Commit Graph

5609 Commits

Author SHA1 Message Date
Linus Torvalds 223cdea4c4 Merge branch 'for-linus' of git://neil.brown.name/md
* 'for-linus' of git://neil.brown.name/md: (53 commits)
  md/raid5 revise rules for when to update metadata during reshape
  md/raid5: minor code cleanups in make_request.
  md: remove CONFIG_MD_RAID_RESHAPE config option.
  md/raid5: be more careful about write ordering when reshaping.
  md: don't display meaningless values in sysfs files resync_start and sync_speed
  md/raid5: allow layout and chunksize to be changed on active array.
  md/raid5: reshape using largest of old and new chunk size
  md/raid5: prepare for allowing reshape to change layout
  md/raid5: prepare for allowing reshape to change chunksize.
  md/raid5: clearly differentiate 'before' and 'after' stripes during reshape.
  Documentation/md.txt update
  md: allow number of drives in raid5 to be reduced
  md/raid5: change reshape-progress measurement to cope with reshaping backwards.
  md: add explicit method to signal the end of a reshape.
  md/raid5: enhance raid5_size to work correctly with negative delta_disks
  md/raid5: drop qd_idx from r6_state
  md/raid6: move raid6 data processing to raid6_pq.ko
  md: raid5 run(): Fix max_degraded for raid level 4.
  md: 'array_size' sysfs attribute
  md: centralize ->array_sectors modifications
  ...
2009-04-03 09:08:19 -07:00
Linus Torvalds 31e6e2dac5 Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] fix build-breaking 7a192ec commit
  ARM: Add SMSC911X support to Overo platform (V2)
  arm: update omap_ldp defconfig to use smsc911x
  arm: update realview defconfigs to use smsc911x
  arm: update pcm037 defconfig to use smsc911x
  arm: convert omap ldp platform to use smsc911x
  arm: convert realview platform to use smsc911x
  arm: convert pcm037 platform to use smsc911x
  [ARM] 5444/1: ARM: Realview: Fix event-device multiplicators in localtimer.c
  [ARM] 5442/1: pxa/cm-x255: fix reverse RDY gpios in PCMCIA driver
  [ARM] 5441/1: Use pr_err on error paths in at91 pm
  [ARM] 5440/1: Fix VFP state corruption due to preemption during VFP exceptions
  [ARM] 5439/1: Do not clear bit 10 of DFSR during abort handling on ARMv6
  [ARM] 5437/1: Add documentation for "nohlt" kernel parameter
  [ARM] 5436/1: ARM: OMAP: Fix compile for rx51
  [ARM] arch_reset() now takes a second parameter
  [ARM] Kirkwood: small L2 code cleanup
  [ARM] Kirkwood: invalidate L2 cache before enabling it
2009-04-03 09:05:40 -07:00
David Howells 9ae326a690 CacheFiles: A cache that backs onto a mounted filesystem
Add an FS-Cache cache-backend that permits a mounted filesystem to be used as a
backing store for the cache.

CacheFiles uses a userspace daemon to do some of the cache management - such as
reaping stale nodes and culling.  This is called cachefilesd and lives in
/sbin.  The source for the daemon can be downloaded from:

	http://people.redhat.com/~dhowells/cachefs/cachefilesd.c

And an example configuration from:

	http://people.redhat.com/~dhowells/cachefs/cachefilesd.conf

The filesystem and data integrity of the cache are only as good as those of the
filesystem providing the backing services.  Note that CacheFiles does not
attempt to journal anything since the journalling interfaces of the various
filesystems are very specific in nature.

CacheFiles creates a misc character device - "/dev/cachefiles" - that is used
to communication with the daemon.  Only one thing may have this open at once,
and whilst it is open, a cache is at least partially in existence.  The daemon
opens this and sends commands down it to control the cache.

CacheFiles is currently limited to a single cache.

CacheFiles attempts to maintain at least a certain percentage of free space on
the filesystem, shrinking the cache by culling the objects it contains to make
space if necessary - see the "Cache Culling" section.  This means it can be
placed on the same medium as a live set of data, and will expand to make use of
spare space and automatically contract when the set of data requires more
space.

============
REQUIREMENTS
============

The use of CacheFiles and its daemon requires the following features to be
available in the system and in the cache filesystem:

	- dnotify.

	- extended attributes (xattrs).

	- openat() and friends.

	- bmap() support on files in the filesystem (FIBMAP ioctl).

	- The use of bmap() to detect a partial page at the end of the file.

It is strongly recommended that the "dir_index" option is enabled on Ext3
filesystems being used as a cache.

=============
CONFIGURATION
=============

The cache is configured by a script in /etc/cachefilesd.conf.  These commands
set up cache ready for use.  The following script commands are available:

 (*) brun <N>%
 (*) bcull <N>%
 (*) bstop <N>%
 (*) frun <N>%
 (*) fcull <N>%
 (*) fstop <N>%

	Configure the culling limits.  Optional.  See the section on culling
	The defaults are 7% (run), 5% (cull) and 1% (stop) respectively.

	The commands beginning with a 'b' are file space (block) limits, those
	beginning with an 'f' are file count limits.

 (*) dir <path>

	Specify the directory containing the root of the cache.  Mandatory.

 (*) tag <name>

	Specify a tag to FS-Cache to use in distinguishing multiple caches.
	Optional.  The default is "CacheFiles".

 (*) debug <mask>

	Specify a numeric bitmask to control debugging in the kernel module.
	Optional.  The default is zero (all off).  The following values can be
	OR'd into the mask to collect various information:

		1	Turn on trace of function entry (_enter() macros)
		2	Turn on trace of function exit (_leave() macros)
		4	Turn on trace of internal debug points (_debug())

	This mask can also be set through sysfs, eg:

		echo 5 >/sys/modules/cachefiles/parameters/debug

==================
STARTING THE CACHE
==================

The cache is started by running the daemon.  The daemon opens the cache device,
configures the cache and tells it to begin caching.  At that point the cache
binds to fscache and the cache becomes live.

The daemon is run as follows:

	/sbin/cachefilesd [-d]* [-s] [-n] [-f <configfile>]

The flags are:

 (*) -d

	Increase the debugging level.  This can be specified multiple times and
	is cumulative with itself.

 (*) -s

	Send messages to stderr instead of syslog.

 (*) -n

	Don't daemonise and go into background.

 (*) -f <configfile>

	Use an alternative configuration file rather than the default one.

===============
THINGS TO AVOID
===============

Do not mount other things within the cache as this will cause problems.  The
kernel module contains its own very cut-down path walking facility that ignores
mountpoints, but the daemon can't avoid them.

Do not create, rename or unlink files and directories in the cache whilst the
cache is active, as this may cause the state to become uncertain.

Renaming files in the cache might make objects appear to be other objects (the
filename is part of the lookup key).

Do not change or remove the extended attributes attached to cache files by the
cache as this will cause the cache state management to get confused.

Do not create files or directories in the cache, lest the cache get confused or
serve incorrect data.

Do not chmod files in the cache.  The module creates things with minimal
permissions to prevent random users being able to access them directly.

=============
CACHE CULLING
=============

The cache may need culling occasionally to make space.  This involves
discarding objects from the cache that have been used less recently than
anything else.  Culling is based on the access time of data objects.  Empty
directories are culled if not in use.

Cache culling is done on the basis of the percentage of blocks and the
percentage of files available in the underlying filesystem.  There are six
"limits":

 (*) brun
 (*) frun

     If the amount of free space and the number of available files in the cache
     rises above both these limits, then culling is turned off.

 (*) bcull
 (*) fcull

     If the amount of available space or the number of available files in the
     cache falls below either of these limits, then culling is started.

 (*) bstop
 (*) fstop

     If the amount of available space or the number of available files in the
     cache falls below either of these limits, then no further allocation of
     disk space or files is permitted until culling has raised things above
     these limits again.

These must be configured thusly:

	0 <= bstop < bcull < brun < 100
	0 <= fstop < fcull < frun < 100

Note that these are percentages of available space and available files, and do
_not_ appear as 100 minus the percentage displayed by the "df" program.

The userspace daemon scans the cache to build up a table of cullable objects.
These are then culled in least recently used order.  A new scan of the cache is
started as soon as space is made in the table.  Objects will be skipped if
their atimes have changed or if the kernel module says it is still using them.

===============
CACHE STRUCTURE
===============

The CacheFiles module will create two directories in the directory it was
given:

 (*) cache/

 (*) graveyard/

The active cache objects all reside in the first directory.  The CacheFiles
kernel module moves any retired or culled objects that it can't simply unlink
to the graveyard from which the daemon will actually delete them.

The daemon uses dnotify to monitor the graveyard directory, and will delete
anything that appears therein.

The module represents index objects as directories with the filename "I..." or
"J...".  Note that the "cache/" directory is itself a special index.

Data objects are represented as files if they have no children, or directories
if they do.  Their filenames all begin "D..." or "E...".  If represented as a
directory, data objects will have a file in the directory called "data" that
actually holds the data.

Special objects are similar to data objects, except their filenames begin
"S..." or "T...".

If an object has children, then it will be represented as a directory.
Immediately in the representative directory are a collection of directories
named for hash values of the child object keys with an '@' prepended.  Into
this directory, if possible, will be placed the representations of the child
objects:

	INDEX     INDEX      INDEX                             DATA FILES
	========= ========== ================================= ================
	cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400
	cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400/@75/Es0g000w...DB1ry
	cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400/@75/Es0g000w...N22ry
	cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400/@75/Es0g000w...FP1ry

If the key is so long that it exceeds NAME_MAX with the decorations added on to
it, then it will be cut into pieces, the first few of which will be used to
make a nest of directories, and the last one of which will be the objects
inside the last directory.  The names of the intermediate directories will have
'+' prepended:

	J1223/@23/+xy...z/+kl...m/Epqr

Note that keys are raw data, and not only may they exceed NAME_MAX in size,
they may also contain things like '/' and NUL characters, and so they may not
be suitable for turning directly into a filename.

To handle this, CacheFiles will use a suitably printable filename directly and
"base-64" encode ones that aren't directly suitable.  The two versions of
object filenames indicate the encoding:

	OBJECT TYPE	PRINTABLE	ENCODED
	===============	===============	===============
	Index		"I..."		"J..."
	Data		"D..."		"E..."
	Special		"S..."		"T..."

Intermediate directories are always "@" or "+" as appropriate.

Each object in the cache has an extended attribute label that holds the object
type ID (required to distinguish special objects) and the auxiliary data from
the netfs.  The latter is used to detect stale objects in the cache and update
or retire them.

Note that CacheFiles will erase from the cache any file it doesn't recognise or
any file of an incorrect type (such as a FIFO file or a device file).

==========================
SECURITY MODEL AND SELINUX
==========================

CacheFiles is implemented to deal properly with the LSM security features of
the Linux kernel and the SELinux facility.

One of the problems that CacheFiles faces is that it is generally acting on
behalf of a process, and running in that process's context, and that includes a
security context that is not appropriate for accessing the cache - either
because the files in the cache are inaccessible to that process, or because if
the process creates a file in the cache, that file may be inaccessible to other
processes.

The way CacheFiles works is to temporarily change the security context (fsuid,
fsgid and actor security label) that the process acts as - without changing the
security context of the process when it the target of an operation performed by
some other process (so signalling and suchlike still work correctly).

When the CacheFiles module is asked to bind to its cache, it:

 (1) Finds the security label attached to the root cache directory and uses
     that as the security label with which it will create files.  By default,
     this is:

	cachefiles_var_t

 (2) Finds the security label of the process which issued the bind request
     (presumed to be the cachefilesd daemon), which by default will be:

	cachefilesd_t

     and asks LSM to supply a security ID as which it should act given the
     daemon's label.  By default, this will be:

	cachefiles_kernel_t

     SELinux transitions the daemon's security ID to the module's security ID
     based on a rule of this form in the policy.

	type_transition <daemon's-ID> kernel_t : process <module's-ID>;

     For instance:

	type_transition cachefilesd_t kernel_t : process cachefiles_kernel_t;

The module's security ID gives it permission to create, move and remove files
and directories in the cache, to find and access directories and files in the
cache, to set and access extended attributes on cache objects, and to read and
write files in the cache.

The daemon's security ID gives it only a very restricted set of permissions: it
may scan directories, stat files and erase files and directories.  It may
not read or write files in the cache, and so it is precluded from accessing the
data cached therein; nor is it permitted to create new files in the cache.

There are policy source files available in:

	http://people.redhat.com/~dhowells/fscache/cachefilesd-0.8.tar.bz2

and later versions.  In that tarball, see the files:

	cachefilesd.te
	cachefilesd.fc
	cachefilesd.if

They are built and installed directly by the RPM.

If a non-RPM based system is being used, then copy the above files to their own
directory and run:

	make -f /usr/share/selinux/devel/Makefile
	semodule -i cachefilesd.pp

You will need checkpolicy and selinux-policy-devel installed prior to the
build.

By default, the cache is located in /var/fscache, but if it is desirable that
it should be elsewhere, than either the above policy files must be altered, or
an auxiliary policy must be installed to label the alternate location of the
cache.

For instructions on how to add an auxiliary policy to enable the cache to be
located elsewhere when SELinux is in enforcing mode, please see:

	/usr/share/doc/cachefilesd-*/move-cache.txt

When the cachefilesd rpm is installed; alternatively, the document can be found
in the sources.

==================
A NOTE ON SECURITY
==================

CacheFiles makes use of the split security in the task_struct.  It allocates
its own task_security structure, and redirects current->act_as to point to it
when it acts on behalf of another process, in that process's context.

The reason it does this is that it calls vfs_mkdir() and suchlike rather than
bypassing security and calling inode ops directly.  Therefore the VFS and LSM
may deny the CacheFiles access to the cache data because under some
circumstances the caching code is running in the security context of whatever
process issued the original syscall on the netfs.

Furthermore, should CacheFiles create a file or directory, the security
parameters with that object is created (UID, GID, security label) would be
derived from that process that issued the system call, thus potentially
preventing other processes from accessing the cache - including CacheFiles's
cache management daemon (cachefilesd).

What is required is to temporarily override the security of the process that
issued the system call.  We can't, however, just do an in-place change of the
security data as that affects the process as an object, not just as a subject.
This means it may lose signals or ptrace events for example, and affects what
the process looks like in /proc.

So CacheFiles makes use of a logical split in the security between the
objective security (task->sec) and the subjective security (task->act_as).  The
objective security holds the intrinsic security properties of a process and is
never overridden.  This is what appears in /proc, and is what is used when a
process is the target of an operation by some other process (SIGKILL for
example).

The subjective security holds the active security properties of a process, and
may be overridden.  This is not seen externally, and is used whan a process
acts upon another object, for example SIGKILLing another process or opening a
file.

LSM hooks exist that allow SELinux (or Smack or whatever) to reject a request
for CacheFiles to run in a context of a specific security label, or to create
files and directories with another security label.

This documentation is added by the patch to:

	Documentation/filesystems/caching/cachefiles.txt

Signed-Off-By: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
2009-04-03 16:42:41 +01:00
David Howells 952efe7b78 FS-Cache: Add and document asynchronous operation handling
Add and document asynchronous operation handling for use by FS-Cache's data
storage and retrieval routines.

The following documentation is added to:

	Documentation/filesystems/caching/operations.txt

		       ================================
		       ASYNCHRONOUS OPERATIONS HANDLING
		       ================================

========
OVERVIEW
========

FS-Cache has an asynchronous operations handling facility that it uses for its
data storage and retrieval routines.  Its operations are represented by
fscache_operation structs, though these are usually embedded into some other
structure.

This facility is available to and expected to be be used by the cache backends,
and FS-Cache will create operations and pass them off to the appropriate cache
backend for completion.

To make use of this facility, <linux/fscache-cache.h> should be #included.

===============================
OPERATION RECORD INITIALISATION
===============================

An operation is recorded in an fscache_operation struct:

	struct fscache_operation {
		union {
			struct work_struct fast_work;
			struct slow_work slow_work;
		};
		unsigned long		flags;
		fscache_operation_processor_t processor;
		...
	};

Someone wanting to issue an operation should allocate something with this
struct embedded in it.  They should initialise it by calling:

	void fscache_operation_init(struct fscache_operation *op,
				    fscache_operation_release_t release);

with the operation to be initialised and the release function to use.

The op->flags parameter should be set to indicate the CPU time provision and
the exclusivity (see the Parameters section).

The op->fast_work, op->slow_work and op->processor flags should be set as
appropriate for the CPU time provision (see the Parameters section).

