33:59 +01:00
Stephen Boyd 016c2f4d20 pinctrl: qcom: spmi-gpio: Add pm8994 gpio support
Update the binding and driver for pm8994-gpio devices.

Cc: <devicetree@vger.kernel.org>
Cc: "Ivan T. Ivanov" <iivanov@mm-sol.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Björn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-01 10:32:29 +01:00
Joonwoo Park d1b49b6860 pinctrl: qcom: Add msm8996 pinctrl driver
Add initial pinctrl driver to support pin configuration with
pinctrl framework for msm8996.

Cc: <devicetree@vger.kernel.org>
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
[sboyd@codeaurora.org: Remove duplicate entries and enums]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Björn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-01 10:29:03 +01:00
Stephen Boyd ab4256cfea pinctrl: qcom: pmic-gpio/mpp: of_irq_count() == npins
The number of interrupts is always equal to the number of pins
provided by the PMIC gpio and MPP hardware blocks. Count the
number of irqs to figure out the number of pins instead of adding
more compatible strings or doing math on the reg property. This
should make the code more generic and ease the number of changes
we have to make to the driver for each new pmic revision.

Cc: Ivan T. Ivanov <iivanov@mm-sol.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Andy Gross <agross@codeaurora.org>
Reviewed-by: Björn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-01 10:00:53 +01:00
Timur Tabi beee39099b pinctrl: qcom: qdf2xxx: improve error checking and reporting
The driver doesn't report an error message if the ACPI tables are missing
the num-gpios property (which indicates how many GPIOs there are on this
SOC), and it didn't check to ensure that the mallocs didn't fail.

Signed-off-by: Timur Tabi <timur@codeaurora.org>
Reviewed-by: Björn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-01 09:59:02 +01:00
Kuninori Morimoto 2d24fe675a pinctrl: sh-pfc: Share/reuse same PORT_GP_x() macros
Many SoC needs each PORT_GP_x() macros, but we can share/reuse
same one.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-11-30 13:41:35 +01:00
Geert Uytterhoeven a56069c46c pinctrl: sh-pfc: r8a7795: Add HSCIF pins, groups, and functions
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-30 13:41:34 +01:00
Geert Uytterhoeven fd1aa743b0 pinctrl: sh-pfc: r8a7795: Rename SEL_SCIF to SEL_SATA
Cfr. Manual Errata for Rev 0.50 of the R-Car Gen3 datasheet.

This has no user-visible impact.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-30 13:41:34 +01:00
Geert Uytterhoeven b8856085c3 pinctrl: sh-pfc: r8a7795: Make PORT_GP_x() macros consistent
On r8a7795, PORT_GP_x() is a macro for defining GPIOs 0..x.
In all other sh-pfc code, PORT_GP_x() is a macro for defining GPIOs
0..(x-1).

Make the r8a7795 macro definitions consistent with the rest of the
sh-pfc codebase.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2015-11-30 13:41:33 +01:00
Geert Uytterhoeven 61a483ff80 pinctrl: sh-pfc: r8a7794: Use PINMUX_SINGLE() instead of raw PINMUX_DATA()
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2015-11-30 13:41:32 +01:00
Geert Uytterhoeven bc3341ddae pinctrl: sh-pfc: r8a7791: Use PINMUX_SINGLE() instead of raw PINMUX_DATA()
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2015-11-30 13:41:32 +01:00
Geert Uytterhoeven 01af9ecbd7 pinctrl: sh-pfc: r8a7790: Use PINMUX_SINGLE() instead of raw PINMUX_DATA()
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2015-11-30 13:41:31 +01:00
Geert Uytterhoeven dcd803bebc pinctrl: sh-pfc: Add PINMUX_SINGLE()
Add a macro to describe a pinmux configuration for a single-function
pin.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2015-11-30 13:41:31 +01:00
John Crispin 57b588c950 pinctrl/lantiq: Fix GPIO Setup of GPIO Port3
Some special handling of GPIO Port 3 is needed because of
some hardware thingofabob.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Martin Schiller <mschiller@tdt.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-30 13:16:34 +01:00
Martin Schiller be14811c03 pinctrl/lantiq: introduce new dedicated devicetree bindings
This patch introduces new dedicated "lantiq,<chip>-pinctrl" devicetree
bindings, where <chip> is one of "ase", "danube", "xrx100", "xrx200" or
"xrx300" and marks the "lantiq,pinctrl-xway", "lantiq,pinctrl-ase" and
"lantiq,pinctrl-xr9" bindings as DEPRECATED.

Based on the newest Lantiq Hardware Description it turend out, that there are
some differences in the GPIO alternative functions of the Danube, xRX100 and
xRX200 families, which makes it impossible to use only one xway_mfp table.

This patch also adds support for the xRX300 family.

Signed-off-by: Martin Schiller <mschiller@tdt.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-30 13:12:07 +01:00
Arnd Bergmann 32844138e3 pinctrl: at91-pio4: use %pr format string for resource
resource_size_t may be defined as 32 or 64 bit depending on configuration,
so it cannot be printed using the normal format strings, as gcc correctly
warns:

pinctrl-at91-pio4.c: In function 'atmel_pinctrl_probe':
pinctrl-at91-pio4.c:1003:41: warning: format '%u' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t {aka long long unsigned int}' [-Wformat=]
   dev_dbg(dev, "bank %i: hwirq=%u\n", i, res->start);

This changes the format string to use the special "%pr" format
string that prints a resource, and changes the arguments so we
the resource structure directly.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-30 09:46:11 +01:00
Pramod Kumar 616043d58a pinctrl: Rename gpio driver from cygnus to iproc
Rename gpio driver file name from pinctrl-cygnus-gpio.c to
pinctrl-iproc-gpio.c to make it more generic so that all
iproc based future SoCs using the same gpio block could
use this driver.

Signed-off-by: Pramod Kumar <pramodku@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-30 09:44:05 +01:00
Pramod Kumar afc8c78d17 gpio: Rename func/macro/var to IP-block,iproc
Change functions, macros and variables name from cygnus to IP block,
iproc, so that it could be used in all iproc based future SoCs having
same GPIO controller block.

Signed-off-by: Pramod Kumar <pramodku@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-30 09:40:05 +01:00
Pramod Kumar 462de62994 pinctrl: Add new compatible string to GPIO controller driver
This compatible string should be used for all new iproc based future
SoCs having the same GPIO controller hardware.

Signed-off-by: Pramod Kumar <pramodku@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-30 09:37:24 +01:00
Pramod Kumar e1aaaf3ff3 pinctrl: use ngpios propety from DT
Since identical hardware is used in several instances and every
instance will have different in-use pins. Hence extracting this
number from DT via "ngpios" property.

Signed-off-by: Pramod Kumar <pramodku@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-30 09:36:14 +01:00
Hongzhou Yang b04a23b056 pinctrl: mediatek: fix a memleak when do dt maps.
configs will kmemdup to dup_configs in pictrl util function.
So configs need to be freed.

Signed-off-by: Hongzhou Yang <hongzhou.yang@mediatek.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-29 22:34:39 +01:00
Linus Walleij 58383c7842 gpio: change member .dev to .parent
The name .dev in a struct is normally reserved for a struct device
that is let us say a superclass to the thing described by the struct.
struct gpio_chip stands out by confusingly using a struct device *dev
to point to the parent device (such as a platform_device) that
represents the hardware. As we want to give gpio_chip:s real devices,
this is not working. We need to rename this member to parent.

This was done by two coccinelle scripts, I guess it is possible to
combine them into one, but I don't know such stuff. They look like
this:

@@
struct gpio_chip *var;
@@
-var->dev
+var->parent

and:

@@
struct gpio_chip var;
@@
-var.dev
+var.parent

and:

@@
struct bgpio_chip *var;
@@
-var->gc.dev
+var->gc.parent

Plus a few instances of bgpio that I couldn't figure out how
to teach Coccinelle to rewrite.

This patch hits all over the place, but I *strongly* prefer this
solution to any piecemal approaches that just exercise patch
mechanics all over the place. It mainly hits drivers/gpio and
drivers/pinctrl which is my own backyard anyway.

Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Alek Du <alek.du@intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-19 09:24:35 +01:00
Hongzhou Yang f97c230966 pinctrl: mediatek: Add get_direction support.
Since Linux gpio framework return 0 for output, 1 for input.
But HW use 0 stands for input, and 1 stands for output.
So use negative to correct it.

And gpio_chip.get is used to get input value, no need to get
output value, so removing it.

Signed-off-by: Hongzhou Yang <hongzhou.yang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-18 14:55:07 +01:00
Arnd Bergmann c3dd25cc78 pinctrl: fix qcom ssbi drivers for 64-bit compilation
When building pinctrl-ssbi-gpio and pinctrl-ssbi-mpp for ARM64, we get
a compile warning about invalid types:

drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c: In function 'pm8xxx_gpio_probe':
drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c:675:17: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
drivers/pinctrl/qcom/pinctrl-ssbi-mpp.c: In function 'pm8xxx_mpp_probe':
drivers/pinctrl/qcom/pinctrl-ssbi-mpp.c:766:17: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]

This changes the code so we cast the pointer to 'unsigned long', which
is the right thing to do here.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-17 15:34:06 +01:00
Vaishali Thakkar 0563df2ce7 pinctrl: imx1-core: add missing of_node_put
for_each_child_of_node performs an of_node_get on each iteration,
so of_node_put is required on break out of the loop.

This is done using Coccinelle. And semantic patch used for this is
as follows:

@@
expression root,e;
local idexpression child;
@@

 for_each_child_of_node(root, child) {
   ... when != of_node_put(child)
       when != e = child
(
   return child;
|
+  of_node_put(child);
?  return ...;
)
   ...
 }

Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-17 15:01:37 +01:00
Markus Elfring f10a258581 pinctrl: Delete unnecessary checks
The pinctrl_unregister() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-17 11:49:50 +01:00
Masahiro Yamada 932cb83962 pinctrl: remove redundant if conditional from Kconfig
The whole menu is guarded by

  menu "Pin controllers"
          depends on PINCTRL
      ...
  endmenu

The if conditional outside of it is redundant.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-17 11:47:47 +01:00
Hakjoo Kim 023e06dfa6 pinctrl: exynos: add exynos5410 SoC specific data
Add Samsung EXYNOS5410 SoC specific data to enable pinctrl
support for all platforms based on EXYNOS5410.

Signed-off-by: Hakjoo Kim <ruppi.kim@hardkernel.com>
[AF: Rebased onto Exynos5260, irq_chip consolidation, const'ification]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Tomasz Figa <tomasz.figa@gmail.com>
Tested-by: Pavel Fedin <p.fedin@samsung.com>
[k.kozlowski: Rebased on current v4.3]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-11-16 10:54:43 +09:00
Linus Torvalds e86328c489 This is the bulk of GPIO changes for v4.4:
GPIO core:
 - Define and handle flags for open drain/open collector
   and open source/open emitter, also know as "single-ended"
   configurations.
 - Generic request/free operations that handle calling out
   to the (optional) pin control backend.
 - Some refactoring related to an ABI change that did not
   happen, yet provide useful.
 - Added a real-time compliance checklist. Many GPIO chips
   have irqchips, and need to think this over with the RT
   patches going upstream.
 - Restructure, fix and clean up Kconfig menus a bit.
 
 New drivers:
 - New driver for AMD Promony.
 - New driver for ACCES 104-IDIO-16, a port-mapped I/O
   card, ISA-style. Very retro.
 
 Subdriver changes:
 - OMAP changes to handle real time requirements.
 - Handle trigger types for edge and level IRQs on PL061
   properly. As this hardware is very common it needs to
   set a proper example for others to follow.
 - Some container_of() cleanups.
 - Delete the unused MSM driver in favor of the driver that
   is embedded inside the pin control driver.
 - Cleanup of the ath79 GPIO driver used by many, many
   OpenWRT router targets.
 - A consolidated IT87xx driver replacing the earlier
   very specific IT8761e driver.
 - Handle the TI TCA9539 in the PCA953x driver. Also
   handle ACPI devices in this subdriver.
 - Drop xilinx arch dependencies as these FPGAs seem to
   profilate over a few different architectures. MIPS and
   ARM come to mind.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWNz3qAAoJEEEQszewGV1zKlAP/R+mVoQHyfDFurChDzuWQjZK
 T4eDiFGTHr/MUDP9I0jINF400SfEm3ajm3aoPvKc6fA2d7oLNB7TzyUxjDsQV4h8
 NsCJ9IYD9xYgF6SDovPYPZ6SkRJYimDrwjD/DUSR8ijisVzJwYCyEGznelWKnQMo
 Fcw4kOTMrW0034ZT4nGH4kSgIzNAMcecazaaqLisniYZ/4Ozk1CQsrBK1gCO/kr8
 Hh3N/mN4TBvOyIuD7lmN5PnWuJo641rplcWErjxUZYvqEddSfAnpasfAcXMkZ4gM
 jOK+l7VIycxOAn+EJwqjyVPJ0gDPPaMwB836gogzNraO2SYd/R2JvyI2zyTogmdW
 MNwsKwP2b/ma/h0A/JBDFmcMiJwA2QHHgylLrB+vfWAP9o2nJv++Op1/q8ktVR+1
 EgEk9StVvnYqC86DJhYbUbMmX7TorRwPoUo/5Z6C/viyZzOagZge0vYKYTQS99Pq
 B+2aH7pMPLooAdU/cyYy8J20mxQ4RaHoy+TCe0RMRhxnRi9CnnnYNHbZDVdHISpr
 OSfZKSM40DbAAs7UNxIgPXM1qSzia23tgzZEdh5qwQtZBTC6fWr/1xOrTpFW2wY6
 VxqgP/OX23BzJQE4YDnOHLIj8GX0MLqXr7pl2+KBcHO9xvPS6Qj8fFsLEVatCwX0
 Caify6KIbbgMWcVmut/6
 =LDCr
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "Here is the bulk of GPIO changes for the v4.4 development cycle.

  The only changes hitting outside drivers/gpio are in the pin control
  subsystem and these seem to have settled nicely in linux-next.

  Development mistakes and catfights are nicely documented in the
  reverts as you can see.  The outcome of the ABI fight is that we're
  working on a chardev ABI for GPIO now, where hope to show results for
  the v4.5 kernel.

  Summary of changes:

  GPIO core:
   - Define and handle flags for open drain/open collector and open
     source/open emitter, also know as "single-ended" configurations.
   - Generic request/free operations that handle calling out to the
     (optional) pin control backend.
   - Some refactoring related to an ABI change that did not happen, yet
     provide useful.
   - Added a real-time compliance checklist.  Many GPIO chips have
     irqchips, and need to think this over with the RT patches going
     upstream.
   - Restructure, fix and clean up Kconfig menus a bit.

  New drivers:
   - New driver for AMD Promony.
   - New driver for ACCES 104-IDIO-16, a port-mapped I/O card,
     ISA-style.  Very retro.

  Subdriver changes:
   - OMAP changes to handle real time requirements.
   - Handle trigger types for edge and level IRQs on PL061 properly.  As
     this hardware is very common it needs to set a proper example for
     others to follow.
   - Some container_of() cleanups.
   - Delete the unused MSM driver in favor of the driver that is
     embedded inside the pin control driver.
   - Cleanup of the ath79 GPIO driver used by many, many OpenWRT router
     targets.
   - A consolidated IT87xx driver replacing the earlier very specific
     IT8761e driver.
   - Handle the TI TCA9539 in the PCA953x driver.  Also handle ACPI
     devices in this subdriver.
   - Drop xilinx arch dependencies as these FPGAs seem to profilate over
     a few different architectures.  MIPS and ARM come to mind"

* tag 'gpio-v4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (57 commits)
  gpio: fix up SPI submenu
  gpio: drop surplus I2C dependencies
  gpio: drop surplus X86 dependencies
  gpio: dt-bindings: document the official use of "ngpios"
  gpio: MAINTAINERS: Add an entry for the ATH79 GPIO driver
  gpio / ACPI: Allow shared GPIO event to be read via operation region
  gpio: group port-mapped I/O drivers in a menu
  gpio: Add ACCES 104-IDIO-16 driver maintainer entry
  gpio: zynq: Document interrupt-controller DT binding
  gpio: xilinx: Drop architecture dependencies
  gpio: generic: Revert to old error handling in bgpio_map
  gpio: add a real time compliance notes
  Revert "gpio: add a real time compliance checklist"
  gpio: Add GPIO support for the ACCES 104-IDIO-16
  gpio: driver for AMD Promontory
  gpio: xlp: Convert to use gpiolib irqchip helpers
  gpio: add a real time compliance checklist
  gpio/xilinx: enable for MIPS
  gpiolib: Add and use OF_GPIO_SINGLE_ENDED flag
  gpiolib: Split GPIO flags parsing and GPIO configuration
  ...
2015-11-02 12:59:12 -08:00
Linus Torvalds bc9d8c20ff This is the big bulk of pin control changes for the
v4.4 kernel development cycle:
 
 Infrastructure:
 - Doug Anderson wrote a patch adding an "init" state
   different from the "default" state for pin control
   state handling in the core framework. This is applied
   before the driver's probe() call if defined and takes
   precedence over "default". If both are defined, "init"
   will be applied *before* probe() and "default" will be
   applied *after* probe().
 
 Significant subdriver improvements:
 - SH PFC is switched to getting GPIO ranges from the
   device tree ranges property on DT platforms.
 - Got rid of CONFIG_ARCH_SHMOBILE_LEGACY, we are all
   modernized.
 - Got rid of SH PFC hardcoded IRQ numbers.
 - Allwinner sunxi external interrupt through the "r"
   controller.
 - Moved the Cygnus driver to use DT-provided GPIO
   ranges.
 
 New drivers:
 - Atmel PIO4 pin controller for the SAMA4D2 family
 
 New subdrivers:
 - Rockchip RK3036 subdriver
 - Renesas SH PFC R8A7795 subdriver
 - Allwinner sunxi A83T PIO subdriver
 - Freescale i.MX7d iomux lpsr subdriver
 - Marvell Berlin BG4CT subdriver
 - SiRF Atlas 7 step B SoC subdriver
 - Intel Broxton SoC subdriver
 
 Apart from this, the usual slew if syntactic and semantic
 fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWNzaFAAoJEEEQszewGV1zth0QAIWBhrEFeZNw3yewSwtawBin
 Q+5hxxld7YWeYykK/phRw+nru+tRmRKd72uZbiA/OHDFmXdlF7ecQC+D2ByAT/a3
 /d61BPtuT0tzmiZTmYSdbivBZzXjs9UrbEsGe2MXgf2WJuzZU/2EiQwCxklDfiX6
 BWa0lcL9+ikVRh53xGoEps/5KVOkXSlPDq/twXp6Trd6B1k+opPqKHf7UNxb0BvK
 0QoNPDYBTb93Z9iIItQdAGNCD/JMllywpUcqK+tPdQoRdrqlAcdRlUdXI7rdtvGw
 O3O2/MTBrGI7pxCNxBPGi9+niM6qtLrwKeQx8iIe0ieTIrUCCdg3vftUXctxXHkC
 +GxKLQGO/aMqW/4O8J+voAOD5HiGc+heoJsQEWoysoooWos/IxVJiiCKy5RNTk7g
 ECbzQvu7kbwTnwNXbxAc5ocdwhQ6HpJe2X2S52zTpDscfK8HcOow0hmf9m2EI4hV
 ikf47WJQIN9zunJloiJ3oZveK0Eytx1hH/47gcFRwr0KV/DK0KngvxnPWlB2nzlc
 pggkVnkHXczCyqBfDhZomILnTK2aDt6RKUZhz4w1s8ezK2EDn8Vvt3Qm7wOIeWvR
 xiY7XVoO+AYOywuFsbNxkt28Y8h5yQxu/AV6/rYSn+NYCZcLxKbcrVEiY2N6ecCA
 x74epIdnjA8F7S3Xp14q
 =0t3B
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the big bulk of pin control changes for the v4.4 kernel
  development cycle.  Development pace is high in pin control again this
  merge window.  28 contributors, 83 patches.

