Commit Graph

11960 Commits

Author SHA1 Message Date
Linus Torvalds 48bddb143b Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Fix hotplug deadlock in hv_netvsc, from Stephen Hemminger.

 2) Fix double-free in rmnet driver, from Dan Carpenter.

 3) INET connection socket layer can double put request sockets, fix
    from Eric Dumazet.

 4) Don't match collect metadata-mode tunnels if the device is down,
    from Haishuang Yan.

 5) Do not perform TSO6/GSO on ipv6 packets with extensions headers in
    be2net driver, from Suresh Reddy.

 6) Fix scaling error in gen_estimator, from Eric Dumazet.

 7) Fix 64-bit statistics deadlock in systemport driver, from Florian
    Fainelli.

 8) Fix use-after-free in sctp_sock_dump, from Xin Long.

 9) Reject invalid BPF_END instructions in verifier, from Edward Cree.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
  mlxsw: spectrum_router: Only handle IPv4 and IPv6 events
  Documentation: link in networking docs
  tcp: fix data delivery rate
  bpf/verifier: reject BPF_ALU64|BPF_END
  sctp: do not mark sk dumped when inet_sctp_diag_fill returns err
  sctp: fix an use-after-free issue in sctp_sock_dump
  netvsc: increase default receive buffer size
  tcp: update skb->skb_mstamp more carefully
  net: ipv4: fix l3slave check for index returned in IP_PKTINFO
  net: smsc911x: Quieten netif during suspend
  net: systemport: Fix 64-bit stats deadlock
  net: vrf: avoid gcc-4.6 warning
  qed: remove unnecessary call to memset
  tg3: clean up redundant initialization of tnapi
  tls: make tls_sw_free_resources static
  sctp: potential read out of bounds in sctp_ulpevent_type_enabled()
  MAINTAINERS: review Renesas DT bindings as well
  net_sched: gen_estimator: fix scaling error in bytes/packets samples
  nfp: wait for the NSP resource to appear on boot
  nfp: wait for board state before talking to the NSP
  ...
2017-09-16 11:28:59 -07:00
Edward Cree e67b8a685c bpf/verifier: reject BPF_ALU64|BPF_END
Neither ___bpf_prog_run nor the JITs accept it.
Also adds a new test case.

Fixes: 17a5267067 ("bpf: verifier (add verifier core)")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15 15:01:32 -07:00
Linus Torvalds a2bc8dea9e Kbuild updates for v4.14
- Use Make-builtin $(abspath ...) helper to get absolute path
 
 - Add W=2 extra warning option to detect unused macros
 
 - Use more KCONFIG_CONFIG instead hard-coded .config
 
 - Fix bugs of tar*-pkg targets
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZupWLAAoJED2LAQed4NsGVEEQAItJ0y1uxDr0cjJNE46N6p6+
 EMCWKWC2H0XR9oFRY1y5utYWIwRauIaESgGg1qMU6Lbg5qZamggpNrYVH207tCz1
 gNkU8wwc2SXpxJy2eG2asxY9L2mL0a5fFFOgxIxoz+hCTgr4Yk1IGnTH9+GPQKtW
 thduXxTvcB4/oNTOgUHNj/7j9ydn7ETTOjsCoaEwBZqtBaaEBj20h6EOhgX+ouMd
 5P9YoCbfk28KHKlnMd8sNHV5SLKb94wCwoM/QIOLl42rwIAc81dUgOmaMGeflXF9
 zBH1exi4ID9SyQyuMZemJNe0bD6YR2qG0Sf1t2eDnhxmcav7Vwk+WV7Pdpr8UWw8
 Lot9yPJQA43kfYj6pfCJFXzWEduNT48zGGBJb30WyGkBkidNNGkujdSeI36swEQD
 fPV9tHPk48OSNPqJWZXehezBqN9U5Sa1M9dk5TNA69mzdZgNp052flxywBQ/SGTO
 +h17SREP9Mm6CQ9ApfHaOlMr40/mpCCDq+p8pfem5ZtnBby9k4uNp2P9hAMTJdw8
 5AOdwB0MdzvMQgF5UO0kklk6HGUZTAGHi91k5k3e+DPydt9+2ntZFZoVwVYaD756
 E55KKrQZqSO758gnN9Wbr8ihgOhNI3ZA320nCjfwQdnUqQ496KAkLpgVALF8pEVi
 /xIBawfQNj9BlDc3Y3jo
 =Tam1
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - Use Make-builtin $(abspath ...) helper to get absolute path

 - Add W=2 extra warning option to detect unused macros

 - Use more KCONFIG_CONFIG instead hard-coded .config

 - Fix bugs of tar*-pkg targets

* tag 'kbuild-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: buildtar: do not print successful message if tar returns error
  kbuild: buildtar: fix tar error when CONFIG_MODULES is disabled
  kbuild: Use KCONFIG_CONFIG in buildtar
  Kbuild: enable -Wunused-macros warning for "make W=2"
  kbuild: use $(abspath ...) instead of $(shell cd ... && /bin/pwd)
2017-09-14 13:46:33 -07:00
Michal Hocko 0ee931c4e3 mm: treewide: remove GFP_TEMPORARY allocation flag
GFP_TEMPORARY was introduced by commit e12ba74d8f ("Group short-lived
and reclaimable kernel allocations") along with __GFP_RECLAIMABLE.  It's
primary motivation was to allow users to tell that an allocation is
short lived and so the allocator can try to place such allocations close
together and prevent long term fragmentation.  As much as this sounds
like a reasonable semantic it becomes much less clear when to use the
highlevel GFP_TEMPORARY allocation flag.  How long is temporary? Can the
context holding that memory sleep? Can it take locks? It seems there is
no good answer for those questions.

The current implementation of GFP_TEMPORARY is basically GFP_KERNEL |
__GFP_RECLAIMABLE which in itself is tricky because basically none of
the existing caller provide a way to reclaim the allocated memory.  So
this is rather misleading and hard to evaluate for any benefits.

I have checked some random users and none of them has added the flag
with a specific justification.  I suspect most of them just copied from
other existing users and others just thought it might be a good idea to
use without any measuring.  This suggests that GFP_TEMPORARY just
motivates for cargo cult usage without any reasoning.

I believe that our gfp flags are quite complex already and especially
those with highlevel semantic should be clearly defined to prevent from
confusion and abuse.  Therefore I propose dropping GFP_TEMPORARY and
replace all existing users to simply use GFP_KERNEL.  Please note that
SLAB users with shrinkers will still get __GFP_RECLAIMABLE heuristic and
so they will be placed properly for memory fragmentation prevention.

I can see reasons we might want some gfp flag to reflect shorterm
allocations but I propose starting from a clear semantic definition and
only then add users with proper justification.

This was been brought up before LSF this year by Matthew [1] and it
turned out that GFP_TEMPORARY really doesn't have a clear semantic.  It
seems to be a heuristic without any measured advantage for most (if not
all) its current users.  The follow up discussion has revealed that
opinions on what might be temporary allocation differ a lot between
developers.  So rather than trying to tweak existing users into a
semantic which they haven't expected I propose to simply remove the flag
and start from scratch if we really need a semantic for short term
allocations.

[1] http://lkml.kernel.org/r/20170118054945.GD18349@bombadil.infradead.org

[akpm@linux-foundation.org: fix typo]
[akpm@linux-foundation.org: coding-style fixes]
[sfr@canb.auug.org.au: drm/i915: fix up]
  Link: http://lkml.kernel.org/r/20170816144703.378d4f4d@canb.auug.org.au
Link: http://lkml.kernel.org/r/20170728091904.14627-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Neil Brown <neilb@suse.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-13 18:53:16 -07:00
Ingo Molnar b130a699c0 perf/urgent fixes:
- Fix TUI progress bar when delta from new total from that of the
   previous update is greater than the progress "step" (screen width
   progress bar block))  (Jiri Olsa)
 
 - Make tools/lib/api make DEBUG=1 build use -D_FORTIFY_SOURCE=2 not
   to cripple debuginfo, just like tools/perf/ does (Jiri Olsa)
 
 - Avoid leaking the 'perf.data' file to workloads started from the
   'perf record' command line by using the O_CLOEXEC open flag (Jiri Olsa)
 
 - Fix building when libunwind's 'unwind.h' file is present in the
   include path, clashing with tools/perf/util/unwind.h (Milian Wolff)
 
 - Check per .perfconfig section entry flag, not just per section (Taeung Song)
 
 - Support running perf binaries with a dash in their name, needed to
   run perf as an AppImage (Milian Wolff)
 
 - Wait for the right child by using waitpid() when running workloads
   from 'perf stat', also to fix using perf as an AppImage (Milian Wolff)
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEELb9bqkb7Te0zijNb1lAW81NSqkAFAlm4HVkACgkQ1lAW81NS
 qkByEhAAsNfQRKGQIeudLdEWx63wyZviU0KQ2zeNurbpEMHsttcHgQciYvqQmyCn
 FZ+zm21vcNBKd0pqFwPL0WPJzYSnudRT23cG2NFSLlFX7RNZhzgp0X1a75kACXCH
 oJKpu/D4YDDS8J+xLjApJUWaVOYW39yAG3Cdzq2IBYHvbvPg/ovrBkxrwKLhJJTE
 ZdQIjt+DbGbEUvgOMAji/BmpgjnV5/goz736KoOIiWso3LpAsEb5kiLBMghnSTyR
 M4Hxl7NHS+3f7J8QpTTVlcL4oxI7RgYSQbjnqdwhff4LRrTfS3txRcit20KCMwF/
 u+n1JBgR7I3ogUoO1jXyi0IaDdi77Vr7EckO5Yd+8shGIiXICwx1pMl88NvxBNHN
 6YB8sL8/Fbw6q7d/o5iHwbrkuLZDWaE7fU3kj31l+W5jSIM1orCwcUG+IPU8e2UQ
 M40vtebGEVWKkYl/UqGNGh9d6zlN8du8HW+uT0l9Hebon6YQFt/qDnP0PRQ5QlFi
 p8AozBXbCUxjenUknuaHN4QtIJhshOhzw2YRKxghWeVHqP/yJ8lrPy646NosKXMj
 qPHezIvrEarERDxn8sMlHic2edOfcbiol6GjZmxeDutvLJzc3i54+tfwVuIUG3TV
 o123i3Xt7vld6xaENxPhCvfEqo/IRRuvqAxAIvLRq+OLwc3H2ec=
 =d3gz
 -----END PGP SIGNATURE-----

Merge tag 'perf-urgent-for-mingo-4.14-20170912' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

- Fix TUI progress bar when delta from new total from that of the
  previous update is greater than the progress "step" (screen width
  progress bar block))  (Jiri Olsa)

- Make tools/lib/api make DEBUG=1 build use -D_FORTIFY_SOURCE=2 not
  to cripple debuginfo, just like tools/perf/ does (Jiri Olsa)

- Avoid leaking the 'perf.data' file to workloads started from the
  'perf record' command line by using the O_CLOEXEC open flag (Jiri Olsa)

- Fix building when libunwind's 'unwind.h' file is present in the
  include path, clashing with tools/perf/util/unwind.h (Milian Wolff)

- Check per .perfconfig section entry flag, not just per section (Taeung Song)

- Support running perf binaries with a dash in their name, needed to
  run perf as an AppImage (Milian Wolff)

- Wait for the right child by using waitpid() when running workloads
  from 'perf stat', also to fix using perf as an AppImage (Milian Wolff)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-13 09:25:10 +02:00
Linus Torvalds e6328a7abe Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf tooling updates from Ingo Molnar:
 "Perf tooling updates and fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf annotate browser: Help for cycling thru hottest instructions with TAB/shift+TAB
  perf stat: Only auto-merge events that are PMU aliases
  perf test: Add test case for PERF_SAMPLE_PHYS_ADDR
  perf script: Support physical address
  perf mem: Support physical address
  perf sort: Add sort option for physical address
  perf tools: Support new sample type for physical address
  perf vendor events powerpc: Remove duplicate events
  perf intel-pt: Fix syntax in documentation of config option
  perf test powerpc: Fix 'Object code reading' test
  perf trace: Support syscall name globbing
  perf syscalltbl: Support glob matching on syscall names
  perf report: Calculate the average cycles of iterations
2017-09-12 11:28:13 -07:00
Milian Wolff dfc9eec771 perf stat: Wait for the correct child
When packaging the perf userland application into an AppImage, the
wait() call in perf stat returned too early. It turned out that some
other child process exited, but not the one perf stat launched:

  $ sudo strace -e fork,execve,clone,wait4 -f ./perf-x86_64.AppImage stat sleep 1
  execve("./perf-git.3a73b7f9-x86_64.AppImage", ["./perf-git.3a73b7f9-x86_64.AppIm"..., "stat", "sleep", "1"], 0x7ffec1bbf050 /* 18 vars */) = 0
  clone(child_stack=NULL, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7f6a6e7efe50) = 3912
  strace: Process 3912 attached
  [pid  3912] clone(child_stack=NULL, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7f6a6e7efe50) = 3914
  strace: Process 3914 attached
  [pid  3912] +++ exited with 0 +++
  [pid  3911] --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=3912, si_uid=0, si_status=0, si_utime=0, si_stime=0} ---
  [pid  3914] clone(strace: Process 3915 attached
  child_stack=0x7f6a6d9fefb0, flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, parent_tidptr=0x7f6a6d9ff9d0, tls=0x7f6a6d9ff700, child_tidptr=0x7f6a6d9ff9d0) = 3915
  [pid  3911] execve("/tmp/.mount_perf-g6VYMpl/AppRun", ["./perf-git.3a73b7f9-x86_64.AppIm"..., "stat", "sleep", "1"], 0x14aab70 /* 21 vars */) = 0
  [pid  3911] clone(child_stack=NULL, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7f4ae113c4d0) = 3916
  strace: Process 3916 attached
  [pid  3911] wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 3912
  [pid  3916] execve("/usr/libexec/perf-core/sleep", ["sleep", "1"], 0x27d3650 /* 22 vars */) = -1 ENOENT (No such file or directory)
  [pid  3916] execve("/tmp/./sleep", ["sleep", "1"], 0x27d3650 /* 22 vars */) = -1 ENOENT (No such file or directory)
  [pid  3916] execve("/home/milian/.bin/sleep", ["sleep", "1"], 0x27d3650 /* 22 vars */) = -1 ENOENT (No such file or directory)
  [pid  3916] execve("/usr/lib/icecream/libexec/icecc/bin/sleep", ["sleep", "1"], 0x27d3650 /* 22 vars */) = -1 ENOENT (No such file or directory)
  [pid  3916] execve("/ssd2/milian/projects/compiled/other/bin/sleep", ["sleep", "1"], 0x27d3650 /* 22 vars */) = -1 ENOENT (No such file or directory)
  [pid  3916] execve("/home/milian/.bin/kf5/sleep", ["sleep", "1"], 0x27d3650 /* 22 vars */) = -1 ENOENT (No such file or directory)
  [pid  3916] execve("/ssd2/milian/projects/compiled/kf5/bin/sleep", ["sleep", "1"], 0x27d3650 /* 22 vars */) = -1 ENOENT (No such file or directory)
  [pid  3916] execve("/home/milian/projects/compiled/other/bin/sleep", ["sleep", "1"], 0x27d3650 /* 22 vars */) = -1 ENOENT (No such file or directory)
  [pid  3916] execve("/home/milian/projects/compiled/kf5/bin/sleep", ["sleep", "1"], 0x27d3650 /* 22 vars */) = -1 ENOENT (No such file or directory)
  [pid  3916] execve("/usr/local/sbin/sleep", ["sleep", "1"], 0x27d3650 /* 22 vars */) = -1 ENOENT (No such file or directory)
  [pid  3916] execve("/usr/local/bin/sleep", ["sleep", "1"], 0x27d3650 /* 22 vars */) = -1 ENOENT (No such file or directory)
  [pid  3916] execve("/usr/bin/sleep", ["sleep", "1"], 0x27d3650 /* 22 vars */
   Performance counter stats for 'sleep 1':