FSCACHE_OP_WAITING may be set in op->flags prior to each submission of the
operation and waited for afterwards.

==========
PARAMETERS
==========

There are a number of parameters that can be set in the operation record's flag
parameter.  There are three options for the provision of CPU time in these
operations:

 (1) The operation may be done synchronously (FSCACHE_OP_MYTHREAD).  A thread
     may decide it wants to handle an operation itself without deferring it to
     another thread.

     This is, for example, used in read operations for calling readpages() on
     the backing filesystem in CacheFiles.  Although readpages() does an
     asynchronous data fetch, the determination of whether pages exist is done
     synchronously - and the netfs does not proceed until this has been
     determined.

     If this option is to be used, FSCACHE_OP_WAITING must be set in op->flags
     before submitting the operation, and the operating thread must wait for it
     to be cleared before proceeding:

		wait_on_bit(&op->flags, FSCACHE_OP_WAITING,
			    fscache_wait_bit, TASK_UNINTERRUPTIBLE);

 (2) The operation may be fast asynchronous (FSCACHE_OP_FAST), in which case it
     will be given to keventd to process.  Such an operation is not permitted
     to sleep on I/O.

     This is, for example, used by CacheFiles to copy data from a backing fs
     page to a netfs page after the backing fs has read the page in.

     If this option is used, op->fast_work and op->processor must be
     initialised before submitting the operation:

		INIT_WORK(&op->fast_work, do_some_work);

 (3) The operation may be slow asynchronous (FSCACHE_OP_SLOW), in which case it
     will be given to the slow work facility to process.  Such an operation is
     permitted to sleep on I/O.

     This is, for example, used by FS-Cache to handle background writes of
     pages that have just been fetched from a remote server.

     If this option is used, op->slow_work and op->processor must be
     initialised before submitting the operation:

		fscache_operation_init_slow(op, processor)

Furthermore, operations may be one of two types:

 (1) Exclusive (FSCACHE_OP_EXCLUSIVE).  Operations of this type may not run in
     conjunction with any other operation on the object being operated upon.

     An example of this is the attribute change operation, in which the file
     being written to may need truncation.

 (2) Shareable.  Operations of this type may be running simultaneously.  It's
     up to the operation implementation to prevent interference between other
     operations running at the same time.

=========
PROCEDURE
=========

Operations are used through the following procedure:

 (1) The submitting thread must allocate the operation and initialise it
     itself.  Normally this would be part of a more specific structure with the
     generic op embedded within.

 (2) The submitting thread must then submit the operation for processing using
     one of the following two functions:

	int fscache_submit_op(struct fscache_object *object,
			      struct fscache_operation *op);

	int fscache_submit_exclusive_op(struct fscache_object *object,
					struct fscache_operation *op);

     The first function should be used to submit non-exclusive ops and the
     second to submit exclusive ones.  The caller must still set the
     FSCACHE_OP_EXCLUSIVE flag.

     If successful, both functions will assign the operation to the specified
     object and return 0.  -ENOBUFS will be returned if the object specified is
     permanently unavailable.

     The operation manager will defer operations on an object that is still
     undergoing lookup or creation.  The operation will also be deferred if an
     operation of conflicting exclusivity is in progress on the object.

     If the operation is asynchronous, the manager will retain a reference to
     it, so the caller should put their reference to it by passing it to:

	void fscache_put_operation(struct fscache_operation *op);

 (3) If the submitting thread wants to do the work itself, and has marked the
     operation with FSCACHE_OP_MYTHREAD, then it should monitor
     FSCACHE_OP_WAITING as described above and check the state of the object if
     necessary (the object might have died whilst the thread was waiting).

     When it has finished doing its processing, it should call
     fscache_put_operation() on it.

 (4) The operation holds an effective lock upon the object, preventing other
     exclusive ops conflicting until it is released.  The operation can be
     enqueued for further immediate asynchronous processing by adjusting the
     CPU time provisioning option if necessary, eg:

	op->flags &= ~FSCACHE_OP_TYPE;
	op->flags |= ~FSCACHE_OP_FAST;

     and calling:

	void fscache_enqueue_operation(struct fscache_operation *op)

     This can be used to allow other things to have use of the worker thread
     pools.

=====================
ASYNCHRONOUS CALLBACK
=====================

When used in asynchronous mode, the worker thread pool will invoke the
processor method with a pointer to the operation.  This should then get at the
container struct by using container_of():

	static void fscache_write_op(struct fscache_operation *_op)
	{
		struct fscache_storage *op =
			container_of(_op, struct fscache_storage, op);
	...
	}

The caller holds a reference on the operation, and will invoke
fscache_put_operation() when the processor function returns.  The processor
function is at liberty to call fscache_enqueue_operation() or to take extra
references.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
2009-04-03 16:42:39 +01:00
David Howells 36c9559022 FS-Cache: Object management state machine
Implement the cache object management state machine.

The following documentation is added to illuminate the working of this state
machine.  It will also be added as:

	Documentation/filesystems/caching/object.txt

	     ====================================================
	     IN-KERNEL CACHE OBJECT REPRESENTATION AND MANAGEMENT
	     ====================================================

==============
REPRESENTATION
==============

FS-Cache maintains an in-kernel representation of each object that a netfs is
currently interested in.  Such objects are represented by the fscache_cookie
struct and are referred to as cookies.

FS-Cache also maintains a separate in-kernel representation of the objects that
a cache backend is currently actively caching.  Such objects are represented by
the fscache_object struct.  The cache backends allocate these upon request, and
are expected to embed them in their own representations.  These are referred to
as objects.

There is a 1:N relationship between cookies and objects.  A cookie may be
represented by multiple objects - an index may exist in more than one cache -
or even by no objects (it may not be cached).

Furthermore, both cookies and objects are hierarchical.  The two hierarchies
correspond, but the cookies tree is a superset of the union of the object trees
of multiple caches:

	    NETFS INDEX TREE               :      CACHE 1     :      CACHE 2
	                                   :                  :
	                                   :   +-----------+  :
	                          +----------->|  IObject  |  :
	      +-----------+       |        :   +-----------+  :
	      |  ICookie  |-------+        :         |        :
	      +-----------+       |        :         |        :   +-----------+
	            |             +------------------------------>|  IObject  |
	            |                      :         |        :   +-----------+
	            |                      :         V        :         |
	            |                      :   +-----------+  :         |
	            V             +----------->|  IObject  |  :         |
	      +-----------+       |        :   +-----------+  :         |
	      |  ICookie  |-------+        :         |        :         V
	      +-----------+       |        :         |        :   +-----------+
	            |             +------------------------------>|  IObject  |
	      +-----+-----+                :         |        :   +-----------+
	      |           |                :         |        :         |
	      V           |                :         V        :         |
	+-----------+     |                :   +-----------+  :         |
	|  ICookie  |------------------------->|  IObject  |  :         |
	+-----------+     |                :   +-----------+  :         |
	      |           V                :         |        :         V
	      |     +-----------+          :         |        :   +-----------+
	      |     |  ICookie  |-------------------------------->|  IObject  |
	      |     +-----------+          :         |        :   +-----------+
	      V           |                :         V        :         |
	+-----------+     |                :   +-----------+  :         |
	|  DCookie  |------------------------->|  DObject  |  :         |
	+-----------+     |                :   +-----------+  :         |
	                  |                :                  :         |
	          +-------+-------+        :                  :         |
	          |               |        :                  :         |
	          V               V        :                  :         V
	    +-----------+   +-----------+  :                  :   +-----------+
	    |  DCookie  |   |  DCookie  |------------------------>|  DObject  |
	    +-----------+   +-----------+  :                  :   +-----------+
	                                   :                  :

In the above illustration, ICookie and IObject represent indices and DCookie
and DObject represent data storage objects.  Indices may have representation in
multiple caches, but currently, non-index objects may not.  Objects of any type
may also be entirely unrepresented.

As far as the netfs API goes, the netfs is only actually permitted to see
pointers to the cookies.  The cookies themselves and any objects attached to
those cookies are hidden from it.

===============================
OBJECT MANAGEMENT STATE MACHINE
===============================

Within FS-Cache, each active object is managed by its own individual state
machine.  The state for an object is kept in the fscache_object struct, in
object->state.  A cookie may point to a set of objects that are in different
states.

Each state has an action associated with it that is invoked when the machine
wakes up in that state.  There are four logical sets of states:

 (1) Preparation: states that wait for the parent objects to become ready.  The
     representations are hierarchical, and it is expected that an object must
     be created or accessed with respect to its parent object.

 (2) Initialisation: states that perform lookups in the cache and validate
     what's found and that create on disk any missing metadata.

 (3) Normal running: states that allow netfs operations on objects to proceed
     and that update the state of objects.

 (4) Termination: states that detach objects from their netfs cookies, that
     delete objects from disk, that handle disk and system errors and that free
     up in-memory resources.

In most cases, transitioning between states is in response to signalled events.
When a state has finished processing, it will usually set the mask of events in
which it is interested (object->event_mask) and relinquish the worker thread.
Then when an event is raised (by calling fscache_raise_event()), if the event
is not masked, the object will be queued for processing (by calling
fscache_enqueue_object()).

PROVISION OF CPU TIME
---------------------

The work to be done by the various states is given CPU time by the threads of
the slow work facility (see Documentation/slow-work.txt).  This is used in
preference to the workqueue facility because:

 (1) Threads may be completely occupied for very long periods of time by a
     particular work item.  These state actions may be doing sequences of
     synchronous, journalled disk accesses (lookup, mkdir, create, setxattr,
     getxattr, truncate, unlink, rmdir, rename).

 (2) Threads may do little actual work, but may rather spend a lot of time
     sleeping on I/O.  This means that single-threaded and 1-per-CPU-threaded
     workqueues don't necessarily have the right numbers of threads.

LOCKING SIMPLIFICATION
----------------------

Because only one worker thread may be operating on any particular object's
state machine at once, this simplifies the locking, particularly with respect
to disconnecting the netfs's representation of a cache object (fscache_cookie)
from the cache backend's representation (fscache_object) - which may be
requested from either end.

=================
THE SET OF STATES
=================

The object state machine has a set of states that it can be in.  There are
preparation states in which the object sets itself up and waits for its parent
object to transit to a state that allows access to its children:

 (1) State FSCACHE_OBJECT_INIT.

     Initialise the object and wait for the parent object to become active.  In
     the cache, it is expected that it will not be possible to look an object
     up from the parent object, until that parent object itself has been looked
     up.

There are initialisation states in which the object sets itself up and accesses
disk for the object metadata:

 (2) State FSCACHE_OBJECT_LOOKING_UP.

     Look up the object on disk, using the parent as a starting point.
     FS-Cache expects the cache backend to probe the cache to see whether this
     object is represented there, and if it is, to see if it's valid (coherency
     management).

     The cache should call fscache_object_lookup_negative() to indicate lookup
     failure for whatever reason, and should call fscache_obtained_object() to
     indicate success.

     At the completion of lookup, FS-Cache will let the netfs go ahead with
     read operations, no matter whether the file is yet cached.  If not yet
     cached, read operations will be immediately rejected with ENODATA until
     the first known page is uncached - as to that point there can be no data
     to be read out of the cache for that file that isn't currently also held
     in the pagecache.

 (3) State FSCACHE_OBJECT_CREATING.

     Create an object on disk, using the parent as a starting point.  This
     happens if the lookup failed to find the object, or if the object's
     coherency data indicated what's on disk is out of date.  In this state,
     FS-Cache expects the cache to create

     The cache should call fscache_obtained_object() if creation completes
     successfully, fscache_object_lookup_negative() otherwise.

     At the completion of creation, FS-Cache will start processing write
     operations the netfs has queued for an object.  If creation failed, the
     write ops will be transparently discarded, and nothing recorded in the
     cache.

There are some normal running states in which the object spends its time
servicing netfs requests:

 (4) State FSCACHE_OBJECT_AVAILABLE.

     A transient state in which pending operations are started, child objects
     are permitted to advance from FSCACHE_OBJECT_INIT state, and temporary
     lookup data is freed.

 (5) State FSCACHE_OBJECT_ACTIVE.

     The normal running state.  In this state, requests the netfs makes will be
     passed on to the cache.

 (6) State FSCACHE_OBJECT_UPDATING.

     The state machine comes here to update the object in the cache from the
     netfs's records.  This involves updating the auxiliary data that is used
     to maintain coherency.

And there are terminal states in which an object cleans itself up, deallocates
memory and potentially deletes stuff from disk:

 (7) State FSCACHE_OBJECT_LC_DYING.

     The object comes here if it is dying because of a lookup or creation
     error.  This would be due to a disk error or system error of some sort.
     Temporary data is cleaned up, and the parent is released.

 (8) State FSCACHE_OBJECT_DYING.

     The object comes here if it is dying due to an error, because its parent
     cookie has been relinquished by the netfs or because the cache is being
     withdrawn.

     Any child objects waiting on this one are given CPU time so that they too
     can destroy themselves.  This object waits for all its children to go away
     before advancing to the next state.

 (9) State FSCACHE_OBJECT_ABORT_INIT.

     The object comes to this state if it was waiting on its parent in
     FSCACHE_OBJECT_INIT, but its parent died.  The object will destroy itself
     so that the parent may proceed from the FSCACHE_OBJECT_DYING state.

(10) State FSCACHE_OBJECT_RELEASING.
(11) State FSCACHE_OBJECT_RECYCLING.

     The object comes to one of these two states when dying once it is rid of
     all its children, if it is dying because the netfs relinquished its
     cookie.  In the first state, the cached data is expected to persist, and
     in the second it will be deleted.

(12) State FSCACHE_OBJECT_WITHDRAWING.

     The object transits to this state if the cache decides it wants to
     withdraw the object from service, perhaps to make space, but also due to
     error or just because the whole cache is being withdrawn.

(13) State FSCACHE_OBJECT_DEAD.

     The object transits to this state when the in-memory object record is
     ready to be deleted.  The object processor shouldn't ever see an object in
     this state.

THE SET OF EVENTS
-----------------

There are a number of events that can be raised to an object state machine:

 (*) FSCACHE_OBJECT_EV_UPDATE

     The netfs requested that an object be updated.  The state machine will ask
     the cache backend to update the object, and the cache backend will ask the
     netfs for details of the change through its cookie definition ops.

 (*) FSCACHE_OBJECT_EV_CLEARED

     This is signalled in two circumstances:

     (a) when an object's last child object is dropped and

     (b) when the last operation outstanding on an object is completed.

     This is used to proceed from the dying state.

 (*) FSCACHE_OBJECT_EV_ERROR

     This is signalled when an I/O error occurs during the processing of some
     object.

 (*) FSCACHE_OBJECT_EV_RELEASE
 (*) FSCACHE_OBJECT_EV_RETIRE

     These are signalled when the netfs relinquishes a cookie it was using.
     The event selected depends on whether the netfs asks for the backing
     object to be retired (deleted) or retained.

 (*) FSCACHE_OBJECT_EV_WITHDRAW

     This is signalled when the cache backend wants to withdraw an object.
     This means that the object will have to be detached from the netfs's
     cookie.

Because the withdrawing releasing/retiring events are all handled by the object
state machine, it doesn't matter if there's a collision with both ends trying
to sever the connection at the same time.  The state machine can just pick
which one it wants to honour, and that effects the other.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
2009-04-03 16:42:38 +01:00
David Howells 7394daa8c6 FS-Cache: Add use of /proc and presentation of statistics
Make FS-Cache create its /proc interface and present various statistical
information through it.  Also provide the functions for updating this
information.

These features are enabled by:

	CONFIG_FSCACHE_PROC
	CONFIG_FSCACHE_STATS
	CONFIG_FSCACHE_HISTOGRAM

The /proc directory for FS-Cache is also exported so that caching modules can
add their own statistics there too.