  It hits a few sites outside the pin control subsystem:

   - Device tree bindings in Documentation (as usual)
   - MAINTAINERS
   - drivers/base/* for the "init" state handling by Doug Anderson.
     This has been ACKed by Greg.
   - drivers/usb/renesas_usbhs/rcar2.c, for a dependent Renesas change
     in the USB subsystem.  This has been ACKed by both Greg and Felipe.
   - arch/arm/boot/dts/sama5d2.dtsi - this should ideally have gone
     through the ARM SoC tree but ended up here.

  This time I am using Geert Uytterhoeven as submaintainer for SH PFC
  since the are three-four people working in parallel with new Renesas
  ASICs.

  Summary of changes:

  Infrastructure:

   - Doug Anderson wrote a patch adding an "init" state different from
     the "default" state for pin control state handling in the core
     framework.  This is applied before the driver's probe() call if
     defined and takes precedence over "default".  If both are defined,
     "init" will be applied *before* probe() and "default" will be
     applied *after* probe().

  Significant subdriver improvements:

   - SH PFC is switched to getting GPIO ranges from the device tree
     ranges property on DT platforms.
   - Got rid of CONFIG_ARCH_SHMOBILE_LEGACY, we are all modernized.
   - Got rid of SH PFC hardcoded IRQ numbers.
   - Allwinner sunxi external interrupt through the "r" controller.
   - Moved the Cygnus driver to use DT-provided GPIO ranges.

  New drivers:

   - Atmel PIO4 pin controller for the SAMA4D2 family

  New subdrivers:

   - Rockchip RK3036 subdriver
   - Renesas SH PFC R8A7795 subdriver
   - Allwinner sunxi A83T PIO subdriver
   - Freescale i.MX7d iomux lpsr subdriver
   - Marvell Berlin BG4CT subdriver
   - SiRF Atlas 7 step B SoC subdriver
   - Intel Broxton SoC subdriver

  Apart from this, the usual slew if syntactic and semantic fixes"

* tag 'pinctrl-v4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (81 commits)
  pinctrl: pinconf: remove needless loop
  pinctrl: uniphier: guard uniphier directory with CONFIG_PINCTRL_UNIPHIER
  pinctrl: zynq: fix UTF-8 errors
  pinctrl: zynq: Initialize early
  pinctrl: at91: add missing of_node_put
  pinctrl: tegra-xusb: Correct lane mux options
  pinctrl: intel: Add Intel Broxton pin controller support
  pinctrl: intel: Allow requesting pins which are in ACPI mode as GPIOs
  pinctrl: intel: Add support for multiple GPIO chips sharing the interrupt
  drivers/pinctrl: Add the concept of an "init" state
  pinctrl: uniphier: set input-enable before pin-muxing
  pinctrl: cygnus: Add new compatible string for gpio controller driver
  pinctrl: cygnus: Remove GPIO to Pinctrl pin mapping from driver
  pinctrl: cygnus: Optional DT property to support pin mappings
  pinctrl: sunxi: Add irq pinmuxing to sun6i "r" pincontroller
  pinctrl: sunxi: Fix irq_of_xlate for the r_pio pinctrl block
  pinctrl: sh-pfc: Remove obsolete r8a7778 platform_device_id entry
  pinctrl: sh-pfc: Remove obsolete r8a7779 platform_device_id entry
  pinctrl: sh-pfc: Stop including <linux/platform_data/gpio-rcar.h>
  usb: renesas_usbhs: Remove unneeded #include <linux/platform_data/gpio-rcar.h>
  ...
2015-11-02 12:30:39 -08:00
Laurent Meunier d99c8053fc pinctrl: pinconf: remove needless loop
This removes a needless loop which was caught in pinconf.c.

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Laurent Meunier <laurent.meunier@st.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-31 22:13:07 +01:00
Masahiro Yamada 241297c2af pinctrl: uniphier: guard uniphier directory with CONFIG_PINCTRL_UNIPHIER
CONFIG_PINCTRL_UNIPHIER is more suitable than CONFIG_ARCH_UNIPHIER
to guard the drivers/pinctrl/uniphier directory.

The current CONFIG_PINCTRL_UNIPHIER_CORE is a bit long
(it would break the indentation in drivers/pinctrl/Makefile),
so rename it into CONFIG_PINCTRL_UNIPHIER.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-31 22:13:07 +01:00
Linus Walleij a7c6f30c02 pinctrl: zynq: fix UTF-8 errors
Fix up Sören's name in the Zynq driver. I caused this. I fix it.

Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-31 22:12:59 +01:00
Mike Looijmans 13e3008fae pinctrl: zynq: Initialize early
Supplying pinmux configuration for e.g. gpio pins leads to deferred
probes because the pinctrl device is probed much later than gpio.
Move the init call to a much earlier stage so it probes before the
devices that may need it.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Tested-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-30 10:40:57 +01:00
Julia Lawall d94b986aa7 pinctrl: at91: add missing of_node_put
for_each_child_of_node performs an of_node_get on each iteration, so
a break out of the loop requires an of_node_put.

A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):

// <smpl>
@@
expression root,e;
local idexpression child;
@@

 for_each_child_of_node(root, child) {
   ... when != of_node_put(child)
       when != e = child
(
   return child;
|
+  of_node_put(child);
?  return ...;
)
   ...
 }
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-27 17:17:11 +01:00
Jon Hunter 9d4cc85d29 pinctrl: tegra-xusb: Correct lane mux options
The description of the XUSB_PADCTL_USB3_PAD_MUX_0 register in the Tegra124
documentation implies that all functions (pcie, usb3 and sata) can be
muxed onto to all lanes (pcie lanes 0-4 and sata lane 0). However, it has
been confirmed that this is not the case and the mux'ing options much more
limited. Unfortunately, the public documentation has not been updated to
reflect this and so detail the actual mux'ing options here by function:

Function:		Lanes:
pcie1 x2:		pcie3, pcie4
pcie1 x4:		pcie1, pcie2, pcie3, pcie4
pcie2 x1 (option1):	pcie0
pcie2 x1 (option2):	pcie2
usb3 port 0:		pcie0
usb3 port 1 (option 1):	pcie1
usb3 port 1 (option 2):	sata0
sata:			sata0

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-27 17:06:23 +01:00
Mika Westerberg ee1a6ca43d pinctrl: intel: Add Intel Broxton pin controller support
This driver adds pinctrl/GPIO support for Intel Broxton. The GPIO
controller is based on the same hardware design that is already used in
Intel Sunrisepoint so we leverage the core driver here.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-27 13:32:13 +01:00
Mika Westerberg 4341e8a545 pinctrl: intel: Allow requesting pins which are in ACPI mode as GPIOs
Reserved for ACPI actually means that in such case the GPIO hardware will
not update the interrupt status register (GPI_IS) even if the pin is
configured to trigger an interrupt. It will update GPI_GPE_STS instead and
does not trigger an interrupt.

Allow using such pins as GPIOs, only prevent their usage as interrupts.

We also rename function intel_pad_reserved_for_acpi() to be
intel_pad_acpi_mode() which reflects the actual meaning better.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-27 13:30:56 +01:00
Mika Westerberg 193b40c825 pinctrl: intel: Add support for multiple GPIO chips sharing the interrupt
On Intel Broxton the GPIO hardware consists of several chips that all share
the parent interrupt. It is not possible to handle this by setting chained
handler for each chip (as they will overwrite each other).

To overcome this we need to request the interrupt using devm_request_irq()
and pass IRQF_SHARED with the flags.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-27 13:27:49 +01:00
Douglas Anderson ef0eebc051 drivers/pinctrl: Add the concept of an "init" state
For pinctrl the "default" state is applied to pins before the driver's
probe function is called.  This is normally a sensible thing to do,
but in some cases can cause problems.  That's because the pins will
change state before the driver is given a chance to program how those
pins should behave.

As an example you might have a regulator that is controlled by a PWM
(output high = high voltage, output low = low voltage).  The firmware
might leave this pin as driven high.  If we allow the driver core to
reconfigure this pin as a PWM pin before the PWM's probe function runs
then you might end up running at too low of a voltage while we probe.

Let's introudce a new "init" state.  If this is defined we'll set
pinctrl to this state before probe and then "default" after probe
(unless the driver explicitly changed states already).

An alternative idea that was thought of was to use the pre-existing
"sleep" or "idle" states and add a boolean property that we should
start in that mode.  This was not done because the "init" state is
needed for correctness and those other states are only present (and
only transitioned in to and out of) when (optional) power management
is enabled.

Changes in v3:
- Moved declarations to pinctrl/devinfo.h
- Fixed author/SoB

Changes in v2:
- Added comment to pinctrl_init_done() as per Linus W.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-27 11:24:23 +01:00
Masahiro Yamada bac7f4c1bf pinctrl: uniphier: set input-enable before pin-muxing
While IECTRL is disabled, input signals are pulled-down internally.
If pin-muxing is set up first, glitch signals (Low to High transition)
might be input to hardware blocks.

Bad case scenario:
[1] The hardware block is already running before pinctrl is handled.
   (the reset is de-asserted by default or by a firmware, for example)
[2] The pin-muxing is set up.  The input signals to hardware block
    are pulled-down by the chip-internal biasing.
[3] The pins are input-enabled.  The signals from the board reach the
    hardware block.

Actually, one invalid character is input to the UART blocks for such
SoCs as PH1-LD4, PH1-sLD8, where UART devices start to run at the
power on reset.

To avoid such problems, pins should be input-enabled before muxing.

Fixes: 6e90889202 ("pinctrl: UniPhier: add UniPhier pinctrl core support")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reported-by: Dai Okamura <okamura.dai@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-27 11:07:49 +01:00
Pramod Kumar ea92211c08 pinctrl: cygnus: Remove GPIO to Pinctrl pin mapping from driver
Remove gpio to pinctrl pin mapping code from driver and
address this through standard property "gpio-ranges".

Signed-off-by: Pramod Kumar <pramodku@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-27 10:44:57 +01:00
Linus Walleij 10af309a86 Merge branch 'sh-pfc-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel 2015-10-26 14:49:11 +01:00
Hans de Goede 3f84ccf62c pinctrl: sunxi: Add irq pinmuxing to sun6i "r" pincontroller
Add pinmuxing for external interrupt functionality through the
sun6i "r" pincontroller.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-23 10:13:30 +02:00
Hans de Goede 8297992cad pinctrl: sunxi: Fix irq_of_xlate for the r_pio pinctrl block
The r_pio gpio / pin controller has a pin_base of non 0, we need to
adjust for this before calling sunxi_pinctrl_desc_find_function_by_pin.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-23 10:11:34 +02:00
Geert Uytterhoeven 660c40bd98 pinctrl: sh-pfc: Remove obsolete r8a7778 platform_device_id entry
Since the removal of the r8a7778 legacy SoC code in commit
4baadb9e05 ("ARM: shmobile: r8a7778: remove obsolete setup code"),
r8a7778 is only supported in generic DT-only ARM multi-platform builds.
The driver doesn't need to match platform devices by name anymore, hence
remove the corresponding platform_device_id entry.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-20 16:11:27 +02:00
Geert Uytterhoeven 5eb6fc210e pinctrl: sh-pfc: Remove obsolete r8a7779 platform_device_id entry
Since the removal of the r8a7779 legacy SoC code in commit
c99cd90d98 ("ARM: shmobile: r8a7779: Remove legacy SoC code"),
r8a7779 is only supported in generic DT-only ARM multi-platform builds.
The driver doesn't need to match platform devices by name anymore, hence
remove the corresponding platform_device_id entry.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-20 16:11:26 +02:00
Geert Uytterhoeven 69af775a18 pinctrl: sh-pfc: Stop including <linux/platform_data/gpio-rcar.h>
This header file will be removed soon.

Copy the helper macro RCAR_GP_PIN(), which is used by the pinctrl
drivers only, to sh_pfc.h, and drop the #include.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-20 16:03:40 +02:00
Geert Uytterhoeven b8b47d678a pinctrl: sh-pfc: Rename .gpio_data[] to .pinmux_data[]
The sh_pfc_soc_info.gpio_data[] array contains not only GPIO data, but
also various other pinmux-related data (functions and marks).
Every single driver already calls its local array pinmux_data[].
Hence rename the sh_pfc_soc_info member to "pinmux_data".

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2015-10-20 16:03:30 +02:00
Ulrich Hecht ae7465a097 pinctrl: sh-pfc: r8a7778: Add bias (pull-up) pinconf support
On this SoC there is no simple mapping of GP pins to pull-up register
bits, so we need a table.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-20 16:03:28 +02:00
Ulrich Hecht 22768fc60a pinctrl: sh-pfc: Add macros defining GP ports with config flags
PORT_GP_CFG_1 and PORT_GP_CFG_32 work like their non-CFG counterparts
but accept an extra argument with config flags.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-20 16:03:26 +02:00
Koji Matsuoka 0f7711aa30 pinctrl: sh-pfc: r8a7794: Add VIN pin groups
Add VIN0/1 pin groups to R8A7794 PFC driver.

Sergei:  rebased, renamed, added changelog, gathered 12  VIN1 data pins into
a single pin group, added "vin1_data10" pin group, used 'union vin_data' and
VIN_DATA_PIN_GROUP() macro to describe VIN1 pins, reversed the order of  the
VIN1 pin groups, removed unneeded empty lines, fixed  VIN1 separator comment.

Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-20 16:03:16 +02:00
Sergei Shtylyov 423caa5253 pinctrl: sh-pfc: r8a779[01]: Move 'union vin_data' to shared header file
R8A7790/1 PFC  drivers use almost identical  'union vin_data' and completely
identical VIN_DATA_PIN_GROUP() macro; we thus can  move them into the shared
header file...

Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-20 16:03:10 +02:00
Mika Westerberg ec879f1272 pinctrl: baytrail: Fix compilation warnings when !CONFIG_PM
When CONFIG_PM is not set we get following compilation warnings:

 warning: ‘byt_gpio_runtime_suspend’ defined but not used [-Wunused-function]
 warning: ‘byt_gpio_runtime_resume’ defined but not used [-Wunused-function]

Fix this by guarding byt_gpio_runtime_suspend()/byt_gpio_runtime_resume()
with #ifdef CONFIG_PM.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-16 22:54:33 +02:00
Mika Westerberg f487bbf309 pinctrl: intel: Fix compilation warning when !CONFIG_PM_SLEEP
We get following warning when CONFIG_PM_SLEEP is not set

  warning: ‘intel_gpio_irq_init’ defined but not used [-Wunused-function]

Since the function is only called from intel_pinctrl_resume() move it
inside CONFIG_PM_SLEEP guard as well.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-16 22:53:40 +02:00
Jonas Gorski 11091fb0a1 pinctrl: qcom: ssbi: fix compilation with DEBUG_FS=n
The DEBUG_FS=n #defines for the dbg_show functions were missed when
renaming the driver from msm_ to pm8xxx_, causing it to break the build
when DEBUG_FS isn't enabled:

  CC [M]  drivers/pinctrl/qcom/pinctrl-ssbi-gpio.o
drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c:597:14: error: ‘pm8xxx_gpio_dbg_show’ undeclared here (not in a function)
  .dbg_show = pm8xxx_gpio_dbg_show,

Fix this by renaming them correctly.

Fixes: b4c45fe974 ("pinctrl: qcom: ssbi: Family A gpio & mpp drivers")
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-16 22:35:52 +02:00
Jonas Gorski 98c85d583a pinctrl: replace trivial implementations of gpio_chip request/free
Replace all trivial request/free callbacks that do nothing but call into
pinctrl code with the generic versions.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Andrew Bresticker <abrestic@chromium.org>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-16 22:20:21 +02:00
Wei Chen 3fa508cd23 pinctrl: atlas7: support atlas7 step B changes
The the pin groups and pin functions have been changed
in atlas7 step B soc. We have to update the driver
to support step B chip.

Changes:
1. add 5 jtag pins to IOC_TOP:
	"jtag_tdo", "jtag_tms","jtag_tck", "jtag_tdi", "jtag_trstn"
	these 5 pins can be mutiplex with other functions, so we
	have to conver these 5 pins in pinmux.
2. add pin groups for audio digmic, audio spdif, can transceiver
	en, can transceiver stb, i2s0, i2s1 and jtag.
3. serval pins can be located to more PADs:
	audio_uart0_urfs, audio_uart1_urfs, audio_uart2_urfs,
	audio_uart2_urxd, audio_uart2_usclk, audio_uart2_utfs,
	audio_uart2_utxd, can0_rxd, can0_txd, can1_rxd, can1_txd
	jtag_ntrst, jtag_swdiotms, jtag_tck, jtag_tdi, jtag_tdo,
	pw_cko0, pw_cko1, pw_i2s01, pw_pwm0, pw_pwm1, sd2_cdb,
	sd2_wpb, uart2_cts, uart2_rts, uart2_rxd, uart2_txd,
	uart3_cts, uart3_rts, uart3_rxd, uart3_txd, uart4_cts,
	uart4_rts, usb0_drvvbus, usb1_drvvbus.

Because of Changes#3, some functions should have more than one
pin groups. So we have to split the original pin group to serval
pin groups.

For example:
audio_uart0 has 5 pins, on STEPA, each of these 5 pins only has
one related PAD. But on STEPB, audio_uart0_urfs has 4 related
PAD.
So we place the 4 pins with one PAD into a single pin group:
	audio_uart0_basic_group.
and place urfs pin wtih different PADs to 4 different pin groups:
	audio_uart0_urfs_group0, ..., audio_uart0_urfs_group3

A full audio_uart0 pin group can be:
	pinctrl-0 = <&audio_uart0_basic_group &audio_uart0_urfs_group0>;
If audio_uart0 pin group encountered some confiction, we only have
to change the urfs group:
	pinctrl-0 = <&audio_uart0_basic_group &audio_uart0_urfs_group2>;

Signed-off-by: Wei Chen <Wei.Chen@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-16 21:56:07 +02:00
Thomas Hebb 3c6531c746 pinctrl: berlin: fix BG2CD field widths
The previous register layout was incorrect, many of the fields having
fewer bits than were needed to represent all their modes. The new layout
is taken from the bootloader source of a BG2CD device.

Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-16 16:42:48 +02:00
Antoine Ténart 1d48fb6e4a pinctrl: berlin: fix my family name spelling
My family name contained an accent when I submitted the
Berlin pinctrl series in the first place. There was an
encoding issue when the series was applied. Fix this.

Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
[Je me rendis tous les accents aigus]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-16 16:28:57 +02:00
Antoine Tenart 9c160bbd6c pinctrl: berlin: add explicit dependency on OF
Berlin pinctrl drivers depends on CONFIG_OF. This patch adds
this dependency explicitly.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-16 16:20:04 +02:00
Antoine Tenart d02f997d61 pinctrl: berlin: select the pinctrl driver according to the SoC used
This patch prepares to remove the pinctrl driver selection from the
mach-berlin Kconfig. To do so, bool is replaced by def_bool.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-16 16:18:27 +02:00
Jisheng Zhang bb3ba9558a pinctrl: berlin: add the berlin4ct pinctrl driver
Add the pin-controller driver for Marvell Berlin BG4CT SoC, with definition
of its groups and functions. This uses the core Berlin pinctrl driver.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-16 16:13:20 +02:00
Jisheng Zhang 2df26ef7da pinctrl: berlin: Make berlin pinctrl driver visible if COMPILE_TEST=y
It is good to allow berlin pinctrl driver to build with COMPILE_TEST, so
make the it menu visible when compile-testing.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-16 16:12:17 +02:00
Jisheng Zhang d5c79fcb19 pinctrl: berlin: introduce berlin_pinctrl_probe_regmap()
This is to prepare for the next berlin4ct support, where we won't use
simple-mfd any more.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-16 16:10:57 +02:00
Masahiro Yamada 69c308e2bc pinctrl: pinconf-generic: add "input-schmitt" DT property
PIN_CONFIG_INPUT_SCHMITT is defined in enum_pin_config_param,
but the corresponding DT property is missing.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02 15:09:11 -07:00
Masahiro Yamada 3c4b23dd71 pinctrl: pinconf-generic: sort pin configuration params alphabetically
Currently, the dt_params array in drivers/pinctrl/pinconf-generic.c
is not sorted in the same order as the enum pin_config_param in
include/linux/pinctrl/pinconf-generic.h.

