Commit Graph

114 Commits

Author SHA1 Message Date
Eddie Wai b98eba5278 bnx2: Fix register printouts during NETEV_WATCHDOG.
Dump the correct MCP registers and add EMAC_RX_STATUS register during
NETDEV_WATCHDOG for debugging.

Signed-off-by: Eddie Wai <waie@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17 17:32:56 -07:00
Michael Chan a33fa66bcf bnx2: Add prefetches to rx path.
Add prefetches of the skb and the next rx descriptor to speed up rx path.

Use prefetchw() for the skb [suggested by Eric Dumazet].

The rx descriptor is in skb->data which is mapped for streaming mode DMA.
Eric Dumazet pointed out that we should not prefetch the data before
dma_sync.  So we prefetch only if dma_sync is no_op on the system.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06 22:17:24 -07:00
FUJITA Tomonori 1a4ccc2d46 bnx2: use the dma state API instead of the pci equivalents
The DMA API is preferred.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07 21:05:35 -07:00
Michael Chan 5726026bff bnx2: Adjust flow control water marks.
The current water marks are too high and can cause unnecessary flow
control frames.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16 15:19:03 -08:00
Michael Chan 354fcd7774 bnx2: Save statistics during reset.
MTU changes, ring size changes, etc cause the chip to be reset and the
statisctics flushed.  To keep track of the accumulated statistics, we
add code to save the whole statistics block before reset.  We also
modify the macros and statistics functions to return the sum of the
saved and current counters.

Based on original patch by Breno Leitao <leitao@linux.vnet.ibm.com>

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-17 19:16:03 -08:00
Michael Chan 20175c57f2 bnx2: Dump some state during tx timeout.
To help debug the problem.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03 13:18:11 -08:00
Alexander Duyck e95524a726 bnx2: remove skb_dma_map/unmap calls from driver
Due to the fact that skb_dma_map/unmap do not work correctly when a HW
IOMMU is enabled it has been recommended to go about removing the calls
from the network device drivers.

[ Fix bnx2_free_tx_skbs() ring indexing and use NETDEV_TX_OK return
  code in bnx2_start_xmit() after cleaning up DMA mapping errors. -Mchan ]

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02 19:57:13 -08:00
Michael Chan d0549382da cnic: Fix L2CTX_STATUSB_NUM offset in context memory.
The BNX2_L2CTX_STATUSB_NUM definition needs to be changed to match
the recent firmware update:

commit 078b073588
bnx2: Update firmware to 5.0.0.j3.

Without the fix, bnx2 can crash intermittently in bnx2_rx_int() when
iSCSI is enabled.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28 03:41:59 -07:00
David S. Miller 6cdee2f96a Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/yellowfin.c
2009-09-02 00:32:56 -07:00
Michael Chan 0ced9d01d1 bnx2: Use const on flash_table structure.
The structure, once initialized, never changes.

Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-22 17:48:54 -07:00
Michael Chan 61d9e3fa7e bnx2: Apply BROKEN_STATS workaround to 5706 and 5708.
Add flag to expand the workaround to both chips.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-22 17:48:48 -07:00
Michael Chan c5a8895082 bnx2: Use mutex on slow path cnic calls.
The slow path calls to the cnic driver are sleepable calls so we
cannot use rcu_read_lock().  Use mutex for these slow path calls
instead.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-15 18:50:44 -07:00
David S. Miller 9cbc1cb8cd Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:
	Documentation/feature-removal-schedule.txt
	drivers/scsi/fcoe/fcoe.c
	net/core/drop_monitor.c
	net/core/net-traces.c
2009-06-15 03:02:23 -07:00
Michael Chan 4edd473f20 [SCSI] bnx2: Add support for CNIC driver.
Add interface and functions to support a new CNIC driver to drive
the Broadcom bnx2 hardware for iSCSI offload.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-09 10:22:38 -05:00
Eric Dumazet d62fda082c bnx2: bnx2_tx_int() optimizations
When using bnx2 in a high transmit load, bnx2_tx_int() cost is pretty high.