       <not counted>	task-clock
       <not counted>	context-switches
       <not counted>	cpu-migrations
       <not counted>	page-faults
       <not counted>	cycles
       <not counted>	instructions
       <not counted>      branches
       <not counted>      branch-misses

         0.000047194 seconds time elapsed

  [pid  3916] --- SIGTERM {si_signo=SIGTERM, si_code=SI_USER, si_pid=3911, si_uid=0} ---
  [pid  3916] +++ killed by SIGTERM +++
  [pid  3911] --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_KILLED, si_pid=3916, si_uid=0, si_status=SIGTERM, si_utime=0, si_stime=0} ---
  [pid  3915] --- SIGPIPE {si_signo=SIGPIPE, si_code=SI_USER, si_pid=3914, si_uid=0} ---
  [pid  3911] +++ exited with 0 +++
  [pid  3915] --- SIGHUP {si_signo=SIGHUP, si_code=SI_USER, si_pid=3914, si_uid=0} ---
  [pid  3915] +++ exited with 0 +++
  +++ exited with 0 +++

This patch uses waitpid instead to ensure the call waits for the
debuggee application launched by 'perf stat'. This fixes 'perf stat'
when launched from an AppImage:

  $ ./perf-x86_64.AppImage stat sleep 1

   Performance counter stats for 'sleep 1':

          0.357235      task-clock (msec)         #    0.000 CPUs utilized
                 1      context-switches          #    0.003 M/sec
                 0      cpu-migrations            #    0.000 K/sec
                50      page-faults               #    0.140 M/sec
           1269602      cycles                    #    3.554 GHz
            654278      instructions              #    0.52  insn per cycle
            129963      branches                  #  363.803 M/sec
              7082      branch-misses             #    5.45% of all branches

       1.000633420 seconds time elapsed

Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170912152523.4497-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-09-12 12:49:13 -03:00
Milian Wolff 3192f1ed3d perf tools: Support running perf binaries with a dash in their name
Previously the part behind "perf-" was interpreted as an internal perf
command. If the suffix could not be handled, the execution was stopped.
This makes it impossible to launch perf binaries that got renamed to
have the `perf-` prefix. This is e.g. the case for appimages (e.g.
"perf-x86_64.AppImage"), but would also apply to all other scenarios
where users symlink or rename perf themselves:

Status quo with the broken behavior:

  $ ln -s ./perf ./perf-custom-suffix
  $ ./perf-custom-suffix list
  cannot handle custom-suffix internally$

Also note the missing newline at the end of the error message.

With this patch applied, the above works properly:

  $ ./perf-custom-suffix list

  List of pre-defined events (to be used in -e):
  ...

Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Acked-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20170911111422.31903-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-09-12 12:48:54 -03:00
Taeung Song cba225d6ee perf config: Check not only section->from_system_config but also item's
Currently section->from_system_config is being checked multiple times.
item->from_system_config should be checked instead, when iterating thru
the items in a section. Fix it.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1504754325-9724-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-09-12 12:35:11 -03:00
Jiri Olsa a82bfd041d perf ui progress: Fix progress update
We currently update the 'next' variable only with a single step value.
But it's possible the 'adv' update is bigger than single 'step' value.
This would leave 'next' value under counted and force unnecessary
ui_progress__ops->update calls.

Calculate the amount of steps we need for 'adv' update and increase the
'next' with that amounts of steps.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170908120510.22515-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-09-12 12:34:54 -03:00
Jiri Olsa 4d286c89e4 perf ui progress: Make sure we always define step value
Unlikely, but we could have ui_progress__init being called with total <
16, which would set the next and step variables to 0. That would force
unnecessary ui_progress__ops->update calls because 'next' would never
raise.

Forcing the next and step values to be always > 0.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170908120510.22515-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-09-12 12:34:46 -03:00
Jiri Olsa cd6379ebb5 perf tools: Open perf.data with O_CLOEXEC flag
Do not carry the perf.data file descriptor into the workload process and
close it when perf executes the workload.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170908084621.31595-2-jolsa@kernel.org
[ Add definitions for O_CLOEXEC for older systems ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-09-12 12:34:23 -03:00
Jiri Olsa 58b79186c3 tools lib api: Fix make DEBUG=1 build
Do not use -D_FORTIFY_SOURCE=2 for DEBUG build as it seems to mess up
with debuginfo, which results in bad gdb experience.

We already do that for tools/perf/.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170908084621.31595-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-09-12 12:34:14 -03:00
Milian Wolff df90cc41d6 perf tests: Fix compile when libunwind's unwind.h is available
When cross compiling perf and I want to link against a self-compiled
libunwind, I usually make the custom path where the libunwind headers
exist visible by adding the libunwind prefix to the include path when
compiling perf, i.e.:

~~~~~
$ ls $HOME/projects/compiled/other/include/
libunwind-coredump.h  libunwind.h         libunwind-x86_64.h
libunwind-common.h  libunwind-dynamic.h   libunwind-ptrace.h
unwind.h
$ make EXTRA_CFLAGS="-I$HOME/projects/compiled/other/include/
~~~~~~

Note the `unwind.h` header from libunwind which leads to compile
errors when compiling tests/dwarf-unwind.c, since it shadows perf's
util/unwind.h:

~~~~~
tests/dwarf-unwind.c:41:32: error: ‘struct unwind_entry’ declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
 static int unwind_entry(struct unwind_entry *entry, void *arg)
                                ^~~~~~~~~~~~
tests/dwarf-unwind.c: In function ‘unwind_entry’:
tests/dwarf-unwind.c:44:22: error: dereferencing pointer to incomplete type ‘struct unwind_entry’
  char *symbol = entry->sym ? entry->sym->name : NULL;
                      ^~
tests/dwarf-unwind.c: In function ‘unwind_thread’:
tests/dwarf-unwind.c:92:8: error: implicit declaration of function ‘unwind__get_entries’; did you mean ‘unwind_entry’? [-Werror=implicit-function-declaration]
  err = unwind__get_entries(unwind_entry, &cnt, thread,
        ^~~~~~~~~~~~~~~~~~~
        unwind_entry
tests/dwarf-unwind.c:92:8: error: nested extern declaration of ‘unwind__get_entries’ [-Werror=nested-externs]
~~~~~~

Fix this compile error by specificing an explicit include of perf's
unwind.h in the util folder.

Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20170906150209.12579-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-09-12 12:34:02 -03:00
Arnaldo Carvalho de Melo 259d40775e tools include linux: Guard against redefinition of some macros
When cross building to android r15c (and older versions) on Fedora 26
we notice these:

/opt/android-ndk-r15c/platforms/android-24/arch-arm/usr/include/sys/cdefs.h:332:0: note: this is the location of the previous definition

For __aligned, __packed and __noreturn, so guard those with ifdefs to
avoid drowning useful warnings in these.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-d7w3fa9c22dtmrwbedos6ie1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-09-12 12:33:39 -03:00
Linus Torvalds dd198ce714 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull namespace updates from Eric Biederman:
 "Life has been busy and I have not gotten half as much done this round
  as I would have liked. I delayed it so that a minor conflict
  resolution with the mips tree could spend a little time in linux-next
  before I sent this pull request.

  This includes two long delayed user namespace changes from Kirill
  Tkhai. It also includes a very useful change from Serge Hallyn that
  allows the security capability attribute to be used inside of user
  namespaces. The practical effect of this is people can now untar
  tarballs and install rpms in user namespaces. It had been suggested to
  generalize this and encode some of the namespace information
  information in the xattr name. Upon close inspection that makes the
  things that should be hard easy and the things that should be easy
  more expensive.

  Then there is my bugfix/cleanup for signal injection that removes the
  magic encoding of the siginfo union member from the kernel internal
  si_code. The mips folks reported the case where I had used FPE_FIXME
  me is impossible so I have remove FPE_FIXME from mips, while at the
  same time including a return statement in that case to keep gcc from
  complaining about unitialized variables.

  I almost finished the work to get make copy_siginfo_to_user a trivial
  copy to user. The code is available at:

     git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace.git neuter-copy_siginfo_to_user-v3

  But I did not have time/energy to get the code posted and reviewed
  before the merge window opened.

  I was able to see that the security excuse for just copying fields
  that we know are initialized doesn't work in practice there are buggy
  initializations that don't initialize the proper fields in siginfo. So
  we still sometimes copy unitialized data to userspace"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  Introduce v3 namespaced file capabilities
  mips/signal: In force_fcr31_sig return in the impossible case
  signal: Remove kernel interal si_code magic
  fcntl: Don't use ambiguous SIG_POLL si_codes
  prctl: Allow local CAP_SYS_ADMIN changing exe_file
  security: Use user_namespace::level to avoid redundant iterations in cap_capable()
  userns,pidns: Verify the userns for new pid namespaces
  signal/testing: Don't look for __SI_FAULT in userspace
  signal/mips: Document a conflict with SI_USER with SIGFPE
  signal/sparc: Document a conflict with SI_USER with SIGFPE
  signal/ia64: Document a conflict with SI_USER with SIGFPE
  signal/alpha: Document a conflict with SI_USER for SIGTRAP
2017-09-11 18:34:47 -07:00
Linus Torvalds 89fd915c40 libnvdimm for 4.14
* Media error handling support in the Block Translation Table (BTT)
   driver is reworked to address sleeping-while-atomic locking and
   memory-allocation-context conflicts.
 
 * The dax_device lookup overhead for xfs and ext4 is moved out of the
   iomap hot-path to a mount-time lookup.
 
 * A new 'ecc_unit_size' sysfs attribute is added to advertise the
   read-modify-write boundary property of a persistent memory range.
 
 * Preparatory fix-ups for arm and powerpc pmem support are included
   along with other miscellaneous fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZtsAGAAoJEB7SkWpmfYgCrzMP/2vPvZvrFjZn5pAoZjlmTmHM
 ySceoOC7vwvVXIsSs52FhSjcxEoXo9cklXPwhXOPVtVUFdSDJBUOIUxwIziE6Y+5
 sFJ2xT9K+5zKBUiXJwqFQDg52dn//eBNnnnDz+HQrBSzGrbWQhIZY2m19omPzv1I
 BeN0OCGOdW3cjSo3BCFl1d+KrSl704e7paeKq/TO3GIiAilIXleTVxcefEEodV2K
 ZvWHpFIhHeyN8dsF8teI952KcCT92CT/IaabxQIwCxX0/8/GFeDc5aqf77qiYWKi
 uxCeQXdgnaE8EZNWZWGWIWul6eYEkoCNbLeUQ7eJnECq61VxVajJS0NyGa5T9OiM
 P046Bo2b1b3R0IHxVIyVG0ZCm3YUMAHSn/3uRxPgESJ4bS/VQ3YP5M6MLxDOlc90
 IisLilagitkK6h8/fVuVrwciRNQ71XEC34t6k7GCl/1ZnLlLT+i4/jc5NRZnGEZh
 aXAAGHdteQ+/mSz6p2UISFUekbd6LerwzKRw8ibDvH6pTud8orYR7g2+JoGhgb6Y
 pyFVE8DhIcqNKAMxBsjiRZ46OQ7qrT+AemdAG3aVv6FaNoe4o5jPLdw2cEtLqtpk
 +DNm0/lSWxxxozjrvu6EUZj6hk8R5E19XpRzV5QJkcKUXMu7oSrFLdMcC4FeIjl9
 K4hXLV3fVBVRMiS0RA6z
 =5iGY
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm from Dan Williams:
 "A rework of media error handling in the BTT driver and other updates.
  It has appeared in a few -next releases and collected some late-
  breaking build-error and warning fixups as a result.

  Summary:

   - Media error handling support in the Block Translation Table (BTT)
     driver is reworked to address sleeping-while-atomic locking and
     memory-allocation-context conflicts.

   - The dax_device lookup overhead for xfs and ext4 is moved out of the
     iomap hot-path to a mount-time lookup.

   - A new 'ecc_unit_size' sysfs attribute is added to advertise the
     read-modify-write boundary property of a persistent memory range.

   - Preparatory fix-ups for arm and powerpc pmem support are included
     along with other miscellaneous fixes"

* tag 'libnvdimm-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (26 commits)
  libnvdimm, btt: fix format string warnings
  libnvdimm, btt: clean up warning and error messages
  ext4: fix null pointer dereference on sbi
  libnvdimm, nfit: move the check on nd_reserved2 to the endpoint
  dax: fix FS_DAX=n BLOCK=y compilation
  libnvdimm: fix integer overflow static analysis warning
  libnvdimm, nd_blk: remove mmio_flush_range()
  libnvdimm, btt: rework error clearing
  libnvdimm: fix potential deadlock while clearing errors
  libnvdimm, btt: cache sector_size in arena_info
  libnvdimm, btt: ensure that flags were also unchanged during a map_read
  libnvdimm, btt: refactor map entry operations with macros
  libnvdimm, btt: fix a missed NVDIMM_IO_ATOMIC case in the write path
  libnvdimm, nfit: export an 'ecc_unit_size' sysfs attribute
  ext4: perform dax_device lookup at mount
  ext2: perform dax_device lookup at mount
  xfs: perform dax_device lookup at mount
  dax: introduce a fs_dax_get_by_bdev() helper
  libnvdimm, btt: check memory allocation failure
  libnvdimm, label: fix index block size calculation
  ...
2017-09-11 13:10:57 -07:00
Linus Torvalds fbd01410e8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
 "The iwlwifi firmware compat fix is in here as well as some other
  stuff:

  1) Fix request socket leak introduced by BPF deadlock fix, from Eric
     Dumazet.

  2) Fix VLAN handling with TXQs in mac80211, from Johannes Berg.

