Define helpers to initialize window context registers of the VAS
hardware. These will be used in follow-on patches when opening/closing
VAS windows.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Define some helper functions to access the MMIO regions. We use these
in follow-on patches to read/write VAS hardware registers. They are
also used to later issue 'paste' instructions to submit requests to
the NX hardware engines.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Implement vas_init() and vas_exit() functions for a new VAS module.
This VAS module is essentially a library for other device drivers
and kernel users of the NX coprocessors like NX-842 and NX-GZIP.
In the future this will be extended to add support for user space
to access the NX coprocessors.
VAS is currently only supported with 64K page size.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Define macros for the VAS hardware registers and bit-fields as well
as couple of data structures needed by the VAS driver.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
[mpe: Fixup include guard to use _ASM_POWERPC_VAS_H]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The check_req() helper uses pci_get_pdn() to get an OF node pointer.
pci_get_pdn() returns a pci_dn pointer which either:
1) from the OF node returned by pci_device_to_OF_node();
2) from the parent child_list where entries don't have OF node pointers.
Since check_req() does not care about 2), it can call
pci_device_to_OF_node() directly, hence the change.
The find_pe_dn() helper uses embedded pci_dn to get an OF node which is
also stored in edev->pdev so let's take a shortcut and call
pci_device_to_OF_node() directly.
With these 2 changes, we can finally get rid of the OF node back pointer.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The eeh_dev struct hold a config space address of an associated node
and the very same address is also stored in the pci_dn struct which
is always present during the eeh_dev lifetime.
This uses bus:devfn directly from pci_dn instead of cached and packed
config_addr.
Since config_addr is made from device's bus:dev.fn, there is no point
in keeping it in the debugfs either so remove that too.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The eeh_dev struct already holds a pointer to pci_dn which it does not
exist without and pci_dn itself holds the very same pointer so just
use it.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
arch/powerpc/kernel/eeh_dev.c:57 is the only legit place where edev
is allocated; other 2 places allocate it on stack and in the heap for
a very short period of time to use eeh_pe_get() as takes edev.
This changes eeh_pe_get() to receive required parameters explicitly.
This removes unnecessary temporary allocation of edev.
This uses the "pe_no" name instead of the "pe_config_addr" name as
it actually is a PE number and not a config space address as it seemed.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
clk_div_tables are not supposed to change at runtime.
mpc512x_clk_divtable function working with const clk_div_table. So
mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There is a cut and paste error here so we use sizeof(struct mpc83xx_pmc)
to remap the memory for "clock_regs". That sizeof() is 20 bytes and we
only need to remap 12 bytes. It presumably doesn't affect run time too
much...
I changed them to both use sizeof(*variable_name) because that's the
preferred kernel style these days.
Fixes: d49747bdfb ("powerpc/mpc83xx: Power Management support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[mpe: It will map at least one page anyway, but still a good cleanup]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There are quite a few machine check exceptions that can be caused by
kernel bugs. To make debugging easier, use the kernel crash path in
cases of synchronous machine checks that occur in kernel mode, if that
would not result in the machine going straight to panic or crash dump.
There is a downside here that die()ing the process in kernel mode can
still leave the system unstable. panic_on_oops will always force the
system to fail-stop, so systems where that behaviour is important will
still do the right thing.
As a test, when triggering an i-side 0111b error (ifetch from foreign
address) in kernel mode process context on POWER9, the kernel currently
dies quickly like this:
Severe Machine check interrupt [Not recovered]
NIP [ffff000000000000]: 0xffff000000000000
Initiator: CPU
Error type: Real address [Instruction fetch (foreign)]
[ 127.426651616,0] OPAL: Reboot requested due to Platform error.
Effective[ 127.426693712,3] OPAL: Reboot requested due to Platform error. address: ffff000000000000
opal: Reboot type 1 not supported
Kernel panic - not syncing: PowerNV Unrecovered Machine Check
CPU: 56 PID: 4425 Comm: syscall Tainted: G M 4.12.0-rc1-13857-ga4700a261072-dirty #35
Call Trace:
[ 128.017988928,4] IPMI: BUG: Dropping ESEL on the floor due to
buggy/mising code in OPAL for this BMC
Rebooting in 10 seconds..
Trying to free IRQ 496 from IRQ context!
After this patch, the process is killed and the kernel continues with
this message, which gives enough information to identify the offending
branch (i.e., with CFAR):
Severe Machine check interrupt [Not recovered]
NIP [ffff000000000000]: 0xffff000000000000
Initiator: CPU
Error type: Real address [Instruction fetch (foreign)]
Effective address: ffff000000000000
Oops: Machine check, sig: 7 [#1]
SMP NR_CPUS=2048
NUMA
PowerNV
Modules linked in: iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 ...
CPU: 22 PID: 4436 Comm: syscall Tainted: G M 4.12.0-rc1-13857-ga4700a261072-dirty #36
task: c000000932300000 task.stack: c000000932380000
NIP: ffff000000000000 LR: 00000000217706a4 CTR: ffff000000000000
REGS: c00000000fc8fd80 TRAP: 0200 Tainted: G M (4.12.0-rc1-13857-ga4700a261072-dirty)
MSR: 90000000001c1003 <SF,HV,ME,RI,LE>
CR: 24000484 XER: 20000000
CFAR: c000000000004c80 DAR: 0000000021770a90 DSISR: 0a000000 SOFTE: 1
GPR00: 0000000000001ebe 00007fffce4818b0 0000000021797f00 0000000000000000
GPR04: 00007fff8007ac24 0000000044000484 0000000000004000 00007fff801405e8
GPR08: 900000000280f033 0000000024000484 0000000000000000 0000000000000030
GPR12: 9000000000001003 00007fff801bc370 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR24: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR28: 00007fff801b0000 0000000000000000 00000000217707a0 00007fffce481918
NIP [ffff000000000000] 0xffff000000000000
LR [00000000217706a4] 0x217706a4
Call Trace:
Instruction dump:
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Unrecovered MCE and HMI errors are sent through a special restart OPAL
call to log the platform error. The downside is that they don't go
through normal Linux crash paths, so they don't give much information
to the Linux console.
Change this by providing a special crash function which does some of
the console flushing from the panic() path before calling firmware to
reboot.
The downside of this is a little more code to execute before reaching
the firmware reboot. However in practice, it's critical to get the
Linux console messages output in order to debug a problem. So this is
a desirable tradeoff.
Note on the implementation: It is difficult to plumb a custom reboot
handler into the panic path, because panic does a little bit too much
work. For example, it will try to delay with the timebase, but that
may be corrupted in some cases resulting in a hang without reaching
the platform reboot. Another problem is that panic can invoke the
crash dump code which is not what we want in the case of a hardware
platform error. Long-term the best solution will be to rework the
panic path so it can be suitable for this kind of panic, but for now
we just duplicate a bit of the code.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Some PowerVM firmware when delivering a system reset interrupt to a
little endian OS will mess up SRR registers. They are byteswapped, and
SRR1 is incorrect. An example from a crash:
NIP: 14dd0900000000c0
MSR: 1000000200000080
It's possible to detect this pattern in SRR1 (that would never happen
in normal operation), and at least fix the NIP. After this patch, the
same interrupt reports NIP properly:
NIP [c00000000009dd14] plpar_hcall_norets+0x1c/0x28
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If fadump is not registered, and no other crash or debug handlers are
registered, the powerpc panic handler stops the guest before the
generic panic code can push out debug information to the console.
Currently, system reset injection causes the guest to silently stop.
Stop calling ppc_md.panic in the panic notifier. crash_fadump already
does rtas_os_term() to terminate the guest if fadump is registered.
Remove ppc_md.panic. Move fadump panic notifier into fadump code.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Remove incorrect comment about real mode address restrictions on
powernv (bare metal), and unnecessary clamping to ppc64_rma_size.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When building a random powerpc kernel I hit this build error:
arch/powerpc/platforms/powernv/opal-imc.c:130:13: error : assignment
discards « const » qualifier from pointer target type
[-Werror=discarded-qualifiers]
l_cpumask = cpumask_of_node(nid);
^
This happens because when CONFIG_NUMA=n cpumask_of_node() returns a
const pointer.
This patch simply adds const to l_cpumask to fix this issue.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
[mpe: Flesh out change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The hardware trace macro feature requires access to a chunk of real
memory. This patch provides a debugfs interface to do this. By
writing an integer containing the size of memory to be unplugged into
/sys/kernel/debug/powerpc/memtrace/enable, the code will attempt to
remove that much memory from the end of each NUMA node.
This patch also adds additional debugsfs files for each node that
allows the tracer to interact with the removed memory, as well as
a trace file that allows userspace to read the generated trace.
Note that this patch does not invoke the hardware trace macro, it
only allows memory to be removed during runtime for the trace macro
to utilise.
Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com>
[mpe: Minor formatting etc fixups]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In preparation to stop storing the full node path in full_name, remove the
dependency on full_name from dlpar_attach_node(). Callers of
dlpar_attach_node() already have the parent device_node, so just pass the
parent node into dlpar_attach_node instead of the path. This avoids doing
a lookup of the parent node by the path.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Scott Wood <oss@buserror.net>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linuxppc-dev@lists.ozlabs.org
Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently in the vio.c code we use a comparision against the parent
device node's full path to decide if the device is a PFO or VIO family
device.
Both the ibm,platform-facilities and vdevice nodes are defined by PAPR,
and must have a matching device_type. So instead of using the path we
can instead compare the device_type.
I've checked Qemu and kvmtool both do this correctly, and all the
PowerVM systems I have access to do also. So it seems to be safe.
This removes the dependency on full_name, which is being removed
upstream.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There's a non-trivial dependency between some commits we want to put in
next and the KVM prefetch work around that went into fixes. So merge
fixes into next.
Declare bin_attribute structures as const as they are only passed as an
argument to the function sysfs_create_bin_file. This argument is of
type const, so declare the structure as const.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Normally the values in the resource field and the argument to ARRAY_SIZE
in the num_resources are the same. In this case, the value in the reousrce
field is the same as the one in the previous platform_device structure, and
appears to be a copy-paste error. Replace the value in the resource field
with the argument to the local call to ARRAY_SIZE.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 968159c003 ("powerpc/8xx: Getting rid of remaining use of
CONFIG_8xx") removed all but 2 references to 8xx in Kconfigs.
This patch removes the two remaining ones.
Fixes: 968159c003 ("powerpc/8xx: Getting rid of remaining use of CONFIG_8xx")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Two config options exist to define powerpc MPC8xx:
* CONFIG_PPC_8xx
* CONFIG_8xx
arch/powerpc/platforms/Kconfig.cputype has contained the following
comment about CONFIG_8xx item for some years:
"# this is temp to handle compat with arch=ppc"
There is no more users of CONFIG_8xx, so remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Two config options exist to define powerpc MPC8xx:
* CONFIG_PPC_8xx
* CONFIG_8xx
arch/powerpc/platforms/Kconfig.cputype has contained the following
comment about CONFIG_8xx item for some years:
"# this is temp to handle compat with arch=ppc"
arch/powerpc is now the only place with remaining use of
CONFIG_8xx: get rid of them.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
mpc8xx_pic.c is dedicated to the 8xx, so move it to platform/8xx
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In the same spirit as what was done for 4xx and 44x, move
the 8xx machine check into platforms/8xx
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The entire 8xx directory is omitted if CONFIG_8xx is not enabled, so
within the 8xx/Makefile CONFIG_8xx is always y. So convert
obj-$(CONFIG_8xx) to the more obvious obj-y.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Now that we have 4xx platform directory we can move the 4xx machine
check handler in there. Again we drop get_mc_reason() and replace it
with regs->dsisr directly (which is actually SPRN_ESR).
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We have a lot of code in sysdev for supporting 4xx, ie. either 40x or
44x. Instead it would be cleaner if it was all in platforms/4xx.
This is slightly odd in that we don't actually define any machines in
the 4xx platform, as is usual for a platform directory. But still it
seems like a better result to have all this related code in a directory
by itself.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We have several 44x machine check handlers defined in traps.c. It would
be preferable if they were split out with the platforms that use them.
Do that.
In the process, drop get_mc_reason() and instead just open code the
lookup of reason from regs->dsisr. This avoids a pointless layer of
abstraction.
We know to use regs->dsisr because 44x enables BOOKE which enables
PPC_ADV_DEBUG_REGS, and FSL_BOOKE is not enabled on 44x builds.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The entire 44x directory is omitted if CONFIG_44x is not enabled, so
within the 44x/Makefile CONFIG_44x is always y. So convert
obj-$(CONFIG_44x) to the more obvious obj-y.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Adds support for clearing different sensor groups. OCC inband sensor
groups like CSM, Profiler, Job Scheduler can be cleared using this
driver. The min/max of all sensors belonging to these sensor groups
will be cleared.
Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds support to set power-shifting-ratio which hints the
firmware how to distribute/throttle power between different entities
in a system (e.g CPU v/s GPU). This ratio is used by OCC for power
capping algorithm.
Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Adds a generic powercap framework to change the system powercap
inband through OPAL-OCC command/response interface.
Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This driver currently reports the H_BEST_ENERGY hypervisor call is
unsupported (even when booting in a non-virtualised environment). This
is not something the administrator can do much with, and not
significant for debugging.
Remove it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When DLPAR adding or removing memory we need to check the device
offline status before trying to online/offline the memory. This is
needed because calls to device_online() and device_offline() will
return non-zero for memory that is already online and offline
respectively.
This update resolves two scenarios. First, for a kernel built with
auto-online memory enabled (CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y),
memory will be onlined as part of calls to add_memory(). After adding
the memory the pseries DLPAR code tries to online it and fails since
the memory is already online. The DLPAR code then tries to remove the
memory which produces the oops message below because the memory is not
offline.
The second scenario occurs when removing memory that is already
offline, i.e. marking memory offline (via sysfs) and then trying to
remove that memory. This doesn't work because offlining the already
offline memory does not succeed and the DLPAR code then fails the
DLPAR remove operation.
The fix for both scenarios is to check the device.offline status
before making the calls to device_online() or device_offline().
kernel BUG at mm/memory_hotplug.c:1936!
...
NIP [c0000000002ca428] .remove_memory+0xb8/0xc0
LR [c0000000002ca3cc] .remove_memory+0x5c/0xc0
Call Trace:
.remove_memory+0x5c/0xc0 (unreliable)
.dlpar_add_lmb+0x384/0x400
.dlpar_memory+0x5dc/0xca0
.handle_dlpar_errorlog+0x74/0xe0
.pseries_hp_work_fn+0x2c/0x90
.process_one_work+0x17c/0x460
.worker_thread+0x88/0x500
.kthread+0x15c/0x1a0
.ret_from_kernel_thread+0x58/0xc0
Fixes: 943db62c31 ("powerpc/pseries: Revert 'Auto-online hotplugged memory'")
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
[mpe: Use bool, add explicit rc=0 case, change log typos & formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently, we use the opal call opal_slw_set_reg() to inform the
Sleep-Winkle Engine (SLW) to restore the contents of some of the
Hypervisor state on wakeup from deep idle states that lose full
hypervisor context (characterized by the flag
OPAL_PM_LOSE_FULL_CONTEXT).
However, the current code has a bug in that if opal_slw_set_reg()
fails, we don't disable the use of these deep states (winkle on
POWER8, stop4 onwards on POWER9).
This patch fixes this bug by ensuring that if programing the
sleep-winkle engine to restore the hypervisor states in
pnv_save_sprs_for_deep_states() fails, then we exclude such states by
clearing the OPAL_PM_LOSE_FULL_CONTEXT flag from
supported_cpuidle_states. As a result POWER8 will be prevented from
using winkle for CPU-Hotplug, and POWER9 will put the offlined CPUs to
the default stop state when available.
Further, we ensure in the initialization of the cpuidle-powernv driver
to only include those states whose flags are present in
supported_cpuidle_states, thereby skipping OPAL_PM_LOSE_FULL_CONTEXT
states when they have been disabled due to stop-api failure.
Fixes: 1e1601b38e ("powerpc/powernv/idle: Restore SPRs for deep idle
states via stop API.")
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds powernv_get_random_darn() which utilises the darn instruction,
introduced in ISA v3.0/POWER9.
The darn instruction can potentially return an error, which is supported
by the get_random_seed() API, in normal usage if we see an error we just
return that to the caller.
However when detecting whether darn is functional at boot we try up to
10 times, before deciding that darn doesn't work and failing the
registration of get_random_seed(). That way an intermittent failure
at boot doesn't deprive the system of randomness until the next reboot.
Signed-off-by: Matt Brown <matthew.brown.dev@gmail.com>
[mpe: Move init into a function, tweak change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
P9 has support for PCI peer-to-peer, enabling a device to write in the
MMIO space of another device directly, without interrupting the CPU.
This patch adds support for it on powernv, by adding a new API to be
called by drivers. The pnv_pci_set_p2p(...) call configures an
'initiator', i.e the device which will issue the MMIO operation, and a
'target', i.e. the device on the receiving side.
P9 really only supports MMIO stores for the time being but that's
expected to change in the future, so the API allows to define both
load and store operations.
/* PCI p2p descriptor */
#define OPAL_PCI_P2P_ENABLE 0x1
#define OPAL_PCI_P2P_LOAD 0x2
#define OPAL_PCI_P2P_STORE 0x4
int pnv_pci_set_p2p(struct pci_dev *initiator, struct pci_dev *target,
u64 desc)
It uses a new OPAL call, as the configuration magic is done on the
PHBs by skiboot.
Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Reviewed-by: Russell Currey <ruscur@russell.cc>
[mpe: Drop unrelated OPAL calls, s/uint64_t/u64/, minor formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We have a whole pile of unused code to maintain the ACOP register,
allocate coprocessor PIDs and handle ACOP faults. This mechanism
was used for the HFI adapter on POWER7 which is dead and gone and
whose driver never went upstream. It was used on some A2 core based
stuff that also never saw the light of day.
Take out all that code.
There is still some POWER8 coprocessor code that uses icswx but it's
kernel only and thus doesn't use any of that infrastructure.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
of_irq_to_resource() has recently been fixed to return negative error #'s
along with 0 in case of failure, however the Freescale MPC832x RDB board
code still only regards 0 as a failure indication -- fix it up.
Fixes: 7a4228bbff ("of: irq: use of_irq_get() in of_irq_to_resource()")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch converts most of the in-kernel filesystems that do writeback
out of the pagecache to report errors using the errseq_t-based
infrastructure that was recently added. This allows them to report
errors once for each open file description.
Most filesystems have a fairly straightforward fsync operation. They
call filemap_write_and_wait_range to write back all of the data and
wait on it, and then (sometimes) sync out the metadata.