There are two reasons.

One is an expensive call to bnx2_get_hw_tx_cons(bnapi) for each freed skb

One is cpu stalls when accessing skb_is_gso(skb) / skb_shinfo(skb)->nr_frags
because of two cache line misses.
(One to get skb->end/head to compute skb_shinfo(skb),
 one to get is_gso/nr_frags)

This patch :

1) avoids calling bnx2_get_hw_tx_cons(bnapi) too many times.

2) makes bnx2_start_xmit() cache is_gso & nr_frags into sw_tx_bd descriptor.
   This uses a litle bit more ram (256 longs per device on x86), but helps a lot.

3) uses a prefetch(&skb->end) to speedup dev_kfree_skb(), bringing
  cache line that will be needed in skb_release_data()

result is 5 % bandwidth increase in benchmarks, involving UDP or TCP receive
 & transmits, when a cpu is dedicated to ksoftirqd for bnx2.

bnx2_tx_int going from 3.33 % cpu to 0.5 % cpu in oprofile

Note : skb_dma_unmap() still very expensive but this is for another patch,
not related to bnx2 (2.9 % of cpu, while it does nothing on x86_32)

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-17 20:47:44 -07:00
Michael Chan 57579f7629 bnx2: Use request_firmware()
Based on original patch by Ben Hutchings <ben@decadent.org.uk> and
Bastian Blank <waldi@debian.org>, with the following main changes:

Separated the mips firmware and rv2p firmware into different files
to make it easier to update them separately.

Added some code to fixup the rv2p code with run-time information
such as PAGE_SIZE.

Update version to 2.0.0.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-04 16:51:14 -07:00
Michael Chan a6952b5299 bnx2: Update version to 1.9.2 and copyright.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12 16:54:48 -08:00
David S. Miller f6d52432a4 bnx2: Don't redefine FLOW_CTRL_{RX,TX}.
They are provided generically by linux/mii.h now.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 23:54:23 -08:00
Michael Chan 4e1d0de95c bnx2: Rename MSI-X vectors.
Change MSI-X vector names to "ethx-%d".

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 20:27:45 -08:00
David S. Miller 730c30ec64 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/net/wireless/iwlwifi/iwl-core.c
	drivers/net/wireless/iwlwifi/iwl-sta.c
2008-12-05 22:54:40 -08:00
Michael Chan efba01803c bnx2: Add workaround to handle missed MSI.
The bnx2 chips do not support per MSI vector masking.  On 5706/5708, new MSI
address/data are stored only when the MSI enable bit is toggled.  As a result,
SMP affinity no longer works in the latest kernel.  A more serious problem is
that the driver will no longer receive interrupts when the MSI receiving CPU
goes offline.

The workaround in this patch only addresses the problem of CPU going offline.
When that happens, the driver's timer function will detect that it is making
no forward progress on pending interrupt events and will recover from it.

Eric Dumazet reported the problem.

We also found that if an interrupt is internally asserted while MSI and INTA
are disabled, the chip will end up in the same state after MSI is re-enabled.
The same workaround is needed for this problem. 

Signed-off-by: Michael Chan <mchan@broadcom.com>
Tested-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03 00:36:15 -08:00
Ilpo Järvinen d8e8034dcd bnx2: use net_device_stats nowadays available in net_device
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-28 15:52:43 -08:00
Michael Chan 40105c0b07 bnx2: Reorganize timeout constants.
Move all related timeout constants to the same location.  BNX2
prefix is also added to make them more consistent.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-12 16:02:45 -08:00
Michael Chan d8026d9394 bnx2: Set rx buffer water marks based on MTU.
The default rx buffer water marks for XOFF/XON are for 1500 MTU.  At
larger MTUs, these water marks need to be adjusted for effective
flow control.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-12 16:02:20 -08:00
Benjamin Li 3d16af8665 bnx2: Handle DMA mapping errors.
Before, the driver would not care about the return codes from pci_map_*
functions.  This could be potentially dangerous if a mapping failed.
Now, we will check all pci_map_* calls.  On the transmit side, we switch
to use the new function skb_dma_map().  On the receive side, we add
pci_dma_mapping_error().

Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-09 12:26:41 -07:00
David S. Miller b262e60309 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/net/wireless/ath9k/core.c
	drivers/net/wireless/ath9k/main.c
	net/core/dev.c
2008-10-01 06:12:56 -07:00
Benjamin Li 27ed9ddfde bnx2: Promote vector field in bnx2_irq structure from u16 to unsigned int
The bnx2 driver stores/uses the irq value from the pci_dev internally.
But when it stores the irq value, it has been performing an
integer demotion.  Because of the recent changes made to
arch/x86/kernel/io_apic.c, the new method in creating the irq value
(using build_irq_for_pci_dev()) has exposed this bug on x86 systems.

Because of this demotion when calling request_irq() from
bnx2_request_irq(), the driver would get a return code of -EINVAL.
This is because the kernel could not find the requested irq descriptor.
By storing the irq value properly, the kernel can find the correct
irq descriptor and the bnx2 driver can operate normally.

Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-18 16:46:11 -07:00
Benjamin Li ac392abce9 bnx2: Remove timer_interval field from the bnx2 structure
The timer_interval field is only assigned once, and never reassigned.
We can safely replace all instances of the timer_interval with a
constant value.

Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-18 16:40:49 -07:00
Benjamin Li fbbf68b7f8 bnx2: Remove name field from bnx2 structure
The name of the board is only used during the initialization of
the adapter.  We can save the space of a pointer by not storing
this information.

Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-18 16:40:03 -07:00
Benjamin Li 706bf24038 bnx2: Add TX multiqueue support.
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-18 17:55:11 -07:00
Benjamin Li 5fcaed0124 bnx2: Support secondary MAC addresses.
Add support for configuring secondary unicast addresses.  There
are 4 additional perfect match filters which can be used for
secondary unicast address support.

  *  Modified bnx2_set_mac_addr() to be more generic in handling
     the setting of the perfect match filters
  *  Changed bnx2_set_rx_mode() to handle the unicast dev_addr_list

Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14 22:39:52 -07:00
Michael Chan 7c62e83beb bnx2: Allow flexible VLAN tag settings.
Negotiate with boot code and ASF firmware to see if it can
support keeping VLAN tags in the RX packets.  If supported
by firmware, the VLAN tag will be kept in the RX packet
unless VLAN acceleration is registered.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14 22:39:03 -07:00
Michael Chan 5e9ad9e108 bnx2: Turn on multi rx rings.
Enable multiple rx rings if MSI-X vectors are available.  We enable
up to 7 rx rings.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-19 16:43:17 -07:00
Michael Chan 43e80b89b6 bnx2: Optimize fast-path tx and rx work.
Add hw_tx_cons_ptr and hw_rx_cons_ptr to speed up the retreival of
the tx and rx consumer index, since the MSI-X and default status
blocks have different structures.

Combine status_blk and status_blk_msix into a union.  We'll only use
one type of status block for each vector.

Separate the code to detect more rx and tx work from the code to
detect link related work.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-19 16:41:08 -07:00
Michael Chan bb4f98abf5 bnx2: Put rx ring variables in a separate struct.
In preparation for multi-ring support, rx ring variables are now put
in a separate bnx2_rx_ring_info struct.  With MSI-X, we can support
multiple rx rings.

The functions to allocate/free rx memory and to initialize rx rings
are now modified to handle multiple rings.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-19 16:38:19 -07:00
Michael Chan 35e9010b22 bnx2: Put tx ring variables in a separate struct.
In preparation for multi-ring support, tx ring variables are now put
in a separate bnx2_tx_ring_info struct.  Multi tx ring will not be
enabled until it is fully supported by the stack.  Only 1 tx ring
will be used at the moment.