  3) Missing __qdisc_drop conversions in prio and qfq schedulers, from
     Gao Feng.

  4) Use after free in netlink nlk groups handling, from Xin Long.

  5) Handle MTU update properly in ipv6 gre tunnels, from Xin Long.

  6) Fix leak of ipv6 fib tables on netns teardown, from Sabrina Dubroca
     with follow-on fix from Eric Dumazet.

  7) Need RCU and preemption disabled during generic XDP data patch,
     from John Fastabend"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (54 commits)
  bpf: make error reporting in bpf_warn_invalid_xdp_action more clear
  Revert "mdio_bus: Remove unneeded gpiod NULL check"
  bpf: devmap, use cond_resched instead of cpu_relax
  bpf: add support for sockmap detach programs
  net: rcu lock and preempt disable missing around generic xdp
  bpf: don't select potentially stale ri->map from buggy xdp progs
  net: tulip: Constify tulip_tbl
  net: ethernet: ti: netcp_core: no need in netif_napi_del
  davicom: Display proper debug level up to 6
  net: phy: sfp: rename dt properties to match the binding
  dt-binding: net: sfp binding documentation
  dt-bindings: add SFF vendor prefix
  dt-bindings: net: don't confuse with generic PHY property
  ip6_tunnel: fix setting hop_limit value for ipv6 tunnel
  ip_tunnel: fix setting ttl and tos value in collect_md mode
  ipv6: fix typo in fib6_net_exit()
  tcp: fix a request socket leak
  sctp: fix missing wake ups in some situations
  netfilter: xt_hashlimit: fix build error caused by 64bit division
  netfilter: xt_hashlimit: alloc hashtable with right size
  ...
2017-09-09 11:05:20 -07:00
Linus Torvalds fbf4432ff7 Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:

 - most of the rest of MM

 - a small number of misc things

 - lib/ updates

 - checkpatch

 - autofs updates

 - ipc/ updates

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (126 commits)
  ipc: optimize semget/shmget/msgget for lots of keys
  ipc/sem: play nicer with large nsops allocations
  ipc/sem: drop sem_checkid helper
  ipc: convert kern_ipc_perm.refcount from atomic_t to refcount_t
  ipc: convert sem_undo_list.refcnt from atomic_t to refcount_t
  ipc: convert ipc_namespace.count from atomic_t to refcount_t
  kcov: support compat processes
  sh: defconfig: cleanup from old Kconfig options
  mn10300: defconfig: cleanup from old Kconfig options
  m32r: defconfig: cleanup from old Kconfig options
  drivers/pps: use surrounding "if PPS" to remove numerous dependency checks
  drivers/pps: aesthetic tweaks to PPS-related content
  cpumask: make cpumask_next() out-of-line
  kmod: move #ifdef CONFIG_MODULES wrapper to Makefile
  kmod: split off umh headers into its own file
  MAINTAINERS: clarify kmod is just a kernel module loader
  kmod: split out umh code into its own file
  test_kmod: flip INT checks to be consistent
  test_kmod: remove paranoid UINT_MAX check on uint range processing
  vfat: deduplicate hex2bin()
  ...
2017-09-09 10:30:07 -07:00
John Fastabend 5a67da2a71 bpf: add support for sockmap detach programs
The bpf map sockmap supports adding programs via attach commands. This
patch adds the detach command to keep the API symmetric and allow
users to remove previously added programs. Otherwise the user would
have to delete the map and re-add it to get in this state.

This also adds a series of additional tests to capture detach operation
and also attaching/detaching invalid prog types.

API note: socks will run (or not run) programs depending on the state
of the map at the time the sock is added. We do not for example walk
the map and remove programs from previously attached socks.

Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-08 21:11:00 -07:00
Cyrill Gorcunov 66559a691a tools/testing/selftests/kcmp/kcmp_test.c: add KCMP_EPOLL_TFD testing
KCMP's KCMP_EPOLL_TFD mode merged in commit 0791e3644e ("kcmp: add
KCMP_EPOLL_TFD mode to compare epoll target files") we've had no selftest
for it yet (except in criu development list).  Thus add it.

Link: http://lkml.kernel.org/r/20170901151620.GK1898@uranus.lan
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 18:26:47 -07:00
Linus Torvalds 0d519f2d1e pci-v4.14-changes
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZsr8cAAoJEFmIoMA60/r8lXYQAKViYIRMJDD4n3NhjMeLOsnJ
 vwaBmWlLRjSFIEpag5kMjS1RJE17qAvmkBZnDvSNZ6cT28INkkZnVM2IW96WECVq
 64MIvDijVPcvqGuWePCfWdDiSXApiDWwJuw55BOhmvV996wGy0gYgzpPY+1g0Knh
 XzH9IOzDL79hZleLfsxX0MLV6FGBVtOsr0jvQ04k4IgEMIxEDTlbw85rnrvzQUtc
 0Vj2koaxWIESZsq7G/wiZb2n6ekaFdXO/VlVvvhmTSDLCBaJ63Hb/gfOhwMuVkS6
 B3cVprNrCT0dSzWmU4ZXf+wpOyDpBexlemW/OR/6CQUkC6AUS6kQ5si1X44dbGmJ
 nBPh414tdlm/6V4h/A3UFPOajSGa/ZWZ/uQZPfvKs1R6WfjUerWVBfUpAzPbgjam
 c/mhJ19HYT1J7vFBfhekBMeY2Px3JgSJ9rNsrFl48ynAALaX5GEwdpo4aqBfscKz
 4/f9fU4ysumopvCEuKD2SsJvsPKd5gMQGGtvAhXM1TxvAoQ5V4cc99qEetAPXXPf
 h2EqWm4ph7YP4a+n/OZBjzluHCmZJn1CntH5+//6wpUk6HnmzsftGELuO9n12cLE
 GGkreI3T9ctV1eOkzVVa0l0QTE1X/VLyEyKCtb9obXsDaG4Ud7uKQoZgB19DwyTJ
 EG76ridTolUFVV+wzJD9
 =9cLP
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

 - add enhanced Downstream Port Containment support, which prints more
   details about Root Port Programmed I/O errors (Dongdong Liu)

 - add Layerscape ls1088a and ls2088a support (Hou Zhiqiang)

 - add MediaTek MT2712 and MT7622 support (Ryder Lee)

 - add MediaTek MT2712 and MT7622 MSI support (Honghui Zhang)

 - add Qualcom IPQ8074 support (Varadarajan Narayanan)

 - add R-Car r8a7743/5 device tree support (Biju Das)

 - add Rockchip per-lane PHY support for better power management (Shawn
   Lin)

 - fix IRQ mapping for hot-added devices by replacing the
   pci_fixup_irqs() boot-time design with a host bridge hook called at
   probe-time (Lorenzo Pieralisi, Matthew Minter)

 - fix race when enabling two devices that results in upstream bridge
   not being enabled correctly (Srinath Mannam)

 - fix pciehp power fault infinite loop (Keith Busch)

 - fix SHPC bridge MSI hotplug events by enabling bus mastering
   (Aleksandr Bezzubikov)

 - fix a VFIO issue by correcting PCIe capability sizes (Alex
   Williamson)

 - fix an INTD issue on Xilinx and possibly other drivers by unifying
   INTx IRQ domain support (Paul Burton)

 - avoid IOMMU stalls by marking AMD Stoney GPU ATS as broken (Joerg
   Roedel)

 - allow APM X-Gene device assignment to guests by adding an ACS quirk
   (Feng Kan)

 - fix driver crashes by disabling Extended Tags on Broadcom HT2100
   (Extended Tags support is required for PCIe Receivers but not
   Requesters, and we now enable them by default when Requesters support
   them) (Sinan Kaya)

 - fix MSIs for devices that use phantom RIDs for DMA by assuming MSIs
   use the real Requester ID (not a phantom RID) (Robin Murphy)

 - prevent assignment of Intel VMD children to guests (which may be
   supported eventually, but isn't yet) by not associating an IOMMU with
   them (Jon Derrick)

 - fix Intel VMD suspend/resume by releasing IRQs on suspend (Scott
   Bauer)

 - fix a Function-Level Reset issue with Intel 750 NVMe by waiting
   longer (up to 60sec instead of 1sec) for device to become ready
   (Sinan Kaya)

 - fix a Function-Level Reset issue on iProc Stingray by working around
   hardware defects in the CRS implementation (Oza Pawandeep)

 - fix an issue with Intel NVMe P3700 after an iProc reset by adding a
   delay during shutdown (Oza Pawandeep)

 - fix a Microsoft Hyper-V lockdep issue by polling instead of blocking
   in compose_msi_msg() (Stephen Hemminger)

 - fix a wireless LAN driver timeout by clearing DesignWare MSI
   interrupt status after it is handled, not before (Faiz Abbas)

 - fix DesignWare ATU enable checking (Jisheng Zhang)

 - reduce Layerscape dependencies on the bootloader by doing more
   initialization in the driver (Hou Zhiqiang)

 - improve Intel VMD performance allowing allocation of more IRQ vectors
   than present CPUs (Keith Busch)

 - improve endpoint framework support for initial DMA mask, different
   BAR sizes, configurable page sizes, MSI, test driver, etc (Kishon
   Vijay Abraham I, Stan Drozd)

 - rework CRS support to add periodic messages while we poll during
   enumeration and after Function-Level Reset and prepare for possible
   other uses of CRS (Sinan Kaya)

 - clean up Root Port AER handling by removing unnecessary code and
   moving error handler methods to struct pcie_port_service_driver
   (Christoph Hellwig)

 - clean up error handling paths in various drivers (Bjorn Andersson,
   Fabio Estevam, Gustavo A. R. Silva, Harunobu Kurokawa, Jeffy Chen,
   Lorenzo Pieralisi, Sergei Shtylyov)

 - clean up SR-IOV resource handling by disabling VF decoding before
   updating the corresponding resource structs (Gavin Shan)

 - clean up DesignWare-based drivers by unifying quirks to update Class
   Code and Interrupt Pin and related handling of write-protected
   registers (Hou Zhiqiang)

 - clean up by adding empty generic pcibios_align_resource() and
   pcibios_fixup_bus() and removing empty arch-specific implementations
   (Palmer Dabbelt)

 - request exclusive reset control for several drivers to allow cleanup
   elsewhere (Philipp Zabel)

 - constify various structures (Arvind Yadav, Bhumika Goyal)

 - convert from full_name() to %pOF (Rob Herring)

 - remove unused variables from iProc, HiSi, Altera, Keystone (Shawn
   Lin)

* tag 'pci-v4.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (170 commits)
  PCI: xgene: Clean up whitespace
  PCI: xgene: Define XGENE_PCI_EXP_CAP and use generic PCI_EXP_RTCTL offset
  PCI: xgene: Fix platform_get_irq() error handling
  PCI: xilinx-nwl: Fix platform_get_irq() error handling
  PCI: rockchip: Fix platform_get_irq() error handling
  PCI: altera: Fix platform_get_irq() error handling
  PCI: spear13xx: Fix platform_get_irq() error handling
  PCI: artpec6: Fix platform_get_irq() error handling
  PCI: armada8k: Fix platform_get_irq() error handling
  PCI: dra7xx: Fix platform_get_irq() error handling
  PCI: exynos: Fix platform_get_irq() error handling
  PCI: iproc: Clean up whitespace
  PCI: iproc: Rename PCI_EXP_CAP to IPROC_PCI_EXP_CAP
  PCI: iproc: Add 500ms delay during device shutdown
  PCI: Fix typos and whitespace errors
  PCI: Remove unused "res" variable from pci_resource_io()
  PCI: Correct kernel-doc of pci_vpd_srdt_size(), pci_vpd_srdt_tag()
  PCI/AER: Reformat AER register definitions
  iommu/vt-d: Prevent VMD child devices from being remapping targets
  x86/PCI: Use is_vmd() rather than relying on the domain number
  ...
2017-09-08 15:47:43 -07:00
Linus Torvalds 6d6218976d linux-kselftest-4.14-rc1-update
This update consists of:
 
 -- TAP13 framework API and converting tests to TAP13 continues. A few
    more tests are converted and kselftest common RUN_TESTS in lib.mk
    is enhanced to print TAP13 to cover test shell scripts that won't
    be able to use kselftest API.
 
 -- Several fixes to existing tests to not fail in unsupported cases.
    This has been an ongoing work based on the feedback from stable
    release kselftest users.
 
 -- A new watchdog test and much needed cleanups to the existing tests
    from Eugeniu Rosca.
 
 -- Changes to kselftest common lib.mk framework to make RUN_TESTS a
    function to be called from individual test make files to run stress
    and destructive sub-tests.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJZssCNAAoJEAsCRMQNDUMcYKIQAI0z63hsXAXuBO5ZPBEEwjzn
 +sLudsF6PLB4DjbRsGO/S8EXiYW+BZf7Ny3qYO838aUsZFia3w5AhRq91tTf0WzW
 e41qj5AA/y2YaJDL/Q3oebyj4JzhhhkfjNLEap0vfwNDzVlr9mEXO3sfspFe7pWz
 hAWGPXS8W4O6ZmIFHUwkYdoJhYp9s6vysyO5ZXh9TEbSUnytlYJ35Y2vaDEfHWyR
 DbBj8FOgZhmud4aVbAQ5kOH/rB+rRCYgptF3VUmlyOOHJA7QbQofChDkA0G2WcSZ
 4zoGSah/Kx9C3+H3o7u/FyoMXCiJYr49z1Mzgpf3193gIdH694DbDT9mqZtBgDbt
 0irjg2BNmv/8SdX0fudSj7hbt9uTjGYshl48jlKYU+/d/0jtepV1NUMF7zoYYdNN
 PhT2lUR799M09+0+O6kJ7ESkiVLriVkkY0ORW9qGuD2FxLRk0XJzrAacrD5DsEgk
 6Hq/mA1v4HsvoeSZz+2AIMrrQcAsCVWXuseWsN88EU+HPMaKVclcZQ10fXI3zHB+
 BtCiYz9xI+E1sI4MLeSqg2nxZhLhM1Jx+RZA6W38fZIxeaUsItt3OxTFMOFDMky+
 Ahqb+CCCxS8ai7hy9XNBIh1BRjXPbZJCILTdjy82S+xNSRU8qbO7qF3+eoRGP1dB
 UWdB0+1ftkyf8CbqqC60
 =RVb5
 -----END PGP SIGNATURE-----

Merge tag 'linux-kselftest-4.14-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest updates from Shuah Khan:

 - TAP13 framework API and converting tests to TAP13 continues. A few
   more tests are converted and kselftest common RUN_TESTS in lib.mk is
   enhanced to print TAP13 to cover test shell scripts that won't be
   able to use kselftest API.

 - Several fixes to existing tests to not fail in unsupported cases.
   This has been an ongoing work based on the feedback from stable
   release kselftest users.

 - A new watchdog test and much needed cleanups to the existing tests
   from Eugeniu Rosca.

