Commit Graph

569 Commits

Author SHA1 Message Date
Linus Torvalds 3b59bf0816 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking merge from David Miller:
 "1) Move ixgbe driver over to purely page based buffering on receive.
     From Alexander Duyck.

  2) Add receive packet steering support to e1000e, from Bruce Allan.

  3) Convert TCP MD5 support over to RCU, from Eric Dumazet.

  4) Reduce cpu usage in handling out-of-order TCP packets on modern
     systems, also from Eric Dumazet.

  5) Support the IP{,V6}_UNICAST_IF socket options, making the wine
     folks happy, from Erich Hoover.

  6) Support VLAN trunking from guests in hyperv driver, from Haiyang
     Zhang.

  7) Support byte-queue-limtis in r8169, from Igor Maravic.

  8) Outline code intended for IP_RECVTOS in IP_PKTOPTIONS existed but
     was never properly implemented, Jiri Benc fixed that.

  9) 64-bit statistics support in r8169 and 8139too, from Junchang Wang.

  10) Support kernel side dump filtering by ctmark in netfilter
      ctnetlink, from Pablo Neira Ayuso.

  11) Support byte-queue-limits in gianfar driver, from Paul Gortmaker.

  12) Add new peek socket options to assist with socket migration, from
      Pavel Emelyanov.

  13) Add sch_plug packet scheduler whose queue is controlled by
      userland daemons using explicit freeze and release commands.  From
      Shriram Rajagopalan.

  14) Fix FCOE checksum offload handling on transmit, from Yi Zou."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1846 commits)
  Fix pppol2tp getsockname()
  Remove printk from rds_sendmsg
  ipv6: fix incorrent ipv6 ipsec packet fragment
  cpsw: Hook up default ndo_change_mtu.
  net: qmi_wwan: fix build error due to cdc-wdm dependecy
  netdev: driver: ethernet: Add TI CPSW driver
  netdev: driver: ethernet: add cpsw address lookup engine support
  phy: add am79c874 PHY support
  mlx4_core: fix race on comm channel
  bonding: send igmp report for its master
  fs_enet: Add MPC5125 FEC support and PHY interface selection
  net: bpf_jit: fix BPF_S_LDX_B_MSH compilation
  net: update the usage of CHECKSUM_UNNECESSARY
  fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on tx
  net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso
  ixgbe: Fix issues with SR-IOV loopback when flow control is disabled
  net/hyperv: Fix the code handling tx busy
  ixgbe: fix namespace issues when FCoE/DCB is not enabled
  rtlwifi: Remove unused ETH_ADDR_LEN defines
  igbvf: Use ETH_ALEN
  ...

Fix up fairly trivial conflicts in drivers/isdn/gigaset/interface.c and
drivers/net/usb/{Kconfig,qmi_wwan.c} as per David.
2012-03-20 21:04:47 -07:00
Cong Wang a24401bcf4 highmem: kill all __kmap_atomic()
[swarren@nvidia.com: highmem: Fix ARM build break due to __kmap_atomic rename]

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20 21:48:30 +08:00
Thomas Gleixner bd2f55361f sched/rt: Use schedule_preempt_disabled()
Coccinelle based conversion.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-24swm5zut3h9c4a6s46x8rws@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-01 10:28:03 +01:00
Ben Greear 3bdc0eba0b net: Add framework to allow sending packets with customized CRC.
This is useful for testing RX handling of frames with bad
CRCs.

Requires driver support to actually put the packet on the
wire properly.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-24 01:37:35 -08:00
Bjorn Helgaas fb127cb9de PCI: collapse pcibios_resource_to_bus
Everybody uses the generic pcibios_resource_to_bus() supplied by the core
now, so remove the ARCH_HAS_GENERIC_PCI_OFFSETS used during conversion.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-02-23 20:19:04 -07:00
Bjorn Helgaas 4b84b6e9b4 mn10300/PCI: get rid of device resource fixups
Tell the PCI core about host bridge address translation so it can take
care of bus-to-resource conversion for us.

CC: David Howells <dhowells@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-02-23 20:19:02 -07:00
Pavel Emelyanov ef64a54f6e sock: Introduce the SO_PEEK_OFF sock option
This one specifies where to start MSG_PEEK-ing queue data from. When
set to negative value means that MSG_PEEK works as ususally -- peeks
from the head of the queue always.

When some bytes are peeked from queue and the peeking offset is non
negative it is moved forward so that the next peek will return next
portion of data.

When non-peeking recvmsg occurs and the peeking offset is non negative
is is moved backward so that the next peek will still peek the proper
data (i.e. the one that would have been picked if there were no non
peeking recv in between).

The offset is set using per-proto opteration to let the protocol handle
the locking issues and to check whether the peeking offset feature is
supported by the protocol the socket belongs to.

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-21 15:03:48 -05:00
H. Peter Anvin e96d322875 mn10300: Use generic posix_types.h
Change the mn10300 architecture to use <asm-generic/posix_types.h>.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Link: http://lkml.kernel.org/r/1328677745-20121-14-git-send-email-hpa@zytor.com
Cc: David Howells <dhowells@redhat.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
2012-02-14 12:01:29 -08:00
Linus Torvalds dca88ad691 Merge branch 'for-next' of git://git.infradead.org/users/dhowells/linux-headers
* 'for-next' of git://git.infradead.org/users/dhowells/linux-headers:
  UAPI: Split trivial #if defined(__KERNEL__) && X conditionals
  UAPI: Don't have a #elif clause in a __KERNEL__ guard in linux/soundcard.h
  UAPI: Fix AHZ multiple inclusion when __KERNEL__ is removed
  UAPI: Make linux/patchkey.h easier to parse
  UAPI: Fix nested __KERNEL__ guards in video/edid.h
  UAPI: Alter the S390 asm include guards to be recognisable by the UAPI splitter
  UAPI: Guard linux/cuda.h
  UAPI: Guard linux/pmu.h
  UAPI: Guard linux/isdn_divertif.h
  UAPI: Guard linux/sound.h
  UAPI: Rearrange definition of HZ in asm-generic/param.h
  UAPI: Make FRV use asm-generic/param.h
  UAPI: Make M32R use asm-generic/param.h
  UAPI: Make MN10300 use asm-generic/param.h
  UAPI: elf_read_implies_exec() is a kernel-only feature - so hide from userspace
  UAPI: Don't include linux/compat.h in sparc's asm/siginfo.h
  UAPI: Fix arch/mips/include/asm/Kbuild to have separate header-y lines
2012-01-14 18:03:30 -08:00
Joe Perches ff2d8b19a3 treewide: convert uses of ATTRIB_NORETURN to __noreturn
Use the more commonly used __noreturn instead of ATTRIB_NORETURN.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12 20:13:03 -08:00
Linus Torvalds 7b67e75147 Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: (80 commits)
  x86/PCI: Expand the x86_msi_ops to have a restore MSIs.
  PCI: Increase resource array mask bit size in pcim_iomap_regions()
  PCI: DEVICE_COUNT_RESOURCE should be equal to PCI_NUM_RESOURCES
  PCI: pci_ids: add device ids for STA2X11 device (aka ConneXT)
  PNP: work around Dell 1536/1546 BIOS MMCONFIG bug that breaks USB
  x86/PCI: amd: factor out MMCONFIG discovery
  PCI: Enable ATS at the device state restore
  PCI: msi: fix imbalanced refcount of msi irq sysfs objects
  PCI: kconfig: English typo in pci/pcie/Kconfig
  PCI/PM/Runtime: make PCI traces quieter
  PCI: remove pci_create_bus()
  xtensa/PCI: convert to pci_scan_root_bus() for correct root bus resources
  x86/PCI: convert to pci_create_root_bus() and pci_scan_root_bus()
  x86/PCI: use pci_scan_bus() instead of pci_scan_bus_parented()
  x86/PCI: read Broadcom CNB20LE host bridge info before PCI scan
  sparc32, leon/PCI: convert to pci_scan_root_bus() for correct root bus resources
  sparc/PCI: convert to pci_create_root_bus()
  sh/PCI: convert to pci_scan_root_bus() for correct root bus resources
  powerpc/PCI: convert to pci_create_root_bus()
  powerpc/PCI: split PHB part out of pcibios_map_io_space()
  ...

Fix up conflicts in drivers/pci/msi.c and include/linux/pci_regs.h due
to the same patches being applied in other branches.
2012-01-11 18:50:26 -08:00
Linus Torvalds e343a895a9 lib: use generic pci_iomap on all architectures
Many architectures don't want to pull in iomap.c,
 so they ended up duplicating pci_iomap from that file.
 That function isn't trivial, and we are going to modify it
 https://lkml.org/lkml/2011/11/14/183
 so the duplication hurts.
 
 This reduces the scope of the problem significantly,
 by moving pci_iomap to a separate file and
 referencing that from all architectures.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJPBZXBAAoJECgfDbjSjVRpuuYIAIMD0wE96MuTOSBJX4VG8VAP
 UyjL9dsfMRy8CKioQo5/fxpTY07YBCWmNauSSX7pzgcoUKBfYIGn4Z1qwGYsWK9M
 CzLs6PXLTugw0FtKobHZl/klRTWEBS6YOUjp9x568rplwF+Ppk7b993uj7eS/g+e
 T0mUKzqg4/UavbHd9+W5KgC4drQ5hgtu2WZHoUxBK4umnd3C2G+U82Sthg50o/XU
 SC8IGm39K8I36HoIWgXj3Y7nkOP3mQELohOT4ZPiVSmLvGS4i47+ix75anO+8ZvZ
 jxHr8RC85IK1Nd89NZhbKOyvx0QQiwoKUZaTwcWXJNSOADzZnM6icdIsodc+Elo=
 =ccQZ
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

lib: use generic pci_iomap on all architectures

Many architectures don't want to pull in iomap.c,
so they ended up duplicating pci_iomap from that file.
That function isn't trivial, and we are going to modify it
https://lkml.org/lkml/2011/11/14/183
so the duplication hurts.

This reduces the scope of the problem significantly,
by moving pci_iomap to a separate file and
referencing that from all architectures.

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  alpha: drop pci_iomap/pci_iounmap from pci-noop.c
  mn10300: switch to GENERIC_PCI_IOMAP
  mn10300: add missing __iomap markers
  frv: switch to GENERIC_PCI_IOMAP
  tile: switch to GENERIC_PCI_IOMAP
  tile: don't panic on iomap
  sparc: switch to GENERIC_PCI_IOMAP
  sh: switch to GENERIC_PCI_IOMAP
  powerpc: switch to GENERIC_PCI_IOMAP
  parisc: switch to GENERIC_PCI_IOMAP
  mips: switch to GENERIC_PCI_IOMAP
  microblaze: switch to GENERIC_PCI_IOMAP
  arm: switch to GENERIC_PCI_IOMAP
  alpha: switch to GENERIC_PCI_IOMAP
  lib: add GENERIC_PCI_IOMAP
  lib: move GENERIC_IOMAP to lib/Kconfig

Fix up trivial conflicts due to changes nearby in arch/{m68k,score}/Kconfig
2012-01-10 18:04:27 -08:00
Linus Torvalds eb59c505f8 Merge branch 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
* 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits)
  PM / Hibernate: Implement compat_ioctl for /dev/snapshot
  PM / Freezer: fix return value of freezable_schedule_timeout_killable()
  PM / shmobile: Allow the A4R domain to be turned off at run time
  PM / input / touchscreen: Make st1232 use device PM QoS constraints
  PM / QoS: Introduce dev_pm_qos_add_ancestor_request()
  PM / shmobile: Remove the stay_on flag from SH7372's PM domains
  PM / shmobile: Don't include SH7372's INTCS in syscore suspend/resume
  PM / shmobile: Add support for the sh7372 A4S power domain / sleep mode
  PM: Drop generic_subsys_pm_ops
  PM / Sleep: Remove forward-only callbacks from AMBA bus type
  PM / Sleep: Remove forward-only callbacks from platform bus type
  PM: Run the driver callback directly if the subsystem one is not there
  PM / Sleep: Make pm_op() and pm_noirq_op() return callback pointers
  PM/Devfreq: Add Exynos4-bus device DVFS driver for Exynos4210/4212/4412.
  PM / Sleep: Merge internal functions in generic_ops.c
  PM / Sleep: Simplify generic system suspend callbacks
  PM / Hibernate: Remove deprecated hibernation snapshot ioctls
  PM / Sleep: Fix freezer failures due to racy usermodehelper_is_disabled()
  ARM: S3C64XX: Implement basic power domain support
  PM / shmobile: Use common always on power domain governor
  ...

Fix up trivial conflict in fs/xfs/xfs_buf.c due to removal of unused
XBT_FORCE_SLEEP bit
2012-01-08 13:10:57 -08:00
Linus Torvalds 972b2c7199 Merge branch 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
* 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (165 commits)
  reiserfs: Properly display mount options in /proc/mounts
  vfs: prevent remount read-only if pending removes
  vfs: count unlinked inodes
  vfs: protect remounting superblock read-only
  vfs: keep list of mounts for each superblock
  vfs: switch ->show_options() to struct dentry *
  vfs: switch ->show_path() to struct dentry *
  vfs: switch ->show_devname() to struct dentry *
  vfs: switch ->show_stats to struct dentry *
  switch security_path_chmod() to struct path *
  vfs: prefer ->dentry->d_sb to ->mnt->mnt_sb
  vfs: trim includes a bit
  switch mnt_namespace ->root to struct mount
  vfs: take /proc/*/mounts and friends to fs/proc_namespace.c
  vfs: opencode mntget() mnt_set_mountpoint()
  vfs: spread struct mount - remaining argument of next_mnt()
  vfs: move fsnotify junk to struct mount
  vfs: move mnt_devname
  vfs: move mnt_list to struct mount
  vfs: switch pnode.h macros to struct mount *
  ...
2012-01-08 12:19:57 -08:00
Bjorn Helgaas 9a4580011d mn10300/PCI: convert to pci_scan_root_bus() for correct root bus resources
Convert from pci_scan_bus() to pci_scan_root_bus() and remove root bus
resource fixups.  This fixes the problem of "early" and "header" quirks
seeing incorrect root bus resources.

CC: David Howells <dhowells@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-06 12:11:03 -08:00
Myron Stowe be0adeeced PCI: mn10300: use generic pcibios_set_master()
This patch removes mn10300's architecture-specific 'pcibios_set_master()'
routine for ASB2305 and lets the default PCI core based implementation
handle PCI device 'latency timer' setup.

No functional change.

Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-06 12:10:45 -08:00
Myron Stowe 96c5590058 PCI: Pull PCI 'latency timer' setup up into the core
The 'latency timer' of PCI devices, both Type 0 and Type 1,
is setup in architecture-specific code [see: 'pcibios_set_master()'].
There are two approaches being taken by all the architectures - check
if the 'latency timer' is currently set between 16 and 255 and if not
bring it within bounds, or, do nothing (and then there is the
gratuitously different PA-RISC implementation).

There is nothing architecture-specific about PCI's 'latency timer' so
this patch pulls its setup functionality up into the PCI core by
creating a generic 'pcibios_set_master()' function using the '__weak'
attribute which can be used by all architectures as a default which,
if necessary, can then be over-ridden by architecture-specific code.

No functional change.

Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-06 12:10:42 -08:00
Al Viro 84dfa9897e consolidate a bunch of ipcbuf.h instances
... some still remain weird :-/

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:55:18 -05:00
Al Viro 0583fcc96b consolidate umode_t declarations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:55:17 -05:00
David Howells b0b8c552e8 UAPI: Make MN10300 use asm-generic/param.h
Make MN10300 use the generic settings to be found in asm-generic/param.h
rather than defining its own as they're exactly the same.

This sorts out a problem with HZ being redefined after the UAPI split.