Sort enum pin_config_param, conf_items, dt_params, alphabetically
for consistency.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02 15:07:27 -07:00
Ludovic Desroches 89092fb070 pinctrl: at91-pio4: irq argument as been removed from irq flow handlers
Irq argument as been removed from irq flow handlers so use the irq
descriptor to retrieve data we need.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02 14:52:20 -07:00
Ludovic Desroches 3fd550c6b3 pinctrl: at91-pio4: use irq_set_handler_locked
Use irq_set_handler_locked() as it avoids a redundant lookup of the
irq descriptor.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02 14:51:03 -07:00
Adrian Alonso 978fd1d726 pinctrl: freescale: imx7d: support iomux lpsr controller
iMX7D has two iomuxc controllers, iomuxc controller similar as
previous iMX SoC generation and iomuxc-lpsr which provides low
power state rentetion capabilities on gpios that are part of
iomuxc-lpsr

Add iomuxc-lpsr gpio group id's

Signed-off-by: Adrian Alonso <aalonso@freescale.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02 14:43:44 -07:00
Adrian Alonso 26d8cde526 pinctrl: freescale: imx: add shared input select reg support
- Add shared input select register support
- imx7d has two iomux controllers iomuxc and iomuxc-lpsr
  which share select_input register for daisy chain settings

Signed-off-by: Adrian Alonso <aalonso@freescale.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02 14:38:24 -07:00
Adrian Alonso e7b37a522a pinctrl: freescale: imx: allow mux_reg offset zero
Allow mux_reg offset zero to be a valid pin_id, on imx7d
mux_conf reg offset is zero for iomuxc-lspr controller

Signed-off-by: Adrian Alonso <aalonso@freescale.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02 14:37:06 -07:00
Robin Gong ee1635180a pinctrl: freescale: imx: fix system crash if enable two pinctl instances
Fix system chrash caused by groups whose number is smaller than the number
of groups of the last pinctl instance which is not initialized.

iMX7D supports two iomux controllers (iomuxc-lpsr and iomuxc) on probing
the second instance (iomuxc) the chrash below occurs.

Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.2.0-next-20150901-00006-gebfa43c (aalonso@bluefly)
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7)
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasin instruction cache
[    0.000000] Machine model: Freescale i.MX7 SabreSD Board
[    0.661012] [<802a6cb0>] (strcmp) from [<802cc80c>] (imx_dt_node_to_map+0x58/0x208)
[    0.668879] [<802cc80c>] (imx_dt_node_to_map) from [<802cbe24>] (pinctrl_dt_to_map+0x174/0x2b0)
[    0.677654] [<802cbe24>] (pinctrl_dt_to_map) from [<802c8f18>] (pinctrl_get+0x100/0x424)
[    0.685878] [<802c8f18>] (pinctrl_get) from [<802c9510>] (pinctrl_register+0x26c/0x480)
[    0.694104] [<802c9510>] (pinctrl_register) from [<802ccf3c>] (imx_pinctrl_probe+0x580/0x6e8)
[    0.702706] [<802ccf3c>] (imx_pinctrl_probe) from [<80351b58>] (platform_drv_probe+0x44/0xa4)
[    0.711455] [<80351b58>] (platform_drv_probe) from [<803503ec>] (driver_probe_device+0x174/0x2b4)
[    0.720405] [<803503ec>] (driver_probe_device) from [<803505fc>] (__driver_attach+0x8c/0x90)
[    0.728982] [<803505fc>] (__driver_attach) from [<8034e930>] (bus_for_each_dev+0x6c/0xa0)
[    0.737381] [<8034e930>] (bus_for_each_dev) from [<8034fb88>] (bus_add_driver+0x148/0x1f0)
[    0.745804] [<8034fb88>] (bus_add_driver) from [<80350c00>] (driver_register+0x78/0xf8)
[    0.753880] [<80350c00>] (driver_register) from [<800097d0>] (do_one_initcall+0x8c/0x1d4)
[    0.762282] [<800097d0>] (do_one_initcall) from [<80987dac>] (kernel_init_freeable+0x144/0x1e4)
[    0.771061] [<80987dac>] (kernel_init_freeable) from [<806d9c7c>] (kernel_init+0x8/0xe8)
[    0.779285] [<806d9c7c>] (kernel_init) from [<8000f628>] (ret_from_fork+0x14/0x2c)
[    0.786981] Code: e3520000 e5e32001 1afffffb e12fff1e (e4d03001)

Signed-off-by: Robin Gong <b38343@freescale.com>
Signed-off-by: Adrian Alonso <aalonso@freescale.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02 05:18:40 -07:00
Ludovic Desroches de4e882f3f pinctrl: at91-pio4: add PM stuff
Allow GPIOs to be configured as wakeup sources. When going to suspend,
disable all GPIO irqs excepting the one configured as wakeup sources.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02 05:02:37 -07:00
Vishnu Patekar 4730f33f0d pinctrl: sunxi: add allwinner A83T PIO controller support
Allwinner A83T soc port controller has 8 ports.
It has 3 IRQ banks namely PB, PG, PH.
Pinmuxing are different for some pins as compared to
sun8i A23 and A33.

Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02 04:09:44 -07:00
Masahiro Yamada e86c62066e pinctrl: uniphier: add SD card pinmux settings
Add SD card pinmux settings for PH1-LD4, PH1-Pro4, PH1-sLD8,
PH1-Pro5, ProXstream2, and PH1-LD6b SoCs.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02 04:07:15 -07:00
Javier Martinez Canillas be2cbd4dbb pinctrl: samsung: Remove unneded semicolon
It's not needed an is just creating a null statement, so remove it.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02 04:06:48 -07:00
Javier Martinez Canillas e441189975 pinctrl: mediatek: Remove unneded semicolon
It's not needed an is just creating a null statement, so remove it.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Hongzhou Yang <hongzhou.yang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02 04:06:47 -07:00
Javier Martinez Canillas 5c99c0ffa4 pinctrl: sunxi: Remove unneeded semicolon
It's not needed an is just creating a null statement, so remove it.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02 04:06:47 -07:00
Javier Martinez Canillas 14316c4ca9 pinctrl: mxs: Remove unneded semicolon
It's not needed an is just creating a null statement, so remove it.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02 04:06:47 -07:00
Javier Martinez Canillas 1978c5ec0f pinctrl: tz1090-pdc: Remove unneded semicolons
They aren't needed and are just creating null statements so remove it.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02 04:06:46 -07:00
Javier Martinez Canillas 9168888384 pinctrl: tz1090: Remove unneded semicolons
They aren't needed and are just creating null statements so remove it.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02 04:06:46 -07:00
Masahiro Yamada de7f8e3e6b pinctrl: uniphier: fix input enable settings for PH1-sLD8
Currently, input enable settings are missing from the PH1-sLD8
pinctrl driver.  (All the entries in the pin table are set to
UNIPHIER_PIN_IECTRL_NONE).

Fill the table with correct values.

Fixes: 95372f9dc8 ("pinctrl: UniPhier: add UniPhier PH1-sLD8 pinctrl driver")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02 04:06:26 -07:00
Uwe Kleine-König 9911a2d5e9 pinctrl: imx25: ensure that a pin with id i is at position i in the info array
The code in pinctrl-imx.c only works correctly if in the
imx_pinctrl_soc_info passed to imx_pinctrl_probe we have:

	info->pins[i].number = i
	conf_reg(info->pins[i]) = 4 * i

(which conf_reg(pin) being the offset of the pin's configuration
register).

When the imx25 specific part was introduced in b4a87c9b96 ("pinctrl:
pinctrl-imx: add imx25 pinctrl driver") we had:

	info->pins[i].number = i + 1
	conf_reg(info->pins[i]) = 4 * i

. Commit 34027ca2bb ("pinctrl: imx25: fix numbering for pins") tried
to fix that but made the situation:

	info->pins[i-1].number = i
	conf_reg(info->pins[i-1]) = 4 * i

which is hardly better but fixed the error seen back then.

So insert another reserved entry in the array to finally yield:

	info->pins[i].number = i
	conf_reg(info->pins[i]) = 4 * i

Fixes: 34027ca2bb ("pinctrl: imx25: fix numbering for pins")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02 04:06:02 -07:00
Hans de Goede d50a9e1b6d pinctrl: sun5i: Fix a10s pwm1 pinctrl mapping
The comment for PG14 mux setting 3 already correctly states that this
muxes PG13 to pwm1, but the text ascociated with it said uart3, fix this.

Note that we use "pwm" rather then "pwm1" to be consistent with pwm0
where the mux setting is also simply called "pwm" and to be consistent
with sun4i/sun7i which do the same.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02 04:06:01 -07:00
Linus Walleij 12597e4539 Merge branch 'sh-pfc-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel 2015-10-02 02:25:01 -07:00
Takeshi Kihara 819fd4bfcc pinctrl: sh-pfc: r8a7795: add EtherAVB support
This patch adds EthernetAVB

Based on a much lager patch by Takeshi Kihara which was
originally posted by Kuninori Morimoto.

Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
[horms: extracted from a larger patch;
        corrected swapped {MATCH,CAPTURE_A} pins]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-02 09:54:41 +02:00
Kuninori Morimoto 9b132ba3e3 pinctrl: sh-pfc: r8a7795: add Audio SSI pin support
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-02 09:54:41 +02:00
Kuninori Morimoto c33a7fe399 pinctrl: sh-pfc: r8a7795: add Audio clock pin support
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-02 09:54:40 +02:00
Kuninori Morimoto 2544ef7230 pinctrl: sh-pfc: r8a7795: add I2C pin support
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-02 09:54:40 +02:00
Geert Uytterhoeven ff8459a506 pinctrl: sh-pfc: r8a7795: add SCIFx support
This patch adds SCIF0/1/2/3/4/5

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
[Morimoto-san: Updated]
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02 09:54:39 +02:00
Takeshi Kihara 0b0ffc96db pinctrl: sh-pfc: Initial R8A7795 PFC support
Add PFC base support for the R8A7795 SoC.

Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[Morimoto-san: updated]
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-02 09:54:39 +02:00
Kuninori Morimoto 5451d09259 pinctrl: sh-pfc: remove unused PINMUX_IPSR_MODSEL_DATA()
Now, all PINMUX_IPSR_MODSEL_DATA() are replased to PINMUX_IPSR_MSEL()
Let's remove unused PINMUX_IPSR_MODSEL_DATA()

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-02 09:54:38 +02:00
Kuninori Morimoto 759151401c pinctrl: sh-pfc: r8a7779: use PINMUX_IPSR_MSEL()
Now, PINMUX_IPSR_MSEL() and PINMUX_IPSR_MODSEL_DATA() are same.

Current PFC driver is very difficult to read, because macro names are
using different length.

	PINMUX_IPSR_NOGP(ispr, ...)
	PINMUX_IPSR_DATA(ipsr, ...)
	PINMUX_IPSR_NOGM(ispr, ...)
	PINMUX_IPSR_NOFN(ipsr, ...)
	PINMUX_IPSR_MSEL(ipsr, ...)
	PINMUX_IPSR_MODSEL_DATA(ipsr, ...)

It can be readable if we can use PINMUX_IPSR_MSEL() instead
of PINMUX_IPSR_MODSEL_DATA()

	PINMUX_IPSR_NOGP(ispr, ...)
	PINMUX_IPSR_DATA(ipsr, ...)
	PINMUX_IPSR_NOGM(ispr, ...)
	PINMUX_IPSR_NOFN(ipsr, ...)
	PINMUX_IPSR_MSEL(ipsr, ...)

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-02 09:54:38 +02:00
Kuninori Morimoto af5132dd12 pinctrl: sh-pfc: r8a7790: use PINMUX_IPSR_MSEL()
Now, PINMUX_IPSR_MSEL() and PINMUX_IPSR_MODSEL_DATA() are same.

Current PFC driver is very difficult to read, because macro names are
using different length.

	PINMUX_IPSR_NOGP(ispr, ...)
	PINMUX_IPSR_DATA(ipsr, ...)
	PINMUX_IPSR_NOGM(ispr, ...)
	PINMUX_IPSR_NOFN(ipsr, ...)
	PINMUX_IPSR_MSEL(ipsr, ...)
	PINMUX_IPSR_MODSEL_DATA(ipsr, ...)

It can be readable if we can use PINMUX_IPSR_MSEL() instead
of PINMUX_IPSR_MODSEL_DATA()

	PINMUX_IPSR_NOGP(ispr, ...)
	PINMUX_IPSR_DATA(ipsr, ...)
	PINMUX_IPSR_NOGM(ispr, ...)
	PINMUX_IPSR_NOFN(ipsr, ...)
	PINMUX_IPSR_MSEL(ipsr, ...)

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-02 09:54:37 +02:00
Kuninori Morimoto 13ce3c39d0 pinctrl: sh-pfc: r8a7791: use PINMUX_IPSR_MSEL()
Now, PINMUX_IPSR_MSEL() and PINMUX_IPSR_MODSEL_DATA() are same.

Current PFC driver is very difficult to read, because macro names are
using different length.

	PINMUX_IPSR_NOGP(ispr, ...)
	PINMUX_IPSR_DATA(ipsr, ...)
	PINMUX_IPSR_NOGM(ispr, ...)
	PINMUX_IPSR_NOFN(ipsr, ...)
	PINMUX_IPSR_MSEL(ipsr, ...)
	PINMUX_IPSR_MODSEL_DATA(ipsr, ...)

It can be readable if we can use PINMUX_IPSR_MSEL() instead
of PINMUX_IPSR_MODSEL_DATA()

	PINMUX_IPSR_NOGP(ispr, ...)
	PINMUX_IPSR_DATA(ipsr, ...)
	PINMUX_IPSR_NOGM(ispr, ...)
	PINMUX_IPSR_NOFN(ipsr, ...)
	PINMUX_IPSR_MSEL(ipsr, ...)

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-02 09:54:37 +02:00
Kuninori Morimoto adedb87fb6 pinctrl: sh-pfc: r8a7794: use PINMUX_IPSR_MSEL()
Now, PINMUX_IPSR_MSEL() and PINMUX_IPSR_MODSEL_DATA() are same.

Current PFC driver is very difficult to read, because macro names are
using different length.

	PINMUX_IPSR_NOGP(ispr, ...)
	PINMUX_IPSR_DATA(ipsr, ...)
	PINMUX_IPSR_NOGM(ispr, ...)
	PINMUX_IPSR_NOFN(ipsr, ...)
	PINMUX_IPSR_MSEL(ipsr, ...)
	PINMUX_IPSR_MODSEL_DATA(ipsr, ...)

It can be readable if we can use PINMUX_IPSR_MSEL() instead
of PINMUX_IPSR_MODSEL_DATA()

	PINMUX_IPSR_NOGP(ispr, ...)
	PINMUX_IPSR_DATA(ipsr, ...)
	PINMUX_IPSR_NOGM(ispr, ...)
	PINMUX_IPSR_NOFN(ipsr, ...)
	PINMUX_IPSR_MSEL(ipsr, ...)

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-02 09:54:36 +02:00
Kuninori Morimoto 3d8c120be3 pinctrl: sh-pfc: sh7734: use PINMUX_IPSR_MSEL()
Now, PINMUX_IPSR_MSEL() and PINMUX_IPSR_MODSEL_DATA() are same.

Current PFC driver is very difficult to read, because macro names are
using different length.

	PINMUX_IPSR_NOGP(ispr, ...)
	PINMUX_IPSR_DATA(ipsr, ...)
	PINMUX_IPSR_NOGM(ispr, ...)
	PINMUX_IPSR_NOFN(ipsr, ...)
	PINMUX_IPSR_MSEL(ipsr, ...)
	PINMUX_IPSR_MODSEL_DATA(ipsr, ...)

It can be readable if we can use PINMUX_IPSR_MSEL() instead
of PINMUX_IPSR_MODSEL_DATA()

	PINMUX_IPSR_NOGP(ispr, ...)
	PINMUX_IPSR_DATA(ipsr, ...)
	PINMUX_IPSR_NOGM(ispr, ...)
	PINMUX_IPSR_NOFN(ipsr, ...)
	PINMUX_IPSR_MSEL(ipsr, ...)

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-02 09:54:36 +02:00
Kuninori Morimoto 2b67bccb47 pinctrl: sh-pfc: modify PINMUX_IPSR_MSEL() macro order
The difference between PINMUX_IPSR_MSEL() and PINMUX_IPSR_MODSEL_DATA()
are FN_xxx order, and PINMUX_IPSR_MSEL() is used only from r8a7778.
Now it r8a7778 works correctly with PINMUX_IPSR_MODSEL_DATA() order.
This means we can merge PINMUX_IPSR_MSEL() and PINMUX_IPSR_MODSEL_DATA().

Current PFC driver is very difficult to read, because macro names are
using different length. Especially PINMUX_IPSR_MODSEL_DATA() is well
used macro

	PINMUX_IPSR_NOGP(ispr, ...)
	PINMUX_IPSR_DATA(ipsr, ...)
	PINMUX_IPSR_NOGM(ispr, ...)
	PINMUX_IPSR_NOFN(ipsr, ...)
	PINMUX_IPSR_MSEL(ipsr, ...)
	PINMUX_IPSR_MODSEL_DATA(ipsr, ...)

It can be readable if we can merge
PINMUX_IPSR_MSEL() and PINMUX_IPSR_MODSEL_DATA()

	PINMUX_IPSR_NOGP(ispr, ...)
	PINMUX_IPSR_DATA(ipsr, ...)
	PINMUX_IPSR_NOGM(ispr, ...)
	PINMUX_IPSR_NOFN(ipsr, ...)
	PINMUX_IPSR_MSEL(ipsr, ...)

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-02 09:54:35 +02:00
Laurent Pinchart 4adeabd042 pinctrl: sh-pfc: Remove hardcoded IRQ numbers
Now that all ARM-based Renesas SoCs use multiplatform kernels only the
hardcoded IRQ numbers can be dropped as they're dynamically allocated.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-02 09:54:35 +02:00
Geert Uytterhoeven 90d066130f pinctrl: sh-pfc: Get rid of CONFIG_ARCH_SHMOBILE_LEGACY
Shmobile is all multiplatform these days, so get rid of the reference to
CONFIG_ARCH_SHMOBILE_LEGACY.

Move the legacy code to do the non-DT mapping between GPIOs and pins
inside the existing #ifdef CONFIG_SUPERH section.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02 09:54:34 +02:00
Geert Uytterhoeven 9e21461453 pinctrl: sh-pfc: r8a7791/r8a7793: Correct SCIFB1_B SCK MOD_SEL value
When using serial port SCIFB1_B, transmit works, but nothing is
received.

Receive fails because the SCIFB1_SCK_B settings configure the wrong
value for the sel_scifb1 field in the Module Select Register (MOD_SEL),
due to an ambiguity in the R-Car M2-W and M2-N datasheets.

Tested on r8a7791/koelsch using pins 53 (TXD) and 72 (RXD) on EXIO
Connector A.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02 09:54:34 +02:00
Geert Uytterhoeven 48a7b99d75 pinctrl: sh-pfc: r8a7794: Remove bogus SCIF0 SCK pin data
SCIF0 on R-Car E2 does not have an SCK pin.