 - Changes to kselftest common lib.mk framework to make RUN_TESTS a
   function to be called from individual test make files to run stress
   and destructive sub-tests.

* tag 'linux-kselftest-4.14-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (41 commits)
  selftests: Enhance kselftest_harness.h to print which assert failed
  selftests: lib.mk: change RUN_TESTS to print messages in TAP13 format
  selftests: change lib.mk RUN_TESTS to take test list as an argument
  selftests: lib.mk: suppress "cd" output from run_tests target
  selftests: kselftest framework: change skip exit code to 0
  selftests/timers: make loop consistent with array size
  selftests: timers: remove rtctest_setdate from run_destructive_tests
  selftests: timers: Fix run_destructive_tests target to handle skipped tests
  kselftests: timers: leap-a-day: Change default arguments to help test runs
  selftests: timers: drop support for !KTEST case
  rtc: rtctest: Improve support detection
  selftests/cpu-hotplug: Skip test when there is only one online cpu
  selftests/cpu-hotplug: exit with failure when test occured unexpected behaviors
  selftests: futex: convert test to use ksft TAP13 framework
  selftests: capabilities: convert error output to TAP13 ksft framework
  selftests: memfd: Align STACK_SIZE for ARM AArch64 system
  selftests: warn if failure is due to lack of executable bit
  selftests: kselftest framework: add error counter
  selftests: capabilities: convert the test to use TAP13 ksft framework
  selftests: capabilities: fix to run Non-root +ia, sgidroot => i test
  ...
2017-09-08 15:11:20 -07:00
Linus Torvalds bac65d9d87 powerpc updates for 4.14
Nothing really major this release, despite quite a lot of activity. Just lots of
 things all over the place.
 
 Some things of note include:
 
  - Access via perf to a new type of PMU (IMC) on Power9, which can count both
    core events as well as nest unit events (Memory controller etc).
 
  - Optimisations to the radix MMU TLB flushing, mostly to avoid unnecessary Page
    Walk Cache (PWC) flushes when the structure of the tree is not changing.
 
  - Reworks/cleanups of do_page_fault() to modernise it and bring it closer to
    other architectures where possible.
 
  - Rework of our page table walking so that THP updates only need to send IPIs
    to CPUs where the affected mm has run, rather than all CPUs.
 
  - The size of our vmalloc area is increased to 56T on 64-bit hash MMU systems.
    This avoids problems with the percpu allocator on systems with very sparse
    NUMA layouts.
 
  - STRICT_KERNEL_RWX support on PPC32.
 
  - A new sched domain topology for Power9, to capture the fact that pairs of
    cores may share an L2 cache.
 
  - Power9 support for VAS, which is a new mechanism for accessing coprocessors,
    and initial support for using it with the NX compression accelerator.
 
  - Major work on the instruction emulation support, adding support for many new
    instructions, and reworking it so it can be used to implement the emulation
    needed to fixup alignment faults.
 
  - Support for guests under PowerVM to use the Power9 XIVE interrupt controller.
 
 And probably that many things again that are almost as interesting, but I had to
 keep the list short. Plus the usual fixes and cleanups as always.
 
 Thanks to:
   Alexey Kardashevskiy, Alistair Popple, Andreas Schwab, Aneesh Kumar K.V, Anju
   T Sudhakar, Arvind Yadav, Balbir Singh, Benjamin Herrenschmidt, Bhumika Goyal,
   Breno Leitao, Bryant G. Ly, Christophe Leroy, Cédric Le Goater, Dan Carpenter,
   Dou Liyang, Frederic Barrat, Gautham R. Shenoy, Geliang Tang, Geoff Levand,
   Hannes Reinecke, Haren Myneni, Ivan Mikhaylov, John Allen, Julia Lawall, LABBE
   Corentin, Laurentiu Tudor, Madhavan Srinivasan, Markus Elfring, Masahiro
   Yamada, Matt Brown, Michael Neuling, Murilo Opsfelder Araujo, Nathan Fontenot,
   Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Rashmica
   Gupta, Rob Herring, Rui Teng, Sam Bobroff, Santosh Sivaraj, Scott Wood,
   Shilpasri G Bhat, Sukadev Bhattiprolu, Suraj Jitindar Singh, Tobin C. Harding,
   Victor Aoqui.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZr83SAAoJEFHr6jzI4aWA6pUP/3CEaj2bSxNzWIwidqyYjuoS
 O1moEsP0oYH7eBEWVHalYxvo0QPIIAhbFPaFyrOrgtfDH01Szwu9LcCALGb8orC5
 Hg3IY8mpNG3Q1T8wEtTa56Ik4b5ZFty35S5+X9qLNSFoDUqSvGlSsLzhPNN7f2tl
 XFm2hWqd8wXCwDsuVSFBCF61M3SAm+g6NMVNJ+VL2KIDCwBrOZLhKDPRoxLTAuMa
 jjSdjVIozWyXjUrBFi8HVcoOWLxcT1HsNF0tRs51LwY/+Mlj2jAtFtsx+a06HZa6
 f2p/Kcp/MEispSTk064Ap9cC1seXWI18zwZKpCUFqu0Ec2yTAiGdjOWDyYQldIp+
 ttVPSHQ01YrVKwDFTtM9CiA0EET6fVPhWgAPkPfvH5TvtKwGkNdy0b+nQLuWrYip
 BUmOXmjdIG3nujCzA9sv6/uNNhjhj2y+HWwuV7Qo002VFkhgZFL67u2SSUQLpYPj
 PxdkY8pPVq+O+in94oDV3c36dYFF6+g6A6505Vn6eKUm/TLpszRFGkS3bKKA5vtn
 74FR+guV/5RwYJcdZbfm04DgAocl7AfUDxpwRxibt6KtAK2VZKQuw4ugUTgYEd7W
 mL2+AMmPKuajWXAMTHjCZPbUp9gFNyYyBQTFfGVX/XLiM8erKBnGfoa1/KzUJkhr
 fVZLYIO/gzl34PiTIfgD
 =UJtt
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Nothing really major this release, despite quite a lot of activity.
  Just lots of things all over the place.

  Some things of note include:

   - Access via perf to a new type of PMU (IMC) on Power9, which can
     count both core events as well as nest unit events (Memory
     controller etc).

   - Optimisations to the radix MMU TLB flushing, mostly to avoid
     unnecessary Page Walk Cache (PWC) flushes when the structure of the
     tree is not changing.

   - Reworks/cleanups of do_page_fault() to modernise it and bring it
     closer to other architectures where possible.

   - Rework of our page table walking so that THP updates only need to
     send IPIs to CPUs where the affected mm has run, rather than all
     CPUs.

   - The size of our vmalloc area is increased to 56T on 64-bit hash MMU
     systems. This avoids problems with the percpu allocator on systems
     with very sparse NUMA layouts.

   - STRICT_KERNEL_RWX support on PPC32.

   - A new sched domain topology for Power9, to capture the fact that
     pairs of cores may share an L2 cache.

   - Power9 support for VAS, which is a new mechanism for accessing
     coprocessors, and initial support for using it with the NX
     compression accelerator.

   - Major work on the instruction emulation support, adding support for
     many new instructions, and reworking it so it can be used to
     implement the emulation needed to fixup alignment faults.

   - Support for guests under PowerVM to use the Power9 XIVE interrupt
     controller.

  And probably that many things again that are almost as interesting,
  but I had to keep the list short. Plus the usual fixes and cleanups as
  always.

  Thanks to: Alexey Kardashevskiy, Alistair Popple, Andreas Schwab,
  Aneesh Kumar K.V, Anju T Sudhakar, Arvind Yadav, Balbir Singh,
  Benjamin Herrenschmidt, Bhumika Goyal, Breno Leitao, Bryant G. Ly,
  Christophe Leroy, Cédric Le Goater, Dan Carpenter, Dou Liyang,
  Frederic Barrat, Gautham R. Shenoy, Geliang Tang, Geoff Levand, Hannes
  Reinecke, Haren Myneni, Ivan Mikhaylov, John Allen, Julia Lawall,
  LABBE Corentin, Laurentiu Tudor, Madhavan Srinivasan, Markus Elfring,
  Masahiro Yamada, Matt Brown, Michael Neuling, Murilo Opsfelder Araujo,
  Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran,
  Paul Mackerras, Rashmica Gupta, Rob Herring, Rui Teng, Sam Bobroff,
  Santosh Sivaraj, Scott Wood, Shilpasri G Bhat, Sukadev Bhattiprolu,
  Suraj Jitindar Singh, Tobin C. Harding, Victor Aoqui"

* tag 'powerpc-4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (321 commits)
  powerpc/xive: Fix section __init warning
  powerpc: Fix kernel crash in emulation of vector loads and stores
  powerpc/xive: improve debugging macros
  powerpc/xive: add XIVE Exploitation Mode to CAS
  powerpc/xive: introduce H_INT_ESB hcall
  powerpc/xive: add the HW IRQ number under xive_irq_data
  powerpc/xive: introduce xive_esb_write()
  powerpc/xive: rename xive_poke_esb() in xive_esb_read()
  powerpc/xive: guest exploitation of the XIVE interrupt controller
  powerpc/xive: introduce a common routine xive_queue_page_alloc()
  powerpc/sstep: Avoid used uninitialized error
  axonram: Return directly after a failed kzalloc() in axon_ram_probe()
  axonram: Improve a size determination in axon_ram_probe()
  axonram: Delete an error message for a failed memory allocation in axon_ram_probe()
  powerpc/powernv/npu: Move tlb flush before launching ATSD
  powerpc/macintosh: constify wf_sensor_ops structures
  powerpc/iommu: Use permission-specific DEVICE_ATTR variants
  powerpc/eeh: Delete an error out of memory message at init time
  powerpc/mm: Use seq_putc() in two functions
  macintosh: Convert to using %pOF instead of full_name
  ...
2017-09-07 10:15:40 -07:00
Linus Torvalds d34fc1adf0 Merge branch 'akpm' (patches from Andrew)
Merge updates from Andrew Morton:

 - various misc bits

 - DAX updates

 - OCFS2

 - most of MM

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (119 commits)
  mm,fork: introduce MADV_WIPEONFORK
  x86,mpx: make mpx depend on x86-64 to free up VMA flag
  mm: add /proc/pid/smaps_rollup
  mm: hugetlb: clear target sub-page last when clearing huge page
  mm: oom: let oom_reap_task and exit_mmap run concurrently
  swap: choose swap device according to numa node
  mm: replace TIF_MEMDIE checks by tsk_is_oom_victim
  mm, oom: do not rely on TIF_MEMDIE for memory reserves access
  z3fold: use per-cpu unbuddied lists
  mm, swap: don't use VMA based swap readahead if HDD is used as swap
  mm, swap: add sysfs interface for VMA based swap readahead
  mm, swap: VMA based swap readahead
  mm, swap: fix swap readahead marking
  mm, swap: add swap readahead hit statistics
  mm/vmalloc.c: don't reinvent the wheel but use existing llist API
  mm/vmstat.c: fix wrong comment
  selftests/memfd: add memfd_create hugetlbfs selftest
  mm/shmem: add hugetlbfs support to memfd_create()
  mm, devm_memremap_pages: use multi-order radix for ZONE_DEVICE lookups
  mm/vmalloc.c: halve the number of comparisons performed in pcpu_get_vm_areas()
  ...
2017-09-06 20:49:49 -07:00
Mike Kravetz 1f522a4856 selftests/memfd: add memfd_create hugetlbfs selftest
With the addition of hugetlbfs support in memfd_create, the memfd
selftests should verify correct functionality with hugetlbfs.

Instead of writing a separate memfd hugetlbfs test, modify the
memfd_test program to take an optional argument 'hugetlbfs'.  If the
hugetlbfs argument is specified, basic memfd_create functionality will
be exercised on hugetlbfs.  If hugetlbfs is not specified, the current
functionality of the test is unchanged.

Note that many of the tests in memfd_test test file sealing operations.
hugetlbfs does not support file sealing, therefore for hugetlbfs all
sealing related tests are skipped.

In order to test on hugetlbfs, there needs to be preallocated huge
pages.  A new script (run_tests) is added.  This script will first run
the existing memfd_create tests.  It will then, attempt to allocate the
required number of huge pages before running the hugetlbfs test.  At the
end of testing, it will release any huge pages allocated for testing
purposes.

Link: http://lkml.kernel.org/r/1502495772-24736-3-git-send-email-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 17:27:29 -07:00
Andrea Arcangeli d312cb1e48 userfaultfd: selftest: explicit failure if the SIGBUS test failed
Showing zero in the output isn't very self explanatory as a successful
result.  Show a more explicit error output if the test fails.

Link: http://lkml.kernel.org/r/20170802165145.22628-4-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Alexey Perevalov <a.perevalov@samsung.com>
Cc: Maxime Coquelin <maxime.coquelin@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 17:27:29 -07:00
Andrea Arcangeli 67e803281d userfaultfd: selftest: exercise UFFDIO_COPY/ZEROPAGE -EEXIST
This will retry the UFFDIO_COPY/ZEROPAGE to verify it returns -EEXIST at
the first invocation and then later every 10 seconds.

In the filebacked MAP_SHARED case this also verifies the -EEXIST
triggered in the filesystem pagecache insertion, if the offset in the
file was not a hole.

shmem MAP_SHARED tries to index the newly allocated pagecache in the
radix tree before checking the pagetable so it doesn't need any
assistance to exercise that case.

hugetlbfs checks the pmd to be not none before trying to index the
hugetlbfs page in the radix tree, so it requires to run UFFDIO_COPY into
an alias mapping (the alternative would be to use MADV_DONTNEED to only
zap the pagetables, but that doesn't work on hugetlbfs).

[akpm@linux-foundation.org: fix uffdio_zeropage(), per Mike Kravetz]
Link: http://lkml.kernel.org/r/20170802165145.22628-3-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Alexey Perevalov <a.perevalov@samsung.com>
Cc: Maxime Coquelin <maxime.coquelin@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 17:27:29 -07:00
Prakash Sangappa 81aac3a15e userfaultfd: selftest: add tests for UFFD_FEATURE_SIGBUS feature
Add tests for UFFD_FEATURE_SIGBUS feature.  The tests will verify signal
delivery instead of userfault events.  Also, test use of UFFDIO_COPY to
allocate memory and retry accessing monitored area after signal
delivery.

Also fix a bug in uffd_poll_thread() where 'uffd' is leaked.

Link: http://lkml.kernel.org/r/1501552446-748335-3-git-send-email-prakash.sangappa@oracle.com
Signed-off-by: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 17:27:29 -07:00
Mike Rapoport 824f973904 userfaultfd: selftest: enable testing of UFFDIO_ZEROPAGE for shmem
Link: http://lkml.kernel.org/r/1497939652-16528-8-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 17:27:28 -07:00
Linus Torvalds aae3dbb477 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) Support ipv6 checksum offload in sunvnet driver, from Shannon
    Nelson.