Signed-off-by: David Howells <dhowells@redhat.com>
2011-12-12 13:54:36 +00:00
Michael S. Tsirkin 34f1bdee19 mn10300: switch to GENERIC_PCI_IOMAP
The pci_iomap variant that arch/mn10300/unit-asb2305/pci-iomap.c
uses differs from the generic one in that it does
not use ioremap_nocache for PCI addresses.
However, it turns out that PCI addresses are
automatically noncached, so switching to ioremap_nocache
and to the generic implementation is safe.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-12-04 16:00:17 +02:00
Michael S. Tsirkin 2ebf5d0d79 mn10300: add missing __iomap markers
MN10300's *ioremap*() collection lacks __iomem markers.
Fix that.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-12-04 16:00:14 +02:00
Tejun Heo d88e4cb671 freezer: remove now unused TIF_FREEZE
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-arch@vger.kernel.org
2011-11-21 12:32:25 -08:00
John W. Linville e11c259f74 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
Conflicts:
	include/net/bluetooth/bluetooth.h
2011-11-17 13:11:43 -05:00
Johannes Berg 6e3e939f3b net: add wireless TX status socket option
The 802.1X EAPOL handshake hostapd does requires
knowing whether the frame was ack'ed by the peer.
Currently, we fudge this pretty badly by not even
transmitting the frame as a normal data frame but
injecting it with radiotap and getting the status
out of radiotap monitor as well. This is rather
complex, confuses users (mon.wlan0 presence) and
doesn't work with all hardware.

To get rid of that hack, introduce a real wifi TX
status option for data frame transmissions.

This works similar to the existing TX timestamping
in that it reflects the SKB back to the socket's
error queue with a SCM_WIFI_STATUS cmsg that has
an int indicating ACK status (0/1).

Since it is possible that at some point we will
want to have TX timestamping and wifi status in a
single errqueue SKB (there's little point in not
doing that), redefine SO_EE_ORIGIN_TIMESTAMPING
to SO_EE_ORIGIN_TXSTATUS which can collect more
than just the timestamp; keep the old constant
as an alias of course. Currently the internal APIs
don't make that possible, but it wouldn't be hard
to split them up in a way that makes it possible.

Thanks to Neil Horman for helping me figure out
the functions that add the control messages.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09 16:01:02 -05:00
Andy Shevchenko 50e1499f46 kgdb: follow rename pack_hex_byte() to hex_byte_pack()
There is no functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:56 -07:00
Linus Torvalds 39adff5f69 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  time, s390: Get rid of compile warning
  dw_apb_timer: constify clocksource name
  time: Cleanup old CONFIG_GENERIC_TIME references that snuck in
  time: Change jiffies_to_clock_t() argument type to unsigned long
  alarmtimers: Fix error handling
  clocksource: Make watchdog reset lockless
  posix-cpu-timers: Cure SMP accounting oddities
  s390: Use direct ktime path for s390 clockevent device
  clockevents: Add direct ktime programming function
  clockevents: Make minimum delay adjustments configurable
  nohz: Remove "Switched to NOHz mode" debugging messages
  proc: Consider NO_HZ when printing idle and iowait times
  nohz: Make idle/iowait counter update conditional
  nohz: Fix update_ts_time_stat idle accounting
  cputime: Clean up cputime_to_usecs and usecs_to_cputime macros
  alarmtimers: Rework RTC device selection using class interface
  alarmtimers: Add try_to_cancel functionality
  alarmtimers: Add more refined alarm state tracking
  alarmtimers: Remove period from alarm structure
  alarmtimers: Remove interval cap limit hack
  ...
2011-10-26 17:15:03 +02:00
John Stultz dcb69290af time: Cleanup old CONFIG_GENERIC_TIME references that snuck in
Awhile back I removed all the CONFIG_GENERIC_TIME referecnes as
the last of the non-GENERIC_TIME arches were converted.

However, due to the functionality being important and around for
awhile, there apparently were some out of tree hardware enablement
patches that used it and have since been merged.

This patch removes the remaining instances of GENERIC_TIME.

Singed-off-by: John Stultz <john.stultz@linaro.org>
2011-10-04 13:07:47 -07:00
Paul Bolle 395cf9691d doc: fix broken references
There are numerous broken references to Documentation files (in other
Documentation files, in comments, etc.). These broken references are
caused by typo's in the references, and by renames or removals of the
Documentation files. Some broken references are simply odd.

Fix these broken references, sometimes by dropping the irrelevant text
they were part of.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-27 18:08:04 +02:00
NeilBrown f5b9409973 All Arch: remove linkage for sys_nfsservctl system call
The nfsservctl system call is now gone, so we should remove all
linkage for it.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-26 15:09:58 -07:00
Arun Sharma 7847777a45 atomic: cleanup asm-generic atomic*.h inclusion
After changing all consumers of atomics to include <linux/atomic.h>, we
ran into some compile time errors due to this dependency chain:

linux/atomic.h
  -> asm/atomic.h
    -> asm-generic/atomic-long.h

where atomic-long.h could use funcs defined later in linux/atomic.h
without a prototype.  This patches moves the code that includes
asm-generic/atomic*.h to linux/atomic.h.

Archs that need <asm-generic/atomic64.h> need to select
CONFIG_GENERIC_ATOMIC64 from now on (some of them used to include it
unconditionally).

Compile tested on i386 and x86_64 with allnoconfig.

Signed-off-by: Arun Sharma <asharma@fb.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:49:47 -07:00
Arun Sharma f24219b4e9 atomic: move atomic_add_unless to generic code
This is in preparation for more generic atomic primitives based on
__atomic_add_unless.

Signed-off-by: Arun Sharma <asharma@fb.com>
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:49:47 -07:00
Arun Sharma 60063497a9 atomic: use <linux/atomic.h>
This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>

Signed-off-by: Arun Sharma <asharma@fb.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:49:47 -07:00
Akinobu Mita 148817ba09 asm-generic: add another generic ext2 atomic bitops
The majority of architectures implement ext2 atomic bitops as
test_and_{set,clear}_bit() without spinlock.

This adds this type of generic implementation in ext2-atomic-setbit.h and
use it wherever possible.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Suggested-by: Andreas Dilger <adilger@dilger.ca>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:49:46 -07:00
Mike Frysinger 0e9a6cb5e6 ptrace: unify show_regs() prototype
[ poleg@redhat.com: no need to declare show_regs() in ptrace.h, sched.h does this ]
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:49:43 -07:00
Mathias Krause b45d59fb92 mn10300, exec: remove redundant set_fs(USER_DS)
The address limit is already set in flush_old_exec() so this
set_fs(USER_DS) is redundant.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:49:41 -07:00
Jonas Bonn 66574cc054 modules: make arch's use default loader hooks
This patch removes all the module loader hook implementations in the
architecture specific code where the functionality is the same as that
now provided by the recently added default hooks.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-07-24 22:06:04 +09:30
David Howells 35052cffe0 MN10300: asm/uaccess.h needs to #include linux/kernel.h for might_sleep()
MN10300's asm/uaccess.h needs to #include linux/kernel.h to get might_sleep()
otherwise it fails to build on MN10300 allyesconfig.  This fails in a few
places with messages like the following:

  In file included from security/keys/trusted.c:14:
  include/linux/uaccess.h: In function '__copy_from_user_nocache':
  include/linux/uaccess.h:52: error: implicit declaration of function 'might_sleep'

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-21 18:31:44 -07:00
David Howells 40182373ac MN10300: Add missing _sdata declaration
_sdata needs to be declared in the linker script now as of commit
a2d063ac21 ("extable, core_kernel_data(): Make sure all archs define
_sdata")

Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-07 19:03:53 -07:00
David Howells db1c9dfa64 MN10300: die_if_no_fixup() shouldn't use get_user() as it doesn't call set_fs()
die_if_no_fixup() shouldn't use get_user() as it doesn't call set_fs() to
indicate that it wants to probe a kernel address.  Instead it should use
probe_kernel_read().

This fixes the problem of gdb seeing SIGILL rather than SIGTRAP when hitting
the KGDB special breakpoint upon SysRq+g being seen.  The problem was that
die_if_no_fixup() was failing to read the opcode of the instruction that caused
the exception, and thus not fixing up the exception.

This caused gdb to get a S04 response to the $? request in its remote protocol
rather than S05 - which would then cause it to continue with $C04 rather than
$c in an attempt to pass the signal onto the inferior process.  The kernel,
however, does not support $Cnn, and so objects by returning an E22 response,
indicating an error.  gdb does not expect this and prints:

	warning: Remote failure reply: E22

and then returns to the gdb command prompt unable to continue.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-07 19:03:52 -07:00
David Howells 2e65d1f6ee MN10300: Fix one of the kernel debugger cacheflush variants
One of the kernel debugger cacheflush variants escaped proper testing.  Two of
the labels are wrong, being derived from the code that was copied to construct
the variant.

The first label results in the following assembler message:

    AS      arch/mn10300/mm/cache-dbg-flush-by-reg.o
  arch/mn10300/mm/cache-dbg-flush-by-reg.S: Assembler messages:
  arch/mn10300/mm/cache-dbg-flush-by-reg.S:123: Error: symbol `debugger_local_cache_flushinv_no_dcache' is already defined

And the second label results in the following linker message:

  arch/mn10300/mm/built-in.o:(.text+0x1d39): undefined reference to `mn10300_local_icache_inv_range_reg_end'
  arch/mn10300/mm/built-in.o:(.text+0x1d39): relocation truncated to fit: R_MN10300_PCREL16 against undefined symbol `mn10300_local_icache_inv_range_reg_end'

To test this file the following configuration pieces must be set:

	CONFIG_AM34=y
	CONFIG_MN10300_CACHE_WBACK=y
	CONFIG_MN10300_DEBUGGER_CACHE_FLUSH_BY_REG=y
	CONFIG_MN10300_CACHE_MANAGE_BY_REG=y
	CONFIG_AM34_HAS_CACHE_SNOOP=n

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-07 19:03:52 -07:00
Linus Torvalds 571503e100 Merge branch 'setns'
* setns:
  ns: Wire up the setns system call

Done as a merge to make it easier to fix up conflicts in arm due to
addition of sendmmsg system call
2011-05-28 10:51:01 -07:00
Eric W. Biederman 7b21fddd08 ns: Wire up the setns system call
32bit and 64bit on x86 are tested and working.  The rest I have looked
at closely and I can't find any problems.

setns is an easy system call to wire up.  It just takes two ints so I
don't expect any weird architecture porting problems.

While doing this I have noticed that we have some architectures that are
very slow to get new system calls.  cris seems to be the slowest where
the last system calls wired up were preadv and pwritev.  avr32 is weird
in that recvmmsg was wired up but never declared in unistd.h.  frv is
behind with perf_event_open being the last syscall wired up.  On h8300
the last system call wired up was epoll_wait.  On m32r the last system
call wired up was fallocate.  mn10300 has recvmmsg as the last system
call wired up.  The rest seem to at least have syncfs wired up which was
new in the 2.6.39.

v2: Most of the architecture support added by Daniel Lezcano <dlezcano@fr.ibm.com>
v3: ported to v2.6.36-rc4 by: Eric W. Biederman <ebiederm@xmission.com>
v4: Moved wiring up of the system call to another patch
v5: ported to v2.6.39-rc6
v6: rebased onto parisc-next and net-next to avoid syscall  conflicts.
v7: ported to Linus's latest post 2.6.39 tree.

>  arch/blackfin/include/asm/unistd.h     |    3 ++-
>  arch/blackfin/mach-common/entry.S      |    1 +
Acked-by: Mike Frysinger <vapier@gentoo.org>

Oh - ia64 wiring looks good.
Acked-by: Tony Luck <tony.luck@intel.com>

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-28 10:48:39 -07:00
Akinobu Mita 63e424c844 arch: remove CONFIG_GENERIC_FIND_{NEXT_BIT,BIT_LE,LAST_BIT}
By the previous style change, CONFIG_GENERIC_FIND_NEXT_BIT,
CONFIG_GENERIC_FIND_BIT_LE, and CONFIG_GENERIC_FIND_LAST_BIT are not used
to test for existence of find bitops anymore.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26 17:12:38 -07:00
Daniel Lezcano a77aea9201 cgroup: remove the ns_cgroup
The ns_cgroup is an annoying cgroup at the namespace / cgroup frontier and
leads to some problems:

  * cgroup creation is out-of-control
  * cgroup name can conflict when pids are looping
  * it is not possible to have a single process handling a lot of
    namespaces without falling in a exponential creation time
  * we may want to create a namespace without creating a cgroup

  The ns_cgroup was replaced by a compatibility flag 'clone_children',
  where a newly created cgroup will copy the parent cgroup values.
  The userspace has to manually create a cgroup and add a task to
  the 'tasks' file.

This patch removes the ns_cgroup as suggested in the following thread:

https://lists.linux-foundation.org/pipermail/containers/2009-June/018616.html

The 'cgroup_clone' function is removed because it is no longer used.

This is a userspace-visible change.  Commit 45531757b4 ("cgroup: notify
ns_cgroup deprecated") (merged into 2.6.27) caused the kernel to emit a
printk warning users that the feature is planned for removal.  Since that
time we have heard from XXX users who were affected by this.

Signed-off-by: Daniel Lezcano <daniel.lezcano@free.fr>
Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jamal Hadi Salim <hadi@cyberus.ca>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>
Acked-by: Matt Helsley <matthltc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26 17:12:34 -07:00
KOSAKI Motohiro 8ea9716fd6 mn10300: convert old cpumask API into new one
Adapt to the new API.

We plan to remove old cpumask APIs later.  Thus this patch converts them
into the new one.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 08:39:39 -07:00
Peter Zijlstra 1c39517696 mm: now that all old mmu_gather code is gone, remove the storage
Fold all the mmu_gather rework patches into one for submission

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reported-by: Hugh Dickins <hughd@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Miller <davem@davemloft.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Tony Luck <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 08:39:16 -07:00
Linus Torvalds 5129df03d0 Merge branch 'for-2.6.40' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
* 'for-2.6.40' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: Unify input section names
  percpu: Avoid extra NOP in percpu_cmpxchg16b_double
  percpu: Cast away printk format warning
  percpu: Always align percpu output section to PAGE_SIZE

Fix up fairly trivial conflict in arch/x86/include/asm/percpu.h as per Tejun
2011-05-24 11:53:42 -07:00
Peter Zijlstra 184748cc50 sched: Provide scheduler_ipi() callback in response to smp_send_reschedule()
For future rework of try_to_wake_up() we'd like to push part of that
function onto the CPU the task is actually going to run on.

In order to do so we need a generic callback from the existing scheduler IPI.

This patch introduces such a generic callback: scheduler_ipi() and
implements it as a NOP.

BenH notes: PowerPC might use this IPI on offline CPUs under rare conditions!

Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reviewed-by: Frank Rowand <frank.rowand@am.sony.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110405152728.744338123@chello.nl
2011-04-14 08:52:32 +02:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Thomas Gleixner 78c8982564 genirq: Remove the now obsolete config options and select statements
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-30 14:13:23 +02:00
Thomas Gleixner 2a8f55b1f5 mn10300: Use generic show_interrupts()
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29 14:48:19 +02:00
Thomas Gleixner 232f1d8591 mn10300: Cleanup irq_desc access
The migration needs only access to irq_data.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29 14:48:18 +02:00
Thomas Gleixner f4c547ebb4 mn10300: Convert genirq namespace
Convert to new function names. Converted with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29 14:48:18 +02:00
Tejun Heo 0415b00d17 percpu: Always align percpu output section to PAGE_SIZE
Percpu allocator honors alignment request upto PAGE_SIZE and both the
percpu addresses in the percpu address space and the translated kernel
addresses should be aligned accordingly.  The calculation of the
former depends on the alignment of percpu output section in the kernel
image.

The linker script macros PERCPU_VADDR() and PERCPU() are used to
define this output section and the latter takes @align parameter.
Several architectures are using @align smaller than PAGE_SIZE breaking
percpu memory alignment.

This patch removes @align parameter from PERCPU(), renames it to
PERCPU_SECTION() and makes it always align to PAGE_SIZE.  While at it,
add PCPU_SETUP_BUG_ON() checks such that alignment problems are
reliably detected and remove percpu alignment comment recently added
in workqueue.c as the condition would trigger BUG way before reaching
there.

For um, this patch raises the alignment of percpu area.  As the area
is in .init, there shouldn't be any noticeable difference.