"SCIF_CLK" is the (H)SCIF baud rate generation clock pin, which is not
yet supported.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02 09:54:33 +02:00
Geert Uytterhoeven 56f891b46d pinctrl: sh-pfc: Confine legacy function GPIOs to SH
Legacy function GPIOs are no longer used on ARM since commit
a27c5cd1a0 ("sh-pfc: sh73a0: Remove function GPIOs").
Extract its setup code into a separate function, and make all function
GPIO related code and data depend on CONFIG_SUPERH.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2015-10-02 09:54:33 +02:00
Geert Uytterhoeven 57106e5ca5 pinctrl: sh-pfc: Remove empty gpio_function_free()
gpio_chip.free() is optional, and can just be left unimplemented.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02 09:54:32 +02:00
Geert Uytterhoeven 18fab3995e pinctrl: sh-pfc: Stop calling gpiochip_add_pin_range() on DT platforms
On platforms where the PFC/GPIO controller is instantiated from DT, the
mapping between GPIOs and pins is set up using the "gpio-ranges"
property in DT.

Hence stop setting up the mapping from C code on DT platforms.
This code is still used for SH or ARM-legacy platforms.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2015-10-02 09:53:16 +02:00
Javier Martinez Canillas b4b05b9af3 pinctrl: mediatek: Consistently use the BIT() macro
The mediatek pinctrl driver uses the BIT() macro instead of open
coding 1 << n in all but one place. Replace this occurrence with
the BIT() macro for consistency.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-25 09:40:57 -07:00
Xing Zheng c5ce767088 pinctrl: rockchip: add support for the rk3036
Many parts of pinctrl rk3036 are similar to rk2928's.

Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-25 09:22:55 -07:00
Ludovic Desroches 776180848b pinctrl: introduce driver for Atmel PIO4 controller
Add a pinctrl/gpio driver for Atmel PIO4 controller available on SAMA5D2
chip family.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-21 11:21:33 -07:00
Linus Torvalds fadb97b089 Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
 "This is a rather large update post rc1 due to the final steps of
  cleanups and API changes which had to wait for the preparatory patches
  to hit your tree.

   - Regression fixes for ARM GIC irqchips

   - Regression fixes and lockdep anotations for renesas irq chips

   - The leftovers of the cleanup and preparatory patches which have
     been ignored by maintainers

   - Final conversions of the newly merged users of obsolete APIs

   - Final removal of obsolete APIs

   - Final removal of ARM artifacts which had been introduced during the
     conversion of ARM to the generic interrupt code.

   - Final split of the irq_data into chip specific and common data to
     reflect the needs of hierarchical irq domains.

   - Treewide removal of the first argument of interrupt flow handlers,
     i.e. the irq number, which is not used by the majority of handlers
     and simple to retrieve from the other argument the irq descriptor.

   - A few comment updates and build warning fixes"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
  arm64: Remove ununsed set_irq_flags
  ARM: Remove ununsed set_irq_flags
  sh: Kill off set_irq_flags usage
  irqchip: Kill off set_irq_flags usage
  gpu/drm: Kill off set_irq_flags usage
  genirq: Remove irq argument from irq flow handlers
  genirq: Move field 'msi_desc' from irq_data into irq_common_data
  genirq: Move field 'affinity' from irq_data into irq_common_data
  genirq: Move field 'handler_data' from irq_data into irq_common_data
  genirq: Move field 'node' from irq_data into irq_common_data
  irqchip/gic-v3: Use IRQD_FORWARDED_TO_VCPU flag
  irqchip/gic: Use IRQD_FORWARDED_TO_VCPU flag
  genirq: Provide IRQD_FORWARDED_TO_VCPU status flag
  genirq: Simplify irq_data_to_desc()
  genirq: Remove __irq_set_handler_locked()
  pinctrl/pistachio: Use irq_set_handler_locked
  gpio: vf610: Use irq_set_handler_locked
  powerpc/mpc8xx: Use irq_set_handler_locked()
  powerpc/ipic: Use irq_set_handler_locked()
  powerpc/cpm2: Use irq_set_handler_locked()
  ...
2015-09-18 08:11:42 -07:00
Thomas Gleixner bd0b9ac405 genirq: Remove irq argument from irq flow handlers
Most interrupt flow handlers do not use the irq argument. Those few
which use it can retrieve the irq number from the irq descriptor.

Remove the argument.

Search and replace was done with coccinelle and some extra helper
scripts around it. Thanks to Julia for her help!

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-09-16 15:47:51 +02:00
Thomas Gleixner 7c51173add pinctrl/pistachio: Use irq_set_handler_locked
Use irq_set_handler_locked() as it avoids a redundant lookup of the
irq descriptor. Search and replacement was done with coccinelle:

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-09-16 15:43:11 +02:00
Thomas Gleixner b9a5ec33e3 pinctrl: sunxi: Use irq_set_chip_handler_name_locked()
__irq_set_chip_handler_name_locked() is about to be replaced. Use
irq_set_chip_handler_name_locked() instead.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-09-16 12:42:49 +02:00
Linus Walleij fa84b52cb6 pinctrl: samsung: s3c24xx: fix syntax error
?SYNTAX ERROR

irq_desc_get_irq_chip() does not exist. It should
be irq_desc_get_chip(). Tested by compiling
s3c2410_defconfig.

Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-14 09:13:43 +02:00
Tony Lindgren 942cde7240 pinctrl: core: Warn about NULL gpio_chip in pinctrl_ready_for_gpio_range()
If the gpio driver is confused about the numbers for gpio-ranges,
pinctrl_ready_for_gpio_range() may get called with invalid GPIO
causing a NULL pointer exception. Let's instead provide a warning
that allows fixing the problem and return with error.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-14 09:13:43 +02:00
Masahiro Yamada 163dc9f39a pinctrl: join lines that can be a single line within 80 columns
There is no reason to break a line shorter than 80 columns.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-14 09:13:43 +02:00
Julia Lawall 5a99233e9b pinctrl: digicolor: convert null test to IS_ERR test
Since commit 323de9efdf ("pinctrl: make pinctrl_register() return proper
error code"), pinctrl_register returns an error code rather than NULL on
failure.  Update a driver that was introduced more recently.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e,e1,e2;
@@

e = pinctrl_register(...)
... when != e = e1
if (
-   e == NULL
+   IS_ERR(e)
   ) {
     ...
     return
-      e2
+      PTR_ERR(e)
     ;
     }
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-14 09:13:43 +02:00
Julia Lawall d259ec26a6 pinctrl: qcom: ssbi: convert null test to IS_ERR test
Since commit 323de9efdf ("pinctrl: make pinctrl_register() return proper
error code"), pinctrl_register returns an error code rather than NULL on
failure.  Update some drivers that were introduced more recently.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e,e1,e2;
@@

e = pinctrl_register(...)
... when != e = e1
if (
-   e == NULL
+   IS_ERR(e)
   ) {
     ...
     return
-      e2
+      PTR_ERR(e)
     ;
     }
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-14 09:13:43 +02:00
Linus Torvalds 88a99886c2 This is the bulk of pin control changes for the v4.3 development
cycle
 
 Core changes:
 
 - It is possible configure groups in debugfs.
 
 - Consolidation of chained IRQ handler install/remove replacing
   all call sites where irq_set_handler_data() and
   irq_set_chained_handler() were done in succession with a
   combined call to irq_set_chained_handler_and_data(). This
   series was created by Thomas Gleixner after the problem was
   observed by Russell King.
 
 - Tglx also made another series of patches switching
   __irq_set_handler_locked() for irq_set_handler_locked() which
   is way cleaner.
 
 - Tglx also wrote a good bunch of patches to make use of
   irq_desc_get_xxx() accessors and avoid looking up irq_descs
   from IRQ numbers. The goal is to get rid of the irq number
   from the handlers in the IRQ flow which is nice.
 
 Driver feature enhancements:
 
 - Power management support for the SiRF SoC Atlas 7.
 
 - Power down support for the Qualcomm driver.
 
 - Intel Cherryview and Baytrail: switch drivers to use raw
   spinlocks in IRQ handlers to play nice with the realtime
   patch set.
 
 - Rework and new modes handling for Qualcomm SPMI-MPP.
 
 - Pinconf power source config for SH PFC.
 
 New drivers and subdrivers:
 
 - A new driver for Conexant Digicolor CX92755.
 
 - A new driver for UniPhier PH1-LD4, PH1-Pro4, PH1-sLD8,
   PH1-Pro5, ProXtream2 and PH1-LD6b SoC pin control support.
 
 - Reverse-egineered the S/PDIF settings for the Allwinner
   sun4i driver.
 
 - Support for Qualcomm Technologies QDF2xxx ARM64 SoCs
 
 - A new Freescale i.mx6ul subdriver.
 
 Cleanup:
 
 - Remove platform data support in a number of SH PFC
   subdrivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJV6YzgAAoJEEEQszewGV1zbIAQAILzMrzWkxsy7bhvL4QdP5/K
 OG3EodE//AE0G5gKugUDjg5t2lftdiIJVhjDA17ruETCSciuAxZSLThlMy1sQgyN
 LPxy9LlCrmsqrYt9+fmJ9js8j52RBJikKK0RUyUVz0VojTBplRpElyEx/KxwM5sG
 Hy3+hU61uKO0j9AyIcsa/RKP6SGavwZdHytJBsHNw+pODyE3UZCf52ChAVBsTPfE
 MV70g3Qzfqur7ZFqcNgtUV7qCyYvlF12ooiihrGFDOsTL3sSq4/OXB7z1z1mGGHL
 Dgq8pXJ6EIZlCbk+jFMTzPRSzy46dxNai0eErjTUVEldH1tOphzGMvKmOdm/nczH
 4M/UOWOKBE1aOYZNPtnUgDy2MRt5K9VJStCNSHEQCB2lGdojNAtmj2cmr8flBN5m
 gM9FDpIS1/C+OYYTkOY9ftPsH5zOk7sCLEHSH5USYRGJHihzLnkV90eiN6a7vlF1
 hyTGrIyl6e//E5JBgamjnR3+fYuxQGr6WeAZEP/gXZRm7BCKCaPwCarq+kPZVG4A
 nolZ/QQN6XYPSlveSPU97VYvLYEUvXaKN0Hf2DTbwkqvNFp7JORD65QLESPtQoIp
 x95iHMdB/1+0OfgOqMmlOtKpOKREeQ/R+KWACxsrr5Rfv3/7CP4BMRGypIZ/iPmz
 HWoyDI4lIebBR+JnjMjK
 =4QFX
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v4.3 development
  cycle.

  Like with GPIO it's a lot of stuff.  If my subsystems are any sign of
  the overall tempo of the kernel v4.3 will be a gigantic diff.

[ It looks like 4.3 is calmer than 4.2 in most other subsystems, but
  we'll see - Linus ]

  Core changes:

   - It is possible configure groups in debugfs.

   - Consolidation of chained IRQ handler install/remove replacing all
     call sites where irq_set_handler_data() and
     irq_set_chained_handler() were done in succession with a combined
     call to irq_set_chained_handler_and_data().  This series was
     created by Thomas Gleixner after the problem was observed by
     Russell King.

   - Tglx also made another series of patches switching
     __irq_set_handler_locked() for irq_set_handler_locked() which is
     way cleaner.

   - Tglx also wrote a good bunch of patches to make use of
     irq_desc_get_xxx() accessors and avoid looking up irq_descs from
     IRQ numbers.  The goal is to get rid of the irq number from the
     handlers in the IRQ flow which is nice.

  Driver feature enhancements:

   - Power management support for the SiRF SoC Atlas 7.

   - Power down support for the Qualcomm driver.

   - Intel Cherryview and Baytrail: switch drivers to use raw spinlocks
     in IRQ handlers to play nice with the realtime patch set.

   - Rework and new modes handling for Qualcomm SPMI-MPP.

   - Pinconf power source config for SH PFC.

  New drivers and subdrivers:

   - A new driver for Conexant Digicolor CX92755.

   - A new driver for UniPhier PH1-LD4, PH1-Pro4, PH1-sLD8, PH1-Pro5,
     ProXtream2 and PH1-LD6b SoC pin control support.

   - Reverse-egineered the S/PDIF settings for the Allwinner sun4i
     driver.

   - Support for Qualcomm Technologies QDF2xxx ARM64 SoCs

   - A new Freescale i.mx6ul subdriver.

  Cleanup:

   - Remove platform data support in a number of SH PFC subdrivers"

* tag 'pinctrl-v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (95 commits)
  pinctrl: at91: fix null pointer dereference
  pinctrl: mediatek: Implement wake handler and suspend resume
  pinctrl: mediatek: Fix multiple registration issue.
  pinctrl: sh-pfc: r8a7794: add USB pin groups
  pinctrl: at91: Use generic irq_{request,release}_resources()
  pinctrl: cherryview: Use raw_spinlock for locking
  pinctrl: baytrail: Use raw_spinlock for locking
  pinctrl: imx6ul: Remove .owner field
  pinctrl: zynq: Fix typos in smc0_nand_grp and smc0_nor_grp
  pinctrl: sh-pfc: Implement pinconf power-source param for voltage switching
  clk: rockchip: add pclk_pd_pmu to the list of rk3288 critical clocks
  pinctrl: sun4i: add spdif to pin description.
  pinctrl: atlas7: clear ugly branch statements for pull and drivestrength
  pinctrl: baytrail: Serialize all register access
  pinctrl: baytrail: Drop FSF mailing address
  pinctrl: rockchip: only enable gpio clock when it setting
  pinctrl/mediatek: fix spelling mistake in dev_err error message
  pinctrl: cherryview: Serialize all register access
  pinctrl: UniPhier: PH1-Pro5: add I2C ch6 pin-mux setting
  pinctrl: nomadik: reflect current input value
  ...
2015-09-04 10:22:09 -07:00
Linus Torvalds b3a5af435a ARM: DT updates for v4.3
This is the usual large batch of DT updates. Lots and lots of smaller
 changes, some of the larger ones to point out are:
 
 - Rockchip veyron (Chromebook) support, as well as several other new boards
 - DRM support on Atmel AT91SAM9N12EK
 - USB additions on some Allwinner platforms
 - Mediatek MT6580 support
 - Freescale i.MX6UL support
 - Cleanups for Renesas shmobile platforms
 - Lots of added devices on LPC18xx
 - Lots of added devices and boards on UniPhier
 
 There's also some dependent code added here, in particular some branches
 that are primarily merged through the clock tree.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJV5OMWAAoJEIwa5zzehBx3r2QP/1skn0zzgfvbK0kkPOh9q3Jk
 jX1elN4Wde1SnScz8UbdVb9nmdbhxsuYE/3+Lz7yCndWScBiak4qcsNHrSRhh3FA
 ST7Ub8DLc2TxY9K7eDkyVCcNkP35+UQTHCN76R5Lgrlfw3UO9Zr3xPFX3+Kd6aWz
 9X8UnvJacQQIN/vO6J02kB96sKPEIANfuMgO6vDSbmcZ1RrdlHzjoRwAV0smECtJ
 NyOh+NQdPBR0gSl/peyKzAXoDHNXpDotltTmIz3tPA+dYBO/qG//B73H/oqox0ql
 AKAktyaDzdxXEuixPtAroo4dDy3xuIQ6xU+DNhPWQq0BgaxHWqkwq60d74ot8vCz
 8gvC8pwA6gavbqVFNePOnwPNSyWZX01scX4fp903NjVM8/rGPvCR4y6p8lFIyVkG
 P0L8rmY/UYq3fieaAb1W0odASDrQpgg3zsHD7to43hz6jaRnMRCpA8nTVqJcyHqI
 E6YfGQH87Kpbvkjo0FYqo5P6xCCRTq+QUys6JruNYg05R/gd8AG7cXaVNO3yvg3T
 lRwNXDBt/zcp2exKnGR0IdGMUMICzsuoB8ZePkQdIWwePrd4AzT5qYJe/txmg1rd
 q+9VJqQkeF+txLd9XUV2W/Hcuzu3ZPCbs97I9tTKQHMGwKUZaPfuk2r4+4K+Ps5a
 dYwdms39p6AIT43rK+m3
 =D2Pm
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM DT updates from Olof Johansson:
 "Ladies and gentlemen, we proudly announce to you the latest branch of
  ARM device tree contents for the mainline kernel.  Come and see, come
  and see!

  No less than twentythree thousand lines of additions! Just imagine the
  joy you will have of using your mainline kernel on newly supported
  hardware such as Rockchip Chromebooks, Freescale i.MX6UL boards or
  UniPhier hardware!

  For those of you feeling less adventurous, added hardware support on
  platforms such as TI DM814x and Gumstix Overo platforms might be more
  of your liking.

  We've got something for everyone here!

  Ahem.  Cough.  So, anyway...

  This is the usual large batch of DT updates.  Lots and lots of smaller
  changes, some of the larger ones to point out are:

   - Rockchip veyron (Chromebook) support, as well as several other new boards
   - DRM support on Atmel AT91SAM9N12EK
   - USB additions on some Allwinner platforms
   - Mediatek MT6580 support
   - Freescale i.MX6UL support
   - cleanups for Renesas shmobile platforms
   - lots of added devices on LPC18xx
   - lots of added devices and boards on UniPhier

  There's also some dependent code added here, in particular some
  branches that are primarily merged through the clock tree"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (389 commits)
  ARM: tegra: Add gpio-ranges property
  ARM: tegra: Fix AHB base address on Tegra20, Tegra30 and Tegra114
  ARM: tegra: Add Tegra124 PMU support
  ARM: tegra: jetson-tk1: Add GK20A GPU DT node
  ARM: tegra: venice2: Add GK20A GPU DT node
  ARM: tegra: Add IOMMU node to GK20A
  ARM: tegra: Add CPU regulator to the Jetson TK1 device tree
  ARM: tegra: Add entries for cpufreq on Tegra124
  ARM: tegra: Enable the DFLL on the Jetson TK1
  ARM: tegra: Add the DFLL to Tegra124 device tree
  ARM: dts: zynq: Add devicetree entry for Xilinx Zynq reset controller.
  ARM: dts: UniPhier: fix PPI interrupt CPU mask of timer nodes
  ARM: dts: rockchip: correct regulator power states for suspend
  ARM: dts: rockchip: correct regulator PM properties
  ARM: dts: vexpress: Use assigned-clock-parents for sp810
  pinctrl: tegra: Only set the gpio range if needed
  arm: boot: dts: am4372: add ARM timers and SCU nodes
  ARM: dts: AM4372: Add the am4372-rtc compatible string
  ARM: shmobile: r8a7794 dtsi: Add CPG/MSTP Clock Domain
  ARM: shmobile: r8a7793 dtsi: Add CPG/MSTP Clock Domain
  ...
2015-09-01 13:09:20 -07:00
David Dueck 1ab36387ea pinctrl: at91: fix null pointer dereference
Not all gpio banks are necessarily enabled, in the current code this can
lead to null pointer dereferences.