The FS-Cache module is loadable at this point, and the statistics files can be
examined by userspace:

	cat /proc/fs/fscache/stats
	cat /proc/fs/fscache/histogram

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
2009-04-03 16:42:37 +01:00
David Howells 0dfc41d1ef FS-Cache: Add the FS-Cache cache backend API and documentation
Add the API for a generic facility (FS-Cache) by which caches may declare them
selves open for business, and may obtain work to be done from network
filesystems.  The header file is included by:

	#include <linux/fscache-cache.h>

Documentation for the API is also added to:

	Documentation/filesystems/caching/backend-api.txt

This API is not usable without the implementation of the utility functions
which will be added in further patches.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
2009-04-03 16:42:36 +01:00
David Howells 2d6fff6370 FS-Cache: Add the FS-Cache netfs API and documentation
Add the API for a generic facility (FS-Cache) by which filesystems (such as AFS
or NFS) may call on local caching capabilities without having to know anything
about how the cache works, or even if there is a cache:

	+---------+
	|         |                        +--------------+
	|   NFS   |--+                     |              |
	|         |  |                 +-->|   CacheFS    |
	+---------+  |   +----------+  |   |  /dev/hda5   |
	             |   |          |  |   +--------------+
	+---------+  +-->|          |  |
	|         |      |          |--+
	|   AFS   |----->| FS-Cache |
	|         |      |          |--+
	+---------+  +-->|          |  |
	             |   |          |  |   +--------------+
	+---------+  |   +----------+  |   |              |
	|         |  |                 +-->|  CacheFiles  |
	|  ISOFS  |--+                     |  /var/cache  |
	|         |                        +--------------+
	+---------+

General documentation and documentation of the netfs specific API are provided
in addition to the header files.

As this patch stands, it is possible to build a filesystem against the facility
and attempt to use it.  All that will happen is that all requests will be
immediately denied as if no cache is present.

Further patches will implement the core of the facility.  The facility will
transfer requests from networking filesystems to appropriate caches if
possible, or else gracefully deny them.

If this facility is disabled in the kernel configuration, then all its
operations will trivially reduce to nothing during compilation.

WHY NOT I_MAPPING?
==================

I have added my own API to implement caching rather than using i_mapping to do
this for a number of reasons.  These have been discussed a lot on the LKML and
CacheFS mailing lists, but to summarise the basics:

 (1) Most filesystems don't do hole reportage.  Holes in files are treated as
     blocks of zeros and can't be distinguished otherwise, making it difficult
     to distinguish blocks that have been read from the network and cached from
     those that haven't.

 (2) The backing inode must be fully populated before being exposed to
     userspace through the main inode because the VM/VFS goes directly to the
     backing inode and does not interrogate the front inode's VM ops.

     Therefore:

     (a) The backing inode must fit entirely within the cache.

     (b) All backed files currently open must fit entirely within the cache at
     	 the same time.

     (c) A working set of files in total larger than the cache may not be
     	 cached.

     (d) A file may not grow larger than the available space in the cache.

     (e) A file that's open and cached, and remotely grows larger than the
     	 cache is potentially stuffed.

 (3) Writes go to the backing filesystem, and can only be transferred to the
     network when the file is closed.

 (4) There's no record of what changes have been made, so the whole file must
     be written back.

 (5) The pages belong to the backing filesystem, and all metadata associated
     with that page are relevant only to the backing filesystem, and not
     anything stacked atop it.

OVERVIEW
========

FS-Cache provides (or will provide) the following facilities:

 (1) Caches can be added / removed at any time, even whilst in use.

 (2) Adds a facility by which tags can be used to refer to caches, even if
     they're not available yet.

 (3) More than one cache can be used at once.  Caches can be selected
     explicitly by use of tags.

 (4) The netfs is provided with an interface that allows either party to
     withdraw caching facilities from a file (required for (1)).

 (5) A netfs may annotate cache objects that belongs to it.  This permits the
     storage of coherency maintenance data.

 (6) Cache objects will be pinnable and space reservations will be possible.

 (7) The interface to the netfs returns as few errors as possible, preferring
     rather to let the netfs remain oblivious.

 (8) Cookies are used to represent indices, files and other objects to the
     netfs.  The simplest cookie is just a NULL pointer - indicating nothing
     cached there.

 (9) The netfs is allowed to propose - dynamically - any index hierarchy it
     desires, though it must be aware that the index search function is
     recursive, stack space is limited, and indices can only be children of
     indices.

(10) Indices can be used to group files together to reduce key size and to make
     group invalidation easier.  The use of indices may make lookup quicker,
     but that's cache dependent.

(11) Data I/O is effectively done directly to and from the netfs's pages.  The
     netfs indicates that page A is at index B of the data-file represented by
     cookie C, and that it should be read or written.  The cache backend may or
     may not start I/O on that page, but if it does, a netfs callback will be
     invoked to indicate completion.  The I/O may be either synchronous or
     asynchronous.

(12) Cookies can be "retired" upon release.  At this point FS-Cache will mark
     them as obsolete and the index hierarchy rooted at that point will get
     recycled.

(13) The netfs provides a "match" function for index searches.  In addition to
     saying whether a match was made or not, this can also specify that an
     entry should be updated or deleted.

FS-Cache maintains a virtual index tree in which all indices, files, objects
and pages are kept.  Bits of this tree may actually reside in one or more
caches.

                                           FSDEF
                                             |
                        +------------------------------------+
                        |                                    |
                       NFS                                  AFS
                        |                                    |
           +--------------------------+                +-----------+
           |                          |                |           |
        homedir                     mirror          afs.org   redhat.com
           |                          |                            |
     +------------+           +---------------+              +----------+
     |            |           |               |              |          |
   00001        00002       00007           00125        vol00001   vol00002
     |            |           |               |                         |
 +---+---+     +-----+      +---+      +------+------+            +-----+----+
 |   |   |     |     |      |   |      |      |      |            |     |    |
PG0 PG1 PG2   PG0  XATTR   PG0 PG1   DIRENT DIRENT DIRENT        R/W   R/O  Bak
                     |                                            |
                    PG0                                       +-------+
                                                              |       |
                                                            00001   00003
                                                              |
                                                          +---+---+
                                                          |   |   |
                                                         PG0 PG1 PG2

In the example above, two netfs's can be seen to be backed: NFS and AFS.  These
have different index hierarchies:

 (*) The NFS primary index will probably contain per-server indices.  Each
     server index is indexed by NFS file handles to get data file objects.
     Each data file objects can have an array of pages, but may also have
     further child objects, such as extended attributes and directory entries.
     Extended attribute objects themselves have page-array contents.

 (*) The AFS primary index contains per-cell indices.  Each cell index contains
     per-logical-volume indices.  Each of volume index contains up to three
     indices for the read-write, read-only and backup mirrors of those volumes.
     Each of these contains vnode data file objects, each of which contains an
     array of pages.

The very top index is the FS-Cache master index in which individual netfs's
have entries.

Any index object may reside in more than one cache, provided it only has index
children.  Any index with non-index object children will be assumed to only
reside in one cache.

The FS-Cache overview can be found in:

	Documentation/filesystems/caching/fscache.txt

The netfs API to FS-Cache can be found in:

	Documentation/filesystems/caching/netfs-api.txt

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
2009-04-03 16:42:36 +01:00
David Howells 8f0aa2f25b Document the slow work thread pool
Document the slow work thread pool.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
2009-04-03 16:42:35 +01:00
Leubner, Achim d8e9650765 [SCSI] aacraid driver update
changes:

- set aac_cache=2 as default value to avoid performance problem
  (Novell bugzilla #469922)

- Dell/PERC controller boot problem fixed (RedHat bugzilla #457552)

- WWN flag added to fix SLES10 SP1/SP2 drive detection problems

- 64-bit support changes

- DECLARE_PCI_DEVICE_TABLE macro added

- controller type changes

Signed-off-by: Achim Leubner <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03 09:23:11 -05:00
Linus Torvalds ef8a97bbc9 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (54 commits)
  glge: remove unused #include <version.h>
  dnet: remove unused #include <version.h>
  tcp: miscounts due to tcp_fragment pcount reset
  tcp: add helper for counter tweaking due mid-wq change
  hso: fix for the 'invalid frame length' messages
  hso: fix for crash when unplugging the device
  fsl_pq_mdio: Fix compile failure
  fsl_pq_mdio: Revive UCC MDIO support
  ucc_geth: Pass proper device to DMA routines, otherwise oops happens
  i.MX31: Fixing cs89x0 network building to i.MX31ADS
  tc35815: Fix build error if NAPI enabled
  hso: add Vendor/Product ID's for new devices
  ucc_geth: Remove unused header
  gianfar: Remove unused header
  kaweth: Fix locking to be SMP-safe
  net: allow multiple dev per napi with GRO
  r8169: reset IntrStatus after chip reset
  ixgbe: Fix potential memory leak/driver panic issue while setting up Tx & Rx ring parameters
  ixgbe: fix ethtool -A|a behavior
  ixgbe: Patch to fix driver panic while freeing up tx & rx resources
  ...
2009-04-02 21:05:30 -07:00
KAMEZAWA Hiroyuki 0b7f569e45 memcg: fix OOM killer under memcg
This patch tries to fix OOM Killer problems caused by hierarchy.
Now, memcg itself has OOM KILL function (in oom_kill.c) and tries to
kill a task in memcg.

But, when hierarchy is used, it's broken and correct task cannot
be killed. For example, in following cgroup

	/groupA/	hierarchy=1, limit=1G,
		01	nolimit
		02	nolimit
All tasks' memory usage under /groupA, /groupA/01, groupA/02 is limited to
groupA's 1Gbytes but OOM Killer just kills tasks in groupA.

This patch provides makes the bad process be selected from all tasks
under hierarchy. BTW, currently, oom_jiffies is updated against groupA
in above case. oom_jiffies of tree should be updated.

To see how oom_jiffies is used, please check mem_cgroup_oom_called()
callers.

[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: const fix]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:55 -07:00
Li Zefan b6719ec1ad cgroups: more documentation for remount and release_agent
This won't remove cpuacct from the mounted hierachy:
 # mount -t cgroup -o cpu,cpuacct xxx /mnt
 # mount -o remount,cpu /mnt

Because for this usage mount(8) will append the new options to the original
options.

And this will get you right:
 # mount [-t cgroup] -o remount,cpu xxx /mnt

Also document how to specify or change release_agent.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Reviewd-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:54 -07:00
KAMEZAWA Hiroyuki ec64f51545 cgroup: fix frequent -EBUSY at rmdir
In following situation, with memory subsystem,

	/groupA use_hierarchy==1
		/01 some tasks
		/02 some tasks
		/03 some tasks
		/04 empty

When tasks under 01/02/03 hit limit on /groupA, hierarchical reclaim
is triggered and the kernel walks tree under groupA. In this case,
rmdir /groupA/04 fails with -EBUSY frequently because of temporal
refcnt from the kernel.

In general. cgroup can be rmdir'd if there are no children groups and
no tasks. Frequent fails of rmdir() is not useful to users.
(And the reason for -EBUSY is unknown to users.....in most cases)

This patch tries to modify above behavior, by
	- retries if css_refcnt is got by someone.
	- add "return value" to pre_destroy() and allows subsystem to
	  say "we're really busy!"

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:54 -07:00
Li Xiaodong 45dad7bd9d documentation: fix unix_dgram_qlen description
Previous description about system parameter in /proc/sys/net/unix/ is
wrong (or missed).  Simply add a new description about unix_dgram_qlen
according to latest kernel.

Signed-off-by: Li Xiaodong <lixd@cn.fujitsu.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:53 -07:00
Shen Feng 760df93ecd documentation: update Documentation/filesystem/proc.txt and Documentation/sysctls
Now /proc/sys is described in many places and much information is
redundant.  This patch updates the proc.txt and move the /proc/sys
desciption out to the files in Documentation/sysctls.

Details are:

merge
-  2.1  /proc/sys/fs - File system data
-  2.11 /proc/sys/fs/mqueue - POSIX message queues filesystem
-  2.17 /proc/sys/fs/epoll - Configuration options for the epoll interface
with Documentation/sysctls/fs.txt.

remove
-  2.2  /proc/sys/fs/binfmt_misc - Miscellaneous binary formats
since it's not better then the Documentation/binfmt_misc.txt.

merge
-  2.3  /proc/sys/kernel - general kernel parameters
with Documentation/sysctls/kernel.txt

remove
-  2.5  /proc/sys/dev - Device specific parameters
since it's obsolete the sysfs is used now.

remove
-  2.6  /proc/sys/sunrpc - Remote procedure calls
since it's not better then the Documentation/sysctls/sunrpc.txt

move
-  2.7  /proc/sys/net - Networking stuff
-  2.9  Appletalk
-  2.10 IPX
to newly created Documentation/sysctls/net.txt.

remove
-  2.8  /proc/sys/net/ipv4 - IPV4 settings
since it's not better then the Documentation/networking/ip-sysctl.txt.

add
- Chapter 3 Per-Process Parameters
to descibe /proc/<pid>/xxx parameters.

Signed-off-by: Shen Feng <shen@cn.fujitsu.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:53 -07:00
Henrik Austad 70eed8d066 documentation: ignore byproducts from latex
When using 'make pdfdocs', auto-generated files should be ignored

Signed-off-by: Henrik Austad <henrik@austad.us>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:53 -07:00
David Brownell 8a0cecffeb gpio: gpio_{request,free}() now required (feature removal)
We want to phase out the GPIO "autorequest" mechanism in gpiolib and
require all callers to use gpio_request().

 - Update feature-removal-schedule
 - Update the documentation now
 - Convert the relevant pr_warning() in gpiolib to a WARN()
   so folk using this mechanism get a noisy stack dump

Some drivers and board init code will probably need to change.
Implementations not using gpiolib will still be fine; they are already
required to implement gpio_{request,free}() stubs.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:51 -07:00
Luca Tettamanti 7e90560c50 ACPI: acpi_enforce_resource=strict by default
Enforce strict resource checking - disallowing access by native
drivers to IO ports and memory regions claimed by ACPI firmware.

The patch is mainly aimed to block native hwmon drivers from touching
monitoring chips that ACPI thinks it own.

If this causes a regression, boot with "acpi_enforce_resources=lax"
which was the previous default.

http://bugzilla.kernel.org/show_bug.cgi?id=12376
http://bugzilla.kernel.org/show_bug.cgi?id=12541

Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
Acked-by: Pavel Machek <pavel@suse.cz>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-02 18:57:46 -04:00
Russell King cd02938a82 Merge branch 'smsc911x-armplatforms' of git://github.com/steveglen/linux-2.6 2009-04-02 23:22:11 +01:00
Mark Brown a7808331f1 ASoC: Add some documentation for the ASoC jack API
A brief overview of how the components of the API fit together.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-02 16:34:20 +01:00
Marcin Slusarz 7ac9bcd5da udf: implement mode and dmode mounting options
"dmode" allows overriding permissions of directories and
"mode" allows overriding permissions of files.

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jan Kara <jack@suse.cz>
2009-04-02 12:29:50 +02:00
Jesper Dangaard Brouer edd4070f5d Doc: Fix spelling in RCU/rculist_nulls.txt.
Doc: Fix spelling in RCU/rculist_nulls.txt.

Trival spelling fixes in RCU/rculist_nulls.txt.

Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk>
Tested-by: Jarek Poplawski <jarkao2@gmail.com;->
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-02 01:33:51 -07:00
Jesper Dangaard Brouer 3943ac5d99 Doc: Fix wrong API example usage of call_rcu().
At some point the API of call_rcu() changed from three parameters
to two parameters, correct the documentation.

One confusing thing in RCU/listRCU.txt, which is NOT fixed in this patch,
is that no reason or explaination is given for using call_rcu() instead of
the normal synchronize_rcu() call.

Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-02 01:33:50 -07:00
Jesper Dangaard Brouer 9ba30d7444 Doc: Fix missing whitespaces in RCU documentation.
Trivial fix while reading through the RCU docs.

Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-02 01:33:50 -07:00
Ramkrishna Vepa 5adfb64bdd Neterion: Driver help file
- vxge driver help text file.

- No change from previous submission.

- Changes in previous submissions -
  Removed the performance tuning section with instructions to disable
  time stamps and change sysctl settings - Reported by Dave Miller
  General clean up.
 - Removed tx/rx_pause, exec_mode, tx_steering_type, rx_steering_type, gro,
   intr_type, rx & tx max_indicate_pkts and exec_mode loadable parameters. The
   driver default settings work well in most if not all cases. Another patch
   to configure these parameters with ethtool will be released in the future -
   Reported by Stephen Hemminger.
- Incorporated following fixes based on comments from Ben Hutchings
        Removed references to earlier kernel versions.
        Removed sections that are similar for all drivers -
                Load/Unload
                Identifying the adapter/interface
                Boot time configuration
        Removed loadable parameter -
                NAPI - Napi is always enabled.
                rx_steering_type & ring_blocks - The driver default settings
                work well in most if not all cases. Another patch to configure
                these parameters with ethtool will be released in the future.
        Removed ethtool support section - No need to duplicate ethtool
                docs here.
        Removed Known Issue on SUSE 9 - Doesn't apply when using a
                current kernel.
        Removed Common Problems section - These don't apply to in-tree modules.
        Removed Available Downloads section - Not sure this belongs in-tree.
        Removed Copyright information - This notice doesn't belong in
                the kernel.

Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com>
Signed-off-by: Rastapur Santosh <santosh.rastapur@neterion.com>
Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-02 00:33:39 -07:00
Paul Mundt eeee7853c4 sh: Add a command line option for disabling I/O trapping.
This adds a 'noiotrap' kernel command line option to permit disabling of
I/O trapping. This is mostly useful for running on emulators where the
physical device limitations are not an issue.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-02 12:31:16 +09:00
Ingo Molnar 8302294f43 Merge branch 'tracing/core-v2' into tracing-for-linus
Conflicts:
	include/linux/slub_def.h
	lib/Kconfig.debug
	mm/slob.c
	mm/slub.c
2009-04-02 00:49:02 +02:00
Paulius Zaleckas 01a24d2b93 [ARM] 5437/1: Add documentation for "nohlt" kernel parameter
As per discussion in:
http://marc.info/?l=linux-arm-kernel&m=123633652517391&w=2

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-01 22:15:37 +01:00
Linus Torvalds 395d73413c Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (33 commits)
  ext4: Regularize mount options
  ext4: fix locking typo in mballoc which could cause soft lockup hangs
  ext4: fix typo which causes a memory leak on error path
  jbd2: Update locking coments
  ext4: Rename pa_linear to pa_type
  ext4: add checks of block references for non-extent inodes
  ext4: Check for an valid i_mode when reading the inode from disk
  ext4: Use WRITE_SYNC for commits which are caused by fsync()
  ext4: Add auto_da_alloc mount option
  ext4: Use struct flex_groups to calculate get_orlov_stats()
  ext4: Use atomic_t's in struct flex_groups
  ext4: remove /proc tuning knobs
  ext4: Add sysfs support
  ext4: Track lifetime disk writes
  ext4: Fix discard of inode prealloc space with delayed allocation.
  ext4: Automatically allocate delay allocated blocks on rename
  ext4: Automatically allocate delay allocated blocks on close
  ext4: add EXT4_IOC_ALLOC_DA_BLKS ioctl
  ext4: Simplify delalloc code by removing mpage_da_writepages()
  ext4: Save stack space by removing fake buffer heads
  ...
2009-04-01 10:57:49 -07:00
Linus Torvalds e76e5b2c66 Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (88 commits)
  PCI: fix HT MSI mapping fix
  PCI: don't enable too much HT MSI mapping
  x86/PCI: make pci=lastbus=255 work when acpi is on
  PCI: save and restore PCIe 2.0 registers
  PCI: update fakephp for bus_id removal
  PCI: fix kernel oops on bridge removal
  PCI: fix conflict between SR-IOV and config space sizing
  powerpc/PCI: include pci.h in powerpc MSI implementation
  PCI Hotplug: schedule fakephp for feature removal
  PCI Hotplug: rename legacy_fakephp to fakephp
  PCI Hotplug: restore fakephp interface with complete reimplementation
  PCI: Introduce /sys/bus/pci/devices/.../rescan
  PCI: Introduce /sys/bus/pci/devices/.../remove
  PCI: Introduce /sys/bus/pci/rescan
  PCI: Introduce pci_rescan_bus()
  PCI: do not enable bridges more than once
  PCI: do not initialize bridges more than once
  PCI: always scan child buses
  PCI: pci_scan_slot() returns newly found devices
  PCI: don't scan existing devices
  ...

Fix trivial append-only conflict in Documentation/feature-removal-schedule.txt
2009-04-01 09:47:12 -07:00
Krzysztof Helt ddb53d48da fbdev: remove cyblafb driver
A tridentfb driver has all the functionality of the cyblafb driver without
the bugs of the latter.

Changes to the tridentfb driver:

- FBINFO_READS_FAST added to the tridentfb.  The cyblafb used a blitter
  for scrolling which is faster than color expansion on Cyberblade
  chipsets.  The blitter is slower on a discrete Blade3D core.  Use the
  blitter for scrolling in the tridentfb only for integrated Blade3D
  cores.  Now, scrolling speed is about equal for the tridentfb and the
  cyblafb.

- a copyright notice addition is done on request of Jani Monoses (the
  first author of the tridentfb).

Tested on AGP Blade3D card and PCChips
M787CLR motherboard: VIA C3 cpu +
VT8601 north  bridge (aka Cyberblade/i1).

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Jani Monoses" <jani@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:33 -07:00
Anton Vorontsov 3f1c6ebf57 powerpc: add mmc-spi-slot bindings
The bindings describes a case where MMC/SD/SDIO slot directly connected to
a SPI bus.  Such setups are widely used on embedded PowerPC boards.

The patch also adds the mmc-spi-slot entry to the OpenFirmware modalias
table.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:23 -07:00
Ira Snyder 72f5de92e1 hwmon: Add LTC4215 driver
Add Linux support for the Linear Technology LTC4215 Hot Swap controller
I2C monitoring interface.

I have tested the driver with my board, and it appears to work fine.  With
the power supplies disabled, it reads 11.93V input, 1.93V output, no
current and no power.  With the supplies enabled, it reads 11.93V input,
11.98V output, no current, no power.  I'm not drawing any current at the
moment, so this is reasonable.  The value in the sense register never
reads anything except 0, so I expect to get zero from the current and
power calculations.

I didn't attempt to support changing any of the chip's settings or
enabling the FET.  I'm not sure even how to do that and still fit within
the hwmon framework.  :)

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:21 -07:00
Pavel Machek 2b872903c5 hp_accel: small documentation updates
Fix english in Documentation, add "how to test" description.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Cc: Vladimir Botka <vbotka@suse.cz>
Cc: <Quoc.Pham@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:21 -07:00
Daniel Mack 3cdbbeebb7 drivers/misc/isl29003.c: driver for the ISL29003 ambient light sensor
Add a driver for Intersil's ISL29003 ambient light sensor device plus some
documentation.  Inspired by tsl2550.c, a driver for a similar device.

It is put in drivers/misc for now until the industrial I/O framework gets
merged.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:18 -07:00
Eric Sandeen c2d7543851 filesystem freeze: allow SysRq emergency thaw to thaw frozen filesystems
Now that the filesystem freeze operation has been elevated to the VFS, and
is just an ioctl away, some sort of safety net for unintentionally frozen
root filesystems may be in order.

The timeout thaw originally proposed did not get merged, but perhaps
something like this would be useful in emergencies.

For example, freeze /path/to/mountpoint may freeze your root filesystem if
you forgot that you had that unmounted.

I chose 'j' as the last remaining character other than 'h' which is sort
of reserved for help (because help is generated on any unknown character).

I've tested this on a non-root fs with multiple (nested) freezers, as well
as on a system rendered unresponsive due to a frozen root fs.

[randy.dunlap@oracle.com: emergency thaw only if CONFIG_BLOCK enabled]
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Cc: Takashi Sato <t-sato@yk.jp.nec.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:17 -07:00
Nick Piggin c2ec175c39 mm: page_mkwrite change prototype to match fault
Change the page_mkwrite prototype to take a struct vm_fault, and return
VM_FAULT_xxx flags.  There should be no functional change.

This makes it possible to return much more detailed error information to
the VM (and also can provide more information eg.  virtual_address to the
driver, which might be important in some special cases).

This is required for a subsequent fix.  And will also make it easier to
merge page_mkwrite() with fault() in future.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Artem Bityutskiy <dedekind@infradead.org>
Cc: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:14 -07:00
Ravikiran G Thirumalai 2584e51732 mm: reintroduce and deprecate rlimit based access for SHM_HUGETLB
Allow non root users with sufficient mlock rlimits to be able to allocate
hugetlb backed shm for now.  Deprecate this though.  This is being
deprecated because the mlock based rlimit checks for SHM_HUGETLB is not
consistent with mmap based huge page allocations.

Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Reviewed-by: Mel Gorman <mel@csn.ul.ie>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Adam Litke <agl@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:12 -07:00
Bharata B Rao ef12fefabf cpuacct: add per-cgroup utime/stime statistics
Add per-cgroup cpuacct controller statistics like the system and user
time consumed by the group of tasks.

Changelog:

v7
- Changed the name of the statistic from utime to user and from stime to
  system so that in future we could easily add other statistics like irq,
  softirq, steal times etc easily.

v6
- Fixed a bug in the error path of cpuacct_create() (pointed by Li Zefan).

v5
- In cpuacct_stats_show(), use cputime64_to_clock_t() since we are
  operating on a 64bit variable here.

v4
- Remove comments in cpuacct_update_stats() which explained why rcu_read_lock()
  was needed (as per Peter Zijlstra's review comments).
- Don't say that percpu_counter_read() is broken in Documentation/cpuacct.txt
  as per KAMEZAWA Hiroyuki's review comments.

v3
- Fix a small race in the cpuacct hierarchy walk.

v2
- stime and utime now exported in clock_t units instead of msecs.
- Addressed the code review comments from Balbir and Li Zefan.
- Moved to -tip tree.

v1
- Moved the stime/utime accounting to cpuacct controller.

Earlier versions
- http://lkml.org/lkml/2009/2/25/129

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Balaji Rao <balajirrao@gmail.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Tested-by: Balbir Singh <balbir@linux.vnet.ibm.com>
LKML-Reference: <20090331043222.GA4093@in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-01 16:49:38 +02:00
Boaz Harrosh 214c8adb87 exofs: Documentation
Added some documentation in exofs.txt, as well as a BUGS file.

For further reading, operation instructions, example scripts
and up to date infomation and code please see:
http://open-osd.org

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-03-31 19:44:38 +03:00
David Brownell 853116a105 regulator: add get_status()
Based on previous LKML discussions:

 * Update docs for regulator sysfs class attributes to highlight
   the fact that all current attributes are intended to be control
   inputs, including notably "state" and "opmode" which previously
   implied otherwise.

 * Define a new regulator driver get_status() method, which is the
   first method reporting regulator outputs instead of inputs.
   It can report on/off and error status; or instead of simply
   "on", report the actual operating mode.

For the moment, this is a sysfs-only interface, not accessible to
regulator clients.  Such clients can use the current notification
interfaces to detect errors, if the regulator reports them.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31 09:56:20 +01:00
NeilBrown 1137354234 Documentation/md.txt update
Update md.txt to reflect recent changes in a number of sysfs
attributes.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31 15:18:37 +11:00
Linus Torvalds db6f204019 Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest-and-virtio
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest-and-virtio:
  lguest: barrier me harder
  lguest: use bool instead of int
  lguest: use KVM hypercalls
  lguest: wire up pte_update/pte_update_defer
  lguest: fix spurious BUG_ON() on invalid guest stack.
  virtio: more neatening of virtio_ring macros.
  virtio: fix BAD_RING, START_US and END_USE macros
2009-03-30 17:57:39 -07:00
Linus Torvalds 3c6fae67d0 Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  hwmon: (fschmd) Add support for the FSC Hades IC
  hwmon: (fschmd) Add support for the FSC Syleus IC
  i2c-i801: Instantiate FSC hardware montioring chips
  dmi: Let dmi_walk() users pass private data
  hwmon: Define a standard interface for chassis intrusion detection
  Move the pcf8591 driver to hwmon
  hwmon: (w83627ehf) Only expose in6 or temp3 on the W83667HG
  hwmon: (w83627ehf) Add support for W83667HG
  hwmon: (w83627ehf) Invert fan pin variables logic
  hwmon: (hdaps) Fix Thinkpad X41 axis inversion
  hwmon: (hdaps) Allow inversion of separate axis
  hwmon: (ds1621) Clean up documentation
  hwmon: (ds1621) Avoid unneeded register access
  hwmon: (ds1621) Clean up register access
  hwmon: (ds1621) Reorder code statements
2009-03-30 17:54:32 -07:00
Linus Torvalds c4e1aa67ed Merge branch 'locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (33 commits)
  lockdep: fix deadlock in lockdep_trace_alloc
  lockdep: annotate reclaim context (__GFP_NOFS), fix SLOB
  lockdep: annotate reclaim context (__GFP_NOFS), fix
  lockdep: build fix for !PROVE_LOCKING
  lockstat: warn about disabled lock debugging
  lockdep: use stringify.h
  lockdep: simplify check_prev_add_irq()
  lockdep: get_user_chars() redo
  lockdep: simplify get_user_chars()
  lockdep: add comments to mark_lock_irq()
  lockdep: remove macro usage from mark_held_locks()
  lockdep: fully reduce mark_lock_irq()
  lockdep: merge the !_READ mark_lock_irq() helpers
  lockdep: merge the _READ mark_lock_irq() helpers
  lockdep: simplify mark_lock_irq() helpers #3
  lockdep: further simplify mark_lock_irq() helpers
  lockdep: simplify the mark_lock_irq() helpers
  lockdep: split up mark_lock_irq()
  lockdep: generate usage strings
  lockdep: generate the state bit definitions
  ...
2009-03-30 17:17:35 -07:00
Linus Torvalds cf2f7d7c90 Merge branch 'proc-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc
* 'proc-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc:
  Revert "proc: revert /proc/uptime to ->read_proc hook"
  proc 2/2: remove struct proc_dir_entry::owner
  proc 1/2: do PDE usecounting even for ->read_proc, ->write_proc
  proc: fix sparse warnings in pagemap_read()
  proc: move fs/proc/inode-alloc.txt comment into a source file
2009-03-30 16:06:04 -07:00
Alexey Dobriyan 99b7623380 proc 2/2: remove struct proc_dir_entry::owner
Setting ->owner as done currently (pde->owner = THIS_MODULE) is racy
as correctly noted at bug #12454. Someone can lookup entry with NULL
->owner, thus not pinning enything, and release it later resulting
in module refcount underflow.

We can keep ->owner and supply it at registration time like ->proc_fops
and ->data.

But this leaves ->owner as easy-manipulative field (just one C assignment)
and somebody will forget to unpin previous/pin current module when
switching ->owner. ->proc_fops is declared as "const" which should give
some thoughts.

->read_proc/->write_proc were just fixed to not require ->owner for
protection.

rmmod'ed directories will be empty and return "." and ".." -- no harm.
And directories with tricky enough readdir and lookup shouldn't be modular.
We definitely don't want such modular code.

Removing ->owner will also make PDE smaller.

So, let's nuke it.

Kudos to Jeff Layton for reminding about this, let's say, oversight.

http://bugzilla.kernel.org/show_bug.cgi?id=12454

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-03-31 01:14:44 +04:00
Linus Torvalds 712b0006bf Merge branch 'iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (60 commits)
  dma-debug: make memory range checks more consistent
  dma-debug: warn of unmapping an invalid dma address
  dma-debug: fix dma_debug_add_bus() definition for !CONFIG_DMA_API_DEBUG
  dma-debug/x86: register pci bus for dma-debug leak detection
  dma-debug: add a check dma memory leaks
  dma-debug: add checks for kernel text and rodata
  dma-debug: print stacktrace of mapping path on unmap error
  dma-debug: Documentation update
  dma-debug: x86 architecture bindings
  dma-debug: add function to dump dma mappings
  dma-debug: add checks for sync_single_sg_*
  dma-debug: add checks for sync_single_range_*
  dma-debug: add checks for sync_single_*
  dma-debug: add checking for [alloc|free]_coherent
  dma-debug: add add checking for map/unmap_sg
  dma-debug: add checking for map/unmap_page/single
  dma-debug: add core checking functions
  dma-debug: add debugfs interface
  dma-debug: add kernel command line parameters
  dma-debug: add initialization code
  ...

Fix trivial conflicts due to whitespace changes in arch/x86/kernel/pci-nommu.c
2009-03-30 13:41:00 -07:00
Jean Delvare ec19920944 hwmon: Define a standard interface for chassis intrusion detection
Define a standard interface for the chassis intrusion detection feature
some hardware monitoring chips have. Some drivers have custom sysfs
entries for it, but a standard interface would allow integration with
user-space (namely libsensors.)

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Acked-by: Matt Roberds <mattroberds@cox.net>
2009-03-30 21:46:44 +02:00
Jean Delvare fb4504fe84 Move the pcf8591 driver to hwmon
Directory drivers/i2c/chips is going away, so drivers there must find
new homes. For the pcf8591 driver, the best choice seems to be the
hwmon subsystem. While the Philips PCF8591 device isn't a typical
hardware monitoring chip, its DAC interface is compatible with the
hwmon one, so it fits somewhat.