This problem was discovered by David Howells while debugging boot
failure on mn10300.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Cc: uclinux-dist-devel@blackfin.uclinux.org
Cc: David Howells <dhowells@redhat.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: user-mode-linux-devel@lists.sourceforge.net
2011-03-24 18:50:09 +01:00
Linus Torvalds 3dab04e697 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300:
  MN10300: gcc 4.6 vs am33 inline assembly
  MN10300: Deprecate gdbstub
  MN10300: Allow KGDB to use the MN10300 serial ports
  MN10300: Emulate single stepping in KGDB on MN10300
  MN10300: Generalise kernel debugger kernel halt, reboot or power off hook
  KGDB: Notify GDB of machine halt, reboot or power off
  MN10300: Use KGDB
  MN10300: Create generic kernel debugger hooks
  MN10300: Create general kernel debugger cache flushing
  MN10300: Introduce a general config option for kernel debugger hooks
  MN10300: The icache invalidate functions should disable the icache first
  MN10300: gdbstub: Restrict single-stepping to non-preemptable non-SMP configs
2011-03-24 10:07:50 -07:00
Akinobu Mita 61f2e7b0f4 bitops: remove minix bitops from asm/bitops.h
minix bit operations are only used by minix filesystem and useless by
other modules.  Because byte order of inode and block bitmaps is different
on each architecture like below:

m68k:
	big-endian 16bit indexed bitmaps

h8300, microblaze, s390, sparc, m68knommu:
	big-endian 32 or 64bit indexed bitmaps

m32r, mips, sh, xtensa:
	big-endian 32 or 64bit indexed bitmaps for big-endian mode
	little-endian bitmaps for little-endian mode

Others:
	little-endian bitmaps

In order to move minix bit operations from asm/bitops.h to architecture
independent code in minix filesystem, this provides two config options.

CONFIG_MINIX_FS_BIG_ENDIAN_16BIT_INDEXED is only selected by m68k.
CONFIG_MINIX_FS_NATIVE_ENDIAN is selected by the architectures which use
native byte order bitmaps (h8300, microblaze, s390, sparc, m68knommu,
m32r, mips, sh, xtensa).  The architectures which always use little-endian
bitmaps do not select these options.

Finally, we can remove minix bit operations from asm/bitops.h for all
architectures.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Michal Simek <monstr@monstr.eu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 19:46:22 -07:00
Akinobu Mita f312eff816 bitops: remove ext2 non-atomic bitops from asm/bitops.h
As the result of conversions, there are no users of ext2 non-atomic bit
operations except for ext2 filesystem itself.  Now we can put them into
architecture independent code in ext2 filesystem, and remove from
asm/bitops.h for all architectures.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 19:46:21 -07:00
Akinobu Mita 861b5ae7cd bitops: introduce little-endian bitops for most architectures
Introduce little-endian bit operations to the big-endian architectures
which do not have native little-endian bit operations and the
little-endian architectures.  (alpha, avr32, blackfin, cris, frv, h8300,
ia64, m32r, mips, mn10300, parisc, sh, sparc, tile, x86, xtensa)

These architectures can just include generic implementation
(asm-generic/bitops/le.h).

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <willy@debian.org>
Cc: Grant Grundler <grundler@parisc-linux.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Zankel <chris@zankel.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 19:46:15 -07:00
Richard Henderson 5a4b65ab50 MN10300: gcc 4.6 vs am33 inline assembly
GCC 4.6 explicitly represents the MDR register.  It may be accessed
via the "z" constraint.  Perhaps more importantly, it tracks when
the MDR register is clobbered and uses the RETF instruction if the
incoming value is still valid.

Thus it is important to (at least) clobber the MDR register in
relevant inline assembly fragments, lest RETF be used incorrectly.

The only instances I could find are here.  There are reads of the
MDR register in kernel/gdb-stub.c, but that's harmless.  Although,
frankly, __builtin_return_address(0) might be a better thing in
those cases.  Certainly MDR isn't going to contain anything else
that might be useful...

Signed-off-by: Richard Henderson  <rth@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2011-03-23 17:42:49 +00:00
FUJITA Tomonori 3e50594e8e add the common dma_addr_t typedef to include/linux/types.h
All architectures can use the common dma_addr_t typedef now. We can
remove the arch specific dma_addr_t.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Matt Turner <mattst88@gmail.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:09 -07:00
Eric Dumazet b6a84016bd mm: NUMA aware alloc_thread_info_node()
Add a node parameter to alloc_thread_info(), and change its name to
alloc_thread_info_node()

This change is needed to allow NUMA aware kthread_create_on_cpu()

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tejun Heo <tj@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:01 -07:00
David Howells 1a8d59e529 MN10300: Deprecate gdbstub
Deprecate the MN10300 arch's gdbstub in favour of KGDB, which is more capable
in some areas (such as SMP) and almost as capable in others (it's I/O is not as
decoupled and it can't start as early).  gdbstub will be removed in a later
version when we're satisfied with KGDB's working.

Signed-off-by: David Howells <dhowells@redhat.com>
2011-03-18 16:54:32 +00:00
David Howells 52885b32a5 MN10300: Allow KGDB to use the MN10300 serial ports
Allow KGDB to use the MN10300 serial ports through the polled I/O interface
provided via the TTY/serial layer and the kgdboc driver.  This allows the
kernel to be started with something like:

	kgdboc=ttySM0,115200

added to the command line.

Signed-off-by: David Howells <dhowells@redhat.com>
2011-03-18 16:54:32 +00:00
David Howells 5141c46c61 MN10300: Emulate single stepping in KGDB on MN10300
Emulate single stepping in KGDB on MN10300 by way of temporary breakpoint
insertion.  These breakpoints are never actually seen by KGDB, and will overlay
KGDB's own breakpoints.

The breakpoints are removed by switch_to() and reinstalled on switching back so
that if preemption occurs, the preempting task doesn't hit them (though it will
still hit KGDB's regular breakpoints).  If KGDB is reentered for any reason,
then the single step breakpoint is completely erased and must be set again by
the debugger.

We take advantage of the fact that KGDB will effectively halt all other CPUs
whilst this CPU is single-stepping to avoid SMP problems.

If the single-stepping task is preempted and killed without KGDB being
reinvoked, then the breakpoint(s) will be cleared and KGDB will be jumped back
into.

Signed-off-by: David Howells <dhowells@redhat.com>
2011-03-18 16:54:32 +00:00
David Howells 044264bbe3 MN10300: Generalise kernel debugger kernel halt, reboot or power off hook
Generalise the kernel debugger hook for notification of halt, reboot or power
off.  This is used by gdbstub to tell the debugger it is exiting.  This will be
useful for KGDB too.

Signed-off-by: David Howells <dhowells@redhat.com>
2011-03-18 16:54:31 +00:00
David Howells e460d64405 MN10300: Use KGDB 2011-03-18 16:54:31 +00:00
David Howells 67ddb4052d MN10300: Create generic kernel debugger hooks
Create generic kernel debugger hooks in the MN10300 arch and make gdbstub use
them.  This is a preparation for KGDB support.

Signed-off-by: David Howells <dhowells@redhat.com>
2011-03-18 16:54:30 +00:00
David Howells 7f386ac327 MN10300: Create general kernel debugger cache flushing
Create general kernel debugger cache flushing for MN10300 and get rid of the
old stuff that gdbstub was using.

Signed-off-by: David Howells <dhowells@redhat.com>
2011-03-18 16:54:30 +00:00
David Howells 792576b1c5 MN10300: Introduce a general config option for kernel debugger hooks
Introduce a general config option for kernel debugger hooks so that both
gdbstub and kgdb can use it and add a header file for both debuggers to use.

Signed-off-by: David Howells <dhowells@redhat.com>
2011-03-18 16:54:30 +00:00
David Howells b75bb2365d MN10300: The icache invalidate functions should disable the icache first
The icache invalidate functions should disable the icache on AM33 and wait for
it to quiesce before attempting to invalidate it, and should then wait for it
to quiesce again before reenabling it, but on AM34 they should invalidate
directly.  The same goes for the dcache invalidation, but this isn't used much.

Whilst we're at it, this can be wrapped in assembler macros to remove duplicate
code.

The AM33 manual states that:

	An operation that invalidates the cache, switches the writing mode, or
	changes the way mode must be performed after disabling the cache,
	checking the busy bit, and confirming that the cache is not in
	operation.

for the dcache [sec 2.8.3.2.1].  This is not stated so for the icache [sec
2.8.3.1.1] but the example code there suggests that it is.

Whilst the AM34 manual states that the cache must be disabled for both the
icache [sec 1.8.3.2.1] and the dcache [sec 1.8.3.2.1], the Panasonic hardware
engineers say the manual is wrong and that disabling the caches for
invalidation is wrong.

Furthermore, they say that disabling the caches on the AM34 whilst running an
SMP kernel can lead to incoherency between the various CPU caches and should
thus be avoided.

Signed-off-by: David Howells <dhowells@redhat.com>
2011-03-18 16:54:29 +00:00
David Howells 9ee21723cc MN10300: gdbstub: Restrict single-stepping to non-preemptable non-SMP configs
Restrict single-stepping through the kernel using gdbstub to non-preemptable
non-SMP configs as gdbstub has to do software single-stepping by means of
temporary breakpoints.  Hardware single-stepping is unavailable as Panasonic
have not sufficiently documented the interface to it.

Software single-stepping through preemptable or SMP kernels runs into problems
as it makes it much more likely that the wrong thread will hit the temporary
breakpoints.  It seems impractical to work around the problem for the most
part.  It could be possible to make a UP preemptable kernel switch temporary
breakpoints in and out in switch_to().

Signed-off-by: David Howells <dhowells@redhat.com>
2011-03-18 16:54:29 +00:00
David Howells ddb7d1e975 MN10300: Clear ASB2364 peripheral interrupt masks before enabling interrupts
Clear the interrupt mask registers of ASB2364 peripherals before enabling
interrupts so that any peripherals that weren't dealt with by the bootloader
after a reboot (if there was one) won't cause an interrupt storm when
interrupts are first enabled before the drivers are initialised.

Also, attempt to reset the peripherals attached to the FPGA.

Signed-off-by: David Howells <dhowells@redhat.com>
2011-03-18 16:52:54 +00:00
David Howells 02b2944cd7 MN10300: Fix the ASB2364 gdbport UART register defs
Fix the ASB2364 gdbport UART register definitions.  These registers are
actually 2 bytes apart, not 4 (which the ASB2303 and ASB2305 are).

Signed-off-by: David Howells <dhowells@redhat.com>
2011-03-18 16:52:54 +00:00
David Howells 5f91a1affc MN10300: Fix ASB2364 FPGA register defs
Fix the definition of the ASB2364 FPGA IRQ detect registers.  They accidentally
got defined to be the same as the mask registers when the patches were being
ported to the upstream kernel.

Signed-off-by: David Howells <dhowells@redhat.com>
2011-03-18 16:52:53 +00:00
Thomas Gleixner df43b86b41 MN10300: Select GENERIC_HARDIRQS_NO_DEPRECATED
All chips converted.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Howells <dhowells@redhat.com>
2011-03-18 16:52:53 +00:00
David Howells 4692edbd4c MN10300: Select HAVE_GENERIC_HARDIRQS rather than GENERIC_HARDIRQS
Select HAVE_GENERIC_HARDIRQS rather than GENERIC_HARDIRQS in MN10300's main
Kconfig file to avoid this warning:

warning: (MN10300) selects GENERIC_HARDIRQS which has unmet direct dependencies (HAVE_GENERIC_HARDIRQS)

Signed-off-by: David Howells <dhowells@redhat.com>
2011-03-18 16:52:53 +00:00
Thomas Gleixner 1ddc4a38ca MN10300: Convert ASB2364 FPGA irq_chip to new functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Howells <dhowells@redhat.com>
2011-03-18 16:52:52 +00:00
Thomas Gleixner 3ba65467f0 MN10300: Convert ipi irq_chip to new functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Howells <dhowells@redhat.com>
2011-03-18 16:52:52 +00:00
Thomas Gleixner b023ba598c MN10300: Convert serial irq_chip to new functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Howells <dhowells@redhat.com>
2011-03-18 16:52:52 +00:00
Thomas Gleixner 125bb1dbad MN10300: Convert cpu irq_chips to new functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Howells <dhowells@redhat.com>
2011-03-18 16:52:51 +00:00
Thomas Gleixner a494d3df1e MN10300: Remove unused mn10300_intc_* functions
No users.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Howells <dhowells@redhat.com>
2011-03-18 16:52:51 +00:00
Thomas Gleixner e61645a0aa MN10300: Remove stale irq_chip.end - V2
irq_chip.end is obsolete with the removal of __do_IRQ().

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Howells <dhowells@redhat.com>
2011-03-18 16:52:51 +00:00
Thomas Gleixner dc7daf3362 MN10300: Use clockevents_calc_mult_shift()
Use clockevents_calc_mult_shift() instead of the homebrewn function in
mn10300/kernel/time.c.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Mark Salter <msalter@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2011-03-18 16:52:50 +00:00
Thomas Gleixner 817890ba15 MN10300: Use clocksource_register_hz()
clocksource_register_hz() calculates the shift/mult pair for the
clocksource. Remove the mn10300 duplicate implementation.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Mark Salter <msalter@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2011-03-18 16:52:50 +00:00
Thomas Gleixner 73a173a411 MN10300: Remove stale code
mn10300 implements clocksource and clockevents and selects them
unconditionally in Kconfig. Remove the stale code which seems to be a
leftover of the conversion. Cleanup the configuration switches as well.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Mark Salter <msalter@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2011-03-18 16:52:49 +00:00
Linus Torvalds 79d8a8f736 Merge branch 'for-2.6.39' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
* 'for-2.6.39' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu, x86: Add arch-specific this_cpu_cmpxchg_double() support
  percpu: Generic support for this_cpu_cmpxchg_double()
  alpha: use L1_CACHE_BYTES for cacheline size in the linker script
  percpu: align percpu readmostly subsection to cacheline

Fix up trivial conflict in arch/x86/kernel/vmlinux.lds.S due to the
percpu alignment having changed ("x86: Reduce back the alignment of the
per-CPU data section")
2011-03-16 08:22:41 -07:00
Linus Torvalds 420c1c572d Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (62 commits)
  posix-clocks: Check write permissions in posix syscalls
  hrtimer: Remove empty hrtimer_init_hres_timer()
  hrtimer: Update hrtimer->state documentation
  hrtimer: Update base[CLOCK_BOOTTIME].offset correctly
  timers: Export CLOCK_BOOTTIME via the posix timers interface
  timers: Add CLOCK_BOOTTIME hrtimer base
  time: Extend get_xtime_and_monotonic_offset() to also return sleep
  time: Introduce get_monotonic_boottime and ktime_get_boottime
  hrtimers: extend hrtimer base code to handle more then 2 clockids
  ntp: Remove redundant and incorrect parameter check
  mn10300: Switch do_timer() to xtimer_update()
  posix clocks: Introduce dynamic clocks
  posix-timers: Cleanup namespace
  posix-timers: Add support for fd based clocks
  x86: Add clock_adjtime for x86
  posix-timers: Introduce a syscall for clock tuning.
  time: Splitout compat timex accessors
  ntp: Add ADJ_SETOFFSET mode bit
  time: Introduce timekeeping_inject_offset
  posix-timer: Update comment
  ...

Fix up new system-call-related conflicts in
	arch/x86/ia32/ia32entry.S
	arch/x86/include/asm/unistd_32.h
	arch/x86/include/asm/unistd_64.h
	arch/x86/kernel/syscall_table_32.S
(name_to_handle_at()/open_by_handle_at() vs clock_adjtime()), and some
due to movement of get_jiffies_64() in:
	kernel/time.c
2011-03-15 18:53:35 -07:00
David Howells af79420654 MN10300: atomic_read() should ensure it emits a load
atomic_read() needs to ensure that it emits a load (which it can do by using
ACCESS_ONCE()).

Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
2011-03-14 14:51:25 +00:00
David Howells dcca52c21e MN10300: The SMP_ICACHE_INV_FLUSH_RANGE IPI command does not exist
The invalidate-only versions of flush_icache_*range() are trying sending the
SMP_ICACHE_INV_FLUSH_RANGE IPI command in SMP kernels when they should be
sending SMP_ICACHE_INV_RANGE as the former does not exist.

Signed-off-by: David Howells <dhowells@redhat.com>
2011-03-14 14:45:29 +00:00
Tkhai Kirill 6fc34436be MN10300: Proper use of macros get_user() in the case of incremented pointers
Using __get_user_check(x, ptr++, size) leads to double increment of pointer.
This macro uses the macro get_user directly, which itself is used in this way
(get_user(x, ptr++)) in some functions of the kernel. The patch fixes the
error.