 2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric
    Dumazet.

 3) Allow generic XDP to work on virtual devices, from John Fastabend.

 4) Add bpf device maps and XDP_REDIRECT, which can be used to build
    arbitrary switching frameworks using XDP. From John Fastabend.

 5) Remove UFO offloads from the tree, gave us little other than bugs.

 6) Remove the IPSEC flow cache, from Florian Westphal.

 7) Support ipv6 route offload in mlxsw driver.

 8) Support VF representors in bnxt_en, from Sathya Perla.

 9) Add support for forward error correction modes to ethtool, from
    Vidya Sagar Ravipati.

10) Add time filter for packet scheduler action dumping, from Jamal Hadi
    Salim.

11) Extend the zerocopy sendmsg() used by virtio and tap to regular
    sockets via MSG_ZEROCOPY. From Willem de Bruijn.

12) Significantly rework value tracking in the BPF verifier, from Edward
    Cree.

13) Add new jump instructions to eBPF, from Daniel Borkmann.

14) Rework rtnetlink plumbing so that operations can be run without
    taking the RTNL semaphore. From Florian Westphal.

15) Support XDP in tap driver, from Jason Wang.

16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal.

17) Add Huawei hinic ethernet driver.

18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan
    Delalande.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits)
  i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq
  i40e: avoid NVM acquire deadlock during NVM update
  drivers: net: xgene: Remove return statement from void function
  drivers: net: xgene: Configure tx/rx delay for ACPI
  drivers: net: xgene: Read tx/rx delay for ACPI
  rocker: fix kcalloc parameter order
  rds: Fix non-atomic operation on shared flag variable
  net: sched: don't use GFP_KERNEL under spin lock
  vhost_net: correctly check tx avail during rx busy polling
  net: mdio-mux: add mdio_mux parameter to mdio_mux_init()
  rxrpc: Make service connection lookup always check for retry
  net: stmmac: Delete dead code for MDIO registration
  gianfar: Fix Tx flow control deactivation
  cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6
  cxgb4: Fix pause frame count in t4_get_port_stats
  cxgb4: fix memory leak
  tun: rename generic_xdp to skb_xdp
  tun: reserve extra headroom only when XDP is set
  net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping
  net: dsa: bcm_sf2: Advertise number of egress queues
  ...
2017-09-06 14:45:08 -07:00
Mickaël Salaün 369130b631 selftests: Enhance kselftest_harness.h to print which assert failed
When a test process is not able to write to TH_LOG_STREAM, this step
mechanism enable to print the assert number which triggered the failure.
This can be enabled by setting _metadata->no_print to true at the
beginning of the test sequence.

Update the seccomp-bpf test to return 0 if a test succeeded.

This feature is needed for the Landlock tests.

Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Will Drewry <wad@chromium.org>
Link: https://lkml.kernel.org/r/CAGXu5j+D-FP8Kt9unNOqKrQJP4DYTpmgkJxWykZyrYiVPz3Y3Q@mail.gmail.com
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-09-05 19:21:33 -06:00
Linus Torvalds 53ac64aac9 ACPI updates for v4.14-rc1
- Update the ACPICA code in the kernel to upstream revision 20170728
    including:
    * Alias operator handling update (Bob Moore).
    * Deferred resolution of reference package elements (Bob Moore).
    * Support for the _DMA method in walk resources (Bob Moore).
    * Tables handling update and support for deferred table
      verification (Lv Zheng).
    * Update of SMMU models for IORT (Robin Murphy).
    * Compiler and disassembler updates (Alex James, Erik Schmauss,
      Ganapatrao Kulkarni, James Morse).
    * Tools updates (Erik Schmauss, Lv Zheng).
    * Assorted minor fixes and cleanups (Bob Moore, Kees Cook,
      Lv Zheng, Shao Ming).
 
  - Rework the initialization of non-wakeup GPEs with method handlers
    in order to address a boot crash on some systems with Thunderbolt
    devices connected at boot time where we miss an early hotplug
    event due to a delay in GPE enabling (Rafael Wysocki).
 
  - Rework the handling of PCI bridges when setting up ACPI-based
    device wakeup in order to avoid disabling wakeup for bridges
    prematurely (Rafael Wysocki).
 
  - Consolidate Apple DMI checks throughout the tree, add support for
    Apple device properties to the device properties framework and
    use these properties for the handling of I2C and SPI devices on
    Apple systems (Lukas Wunner).
 
  - Add support for _DMA to the ACPI-based device properties lookup
    code and make it possible to use the information from there to
    configure DMA regions on ARM64 systems (Lorenzo Pieralisi).
 
  - Fix several issues in the APEI code, add support for exporting
    the BERT error region over sysfs and update APEI MAINTAINERS
    entry with reviewers information (Borislav Petkov, Dongjiu Geng,
    Loc Ho, Punit Agrawal, Tony Luck, Yazen Ghannam).
 
  - Fix a potential initialization ordering issue in the ACPI EC
    driver and clean it up somewhat (Lv Zheng).
 
  - Update the ACPI SPCR driver to extend the existing XGENE 8250
    workaround in it to a new platform (m400) and to work around
    an Xgene UART clock issue (Graeme Gregory).
 
  - Add a new utility function to the ACPI core to support using
    ACPI OEM ID / OEM Table ID / Revision for system identification
    in blacklisting or similar and switch over the existing code
    already using this information to this new interface (Toshi Kani).
 
  - Fix an xpower PMIC issue related to GPADC reads that always return
    0 without extra pin manipulations (Hans de Goede).
 
  - Add statements to print debug messages in a couple of places in
    the ACPI core for easier diagnostics (Rafael Wysocki).
 
  - Clean up the ACPI processor driver slightly (Colin Ian King,
    Hanjun Guo).
 
  - Clean up the ACPI x86 boot code somewhat (Andy Shevchenko).
 
  - Add a quirk for Dell OptiPlex 9020M to the ACPI backlight
    driver (Alex Hung).
 
  - Assorted fixes, cleanups and updates related to ACPI (Amitoj Kaur
    Chawla, Bhumika Goyal, Frank Rowand, Jean Delvare, Punit Agrawal,
    Ronald Tschalär, Sumeet Pawnikar).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJZrcE+AAoJEILEb/54YlRxVGAP/RKzkJlYlOIXtMjf4XWg5ZfJ
 RKZA68E9DW179KoBoTCVPD6/eD5UoEJ7fsWXFU2Hgp2xL3N1mZMAJHgAE4GoAwCx
 uImoYvQgdPna7DawzRIFkvkfceYxNyh+KaV9s7xne4hAwsB7JzP9yf5Ywll53+oF
 Le27/r6lDOaWhG7uYcxSabnQsWZQkBF5mj2GPzEpKDIHcLA1Vii0URzm7mAHdZsz
 vGjYhxrshKYEVdkLSRn536m1rEfp2fqsRJ5wqNAazZJr6Cs1WIfNVuv/RfduRJpG
 /zHIRAmgKV+3jp39cBpjdnexLczb1rGiCV1yZOvwCNM7jy4evL8vbL7VgcUCopaj
 fHbF34chNG/hKJd3Zn3RRCTNzCs6bv+txslOMARxji5eyr2Q4KuVnvg5LM4hxOUP
 23FvcYkBYWu4QCNLOTnC7y2OqK6WzOvDpfi7hf13Z42iNzeAUbwt1sVF0/OCwL51
 Og6blSy2x8FidKp8oaBBboBzHEiKWnXBj/Hw8KEHVcsqZv1ZC6igNRAL3tjxamU8
 98/Z2NSZHYPrrrn13tT9ywISYXReXzUF85787+0ofugvDe8/QyBH6UhzzZc/xKVA
 t329JEjEFZZSLgxMIIa9bXoQANxkeZEGsxN6FfwvQhyIVdagLF3UvCjZl/q2NScC
 9n++s32qfUBRHetGODWc
 =6Ke9
 -----END PGP SIGNATURE-----

Merge tag 'acpi-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "These include a usual ACPICA code update (this time to upstream
  revision 20170728), a fix for a boot crash on some systems with
  Thunderbolt devices connected at boot time, a rework of the handling
  of PCI bridges when setting up device wakeup, new support for Apple
  device properties, support for DMA configurations reported via ACPI on
  ARM64, APEI-related updates, ACPI EC driver updates and assorted minor
  modifications in several places.

  Specifics:

   - Update the ACPICA code in the kernel to upstream revision 20170728
     including:
      * Alias operator handling update (Bob Moore).
      * Deferred resolution of reference package elements (Bob Moore).
      * Support for the _DMA method in walk resources (Bob Moore).
      * Tables handling update and support for deferred table
        verification (Lv Zheng).
      * Update of SMMU models for IORT (Robin Murphy).
      * Compiler and disassembler updates (Alex James, Erik Schmauss,
        Ganapatrao Kulkarni, James Morse).
      * Tools updates (Erik Schmauss, Lv Zheng).
      * Assorted minor fixes and cleanups (Bob Moore, Kees Cook, Lv
        Zheng, Shao Ming).

   - Rework the initialization of non-wakeup GPEs with method handlers
     in order to address a boot crash on some systems with Thunderbolt
     devices connected at boot time where we miss an early hotplug event
     due to a delay in GPE enabling (Rafael Wysocki).

   - Rework the handling of PCI bridges when setting up ACPI-based
     device wakeup in order to avoid disabling wakeup for bridges
     prematurely (Rafael Wysocki).

   - Consolidate Apple DMI checks throughout the tree, add support for
     Apple device properties to the device properties framework and use
     these properties for the handling of I2C and SPI devices on Apple
     systems (Lukas Wunner).

   - Add support for _DMA to the ACPI-based device properties lookup
     code and make it possible to use the information from there to
     configure DMA regions on ARM64 systems (Lorenzo Pieralisi).

   - Fix several issues in the APEI code, add support for exporting the
     BERT error region over sysfs and update APEI MAINTAINERS entry with
     reviewers information (Borislav Petkov, Dongjiu Geng, Loc Ho, Punit
     Agrawal, Tony Luck, Yazen Ghannam).

   - Fix a potential initialization ordering issue in the ACPI EC driver
     and clean it up somewhat (Lv Zheng).

   - Update the ACPI SPCR driver to extend the existing XGENE 8250
     workaround in it to a new platform (m400) and to work around an
     Xgene UART clock issue (Graeme Gregory).

   - Add a new utility function to the ACPI core to support using ACPI
     OEM ID / OEM Table ID / Revision for system identification in
     blacklisting or similar and switch over the existing code already
     using this information to this new interface (Toshi Kani).

   - Fix an xpower PMIC issue related to GPADC reads that always return
     0 without extra pin manipulations (Hans de Goede).

   - Add statements to print debug messages in a couple of places in the
     ACPI core for easier diagnostics (Rafael Wysocki).

   - Clean up the ACPI processor driver slightly (Colin Ian King, Hanjun
     Guo).

   - Clean up the ACPI x86 boot code somewhat (Andy Shevchenko).

   - Add a quirk for Dell OptiPlex 9020M to the ACPI backlight driver
     (Alex Hung).

   - Assorted fixes, cleanups and updates related to ACPI (Amitoj Kaur
     Chawla, Bhumika Goyal, Frank Rowand, Jean Delvare, Punit Agrawal,
     Ronald Tschalär, Sumeet Pawnikar)"

* tag 'acpi-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (75 commits)
  ACPI / APEI: Suppress message if HEST not present
  intel_pstate: convert to use acpi_match_platform_list()
  ACPI / blacklist: add acpi_match_platform_list()
  ACPI, APEI, EINJ: Subtract any matching Register Region from Trigger resources
  ACPI: make device_attribute const
  ACPI / sysfs: Extend ACPI sysfs to provide access to boot error region
  ACPI: APEI: fix the wrong iteration of generic error status block
  ACPI / processor: make function acpi_processor_check_duplicates() static
  ACPI / EC: Clean up EC GPE mask flag
  ACPI: EC: Fix possible issues related to EC initialization order
  ACPI / PM: Add debug statements to acpi_pm_notify_handler()
  ACPI: Add debug statements to acpi_global_event_handler()
  ACPI / scan: Enable GPEs before scanning the namespace
  ACPICA: Make it possible to enable runtime GPEs earlier
  ACPICA: Dispatch active GPEs at init time
  ACPI: SPCR: work around clock issue on xgene UART
  ACPI: SPCR: extend XGENE 8250 workaround to m400
  ACPI / LPSS: Don't abort ACPI scan on missing mem resource
  mailbox: pcc: Drop uninformative output during boot
  ACPI/IORT: Add IORT named component memory address limits
  ...
2017-09-05 12:45:03 -07:00
Linus Torvalds 439644096c Power management updates for v4.14-rc1
- Drop the P-state selection algorithm based on a PID controller
    from intel_pstate and make it use the same P-state selection
    method (based on the CPU load) for all types of systems in the
    active mode (Rafael Wysocki, Srinivas Pandruvada).
 
  - Rework the cpufreq core and governors to make it possible to
    take cross-CPU utilization updates into account and modify the
    schedutil governor to actually do so (Viresh Kumar).
 
  - Clean up the handling of transition latency information in the
    cpufreq core and untangle it from the information on which drivers
    cannot do dynamic frequency switching (Viresh Kumar).
 
  - Add support for new SoCs (MT2701/MT7623 and MT7622) to the
    mediatek cpufreq driver and update its DT bindings (Sean Wang).
 
  - Modify the cpufreq dt-platdev driver to autimatically create
    cpufreq devices for the new (v2) Operating Performance Points
    (OPP) DT bindings and update its whitelist of supported systems
    (Viresh Kumar, Shubhrajyoti Datta, Marc Gonzalez, Khiem Nguyen,
    Finley Xiao).
 
  - Add support for Ux500 to the cpufreq-dt driver and drop the
    obsolete dbx500 cpufreq driver (Linus Walleij, Arnd Bergmann).
 
  - Add new SoC (R8A7795) support to the cpufreq rcar driver (Khiem
    Nguyen).
 
  - Fix and clean up assorted issues in the cpufreq drivers and core
    (Arvind Yadav, Christophe Jaillet, Colin Ian King, Gustavo Silva,
    Julia Lawall, Leonard Crestez, Rob Herring, Sudeep Holla).
 
  - Update the IO-wait boost handling in the schedutil governor to
    make it less aggressive (Joel Fernandes).
 
  - Rework system suspend diagnostics to make it print fewer messages
    to the kernel log by default, add a sysfs knob to allow more
    suspend-related messages to be printed and add Low Power S0 Idle
    constraints checks to the ACPI suspend-to-idle code (Rafael
    Wysocki, Srinivas Pandruvada).
 
  - Prefer suspend-to-idle over S3 on ACPI-based systems with the
    ACPI_FADT_LOW_POWER_S0 flag set and the Low Power Idle S0 _DSM
    interface present in the ACPI tables (Rafael Wysocki).
 