For those filesystems this is a straightforward conversion from calling
filemap_write_and_wait_range in their fsync operation to calling
file_write_and_wait_range.
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Currently we use the stop-api provided by the firmware to program the
SLW engine to restore the values of hypervisor resources that get lost
on deeper idle states (such as winkle). Since the deep states were
only used for CPU-Hotplug on POWER8 systems, we would program the LPCR
to have the PECE1 bit since Hotplugged CPUs shouldn't be spuriously
woken up by decrementer.
On POWER9, some of the deep platform idle states such as stop4 can be
used in cpuidle as well. In this case, we want the CPU in stop4 to be
woken up by the decrementer when some timer on the CPU expires.
In this patch, we program the stop-api for LPCR with PECE1
bit cleared only when we are offlining the CPU and set it
back once the CPU is online.
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZapWhAAoJEHm+PkMAQRiGKb0IAJM6b7SbWaw69Og7+qiFB+zZ
xp29iXqbE9fPISC6a5BRQV1ONjeDM6opGixGHqGC8Hla6k2IYz25VDNoF8wd0MXN
cz/Ih20vd3C5afxXGe5cTT8lsPAlV0mWXxForlu6j8jPeL62FPfq6RhEkw7AcrYL
yfYy3k3qSdOrrvBdII0WAAUi46UfIs+we9BQgbsMbkHOiqV2K0MOrzKE84Xbgepq
RAy2xg6P4b4+hTx8xTrYc1MXwpnqjRc0oJ08gdmiwW3AOOU7LxYFn7zDkLPWi9Rr
g4x6r4YhBTGxT4wNvovLIiqd9QFs//dMCuPWYwEtTICG48umIqqq24beQ0mvCdg=
=08Ic
-----END PGP SIGNATURE-----
Merge tag 'v4.13-rc1' into fixes
The fixes branch is based off a random pre-rc1 commit, because we had
some fixes that needed to go in before rc1 was released.
However we now need to fix some code that went in after that point, but
before rc1, so merge rc1 to get that code into fixes so we can fix it!
Commit 8e3f1b1d82 ("powerpc/powernv/pci: Enable 64-bit devices to access
>4GB DMA space") introduced the ability for PCI device drivers to request a
DMA mask between 64 and 32 bits and actually get a mask greater than
32-bits. However currently if certain machine configuration dependent
conditions are not meet the code silently falls back to a 32-bit mask.
This makes it hard for device drivers to detect which mask they actually
got. Instead we should return an error when the request could not be
fulfilled which allows drivers to either fallback or implement other
workarounds as documented in DMA-API-HOWTO.txt.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Acked-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
As for commit 68baf692c4 ("powerpc/pseries: Fix of_node_put()
underflow during DLPAR remove"), the call to of_node_put() must be
removed from pSeries_reconfig_remove_node().
dlpar_detach_node() and pSeries_reconfig_remove_node() both call
of_detach_node(), and thus the node should not be released in both
cases.
Fixes: 0829f6d1f6 ("of: device_node kobject lifecycle fixes")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add support to register Nest In-Memory Collection PMU counters.
Patch adds a new device file called "imc-pmu.c" under powerpc/perf
folder to contain all the device PMU functions.
Device tree parser code added to parse the PMU events information
and create sysfs event attributes for the PMU.
Cpumask attribute added along with Cpu hotplug online/offline functions
specific for nest PMU. A new state "CPUHP_AP_PERF_POWERPC_NEST_IMC_ONLINE"
added for the cpu hotplug callbacks. Error handle path frees the memory
and unregisters the CPU hotplug callbacks.
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Code to create platform device for the In-Memory Collection (IMC)
counters. Platform devices are created based on the IMC compatibility.
New header file created to contain the data structures and macros
needed for In-Memory Collection (IMC) counter pmu devices.
The device tree for IMC counters starts at the node "imc-counters".
This node contains all the IMC PMU nodes and event nodes for these IMC
PMUs. Device probe() parses the device to locate three possible IMC
device types (Nest/Core/Thread). Function then branch to parse each
unit nodes to populate vital information such as device memory sizes,
event nodes information, base address for reserve memory access (if
any) and so on. Simple bare-minimum shutdown function added which only
"stops" the engines.
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
[mpe: Fix build with CONFIG_PERF_EVENTS=n]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In-Memory Collection (IMC) counters are performance monitoring
infrastructure. These counters need special sequence of SCOMs to
init/start/stop which is handled by OPAL. And OPAL provides three APIs
to init and control these IMC engines.
OPAL API documentation:
https://github.com/open-power/skiboot/blob/master/doc/opal-api/opal-imc-counters.rst
Patch updates the kernel side powernv platform code to support the new
OPAL APIs
Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use memdup_user() helper instead of open-coding to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
All cases initialise rv, and if they didn't that would be a bug. By
dropping the initialisation we give the compiler the chance to catch
those bugs for us.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use memdup_user_nul() helper instead of open-coding to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Check for validity of cpu before calling get_hard_smp_processor_id().
Found with coverity.
Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
A handful of fixes, mostly for new code.
Some reworking of the new STRICT_KERNEL_RWX support to make sure we also remove
executable permission from __init memory before it's freed.
A fix to some recent optimisations to the hypercall entry where we were
clobbering r12, this was breaking nested guests (PR KVM).
A fix for the recent patch to opal_configure_cores(). This could break booting
on bare metal Power8 boxes if the kernel was built without
CONFIG_JUMP_LABEL_FEATURE_CHECK_DEBUG.
And finally a workaround for spurious PMU interrupts on Power9 DD2.
Thanks to:
Nicholas Piggin, Anton Blanchard, Balbir Singh.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Oy4/
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"A handful of fixes, mostly for new code:
- some reworking of the new STRICT_KERNEL_RWX support to make sure we
also remove executable permission from __init memory before it's
freed.
- a fix to some recent optimisations to the hypercall entry where we
were clobbering r12, this was breaking nested guests (PR KVM).
- a fix for the recent patch to opal_configure_cores(). This could
break booting on bare metal Power8 boxes if the kernel was built
without CONFIG_JUMP_LABEL_FEATURE_CHECK_DEBUG.
- .. and finally a workaround for spurious PMU interrupts on Power9
DD2.
Thanks to: Nicholas Piggin, Anton Blanchard, Balbir Singh"
* tag 'powerpc-4.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm: Mark __init memory no-execute when STRICT_KERNEL_RWX=y
powerpc/mm/hash: Refactor hash__mark_rodata_ro()
powerpc/mm/radix: Refactor radix__mark_rodata_ro()
powerpc/64s: Fix hypercall entry clobbering r12 input
powerpc/perf: Avoid spurious PMU interrupts after idle
powerpc/powernv: Fix boot on Power8 bare metal due to opal_configure_cores()
In commit 1c0eaf0f56 ("powerpc/powernv: Tell OPAL about our MMU mode
on POWER9"), we added additional flags to the OPAL call to configure
CPUs at boot.
These flags only work on Power9 firmwares, and worse can cause boot
failures on Power8 machines, so we check for CPU_FTR_ARCH_300 (aka POWER9)
before adding the extra flags.
Unfortunately we forgot that opal_configure_cores() is called before
the CPU feature checks are dynamically patched, meaning the check
always returns true.
We definitely need to do something to make the CPU feature checks less
prone to bugs like this, but for now the minimal fix is to use
early_cpu_has_feature().
Reported-and-tested-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Fixes: 1c0eaf0f56 ("powerpc/powernv: Tell OPAL about our MMU mode on POWER9")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull ->s_options removal from Al Viro:
"Preparations for fsmount/fsopen stuff (coming next cycle). Everything
gets moved to explicit ->show_options(), killing ->s_options off +
some cosmetic bits around fs/namespace.c and friends. Basically, the
stuff needed to work with fsmount series with minimum of conflicts
with other work.
It's not strictly required for this merge window, but it would reduce
the PITA during the coming cycle, so it would be nice to have those
bits and pieces out of the way"
* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
isofs: Fix isofs_show_options()
VFS: Kill off s_options and helpers
orangefs: Implement show_options
9p: Implement show_options
isofs: Implement show_options
afs: Implement show_options
affs: Implement show_options
befs: Implement show_options
spufs: Implement show_options
bpf: Implement show_options
ramfs: Implement show_options
pstore: Implement show_options
omfs: Implement show_options
hugetlbfs: Implement show_options
VFS: Don't use save/replace_mount_options if not using generic_show_options
VFS: Provide empty name qstr
VFS: Make get_filesystem() return the affected filesystem
VFS: Clean up whitespace in fs/namespace.c and fs/super.c
Provide a function to create a NUL-terminated string from unterminated data
Implement the show_options superblock op for spufs as part of a bid to get
rid of s_options and generic_show_options() to make it easier to implement
a context-based mount where the mount options can be passed individually
over a file descriptor.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeremy Kerr <jk@ozlabs.org>
cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
That will allow OPAL to configure the CPU in an optimal way.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Highlights include:
- Support for STRICT_KERNEL_RWX on 64-bit server CPUs.
- Platform support for FSP2 (476fpe) board
- Enable ZONE_DEVICE on 64-bit server CPUs.
- Generic & powerpc spin loop primitives to optimise busy waiting
- Convert VDSO update function to use new update_vsyscall() interface
- Optimisations to hypercall/syscall/context-switch paths
- Improvements to the CPU idle code on Power8 and Power9.
As well as many other fixes and improvements.
Thanks to:
Akshay Adiga, Andrew Donnellan, Andrew Jeffery, Anshuman Khandual, Anton
Blanchard, Balbir Singh, Benjamin Herrenschmidt, Christophe Leroy, Christophe
Lombard, Colin Ian King, Dan Carpenter, Gautham R. Shenoy, Hari Bathini, Ian
Munsie, Ivan Mikhaylov, Javier Martinez Canillas, Madhavan Srinivasan,
Masahiro Yamada, Matt Brown, Michael Neuling, Michal Suchanek, Murilo
Opsfelder Araujo, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Paul
Mackerras, Pavel Machek, Russell Currey, Santosh Sivaraj, Stephen Rothwell,
Thiago Jung Bauermann, Yang Li.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=w8rj
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Highlights include:
- Support for STRICT_KERNEL_RWX on 64-bit server CPUs.
- Platform support for FSP2 (476fpe) board
- Enable ZONE_DEVICE on 64-bit server CPUs.
- Generic & powerpc spin loop primitives to optimise busy waiting
- Convert VDSO update function to use new update_vsyscall() interface
- Optimisations to hypercall/syscall/context-switch paths
- Improvements to the CPU idle code on Power8 and Power9.
As well as many other fixes and improvements.
Thanks to: Akshay Adiga, Andrew Donnellan, Andrew Jeffery, Anshuman
Khandual, Anton Blanchard, Balbir Singh, Benjamin Herrenschmidt,
Christophe Leroy, Christophe Lombard, Colin Ian King, Dan Carpenter,
Gautham R. Shenoy, Hari Bathini, Ian Munsie, Ivan Mikhaylov, Javier
Martinez Canillas, Madhavan Srinivasan, Masahiro Yamada, Matt Brown,
Michael Neuling, Michal Suchanek, Murilo Opsfelder Araujo, Naveen N.
Rao, Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pavel Machek,
Russell Currey, Santosh Sivaraj, Stephen Rothwell, Thiago Jung
Bauermann, Yang Li"
* tag 'powerpc-4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (158 commits)
powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs
powerpc/mm/radix: Implement STRICT_RWX/mark_rodata_ro() for Radix
powerpc/mm/hash: Implement mark_rodata_ro() for hash
powerpc/vmlinux.lds: Align __init_begin to 16M
powerpc/lib/code-patching: Use alternate map for patch_instruction()
powerpc/xmon: Add patch_instruction() support for xmon
powerpc/kprobes/optprobes: Use patch_instruction()
powerpc/kprobes: Move kprobes over to patch_instruction()
powerpc/mm/radix: Fix execute permissions for interrupt_vectors
powerpc/pseries: Fix passing of pp0 in updatepp() and updateboltedpp()
powerpc/64s: Blacklist rtas entry/exit from kprobes
powerpc/64s: Blacklist functions invoked on a trap
powerpc/64s: Un-blacklist system_call() from kprobes
powerpc/64s: Move system_call() symbol to just after setting MSR_EE
powerpc/64s: Blacklist system_call() and system_call_common() from kprobes
powerpc/64s: Convert .L__replay_interrupt_return to a local label
powerpc64/elfv1: Only dereference function descriptor for non-text symbols
cxl: Export library to support IBM XSL
powerpc/dts: Use #include "..." to include local DT
powerpc/perf/hv-24x7: Aggregate result elements on POWER9 SMT8
...
Merge misc updates from Andrew Morton:
- a few hotfixes
- various misc updates
- ocfs2 updates
- most of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (108 commits)
mm, memory_hotplug: move movable_node to the hotplug proper
mm, memory_hotplug: drop CONFIG_MOVABLE_NODE
mm, memory_hotplug: drop artificial restriction on online/offline
mm: memcontrol: account slab stats per lruvec
mm: memcontrol: per-lruvec stats infrastructure
mm: memcontrol: use generic mod_memcg_page_state for kmem pages
mm: memcontrol: use the node-native slab memory counters
mm: vmstat: move slab statistics from zone to node counters
mm/zswap.c: delete an error message for a failed memory allocation in zswap_dstmem_prepare()
mm/zswap.c: improve a size determination in zswap_frontswap_init()
mm/zswap.c: delete an error message for a failed memory allocation in zswap_pool_create()
mm/swapfile.c: sort swap entries before free
mm/oom_kill: count global and memory cgroup oom kills
mm: per-cgroup memory reclaim stats
mm: kmemleak: treat vm_struct as alternative reference to vmalloc'ed objects
mm: kmemleak: factor object reference updating out of scan_block()
mm: kmemleak: slightly reduce the size of some structures on 64-bit architectures
mm, mempolicy: don't check cpuset seqlock where it doesn't matter
mm, cpuset: always use seqlock when changing task's nodemask
mm, mempolicy: simplify rebinding mempolicies when updating cpusets
...
In this new subsystem we'll try to properly maintain all the generic
code related to dma-mapping, and will further consolidate arch code
into common helpers.
This pull request contains:
- removal of the DMA_ERROR_CODE macro, replacing it with calls
to ->mapping_error so that the dma_map_ops instances are
more self contained and can be shared across architectures (me)
- removal of the ->set_dma_mask method, which duplicates the
->dma_capable one in terms of functionality, but requires more
duplicate code.
- various updates for the coherent dma pool and related arm code
(Vladimir)
- various smaller cleanups (me)
-----BEGIN PGP SIGNATURE-----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=0Fso
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-4.13' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping infrastructure from Christoph Hellwig:
"This is the first pull request for the new dma-mapping subsystem
In this new subsystem we'll try to properly maintain all the generic
code related to dma-mapping, and will further consolidate arch code
into common helpers.
This pull request contains:
- removal of the DMA_ERROR_CODE macro, replacing it with calls to
->mapping_error so that the dma_map_ops instances are more self
contained and can be shared across architectures (me)
- removal of the ->set_dma_mask method, which duplicates the
->dma_capable one in terms of functionality, but requires more
duplicate code.
- various updates for the coherent dma pool and related arm code
(Vladimir)
- various smaller cleanups (me)"
* tag 'dma-mapping-4.13' of git://git.infradead.org/users/hch/dma-mapping: (56 commits)
ARM: dma-mapping: Remove traces of NOMMU code
ARM: NOMMU: Set ARM_DMA_MEM_BUFFERABLE for M-class cpus
ARM: NOMMU: Introduce dma operations for noMMU
drivers: dma-mapping: allow dma_common_mmap() for NOMMU
drivers: dma-coherent: Introduce default DMA pool
drivers: dma-coherent: Account dma_pfn_offset when used with device tree
dma: Take into account dma_pfn_offset
dma-mapping: replace dmam_alloc_noncoherent with dmam_alloc_attrs
dma-mapping: remove dmam_free_noncoherent
crypto: qat - avoid an uninitialized variable warning
au1100fb: remove a bogus dma_free_nonconsistent call
MAINTAINERS: add entry for dma mapping helpers
powerpc: merge __dma_set_mask into dma_set_mask
dma-mapping: remove the set_dma_mask method
powerpc/cell: use the dma_supported method for ops switching
powerpc/cell: clean up fixed mapping dma_ops initialization
tile: remove dma_supported and mapping_error methods
xen-swiotlb: remove xen_swiotlb_set_dma_mask
arm: implement ->dma_supported instead of ->set_dma_mask
mips/loongson64: implement ->dma_supported instead of ->set_dma_mask
...
POWER9 supports hugepages of size 2M and 1G in radix MMU mode. This
patch enables the usage of 1G page size for hugetlbfs. This also update
the helper such we can do 1G page allocation at runtime.
We still don't enable 1G page size on DD1 version. This is to avoid
doing workaround mentioned in commit 6d3a0379eb ("powerpc/mm: Add
radix__tlb_flush_pte_p9_dd1()").
Link: http://lkml.kernel.org/r/1494995292-4443-2-git-send-email-aneesh.kumar@linux.vnet.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here is the big driver core update for 4.13-rc1.
The large majority of this is a lot of cleanup of old fields in the
driver core structures and their remaining usages in random drivers.
All of those fixes have been reviewed by the various subsystem
maintainers. There's also some small firmware updates in here, a new
kobject uevent api interface that makes userspace interaction easier,
and a few other minor things.
All of these have been in linux-next for a long while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWVpX4A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymobgCfd0d13IfpZoq1N41wc6z2Z0xD7cwAnRMeH1/p
kEeISGpHPYP9f8PBh9FO
=Hfqt
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big driver core update for 4.13-rc1.
The large majority of this is a lot of cleanup of old fields in the
driver core structures and their remaining usages in random drivers.
All of those fixes have been reviewed by the various subsystem
maintainers. There's also some small firmware updates in here, a new
kobject uevent api interface that makes userspace interaction easier,
and a few other minor things.
