There are three minor changes I would like to do on my last patch:
* Comedi is formally not dependant on any hardware, e.g. it is possible
to use comedi_test without (PCI || PCMCIA || PCCARD || USB || ISA)
* comedi_parport is not dependant on PARPORT_PC.
* indirect ni_mio_cs (16-bit PCMCIA) dependancy on mite PCI-chip may
confuse users, thus changing COMEDI_NI_TIO depends on COMEDI_MITE
to select COMEDI_MITE.
Signed-off-by: Alexander Kurz <linux@kbdbabel.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We need the 8255 module to be present for some PCI comedi
modules. So for now, just build the thing. We need some better
Kconfig rules to figure this out properly.
Cc: Alexander Kurz <linux@blala.de>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
PC/104-drivers went into ISA,
PC/104+ went into PCI,
Drivers without a bustype went into "misc".
In doubt drivers supporting both ISA/PCI went into PCI.
Drivers without any detailed hardware info went into ISA, e.g. fl512.c
Some NI drivers are used by other NI drivers from different bustypes
are grouped seperately in NI_COMMON.
[tweaked by gregkh to handle the new driver recently added]
Signed-off-by: Alexander Kurz <linux@kbdbabel.org>
Acked-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@speakeasy.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There is no need trying to load the (even in most cases) not availible
firmware after suspend. This saves about 30 secounds on reset waiting
for timeout.
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use kmemdup when some other buffer is immediately copied into the
allocated region.
A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression from,to,size,flag;
statement S;
@@
- to = \(kmalloc\|kzalloc\)(size,flag);
+ to = kmemdup(from,size,flag);
if (to==NULL || ...) S
- memcpy(to, from, size);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use kcalloc or kzalloc rather than the combination of kmalloc and memset.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x,y,flags;
statement S;
type T;
@@
x =
- kmalloc
+ kcalloc
(
- y * sizeof(T),
+ y, sizeof(T),
flags);
if (x == NULL) S
-memset(x, 0, y * sizeof(T));
@@
expression x,size,flags;
statement S;
@@
-x = kmalloc(size,flags);
+x = kzalloc(size,flags);
if (x == NULL) S
-memset(x, 0, size);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
This is a patch to the file udlfb.c that fixes a missing KERN_INFO and
removes one whitespace before a newline.
Signed-off-by: Soeren Moeller <soerenmoeller2001@gmail.com>
Cc: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch introduces a v4l2 state machine, so now
CONFIG_DT3155_STREAMING is no more needed.
Signed-off-by: Marin Mitov <mitov@issp.bas.bg>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the r8180_core.c file that fixes the C99 comments
style issues found by the checkpatch.pl tool.
Signed-off-by: Prashant P. Shah <pshah.mumbai@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the r8180_core.c file that fixes the space
style issues found by the checkpatch.pl tool.
Signed-off-by: Prashant P. Shah <pshah.mumbai@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
added the necessary infrastructure for the leds on the device
this is a port from Realteks driver.
leds are now working partially.
Signed-off-by: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patches fixes some long line lengths in comedi.h from checkpatch.pl
Signed-off-by: Mark Rankilor <reodge@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patches fixes long line lengths in comedi.h that were picked up by
checkpatch.pl
Signed-off-by: Mark Rankilor <reodge@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
this adds and sorts the module labels MODULE_AUTHOR, MODULE_DESCRIPTION
and MODULE_LICENSE for all comedi PCMCIA drivers.
Signed-off-by: Alexander Kurz <linux@kbdbabel.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes lots of long line lengths in comedi_fops.c found by
checkpatch.pl
Signed-off-by: Mark Rankilor <reodge@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fixes the driver after merge into the 2.6.34 kernel. Driver should
be functional again (a fix to make it compile broke the driver).
Patch against 2.6.34 RC7 with patch-v2.6.34-rc7-next-20100513
already applied.
Removed conditional code based on kernel version, this is pointless
now the driver is part of the kernel. Also removed obsolte code
left over from previous patches. Includes also small fixes to compile
clean again.