[   51.130000] Unable to handle kernel NULL pointer dereference at virtual address 00000058
[   51.130000] pgd = dee04000
[   51.130000] [00000058] *pgd=3f66d831, *pte=00000000, *ppte=00000000
[   51.140000] Internal error: Oops: 17 [#1] ARM
[   51.140000] Modules linked in:
[   51.140000] CPU: 0 PID: 1664 Comm: cat Not tainted 4.1.1+ #6
[   51.140000] Hardware name: Atmel SAMA5
[   51.140000] task: df6dd880 ti: dec60000 task.ti: dec60000
[   51.140000] PC is at at91_pinconf_get+0xb4/0x200
[   51.140000] LR is at at91_pinconf_get+0xb4/0x200
[   51.140000] pc : [<c01e71a0>]    lr : [<c01e71a0>]    psr: 600f0013
sp : dec61e48  ip : 600f0013  fp : df522538
[   51.140000] r10: df52250c  r9 : 00000058  r8 : 00000068
[   51.140000] r7 : 00000000  r6 : df53c910  r5 : 00000000  r4 : dec61e7c
[   51.140000] r3 : 00000000  r2 : c06746d4  r1 : 00000000  r0 : 00000003
[   51.140000] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
[   51.140000] Control: 10c53c7d  Table: 3ee04059  DAC: 00000015
[   51.140000] Process cat (pid: 1664, stack limit = 0xdec60208)
[   51.140000] Stack: (0xdec61e48 to 0xdec62000)
[   51.140000] 1e40:                   00000358 00000000 df522500 ded15f80 c05a9d08 ded15f80
[   51.140000] 1e60: 0000048c 00000061 df522500 ded15f80 c05a9d08 c01e7304 ded15f80 00000000
[   51.140000] 1e80: c01e6008 00000060 0000048c c01e6034 c01e5f6c ded15f80 dec61ec0 00000000
[   51.140000] 1ea0: 00020000 ded6f280 dec61f80 00000001 00000001 c00ae0b8 b6e80000 ded15fb0
[   51.140000] 1ec0: 00000000 00000000 df4bc974 00000055 00000800 ded6f280 b6e80000 ded6f280
[   51.140000] 1ee0: ded6f280 00020000 b6e80000 00000000 00020000 c0090dec c0671e1c dec61fb0
[   51.140000] 1f00: b6f8b510 00000001 00004201 c000924c 00000000 00000003 00000003 00000000
[   51.140000] 1f20: df4bc940 00022000 00000022 c066e188 b6e7f000 c00836f4 000b6e7f ded6f280
[   51.140000] 1f40: ded6f280 b6e80000 dec61f80 ded6f280 00020000 c0091508 00000000 00000003
[   51.140000] 1f60: 00022000 00000000 00000000 ded6f280 ded6f280 00020000 b6e80000 c0091d9c
[   51.140000] 1f80: 00000000 00000000 ffffffff 00020000 00020000 b6e80000 00000003 c000f124
[   51.140000] 1fa0: dec60000 c000efa0 00020000 00020000 00000003 b6e80000 00020000 000271c4
[   51.140000] 1fc0: 00020000 00020000 b6e80000 00000003 7fffe000 00000000 00000000 00020000
[   51.140000] 1fe0: 00000000 bef50b64 00013835 b6f29c76 400f0030 00000003 00000000 00000000
[   51.140000] [<c01e71a0>] (at91_pinconf_get) from [<c01e7304>] (at91_pinconf_dbg_show+0x18/0x2c0)
[   51.140000] [<c01e7304>] (at91_pinconf_dbg_show) from [<c01e6034>] (pinconf_pins_show+0xc8/0xf8)
[   51.140000] [<c01e6034>] (pinconf_pins_show) from [<c00ae0b8>] (seq_read+0x1a0/0x464)
[   51.140000] [<c00ae0b8>] (seq_read) from [<c0090dec>] (__vfs_read+0x20/0xd0)
[   51.140000] [<c0090dec>] (__vfs_read) from [<c0091508>] (vfs_read+0x7c/0x108)
[   51.140000] [<c0091508>] (vfs_read) from [<c0091d9c>] (SyS_read+0x40/0x94)
[   51.140000] [<c0091d9c>] (SyS_read) from [<c000efa0>] (ret_fast_syscall+0x0/0x3c)
[   51.140000] Code: eb010ec2 e30a0d08 e34c005a eb0ae5a7 (e5993000)
[   51.150000] ---[ end trace fb3c370da3ea4794 ]---

Fixes: a0b957f306 ("pinctrl: at91: allow to have disabled gpio bank")
Cc: stable@vger.kernel.org # 3.18
Signed-off-by: David Dueck <davidcdueck@googlemail.com>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-30 21:58:53 +02:00
Maoguang Meng 58a5e1b64b pinctrl: mediatek: Implement wake handler and suspend resume
This patch implement irq_set_wake to get who is wakeup source and
setup on suspend resume.

Signed-off-by: Maoguang Meng <maoguang.meng@mediatek.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
Acked-by: Hongzhou Yang <hongzhou.yang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-26 14:39:43 +02:00
Hongzhou Yang d48c2c0264 pinctrl: mediatek: Fix multiple registration issue.
Since our common driver need support main chip and PMU
at the same time, that means it will register two
pinctrl device, and the pinctrl_desc structure should
be used two times.

But pinctrl_desc use global static definition, then
the latest registered pinctrl device will overwrite
the old one's, all members in pinctrl_desc will set to
the new one's, such as name, pins and pins numbers, etc.
This is a bug.

Move pinctrl_desc into mtk_pinctrl, assign new value for
each pinctrl device to fix it.

Cc: stable@vger.kernel.org # v4.1+
Signed-off-by: Hongzhou Yang <hongzhou.yang@mediatek.com>
Reviewed-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-26 14:37:44 +02:00
Shinobu Uehara 580a7ee933 pinctrl: sh-pfc: r8a7794: add USB pin groups
Add USB0/1 pin groups to R8A7794 PFC driver.

Signed-off-by: Shinobu Uehara <shinobu.uehara.xc@renesas.com>
[Sergei: rebased, renamed, added changelog.]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-26 13:40:25 +02:00
Geert Uytterhoeven 91d33cfedf pinctrl: at91: Use generic irq_{request,release}_resources()
The at91-specific irq_{request,release}_resources() callbacks are
identical to the generic ones, modulo the bug fix in 5b76e79c77
("gpiolib: irqchip: prevent driver unloading if gpio is used as irq
only").

Until commit 8b67a1f0ad ("gpio: don't override irq_*_resources()
callbacks"), the buggy at91-specific callbacks were never used, though.

Hence drop the at91-specific ones in favor of the generic ones.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-26 09:32:20 +02:00
Mika Westerberg 109fdf1572 pinctrl: cherryview: Use raw_spinlock for locking
When running -rt kernel and an interrupt happens on a GPIO line controlled by
Intel Cherryview/Braswell pinctrl driver we get:

 BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:917
 in_atomic(): 1, irqs_disabled(): 1, pid: 0, name: swapper/0
 Preemption disabled at:[<ffffffff81092e9f>] cpu_startup_entry+0x17f/0x480

 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.1.5-rt5 #16
  ...
 Call Trace:
  <IRQ>  [<ffffffff816283c6>] dump_stack+0x4a/0x61
  [<ffffffff81077e17>] ___might_sleep+0xe7/0x170
  [<ffffffff8162d6cf>] rt_spin_lock+0x1f/0x50
  [<ffffffff812e52ed>] chv_gpio_irq_ack+0x3d/0xa0
  [<ffffffff810a72f5>] handle_edge_irq+0x75/0x180
  [<ffffffff810a3457>] generic_handle_irq+0x27/0x40
  [<ffffffff812e57de>] chv_gpio_irq_handler+0x7e/0x110
  [<ffffffff810050aa>] handle_irq+0xaa/0x190
  ...

This is because desc->lock is raw_spinlock and is held when chv_gpio_irq_ack()
is called by the genirq core. chv_gpio_irq_ack() in turn takes pctrl->lock
which in -rt is an rt-mutex causing might_sleep() rightfully to complain about
sleeping function called from invalid context.

In order to keep -rt happy but at the same time make sure that register
accesses get serialized, convert the driver to use raw_spinlock instead.

Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-26 09:27:39 +02:00
Mika Westerberg 78e1c89693 pinctrl: baytrail: Use raw_spinlock for locking
The Intel Baytrail pinctrl driver implements irqchip callbacks which are
called with desc->lock raw_spinlock held. In mainline this is fine because
spinlock resolves to raw_spinlock. However, running the same code in -rt we
get:

 BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:917
 in_atomic(): 1, irqs_disabled(): 1, pid: 0, name: swapper/0
 Preemption disabled at:[<ffffffff81092e9f>] cpu_startup_entry+0x17f/0x480

 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.1.5-rt5 #13
  ...
 Call Trace:
  <IRQ>  [<ffffffff816283c6>] dump_stack+0x4a/0x61
  [<ffffffff81077e17>] ___might_sleep+0xe7/0x170
  [<ffffffff8162d6cf>] rt_spin_lock+0x1f/0x50
  [<ffffffff812e3b88>] byt_gpio_clear_triggering+0x38/0x60
  [<ffffffff812e3bc1>] byt_irq_mask+0x11/0x20
  [<ffffffff810a7013>] handle_level_irq+0x83/0x150
  [<ffffffff810a3457>] generic_handle_irq+0x27/0x40
  [<ffffffff812e3a5f>] byt_gpio_irq_handler+0x7f/0xc0
  [<ffffffff810050aa>] handle_irq+0xaa/0x190
  ...

This is because in -rt spinlocks are preemptible so taking the driver
private spinlock in irqchip callbacks causes might_sleep() to trigger.

In order to keep -rt happy but at the same time make sure that register
accesses get serialized, convert the driver to use raw_spinlock instead.

Also shorten the critical section a bit in few places.

Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-26 09:25:33 +02:00
Fabio Estevam 00133ffbf1 pinctrl: imx6ul: Remove .owner field
platform_driver does not need to set an owner as it will be
populated by the driver core.

The semantic patch that makes this change is available
in scripts/coccinelle/api/platform_no_drv_owner.cocci.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-25 16:29:06 +02:00
Mike Looijmans 2fe2918fa3 pinctrl: zynq: Fix typos in smc0_nand_grp and smc0_nor_grp
Group names should be smc0_nand_grp and smc0_nor_grp, otherwise you'll
get errors like this if you try to pinmux them via the devicetree:
zynq-pinctrl 700.pinctrl: invalid group "smc0_nand_grp" for function "smc0_nand"

Probably a typo while creating these tables.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Acked-by: Moritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-25 16:21:31 +02:00
Ben Hutchings 5b9eaa5659 pinctrl: sh-pfc: Implement pinconf power-source param for voltage switching
The pfc in the R8A7790 (and probably others in the R-Car gen 2 family)
supports switching SDHI signals between 3.3V and 1.8V nominal voltage,
and the SD driver should do that when switching to and from UHS modes.

Add a flag for pins that have configurable I/O voltage and SoC
operations to get and set the nominal voltage.  Implement the pinconf
power-source parameter using these operations.

Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-24 10:44:54 +02:00
Tomeu Vizoso 9462510ce3 pinctrl: tegra: Only set the gpio range if needed
If the gpio DT node has the gpio-ranges property, the range will be
added by the gpio core and doesn't need to be added by the pinctrl
driver.

By having the gpio-ranges property, we have an explicit dependency from
the gpio node to the pinctrl node and we can stop using the deprecated
pinctrl_add_gpio_range() function.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-08-13 16:24:33 +02:00
Marcus Cooper 8152d8cc59 pinctrl: sun4i: add spdif to pin description.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-13 16:03:21 +02:00
Wei Chen 627b1516a3 pinctrl: atlas7: clear ugly branch statements for pull and drivestrength
To set/get atlas7 pull & drive strength, we use lots of if/else
to check pad type. But except mask value or immediate value, all
actions in these conditional branches are the same.
So we use predefined pull info table and drive strength table
to reduce these redundancy code.

Signed-off-by: Wei Chen <Wei.Chen@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-13 14:37:21 +02:00
Mika Westerberg 39ce8150a0 pinctrl: baytrail: Serialize all register access
There is a hardware issue in Intel Baytrail where concurrent GPIO register
access might result reads of 0xffffffff and writes might get dropped
completely.

Prevent this from happening by taking the serializing lock in all places
where it is possible that more than one thread might be accessing the
hardware concurrently.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-13 14:26:14 +02:00
Mika Westerberg 5ab49db8e0 pinctrl: baytrail: Drop FSF mailing address
The FSF address is already mentioned in the COPYING file. No need to
duplicate that information to individual files.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-13 14:25:29 +02:00
Lin Huang 07a06ae99e pinctrl: rockchip: only enable gpio clock when it setting
gpio can keep state even the clock disable, for save power
consumption, only enable gpio clock when it setting

Signed-off-by: Lin Huang <hl@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-13 14:23:26 +02:00
Colin Ian King c70336cc4c pinctrl/mediatek: fix spelling mistake in dev_err error message
Trivial change, fix spelling mistake 'invaild' -> 'invalid' in
dev_err message.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Hongzhou Yang <hongzhou.yang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-13 14:17:36 +02:00
Mika Westerberg 4585b000ac pinctrl: cherryview: Serialize all register access
There is a hardware issue in Intel Braswell/Cherryview where concurrent
GPIO register access might results reads of 0xffffffff and writes might get
dropped.

Prevent this from happening by taking the serializing lock for all places
where it is possible that more than one thread might be accessing the
hardware concurrently.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-13 13:20:02 +02:00
Masahiro Yamada 39b87ad166 pinctrl: UniPhier: PH1-Pro5: add I2C ch6 pin-mux setting
The initial version of this driver missed to add I2C ch6 pin-muxing.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-13 13:15:05 +02:00
Linus Walleij d7f005e839 pinctrl: nomadik: reflect current input value
Let us see the current value on the input line in debugfs.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-11 17:12:57 +02:00
Masahiro Yamada ca67f10f27 pinctrl: join dev_dbg strings into a single line
These are user-visible strings, so can exceed 80 columns.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-03 10:13:00 +02:00
Wei Chen 48356aa79c pinctrl: sirf: add power management support for atlas7
We had not implemented the pm interface of atlas7 pinctrl
and gpio drivers. So when system resumes from sleep, all
pin configuration and gpio status will be lost.

Now, we implement these interfaces to support pm.

At the same time, this patch also drops a lot of if-else
by look-up table for getting and setting pull.

Signed-off-by: Wei Chen <Wei.Chen@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-28 14:09:59 +02:00
Linus Walleij 1051fade4b pinctrl: nomadik: split stn8815 UART0 pin groups
Split the UART pin groups so we can activate RX/TX, CTS/RTS and
the modem pins (DCD, DSR, RI, DTR) as three different groups
with function u0.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-28 13:55:51 +02:00
Rob Herring 9458120ea1 pinctrl: kill off set_irq_flags usage
set_irq_flags is ARM specific with custom flags which have genirq
equivalents. Convert drivers to use the genirq interfaces directly, so we
can kill off set_irq_flags. The translation of flags is as follows:

IRQF_VALID -> !IRQ_NOREQUEST
IRQF_PROBE -> !IRQ_NOPROBE
IRQF_NOAUTOEN -> IRQ_NOAUTOEN

For IRQs managed by an irqdomain, the irqdomain core code handles clearing
and setting IRQ_NOREQUEST already, so there is no need to do this in
.map() functions and we can simply remove the set_irq_flags calls. Some
users also modify IRQ_NOPROBE and this has been maintained although it
is not clear that is really needed. There appears to be a great deal of
blind copy and paste of this code.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Lee Jones <lee@kernel.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Thomas Abraham <thomas.abraham@linaro.org>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: linux-gpio@vger.kernel.org
Cc: linux-rpi-kernel@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-28 12:15:19 +02:00
Linus Walleij 802bb9b67d pinctrl: nomadik: depromote GPIO to subsystem_init()
We no longer have to do GPIO initialization before the
pinctrl initialization, instead we can initialize the pinctrl
portions of the driver first and then the GPIO. Thus we can
move GPIO initialization to a subsystem_initcall(), but
not yet to a device_initcall().

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-27 15:12:29 +02:00
Linus Walleij ee04139d91 pinctrl/ARM: move GPIO and pinctrl deps to device tree
This gets the GPIO ranges out of the driver and into the device
tree where they belong. Standard DT bindings already exist for
this. Since no systems with this are deployed we can just augment
all device trees and the drivers at the same time and simplify
the world.

This also defines the array of GPIO chips related to the pin
controller.

Cc: arm@kernel.org
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-27 15:04:40 +02:00
Maxime Ripard d8323c6b03 pinctrl: sunxi: Add custom irq_domain_ops
The current interrupt parsing code was working by accident, because the
default was actually parsing the first node of interrupts.

While that was mostly working (and the flags were actually ignored), this
binding has never been documented, and doesn't work with SoCs that have
multiple interrupt banks anyway.

Add a proper interrupt xlate function, that uses the same description than
the GPIOs (<bank> <pin> <flags>), that will make things less confusing.

The EINT number will still be used as the hwirq number, but won't be
exposed through the DT.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-27 14:56:30 +02:00
Masahiro Yamada e324957096 pinctrl: use dev_err() to show message in pinmux_func_name_to_selector()
Use dev_err() rather than pr_err() to display the error message.

pinctrl_dev_get_name(pctldev) is no longer necessary because
dev_err() shows which device the message is related to.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-27 14:44:33 +02:00
Masahiro Yamada 2b38ca6d1a pinctrl: use dev_err() to show message in pinctrl_register_one_pin()
Use dev_err() rather than pr_err() to display the error message.
(Besides, dev_err() is already used 7 lines below in this function.)

Also, drop the redundant information "on %s" because dev_err() shows
which device the message is related to.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-27 14:43:43 +02:00
Maxime Ripard fb5b778808 pinctrl: sunxi: Add irq_chip name
In order to ease the debugging, add a name to the irq_chips.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-27 14:05:16 +02:00
Maxime Ripard a0d6de9bdf pinctrl: sunxi: Use common functions to change irq_chip and handler
The current code uses some custom variable affectations, while we have
common functions to do exactly that. Move to the common functions.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-27 14:05:04 +02:00
Baruch Siach 38b0e5071e pinctrl: driver for Conexant Digicolor CX92755 pin mapping
This adds pinctrl and gpio driver to the CX92755 SoC "General
Purpose Pin Mapping" hardware block. The CX92755 is one SoC
from the Conexant Digicolor series. Pin mapping hardware supports
configuring pins as either GPIO, or up to 3 other "client select"
functions. This driver adds support for pin muxing using the
generic device tree binding, and a basic gpiolib driver for
the GPIO functionality.

This driver does not currently support GPIO interrupts, and
pad configuration.

v2:
* Address review comments for Linus Walleij:
  - Add a pointer to pinctrl_desc in struct dc_pinmap
  - Drop the now redundant pinctrl_pin_desc field
  - Adapt dc_get_group_{name,pins} to these changes, and
    add a comment explaining the 1-to-1 pin-groups relation
* Staticise dc_pmxops
* Protect the GP_CLIENTSEL clct parameter with parenthesis

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-27 11:47:25 +02:00
Linus Walleij ab4a936247 pinctrl: nomadik: assure GPIO chips are populated
If the pin controller probes before the GPIO driver it needs to
populate the GPIO driver state containers ahead of the actual
driver probe as the addresses are used by both halves of the
driver.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-23 09:11:14 +02:00
Linus Walleij 6ca7d2e352 pinctrl: nomadik: find chip from local array
Instead of indexing around the GPIO ranges to find a chip, look directly
in the local array of state containers for nmk_gpio_chip:s.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-23 09:11:09 +02:00
Linus Walleij bc222ef4f7 pinctrl: nomadik: break out state container allocator
Break out the function that allocates the nomadik GPIO chip state
container to its own function.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-23 09:11:04 +02:00
Linus Torvalds 71ebd1af09 Pin control fixes for the v4.2 series:
- Some dead defines dropped from the Samsung driver, was
   targeted for -rc2 but got delayed
 - Drop the strict mode from abx500, this was too strict
 - Fix the R-Car sparse IRQs code to work as intended
 - Fix the IRQ code for the pinctrl-single GPIO backend to not
   enforce threaded IRQs
 - Clear the latched events/IRQs for the Broadcom BCM2835
   driver
 - Fix up debugfs for the Freescale imx1 driver
 - Fix a typo bug in the Schmitt Trigger setup in the LPC18xx
   driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVrpAVAAoJEEEQszewGV1zeq8P/1hIdJfHYpVb5whr4Cxq2JFh
 RHKFCBGI75JDj+K7dBjJkflBxnb158rFA7QxEumEFp2VnWFUzlFJeirGDM9KArXO
 Wxsp+Lm9oO8U7T1dUXhsEZJTmVNXSiNcYbuaYOkxtuVn4YlVSS/XB3T8dcXPzKRG
 3BHuKnOA5qpcvM9FaA1O1UiPwR/wc/SrtX38+c1Wt0dXJO+Tgj9PtiiK6iUQHskZ
 rbsxXZEBTP2mcmBBXNtMXbAh9qnL88uG44zSEv1nTDr/jHVYftIVnTdQ07ICT3S9
 mCKEloeZuvHPIkttZ9Ddlj5Jf5PbaqvJllSHhE9FPGEjkOgAtfNdf0zN+Zbqhj0F
 aZAHtknYRsOXFDKAHJckUvXlumFrOSd/8vDIeaVwC807Lz190syBdgUbKVBtzZYf
 r7+HC1y3XIyLk2M2ZiQLwaYJPr5DJqxNgxMm7Wg/E0mmwScPhvMhrYKNJQvSu2f2
 hE/l0XigFxaY7JYAj49ltjaCOKXy02IMGTcT7MAYS9mSWeI8XFI+xPN2ZjiUkQLS
 4nLG4oC9FfCndcAEYf4f/86L9F1k+5ysH+DsEbkB6aCjz1D3Lijb+IzoRJTH9CE9
 jRyQbhtaC3kPJb7Ucsr4RBVCLOevu8E6xiBp0mdeeSc9a2mHZcrE1IVTU033oNOp
 GDhPSA4vZApj0YJqZdTw
 =pDEn
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:
 "Here are some overly ripe pin control fixes for the v4.2 series.