All of these have been in linux-next for a long while with no reported
issues"
* tag 'driver-core-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (56 commits)
arm: mach-rpc: ecard: fix build error
zram: convert remaining CLASS_ATTR() to CLASS_ATTR_RO()
driver-core: remove struct bus_type.dev_attrs
powerpc: vio_cmo: use dev_groups and not dev_attrs for bus_type
powerpc: vio: use dev_groups and not dev_attrs for bus_type
USB: usbip: convert to use DRIVER_ATTR_RW
s390: drivers: convert to use DRIVER_ATTR_RO/WO
platform: thinkpad_acpi: convert to use DRIVER_ATTR_RO/RW
pcmcia: ds: convert to use DRIVER_ATTR_RO
wireless: ipw2x00: convert to use DRIVER_ATTR_RW
net: ehea: convert to use DRIVER_ATTR_RO
net: caif: convert to use DRIVER_ATTR_RO
TTY: hvc: convert to use DRIVER_ATTR_RW
PCI: pci-driver: convert to use DRIVER_ATTR_WO
IB: nes: convert to use DRIVER_ATTR_RW
HID: hid-core: convert to use DRIVER_ATTR_RO and drv_groups
arm: ecard: fix dev_groups patch typo
tty: serdev: use dev_groups and not dev_attrs for bus_type
sparc: vio: use dev_groups and not dev_attrs for bus_type
hid: intel-ish-hid: use dev_groups and not dev_attrs for bus_type
...
Pull SMP hotplug updates from Thomas Gleixner:
"This update is primarily a cleanup of the CPU hotplug locking code.
The hotplug locking mechanism is an open coded RWSEM, which allows
recursive locking. The main problem with that is the recursive nature
as it evades the full lockdep coverage and hides potential deadlocks.
The rework replaces the open coded RWSEM with a percpu RWSEM and
establishes full lockdep coverage that way.
The bulk of the changes fix up recursive locking issues and address
the now fully reported potential deadlocks all over the place. Some of
these deadlocks have been observed in the RT tree, but on mainline the
probability was low enough to hide them away."
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
cpu/hotplug: Constify attribute_group structures
powerpc: Only obtain cpu_hotplug_lock if called by rtasd
ARM/hw_breakpoint: Fix possible recursive locking for arch_hw_breakpoint_init
cpu/hotplug: Remove unused check_for_tasks() function
perf/core: Don't release cred_guard_mutex if not taken
cpuhotplug: Link lock stacks for hotplug callbacks
acpi/processor: Prevent cpu hotplug deadlock
sched: Provide is_percpu_thread() helper
cpu/hotplug: Convert hotplug locking to percpu rwsem
s390: Prevent hotplug rwsem recursion
arm: Prevent hotplug rwsem recursion
arm64: Prevent cpu hotplug rwsem recursion
kprobes: Cure hotplug lock ordering issues
jump_label: Reorder hotplug lock and jump_label_lock
perf/tracing/cpuhotplug: Fix locking order
ACPI/processor: Use cpu_hotplug_disable() instead of get_online_cpus()
PCI: Replace the racy recursion prevention
PCI: Use cpu_hotplug_disable() instead of get_online_cpus()
perf/x86/intel: Drop get_online_cpus() in intel_snb_check_microcode()
x86/perf: Drop EXPORT of perf_check_microcode
...
Once upon a time there were only two PP (page protection) bits. In ISA
2.03 an additional PP bit was added, but because of the layout of the
HPTE it could not be made contiguous with the existing PP bits.
The result is that we now have three PP bits, named pp0, pp1, pp2,
where pp0 occupies bit 63 of dword 1 of the HPTE and pp1 and pp2
occupy bits 1 and 0 respectively. Until recently Linux hasn't used
pp0, however with the addition of _PAGE_KERNEL_RO we started using it.
The problem arises in the LPAR code, where we need to translate the PP
bits into the argument for the H_PROTECT hypercall. Currently the code
only passes bits 0-2 of newpp, which covers pp1, pp2 and N (no
execute), meaning pp0 is not passed to the hypervisor at all.
We can't simply pass it through in bit 63, as that would collide with a
different field in the flags argument, as defined in PAPR. Instead we
have to shift it down to bit 8 (IBM bit 55).
Fixes: e58e87adc8 ("powerpc/mm: Update _PAGE_KERNEL_RO")
Cc: stable@vger.kernel.org # v4.7+
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
[mpe: Simplify the test, rework change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Merge our fixes branch, a few of them are tripping people up while
working on top of next, and we also have a dependency between the CXL
fixes and new CXL code we want to merge into next.
POWER9 introduces a new version of the hypervisor API to access the 24x7
perf counters. The new version changed some of the structures used for
requests and results.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
By the time cell_pci_dma_dev_setup calls cell_dma_dev_setup no device can
have the fixed map_ops set yet as it's only set by the set_dma_mask
method. So move the setup for the fixed case to be only called in that
place instead of indirecting through cell_dma_dev_setup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
DMA_ERROR_CODE is going to go away, so don't rely on it. Instead
define a ->mapping_error method for all IOMMU based dma operation
instances. The direct ops don't ever return an error and don't
need a ->mapping_error method.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
nr_cpu_ids can be limited by nr_cpus boot parameter, whereas NR_CPUS is a
compile time constant, which shouldn't be compared against during cpu kick.
Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
During secondary start, we do not need to BUG_ON if an invalid CPU number
is passed. We already print an error if secondary cannot be started, so
just return an error instead.
Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
To register fadump, boot memory area - the size of low memory chunk that
is required for a kernel to boot successfully when booted with restricted
memory, is assumed to have no holes. But this memory area is currently
not protected from hot-remove operations. So, fadump could fail to
re-register after a memory hot-remove operation, if memory is removed
from boot memory area. To avoid this, ensure that memory from boot
memory area is not hot-removed when fadump is registered.
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Reviewed-by: Mahesh J Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On PHB3/POWER8 systems, devices can select between two different sections
of address space, TVE#0 and TVE#1. TVE#0 is intended for 32bit devices
that aren't capable of addressing more than 4GB. Selecting TVE#1 instead,
with the capability of addressing over 4GB, is performed by setting bit 59
of a PCI address.
However, some devices aren't capable of addressing at least 59 bits, but
still want more than 4GB of DMA space. In order to enable this, reconfigure
TVE#0 to be suitable for 64-bit devices by allocating memory past the
initial 4GB that is inaccessible by 64-bit DMAs.
This bypass mode is only enabled if a device requests 4GB or more of DMA
address space, if the system has PHB3 (POWER8 systems), and if the device
does not share a PE with any devices from different vendors.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add a helper that determines if all the devices contained in a given PE
are all from the same vendor or not. This can be useful in determining
if it's okay to make PE-wide changes that may be suitable for some
devices but not for others.
This is used later in the series.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
As with P7IOC and PHB3, add kernel-side support for decoding and printing
diagnostic data for PHB4.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Diagnostic data for PHBs currently works by allocated a fixed-sized buffer.
This is simple, but either wastes memory (though only a few kilobytes) or
in the case of PHB4 isn't enough to fit the whole data blob.
For machines that don't describe the diagnostic data size in the device
tree, use the hardcoded buffer size as before. For those that do, only
allocate exactly what's needed.
In the special case of P7IOC (which has two types of diag data), the larger
should be specified in the device tree.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Dumping the PE State Tables (PEST) can be highly verbose if a number of PEs
are affected, especially in the case where the whole PHB is frozen and 512
lines get printed. Check for duplicates when dumping the PEST to reduce
useless output.
For example:
PE[0f8] A/B: 9700002600000000 80000080d00000f8
PE[0f9] A/B: 8000000000000000 0000000000000000
PE[..0fe] A/B: as above
PE[0ff] A/B: 8440002b00000000 0000000000000000
instead of:
PE[0f8] A/B: 9700002600000000 80000080d00000f8
PE[0f9] A/B: 8000000000000000 0000000000000000
PE[0fa] A/B: 8000000000000000 0000000000000000
PE[0fb] A/B: 8000000000000000 0000000000000000
PE[0fc] A/B: 8000000000000000 0000000000000000
PE[0fd] A/B: 8000000000000000 0000000000000000
PE[0fe] A/B: 8000000000000000 0000000000000000
PE[0ff] A/B: 8440002b00000000 0000000000000000
and you can imagine how much worse it can get for 512 PEs.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
NPU2 requires an extra explicit flush to an active GPU PID when
sending address translation shoot downs (ATSDs) to reliably flush the
GPU TLB. This patch adds just such a flush at the end of each sequence
of ATSDs.
We can safely use PID 0 which is always reserved and active on the
GPU. PID 0 is only used for init_mm which will never be a user mm on
the GPU. To enforce this we add a check in pnv_npu2_init_context()
just in case someone tries to use PID 0 on the GPU.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
[mpe: Use true/false for bool literals]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In the idle sleep/wake code we know that MSR[EE] is clear, so we can
avoid 2 x mfmsr and 2 x mtmsr by calling the double-underscore
versions of the run latch routines which assume interrupts are already
disabled.
Acked-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When the CPU wakes from low power state, it begins at the system reset
interrupt with the exception that caused the wakeup encoded in SRR1.
Today, powernv idle wakeup ignores the wakeup reason (except a special
case for HMI), and the regular interrupt corresponding to the
exception will fire after the idle wakeup exits.
Change this to replay the interrupt from the idle wakeup before
interrupts are hard-enabled.
Test on POWER8 of context_switch selftests benchmark with polling idle
disabled (e.g., always nap, giving cross-CPU IPIs) gives the following
results:
original wakeup direct
Different threads, same core: 315k/s 264k/s
Different cores: 235k/s 242k/s
There is a slowdown for doorbell IPI (same core) case because system
reset wakeup does not clear the message and the doorbell interrupt
fires again needlessly.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Rather than concern ourselves with any soft-mask logic in the CPU
hotplug handler, just hard disable interrupts. This ensures there
are no lazy-irqs pending, which means we can call directly to idle
instruction in order to sleep.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This simplifies the asm and fixes irq-off tracing over sleep
instructions.
Also move powersave_nap check for POWER8 into C code, and move
PSSCR register value calculation for POWER9 into C.
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 4c3b89effc ("powerpc/powernv: Add sanity checks to
pnv_pci_get_{gpu|npu}_dev") introduced explicit warnings in
pnv_pci_get_npu_dev() when a PCIe device has no associated device-tree
node. However not all PCIe devices have an of_node and
pnv_pci_get_npu_dev() gets indirectly called at least once for every
PCIe device in the system. This results in spurious WARN_ON()'s so
remove it.
The same situation should not exist for pnv_pci_get_gpu_dev() as any
NPU based PCIe device requires a device-tree node.
Fixes: 4c3b89effc ("powerpc/powernv: Add sanity checks to pnv_pci_get_{gpu|npu}_dev")
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The dev_attrs field has long been "depreciated" and is finally being
removed, so move the driver to use the "correct" dev_groups field
instead for struct bus_type.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Johan Hovold <johan@kernel.org>
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: <linuxppc-dev@lists.ozlabs.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dev_attrs field has long been "depreciated" and is finally being
removed, so move the driver to use the "correct" dev_groups field
instead for struct bus_type.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Johan Hovold <johan@kernel.org>
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: <linuxppc-dev@lists.ozlabs.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dev_attrs field has long been "depreciated" and is finally being
removed, so move the driver to use the "correct" dev_groups field
instead for struct bus_type.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: <linuxppc-dev@lists.ozlabs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dev_attrs field has long been "depreciated" and is finally being
removed, so move the driver to use the "correct" dev_groups field
instead for struct bus_type.
Seems-ok: Geoff Levand <geoff@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: <linuxppc-dev@lists.ozlabs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PPC_DT_CPU_FTRs is a bit misplaced in menuconfig, it shows up with
other general kernel options. It's really more at home in the "Platform
Support" section, so move it there.
Also enable it by default, for Book3s 64. It does mostly nothing unless
the device tree properties are found, and we will want it enabled
eventually in distro kernels, so turn it on to start getting more
testing.
Fixes: 5a61ef74f2 ("powerpc/64s: Support new device tree binding for discovering CPU features")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There was only 2 remaining users of CLASS_ATTR() so let's finally get
rid of them and force everyone to use the correct RW/RO/WO versions
instead.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Collation of some spelling fixes from Colin.
Attemping -> Attempting
intialized -> initialized
missmanaged -> mismanaged
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We are running low on CPU feature bits, so we only want to use them when
it's really necessary.
CPU_FTR_SUBCORE is only used in one place, and only in C, so we don't
need it in order to make asm patching work. It can only be set on
"Power8" CPUs, which in practice means POWER8, POWER8E and POWER8NVL.
There are no plans to implement it on future CPUs, but if there ever
were we could retrofit it then.
Although KVM uses subcores, it never looks at the CPU feature, it either
looks at the ISA level or the threads_per_subcore value.
So drop the CPU feature and do a PVR check instead. Drop the device tree
"subcore" feature as we no longer support doing anything with it, and we
will drop it from skiboot too.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When adding or removing memory, the aa_index (affinity value) for the
memblock must also be converted to match the endianness of the rest
of the 'ibm,dynamic-memory' property. Otherwise, subsequent retrieval
of the attribute will likely lead to non-existent nodes, followed by
using the default node in the code inappropriately.
Fixes: 5f97b2a0d1 ("powerpc/pseries: Implement memory hotplug add in the kernel")
Cc: stable@vger.kernel.org # v4.1+
Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If a process dumps core while it has SPU contexts active then we have
code to also dump information about the SPU contexts.
Unfortunately it's been broken for 3 1/2 years, and we didn't notice. In
commit 7b1f4020d0 ("spufs: get rid of dump_emit() wrappers") the nread
variable was removed and rc used instead. That means when the loop exits
successfully, rc has the number of bytes read, but it's then used as the
return value for the function, which should return 0 on success.
So fix it by setting rc = 0 before returning in the success case.
Fixes: 7b1f4020d0 ("spufs: get rid of dump_emit() wrappers")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add platform code support for FSP2 (476fpe) board.
Signed-off-by: Ivan Mikhaylov <ivan@de.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Some of the SPR values (HID0, MSR, SPRG0) don't change during the run
time of a booted kernel, once they have been initialized.
The contents of these SPRs are lost when the CPUs enter deep stop
states. So instead saving and restoring SPRs from the kernel, use the
stop-api provided by the firmware by which the firmware can restore
the contents of these SPRs to their initialized values after wakeup
from a deep stop state.
Apart from these, program the PSSCR value to that of the deepest stop
state via the stop-api. This will be used to indicate to the
underlying firmware as to what stop state to put the threads that have
been woken up by a special-wakeup.
And while we are at programming SPRs via stop-api, ensure that HID1,
HID4 and HID5 registers which are only available on POWER8 are not
requested to be restored by the firware on POWER9.
Signed-off-by: Akshay Adiga <akshay.adiga@linux.vnet.ibm.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The lower 8 bits of core_idle_state_ptr tracks the number of non-idle
threads in the core. This is supposed to be initialized to bit-map
corresponding to the threads_per_core. However, currently it is
initialized to PNV_CORE_IDLE_THREAD_BITS (0xFF). This is correct for
POWER8 which has 8 threads per core, but not for POWER9 which has 4
threads per core.
As a result, on POWER9, core_idle_state_ptr gets initialized to
0xFF. In case when all the threads of the core are idle, the bits
corresponding tracking the idle-threads are non-zero. As a result, the
idle entry/exit code fails to save/restore per-core hypervisor state
since it assumes that there are threads in the cores which are still
active.
Fix this by correctly initializing the lower bits of the
core_idle_state_ptr on the basis of threads_per_core.
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Fixes: a7cd88da97 ("powerpc/powernv: Move CPU-Offline idle state invocation from smp.c to idle.c")
Cc: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
OPAL_CALL uses SRR[01] with MSR_RI=1, which gets corrupted if there
is an interleaving system reset or machine check interrupt.
Use HSRR[01] instead, which does not require MSR_RI=0.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
set_subcores_per_core() holds get_online_cpus() while invoking stop_machine().
stop_machine() invokes get_online_cpus() as well. This is correct, but
prevents the conversion of the hotplug locking to a percpu rwsem.
Use stop_machine_cpuslocked() to avoid the nested call. Convert
*_online_cpus() to the new interfaces while at it.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20170524081548.331016542@linutronix.de
Commit ac29c64089 ("powerpc/mm: Replace _PAGE_USER with
_PAGE_PRIVILEGED") swapped _PAGE_USER for _PAGE_PRIVILEGED, and
introduced check_pte_access() which denied kernel access to
non-_PAGE_PRIVILEGED pages.
However, it didn't add _PAGE_PRIVILEGED to the hash fault handler
for spufs' kernel accesses, so the DMAs required to establish SPE
memory no longer work.
This change adds _PAGE_PRIVILEGED to the hash fault handler for
kernel accesses.
Fixes: ac29c64089 ("powerpc/mm: Replace _PAGE_USER with _PAGE_PRIVILEGED")
Cc: stable@vger.kernel.org # v4.7+
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Reported-by: Sombat Tragolgosol <sombat3960@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
opal_npu_destroy_context() should be called with the NPU PHB, not the
PCIe PHB.
Fixes: 1ab66d1fba ("powerpc/powernv: Introduce address translation services for Nvlink2")
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Highlights include:
- rework the Linux page table geometry to lower memory usage on 64-bit Book3S
(IBM chips) using the Hash MMU.
- support for a new device tree binding for discovering CPU features on future
firmwares.
- Freescale updates from Scott: "Includes a fix for a powerpc/next mm regression
on 64e, a fix for a kernel hang on 64e when using a debugger inside a
relocated kernel, a qman fix, and misc qe improvements."
Thanks to:
Christophe Leroy, Gavin Shan, Horia Geantă, LiuHailong, Nicholas Piggin, Roy
Pledge, Scott Wood, Valentin Longchamp.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=YOQs
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc updates from Michael Ellerman:
"The change to the Linux page table geometry was delayed for more
testing with 16G pages, and there's the new CPU features stuff which
just needed one more polish before going in. Plus a few changes from
Scott which came in a bit late. And then various fixes, mostly minor.
Summary highlights:
- rework the Linux page table geometry to lower memory usage on
64-bit Book3S (IBM chips) using the Hash MMU.
- support for a new device tree binding for discovering CPU features
on future firmwares.
- Freescale updates from Scott:
"Includes a fix for a powerpc/next mm regression on 64e, a fix for
a kernel hang on 64e when using a debugger inside a relocated
kernel, a qman fix, and misc qe improvements."