Reported-by: Tkhai Kirill <tkhai@yandex.ru>
Signed-off-by: David Howells <dhowells@redhat.com>
2011-03-14 14:44:30 +00:00
Torben Hohn 22b7fcdae5 mn10300: Switch do_timer() to xtimer_update()
Only one CPU gets the timer interrupt so mn10300_last_tsc does not
need to be protected by xtime lock. Remove xtime lovking and use
xtime_update() which does the locking itself.

Signed-off-by: Torben Hohn <torbenh@gmx.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
LKML-Reference: <20110127150011.23248.62040.stgit@localhost>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-09 16:17:24 +01:00
Tejun Heo 19df0c2fef percpu: align percpu readmostly subsection to cacheline
Currently percpu readmostly subsection may share cachelines with other
percpu subsections which may result in unnecessary cacheline bounce
and performance degradation.

This patch adds @cacheline parameter to PERCPU() and PERCPU_VADDR()
linker macros, makes each arch linker scripts specify its cacheline
size and use it to align percpu subsections.

This is based on Shaohua's x86 only patch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Shaohua Li <shaohua.li@intel.com>
2011-01-25 14:26:50 +01:00
Thomas Gleixner b169c908a5 mn10300: Use generic irq Kconfig
No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Howells <dhowells@redhat.com>
2011-01-21 11:55:33 +01:00
Thomas Gleixner 1c77ff22f5 genirq: Remove __do_IRQ
All architectures are finally converted. Remove the cruft.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Michal Simek <monstr@monstr.eu>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Jeff Dike <jdike@addtoit.com>
2011-01-21 11:55:31 +01:00
David Rientjes 6a108a14fa kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option
is used to configure any non-standard kernel with a much larger scope than
only small devices.

This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes
references to the option throughout the kernel.  A new CONFIG_EMBEDDED
option is added that automatically selects CONFIG_EXPERT when enabled and
can be used in the future to isolate options that should only be
considered for embedded systems (RISC architectures, SLOB, etc).

Calling the option "EXPERT" more accurately represents its intention: only
expert users who understand the impact of the configuration changes they
are making should enable it.

Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: David Woodhouse <david.woodhouse@intel.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robin Holt <holt@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20 17:02:05 -08:00
Amerigo Wang 351f8f8e64 kernel: clean up USE_GENERIC_SMP_HELPERS
For arch which needs USE_GENERIC_SMP_HELPERS, it has to select
USE_GENERIC_SMP_HELPERS, rather than leaving a choice to user, since they
don't provide their own implementions.

Also, move on_each_cpu() to kernel/smp.c, it is strange to put it in
kernel/softirq.c.

For arch which doesn't use USE_GENERIC_SMP_HELPERS, e.g.  blackfin, only
on_each_cpu() is compiled.

Signed-off-by: Amerigo Wang <amwang@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 08:03:08 -08:00
Stephen Hemminger 3e5c12409c set_rtc_mmss: show warning message only once
Occasionally the system gets into a state where the CMOS clock has gotten
slightly ahead of current time and the periodic update of RTC fails.  The
message is a nuisance and repeats spamming the log.

  See: http://www.ntp.org/ntpfaq/NTP-s-trbl-spec.htm#Q-LINUX-SET-RTC-MMSS

Rather than just removing the message, make it show only once and reduce
severity since it indicates a normal and non urgent condition.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 08:03:07 -08:00
Andrew Morton d9a1abe484 arch/mn10300/kernel/irq.c: fix build
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=25702

Reported-by: Martin Ettl <ettl.martin@gmx.de>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-03 16:36:33 -08:00
Nicolas Pitre b8da46d3d5 clarify a usage constraint for cnt32_to_63()
The cnt32_to_63 algorithm relies on proper counter data evaluation
ordering to work properly. This was missing from the provided
documentation.

Let's augment the documentation with the missing usage constraint and
fix the only instance that got it wrong.

Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-20 09:07:35 -08:00
David Howells 6142e05f30 MN10300: Fix interrupt mask alteration function call name in gdbstub
Fix the name of interrupt mask alteration function (ie the
local_change_intr_mask_level() fn) called in gdbstub to have an arch_
prefix to match the definition in asm/irqflags.h.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-07 11:29:14 -08:00
David Howells a9df42e117 MN10300: Implement asm/syscall.h
Implement asm/syscall.h for the MN10300 arch.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-03 09:18:53 -08:00
Arnd Bergmann 451a3c24b0 BKL: remove extraneous #include <smp_lock.h>
The big kernel lock has been removed from all these files at some point,
leaving only the #include.

Remove this too as a cleanup.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-17 08:59:32 -08:00
Linus Torvalds 51399a3919 Merge branch 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (38 commits)
  kbuild: convert `arch/tile' to the kconfig mainmenu upgrade
  README: cite nconfig
  Revert "kconfig: Temporarily disable dependency warnings"
  kconfig: Use PATH_MAX instead of 128 for path buffer sizes.
  kconfig: Fix realloc usage()
  kconfig: Propagate const
  kconfig: Don't go out from read config loop when you read new symbol
  kconfig: fix menuconfig on debian lenny
  kbuild: migrate all arch to the kconfig mainmenu upgrade
  kconfig: expand file names
  kconfig: use the file's name of sourced file
  kconfig: constify file name
  kconfig: don't emit warning upon rootmenu's prompt redefinition
  kconfig: replace KERNELVERSION usage by the mainmenu's prompt
  kconfig: delay gconf window initialization
  kconfig: expand by default the rootmenu's prompt
  kconfig: add a symbol string expansion helper
  kconfig: regen parser
  kconfig: implement the `mainmenu' directive
  kconfig: allow PACKAGE to be defined on the compiler's command-line
  ...

Fix up trivial conflict in arch/mn10300/Kconfig
2010-10-28 16:16:39 -07:00
Linus Torvalds bdab225015 Merge git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300
* git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300: (44 commits)
  MN10300: Save frame pointer in thread_info struct rather than global var
  MN10300: Change "Matsushita" to "Panasonic".
  MN10300: Create a defconfig for the ASB2364 board
  MN10300: Update the ASB2303 defconfig
  MN10300: ASB2364: Add support for SMSC911X and SMC911X
  MN10300: ASB2364: Handle the IRQ multiplexer in the FPGA
  MN10300: Generic time support
  MN10300: Specify an ELF HWCAP flag for MN10300 Atomic Operations Unit support
  MN10300: Map userspace atomic op regs as a vmalloc page
  MN10300: And Panasonic AM34 subarch and implement SMP
  MN10300: Delete idle_timestamp from irq_cpustat_t
  MN10300: Make various interrupt priority settings configurable
  MN10300: Optimise do_csum()
  MN10300: Implement atomic ops using atomic ops unit
  MN10300: Make the FPU operate in non-lazy mode under SMP
  MN10300: SMP TLB flushing
  MN10300: Use the [ID]PTEL2 registers rather than [ID]PTEL for TLB control
  MN10300: Make the use of PIDR to mark TLB entries controllable
  MN10300: Rename __flush_tlb*() to local_flush_tlb*()
  MN10300: AM34 erratum requires MMUCTR read and write on exception entry
  ...
2010-10-27 18:53:26 -07:00
Namhyung Kim 261bb92054 ptrace: cleanup arch_ptrace() on mn10300
Use new 'datap' variable in order to remove unnecessary castings.
Also remove checking @addr less than 0 because @addr is now unsigned.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:11 -07:00
Namhyung Kim 9b05a69e05 ptrace: change signature of arch_ptrace()
Fix up the arguments to arch_ptrace() to take account of the fact that
@addr and @data are now unsigned long rather than long as of a preceding
patch in this series.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: <linux-arch@vger.kernel.org>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:10 -07:00
Peter Zijlstra 20273941f2 mm: fix race in kunmap_atomic()
Christoph reported a nice splat which illustrated a race in the new stack
based kmap_atomic implementation.

The problem is that we pop our stack slot before we're completely done
resetting its state -- in particular clearing the PTE (sometimes that's
CONFIG_DEBUG_HIGHMEM).  If an interrupt happens before we actually clear
the PTE used for the last slot, that interrupt can reuse the slot in a
dirty state, which triggers a BUG in kmap_atomic().

Fix this by introducing kmap_atomic_idx() which reports the current slot
index without actually releasing it and use that to find the PTE and delay
the _pop() until after we're completely done.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reported-by: Christoph Hellwig <hch@infradead.org>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:05 -07:00
David Howells 7c7fcf762e MN10300: Save frame pointer in thread_info struct rather than global var
Save the current exception frame pointer in the thread_info struct rather than
in a global variable as the latter makes SMP tricky, especially when preemption
is also enabled.

This also replaces __frame with current_frame() and rearranges header file
inclusions to make it all compile.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
2010-10-27 17:29:01 +01:00
Akira Takeuchi a5e03ca2fd MN10300: Change "Matsushita" to "Panasonic".
Change externally visible "Matsushita" instances to "Panasonic" throughout the
MN10300 arch code.

Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:29:00 +01:00
Akira Takeuchi 72d36faffb MN10300: Create a defconfig for the ASB2364 board
Create a defconfig for the ASB2364 board.

Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:29:00 +01:00
Akira Takeuchi 711beda5cf MN10300: Update the ASB2303 defconfig
Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:59 +01:00
Akira Takeuchi 62747cd27e MN10300: ASB2364: Add support for SMSC911X and SMC911X
Add support for SMSC911X and SMC911X for the ASB2364 unit.

Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: steve.glendinning@smsc.com
cc: netdev@vger.kernel.org
2010-10-27 17:28:58 +01:00
David Howells 6044cf1d94 MN10300: ASB2364: Handle the IRQ multiplexer in the FPGA
Handle the IRQ multiplexer in the FPGA by implementing a cascade interrupt
driver for it.

Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:58 +01:00
Mark Salter 730c1fad0e MN10300: Generic time support
Implement generic time support for MN10300.

Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:57 +01:00
Mark Salter 2502c64eeb MN10300: Specify an ELF HWCAP flag for MN10300 Atomic Operations Unit support
Use an ELF HWCAP flag to indicate to the process that the CPU provides LL/SC
equivalent atomic operations unit support in addition to BSET/BCLR.

Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:56 +01:00
Mark Salter 5a226c6f5c MN10300: Map userspace atomic op regs as a vmalloc page
The AM34 processor has an atomic operation that's the equivalent of LL/SC on
other architectures.  However, rather than being done through a pair of
instructions, it's driven by writing to a pair of memory-mapped CPU control
registers.

One set of these registers (AARU/ADRU/ASRU) is available for use by userspace,
but for userspace to access them a PTE must be set up to cover the region.
This is done by dedicating the first vmalloc region page to this purpose,
setting the permissions on its PTE such that userspace can access the page.

glibc is hardcoded to expect the registers to be there.

The way atomic ops are done through these registers is straightforward:

 (1) Write the address of the word you wish to access into AARU.  This causes
     the CPU to go and fetch that word and load it into ADRU.  The status bits
     are also cleared in ASRU.

 (2) The current data value is read from the ADRU register and modified.

 (3) To alter the data in RAM, the revised data is written back to the ADRU
     register, which causes the CPU to attempt to write it back.

 (4) The ASRU.RW flag (ASRU read watch), ASRU.LW flag (bus lock watch),
     ASRU.IW (interrupt watch) and the ASRU.BW (bus error watch) flags then
     must be checked to confirm that the operation wasn't aborted.  If any of
     the watches have been set to true, the operation was aborted.

Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:56 +01:00
Akira Takeuchi 368dd5acd1 MN10300: And Panasonic AM34 subarch and implement SMP
Implement the Panasonic MN10300 AM34 CPU subarch and implement SMP support for
MN10300.  Also implement support for the MN2WS0060 processor and the ASB2364
evaluation board which are AM34 based.

Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:55 +01:00
Akira Takeuchi 04157a6e7d MN10300: Delete idle_timestamp from irq_cpustat_t
Delete idle_timestamp from irq_cpustat_t as it's an unread relic.

Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:54 +01:00
Akira Takeuchi 37e4ec9636 MN10300: Make various interrupt priority settings configurable
Make the settings of interrupt priorities used by various services configurable
at run time.

Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:54 +01:00
Akira Takeuchi ab244c1a08 MN10300: Optimise do_csum()
Optimise do_csum() to gang up the loads so they're less likely to get
interruptions between.

Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:53 +01:00
Mark Salter 4f81ca1353 MN10300: Implement atomic ops using atomic ops unit
Implement atomic ops using the atomic ops unit available in the AM34 CPU.  This
allows the equivalent of the LL/SC instructions to be found on other CPUs.

Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:52 +01:00
Akira Takeuchi 278d91c460 MN10300: Make the FPU operate in non-lazy mode under SMP
Make the FPU operate in non-lazy mode under SMP so that when the process that
is currently using the FPU migrates to a different CPU, we don't have to ping
its previous CPU to flush the FPU context.

Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:52 +01:00
Akira Takeuchi 965ea4bbb9 MN10300: SMP TLB flushing
Implement global TLB flushing for MN10300.  This will be used by the AM34 which
is SMP capable.

Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:51 +01:00
Akira Takeuchi dccbf4853a MN10300: Use the [ID]PTEL2 registers rather than [ID]PTEL for TLB control
Use the [ID]PTEL2 registers rather than [ID]PTEL for TLB control as the bits
are a more suitable layout.

Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:50 +01:00
Akira Takeuchi a9bc60ebfd MN10300: Make the use of PIDR to mark TLB entries controllable
Make controllable the use of the PIDR register to mark TLB entries as belonging
to particular processes.

Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:49 +01:00
David Howells 492e675116 MN10300: Rename __flush_tlb*() to local_flush_tlb*()
Rename __flush_tlb*() to local_flush_tlb*() as it's more appropriate, and ready
to differentiate local from global TLB flushes when SMP is introduced.

Whilst we're at it, get rid of __flush_tlb_global() and make
local_flush_tlb_page() take an mm_struct pointer rather than VMA pointer.

Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:49 +01:00
Akira Takeuchi 8f19e3daf3 MN10300: AM34 erratum requires MMUCTR read and write on exception entry
An AM34 erratum requires MMUCTR read and write on entry to certain exceptions,
prior to EPSW.NMID being cleared to allow NMIs to happen.

Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:48 +01:00
Akira Takeuchi 633171861a MN10300: Make the boot wrapper able to use writeback caching
Make the boot wrapper able to use writeback caching, including flushing the
cache before jumping to the main kernel.

Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:47 +01:00
Akira Takeuchi 8be0628923 MN10300: Cache: Implement SMP global cache flushing
Implement SMP global cache flushing for MN10300.  This will be used by the AM34
which is SMP capable.

Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:47 +01:00
David Howells b478491f26 MN10300: Allow some cacheflushes to be avoided if cache snooping is available
The AM34 core is able to do cache snooping, and so can skip some of the cache
flushing.

Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:46 +01:00
Akira Takeuchi 9731d23710 MN10300: AM34: Add cacheflushing by using the AM34 purge registers
The AM34 CPU core provides an automated way of purging the cache rather than
manually iterating over all the tags in the cache.  Make it possible to use
these.

Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:45 +01:00
Akira Takeuchi 0bd3eb6ca7 MN10300: SMP: Differentiate local cache flushing
Differentiate local cache flushing from global cache flushing so that they can
be done differently on SMP systems.

Rename the cache functions from:

	mn10300_[id]cache_*()

to:

	mn10300_[id]_localcache_*()

and on a UP system, assign the global labels to the local labels.

Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:45 +01:00
Akira Takeuchi 9b287bf992 MN10300: Cacheflush functions should take unsigned long addresses
The functions that perform cache flushing should take addresses of unsigned
long type, not unsigned int.

Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:44 +01:00
David Howells 518d4bb746 MN10300: AM34: The current cacheflush routines operate by controlling tag regs
The current cache flush and invalidate routines operate by controlling the
cache tag registers.  Rename the files and add config items to select them.

This makes it easier to support the use of other cache flush methods instead,
such as the use of AM34's area purge registers, if available.

Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:43 +01:00
David Howells 93c10d3d68 MN10300: Reorder asm/cacheflush.h to put primitives first
Reorder asm/cacheflush.h to put arch primitives first, before the main
functions so that the main functions can be inline asm rather than #defines
when non-trivial.

Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:43 +01:00
David Howells 344af921e6 MN10300: Provide a MN10300_CACHE_ENABLED config option
Provide a MN10300_CACHE_ENABLED config option as inverted logic of
MN10300_CACHE_DISABLED to make things simpler.

Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:42 +01:00
David Howells 0bc42d7fcb MN10300: Cache: Split cache bits out of arch Kconfig
Split the cache bits out of arch/mn10300/Kconfig as they're quite complex.

Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:41 +01:00
Akira Takeuchi 86c0f935c1 MN10300: Remove monitor/JTAG functions
Remove the monitor trap function and the set_jtag_stub function as they're not
really necessary.

Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:41 +01:00
Akira Takeuchi 8fbbf7c76a MN10300: Add CPU register bits for AM34
Add CPU register declarations for the AM34 subarch.

Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:40 +01:00
Akira Takeuchi 06019be31a MN10300: Don't hard code the cacheline size in register defs
Don't hard code the cacheline size in the cache control register definitions.

Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:39 +01:00
Akira Takeuchi a116956423 MN10300: Move DMA engine control reg defs to MN103E010 processor directory
Move the DMA engine control register definitions to the MN103E010 processor
directory so that the MN2WS0050 processor can have its own.

Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:39 +01:00
Akira Takeuchi 22d4225f61 MN10300: Differentiate AM33_2 and AM33_3 in config
Differentiate AM33_2 and AM33_3 CPU cores in configuration.  The MN103E010
processor contains an AM33_2 core.

Whilst we're at it, prepare for AM34-based stuff by declaring AM34_2 too.

Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:38 +01:00
Akira Takeuchi 9f200d3fed MN10300: Provide the functions to fully disable maskable interrupts
The local_irq_disable() function and co. merely raise the interrupt mask on the
MN10300 arch to exclude normal interrupts.  This still lets other, higher
priority maskable interrupts through, such as are used to service gdbstub's
serial port and the MN10300 on-chip serial port virtual FIFOs.

Provide functions to allow the maskable interrupts to be fully disabled, which
will exclude those interrupts.

Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:37 +01:00
Akira Takeuchi 9f59f7d23c MN10300: Add reads[bwl]() and writes[bwl]()
Add reads[bwl]() and writes[bwl]() for MN10300.

Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:37 +01:00
Akira Takeuchi 3195d0b564 MN10300: Don't cast away the volatile in test_bit()
Don't cast away the volatile in test_bit()'s parameter when we change its type
from const volatile void * so that we can dereference it.

Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:36 +01:00
David Howells 3b950de9c9 MN10300: Prevent cnt32_to_63() from being preempted in sched_clock()
Prevent cnt32_to_63() from being preempted in sched_clock() because it may
read its internal counter, get preempted, get delayed for more than the half
period of the 'TSC' and then write the internal counter, thus corrupting it.

Whilst some callers of sched_clock() have interrupts disabled or hold
spinlocks, not all do, and so preemption must be held here.

Note that sched_clock() is called from lockdep, but that shouldn't be a problem
because although preempt_disable() calls into lockdep, lockdep has a recursion
counter to deal with this.

Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:35 +01:00
David Howells dcd42ed3ea mn10300: Use pci_claim_resource
Instead of open-coding pci_find_parent_resource and request_resource,
just call pci_claim_resource.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:34 +01:00
Justin Chen e4acfcac0f bitops: Change the bitmap index from int to unsigned long [mn10300]
Change the index to unsigned long in all bitops for [mn10300]

Signed-off-by: Justin Chen <justin.chen@hp.com>
Reviewed-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:34 +01:00
Stoyan Gaydarov 292aa14127 MN10300: BUG to BUG_ON changes
Signed-off-by: Stoyan Gaydarov <stoyboyker@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:33 +01:00
Peter Zijlstra ece0e2b640 mm: remove pte_*map_nested()
Since we no longer need to provide KM_type, the whole pte_*map_nested()
API is now redundant, remove it.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Miller <davem@davemloft.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:08 -07:00
Peter Zijlstra 3e4d3af501 mm: stack based kmap_atomic()
Keep the current interface but ignore the KM_type and use a stack based
approach.

The advantage is that we get rid of crappy code like:

	#define __KM_PTE			\
		(in_nmi() ? KM_NMI_PTE : 	\
		 in_irq() ? KM_IRQ_PTE :	\
		 KM_PTE0)

and in general can stop worrying about what context we're in and what kmap
slots might be appropriate for that.

The downside is that FRV kmap_atomic() gets more expensive.

For now we use a CPP trick suggested by Andrew:

  #define kmap_atomic(page, args...) __kmap_atomic(page)

to avoid having to touch all kmap_atomic() users in a single patch.

[ not compiled on:
  - mn10300: the arch doesn't actually build with highmem to begin with ]

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix up drivers/gpu/drm/i915/intel_overlay.c]
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Miller <davem@davemloft.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:08 -07:00
David Howells 5260562754 MN10300: Fix the PERCPU() alignment to allow for workqueues
In the MN10300 arch, we occasionally see an assertion being tripped in
alloc_cwqs() at the following line:

        /* just in case, make sure it's actually aligned */
  --->  BUG_ON(!IS_ALIGNED(wq->cpu_wq.v, align));
        return wq->cpu_wq.v ? 0 : -ENOMEM;

The values are:

        wa->cpu_wq.v => 0x902776e0
        align => 0x100

and align is calculated by the following:

        const size_t align = max_t(size_t, 1 << WORK_STRUCT_FLAG_BITS,
                                   __alignof__(unsigned long long));

This is because the pointer in question (wq->cpu_wq.v) loses some of its
lower bits to control flags, and so the object it points to must be
sufficiently aligned to avoid the need to use those bits for pointing to
things.

Currently, 4 control bits and 4 colour bits are used in normal
circumstances, plus a debugging bit if debugging is set.  This requires
the cpu_workqueue_struct struct to be at least 256 bytes aligned (or 512
bytes aligned with debugging).

PERCPU() alignment on MN13000, however, is only 32 bytes as set in
vmlinux.lds.S.  So we set this to PAGE_SIZE (4096) to match most other
arches and stick a comment in alloc_cwqs() for anyone else who triggers
the assertion.

Reported-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Mark Salter <msalter@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-25 16:24:06 -07:00
Linus Torvalds 73ecf3a6e3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (49 commits)
  serial8250: ratelimit "too much work" error
  serial: bfin_sport_uart: speed up sport RX sample rate to be 3% faster
  serial: abstraction for 8250 legacy ports
  serial/imx: check that the buffer is non-empty before sending it out
  serial: mfd: add more baud rates support
  jsm: Remove the uart port on errors
  Alchemy: Add UART PM methods.
  8250: allow platforms to override PM hook.
  altera_uart: Don't use plain integer as NULL pointer
  altera_uart: Fix missing prototype for registering an early console
  altera_uart: Fixup type usage of port flags
  altera_uart: Make it possible to use Altera UART and 8250 ports together
  altera_uart: Add support for different address strides
  altera_uart: Add support for getting mapbase and IRQ from resources
  altera_uart: Add support for polling mode (IRQ-less)
  serial: Factor out uart_poll_timeout() from 8250 driver
  serial: mark the 8250 driver as maintained
  serial: 8250: Don't delay after transmitter is ready.
  tty: MAINTAINERS: add drivers/serial/jsm/ as maintained driver
  vcs: invoke the vt update callback when /dev/vcs* is written to
  ...
2010-10-22 19:59:04 -07:00
Jeff Mahoney 00c9c56f6b ioctl: Use asm-generic/ioctls.h on mn10300 (enables termiox)
This patch converts mn10300 to use asm-generic/ioctls.h instead of its
own version.

The differences between the arch-specific version and the generic
version are as follows:

- The generic version provides TIOCGRS485 and TIOCSRS485 but they
  are unused by any driver available for this architecture.
- The generic version adds support for termiox

Cc: David Howells <dhowells@redhat.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22 10:20:01 -07:00
Michal Marek 239060b93b Merge branch 'kbuild/rc-fixes' into kbuild/kconfig
We need to revert the temporary hack in 71ebc01, hence the merge.
2010-10-12 15:09:06 +02:00
David Howells df9ee29270 Fix IRQ flag handling naming
Fix the IRQ flag handling naming.  In linux/irqflags.h under one configuration,
it maps:

	local_irq_enable() -> raw_local_irq_enable()
	local_irq_disable() -> raw_local_irq_disable()
	local_irq_save() -> raw_local_irq_save()
	...

and under the other configuration, it maps:

	raw_local_irq_enable() -> local_irq_enable()
	raw_local_irq_disable() -> local_irq_disable()
	raw_local_irq_save() -> local_irq_save()
	...

This is quite confusing.  There should be one set of names expected of the
arch, and this should be wrapped to give another set of names that are expected
by users of this facility.

Change this to have the arch provide:

	flags = arch_local_save_flags()
	flags = arch_local_irq_save()
	arch_local_irq_restore(flags)
	arch_local_irq_disable()
	arch_local_irq_enable()
	arch_irqs_disabled_flags(flags)
	arch_irqs_disabled()
	arch_safe_halt()

Then linux/irqflags.h wraps these to provide:

	raw_local_save_flags(flags)
	raw_local_irq_save(flags)
	raw_local_irq_restore(flags)
	raw_local_irq_disable()
	raw_local_irq_enable()
	raw_irqs_disabled_flags(flags)
	raw_irqs_disabled()
	raw_safe_halt()

with type checking on the flags 'arguments', and then wraps those to provide:

	local_save_flags(flags)
	local_irq_save(flags)
	local_irq_restore(flags)
	local_irq_disable()
	local_irq_enable()
	irqs_disabled_flags(flags)
	irqs_disabled()
	safe_halt()

with tracing included if enabled.

The arch functions can now all be inline functions rather than some of them
having to be macros.

Signed-off-by: David Howells <dhowells@redhat.com> [X86, FRV, MN10300]
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [Tile]
Signed-off-by: Michal Simek <monstr@monstr.eu> [Microblaze]
Tested-by: Catalin Marinas <catalin.marinas@arm.com> [ARM]
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [AVR]
Acked-by: Tony Luck <tony.luck@intel.com> [IA-64]
Acked-by: Hirokazu Takata <takata@linux-m32r.org> [M32R]
Acked-by: Greg Ungerer <gerg@uclinux.org> [M68K/M68KNOMMU]
Acked-by: Ralf Baechle <ralf@linux-mips.org> [MIPS]
Acked-by: Kyle McMartin <kyle@mcmartin.ca> [PA-RISC]
Acked-by: Paul Mackerras <paulus@samba.org> [PowerPC]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [S390]
Acked-by: Chen Liqin <liqin.chen@sunplusct.com> [Score]
Acked-by: Matt Fleming <matt@console-pimps.org> [SH]
Acked-by: David S. Miller <davem@davemloft.net> [Sparc]
Acked-by: Chris Zankel <chris@zankel.net> [Xtensa]
Reviewed-by: Richard Henderson <rth@twiddle.net> [Alpha]
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> [H8300]
Cc: starvik@axis.com [CRIS]
Cc: jesper.nilsson@axis.com [CRIS]
Cc: linux-cris-kernel@axis.com
2010-10-07 14:08:55 +01:00
Linus Torvalds 5336377d62 modules: Fix module_bug_list list corruption race
With all the recent module loading cleanups, we've minimized the code
that sits under module_mutex, fixing various deadlocks and making it
possible to do most of the module loading in parallel.

However, that whole conversion totally missed the rather obscure code
that adds a new module to the list for BUG() handling.  That code was
doubly obscure because (a) the code itself lives in lib/bugs.c (for
dubious reasons) and (b) it gets called from the architecture-specific
"module_finalize()" rather than from generic code.

Calling it from arch-specific code makes no sense what-so-ever to begin
with, and is now actively wrong since that code isn't protected by the
module loading lock any more.

So this commit moves the "module_bug_{finalize,cleanup}()" calls away
from the arch-specific code, and into the generic code - and in the
process protects it with the module_mutex so that the list operations
are now safe.

Future fixups:
 - move the module list handling code into kernel/module.c where it
   belongs.
 - get rid of 'module_bug_list' and just use the regular list of modules
   (called 'modules' - imagine that) that we already create and maintain
   for other reasons.

Reported-and-tested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Adrian Bunk <bunk@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-05 11:29:27 -07:00
David Howells 57cf4f78c6 MN10300: Fix flush_icache_range()
flush_icache_range() is given virtual addresses to describe the region.  It
deals with these by attempting to translate them through the current set of
page tables.

This is fine for userspace memory and vmalloc()'d areas as they are governed by
page tables.  However, since the regions above 0x80000000 aren't translated
through the page tables by the MMU, the kernel doesn't bother to set up page
tables for them (see paging_init()).

This means flush_icache_range() as it stands cannot be used to flush regions of
the VM area between 0x80000000 and 0x9fffffff where the kernel resides if the
data cache is operating in WriteBack mode.

To fix this, make flush_icache_range() first check for addresses in the upper
half of VM space and deal with them appropriately, before dealing with any
range in the page table mapped area.

Ordinarily, this is not a problem, but it has the capacity to make kprobes and
kgdb malfunction.  It should not affect gdbstub, signal frame setup or module
loading as gdb has its own flush functions, and the others take place in the
page table mapped area only.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-01 15:01:47 -07:00
David Howells 62bdb288bf MN10300: Handle missing sys_cacheflush() when caching disabled
When caching is disabled on the MN10300 arch, the sys_cacheflush()
function is removed by conditional stuff in the makefiles, but is still
referred to by the syscall table.

Provide a null version that just returns 0 when caching is disabled (or
-EINVAL if the arguments are silly).

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-28 18:01:14 -07:00
David Howells 95929eff2c MN10300: Default config choice GDBSTUB_TTYSM0 should be GDBSTUB_ON_TTYSM0
The configuration choice for the port on which the GDB stub listens has
a default of GDBSTUB_TTYSM0, but this should be GDBSTUB_ON_TTYSM0 to
match the option.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-27 16:29:06 -07:00
Al Viro 60bdb72e3c mn10300: check __get_user/__put_user results...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-27 12:19:53 -07:00
Al Viro 8e87354d01 mn10300: get rid of set_fs(USER_DS) in sigframe setup
It really has no business being there; short of a serious kernel bug
we should already have USER_DS at that point.  It shouldn't have been
done on x86 either...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-27 12:19:53 -07:00
Al Viro c05628b49b mn10300: ->restart_block.fn needs to be reset on sigreturn
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-27 12:19:53 -07:00
Al Viro 00cbf6080c mn10300: prevent double syscall restarts
set ->orig_d0 to -1, same as what sigreturn does

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-27 12:19:53 -07:00
Al Viro e46924d246 mn10300: avoid SIGSEGV delivery loop
force_sigsegv() is there for purpose...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-27 12:19:53 -07:00
Mark Salter ed3473b18f MN10300: Arch doesn't support HAVE_ARCH_TRACEHOOK
Remove specification of HAVE_ARCH_TRACEHOOK for MN10300 as the arch does not
support it at this time.

Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-23 10:20:58 -07:00
Mark Salter a6ef9c8f16 MN10300: Fix SIGRTMAX
SIGRTMAX should be _NSIG not _NSIG-1.

Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-23 10:20:57 -07:00
Mark Salter fd429a0842 MN10300: Fix endianess of ext2 bitops
The MN10300 arch ext2 bitops assume a big-endian kernel, but the MN10300
arch only runs in little-endian mode.