Signed-off-by: Henk de Groot <pe1dnn@amsat.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Currently, each ramzswap device can be assigned
a separate 'backing swap' file/partition. The ramzswap
driver forwards swap I/O requests to this backing swap
whenever an incompressible page is found.
This feature adds nearly 700 lines of code and it
also duplicates much of the swapon() functionality
(for example, finding swap extents and so on). Removing
this code makes the driver much simpler and should
help its transition from staging to stable drivers
area (drivers/block/).
Similar functionality may be implemented if we can
implement migrating pages across swap devices but the
details have not yet been worked out.
Support for _partitions_ as backing swap could be
retained as it requires a few lines of code only.
This part can be re-introduced later if above swap
migration method turns out to be infeasible.
More cleanups and code comments will be added soon.
Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove empty OUT definition used to specify output parameters.
Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove empty IN definition used to specify input parameters.
Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed custom macro for signed 8-bit integers, which was not used.
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed custom macro for unsigned 32-bit integers.
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed custom macro for unsigned 16-bit integers.
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed custom macro for unsigned 8-bit integers.
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Part of this code is already in my MSM tree. I'll move the rest
forward through my tree also.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
CC: Pavel Machek <pavel@ucw.cz>
CC: linux-arm-msm@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove all rcu head inits. We don't care about the RCU head state before
passing it to call_rcu() anyway. Only leave the "on_stack" variants so
debugobjects can keep track of objects on stack.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Cc: Marek Lindner <lindner_marek@yahoo.de>
Cc: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the usbdux.c file that resolve 2 errors in coding and
fix the warning about lengt of code lines
Signed-off-by: Morgan Gatti <morgan.gatti@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Cleared all findings but a couple of 'do not add new typedefs' warnings.
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Drop cast on the result of kmalloc and similar functions.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
type T;
@@
- (T *)
(\(kmalloc\|kzalloc\|kcalloc\|kmem_cache_alloc\|kmem_cache_zalloc\|
kmem_cache_alloc_node\|kmalloc_node\|kzalloc_node\)(...))
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan said that memrar should depend on RAR_REGISTER
(instead of selecting it).
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Ossama Othman <ossama.othman@intel.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the wl_profile.c file that fixes the C99 comments
style issues found by the checkpatch.pl tool.
Signed-off-by: Prashant P. Shah <pshah.mumbai@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes quite a few long line lengths in comedi.h as reported by
checkpatch.pl
Signed-off-by: Mark Rankilor <reodge@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In http://bugzilla.novell.com/show_bug.cgi?id=597299, the vt6655 driver
generates a kernel BUG on a NULL pointer dereference at NULL. This problem
has been traced to a failure in the wpa_set_wpadev() routine. As the vt6656
driver does not call this routine, the vt6655 code is similarly set to skip
the call.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: Richard Meek <osl2008@googlemail.com>
Cc: Stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Resolved all warnings/errors but lines having over 80 characters.
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now that the code actually gets selected in the kernel config
properly, all of the build errors start showing up.
This patch papers over a few of them to get the code to build, I have
no idea if it actually works now or not...
Cc: Henk de Groot <pe1dnn@amsat.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Change the wireless drivers to depend on CONFIG_WLAN instead of
CONFIG_WLAN_80211 which is gone.
Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Credits go to Joe Perches <joe@perches.com> for suggesting the changes.
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the wl_profile.c file that fixes the unnecessary braces
style issues found by the checkpatch.pl tool.
Signed-off-by: Prashant P. Shah <pshah.mumbai@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the wl_profile.c file that fixes whitespace
issues found by the checkpatch.pl tool.
Signed-off-by: Prashant P. Shah <pshah.mumbai@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The previous patch "use_local_copy_qtype_ops.patch"
http://lkml.org/lkml/2010/5/9/40
has introduced a new BUG.
This patch corrects it.
Signed-off-by: Marin Mitov <mitov@issp.bas.bg>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
dt3155v4l driver, as in -rc6-next-20100506 has a BUG.
When it modifies q->int_ops structure in videobuf-dma-contig
module the change is visible for all other modules using it.
Make a local copy of this structure and use its modification
to solve the bug.
Signed-off-by: Marin Mitov <mitov@issp.bas.bg>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