Thanks to: Christophe Leroy, Gavin Shan, Horia Geantă, LiuHailong,
Nicholas Piggin, Roy Pledge, Scott Wood, Valentin Longchamp"
* tag 'powerpc-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Support new device tree binding for discovering CPU features
powerpc: Don't print cpu_spec->cpu_name if it's NULL
of/fdt: introduce of_scan_flat_dt_subnodes and of_get_flat_dt_phandle
powerpc/64s: Fix unnecessary machine check handler relocation branch
powerpc/mm/book3s/64: Rework page table geometry for lower memory usage
powerpc: Fix distclean with Makefile.postlink
powerpc/64e: Don't place the stack beyond TASK_SIZE
powerpc/powernv: Block PCI config access on BCM5718 during EEH recovery
powerpc/8xx: Adding support of IRQ in MPC8xx GPIO
soc/fsl/qbman: Disable IRQs for deferred QBMan work
soc/fsl/qe: add EXPORT_SYMBOL for the 2 qe_tdm functions
soc/fsl/qe: only apply QE_General4 workaround on affected SoCs
soc/fsl/qe: round brg_freq to 1kHz granularity
soc/fsl/qe: get rid of immrbar_virt_to_phys()
net: ethernet: ucc_geth: fix MEM_PART_MURAM mode
powerpc/64e: Fix hang when debugging programs with relocated kernel
The main thing here is a new implementation of the in-kernel
XICS interrupt controller emulation for POWER9 machines, from Ben
Herrenschmidt.
POWER9 has a new interrupt controller called XIVE (eXternal Interrupt
Virtualization Engine) which is able to deliver interrupts directly
to guest virtual CPUs in hardware without hypervisor intervention.
With this new code, the guest still sees the old XICS interface but
performance is better because the XICS emulation in the host uses the
XIVE directly rather than going through a XICS emulation in firmware.
Conflicts:
arch/powerpc/kernel/cpu_setup_power.S [cherry-picked fix]
arch/powerpc/kvm/book3s_xive.c [include asm/debugfs.h]
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=eE4D
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
- add framework for supporting PCIe devices in Endpoint mode (Kishon
Vijay Abraham I)
- use non-postable PCI config space mappings when possible (Lorenzo
Pieralisi)
- clean up and unify mmap of PCI BARs (David Woodhouse)
- export and unify Function Level Reset support (Christoph Hellwig)
- avoid FLR for Intel 82579 NICs (Sasha Neftin)
- add pci_request_irq() and pci_free_irq() helpers (Christoph Hellwig)
- short-circuit config access failures for disconnected devices (Keith
Busch)
- remove D3 sleep delay when possible (Adrian Hunter)
- freeze PME scan before suspending devices (Lukas Wunner)
- stop disabling MSI/MSI-X in pci_device_shutdown() (Prarit Bhargava)
- disable boot interrupt quirk for ASUS M2N-LR (Stefan Assmann)
- add arch-specific alignment control to improve device passthrough by
avoiding multiple BARs in a page (Yongji Xie)
- add sysfs sriov_drivers_autoprobe to control VF driver binding
(Bodong Wang)
- allow slots below PCI-to-PCIe "reverse bridges" (Bjorn Helgaas)
- fix crashes when unbinding host controllers that don't support
removal (Brian Norris)
- add driver for MicroSemi Switchtec management interface (Logan
Gunthorpe)
- add driver for Faraday Technology FTPCI100 host bridge (Linus
Walleij)
- add i.MX7D support (Andrey Smirnov)
- use generic MSI support for Aardvark (Thomas Petazzoni)
- make Rockchip driver modular (Brian Norris)
- advertise 128-byte Read Completion Boundary support for Rockchip
(Shawn Lin)
- advertise PCI_EXP_LNKSTA_SLC for Rockchip root port (Shawn Lin)
- convert atomic_t to refcount_t in HV driver (Elena Reshetova)
- add CPU IRQ affinity in HV driver (K. Y. Srinivasan)
- fix PCI bus removal in HV driver (Long Li)
- add support for ThunderX2 DMA alias topology (Jayachandran C)
- add ThunderX pass2.x 2nd node MCFG quirk (Tomasz Nowicki)
- add ITE 8893 bridge DMA alias quirk (Jarod Wilson)
- restrict Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices
(Manish Jaggi)
* tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (146 commits)
PCI: Don't allow unbinding host controllers that aren't prepared
ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP
MAINTAINERS: Add PCI Endpoint maintainer
Documentation: PCI: Add userguide for PCI endpoint test function
tools: PCI: Add sample test script to invoke pcitest
tools: PCI: Add a userspace tool to test PCI endpoint
Documentation: misc-devices: Add Documentation for pci-endpoint-test driver
misc: Add host side PCI driver for PCI test function device
PCI: Add device IDs for DRA74x and DRA72x
dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access
PCI: dwc: dra7xx: Workaround for errata id i870
dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode
PCI: dwc: dra7xx: Add EP mode support
PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently
dt-bindings: PCI: Add DT bindings for PCI designware EP mode
PCI: dwc: designware: Add EP mode support
Documentation: PCI: Add binding documentation for pci-test endpoint function
ixgbe: Use pcie_flr() instead of duplicating it
IB/hfi1: Use pcie_flr() instead of duplicating it
PCI: imx6: Fix spelling mistake: "contol" -> "control"
...
- Fix sparse warnings in drivers/of/.
- Add more overlay unittests.
- Update dtc to v1.4.4-8-g756ffc4f52f6. This adds more checks on dts
files such as unit-address formatting and stricter character sets for
node and property names.
- Add a common DT modalias function.
- Move trivial-devices.txt up and out of i2c dir.
- ARM NVIC interrupt controller binding.
- Vendor prefixes for Sensirion, Dioo, Nordic, ROHM.
- Correct some binding file locations.
-----BEGIN PGP SIGNATURE-----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=ca1M
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree updates from Rob Herring:
- fix sparse warnings in drivers/of/
- add more overlay unittests
- update dtc to v1.4.4-8-g756ffc4f52f6. This adds more checks on dts
files such as unit-address formatting and stricter character sets for
node and property names
- add a common DT modalias function
- move trivial-devices.txt up and out of i2c dir
- ARM NVIC interrupt controller binding
- vendor prefixes for Sensirion, Dioo, Nordic, ROHM
- correct some binding file locations
* tag 'devicetree-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (24 commits)
of: fix sparse warnings in fdt, irq, reserved mem, and resolver code
of: fix sparse warning in of_pci_range_parser_one
of: fix sparse warnings in of_find_next_cache_node
of/unittest: Missing unlocks on error
of: fix uninitialized variable warning for overlay test
of: fix unittest build without CONFIG_OF_OVERLAY
of: Add unit tests for applying overlays
of: per-file dtc compiler flags
fpga: region: add missing DT documentation for config complete timeout
of: Add vendor prefix for ROHM Semiconductor
of: fix "/cpus" reference leak in of_numa_parse_cpu_nodes()
of: Add vendor prefix for Nordic Semiconductor
dt-bindings: arm,nvic: Binding for ARM NVIC interrupt controller on Cortex-M
dtc: update warning settings for new bus and node/property name checks
scripts/dtc: Update to upstream version v1.4.4-8-g756ffc4f52f6
scripts/dtc: automate getting dtc version and log in update script
of: Add function for generating a DT modalias with a newline
of: fix of_device_get_modalias returned length when truncating buffers
Documentation: devicetree: move trivial-devices out of I2C realm
dt-bindings: add vendor prefix for Dioo
..
* Region media error reporting: A libnvdimm region device is the parent
to one or more namespaces. To date, media errors have been reported via
the "badblocks" attribute attached to pmem block devices for namespaces
in "raw" or "memory" mode. Given that namespaces can be in "device-dax"
or "btt-sector" mode this new interface reports media errors
generically, i.e. independent of namespace modes or state. This
subsequently allows userspace tooling to craft "ACPI 6.1 Section
9.20.7.6 Function Index 4 - Clear Uncorrectable Error" requests and
submit them via the ioctl path for NVDIMM root bus devices.
* Introduce 'struct dax_device' and 'struct dax_operations': Prompted by
a request from Linus and feedback from Christoph this allows for dax
capable drivers to publish their own custom dax operations. This fixes
the broken assumption that all dax operations are related to a
persistent memory device, and makes it easier for other architectures
and platforms to add customized persistent memory support.
* 'libnvdimm' core updates: A new "deep_flush" sysfs attribute is
available for storage appliance applications to manually trigger memory
controllers to drain write-pending buffers that would otherwise be
flushed automatically by the platform ADR (asynchronous-DRAM-refresh)
mechanism at a power loss event. Support for "locked" DIMMs is included
to prevent namespaces from surfacing when the namespace label data area
is locked. Finally, fixes for various reported deadlocks and crashes,
also tagged for -stable.
* ACPI / nfit driver updates: General updates of the nfit driver to add
DSM command overrides, ACPI 6.1 health state flags support, DSM payload
debug available by default, and various fixes.
Acknowledgements that came after the branch was pushed:
commmit 565851c972 "device-dax: fix sysfs attribute deadlock"
Tested-by: Yi Zhang <yizhan@redhat.com>
commit 23f4984483 "libnvdimm: rework region badblocks clearing"
Tested-by: Toshi Kani <toshi.kani@hpe.com>
-----BEGIN PGP SIGNATURE-----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=Ox0s
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"The bulk of this has been in multiple -next releases. There were a few
late breaking fixes and small features that got added in the last
couple days, but the whole set has received a build success
notification from the kbuild robot.
Change summary:
- Region media error reporting: A libnvdimm region device is the
parent to one or more namespaces. To date, media errors have been
reported via the "badblocks" attribute attached to pmem block
devices for namespaces in "raw" or "memory" mode. Given that
namespaces can be in "device-dax" or "btt-sector" mode this new
interface reports media errors generically, i.e. independent of
namespace modes or state.
This subsequently allows userspace tooling to craft "ACPI 6.1
Section 9.20.7.6 Function Index 4 - Clear Uncorrectable Error"
requests and submit them via the ioctl path for NVDIMM root bus
devices.
- Introduce 'struct dax_device' and 'struct dax_operations': Prompted
by a request from Linus and feedback from Christoph this allows for
dax capable drivers to publish their own custom dax operations.
This fixes the broken assumption that all dax operations are
related to a persistent memory device, and makes it easier for
other architectures and platforms to add customized persistent
memory support.
- 'libnvdimm' core updates: A new "deep_flush" sysfs attribute is
available for storage appliance applications to manually trigger
memory controllers to drain write-pending buffers that would
otherwise be flushed automatically by the platform ADR
(asynchronous-DRAM-refresh) mechanism at a power loss event.
Support for "locked" DIMMs is included to prevent namespaces from
surfacing when the namespace label data area is locked. Finally,
fixes for various reported deadlocks and crashes, also tagged for
-stable.
- ACPI / nfit driver updates: General updates of the nfit driver to
add DSM command overrides, ACPI 6.1 health state flags support, DSM
payload debug available by default, and various fixes.
Acknowledgements that came after the branch was pushed:
- commmit 565851c972 "device-dax: fix sysfs attribute deadlock":
Tested-by: Yi Zhang <yizhan@redhat.com>
- commit 23f4984483 "libnvdimm: rework region badblocks clearing"
Tested-by: Toshi Kani <toshi.kani@hpe.com>"
* tag 'libnvdimm-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (52 commits)
libnvdimm, pfn: fix 'npfns' vs section alignment
libnvdimm: handle locked label storage areas
libnvdimm: convert NDD_ flags to use bitops, introduce NDD_LOCKED
brd: fix uninitialized use of brd->dax_dev
block, dax: use correct format string in bdev_dax_supported
device-dax: fix sysfs attribute deadlock
libnvdimm: restore "libnvdimm: band aid btt vs clear poison locking"
libnvdimm: fix nvdimm_bus_lock() vs device_lock() ordering
libnvdimm: rework region badblocks clearing
acpi, nfit: kill ACPI_NFIT_DEBUG
libnvdimm: fix clear length of nvdimm_forget_poison()
libnvdimm, pmem: fix a NULL pointer BUG in nd_pmem_notify
libnvdimm, region: sysfs trigger for nvdimm_flush()
libnvdimm: fix phys_addr for nvdimm_clear_poison
x86, dax, pmem: remove indirection around memcpy_from_pmem()
block: remove block_device_operations ->direct_access()
block, dax: convert bdev_dax_supported() to dax_direct_access()
filesystem-dax: convert to dax_direct_access()
Revert "block: use DAX for partition table reads"
ext2, ext4, xfs: retrieve dax_device for iomap operations
...
Commit 616badd2fb ("powerpc/powernv: Use OPAL call for TCE kill on
NVLink2") forced all TCE kills to go via the OPAL call for
NVLink2. However the PHB3 implementation of TCE kill was still being
called directly from some functions which in some circumstances caused
a machine check.
This patch adds an equivalent IODA2 version of the function which uses
the correct invalidation method depending on PHB model and changes all
external callers to use it instead.
Fixes: 616badd2fb ("powerpc/powernv: Use OPAL call for TCE kill on NVLink2")
Cc: stable@vger.kernel.org # v4.11+
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Otherwise we might select it when its dependenices aren't enabled,
leading to a build break.
It's default y anyway, so will be on unless someone disables it
manually.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
pnv_eeh_reset() has special handling for PEs whose primary bus is the
root bus or the bus immediately underneath the root port.
The cxl bi-modal card support added in b0b5e5918a ("cxl: Add
cxl_check_and_switch_mode() API to switch bi-modal cards") relies on
this behaviour when hot-resetting the CAPI adapter following a mode
switch. Document this in pnv_eeh_reset() so we don't accidentally break
it.
Suggested-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This enables VFIO on pseries host in order to allow VFIO in nested guest under
PR KVM or DPDK in a HV guest. This adds support of the VFIO_SPAPR_TCE_IOMMU
type.
This adds exchange() callback to allow TCE updates by the SPAPR TCE IOMMU
driver in VFIO.
This initializes DMA32 window parameters in iommu_table_group as as this does
not implement VFIO_SPAPR_TCE_v2_IOMMU and VFIO_SPAPR_TCE_IOMMU just reuses the
existing DMA32 window.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When the userspace requests a small TCE table (which takes less than
the system page size) and more than 1 TCE level, the existing code
returns a single page size which is a bug as each additional TCE level
requires at least one page and this is what
pnv_pci_ioda2_table_alloc_pages() does. And we end up seeing
WARN_ON(!ret && ((*ptbl)->it_allocated_size != table_size))
in drivers/vfio/vfio_iommu_spapr_tce.c.
This replaces incorrect _ALIGN_UP() (which aligns zero up to zero) with
max_t() to fix the bug.
Besides removing WARN_ON(), there should be no other changes in
behaviour.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
pnv_pci_table_alloc() ignores possible failure from kzalloc_node(),
this adds a check. There are 2 callers of pnv_pci_table_alloc(),
one already checks for tbl!=NULL, this adds WARN_ON() to the other path
which only happens during boot time in IODA1 and not expected to fail.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Have the NMI IPI code use this op when the platform defines it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add a simple NMI IPI system that handles concurrency and reentrancy.
The platform does not have to implement a true non-maskable interrupt,
the default is to simply use the debugger break IPI message. This has
now been co-opted for a general IPI message, and users (debugger and
crash) have been reimplemented on top of the NMI system.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Incorporate incremental fixes from Nick]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Cell will wake from low power state at the system reset interrupt,
with the event encoded in SRR1, rather than waking at the interrupt
vector that corresponds to that event.
The system reset handler for this platform decodes SRR1 event reason
and calls the interrupt handler to process it directly from the system
reset handlre.
A subsequent change will treat the system reset interrupt as a Linux NMI
with its own per-CPU stack, and this will no longer work. Remove the
external and decrementer handlers from the system reset handler.
- The external exception remains raised and will fire again at the
EE interrupt vector when system reset returns.
- The decrementer is set to 1 so it will be raised again and fire when
the system reset returns.
It is possible to branch to an idle handler from the system reset
interrupt (like POWER does), then restore a normal stack and restore
this optimisation. But simplicity wins for now.
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
PA Semi will wake from low power state at the system reset interrupt,
with the event encoded in SRR1, rather than waking at the interrupt
vector that corresponds to that event.
The system reset handler for this platform decodes SRR1 event reason
and calls the interrupt handler to process it directly from the system
reset handlre.
A subsequent change will treat the system reset interrupt as a Linux NMI
with its own per-CPU stack, and this will no longer work. Remove the
external and decrementer handlers from the system reset handler.
- The external exception remains raised and will fire again at the
EE interrupt vector when system reset returns.
- The decrementer is set to 1 so it will be raised again and fire when
the system reset returns.
It is possible to branch to an idle handler from the system reset
interrupt (like POWER does), then restore a normal stack and restore
this optimisation. But simplicity wins for now.
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This merges in the powerpc topic/xive branch to bring in the code for
the in-kernel XICS interrupt controller emulation to use the new XIVE
(eXternal Interrupt Virtualization Engine) hardware in the POWER9 chip
directly, rather than via a XICS emulation in firmware.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This patch makes KVM capable of using the XIVE interrupt controller
to provide the standard PAPR "XICS" style hypercalls. It is necessary
for proper operations when the host uses XIVE natively.
This has been lightly tested on an actual system, including PCI
pass-through with a TG3 device.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Cleanup pr_xxx(), unsplit pr_xxx() strings, etc., fix build
failures by adding KVM_XIVE which depends on KVM_XICS and XIVE, and
adding empty stubs for the kvm_xive_xxx() routines, fixup subject,
integrate fixes from Paul for building PR=y HV=n]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Recently we merged the native xive support for Power9, and then separately some
reworks for doorbell IPI support. In isolation both series were OK, but the
merged result had a bug in one case.
On P9 DD1 we use pnv_p9_dd1_cause_ipi() which tries to use doorbells, and then
falls back to the interrupt controller. However the fallback is implemented by
calling icp_ops->cause_ipi. But now that xive support is merged we might be
using xive, in which case icp_ops is not initialised, it's a xics specific
structure. This leads to an oops such as:
Unable to handle kernel paging request for data at address 0x00000028
Oops: Kernel access of bad area, sig: 11 [#1]
NIP pnv_p9_dd1_cause_ipi+0x74/0xe0
LR smp_muxed_ipi_message_pass+0x54/0x70
To fix it, rather than using icp_ops which might be NULL, have both xics and
xive set smp_ops->cause_ipi, and then in the powernv code we save that as
ic_cause_ipi before overriding smp_ops->cause_ipi. For paranoia add a WARN_ON()
to check if somehow smp_ops->cause_ipi is NULL.
Fixes: b866cc2199 ("powerpc: Change the doorbell IPI calling convention")
Tested-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In opal_export_attrs() we dynamically allocate some bin_attributes. They're
allocated with kmalloc() and although we initialise most of the fields, we don't
initialise write() or mmap(), and in particular we don't initialise the lockdep
related fields in the embedded struct attribute.
This leads to a lockdep warning at boot:
BUG: key c0000000f11906d8 not in .data!
WARNING: CPU: 0 PID: 1 at ../kernel/locking/lockdep.c:3136 lockdep_init_map+0x28c/0x2a0
...
