qemu-e2k/Makefile.target

205 lines
5.5 KiB
Makefile
Raw Normal View History

# -*- Mode: makefile -*-
include ../config-host.mak
include config-devices.mak
include config-target.mak
include $(SRC_PATH)/rules.mak
$(call set-vpath, $(SRC_PATH))
ifdef CONFIG_LINUX
QEMU_CFLAGS += -I../linux-headers
endif
QEMU_CFLAGS += -I.. -I$(SRC_PATH)/target-$(TARGET_BASE_ARCH) -DNEED_CPU_H
QEMU_CFLAGS+=-I$(SRC_PATH)/include
ifdef CONFIG_USER_ONLY
# user emulator name
QEMU_PROG=qemu-$(TARGET_ARCH2)
else
# system emulator name
ifneq (,$(findstring -mwindows,$(LIBS)))
# Terminate program name with a 'w' because the linker builds a windows executable.
QEMU_PROGW=qemu-system-$(TARGET_ARCH2)w$(EXESUF)
endif # windows executable
QEMU_PROG=qemu-system-$(TARGET_ARCH2)$(EXESUF)
endif
PROGS=$(QEMU_PROG)
ifdef QEMU_PROGW
PROGS+=$(QEMU_PROGW)
endif
STPFILES=
ifndef CONFIG_HAIKU
LIBS+=-lm
endif
config-target.h: config-target.h-timestamp
config-target.h-timestamp: config-target.mak
ifdef CONFIG_TRACE_SYSTEMTAP
stap: $(QEMU_PROG).stp
ifdef CONFIG_USER_ONLY
TARGET_TYPE=user
else
TARGET_TYPE=system
endif
$(QEMU_PROG).stp: $(SRC_PATH)/trace-events
$(call quiet-command,$(TRACETOOL) \
--format=stap \
--backend=$(TRACE_BACKEND) \
--binary=$(bindir)/$(QEMU_PROG) \
--target-arch=$(TARGET_ARCH) \
--target-type=$(TARGET_TYPE) \
< $< > $@," GEN $(QEMU_PROG).stp")
else
stap:
endif
all: $(PROGS) stap
# Dummy command so that make thinks it has done something
@true
#########################################################
# cpu emulator library
obj-y = exec.o translate-all.o cpu-exec.o
obj-y += tcg/tcg.o tcg/optimize.o
obj-$(CONFIG_TCG_INTERPRETER) += tci.o
obj-y += fpu/softfloat.o
obj-y += disas.o
obj-$(CONFIG_TCI_DIS) += tci-dis.o
obj-y += target-$(TARGET_BASE_ARCH)/
obj-$(CONFIG_GDBSTUB_XML) += gdbstub-xml.o
tci-dis.o: QEMU_CFLAGS += -I$(SRC_PATH)/tcg -I$(SRC_PATH)/tcg/tci
#########################################################
# Linux user emulator target
ifdef CONFIG_LINUX_USER
QEMU_CFLAGS+=-I$(SRC_PATH)/linux-user/$(TARGET_ABI_DIR) -I$(SRC_PATH)/linux-user
obj-y += linux-user/
obj-y += gdbstub.o thunk.o user-exec.o $(oslib-obj-y)
endif #CONFIG_LINUX_USER
#########################################################
# BSD user emulator target
ifdef CONFIG_BSD_USER
QEMU_CFLAGS+=-I$(SRC_PATH)/bsd-user -I$(SRC_PATH)/bsd-user/$(TARGET_ARCH)
obj-y += bsd-user/
obj-y += gdbstub.o user-exec.o $(oslib-obj-y)
endif #CONFIG_BSD_USER
#########################################################
# System emulator target
ifdef CONFIG_SOFTMMU
CONFIG_NO_PCI = $(if $(subst n,,$(CONFIG_PCI)),n,y)
CONFIG_NO_KVM = $(if $(subst n,,$(CONFIG_KVM)),n,y)
CONFIG_NO_XEN = $(if $(subst n,,$(CONFIG_XEN)),n,y)
CONFIG_NO_GET_MEMORY_MAPPING = $(if $(subst n,,$(CONFIG_HAVE_GET_MEMORY_MAPPING)),n,y)
CONFIG_NO_CORE_DUMP = $(if $(subst n,,$(CONFIG_HAVE_CORE_DUMP)),n,y)