The functions to allocate/free tx memory and to initialize tx rings
are now modified to handle multiple rings.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-19 16:37:42 -07:00
David S. Miller 4ae127d1b6 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/net/smc911x.c
2008-06-13 20:52:39 -07:00
David S. Miller 4bb073c0e3 net: Eliminate flush_scheduled_work() calls while RTNL is held.
If the RTNL is held when we invoke flush_scheduled_work() we could
deadlock.  One such case is linkwatch, it is a work struct which tries
to grab the RTNL semaphore.

The most common case are net driver ->stop() methods.  The
simplest conversion is to instead use cancel_{delayed_}work_sync()
explicitly on the various work struct the driver uses.

This is an OK transformation because these work structs are doing
things like resetting the chip, restarting link negotiation, and so
forth.  And if we're bringing down the device, we're about to turn the
chip off and reset it anways.  So if we cancel a pending work event,
that's fine here.

Some drivers were working around this deadlock by using a msleep()
polling loop of some sort, and those cases are converted to instead
use cancel_{delayed_}work_sync() as well.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-12 02:22:02 -07:00
Benjamin Li 601d3d18b2 bnx2: Rename RX_COPY_THRESH to BNX2_RX_COPY_THRESH.
To make the bnx2 code more consistent, all instances of
RX_COPY_THRESH have been changed to BNX2_RX_COPY_THRESH.

Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-16 22:19:35 -07:00
Benjamin Li d89cb6af41 bnx2: Remove the rx_offset field from the bnx2 structure.
The rx_offset field is set to a constant value and initialized
only once.  By replacing all references to the rx_offset field,
we can eliminate rx_offset from the bnx2 structure.  This will
save 4 bytes for every bnx2 instance.

[Added parentheses to the definition of BNX2_RX_OFFSET, as noted
by Ben Hutchings.]

Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-16 22:18:57 -07:00
Michael Chan 38ea3686f6 [BNX2]: Disable parallel detect on an HP blade.
Because of some board issues, we need to disable parallel detect on
an HP blade.  Without this patch, the link state can become stuck
when it goes into parallel detect mode.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-23 19:48:57 -08:00
Michael Chan 83e3fc89bb [BNX2]: Fine-tune flow control on 5709.
Make use of the programmable high/low water marks in 5709 for
802.3 flow control.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:16 -08:00
Michael Chan 62a8313cdd [BNX2]: Remove CTX_WR macro.
The CTX_WR macro is unnecessary and obfuscates the code.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:15 -08:00
Michael Chan 2726d6e126 [BNX2]: Remove REG_WR_IND/REG_RD_IND macros.
The REG_WR_IND/REG_RD_IND macros are unnecessary and obfuscate the
code.  Many callers to these macros read and write shared memory from
the bp->shmem_base, so we add 2 similar functions that automatically
add the shared memory base.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:14 -08:00
Michael Chan 6f743ca052 [BNX2]: Refine tx coalescing setup.
Make the tx coalescing setup code independent of the MSIX vector.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:13 -08:00
Michael Chan f3014c0cb6 [BNX2]: Fix 5706 serdes link down bug.
1. Correct the MII expansion serdes control register definition.
2. Check an additional RUDI_INVALID bit when determining 5706S link.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:12 -08:00
Al Viro b491edd581 bnx2 annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:10:32 -08:00
Michael Chan 583c28e564 [BNX2]: Fix driver phy_flags name space.
Prefix "bp->phy_flags" names with BNX2_PHY_FLAG_* for consistency.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:10:23 -08:00
David S. Miller f86e82fb54 [BNX2]: Fix driver software flag namespace.
Prefix "bnx2->flags" names with BNX2_* for consistency.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:10:16 -08:00
Michael Chan b2fadeae13 [BNX2]: Add link-down workaround on 5706 serdes.
In some blade systems using the 5706 serdes, the hardware sometimes
does not properly generate link down interrupts.  We add a workaround
in the driver's timer to force a link-down when some PHY registers
report loss of SYNC.

The parallel detect logic is cleaned up slightly to better integrate
the workaround.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:10:15 -08:00