Call Trace:
lockdep_init_map+0x288/0x2a0 (unreliable)
__kernfs_create_file+0x8c/0x170
sysfs_add_file_mode_ns+0xc8/0x240
__machine_initcall_powernv_opal_init+0x60c/0x684
do_one_initcall+0x60/0x1c0
kernel_init_freeable+0x2f4/0x3d4
kernel_init+0x24/0x160
ret_from_kernel_thread+0x5c/0xb0
Fix it by kzalloc'ing the attr, which fixes the uninitialised write() and
mmap(), and calling sysfs_bin_attr_init() on it to initialise the lockdep
fields.
Fixes: 11fe909d23 ("powerpc/powernv: Add OPAL exports attributes to sysfs")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Historically struct device_node references were tracked using a kref embedded as
a struct field. Commit 75b57ecf9d ("of: Make device nodes kobjects so they
show up in sysfs") (Mar 2014) refactored device_nodes to be kobjects such that
the device tree could by more simply exposed to userspace using sysfs.
Commit 0829f6d1f6 ("of: device_node kobject lifecycle fixes") (Mar 2014)
followed up these changes to better control the kobject lifecycle and in
particular the referecne counting via of_node_get(), of_node_put(), and
of_node_init().
A result of this second commit was that it introduced an of_node_put() call when
a dynamic node is detached, in of_node_remove(), that removes the initial kobj
reference created by of_node_init().
Traditionally as the original dynamic device node user the pseries code had
assumed responsibilty for releasing this final reference in its platform
specific DLPAR detach code.
This patch fixes a refcount underflow introduced by commit 0829f6d1f6, and
recently exposed by the upstreaming of the recount API.
Messages like the following are no longer seen in the kernel log with this
patch following DLPAR remove operations of cpus and pci devices.
rpadlpar_io: slot PHB 72 removed
refcount_t: underflow; use-after-free.
------------[ cut here ]------------
WARNING: CPU: 5 PID: 3335 at lib/refcount.c:128 refcount_sub_and_test+0xf4/0x110
Fixes: 0829f6d1f6 ("of: device_node kobject lifecycle fixes")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
[mpe: Make change log commit references more verbose]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The POWER8 idle code has a neat trick of programming the power on engine
to restore a low bit into HSPRG0, so idle wakeup code can test and see
if it has been programmed this way and therefore lost all state. Restore
time can be reduced if winkle has not been reached.
However this messes with our r13 PACA pointer, and requires HSPRG0 to be
written to. It also optimizes the slowest and most uncommon case at the
expense of another SPR write in the common nap state wakeup.
Remove this complexity and assume winkle sleeps always require a state
restore. This speedup could be made entirely contained within the winkle
idle code by counting per-core winkles and setting a thread bitmap when
all have gone to winkle.
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Setup a dax_device to have the same lifetime as the axon_ram block
device and add a ->direct_access() method that is equivalent to
axon_ram_direct_access(). Once fs/dax.c has been converted to use
dax_operations the old axon_ram_direct_access() will be removed.
Reported-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Override pcibios_default_alignment() to set default alignment to PAGE_SIZE
for all PCI devices on PowerNV platform. Thus sub-page BARs would not
share a page and could be mapped into guest when VFIO passthrough them.
Signed-off-by: Yongji Xie <elohimes@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Power9 does not implement the icswx instruction. This CPU feature is not visible
to userspace and is only used in the CONFIG_PPC_ICSWX code, which is generally
not enabled, and can only be triggered by other code using icswx, which should
not happen on Power9 systems in the first place. So impact should be minimal.
Fixes: c3ab300ea5 ("powerpc: Add POWER9 cputable entry")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The pseries platform supports Power4 and later CPUs, all of which are
multithreaded and/or multicore.
In practice no one ever builds a SMP=n kernel for these machines. So as
we did for powernv, have the pseries platform imply SMP=y.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The powernv platform supports Power7 and later CPUs, all of which are
multithreaded and multicore.
As such we never build a SMP=n kernel for those machines, other than
possibly for debugging or running in a simulator.
In the debugging case we can get a similar effect by booting with
nr_cpus=1, or there's always the option of building a custom kernel with
SMP hacked out.
For running in simulators the code size reduction from building without
SMP is not particularly important, what matters is the number of
instructions executed. A quick test shows that a SMP=y kernel takes ~6%
more instructions to boot to a shell. Booting with nr_cpus=1 recovers
about half that deficit.
On the flip side, keeping the SMP=n kernel building can be a pain at
times. And although we've mostly kept it building in recent years, no
one is regularly testing that the SMP=n kernel actually boots and works
well on these machines.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Of the 64-bit Book3S platforms, only powermac supports booting on an
actual non-SMP system. The other platforms can be built with SMP
disabled, but it doesn't make a lot of sense given the CPUs they support
are all multicore or multithreaded.
So give platforms the option of forcing SMP=y.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
POWER9 requires msgsync for receiver-side synchronization, and a DD1
workaround restricts IPIs to core-local.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Drop no longer needed asm feature macro changes]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Change the doorbell callers to know about their msgsnd addressing,
rather than have them set a per-cpu target data tag at boot that gets
sent to the cause_ipi functions. The data is only used for doorbell IPI
functions, no other IPI types, so it makes sense to keep that detail
local to doorbell.
Have the platform code understand doorbell IPIs, rather than the
interrupt controller code understand them. Platform code can look at
capabilities it has available and decide which to use.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This merges the arch part of the XIVE support, leaving the final commit
with the KVM specific pieces dangling on the branch for Paul to merge
via the kvm-ppc tree.
POWER9 DD1.0 hardware has a bug where the SPRs of a thread waking up
from stop 0,1,2 with ESL=1 can endup being misplaced in the core. Thus
the HSPRG0 of a thread waking up from can contain the paca pointer of
its sibling.
This patch implements a context recovery framework within threads of a
core, by provisioning space in paca_struct for saving every sibling
threads's paca pointers. Basically, we should be able to arrive at the
right paca pointer from any of the thread's existing paca pointer.
At bootup, during powernv idle-init, we save the paca address of every
CPU in each one its siblings paca_struct in the slot corresponding to
this CPU's index in the core.
On wakeup from a stop, the thread will determine its index in the core
from the TIR register and recover its PACA pointer by indexing into
the correct slot in the provisioned space in the current PACA.
Furthermore, ensure that the NVGPRs are restored from the stack on the
way out by setting the NAPSTATELOST in paca.
[Changelog written with inputs from svaidy@linux.vnet.ibm.com]
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Call it a bug]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently during idle-init on power9, if we don't find suitable stop
states in the device tree that can be used as the
default_stop/deepest_stop, we set stop0 (ESL=1,EC=1) as the default
stop state psscr to be used by power9_idle and deepest stop state
which is used by CPU-Hotplug.
However, if the platform firmware has not configured or enabled a stop
state, the kernel should not make any assumptions and fallback to a
default choice.
If the kernel uses a stop state that is not configured by the platform
firmware, it may lead to further failures which should be avoided.
In this patch, we modify the init code to ensure that the kernel uses
only the stop states exposed by the firmware through the device
tree. When a suitable default stop state isn't found, we disable
ppc_md.power_save for power9. Similarly, when a suitable
deepest_stop_state is not found in the device tree exported by the
firmware, fall back to the default busy-wait loop in the CPU-Hotplug
code.
[Changelog written with inputs from svaidy@linux.vnet.ibm.com]
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently, the powernv cpu-offline function assumes that platform idle
states such as stop on POWER9, winkle/sleep/nap on POWER8 are always
available. On POWER8, it picks nap as the default state if other deep
idle states like sleep/winkle are not available and enabled in the
platform.
On POWER9, nap is not available and all idle states are managed by
STOP instruction. The parameters to the idle state are passed through
processor stop status control register (PSSCR). Hence as such
executing STOP would take parameters from current PSSCR. We do not
want to make any assumptions in kernel on what STOP states and PSSCR
features are configured by the platform.
Ideally platform will configure a good set of stop states that can be
used in the kernel. We would like to start with a clean slate, if the
platform choose to not configure any state or there is an error in
platform firmware that lead to no stop states being configured or
allowed to be requested.
This patch adds a fallback method for CPU-Hotplug that is similar to
snooze loop at idle where the threads are left to spin at low priority
and hence reduce the cycles consumed.
This is a safe fallback mechanism in the case when no stop state would
be requested if the platform firmware did not configure them most
likely due to an error condition.
Requesting a stop state when the platform has not configured them or
enabled them would lead to further error conditions which could be
difficult to debug.
[Changelog written with inputs from svaidy@linux.vnet.ibm.com]
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Move the piece of code in powernv/smp.c::pnv_smp_cpu_kill_self() which
transitions the CPU to the deepest available platform idle state to a
new function named pnv_cpu_offline() in powernv/idle.c. The rationale
behind this code movement is that the data required to determine the
deepest available platform state resides in powernv/idle.c.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc_debugfs_root is the dentry representing the root of the
"powerpc" directory tree in debugfs.
Currently it sits in asm/debug.h, a long with some other things that
have "debug" in the name, but are otherwise unrelated.
Pull it out into a separate header, which also includes linux/debugfs.h,
and convert all the users to include debugfs.h instead of debug.h.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In the recent commit 1ab66d1fba ("powerpc/powernv: Introduce address
translation services for Nvlink2") the NPU code gained a dependency on MMU
notifiers.
All our defconfigs have KVM enabled, which selects MMU_NOTIFIER, but if KVM is
not enabled then the build breaks.
Fix it by always selecting MMU_NOTIFIER when we're building powernv.
Fixes: 1ab66d1fba ("powerpc/powernv: Introduce address translation services for Nvlink2")
Signed-off-by: Alistair Popple <alistair@popple.id.au>
[mpe: Reword change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We have all sort of variants of MMIO accessors for the real mode
instructions. This creates a clean set of accessors based on
Linux normal naming conventions, replacing all occurrences of
the old ones in the tree.
I have purposefully removed the "out/in" variants in favor of
only including __raw variants. Any code using these is already
pretty much hand tuned to operate in a very specific environment.
I've fixed up the 2 users (only one of them actually needed
a barrier in the first place).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The XIVE interrupt controller is the new interrupt controller
found in POWER9. It supports advanced virtualization capabilities
among other things.
Currently we use a set of firmware calls that simulate the old
"XICS" interrupt controller but this is fairly inefficient.
This adds the framework for using XIVE along with a native
backend which OPAL for configuration. Later, a backend allowing
the use in a KVM or PowerVM guest will also be provided.
This disables some fast path for interrupts in KVM when XIVE is
enabled as these rely on the firmware emulation code which is no
longer available when the XIVE is used natively by Linux.
A latter patch will make KVM also directly exploit the XIVE, thus
recovering the lost performance (and more).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Fixup pr_xxx("XIVE:"...), don't split pr_xxx() strings,
tweak Kconfig so XIVE_NATIVE selects XIVE and depends on POWERNV,
fix build errors when SMP=n, fold in fixes from Ben:
Don't call cpu_online() on an invalid CPU number
Fix irq target selection returning out of bounds cpu#
Extra sanity checks on cpu numbers
]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Some powerpc platforms use this to move IRQs away from a CPU being
unplugged. This function has several bugs such as not taking the right
locks or failing to NULL check pointers.
There's a new generic function doing exactly the same thing without all
the bugs, so let's use it instead.
mpe: The obvious place for the select of GENERIC_IRQ_MIGRATION is on
HOTPLUG_CPU, but that doesn't work. On some configs PM_SLEEP_SMP will
select HOTPLUG_CPU even though its dependencies are not met, which means
the select of GENERIC_IRQ_MIGRATION doesn't happen. That leads to the
build breaking. Fix it by moving the select of GENERIC_IRQ_MIGRATION to
SMP.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
New versions of OPAL have a device node /ibm,opal/firmware/exports, each
property of which describes a range of memory in OPAL that Linux might
want to export to userspace for debugging.
This patch adds a sysfs file under 'opal/exports' for each property
found there, and makes it read-only by root.
Signed-off-by: Matt Brown <matthew.brown.dev@gmail.com>
[mpe: Drop counting of props, rename to attr, free on sysfs error, c'log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nvlink2 supports address translation services (ATS) allowing devices
to request address translations from an mmu known as the nest MMU
which is setup to walk the CPU page tables.
To access this functionality certain firmware calls are required to
setup and manage hardware context tables in the nvlink processing unit
(NPU). The NPU also manages forwarding of TLB invalidates (known as
address translation shootdowns/ATSDs) to attached devices.
This patch exports several methods to allow device drivers to register
a process id (PASID/PID) in the hardware tables and to receive
notification of when a device should stop issuing address translation
requests (ATRs). It also adds a fault handler to allow device drivers
to demand fault pages in.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
[mpe: Fix up comment formatting, use flush_tlb_mm()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The pnv_pci_get_{gpu|npu}_dev functions are used to find associations
between nvlink PCIe devices and standard PCIe devices. However they
lacked basic sanity checking which results in NULL pointer
dereferencing if they are incorrect called can be harder to spot than
an explicit WARN_ON.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
For an MCE (Machine Check Exception) that hits while in user mode
MSR(PR=1), print the task info to the console MCE error log. This may
help to identify an application that triggered the MCE.
After this patch the MCE console looks like:
Severe Machine check interrupt [Recovered]
NIP: [0000000010039778] PID: 762 Comm: ebizzy
Initiator: CPU
Error type: SLB [Multihit]
Effective address: 0000000010039778
Severe Machine check interrupt [Not recovered]
NIP: [0000000010039778] PID: 763 Comm: ebizzy
Initiator: CPU
Error type: UE [Page table walk ifetch]
Effective address: 0000000010039778
ebizzy[763]: unhandled signal 7 at 0000000010039778 nip 0000000010039778 lr 0000000010001b44 code 30004
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Now that we use all the available virtual address range, we need to make
sure we don't generate VSID such that it overlaps with the reserved vsid
range. Reserved vsid range include the virtual address range used by the
adjunct partition and also the VRMA virtual segment. We find the context
value that can result in generating such a VSID and reserve it early in
boot.
We don't look at the adjunct range, because for now we disable the
adjunct usage in a Linux LPAR via CAS interface.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[mpe: Rewrite hash__reserve_context_id(), move the rest into pseries]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
With this we have on powernv and pseries /proc/cpuinfo reporting
timebase : 512000000
platform : PowerNV
model : 8247-22L
machine : PowerNV 8247-22L
firmware : OPAL
MMU : Hash
Reviewed-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
BOOKE code is dead code as per the Kconfig details. So make it simpler
by enabling MM_SLICE only for book3s_64. The changes w.r.t nohash is just
removing deadcode. W.r.t ppc64, 4k without hugetlb will now enable MM_SLICE.
But that is good, because we reduce one extra variant which probably is not
getting tested much.
Reviewed-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
sam440ep_setup_rtc() is just called by machine_device_initcall() so make
it __init.
Signed-off-by: Yang Shi <yang.shi@windriver.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
OPAL returns OPAL_WRONG_STATE upon failing to provide sensor data due to
core sleeping/offline. Add a check in opal_get_sensor_data() for sensor
read failure with OPAL_WRONG_STATE return code and return -EIO.
Signed-off-by: Vipin K Parashar <vipin@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
So far iommu_table obejcts were only used in virtual mode and had
a single owner. We are going to change this by implementing in-kernel
acceleration of DMA mapping requests. The proposed acceleration
will handle requests in real mode and KVM will keep references to tables.
This adds a kref to iommu_table and defines new helpers to update it.
This replaces iommu_free_table() with iommu_tce_table_put() and makes
iommu_free_table() static. iommu_tce_table_get() is not used in this patch
but it will be in the following patch.
Since this touches prototypes, this also removes @node_name parameter as
it has never been really useful on powernv and carrying it for
the pseries platform code to iommu_free_table() seems to be quite
useless as well.
This should cause no behavioral change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
At the moment iommu_table can be disposed by either calling
iommu_table_free() directly or it_ops::free(); the only implementation
of free() is in IODA2 - pnv_ioda2_table_free() - and it calls
iommu_table_free() anyway.
As we are going to have reference counting on tables, we need an unified
way of disposing tables.
This moves it_ops::free() call into iommu_free_table() and makes use
of the latter. The free() callback now handles only platform-specific
data.
As from now on the iommu_free_table() calls it_ops->free(), we need
to have it_ops initialized before calling iommu_free_table() so this
moves this initialization in pnv_pci_ioda2_create_table().
This should cause no behavioral change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In real mode, TCE tables are invalidated using special
cache-inhibited store instructions which are not available in
virtual mode
This defines and implements exchange_rm() callback. This does not
define set_rm/clear_rm/flush_rm callbacks as there is no user for those -
exchange/exchange_rm are only to be used by KVM for VFIO.
The exchange_rm callback is defined for IODA1/IODA2 powernv platforms.
This replaces list_for_each_entry_rcu with its lockless version as
from now on pnv_pci_ioda2_tce_invalidate() can be called in
the real mode too.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
POWER9 adds form 1 scoms. The form of the indirection is specified in
the top nibble of the scom address.
Currently we do some (ugly) bit mangling so that we can fit a 64 bit
scom address into the debugfs interface. The current code only shifts
the top bit (indirect bit).
This patch changes it to shift the whole top nibble so that the form
of the indirection is also shifted.
This patch is backwards compatible with older scoms.
(This change isn't required in the arch/powerpc/platforms/powernv/opal-prd.c
scom interface as it passes the whole 64bit scom address without any bit
mangling)
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently the code to perform an OPAL call is duplicated between the
normal path and path taken when tracepoints are enabled. There's no
real need for this and combining them makes opal_tracepoint_entry
considerably easier to understand.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The modalias sysfs attr is lacking a newline for DT aliases on platform
devices. The macio and ibmebus correctly add the newline, but open code it.
Introduce a new function, of_device_modalias(), that fills the buffer with
the modalias including the newline and update users of the old
of_device_get_modalias function.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PNV_IODA_PE_DEV is only used for NPU devices (emulated PCI bridges
representing NVLink). These are added to IOMMU groups with corresponding
NVIDIA devices after all non-NPU PEs are setup; a special helper -
pnv_pci_ioda_setup_iommu_api() - handles this in pnv_pci_ioda_fixup().
The pnv_pci_ioda2_setup_dma_pe() helper sets up DMA for a PE. It is called
for VFs (so it does not handle NPU case) and PCI bridges but only
IODA1 and IODA2 types. An NPU bridge has its own type id (PNV_PHB_NPU)
so pnv_pci_ioda2_setup_dma_pe() cannot be called on NPU and therefore
(pe->flags & PNV_IODA_PE_DEV) is always "false".
This removes not used iommu_add_device(). This should not cause any
behavioral change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The iommu_table_ops callbacks are declared CPU endian as they take and
return "unsigned long"; underlying hardware tables are big-endian.