Reported-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-23 09:12:21 -07:00
Arnaud Lacombe 838a2e55e6 kbuild: migrate all arch to the kconfig mainmenu upgrade
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Michal Marek <mmarek@suse.cz>
2010-09-19 22:54:11 -04:00
David Howells a4128b03ff MN10300: Fix up the IRQ names for the on-chip serial ports
Fix up the IRQ names for the MN10300 on-chip serial ports in the driver as
request_interrupt() no longer allows names containing slashes, giving a warning
like the following if one is encountered:

	------------[ cut here ]------------
	WARNING: at fs/proc/generic.c:323 __xlate_proc_name+0x62/0x7c()
	name 'ttySM0/Rx'

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-14 17:06:28 -07:00
Julia Lawall 6e0c64f4dd arch/mn10300/mm: eliminate NULL dereference
dev_name always dereferences its argument, so it should not be called if
the argument is NULL.  The function indeed later tests the argument for
being NULL.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

  // <smpl>
  @@
  expression dev,E;
  @@

  *dev_name(dev)
  ... when != dev = E
  (
  *dev == NULL
  |
  *dev != NULL
  )
  // </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-23 11:41:24 -07:00
David Howells d7627467b7 Make do_execve() take a const filename pointer
Make do_execve() take a const filename pointer so that kernel_execve() compiles
correctly on ARM:

arch/arm/kernel/sys_arm.c:88: warning: passing argument 1 of 'do_execve' discards qualifiers from pointer target type

This also requires the argv and envp arguments to be consted twice, once for
the pointer array and once for the strings the array points to.  This is
because do_execve() passes a pointer to the filename (now const) to
copy_strings_kernel().  A simpler alternative would be to cast the filename
pointer in do_execve() when it's passed to copy_strings_kernel().

do_execve() may not change any of the strings it is passed as part of the argv
or envp lists as they are some of them in .rodata, so marking these strings as
const should be fine.

Further kernel_execve() and sys_execve() need to be changed to match.

This has been test built on x86_64, frv, arm and mips.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-17 18:07:43 -07:00
Sam Ravnborg 8b1bb90701 defconfig reduction
Use the defconfig files generated by "make savedefconfig" for
remaining defconfig files.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2010-08-14 22:26:53 +02:00
David Howells c788732523 Mark arguments to certain syscalls as being const
Mark arguments to certain system calls as being const where they should be but
aren't.  The list includes:

 (*) The filename arguments of various stat syscalls, execve(), various utimes
     syscalls and some mount syscalls.

 (*) The filename arguments of some syscall helpers relating to the above.

 (*) The buffer argument of various write syscalls.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-13 16:53:13 -07:00
David Howells 95f4572737 MN10300: Use no_printk() for disabled gdbstub debugging functions
Use no_printk() for disabled gdbstub debugging functions to maintain side
effect checking.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12 09:51:35 -07:00
David Howells 12fdff3fc2 Add a dummy printk function for the maintenance of unused printks
Add a dummy printk function for the maintenance of unused printks through gcc
format checking, and also so that side-effect checking is maintained too.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12 09:51:35 -07:00
David Howells 1490cf5f0c MN10300: Don't try and #include <linux/slab.h> in lib/inflate.c from bootloader
Don't try and #include <linux/slab.h> in lib/inflate.c from the bootloader code
as linux/slab.h hauls in function defs that aren't available in the bootloader
code and may also haul in conflicting functions.

To fix this, make the inclusion of linux/slab.h contingent on NO_INFLATE_MALLOC
as are the usages of kmalloc() and kfree().

In MN10300, this causes the following errors:

In file included from include/linux/string.h:21,
                 from include/linux/bitmap.h:8,
                 from include/linux/nodemask.h:93,
                 from include/linux/mmzone.h:16,
                 from include/linux/gfp.h:4,
                 from include/linux/slab.h:12,
                 from arch/mn10300/boot/compressed/../../../../lib/inflate.c:106,
                 from arch/mn10300/boot/compressed/misc.c:170:
/warthog/am33/linux-2.6-mn10300/arch/mn10300/include/asm/string.h:19: error: conflicting types for 'memset'
arch/mn10300/boot/compressed/misc.c:59: error: previous definition of 'memset' was here

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12 09:51:35 -07:00
David Howells 3ad001c04f MN10300: Fix size_t and ssize_t
With the newer compilers, size_t and ssize_t are expected to be (un)signed int
rather than (un)signed long.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12 09:51:35 -07:00
David Howells 3557957616 MN10300: Fix RTC routines
A change to the RTC routines in the MN10300 arch used set_rtc_mms() when it
meant set_rtc_mmss().  This results in an error due to a reference of an
undefined symbol.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12 09:51:35 -07:00
FUJITA Tomonori 3b9c6c11f5 dma-mapping: remove dma_is_consistent API
Architectures implement dma_is_consistent() in different ways (some
misinterpret the definition of API in DMA-API.txt).  So it hasn't been so
useful for drivers.  We have only one user of the API in tree.  Unlikely
out-of-tree drivers use the API.

Even if we fix dma_is_consistent() in some architectures, it doesn't look
useful at all.  It was invented long ago for some old systems that can't
allocate coherent memory at all.  It's better to export only APIs that are
definitely necessary for drivers.

Let's remove this API.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:59:21 -07:00
FUJITA Tomonori 4565f0170d dma-mapping: unify dma_get_cache_alignment implementations
dma_get_cache_alignment returns the minimum DMA alignment.  Architectures
defines it as ARCH_DMA_MINALIGN (formally ARCH_KMALLOC_MINALIGN).  So we
can unify dma_get_cache_alignment implementations.

Note that some architectures implement dma_get_cache_alignment wrongly.
dma_get_cache_alignment() should return the minimum DMA alignment.  So
fully-coherent architectures should return 1.  This patch also fixes this
issue.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:59:21 -07:00
FUJITA Tomonori a6eb9fe105 dma-mapping: rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN
Now each architecture has the own dma_get_cache_alignment implementation.

dma_get_cache_alignment returns the minimum DMA alignment.  Architectures
define it as ARCH_KMALLOC_MINALIGN (it's used to make sure that malloc'ed
buffer is DMA-safe; the buffer doesn't share a cache with the others).  So
we can unify dma_get_cache_alignment implementations.

This patch:

dma_get_cache_alignment() needs to know if an architecture defines
ARCH_KMALLOC_MINALIGN or not (needs to know if architecture has DMA
alignment restriction).  However, slab.h define ARCH_KMALLOC_MINALIGN if
architectures doesn't define it.

Let's rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN.
ARCH_KMALLOC_MINALIGN is used only in the internals of slab/slob/slub
(except for crypto).

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:59:21 -07:00
Linus Torvalds 2f9e825d3e Merge branch 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block: (149 commits)
  block: make sure that REQ_* types are seen even with CONFIG_BLOCK=n
  xen-blkfront: fix missing out label
  blkdev: fix blkdev_issue_zeroout return value
  block: update request stacking methods to support discards
  block: fix missing export of blk_types.h
  writeback: fix bad _bh spinlock nesting
  drbd: revert "delay probes", feature is being re-implemented differently
  drbd: Initialize all members of sync_conf to their defaults [Bugz 315]
  drbd: Disable delay probes for the upcomming release
  writeback: cleanup bdi_register
  writeback: add new tracepoints
  writeback: remove unnecessary init_timer call
  writeback: optimize periodic bdi thread wakeups
  writeback: prevent unnecessary bdi threads wakeups
  writeback: move bdi threads exiting logic to the forker thread
  writeback: restructure bdi forker loop a little
  writeback: move last_active to bdi
  writeback: do not remove bdi from bdi_list
  writeback: simplify bdi code a little
  writeback: do not lose wake-ups in bdi threads
  ...

Fixed up pretty trivial conflicts in drivers/block/virtio_blk.c and
drivers/scsi/scsi_error.c as per Jens.
2010-08-10 15:22:42 -07:00
hyc@symas.com 26df6d1340 tty: Add EXTPROC support for LINEMODE
This patch is against the 2.6.34 source.

Paraphrased from the 1989 BSD patch by David Borman @ cray.com:

     These are the changes needed for the kernel to support
     LINEMODE in the server.

     There is a new bit in the termios local flag word, EXTPROC.
     When this bit is set, several aspects of the terminal driver
     are disabled.  Input line editing, character echo, and mapping
     of signals are all disabled.  This allows the telnetd to turn
     off these functions when in linemode, but still keep track of
     what state the user wants the terminal to be in.

     New ioctl:
         TIOCSIG         Generate a signal to processes in the
                         current process group of the pty.

     There is a new mode for packet driver, the TIOCPKT_IOCTL bit.
     When packet mode is turned on in the pty, and the EXTPROC bit
     is set, then whenever the state of the pty is changed, the
     next read on the master side of the pty will have the TIOCPKT_IOCTL
     bit set.  This allows the process on the server side of the pty
     to know when the state of the terminal has changed; it can then
     issue the appropriate ioctl to retrieve the new state.

Since the original BSD patches accompanied the source code for telnet
I've left that reference here, but obviously the feature is useful for
any remote terminal protocol, including ssh.

The corresponding feature has existed in the BSD tty driver since 1989.
For historical reference, a good copy of the relevant files can be found
here:

http://anonsvn.mit.edu/viewvc/krb5/trunk/src/appl/telnet/?pathrev=17741

Signed-off-by: Howard Chu <hyc@symas.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10 13:47:39 -07:00
Greg Kroah-Hartman a3c8ed693d tty: remove remaining Hayes ESP ioctls
As Jeff Dike pointed out, the Hayes ESP driver was removed in commit
f53a2ade0b, so these ioctl definitions
should also be removed.  This cleans up the remaining arch-specific
locations of this ioctl value.

Thanks to Arnd for pointing these out.

Cc: Jeff Dike <jdike@addtoit.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10 13:47:39 -07:00
Cesar Eduardo Barros 597781f3e5 kmap_atomic: make kunmap_atomic() harder to misuse
kunmap_atomic() is currently at level -4 on Rusty's "Hard To Misuse"
list[1] ("Follow common convention and you'll get it wrong"), except in
some architectures when CONFIG_DEBUG_HIGHMEM is set[2][3].

kunmap() takes a pointer to a struct page; kunmap_atomic(), however, takes
takes a pointer to within the page itself.  This seems to once in a while
trip people up (the convention they are following is the one from
kunmap()).

Make it much harder to misuse, by moving it to level 9 on Rusty's list[4]
("The compiler/linker won't let you get it wrong").  This is done by
refusing to build if the type of its first argument is a pointer to a
struct page.

The real kunmap_atomic() is renamed to kunmap_atomic_notypecheck()
(which is what you would call in case for some strange reason calling it
with a pointer to a struct page is not incorrect in your code).

The previous version of this patch was compile tested on x86-64.

[1] http://ozlabs.org/~rusty/index.cgi/tech/2008-04-01.html
[2] In these cases, it is at level 5, "Do it right or it will always
    break at runtime."
[3] At least mips and powerpc look very similar, and sparc also seems to
    share a common ancestor with both; there seems to be quite some
    degree of copy-and-paste coding here. The include/asm/highmem.h file
    for these three archs mention x86 CPUs at its top.
[4] http://ozlabs.org/~rusty/index.cgi/tech/2008-03-30.html
[5] As an aside, could someone tell me why mn10300 uses unsigned long as
    the first parameter of kunmap_atomic() instead of void *?

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Cc: Russell King <linux@arm.linux.org.uk> (arch/arm)
Cc: Ralf Baechle <ralf@linux-mips.org> (arch/mips)
Cc: David Howells <dhowells@redhat.com> (arch/frv, arch/mn10300)
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> (arch/mn10300)
Cc: Kyle McMartin <kyle@mcmartin.ca> (arch/parisc)
Cc: Helge Deller <deller@gmx.de> (arch/parisc)
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> (arch/parisc)
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> (arch/powerpc)
Cc: Paul Mackerras <paulus@samba.org> (arch/powerpc)
Cc: "David S. Miller" <davem@davemloft.net> (arch/sparc)
Cc: Thomas Gleixner <tglx@linutronix.de> (arch/x86)
Cc: Ingo Molnar <mingo@redhat.com> (arch/x86)
Cc: "H. Peter Anvin" <hpa@zytor.com> (arch/x86)
Cc: Arnd Bergmann <arnd@arndb.de> (include/asm-generic)
Cc: Rusty Russell <rusty@rustcorp.com.au> ("Hard To Misuse" list)
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09 20:44:54 -07:00
FUJITA Tomonori 7e005f7979 remove needless ISA_DMA_THRESHOLD
Architectures don't need to define ISA_DMA_THRESHOLD anymore.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: James Bottomley <James.Bottomley@suse.de>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:15:50 +02:00
Linus Torvalds b62ad9ab18 Merge branch 'timers-timekeeping-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-timekeeping-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  um: Fix read_persistent_clock fallout
  kgdb: Do not access xtime directly
  powerpc: Clean up obsolete code relating to decrementer and timebase
  powerpc: Rework VDSO gettimeofday to prevent time going backwards
  clocksource: Add __clocksource_updatefreq_hz/khz methods
  x86: Convert common clocksources to use clocksource_register_hz/khz
  timekeeping: Make xtime and wall_to_monotonic static
  hrtimer: Cleanup direct access to wall_to_monotonic
  um: Convert to use read_persistent_clock
  timkeeping: Fix update_vsyscall to provide wall_to_monotonic offset
  powerpc: Cleanup xtime usage
  powerpc: Simplify update_vsyscall
  time: Kill off CONFIG_GENERIC_TIME
  time: Implement timespec_add
  x86: Fix vtime/file timestamp inconsistencies

Trivial conflicts in Documentation/feature-removal-schedule.txt

Much less trivial conflicts in arch/powerpc/kernel/time.c resolved as
per Thomas' earlier merge commit 47916be4e2 ("Merge branch
'powerpc.cherry-picks' into timers/clocksource")
2010-08-06 13:18:29 -07:00
John Stultz 592913ecb8 time: Kill off CONFIG_GENERIC_TIME
Now that all arches have been converted over to use generic time via
clocksources or arch_gettimeoffset(), we can remove the GENERIC_TIME
config option and simplify the generic code.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
LKML-Reference: <1279068988-21864-4-git-send-email-johnstul@us.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-07-27 12:40:54 +02:00
Ingo Molnar 646b1db495 Merge commit 'v2.6.35-rc3' into perf/core
Merge reason: Go from -rc1 base to -rc3 base, merge in fixes.
2010-06-18 10:53:19 +02:00
Linus Torvalds eda054770e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: clear bridge resource range if BIOS assigned bad one
  PCI: hotplug/cpqphp, fix NULL dereference
  Revert "PCI: create function symlinks in /sys/bus/pci/slots/N/"
  PCI: change resource collision messages from KERN_ERR to KERN_INFO
2010-06-11 14:15:44 -07:00
Yinghai Lu 837c4ef13c PCI: clear bridge resource range if BIOS assigned bad one
Yannick found that video does not work with 2.6.34.  The cause of this
bug was that the BIOS had assigned the wrong range to the PCI bridge
above the video device.  Before 2.6.34 the kernel would have shrunk
the size of the bridge window, but since
  d65245c PCI: don't shrink bridge resources
the kernel will avoid shrinking BIOS ranges.

So zero out the old range if we fail to claim it at boot time; this will
cause us to allocate a new range at startup, restoring the 2.6.34
behavior.

Fixes regression https://bugzilla.kernel.org/show_bug.cgi?id=16009.

Reported-by: Yannick <yannick.roehlly@free.fr>
Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-06-11 13:24:51 -07:00
Peter Zijlstra 1996bda2a4 arch: Implement local64_t
On 64bit, local_t is of size long, and thus we make local64_t an alias.
On 32bit, we fall back to atomic64_t. (architecture can provide optimized
32-bit version)

(This new facility is to be used by perf events optimizations.)

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: linux-arch@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-06-09 11:12:36 +02:00
Nick Piggin c421b08ef5 mn10300: invoke oom-killer from page fault
As explained in commit 1c0fe6e3bd ("mm: invoke oom-killer from page
fault") , we want to call the architecture independent oom killer when
getting an unexplained OOM from handle_mm_fault, rather than simply
killing current.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-04 15:21:44 -07:00
FUJITA Tomonori 7676679f65 mn10300: use asm-generic/scatterlist.h
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: David Howells <dhowells@redhat.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:55 -07:00
FUJITA Tomonori 6cdafaae41 mn10300: set ARCH_KMALLOC_MINALIGN
Architectures that handle DMA-non-coherent memory need to set
ARCH_KMALLOC_MINALIGN to make sure that kmalloc'ed buffer is DMA-safe: the
buffer doesn't share a cache with the others.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 08:07:02 -07:00
Mathieu Desnoyers 3668316159 mn10300: use generic atomic.h
asm-generic/atomic.h has been derived from the mn10300 implementation.
Remove the now duplicated mn10300 implementation by including the generic
version instead.