If a better subsystem is ever created for ADC/DAC chips, the driver
could be moved there.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
2009-03-30 21:46:43 +02:00
Gong Jun 237c8d2f54 hwmon: (w83627ehf) Add support for W83667HG
Add initial support for the Nuvoton W83667HG chip to the w83627ehf
driver. It has been tested on ASUS P5QL PRO by Gong Jun.

At the moment there is still a usability issue which is that only in6
or temp3 can be present on the W83667HG, so the driver shouldn't
expose both. This will be addressed later.

Signed-off-by: Gong Jun <JGong@nuvoton.com>
Acked-by: David Hubbard <david.c.hubbard@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-03-30 21:46:42 +02:00
Jean Delvare 25f3311acc hwmon: (ds1621) Clean up documentation
* The alarms sysfs file is deprecated, and individual alarm files are
  self-explanatory.
* The driver doesn't implement high-reslution temperature readings so
  don't document that.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
2009-03-30 21:46:41 +02:00
Linus Torvalds 019abbc870 Merge branch 'x86-stage-3-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-stage-3-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (190 commits)
  Revert "cpuacct: reduce one NULL check in fast-path"
  Revert "x86: don't compile vsmp_64 for 32bit"
  x86: Correct behaviour of irq affinity
  x86: early_ioremap_init(), use __fix_to_virt(), because we are sure it's safe
  x86: use default_cpu_mask_to_apicid for 64bit
  x86: fix set_extra_move_desc calling
  x86, PAT, PCI: Change vma prot in pci_mmap to reflect inherited prot
  x86/dmi: fix dmi_alloc() section mismatches
  x86: e820 fix various signedness issues in setup.c and e820.c
  x86: apic/io_apic.c define msi_ir_chip and ir_ioapic_chip all the time
  x86: irq.c keep CONFIG_X86_LOCAL_APIC interrupts together
  x86: irq.c use same path for show_interrupts
  x86: cpu/cpu.h cleanup
  x86: Fix a couple of sparse warnings in arch/x86/kernel/apic/io_apic.c
  Revert "x86: create a non-zero sized bm_pte only when needed"
  x86: pci-nommu.c cleanup
  x86: io_delay.c cleanup
  x86: rtc.c cleanup
  x86: i8253 cleanup
  x86: kdebugfs.c cleanup
  ...
2009-03-30 11:38:31 -07:00
Linus Torvalds ebc8eca169 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (180 commits)
  powerpc: clean up ssi.txt, add definition for fsl,ssi-asynchronous
  powerpc/85xx: Add support for the "socrates" board (MPC8544).
  powerpc: Fix bugs introduced by sysfs changes
  powerpc: Sanitize stack pointer in signal handling code
  powerpc: Add write barrier before enabling DTL flags
  powerpc/83xx: Update ranges in gianfar node to match other dts
  powerpc/86xx: Move gianfar mdio nodes under the ethernet nodes
  powerpc/85xx: Move gianfar mdio nodes under the ethernet nodes
  powerpc/83xx: Move gianfar mdio nodes under the ethernet nodes
  powerpc/83xx: Add power management support for MPC837x boards
  powerpc/mm: Introduce early_init_mmu() on 64-bit
  powerpc/mm: Add option for non-atomic PTE updates to ppc64
  powerpc/mm: Fix printk type warning in mmu_context_nohash
  powerpc/mm: Rename arch/powerpc/kernel/mmap.c to mmap_64.c
  powerpc/mm: Merge various PTE bits and accessors definitions
  powerpc/mm: Tweak PTE bit combination definitions
  powerpc/cell: Fix iommu exception reporting
  powerpc/mm: e300c2/c3/c4 TLB errata workaround
  powerpc/mm: Used free register to save a few cycles in SW TLB miss handling
  powerpc/mm: Remove unused register usage in SW TLB miss handling
  ...
2009-03-30 10:23:53 -07:00
Mauro Carvalho Chehab aeecea2623 V4L/DVB (11225): v4lgrab: fix compilation warnings
Documentation/video4linux/v4lgrab.c: In function ‘main’:
Documentation/video4linux/v4lgrab.c:193: warning: ‘src_depth’ is used uninitialized in this function
Documentation/video4linux/v4lgrab.c:108: warning: ‘b’ may be used uninitialized in this function
Documentation/video4linux/v4lgrab.c:108: warning: ‘g’ may be used uninitialized in this function
Documentation/video4linux/v4lgrab.c:108: warning: ‘r’ may be used uninitialized in this function

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:41 -03:00
Jean-Francois Moine 7ddfda9aa6 V4L/DVB (11223): gspca - doc: Add the 15b8:6001 webcam to the Documentation.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:41 -03:00
Mauro Carvalho Chehab f65a95bbf4 V4L/DVB (11138): get_dvb_firmware: add support for downloading the cx2584x firmware for pvrusb2
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:31 -03:00
Mauro Carvalho Chehab 5297e6f7e9 V4L/DVB (11137): get_dvb_firmware: add cx23885 firmwares
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:31 -03:00
Mauro Carvalho Chehab b888c5dadb V4L/DVB (11136): get_dvb_firmware: Add download code for cx18 firmwares
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:31 -03:00
Alan McIvor dceaddb978 V4L/DVB (11124): Add support for ProVideo PV-183 to bttv
Add support for ProVideo PV-183 to bttv

This patch adds support for the ProVideo PV-183 card to the bttv
device driver. The PV-183 is a PCI card with 8 BT878 devices plus a Hint
Corp HiNT HB4 PCI-PCI Bridge. Each BT878 has two composite input channels
available. There are no tuners on this card.

Signed-off-by: Alan McIvor <alan.mcivor@reveal.co.nz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:31 -03:00
Mauro Carvalho Chehab 06e9509ff3 V4L/DVB (11108): get_dvb_firmware: Add option to download firmware for cx231xx
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:29 -03:00
Hans Verkuil 15965f063d V4L/DVB (11051): v4l-dvb: replace remaining references to the old mailinglist.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:23 -03:00
Hans Verkuil ae6cfaace1 V4L/DVB (11044): v4l2-device: add v4l2_device_disconnect
Call v4l2_device_disconnect when the parent of a hotpluggable device
disconnects. This ensures that you do not have a pointer to a device that
is no longer present.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:22 -03:00
Jean-Francois Moine 71cb2764fc V4L/DVB (11039): gspca - most jpeg subdrivers: Change the JPEG header creation.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:22 -03:00
Hans Verkuil 98ec633972 V4L/DVB (11021): v4l2-device: add a notify callback.
Add a notify callback to v4l2_device to let sub-devices notify their
parent of special events.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:20 -03:00
Hans Verkuil 005759613b V4L/DVB (10988): v4l2-dev: use parent field if the v4l2_device has no parent set.
Normally the parent device of v4l2_device is used as the video device
node's parent. But if it was not set, then use the parent field in the
video_device struct.

This is needed in the cx88 driver, which has one core v4l2_device but
creates multiple pci devices (one each for raw and mpeg video).

So you cannot associate the core v4l2_device with a particular PCI device,
but you can do that for each video_device.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:20 -03:00
Hans Verkuil 2c79252326 V4L/DVB (10980): doc: improve the v4l2-framework documentation.
Emphasize the need to call i2c_set_adapdata and clarify the use of the
chipid in v4l2_i2c_new_(probed_)device().

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:19 -03:00
Stephan Wienczny 70101a2785 V4L/DVB (10949): Add support for Terratec Cinergy HT PCI MKII
This patch adds support for Terratec Cinergy HT PCI MKII with card id 79.
Its more or less a copy of Pinnacle Hybrid PCTV.
Thanks to k1ngf1sher on forum.ubuntuusers.de for the idea to copy that card.

Signed-off-by: Stephan Wienczny <stephan@wienczny.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:18 -03:00
Robert Millan 76ecf4599e V4L/DVB (10944): Conceptronic CTVFMI2 PCI Id
My BTTV_BOARD_CONCEPTRONIC_CTVFMI2 card wasn't auto-detected, here's a patch
that adds its PCI id.

lspci -nnv output:

05:06.0 Multimedia video controller [0400]: Brooktree Corporation Bt878 Video Capture [109e:036e] (rev 11)
05:06.1 Multimedia controller [0480]: Brooktree Corporation Bt878 Audio Capture [109e:0878] (rev 11)

Press <break> within 3 seconds if this is wrong.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:17 -03:00
Jean Delvare 4dbf46a048 V4L/DVB (10931): zoran: Drop the lock_norm module parameter
The lock_norm module parameter doesn't look terribly useful. If you
don't want to change the norm, just don't change it. As a matter of
fact, no other v4l driver has such a parameter.

Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:16 -03:00
Michael Krufky 3abdedd8a4 V4L/DVB (10926): saa7134: enable digital tv support for Hauppauge WinTV-HVR1120
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:16 -03:00
Michael Krufky e8944282a7 V4L/DVB (10923): saa7134: fix typo in product name
replace occurances of "HVR1150" with "HVR1120" - this was a typo.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:16 -03:00
Hans Verkuil cf5193c740 V4L/DVB (10909): tvmixer: remove last remaining references to this deleted module.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:15 -03:00
Mauro Carvalho Chehab 42d12f5aa1 V4L/DVB (10870a): remove all references for video_decoder.h
changeset 04934e44e3784a1b969582e2d59afcec278470c6 removed the last implementation
that were still using the V4L1 obsoleted header.
Now, video_decoder.h is not used anymore by any driver.

Let's remove it and all references for it in Kernel.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:15 -03:00
Michael Krufky f9996c9562 V4L/DVB (10877): saa7134: add analog support for Hauppauge HVR1110r3 boards
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:12 -03:00
Bruno Christo 0c5db42551 V4L/DVB (10827): Add support for GeoVision GV-800(S)
I have a GeoVision GV-800(S) card, it has 4 CONEXANT BT878A chips.
It has 16 video inputs and 4 audio inputs, and it is almost identical
to the GV-800, as seen on http://bttv-gallery.de .
The only difference appears to be the analog mux, it has a CD22M3494
in place of the MT8816AP. The card has a blue PCB, as seen in this
picture: http://www.gsbr.com.br/imagem/kits/GeoVision%20GV%20800.jpg .

This card wasn't originally supported, and it was detected as
UNKNOWN/GENERIC. The video inputs weren't working, so I tried
"forcing" a few cards like the GeoVision GV-600, but there was still
no video. So I made a patch to support this card, based on the Kodicom
4400r.

The GV-800(S) is identified as follows:

...
02:00.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
02:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)
02:04.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
02:04.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)
02:08.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
02:08.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)
02:0c.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
02:0c.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)

...
02:00.0 0400: 109e:036e (rev 11)
       Subsystem: 800a:763d
       Flags: bus master, medium devsel, latency 32, IRQ 10
       Memory at cdfff000 (32-bit, prefetchable) [size=4K]
       Capabilities: [44] Vital Product Data <?>
       Capabilities: [4c] Power Management version 2
       Kernel modules: bttv

02:00.1 0480: 109e:0878 (rev 11)
       Subsystem: 800a:763d
       Flags: bus master, medium devsel, latency 32, IRQ 10
       Memory at cdffe000 (32-bit, prefetchable) [size=4K]
       Capabilities: [44] Vital Product Data <?>
       Capabilities: [4c] Power Management version 2

02:04.0 0400: 109e:036e (rev 11)
       Subsystem: 800b:763d
       Flags: bus master, medium devsel, latency 32, IRQ 10
       Memory at cdffd000 (32-bit, prefetchable) [size=4K]
       Capabilities: [44] Vital Product Data <?>
       Capabilities: [4c] Power Management version 2
       Kernel modules: bttv

02:04.1 0480: 109e:0878 (rev 11)
       Subsystem: 800b:763d
       Flags: bus master, medium devsel, latency 32, IRQ 10
       Memory at cdffc000 (32-bit, prefetchable) [size=4K]
       Capabilities: [44] Vital Product Data <?>
       Capabilities: [4c] Power Management version 2

02:08.0 0400: 109e:036e (rev 11)
       Subsystem: 800c:763d
       Flags: bus master, medium devsel, latency 32, IRQ 10
       Memory at cdffb000 (32-bit, prefetchable) [size=4K]
       Capabilities: [44] Vital Product Data <?>
       Capabilities: [4c] Power Management version 2
       Kernel modules: bttv

02:08.1 0480: 109e:0878 (rev 11)
       Subsystem: 800c:763d
       Flags: bus master, medium devsel, latency 32, IRQ 10
       Memory at cdffa000 (32-bit, prefetchable) [size=4K]
       Capabilities: [44] Vital Product Data <?>
       Capabilities: [4c] Power Management version 2

02:0c.0 0400: 109e:036e (rev 11)
       Subsystem: 800d:763d
       Flags: bus master, medium devsel, latency 32, IRQ 10
       Memory at cdff9000 (32-bit, prefetchable) [size=4K]
       Capabilities: [44] Vital Product Data <?>
       Capabilities: [4c] Power Management version 2
       Kernel modules: bttv

02:0c.1 0480: 109e:0878 (rev 11)
       Subsystem: 800d:763d
       Flags: bus master, medium devsel, latency 32, IRQ 10
       Memory at cdff8000 (32-bit, prefetchable) [size=4K]
       Capabilities: [44] Vital Product Data <?>
       Capabilities: [4c] Power Management version 2

As you can see, the GV-800(S) card is almost identical to the GV-800
on bttv-gallery, so this patch might also work for that card. If not,
only a few changes should be required on the gv800s_write() function.

After this patch, the video inputs work correctly on linux 2.6.24 and
2.6.27 using the software 'motion'. The input order may seem a little
odd, but it's the order the original software/driver uses, and I decided
to keep that order to get the most out of the card.

I tried to get the audio working with the snd-bt87x module, but I only
get noise from every audio input, even after selecting a different mux
with alsamixer. Also, after trying to play sound from those sources, I
randomly get a RISC error about an invalid RISC opcode, and then that
output stops working. I also can't change the sampling rate when
recording. Any pointers to adding audio support are welcome.

Signed-off-by: Bruno Christo <bchristo@inf.ufsm.br>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:07 -03:00
Igor M. Liplianin 5a23b0762c V4L/DVB (10805): Add support for NetUP Dual DVB-S2 CI card
Add support for NetUP Dual DVB-S2 CI card
The card based on cx23885 PCI-e bridge, CiMax SP2 Common Interface chips,
STM lnbh24 LNB power chip, stv6110 tuners and stv0900 demodulator.
http://www.linuxtv.org/wiki/index.php/NetUP_Dual_DVB_S2_CI

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:05 -03:00
Douglas Schilling Landgraf ac40d9e098 V4L/DVB (10741): em28xx: Add Kaiser Baas Video to DVD maker support
Added usb vendor/product id for Kaiser Baas Video to DVD maker.
Thanks to Trevor Campbell <tca42186@bigpond.net.au> for providing all data and tests needed to add this card to em28xx driver.

Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:00 -03:00
Douglas Schilling Landgraf 1f372a930c V4L/DVB (10740): em28xx-cards: Add SIIG AVTuner-PVR board
Added SIIG AVTuner-PVR to the right entry.

Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:59 -03:00
Douglas Schilling Landgraf 812c582390 V4L/DVB (10739): em28xx-cards: remove incorrect entry
Removed EM2821_BOARD_PROLINK_PLAYTV_USB2 entry.
This entry has a incorrect tuner set.

Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:59 -03:00
Mauro Carvalho Chehab cc1139c7cd V4L/DVB(10738a): remove include/linux/video_encoder.h
include/linux/video_encoder.h is not used anymore by a v4l driver.
Let's remove it and its occurences.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:59 -03:00
Hans Verkuil b016760054 V4L/DVB (10644): v4l2-subdev: rename dev field to v4l2_dev
Remain consistent in the naming: fields pointing to v4l2_device should
be called v4l2_dev. There are too many device-like entities without
adding to the confusion by mixing naming conventions.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:50 -03:00
Hans Verkuil 3a63e4492f V4L/DVB (10643): v4l2-device: allow a NULL parent device when registering.
Some drivers (e.g. for ISA devices) have no parent device because there
is no associated bus driver. Allow the parent device to be NULL in
those cases when registering v4l2_device.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:50 -03:00
Mauro Carvalho Chehab a7a1c0e60c V4L/DVB (10571): v4l2-framework.txt: Fixes the videobuf init functions
Documents the driver usage functions, instead of the generic one used
by the videobuf specific handlers.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:48 -03:00
Mauro Carvalho Chehab 44061c05ac V4L/DVB (10570): v4l2-framework: documments videobuf usage on drivers
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:48 -03:00
Douglas Schilling Landgraf 1d6af821a9 V4L/DVB (10556): em28xx-cards: Add Pinnacle Dazzle Video Creator Plus DVC107 description
Added board Pinnacle Dazzle Video Creator Plus DVC107 to name description field.

Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:46 -03:00
Tobias Lorenz 00ec8d0799 V4L/DVB (10530): Documentation and code cleanups
- "DealExtreme" sells the "PCear" radio and that comes from "Sanei Electric".
- MPlayer is also usable as radio application.
- Consistent usage of tabulators and blanks in the code.

Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:45 -03:00
Indika Katugampala f74a61e3c6 V4L/DVB (10528): em28xx: support added for IO-DATA GV/MVP SZ - EMPIA-2820 chipset
[dougsland@redhat.com: Fixed CodingStyle]
Signed-off-by: Indika Katugampala <indika_20012001@yahoo.co.jp>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:45 -03:00
Douglas Schilling Landgraf 7aa0eabde0 V4L/DVB (10524): em28xx: Add DVC 101 model to Pinnacle Dazzle description
Added DVC 101 model to Pinnacle Dazzle description

Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:44 -03:00
Mauro Carvalho Chehab 56ee38071f V4L/DVB (10516): em28xx: Add support for Easy Cap Capture DC-60
Thanks to Peter Senna Tschudin <peter.senna@gmail.com> for borrow me one
of those devices.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:43 -03:00
Mauro Carvalho Chehab 0bf4f6ce6d V4L/DVB (10514): em28xx: Add support for Kaiomy TVnPC U2 stick
Thanks to Peter Senna Tschudin <peter.senna@gmail.com> for borrow me one
of those devices.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:43 -03:00
Hans Verkuil 89aec3e1ba V4L/DVB (10489): doc: use consistent naming conventions for vdev and v4l2_dev.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:41 -03:00
Hans Verkuil d7493e518f V4L/DVB (10487): doc: update hm12 documentation.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:41 -03:00
Jean-Francois Moine de43cd37b8 V4L/DVB (10421): gspca - documentation: Add the webcam 041e:405b.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:36 -03:00
Lierdakil db91235ee8 V4L/DVB (10388): gspca - pac207: Webcam 093a:2474 added.
Signed-off-by: Lierdakil <root@livid.pp.ru>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:34 -03:00
Kyle Guinn d661e62205 V4L/DVB (10366): gspca - mr97310a: New subdriver.
This patch adds support for USB webcams based on the MR97310A chip. It was
tested with an Aiptek PenCam VGA+ webcam.

Signed-off-by: Kyle Guinn <elyk03@gmail.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:32 -03:00
Douglas Schilling Landgraf f7fe3e6f3c V4L/DVB (10323): em28xx: Add entry for GADMEI TVR200
Added entry for GADMEI TVR200.
Thanks to Yohanes Nugroho <yohanes@gmail.com> for testing and data collection.

Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:28 -03:00
Douglas Kosovic ade0815c16 V4L/DVB (10299): bttv: Add support for IVCE-8784 support for V4L2 bttv driver
It's a quad Bt878 PCI-e x1 capture board that's basically the same as the
IVC-200 (quad Bt878 PCI) capture board that's currently supported in
the V4L2 bttv driver.

Manufacturer's web page for IVCE-8784 with photo and info:
  http://www.iei.com.tw/en/product_IPC.asp?model=IVCE-8784

Signed-off-by: Douglas Kosovic <douglask@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:26 -03:00
Igor M. Liplianin c9b8b04b26 V4L/DVB (10269): Add support for DVBWorld DVBS2 PCI-e 2005.
DVBWorld DVBS2 PCI-e 2005 card contains cx23885 PCI-e bridge
and cx24116 demodulator.
http://www.linuxtv.org/wiki/index.php/DVBWorld_DVB-S2_2005_PCI-Express_Card
The card tested by me (Igor).

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:24 -03:00
Igor M. Liplianin 579943f548 V4L/DVB (10267): Add support for TeVii S470 DVB-S2 PCI-e card.
TeVii S470 DVB-S2 PCI-e card contains cx23885 PCI-e bridge
and cx24116 demodulator.
http://www.linuxtv.org/wiki/index.php/TeVii_S470
The card tested by me (Igor).

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:23 -03:00
Igor M. Liplianin 96318d0cca V4L/DVB (10266): Add support for TurboSight TBS6920 DVB-S2 PCI-e card.
TurboSight TBS6920 DVB-S2 PCI-e card contains cx23885 PCI-e bridge
and cx24116 demodulator.
http://www.linuxtv.org/wiki/index.php/TBS_6920
The card tested by me (Igor).

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:23 -03:00
Antoine Jacquet c76b638ca2 V4L/DVB (10263): zr364xx: add support for Aiptek DV T300
Tested-by: Hámorszky Balázs <balihb@freepop.hu>
Signed-off-by: Antoine Jacquet <royale@zerezo.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:23 -03:00
Hans Verkuil f5360bdc55 V4L/DVB (10252): v4l2 doc: explain why v4l2_device_unregister_subdev() has to be called.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:23 -03:00
Thadeu Lima de Souza Cascardo 21acb9caa2 trivial: fix where cgroup documentation is not correctly referred to
cgroup documentation was moved to Documentation/cgroups/. There are some
places that still refer to Documentation/controllers/,
Documentation/cgroups.txt and Documentation/cpusets.txt. Fix those.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-30 15:22:02 +02:00
Thadeu Lima de Souza Cascardo 6d5e147dd0 trivial: Give the right path in Documentation example
While the Documentation example creates /cgroup/test, it removes
/test/cgroup, which is clearly not the intended path. Change that to
/cgroup/test.

Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-30 15:22:02 +02:00
Nick Andrew 877d03105d trivial: Fix misspelling of firmware
Fix misspelling of firmware.

Signed-off-by: Nick Andrew <nick@nick-andrew.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-30 15:21:59 +02:00
Chris Samuel caa790ba6c trivial: cgroups: documentation typo and spelling corrections
Minor typo and spelling corrections fixed whilst reading
to learn about cgroups capabilities.

Signed-off-by: Chris Samuel <chris@csamuel.org>
Acked-by: Paul Menage <menage@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-30 15:21:58 +02:00
Pavel Machek e3375ac767 trivial: document ext3 semantics of 'ro' option a bit better
ext3 has quite unexpected semantics or "ro" and defaults are
not what they are documented to be, due to mkfs override.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-30 15:21:56 +02:00
Jiri Slaby afa5eb7c68 HID: remove compat stuff
This removal was scheduled and there is no problem with later
distros to adapt for the new bus, thanks to aliases.

module-init-tools map files are deprecated nowadays, so that
the patch which introduced hid ones into the m-i-t won't be
accepted and hence there is no reason for leaving compat stuff in.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-30 15:12:54 +02:00
Rusty Russell d1881d3192 lguest: barrier me harder
Impact: barrier correctness in example launcher

I doubt either lguest user will complain about performance.

Reported-by: Christoph Hellwig <hch@infradead.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-30 21:55:26 +10:30
Benjamin Herrenschmidt 9ff9a26b78 Merge commit 'origin/master' into next
Manual merge of:
	arch/powerpc/include/asm/elf.h
	drivers/i2c/busses/i2c-mpc.c
2009-03-30 14:04:53 +11:00
Linus Torvalds 7541bba880 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  smack: Add a new '-CIPSO' option to the network address label configuration
  netlabel: Cleanup the Smack/NetLabel code to fix incoming TCP connections
  lsm: Remove the socket_post_accept() hook
  selinux: Remove the "compat_net" compatibility code
  netlabel: Label incoming TCP connections correctly in SELinux
  lsm: Relocate the IPv4 security_inet_conn_request() hooks
  TOMOYO: Fix a typo.
  smack: convert smack to standard linux lists
2009-03-28 17:30:42 -07:00
Ingo Molnar b0d44c0dbb Merge branch 'linus' into core/iommu
Conflicts:
	arch/x86/Kconfig
2009-03-28 23:05:50 +01:00
Ingo Molnar 3fab191002 Merge branch 'linus' into x86/core 2009-03-28 22:27:45 +01:00
Linus Torvalds 07d43ba986 Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c-core: Some style cleanups
  i2c-piix4: Add support for the Broadcom HT1100 chipset
  i2c-piix4: Add support to SB800 SMBus changes
  i2c-pca-platform: Use defaults if no platform_data given
  i2c-algo-pca: Use timeout for checking the state machine
  i2c-algo-pca: Rework waiting for a free bus
  i2c-algo-pca: Add PCA9665 support
  i2c: Adapt debug macros for KERN_* constants
  i2c-davinci: Fix timeout handling
  i2c: Adapter timeout is in jiffies
  i2c: Set a default timeout value for all adapters
  i2c: Add missing KERN_* constants to printks
  i2c-algo-pcf: Handle timeout correctly
  i2c-algo-pcf: Style cleanups
  eeprom/at24: Remove EXPERIMENTAL
  i2c-nforce2: Add support for MCP67, MCP73, MCP78S and MCP79
  i2c: Clarify which clients are auto-removed
  i2c: Let checkpatch shout on users of the legacy model
  i2c: Document the different ways to instantiate i2c devices
2009-03-28 14:04:53 -07:00
Linus Torvalds 0fe41b8982 Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (422 commits)
  [ARM] 5435/1: fix compile warning in sanity_check_meminfo()
  [ARM] 5434/1: ARM: OMAP: Fix mailbox compile for 24xx
  [ARM] pxa: fix the bad assumption that PCMCIA sockets always start with 0
  [ARM] pxa: fix Colibri PXA300 and PXA320 LCD backlight pins
  imxfb: Fix TFT mode
  i.MX21/27: remove ifdef CONFIG_FB_IMX
  imxfb: add clock support
  mxc: add arch_reset() function
  clkdev: add possibility to get a clock based on the device name
  i.MX1: remove fb support from mach-imx
  [ARM] pxa: build arch/arm/plat-pxa/mfp.c only when PXA3xx or ARCH_MMP defined
  Gemini: Add support for Teltonika RUT100
  Gemini: gpiolib based GPIO support v2
  MAINTAINERS: add myself as Gemini architecture maintainer
  ARM: Add Gemini architecture v3
  [ARM] OMAP: Fix compile for omap2_init_common_hw()
  MAINTAINERS: Add myself as Faraday ARM core variant maintainer
  ARM: Add support for FA526 v2
  [ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to linux/io.h
  [ARM] collie: fix two minor formatting nits
  ...
2009-03-28 14:03:14 -07:00
Linus Torvalds 7c730ccdc1 Merge branch 'percpu-cpumask-x86-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'percpu-cpumask-x86-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (682 commits)
  percpu: fix spurious alignment WARN in legacy SMP percpu allocator
  percpu: generalize embedding first chunk setup helper
  percpu: more flexibility for @dyn_size of pcpu_setup_first_chunk()
  percpu: make x86 addr <-> pcpu ptr conversion macros generic
  linker script: define __per_cpu_load on all SMP capable archs
  x86: UV: remove uv_flush_tlb_others() WARN_ON
  percpu: finer grained locking to break deadlock and allow atomic free
  percpu: move fully free chunk reclamation into a work
  percpu: move chunk area map extension out of area allocation
  percpu: replace pcpu_realloc() with pcpu_mem_alloc() and pcpu_mem_free()
  x86, percpu: setup reserved percpu area for x86_64
  percpu, module: implement reserved allocation and use it for module percpu variables
  percpu: add an indirection ptr for chunk page map access
  x86: make embedding percpu allocator return excessive free space
  percpu: use negative for auto for pcpu_setup_first_chunk() arguments
  percpu: improve first chunk initial area map handling
  percpu: cosmetic renames in pcpu_setup_first_chunk()
  percpu: clean up percpu constants
  x86: un-__init fill_pud/pmd/pte
  x86: remove vestigial fix_ioremap prototypes
  ...

Manually merge conflicts in arch/ia64/kernel/irq_ia64.c
2009-03-28 13:48:38 -07:00
Flavio Leitner 506a8b6c27 i2c-piix4: Add support for the Broadcom HT1100 chipset
Add support for the Broadcom HT1100 LD chipset (SMBus function.)

Signed-off-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-03-28 21:34:46 +01:00
Jean Delvare d2dd14ac18 i2c-nforce2: Add support for MCP67, MCP73, MCP78S and MCP79
The MCP78S and MCP79 appear to be compatible with the previous nForce
chips as far as the SMBus controller is concerned. The MCP67 and MCP73
were not tested yet but I'd be very surprised if they weren't
compatible too.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Oleg Ryjkov <olegr@olegr.ca>
Cc: Malcolm Lalkaka <mlalkaka@gmail.com>
Cc: Zbigniew Luszpinski <zbiggy@o2.pl>
2009-03-28 21:34:41 +01:00
Jean Delvare f02e3d74e9 i2c: Let checkpatch shout on users of the legacy model
As suggested by Mauro Carvalho Chehab.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
2009-03-28 21:34:40 +01:00
Jean Delvare 764c16918f i2c: Document the different ways to instantiate i2c devices
On popular demand, here comes some documentation about how to
instantiate i2c devices in the new (standard) i2c device driver
binding model.

I have also clarified how the class bitfield lets driver authors
control which buses are probed in the auto-detect case, and warned
more loudly against the abuse of this method.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Michael Lawnick <nospam_lawnick@gmx.de>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-28 21:34:40 +01:00
Linus Torvalds d54b3538b0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (119 commits)
  [SCSI] scsi_dh_rdac: Retry for NOT_READY check condition
  [SCSI] mpt2sas: make global symbols unique
  [SCSI] sd: Make revalidate less chatty
  [SCSI] sd: Try READ CAPACITY 16 first for SBC-2 devices
  [SCSI] sd: Refactor sd_read_capacity()
  [SCSI] mpt2sas v00.100.11.15
  [SCSI] mpt2sas: add MPT2SAS_MINOR(221) to miscdevice.h
  [SCSI] ch: Add scsi type modalias
  [SCSI] 3w-9xxx: add power management support
  [SCSI] bsg: add linux/types.h include to bsg.h
  [SCSI] cxgb3i: fix function descriptions
  [SCSI] libiscsi: fix possbile null ptr session command cleanup
  [SCSI] iscsi class: remove host no argument from session creation callout
  [SCSI] libiscsi: pass session failure a session struct
  [SCSI] iscsi lib: remove qdepth param from iscsi host allocation
  [SCSI] iscsi lib: have lib create work queue for transmitting IO
  [SCSI] iscsi class: fix lock dep warning on logout
  [SCSI] libiscsi: don't cap queue depth in iscsi modules
  [SCSI] iscsi_tcp: replace scsi_debug/tcp_debug logging with iscsi conn logging
  [SCSI] libiscsi_tcp: replace tcp_debug/scsi_debug logging with session/conn logging
  ...
2009-03-28 13:30:43 -07:00
Russell King ed40d0c472 Merge branch 'origin' into devel
Conflicts:
	sound/soc/pxa/pxa2xx-i2s.c
2009-03-28 20:29:51 +00:00
Theodore Ts'o 06705bff91 ext4: Regularize mount options
Add support for using the mount options "barrier" and "nobarrier", and
"auto_da_alloc" and "noauto_da_alloc", which is more consistent than
"barrier=<0|1>" or "auto_da_alloc=<0|1>".  Most other ext3/ext4 mount
options use the foo/nofoo naming convention.  We allow the old forms
of these mount options for backwards compatibility.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-03-28 10:59:57 -04:00
Etienne Basset 4303154e86 smack: Add a new '-CIPSO' option to the network address label configuration
This patch adds a new special option '-CIPSO' to the Smack subsystem. When used
in the netlabel list, it means "use CIPSO networking". A use case is when your
local network speaks CIPSO and you want also to connect to the unlabeled
Internet. This patch also add some documentation describing that. The patch
also corrects an oops when setting a '' SMACK64 xattr to a file.