However get() was missing be64_to_cpu(), this adds the missing conversion.
The only caller of this is crash dump at arch/powerpc/kernel/iommu.c,
iommu_table_clear() which only compares TCE to zero so this change
should not cause behavioral change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
struct hcall_stats is only used in hvCall_inst.c, so move it there.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
As of commit 438cc81a41 ("powerpc/pseries: Automatically resize HPT
for memory hot add/remove"), when running on the pseries platform, we
always attempt to use the PAPR extension to resize the hashed page
table (HPT) when we add or remove memory.
This is fine, but when the extension is not available we'll give a
harmless, but scary warning. Instead check if the firmware supports HPT
resizing before populating the mmu_hash_ops.resize_hpt pointer.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
A synchronous machine check is an exception raised by the attempt to
execute the current instruction. If the error can't be corrected, it
can make sense to SIGBUS the currently running process.
In other cases, the error condition is not related to the current
instruction, so killing the current process is not the right thing to
do.
Today, all machine checks are MCE_SEV_ERROR_SYNC, so this has no
practical change. It will be used to handle POWER9 asynchronous
machine checks.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On POWERNV platform, in order to do DMA via IOMMU (i.e. 32bit DMA in
our case), a device needs an iommu_table pointer set via
set_iommu_table_base().
The codeflow is:
- pnv_pci_ioda2_setup_dma_pe()
- pnv_pci_ioda2_setup_default_config()
- pnv_ioda_setup_bus_dma() [1]
pnv_pci_ioda2_setup_dma_pe() creates IOMMU groups,
pnv_pci_ioda2_setup_default_config() does default DMA setup,
pnv_ioda_setup_bus_dma() takes a bus PE (on IODA2, all physical function
PEs as bus PEs except NPU), walks through all underlying buses and
devices, adds all devices to an IOMMU group and sets iommu_table.
On IODA2, when VFIO is used, it takes ownership over a PE which means it
removes all tables and creates new ones (with a possibility of sharing
them among PEs). So when the ownership is returned from VFIO to
the kernel, the iommu_table pointer written to a device at [1] is
stale and needs an update.
This adds an "add_to_group" parameter to pnv_ioda_setup_bus_dma()
(in fact re-adds as it used to be there a while ago for different
reasons) to tell the helper if a device needs to be added to
an IOMMU group with an iommu_table update or just the latter.
This calls pnv_ioda_setup_bus_dma(..., false) from
pnv_ioda2_release_ownership() so when the ownership is restored,
32bit DMA can work again for a device. This does the same thing
on obtaining ownership as the iommu_table point is stale at this point
anyway and it is safer to have NULL there.
We did not hit this earlier as all tested devices in recent years were
only using 64bit DMA; the rare exception for this is MPT3 SAS adapter
which uses both 32bit and 64bit DMA access and it has not been tested
with VFIO much.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The IODA2 specification says that a 64 DMA address cannot use top 4 bits
(3 are reserved and one is a "TVE select"); bottom page_shift bits
cannot be used for multilevel table addressing either.
The existing IODA2 table allocation code aligns the minimum TCE table
size to PAGE_SIZE so in the case of 64K system pages and 4K IOMMU pages,
we have 64-4-12=48 bits. Since 64K page stores 8192 TCEs, i.e. needs
13 bits, the maximum number of levels is 48/13 = 3 so we physically
cannot address more and EEH happens on DMA accesses.
This adds a check that too many levels were requested.
It is still possible to have 5 levels in the case of 4K system page size.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Five fairly small fixes for things that went in this cycle.
A fairly large patch to rework the CAS logic on Power9, necessitated by a late
change to the firmware API, and we can't boot without it.
Three fixes going to stable, allowing more instructions to be emulated on LE,
fixing a boot crash on 32-bit Freescale BookE machines, and the OPAL XICS
workaround.
And a patch from me to sort the selects under CONFIG PPC. Annoying churn, but
worth it in the long run, and best for it to go in now to avoid conflicts.
Thanks to:
Alexey Kardashevskiy, Anton Blanchard, Balbir Singh, Gautham R. Shenoy,
Laurentiu Tudor, Nicholas Piggin, Paul Mackerras, Ravi Bangoria, Sachin Sant,
Shile Zhang, Suraj Jitindar Singh.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJYvqSxAAoJEFHr6jzI4aWAjMQP/06OFGz3VQvO5Q8jPsqRF22y
Wr+04OKFmKnYVObdQk15HGOagp1fSkWWHfP/eu50kx1WNCzq7tQdLjNSi7H4F3s1
4NwlaOfSQoxctsVtfnITJkfVScjcxK7XVagswtb3wvBpBx4lwD8fGwxkSxj6NhRw
PNxLi44wobb8mDyR6L/6tJKBI2Jt12qXZY+kBQIleun5+lF8fNXIu4qPiglMOia6
oPhXlp4RASt8wz74H8JuMTwGv17MxG+zvbkDPwQC7PI/fohJLybgWEfByN4H5UMy
7Xi/lWHlShAyc7ulAIN+A1mHKY9LSv45U6qrrHFUJgRftZihoZHe6ekcI+h5oFVX
chP9oUrQNeeZ5QqUC4rYdWwsMfiXBI0y5+BCupItixXc1LANBH9Ym9IECbgPRP93
LQVqiS4958KijHlYBOA2zPicl/FnVO16orqakyRS0B3lQ54XBvhcgG8gIXjQr8PM
Mt2W4r6RtGJ4ddhUPpF/W4lEuR4+dmXfEqs7DkgBKRbvi8XYkiLx2byBNh/OMRUG
T4ILXsYf50AKRAq/jFTs9A0zkjtmtBeDdn96Mcan8i3WZuTQ7b8mQlC46zEg23A8
XmTG2xt7N1dMjjwS78CfnvQ8sIVtA9AUfK37aTc0ICMsBCqEcWLAhHKZyCw0h25C
wq9BMn4e5Gdg2xLTHKlL
=SxON
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Five fairly small fixes for things that went in this cycle.
A fairly large patch to rework the CAS logic on Power9, necessitated
by a late change to the firmware API, and we can't boot without it.
Three fixes going to stable, allowing more instructions to be emulated
on LE, fixing a boot crash on 32-bit Freescale BookE machines, and the
OPAL XICS workaround.
And a patch from me to sort the selects under CONFIG PPC. Annoying
churn, but worth it in the long run, and best for it to go in now to
avoid conflicts.
Thanks to:
Alexey Kardashevskiy, Anton Blanchard, Balbir Singh, Gautham R.
Shenoy, Laurentiu Tudor, Nicholas Piggin, Paul Mackerras, Ravi
Bangoria, Sachin Sant, Shile Zhang, Suraj Jitindar Singh"
* tag 'powerpc-4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Sort the selects under CONFIG_PPC
powerpc/64: Fix L1D cache shape vector reporting L1I values
powerpc/64: Avoid panic during boot due to divide by zero in init_cache_info()
powerpc: Update to new option-vector-5 format for CAS
powerpc: Parse the command line before calling CAS
powerpc/xics: Work around limitations of OPAL XICS priority handling
powerpc/64: Fix checksum folding in csum_add()
powerpc/powernv: Fix opal tracepoints with JUMP_LABEL=n
powerpc/booke: Fix boot crash due to null hugepd
powerpc: Fix compiling a BE kernel with a powerpc64le toolchain
selftest/powerpc: Fix false failures for skipped tests
powerpc/powernv: Fix bug due to labeling ambiguity in power_enter_stop
powerpc/64: Invalidate process table caching after setting process table
powerpc: emulate_step() tests for load/store instructions
powerpc: Emulation support for load/store instructions on LE
The recent commit to allow calling OPAL calls in real mode, commit
ab9bad0ead ("powerpc/powernv: Remove separate entry for OPAL real mode
calls"), introduced a bug when CONFIG_JUMP_LABEL=n.
The commit moved the "mfmsr r12" prior to the call to OPAL_BRANCH, but
we missed that OPAL_BRANCH clobbers r12 when jump labels are disabled.
This leads to us using the tracepoint refcount as the MSR value,
typically zero, and saving that into PACASAVEDMSR. When we return from
OPAL we use that value as the MSR value for rfid, meaning we switch to
32-bit BE real mode - hilarity ensues.
Fix it by using r11 in OPAL_BRANCH, which is not live at the time the
macro is used in OPAL_CALL.
Fixes: ab9bad0ead ("powerpc/powernv: Remove separate entry for OPAL real mode calls")
Suggested-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We are going to split <linux/sched/hotplug.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/hotplug.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fix up affected files that include this signal functionality via sched.h.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/signal.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We are going to split <linux/sched/mm.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/mm.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
The APIs that are going to be moved first are:
mm_alloc()
__mmdrop()
mmdrop()
mmdrop_async_fn()
mmdrop_async()
mmget_not_zero()
mmput()
mmput_async()
get_task_mm()
mm_access()
mm_release()
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We are going to split <linux/sched/loadavg.h> out of <linux/sched.h>, which
will have to be picked up from a couple of .c files.
Create a trivial placeholder <linux/sched/topology.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
So the original intention of tsk_cpus_allowed() was to 'future-proof'
the field - but it's pretty ineffectual at that, because half of
the code uses ->cpus_allowed directly ...
Also, the wrapper makes the code longer than the original expression!
So just get rid of it. This also shrinks <linux/sched.h> a bit.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Highlights include:
- An update of the disassembly code used by xmon to the latest versions in
binutils. We've received permission from all the authors of the relevant
binutils changes to relicense their changes to the relevant files from GPLv3
to GPLv2, for inclusion in Linux. Thanks to Peter Bergner for doing the leg
work to get permission from everyone.
- Addition of the "architected" Power9 CPU table entry, allowing us to boot
in Power9 architected mode under a hypervisor.
- Updates to the Power9 PMU code.
- Implementation of clear_bit_unlock_is_negative_byte() to optimise
unlock_page().
- Freescale updates from Scott: "Highlights include 8xx breakpoints and perf,
t1042rdb display support, and board updates."
Thanks to:
Al Viro, Andrew Donnellan, Aneesh Kumar K.V, Balbir Singh, Douglas Miller,
Frédéric Weisbecker, Gavin Shan, Madhavan Srinivasan, Michael Roth, Nathan
Fontenot, Naveen N. Rao, Nicholas Piggin, Peter Bergner, Paul E. McKenney,
Rashmica Gupta, Russell Currey, Sahil Mehta, Stewart Smith.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=rspd
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc updates from Michael Ellerman:
"Highlights include:
- an update of the disassembly code used by xmon to the latest
versions in binutils. We've received permission from all the
authors of the relevant binutils changes to relicense their changes
to the relevant files from GPLv3 to GPLv2, for inclusion in Linux.
Thanks to Peter Bergner for doing the leg work to get permission
from everyone.
- addition of the "architected" Power9 CPU table entry, allowing us
to boot in Power9 architected mode under a hypervisor.
- updates to the Power9 PMU code.
- implementation of clear_bit_unlock_is_negative_byte() to optimise
unlock_page().
- Freescale updates from Scott: "Highlights include 8xx breakpoints
and perf, t1042rdb display support, and board updates."
Thanks to:
Al Viro, Andrew Donnellan, Aneesh Kumar K.V, Balbir Singh, Douglas
Miller, Frédéric Weisbecker, Gavin Shan, Madhavan Srinivasan,
Michael Roth, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Peter
Bergner, Paul E. McKenney, Rashmica Gupta, Russell Currey, Sahil
Mehta, Stewart Smith"
* tag 'powerpc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (48 commits)
powerpc: Remove leftover cputime_to_nsecs call causing build error
powerpc/mm/hash: Always clear UPRT and Host Radix bits when setting up CPU
powerpc/optprobes: Fix TOC handling in optprobes trampoline
powerpc/pseries: Advertise Hot Plug Event support to firmware
cxl: fix nested locking hang during EEH hotplug
powerpc/xmon: Dump memory in CPU endian format
powerpc/pseries: Revert 'Auto-online hotplugged memory'
powerpc/powernv: Make PCI non-optional
powerpc/64: Implement clear_bit_unlock_is_negative_byte()
powerpc/powernv: Remove unused variable in pnv_pci_sriov_disable()
powerpc/kernel: Remove error message in pcibios_setup_phb_resources()
powerpc/mm: Fix typo in set_pte_at()
pci/hotplug/pnv-php: Disable MSI and PCI device properly
pci/hotplug/pnv-php: Disable surprise hotplug capability on conflicts
pci/hotplug/pnv-php: Remove WARN_ON() in pnv_php_put_slot()
powerpc: Add POWER9 architected mode to cputable
powerpc/perf: use is_kernel_addr macro in perf_get_misc_flags()
powerpc/perf: Avoid FAB_*_MATCH checks for power9
powerpc/perf: Add restrictions to PMC5 in power9 DD1
powerpc/perf: Use Instruction Counter value
...
Fix typos and add the following to the scripts/spelling.txt:
overrided||overridden
Link: http://lkml.kernel.org/r/1481573103-11329-22-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix typos and add the following to the scripts/spelling.txt:
partiton||partition
Link: http://lkml.kernel.org/r/1481573103-11329-7-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bart Van Assche noted that the ib DMA mapping code was significantly
similar enough to the core DMA mapping code that with a few changes
it was possible to remove the IB DMA mapping code entirely and
switch the RDMA stack to use the core DMA mapping code. This resulted
in a nice set of cleanups, but touched the entire tree. This branch
will be submitted separately to Linus at the end of the merge window
as per normal practice for tree wide changes like this.
-----BEGIN PGP SIGNATURE-----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=e0Si
-----END PGP SIGNATURE-----
Merge tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma DMA mapping updates from Doug Ledford:
"Drop IB DMA mapping code and use core DMA code instead.
Bart Van Assche noted that the ib DMA mapping code was significantly
similar enough to the core DMA mapping code that with a few changes it
was possible to remove the IB DMA mapping code entirely and switch the
RDMA stack to use the core DMA mapping code.
This resulted in a nice set of cleanups, but touched the entire tree
and has been kept separate for that reason."
* tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits)
IB/rxe, IB/rdmavt: Use dma_virt_ops instead of duplicating it
IB/core: Remove ib_device.dma_device
nvme-rdma: Switch from dma_device to dev.parent
RDS: net: Switch from dma_device to dev.parent
IB/srpt: Modify a debug statement
IB/srp: Switch from dma_device to dev.parent
IB/iser: Switch from dma_device to dev.parent
IB/IPoIB: Switch from dma_device to dev.parent
IB/rxe: Switch from dma_device to dev.parent
IB/vmw_pvrdma: Switch from dma_device to dev.parent
IB/usnic: Switch from dma_device to dev.parent
IB/qib: Switch from dma_device to dev.parent
IB/qedr: Switch from dma_device to dev.parent
IB/ocrdma: Switch from dma_device to dev.parent
IB/nes: Remove a superfluous assignment statement
IB/mthca: Switch from dma_device to dev.parent
IB/mlx5: Switch from dma_device to dev.parent
IB/mlx4: Switch from dma_device to dev.parent
IB/i40iw: Remove a superfluous assignment statement
IB/hns: Switch from dma_device to dev.parent
...
->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to
take a vma and vmf parameter when the vma already resides in vmf.
Remove the vma parameter to simplify things.
[arnd@arndb.de: fix ARM build]
Link: http://lkml.kernel.org/r/20170125223558.1451224-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Highlights include:
- Support for direct mapped LPC on POWER9, giving Linux direct access to
devices that may be on there such as a UART.
- Memory hotplug support for the Power9 Radix MMU.
- Add new AUX vectors describing the processor's cache geometry, to be used by
glibc.
- The ability for a guest to ask the hypervisor to resize the guest's hash
table, and in addition support for doing so automatically when memory is
hotplugged into/out-of the guest. This allows the hash table to be sized
based on the current memory usage of the guest, rather than the maximum
possible memory usage.
- Implementation of optprobes (kprobe optimisation) for powerpc.
In addition there's the topic branch shared with the KVM tree, which includes
support for guests to use the Radix MMU on Power9.
Thanks to:
Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T, Anton Blanchard,
Benjamin Herrenschmidt, Chris Packham, Daniel Axtens, Daniel Borkmann, David
Gibson, Finn Thain, Gautham R. Shenoy, Gavin Shan, Greg Kurz, Joel Stanley,
John Allen, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring, Michael
Neuling, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Paul Mackerras, Ravi
Bangoria, Reza Arbab, Shailendra Singh, Vaibhav Jain, Wei Yongjun.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Icle
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Highlights include:
- Support for direct mapped LPC on POWER9, giving Linux direct access
to devices that may be on there such as a UART.
- Memory hotplug support for the Power9 Radix MMU.
- Add new AUX vectors describing the processor's cache geometry, to
be used by glibc.
- The ability for a guest to ask the hypervisor to resize the guest's
hash table, and in addition support for doing so automatically when
memory is hotplugged into/out-of the guest. This allows the hash
table to be sized based on the current memory usage of the guest,
rather than the maximum possible memory usage.
- Implementation of optprobes (kprobe optimisation) for powerpc.
In addition there's the topic branch shared with the KVM tree, which
includes support for guests to use the Radix MMU on Power9.
Thanks to:
Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T, Anton
Blanchard, Benjamin Herrenschmidt, Chris Packham, Daniel Axtens,
Daniel Borkmann, David Gibson, Finn Thain, Gautham R. Shenoy, Gavin
Shan, Greg Kurz, Joel Stanley, John Allen, Madhavan Srinivasan,
Mahesh Salgaonkar, Markus Elfring, Michael Neuling, Nathan Fontenot,
Naveen N. Rao, Nicholas Piggin, Paul Mackerras, Ravi Bangoria, Reza
Arbab, Shailendra Singh, Vaibhav Jain, Wei Yongjun"
* tag 'powerpc-4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (129 commits)
powerpc/mm/radix: Skip ptesync in pte update helpers
powerpc/mm/radix: Use ptep_get_and_clear_full when clearing pte for full mm
powerpc/mm/radix: Update pte update sequence for pte clear case
powerpc/mm: Update PROTFAULT handling in the page fault path
powerpc/xmon: Fix data-breakpoint
powerpc/mm: Fix build break with BOOK3S_64=n and MEMORY_HOTPLUG=y
powerpc/mm: Fix build break when CMA=n && SPAPR_TCE_IOMMU=y
powerpc/mm: Fix build break with RADIX=y & HUGETLBFS=n
powerpc/pseries: Fix typo in parameter description
powerpc/kprobes: Remove kprobe_exceptions_notify()
kprobes: Introduce weak variant of kprobe_exceptions_notify()
powerpc/ftrace: Fix confusing help text for DISABLE_MPROFILE_KERNEL
powerpc/powernv: Fix opal_exit tracepoint opcode
powerpc: Add a prototype for mcount() so it can be versioned
powerpc: Drop GPL from of_node_to_nid() export to match other arches
powerpc/kprobes: Optimize kprobe in kretprobe_trampoline()
powerpc/kprobes: Implement Optprobes
powerpc/kprobes: Fixes for kprobe_lookup_name() on BE
powerpc: Add helper to check if offset is within relative branch range
powerpc/bpf: Introduce __PPC_SH64()
...