  They got delayed because of various crap commits and having to clean
  and rinse the patch stack a few times.  Now they are however looking
  good.

   - some dead defines dropped from the Samsung driver, was targeted for
     -rc2 but got delayed
   - drop the strict mode from abx500, this was too strict
   - fix the R-Car sparse IRQs code to work as intended
   - fix the IRQ code for the pinctrl-single GPIO backend to not enforce
     threaded IRQs
   - clear the latched events/IRQs for the Broadcom BCM2835 driver
   - fix up debugfs for the Freescale imx1 driver
   - fix a typo bug in the Schmitt Trigger setup in the LPC18xx driver"

* tag 'pinctrl-v4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: lpc18xx: fix schmitt trigger setup
  Subject: pinctrl: imx1-core: Fix debug output in .pin_config_set callback
  pinctrl: bcm2835: Clear the event latch register when disabling interrupts
  pinctrl: single: ensure pcs irq will not be forced threaded
  sh-pfc: fix sparse GPIOs for R-Car SoCs
  pinctrl: abx500: remove strict mode
  pinctrl: samsung: Remove old unused defines
2015-07-21 15:27:27 -07:00
Joachim Eastwood 681ccdcc75 pinctrl: lpc18xx: fix schmitt trigger setup
The param_val variable is what determines if schmitt
trigger is enabled on a pin or not. A typo here mean
that schmitt trigger was always enabled for standard
and i2c pins.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-20 11:01:53 +02:00
Uwe Kleine-König 9571b25df1 Subject: pinctrl: imx1-core: Fix debug output in .pin_config_set callback
imx1_pinconf_set assumes that the array of pins in struct
imx1_pinctrl_soc_info can be indexed by pin id to get the
pinctrl_pin_desc for a pin. This used to be correct up to commit
607af165c0 which removed some entries from the array and so made it
wrong to access the array by pin id.

The result of this bug is a wrong pin name in the output for small pin
ids and an oops for the bigger ones.

This patch is the result of a discussion that includes patches by Markus
Pargmann and Chris Ruehl.

Fixes: 607af165c0 ("pinctrl: i.MX27: Remove nonexistent pad definitions")
Cc: stable@vger.kernel.org
Reported-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-20 11:01:53 +02:00
Jonathan Bell 714b1dd8f7 pinctrl: bcm2835: Clear the event latch register when disabling interrupts
It's possible to hit a race condition if interrupts are generated on a GPIO
pin when the IRQ line in question is being disabled.

If the interrupt is freed, bcm2835_gpio_irq_disable() is called which
disables the event generation sources (edge, level). If an event occurred
between the last disabling of hard IRQs and the write to the event
source registers, a bit would be set in the GPIO event detect register
(GPEDSn) which goes unacknowledged by bcm2835_gpio_irq_handler()
so Linux complains loudly.

There is no per-GPIO mask register, so when disabling GPIO interrupts
write 1 to the relevant bit in GPEDSn to clear out any stale events.

Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-20 11:01:52 +02:00
Grygorii Strashko c10372e615 pinctrl: single: ensure pcs irq will not be forced threaded
The PSC IRQ is requested using request_irq() API and as result it can
be forced to be threaded IRQ in RT-Kernel if PCS_QUIRK_HAS_SHARED_IRQ
is enabled for pinctrl domain.

As result, following 'possible irq lock inversion dependency' report
can be seen:
=========================================================
[ INFO: possible irq lock inversion dependency detected ]
3.14.43-rt42-00360-g96ff499-dirty #24 Not tainted
---------------------------------------------------------
irq/369-pinctrl/927 just changed the state of lock:
 (&pcs->lock){+.....}, at: [<c0375b54>] pcs_irq_handle+0x48/0x9c
but this lock was taken by another, HARDIRQ-safe lock in the past:
 (&irq_desc_lock_class){-.....}

and interrupts could create inverse lock ordering between them.

other info that might help us debug this:
 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&pcs->lock);
                               local_irq_disable();
                               lock(&irq_desc_lock_class);
                               lock(&pcs->lock);
  <Interrupt>
    lock(&irq_desc_lock_class);

 *** DEADLOCK ***

no locks held by irq/369-pinctrl/927.

the shortest dependencies between 2nd lock and 1st lock:
  -> (&irq_desc_lock_class){-.....} ops: 58724 {
     IN-HARDIRQ-W at:
                       [<c0090040>] lock_acquire+0x9c/0x158
                       [<c07065c8>] _raw_spin_lock+0x48/0x58
                       [<c009edac>] handle_fasteoi_irq+0x24/0x15c
                       [<c009abb0>] generic_handle_irq+0x3c/0x4c
                       [<c000f83c>] handle_IRQ+0x50/0xa0
                       [<c0008674>] gic_handle_irq+0x3c/0x6c
                       [<c0707a04>] __irq_svc+0x44/0x8c
                       [<c000fc44>] arch_cpu_idle+0x40/0x4c
                       [<c009aadc>] cpu_startup_entry+0x270/0x2e0
                       [<c06fcbf8>] rest_init+0xd4/0xe4
                       [<c0a44bfc>] start_kernel+0x3d0/0x3dc
                       [<80008084>] 0x80008084
     INITIAL USE at:
                      [<c0090040>] lock_acquire+0x9c/0x158
                      [<c070674c>] _raw_spin_lock_irqsave+0x54/0x68
                      [<c009aff8>] __irq_get_desc_lock+0x64/0xa4
                      [<c009e38c>] irq_set_chip+0x30/0x78
                      [<c009ec30>] irq_set_chip_and_handler_name+0x24/0x3c
                      [<c036ca10>] gic_irq_domain_map+0x48/0xb4
                      [<c00a0a80>] irq_domain_associate+0x84/0x1d4
                      [<c00a1154>] irq_create_mapping+0x80/0x11c
                      [<c00a1270>] irq_create_of_mapping+0x80/0x120
                      [<c05cdaa8>] irq_of_parse_and_map+0x34/0x3c
                      [<c0a4ea24>] omap_dm_timer_init_one+0x90/0x30c
                      [<c0a4eef0>] omap5_realtime_timer_init+0x8c/0x48c
                      [<c0a486b0>] time_init+0x28/0x38
                      [<c0a44a6c>] start_kernel+0x240/0x3dc
                      [<80008084>] 0x80008084
   }
   ... key      at: [<c1049ce0>] irq_desc_lock_class+0x0/0x8
   ... acquired at:
   [<c07065c8>] _raw_spin_lock+0x48/0x58
   [<c0375a90>] pcs_irq_unmask+0x58/0xa0
   [<c009ea48>] irq_enable+0x38/0x48
   [<c009ead0>] irq_startup+0x78/0x7c
   [<c009d440>] __setup_irq+0x4a8/0x4f4
   [<c009d5dc>] request_threaded_irq+0xb8/0x138
   [<c0415a5c>] omap_8250_startup+0x4c/0x148
   [<c041276c>] serial8250_startup+0x24/0x30
   [<c040d0ec>] uart_startup.part.9+0x5c/0x1b4
   [<c040dbcc>] uart_open+0xf4/0x16c
   [<c03f0540>] tty_open+0x170/0x61c
   [<c0157028>] chrdev_open+0xbc/0x1b4
   [<c0150494>] do_dentry_open+0x1e8/0x2bc
   [<c0150a84>] finish_open+0x44/0x5c
   [<c0160d50>] do_last.isra.47+0x710/0xca0
   [<c01613a4>] path_openat+0xc4/0x640
   [<c0162904>] do_filp_open+0x3c/0x98
   [<c0151bdc>] do_sys_open+0x114/0x1d8
   [<c0151cc8>] SyS_open+0x28/0x2c
   [<c0a44d70>] kernel_init_freeable+0x168/0x1e4
   [<c06fcc24>] kernel_init+0x1c/0xf8
   [<c000eee8>] ret_from_fork+0x14/0x20

-> (&pcs->lock){+.....} ops: 65 {
   HARDIRQ-ON-W at:
                    [<c0090040>] lock_acquire+0x9c/0x158
                    [<c07065c8>] _raw_spin_lock+0x48/0x58
                    [<c0375b54>] pcs_irq_handle+0x48/0x9c
                    [<c0375c5c>] pcs_irq_handler+0x1c/0x28
                    [<c009c458>] irq_forced_thread_fn+0x30/0x74
                    [<c009c784>] irq_thread+0x158/0x1c4
                    [<c0063fc4>] kthread+0xd4/0xe8
                    [<c000eee8>] ret_from_fork+0x14/0x20
   INITIAL USE at:
                   [<c0090040>] lock_acquire+0x9c/0x158
                   [<c070674c>] _raw_spin_lock_irqsave+0x54/0x68
                   [<c0375344>] pcs_enable+0x7c/0xe8
                   [<c0372a44>] pinmux_enable_setting+0x178/0x220
                   [<c036fecc>] pinctrl_select_state+0x110/0x194
                   [<c04732dc>] pinctrl_bind_pins+0x7c/0x108
                   [<c045853c>] driver_probe_device+0x70/0x254
                   [<c0458810>] __driver_attach+0x9c/0xa0
                   [<c045674c>] bus_for_each_dev+0x78/0xac
                   [<c0458030>] driver_attach+0x2c/0x30
                   [<c0457c78>] bus_add_driver+0x15c/0x204
                   [<c0458ee0>] driver_register+0x88/0x108
                   [<c045a168>] __platform_driver_register+0x64/0x6c
                   [<c0a8170c>] omap_hsmmc_driver_init+0x1c/0x20
                   [<c0008a94>] do_one_initcall+0x110/0x170
                   [<c0a44d48>] kernel_init_freeable+0x140/0x1e4
                   [<c06fcc24>] kernel_init+0x1c/0xf8
                   [<c000eee8>] ret_from_fork+0x14/0x20
 }
 ... key      at: [<c1088a8c>] __key.18572+0x0/0x8
 ... acquired at:
   [<c008cdd4>] mark_lock+0x388/0x76c
   [<c008df40>] __lock_acquire+0x6d0/0x1f98
   [<c0090040>] lock_acquire+0x9c/0x158
   [<c07065c8>] _raw_spin_lock+0x48/0x58
   [<c0375b54>] pcs_irq_handle+0x48/0x9c
   [<c0375c5c>] pcs_irq_handler+0x1c/0x28
   [<c009c458>] irq_forced_thread_fn+0x30/0x74
   [<c009c784>] irq_thread+0x158/0x1c4
   [<c0063fc4>] kthread+0xd4/0xe8
   [<c000eee8>] ret_from_fork+0x14/0x20

stack backtrace:
CPU: 1 PID: 927 Comm: irq/369-pinctrl Not tainted 3.14.43-rt42-00360-g96ff499-dirty #24
[<c00177e0>] (unwind_backtrace) from [<c00130b0>] (show_stack+0x20/0x24)
[<c00130b0>] (show_stack) from [<c0702958>] (dump_stack+0x84/0xd0)
[<c0702958>] (dump_stack) from [<c008bcfc>] (print_irq_inversion_bug+0x1d0/0x21c)
[<c008bcfc>] (print_irq_inversion_bug) from [<c008bf18>] (check_usage_backwards+0xb4/0x11c)
[<c008bf18>] (check_usage_backwards) from [<c008cdd4>] (mark_lock+0x388/0x76c)
[<c008cdd4>] (mark_lock) from [<c008df40>] (__lock_acquire+0x6d0/0x1f98)
[<c008df40>] (__lock_acquire) from [<c0090040>] (lock_acquire+0x9c/0x158)
[<c0090040>] (lock_acquire) from [<c07065c8>] (_raw_spin_lock+0x48/0x58)
[<c07065c8>] (_raw_spin_lock) from [<c0375b54>] (pcs_irq_handle+0x48/0x9c)
[<c0375b54>] (pcs_irq_handle) from [<c0375c5c>] (pcs_irq_handler+0x1c/0x28)
[<c0375c5c>] (pcs_irq_handler) from [<c009c458>] (irq_forced_thread_fn+0x30/0x74)
[<c009c458>] (irq_forced_thread_fn) from [<c009c784>] (irq_thread+0x158/0x1c4)
[<c009c784>] (irq_thread) from [<c0063fc4>] (kthread+0xd4/0xe8)
[<c0063fc4>] (kthread) from [<c000eee8>] (ret_from_fork+0x14/0x20)

To fix it use IRQF_NO_THREAD to ensure that pcs irq will not be forced threaded.

Cc: Tony Lindgren <tony@atomide.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-20 11:01:52 +02:00
Sergei Shtylyov 61bb3aef92 sh-pfc: fix sparse GPIOs for R-Car SoCs
The PFC driver causes the kernel to hang on the R-Car gen2 SoC based  boards
when the CPU_ALL_PORT() macro is fixed to reflect the reality, i.e. when the
GPIO space becomes actually sparse.  This happens because the _GP_GPIO() macro
includes  an indexed initializer which causes the "holes" (array entries filled
with all 0s) between the groups  of the existing GPIOs; and the driver can't
cope with that.  There seems to  be no reason to use the indexed initializer,
so we can remove the index specifier and so avoid the "holes".

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-20 11:01:52 +02:00
Linus Walleij 27aa2e3a3c pinctrl: abx500: remove strict mode
Commit a21763a0b1
"pinctrl: nomadik: activate strict mux mode"
put all Nomadik pin controllers to strict mode. This was
not good on the Snowball platform: the muxing of GPIOs to
different pins is done with hogs in the DTS file, and then
these GPIOs are used by offset, relying on hogs to mux the
pins. Since that means the pin controller "owns" the pins
and at the same time we have a GPIO user, this pin controller
is by definition not strict.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-20 11:01:51 +02:00
Viresh Kumar da89947b47 Update Viresh Kumar's email address
Switch to my kernel.org alias instead of a badly named gmail address,
which I rarely use.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17 16:39:53 -07:00
kbuild test robot 6de52c1513 pinctrl: pinconf: pinconf_show_config() can be static
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-17 21:56:23 +02:00
Thomas Gleixner eeef97b182 pinctrl/sunxi: Prepare sunxi_pinctrl_irq_handler for irq argument removal
The irq argument of most interrupt flow handlers is unused or merily
used instead of a local variable. The handlers which need the irq
argument can retrieve the irq number from the irq descriptor.

Search and update was done with coccinelle and the invaluable help of
Julia Lawall.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:23 +02:00
Thomas Gleixner 3b0d1561ea pinctrl/sirf: Prepare xxx_gpio-handle_irq for irq argument removal
The irq argument of most interrupt flow handlers is unused or merily
used instead of a local variable. The handlers which need the irq
argument can retrieve the irq number from the irq descriptor.

Search and update was done with coccinelle and the invaluable help of
Julia Lawall.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:22 +02:00
Thomas Gleixner d1800c2347 pinctrl/qcom/msm: Prepare msm_gpio_irq_handler for irq argument removal
The irq argument of most interrupt flow handlers is unused or merily
used instead of a local variable. The handlers which need the irq
argument can retrieve the irq number from the irq descriptor.

Search and update was done with coccinelle and the invaluable help of
Julia Lawall.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:22 +02:00
Thomas Gleixner 415f748c86 pinctrl/rockchip: Prepare rockchip_irq_demux for irq argument removal
The irq argument of most interrupt flow handlers is unused or merily
used instead of a local variable. The handlers which need the irq
argument can retrieve the irq number from the irq descriptor.

Search and update was done with coccinelle and the invaluable help of
Julia Lawall.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:21 +02:00
Thomas Gleixner f43ebaf126 pinctrl/pistachio: Prepare pistachio_gpio_irq_handler for irq argument removal
The irq argument of most interrupt flow handlers is unused or merily
used instead of a local variable. The handlers which need the irq
argument can retrieve the irq number from the irq descriptor.

Search and update was done with coccinelle and the invaluable help of
Julia Lawall.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:21 +02:00
Thomas Gleixner fc02a46938 pinctrl/coh901: Prepare u300_gpio_irq_handler for irq argument removal
The irq argument of most interrupt flow handlers is unused or merily
used instead of a local variable. The handlers which need the irq
argument can retrieve the irq number from the irq descriptor.

Search and update was done with coccinelle and the invaluable help of
Julia Lawall.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:21 +02:00
Thomas Gleixner fa00fecc16 pinctrl/amd: Prepare amd_gpio_irq_handler for irq argument removal
The irq argument of most interrupt flow handlers is unused or merily
used instead of a local variable. The handlers which need the irq
argument can retrieve the irq number from the irq descriptor.

Search and update was done with coccinelle and the invaluable help of
Julia Lawall.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
2015-07-17 21:56:20 +02:00
Jiang Liu 5663bb27de pinctrl: Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc
Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc while we
already have a pointer to corresponding irq_desc.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-17 21:56:20 +02:00
Thomas Gleixner f66eb498ff pinctrl/samsung: Use irq_set_handler_locked()
Use irq_set_handler_locked() as it avoids a redundant lookup of the
irq descriptor.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:20 +02:00
Thomas Gleixner 40ec168ace pinctrl/exynos: Use irq_set_handler_locked()
Use irq_set_handler_locked() as it avoids a redundant lookup of the
irq descriptor.

Search and replacement was done with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:19 +02:00
Thomas Gleixner 34c0ad84f3 pinctrl/qcom: Use irq_set_handler_locked()
Use irq_set_handler_locked() as it avoids a redundant lookup of the
irq descriptor.

Search and replacement was done with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:19 +02:00
Thomas Gleixner 2dbf1bc5a2 pinctrl/rockchip: Use irq_set_handler_locked()
Use irq_set_handler_locked() as it avoids a redundant lookup of the
irq descriptor.

Search and replacement was done with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:18 +02:00
Thomas Gleixner c639845bcb pinctrl/at91: Use irq_set_handler_locked()
Use irq_set_handler_locked() as it avoids a redundant lookup of the
irq descriptor.

Search and replacement was done with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:18 +02:00
Thomas Gleixner 9d8293147e pinctrl/amd: Use irq_set_handler_locked()
Use irq_set_handler_locked() as it avoids a redundant lookup of the
irq descriptor.

Search and replacement was done with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:18 +02:00
Thomas Gleixner e0d6a2c6ce pinctrl/adi2: Use irq_set_handler_locked()
Use irq_set_handler_locked() as it avoids a redundant lookup of the
irq descriptor.

Search and update was done with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:17 +02:00
Thomas Gleixner fc756bcd6a pinctrl/intel: Use irq_set_handler_locked()
Use irq_set_handler_locked() as it avoids a redundant lookup of the
irq descriptor.

Search and replacement was done with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:17 +02:00
Thomas Gleixner a4e3f7830f pinctrl/cherryview: Use irq_set_handler_locked()
Use irq_set_handler_locked() as it avoids a redundant lookup of the
irq descriptor.

Search and replacement was done with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:17 +02:00
Thomas Gleixner f3a085b417 pinctrl/baytrail: Use irq_set_handler_locked()
Use irq_set_handler_locked() as it avoids a redundant lookup of the
irq descriptor.

Search and replacement was done with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:16 +02:00
Thomas Gleixner 1aa74fd0bb pinctrl/bcm2835: Use irq_set_handler_locked()
Use irq_set_handler_locked() as it avoids a redundant lookup of the
irq descriptor.