  - Update documentation related to system sleep and rename a number
    of items in the code to make it cleare that they are related to
    suspend-to-idle (Rafael Wysocki).
 
  - Export a variable allowing device drivers to check the target
    system sleep state from the core system suspend code (Florian
    Fainelli).
 
  - Clean up the cpuidle subsystem to handle the polling state on
    x86 in a more straightforward way and to use %pOF instead of
    full_name (Rafael Wysocki, Rob Herring).
 
  - Update the devfreq framework to fix and clean up a few minor
    issues (Chanwoo Choi, Rob Herring).
 
  - Extend diagnostics in the generic power domains (genpd) framework
    and clean it up slightly (Thara Gopinath, Rob Herring).
 
  - Fix and clean up a couple of issues in the operating performance
    points (OPP) framework (Viresh Kumar, Waldemar Rymarkiewicz).
 
  - Add support for RV1108 to the rockchip-io Adaptive Voltage Scaling
    (AVS) driver (David Wu).
 
  - Fix the usage of notifiers in CPU power management on some
    platforms (Alex Shi).
 
  - Update the pm-graph system suspend/hibernation and boot profiling
    utility (Todd Brandt).
 
  - Make it possible to run the cpupower utility without CPU0 (Prarit
    Bhargava).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJZrcDJAAoJEILEb/54YlRx9FUQAIUKvWBAARc61ZIZXjbqZF1v
 aEMOBuksFns0CMekdptSic6n4wc81E/XYMS8yDhOOMpyDzfAZsTWjmu+gKwN7w3l
 E/yf/NVlhob9JZ7MqGgqD4EUFfFIaKBXPlWFdDi2rdCUXE2L8xJ7rla8i7zyZlc5
 pYHfAppBbF4qUcEY4OoOVOOGRZCfMdiLXj0iZOhMX8Y6yLBRk/AjnVADYsF33hoj
 gBEfomU+H0K5V8nQEp0ZFKDArPwL+oElHQj6i+nxBpGfPM5evvLXhHOyR6AsldJ5
 J4YI1kMuQNSCmvHMqOTxTYyJf8Jcf3Fj4wcjwaVMVGceY1lz6McAKknnFnCqCvz+
 mskn84gFCBCM8EoJDqRf0b9MQHcuRyQKM+yw4tjnR9r8yd32erb85ZWFHcPWYhCT
 fZatNOwFFv2MU+2vo5J3yeUNSWIKT+uBjy+tKPbrDkUwpKZVRj3Oj+hP3Mq9NE8U
 YBqltsj7tmrdA634zI8C7jfS6wF221S0fId/iPszwmPJaVn/lq8Ror7pWL5YI8U7
 SCJFjiqDiGmAcQEkuWwFAQnscZkyHpO+Y3A+jfXl/izoaZETaI5+ceIHBaocm3+5
 XrOOpHS3ik8EHf9ji0KFCKZ/pYDwllday3cBQPWo3sMIzpQ2lrjbqdnE1cVnBrld
 OtHZAeD/jLUXuY6XW2jN
 =mAiV
 -----END PGP SIGNATURE-----

Merge tag 'pm-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "This time (again) cpufreq gets the majority of changes which mostly
  are driver updates (including a major consolidation of intel_pstate),
  some schedutil governor modifications and core cleanups.

  There also are some changes in the system suspend area, mostly related
  to diagnostics and debug messages plus some renames of things related
  to suspend-to-idle. One major change here is that suspend-to-idle is
  now going to be preferred over S3 on systems where the ACPI tables
  indicate to do so and provide requsite support (the Low Power Idle S0
  _DSM in particular). The system sleep documentation and the tools
  related to it are updated too.

  The rest is a few cpuidle changes (nothing major), devfreq updates,
  generic power domains (genpd) framework updates and a few assorted
  modifications elsewhere.

  Specifics:

   - Drop the P-state selection algorithm based on a PID controller from
     intel_pstate and make it use the same P-state selection method
     (based on the CPU load) for all types of systems in the active mode
     (Rafael Wysocki, Srinivas Pandruvada).

   - Rework the cpufreq core and governors to make it possible to take
     cross-CPU utilization updates into account and modify the schedutil
     governor to actually do so (Viresh Kumar).

   - Clean up the handling of transition latency information in the
     cpufreq core and untangle it from the information on which drivers
     cannot do dynamic frequency switching (Viresh Kumar).

   - Add support for new SoCs (MT2701/MT7623 and MT7622) to the mediatek
     cpufreq driver and update its DT bindings (Sean Wang).

   - Modify the cpufreq dt-platdev driver to autimatically create
     cpufreq devices for the new (v2) Operating Performance Points (OPP)
     DT bindings and update its whitelist of supported systems (Viresh
     Kumar, Shubhrajyoti Datta, Marc Gonzalez, Khiem Nguyen, Finley
     Xiao).

   - Add support for Ux500 to the cpufreq-dt driver and drop the
     obsolete dbx500 cpufreq driver (Linus Walleij, Arnd Bergmann).

   - Add new SoC (R8A7795) support to the cpufreq rcar driver (Khiem
     Nguyen).

   - Fix and clean up assorted issues in the cpufreq drivers and core
     (Arvind Yadav, Christophe Jaillet, Colin Ian King, Gustavo Silva,
     Julia Lawall, Leonard Crestez, Rob Herring, Sudeep Holla).

   - Update the IO-wait boost handling in the schedutil governor to make
     it less aggressive (Joel Fernandes).

   - Rework system suspend diagnostics to make it print fewer messages
     to the kernel log by default, add a sysfs knob to allow more
     suspend-related messages to be printed and add Low Power S0 Idle
     constraints checks to the ACPI suspend-to-idle code (Rafael
     Wysocki, Srinivas Pandruvada).

   - Prefer suspend-to-idle over S3 on ACPI-based systems with the
     ACPI_FADT_LOW_POWER_S0 flag set and the Low Power Idle S0 _DSM
     interface present in the ACPI tables (Rafael Wysocki).

   - Update documentation related to system sleep and rename a number of
     items in the code to make it cleare that they are related to
     suspend-to-idle (Rafael Wysocki).

   - Export a variable allowing device drivers to check the target
     system sleep state from the core system suspend code (Florian
     Fainelli).

   - Clean up the cpuidle subsystem to handle the polling state on x86
     in a more straightforward way and to use %pOF instead of full_name
     (Rafael Wysocki, Rob Herring).

   - Update the devfreq framework to fix and clean up a few minor issues
     (Chanwoo Choi, Rob Herring).

   - Extend diagnostics in the generic power domains (genpd) framework
     and clean it up slightly (Thara Gopinath, Rob Herring).

   - Fix and clean up a couple of issues in the operating performance
     points (OPP) framework (Viresh Kumar, Waldemar Rymarkiewicz).

   - Add support for RV1108 to the rockchip-io Adaptive Voltage Scaling
     (AVS) driver (David Wu).

   - Fix the usage of notifiers in CPU power management on some
     platforms (Alex Shi).

   - Update the pm-graph system suspend/hibernation and boot profiling
     utility (Todd Brandt).

   - Make it possible to run the cpupower utility without CPU0 (Prarit
     Bhargava)"

* tag 'pm-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (87 commits)
  cpuidle: Make drivers initialize polling state
  cpuidle: Move polling state initialization code to separate file
  cpuidle: Eliminate the CPUIDLE_DRIVER_STATE_START symbol
  cpufreq: imx6q: Fix imx6sx low frequency support
  cpufreq: speedstep-lib: make several arrays static, makes code smaller
  PM: docs: Delete the obsolete states.txt document
  PM: docs: Describe high-level PM strategies and sleep states
  PM / devfreq: Fix memory leak when fail to register device
  PM / devfreq: Add dependency on PM_OPP
  PM / devfreq: Move private devfreq_update_stats() into devfreq
  PM / devfreq: Convert to using %pOF instead of full_name
  PM / AVS: rockchip-io: add io selectors and supplies for RV1108
  cpufreq: ti: Fix 'of_node_put' being called twice in error handling path
  cpufreq: dt-platdev: Drop few entries from whitelist
  cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2
  ARM: ux500: don't select CPUFREQ_DT
  cpuidle: Convert to using %pOF instead of full_name
  cpufreq: Convert to using %pOF instead of full_name
  PM / Domains: Convert to using %pOF instead of full_name
  cpufreq: Cap the default transition delay value to 10 ms
  ...
2017-09-05 12:19:08 -07:00
Linus Torvalds b88f55774f spi: Updates for v4.14
A fairly quiet release for the SPI subsystem:
 
  - Move to using IDR for allocating bus numbers.
  - Modernisation of the ep93xx driver, removing a lot of open coding and
    using the framework more.
  - The tools have been moved to use the standard tools build system and
    an install target added (there will be a fairly trivial conflict
    with tip resulting from the changes in the main tools Makefile).
  - A refactoring of the Qualcomm QUP driver which enables new variants
    to be supported.
  - Explicit support for the Freescale i.MX53 and i.MX6 SPI, Renesas
    R-Car H3 and Rockchip RV1108 controllers.
 
 There's also a trivial add/add conflict in spi.c with the ACPI tree
 adding a header for some Apple support and the IDR code needing a header
 too.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCAAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlmtgGYTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0IwAB/9U/s75RgZN+w/IZneex3gD2+mnNxTV
 SiWWlR66580vbXsh7lgzTtANrDKfYTsYGP3JS7vjhsegBlzcT4M5OMyJZTcCi40a
 JF0edDFnkqNM96LubJVnrIJj4KHL1Zx+FICIXItOSBZh6ECgI92KAfAbfQhLdB10
 BtNdlsQMzcTygLqf2/N6W7u/6yYBnUuaaNeu+j4QsF1pE9L/5kt3lLXxv2DTL3cA
 vncqu/ndxIjCKLpIGjMOrvAlLCKmZdIxX3Y/d1XJSxyG3vJj30kEvxATZ15sKln8
 gXOnmWF2JgBcxEHxzsTGuVZpXXblu7uiicniglP0geC9dMboJnky993j
 =tbQ9
 -----END PGP SIGNATURE-----

Merge tag 'spi-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "A fairly quiet release for the SPI subsystem:

   - Move to using IDR for allocating bus numbers

   - Modernisation of the ep93xx driver, removing a lot of open coding
     and using the framework more

   - The tools have been moved to use the standard tools build system
     and an install target added (there will be a fairly trivial
     conflict with tip resulting from the changes in the main tools
     Makefile)

   - A refactoring of the Qualcomm QUP driver which enables new variants
     to be supported

   - Explicit support for the Freescale i.MX53 and i.MX6 SPI, Renesas
     R-Car H3 and Rockchip RV1108 controllers"

* tag 'spi-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (71 commits)
  spi: spi-falcon: drop check of boot select
  spi: imx: fix use of native chip-selects with devicetree
  spi: pl022: constify amba_id
  spi: imx: fix little-endian build
  spi: omap: Allocate bus number from spi framework
  spi: Kernel coding style fixes
  spi: imx: dynamic burst length adjust for PIO mode
  spi: Pick spi bus number from Linux idr or spi alias
  spi: rockchip: configure CTRLR1 according to size and data frame
  spi: altera: Consolidate TX/RX data register access
  spi: altera: Switch to SPI core transfer queue management
  spi: rockchip: add compatible string for rv1108 spi
  spi: qup: fix 64-bit build warning
  spi: qup: hide warning for uninitialized variable
  spi: spi-ep93xx: use the default master transfer queueing mechanism
  spi: spi-ep93xx: remove private data 'current_msg'
  spi: spi-ep93xx: pass the spi_master pointer around
  spi: spi-ep93xx: absorb the interrupt enable/disable helpers
  spi: spi-ep93xx: add spi master prepare_transfer_hardware()
  spi: spi-ep93xx: use 32-bit read/write for all registers
  ...
2017-09-05 11:40:38 -07:00
Linus Torvalds bafb0762cb Char/Misc drivers for 4.14-rc1
Here is the big char/misc driver update for 4.14-rc1.
 
 Lots of different stuff in here, it's been an active development cycle
 for some reason.  Highlights are:
   - updated binder driver, this brings binder up to date with what
     shipped in the Android O release, plus some more changes that
     happened since then that are in the Android development trees.
   - coresight updates and fixes
   - mux driver file renames to be a bit "nicer"
   - intel_th driver updates
   - normal set of hyper-v updates and changes
   - small fpga subsystem and driver updates
   - lots of const code changes all over the driver trees
   - extcon driver updates
   - fmc driver subsystem upadates
   - w1 subsystem minor reworks and new features and drivers added
   - spmi driver updates
 
 Plus a smattering of other minor driver updates and fixes.
 
 All of these have been in linux-next with no reported issues for a
 while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWa1+Ew8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yl26wCgquufNylfhxr65NbJrovduJYzRnUAniCivXg8
 bePIh/JI5WxWoHK+wEbY
 =hYWx
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big char/misc driver update for 4.14-rc1.

  Lots of different stuff in here, it's been an active development cycle
  for some reason. Highlights are:

   - updated binder driver, this brings binder up to date with what
     shipped in the Android O release, plus some more changes that
     happened since then that are in the Android development trees.

   - coresight updates and fixes

   - mux driver file renames to be a bit "nicer"

   - intel_th driver updates

   - normal set of hyper-v updates and changes

   - small fpga subsystem and driver updates

   - lots of const code changes all over the driver trees

   - extcon driver updates

   - fmc driver subsystem upadates

   - w1 subsystem minor reworks and new features and drivers added

   - spmi driver updates

  Plus a smattering of other minor driver updates and fixes.

  All of these have been in linux-next with no reported issues for a
  while"

* tag 'char-misc-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (244 commits)
  ANDROID: binder: don't queue async transactions to thread.
  ANDROID: binder: don't enqueue death notifications to thread todo.
  ANDROID: binder: Don't BUG_ON(!spin_is_locked()).
  ANDROID: binder: Add BINDER_GET_NODE_DEBUG_INFO ioctl
  ANDROID: binder: push new transactions to waiting threads.
  ANDROID: binder: remove proc waitqueue
  android: binder: Add page usage in binder stats
  android: binder: fixup crash introduced by moving buffer hdr
  drivers: w1: add hwmon temp support for w1_therm
  drivers: w1: refactor w1_slave_show to make the temp reading functionality separate
  drivers: w1: add hwmon support structures
  eeprom: idt_89hpesx: Support both ACPI and OF probing
  mcb: Fix an error handling path in 'chameleon_parse_cells()'
  MCB: add support for SC31 to mcb-lpc
  mux: make device_type const
  char: virtio: constify attribute_group structures.
  Documentation/ABI: document the nvmem sysfs files
  lkdtm: fix spelling mistake: "incremeted" -> "incremented"
  perf: cs-etm: Fix ETMv4 CONFIGR entry in perf.data file
  nvmem: include linux/err.h from header
  ...
2017-09-05 11:08:17 -07:00
Linus Torvalds 44b1671fae Driver core update for 4.14-rc1
Here is the "big" driver core update for 4.14-rc1.
 