Signed-off-by: Etienne Basset <etienne.basset@numericable.fr>
Signed-off-by: Paul Moore <paul.moore@hp.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-03-28 15:01:37 +11:00
Paul Moore 58bfbb51ff selinux: Remove the "compat_net" compatibility code
The SELinux "compat_net" is marked as deprecated, the time has come to
finally remove it from the kernel.  Further code simplifications are
likely in the future, but this patch was intended to be a simple,
straight-up removal of the compat_net code.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-03-28 15:01:37 +11:00
Ingo Molnar 82268da1b1 Merge branch 'linus' into percpu-cpumask-x86-for-linus-2
Conflicts:
	arch/sparc/kernel/time_64.c
	drivers/gpu/drm/drm_proc.c

Manual merge to resolve build warning due to phys_addr_t type change
on x86:

	drivers/gpu/drm/drm_info.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-28 04:26:01 +01:00
Luis R. Rodriguez 8a5117d80f cfg80211: default CONFIG_WIRELESS_OLD_REGULATORY to n
And update description and feature-removal schedule according
to the new plan.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:13:23 -04:00
Kalle Valo 04de838159 mac80211: add beacon filtering support
Add IEEE80211_HW_BEACON_FILTERING flag so that driver inform that it supports
beacon filtering. Drivers need to call the new function
ieee80211_beacon_loss() to notify about beacon loss.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:13:13 -04:00
Luis R. Rodriguez 6ee7d33056 cfg80211: make regdom module parameter available oustide of OLD_REG
It seems a few users are using this module parameter although its not
recommended. People are finding it useful despite there being utilities
for setting this in userspace. I'm not aware of any distribution using
this though.

Until userspace and distributions catch up with a default userspace
automatic replacement (GeoClue integration would be nirvana) we copy
the ieee80211_regdom module parameter from OLD_REG to the new reg
code to help these users migrate.

Users who are using the non-valid ISO / IEC 3166 alpha "EU" in their
ieee80211_regdom module parameter and migrate to non-OLD_REG enabled
system will world roam.

This also schedules removal of this same ieee80211_regdom module
parameter circa March 2010. Hope is by then nirvana is reached and
users will abandoned the module parameter completely.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:13:07 -04:00
Greg Banks b5cbc369db Document /proc/fs/nfsd/pool_stats
Document the format and semantics of the /proc/fs/nfsd/pool_stats file.

Signed-off-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-03-27 19:24:27 -04:00
Ingo Molnar 6e15cf0486 Merge branch 'core/percpu' into percpu-cpumask-x86-for-linus-2
Conflicts:
	arch/parisc/kernel/irq.c
	arch/x86/include/asm/fixmap_64.h
	arch/x86/include/asm/setup.h
	kernel/irq/handle.c

Semantic merge:
        arch/x86/include/asm/fixmap.h

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-27 17:28:43 +01:00
Timur Tabi df4b6806d3 powerpc: clean up ssi.txt, add definition for fsl,ssi-asynchronous
Add the definition of the fsl,ssi-asynchronous property to ssi.txt
(documentation of the device tree bindings for the Freescale SSI device).

Also tidy up the layout of ssi.txt.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-27 06:42:25 -05:00
Linus Torvalds 8e9d208972 Merge branch 'bkl-removal' of git://git.lwn.net/linux-2.6
* 'bkl-removal' of git://git.lwn.net/linux-2.6:
  Rationalize fasync return values
  Move FASYNC bit handling to f_op->fasync()
  Use f_lock to protect f_flags
  Rename struct file->f_ep_lock
2009-03-26 16:14:02 -07:00
Linus Torvalds a8416961d3 Merge branch 'irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (32 commits)
  x86: disable __do_IRQ support
  sparseirq, powerpc/cell: fix unused variable warning in interrupt.c
  genirq: deprecate obsolete typedefs and defines
  genirq: deprecate __do_IRQ
  genirq: add doc to struct irqaction
  genirq: use kzalloc instead of explicit zero initialization
  genirq: make irqreturn_t an enum
  genirq: remove redundant if condition
  genirq: remove unused hw_irq_controller typedef
  irq: export remove_irq() and setup_irq() symbols
  irq: match remove_irq() args with setup_irq()
  irq: add remove_irq() for freeing of setup_irq() irqs
  genirq: assert that irq handlers are indeed running in hardirq context
  irq: name 'p' variables a bit better
  irq: further clean up the free_irq() code flow
  irq: refactor and clean up the free_irq() code flow
  irq: clean up manage.c
  irq: use GFP_KERNEL for action allocation in request_irq()
  kernel/irq: fix sparse warning: make symbol static
  irq: optimize init_kstat_irqs/init_copy_kstat_irqs
  ...
2009-03-26 16:06:50 -07:00
Linus Torvalds 6671de344c Merge branch 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (26 commits)
  posix timers: fix RLIMIT_CPU && fork()
  time: ntp: fix bug in ntp_update_offset() & do_adjtimex(), fix
  time: ntp: clean up second_overflow()
  time: ntp: simplify ntp_tick_adj calculations
  time: ntp: make 64-bit constants more robust
  time: ntp: refactor do_adjtimex() some more
  time: ntp: refactor do_adjtimex()
  time: ntp: fix bug in ntp_update_offset() & do_adjtimex()
  time: ntp: micro-optimize ntp_update_offset()
  time: ntp: simplify ntp_update_offset_fll()
  time: ntp: refactor and clean up ntp_update_offset()
  time: ntp: refactor up ntp_update_frequency()
  time: ntp: clean up ntp_update_frequency()
  time: ntp: simplify the MAX_TICKADJ_SCALED definition
  time: ntp: simplify the second_overflow() code flow
  time: ntp: clean up kernel/time/ntp.c
  x86: hpet: stop HPET_COUNTER when programming periodic mode
  x86: hpet: provide separate functions to stop and start the counter
  x86: hpet: print HPET registers during setup (if hpet=verbose is used)
  time: apply NTP frequency/tick changes immediately
  ...
2009-03-26 16:05:42 -07:00
Linus Torvalds 831576fe40 Merge branch 'sched-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (46 commits)
  sched: Add comments to find_busiest_group() function
  sched: Refactor the power savings balance code
  sched: Optimize the !power_savings_balance during fbg()
  sched: Create a helper function to calculate imbalance
  sched: Create helper to calculate small_imbalance in fbg()
  sched: Create a helper function to calculate sched_domain stats for fbg()
  sched: Define structure to store the sched_domain statistics for fbg()
  sched: Create a helper function to calculate sched_group stats for fbg()
  sched: Define structure to store the sched_group statistics for fbg()
  sched: Fix indentations in find_busiest_group() using gotos
  sched: Simple helper functions for find_busiest_group()
  sched: remove unused fields from struct rq
  sched: jiffies not printed per CPU
  sched: small optimisation of can_migrate_task()
  sched: fix typos in documentation
  sched: add avg_overlap decay
  x86, sched_clock(): mark variables read-mostly
  sched: optimize ttwu vs group scheduling
  sched: TIF_NEED_RESCHED -> need_reshed() cleanup
  sched: don't rebalance if attached on NULL domain
  ...
2009-03-26 16:05:01 -07:00
Linus Torvalds 21cdbc1378 Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (81 commits)
  [S390] remove duplicated #includes
  [S390] cpumask: use mm_cpumask() wrapper
  [S390] cpumask: Use accessors code.
  [S390] cpumask: prepare for iterators to only go to nr_cpu_ids/nr_cpumask_bits.
  [S390] cpumask: remove cpu_coregroup_map
  [S390] fix clock comparator save area usage
  [S390] Add hwcap flag for the etf3 enhancement facility
  [S390] Ensure that ipl panic notifier is called late.
  [S390] fix dfp elf hwcap/facility bit detection
  [S390] smp: perform initial cpu reset before starting a cpu
  [S390] smp: fix memory leak on __cpu_up
  [S390] ipl: Improve checking logic and remove switch defaults.
  [S390] s390dbf: Remove needless check for NULL pointer.
  [S390] s390dbf: Remove redundant initilizations.
  [S390] use kzfree()
  [S390] BUG to BUG_ON changes
  [S390] zfcpdump: Prevent zcore from beeing built as a kernel module.
  [S390] Use csum_partial in checksum.h
  [S390] cleanup lowcore.h
  [S390] eliminate ipl_device from lowcore
  ...
2009-03-26 16:04:22 -07:00
Linus Torvalds 86d9c07017 Merge branch 'for-2.6.30' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.30' of git://git.kernel.dk/linux-2.6-block:
  Get rid of pdflush_operation() in emergency sync and remount
  btrfs: get rid of current_is_pdflush() in btrfs_btree_balance_dirty
  Move the default_backing_dev_info out of readahead.c and into backing-dev.c
  block: Repeated lines in switching-sched.txt
  bsg: Remove bogus check against request_queue->max_sectors
  block: WARN in __blk_put_request() for potential bio leak
  loop: fix circular locking in loop_clr_fd()
  loop: support barrier writes
  bsg: add support for tail queuing
  cpqarray: enable bus mastering
  block: genhd.h cleanup patch
  block: add private bio_set for bio integrity allocations
  block: genhd.h comment needs updating
  block: get rid of unused blkdev_free_rq() define
  block: remove various blk_queue_*() setting functions in blk_init_queue_node()
  cciss: add BUILD_BUG_ON() for catching bad CommandList_struct alignment
  block: don't create bio_vec slabs of less than the inline number
  block: cleanup bio_alloc_bioset()
2009-03-26 16:03:04 -07:00
Linus Torvalds 13220a94d3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1750 commits)
  ixgbe: Allow Priority Flow Control settings to survive a device reset
  net: core: remove unneeded include in net/core/utils.c.
  e1000e: update version number
  e1000e: fix close interrupt race
  e1000e: fix loss of multicast packets
  e1000e: commonize tx cleanup routine to match e1000 & igb
  netfilter: fix nf_logger name in ebt_ulog.
  netfilter: fix warning in ebt_ulog init function.
  netfilter: fix warning about invalid const usage
  e1000: fix close race with interrupt
  e1000: cleanup clean_tx_irq routine so that it completely cleans ring
  e1000: fix tx hang detect logic and address dma mapping issues
  bridge: bad error handling when adding invalid ether address
  bonding: select current active slave when enslaving device for mode tlb and alb
  gianfar: reallocate skb when headroom is not enough for fcb
  Bump release date to 25Mar2009 and version to 0.22
  r6040: Fix second PHY address
  qeth: fix wait_event_timeout handling
  qeth: check for completion of a running recovery
  qeth: unregister MAC addresses during recovery.
  ...

Manually fixed up conflicts in:
	drivers/infiniband/hw/cxgb3/cxio_hal.h
	drivers/infiniband/hw/nes/nes_nic.c
2009-03-26 15:54:36 -07:00
Alan Cox 7676b8fd70 dontdiff: Fix asm exclude
Now that the headers are in arch/foo/include/asm we don't want to exclude
them when preparing diff files.

Closes-bug: 12921

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-26 15:45:43 -07:00
Russell King f5f0e17a84 Merge branch 'next-s3c-pm' of git://aeryn.fluff.org.uk/bjdooks/linux into devel 2009-03-26 22:44:43 +00:00
David S. Miller 08abe18af1 Merge branch 'master' of /home/davem/src/GIT/linux-2.6/
Conflicts:
	drivers/net/wimax/i2400m/usb-notif.c
2009-03-26 15:23:24 -07:00
Linus Torvalds 61a091827e Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (97 commits)
  USB: qcserial: add device id for HP devices
  USB: isp1760: Add a delay before reading the SKIPMAP registers in isp1760-hcd.c
  USB: allow malformed LANGID descriptors
  USB: pxa27x_udc: typo fixes and code cleanups
  USB: gadget: gadget zero uses new suspend/resume hooks
  USB: gadget: composite device-level suspend/resume hooks
  USB: r8a66597-hcd: suspend/resume support
  USB: more u32 conversion after transfer_buffer_length and actual_length
  USB: Fix cp2101 USB serial device driver termios functions for console use
  USB: CP2101 New Device ID
  USB: ipaq: handle 4 endpoint devices
  USB: S3C: Move usb-control.h to platform include
  USB: ohci-hcd: Add ARCH_S3C24XX to the ohci-s3c2410.c glue
  USB: pedantic: spelling correction in comment for ch9.h
  USB: host: fix sparse warning: Using plain integer as NULL pointer
  USB: ohci-s3c2410: fix name of bus clock
  USB: ohci-s3c2410: remove <mach/hardware.h> include
  USB: serial: rename cp2101 driver to cp210x
  USB: CP2101 Reduce Error Logging
  USB: CP2101 Support AN205 baud rates
  ...
2009-03-26 11:17:39 -07:00
Linus Torvalds 0c93ea4064 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (61 commits)
  Dynamic debug: fix pr_fmt() build error
  Dynamic debug: allow simple quoting of words
  dynamic debug: update docs
  dynamic debug: combine dprintk and dynamic printk
  sysfs: fix some bin_vm_ops errors
  kobject: don't block for each kobject_uevent
  sysfs: only allow one scheduled removal callback per kobj
  Driver core: Fix device_move() vs. dpm list ordering, v2
  Driver core: some cleanup on drivers/base/sys.c
  Driver core: implement uevent suppress in kobject
  vcs: hook sysfs devices into object lifetime instead of "binding"
  driver core: fix passing platform_data
  driver core: move platform_data into platform_device
  sysfs: don't block indefinitely for unmapped files.
  driver core: move knode_bus into private structure
  driver core: move knode_driver into private structure
  driver core: move klist_children into private structure
  driver core: create a private portion of struct device
  driver core: remove polling for driver_probe_done(v5)
  sysfs: reference sysfs_dirent from sysfs inodes
  ...

Fixed conflicts in drivers/sh/maple/maple.c manually
2009-03-26 11:17:04 -07:00
Linus Torvalds 502012534d Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (430 commits)
  ALSA: hda - Add quirk for Acer Ferrari 5000
  ALSA: hda - Use cached calls to get widget caps and pin caps
  ALSA: hda - Don't create empty/single-item input source
  ALSA: hda - Fix the wrong pin-cap check in patch_realtek.c
  ALSA: hda - Cache pin-cap values
  ALSA: hda - Avoid output amp manipulation to digital mic pins
  ALSA: hda - Add function id to proc output
  ALSA: pcm - Safer boundary checks
  ALSA: hda - Detect digital-mic inputs on ALC663 / ALC272
  ALSA: sound/ali5451: typo: s/resouces/resources/
  ALSA: hda - Don't show the current connection for power widgets
  ALSA: Fix wrong pointer to dev_err() in arm/pxa2xx-ac97-lib.c
  ASoC: Declare Headset as Mic and Headphone widgets for SDP3430
  ASoC: OMAP: N810: Add more jack functions
  ASoC: OMAP: N810: Mark not connected input pins
  ASoC: Add FLL support for WM8400
  ALSA: hda - Don't reset stream at each prepare callback
  ALSA: hda - Don't reset BDL unnecessarily
  ALSA: pcm - Fix delta calculation at boundary overlap
  ALSA: pcm - Reset invalid position even without debug option
  ...
2009-03-26 11:05:17 -07:00
Linus Torvalds ada19a31a9 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: (35 commits)
  [CPUFREQ] Prevent p4-clockmod from auto-binding to the ondemand governor.
  [CPUFREQ] Make cpufreq-nforce2 less obnoxious
  [CPUFREQ] p4-clockmod reports wrong frequency.
  [CPUFREQ] powernow-k8: Use a common exit path.
  [CPUFREQ] Change link order of x86 cpufreq modules
  [CPUFREQ] conservative: remove 10x from def_sampling_rate
  [CPUFREQ] conservative: fixup governor to function more like ondemand logic
  [CPUFREQ] conservative: fix dbs_cpufreq_notifier so freq is not locked
  [CPUFREQ] conservative: amend author's email address
  [CPUFREQ] Use swap() in longhaul.c
  [CPUFREQ] checkpatch cleanups for acpi-cpufreq
  [CPUFREQ] powernow-k8: Only print error message once, not per core.
  [CPUFREQ] ondemand/conservative: sanitize sampling_rate restrictions
  [CPUFREQ] ondemand/conservative: deprecate sampling_rate{min,max}
  [CPUFREQ] powernow-k8: Always compile powernow-k8 driver with ACPI support
  [CPUFREQ] Introduce /sys/devices/system/cpu/cpu*/cpufreq/cpuinfo_transition_latency
  [CPUFREQ] checkpatch cleanups for powernow-k8
  [CPUFREQ] checkpatch cleanups for ondemand governor.
  [CPUFREQ] checkpatch cleanups for powernow-k7
  [CPUFREQ] checkpatch cleanups for speedstep related drivers.
  ...
2009-03-26 11:04:08 -07:00
Ingo Molnar e8684605ad Merge branch 'timers/hpet' into timers/core 2009-03-26 15:45:45 +01:00
Hendrik Brueckner 431429ff78 [S390] hvc_iucv: Provide IUCV z/VM user ID filtering
This patch introduces the kernel parameter hvc_iucv_allow= that specifies
a comma-separated list of z/VM user IDs.
If specified, the z/VM IUCV hypervisor console device driver accepts IUCV
connections from listed z/VM user IDs only.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-03-26 15:24:08 +01:00
Avishay Traeger 07e86f405a block: Repeated lines in switching-sched.txt
These lines appear in this file twice - removed one occurrence.