This adds cmpxchg_local() and cmpxchg64_local() for free to the
architecture, as they are implemented in asm-generic/atomic.h.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Peter Fritzsche <peter.fritzsche@gmx.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jamie Lokier <jamie@shareable.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Keith M Wesolowski <wesolows@foobazco.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 08:07:02 -07:00
Linus Torvalds f39d01be4c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (44 commits)
  vlynq: make whole Kconfig-menu dependant on architecture
  add descriptive comment for TIF_MEMDIE task flag declaration.
  EEPROM: max6875: Header file cleanup
  EEPROM: 93cx6: Header file cleanup
  EEPROM: Header file cleanup
  agp: use NULL instead of 0 when pointer is needed
  rtc-v3020: make bitfield unsigned
  PCI: make bitfield unsigned
  jbd2: use NULL instead of 0 when pointer is needed
  cciss: fix shadows sparse warning
  doc: inode uses a mutex instead of a semaphore.
  uml: i386: Avoid redefinition of NR_syscalls
  fix "seperate" typos in comments
  cocbalt_lcdfb: correct sections
  doc: Change urls for sparse
  Powerpc: wii: Fix typo in comment
  i2o: cleanup some exit paths
  Documentation/: it's -> its where appropriate
  UML: Fix compiler warning due to missing task_struct declaration
  UML: add kernel.h include to signal.c
  ...
2010-05-20 09:20:59 -07:00
Linus Torvalds 7d02093e29 Merge branch 'timers-for-linus-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-for-linus-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  avr32: Fix typo in read_persistent_clock()
  sparc: Convert sparc to use read/update_persistent_clock
  cris: Convert cris to use read/update_persistent_clock
  m68k: Convert m68k to use read/update_persistent_clock
  m32r: Convert m32r to use read/update_peristent_clock
  blackfin: Convert blackfin to use read/update_persistent_clock
  ia64: Convert ia64 to use read/update_persistent_clock
  avr32: Convert avr32 to use read/update_persistent_clock
  h8300: Convert h8300 to use read/update_persistent_clock
  frv: Convert frv to use read/update_persistent_clock
  mn10300: Convert mn10300 to use read/update_persistent_clock
  alpha: Convert alpha to use read/update_persistent_clock
  xtensa: Fix unnecessary setting of xtime
  time: Clean up direct xtime usage in xen
2010-05-19 17:10:06 -07:00
Anton Blanchard f3d46f9d31 atomic_t: Cast to volatile when accessing atomic variables
In preparation for removing volatile from the atomic_t definition, this
patch adds a volatile cast to all the atomic read functions.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-17 07:57:27 -07:00
Andreas Dilger 0ddc9324b1 add descriptive comment for TIF_MEMDIE task flag declaration.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-14 11:13:27 +02:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
John Stultz f7a56575fa mn10300: Convert mn10300 to use read/update_persistent_clock
This patch converts the mn10300 architecture to use the generic
read_persistent_clock and update_persistent_clock interfaces, reducing
the amount of arch specific code we have to maintain, and allowing for
further cleanups in the future.

I have not built or tested this patch, so help from arch maintainers
would be appreciated.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <1267675049-12337-3-git-send-email-johnstul@us.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-03-13 01:14:09 +01:00
FUJITA Tomonori 06db881b4f dma-mapping: mn10300: remove the obsolete and unnecessary DMA API comments
pci_dma_sync_single was obsoleted long ago.

All the comments are generic, not architecture specific, simply describes
some of the DMA-API (and the same comments are in other files).
Documentation/DMA-API.txt have more detailed descriptions.

This removes the above obsolete and unnecessary DMA API
comments. Let's describe the DMA API in only
Documentation/DMA-API.txt.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: David Howells <dhowells@redhat.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12 15:52:42 -08:00
Christoph Hellwig dacbe41f77 ptrace: move user_enable_single_step & co prototypes to linux/ptrace.h
While in theory user_enable_single_step/user_disable_single_step/
user_enable_blockstep could also be provided as an inline or macro there's
no good reason to do so, and having the prototype in one places keeps code
size and confusion down.

Roland said:

  The original thought there was that user_enable_single_step() et al
  might well be only an instruction or three on a sane machine (as if we
  have any of those!), and since there is only one call site inlining
  would be beneficial.  But I agree that there is no strong reason to care
  about inlining it.

  As to the arch changes, there is only one thought I'd add to the
  record.  It was always my thinking that for an arch where
  PTRACE_SINGLESTEP does text-modifying breakpoint insertion,
  user_enable_single_step() should not be provided.  That is,
  arch_has_single_step()=>true means that there is an arch facility with
  "pure" semantics that does not have any unexpected side effects.
  Inserting a breakpoint might do very unexpected strange things in
  multi-threaded situations.  Aside from that, it is a peculiar side
  effect that user_{enable,disable}_single_step() should cause COW
  de-sharing of text pages and so forth.  For PTRACE_SINGLESTEP, all these
  peculiarities are the status quo ante for that arch, so having
  arch_ptrace() itself do those is one thing.  But for building other
  things in the future, it is nicer to have a uniform "pure" semantics
  that arch-independent code can expect.

  OTOH, all such arch issues are really up to the arch maintainer.  As
  of today, there is nothing but ptrace using user_enable_single_step() et
  al so it's a distinction without a practical difference.  If/when there
  are other facilities that use user_enable_single_step() and might care,
  the affected arch's can revisit the question when someone cares about
  the quality of the arch support for said new facility.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12 15:52:38 -08:00
Christoph Hellwig baed7fc9b5 Add generic sys_ipc wrapper
Add a generic implementation of the ipc demultiplexer syscall.  Except for
s390 and sparc64 all implementations of the sys_ipc are nearly identical.

There are slight differences in the types of the parameters, where mips
and powerpc as the only 64-bit architectures with sys_ipc use unsigned
long for the "third" argument as it gets casted to a pointer later, while
it traditionally is an "int" like most other paramters.  frv goes even
further and uses unsigned long for all parameters execept for "ptr" which
is a pointer type everywhere.  The change from int to unsigned long for
"third" and back to "int" for the others on frv should be fine due to the
in-register calling conventions for syscalls (we already had a similar
issue with the generic sys_ptrace), but I'd prefer to have the arch
maintainers looks over this in details.

Except for that h8300, m68k and m68knommu lack an impplementation of the
semtimedop sub call which this patch adds, and various architectures have
gets used - at least on i386 it seems superflous as the compat code on
x86-64 and ia64 doesn't even bother to implement it.

[akpm@linux-foundation.org: add sys_ipc to sys_ni.c]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Reviewed-by: H. Peter Anvin <hpa@zytor.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12 15:52:32 -08:00
Christoph Hellwig 5d0e52830e Add generic sys_old_select()
Add a generic implementation of the old select() syscall, which expects
its argument in a memory block and switch all architectures over to use
it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Reviewed-by: H. Peter Anvin <hpa@zytor.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: James Morris <jmorris@namei.org>
Acked-by: Andreas Schwab <schwab@linux-m68k.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12 15:52:32 -08:00
Linus Torvalds ac0f6f927d Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (100 commits)
  ARM: Eliminate decompressor -Dstatic= PIC hack
  ARM: 5958/1: ARM: U300: fix inverted clk round rate
  ARM: 5956/1: misplaced parentheses
  ARM: 5955/1: ep93xx: move timer defines into core.c and document
  ARM: 5954/1: ep93xx: move gpio interrupt support to gpio.c
  ARM: 5953/1: ep93xx: fix broken build of clock.c
  ARM: 5952/1: ARM: MM: Add ARM_L1_CACHE_SHIFT_6 for handle inside each ARCH Kconfig
  ARM: 5949/1: NUC900 add gpio virtual memory map
  ARM: 5948/1: Enable timer0 to time4 clock support for nuc910
  ARM: 5940/2: ARM: MMCI: remove custom DBG macro and printk
  ARM: make_coherent(): fix problems with highpte, part 2
  MM: Pass a PTE pointer to update_mmu_cache() rather than the PTE itself
  ARM: 5945/1: ep93xx: include correct irq.h in core.c
  ARM: 5933/1: amba-pl011: support hardware flow control
  ARM: 5930/1: Add PKMAP area description to memory.txt.
  ARM: 5929/1: Add checks to detect overlap of memory regions.
  ARM: 5928/1: Change type of VMALLOC_END to unsigned long.
  ARM: 5927/1: Make delimiters of DMA area globally visibly.
  ARM: 5926/1: Add "Virtual kernel memory..." printout.
  ARM: 5920/1: OMAP4: Enable L2 Cache
  ...

Fix up trivial conflict in arch/arm/mach-mx25/clock.c
2010-03-01 09:15:15 -08:00
Bjorn Helgaas 89a74ecccd PCI: add pci_bus_for_each_resource(), remove direct bus->resource[] refs
No functional change; this converts loops that iterate from 0 to
PCI_BUS_NUM_RESOURCES through pci_bus resource[] table to use the
pci_bus_for_each_resource() iterator instead.

This doesn't change the way resources are stored; it merely removes
dependencies on the fact that they're in a table.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-23 09:43:31 -08:00
Dominik Brodowski 3b7a17fcda resource/PCI: mark struct resource as const
Now that we return the new resource start position, there is no
need to update "struct resource" inside the align function.
Therefore, mark the struct resource as const.

Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:16:57 -08:00
Dominik Brodowski b26b2d494b resource/PCI: align functions now return start of resource
As suggested by Linus, align functions should return the start
of a resource, not void. An update of "res->start" is no longer
necessary.

Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:16:56 -08:00
Russell King 4b3073e1c5 MM: Pass a PTE pointer to update_mmu_cache() rather than the PTE itself
On VIVT ARM, when we have multiple shared mappings of the same file
in the same MM, we need to ensure that we have coherency across all
copies.  We do this via make_coherent() by making the pages
uncacheable.

This used to work fine, until we allowed highmem with highpte - we
now have a page table which is mapped as required, and is not available
for modification via update_mmu_cache().

Ralf Beache suggested getting rid of the PTE value passed to
update_mmu_cache():

  On MIPS update_mmu_cache() calls __update_tlb() which walks pagetables
  to construct a pointer to the pte again.  Passing a pte_t * is much
  more elegant.  Maybe we might even replace the pte argument with the
  pte_t?

Ben Herrenschmidt would also like the pte pointer for PowerPC:

  Passing the ptep in there is exactly what I want.  I want that
  -instead- of the PTE value, because I have issue on some ppc cases,
  for I$/D$ coherency, where set_pte_at() may decide to mask out the
  _PAGE_EXEC.

So, pass in the mapped page table pointer into update_mmu_cache(), and
remove the PTE value, updating all implementations and call sites to
suit.

Includes a fix from Stephen Rothwell:

  sparc: fix fallout from update_mmu_cache API change

  Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-20 16:41:46 +00:00
David Howells 598cace096 mn10300: update the ASB2303 defconfig
Update the defconfig for the ASB2303 platform.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-11 09:34:10 -08:00
David Howells 012c79bad5 mn10300: make the ASB2305's PCnet32 NIC work by using the PCI bridge's SRAM
Access to the ASB2305's PCnet32 NIC doesn't work correctly because when
the NIC attempts to update the ring buffer flags by DMA, the change to RAM
crops up about 17uS after the interrupt line is asserted.  This is almost
certainly due to a bug in the PCI bridge FPGA on that board.

We can get around this by making dma_alloc_coherent() put the ring buffer
in the SRAM attached to the PCI bridge rather than in the SDRAM.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-11 09:34:10 -08:00
David Howells 112b4a0bf1 mn10300: insert PCI root bus resources for the ASB2305 devel motherboard
Insert PCI root bus resources for the MN10300-based ASB2305 development
kit motherboard.  This is required because the CPU's window onto the PCI
bus address space is considerably smaller than the CPU's full address
space and non-PCI devices lie outside of the PCI window that we might want
to access.

Without this patch, the PCI root bus uses the platform-level bus
resources, and these are then confined to the PCI window, thus making
platform_device_add() reject devices outside of this window.

We also add a reservation for the PCI SRAM region.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-11 09:34:10 -08:00
Bjorn Helgaas 126cda5046 mn10300: use generic pci_enable_resources()
Use the generic pci_enable_resources() instead of the arch-specific code.

Unlike this arch-specific code, the generic version:

 - checks PCI_NUM_RESOURCES (11), not 6, resources
 - skips resources that have neither IORESOURCE_IO nor IORESOURCE_MEM set
 - skips ROM resources unless IORESOURCE_ROM_ENABLE is set
 - checks for resource collisions with "!r->parent"

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-11 09:34:10 -08:00
David Howells e716381f9f mn10300: use KERN_ERR not KERN_ERROR
Use KERN_ERR not KERN_ERROR in the ASB2305 platform code.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-11 09:34:10 -08:00
Al Viro 07c706a622 mn10300: fix several bogus includes on abs2305
asm/cpu never existed for mn10300; the files they are looking for are in
asm.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-11 09:34:10 -08:00
David Howells e5d20d0102 mn10300: wire up missing new syscalls
Wire up missing new system calls for MN10300.

Signed-off-by: David Howells <dhowelsl@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-11 09:34:10 -08:00
Mark Salter d6bb7a1ad3 mn10300: add cc clobbers to asm statements
gcc 4.2.1 for MN10300 is more agressive than the older gcc in
reordering/moving other insns between an insn that sets flags and an insn
that uses those flags.  This leads to trouble with asm statements which
are missing an explicit "cc" clobber.  This patch adds the explicit "cc"
clobber to asm statements which do indeed clobber the condition flags.

Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-11 09:34:10 -08:00
Mark Salter b0641e86fb mn10300: objcopy flags fix
The gcc-4.2.1 based toolchain for MN10300 adds some new note sections
which need to be stripped from the binary image.  This patch takes care of
that.

Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-11 09:34:09 -08:00
Mark Salter 4c03ee7352 mn10300: signal stack fix
This fixes a signal stack handling problem in the MN10300 arch.  When new
threads are cloned with CLONE_VM, they don't inherit the alternate signal
stack.  They do share the signal flags, though.  When deciding whether to
use an alternate stack, the arch code needs to check to make sure the task
struct contains a valid alternate stack.  This patch fixes the MN10300
arch by using the sas_ss_flags() test provided by sched.h rather than the
on_sig_stack() test which is insufficient by itself.

Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-11 09:34:07 -08:00
Andreas Fenkart 4b529401c5 mm: make totalhigh_pages unsigned long
Makes it consistent with the extern declaration, used when CONFIG_HIGHMEM
is set Removes redundant casts in printout messages

Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-11 09:34:03 -08:00
Linus Torvalds 5a865c0606 Merge branch 'for-33' of git://repo.or.cz/linux-kbuild
* 'for-33' of git://repo.or.cz/linux-kbuild: (29 commits)
  net: fix for utsrelease.h moving to generated
  gen_init_cpio: fixed fwrite warning
  kbuild: fix make clean after mismerge
  kbuild: generate modules.builtin
  genksyms: properly consider  EXPORT_UNUSED_SYMBOL{,_GPL}()
  score: add asm/asm-offsets.h wrapper
  unifdef: update to upstream revision 1.190
  kbuild: specify absolute paths for cscope
  kbuild: create include/generated in silentoldconfig
  scripts/package: deb-pkg: use fakeroot if available
  scripts/package: add KBUILD_PKG_ROOTCMD variable
  scripts/package: tar-pkg: use tar --owner=root
  Kbuild: clean up marker
  net: add net_tstamp.h to headers_install
  kbuild: move utsrelease.h to include/generated
  kbuild: move autoconf.h to include/generated
  drop explicit include of autoconf.h
  kbuild: move compile.h to include/generated
  kbuild: drop include/asm
  kbuild: do not check for include/asm-$ARCH
  ...