This reverts commit ec99907244 ("powerpc/pseries: Auto-online
hotplugged memory"), and 9dc512819e ("powerpc: Fix unused function
warning 'lmb_to_memblock'").
Using the auto-online acpability does online added memory but does not
update the associated device struct to indicate that the memory is
online. This causes the pseries memory DLPAR code to fail when trying to
remove a LMB that was previously removed and added back. This happens
when validating that the LMB is removable.
This patch reverts to the previous behavior of calling device_online()
to online the LMB when it is DLPAR added and moves the lmb_to_memblock()
routine out of CONFIG_MEMORY_HOTREMOVE now that we call it for add.
Fixes: ec99907244 ("powerpc/pseries: Auto-online hotplugged memory")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Bare metal systems without PCI don't exist, so there's no real point in
making PCI optional, it just breaks the build from time to time. In fact
the build is broken now if you turn off PCI_MSI but enable KVM.
Using select for PCI is OK because we (powerpc) define config PCI, and it
has no dependencies. Selecting PCI_MSI is slightly fishy, because it's
in drivers/pci and it is user-visible, but its only dependency is PCI,
so selecting it can't actually lead to breakage.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The local variable @iov isn't used, to remove it.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Indexed-count remove for memory hotplug guarantees that a contiguous block
of <count> lmbs beginning at a specified <index> will be unassigned (NOT
that <count> lmbs will be removed). Because of Qemu's per-DIMM memory
management, the removal of a contiguous block of memory currently
requires a series of individual calls. Indexed-count remove reduces
this series into a single call.
Signed-off-by: Sahil Mehta <sahilmehta17@gmail.com>
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Indexed-count add for memory hotplug guarantees that a contiguous block
of <count> lmbs beginning at a specified <drc index> will be assigned,
any LMBs in this range that are not already assigned will be DLPAR added.
Because of Qemu's per-DIMM memory management, the addition of a contiguous
block of memory currently requires a series of individual calls to add
each LMB in the block. Indexed-count add reduces this series of calls to
a single call for the entire block.
Signed-off-by: Sahil Mehta <sahilmehta17@gmail.com>
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We broke the build when CONFIG_MEMORY_HOTREMOVE=n:
arch/powerpc/platforms/pseries/hotplug-memory.c:821:8: error: implicit
declaration of function 'dlpar_memory_readd_by_index'
Add a dummy to fix it.
Fixes: e70d59700f ("powerpc/pseries: Introduce memory hotplug READD operation")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In all the years it's been in the tree it had never been used by
anything - it would instantly trigger BUG_ON() in fs/fcntl.c due to
bogus band argument (ie. POLLIN not POLL_IN) passed to kill_fasync().
Since nobody had ever used it in ten years, let's just rip it out and be
done with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Fix typo in "hotplug_delay" parameter description. This allows modinfo
to match the help text to the parameter.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently the opal_exit tracepoint usually shows the opcode as 0:
<idle>-0 [047] d.h. 635.654292: opal_entry: opcode=63
<idle>-0 [047] d.h. 635.654296: opal_exit: opcode=0 retval=0
kopald-1209 [019] d... 636.420943: opal_entry: opcode=10
kopald-1209 [019] d... 636.420959: opal_exit: opcode=0 retval=0
This is because we incorrectly load the opcode into r0 before calling
__trace_opal_exit(), whereas it expects the opcode in r3 (first function
parameter). In fact we are leaving the retval in r3, so opcode and
retval will always show the same value.
Instead load the opcode into r3, resulting in:
<idle>-0 [040] d.h. 636.618625: opal_entry: opcode=63
<idle>-0 [040] d.h. 636.618627: opal_exit: opcode=63 retval=0
Fixes: c49f63530b ("powernv: Add OPAL tracepoints")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds support for using two hypercalls to change the size of the
main hash page table while running as a PAPR guest. For now these
hypercalls are only in experimental qemu versions.
The interface is two part: first H_RESIZE_HPT_PREPARE is used to
allocate and prepare the new hash table. This may be slow, but can be
done asynchronously. Then, H_RESIZE_HPT_COMMIT is used to switch to the
new hash table. This requires that no CPUs be concurrently updating the
HPT, and so must be run under stop_machine().
This also adds a debugfs file which can be used to manually control
HPT resizing or testing purposes.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Paul Mackerras <paulus@samba.org>
[mpe: Rename the debugfs file to "hpt_order"]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds the hypercall numbers and wrapper functions for the hash page
table resizing hypercalls.
These hypercall numbers are defined in the PAPR ACR "HPT resizing
option".
It also adds a new firmware feature flag to track the presence of the
HPT resizing calls.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The IPIs come in as HVI not EE, so we need to test the appropriate
SRR1 bits. The encoding is such that it won't have false positives
on P7 and P8 so we can just test it like that. We also need to handle
the icp-opal variant of the flush.
Fixes: d74361881f ("powerpc/xics: Add ICP OPAL backend")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Recent versions of OPAL can provide names for the various OPAL interrupts,
so let's use them. This also modernises the code that fetches the
interrupt array to use the helpers provided by the generic code instead
of hand-parsing the property.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Free irqs on error, check allocation of names, consolidate error
handling, whitespace.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On some CAPP errors we see console messages that prints unknown HMIs for
which CAPI recovery is in progress. This patch fixes this by printing
correct error info for HMI generated due to CAPP recovery.
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Tested-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
All entry points already read the MSR so they can easily do
the right thing.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
As we add the ability to do DLPAR of additional devices through
the sysfs interface we need to know which devices are supported.
This adds the reporting of supported devices with a comma separated
list reported in the existing /sys/kernel/dlpar.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Extend the existing PRRN infrastructure to perform the actual affinity
updating for cpus and memory in addition to the device tree updating.
For cpus, dynamic affinity updating already appears to exist in the
kernel in the form of arch_update_cpu_topology(). For memory, we must
place a READD operation on the hotplug queue for any phandle included in
the PRRN event that is determined to be an LMB.
Signed-off-by: John Allen <jallen@linux.vnet.ibm.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently, memory must be hot removed and subsequently re-added in order
to dynamically update the affinity of LMBs specified by a PRRN event.
Earlier implementations of the PRRN event handler ran into issues in which
the hot remove would occur successfully, but a hotplug event would be
initiated from another source and grab the hotplug lock preventing the hot
add from occurring. To prevent this situation, this patch introduces the
notion of a hot "readd" action for memory which atomizes a hot remove and
a hot add into a single, serialized operation on the hotplug queue.
Signed-off-by: John Allen <jallen@linux.vnet.ibm.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When adding and removing LMBs we should make the acquire/release of
the DRC a separate step to allow for a few improvements. First
this will ensure that LMBs removed during a remove by count operation
are all available if a error occurs and we need to add them back. By
first removeing all the LMBs from the kernel before releasing their
DRCs the LMBs are available to add back should an error occur.
Also, this will allow for faster re-add operations of memory for
PRRN event handling since we can skip the unneeded step of having
to release the DRC and the acquire it back.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: John Allen <jallen@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We added support for HAVE_CONTEXT_TRACKING, but placed the option inside
PPC_PSERIES.
This has the undesirable effect that NO_HZ_FULL can be enabled on a
kernel with both powernv and pseries support, but cannot on a kernel
with powernv only support.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
opal_lpc_init() is called from an __init routine, and calls other __init
routines, so should also be __init, init?
Fixes: 023b13a501 ("powerpc/powernv: Add support for direct mapped LPC on POWER9")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
To use radix as a guest, we first need to tell the hypervisor via
the ibm,client-architecture call first that we support POWER9 and
architecture v3.00, and that we can do either radix or hash and
that we would like to choose later using an hcall (the
H_REGISTER_PROC_TBL hcall).
Then we need to check whether the hypervisor agreed to us using
radix. We need to do this very early on in the kernel boot process
before any of the MMU initialization is done. If the hypervisor
doesn't agree, we can't use radix and therefore clear the radix
MMU feature bit.
Later, when we have set up our process table, which points to the
radix tree for each process, we need to install that using the
H_REGISTER_PROC_TBL hcall.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This fixes the byte index values for some of the option bits in
the "ibm,architectur-vec-5" property. The "platform facilities options"
bits are in byte 17 not byte 14, so the upper 8 bits of their
definitions need to be 0x11 not 0x0E. The "sub processor support" option
is in byte 21 not byte 15.
Note none of these options are actually looked up in
"ibm,architecture-vec-5" at this time, so there is no bug.
When checking whether option bits are set, we should check that
the offset of the byte being checked is less than the vector
length that we got from the hypervisor.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use the new non-PCI ISA bridge support to expose the POWER9
LPC bus as direct mapped via the ISA IO port range. This
enables direct access via drivers such as 8250
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We'll be adding non-PCI isa bridge support so let's not
have all the definition in pci-bridge.h
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The power9_idle_stop method currently takes only the requested stop
level as a parameter and picks up the rest of the PSSCR bits from a
hand-coded macro. This is not a very flexible design, especially when
the firmware has the capability to communicate the psscr value and the
mask associated with a particular stop state via device tree.
This patch modifies the power9_idle_stop API to take as parameters the
PSSCR value and the PSSCR mask corresponding to the stop state that
needs to be set. These PSSCR value and mask are respectively obtained
by parsing the "ibm,cpu-idle-state-psscr" and
"ibm,cpu-idle-state-psscr-mask" fields from the device tree.
In addition to this, the patch adds support for handling stop states
for which ESL and EC bits in the PSSCR are zero. As per the
architecture, a wakeup from these stop states resumes execution from
the subsequent instruction as opposed to waking up at the System
Vector.
The older firmware sets only the Requested Level (RL) field in the
psscr and psscr-mask exposed in the device tree. For older firmware
where psscr-mask=0xf, this patch will set the default sane values that
the set for for remaining PSSCR fields (i.e PSLL, MTL, ESL, EC, and
TR). For the new firmware, the patch will validate that the invariants
required by the ISA for the psscr values are maintained by the
firmware.
This skiboot patch that exports fully populated PSSCR values and the
mask for all the stop states can be found here:
https://lists.ozlabs.org/pipermail/skiboot/2016-September/004869.html
[Optimize the number of instructions before entering STOP with
ESL=EC=0, validate the PSSCR values provided by the firimware
maintains the invariants required as per the ISA suggested by Balbir
Singh]
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Balbir pointed out that the name of the function pnv_arch300_idle_init
was inconsistent with the names of the variables and functions
pertaining to POWER9 features in book3s_idle.S.
This patch renames pnv_arch300_idle_init to pnv_power9_idle_init.
This patch does not change any behaviour.
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add detection of NPU2 PHBs. NPU2/NVLink2 has a different register
layout for the TCE kill register therefore TCE invalidation should be
done via the OPAL call rather than using the register directly as it
is for PHB3 and NVLink1. This changes TCE invalidation to use the OPAL
call in the case of a NPU2 PHB model.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
POWER9 contains an off core mmu called the nest mmu (NMMU). This is
used by other hardware units on the chip to translate virtual
addresses into real addresses. The unit attempting an address
translation provides the majority of the context required for the
translation request except for the base address of the partition table
(ie. the PTCR) which needs to be programmed into the NMMU.
This patch adds a call to OPAL to set the PTCR for the nest mmu in
opal_init().
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch has been reworked since RFC version. In the RFC, this patch
was preceded by a patch clearing MSR RI for all PPC32 at all time at
exception prologs. Now MSR RI clearing is done only when this 8xx perf
events functionality is compiled in, it is therefore limited to 8xx
and merged inside this patch.
Other main changes have been to take into account detailed review from
Peter Zijlstra. The instructions counter has been reworked to behave
as a free running counter like the three other counters.
The 8xx has no PMU, however some events can be emulated by other means.
This patch implements the following events (as reported by 'perf list'):
cpu-cycles OR cycles [Hardware event]
instructions [Hardware event]
dTLB-load-misses [Hardware cache event]
iTLB-load-misses [Hardware cache event]
'cycles' event is implemented using the timebase clock. Timebase clock
corresponds to CPU clock divided by 16, so number of cycles is
approximatly 16 times the number of TB ticks
On the 8xx, TLB misses are handled by software. It is therefore
easy to count all TLB misses each time the TLB miss exception is
called.
'instructions' is calculated by using instruction watchpoint counter.
This patch sets counter A to count instructions at address greater
than 0, hence we count all instructions executed while MSR RI bit is
set. The counter is set to the maximum which is 0xffff. Every 65535
instructions, debug instruction breakpoint exception fires. The
exception handler increments a counter in memory which then
represent the upper part of the instruction counter. We therefore
end up with a 48 bits counter. In order to avoid unnecessary overhead
while no perf event is active, this counter is started when the first
event referring to this counter is added, and the counter is stopped
when the last event referring to it is deleted. In order to properly
support breakpoint exceptions, MSR RI bit has to be unset in exception
epilogs in order to avoid breakpoint exceptions during critical
sections during changes to SRR0 and SRR1 would be problematic.
All counters are handled as free running counters.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <oss@buserror.net>
This board is built around Freescale's T1040 SoC.
The peripherals used by this design are:
- DDR3 RAM with SPD support
- parallel NOR Flash as boot medium
- 1 PCIe bus (PCIe1 x1)
- 3 FMAN Ethernet devices (FMAN1 DTSEC1/2/5)
- 4 IFC bus devices:
- NOR flash
- NAND flash
- QRIO reset/power mgmt CPLD
- BFTIC chassis management CPLD
- 2 I2C buses
- 1 SPI bus
- HDLC bus with the QE's UCC1
- last but not least, the mandatory serial port
The board can be used with the corenet32_smp_defconfig.
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Add a diu_ops implementation for t1042rdb.
Signed-off-by: Jason Jin <jason.jin@nxp.com>
[Meng Yi: Made file t1042rdb-specific]
Signed-off-by: Meng Yi <meng.yi@nxp.com>
[scottwood: clean up commit message]
Signed-off-by: Scott Wood <oss@buserror.net>
Use kmalloc_array(), which checks for overflow of the multiplication,
rather than doing it by hand.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The OPAL memory console is reported to be size zero, as we do not
initialise the struct attr with any size information due to the size
being variable. This leads users to think that the console is empty.
Instead report the maximum size.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Some but not all architectures provide set_dma_ops(). Move dma_ops
from struct dev_archdata into struct device such that it becomes
possible on all architectures to configure dma_ops per device.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-arch@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Russell King <linux@armlinux.org.uk>
Cc: x86@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
This was entirely automated, using the script by Al:
PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)
to do the replacement at the end of the merge window.
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The fsl/fman drivers will use of_platform_populate() on all
supported platforms. Call of_platform_populate() to probe the
FMan sub-nodes.
Signed-off-by: Igal Liberman <igal.liberman@freescale.com>
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Highlights include:
- Support for the kexec_file_load() syscall, which is a prereq for secure and
trusted boot.
- Prevent kernel execution of userspace on P9 Radix (similar to SMEP/PXN).
- Sort the exception tables at build time, to save time at boot, and store
them as relative offsets to save space in the kernel image & memory.
- Allow building the kernel with thin archives, which should allow us to build
an allyesconfig once some other fixes land.
- Build fixes to allow us to correctly rebuild when changing the kernel endian
from big to little or vice versa.
- Plumbing so that we can avoid doing a full mm TLB flush on P9 Radix.
- Initial stack protector support (-fstack-protector).
- Support for dumping the radix (aka. Linux) and hash page tables via debugfs.
- Fix an oops in cxl coredump generation when cxl_get_fd() is used.
- Freescale updates from Scott: "Highlights include 8xx hugepage support,
qbman fixes/cleanup, device tree updates, and some misc cleanup."
- Many and varied fixes and minor enhancements as always.
Thanks to:
Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Anshuman Khandual,
Anton Blanchard, Balbir Singh, Bartlomiej Zolnierkiewicz, Christophe Jaillet,
Christophe Leroy, Denis Kirjanov, Elimar Riesebieter, Frederic Barrat,
Gautham R. Shenoy, Geliang Tang, Geoff Levand, Jack Miller, Johan Hovold,
Lars-Peter Clausen, Libin, Madhavan Srinivasan, Michael Neuling, Nathan
Fontenot, Naveen N. Rao, Nicholas Piggin, Pan Xinhui, Peter Senna Tschudin,
Rashmica Gupta, Rui Teng, Russell Currey, Scott Wood, Simon Guo, Suraj
Jitindar Singh, Thiago Jung Bauermann, Tobias Klauser, Vaibhav Jain.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=xOzf
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Highlights include:
- Support for the kexec_file_load() syscall, which is a prereq for
secure and trusted boot.
- Prevent kernel execution of userspace on P9 Radix (similar to
SMEP/PXN).
- Sort the exception tables at build time, to save time at boot, and
store them as relative offsets to save space in the kernel image &
memory.
- Allow building the kernel with thin archives, which should allow us
to build an allyesconfig once some other fixes land.
- Build fixes to allow us to correctly rebuild when changing the
kernel endian from big to little or vice versa.
- Plumbing so that we can avoid doing a full mm TLB flush on P9
Radix.
- Initial stack protector support (-fstack-protector).
- Support for dumping the radix (aka. Linux) and hash page tables via
debugfs.
- Fix an oops in cxl coredump generation when cxl_get_fd() is used.
- Freescale updates from Scott: "Highlights include 8xx hugepage
support, qbman fixes/cleanup, device tree updates, and some misc
cleanup."
- Many and varied fixes and minor enhancements as always.
Thanks to:
Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Anshuman
Khandual, Anton Blanchard, Balbir Singh, Bartlomiej Zolnierkiewicz,
Christophe Jaillet, Christophe Leroy, Denis Kirjanov, Elimar
Riesebieter, Frederic Barrat, Gautham R. Shenoy, Geliang Tang, Geoff
Levand, Jack Miller, Johan Hovold, Lars-Peter Clausen, Libin,
Madhavan Srinivasan, Michael Neuling, Nathan Fontenot, Naveen N.