Signed-off-by: Avishay Traeger <avishay@il.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-03-26 11:01:28 +01:00
Russell King 8937b7349c Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel 2009-03-25 18:31:35 +00:00
Ingo Molnar b6d9842258 Merge branch 'sched/cleanups'; commit 'v2.6.29' into sched/core 2009-03-25 10:26:51 +01:00
Greg Banks 9898abb3d2 Dynamic debug: allow simple quoting of words
Allow simple quoting of words in the dynamic debug control language.

This allows more natural specification when using the control language
to match against printk formats, e.g

#echo -n 'format "Setting node for non-present cpu" +p' >
	/mnt/debugfs/dynamic_debug/control

instead of

#echo -n 'format Setting\040node\040for\040non-present\040cpu +p' >
	/mnt/debugfs/dynamic_debug/control

Adjust the dynamic debug documention to describe that and provide a
new example.  Adjust the existing examples in the documentation to
reflect the current whitespace escaping behaviour when reading the
control file.  Fix some minor documentation trailing whitespace.

Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:38:27 -07:00
Jason Baron 86151fdf38 dynamic debug: update docs
updates the documentation for 'dynamic debug' feature.

Signed-off-by: Greg Banks <gnb@sgi.com>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:38:27 -07:00
Jason Baron e9d376f0fa dynamic debug: combine dprintk and dynamic printk
This patch combines Greg Bank's dprintk() work with the existing dynamic
printk patchset, we are now calling it 'dynamic debug'.

The new feature of this patchset is a richer /debugfs control file interface,
(an example output from my system is at the bottom), which allows fined grained
control over the the debug output. The output can be controlled by function,
file, module, format string, and line number.

for example, enabled all debug messages in module 'nf_conntrack':

echo -n 'module nf_conntrack +p' > /mnt/debugfs/dynamic_debug/control

to disable them:

echo -n 'module nf_conntrack -p' > /mnt/debugfs/dynamic_debug/control

A further explanation can be found in the documentation patch.

Signed-off-by: Greg Banks <gnb@sgi.com>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:38:26 -07:00
Hans J. Koch 8205779114 UIO: Add name attributes for mappings and port regions
If a UIO device has several memory mappings, it can be difficult for userspace
to find the right one. The situation becomes even worse if the UIO driver can
handle different versions of a card that have different numbers of mappings.
Benedikt Spranger has such cards and pointed this out to me. Thanks, Bene!

To address this problem, this patch adds "name" sysfs attributes for each
mapping. Userspace can use these to clearly identify each mapping. The name
string is optional. If a driver doesn't set it, an empty string will be
returned, so this patch won't break existing drivers.

The same problem exists for port region information, so a "name" attribute is
added there, too.

Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:38:24 -07:00
Pete Zaitcev 471c604daf USB: usbmon: Add binary API v1
This patch adds an extension to the binary API so it reaches parity with
existing text API (so-called "1u"). The extension delivers additional data,
such as ISO descriptors and the interrupt interval.

Signed-Off-By: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:20:36 -07:00
Russell King fbf2b1f9cf Merge branch 'highmem' into devel 2009-03-24 22:47:45 +00:00
Jody McIntyre 0a5d649018 tracing: Documentation / sample code fixes for tracepoints
Fix the tracepoint documentation to refer to "tracepoint-sample"
instead of "tracepoint-example" to match what actually exists;
fix the directory, and clarify how to compile.

Change every instance of "example" in the sample tracepoint code
to "sample" for consistency.

Signed-off-by: Jody McIntyre <scjody@sun.com>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: torvalds@linux-foundation.org
LKML-Reference: <20090324200027.GH8294@clouds>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-24 22:32:12 +01:00
Ingo Molnar 29219683c4 Merge branches 'x86/apic', 'x86/cleanups', 'x86/mm', 'x86/pat', 'x86/setup' and 'x86/signal'; commit 'v2.6.29' into x86/core 2009-03-24 15:19:45 +01:00
Benjamin Herrenschmidt 9e41d9597e Merge commit 'origin/master' into next 2009-03-24 13:38:30 +11:00
Jarkko Nikula 7954763bb9 ARM: OMAP: Add method to register additional I2C busses on the command line, v2
This patch extends command line option "i2c_bus=bus_id,clkrate" so that
it allow to register additional I2C busses that are not registered with
omap_register_i2c_bus from board initialization code.

Purpose of this is to register additional board busses which are routed
to external connectors only without any on board I2C devices.

Cc: linux-i2c@vger.kernel.org
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:51:20 -07:00
Jarkko Nikula 3a853fb933 ARM: OMAP: Add command line option for I2C bus speed, v2
This patch adds a new command line option "i2c_bus=bus_id,clkrate" into
I2C bus registration helper. Purpose of the option is to override the
default board specific bus speed which is supplied by the
omap_register_i2c_bus.

The default bus speed is typically set to speed of slowest I2C chip on the
bus and overriding allow to use some experimental configurations or updated
chip versions without any kernel modifications.

Cc: linux-i2c@vger.kernel.org
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:51:20 -07:00
James Morris 703a3cd728 Merge branch 'master' into next 2009-03-24 10:52:46 +11:00
Takashi Iwai b54fc8dd2c Merge branch 'topic/oxygen' into for-linus 2009-03-24 00:36:17 +01:00
Takashi Iwai 9fb5430c3d Merge branch 'topic/oss-fix' into for-linus 2009-03-24 00:36:16 +01:00
Takashi Iwai 4c5ecb7e59 Merge branch 'topic/msnd' into for-linus 2009-03-24 00:36:15 +01:00
Takashi Iwai e7bfbb0215 Merge branch 'topic/hda' into for-linus 2009-03-24 00:36:09 +01:00
Takashi Iwai f11a936fe7 Merge branch 'topic/docbook-fix' into for-linus 2009-03-24 00:36:02 +01:00
Takashi Iwai a3c6048dcf Merge branch 'topic/cs423x-merge' into for-linus 2009-03-24 00:35:59 +01:00
Takashi Iwai b5c784894c Merge branch 'topic/asoc' into for-linus 2009-03-24 00:35:53 +01:00
Takashi Iwai ec6659c389 Merge branch 'topic/vmaster-update' into for-linus 2009-03-24 00:35:47 +01:00
Takashi Iwai 5b56eec774 Merge branch 'topic/jack' into for-linus 2009-03-24 00:35:43 +01:00
Takashi Iwai dec14f8c0e Merge branch 'topic/snd_card_new-err' into for-linus 2009-03-24 00:35:35 +01:00
Jody McIntyre 1db4b2d221 trivial: fix orphan dates in ext2 documentation
Revert the change to the orphan dates of Windows 95, DOS, compression.
Add a new orphan date for OS/2.

Signed-off-by: Jody McIntyre <scjody@sun.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-23 14:21:26 -07:00
Linus Torvalds d56ffd38a9 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (32 commits)
  ucc_geth: Fix oops when using fixed-link support
  dm9000: locking bugfix
  net: update dnet.c for bus_id removal
  dnet: DNET should depend on HAS_IOMEM
  dca: add missing copyright/license headers
  nl80211: Check that function pointer != NULL before using it
  sungem: missing net_device_ops
  be2net: fix to restore vlan ids into BE2 during a IF DOWN->UP cycle
  be2net: replenish when posting to rx-queue is starved in out of mem conditions
  bas_gigaset: correctly allocate USB interrupt transfer buffer
  smsc911x: reset last known duplex and carrier on open
  sh_eth: Fix mistake of the address of SH7763
  sh_eth: Change handling of IRQ
  netns: oops in ip[6]_frag_reasm incrementing stats
  net: kfree(napi->skb) => kfree_skb
  net: fix sctp breakage
  ipv6: fix display of local and remote sit endpoints
  net: Document /proc/sys/net/core/netdev_budget
  tulip: fix crash on iface up with shirq debug
  virtio_net: Make virtio_net support carrier detection
  ...
2009-03-23 09:25:58 -07:00
Ingo Molnar b3e3b302cf Merge branches 'irq/sparseirq' and 'linus' into irq/core 2009-03-23 10:07:49 +01:00
Alex Chiang f110ca489c PCI Hotplug: schedule fakephp for feature removal
Now that the PCI core is capable of function-level remove and rescan
as well as bus-level rescan, there's no functional need to keep fakephp
anymore.

We keep it around for userspace compatibility reasons, schedule removal
in three years.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 14:59:45 -07:00
Alex Chiang 738a6396c2 PCI: Introduce /sys/bus/pci/devices/.../rescan
This interface allows the user to force a rescan of the device's
parent bus and all subordinate buses, and rediscover devices removed
earlier from this part of the device tree.

Cc: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 14:59:07 -07:00
Alex Chiang 77c27c7b49 PCI: Introduce /sys/bus/pci/devices/.../remove
This patch adds an attribute named "remove" to a PCI device's sysfs
directory.  Writing a non-zero value to this attribute will remove the PCI
device and any children of it.

Trent Piepho wrote the original implementation and documentation.

Thanks to Vegard Nossum for testing under kmemcheck and finding locking
issues with the sysfs interface.

Cc: Trent Piepho <xyzzy@speakeasy.org>
Tested-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 14:58:48 -07:00
Alex Chiang 705b1aaa82 PCI: Introduce /sys/bus/pci/rescan
This interface allows the user to force a rescan of all PCI buses
in system, and rediscover devices that have been removed earlier.

pci_bus_attrs implementation from Trent Piepho.

Thanks to Vegard Nossum for discovering locking issues with the
sysfs interface.

Cc: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 14:57:58 -07:00
Michael Ellerman fafad5bf06 PCI MSI: Add example request loop to MSI-HOWTO.txt
Encourage driver writers to think about supporting a variable number
of MSI-X interrupts, and give an example of how to do such a
request.

Acked-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 11:35:04 -07:00
Yu Zhao 15b49bee3a PCI: manual for SR-IOV user and driver developer
Reviewed-by: Randy Dunlap <rdunlap@xenotime.net>
Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 10:48:33 -07:00
Yu Zhao 01db495717 PCI: document SR-IOV sysfs entries
Reviewed-by: Randy Dunlap <rdunlap@xenotime.net>
Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 10:48:32 -07:00
Yuji Shimada 32a9a682be PCI: allow assignment of memory resources with a specified alignment
This patch allows memory resources to be assigned with a specified
alignment at boot-time or run-time. The patch is useful when we use PCI
pass-through, because page-aligned memory resources are required to
securely share PCI resources with guest drivers.

If you want to assign the resource at boot time, please set
"pci=resource_alignment=" boot parameter.

This is format of "pci=resource_alignment=" boot parameter:

        [<order of align>@][<domain>:]<bus>:<slot>.<func>[; ...]
                Specifies alignment and device to reassign
                aligned memory resources.
                If <order of align> is not specified, PAGE_SIZE is
                used as alignment.
                PCI-PCI bridge can be specified, if resource
                windows need to be expanded.

This is example:

        pci=resource_alignment=20@07:00.0;18@0f:00.0;00:1d.7

If you want to assign the resource at run-time, please set
"/sys/bus/pci/resource_alignment" file, and hot-remove the device and
hot-add the device.  For this purpose, fakephp or PCI hotplug interfaces
can be used.

The format of "/sys/bus/pci/resource_alignment" file is the same with
boot parameter. You can use "," instead of ";".

For example:

        # cd /sys/bus/pci
        # echo -n 20@12:00.0 > resource_alignment
        # echo 1 > devices/0000:12:00.0/remove
        # echo 1 > rescan

Reviewed-by: Alex Chiang <achiang@hp.com>
Reviewed-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: Yuji Shimada <shimada-yxb@necst.nec.co.jp>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 10:48:15 -07:00
Matthew Wilcox 1c8d7b0a56 PCI MSI: Add support for multiple MSI
Add the new API pci_enable_msi_block() to allow drivers to
request multiple MSI and reimplement pci_enable_msi in terms of
pci_enable_msi_block.  Ensure that the architecture back ends don't
have to know about multiple MSI.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 10:48:14 -07:00
Matthew Wilcox c41ade2ee1 Rewrite MSI-HOWTO
I didn't find the previous version very useful, so I rewrote it.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Reviewed-by: Randy Dunlap <randy.dunlap@oracle.com>
Reviewed-by: Grant Grundler <grundler@parisc-linunx.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 10:48:11 -07:00
Chris Wright 0994375e96 PCI: add remove_id sysfs entry
This adds a remove_id sysfs entry to allow users of new_id to later
remove the added dynid.  One use case is management tools that want to
dynamically bind/unbind devices to pci-stub driver while devices are
assigned to KVM guests.  Rather than having to track which driver was
originally bound to the driver, a mangement tool can simply:

Guest uses device

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 10:48:11 -07:00
David S. Miller 2b1c4354de Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/virtio_net.c
2009-03-20 02:27:41 -07:00
Bjorn Helgaas 1cc0ca26c5 PCI/x86: document pci=earlydump argument
Document the "pci=earlydump" argument.  This currently only works on x86.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-19 19:29:19 -07:00
Stanislaw Gruszka e9c6a586f5 net: Document /proc/sys/net/core/netdev_budget
The NAPI poll parameter netdev_budget is not documented in
kernel-docs. Since it may have a substantial effect on at least some
network loads, it should be.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> 
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-18 18:51:06 -07:00
Brian Haley 9bdd8d40c8 ipv6: Fix incorrect disable_ipv6 behavior
Fix the behavior of allowing both sysctl and addrconf_dad_failure()
to set the disable_ipv6 parameter without any bad side-effects.
If DAD fails and accept_dad > 1, we will still set disable_ipv6=1,
but then instead of allowing an RA to add an address then
immediately fail DAD, we simply don't allow the address to be
added in the first place.  This also lets the user set this flag
and disable all IPv6 addresses on the interface, or on the entire
system.

Signed-off-by: Brian Haley <brian.haley@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-18 18:22:48 -07:00
Ingo Molnar 705bb9dc72 Merge branches 'x86/cleanups', 'x86/cpu', 'x86/debug', 'x86/mce2', 'x86/mm', 'x86/mtrr', 'x86/setup', 'x86/setup-memory', 'x86/urgent', 'x86/uv', 'x86/x2apic' and 'linus' into x86/core
Conflicts:
	arch/parisc/kernel/irq.c
2009-03-18 13:19:49 +01:00
Ingo Molnar 95f3c4ebff Merge branch 'dma-api/debug' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu into core/iommu 2009-03-18 10:37:48 +01:00
Ingo Molnar 37ba317c9e Merge branches 'sched/cleanups' and 'linus' into sched/core 2009-03-18 09:57:02 +01:00
Ingo Molnar 03418c7efa Merge branches 'tracing/ftrace' and 'linus' into tracing/core 2009-03-18 06:58:45 +01:00
Joerg Roedel 187f9c3f05 dma-debug: Documentation update
Impact: add documentation about DMA-API debugging to DMA-API.txt

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-03-17 12:56:47 +01:00
Rusty Russell 8032b526d1 linux.conf.au 2009: Tuz
Impact: help prevent extinction of species

The Tasmanian Devil is a shy iconic Australian creature named for its
spine-chilling screech.  It is threatened with extinction due to a
scientifically interesting but horrific transmissible facial cancer.

This one is standing in for Tux for one release using the far less-known
Devil Facial Tux Disguise.

	Save The Tasmanian Devil http://tassiedevil.com.au

Signed-off-by: Linux.conf.au Hobart Team <contact@marchsouth.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-16 07:55:37 -07:00
Jonathan Corbet 76398425bb Move FASYNC bit handling to f_op->fasync()
Removing the BKL from FASYNC handling ran into the challenge of keeping the
setting of the FASYNC bit in filp->f_flags atomic with regard to calls to
the underlying fasync() function.  Andi Kleen suggested moving the handling
of that bit into fasync(); this patch does exactly that.  As a result, we
have a couple of internal API changes: fasync() must now manage the FASYNC
bit, and it will be called without the BKL held.

As it happens, every fasync() implementation in the kernel with one
exception calls fasync_helper().  So, if we make fasync_helper() set the
FASYNC bit, we can avoid making any changes to the other fasync()
functions - as long as those functions, themselves, have proper locking.
Most fasync() implementations do nothing but call fasync_helper() - which
has its own lock - so they are easily verified as correct.  The BKL had
already been pushed down into the rest.

The networking code has its own version of fasync_helper(), so that code
has been augmented with explicit FASYNC bit handling.

Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: David Miller <davem@davemloft.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2009-03-16 08:32:27 -06:00