 It's really not all that big, the largest thing here being some firmware
 tests to help ensure that that crazy api is working properly.
 
 There's also a new uevent for when a driver is bound or unbound from a
 device, fixing a hole in the driver model that's been there since the
 very beginning.  Many thanks to Dmitry for being persistent and pointing
 out how wrong I was about this all along :)
 
 Patches for the new uevents are already in the systemd tree, if people
 want to play around with them.
 
 Otherwise just a number of other small api changes and updates here,
 nothing major.  All of these patches have been in linux-next for a
 while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWa1/IQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yn8jACfdQg+YXGxTExonxnyiWgoDMMSO2gAn1ETOaak
 itLO5ll4b6EQ0r3pU27d
 =pCYl
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core update from Greg KH:
 "Here is the "big" driver core update for 4.14-rc1.

  It's really not all that big, the largest thing here being some
  firmware tests to help ensure that that crazy api is working properly.

  There's also a new uevent for when a driver is bound or unbound from a
  device, fixing a hole in the driver model that's been there since the
  very beginning. Many thanks to Dmitry for being persistent and
  pointing out how wrong I was about this all along :)

  Patches for the new uevents are already in the systemd tree, if people
  want to play around with them.

  Otherwise just a number of other small api changes and updates here,
  nothing major. All of these patches have been in linux-next for a
  while with no reported issues"

* tag 'driver-core-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (28 commits)
  driver core: bus: Fix a potential double free
  Do not disable driver and bus shutdown hook when class shutdown hook is set.
  base: topology: constify attribute_group structures.
  base: Convert to using %pOF instead of full_name
  kernfs: Clarify lockdep name for kn->count
  fbdev: uvesafb: remove DRIVER_ATTR() usage
  xen: xen-pciback: remove DRIVER_ATTR() usage
  driver core: Document struct device:dma_ops
  mod_devicetable: Remove excess description from structured comment
  test_firmware: add batched firmware tests
  firmware: enable a debug print for batched requests
  firmware: define pr_fmt
  firmware: send -EINTR on signal abort on fallback mechanism
  test_firmware: add test case for SIGCHLD on sync fallback
  initcall_debug: add deferred probe times
  Input: axp20x-pek - switch to using devm_device_add_group()
  Input: synaptics_rmi4 - use devm_device_add_group() for attributes in F01
  Input: gpio_keys - use devm_device_add_group() for attributes
  driver core: add devm_device_add_group() and friends
  driver core: add device_{add|remove}_group() helpers
  ...
2017-09-05 10:41:21 -07:00
Linus Torvalds bf1d6b2c76 Staging/IIO driver updates for 4.14-rc1
Here is the big staging and IIO driver update for 4.14-rc1.
 
 Lots of staging driver fixes and cleanups, including some reorginizing
 of the lustre header files to try to impose some sanity on what is, and
 what is not, the uapi for that filesystem.
 
 There are some tty core changes in here as well, as the speakup drivers
 need them, and that's ok with me, they are sane and the speakup code is
 getting nicer because of it.
 
 There is also the addition of the obiligatory new wifi driver, just
 because it has been a release or two since we added our last one...
 
 Other than that, lots and lots of small coding style fixes, as usual.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWa2AbA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymboACfUsNhw+cJlVb25J70NULkye3y1PAAoJ+Ayq30
 ckkLGakZayKcYEx50ffH
 =KJwg
 -----END PGP SIGNATURE-----

Merge tag 'staging-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/IIO driver updates from Greg KH:
 "Here is the big staging and IIO driver update for 4.14-rc1.

  Lots of staging driver fixes and cleanups, including some reorginizing
  of the lustre header files to try to impose some sanity on what is,
  and what is not, the uapi for that filesystem.

  There are some tty core changes in here as well, as the speakup
  drivers need them, and that's ok with me, they are sane and the
  speakup code is getting nicer because of it.

  There is also the addition of the obiligatory new wifi driver, just
  because it has been a release or two since we added our last one...

  Other than that, lots and lots of small coding style fixes, as usual.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (612 commits)
  staging:rtl8188eu:core Fix remove unneccessary else block
  staging: typec: fusb302: make structure fusb302_psy_desc static
  staging: unisys: visorbus: make two functions static
  staging: fsl-dpaa2/eth: fix off-by-one FD ctrl bitmaks
  staging: r8822be: Simplify deinit_priv()
  staging: r8822be: Remove some dead code
  staging: vboxvideo: Use CONFIG_DRM_KMS_FB_HELPER to check for fbdefio availability
  staging:rtl8188eu Fix comparison to NULL
  staging: rts5208: rename mmc_ddr_tunning_rx_cmd to mmc_ddr_tuning_rx_cmd
  Staging: Pi433: style fix - tabs and spaces
  staging: pi433: fix spelling mistake: "preample" -> "preamble"
  staging:rtl8188eu:core Fix Code Indent
  staging: typec: fusb302: Export current-limit through a power_supply class dev
  staging: typec: fusb302: Add support for USB2 charger detection through extcon
  staging: typec: fusb302: Use client->irq as irq if set
  staging: typec: fusb302: Get max snk mv/ma/mw from device-properties
  staging: typec: fusb302: Set max supply voltage to 5V
  staging: typec: tcpm: Add get_current_limit tcpc_dev callback
  staging:rtl8188eu Use __func__ instead of function name
  staging: lustre: coding style fixes found by checkpatch.pl
  ...
2017-09-05 10:36:26 -07:00
Linus Torvalds 1a3b85ea36 USB/PHY driver updates for 4.14-rc1
Here is the large USB and PHY driver update for 4.14-rc1.
 
 Not all that exciting, a few new PHY drivers, the usual mess of gadget
 driver updates and fixes, and of course, xhci updates to try to tame
 that beast.
 
 A number of usb-serial updates and other small fixes all over the USB
 driver tree are in here as well.  Full details are in the shortlog.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWa2Buw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yk0VQCeK9SbD3sNVE0NXnwBYPTptghtr1EAoKwg96LG
 e4TUNAUcKadcDHJ8S81i
 =zy8S
 -----END PGP SIGNATURE-----

Merge tag 'usb-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY driver updates from Greg KH:
 "Here is the large USB and PHY driver update for 4.14-rc1.

  Not all that exciting, a few new PHY drivers, the usual mess of gadget
  driver updates and fixes, and of course, xhci updates to try to tame
  that beast.

  A number of usb-serial updates and other small fixes all over the USB
  driver tree are in here as well. Full details are in the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (171 commits)
  usbip: vhci-hcd: make vhci_hc_driver const
  usb: phy: Avoid unchecked dereference warning
  usb: imx21-hcd: make imx21_hc_driver const
  usb: host: make ehci_fsl_overrides const and __initconst
  dt-bindings: mt8173-mtu3: add generic compatible and rename file
  dt-bindings: mt8173-xhci: add generic compatible and rename file
  usb: xhci-mtk: add generic compatible string
  usbip: auto retry for concurrent attach
  USB: serial: option: simplify 3 D-Link device entries
  USB: serial: option: add support for D-Link DWM-157 C1
  usb: core: usbport: fix "BUG: key not in .data" when lockdep is enabled
  usb: chipidea: usb2: check memory allocation failure
  usb: Add device quirk for Logitech HD Pro Webcam C920-C
  usb: misc: lvstest: add entry to place port in compliance mode
  usb: xhci: Support enabling of compliance mode for xhci 1.1
  usb:xhci:Fix regression when ATI chipsets detected
  usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard
  usb: gadget: make snd_pcm_hardware const
  usb: common: use of_property_read_bool()
  USB: core: constify vm_operations_struct
  ...
2017-09-05 10:26:01 -07:00
Linus Torvalds f32c9e059e Merge branch 'parisc-4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
 "Major changes include:

   - Full support of the firmware Page Deallocation Table with
     MADV_HWPOISON and MADV_SOFT_OFFLINE. A kernel thread scans
     regularily for new bad memory pages.

   - Full support for self-extracting kernel.

   - Added UBSAN support.

   - Lots of section mismatch fixes across all parisc drivers.

   - Added examples for %pF and %pS usage in printk-formats.txt"

* 'parisc-4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: (28 commits)
  printk-formats.txt: Add examples for %pF and %pS usage
  parisc: Fix up devices below a PCI-PCI MegaRAID controller bridge
  parisc/core: Fix section mismatches
  parisc/ipmi_si_intf: Fix section mismatches on parisc platform
  parisc/input/hilkbd: Fix section mismatches
  parisc/net/lasi_82596: Fix section mismatches
  parisc/serio: Fix section mismatches in gscps2 and hp_sdc drivers
  parisc: Fix section mismatches in parisc core drivers
  parisc/parport_gsc: Fix section mismatches
  parisc/scsi/lasi700: Fix section mismatches
  parisc/scsi/zalon: Fix section mismatches
  parisc/8250_gsc: Fix section mismatches
  parisc/mux: Fix section mismatches
  parisc/sticore: Fix section mismatches
  parisc/harmony: Fix section mismatches
  parisc: Wire up support for self-extracting kernel
  parisc: Make existing core files reuseable for bootloader
  parisc: Add core code for self-extracting kernel
  parisc: Enable UBSAN support
  parisc/random: Add machine specific randomness
  ...
2017-09-05 09:37:11 -07:00
Ingo Molnar 770e961255 perf/core improvements and fixes:
- Support syscall name glob matching in 'perf trace' (Arnaldo Carvalho de Melo)
 
   e.g.:
 
    # perf trace -e pkey_*
    32.784 (0.006 ms): pkey/16018 pkey_alloc(init_val: DISABLE_WRITE) = -1 EINVAL Invalid argument
    32.795 (0.004 ms): pkey/16018 pkey_mprotect(start: 0x7f380d0a6000, len: 4096, prot: READ|WRITE, pkey: -1) = 0
    32.801 (0.002 ms): pkey/16018 pkey_free(pkey: -1                ) = -1 EINVAL Invalid argument
    ^C#
 
 - Do not auto merge counts for explicitely specified events in
   'perf stat' (Arnaldo Carvalho de Melo)
 
 - Fix syntax in documentation of .perfconfig intel-pt option (Jack Henschel)
 
 - Calculate the average cycles of iterations for loops detected by the
   branch history support in 'perf report' (Jin Yao)
 
 - Support PERF_SAMPLE_PHYS_ADDR as a sort key "phys_daddr" in the 'script', 'mem',
   'top' and 'report'. Also add a test entry for it in 'perf test' (Kan Liang)
 
 - Fix 'Object code reading' 'perf test' entry in PowerPC (Ravi Bangoria)
 
 - Remove some duplicate Power9 duplicate vendor events (described in JSON
   files) (Sukadev Bhattiprolu)
 
 - Add help entry in the TUI annotate browser about cycling thru hottest
   instructions with TAB/shift+TAB (Arnaldo Carvalho de Melo)
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEELb9bqkb7Te0zijNb1lAW81NSqkAFAlmpouQACgkQ1lAW81NS
 qkAs/Q/+OyKNSxZKgptHaR8ZDxOKPLr7hKCEfCMzRuTX22xhFGHsa5YYACQuGqe+
 dLfsblxbhsR6kVP/bLpCg9/jtfCc8N0pKHJKnwqpMGC46qmeW9orduA0PI6j0Dpj
 Um2aSCCoG5gISO6ojCDFBUpCY8NK+rLLWzQB7jNids0x/cB2A+pvzxSQlIZVuGuD
 E4D2G7smAcWCOs4ZPHtKnqPeizLwKp8Idu1/lwU2N4ZpjTk20l3olI++NO/ZZPfP
 g4XPE7Uhs4zoEkb7wXOrAjsOhPgRgPPR0gvoz/EeVSZMtuL39aZeCDcArgOBynR2
 5BLYMAEXOAWt7K+JfR2VxVr/tRz0tAPJC0Pw4QssmLni50O/uLuoHSCg/+zBPwNP
 Y++rsXMqt5XnxeRejye+8onfITpXBX1FTAEe3T1u3wvbAwD3EWpBpQyco8ghT9Jc
 Qai85FrN47cAkrbqZtjt1qzqD4qujJMgnAXWccc3jjjcywPijKSZje5v2Oh0Qhg4
 sf2Zf+efhXWxvBfBuHpiC5eT2NPnzA1ryBmpVn5q6TbJGVIgFIwrc9/iE3Z+WWtr
 cy0lYGRmLXeugwvsZSu/82g5uO/dm9HJz1FeIAj5OBISK+RcbBzuuERBNXbQ186S
 KSxrYeUgIxYolA0W9N7kGGwyvntEmCeAgMuK4/9Arml2Mw9+3qQ=
 =pjbo
 -----END PGP SIGNATURE-----

Merge tag 'perf-core-for-mingo-4.14-20170901' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

- Support syscall name glob matching in 'perf trace' (Arnaldo Carvalho de Melo)

  e.g.:

   # perf trace -e pkey_*
   32.784 (0.006 ms): pkey/16018 pkey_alloc(init_val: DISABLE_WRITE) = -1 EINVAL Invalid argument
   32.795 (0.004 ms): pkey/16018 pkey_mprotect(start: 0x7f380d0a6000, len: 4096, prot: READ|WRITE, pkey: -1) = 0
   32.801 (0.002 ms): pkey/16018 pkey_free(pkey: -1                ) = -1 EINVAL Invalid argument
   ^C#

- Do not auto merge counts for explicitely specified events in
  'perf stat' (Arnaldo Carvalho de Melo)

- Fix syntax in documentation of .perfconfig intel-pt option (Jack Henschel)

- Calculate the average cycles of iterations for loops detected by the
  branch history support in 'perf report' (Jin Yao)

- Support PERF_SAMPLE_PHYS_ADDR as a sort key "phys_daddr" in the 'script', 'mem',
  'top' and 'report'. Also add a test entry for it in 'perf test' (Kan Liang)

- Fix 'Object code reading' 'perf test' entry in PowerPC (Ravi Bangoria)

- Remove some duplicate Power9 duplicate vendor events (described in JSON
  files) (Sukadev Bhattiprolu)

- Add help entry in the TUI annotate browser about cycling thru hottest
  instructions with TAB/shift+TAB (Arnaldo Carvalho de Melo)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-05 07:14:28 +02:00
Linus Torvalds dd90cccffc Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
 "A rather small update for the time(r) subsystem:

   - A new clocksource driver IMX-TPM

   - Minor fixes to the alarmtimer facility

   - Device tree cleanups for Renesas drivers

   - A new kselftest and fixes for the timer related tests

   - Conversion of the clocksource drivers to use %pOF

   - Use the proper helpers to access rlimits in the posix-cpu-timer
     code"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  alarmtimer: Ensure RTC module is not unloaded
  clocksource: Convert to using %pOF instead of full_name
  clocksource/drivers/bcm2835: Remove message for a memory allocation failure
  devicetree: bindings: Remove deprecated properties
  devicetree: bindings: Remove unused 32-bit CMT bindings
  devicetree: bindings: Deprecate property, update example
  devicetree: bindings: r8a73a4 and R-Car Gen2 CMT bindings
  devicetree: bindings: R-Car Gen2 CMT0 and CMT1 bindings
  devicetree: bindings: Remove sh7372 CMT binding
  clocksource/drivers/imx-tpm: Add imx tpm timer support
  dt-bindings: timer: Add nxp tpm timer binding doc
  posix-cpu-timers: Use dedicated helper to access rlimit values
  alarmtimer: Fix unavailable wake-up source in sysfs
  timekeeping: Use proper timekeeper for debug code
  kselftests: timers: set-timer-lat: Add one-shot timer test cases
  kselftests: timers: set-timer-lat: Tweak reporting when timer fires early
  kselftests: timers: freq-step: Fix build warning
  kselftests: timers: freq-step: Define ADJ_SETOFFSET if device has older kernel headers
2017-09-04 13:06:34 -07:00
Linus Torvalds b0c79f49c3 Merge branch 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm updates from Ingo Molnar:

 - Introduce the ORC unwinder, which can be enabled via
   CONFIG_ORC_UNWINDER=y.