Search and replacement was done with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:16 +02:00
Thomas Gleixner c21f7849f1 pinctrl/exynos: Consolidate chained IRQ handler install/remove
Chained irq handlers usually set up handler data as well. We now have
a function to set both under irq_desc->lock. Replace the two calls
with one.

Search and conversion was done with coccinelle.

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:16 +02:00
Thomas Gleixner 20d5d142a6 pinctrl: Consolidate chained IRQ handler install/remove
Chained irq handlers usually set up handler data as well. We now have
a function to set both under irq_desc->lock. Replace the two calls
with one.

Search and conversion was done with coccinelle.

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:15 +02:00
Thomas Gleixner 03051bc242 pinctrl/rockchip: Consolidate chained IRQ handler install/remove
Chained irq handlers usually set up handler data as well. We now have
a function to set both under irq_desc->lock. Replace the two calls
with one.

Search and conversion was done with coccinelle.

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:15 +02:00
Timur Tabi 8f1338cd80 pinctrl: add support for Qualcomm Technologies QDF2xxx ARM64 SoCs
Add the pinctrl driver for the Qualcomm Technologies QDF2xxx ARM64 SoCs,
which uses the Qualcomm Technologies TLMM pinctrl/gpio device.  This
driver is probed via ACPI and uses the pinctrl-msm.c backend driver.

This driver is intended to be used only an ACPI-enabled system.  As such,
UEFI will handle all pin control configuration, so this driver does not
provide pin control functions.  It is effectively a GPIO-only driver.

Signed-off-by: Timur Tabi <timur@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-17 21:56:14 +02:00
Bjorn Andersson b4c45fe974 pinctrl: qcom: ssbi: Family A gpio & mpp drivers
This introduces pinctrl drivers for gpio and mpp blocks found in family A
PMICs.

Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-17 21:56:14 +02:00
Bjorn Andersson eb5c144cbb pinctrl: qcom: spmi-mpp: Transpose pinmux function
The "function" of the MPP driver was inherited from the GPIO driver, but the
differences between the two hardware blocks makes both the driver and the
device tree binding to be awkward.

Instead of overloading the "normal" function with various modes this patch
transposes the pinmux function to represent the three operating modes of the
MPP (digital, analog and current sink). The properties of pin pairing and DTEST
routing is moved to separate properties.

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-17 14:31:19 +02:00
Bjorn Andersson 099f3e4add pinctrl: qcom: spmi-mpp: Add support for setting analog output level
When the MPP is configured for analog output the output level is selected by
the AOUT_CTL register, this patch makes it possible to control this.

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-17 14:29:25 +02:00
Joachim Eastwood bd6eab9007 pinctrl: lpc18xx: add support for usb1 pinconf
The dedicated USB1 pins can be configured with pull-down and
for low power mode (suspend). Add support for this in the
pinctrl driver.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-17 14:23:15 +02:00
Jon Hunter d96310aedd pinctrl: pinconf: Fix display of configs
The function pinconf_dbg_config_print() only prints the configuration of
the 1st pin config in an array of pin configurations. Fix this so that
all pin configurations in the array are displayed.

There are a few places in the code where the pin configs are displayed
and so add a helper function to display the pin configs to simplify the
code.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-17 14:20:49 +02:00
Jon Hunter 7562998106 pinctrl: pinconf: Allow groups to be configured via debugfs
The function pinconf_dbg_config_write() currently only supports configuring
a pin configuration mapping via the debugfs. Allow group mappings to also
be configured via the debugfs.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-17 14:19:34 +02:00
Stephen Boyd ad64498762 pinctrl: qcom: Hook pm_power_down for shutdown support
Assign pm_power_off() if we have the PS_HOLD functionality so
that we can properly shutdown the SoC. Otherwise, shutdown won't
do anything besides put the CPU into a tight loop. Unfortunately,
we have to use a singleton here because pm_power_off() doesn't
take any arguments. Fortunately there's only one instance of the
pinctrl device on a running system so this isn't a problem.

Cc: Pramod Gurav <pramod.gurav@smartplayin.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-17 09:59:36 +02:00
Krzysztof Kozlowski 5cde07abcb pinctrl: samsung: Remove old unused defines
Since 9a2c1c3b91 ("pinctrl: samsung: Allow grouping multiple
pinmux/pinconf nodes") the defines for GPIO group and function names are
not used anywhere in the driver.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Inspired-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-17 09:55:55 +02:00
Krzysztof Kozlowski e3f3aaac06 pinctrl: sirf: Drop owner assignment from platform_driver
platform_driver does not need to set an owner because
platform_driver_register() will set it.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16 15:15:12 +02:00
Grygorii Strashko 6417049f66 pinctrl: single: dra7: remove PCS_QUIRK_SHARED_IRQ
On DRA7 there is one pinctrl domain (dra7_pmx_core) and
PRCM wake-up IRQ is not shared, so remove quirk.

Cc: Nishanth Menon <nm@ti.com>
Fixes: 31320beaa3 ('pinctrl: single: Add DRA7 pinctrl compatibility')
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16 14:35:13 +02:00
Geert Uytterhoeven 03c42c3e52 pinctrl: sh-pfc: Remove obsolete r8a7740 platform_device_id entry
Since the removal of the r8a7740 legacy SoC code in commit
44d88c754e ("ARM: shmobile: Remove legacy SoC code for R-Mobile
A1"), r8a7740 is only supported in generic DT-only ARM multi-platform
builds.  The driver doesn't need to match platform devices by name
anymore, hence remove the corresponding platform_device_id entry.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16 11:40:10 +02:00
Geert Uytterhoeven d009fa3b2b pinctrl: sh-pfc: r8a7740: Remove obsolete multi-platform check
Since the removal of the r8a7740 legacy SoC code in commit
44d88c754e ("ARM: shmobile: Remove legacy SoC code for R-Mobile
A1"), r8a7740 is only supported in generic ARM multi-platform builds.
Hence CONFIG_ARCH_MULTIPLATFORM is always set, and the check can be
removed.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16 11:39:17 +02:00
Geert Uytterhoeven 39ad6ff12c pinctrl: sh-pfc: Remove obsolete sh73a0 platform_device_id entry
Since the removal of the sh73a0 legacy SoC code in commit
9a9863987b ("ARM: shmobile: Remove legacy SoC code for SH-Mobile
AG5"), sh73a0 is only supported in generic DT-only ARM multi-platform
builds.  The driver doesn't need to match platform devices by name
anymore, hence remove the corresponding platform_device_id entry.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16 11:38:28 +02:00
Geert Uytterhoeven 9f21c67da6 pinctrl: sh-pfc: sh73a0: Remove obsolete multi-platform check
Since the removal of the sh73a0 legacy SoC code in commit
9a9863987b ("ARM: shmobile: Remove legacy SoC code for SH-Mobile
AG5"), sh73a0 is only supported in generic ARM multi-platform builds.
Hence CONFIG_ARCH_MULTIPLATFORM is always set, and the check can be
removed.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16 11:37:38 +02:00
Geert Uytterhoeven c7977ec4a3 pinctrl: sh-pfc: Convert to platform_get_*()
If the pin function controller (which can be a GPIO controller) is
instantiated before the interrupt controllers, due to the ordering in
the DTS, the irq domains for the interrupt controllers referenced by its
"interrupts-extended" property cannot be found yet:

    irq: no irq domain found for /interrupt-controller@e61c0000 !

As the sh-pfc driver accesses the platform device's resources directly,
it cannot find the (optional) IRQ resources, and thinks no interrupts
are available. This may lead to failures later, when GPIOs are used as
interupts:

    gpio-keys keyboard: Unable to claim irq 0; error -22
    gpio-keys: probe of keyboard failed with error -22

To fix this, add support for deferred probing to sh-pfc, by converting
the driver from direct platform device resource access to using the
platform_get_resource() and platform_get_irq() helpers.

Note that while this fixes the root cause worked around by commit
e4ba0a9bdd ("ARM: shmobile: r8a73a4: Move pfc node to work around
probe ordering bug"), I strongly recommend against reverting the
workaround now, as this would lead to lots of probe deferrals in drivers
relying on pinctrl. This may be reconsidered once the DT code starts
taking into account phandle dependencies during device instantation.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16 11:37:11 +02:00
Laurent Pinchart 16ccaf5bb5 pinctrl: sh-pfc: Accept standard function, pins and groups properties
The "function", "pins" and "groups" pinmux and pinctrl properties have
been standardized. Support them in addition to the custom "renesas,*"
properties. New-style and old-style properties can't be mixed in DT.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16 11:36:52 +02:00
Dan Carpenter 583facb6ae pinctrl: samsung: remove "out of memory" messages
Checkpatch.pl complains about these:

WARNING: Possible unnecessary 'out of memory' message

The messages use a little extra RAM and they add a few extra lines of
code.  We're probably never going to hit these out of memory situations
but if we did then kmalloc() has pretty good error messages built-in.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16 10:21:36 +02:00
Dan Carpenter 8749f8ed5c pinctrl: samsung: don't truncate the last char
We were allocating enough space because sizeof("-grp") and
sizeof("-mux") are both equal to 5 but in the snprintf() we only allowed
for 4 characters so the last 'p' and 'x' characters were truncated.

The allocate and sprintf can be done in one step with the kasprintf().

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16 10:20:03 +02:00
Masahiro Yamada 95b612cc6c pinctrl: move CONFIG_PINCTRL to drivers/Makefile
Kbuild should descend into drivers/pinctrl/ only when CONFIG_PINCTRL
is enabled because everything under that directory depends on
CONFIG_PINCTRL.

We can avoid the conditional, ifeq ($(CONFIG_OF),y) ... endif.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16 09:40:09 +02:00
Masahiro Yamada b3b6616378 pinctrl: UniPhier: add UniPhier PH1-LD6b pinctrl driver
Add pin configuration and pinmux support for UniPhier PH1-LD6b SoC.

Changes in v2:
  - sort groups and funcs alphabetically
  - add i2c pin-mux settings
  - sort members of platform_driver
  - change to tristate
  - add THIS_MODULE to pinctrl_desc
  - use module_platform_driver

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16 09:40:08 +02:00
Masahiro Yamada 3c0fd8e3de pinctrl: UniPhier: add UniPhier ProXstream2 pinctrl driver
Add pin configuration and pinmux support for UniPhier ProXstream2
SoC.

Changes in v2:
  - sort groups and funcs alphabetically
  - add i2c pin-mux settings
  - sort members of platform_driver
  - change to tristate
  - add THIS_MODULE to pinctrl_desc
  - use module_platform_driver

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16 09:40:08 +02:00
Masahiro Yamada 1950b04887 pinctrl: UniPhier: add UniPhier PH1-Pro5 pinctrl driver
Add pin configuration and pinmux support for UniPhier PH1-Pro5 SoC.

Changes in v2:
  - sort groups and funcs alphabetically
  - add i2c pin-mux settings
  - sort members of platform_driver
  - change to tristate
  - add THIS_MODULE to pinctrl_desc
  - use module_platform_driver

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16 09:40:08 +02:00
Masahiro Yamada 95372f9dc8 pinctrl: UniPhier: add UniPhier PH1-sLD8 pinctrl driver
Add pin configuration and pinmux support for UniPhier PH1-sLD8 SoC.

Changes in v2:
  - sort groups and funcs alphabetically
  - add i2c pin-mux settings
  - sort members of platform_driver
  - change to tristate
  - add THIS_MODULE to pinctrl_desc
  - use module_platform_driver

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16 09:40:07 +02:00
Masahiro Yamada b5cf4161ca pinctrl: UniPhier: add UniPhier PH1-Pro4 pinctrl driver
Add pin configuration and pinmux support for UniPhier PH1-Pro4 SoC.

Changes in v2:
  - sort groups and funcs alphabetically
  - add i2c pin-mux settings
  - sort members of platform_driver
  - change to tristate
  - add THIS_MODULE to pinctrl_desc
  - use module_platform_driver

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16 09:40:07 +02:00
Masahiro Yamada edd95a4a95 pinctrl: UniPhier: add UniPhier PH1-LD4 pinctrl driver
Add pin configuration and pinmux support for UniPhier PH1-LD4 SoC.

Changes in v2:
  - sort groups and funcs alphabetically
  - add missing "emmc_dat8" group
  - add i2c pin-mux settings
  - sort members of platform_driver
  - change to tristate
  - add THIS_MODULE to pinctrl_desc
  - use module_platform_driver

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16 09:40:06 +02:00
Masahiro Yamada 6e90889202 pinctrl: UniPhier: add UniPhier pinctrl core support
The core support for the pinctrl drivers for all the UniPhier SoCs.

Changes in v2:
  - drop vogus THIS_MODULE because this file is always built-in
  - drop vogus "include <linux/module.h> because this file is
    always built-in

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16 09:39:38 +02:00
Bjorn Andersson 0e948042c4 pinctrl: qcom: spmi-mpp: Implement support for sink mode
The MPP supports three modes; digital, analog and sink mode. This patch
implements support for the latter.

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16 09:39:04 +02:00
Bjorn Andersson eaaf5dd464 pinctrl: qcom: spmi-mpp: Introduce defines for MODE_CTL
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16 09:39:04 +02:00
Bjorn Andersson 7682b3740d pinctrl: qcom: spmi-mpp: Fixes related to enable handling
There's currently no way to re-enable a mpp block once you've entered a state
that disables the state, this patch makes it possible to leave the
bias-high-impedance state.

Also read the enable state from the hardware on probe.

With this in place the is_enabled variable is accurately tracking the state of
the hardware and we can use that for the debug output as well.

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16 09:39:04 +02:00
Bjorn Andersson ba5f94cd56 pinctrl: qcom: spmi-mpp: Transition to generic dt binding parser
Use the newly introduced extensible generic dt parser instead of rolling
our own dt parsing functions.

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16 09:39:03 +02:00
Masahiro Yamada fb00de771b pinctrl: simplify of_pinctrl_get()
This commit does not change the logic at all.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16 09:39:03 +02:00
Frank Li 9612327c1f pinctrl: imx: add i.mx6ul subdriver
Add i.MX6UL pinctrl driver support.

Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16 09:39:02 +02:00
Laurent Pinchart 441f77dcf8 sh-pfc: r8a7791: remove non-existing GPIO pins
GPIO banks 1 and 7 are missing pins 26 to 31. Remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16 09:39:02 +02:00
Laurent Pinchart b5599df20f sh-pfc: r8a7790: remove non-existing GPIO pins
GPIO banks 1 and 2 are missing pins 30 and 31. Remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16 09:39:01 +02:00
Mario Bambagini 13b8a68a9c added tabs instead of spaces
Tabs have been inserted instead of spaces to indent the code
correctly. Same error fixed four times.

Signed-off-by: Mario Bambagini <mario.bambagini@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16 09:39:01 +02:00
Linus Torvalds d5fb82137b Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
 "This contains:

   - a series of fixes for interrupt drivers to prevent a potential race
     when installing a chained interrupt handler

   - a fix for cpumask pointer misuse

   - a fix for using the wrong interrupt number from struct irq_data

   - removal of unused code and outdated comments

   - a few new helper functions which allow us to cleanup the interrupt
     handling code further in 4.3

   I decided against doing the cleanup at the end of this merge window
   and rather do the preparatory steps for 4.3, so we can run the final
   ABI change at the end of the 4.3 merge window with less risk"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
  ARM/LPC32xx: Use irq not hwirq for __irq_set_handler_locked()
  genirq: Implement irq_set_handler_locked()/irq_set_chip_handler_name_locked()
  genirq: Introduce helper irq_desc_get_irq()
  genirq: Remove irq_node()
  genirq: Clean up outdated comments related to include/linux/irqdesc.h
  mn10300: Fix incorrect use of irq_data->affinity
  MIPS/ralink: Fix race in installing chained IRQ handler
  MIPS/pci: Fix race in installing chained IRQ handler
  MIPS/ath25: Fix race in installing chained IRQ handler
  MIPS/ath25: Fix race in installing chained IRQ handler
  m68k/psc: Fix race in installing chained IRQ handler
  avr32/at32ap: Fix race in installing chained IRQ handler
  sh/intc: Fix race in installing chained IRQ handler
  sh/intc: Fix potential race in installing chained IRQ handler
  pinctrl/sun4i: Fix race in installing chained IRQ handler
  pinctrl/samsung: Fix race in installing chained IRQ handler
  pinctrl/samsung: Fix race in installing chained IRQ handler
  pinctrl/exynos: Fix race in installing chained IRQ handler
  pinctrl/st: Fix race in installing chained IRQ handler
  pinctrl/adi2: Fix race in installing chained IRQ handler
  ...
2015-07-01 15:19:35 -07:00
Linus Torvalds f5dcb68086 ARM: SoC: driver updates for v4.2
Some of these are for drivers/soc, where we're now putting
 SoC-specific drivers these days. Some are for other driver subsystems
 where we have received acks from the appropriate maintainers.
 
 Some highlights:
 
 - simple-mfd: document DT bindings and misc updates
 - migrate mach-berlin to simple-mfd for clock, pinctrl and reset
 - memory: support for Tegra132 SoC
 - memory: introduce tegra EMC driver for scaling memory frequency
 - misc. updates for ARM CCI and CCN busses
 
  Conflicts:
 	arch/arm64/boot/dts/arm/juno-motherboard.dtsi
 
  Trivial add/add conflict with our dt branch.
  Resolution: take both sides.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVi4RRAAoJEFk3GJrT+8ZljIcQAIsqxM/o0drd90xTJ6ex9h0B
 RmqVLTDgesHmBacJ+SBsa9/ybFIM1uErByftc1dmKankEQVXW3wcH7keQnoStPT2
 zTEjadHgZ/ARYjV/oG5oohjfDZpO1kECVHL8O8RmcWxgzRB3az1IW2eD+dzrga/Y
 R7K6D8rDHMADIUmv0e0DzvQEbSUYdCx3rBND1qZznwZDP3NoivLkOG5MTraccLbQ
 ouCRoZtyNYD5Lxk+BHLBepnxAa0Ggc6IjEmiUv8fF2OYdu0OruMliT4rcAtOSmzg
 2Y7pP85h8u0CxbJDkOyc+2BELyKo7Hv97XtDNNbRYABTMXdskRIadXt4Sh4mwFtM
 nvlhB4ovbIX7noECJToEkSAgmStLSUwA3R6+DVdLbeQY4uSuXuTRhiWHMyQB6va9
 CdjJDk2RE0dZ77c5ZoUnUDtBe4cULU/n4agpYkKMf/HcpnqMUwZzP4KZbbPMBpgL
 0CVTt3YrEcjoU7g0SFHhOGPSgl4yIXKU2eHEscokyFYLrS5zRWepmUEmlSoaWn+W
 p7pJE65TvOGf2xbaWI+UBeK/3ZG7XAP8qUfhsi7NS4bV6oFCk/foqsWAuru0H7OW
 2Gk8fuF0qLgE1eFWQp8BHZ4IUeytoWbnGhhHXh8zH39SKAVncOiAGDNfuEP9CyXJ
 fZFfruYrnz2emOwj2v9m
 =02Gm
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Kevin Hilman:
 "Some of these are for drivers/soc, where we're now putting
  SoC-specific drivers these days.  Some are for other driver subsystems
  where we have received acks from the appropriate maintainers.