Rao, Nicholas Piggin, Pan Xinhui, Peter Senna Tschudin, Rashmica
Gupta, Rui Teng, Russell Currey, Scott Wood, Simon Guo, Suraj
Jitindar Singh, Thiago Jung Bauermann, Tobias Klauser, Vaibhav Jain"
[ And thanks to Michael, who took time off from a new baby to get this
pull request done. - Linus ]
* tag 'powerpc-4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (174 commits)
powerpc/fsl/dts: add FMan node for t1042d4rdb
powerpc/fsl/dts: add sg_2500_aqr105_phy4 alias on t1024rdb
powerpc/fsl/dts: add QMan and BMan nodes on t1024
powerpc/fsl/dts: add QMan and BMan nodes on t1023
soc/fsl/qman: test: use DEFINE_SPINLOCK()
powerpc/fsl-lbc: use DEFINE_SPINLOCK()
powerpc/8xx: Implement support of hugepages
powerpc: get hugetlbpage handling more generic
powerpc: port 64 bits pgtable_cache to 32 bits
powerpc/boot: Request no dynamic linker for boot wrapper
soc/fsl/bman: Use resource_size instead of computation
soc/fsl/qe: use builtin_platform_driver
powerpc/fsl_pmc: use builtin_platform_driver
powerpc/83xx/suspend: use builtin_platform_driver
powerpc/ftrace: Fix the comments for ftrace_modify_code
powerpc/perf: macros for power9 format encoding
powerpc/perf: power9 raw event format encoding
powerpc/perf: update attribute_group data structure
powerpc/perf: factor out the event format field
powerpc/mm/iommu, vfio/spapr: Put pages on VFIO container shutdown
...
o STM can hook into the function tracer
o Function filtering now supports more advance glob matching
o Ftrace selftests updates and added tests
o Softirq tag in traces now show only softirqs
o ARM nop added to non traced locations at compile time
o New trace_marker_raw file that allows for binary input
o Optimizations to the ring buffer
o Removal of kmap in trace_marker
o Wakeup and irqsoff tracers now adhere to the set_graph_notrace file
o Other various fixes and clean ups
Note, there are two patches marked for stable. These were discovered
near the end of the 4.9 rc release cycle. By the time I had them tested
it was just a matter of days before 4.9 would be released, and I
figured I would just submit them in the merge window. They are old
bugs and not critical. Nothing non-root could abuse.
-----BEGIN PGP SIGNATURE-----
iQExBAABCAAbBQJYUrFHFBxyb3N0ZWR0QGdvb2RtaXMub3JnAAoJEMm5BfJq2Y3L
2+AIAIr20kSQV/nA5htGAeCTobVk3WUxY6bvjd9mIJDKPP19akNLyREW0G3KnfCr
yhx4aFRZG98fRu/6F8qieRosyN36lADDVYHelMFHMpcTOpE2aZGjaaOuNGxOEA9v
FmMPTX+K3+dzKyFP4l68R3+5JuQ1/AqLTioTWeLW8IDQ2OOVsjD8+0BuXrNKMJDY
o6U4Hk5U/vn+zHc6BmgBzloAXemBd7iJ1t5V3FRRGvm8yv3HU85Twc5ofGeYTWvB
J8PboEywRlIzxg0Kd8mxnMI5PgaKZSEc2ub8E7cY/CZ5PYpDE2xDA2hJmJgfYp00
1VW+DHRpRZfElsCcya6S6P4bs5Y=
=MGZ/
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"This release has a few updates:
- STM can hook into the function tracer
- Function filtering now supports more advance glob matching
- Ftrace selftests updates and added tests
- Softirq tag in traces now show only softirqs
- ARM nop added to non traced locations at compile time
- New trace_marker_raw file that allows for binary input
- Optimizations to the ring buffer
- Removal of kmap in trace_marker
- Wakeup and irqsoff tracers now adhere to the set_graph_notrace file
- Other various fixes and clean ups"
* tag 'trace-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (42 commits)
selftests: ftrace: Shift down default message verbosity
kprobes/trace: Fix kprobe selftest for newer gcc
tracing/kprobes: Add a helper method to return number of probe hits
tracing/rb: Init the CPU mask on allocation
tracing: Use SOFTIRQ_OFFSET for softirq dectection for more accurate results
tracing/fgraph: Have wakeup and irqsoff tracers ignore graph functions too
fgraph: Handle a case where a tracer ignores set_graph_notrace
tracing: Replace kmap with copy_from_user() in trace_marker writing
ftrace/x86_32: Set ftrace_stub to weak to prevent gcc from using short jumps to it
tracing: Allow benchmark to be enabled at early_initcall()
tracing: Have system enable return error if one of the events fail
tracing: Do not start benchmark on boot up
tracing: Have the reg function allow to fail
ring-buffer: Force rb_end_commit() and rb_set_commit_to_write() inline
ring-buffer: Froce rb_update_write_stamp() to be inlined
ring-buffer: Force inline of hotpath helper functions
tracing: Make __buffer_unlock_commit() always_inline
tracing: Make tracepoint_printk a static_key
ring-buffer: Always inline rb_event_data()
ring-buffer: Make rb_reserve_next_event() always inlined
...
Every single user of vmf->virtual_address typed that entry to unsigned
long before doing anything with it so the type of virtual_address does
not really provide us any additional safety. Just use masked
vmf->address which already has the appropriate type.
Link: http://lkml.kernel.org/r/1479460644-25076-3-git-send-email-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
x86: userspace can now hide nested VMX features from guests; nested
VMX can now run Hyper-V in a guest; support for AVX512_4VNNIW and
AVX512_FMAPS in KVM; infrastructure support for virtual Intel GPUs.
PPC: support for KVM guests on POWER9; improved support for interrupt
polling; optimizations and cleanups.
s390: two small optimizations, more stuff is in flight and will be
in 4.11.
ARM: support for the GICv3 ITS on 32bit platforms.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQExBAABCAAbBQJYTkP0FBxwYm9uemluaUByZWRoYXQuY29tAAoJEL/70l94x66D
lZIH/iT1n9OQXcuTpYYnQhuCenzI3GZZOIMTbCvK2i5bo0FIJKxVn0EiAAqZSXvO
nO185FqjOgLuJ1AD1kJuxzye5suuQp4HIPWWgNHcexLuy43WXWKZe0IQlJ4zM2Xf
u31HakpFmVDD+Cd1qN3yDXtDrRQ79/xQn2kw7CWb8olp+pVqwbceN3IVie9QYU+3
gCz0qU6As0aQIwq2PyalOe03sO10PZlm4XhsoXgWPG7P18BMRhNLTDqhLhu7A/ry
qElVMANT7LSNLzlwNdpzdK8rVuKxETwjlc1UP8vSuhrwad4zM2JJ1Exk26nC2NaG
D0j4tRSyGFIdx6lukZm7HmiSHZ0=
=mkoB
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"Small release, the most interesting stuff is x86 nested virt
improvements.
x86:
- userspace can now hide nested VMX features from guests
- nested VMX can now run Hyper-V in a guest
- support for AVX512_4VNNIW and AVX512_FMAPS in KVM
- infrastructure support for virtual Intel GPUs.
PPC:
- support for KVM guests on POWER9
- improved support for interrupt polling
- optimizations and cleanups.
s390:
- two small optimizations, more stuff is in flight and will be in
4.11.
ARM:
- support for the GICv3 ITS on 32bit platforms"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (94 commits)
arm64: KVM: pmu: Reset PMSELR_EL0.SEL to a sane value before entering the guest
KVM: arm/arm64: timer: Check for properly initialized timer on init
KVM: arm/arm64: vgic-v2: Limit ITARGETSR bits to number of VCPUs
KVM: x86: Handle the kthread worker using the new API
KVM: nVMX: invvpid handling improvements
KVM: nVMX: check host CR3 on vmentry and vmexit
KVM: nVMX: introduce nested_vmx_load_cr3 and call it on vmentry
KVM: nVMX: propagate errors from prepare_vmcs02
KVM: nVMX: fix CR3 load if L2 uses PAE paging and EPT
KVM: nVMX: load GUEST_EFER after GUEST_CR0 during emulated VM-entry
KVM: nVMX: generate MSR_IA32_CR{0,4}_FIXED1 from guest CPUID
KVM: nVMX: fix checks on CR{0,4} during virtual VMX operation
KVM: nVMX: support restore of VMX capability MSRs
KVM: nVMX: generate non-true VMX MSRs based on true versions
KVM: x86: Do not clear RFLAGS.TF when a singlestep trap occurs.
KVM: x86: Add kvm_skip_emulated_instruction and use it.
KVM: VMX: Move skip_emulated_instruction out of nested_vmx_check_vmcs12
KVM: VMX: Reorder some skip_emulated_instruction calls
KVM: x86: Add a return value to kvm_emulate_cpuid
KVM: PPC: Book3S: Move prototypes for KVM functions into kvm_ppc.h
...
8xx uses a two level page table with two different linux page size
support (4k and 16k). 8xx also support two different hugepage sizes
512k and 8M. In order to support them on linux we define two different
page table layout.
The size of pages is in the PGD entry, using PS field (bits 28-29):
00 : Small pages (4k or 16k)
01 : 512k pages
10 : reserved
11 : 8M pages
For 512K hugepage size a pgd entry have the below format
[<hugepte address >0101] . The hugepte table allocated will contain 8
entries pointing to 512K huge pte in 4k pages mode and 64 entries in
16k pages mode.
For 8M in 16k mode, a pgd entry have the below format
[<hugepte address >1101] . The hugepte table allocated will contain 8
entries pointing to 8M huge pte.
For 8M in 4k mode, multiple pgd entries point to the same hugepte
address and pgd entry will have the below format
[<hugepte address>1101]. The hugepte table allocated will only have one
entry.
For the time being, we do not support CPU15 ERRATA when HUGETLB is
selected
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> (v3, for the generic bits)
Signed-off-by: Scott Wood <oss@buserror.net>
Some tracepoints have a registration function that gets enabled when the
tracepoint is enabled. There may be cases that the registraction function
must fail (for example, can't allocate enough memory). In this case, the
tracepoint should also fail to register, otherwise the user would not know
why the tracepoint is not working.
Cc: David Howells <dhowells@redhat.com>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Use builtin_platform_driver() helper to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Scott Wood <oss@buserror.net>
We have a bunch of Kconfig symbols which select various IBM_EMAC_*
symbols. These all cause warnings when IBM_EMAC is not selected.
eg.
warning: (PPC_CELL_NATIVE && BLUESTONE && CANYONLANDS && GLACIER &&
EIGER && 440EPX && 440GRX && 440GX && 460SX && 405EX) selects
IBM_EMAC_RGMII which has unmet direct dependencies (NETDEVICES &&
ETHERNET && NET_VENDOR_IBM)
So make them all depend on IBM_EMAC being enabled first.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
SPU_FS selects MEMORY_HOTPLUG, which is problematic because
MEMORY_HOTPLUG is user selectable, meaning we can end up with a broken
.config where MEMORY_HOTPLUG is enabled but its dependencies are not,
leading to build breakages.
The select of MEMORY_HOTPLUG for SPU_FS was added back in 2006, in
commit 4da30d15b6 ("[POWERPC] spufs: fix memory hotplug dependency").
However we reworked the spufs code and removed the dependency on memory
hotplug in 2007 in commit 78bde53e35 ("[POWERPC] spufs: remove need
for struct page for SPEs").
So drop the select as it's no longer needed and causes problems.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We should be using lmb_is_removable() to validate that enough LMBs
are available to remove when doing a remove by count. This will check
that the LMB is owned by the system and it is considered removable.
This patch also adds a pr_info() notification to report the LMB count
to remove was not satisfied.
What we do now is just check that there are enough LMBs owned by the
system when validating there are enough LMBs to remove. This can
lead to situations where there are enough LMBs owned by the system
but not enough that are considered removable. This results in having
to bail out of the remove operation instead of just failing the request
that we should have known wouldn't succeed.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 2965faa5e0 ("kexec: split kexec_load syscall from kexec core
code") introduced CONFIG_KEXEC_CORE so that CONFIG_KEXEC means whether
the kexec_load system call should be compiled-in and CONFIG_KEXEC_FILE
means whether the kexec_file_load system call should be compiled-in.
These options can be set independently from each other.
Since until now powerpc only supported kexec_load, CONFIG_KEXEC and
CONFIG_KEXEC_CORE were synonyms. That is not the case anymore, so we
need to make a distinction. Almost all places where CONFIG_KEXEC was
being used should be using CONFIG_KEXEC_CORE instead, since
kexec_file_load also needs that code compiled in.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The Xilinx interrupt controller driver is now available in drivers/irqchip.
Switch to using that driver.
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
There are no ibmebus driver that make use of legacy suspend/resume. This
patch removes the support for it from ibmebus framework, new ibmebus
driver (as unlikely as they are) wanting to use suspend/resume should
use dev_pm_ops.
Since there aren't any special bus specific things to do during
suspend/resume and since the PM core will automatically fallback
directly to using the device's PM ops if no bus PM ops are specified
there is no need to have any special ibmebus PM ops at all.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The QEMU e500 board needs to enable CONFIG_E500 to correctly boot. QEMU
for ppc64 uses e5500/e6500 emulation, thus CONFIG_PPC_E500MC is required
as well.
Signed-off-by: David Engraf <david.engraf@sysgo.com>
Signed-off-by: Scott Wood <oss@buserror.net>
This defines real-mode versions of opal_int_get_xirr(), opal_int_eoi()
and opal_int_set_mfrr(), for use by KVM real-mode code.
It also exports opal_int_set_mfrr() so that the modular part of KVM
can use it to send IPIs.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
PHB, PE (and by association MVE) numbers are printed as a mix of decimal
and hexadecimal throughout the kernel. This can be misleading, so make
them all hexadecimal.
Standardising on hex instead of dec because:
- PHB numbers are presented in hex in sysfs/debugfs (and lspci, etc)
- PE numbers are presented as hex in sysfs and parsed in hex in debugfs
The only place I think this could cause confusing are the messages during
boot, i.e.
pci 000a:01 : [PE# 000] Secondary bus 1 associated with PE#0
which can be a quick way to check PE numbers. pe_level_printk() will
only print two characters instead of three, so the above would be
pci 000a:01 : [PE# 00] Secondary bus 1 associated with PE#0
which gives a hint it's in hex.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Whenever a PE is initialised in powernv, opal_pci_eeh_freeze_clear() is
called. This is to remove any existing freeze, and has no negative side
effects if the PE is already in an unfrozen state. On PHB backends that
don't support this operation and return OPAL_UNSUPPORTED, this creates a
scary and misleading warning message.
Skip the warning message on init if OPAL_UNSUPPORTED is returned.
As far as I'm aware, this currently only affects NPUs.
Fixes: 313483d ("powerpc/powernv: Unfreeze PE on allocation")
Signed-off-by: Russell Currey <ruscur@russell.cc>
Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The IBMEBUS code supports the GX bus found on Power7 and earlier CPUs.
On Power8 it has been replaced, and so we have no need for it.
We don't actually have a config symbol for Power8 vs Power7 etc., but
we only support booting little endian on Power8 or later, so use that as
a reasonable approximation.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The pasrsing of data written to the dlpar file in sysfs does not correctly
account for the possibility of reading past the end of the buffer. The code
assumes that all pieces of the command witten to the sysfs file are present
in the form "<resource> <action> <id_type> <id>".
Correct this by updating the buffer parsing code to make a local copy and
use the strsep() and sysfs_streq() routines to parse the buffer. This patch
also separates the parsing code into subroutines for each piece of the
command.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently there's some CMO (Cooperative Memory Overcommit) code, in
plpar_wrappers.h. Some of it is #ifdef CONFIG_PSERIES and some of it
isn't. The end result being if a file includes plpar_wrappers.h it won't
build with CONFIG_PSERIES=n.
Fix it by moving the CMO code into platforms/pseries. The two hcall
wrappers can just be moved into their only caller, cmm.c, and the
accessors can go in pseries.h.
Note we need the accessors because cmm.c can be built as a module, so
there needs to be a split between the built-in code vs the module, and
that's achieved by using those accessors.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This changes the way that we support the new ISA v3.00 HPTE format.
Instead of adapting everything that uses HPTE values to handle either
the old format or the new format, depending on which CPU we are on,
we now convert explicitly between old and new formats if necessary
in the low-level routines that actually access HPTEs in memory.
This limits the amount of code that needs to know about the new
format and makes the conversions explicit. This is OK because the
old format contains all the information that is in the new format.
This also fixes operation under a hypervisor, because the H_ENTER
hypercall (and other hypercalls that deal with HPTEs) will continue
to require the HPTE value to be supplied in the old format. At
present the kernel will not boot in HPT mode on POWER9 under a
hypervisor.
This fixes and partially reverts commit 50de596de8
("powerpc/mm/hash: Add support for Power9 Hash", 2016-04-29).
Fixes: 50de596de8 ("powerpc/mm/hash: Add support for Power9 Hash")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Sukadev Bhattiprolu
Alexey Kardashevskiy
Arvind Yadav
Dan Carpenter
Nicholas Piggin
LABBE Corentin
Rashmica Gupta
Rob Herring
Michael Ellerman
Bhumika Goyal
Julia Lawall
Christophe Leroy
Shilpasri G Bhat
Nathan Fontenot
Gautham R. Shenoy
Matt Brown
Frederic Barrat
Benjamin Herrenschmidt
Sergei Shtylyov
Jeff Layton
Alistair Popple
Laurent Vivier
Anju T Sudhakar
Madhavan Srinivasan
Geliang Tang
Santosh Sivaraj
Linus Torvalds
David Howells
Aneesh Kumar K.V
Balbir Singh
Thiago Jung Bauermann
Christoph Hellwig
Hari Bathini
Russell Currey
Greg Kroah-Hartman
Colin Ian King
Michael Bringmann
Ivan Mikhaylov
Akshay Adiga
Sebastian Andrzej Siewior
Jeremy Kerr
Paolo Bonzini
Gavin Shan
Andrew Donnellan
Paul Mackerras
Tyrel Datwyler
Dan Williams
Yongji Xie
Yang Shi
Vipin K Parashar
Michael Neuling
Oliver O'Halloran
Tobin C. Harding
Michael Ellerman
Ingo Molnar
Masahiro Yamada
Dave Jiang
Sahil Mehta
Al Viro
Wei Yongjun
David Gibson
Mahesh Salgaonkar
John Allen
Anton Blanchard
Valentin Longchamp
Jason Jin
Markus Elfring
Joel Stanley
Bart Van Assche
Madalin Bucur
Jan Kara
Steven Rostedt (Red Hat)
Zubair Lutfullah Kakakhel
Lars-Peter Clausen
David Engraf