Fixed non-conflicting clean merge of modpost.c as per comments from
Stephen Rothwell (modpost.c had grown an include of linux/autoconf.h
that needed to be changed to generated/autoconf.h)
2009-12-17 07:23:42 -08:00
Christoph Hellwig 698ba7b5a3 elf: kill USE_ELF_CORE_DUMP
Currently all architectures but microblaze unconditionally define
USE_ELF_CORE_DUMP.  The microblaze omission seems like an error to me, so
let's kill this ifdef and make sure we are the same everywhere.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: <linux-arch@vger.kernel.org>
Cc: Michal Simek <michal.simek@petalogix.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 07:20:12 -08:00
Thomas Gleixner 239007b844 genirq: Convert irq_desc.lock to raw_spinlock
Convert locks which cannot be sleeping locks in preempt-rt to
raw_spinlocks.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
2009-12-14 23:55:33 +01:00
Linus Torvalds d0316554d3 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (34 commits)
  m68k: rename global variable vmalloc_end to m68k_vmalloc_end
  percpu: add missing per_cpu_ptr_to_phys() definition for UP
  percpu: Fix kdump failure if booted with percpu_alloc=page
  percpu: make misc percpu symbols unique
  percpu: make percpu symbols in ia64 unique
  percpu: make percpu symbols in powerpc unique
  percpu: make percpu symbols in x86 unique
  percpu: make percpu symbols in xen unique
  percpu: make percpu symbols in cpufreq unique
  percpu: make percpu symbols in oprofile unique
  percpu: make percpu symbols in tracer unique
  percpu: make percpu symbols under kernel/ and mm/ unique
  percpu: remove some sparse warnings
  percpu: make alloc_percpu() handle array types
  vmalloc: fix use of non-existent percpu variable in put_cpu_var()
  this_cpu: Use this_cpu_xx in trace_functions_graph.c
  this_cpu: Use this_cpu_xx for ftrace
  this_cpu: Use this_cpu_xx in nmi handling
  this_cpu: Use this_cpu operations in RCU
  this_cpu: Use this_cpu ops for VM statistics
  ...

Fix up trivial (famous last words) global per-cpu naming conflicts in
	arch/x86/kvm/svm.c
	mm/slab.c
2009-12-14 09:58:24 -08:00
Sam Ravnborg 559df2e021 kbuild: move asm-offsets.h to include/generated
The simplest method was to add an extra asm-offsets.h
file in arch/$ARCH/include/asm that references the generated file.

We can now migrate the architectures one-by-one to reference
the generated file direct - and when done we can delete the
temporary arch/$ARCH/include/asm/asm-offsets.h file.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-12-12 13:08:14 +01:00
Al Viro f8b7256096 Unify sys_mmap*
New helper - sys_mmap_pgoff(); switch syscalls to using it.

Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-11 06:44:29 -05:00
Al Viro 564b3bffc6 arch_mmap_check() on mn10300
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-11 06:34:10 -05:00
Linus Torvalds 2588465bad Merge branch 'bkl-arch-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'bkl-arch-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  mn10300: Remove the BKL from sys_execve
  m68knommu: Remove the BKL from sys_execve
  m68k: Remove the BKL from sys_execve
  h83000: Remove BKL from sys_execve
  frv: Remove the BKL from sys_execve
  blackfin: Remove the BKL from sys_execve
  um: Remove BKL from mmapper
  um: Remove BKL from random
  s390: Remove BKL from prng
2009-12-09 08:07:51 -08:00
Linus Torvalds 6035ccd8e9 Merge branch 'for-2.6.33' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.33' of git://git.kernel.dk/linux-2.6-block: (113 commits)
  cfq-iosched: Do not access cfqq after freeing it
  block: include linux/err.h to use ERR_PTR
  cfq-iosched: use call_rcu() instead of doing grace period stall on queue exit
  blkio: Allow CFQ group IO scheduling even when CFQ is a module
  blkio: Implement dynamic io controlling policy registration
  blkio: Export some symbols from blkio as its user CFQ can be a module
  block: Fix io_context leak after failure of clone with CLONE_IO
  block: Fix io_context leak after clone with CLONE_IO
  cfq-iosched: make nonrot check logic consistent
  io controller: quick fix for blk-cgroup and modular CFQ
  cfq-iosched: move IO controller declerations to a header file
  cfq-iosched: fix compile problem with !CONFIG_CGROUP
  blkio: Documentation
  blkio: Wait on sync-noidle queue even if rq_noidle = 1
  blkio: Implement group_isolation tunable
  blkio: Determine async workload length based on total number of queues
  blkio: Wait for cfq queue to get backlogged if group is empty
  blkio: Propagate cgroup weight updation to cfq groups
  blkio: Drop the reference to queue once the task changes cgroup
  blkio: Provide some isolation between groups
  ...
2009-12-08 08:19:16 -08:00
Ilya Loginov 2d4dc890b5 block: add helpers to run flush_dcache_page() against a bio and a request's pages
Mtdblock driver doesn't call flush_dcache_page for pages in request.  So,
this causes problems on architectures where the icache doesn't fill from
the dcache or with dcache aliases.  The patch fixes this.

The ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE symbol was introduced to avoid
pointless empty cache-thrashing loops on architectures for which
flush_dcache_page() is a no-op.  Every architecture was provided with this
flush pages on architectires where ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE is
equal 1 or do nothing otherwise.

See "fix mtd_blkdevs problem with caches on some architectures" discussion
on LKML for more information.

Signed-off-by: Ilya Loginov <isloginov@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Peter Horton <phorton@bitbox.co.uk>
Cc: "Ed L. Cashin" <ecashin@coraid.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-26 09:16:19 +01:00
Tejun Heo 390dfd95c5 percpu: make misc percpu symbols unique
This patch updates misc percpu related symbols such that percpu
symbols are unique and don't clash with local symbols.  This serves
two purposes of decreasing the possibility of global percpu symbol
collision and allowing dropping per_cpu__ prefix from percpu symbols.

* drivers/crypto/padlock-aes.c: s/last_cword/paes_last_cword/

* drivers/lguest/x86/core.c: s/last_cpu/lg_last_cpu/

* drivers/s390/net/netiucv.c: rename the variable used in a macro to
  avoid clashing with percpu symbol

* arch/mn10300/kernel/kprobes.c: replace current_ prefix with cur_ for
  static variables.  Please note that percpu symbol current_kprobe
  can't be changed as it's used by generic code.

Partly based on Rusty Russell's "alloc_percpu: rename percpu vars
which cause name clashes" patch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Chuck Ebbert <cebbert@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux390@de.ibm.com
2009-10-29 22:34:14 +09:00
John Kacur 8c0daee204 mn10300: Remove the BKL from sys_execve
This looks like a cut-and-paste from functionality that no-longer
needs the bkl Just remove it. Also, rewrite slightly so that it looks
closer to sys_execve on other architectures.

Signed-off-by: John Kacur <jkacur@redhat.com>
Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
LKML-Reference: <alpine.LFD.2.00.0910130016540.3658@localhost.localdomain>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-10-14 17:18:15 +02:00
Neil Horman 3b885787ea net: Generalize socket rx gap / receive queue overflow cmsg
Create a new socket level option to report number of queue overflows

Recently I augmented the AF_PACKET protocol to report the number of frames lost
on the socket receive queue between any two enqueued frames.  This value was
exported via a SOL_PACKET level cmsg.  AFter I completed that work it was
requested that this feature be generalized so that any datagram oriented socket
could make use of this option.  As such I've created this patch, It creates a
new SOL_SOCKET level option called SO_RXQ_OVFL, which when enabled exports a
SOL_SOCKET level cmsg that reports the nubmer of times the sk_receive_queue
overflowed between any two given frames.  It also augments the AF_PACKET
protocol to take advantage of this new feature (as it previously did not touch
sk->sk_drops, which this patch uses to record the overflow count).  Tested
successfully by me.

Notes:

1) Unlike my previous patch, this patch simply records the sk_drops value, which
is not a number of drops between packets, but rather a total number of drops.
Deltas must be computed in user space.

2) While this patch currently works with datagram oriented protocols, it will
also be accepted by non-datagram oriented protocols. I'm not sure if thats
agreeable to everyone, but my argument in favor of doing so is that, for those
protocols which aren't applicable to this option, sk_drops will always be zero,
and reporting no drops on a receive queue that isn't used for those
non-participating protocols seems reasonable to me.  This also saves us having
to code in a per-protocol opt in mechanism.

3) This applies cleanly to net-next assuming that commit
977750076d (my af packet cmsg patch) is reverted

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-12 13:26:31 -07:00
Mark Salter d22a001bf6 mn10300: fix kernel build failures when using gcc-4.x
Fix some build failures when using gcc-4.x for MN10300.

Firstly, __get_user() fails to build because the pointer points to a const and
__gu_val ends up being read-only:

In file included from include/linux/mempolicy.h:62,
                 from init/main.c:50:
include/linux/pagemap.h: In function 'fault_in_pages_readable':
include/linux/pagemap.h:394: error: read-only variable '__gu_val' used as 'asm' output
include/linux/pagemap.h:394: error: read-only variable '__gu_val' used as 'asm' output
include/linux/pagemap.h:394: error: read-only variable '__gu_val' used as 'asm' output
include/linux/pagemap.h:400: error: read-only variable '__gu_val' used as 'asm' output
include/linux/pagemap.h:400: error: read-only variable '__gu_val' used as 'asm' output
include/linux/pagemap.h:400: error: read-only variable '__gu_val' used as 'asm' output
make[1]: *** [init/main.o] Error 1

Secondly, gcc-4 doesn't allow casts of lvalues:

  UPD     include/linux/compile.h
arch/mn10300/kernel/rtc.c: In function 'calibrate_clock':
arch/mn10300/kernel/rtc.c:170: error: lvalue required as left operand of assignment
arch/mn10300/kernel/rtc.c:172: error: lvalue required as left operand of assignment
make[1]: *** [arch/mn10300/kernel/rtc.o] Error 1

These are seen with gcc 4.2.1.

Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-01 16:11:12 -07:00
Tim Abbott 4295f8b318 mn10300: Clean up linker script using higher-level macros.
Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 17:16:22 -07:00
Linus Torvalds 94a8d5caba Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: (39 commits)
  cpumask: Move deprecated functions to end of header.
  cpumask: remove unused deprecated functions, avoid accusations of insanity
  cpumask: use new-style cpumask ops in mm/quicklist.
  cpumask: use mm_cpumask() wrapper: x86
  cpumask: use mm_cpumask() wrapper: um
  cpumask: use mm_cpumask() wrapper: mips
  cpumask: use mm_cpumask() wrapper: mn10300
  cpumask: use mm_cpumask() wrapper: m32r
  cpumask: use mm_cpumask() wrapper: arm
  cpumask: Use accessors for cpu_*_mask: um
  cpumask: Use accessors for cpu_*_mask: powerpc
  cpumask: Use accessors for cpu_*_mask: mips
  cpumask: Use accessors for cpu_*_mask: m32r
  cpumask: remove arch_send_call_function_ipi
  cpumask: arch_send_call_function_ipi_mask: s390
  cpumask: arch_send_call_function_ipi_mask: powerpc
  cpumask: arch_send_call_function_ipi_mask: mips
  cpumask: arch_send_call_function_ipi_mask: m32r
  cpumask: arch_send_call_function_ipi_mask: alpha
  cpumask: remove obsolete topology_core_siblings and topology_thread_siblings: ia64
  ...
2009-09-23 18:14:11 -07:00
Alexey Dobriyan 2bcd57ab61 headers: utsname.h redux
* remove asm/atomic.h inclusion from linux/utsname.h --
   not needed after kref conversion
 * remove linux/utsname.h inclusion from files which do not need it

NOTE: it looks like fs/binfmt_elf.c do not need utsname.h, however
due to some personality stuff it _is_ needed -- cowardly leave ELF-related
headers and files alone.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 18:13:10 -07:00
Rusty Russell 7ce1df49e1 cpumask: use mm_cpumask() wrapper: mn10300
Makes code futureproof against the impending change to mm->cpu_vm_mask
(to be a pointer).

It's also a chance to use the new cpumask_ ops which take a pointer
(the older ones are deprecated, but there's no hurry for arch code).

Also change the actual arg name here to "mm" (which it is), not "task".

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-09-24 09:34:50 +09:30
Linus Torvalds c37efa9325 Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next: (30 commits)
  Use macros for .data.page_aligned section.
  Use macros for .bss.page_aligned section.
  Use new __init_task_data macro in arch init_task.c files.
  kbuild: Don't define ALIGN and ENTRY when preprocessing linker scripts.
  arm, cris, mips, sparc, powerpc, um, xtensa: fix build with bash 4.0
  kbuild: add static to prototypes
  kbuild: fail build if recordmcount.pl fails
  kbuild: set -fconserve-stack option for gcc 4.5
  kbuild: echo the record_mcount command
  gconfig: disable "typeahead find" search in treeviews
  kbuild: fix cc1 options check to ensure we do not use -fPIC when compiling
  checkincludes.pl: add option to remove duplicates in place
  markup_oops: use modinfo to avoid confusion with underscored module names
  checkincludes.pl: provide usage helper
  checkincludes.pl: close file as soon as we're done with it
  ctags: usability fix
  kernel hacking: move STRIP_ASM_SYMS from General
  gitignore usr/initramfs_data.cpio.bz2 and usr/initramfs_data.cpio.lzma
  kbuild: Check if linker supports the -X option
  kbuild: introduce ld-option
  ...

Fix trivial conflict in scripts/basic/fixdep.c
2009-09-23 15:37:02 -07:00
David Howells 7043078630 MN10300: Handle removal of struct uart_info
Commit ebd2c8f6d2 removed struct uart_info and
commit bdc04e3174 further moved delta_msr_wait.
Fix up the MN10300 on-chip serial port drivers to comply with this.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 10:15:21 -07:00
Rusty Russell cf63ff5fa4 misc: remove redundant start_kernel prototypes
Impact: cleanup

No need for redeclaration.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 10:05:22 -07:00
James Morris 88e9d34c72 seq_file: constify seq_operations
Make all seq_operations structs const, to help mitigate against
revectoring user-triggerable function pointers.

This is derived from the grsecurity patch, although generated from scratch
because it's simpler than extracting the changes from there.

Signed-off-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 07:39:29 -07:00
Linus Torvalds 342ff1a1b5 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
  trivial: fix typo in aic7xxx comment
  trivial: fix comment typo in drivers/ata/pata_hpt37x.c
  trivial: typo in kernel-parameters.txt
  trivial: fix typo in tracing documentation
  trivial: add __init/__exit macros in drivers/gpio/bt8xxgpio.c
  trivial: add __init macro/ fix of __exit macro location in ipmi_poweroff.c
  trivial: remove unnecessary semicolons
  trivial: Fix duplicated word "options" in comment
  trivial: kbuild: remove extraneous blank line after declaration of usage()
  trivial: improve help text for mm debug config options
  trivial: doc: hpfall: accept disk device to unload as argument
  trivial: doc: hpfall: reduce risk that hpfall can do harm
  trivial: SubmittingPatches: Fix reference to renumbered step
  trivial: fix typos "man[ae]g?ment" -> "management"
  trivial: media/video/cx88: add __init/__exit macros to cx88 drivers
  trivial: fix typo in CONFIG_DEBUG_FS in gcov doc
  trivial: fix missing printk space in amd_k7_smp_check
  trivial: fix typo s/ketymap/keymap/ in comment
  trivial: fix typo "to to" in multiple files
  trivial: fix typos in comments s/DGBU/DBGU/
  ...
2009-09-22 07:51:45 -07:00
Arnd Bergmann 6e17b17f1f mm: remove duplicate asm/mman.h files
A number of architectures have identical asm/mman.h files so they can all
be merged by using the new generic file.

The remaining asm/mman.h files are substantially different from each
other.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:42 -07:00
Arnd Bergmann 90f72aa58b mm: add MAP_HUGETLB for mmaping pseudo-anonymous huge page regions
Add a flag for mmap that will be used to request a huge page region that
will look like anonymous memory to user space.  This is accomplished by
using a file on the internal vfsmount.  MAP_HUGETLB is a modifier of
MAP_ANONYMOUS and so must be specified with it.  The region will behave
the same as a MAP_ANONYMOUS region using small pages.

The patch also adds the MAP_STACK flag, which was previously defined only
on some architectures but not on others.  Since MAP_STACK is meant to be a
hint only, architectures can define it without assigning a specific
meaning to it.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Eric B Munson <ebmunson@us.ibm.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: David Rientjes <rientjes@google.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:41 -07:00
Geert Uytterhoeven cc013a8890 arches: drop superfluous casts in nr_free_pages() callers
Commit 9617729941 ("Drop free_pages()")
modified nr_free_pages() to return 'unsigned long' instead of 'unsigned
int'.  This made the casts to 'unsigned long' in most callers superfluous,
so remove them.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Howells <dhowells@redhat.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Chris Zankel <zankel@tensilica.com>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:34 -07:00