  Some highlights:

   - simple-mfd: document DT bindings and misc updates
   - migrate mach-berlin to simple-mfd for clock, pinctrl and reset
   - memory: support for Tegra132 SoC
   - memory: introduce tegra EMC driver for scaling memory frequency
   - misc. updates for ARM CCI and CCN busses"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
  drivers: soc: sunxi: Introduce SoC driver to map SRAMs
  arm-cci: Add aliases for PMU events
  arm-cci: Add CCI-500 PMU support
  arm-cci: Sanitise CCI400 PMU driver specific code
  arm-cci: Abstract handling for CCI events
  arm-cci: Abstract out the PMU counter details
  arm-cci: Cleanup PMU driver code
  arm-cci: Do not enable CCI-400 PMU by default
  firmware: qcom: scm: Add HDCP Support
  ARM: berlin: add an ADC node for the BG2Q
  ARM: berlin: remove useless chip and system ctrl compatibles
  clk: berlin: drop direct of_iomap of nodes reg property
  ARM: berlin: move BG2Q clock node
  ARM: berlin: move BG2CD clock node
  ARM: berlin: move BG2 clock node
  clk: berlin: prepare simple-mfd conversion
  pinctrl: berlin: drop SoC stub provided regmap
  ARM: berlin: move pinctrl to simple-mfd nodes
  pinctrl: berlin: prepare to use regmap provided by syscon
  reset: berlin: drop arch_initcall initialization
  ...
2015-06-26 11:54:29 -07:00
Thomas Gleixner ef80e87d20 pinctrl/sun4i: Fix race in installing chained IRQ handler
Fix a race where a pending interrupt could be received and the handler
called before the handler's data has been setup, by converting to
irq_set_chained_handler_and_data().

Search and conversion was done with coccinelle:

@@
expression E1, E2, E3;
@@
(
-if (irq_set_chained_handler(E1, E3) != 0)
-   BUG();
|
-irq_set_chained_handler(E1, E3);
)
-irq_set_handler_data(E1, E2);
+irq_set_chained_handler_and_data(E1, E3, E2);

@@
expression E1, E2, E3;
@@
(
-if (irq_set_chained_handler(E1, E3) != 0)
-   BUG();
...
|
-irq_set_chained_handler(E1, E3);
...
)
-irq_set_handler_data(E1, E2);
+irq_set_chained_handler_and_data(E1, E3, E2);

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Fan Wu <fwu@marvell.com>
Cc: abdoulaye berthe <berthe.ab@gmail.com>
Cc: Alexandre Courbot <acourbot@nvidia.com>
Cc: linux-gpio@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
2015-06-25 11:57:17 +02:00
Thomas Gleixner 623a650ebc pinctrl/samsung: Fix race in installing chained IRQ handler
Fix a race where a pending interrupt could be received and the handler
called before the handler's data has been setup, by converting to
irq_set_chained_handler_and_data().

Search and conversion was done with coccinelle:

@@
expression E1, E2, E3;
@@
(
-if (irq_set_chained_handler(E1, E3) != 0)
-   BUG();
|
-irq_set_chained_handler(E1, E3);
)
-irq_set_handler_data(E1, E2);
+irq_set_chained_handler_and_data(E1, E3, E2);

@@
expression E1, E2, E3;
@@
(
-if (irq_set_chained_handler(E1, E3) != 0)
-   BUG();
...
|
-irq_set_chained_handler(E1, E3);
...
)
-irq_set_handler_data(E1, E2);
+irq_set_chained_handler_and_data(E1, E3, E2);

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Thomas Abraham <thomas.abraham@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
2015-06-25 11:57:15 +02:00
Thomas Gleixner 0cfc45cfdf pinctrl/samsung: Fix race in installing chained IRQ handler
Fix a race where a pending interrupt could be received and the handler
called before the handler's data has been setup, by converting to
irq_set_chained_handler_and_data().

Search and conversion was done with coccinelle:

@@
expression E1, E2, E3;
@@
(
-if (irq_set_chained_handler(E1, E3) != 0)
-   BUG();
|
-irq_set_chained_handler(E1, E3);
)
-irq_set_handler_data(E1, E2);
+irq_set_chained_handler_and_data(E1, E3, E2);

@@
expression E1, E2, E3;
@@
(
-if (irq_set_chained_handler(E1, E3) != 0)
-   BUG();
...
|
-irq_set_chained_handler(E1, E3);
...
)
-irq_set_handler_data(E1, E2);
+irq_set_chained_handler_and_data(E1, E3, E2);

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Thomas Abraham <thomas.abraham@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
2015-06-25 11:57:13 +02:00
Thomas Gleixner bb56fc3577 pinctrl/exynos: Fix race in installing chained IRQ handler
Fix a race where a pending interrupt could be received and the handler
called before the handler's data has been setup, by converting to
irq_set_chained_handler_and_data().

Search and conversion was done with coccinelle:

@@
expression E1, E2, E3;
@@
(
-if (irq_set_chained_handler(E1, E3) != 0)
-   BUG();
|
-irq_set_chained_handler(E1, E3);
)
-irq_set_handler_data(E1, E2);
+irq_set_chained_handler_and_data(E1, E3, E2);

@@
expression E1, E2, E3;
@@
(
-if (irq_set_chained_handler(E1, E3) != 0)
-   BUG();
...
|
-irq_set_chained_handler(E1, E3);
...
)
-irq_set_handler_data(E1, E2);
+irq_set_chained_handler_and_data(E1, E3, E2);

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Thomas Abraham <thomas.abraham@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
2015-06-25 11:57:11 +02:00
Thomas Gleixner 1b11b0cb79 pinctrl/st: Fix race in installing chained IRQ handler
Fix a race where a pending interrupt could be received and the handler
called before the handler's data has been setup, by converting to
irq_set_chained_handler_and_data().

Search and conversion was done with coccinelle:

@@
expression E1, E2, E3;
@@
(
-if (irq_set_chained_handler(E1, E3) != 0)
-   BUG();
|
-irq_set_chained_handler(E1, E3);
)
-irq_set_handler_data(E1, E2);
+irq_set_chained_handler_and_data(E1, E3, E2);

@@
expression E1, E2, E3;
@@
(
-if (irq_set_chained_handler(E1, E3) != 0)
-   BUG();
...
|
-irq_set_chained_handler(E1, E3);
...
)
-irq_set_handler_data(E1, E2);
+irq_set_chained_handler_and_data(E1, E3, E2);

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Srinivas Kandagatla <srinivas.kandagatla@gmail.com>
Cc: Maxime Coquelin <maxime.coquelin@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: kernel@stlinux.com
Cc: linux-gpio@vger.kernel.org
2015-06-25 11:57:09 +02:00
Thomas Gleixner bb6d6dd386 pinctrl/adi2: Fix race in installing chained IRQ handler
Fix a race where a pending interrupt could be received and the handler
called before the handler's data has been setup, by converting to
irq_set_chained_handler_and_data().

Search and conversion was done with coccinelle:

@@
expression E1, E2, E3;
@@
(
-if (irq_set_chained_handler(E1, E3) != 0)
-   BUG();
|
-irq_set_chained_handler(E1, E3);
)
-irq_set_handler_data(E1, E2);
+irq_set_chained_handler_and_data(E1, E3, E2);

@@
expression E1, E2, E3;
@@
(
-if (irq_set_chained_handler(E1, E3) != 0)
-   BUG();
...
|
-irq_set_chained_handler(E1, E3);
...
)
-irq_set_handler_data(E1, E2);
+irq_set_chained_handler_and_data(E1, E3, E2);

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-06-25 11:57:07 +02:00
Thomas Gleixner 1e10592136 pinctrl/mediatek: Fix race in installing chained IRQ handler
Fix a race where a pending interrupt could be received and the handler
called before the handler's data has been setup, by converting to
irq_set_chained_handler_and_data().

Search and conversion was done with coccinelle:

@@
expression E1, E2, E3;
@@
(
-if (irq_set_chained_handler(E1, E3) != 0)
-   BUG();
|
-irq_set_chained_handler(E1, E3);
)
-irq_set_handler_data(E1, E2);
+irq_set_chained_handler_and_data(E1, E3, E2);

@@
expression E1, E2, E3;
@@
(
-if (irq_set_chained_handler(E1, E3) != 0)
-   BUG();
...
|
-irq_set_chained_handler(E1, E3);
...
)
-irq_set_handler_data(E1, E2);
+irq_set_chained_handler_and_data(E1, E3, E2);

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Hongzhou Yang <hongzhou.yang@mediatek.com>
Cc: Axel Lin <axel.lin@ingics.com>
Cc: Yingjoe Chen <yingjoe.chen@mediatek.com>
Cc: Maoguang Meng <maoguang.meng@mediatek.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: linux-gpio@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
2015-06-25 11:57:04 +02:00
Linus Torvalds 93a4b1b946 Here is the bulk of pin control changes for the v4.2 series:
- Core functionality:
   - Enable exclusive pin ownership: it is possible to flag a pin
     controller so that GPIO and other functions cannot use a single
     pin simultaneously.
 
 - New drivers:
   - NXP LPC18xx System Control Unit pin controller
   - Imagination Pistachio SoC pin controller
 
 - New subdrivers:
   - Freescale i.MX7d SoC
   - Intel Sunrisepoint-H PCH
   - Renesas PFC R8A7793
   - Renesas PFC R8A7794
   - Mediatek MT6397, MT8127
   - SiRF Atlas 7
   - Allwinner A33
   - Qualcomm MSM8660
   - Marvell Armada 395
   - Rockchip RK3368
 
 - Cleanups:
   - A big cleanup of the Marvell MVEBU driver rectifying it to
     correspond to reality
   - Drop platform device probing from the SH PFC driver, we are now a
     DT only shop for SuperH
   - Drop obsolte multi-platform check for SH PFC
   - Various janitorial: constification, grammar etc
 
 - Improvements:
   - The AT91 GPIO portions now supports the set_multiple() feature
   - Split out SPI pins on the Xilinx Zynq
   - Support DTs without specific function nodes in the i.MX driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVin37AAoJEEEQszewGV1zIlQP/i6+C47z3OV67hYAOmlGoynl
 wsdTFbyp+GIPl3N1r0lRzxOfQsuc9t93iDMrC5ssN9VFaj8MgH/j3XKWf5A55iVn
 u7nNQzIFjzTwl58/Pu4oM+d9l5i26o44teFKh3xI4aup4AFed3+lDkQtRipgo29c
 V4y+6SaQxQ46e2qaOAM20gEagm2a8EvChn1Zo/HLQnnmZcKBxgObJna7iTZWm+fN
 LzyBWtczFYPxfQ9IqYzklyeou4ohfrcHzqN71IEtmGMXxob+i04QS9FQXaPitgBG
 UORjwFVh8690n3ETQobjLrylOF5F/3+RdCGqanYOLgaJ0aix4+EByLz9FbxLPnJk
 4Utijk2SKxLUb3dXZIfpwKtmPmvLJkFqwSazN5WDIg9Rjqz/H1p9UTWP0cfPRwJa
 9INDZeK833kjYdtK6UMBpuNFkgGtpKTlhMX/cI78KYsEwVgK8r69b7uNr+2OUMgh
 4i7dbHgb5/NpHlUlacVPTBvXf7C1iQ//vqh0Oc20lp/mAY1tVGuYRHno6QVyRtfS
 DmCNPtbAgCa9FmP/t5NA8a3wana2ObTT2NCNMGEue7tJxVX4YaLpwIAEnUSHSJOQ
 seI8HT2M1yEiSes9V+OuigHt3pKk68fMe0ZqDkovcd4QBlub6WTAPXWrXpbHtBCo
 k+hT8TlDYaDbQkNDzXtg
 =UyKm
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "Here is the bulk of pin control changes for the v4.2 series: Quite a
  lot of new SoC subdrivers and two new main drivers this time, apart
  from that business as usual.

  Details:

  Core functionality:
   - Enable exclusive pin ownership: it is possible to flag a pin
     controller so that GPIO and other functions cannot use a single pin
     simultaneously.

  New drivers:
   - NXP LPC18xx System Control Unit pin controller
   - Imagination Pistachio SoC pin controller

  New subdrivers:
   - Freescale i.MX7d SoC
   - Intel Sunrisepoint-H PCH
   - Renesas PFC R8A7793
   - Renesas PFC R8A7794
   - Mediatek MT6397, MT8127
   - SiRF Atlas 7
   - Allwinner A33
   - Qualcomm MSM8660
   - Marvell Armada 395
   - Rockchip RK3368

  Cleanups:
   - A big cleanup of the Marvell MVEBU driver rectifying it to
     correspond to reality
   - Drop platform device probing from the SH PFC driver, we are now a
     DT only shop for SuperH
   - Drop obsolte multi-platform check for SH PFC
   - Various janitorial: constification, grammar etc

  Improvements:
   - The AT91 GPIO portions now supports the set_multiple() feature
   - Split out SPI pins on the Xilinx Zynq
   - Support DTs without specific function nodes in the i.MX driver"

* tag 'pinctrl-v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits)
  pinctrl: rockchip: add support for the rk3368
  pinctrl: rockchip: generalize perpin driver-strength setting
  pinctrl: sh-pfc: r8a7794: add SDHI pin groups
  pinctrl: sh-pfc: r8a7794: add MMCIF pin groups
  pinctrl: sh-pfc: add R8A7794 PFC support
  pinctrl: make pinctrl_register() return proper error code
  pinctrl: mvebu: armada-39x: add support for Armada 395 variant
  pinctrl: mvebu: armada-39x: add missing SATA functions
  pinctrl: mvebu: armada-39x: add missing PCIe functions
  pinctrl: mvebu: armada-38x: add ptp functions
  pinctrl: mvebu: armada-38x: add ua1 functions
  pinctrl: mvebu: armada-38x: add nand functions
  pinctrl: mvebu: armada-38x: add sata functions
  pinctrl: mvebu: armada-xp: add dram functions
  pinctrl: mvebu: armada-xp: add nand rb function
  pinctrl: mvebu: armada-xp: add spi1 function
  pinctrl: mvebu: armada-39x: normalize ref clock naming
  pinctrl: mvebu: armada-xp: rename spi to spi0
  pinctrl: mvebu: armada-370: align spi1 clock pin naming
  pinctrl: mvebu: armada-370: align VDD cpu-pd pin naming with datasheet
  ...
2015-06-24 19:21:02 -07:00
Heiko Stübner daecdc6696 pinctrl: rockchip: add support for the rk3368
The rk3368 is the first ARM64 soc from Rockchip, but seems to share most
peripherals with the ARM32 soc, including the pinctrl functionality.
The only notable difference is - as with every Rockchip soc - that the
offsets in the General Register Files moved around and a split of the pmu
section of the rk3288 into pmu and pmugrf (pmu general register files)
sections. The pinctrl driver of course only needs the pmugrf registers
for controlling the pin settings.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-17 10:21:02 +02:00
Heiko Stübner ef17f69f5b pinctrl: rockchip: generalize perpin driver-strength setting
The upcoming support for the RK3368 ARM64 SoC also supports perpin
drive strength settings (at different register positions), so generalize
the register and offset calculation to easily support this one too.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-17 10:20:00 +02:00
Shinobu Uehara 7ac91bda80 pinctrl: sh-pfc: r8a7794: add SDHI pin groups
Add SDHI0/1/2 pin groups to R8A7794 PFC driver.

Signed-off-by: Shinobu Uehara <shinobu.uehara.xc@renesas.com>
[Sergei: renamed SD data pins to match the driver, rebased, renamed, added
changelog.]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-16 10:55:09 +02:00
Shinobu Uehara f1f74b640c pinctrl: sh-pfc: r8a7794: add MMCIF pin groups
Add MMCIF pin groups to R8A7794 PFC driver.

Signed-off-by: Shinobu Uehara <shinobu.uehara.xc@renesas.com>
[Sergei: rebased, renamed, added changelog.]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-16 10:54:01 +02:00
Hisashi Nakamura 43c4436e2f pinctrl: sh-pfc: add R8A7794 PFC support
Add PFC support for  the  R8A7794 SoC  including pin groups for some
on-chip devices such as ETH, I2C, INTC, MSIOF, QSPI, [H]SCIF...

Sergei: squashed together several patches, fixed the MLB_CLK typo,
added IRQ4.. IRQ9 pin groups, fixed IRQn comments, added ETH B pin
group names, removed stray new line and fixed typos in the  comments
in the pinmux_config_regs[] initializer, removed the platform device
ID, took into account limited number of signals in the GPIO1/5/6
controllers, added reasonable and removed unreasonable
copyrights, modified the bindings document, renamed, added changelog.

Changes in version 5:
- resolved rejects, refreshed the patch;
- added Laurent Pinchart's ACK.

Changes in version 4:
- reused the PORT_GP_26() macro to #define PORT_GP_28().

Changes in version 3:
- removed the platform device ID;
- added PORT_GP_26() and PORT_GP_28() macros, used them for GPIO1/5/6 in the
  CPU_ALL_PORT() macro.

Changes in version 2:
- rebased the patch.

Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-16 10:53:20 +02:00
Masahiro Yamada 323de9efdf pinctrl: make pinctrl_register() return proper error code
Currently, pinctrl_register() just returns NULL on error, so the
callers can not know the exact reason of the failure.

Some of the pinctrl drivers return -EINVAL, some -ENODEV, and some
-ENOMEM on error of pinctrl_register(), although the error code
might be different from the real cause of the error.

This commit reworks pinctrl_register() to return the appropriate
error code and modifies all of the pinctrl drivers to use IS_ERR()
for the error checking and PTR_ERR() for getting the error code.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Ray Jui <rjui@broadcom.com>
Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Hongzhou Yang <hongzhou.yang@mediatek.com>
Acked-by: Wei Chen <Wei.Chen@csr.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-10 14:49:52 +02:00
Thomas Petazzoni e73ac02dc1 pinctrl: mvebu: armada-39x: add support for Armada 395 variant
The Armada 39x SoC family has grown a new variant, the Armada 395,
which sits between the Armada 390 and Armada 398 in terms of
features. This commit adds support for this additional variant to the
Armada 39x pinctrl driver.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-10 14:36:34 +02:00
Thomas Petazzoni 6afc0c0f5b pinctrl: mvebu: armada-39x: add missing SATA functions
The latest version of the Armada 39x datasheet documents several new
SATA related functions on various MPP pins. This commit adds the
description of these new functions to the Armada 39x pinctrl driver as
well as to its DT binding documentation.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-10 14:34:56 +02:00
Thomas Petazzoni c0adb877a2 pinctrl: mvebu: armada-39x: add missing PCIe functions
The latest version of the Armada 39x datasheet documents several new
PCIe related functions on various MPP pins. This commit adds the
description of these new functions to the Armada 39x pinctrl driver as
well as to its DT binding documentation.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-10 14:31:39 +02:00
Thomas Petazzoni f9dbbe011c pinctrl: mvebu: armada-38x: add ptp functions
The latest version of the Armada 38x datasheet documents several new
PTP related functions on various MPP pins. This commit adds the
description of these new functions to the Armada 38x pinctrl driver as
well as to its DT binding documentation.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-10 14:30:44 +02:00
Thomas Petazzoni f7ad5b29ce pinctrl: mvebu: armada-38x: add ua1 functions
The latest version of the Armada 38x datasheet documents several new
UART1 related functions on various MPP pins. This commit adds the
description of these new functions to the Armada 38x pinctrl driver as
well as to its DT binding documentation.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-10 14:29:54 +02:00
Thomas Petazzoni 9ce28fccb0 pinctrl: mvebu: armada-38x: add nand functions
The latest version of the Armada 38x datasheet documents several new
NAND related functions on various MPP pins. This commit adds the
description of these new functions to the Armada 38x pinctrl driver as
well as to its DT binding documentation.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-10 14:24:57 +02:00
Thomas Petazzoni 503cfd9f8a pinctrl: mvebu: armada-38x: add sata functions
The latest version of the Armada 38x datasheet documents several new
SATA related functions on various MPP pins. This commit adds the
description of these new functions to the Armada 38x pinctrl driver as
well as to its DT binding documentation.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-10 14:18:27 +02:00
Thomas Petazzoni b19bf37976 pinctrl: mvebu: armada-xp: add dram functions
The latest Armada XP datasheet documents several new DRAM related
functions on various MPPs. This commit adds the description of these
new functions in the Armada XP pinctrl driver and its DT binding
documentation.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-10 14:11:50 +02:00
Thomas Petazzoni fb53b61d77 pinctrl: mvebu: armada-xp: add nand rb function
The latest version of the Armada XP datasheet documents a new
NAND-related MPP function on MPP48, for which this commit adds
support.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-10 14:11:01 +02:00