   The ORC unwinder is a lightweight, Linux kernel specific debuginfo
   implementation, which aims to be DWARF done right for unwinding.
   Objtool is used to generate the ORC unwinder tables during build, so
   the data format is flexible and kernel internal: there's no
   dependency on debuginfo created by an external toolchain.

   The ORC unwinder is almost two orders of magnitude faster than the
   (out of tree) DWARF unwinder - which is important for perf call graph
   profiling. It is also significantly simpler and is coded defensively:
   there has not been a single ORC related kernel crash so far, even
   with early versions. (knock on wood!)

   But the main advantage is that enabling the ORC unwinder allows
   CONFIG_FRAME_POINTERS to be turned off - which speeds up the kernel
   measurably:

   With frame pointers disabled, GCC does not have to add frame pointer
   instrumentation code to every function in the kernel. The kernel's
   .text size decreases by about 3.2%, resulting in better cache
   utilization and fewer instructions executed, resulting in a broad
   kernel-wide speedup. Average speedup of system calls should be
   roughly in the 1-3% range - measurements by Mel Gorman [1] have shown
   a speedup of 5-10% for some function execution intense workloads.

   The main cost of the unwinder is that the unwinder data has to be
   stored in RAM: the memory cost is 2-4MB of RAM, depending on kernel
   config - which is a modest cost on modern x86 systems.

   Given how young the ORC unwinder code is it's not enabled by default
   - but given the performance advantages the plan is to eventually make
   it the default unwinder on x86.

   See Documentation/x86/orc-unwinder.txt for more details.

 - Remove lguest support: its intended role was that of a temporary
   proof of concept for virtualization, plus its removal will enable the
   reduction (removal) of the paravirt API as well, so Rusty agreed to
   its removal. (Juergen Gross)

 - Clean up and fix FSGS related functionality (Andy Lutomirski)

 - Clean up IO access APIs (Andy Shevchenko)

 - Enhance the symbol namespace (Jiri Slaby)

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits)
  objtool: Handle GCC stack pointer adjustment bug
  x86/entry/64: Use ENTRY() instead of ALIGN+GLOBAL for stub32_clone()
  x86/fpu/math-emu: Add ENDPROC to functions
  x86/boot/64: Extract efi_pe_entry() from startup_64()
  x86/boot/32: Extract efi_pe_entry() from startup_32()
  x86/lguest: Remove lguest support
  x86/paravirt/xen: Remove xen_patch()
  objtool: Fix objtool fallthrough detection with function padding
  x86/xen/64: Fix the reported SS and CS in SYSCALL
  objtool: Track DRAP separately from callee-saved registers
  objtool: Fix validate_branch() return codes
  x86: Clarify/fix no-op barriers for text_poke_bp()
  x86/switch_to/64: Rewrite FS/GS switching yet again to fix AMD CPUs
  selftests/x86/fsgsbase: Test selectors 1, 2, and 3
  x86/fsgsbase/64: Report FSBASE and GSBASE correctly in core dumps
  x86/fsgsbase/64: Fully initialize FS and GS state in start_thread_common
  x86/asm: Fix UNWIND_HINT_REGS macro for older binutils
  x86/asm/32: Fix regs_get_register() on segment registers
  x86/xen/64: Rearrange the SYSCALL entries
  x86/asm/32: Remove a bunch of '& 0xffff' from pt_regs segment reads
  ...
2017-09-04 09:52:57 -07:00
Linus Torvalds 9657752cb5 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
 "Kernel side changes:

   - Add branch type profiling/tracing support. (Jin Yao)

   - Add the PERF_SAMPLE_PHYS_ADDR ABI to allow the tracing/profiling of
     physical memory addresses, where the PMU supports it. (Kan Liang)

   - Export some PMU capability details in the new
     /sys/bus/event_source/devices/cpu/caps/ sysfs directory. (Andi
     Kleen)

   - Aux data fixes and updates (Will Deacon)

   - kprobes fixes and updates (Masami Hiramatsu)

   - AMD uncore PMU driver fixes and updates (Janakarajan Natarajan)

  On the tooling side, here's a (limited!) list of highlights - there
  were many other changes that I could not list, see the shortlog and
  git history for details:

  UI improvements:

   - Implement a visual marker for fused x86 instructions in the
     annotate TUI browser, available now in 'perf report', more work
     needed to have it available as well in 'perf top' (Jin Yao)

     Further explanation from one of Jin's patches:

             │   ┌──cmpl   $0x0,argp_program_version_hook
       81.93 │   ├──je     20
             │   │  lock   cmpxchg %esi,0x38a9a4(%rip)
             │   │↓ jne    29
             │   │↓ jmp    43
       11.47 │20:└─→cmpxch %esi,0x38a999(%rip)

     That means the cmpl+je is a fused instruction pair and they should
     be considered together.

   - Record the branch type and then show statistics and info about in
     callchain entries (Jin Yao)

     Example from one of Jin's patches:

        # perf record -g -j any,save_type
        # perf report --branch-history --stdio --no-children

        38.50%  div.c:45                [.] main                    div
                |
                ---main div.c:42 (RET CROSS_2M cycles:2)
                   compute_flag div.c:28 (cycles:2)
                   compute_flag div.c:27 (RET CROSS_2M cycles:1)
                   rand rand.c:28 (cycles:1)
                   rand rand.c:28 (RET CROSS_2M cycles:1)
                   __random random.c:298 (cycles:1)
                   __random random.c:297 (COND_BWD CROSS_2M cycles:1)
                   __random random.c:295 (cycles:1)
                   __random random.c:295 (COND_BWD CROSS_2M cycles:1)
                   __random random.c:295 (cycles:1)
                   __random random.c:295 (RET CROSS_2M cycles:9)

  namespaces support:

   - Add initial support for namespaces, using setns to access files in
     namespaces, grabbing their build-ids, etc. (Krister Johansen)

  perf trace enhancements:

   - Beautify pkey_{alloc,free,mprotect} arguments in 'perf trace'
     (Arnaldo Carvalho de Melo)

   - Add initial 'clone' syscall args beautifier in 'perf trace'
     (Arnaldo Carvalho de Melo)

   - Ignore 'fd' and 'offset' args for MAP_ANONYMOUS in 'perf trace'
     (Arnaldo Carvalho de Melo)

   - Beautifiers for the 'cmd' arg of several ioctl types, including:
     sound, DRM, KVM, vhost virtio and perf_events. (Arnaldo Carvalho de
     Melo)

   - Add PERF_SAMPLE_CALLCHAIN and PERF_RECORD_MMAP[2] to 'perf data'
     CTF conversion, allowing CTF trace visualization tools to show
     callchains and to resolve symbols (Geneviève Bastien)

   - Beautify the fcntl syscall, which is an interesting one in the
     sense that infrastructure had to be put in place to change the
     formatters of some arguments according to the value in a previous
     one, i.e. cmd dictates how arg and the syscall return will be
     formatted. (Arnaldo Carvalho de Melo

  perf stat enhancements:

   - Use group read for event groups in 'perf stat', reducing overhead
     when groups are defined in the event specification, i.e. when using
     {} to enclose a list of events, asking them to be read at the same
     time, e.g.: "perf stat -e '{cycles,instructions}'" (Jiri Olsa)

  pipe mode improvements:

   - Process tracing data in 'perf annotate' pipe mode (David
     Carrillo-Cisneros)

   - Add header record types to pipe-mode, now this command:

        $ perf record -o - -e cycles sleep 1 | perf report --stdio --header

     Will show the same as in non-pipe mode, i.e. involving a perf.data
     file (David Carrillo-Cisneros)

  Vendor specific hardware event support updates/enhancements:

   - Update POWER9 vendor events tables (Sukadev Bhattiprolu)

   - Add POWER9 PMU events Sukadev (Bhattiprolu)

   - Support additional POWER8+ PVR in PMU mapfile (Shriya)

   - Add Skylake server uncore JSON vendor events (Andi Kleen)

   - Support exporting Intel PT data to sqlite3 with python perf
     scripts, this is in addition to the postgresql support that was
     already there (Adrian Hunter)"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (253 commits)
  perf symbols: Fix plt entry calculation for ARM and AARCH64
  perf probe: Fix kprobe blacklist checking condition
  perf/x86: Fix caps/ for !Intel
  perf/core, x86: Add PERF_SAMPLE_PHYS_ADDR
  perf/core, pt, bts: Get rid of itrace_started
  perf trace beauty: Beautify pkey_{alloc,free,mprotect} arguments
  tools headers: Sync cpu features kernel ABI headers with tooling headers
  perf tools: Pass full path of FEATURES_DUMP
  perf tools: Robustify detection of clang binary
  tools lib: Allow external definition of CC, AR and LD
  perf tools: Allow external definition of flex and bison binary names
  tools build tests: Don't hardcode gcc name
  perf report: Group stat values on global event id
  perf values: Zero value buffers
  perf values: Fix allocation check
  perf values: Fix thread index bug
  perf report: Add dump_read function
  perf record: Set read_format for inherit_stat
  perf c2c: Fix remote HITM detection for Skylake
  perf tools: Fix static build with newer toolchains
  ...
2017-09-04 08:39:02 -07:00
Linus Torvalds 0081a0ce80 Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnad:
 "The main RCU related changes in this cycle were:

   - Removal of spin_unlock_wait()
   - SRCU updates
   - RCU torture-test updates
   - RCU Documentation updates
   - Extend the sys_membarrier() ABI with the MEMBARRIER_CMD_PRIVATE_EXPEDITED variant
   - Miscellaneous RCU fixes
   - CPU-hotplug fixes"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (63 commits)
  arch: Remove spin_unlock_wait() arch-specific definitions
  locking: Remove spin_unlock_wait() generic definitions
  drivers/ata: Replace spin_unlock_wait() with lock/unlock pair
  ipc: Replace spin_unlock_wait() with lock/unlock pair
  exit: Replace spin_unlock_wait() with lock/unlock pair
  completion: Replace spin_unlock_wait() with lock/unlock pair
  doc: Set down RCU's scheduling-clock-interrupt needs
  doc: No longer allowed to use rcu_dereference on non-pointers
  doc: Add RCU files to docbook-generation files
  doc: Update memory-barriers.txt for read-to-write dependencies
  doc: Update RCU documentation
  membarrier: Provide expedited private command
  rcu: Remove exports from rcu_idle_exit() and rcu_idle_enter()
  rcu: Add warning to rcu_idle_enter() for irqs enabled
  rcu: Make rcu_idle_enter() rely on callers disabling irqs
  rcu: Add assertions verifying blocked-tasks list
  rcu/tracing: Set disable_rcu_irq_enter on rcu_eqs_exit()
  rcu: Add TPS() protection for _rcu_barrier_trace strings
  rcu: Use idle versions of swait to make idle-hack clear
  swait: Add idle variants which don't contribute to load average
  ...
2017-09-04 08:13:52 -07:00
Mark Brown 2dcfd2814b Merge remote-tracking branches 'spi/topic/sh-msiof', 'spi/topic/stm32', 'spi/topic/sunxi', 'spi/topic/tegra' and 'spi/topic/tools' into spi-next 2017-09-04 15:51:30 +01:00
Rafael J. Wysocki d97561f461 Merge branch 'pm-tools'
* pm-tools:
  tools/power/cpupower: allow running without cpu0
  pm-graph: package makefile and man pages
  pm-graph: AnalyzeBoot v2.1
  pm-graph: AnalyzeSuspend v4.7
2017-09-04 00:07:36 +02:00
Rafael J. Wysocki b2a84eedca Merge branch 'acpica'
* acpica: (32 commits)
  ACPICA: Update version to 20170728
  ACPICA: Revert "Update resource descriptor handling"
  ACPICA: Resources: Allow _DMA method in walk resources
  ACPICA: Ensure all instances of AE_AML_INTERNAL have error messages
  ACPICA: Implement deferred resolution of reference package elements
  ACPICA: Debugger: Improve support for Alias objects
  ACPICA: Interpreter: Update handling for Alias operator
  ACPICA: EFI/EDK2: Cleanup to enable /WX for MSVC builds
  ACPICA: acpidump: Add DSDT/FACS instance support for Linux and EFI
  ACPICA: CLib: Add short multiply/shift support
  ACPICA: EFI/EDK2: Sort acpi.h inclusion order
  ACPICA: Add a comment, no functional change
  ACPICA: Namespace: Update/fix an error message
  ACPICA: iASL: Add support for the SDEI table
  ACPICA: Divergences: reduce access size definitions
  ACPICA: Update version to 20170629
  ACPICA: Update resource descriptor handling
  ACPICA: iasl: Update to IORT SMMUv3 disassembling
  ACPICA: Disassembler: skip parsing of incorrect external declarations
  ACPICA: iASL: Ensure that the target node is valid in acpi_ex_create_alias
  ...
2017-09-03 23:53:05 +02:00
David S. Miller 6026e043d0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Three cases of simple overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01 17:42:05 -07:00
Arnaldo Carvalho de Melo eba9fac017 perf annotate browser: Help for cycling thru hottest instructions with TAB/shift+TAB
The popup help accessed via 'h' wasn't mentioning about TAB and
shift-TAB, just about 'H', which goes to the hottest line, while the
former two are the hotkeys for actually cycling thru the hottest lines.

Reported-by: Flavio Bruno Leitner <fbl@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-5ppym6odizfj1ifa4t7neiku@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-09-01 14:55:40 -03:00