obj-y += arch_init.o cpus.o monitor.o gdbstub.o balloon.o ioport.o
obj-y += hw/
obj-$(CONFIG_KVM) += kvm-all.o
obj-$(CONFIG_NO_KVM) += kvm-stub.o
obj-y += memory.o savevm.o cputlb.o
obj-$(CONFIG_HAVE_GET_MEMORY_MAPPING) += memory_mapping.o
obj-$(CONFIG_HAVE_CORE_DUMP) += dump.o
obj-$(CONFIG_NO_GET_MEMORY_MAPPING) += memory_mapping-stub.o
obj-$(CONFIG_NO_CORE_DUMP) += dump-stub.o
LIBS+=-lz
QEMU_CFLAGS += $(VNC_TLS_CFLAGS)
QEMU_CFLAGS += $(VNC_SASL_CFLAGS)
QEMU_CFLAGS += $(VNC_JPEG_CFLAGS)
QEMU_CFLAGS += $(VNC_PNG_CFLAGS)
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
# xen support
obj-$(CONFIG_XEN) += xen-all.o xen-mapcache.o
obj-$(CONFIG_NO_XEN) += xen-stub.o
# Hardware support
ifeq ($(TARGET_ARCH), sparc64)
obj-y += hw/sparc64/
else
obj-y += hw/$(TARGET_BASE_ARCH)/
endif
main.o: QEMU_CFLAGS+=$(GPROF_CFLAGS)
GENERATED_HEADERS += hmp-commands.h qmp-commands-old.h
endif # CONFIG_SOFTMMU
nested-vars += obj-y
# This resolves all nested paths, so it must come last
include $(SRC_PATH)/Makefile.objs
all-obj-y = $(obj-y)
all-obj-y += $(addprefix ../, $(universal-obj-y))
ifdef CONFIG_SOFTMMU
all-obj-y += $(addprefix ../, $(common-obj-y))
all-obj-y += $(addprefix ../libdis/, $(libdis-y))
all-obj-y += $(addprefix ../, $(trace-obj-y))
else
all-obj-y += $(addprefix ../libuser/, $(user-obj-y))
all-obj-y += $(addprefix ../libdis-user/, $(libdis-y))
endif #CONFIG_LINUX_USER
ifdef QEMU_PROGW
# The linker builds a windows executable. Make also a console executable.
$(QEMU_PROGW): $(all-obj-y) ../libqemustub.a
$(call LINK,$^)
$(QEMU_PROG): $(QEMU_PROGW)
$(call quiet-command,$(OBJCOPY) --subsystem console $(QEMU_PROGW) $(QEMU_PROG)," GEN $(TARGET_DIR)$(QEMU_PROG)")
else
$(QEMU_PROG): $(all-obj-y) ../libqemustub.a
$(call LINK,$^)
endif
gdbstub-xml.c: $(TARGET_XML_FILES) $(SRC_PATH)/scripts/feature_to_c.sh
$(call quiet-command,rm -f $@ && $(SHELL) $(SRC_PATH)/scripts/feature_to_c.sh $@ $(TARGET_XML_FILES)," GEN $(TARGET_DIR)$@")
hmp-commands.h: $(SRC_PATH)/hmp-commands.hx
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@," GEN $(TARGET_DIR)$@")
qmp-commands-old.h: $(SRC_PATH)/qmp-commands.hx
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@," GEN $(TARGET_DIR)$@")
clean:
rm -f *.a *~ $(PROGS)
rm -f $(shell find . -name '*.[od]')
rm -f hmp-commands.h qmp-commands-old.h gdbstub-xml.c
ifdef CONFIG_TRACE_SYSTEMTAP
rm -f *.stp
endif
install: all
ifneq ($(PROGS),)
$(INSTALL) -m 755 $(PROGS) "$(DESTDIR)$(bindir)"
ifneq ($(STRIP),)
$(STRIP) $(patsubst %,"$(DESTDIR)$(bindir)/%",$(PROGS))
endif
endif
ifdef CONFIG_TRACE_SYSTEMTAP
$(INSTALL_DIR) "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset"
$(INSTALL_DATA) $(QEMU_PROG).stp "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset"
endif
GENERATED_HEADERS += config-target.h
Makefile: $(GENERATED_HEADERS)